source: CONFIG/UNIFORM/v6/IPSLCM6.3/EXPERIMENTS/IPSLESM/NMHC_AER_S/piControl_NAS_CoupOceAtm_TEST/COMP/lmdz.card @ 6697

Last change on this file since 6697 was 6697, checked in by acosce, 6 months ago

Add experiment to use configuration NMHC_AER_S in coupled model with coupling from pisces to inca for Dms and n2O
File size: 6.7 KB
Line 
1#- $Id: lmdz.card 70 2007-06-21 14:20:42Z acosce $
2[Compatibility]
3libIGCM=1.0
4
5[UserChoices]
6# Physics package to use :
7LMDZ_Physics=NPv6.2
8
9# Activate the call to phytrac to run tracer simulation
10iflag_phytrac=1
11
12# Use XIOS as output library
13XIOS=y
14
15# Set the variable CREATE needed further below to find the initial and boundary condition files.
16CREATE=ELC-${RESOL_ATM_3D}
17
18# ByPass_hgardfou_teta=y : modify teta_ parameters for following CumulPeriod only
19ByPass_hgardfou_teta=n
20
21# ByPass_hgardfou_mats=y : set parameter purmats=y for following CumulPeriod only
22ByPass_hgardfou_mats=n
23
24# Set ConfType to choose parameters for aerosols, solar and green house gazes.
25# The parameter file PARAM/config.def_$ConfType will be used.
26# ConfType=preind/actuel/annuel
27ConfType=preind
28
29# manage radiative aerosol effect and ozone
30flag_aerosol=6
31ok_ade=y
32ok_aie=y
33aerosol_couple=y
34chemistry_couple=y
35read_climoz=0
36ok_cdnc=y
37
38
39# Nugding : ok_guide=y/n
40# If ok_guide=y, add nudging files(u.nc, v.nc, hur.nc,...) in BoundaryFiles section below.
41ok_guide=n
42
43# Specify which output file to activate and at which output_level
44# Use an integer to specify the output level or NONE if to deactivate the file
45# output_level_filename=1     : activate the corresponding file with low output level
46# output_level_filename=10    : activate the corresponding file with high output level
47# output_level_filename=NONE  : the file will not be written
48output_level_histmth = 5
49output_level_histday = NONE
50output_level_histhf  = NONE
51output_level_histmthNMC = NONE
52output_level_histdayNMC = NONE
53output_level_histhfNMC  = NONE
54output_level_histstrataer = NONE
55output_level_histdaystrataer = NONE
56output_level_histstn      = NONE
57
58# Activate COSP in config.def and set corresponding output files
59LMDZ_COSP_OK=n
60output_level_histmthCOSP = NONE
61output_level_histdayCOSP = NONE
62output_level_histhfCOSP  = NONE
63
64[InitialStateFiles]
65List=   (${R_IN}/CHM/INCA${RESOL_CHM}/start_NAS_H2O.nc  , start.nc      ) \
66        (${R_IN}/CHM/INCA${RESOL_CHM}/startphy_o2a_noTer.nc     , startphy.nc   )
67
68
69[BoundaryFiles]
70List=   ()
71#
72# With CMIP6 aerosols version 1
73# With 3D ozone
74ListNonDel= (${R_IN}/ATM/OZONE/UReading/historical.v20160711.v2/interpol/${RESOL_ATM_XY}/climoz_LMDZ_1850_1850_clim.nc, climoz_LMDZ.nc),\
75            (${R_IN}/ATM/SOLAR/CMIP6/v3.1corr/Control/solarforcing_v3.1_piControl_ave_6bands_366days.nc, solarforcing.nc),\
76            (${R_IN}/ATM/STRATAERO/CMIP6/v3/${RESOL_ATM_XY}/L${RESOL_ATM_Z}/taulwstrat.2D.ave.nc, taulwstrat.2D.nc),\
77            (${R_IN}/ATM/STRATAERO/CMIP6/v3/${RESOL_ATM_XY}/L${RESOL_ATM_Z}/tauswstrat.2D.ave.nc, tauswstrat.2D.nc),\
78            (${R_IN}/ATM/GHG/CO2_EMISSION/v1/144x142/flux_1D_CO2_2014.nc, sflx_lmdz_co2_ff.nc),\           
79            (${R_IN}/ATM/SITES/cfsites_grid_CMIP6.nc, cfsites_grid.nc)
80
81
82
83[ParametersFiles]
84List=   (${SUBMIT_DIR}/PARAM/physiq.def_${LMDZ_Physics}, physiq.def),       \
85        (${SUBMIT_DIR}/PARAM/gcm.def_${RESOL_ATM_XY}_${LMDZ_Physics},    gcm.def),          \
86        (${SUBMIT_DIR}/PARAM/vert.def_L${RESOL_ATM_Z},   vert.def),         \
87        (${MODIPSL}/modeles/LMDZ/DefLists/cosp_input_nl.txt, .),            \
88        (${MODIPSL}/modeles/LMDZ/DefLists/cosp_output_nl.txt, .),           \
89        (${SUBMIT_DIR}/PARAM/config.def_${ConfType},  config.def),          \
90        (${SUBMIT_DIR}/PARAM/guide.def, .),                                 \
91        (${SUBMIT_DIR}/PARAM/run.def, .),                                   \
92        (${SUBMIT_DIR}/PARAM/iodef.xml, . ),                                \
93        (${MODIPSL}/bin/tracer_${ConfChem}.def, tracer.def),                \
94        (${MODIPSL}/modeles/LMDZ/DefLists/context_lmdz.xml, . ),            \
95        (${MODIPSL}/modeles/LMDZ/DefLists/field_def_lmdz.xml, . ),          \
96        (${MODIPSL}/modeles/LMDZ/DefLists/field_def_cosp1.xml, . ),         \
97        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histmth_lmdz.xml, . ),   \
98        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histmthCOSP_lmdz.xml, .),\
99        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histmthNMC_lmdz.xml, . ),\
100        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histday_lmdz.xml, . ),   \
101        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histdayCOSP_lmdz.xml, .),\
102        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histdayNMC_lmdz.xml, . ),\
103        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histhf_lmdz.xml, . ),    \
104        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histhfCOSP_lmdz.xml, .), \
105        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histhfNMC_lmdz.xml, . ), \
106        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histstn_lmdz.xml, . ),   \
107        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histstrataer_lmdz.xml, . ),\
108        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histdaystrataer_lmdz.xml, . ),\
109        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histins_lmdz.xml, . ),   \
110        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histLES_lmdz.xml, . )
111
112[RestartFiles]
113List=   (restart.nc, restart.nc, start.nc), \
114        (restartphy.nc, restartphy.nc,  startphy.nc)
115
116[OutputText]
117List=   (physiq.def, gcm.def, vert.def, run.def, traceur.def, guide.def, config.def, used_run.def, iodef.xml, context_lmdz.xml, field_def_lmdz.xml, file_def_*lmdz.xml, debug.01, lmdz.prt, out_lmdz.x.err, out_lmdz.x.out)
118
119[OutputFiles]
120List=   (histmth.nc,      ${R_OUT_ATM_O_M}/${PREFIX}_1M_histmth.nc,   Post_1M_histmth   )       
121
122[Post_1M_histmth]
123Patches= ()
124GatherWithInternal = (lon, lat, presnivs, time_counter, time_centered, time_centered_bounds, aire)
125TimeSeriesVars2D = (bils, cldh, cldl, cldm, cldq, cldt, evap, flat, ftime_con, iwp, lwp, LWdnSFC, LWdnSFCclr, LWupSFCclr, LWdn200, LWdn200clr, LWup200, LWup200clr, precip, prw, pluc, psol, q2m, rh2m, sens, sicf, slp, snow, soll0, soll, sols0, sols, SWdnSFC, SWupSFC, SWup200, SWdnTOA, SWupTOA, SWdn200, SWdnSFCclr, SWupSFCclr, SWupTOAclr, t2m, t2m_max, t2m_min, taux, taux_ter, taux_sic, taux_lic, taux_oce, tauy, tauy_ter, tauy_sic, tauy_lic, tauy_oce, lat_ter, lat_sic, lat_lic, lat_oce, nettop, pbase, ptop, topl0, topl, tops0, tops, topswad, topswai, tsol, tsol_ter, tsol_lic, tsol_oce, tsol_sic , u10m, u500, v10m, v500, w500, pourc_ter, pourc_oce, pourc_sic, pourc_lic, wind10m, od550aer, od550lt1aer, absvisaer, loadoa, loadbc, loadso4, loaddust, loadss, sconcoa, sconcbc, sconcso4, sconcdust, sconcss, reffclwtop, cldncl, swtoaas_ant, swtoacs_ant, swtoacf_ant, swsrfas_ant, swsrfcs_ant, swsrfcf_ant, swtoaas_nat, swtoacs_nat, swtoacf_nat, swsrfas_nat, swsrfcs_nat, swsrfcf_nat, solswai, solswad, swtoacf_zero, swsrfcf_zero)
126ChunckJob2D = 100Y
127TimeSeriesVars3D = (upwd, lwcon, iwcon, lcc3dcon, lcc3dstra, temp, theta, ovap, ovapinit, geop, vitu, vitv, vitw, pres, rneb, rnebcon, rhum, mc, paprs, scdnc, ec550aer, concoa, concbc, concso4, concss, concdust, reffclws, reffclwc, tnt, dtdyn, dtphy, dtlschr, tntr, tntscpbl, tnhus, dqdyn, dqvdf, tnhusscpbl, dqphy, evu, mcd)
128ChunckJob3D = 100Y
129Seasonal=ON
Note: See TracBrowser for help on using the repository browser.