source: CONFIG/UNIFORM/v6/LMDZORINCA_v6.2/EXPERIMENTS/LMDZORINCA/AER_historical/COMP/inca.card @ 4395

Last change on this file since 4395 was 4395, checked in by acosce, 5 years ago

new config directory for LMDZORINCA configuration : same than LMDZORINCA_v6 but using INCA6 instead of INCA5

File size: 5.4 KB
Line 
1#- $Id: inca.card 70 2007-06-21 14:20:42Z acosce $
2[Compatibility]
3libIGCM=1.0
4
5[UserChoices]
6# Set LDMZ_10m_winds to choose if the simulation will use online 10m wind (=y) or offline (=n)
7LMDZ_10m_winds=y
8#choose threshold (10m winds)  parameter value
9wind_parameter=0.78
10#choose seasalt correctif
11seasalt_corr=1.06
12# heat fluxes computed with feedback corresponding to 0 --> no aerosol effects, 1--> aerosol effects selected by ok_ade, ok_aie
13feedb=0
14#coupled model with ORCH
15#if yes, you need to put to CHEMISTRY_BVOC=y in orchidee.def and decomment lines for fertilizer and bbg in orchidee.card
16CoupOrchInca=n
17#active or not chemistry flux in output
18calcul_flux=n
19#choose which type of aircraft you will use (0 - 1 - 2 - 3) (no aircraft / old inca aircraft / new subsonic inca aircraft / subsonic + hypersonic inca aircraft)
20flag_plane=1
21#choose which time interpolation you want to interpolate sflx file. ( 0 - 1) (no interpolation / point to point interpolation)
22#be careful name of sflx file change with the choice of emi_interp_time ( no file / sflx_p2p.nc)
23emi_interp_time=1
24
25
26[InitialStateFiles]
27List= ()
28       
29[BoundaryFiles]
30List=(${R_IN}/CHM/IPCC_AR6/SFLX/VERS2/${RESOL_CHM}/ANT/sflx_lmdz_ANT_${year}_phy.nc,   sflx_ANT.nc         ),\
31     (${R_IN}/CHM/IPCC_AR6/SFLX/VERS2/${RESOL_CHM}/BBG/sflx_lmdz_BBG_${year}_phy.nc,   sflx_BBG.nc         ),\
32     (${R_IN}/CHM/IPCC_AR6/AIRCRAFT/${RESOL_CHM}/aircraft_${year}_phy.nc           ,   aircraft_mth.nc     ),\
33     (${R_IN}/CHM/IPCC_AR6/OXYDANTS/${RESOL_CHM}/oxydants_${year}.nc            ,   oxydants.nc         )
34
35ListNonDel= (${R_IN}/CHM/IPCC_AR6/SFLX/VERS2/${RESOL_CHM}/sflx_lmdz_GHG.nc  ,   sflx_GHG.nc     )\
36            (${R_IN}/CHM/IPCC_AR6/SFLX/VERS2/${RESOL_CHM}/sflx_lmdz_MISC.nc ,   sflx_MISC.nc    )\
37            (${R_IN}/CHM/IPCC_AR6/SFLX/VERS2/${RESOL_CHM}/sflx_lmdz_NAT.nc  ,   sflx_NAT.nc     )\
38            (${R_IN}/CHM/INCA${RESOL_CHM}/landuse.nc                        ,   landuse.nc      )\
39            (${R_IN}/CHM/INCA${RESOL_CHM}/rhvEC_v2.txt                      ,   rhvEC.txt       )\
40            (${R_IN}/CHM/INCA${RESOL_CHM}/wthEC_v2.txt                      ,   wthEC.txt       )\
41            (${R_IN}/CHM/INCA${RESOL_CHM}/clyEC_v2.txt                      ,   clyEC.txt       )\
42            (${R_IN}/CHM/INCA${RESOL_CHM}/wth_v2.dat                        ,   wth.dat         )\
43            (${R_IN}/CHM/INCA${RESOL_CHM}/cly_v2.dat                        ,   cly.dat         )\
44            (${R_IN}/CHM/INCA${RESOL_CHM}/rhv_v2.dat                        ,   rhv.dat         )\
45            (${R_IN}/CHM/INCA${RESOL_CHM}/new_phototable.dat                ,   phototable.dat  )
46
47
48[ParametersFiles]
49List=   (${SUBMIT_DIR}/PARAM/inca.def, .),\
50        (${MODIPSL}/modeles/INCA/src/INCA_XML/context_inca.xml, .)   ,\
51        (${MODIPSL}/modeles/INCA/src/INCA_XML/field_def_inca.xml, .) ,\
52        (${MODIPSL}/modeles/INCA/src/INCA_XML/file_def_inca_restart.xml, file_def_inca_restart.xml ), \
53        (${MODIPSL}/modeles/INCA/src/INCA_XML/file_def_inca_AER_daily.xml, file_def_inca_daily.xml ), \
54        (${MODIPSL}/modeles/INCA/src/INCA_XML/file_def_inca_AER_monthly.xml, file_def_inca_monthly.xml ), \
55        (${MODIPSL}/bin/inca.dat, inca.dat)
56
57[RestartFiles]
58# List restart that have to be saved/restored each loop (file out, saved, and in) :
59List= (reprecipinsoil.dat, precipinsoil.dat, precipinsoil.dat),\
60      (chem_restart.nc, chem_restart.nc, chem_start.nc)
61 
62
63
64[OutputText]
65List=(inca.out, inca.def,context_inca.xml,field_def_inca.xml,file_def_inca_daily.xml,file_def_inca_monthly.xml, inca_IDxml.out)
66
67[OutputFiles]
68List=   (inca1d_emi.nc         ,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_emi.nc        ,    NONE  ),\
69        (inca1d_species.nc     ,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_species.nc    ,    NONE  ),\
70        (inca1d_dep.nc         ,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_dep.nc        ,    NONE  ),\
71        (inca1d_aero.nc        ,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_aero.nc       ,    NONE  ),\
72        (inca1d_invariants.nc  ,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_invariants.nc ,    NONE  ),\
73        (inca1d_chem.nc        ,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_chem.nc       ,    NONE  ),\
74        (inca1d_washrate.nc    ,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_washrate.nc   ,    NONE  ),\
75        (inca1m_emi.nc         ,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_emi.nc        ,    NONE  ),\
76        (inca1m_species.nc     ,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_species.nc    ,    Post_1M_inca_species  ),\
77        (inca1m_dep.nc         ,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_dep.nc        ,    NONE  ),\
78        (inca1m_aero.nc        ,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_aero.nc       ,    Post_1M_inca_aero  ),\
79        (inca1m_invariants.nc  ,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_invariants.nc ,    NONE  ),\
80        (inca1m_chem.nc        ,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_chem.nc       ,    NONE  ),\
81        (inca1m_washrate.nc    ,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_washrate.nc   ,    NONE  ),\
82        (aerosols_from_inca.nc   ,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_aerosols_from_inca.nc,    NONE  )
83
84[Post_1M_inca_aero]
85Patches= ()
86GatherWithInternal = (lon, lat, presnivs, time_centered, time_centered_bounds, time_counter, area)
87TimeSeriesVars2D = (loaddustci, loadno3ci, loadbcai, loadoaai, loadsscs, loadso4cs, loadno3cs, loadssas, loadbcas, loadoaas, loadso4as, loadnh4as, loadno3as, loadssss)
88ChunckJob2D = NONE
89TimeSeriesVars3D = ()
90ChunckJob3D = NONE
91Seasonal=OFF
92
93[Post_1M_inca_species]
94Patches= ()
95GatherWithInternal = (lon, lat, presnivs, time_centered, time_centered_bounds,time_counter, area)
96TimeSeriesVars2D = ()
97ChunckJob2D = NONE
98TimeSeriesVars3D = (mmrso4cs, mmrso4as, mmrdms, mmrssss, mmrbcai, mmrdustci, mmrbcas)
99ChunckJob3D = NONE
100Seasonal=OFF
101
102
Note: See TracBrowser for help on using the repository browser.