| 1 | #- $Id: inca.card 70 2007-06-21 14:20:42Z acosce $ |
|---|
| 2 | [Compatibility] |
|---|
| 3 | libIGCM=1.0 |
|---|
| 4 | |
|---|
| 5 | [UserChoices] |
|---|
| 6 | # Set LMDZ_10m_winds to choose if the simulation will use online 10m wind (=y) or offline (=n) |
|---|
| 7 | LMDZ_10m_winds=y |
|---|
| 8 | # heat fluxes computed with feedback corresponding to 0 --> no aerosol effects, 1--> aerosol effects selected by ok_ade, ok_aie |
|---|
| 9 | feedb=0 |
|---|
| 10 | #coupled model with ORCH |
|---|
| 11 | #if yes, you need to put to CHEMISTRY_BVOC=y in orchidee.def and decomment lines for fertilizer and bbg in orchidee.card |
|---|
| 12 | CoupOrchInca=n |
|---|
| 13 | #active or not chemistry flux in output |
|---|
| 14 | calcul_flux=y |
|---|
| 15 | #choose which type of aircraft you will use (0 - 1 - 2 - 3) (no aircraft / old inca aircraft / new subsonic inca aircraft / subsonic + hypersonic inca aircraft) |
|---|
| 16 | flag_plane=1 |
|---|
| 17 | #choose which time interpolation you want to interpolate sflx file. ( 0 - 1) (no interpolation / point to point interpolation) |
|---|
| 18 | #be careful name of sflx file change with the choice of emi_interp_time ( no file / sflx_p2p.nc) |
|---|
| 19 | emi_interp_time=1 |
|---|
| 20 | |
|---|
| 21 | [InitialStateFiles] |
|---|
| 22 | List= () |
|---|
| 23 | |
|---|
| 24 | [BoundaryFiles] |
|---|
| 25 | List=(${R_IN}/CHM/IPCC_AR6/SFLX/VERS2/${RESOL_CHM}/ANT/sflx_lmdz_ANT_${year}_phy.nc, sflx_ANT.nc ),\ |
|---|
| 26 | (${R_IN}/CHM/IPCC_AR6/SFLX/VERS2/${RESOL_CHM}/BBG/sflx_lmdz_BBG_${year}_phy.nc, sflx_BBG.nc ),\ |
|---|
| 27 | (${R_IN}/CHM/IPCC_AR6/AIRCRAFT/${RESOL_CHM}/aircraft_${year}_phy.nc , aircraft_mth.nc ) |
|---|
| 28 | |
|---|
| 29 | ListNonDel= (${R_IN}/CHM/INCA${RESOL_CHM}/npp.nc , npp.nc )\ |
|---|
| 30 | (${R_IN}/CHM/INCA${RESOL_CHM}/o3clim.nc , o3clim.nc )\ |
|---|
| 31 | (${R_IN}/CHM/INCA${RESOL_CHM}/so4.nc , so4.nc )\ |
|---|
| 32 | (${R_IN}/CHM/IPCC_AR6/SFLX/VERS2/${RESOL_CHM}/sflx_lmdz_GHG.nc , sflx_GHG.nc )\ |
|---|
| 33 | (${R_IN}/CHM/IPCC_AR6/SFLX/VERS2/${RESOL_CHM}/sflx_lmdz_MISC.nc , sflx_MISC.nc )\ |
|---|
| 34 | (${R_IN}/CHM/IPCC_AR6/SFLX/VERS2/${RESOL_CHM}/sflx_lmdz_NAT.nc , sflx_NAT.nc )\ |
|---|
| 35 | (${R_IN}/CHM/INCA${RESOL_CHM}/landuse.nc , landuse.nc )\ |
|---|
| 36 | (${R_IN}/CHM/INCA${RESOL_CHM}/rhvEC.txt , rhvEC.txt )\ |
|---|
| 37 | (${R_IN}/CHM/INCA${RESOL_CHM}/wthEC.txt , wthEC.txt )\ |
|---|
| 38 | (${R_IN}/CHM/INCA${RESOL_CHM}/clyEC.txt , clyEC.txt )\ |
|---|
| 39 | (${R_IN}/CHM/INCA${RESOL_CHM}/wth.dat , wth.dat )\ |
|---|
| 40 | (${R_IN}/CHM/INCA${RESOL_CHM}/cly.dat , cly.dat )\ |
|---|
| 41 | (${R_IN}/CHM/INCA${RESOL_CHM}/rhv.dat , rhv.dat )\ |
|---|
| 42 | (${R_IN}/CHM/INCA${RESOL_CHM}/new_phototable.dat , phototable.dat ) |
|---|
| 43 | |
|---|
| 44 | |
|---|
| 45 | |
|---|
| 46 | [ParametersFiles] |
|---|
| 47 | List= (${SUBMIT_DIR}/PARAM/inca.def, .),\ |
|---|
| 48 | (${MODIPSL}/modeles/INCA/src/INCA_XML/context_inca.xml, .) ,\ |
|---|
| 49 | (${MODIPSL}/modeles/INCA/src/INCA_XML/field_def_inca.xml, .) ,\ |
|---|
| 50 | (${MODIPSL}/modeles/INCA/src/INCA_XML/file_def_inca_NMHC_daily.xml, file_def_inca_daily.xml), \ |
|---|
| 51 | (${MODIPSL}/modeles/INCA/src/INCA_XML/file_def_inca_restart.xml, file_def_inca_restart.xml ), \ |
|---|
| 52 | (${MODIPSL}/modeles/INCA/src/INCA_XML/file_def_inca_NMHC_monthly.xml, file_def_inca_monthly.xml), \ |
|---|
| 53 | (${MODIPSL}/bin/inca.dat, inca.dat) |
|---|
| 54 | |
|---|
| 55 | [RestartFiles] |
|---|
| 56 | # List restart that have to be saved/restored each loop (file out, saved, and in) : |
|---|
| 57 | List= (chem_restart.nc, chem_restart.nc, chem_start.nc) |
|---|
| 58 | |
|---|
| 59 | |
|---|
| 60 | [OutputText] |
|---|
| 61 | List=(inca.out, inca.def,context_inca.xml,field_def_inca.xml,file_def_inca_daily.xml,file_def_inca_monthly.xml, inca_IDxml.out) |
|---|
| 62 | |
|---|
| 63 | [OutputFiles] |
|---|
| 64 | List= (inca1d_emi.nc , ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_emi.nc , NONE ),\ |
|---|
| 65 | (inca1d_species.nc , ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_species.nc , Post_1D_inca_species ),\ |
|---|
| 66 | (inca1d_dep.nc , ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_dep.nc , NONE ),\ |
|---|
| 67 | (inca1d_chem.nc , ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_chem.nc , Post_1D_inca_chem ),\ |
|---|
| 68 | (inca1d_reacflux.nc, ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_reacflux.nc, NONE ),\ |
|---|
| 69 | (inca1d_washrate.nc, ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_washrate.nc, NONE ),\ |
|---|
| 70 | (inca1m_emi.nc , ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_emi.nc , NONE ),\ |
|---|
| 71 | (inca1m_species.nc , ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_species.nc , NONE ),\ |
|---|
| 72 | (inca1m_dep.nc , ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_dep.nc , NONE ),\ |
|---|
| 73 | (inca1m_chem.nc , ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_chem.nc , NONE ),\ |
|---|
| 74 | (inca1m_reacflux.nc, ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_reacflux.nc, NONE ),\ |
|---|
| 75 | (inca1m_washrate.nc, ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_washrate.nc, NONE ) |
|---|
| 76 | |
|---|
| 77 | |
|---|
| 78 | |
|---|
| 79 | [Post_1D_inca_species] |
|---|
| 80 | Patches= () |
|---|
| 81 | GatherWithInternal = (lon, lat, presnivs, time_centered, time_centered_bounds,time_counter, area) |
|---|
| 82 | TimeSeriesVars2D = () |
|---|
| 83 | ChunckJob2D = NONE |
|---|
| 84 | TimeSeriesVars3D = (vmrno,vmrno2,vmro3,vmrch4,vmrco,vmrno3, vmrhno3) |
|---|
| 85 | ChunckJob3D = NONE |
|---|
| 86 | Seasonal=OFF |
|---|
| 87 | |
|---|
| 88 | |
|---|
| 89 | [Post_1D_inca_chem] |
|---|
| 90 | Patches= () |
|---|
| 91 | GatherWithInternal = (lon, lat, presnivs,time_centered, time_centered_bounds, time_counter, area) |
|---|
| 92 | TimeSeriesVars2D = (colo3, colco, colno2, colch2o, colch4, colhno2, coloh, colso2) |
|---|
| 93 | ChunckJob2D = NONE |
|---|
| 94 | TimeSeriesVars3D = () |
|---|
| 95 | ChunckJob3D = NONE |
|---|
| 96 | Seasonal=OFF |
|---|
| 97 | |
|---|
