source: CONFIG/UNIFORM/v6/IPSLCM6/EXPERIMENTS/IPSLESM/AER/piControl_AER_TEST/COMP/inca.card @ 4884

Last change on this file since 4884 was 4884, checked in by acosce, 12 months ago

standardization of inca.driver, inca.def in all default configuration using inca

File size: 5.9 KB
Line 
1#- $Id: inca.card 70 2007-06-21 14:20:42Z acosce $
2[Compatibility]
3libIGCM=1.0
4
5[UserChoices]
6# Set LDMZ_10m_winds to choose if the simulation will use online 10m wind (=y) or offline (=n)
7LMDZ_10m_winds=y
8#choose threshold or weibull10 parameter value
9wind_parameter=0.89
10#choose seasalt correctif
11seasalt_corr=1.15
12# heat fluxes computed with feedback corresponding to 0 --> no aerosol effects, 1--> aerosol effects selected by ok_ade, ok_aie
13feedb=0
14#coupled model with ORCH
15#if yes, you need to put to CHEMISTRY_BVOC=y in orchidee.def and decomment lines for fertilizer and bbg in orchidee.card
16CoupOrchInca=n
17#active or not chemistry flux in output
18calcul_flux=n
19#choose which type of aircraft you will use (0 - 1 - 2 - 3) (no aircraft / old inca aircraft / new subsonic inca aircraft / subsonic + hypersonic inca aircraft)
20flag_plane=1
21#choose which time interpolation you want to interpolate sflx file. ( 0 - 1) (no interpolation / point to point interpolation)
22#be careful name of sflx file change with the choice of emi_interp_time ( no file / sflx_p2p.nc )
23emi_interp_time=1
24#activate the flag cmip_xml if you are running a CMIP experiment
25cmip_xml=y
26
27
28[InitialStateFiles]
29List= ()
30       
31[BoundaryFiles]
32List=(${R_IN}/CHM/IPCC_AR6/SFLX/VERS2/${RESOL_CHM}/ANT/sflx_lmdz_ANT_1850_phy.nc,   sflx_ANT.nc         ),\
33     (${R_IN}/CHM/IPCC_AR6/SFLX/VERS2/${RESOL_CHM}/BBG/sflx_lmdz_BBG_1850_phy.nc,   sflx_BBG.nc         ),\
34     (${R_IN}/CHM/IPCC_AR6/AIRCRAFT/${RESOL_CHM}/aircraft_1850_phy.nc           ,   aircraft_mth.nc     ),\
35     (${R_IN}/CHM/IPCC_AR6/OXYDANTS/${RESOL_CHM}/oxydants_1850.nc            ,   oxydants.nc         )
36
37
38ListNonDel= (${R_IN}/CHM/IPCC_AR6/SFLX/VERS2/${RESOL_CHM}/sflx_lmdz_GHG.nc  ,   sflx_GHG.nc     )\
39            (${R_IN}/CHM/IPCC_AR6/SFLX/VERS2/${RESOL_CHM}/sflx_lmdz_MISC.nc ,   sflx_MISC.nc    )\
40            (${R_IN}/CHM/IPCC_AR6/SFLX/VERS2/${RESOL_CHM}/sflx_lmdz_NAT.nc  ,   sflx_NAT.nc     )\
41            (${R_IN}/CHM/INCA${RESOL_CHM}/landuse.nc                        ,   landuse.nc      )\
42            (${R_IN}/CHM/INCA${RESOL_CHM}/rhvEC_v2.txt                      ,   rhvEC.txt       )\
43            (${R_IN}/CHM/INCA${RESOL_CHM}/wthEC_v2.txt                      ,   wthEC.txt       )\
44            (${R_IN}/CHM/INCA${RESOL_CHM}/clyEC_v2.txt                      ,   clyEC.txt       )\
45            (${R_IN}/CHM/INCA${RESOL_CHM}/wth_v2.dat                        ,   wth.dat         )\
46            (${R_IN}/CHM/INCA${RESOL_CHM}/cly_v2.dat                        ,   cly.dat         )\
47            (${R_IN}/CHM/INCA${RESOL_CHM}/rhv_v2.dat                        ,   rhv.dat         )\
48            (${R_IN}/CHM/INCA${RESOL_CHM}/new_phototable.dat                ,   phototable.dat  )
49
50
51[ParametersFiles]
52List=   (${SUBMIT_DIR}/PARAM/inca.def, .),\
53        (${MODIPSL}/modeles/INCA/src/INCA_XML/context_inca.xml, .)   ,\
54        (${MODIPSL}/modeles/INCA/src/INCA_XML/field_def_inca_CM6.xml, field_def_inca.xml) ,\
55        (${MODIPSL}/modeles/INCA/src/INCA_XML/file_def_inca_restart.xml, .) ,\
56        (${MODIPSL}/modeles/INCA/src/INCA_XML/file_def_inca_AER_daily_CM6.xml, file_def_inca_daily.xml ), \
57        (${MODIPSL}/modeles/INCA/src/INCA_XML/file_def_inca_AER_monthly_CM6.xml, file_def_inca_monthly.xml ), \
58        (${MODIPSL}/bin/inca.dat, .)
59
60[RestartFiles]
61# List restart that have to be saved/restored each loop (file out, saved, and in) :
62List= (reprecipinsoil.dat, precipinsoil.dat, precipinsoil.dat)\
63      (chem_restart.nc, chem_restart.nc, chem_start.nc)
64
65[OutputText]
66List=(inca.out, inca.def,context_inca.xml,field_def_inca.xml,file_def_inca_daily.xml,file_def_inca_monthly.xml)
67
68[OutputFiles]
69List=   (inca1d_emi.nc         ,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_emi.nc        ,    Post_1D_inca_emi   ),\
70        (inca1d_species.nc     ,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_species.nc    ,   Post_1D_inca_species  ),\
71        (inca1d_dep.nc         ,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_dep.nc        ,    NONE  ),\
72        (inca1d_aero.nc        ,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_aero.nc       ,    Post_1D_inca_aero   ),\
73        (inca1d_invariants.nc  ,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_invariants.nc ,    NONE  ),\
74        (inca1d_chem.nc        ,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_chem.nc       ,    NONE  ),\
75        (inca1d_washrate.nc    ,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_washrate.nc   ,    NONE  ),\
76        (inca1m_emi.nc         ,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_emi.nc        ,    NONE  ),\
77        (inca1m_species.nc     ,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_species.nc    ,    NONE  ),\
78        (inca1m_dep.nc         ,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_dep.nc        ,    NONE  ),\
79        (inca1m_aero.nc        ,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_aero.nc       ,    NONE  ),\
80        (inca1m_invariants.nc  ,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_invariants.nc ,    NONE  ),\
81        (inca1m_chem.nc        ,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_chem.nc       ,    NONE  ),\
82        (inca1m_washrate.nc    ,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_washrate.nc   ,    NONE  ),\
83        (aerosols_from_inca.nc   ,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_aerosols_from_inca.nc,    NONE  )
84
85[Post_1D_inca_aero]
86Patches= ()
87GatherWithInternal = (lon, lat, presnivs, time_centered, time_centered_bounds, time_counter, area)
88TimeSeriesVars2D = (loaddustci, loadno3ci, loadbcai, loadoaai, loadsscs, loadso4cs, loadno3cs, loadssas, loadbcas, loadoaas, loadso4as, loadnh4as, loadno3as, loadssss)
89ChunckJob2D = NONE
90TimeSeriesVars3D = ()
91ChunckJob3D = NONE
92Seasonal=OFF
93
94[Post_1D_inca_emi]
95Patches= ()
96GatherWithInternal = (lon, lat, presnivs, time_centered, time_centered_bounds, time_counter, area)
97TimeSeriesVars2D = (emino2, emino3, emihno3, emin2o5, emiso2, emih2s, emidms, emidmso, eminh3, emidustci, emino3ci, eminci, emibcai, emioaai, eminai, emisscs, emiso4cs, eminh4cs, emimsacs, emino3cs, emincs, emissas, emibcas, emioaas, emiso4as, eminh4as, emimsaas, emino3as, eminas, emissss, eminss)
98ChunckJob2D = NONE
99TimeSeriesVars3D = ()
100ChunckJob3D = NONE
101Seasonal=OFF
102
103
104[Post_1D_inca_species]
105Patches= ()
106GatherWithInternal = (lon, lat, presnivs, time_centered, time_centered_bounds,time_counter, area)
107TimeSeriesVars2D = ()
108ChunckJob2D = NONE
109TimeSeriesVars3D = (mmrso4cs, mmrso4as, mmrdms, mmrssss, mmrbcai, mmrdustci, mmrbcas)
110ChunckJob3D = NONE
111Seasonal=OFF
112
113
Note: See TracBrowser for help on using the repository browser.