source: CONFIG/UNIFORM/v5/LMDZOR_v5.2/GENERAL/DRIVER/lmdz.driver

Last change on this file was 2322, checked in by jgipsl, 10 years ago

Add error check if the year is not in forcing file for solar activity and GHG parameters.

File size: 28.4 KB
Line 
1#!/bin/ksh
2#-----------------------------------------------------------------
3function LMDZ_sed
4{
5# Usage : LMDZ_sed filedef var_name myvalue
6#         In file filedef modify the line containing var_name=xxx into var_name=myvalue
7    IGCM_debug_PushStack "LMDZ_sed"
8   
9    # Test if the fichier exist
10    if [ ! -f ${1} ] ; then
11        echo "WARNING : ${1} file does not exist. Following will not be done : LMDZ_sed : ${1} ${2} ${3}"
12        IGCM_debug_PopStack "LMDZ_sed"
13        return
14    fi
15
16    sed -e "s/^${2}\ *=.*/${2}= ${3}/" ${1} > ${1}.tmp
17    RET=$?
18    echo "LMDZ_sed : ${1} ${2} ${3}"
19    \mv ${1}.tmp ${1}
20
21    IGCM_debug_PopStack "LMDZ_sed"
22    return $RET
23}
24function LMDZ_sed_default
25{
26# Usage : LMDZ_sed_default filedef var_name
27#         In file filedef modify the line  "var_name=xxx DEFAULT= myvalue"
28#         into "var_name=myvalue"
29    IGCM_debug_PushStack "LMDZ_sed_default"
30
31    DefValue=$( grep ${2} ${1}  | awk -F"DEFAULT.=*" '{print $2}')
32
33    LMDZ_sed  ${1} ${2} $DefValue
34    IGCM_debug_PopStack "LMDZ_sed_default"
35    return $RET
36}
37
38
39function ATM_Initialize
40{
41    IGCM_debug_PushStack "ATM_Initialize"
42
43    RESOL_ATM=$( echo $RESOL | awk "-Fx" '{print $2}' | awk "-F-" '{print $1}')
44
45    [ -f ${SUBMIT_DIR}/../.resol ] && eval $(grep RESOL_ATM_3D ${SUBMIT_DIR}/../.resol) || RESOL_ATM_3D=96x95x19
46
47    RESOL_ATM_Z=$( echo ${RESOL_ATM_3D} | awk "-Fx" '{print $3}' )
48    RESOL_ATM_X=$( echo ${RESOL_ATM_3D} | awk "-Fx" '{print $1}' )
49    RESOL_ATM_Y=$( echo ${RESOL_ATM_3D} | awk "-Fx" '{print $2}' )
50    RESOL_ATM_XY="${RESOL_ATM_X}x${RESOL_ATM_Y}"
51
52    ##-- Calendar type for LMDZ and create_etat0_limit
53    case ${config_UserChoices_CalendarType} in
54        leap|gregorian)
55            CalendarTypeForLmdz=earth_366d
56            CalendarTypeForCreate=gregorian;;
57        noleap)
58            CalendarTypeForLmdz=earth_365d
59            CalendarTypeForCreate=${CalendarTypeForLmdz};;
60        360d)
61            CalendarTypeForLmdz=earth_360d
62            CalendarTypeForCreate=${CalendarTypeForLmdz};;
63        *)
64            CalendarTypeForLmdz=earth_360d
65            CalendarTypeForCreate=${CalendarTypeForLmdz}
66    esac
67
68    ##- LMDZ physics version
69    ##  Read LMDZ_Physics option in lmdz.card, if not present take default value AP (old physics)
70    if [ ! X${lmdz_UserChoices_LMDZ_Physics} = X ] ; then
71        LMDZ_Physics=${lmdz_UserChoices_LMDZ_Physics}
72    else
73        LMDZ_Physics=AP
74    fi
75    echo LMDZ physics version : ${LMDZ_Physics}
76
77    ##- Create_etat0_limit version
78    ##  Define variable CREATE only if it is set in lmdz.card section UserChoices.
79    ##  This variable is only used in lmdz.card to choose input files.
80    if [ ! X${lmdz_UserChoices_CREATE} = X ] ; then
81        IGCM_card_DefineVariableFromOption ${SUBMIT_DIR}/COMP/lmdz.card UserChoices CREATE
82        CREATE=${lmdz_UserChoices_CREATE}
83        echo create_etat0_limit version : ${CREATE}
84    fi
85
86
87    ## - LMDZ choice of config.def file
88    ##   ConfType must be set in lmdz.card
89    ConfType=${lmdz_UserChoices_ConfType}
90
91    ##- LMDZ output level, to be set in lmdz.card
92    if [ X${lmdz_UserChoices_OutLevel} = X ] ; then
93        # OutLevel is not set. Take default value low.
94        OutLevel=low
95    else
96        OutLevel=${lmdz_UserChoices_OutLevel}
97    fi
98
99    ##-- Output frequency purpose ....
100    ##--  Initialisation  ....
101    ok_mensuel=n
102    ok_journe=n
103    ok_hf=n
104    ok_hf3h=n
105    ok_hf3hm=n
106    ok_stn=n
107
108    case ${config_UserChoices_PeriodLength} in
109        1Y|1y|1M|1m) ok_mensuel=y ;;
110        5D|5d|1D|1d) ok_journe=y ;;
111    esac
112
113    for frequency in ${config_ATM_WriteFrequency} ; do
114        case ${frequency} in
115            1M|1m) ok_mensuel=y ;;
116        esac
117        case ${frequency} in
118            5D|5d|1D|1d) ok_journe=y ;;
119        esac
120        case ${frequency} in
121            HF|hf) ok_hf=y ;;
122        esac
123        case ${frequency} in
124            HF3h|hf3h) ok_hf3h=y ;;
125        esac
126        case ${frequency} in
127            HF3hm|hf3hm) ok_hf3hm=y ;;
128        esac
129        case ${frequency} in
130            STN|stn) ok_stn=y ;;
131        esac
132    done
133
134    ## Read LMDZ_NbPeriod_adjust option in lmdz.card
135    if [ X"${lmdz_UserChoices_LMDZ_NbPeriod_adjust}" = X"" ] ; then
136        # The variable is not in lmdz.card, set default value
137        LMDZ_NbPeriod_adjust=0
138    else       
139        LMDZ_NbPeriod_adjust=${lmdz_UserChoices_LMDZ_NbPeriod_adjust}
140    fi
141
142    if [ ${LMDZ_NbPeriod_adjust} -eq 0 ] ; then
143        LMDZ_Bands_file_name=${lmdz_UserChoices_LMDZ_Bands_file_name}
144    fi
145
146
147    ##  Read LMDZ_COSP_OK in lmdz.card
148    if [ ! X${lmdz_UserChoices_LMDZ_COSP_OK} = X ] ; then
149        LMDZ_COSP_OK=${lmdz_UserChoices_LMDZ_COSP_OK}
150    else
151        LMDZ_COSP_OK=n
152    fi
153    ##  Read LMDZ_COSP_monthly in lmdz.card
154    if [ ! X${lmdz_UserChoices_LMDZ_COSP_monthly} = X ] ; then
155        LMDZ_COSP_monthly=${lmdz_UserChoices_LMDZ_COSP_monthly}
156    else
157        LMDZ_COSP_monthly=n
158    fi
159    ##  Read LMDZ_COSP_daily in lmdz.card
160    if [ ! X${lmdz_UserChoices_LMDZ_COSP_daily} = X ] ; then
161        LMDZ_COSP_daily=${lmdz_UserChoices_LMDZ_COSP_daily}
162    else
163        LMDZ_COSP_daily=n
164    fi
165    ##  Read LMDZ_COSP_hf in lmdz.card
166    if [ ! X${lmdz_UserChoices_LMDZ_COSP_hf} = X ] ; then
167        LMDZ_COSP_hf=${lmdz_UserChoices_LMDZ_COSP_hf}
168    else
169        LMDZ_COSP_hf=n
170    fi
171
172    ##  Read LMDZ_NMC_monthly in lmdz.card
173    if [ ! X${lmdz_UserChoices_LMDZ_NMC_monthly} = X ] ; then
174        LMDZ_NMC_monthly=${lmdz_UserChoices_LMDZ_NMC_monthly}
175    else
176        LMDZ_NMC_monthly=n
177    fi
178
179    ## Read LMDZ_NMC_daily in lmdz.card
180    if [ ! X${lmdz_UserChoices_LMDZ_NMC_daily} = X ] ; then
181        LMDZ_NMC_daily=${lmdz_UserChoices_LMDZ_NMC_daily}
182    else
183        LMDZ_NMC_daily=n
184    fi
185   
186    ## Read LMDZ_NMC_hf in lmdz.card
187    if [ ! X${lmdz_UserChoices_LMDZ_NMC_hf} = X ] ; then
188        LMDZ_NMC_hf=${lmdz_UserChoices_LMDZ_NMC_hf}
189    else
190        LMDZ_NMC_hf=n
191    fi
192
193
194    IGCM_debug_PopStack "ATM_Initialize"
195}
196
197#-----------------------------------------------------------------
198function ATM_Update
199{
200    IGCM_debug_PushStack "ATM_Update"
201
202
203    case ${config_UserChoices_PeriodLength} in
204        *Y|*y) 
205               LMDZ_ecrit_ISCCP=30.
206               LMDZ_periodav=30.
207               if [ "${config_UserChoices_CalendarType}" != "360d" ] ; then
208                  echo Do not consider following warning if your running create_etat0_limit :
209                  echo WARNING !!! For lmdz : calendartype in config.card. PeriodLength=1Y allowed only for CalendarType=360d
210               fi
211               ;;
212        *)
213               LMDZ_ecrit_ISCCP=${PeriodLengthInDays}.
214               LMDZ_periodav=${PeriodLengthInDays}.
215               ;;
216    esac
217 
218    ##-- Remise ou non a zero de la date initiale de LMDZ pour le fichier run.def
219    if [ ${CumulPeriod} -eq 1 ] ; then
220        RAZ_DATE=1
221    else
222        RAZ_DATE=0
223    fi
224
225    ## Algorithme for special treatment for Bands_xxx file
226    ## For CumulPeriod=1 ;
227    ##        IF NbPeriod_Adjust = 0 ; set LMDZ_adjust=n
228    ##                                IF LMDZ_Bands_file_name was given in lmdz.card THEN Get Bands file directly from server. Store it later with _0 suffix.
229    ##                                IF no LMDZ_Bands_file_name was given, start without Bands file. Store it later with _0 suffix.
230    ##        ELSE set LMDZ_adjust=y ; start without Bands file ; Store it later in PARAM/ directory in submit directory with suffix _1 ;
231    ##
232    ## For CumulPeriod=2 to LMDZ_NbPeriod_adjust ;
233    ##       Get Bands file from PARAM/ in submit directory (CumulPeriod-1) ; set LMDZ_adjust=y ; Store Bands file in PARAM/ ;
234    ##
235    ## For CumulPeriod > LMDZ_NbPeriod_adjust ; LMDZ_adjust=n ; Get Bands file from PARAM/ ; Do not store ;
236
237    if [ ${CumulPeriod} -eq 1 ] ; then
238        if [ ${LMDZ_NbPeriod_adjust} -eq 0 ] ; then
239            if [ ! X${LMDZ_Bands_file_name} = X ] ; then
240                IGCM_sys_Get ${LMDZ_Bands_file_name} Bands_${RESOL_ATM_3D}_${NUM_PROC_ATM}prc.dat
241                IGCM_sys_Chmod u+w Bands_${RESOL_ATM_3D}_${NUM_PROC_ATM}prc.dat
242                IGCM_debug_Print 1 "Bands file forced to ${LMDZ_Bands_file_name} and stored in ${config_UserChoices_JobName}_Bands_${RESOL_ATM_3D}_${NUM_PROC_ATM}prc.dat_0"
243            fi
244        fi
245    fi
246
247    LMDZ_adjust=n
248    [ ${CumulPeriod} -le ${LMDZ_NbPeriod_adjust} ] && LMDZ_adjust=y
249
250    RefPeriod=${LMDZ_NbPeriod_adjust} #0 to use a Bands file from Restart
251    [ ${CumulPeriod} -le ${LMDZ_NbPeriod_adjust} ] && (( RefPeriod = ${CumulPeriod} - 1 )) 
252
253    # Get Bands file from PARAM directory if file exist
254    if ( [ ${CumulPeriod} -gt 1 ] && [ -f ${SUBMIT_DIR}/PARAM/${config_UserChoices_JobName}_Bands_${RESOL_ATM_3D}_${NUM_PROC_ATM}prc.dat_${RefPeriod} ] ) ; then
255        IGCM_sys_Cp ${SUBMIT_DIR}/PARAM/${config_UserChoices_JobName}_Bands_${RESOL_ATM_3D}_${NUM_PROC_ATM}prc.dat_${RefPeriod} Bands_${RESOL_ATM_3D}_${NUM_PROC_ATM}prc.dat
256        IGCM_sys_Chmod u+w Bands_${RESOL_ATM_3D}_${NUM_PROC_ATM}prc.dat
257    fi
258
259    ##-- GHG forcing :
260    ##   If forcing file exist in run directory, read values for the current year
261    ##   and set in config.def. If not use the default value set in config.def
262    if [ -f SOLARANDVOLCANOES.txt ] ; then
263        IPCC_SOLAR=`grep Annee_${year} SOLARANDVOLCANOES.txt | awk -F= '{print $2}'`
264        if [ X"${IPCC_SOLAR}" = X ] ; then
265            # The grep returned empty variable, stop execution
266            IGCM_debug_Exit "The file SOLARANDVOLCANOES.txt do not contain the current year."
267            IGCM_debug_Verif_Exit
268        else
269            # Set new variable in config.def file
270            LMDZ_sed config.def solaire     ${IPCC_SOLAR}
271        fi
272    else
273        LMDZ_sed_default config.def solaire
274    fi
275
276    if [ -f CO2.txt ] ; then
277        IPCC_CO2=`grep Annee_${year} CO2.txt | awk -F= '{print $2}'`
278        if [ X"${IPCC_CO2}" = X ] ; then
279            # The grep returned empty variable, stop execution
280            IGCM_debug_Exit "The file CO2.txt do not contain the current year."
281            IGCM_debug_Verif_Exit
282        else
283            # Set new variable in config.def file
284            LMDZ_sed config.def co2_ppm     ${IPCC_CO2}
285        fi
286    else
287        LMDZ_sed_default config.def co2_ppm
288    fi
289
290    if [ -f CH4.txt ] ; then
291        IPCC_CH4=`grep Annee_${year} CH4.txt | awk -F= '{print $2}'`
292        if [ X"${IPCC_CH4}" = X ] ; then
293            # The grep returned empty variable, stop execution
294            IGCM_debug_Exit "The file CH4.txt do not contain the current year."
295            IGCM_debug_Verif_Exit
296        else
297            # Set new variable in config.def file
298            LMDZ_sed config.def CH4_ppb     ${IPCC_CH4}
299        fi
300     else
301        LMDZ_sed_default config.def CH4_ppb
302    fi
303
304    if [ -f N2O.txt ] ; then
305        IPCC_N2O=`grep Annee_${year} N2O.txt | awk -F= '{print $2}'`
306        if [ X"${IPCC_N2O}" = X ] ; then
307            # The grep returned empty variable, stop execution
308            IGCM_debug_Exit "The file N2O.txt do not contain the current year."
309            IGCM_debug_Verif_Exit
310        else
311            # Set new variable in config.def file
312            LMDZ_sed config.def N2O_ppb     ${IPCC_N2O}
313        fi
314    else
315        LMDZ_sed_default config.def N2O_ppb
316    fi
317
318    if [ -f CFC11.txt ] ; then
319        IPCC_CFC11=`grep Annee_${year} CFC11.txt | awk -F= '{print $2}'`
320        if [ X"${IPCC_CFC11}" = X ] ; then
321            # The grep returned empty variable, stop execution
322            IGCM_debug_Exit "The file CFC11.txt do not contain the current year."
323            IGCM_debug_Verif_Exit
324        else
325            # Set new variable in config.def file
326            LMDZ_sed config.def CFC11_ppt   ${IPCC_CFC11}
327        fi
328    else
329        LMDZ_sed_default config.def CFC11_ppt
330    fi
331
332    if [ -f CFC12.txt ] ; then
333        IPCC_CFC12=`grep Annee_${year} CFC12.txt | awk -F= '{print $2}'`
334        if [ X"${IPCC_CFC12}" = X ] ; then
335            # The grep returned empty variable, stop execution
336            IGCM_debug_Exit "The file CFC12.txt do not contain the current year."
337            IGCM_debug_Verif_Exit
338        else
339            # Set new variable in config.def file
340            LMDZ_sed config.def CFC12_ppt   ${IPCC_CFC12}
341        fi
342    else
343        LMDZ_sed_default config.def CFC12_ppt
344    fi
345
346
347    ##-- Add special treatement for CARBON CYCLE
348    if [ X"${lmdz_UserChoices_CARBON_CYCLE}" = X"control" ] || [ X"${lmdz_UserChoices_CARBON_CYCLE}" = X"historical" ] ; then
349        ATM_Carbon_Update
350    fi
351
352
353    ##-- Set LMDZ_COSP_daily1979=y in section UserChoices in lmdz.card to activate
354    ##   COSP daily output for years 1979 and later (mandatory for historical CMIP5 run).
355    if ([ X"${lmdz_UserChoices_LMDZ_COSP_daily1979}" = X"y" ] &&  [ ${year} -ge 1979 ]) ; then
356        LMDZ_COSP_daily=y
357    fi
358
359
360    ## output.def parameters
361    #  columns in phys_output_filekeys refer to the filenames given in phys_out_filenames in output.def : 
362    #                                            histmth       histday        histhf    histfh3h   histhf3hm   histstn
363    LMDZ_sed output.def phys_out_filekeys       "${ok_mensuel} ${ok_journe}   ${ok_hf}  ${ok_hf3h} ${ok_hf3hm} ${ok_stn}"
364    LMDZ_sed output.def ecrit_ISCCP ${LMDZ_ecrit_ISCCP}
365    LMDZ_sed output.def ok_cosp     ${LMDZ_COSP_OK}
366    LMDZ_sed output.def ok_mensuelCOSP  ${LMDZ_COSP_monthly}
367    LMDZ_sed output.def ok_journeCOSP   ${LMDZ_COSP_daily}
368    LMDZ_sed output.def ok_hfCOSP   ${LMDZ_COSP_hf}
369    LMDZ_sed output.def ok_histNMC  "${LMDZ_NMC_monthly} ${LMDZ_NMC_daily} ${LMDZ_NMC_hf}"
370
371    ## gcm.def parameters :
372    # Modification for timestep in physics due to differnt type of physics
373    # To know the time step in minutes the physics part of LMDZ use: 1440/day_step*ipysiq/nsplit_phys
374    if [ X${LMDZ_Physics} = X"NPv3.1" ] && [ ${RESOL_ATM_3D} = 96x95x39 ] ; then
375        # Time step in physics: 7.5min
376        LMDZ_sed gcm.def iphysiq     5
377    elif [ X${LMDZ_Physics} = X"NPv3.1" ] && [ ${RESOL_ATM_3D} = 144x142x39 ] ; then
378        # Time step in physics: 10min
379        LMDZ_sed gcm.def iphysiq     5
380    elif [ X${LMDZ_Physics} = X"NPv3.2" ] && [ ${RESOL_ATM_3D} = 96x95x39 ] ; then
381        # Time step in physics: 15min
382        LMDZ_sed gcm.def iphysiq     5
383    elif [ X${LMDZ_Physics} = X"NPv3.2" ] && [ ${RESOL_ATM_3D} = 144x142x39 ] ; then
384        # Time step in physics: 10min
385        LMDZ_sed gcm.def iphysiq     5
386    elif [ X${LMDZ_Physics} = X"NPv3.2" ] && [ ${RESOL_ATM_3D} = 128x118x39 ] ; then
387        # Time step in physics: 7.5min
388        LMDZ_sed gcm.def iphysiq     15
389    elif [ X${LMDZ_Physics} = X"AP" ] ; then
390        # Time step in physics: 30min
391        # Use default value for old physics
392        LMDZ_sed_default gcm.def iphysiq
393    else
394        # Warning this combination has not been prepared
395        echo ""
396        echo "WARNING!! LMDZ_Physics=${LMDZ_Physics} has not been tested with resolution ${RESOL_ATM_3D}."
397        echo " => The default timestep for iphysiq will be used. "
398        echo " => You can change the default time step in gcm.def_${RESOL_ATM_3D} but be carefull to keep the syntax: iphysiq=_AUTO_ : DEFAULT = new_value"
399        echo " => Calculate new time step in minutes in the physics of LMDZ as : 1440/day_step*ipysiq/nsplit_phys"
400        LMDZ_sed_default gcm.def iphysiq
401        echo ""
402    fi
403   
404
405
406    ## run.def parameters
407    LMDZ_sed run.def dayref   ${InitDay}
408    LMDZ_sed run.def nday     ${PeriodLengthInDays}
409    LMDZ_sed run.def raz_date ${RAZ_DATE}
410    LMDZ_sed run.def periodav ${LMDZ_periodav}
411    LMDZ_sed run.def adjust   ${LMDZ_adjust}
412
413    # Set anneeref different for gcm and ce0l
414    # Variable calend is different for a run with create_etat0_limit and the gcm
415    # Test if executable create_etat0_limit is present and lmdz.x is not present
416    if [ -f create_etat0_limit* ] || [ -f ce0l* ] && [ ! -f lmdz.x ] ; then
417        # for case ce0l : always take current year
418        LMDZ_sed run.def anneeref ${year}
419        LMDZ_sed run.def calend   ${CalendarTypeForCreate}
420    else
421        # for case gcm : take first year of simulation
422        LMDZ_sed run.def anneeref ${InitYear}
423        LMDZ_sed run.def calend   ${CalendarTypeForLmdz}
424    fi
425
426    # Activate creation of file grilles_gcm.nc only at first period
427    if [ ${CumulPeriod} -eq 1 ] ; then
428        LMDZ_sed run.def grilles_gcm_netcdf y
429    else
430        LMDZ_sed run.def grilles_gcm_netcdf n
431    fi
432
433    ## Determine from the variable ListOfComponents in config.card coupling to external models
434    ## and set corresponding parameters in run.def
435    echo ListOfComponents now running : ${config_ListOfComponents[*]}
436
437    if [ X${config_ListOfComponents_SRF} = Xorchidee ] ; then
438        echo "Activate ORCHIDEE: set VEGET=y and add INCLUDEDEF=orchidee.def in run.def"
439        LMDZ_sed run.def VEGET y
440        # Add "INCLUDEDEF=orchidee.def" before the 5th line in run.def
441        sed -i '5iINCLUDEDEF=orchidee.def' run.def
442    else
443        echo "No ORCHIDEE, set VEGET=n in run.def"
444        LMDZ_sed run.def VEGET n
445    fi
446
447    if [ X${config_ListOfComponents_CPL} = Xoasis ] ; then
448        echo "Activate coupling to ocean, set type_ocean=couple in run.def"
449        LMDZ_sed run.def type_ocean couple
450    else
451        echo "LMDZ is running in forced mode without ocean model, set type_ocean=force in run.def"
452        LMDZ_sed run.def type_ocean force
453    fi
454
455    if [ X${config_ListOfComponents_CHM} = Xinca ] ; then
456        echo "Activate coupling to INCA: set type_trac=inca and add INCLUDEDEF=inca.def in run.def"
457        LMDZ_sed run.def type_trac inca
458        # Add "INCLUDEDEF=inca.def" before the 5th line in run.def
459        sed -i '5iINCLUDEDEF=inca.def' run.def
460    elif [ X${config_ListOfComponents_CHM} = Xreprobus ] ; then
461        echo "Activate coupling to REPROBUS: set type_trac=repr and add INCLUDEDEF=reprobus.def in run.def"
462        LMDZ_sed run.def type_trac repr
463        LMDZ_sed run.def config_inca none
464        # Add "INCLUDEDEF=reprobus.def" before the 5th line in run.def
465        sed -i '5iINCLUDEDEF=reprobus.def' run.def
466    else
467        echo "No coupling to chemistry model, set type_trac=lmdz in run.def"
468        LMDZ_sed run.def type_trac lmdz
469        LMDZ_sed run.def config_inca none
470    fi
471
472
473    # config.def : Activate direct radiative effect if ok_ade=y
474    if [ ! X${lmdz_UserChoices_ok_ade} = X ]; then
475        LMDZ_sed config.def ok_ade ${lmdz_UserChoices_ok_ade}
476    else
477        LMDZ_sed config.def ok_ade n
478    fi 
479
480    # config.def : Activate indirect radiative effect if ok_aie=y
481    if [ ! X${lmdz_UserChoices_ok_aie} = X ]; then
482        LMDZ_sed config.def ok_aie ${lmdz_UserChoices_ok_aie}
483    else
484        LMDZ_sed config.def ok_aie n
485    fi 
486
487    # config.def : Activate online aerosol coupled model if aerosol_couple=y
488    if [ ! X${lmdz_UserChoices_aerosol_couple} = X ]; then
489        LMDZ_sed config.def aerosol_couple ${lmdz_UserChoices_aerosol_couple}
490    else
491        LMDZ_sed config.def aerosol_couple n
492    fi 
493
494    # config.def : Activate reading of ozone in climatology if read_climoz=2
495    if [ ! X${lmdz_UserChoices_read_climoz} = X ]; then
496        LMDZ_sed config.def read_climoz ${lmdz_UserChoices_read_climoz}
497    else
498        LMDZ_sed config.def read_climoz 0       
499    fi 
500
501    # config.def : Choose aerosol use in radiative effect
502    #  type of coupled aerosol =1 (default) =2 => bc  only =3 => pom only =4 => seasalt only
503    # =5 => dust only =6 => all aerosol   
504    if [ ! X${lmdz_UserChoices_flag_aerosol} = X ]; then
505        LMDZ_sed config.def flag_aerosol ${lmdz_UserChoices_flag_aerosol}
506    else
507        LMDZ_sed config.def flag_aerosol 0
508    fi 
509
510    # config.def : Activate calcul of Cloud droplet number concentration if ok_cdnc=y
511    if [ ! X${lmdz_UserChoices_ok_cdnc} = X ]; then
512        LMDZ_sed config.def ok_cdnc ${lmdz_UserChoices_ok_cdnc}
513    else
514        LMDZ_sed config.def ok_cdnc n   
515    fi 
516
517    # guide.def : Activate nudging if ok_guide=y set in lmdz.card
518    if [ X${lmdz_UserChoices_ok_guide} = Xy ] ; then
519        # Set ok_guide=y in guide.def
520        LMDZ_sed guide.def ok_guide  ${lmdz_UserChoices_ok_guide}
521        # Add "INCLUDEDEF=guide.def" before the 5th line in run.def
522        sed -i '5iINCLUDEDEF=guide.def' run.def
523    else
524        LMDZ_sed guide.def ok_guide n
525    fi
526
527    ## Read ByPass_hgardfou_teta option in lmdz.card --> divide teta* by 2 if [ $ByPass_hgardfou_teta = 1 ]
528    ByPass_hgardfou_teta=${lmdz_UserChoices_ByPass_hgardfou_teta}
529    if [ X"${ByPass_hgardfou_teta}" = X"y" ] ; then
530        awk '{ if ($0 ~ /^teta.*=/) {split($0,a,"=") ; print a[1]"="a[2]/2"."} else print $0}' gcm.def > gcm.def.tmp
531        IGCM_sys_Mv gcm.def.tmp gcm.def
532        echo
533        IGCM_debug_Print 1 "ByPass_hgardfou_teta : ^teta*/2 in gcm.def"
534        echo
535        cat gcm.def
536        ByPass_hgardfou_teta=n
537        IGCM_card_WriteOption ${SUBMIT_DIR}/COMP/lmdz.card UserChoices ByPass_hgardfou_teta "${ByPass_hgardfou_teta}"
538    fi
539
540    ## Read ByPass_hgardfou_mats option in lmdz.card --> purmats=y 2 if [ $ByPass_hgardfou_mats = 1 ]
541    ByPass_hgardfou_mats=${lmdz_UserChoices_ByPass_hgardfou_mats}
542    if [ X"${ByPass_hgardfou_mats}" = X"y" ] ; then
543        sed -e "s/^purmats=.*/purmats=y/" gcm.def > gcm.def.tmp
544        IGCM_sys_Mv gcm.def.tmp gcm.def
545        echo
546        IGCM_debug_Print 1 "ByPass_hgardfou_mats : purmats=y in gcm.def"
547        echo
548        cat gcm.def
549        ByPass_hgardfou_mats=n
550        IGCM_card_WriteOption ${SUBMIT_DIR}/COMP/lmdz.card UserChoices ByPass_hgardfou_mats "${ByPass_hgardfou_mats}"
551    fi
552
553    if ( ${FirstInitialize} ) ; then
554        if [ -f start.nc ] && [ -f startphy.nc ] ; then
555            # The restart files already exist. They have been copied from a previous run or from a CREATE job
556            echo "Restart files for LMDZ have been copied from a previous run"
557        elif [ -f create_etat0_limit* ] || [ -f ce0l* ] && [ ! -f lmdz.x ] ; then
558            # Do nothing because it is the program for creating restart files that is running and not LMDZ
559            echo "create_etat0_limit.e will create initial start files"
560        else
561            # Restart files have to be created
562            # Old option. Now removed.
563            echo "REMOVED OPTION: Run create_etat0_limit.e to create restart files start.nc and startphy.nc for LMDZ"
564            echo "You must now create start.nc and startphy.nc before launching the model or use restart files"
565            IGCM_debug_Exit "ATM_Update: start.nc and startphy.nc files are missing!"
566            IGCM_debug_Verif_Exit
567        fi
568    fi
569
570    IGCM_debug_PopStack "ATM_Update"
571}
572
573#-----------------------------------
574function ATM_Finalize
575{
576    IGCM_debug_PushStack "ATM_Finalize"
577
578    # If the file exist, copy Bands_ file to PARAM/ in submit directory. This file will be used for the simulation.
579    # Copy also the same file into ATM/Restart at ARCHIVE directory for backup.
580    if [ -f Bands_${RESOL_ATM_3D}_${NUM_PROC_ATM}prc.dat ] ; then
581      if [ ${CumulPeriod} -le ${LMDZ_NbPeriod_adjust} ] ; then
582        IGCM_sys_Cp Bands_${RESOL_ATM_3D}_${NUM_PROC_ATM}prc.dat ${SUBMIT_DIR}/PARAM/${config_UserChoices_JobName}_Bands_${RESOL_ATM_3D}_${NUM_PROC_ATM}prc.dat_${CumulPeriod}
583        IGCM_sys_Put_Out Bands_${RESOL_ATM_3D}_${NUM_PROC_ATM}prc.dat ${R_OUT_ATM_R}/${config_UserChoices_JobName}_Bands_${RESOL_ATM_3D}_${NUM_PROC_ATM}prc.dat_${CumulPeriod}
584      elif [ ${CumulPeriod} -eq 1 ] && [ ${LMDZ_NbPeriod_adjust} -eq 0 ] ; then
585        # Special case : first period and no adjust => Save bands file with suffix _0
586        IGCM_sys_Cp Bands_${RESOL_ATM_3D}_${NUM_PROC_ATM}prc.dat ${SUBMIT_DIR}/PARAM/${config_UserChoices_JobName}_Bands_${RESOL_ATM_3D}_${NUM_PROC_ATM}prc.dat_0
587        IGCM_sys_Put_Out Bands_${RESOL_ATM_3D}_${NUM_PROC_ATM}prc.dat ${R_OUT_ATM_R}/${config_UserChoices_JobName}_Bands_${RESOL_ATM_3D}_${NUM_PROC_ATM}prc.dat_0
588      fi
589    fi
590
591    # Add special treatement for CARBON CYCLE
592    if [ X"${lmdz_UserChoices_CARBON_CYCLE}" = X"control" ] || [ X"${lmdz_UserChoices_CARBON_CYCLE}" = X"historical" ] ; then
593        ATM_Carbon_Finalize
594    fi
595
596    echo FINALIZE ATM !
597
598    IGCM_debug_PopStack "ATM_Finalize"
599}
600
601
602
603function ATM_Carbon_Update
604{
605    # This fuction will be called only if CARBON_CYCLE is set to control or historical in lmdz.card
606
607    IGCM_debug_PushStack "ATM_Carbon_Update"
608
609    typeset InitPeriodCo2 InitDateBeginCo2 InitDateEndCo2
610    typeset CO2SBG CO2MBG CO2LU CO2_ppm CO2_ppm_prec fCO2_ff
611    typeset PathCO2log
612    typeset PreviousLinelog LastPeriodDateBegin LastPeriodDateEnd LastDatesPeriod LastPREFIX
613   
614    if ( ${FirstInitialize} && [ X"${config_ATM_Restart}" = X"n" ] ) ; then
615        ##--Initialization of fluxes to an undefined value at the first run
616        UndefinedValueCo2=-9999
617        InitPeriodCo2=0
618        InitDateBeginCo2=${UndefinedValueCo2}
619        InitYearCo2=$(( ${year} - 1 )) 
620        InitDateEndCo2=${InitYearCo2}1231
621        fCO2_ff=${UndefinedValueCo2} 
622        CO2SBG=${UndefinedValueCo2}
623        CO2LU=${UndefinedValueCo2}
624        CO2MBG=${UndefinedValueCo2}
625        CO2_ppm_prec=${UndefinedValueCo2}
626        # Get the initial value of atmosp. pco2
627        CO2_ppm=${lmdz_UserChoices_co2_init}
628       
629        IGCM_sys_Cp ${SUBMIT_DIR}/co2.log.init ${SUBMIT_DIR}/co2.log
630        IGCM_sys_Chmod u+w ${SUBMIT_DIR}/co2.log
631       
632        # Save CO2 values in ExeCpuLog variable contents 5 fields
633        echo "${InitPeriodCo2} ${InitDateBeginCo2} ${InitDateEndCo2} ${CO2_ppm} ${CO2_ppm_prec} ${fCO2_ff} ${CO2MBG} ${CO2SBG} ${CO2LU}" |   \
634            gawk '{printf("  %11d | %15s | %15s | %22.15g | %20.15g | %11.8g | %11.8g | %12.8g | %12.8g \n", \
635                              $1,$2,$3,$4,$5,$6,$7,$8,$9)}' >> ${SUBMIT_DIR}/co2.log
636       
637        # Get the path where the log file co2.log is
638        PathCO2log=${SUBMIT_DIR} 
639        # Get Previous line in co2.log
640        PreviousLinelog=$( tail -1 ${PathCO2log}/co2.log )
641       
642    else
643       
644        # NEW parameter in config.card (even for Overule all restarts, you must modify the line after this comment ):
645        # !! NEW for Carbone cycle !! Path where to find old co2.log file for restart CO2.
646        #SubmitRestartPath=
647        if ( ${FirstInitialize} && [ X"${config_ATM_Restart}" = X"y" ] ) ; then
648            IGCM_card_DefineVariableFromOption ${SUBMIT_DIR}/config.card ATM SubmitRestartPath
649            PathCO2log=${config_ATM_SubmitRestartPath}
650            Date_r=$( IGCM_date_ConvertFormatToGregorian ${config_ATM_RestartDate} )
651            PreviousLinelog=$( grep ${Date_r} ${PathCO2log}/co2.log )
652           
653            IGCM_sys_Cp ${SUBMIT_DIR}/co2.log.init ${SUBMIT_DIR}/co2.log
654            IGCM_sys_Chmod u+w ${SUBMIT_DIR}/co2.log
655           
656            # Save Last Line of control in new co2.log file
657            InitPeriodCo2=0   
658            InitDateBeginCo2=$( echo "${PreviousLinelog[*]}" | gawk -F '|' '{gsub(" ",""); print $2}' )
659            InitDateEndCo2=$( echo "${PreviousLinelog[*]}" | gawk -F '|' '{gsub(" ",""); print $3}' )
660            fCO2_ff=$( echo "${PreviousLinelog[*]}" | gawk -F '|' '{gsub(" ",""); print $6}' )
661            CO2SBG=$( echo "${PreviousLinelog[*]}" | gawk -F '|' '{gsub(" ",""); print $8}' )
662            CO2LU=$( echo "${PreviousLinelog[*]}" | gawk -F '|' '{gsub(" ",""); print $9}' )
663            CO2MBG=$( echo "${PreviousLinelog[*]}" | gawk -F '|' '{gsub(" ",""); print $7}' )
664            CO2_ppm_prec=$( echo "${PreviousLinelog[*]}" | gawk -F '|' '{gsub(" ",""); print $5}' )
665            CO2_ppm=$( echo "${PreviousLinelog[*]}" | gawk -F '|' '{gsub(" ",""); print $4}' )
666           
667            echo "${InitPeriodCo2} ${InitDateBeginCo2} ${InitDateEndCo2} ${CO2_ppm} ${CO2_ppm_prec} ${fCO2_ff} ${CO2MBG} ${CO2SBG} ${CO2LU}" |   \
668                gawk '{printf("  %11d | %15s | %15s | %22.15g | %20.15g | %11.8g | %11.8g | %12.8g | %12.8g \n", \
669                              $1,$2,$3,$4,$5,$6,$7,$8,$9)}' >> ${SUBMIT_DIR}/co2.log
670        else
671           # Get restart line in co2.log
672            PathCO2log=${SUBMIT_DIR}
673            PreviousLinelog=$( tail -1 ${PathCO2log}/co2.log )
674           # Get the value of atmosp. pco2 in co2.log
675            CO2_ppm=$( echo "${PreviousLinelog[*]}" | gawk -F '|' '{gsub(" ",""); print $4}' )
676        fi
677       
678    fi
679   
680    if [ ${lmdz_UserChoices_CARBON_CYCLE} = historical ] ; then
681            # Modify co2_ppm in config.def only for historical run
682            # If not historical run, keep co2_ppm value set earlier by LMDZ_sed
683        LMDZ_sed config.def co2_ppm     ${CO2_ppm}
684    fi
685    IGCM_debug_PopStack "ATM_Carbon_Update"
686}
687
688
689function ATM_Carbon_Finalize
690{
691    # This fuction will be called only if CARBON_CYCLE is set to control or historical in lmdz.card
692
693    IGCM_debug_PushStack "ATM_Carbon_Finalize"
694
695    typeset CO2SBG_3V CO2SBG CO2MBG CO2SRF CO2LU CO2_ppm CO2_ppm_prec fCO2_ff
696   
697        # Fossil fuel emission
698    if [ ${lmdz_UserChoices_CARBON_CYCLE} = control ] ; then
699            # For Control, no fossil fuel emission :
700        fCO2_ff=0
701        echo "Fossil Fuel for control run  :" ${fCO2_ff}
702    else
703            # For historical, get the fossile fuel file :
704        fCO2_ff=$( gawk "{if (match(\$0,\"${year}\ *${month}\")) {print \$3}}" ${SUBMIT_DIR}/PARAM/CMIP5_gridcar_CO2_emissions_fossil_fuel_Andres_1751-2007_monthly_SC.txt )
705        echo "Fossil Fuel for historical run  :" ${fCO2_ff}
706    fi
707   
708        # Get the value of ocean carbon flux
709    CO2MBG=$( ${SUBMIT_DIR}/COMP/lmdz_analyse_pisces_out.awk ocean.output )
710    CO2MBG=$( echo ${CO2MBG} | sed -e "s/ *//" )
711    echo "Ocean carbon flux  :" ${CO2MBG}
712   
713        # Get the value of land fluxes
714    set +A CO2SBG_3V -- $( ${SUBMIT_DIR}/COMP/lmdz_analyse_stomate_out.awk out_orchidee_0000 )
715    CO2SRF=$( echo ${CO2SBG_3V[0]} | sed -e "s/ *//" )
716    CO2LU=$( echo ${CO2SBG_3V[1]} | sed -e "s/ *//" )
717    CO2SBG=$( echo ${CO2SBG_3V[2]} | sed -e "s/ *//" )
718    echo "Land carbon flux (NEP)         :" ${CO2SRF}
719    echo "LU flux          (FLUC)        :" ${CO2LU}
720    echo "Total Land carbon flux (NBP)   :" ${CO2SBG}
721   
722        # Previous CO2
723    CO2_ppm_prec=$( echo "${PreviousLinelog[*]}" | gawk -F '|' '{gsub(" ",""); print $4}' )
724    echo "Previous CO2  :" ${CO2_ppm_prec}
725   
726        # Formula
727    CO2_ppm=$( echo "${CO2_ppm_prec} + (${fCO2_ff} + ${CO2MBG} + ${CO2SBG}) / 2.12" | bc -l )
728    echo "New CO2  :" ${CO2_ppm}
729   
730        # Save CO2 values in ExeCpuLog variable contents 5 fields
731    echo "${CumulPeriod} ${PeriodDateBegin} ${PeriodDateEnd} ${CO2_ppm} ${CO2_ppm_prec} ${fCO2_ff} ${CO2MBG} ${CO2SBG} ${CO2LU}" |   \
732        gawk '{printf("  %11d | %15s | %15s | %22.15g | %20.15g | %11.8g | %11.8g | %12.8g | %12.8g \n", \
733                           $1,$2,$3,$4,$5,$6,$7,$8,$9)}' >> ${SUBMIT_DIR}/co2.log
734   
735    IGCM_debug_PopStack "ATM_Carbon_Finalize"
736}
Note: See TracBrowser for help on using the repository browser.