source: CONFIG/IPSLCM/IPSLCM5A/Chistorical/COMP/lmdz.driver @ 1546

#!/bin/ksh
#-----------------------------------------------------------------
function LMDZ_sed
{
    IGCM_debug_PushStack "LMDZ_sed"

    sed -e "s/^${2}\ *=.*/${2}= ${3}/" ${1} > ${1}.tmp
    RET=$?
    echo "LMDZ_sed : ${1} ${2} ${3}"
    \mv ${1}.tmp ${1}

    IGCM_debug_PopStack "LMDZ_sed"
    return $RET
}

function ATM_Initialize
{
    IGCM_debug_PushStack "ATM_Initialize"

    RESOL_ATM=$( echo $RESOL | awk "-Fx" '{print $2}' | awk "-F-" '{print $1}')

    [ -f ${SUBMIT_DIR}/../.resol ] && eval $(grep RESOL_ATM_3D ${SUBMIT_DIR}/../.resol) || RESOL_ATM_3D=96x95x19

    RESOL_ATM_Z=$( echo ${RESOL_ATM_3D} | awk "-Fx" '{print $3}' )

    ##-- Calendar type for LMDZ
    case ${config_UserChoices_CalendarType} in
        leap|gregorian)
            CalendarTypeForLmdz=earth_366d;;
        noleap)
            CalendarTypeForLmdz=earth_365d;;
        360d)
            CalendarTypeForLmdz=earth_360d;;
        *)
            CalendarTypeForLmdz=earth_360d
    esac

    ##--Frequency purpose ....
    ##--  Initialisation  ....
    OK_instan=n
    OK_journe=n
    OK_mensuel=n
    ok_hf=n

    case ${config_UserChoices_PeriodLength} in
        1Y|1y|1M|1m) OK_mensuel=y ;;
        5D|5d|1D|1d) OK_journe=y ;;
    esac

    for frequency in ${config_ATM_WriteFrequency} ; do
        case ${frequency} in
            5D|5d|1D|1d) OK_journe=y ;;
        esac
        case ${frequency} in
            HF|hf) 
                ok_hf=y
                OK_instan=y
                ;;
        esac
    done

    ## Read LMDZ_NbPeriod_adjust option in lmdz.card 
    IGCM_card_DefineVariableFromOption ${SUBMIT_DIR}/COMP/lmdz.card UserChoices LMDZ_NbPeriod_adjust
    LMDZ_NbPeriod_adjust=${lmdz_UserChoices_LMDZ_NbPeriod_adjust}

    if [ ${LMDZ_NbPeriod_adjust} -eq 0 ] ; then
        IGCM_card_DefineVariableFromOption ${SUBMIT_DIR}/COMP/lmdz.card UserChoices LMDZ_Bands_file_name
        LMDZ_Bands_file_name=${lmdz_UserChoices_LMDZ_Bands_file_name}
    fi

    ##  Read LMDZ_Freq_aero and LMDZ_Length_aero in lmdz.card
    LMDZ_Freq_aero=${lmdz_UserChoices_LMDZ_Freq_aero}
    LMDZ_Length_aero=${lmdz_UserChoices_LMDZ_Length_aero}

    ##  Read LMDZ_COSP_monthly  LMDZ_COSP_daily and LMDZ_COSP_hf in lmdz.card
    LMDZ_COSP_OK=${lmdz_UserChoices_LMDZ_COSP_OK}
    LMDZ_COSP_monthly=${lmdz_UserChoices_LMDZ_COSP_monthly}
    LMDZ_COSP_daily=${lmdz_UserChoices_LMDZ_COSP_daily}
    LMDZ_COSP_hf=${lmdz_UserChoices_LMDZ_COSP_hf}

    ##  Read LMDZ_NMC_monthly  LMDZ_NMC_daily and LMDZ_NMC_hf in lmdz.card
    LMDZ_NMC_monthly=${lmdz_UserChoices_LMDZ_NMC_monthly}
    LMDZ_NMC_daily=${lmdz_UserChoices_LMDZ_NMC_daily}
    LMDZ_NMC_hf=${lmdz_UserChoices_LMDZ_NMC_hf}

    IGCM_debug_PopStack "ATM_Initialize"
}

#-----------------------------------------------------------------
function ATM_Update
{
    IGCM_debug_PushStack "ATM_Update"

    typeset InitPeriodCo2 InitDateBeginCo2 InitDateEndCo2
    typeset CO2SBG CO2MBG CO2LU CO2_ppm CO2_ppm_prec fCO2_ff
    typeset PathCO2log 

    case ${config_UserChoices_PeriodLength} in
        *Y|*y) 
               LMDZ_ecrit_mth=30. 
               LMDZ_ecrit_ISCCP=30.
               LMDZ_periodav=30.
               if [ "${config_UserChoices_CalendarType}" != "360d" ] ; then
                  echo Change calendartype in config.card. PeriodLength=1Y allowed only for CalendarType=360d 
                  exit
               fi
               ;;
        *)
               LMDZ_ecrit_mth=${PeriodLengthInDays}.
               LMDZ_ecrit_ISCCP=${PeriodLengthInDays}.
               LMDZ_periodav=${PeriodLengthInDays}.
               ;;
    esac

    ##-- Remise ou non a zero de la date initiale de LMDZ pour le fichier run.def
    if [ ${CumulPeriod} -eq 1 ] ; then
        RAZ_DATE=1
    else
        RAZ_DATE=0
    fi

    ## To have more variables in output files for aerosols. Parameters are set in lmdz.card
    #if [ ${CumulPeriod}%${LMDZ_Freq_aero} -le ${LMDZ_Length_aero} ]; then
    #   if [ ${CumulPeriod}%${LMDZ_Freq_aero} -ne 0 ]; then 
    #      lev_histmth=4
    #   else
    #      lev_histmth=2    
    #   fi
    #else
    #   lev_histmth=2
    #fi    

    ## algo : For CumulPeriod=1 ; 
    ##        IF NbPeriod_Adjust = 0, Get Bands file directly from server, store it with _0 suffix
    ##        ELSE LMDZ_adjust=y ; save Bands file on file server ;
    ##        For CumulPeriod=2 to LMDZ_NbPeriod_adjust ; Get Bands file from server (CumulPeriod-1) ; LMDZ_adjust=y ; save Bands file on file server ;
    ##        For CumulPeriod > LMDZ_NbPeriod_adjust ; LMDZ_adjust=n ; Get Bands file from server (CumulPeriod=LMDZ_NbPeriod_adjust 0 to force it) ; Use Bands ;

    if [ ${CumulPeriod} -eq 1 ] ; then
        if [ ${LMDZ_NbPeriod_adjust} -eq 0 ] ; then
            IGCM_sys_Get ${LMDZ_Bands_file_name} Bands_${RESOL_ATM_3D}_${NUM_PROC_ATM}prc.dat ; IGCM_sys_Chmod u+w Bands_${RESOL_ATM_3D}_${NUM_PROC_ATM}prc.dat
            IGCM_sys_Put_Out Bands_${RESOL_ATM_3D}_${NUM_PROC_ATM}prc.dat ${R_OUT_ATM_D}/${config_UserChoices_JobName}_Bands_${RESOL_ATM_3D}_${NUM_PROC_ATM}prc.dat_0
            IGCM_debug_Print 1 "Bands file forced to ${LMDZ_Bands_file_name} and stored in ${config_UserChoices_JobName}_Bands_${RESOL_ATM_3D}_${NUM_PROC_ATM}prc.dat_0"
        fi
    fi

    LMDZ_adjust=n
    [ ${CumulPeriod} -le ${LMDZ_NbPeriod_adjust} ] && LMDZ_adjust=y

    RefPeriod=${LMDZ_NbPeriod_adjust} #0 to use a Bands file from Restart
    [ ${CumulPeriod} -le ${LMDZ_NbPeriod_adjust} ] && (( RefPeriod = ${CumulPeriod} - 1 )) 

    [ ${CumulPeriod} -gt 1 ] && ( IGCM_sys_Get ${R_OUT_ATM_D}/${config_UserChoices_JobName}_Bands_${RESOL_ATM_3D}_${NUM_PROC_ATM}prc.dat_${RefPeriod} Bands_${RESOL_ATM_3D}_${NUM_PROC_ATM}prc.dat ; IGCM_sys_Chmod u+w Bands_${RESOL_ATM_3D}_${NUM_PROC_ATM}prc.dat )

    ##-- GHG forcing for the current year
    IPCC_SOLAR=`grep Annee_${year} SOLARANDVOLCANOES_1610_2008.txt | awk -F= '{print $2}'`
#    IPCC_CO2=`grep Annee_${year} CO2_1765_2005.txt | awk -F= '{print $2}'`
    IPCC_CH4=`grep Annee_${year} CH4_1765_2005.txt | awk -F= '{print $2}'`
    IPCC_N2O=`grep Annee_${year} N2O_1765_2005.txt | awk -F= '{print $2}'`
    IPCC_CFC11=`grep Annee_${year} CFC11_1765_2005.txt | awk -F= '{print $2}'`
    IPCC_CFC12=`grep Annee_${year} CFC12_1765_2005.txt | awk -F= '{print $2}'`

    if ( ${FirstInitialize} && [ X"${config_ATM_Restart}" = X"n" ]) ; then
        ##--Initialization of fluxes to an undefined value at the first run
        UndefinedValueCo2=-9999
        InitPeriodCo2=0
        InitDateBeginCo2=${UndefinedValueCo2}
        InitYearCo2=$(( ${year} - 1 )) 
        InitDateEndCo2=${InitYearCo2}1231
        fCO2_ff=${UndefinedValueCo2} 
        CO2SBG=${UndefinedValueCo2}
        CO2LU=${UndefinedValueCo2}
        CO2MBG=${UndefinedValueCo2}
        CO2_ppm_prec=${UndefinedValueCo2}
        # Get the initial value of atmosp. pco2 
        CO2_ppm=${lmdz_UserChoices_co2_init}

        IGCM_sys_Cp ${SUBMIT_DIR}/co2.log.init ${SUBMIT_DIR}/co2.log
        IGCM_sys_Chmod u+w ${SUBMIT_DIR}/co2.log

        # Save CO2 values in ExeCpuLog variable contents 5 fields
        echo "${InitPeriodCo2} ${InitDateBeginCo2} ${InitDateEndCo2} ${CO2_ppm} ${CO2_ppm_prec} ${fCO2_ff} ${CO2MBG} ${CO2SBG} ${CO2LU}" |   \
             gawk '{printf("  %11d | %15s | %15s | %22.15g | %20.15g | %11.8g | %11.8g | %12.8g | %12.8g \n", \
                              $1,$2,$3,$4,$5,$6,$7,$8,$9)}' >> ${SUBMIT_DIR}/co2.log
    
        # Get the path where the log file co2.log is
        PathCO2log=${SUBMIT_DIR} 
        # Get Previous line in co2.log
        PreviousLinelog=$( tail -1 ${PathCO2log}/co2.log )
        
    else

        # NEW parameter in config.card (even for Overule all restarts, you must modify the line after this comment ):
        # !! NEW for Carbone cycle !! Path where to find old co2.log file for restart CO2.
        #SubmitRestartPath=
        if ( ${FirstInitialize} && [ X"${config_ATM_Restart}" = X"y" ]) ; then
            IGCM_card_DefineVariableFromOption ${SUBMIT_DIR}/config.card ATM SubmitRestartPath
            PathCO2log=${config_ATM_SubmitRestartPath}
            Date_r=$( IGCM_date_ConvertFormatToGregorian ${config_ATM_RestartDate} )
            PreviousLinelog=$( grep ${Date_r} ${PathCO2log}/co2.log )
    
            IGCM_sys_Cp ${SUBMIT_DIR}/co2.log.init ${SUBMIT_DIR}/co2.log
            IGCM_sys_Chmod u+w ${SUBMIT_DIR}/co2.log
    
            # Save Last Line of control in new co2.log file
            InitPeriodCo2=0   
            InitDateBeginCo2=$( echo "${PreviousLinelog[*]}" | gawk -F '|' '{gsub(" ",""); print $2}' )
            InitDateEndCo2=$( echo "${PreviousLinelog[*]}" | gawk -F '|' '{gsub(" ",""); print $3}' )
            fCO2_ff=$( echo "${PreviousLinelog[*]}" | gawk -F '|' '{gsub(" ",""); print $6}' )
            CO2SBG=$( echo "${PreviousLinelog[*]}" | gawk -F '|' '{gsub(" ",""); print $8}' )
            CO2LU=$( echo "${PreviousLinelog[*]}" | gawk -F '|' '{gsub(" ",""); print $9}' )
            CO2MBG=$( echo "${PreviousLinelog[*]}" | gawk -F '|' '{gsub(" ",""); print $7}' )
            CO2_ppm_prec=$( echo "${PreviousLinelog[*]}" | gawk -F '|' '{gsub(" ",""); print $5}' )
            CO2_ppm=$( echo "${PreviousLinelog[*]}" | gawk -F '|' '{gsub(" ",""); print $4}' )

            echo "${InitPeriodCo2} ${InitDateBeginCo2} ${InitDateEndCo2} ${CO2_ppm} ${CO2_ppm_prec} ${fCO2_ff} ${CO2MBG} ${CO2SBG} ${CO2LU}" |   \
                  gawk '{printf("  %11d | %15s | %15s | %22.15g | %20.15g | %11.8g | %11.8g | %12.8g | %12.8g \n", \
                              $1,$2,$3,$4,$5,$6,$7,$8,$9)}' >> ${SUBMIT_DIR}/co2.log
        else
           # Get restart line in co2.log
           PathCO2log=${SUBMIT_DIR}
           PreviousLinelog=$( tail -1 ${PathCO2log}/co2.log )
           # Get the value of atmosp. pco2 in co2.log
           CO2_ppm=$( echo "${PreviousLinelog[*]}" | gawk -F '|' '{gsub(" ",""); print $4}' )
        fi

    fi

    ##-- For historical daily cosp must be output during 1979-2005 period
    [ ${year} -ge 1979 ] && LMDZ_COSP_daily=y

    ## physiq.def parameters modified from initial physiq_L${RESOL_ATM_Z}
    LMDZ_sed physiq.def OK_instan   ${OK_instan}
    LMDZ_sed physiq.def OK_journe   ${OK_journe}
    LMDZ_sed physiq.def OK_mensuel  ${OK_mensuel}
    #LMDZ_sed physiq.def lev_histmth ${lev_histmth}
    LMDZ_sed physiq.def ok_hf       ${ok_hf}
    LMDZ_sed physiq.def ecrit_mth   ${LMDZ_ecrit_mth}
    LMDZ_sed physiq.def ecrit_ISCCP ${LMDZ_ecrit_ISCCP}
    LMDZ_sed physiq.def ok_cosp     ${LMDZ_COSP_OK}
    LMDZ_sed physiq.def ok_mensuelCOSP  ${LMDZ_COSP_monthly}
    LMDZ_sed physiq.def ok_journeCOSP   ${LMDZ_COSP_daily}
    LMDZ_sed physiq.def ok_hfCOSP   ${LMDZ_COSP_hf}
    LMDZ_sed physiq.def ok_histNMC  "${LMDZ_NMC_monthly}, ${LMDZ_NMC_daily}, ${LMDZ_NMC_hf}"
    LMDZ_sed physiq.def solaire     ${IPCC_SOLAR}
#    LMDZ_sed physiq.def co2_ppm     ${IPCC_CO2}
    LMDZ_sed physiq.def co2_ppm     ${CO2_ppm}
    LMDZ_sed physiq.def CH4_ppb     ${IPCC_CH4}
    LMDZ_sed physiq.def N2O_ppb     ${IPCC_N2O}
    LMDZ_sed physiq.def CFC11_ppt   ${IPCC_CFC11}
    LMDZ_sed physiq.def CFC12_ppt   ${IPCC_CFC12}

    ## gcm.def parameters : no change since gcm.def_${RESOL_ATM_3D} is used and already modified

    ## run.def parameters
    LMDZ_sed run.def dayref   ${InitDay}
    LMDZ_sed run.def anneeref ${InitYear}
    LMDZ_sed run.def calend   ${CalendarTypeForLmdz}
    LMDZ_sed run.def nday     ${PeriodLengthInDays}
    LMDZ_sed run.def raz_date ${RAZ_DATE}
    LMDZ_sed run.def periodav ${LMDZ_periodav}
    LMDZ_sed run.def adjust   ${LMDZ_adjust}

    ## Read ByPass_hgardfou_teta option in lmdz.card --> divide teta* by 2 if [ $ByPass_hgardfou_teta = 1 ]
    IGCM_card_DefineVariableFromOption ${SUBMIT_DIR}/COMP/lmdz.card UserChoices ByPass_hgardfou_teta
    ByPass_hgardfou_teta=${lmdz_UserChoices_ByPass_hgardfou_teta}
    if [ ${ByPass_hgardfou_teta} = y ] ; then
        awk '{ if ($0 ~ /^teta.*=/) {split($0,a,"=") ; print a[1]"="a[2]/2"."} else print $0}' gcm.def > gcm.def.tmp
        IGCM_sys_Mv gcm.def.tmp gcm.def
        echo
        IGCM_debug_Print 1 "ByPass_hgardfou_teta : ^teta*/2 in gcm.def"
        echo
        cat gcm.def
        ByPass_hgardfou_teta=n
        IGCM_card_WriteOption ${SUBMIT_DIR}/COMP/lmdz.card UserChoices ByPass_hgardfou_teta "${ByPass_hgardfou_teta}"
    fi

    ## Read ByPass_hgardfou_mats option in lmdz.card --> purmats=y 2 if [ $ByPass_hgardfou_mats = 1 ]
    IGCM_card_DefineVariableFromOption ${SUBMIT_DIR}/COMP/lmdz.card UserChoices ByPass_hgardfou_mats
    ByPass_hgardfou_mats=${lmdz_UserChoices_ByPass_hgardfou_mats}
    if [ ${ByPass_hgardfou_mats} = y ] ; then
        sed -e "s/^purmats=.*/purmats=y/" gcm.def > gcm.def.tmp
        IGCM_sys_Mv gcm.def.tmp gcm.def
        echo
        IGCM_debug_Print 1 "ByPass_hgardfou_mats : purmats=y in gcm.def"
        echo
        cat gcm.def
        ByPass_hgardfou_mats=n
        IGCM_card_WriteOption ${SUBMIT_DIR}/COMP/lmdz.card UserChoices ByPass_hgardfou_mats "${ByPass_hgardfou_mats}"
    fi

    if ( ${FirstInitialize} ) ; then

        if ( [ "${config_Restarts_OverRule}" = "n" ] && [ "${config_ATM_Restart}" = "n" ] ); then
            if [ ${DRYRUN} -le 2 ] ; then
                ##-- suppression of ozone file construction --
                cp physiq.def physiq.def.save
                LMDZ_sed physiq.def read_climoz 0
                IGCM_sys_Cp ${R_EXE}/create_etat0_limit.e ${RUN_DIR}/.
                if [ ${DRYRUN} -le 1 ] ; then
                    ${HOST_MPIRUN_COMMAND} -np 1 ./create_etat0_limit.e
                    IGCM_sys_Put_Out start.nc    ${R_OUT_ATM_R}/${config_UserChoices_JobName}_${PeriodDateBegin}_start.nc
                    IGCM_sys_Put_Out startphy.nc ${R_OUT_ATM_R}/${config_UserChoices_JobName}_${PeriodDateBegin}_startphy.nc
                fi
                IGCM_sys_Mv physiq.def.save physiq.def
            else
                echo "EXECUTION of ${HOST_MPIRUN_COMMAND} -np 1 ./create_etat0_limit.e simulated"
                echo "EXECUTION of ${HOST_MPIRUN_COMMAND} -np 1 ./create_etat0_limit.e simulated for DRYRUN = " $DRYRUN >> stack
            fi
        fi

    fi

    IGCM_debug_PopStack "ATM_Update"
}

#-----------------------------------
function ATM_Finalize
{
    IGCM_debug_PushStack "ATM_Finalize"

    [ ${CumulPeriod} -le ${LMDZ_NbPeriod_adjust} ] && IGCM_sys_Put_Out Bands_${RESOL_ATM_3D}_${NUM_PROC_ATM}prc.dat ${R_OUT_ATM_D}/${config_UserChoices_JobName}_Bands_${RESOL_ATM_3D}_${NUM_PROC_ATM}prc.dat_${CumulPeriod}

    typeset CO2SBG_3V CO2SBG CO2MBG CO2SRF CO2LU CO2_ppm CO2_ppm_prec fCO2_ff

#   get the fossile fuel file :
    fCO2_ff=$( gawk "{if (match(\$0,\"${year}\ *${month}\")) {print \$3}}" ${SUBMIT_DIR}/PARAM/CMIP5_gridcar_CO2_emissions_fossil_fuel_Andres_1751-2007_monthly_SC.txt )
    echo "Fossil Fuel for historical run  :" ${fCO2_ff}

    # Get the value of ocean carbon flux
    CO2MBG=$( ${SUBMIT_DIR}/COMP/lmdz_analyse_pisces_out.awk ocean.output )
    CO2MBG=$( echo ${CO2MBG} | sed -e "s/ *//" )
    echo "Ocean carbon flux  :" ${CO2MBG}
    
    # Get the value of land fluxes
    set +A CO2SBG_3V -- $( ${SUBMIT_DIR}/COMP/lmdz_analyse_stomate_out.awk out_orchidee_0000 )
    CO2SRF=$( echo ${CO2SBG_3V[0]} | sed -e "s/ *//" )
    CO2LU=$( echo ${CO2SBG_3V[1]} | sed -e "s/ *//" )
    CO2SBG=$( echo ${CO2SBG_3V[2]} | sed -e "s/ *//" )
    echo "Land carbon flux (NEP)         :" ${CO2SRF}
    echo "LU flux          (FLUC)        :" ${CO2LU}
    echo "Total Land carbon flux (NBP)   :" ${CO2SBG}

    # Previous CO2
    CO2_ppm_prec=$( echo "${PreviousLinelog[*]}" | gawk -F '|' '{gsub(" ",""); print $4}' )
    echo "Previous CO2  :" ${CO2_ppm_prec}

    # Formula
    CO2_ppm=$( echo "${CO2_ppm_prec} + (${fCO2_ff} + ${CO2MBG} + ${CO2SBG}) / 2.12" | bc -l )
    echo "New CO2  :" ${CO2_ppm} 

    # Save CO2 values in ExeCpuLog variable contents 5 fields
    echo "${CumulPeriod} ${PeriodDateBegin} ${PeriodDateEnd} ${CO2_ppm} ${CO2_ppm_prec} ${fCO2_ff} ${CO2MBG} ${CO2SBG} ${CO2LU}" |   \
         gawk '{printf("  %11d | %15s | %15s | %22.15g | %20.15g | %11.8g | %11.8g | %12.8g | %12.8g \n", \
                           $1,$2,$3,$4,$5,$6,$7,$8,$9)}' >> ${SUBMIT_DIR}/co2.log
    echo FINALIZE ATM !

    IGCM_debug_PopStack "ATM_Finalize"
}