source: CONFIG/UNIFORM/v6/IPSLCM6/EXPERIMENTS/LMDZORINCA/piClim-control_CMIP6/COMP/inca.card @ 5093

Last change on this file since 5093 was 5093, checked in by acosce, 4 years ago

add new flag to allow the modification of dust emission for specifics cmip6 experiments

File size: 6.8 KB
Line 
1#- $Id: inca.card 70 2007-06-21 14:20:42Z acosce $
2[Compatibility]
3libIGCM=1.0
4
5[UserChoices]
6# Set LDMZ_10m_winds to choose if the simulation will use online 10m wind (=y) or offline (=n)
7LMDZ_10m_winds=y
8#choose threshold or weibull10 parameter value
9wind_parameter=0.89
10#choose seasalt correctif
11seasalt_corr=1.15
12# heat fluxes computed with feedback corresponding to 0 --> no aerosol effects, 1--> aerosol effects selected by ok_ade, ok_aie
13feedb=0
14#coupled model with ORCH
15#if yes, you need to put to CHEMISTRY_BVOC=y in orchidee.def and decomment lines for fertilizer and bbg in orchidee.card
16CoupOrchInca=n
17#active or not chemistry flux in output
18calcul_flux=n
19#choose which type of aircraft you will use (0 - 1 - 2 - 3) (no aircraft / old inca aircraft / new subsonic inca aircraft / subsonic + hypersonic inca aircraft)
20flag_plane=1
21#choose which time interpolation you want to interpolate sflx file. ( 0 - 1) (no interpolation / point to point interpolation)
22#be careful name of sflx file change with the choice of emi_interp_time ( no file / sflx_p2p.nc )
23emi_interp_time=1
24#activate the flag cmip_xml if you are running a CMIP experiment
25cmip_xml=y
26#cmip6 flag to modify dust emission frequency - if fq_flag=y add an input file fq_antro.dat with this frequency for all points
27fq_flag=n
28
29
30[InitialStateFiles]
31List= ()
32       
33[BoundaryFiles]
34List=(${R_IN}/CHM/IPCC_AR6/SFLX/VERS2/${RESOL_CHM}/ANT/sflx_lmdz_ANT_1850_phy.nc,   sflx_ANT.nc         ),\
35     (${R_IN}/CHM/IPCC_AR6/SFLX/VERS2/${RESOL_CHM}/BBG/sflx_lmdz_BBG_1850_phy.nc,   sflx_BBG.nc         ),\
36     (${R_IN}/CHM/IPCC_AR6/AIRCRAFT/${RESOL_CHM}/aircraft_1850_phy.nc           ,   aircraft_mth.nc     ),\
37     (${R_IN}/CHM/IPCC_AR6/OXYDANTS/${RESOL_CHM}/oxydants_1850.nc            ,   oxydants.nc         ),\
38    (${R_IN}/CMIP6/${config_UserChoices_LongName}/${config_UserChoices_ModelName}/${config_UserChoices_ExperimentName}/${config_UserChoices_Member}/${year}/dr2xml_inca.xml, .)
39
40ListNonDel= (${R_IN}/CHM/IPCC_AR6/SFLX/VERS2/${RESOL_CHM}/sflx_lmdz_GHG.nc  ,   sflx_GHG.nc     )\
41            (${R_IN}/CHM/IPCC_AR6/SFLX/VERS2/${RESOL_CHM}/sflx_lmdz_MISC.nc ,   sflx_MISC.nc    )\
42            (${R_IN}/CHM/IPCC_AR6/SFLX/VERS2/${RESOL_CHM}/sflx_lmdz_NAT.nc  ,   sflx_NAT.nc     )\
43            (${R_IN}/CHM/INCA${RESOL_CHM}/landuse.nc                        ,   landuse.nc      )\
44            (${R_IN}/CHM/INCA${RESOL_CHM}/rhvEC_v2.txt                      ,   rhvEC.txt       )\
45            (${R_IN}/CHM/INCA${RESOL_CHM}/wthEC_v2.txt                      ,   wthEC.txt       )\
46            (${R_IN}/CHM/INCA${RESOL_CHM}/clyEC_v2.txt                      ,   clyEC.txt       )\
47            (${R_IN}/CHM/INCA${RESOL_CHM}/wth_v2.dat                        ,   wth.dat         )\
48            (${R_IN}/CHM/INCA${RESOL_CHM}/cly_v2.dat                        ,   cly.dat         )\
49            (${R_IN}/CHM/INCA${RESOL_CHM}/rhv_v2.dat                        ,   rhv.dat         )\
50            (${R_IN}/CHM/INCA${RESOL_CHM}/new_phototable.dat                ,   phototable.dat  )
51
52
53[ParametersFiles]
54List=   (${SUBMIT_DIR}/PARAM/inca.def, .),\
55            (${MODIPSL}/modeles/INCA/src/INCA_XML/ping_INCA_CM6.xml, ping_inca.xml)   ,\
56    (${MODIPSL}/modeles/INCA/src/INCA_XML/context_inca.xml, .)   ,\
57        (${MODIPSL}/modeles/INCA/src/INCA_XML/field_def_inca_CM6.xml, field_def_inca.xml) ,\
58        (${MODIPSL}/modeles/INCA/src/INCA_XML/file_def_inca_restart.xml, .) ,\
59        (${MODIPSL}/modeles/INCA/src/INCA_XML/file_def_inca_AER_daily_CM6.xml, file_def_inca_daily.xml ), \
60        (${MODIPSL}/modeles/INCA/src/INCA_XML/file_def_inca_AER_monthly_CM6.xml, file_def_inca_monthly.xml ), \
61        (${MODIPSL}/bin/inca.dat, .)
62
63[RestartFiles]
64# List restart that have to be saved/restored each loop (file out, saved, and in) :
65List= (reprecipinsoil.dat, precipinsoil.dat, precipinsoil.dat)\
66      (chem_restart.nc, chem_restart.nc, chem_start.nc)
67
68[OutputText]
69List=(inca.out, inca.def,context_inca.xml,field_def_inca.xml,file_def_inca_daily.xml,file_def_inca_monthly.xml)
70
71[OutputFiles]
72List=   (inca1m_forcage.nc     ,     ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_forcage.nc     ,   Post_1M_inca_forcage ),\
73        (inca1m_emi.nc         ,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_emi.nc        ,    Post_1M_inca_emi      ),\
74        (inca1m_species.nc     ,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_species.nc    ,    Post_1M_inca_species  ),\
75        (inca1m_dep.nc         ,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_dep.nc        ,    Post_1M_inca_dep ),\
76        (inca1m_aero.nc        ,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_aero.nc       ,    Post_1M_inca_aero     ),\
77        (inca1m_chem.nc        ,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_chem.nc       ,    NONE  ),\
78        (aerosols_from_inca.nc ,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_aerosols_from_inca.nc,  NONE  )
79
80
81
82[Post_1M_inca_forcage]
83Patches= ()
84GatherWithInternal = (lon, lat, presnivs, time_centered, time_centered_bounds, time_counter, area)
85TimeSeriesVars2D  = (taucld, taucldpi,cldemi,CCM1, CCM2, tautot_550, tauant_550, taunat_550, SOLUBLE_LOAD, SOLUBLE_LOAD_PI, SOLUBLE_LOAD_ANTR, FSWTOAAS_AI, FSWSRFAS_AI, SWTOAAS_AI, SWSRFAS_AI, cforcTOA_0, cforcSRF_0, DcforcTOA_NAT, DcforcSRF_NAT, FcforcTOA_ANTR, DcforcSRF_ANTR, CLOUDfract, cRFtoa_nat, cRFsrf_nat, cRFtoa_antr, SWTOAAS_AD, SWTOACS_AD, SWSRFAS_AD, SWSRFCS_AD, tops, tops0, topl, topl0)
86ChunckJob2D = NONE
87TimeSeriesVars3D = ()
88ChunckJob3D= ()
89Seasonal=OFF
90
91[Post_1M_inca_aero]
92Patches= ()
93GatherWithInternal = (lon, lat, presnivs, time_centered, time_centered_bounds, time_counter, area)
94TimeSeriesVars2D = (loaddustci, loadno3ci, loadbcai, loadoaai, loadsscs, loadso4cs, loadno3cs, loadssas, loadbcas, loadoaas, loadso4as, loadnh4as, loadno3as, loadssss, loaddms, loaddmso, loadso2  )
95ChunckJob2D = NONE
96TimeSeriesVars3D = ()
97ChunckJob3D = NONE
98Seasonal=OFF
99
100[Post_1M_inca_emi]
101Patches= ()
102GatherWithInternal = (lon, lat, presnivs, time_centered, time_centered_bounds, time_counter, area)
103TimeSeriesVars2D = (emino2, emino3, emihno3, emin2o5, emiso2, emih2s, emidms, emidmso, eminh3, emidustci, emino3ci, eminci, emibcai, emioaai, eminai, emisscs, emiso4cs, eminh4cs, emimsacs, emino3cs, emincs, emissas, emibcas, emioaas, emiso4as, eminh4as, emimsaas, emino3as, eminas, emissss, eminss, emioa, emiss, emibc, eminox)
104ChunckJob2D = NONE
105TimeSeriesVars3D = ()
106ChunckJob3D = NONE
107Seasonal=OFF
108
109
110[Post_1M_inca_species]
111Patches= ()
112GatherWithInternal = (lon, lat, presnivs, time_centered, time_centered_bounds,time_counter, area)
113TimeSeriesVars2D = ()
114ChunckJob2D = NONE
115TimeSeriesVars3D = (mmrso4cs, mmrso4as, mmrdms, mmrssss, mmrbcai, mmrdustci, mmrbcas)
116ChunckJob3D = NONE
117Seasonal=OFF
118
119
120[Post_1M_inca_dep]
121Patches= ()
122GatherWithInternal = (lon, lat, presnivs, time_centered, time_centered_bounds,time_counter, area)
123TimeSeriesVars2D = (dryoaai,dryoaas,dryso4as,dryssas,drysscs,dryssss,drybcas,drybcai, sedoaai, sedoaas, sedso4as, sedssas, sedsscs, sedssss, sedbcas, sedbcai, wetso2, wetdms, wetdmso, wetnh3, wetnoy, wetbc, wetoa, wetss, wetdustci, wetnh4as, wetoaai, wetoaas, wetso4as, wetssas, wetsscs, wetssss, wetbcas, wetbcai)
124ChunckJob2D = NONE
125TimeSeriesVars3D = ()
126ChunckJob3D = NONE
127Seasonal=OFF
128
Note: See TracBrowser for help on using the repository browser.