source: CONFIG/UNIFORM/v6/IPSLCM6/GENERAL/DRIVER/lmdz.driver @ 3127

Last change on this file since 3127 was 3127, checked in by jgipsl, 4 years ago
  • Added comments in Script_Output for the parameter solaire which is always modified but only used for new physics.
  • Added comment in monitoring title
  • corrected bad settings in diff_configurations.ksh script
File size: 24.3 KB
Line 
1#!/bin/ksh
2#-----------------------------------------------------------------
3function ATM_Initialize
4{
5    IGCM_debug_PushStack "ATM_Initialize"
6
7    RESOL_ATM=$( echo $RESOL | awk "-Fx" '{print $2}' | awk "-F-" '{print $1}')
8
9    [ -f ${SUBMIT_DIR}/../.resol ] && eval $(grep RESOL_ATM_3D ${SUBMIT_DIR}/../.resol) || RESOL_ATM_3D=96x95x39
10
11    RESOL_ATM_Z=$( echo ${RESOL_ATM_3D} | awk "-Fx" '{print $3}' )
12    RESOL_ATM_X=$( echo ${RESOL_ATM_3D} | awk "-Fx" '{print $1}' )
13    RESOL_ATM_Y=$( echo ${RESOL_ATM_3D} | awk "-Fx" '{print $2}' )
14    RESOL_ATM_XY="${RESOL_ATM_X}x${RESOL_ATM_Y}"
15
16    ##- LMDZ physics version
17    ##  Read LMDZ_Physics option in lmdz.card, if not present take default value AP (old physics)
18    if [ ! X${lmdz_UserChoices_LMDZ_Physics} = X ] ; then
19        LMDZ_Physics=${lmdz_UserChoices_LMDZ_Physics}
20    else
21        LMDZ_Physics=AP
22    fi
23    echo LMDZ physics version : ${LMDZ_Physics}
24
25    ##- Create_etat0_limit version
26    ##  Define variable CREATE only if it is set in lmdz.card section UserChoices.
27    ##  This variable is only used in lmdz.card to choose input files.
28    if [ ! X${lmdz_UserChoices_CREATE} = X ] ; then
29        IGCM_card_DefineVariableFromOption ${SUBMIT_DIR}/COMP/lmdz.card UserChoices CREATE
30        CREATE=${lmdz_UserChoices_CREATE}
31        echo create_etat0_limit version : ${CREATE}
32    fi
33
34
35    ## - LMDZ choice of config.def file
36    ##   ConfType must be set in lmdz.card
37    ConfType=${lmdz_UserChoices_ConfType}
38
39    ##- LMDZ output level, to be set in lmdz.card
40    if [ X${lmdz_UserChoices_OutLevel} = X ] ; then
41        # OutLevel is not set. Take default value low.
42        OutLevel=low
43    else
44        OutLevel=${lmdz_UserChoices_OutLevel}
45    fi
46
47    ##-- Output frequency purpose ....
48    ##--  Initialisation  ....
49    ok_mensuel=.FALSE.
50    ok_journe=.FALSE.
51    ok_hf=.FALSE.
52    ok_hf3h=.FALSE.
53    ok_hf3hm=.FALSE.
54    ok_stn=.FALSE.
55
56    case ${config_UserChoices_PeriodLength} in
57        1Y|1y|1M|1m) ok_mensuel=.TRUE. ;;
58        5D|5d|1D|1d) ok_journe=.TRUE. ;;
59    esac
60
61    for frequency in ${config_ATM_WriteFrequency} ; do
62        case ${frequency} in
63            1M|1m) ok_mensuel=.TRUE. ;;
64        esac
65        case ${frequency} in
66            5D|5d|1D|1d) ok_journe=.TRUE. ;;
67        esac
68        case ${frequency} in
69            HF|hf) ok_hf=.TRUE. ;;
70        esac
71        case ${frequency} in
72            HF3h|hf3h) ok_hf3h=.TRUE. ;;
73        esac
74        case ${frequency} in
75            HF3hm|hf3hm) ok_hf3hm=.TRUE. ;;
76        esac
77        case ${frequency} in
78            STN|stn) ok_stn=.TRUE. ;;
79        esac
80    done
81
82    ##  Read LMDZ_COSP_OK in lmdz.card
83    if [ X${lmdz_UserChoices_LMDZ_COSP_OK} = Xy ] ; then
84        ##  LMDZ_COSP_OK=y, now read all other COSP variables
85        ##  Read LMDZ_COSP_monthly in lmdz.card
86        if [ X${lmdz_UserChoices_LMDZ_COSP_monthly} = Xy ] ; then
87            LMDZ_COSP_monthly=.TRUE.
88        else
89            LMDZ_COSP_monthly=.FALSE.
90        fi
91        ##  Read LMDZ_COSP_daily in lmdz.card
92        if [ X${lmdz_UserChoices_LMDZ_COSP_daily} = Xy ] ; then
93            LMDZ_COSP_daily=.TRUE.
94        else
95            LMDZ_COSP_daily=.FALSE.
96        fi
97        ##  Read LMDZ_COSP_hf in lmdz.card
98        if [ X${lmdz_UserChoices_LMDZ_COSP_hf} = Xy ] ; then
99            LMDZ_COSP_hf=.TRUE.
100        else
101            LMDZ_COSP_hf=.FALSE.
102        fi
103    else
104        # LMDZ_COSP_OK=n : All cosp output are deactivated
105        LMDZ_COSP_monthly=.FALSE.
106        LMDZ_COSP_daily=.FALSE.
107        LMDZ_COSP_hf=.FALSE.
108    fi 
109
110    ##  Read LMDZ_NMC_monthly in lmdz.card
111    if [ X${lmdz_UserChoices_LMDZ_NMC_monthly} = Xy ] ; then
112        LMDZ_NMC_monthly=.TRUE.
113    else
114        LMDZ_NMC_monthly=.FALSE.
115    fi
116   
117    ## Read LMDZ_NMC_daily in lmdz.card
118    if [ X${lmdz_UserChoices_LMDZ_NMC_daily} = Xy ] ; then
119        LMDZ_NMC_daily=.TRUE.
120    else
121        LMDZ_NMC_daily=.FALSE.
122    fi
123   
124    ## Read LMDZ_NMC_hf in lmdz.card
125    if [ X${lmdz_UserChoices_LMDZ_NMC_hf} = Xy ] ; then
126        LMDZ_NMC_hf=.TRUE.
127    else
128        LMDZ_NMC_hf=.FALSE.
129    fi
130   
131
132    IGCM_debug_PopStack "ATM_Initialize"
133}
134
135#-----------------------------------------------------------------
136function ATM_Update
137{
138    IGCM_debug_PushStack "ATM_Update"
139
140    ##-- GHG forcing :
141    ##   If forcing file exist in run directory, read values for the current year
142    ##   and set in config.def. If not use the default value set in config.def
143
144    # Read value for solaire from file SOLARANDVOLCANOES.txt. If file not existing, take DEFAULT value from file.
145    IGCM_debug_Print 1 "Note that the solaire parameter is here below changed but it is only used by LMDZ for old physics(AP and NPv3.2)"
146    IGCM_debug_Print 1 "For newer physics with iflag_rrtm=1 and ok_suntime_rrtm=y, the solar constant is instead taken from solarforcing.nc file"
147    if [ -f SOLARANDVOLCANOES.txt ] ; then
148        value=`grep Annee_${year} SOLARANDVOLCANOES.txt | awk -F= '{print $2}'`
149        if [ X"${value}" = X ] ; then
150            # The grep returned empty variable, stop execution
151            IGCM_debug_Exit "The file SOLARANDVOLCANOES.txt do not contain the current year."
152            IGCM_debug_Verif_Exit
153        fi
154    else
155        value=DEFAULT
156    fi
157    IGCM_comp_modifyDefFile nonblocker config.def solaire $value
158
159
160    # Read value for co2_ppm from file CO2.txt. If file not existing, take DEFAULT value from file.
161    if [ -f CO2.txt ] ; then
162        value=`grep Annee_${year} CO2.txt | awk -F= '{print $2}'`
163        if [ X"${value}" = X ] ; then
164            # The grep returned empty variable, stop execution
165            IGCM_debug_Exit "The file CO2.txt do not contain the current year."
166            IGCM_debug_Verif_Exit
167        fi
168    else
169        value=DEFAULT
170    fi
171    IGCM_comp_modifyDefFile nonblocker config.def co2_ppm $value
172
173
174    # Read value for CH4_ppb from file CH4.txt. If file not existing, take DEFAULT value from file.
175    if [ -f CH4.txt ] ; then
176        value=`grep Annee_${year} CH4.txt | awk -F= '{print $2}'`
177        if [ X"${value}" = X ] ; then
178            # The grep returned empty variable, stop execution
179            IGCM_debug_Exit "The file CH4.txt do not contain the current year."
180            IGCM_debug_Verif_Exit
181        fi
182    else
183        value=DEFAULT
184    fi
185    IGCM_comp_modifyDefFile nonblocker config.def CH4_ppb $value
186
187
188    # Read value for N2O_ppb from file N2O.txt. If file not existing, take DEFAULT value from file.
189    if [ -f N2O.txt ] ; then
190        value=`grep Annee_${year} N2O.txt | awk -F= '{print $2}'`
191        if [ X"${value}" = X ] ; then
192            # The grep returned empty variable, stop execution
193            IGCM_debug_Exit "The file N2O.txt do not contain the current year."
194            IGCM_debug_Verif_Exit
195        fi
196    else
197        value=DEFAULT
198    fi
199    IGCM_comp_modifyDefFile nonblocker config.def N2O_ppb $value
200
201    # Read value for CFC11_ppt from file CFC11.txt. If file not existing, take DEFAULT value from file.
202    if [ -f CFC11.txt ] ; then
203        value=`grep Annee_${year} CFC11.txt | awk -F= '{print $2}'`
204        if [ X"${value}" = X ] ; then
205            # The grep returned empty variable, stop execution
206            IGCM_debug_Exit "The file CFC11.txt do not contain the current year."
207            IGCM_debug_Verif_Exit
208        fi
209    else
210        value=DEFAULT
211    fi
212    IGCM_comp_modifyDefFile nonblocker config.def CFC11_ppt $value
213
214
215    # Read value for CFC12_ppt from file CFC12.txt. If file not existing, take DEFAULT value from file.
216    if [ -f CFC12.txt ] ; then
217        value=`grep Annee_${year} CFC12.txt | awk -F= '{print $2}'`
218        if [ X"${value}" = X ] ; then
219            # The grep returned empty variable, stop execution
220            IGCM_debug_Exit "The file CFC12.txt do not contain the current year."
221            IGCM_debug_Verif_Exit
222        fi
223    else
224        value=DEFAULT
225    fi
226    IGCM_comp_modifyDefFile nonblocker config.def CFC12_ppt $value
227
228
229    ## Coupling Time Step : Take value of FreqCoupling set in oasis.card or if it is not set, take default value 86400
230    LMDZ_t_coupl=${oasis_UserChoices_FreqCoupling:-86400}
231    IGCM_debug_Print 3 "LMDZ_t_coupl "   ${LMDZ_t_coupl}
232    IGCM_comp_modifyDefFile nonblocker config.def t_coupl   ${LMDZ_t_coupl} 
233
234    ##-- Add special treatement for CARBON CYCLE
235    if [ X"${lmdz_UserChoices_CARBON_CYCLE}" = X"control" ] || [ X"${lmdz_UserChoices_CARBON_CYCLE}" = X"historical" ] ; then
236        ATM_Carbon_Update
237    fi
238
239
240    ##-- Set LMDZ_COSP_daily1979=y in section UserChoices in lmdz.card to activate
241    ##   COSP daily output for years 1979 and later (mandatory for historical CMIP5 run).
242    if ([ X"${lmdz_UserChoices_LMDZ_COSP_daily1979}" = X"y" ] &&  [ ${year} -ge 1979 ]) ; then
243        LMDZ_COSP_daily=.TRUE.
244    fi
245
246    ## Modifiy
247    IGCM_comp_modifyXmlFile nonblocker file_def_histmth_lmdz.xml histmth enabled ${ok_mensuel}
248   
249    IGCM_comp_modifyXmlFile nonblocker file_def_histday_lmdz.xml histday enabled ${ok_journe}
250   
251    if [ X${OutLevel} = Xlow ] || [ X${OutLevel} = Xmedium ] ; then
252        IGCM_comp_modifyXmlFile nonblocker file_def_histday_lmdz.xml histday output_level 2
253    else
254        IGCM_comp_modifyXmlFile nonblocker file_def_histday_lmdz.xml histday output_level 5
255    fi
256   
257    IGCM_comp_modifyXmlFile nonblocker file_def_histhf_lmdz.xml histhf enabled ${ok_hf}
258   
259    if [ X${OutLevel} = Xlow ] ; then
260        IGCM_comp_modifyXmlFile nonblocker file_def_histhf_lmdz.xml histhf output_level 5
261    elif [ X${OutLevel} = Xmedium ] ; then
262        IGCM_comp_modifyXmlFile nonblocker file_def_histhf_lmdz.xml histhf output_level 6
263    elif [ X${OutLevel} = Xhigh ] ; then
264        IGCM_comp_modifyXmlFile nonblocker file_def_histhf_lmdz.xml histhf output_level 7
265    fi
266       
267    IGCM_comp_modifyXmlFile nonblocker file_def_histhf3h_lmdz.xml histhf3h enabled ${ok_hf3h}
268    IGCM_comp_modifyXmlFile nonblocker file_def_histhf3hm_lmdz.xml histhf3hm enabled ${ok_hf3hm}
269
270    IGCM_comp_modifyXmlFile nonblocker file_def_histstn_lmdz.xml histstn enabled ${ok_stn}
271
272    IGCM_comp_modifyXmlFile nonblocker file_def_histmthNMC_lmdz.xml histmthNMC enabled ${LMDZ_NMC_monthly}
273    IGCM_comp_modifyXmlFile nonblocker file_def_histdayNMC_lmdz.xml histdayNMC enabled ${LMDZ_NMC_daily}
274    IGCM_comp_modifyXmlFile nonblocker file_def_histhfNMC_lmdz.xml histhfNMC enabled ${LMDZ_NMC_hf}
275   
276    IGCM_comp_modifyXmlFile nonblocker file_def_histmthCOSP_lmdz.xml histmthCOSP enabled ${LMDZ_COSP_monthly}
277    IGCM_comp_modifyXmlFile nonblocker file_def_histdayCOSP_lmdz.xml histdayCOSP enabled ${LMDZ_COSP_daily}
278    IGCM_comp_modifyXmlFile nonblocker file_def_histhfCOSP_lmdz.xml histhfCOSP enabled ${LMDZ_COSP_hf}
279
280    # Activate the histstrataer output file only for configuration with interactive stratospheric aersols
281    # done by setting the key word LMDZ_strataero=y in lmdz.card
282    if [ X${lmdz_UserChoices_LMDZ_strataero} = Xy ] ; then
283        IGCM_comp_modifyXmlFile nonblocker file_def_histstrataer_lmdz.xml histstrataer enabled .TRUE.
284    else
285        IGCM_comp_modifyXmlFile nonblocker file_def_histstrataer_lmdz.xml histstrataer enabled .FALSE.
286    fi
287
288
289    ## run.def parameters
290
291
292    ##-- Remise ou non a zero de la date initiale de LMDZ pour le fichier run.def
293    if [ ${CumulPeriod} -eq 1 ] ; then
294        IGCM_comp_modifyDefFile blocker run.def raz_date  1
295    else
296        IGCM_comp_modifyDefFile blocker run.def raz_date  0
297    fi
298
299    ##-- Calendar type for LMDZ and create_etat0_limit
300    case ${config_UserChoices_CalendarType} in
301        leap|gregorian)
302            IGCM_comp_modifyDefFile blocker run.def calend  gregorian ;;
303        noleap)
304            IGCM_comp_modifyDefFile blocker run.def calend  earth_365d ;;
305        360d)
306            IGCM_comp_modifyDefFile blocker run.def calend  earth_360d ;;
307        *)
308            IGCM_comp_modifyDefFile blocker run.def calend  earth_360d ;;
309    esac
310
311    IGCM_comp_modifyDefFile blocker run.def dayref    ${InitDay}
312    IGCM_comp_modifyDefFile blocker run.def nday      ${PeriodLengthInDays}
313
314    # Set anneeref different for gcm and ce0l
315    # Test if executable create_etat0_limit is present and lmdz.x is not present
316    if [ -f create_etat0_limit* ] || [ -f ce0l* ] && [ ! -f lmdz.x ] ; then
317        # for case ce0l : always take current year
318        IGCM_comp_modifyDefFile blocker run.def anneeref ${year}
319
320        # Temporary, set use_filtre_fft=n because we now use dyn3d for ce0l version where fft is not implemented.
321        # In more recent versions of LMDZ, this will not be needed.
322        IGCM_comp_modifyDefFile force   run.def use_filtre_fft n
323    else
324        # for case gcm : take first year of simulation
325        IGCM_comp_modifyDefFile blocker run.def anneeref ${InitYear}
326    fi
327
328    ## Determine from the variable ListOfComponents in config.card coupling to external models
329    ## and set corresponding parameters in run.def
330    echo ListOfComponents now running : ${config_ListOfComponents[*]}
331
332    if [ X${config_ListOfComponents_SRF} = Xorchidee ] ; then
333        echo "Activate ORCHIDEE, set VEGET=y in run.def"
334        IGCM_comp_modifyDefFile blocker run.def VEGET y
335    else
336        echo "No ORCHIDEE, set VEGET=n in run.def"
337        IGCM_comp_modifyDefFile blocker run.def VEGET n
338    fi
339
340    if [ X${config_ListOfComponents_CPL} = Xoasis ] ; then
341        echo "Activate coupling to ocean, set type_ocean=couple in run.def"
342        IGCM_comp_modifyDefFile blocker run.def type_ocean couple
343    else
344        echo "LMDZ is running in forced mode without ocean model, set type_ocean=force in run.def"
345        IGCM_comp_modifyDefFile blocker run.def type_ocean force
346    fi
347
348    if [ X${config_ListOfComponents_CHM} = Xinca ] ; then
349        echo "Activate coupling to INCA, set type_trac=inca in run.def"
350        IGCM_comp_modifyDefFile blocker run.def type_trac inca
351    elif [ X${config_ListOfComponents_CHM} = Xreprobus ] ; then
352        echo "Activate coupling to REPROBUS, set type_trac=repr in run.def"
353        IGCM_comp_modifyDefFile blocker run.def type_trac repr
354        IGCM_comp_modifyDefFile blocker run.def config_inca none
355    else
356        echo "No coupling to chemistry model, set type_trac=lmdz in run.def"
357        IGCM_comp_modifyDefFile blocker run.def type_trac lmdz
358        IGCM_comp_modifyDefFile blocker run.def config_inca none
359    fi
360
361
362    # config.def : Activate direct radiative effect if ok_ade=y
363    if [ ! X${lmdz_UserChoices_ok_ade} = X ]; then
364        IGCM_comp_modifyDefFile nonblocker config.def ok_ade ${lmdz_UserChoices_ok_ade}
365    else
366        IGCM_comp_modifyDefFile nonblocker config.def ok_ade n
367    fi 
368
369    # config.def : Activate indirect radiative effect if ok_aie=y
370    if [ ! X${lmdz_UserChoices_ok_aie} = X ]; then
371        IGCM_comp_modifyDefFile nonblocker config.def ok_aie ${lmdz_UserChoices_ok_aie}
372    else
373        IGCM_comp_modifyDefFile nonblocker config.def ok_aie n
374    fi 
375
376    # config.def : Activate online aerosol coupled model if aerosol_couple=y
377    if [ ! X${lmdz_UserChoices_aerosol_couple} = X ]; then
378        IGCM_comp_modifyDefFile nonblocker config.def aerosol_couple ${lmdz_UserChoices_aerosol_couple}
379    else
380        IGCM_comp_modifyDefFile nonblocker config.def aerosol_couple n
381    fi 
382
383    # config.def : Activate reading of ozone in climatology if read_climoz=2
384    if [ ! X${lmdz_UserChoices_read_climoz} = X ]; then
385        IGCM_comp_modifyDefFile nonblocker config.def read_climoz ${lmdz_UserChoices_read_climoz}
386    else
387        IGCM_comp_modifyDefFile nonblocker config.def read_climoz 0     
388    fi 
389
390    # config.def : Choose aerosol use in radiative effect
391    #  type of coupled aerosol =1 (default) =2 => bc  only =3 => pom only =4 => seasalt only
392    # =5 => dust only =6 => all aerosol   
393    if [ ! X${lmdz_UserChoices_flag_aerosol} = X ]; then
394        IGCM_comp_modifyDefFile nonblocker config.def flag_aerosol ${lmdz_UserChoices_flag_aerosol}
395    else
396        IGCM_comp_modifyDefFile nonblocker config.def flag_aerosol 0
397    fi 
398
399    # config.def : Activate calcul of Cloud droplet number concentration if ok_cdnc=y
400    if [ ! X${lmdz_UserChoices_ok_cdnc} = X ]; then
401        IGCM_comp_modifyDefFile nonblocker config.def ok_cdnc ${lmdz_UserChoices_ok_cdnc}
402    else
403        IGCM_comp_modifyDefFile nonblocker config.def ok_cdnc n
404    fi 
405
406    # config.def : Activate COSP
407    if [ ! X${lmdz_UserChoices_LMDZ_COSP_OK} = X ]; then
408        IGCM_comp_modifyDefFile nonblocker config.def ok_cosp ${lmdz_UserChoices_LMDZ_COSP_OK}
409    else
410        IGCM_comp_modifyDefFile nonblocker config.def ok_cosp n
411    fi 
412
413    # config.def : Modify parameter pmagic if it is set in lmdz.card
414    if [ ! X${lmdz_UserChoices_pmagic} = X ]; then
415        IGCM_comp_modifyDefFile nonblocker config.def pmagic ${lmdz_UserChoices_pmagic}
416    else
417        # Take default value set in config.def
418        IGCM_comp_modifyDefFile nonblocker config.def pmagic DEFAULT
419    fi 
420
421    # guide.def : Activate nudging if ok_guide=y set in lmdz.card
422    if [ ! X${lmdz_UserChoices_ok_guide} = X ] ; then
423        IGCM_comp_modifyDefFile nonblocker guide.def ok_guide  ${lmdz_UserChoices_ok_guide}
424    else
425        IGCM_comp_modifyDefFile nonblocker guide.def ok_guide n
426    fi
427
428    ## Read ByPass_hgardfou_teta option in lmdz.card --> divide teta* by 2 if [ $ByPass_hgardfou_teta = 1 ]
429    ByPass_hgardfou_teta=${lmdz_UserChoices_ByPass_hgardfou_teta}
430    if [ X"${ByPass_hgardfou_teta}" = X"y" ] ; then
431        awk '{ if ($0 ~ /^teta.*=/) {split($0,a,"=") ; print a[1]"="a[2]/2"."} else print $0}' gcm.def > gcm.def.tmp
432        IGCM_sys_Mv gcm.def.tmp gcm.def
433        echo
434        IGCM_debug_Print 1 "ByPass_hgardfou_teta : ^teta*/2 in gcm.def"
435        echo
436        cat gcm.def
437        ByPass_hgardfou_teta=n
438        IGCM_card_WriteOption ${SUBMIT_DIR}/COMP/lmdz.card UserChoices ByPass_hgardfou_teta "${ByPass_hgardfou_teta}"
439    fi
440
441    ## Read ByPass_hgardfou_mats option in lmdz.card --> purmats=y 2 if [ $ByPass_hgardfou_mats = 1 ]
442    ByPass_hgardfou_mats=${lmdz_UserChoices_ByPass_hgardfou_mats}
443    if [ X"${ByPass_hgardfou_mats}" = X"y" ] ; then
444        sed -e "s/^purmats=.*/purmats=y/" gcm.def > gcm.def.tmp
445        IGCM_sys_Mv gcm.def.tmp gcm.def
446        echo
447        IGCM_debug_Print 1 "ByPass_hgardfou_mats : purmats=y in gcm.def"
448        echo
449        cat gcm.def
450        ByPass_hgardfou_mats=n
451        IGCM_card_WriteOption ${SUBMIT_DIR}/COMP/lmdz.card UserChoices ByPass_hgardfou_mats "${ByPass_hgardfou_mats}"
452    fi
453
454    # Add include of LMDZ context in iodef.xml
455    # In iodef.xml add on next line after "COMPONENT CONTEXT"
456    #  <context id="LMDZ" src="./context_lmdz.xml"/>
457    echo '<context id="LMDZ" src="./context_lmdz.xml"/>' > add.tmp
458    cp iodef.xml iodef.xml.tmp
459    sed -e "/COMPONENT CONTEXT/r add.tmp" iodef.xml.tmp > iodef.xml
460    rm iodef.xml.tmp add.tmp
461
462    #Long Name as global attribute (if LongName is not empty)
463    if [ ! "X${config_UserChoices_LongName}" = "X" ] ; then
464        listfile=$(ls file_def*lmdz.xml)
465        echo "<variable id=\"LongName\" type=\"string\">${config_UserChoices_LongName}</variable>" > add.tmp
466        for file in ${listfile}
467        do
468            cp ${file} ${file}.tmp
469            sed -e "/<file id/r add.tmp" \
470                ${file}.tmp > ${file}
471            rm ${file}.tmp
472        done
473        rm add.tmp
474    fi
475           
476    IGCM_debug_PopStack "ATM_Update"
477}
478
479#-----------------------------------
480function ATM_Finalize
481{
482    IGCM_debug_PushStack "ATM_Finalize"
483
484    # Add special treatement for CARBON CYCLE
485    if [ X"${lmdz_UserChoices_CARBON_CYCLE}" = X"control" ] || [ X"${lmdz_UserChoices_CARBON_CYCLE}" = X"historical" ] ; then
486        ATM_Carbon_Finalize
487    fi
488
489    echo FINALIZE ATM !
490
491    IGCM_debug_PopStack "ATM_Finalize"
492}
493
494
495
496function ATM_Carbon_Update
497{
498    # This fuction will be called only if CARBON_CYCLE is set to control or historical in lmdz.card
499
500    IGCM_debug_PushStack "ATM_Carbon_Update"
501
502    typeset InitPeriodCo2 InitDateBeginCo2 InitDateEndCo2
503    typeset CO2SBG CO2MBG CO2LU CO2_ppm CO2_ppm_prec fCO2_ff
504    typeset PathCO2log
505    typeset PreviousLinelog LastPeriodDateBegin LastPeriodDateEnd LastDatesPeriod LastPREFIX
506   
507    if ( ${FirstInitialize} && [ X"${config_ATM_Restart}" = X"n" ] ) ; then
508        ##--Initialization of fluxes to an undefined value at the first run
509        UndefinedValueCo2=-9999
510        InitPeriodCo2=0
511        InitDateBeginCo2=${UndefinedValueCo2}
512        InitYearCo2=$(( ${year} - 1 )) 
513        InitDateEndCo2=${InitYearCo2}1231
514        fCO2_ff=${UndefinedValueCo2} 
515        CO2SBG=${UndefinedValueCo2}
516        CO2LU=${UndefinedValueCo2}
517        CO2MBG=${UndefinedValueCo2}
518        CO2_ppm_prec=${UndefinedValueCo2}
519        # Get the initial value of atmosp. pco2
520        CO2_ppm=${lmdz_UserChoices_co2_init}
521       
522        IGCM_sys_Cp ${SUBMIT_DIR}/co2.log.init ${SUBMIT_DIR}/co2.log
523        IGCM_sys_Chmod u+w ${SUBMIT_DIR}/co2.log
524       
525        # Save CO2 values in ExeCpuLog variable contents 5 fields
526        echo "${InitPeriodCo2} ${InitDateBeginCo2} ${InitDateEndCo2} ${CO2_ppm} ${CO2_ppm_prec} ${fCO2_ff} ${CO2MBG} ${CO2SBG} ${CO2LU}" |   \
527            gawk '{printf("  %11d | %15s | %15s | %22.15g | %20.15g | %11.8g | %11.8g | %12.8g | %12.8g \n", \
528                              $1,$2,$3,$4,$5,$6,$7,$8,$9)}' >> ${SUBMIT_DIR}/co2.log
529       
530        # Get the path where the log file co2.log is
531        PathCO2log=${SUBMIT_DIR} 
532        # Get Previous line in co2.log
533        PreviousLinelog=$( tail -1 ${PathCO2log}/co2.log )
534       
535    else
536       
537        # NEW parameter in config.card (even for Overule all restarts, you must modify the line after this comment ):
538        # !! NEW for Carbone cycle !! Path where to find old co2.log file for restart CO2.
539        #SubmitRestartPath=
540        if ( ${FirstInitialize} && [ X"${config_ATM_Restart}" = X"y" ] ) ; then
541            IGCM_card_DefineVariableFromOption ${SUBMIT_DIR}/config.card ATM SubmitRestartPath
542            PathCO2log=${config_ATM_SubmitRestartPath}
543            Date_r=$( IGCM_date_ConvertFormatToGregorian ${config_ATM_RestartDate} )
544            PreviousLinelog=$( grep ${Date_r} ${PathCO2log}/co2.log )
545           
546            IGCM_sys_Cp ${SUBMIT_DIR}/co2.log.init ${SUBMIT_DIR}/co2.log
547            IGCM_sys_Chmod u+w ${SUBMIT_DIR}/co2.log
548           
549            # Save Last Line of control in new co2.log file
550            InitPeriodCo2=0   
551            InitDateBeginCo2=$( echo "${PreviousLinelog[*]}" | gawk -F '|' '{gsub(" ",""); print $2}' )
552            InitDateEndCo2=$( echo "${PreviousLinelog[*]}" | gawk -F '|' '{gsub(" ",""); print $3}' )
553            fCO2_ff=$( echo "${PreviousLinelog[*]}" | gawk -F '|' '{gsub(" ",""); print $6}' )
554            CO2SBG=$( echo "${PreviousLinelog[*]}" | gawk -F '|' '{gsub(" ",""); print $8}' )
555            CO2LU=$( echo "${PreviousLinelog[*]}" | gawk -F '|' '{gsub(" ",""); print $9}' )
556            CO2MBG=$( echo "${PreviousLinelog[*]}" | gawk -F '|' '{gsub(" ",""); print $7}' )
557            CO2_ppm_prec=$( echo "${PreviousLinelog[*]}" | gawk -F '|' '{gsub(" ",""); print $5}' )
558            CO2_ppm=$( echo "${PreviousLinelog[*]}" | gawk -F '|' '{gsub(" ",""); print $4}' )
559           
560            echo "${InitPeriodCo2} ${InitDateBeginCo2} ${InitDateEndCo2} ${CO2_ppm} ${CO2_ppm_prec} ${fCO2_ff} ${CO2MBG} ${CO2SBG} ${CO2LU}" |   \
561                gawk '{printf("  %11d | %15s | %15s | %22.15g | %20.15g | %11.8g | %11.8g | %12.8g | %12.8g \n", \
562                              $1,$2,$3,$4,$5,$6,$7,$8,$9)}' >> ${SUBMIT_DIR}/co2.log
563        else
564           # Get restart line in co2.log
565            PathCO2log=${SUBMIT_DIR}
566            PreviousLinelog=$( tail -1 ${PathCO2log}/co2.log )
567           # Get the value of atmosp. pco2 in co2.log
568            CO2_ppm=$( echo "${PreviousLinelog[*]}" | gawk -F '|' '{gsub(" ",""); print $4}' )
569        fi
570       
571    fi
572   
573    if [ ${lmdz_UserChoices_CARBON_CYCLE} = historical ] ; then
574        # Modify co2_ppm in config.def only for historical run
575        # If not historical run, keep co2_ppm value set earlier by IGCM_comp_modifyDefFile
576        IGCM_comp_modifyDefFile force config.def co2_ppm     ${CO2_ppm}
577    fi
578    IGCM_debug_PopStack "ATM_Carbon_Update"
579}
580
581
582function ATM_Carbon_Finalize
583{
584    # This fuction will be called only if CARBON_CYCLE is set to control or historical in lmdz.card
585
586    IGCM_debug_PushStack "ATM_Carbon_Finalize"
587
588    typeset CO2SBG_3V CO2SBG CO2MBG CO2SRF CO2LU CO2_ppm CO2_ppm_prec fCO2_ff
589   
590        # Fossil fuel emission
591    if [ ${lmdz_UserChoices_CARBON_CYCLE} = control ] ; then
592            # For Control, no fossil fuel emission :
593        fCO2_ff=0
594        echo "Fossil Fuel for control run  :" ${fCO2_ff}
595    else
596            # For historical, get the fossile fuel file :
597        fCO2_ff=$( gawk "{if (match(\$0,\"${year}\ *${month}\")) {print \$3}}" ${SUBMIT_DIR}/PARAM/CMIP5_gridcar_CO2_emissions_fossil_fuel_Andres_1751-2007_monthly_SC.txt )
598        echo "Fossil Fuel for historical run  :" ${fCO2_ff}
599    fi
600   
601        # Get the value of ocean carbon flux
602    CO2MBG=$( ${SUBMIT_DIR}/COMP/lmdz_analyse_pisces_out.awk ocean.output )
603    CO2MBG=$( echo ${CO2MBG} | sed -e "s/ *//" )
604    echo "Ocean carbon flux  :" ${CO2MBG}
605   
606        # Get the value of land fluxes
607    set +A CO2SBG_3V -- $( ${SUBMIT_DIR}/COMP/lmdz_analyse_stomate_out.awk out_orchidee_0000 )
608    CO2SRF=$( echo ${CO2SBG_3V[0]} | sed -e "s/ *//" )
609    CO2LU=$( echo ${CO2SBG_3V[1]} | sed -e "s/ *//" )
610    CO2SBG=$( echo ${CO2SBG_3V[2]} | sed -e "s/ *//" )
611    echo "Land carbon flux (NEP)         :" ${CO2SRF}
612    echo "LU flux          (FLUC)        :" ${CO2LU}
613    echo "Total Land carbon flux (NBP)   :" ${CO2SBG}
614   
615        # Previous CO2
616    CO2_ppm_prec=$( echo "${PreviousLinelog[*]}" | gawk -F '|' '{gsub(" ",""); print $4}' )
617    echo "Previous CO2  :" ${CO2_ppm_prec}
618   
619        # Formula
620    CO2_ppm=$( echo "${CO2_ppm_prec} + (${fCO2_ff} + ${CO2MBG} + ${CO2SBG}) / 2.12" | bc -l )
621    echo "New CO2  :" ${CO2_ppm}
622   
623        # Save CO2 values in ExeCpuLog variable contents 5 fields
624    echo "${CumulPeriod} ${PeriodDateBegin} ${PeriodDateEnd} ${CO2_ppm} ${CO2_ppm_prec} ${fCO2_ff} ${CO2MBG} ${CO2SBG} ${CO2LU}" |   \
625        gawk '{printf("  %11d | %15s | %15s | %22.15g | %20.15g | %11.8g | %11.8g | %12.8g | %12.8g \n", \
626                           $1,$2,$3,$4,$5,$6,$7,$8,$9)}' >> ${SUBMIT_DIR}/co2.log
627   
628    IGCM_debug_PopStack "ATM_Carbon_Finalize"
629}
Note: See TracBrowser for help on using the repository browser.