source: CONFIG/UNIFORM/v6/IPSLCM6.3/EXPERIMENTS/IPSLESM/GES/piControl_GES_CoupOceAtm_TEST/COMP/inca.card @ 6696

Last change on this file since 6696 was 6696, checked in by acosce, 6 months ago

update files to activate n2o coupling from pisces to inca
use new sflx files for natural emissions
use sstoc.nc files with n2o and dms initialisation

File size: 4.4 KB
Line 
1#- $Id: inca.card 70 2007-06-21 14:20:42Z acosce $
2[Compatibility]
3libIGCM=1.0
4
5[UserChoices]
6#choose if input file will be regrid by xios, or read without regrid with netcdf
7xios_read=n
8# Set LMDZ_10m_winds to choose if the simulation will use online 10m wind (=y) or offline (=n)
9LMDZ_10m_winds=y
10#active or not chemistry flux in output
11calcul_flux=n
12#choose which type of aircraft you will use (0 - 1 - 2 - 3) (no aircraft / old inca aircraft / new subsonic inca aircraft / subsonic + hypersonic inca aircraft)
13flag_plane=1
14#choose which time interpolation you want to interpolate sflx file. ( 0 - 1) (no interpolation / point to point interpolation)
15#be careful name of sflx file change with the choice of emi_interp_time ( no file / sflx_p2p.nc)
16emi_interp_time=1
17
18
19#coupled model with Orchidee and Pisces
20#if yes, you need to put to CHEMISTRY_BVOC=y in orchidee.def and decomment lines for fertilizer and bbg in orchidee.card
21CoupOrchInca=y
22CoupOceAtm=y
23#choice of species transfer from ocean to atmosphere (via lmdz)
24transm_dms_oa=n
25transm_n2o_oa=y
26
27#choose which type of sflx_nat.nc file we are using
28multi_sources_nat=y
29
30
31# Specify output frequency for output files
32# you can choose the frequency 1d (daily), 1mo (monthly), other (1ts, 5d, etc.) or NONE if to deactivate it
33# if you choose 1d the file will be store in CHM/Output/DA
34# if you choose 1mo the file will be store in CHM/Output/MO
35# if you choose another frequency, the file will be store in CHM/Output/DA by default
36output_frequency_ges=1d
37output_frequency_veget=1d
38
39[InitialStateFiles]
40List= ()
41
42       
43[BoundaryFiles]
44List=(${R_IN}/CHM/IPCC_AR6/SFLX/VERS4/${RESOL_CHM}/phy/Historical/ANT/sflx_lmdz_ANT_${year}_phy.nc,   sflx_ANT.nc         ),\
45     (${R_IN}/CHM/IPCC_AR6/SFLX/VERS4/${RESOL_CHM}/phy/Historical/BBG/sflx_lmdz_BBG_${year}_phy.nc,   sflx_BBG.nc         ),\
46     (${R_IN}/CHM/IPCC_AR6/SFLX/VERS4/${RESOL_CHM}/phy/Historical/NAT/sflx_lmdz_NAT_${year}_phy.nc,   sflx_NAT.nc     )\
47     (${R_IN}/CHM/IPCC_AR6/AIRCRAFT/${RESOL_CHM}/aircraft_${year}_phy.nc           ,   aircraft_mth.nc     ),\
48     (${R_IN}/CHM/IPCC_AR6/OXYDANTS/${RESOL_CHM}_yearly_interpolated/oxydants_${year}.nc,   oxydants.nc         )
49
50
51ListNonDel= (${R_IN}/CHM/INCA144142-L39/npp.nc                      ,   npp.nc          )\
52            (${R_IN}/CHM/IPCC_AR6/SFLX/VERS4/${RESOL_CHM}/phy/sflx_lmdz_GHG_phy.nc  ,   sflx_GHG.nc     )\
53            (${R_IN}/CHM/IPCC_AR6/SFLX/VERS4/${RESOL_CHM}/phy/sflx_lmdz_MISC_phy.nc ,   sflx_MISC.nc    )\
54            (${R_IN}/CHM/IPCC_AR6/lglived_CMIP6.dat                         ,   lglived.dat     ),\
55            (${R_IN}/CHM/INCA${RESOL_CHM}/landuse.nc                        ,   landuse.nc      )\
56            (${R_IN}/CHM/INCA${RESOL_CHM}/andres.nc                         ,   andres.nc       )\
57            (${R_IN}/CHM/INCA${RESOL_CHM}/casa_m.nc                         ,   casa_m.nc       )\
58            (${R_IN}/CHM/INCA${RESOL_CHM}/taka.nc                           ,   taka.nc         )\
59            (${R_IN}/CHM/INCA${RESOL_CHM}/casa_h.nc                         ,   casa_h.nc       )\
60            (${R_IN}/CHM/INCA${RESOL_CHM}/new_phototable.dat                ,   phototable.dat  )
61
62
63
64[ParametersFiles]
65List=   (${SUBMIT_DIR}/PARAM/inca.def_N2O, inca.def),\
66        (${MODIPSL}/modeles/INCA/src/INCA_XML/context_inca.xml, .)   ,\
67        (${MODIPSL}/modeles/INCA/src/INCA_XML/field_def_inca.xml, .) ,\
68        (${MODIPSL}/modeles/INCA/src/INCA_XML/file_def_inca_restart.xml, file_def_inca_restart.xml ), \
69        (${MODIPSL}/modeles/INCA/src/INCA_XML/file_def_inca_GES.xml, file_def_inca.xml ), \
70        (${MODIPSL}/bin/inca_${ConfChem}.dat, inca.dat)
71
72       
73
74[RestartFiles]
75# List restart that have to be saved/restored each loop (file out, saved, and in) :
76List= (chem_restart.nc, chem_restart.nc, chem_start.nc)
77
78
79
80[OutputText]
81List=(inca.out, inca.def,context_inca.xml,field_def_inca.xml,file_def_inca.xml, inca_IDxml.out)
82
83[OutputFiles]
84List=   (inca1d_ges.nc          ,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_ges.nc        , Post_1D_inca_ges  ),\
85        (inca1d_veget.nc        ,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_veget.nc      , NONE              ),\
86        (inca1mo_ges.nc         ,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_ges.nc        , NONE              ),\
87        (inca1mo_veget.nc       ,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_veget.nc      , NONE              ),\
88        (mmr_ce0l_ico.nc        ,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_mmr_ce0l_ico.nc    , NONE              )
89
90
91
92
93[Post_1D_inca_ges]
94Patches= ()
95GatherWithInternal = (lon, lat, presnivs, , time_centered, time_centered_bounds, time_counter, area)
96TimeSeriesVars2D = ()
97ChunckJob2D = NONE
98TimeSeriesVars3D = (vmrch4,vmrco,vmrco2oc,vmrco2bim,vmrco2bih,jn2o,jmcf)
99ChunckJob3D = NONE
100Seasonal=OFF
Note: See TracBrowser for help on using the repository browser.