source: CONFIG/UNIFORM/v6/LMDZORINCA_v6/EXPERIMENTS/LMDZORINCA/NMHC_AER/COMP/inca.card @ 4200

Last change on this file since 4200 was 4200, checked in by acosce, 5 years ago

remove restart files from inca.card
we choose to start the model by default without any start file.

File size: 7.6 KB
Line 
1#- $Id: inca.card 70 2007-06-21 14:20:42Z acosce $
2[Compatibility]
3libIGCM=1.0
4
5[UserChoices]
6# Set LMDZ_10m_winds to choose if the simulation will use online 10m wind (=y) or offline (=n)
7LMDZ_10m_winds=y
8# Set 10m_Winds_method to choose which way we will use to work with 10m wind from gcm (so if LMDZ_10m_winds=y)
9#10m_winds_method=weibull10 --> use weibull method for 10m wind from gcm,
10#10m_winds_method=threshold --> use threshold method for 10m wind from gcm
1110m_winds_method=threshold
12#choose threshold or weibull10 parameter value
13wind_parameter=0.85
14# heat fluxes computed with feedback corresponding to 0 --> no aerosol effects, 1--> aerosol effects selected by ok_ade, ok_aie
15feedb=0
16#choose sedimentation multilayer or one layer
17multilayer_sedim=y
18#coupled model with ORCH
19#if yes, you need to put to CHEMISTRY_BVOC=y in orchidee.def and decomment lines for fertilizer and bbg in orchidee.card
20CoupOrchInca=n
21#active or not chemistry flux in output
22calcul_flux=n
23#choose which type of aircraft you will use (0 - 1 - 2 - 3) (no aircraft / old inca aircraft / new subsonic inca aircraft / subsonic + hypersonic inca aircraft)
24flag_plane=1
25#choose which time interpolation you want to interpolate sflx file. ( 0 - 1 - 2) (no interpolation / point to point interpolation / Sheng & Zwiers interpolation)
26#be careful name of sflx file change with the choice of emi_interp_time ( no file / sflx_p2p.nc / sflx_SZ.nc )
27emi_interp_time=1
28
29# Use XIOS and/or IOIPSL as output library
30XIOS=y
31IOIPSL=n
32
33[InitialStateFiles]
34List= ()
35
36       
37[BoundaryFiles]
38#List=      (/ccc/work/cont003/subipsl/subipsl/ECMWF320x160/AN${year}/165_${year}${month}.nc      , u10mec.nc)\
39#           (/ccc/work/cont003/subipsl/subipsl/ECMWF320x160/AN${year}/166_${year}${month}.nc      , v10mec.nc)\
40#           (${R_IN}/ATM/${RESOL_ATM}/NUDGE_FILES/ERAI/AN${year}/u10m_ecmwf_${year}${month}.nc , u10m.nc  )\
41#           (${R_IN}/ATM/${RESOL_ATM}/NUDGE_FILES/ERAI/AN${year}/v10m_ecmwf_${year}${month}.nc , v10m.nc  )
42List=()
43
44ListNonDel= (${R_IN}/CHM/INCA${RESOL_CHM}/npp.nc                ,   npp.nc              )\
45            (${R_IN}/CHM/INCA${RESOL_CHM}/o3clim.nc             ,   o3clim.nc           )\
46            (${R_IN}/CHM/INCA${RESOL_CHM}/so4.nc                ,   so4.nc              )\
47            (${R_IN}/CHM/INCA${RESOL_CHM}/aircraft.nc           ,   aircraft_mth.nc     )\
48            (${R_IN}/CHM/INCA${RESOL_CHM}/sflx_nitrate.nc       ,   sflx_p2p.nc         )\
49            (${R_IN}/CHM/INCA${RESOL_CHM}/landuse.nc            ,   landuse.nc          )\
50            (${R_IN}/CHM/INCA${RESOL_CHM}/rhvEC.txt             ,   rhvEC.txt           )\
51            (${R_IN}/CHM/INCA${RESOL_CHM}/wthEC.txt             ,   wthEC.txt           )\
52            (${R_IN}/CHM/INCA${RESOL_CHM}/clyEC.txt             ,   clyEC.txt           )\
53            (${R_IN}/CHM/INCA${RESOL_CHM}/wth.dat               ,   wth.dat             )\
54            (${R_IN}/CHM/INCA${RESOL_CHM}/cly.dat               ,   cly.dat             )\
55            (${R_IN}/CHM/INCA${RESOL_CHM}/rhv.dat               ,   rhv.dat             )\
56            (${R_IN}/CHM/INCA${RESOL_CHM}/new_phototable.dat    ,   phototable.dat      )
57
58
59[ParametersFiles]
60List=   (${SUBMIT_DIR}/PARAM/inca.def, .),\
61        (${MODIPSL}/modeles/INCA/src/INCA_XML/context_inca.xml, .)   ,\
62        (${MODIPSL}/modeles/INCA/src/INCA_XML/field_def_inca.xml, .) ,\
63        (${MODIPSL}/modeles/INCA/src/INCA_XML/file_def_inca_restart.xml, file_def_inca_restart.xml ), \
64        (${MODIPSL}/modeles/INCA/src/INCA_XML/file_def_inca_NMHC_AER_daily.xml, file_def_inca_daily.xml), \
65        (${MODIPSL}/modeles/INCA/src/INCA_XML/file_def_inca_NMHC_AER_monthly.xml, file_def_inca_monthly.xml), \
66        (${MODIPSL}/bin/inca.dat, .)
67
68[RestartFiles]
69# List restart that have to be saved/restored each loop (file out, saved, and in) :
70List= (reprecipinsoil.dat, precipinsoil.dat, precipinsoil.dat),\
71      (chem_restart.nc, chem_restart.nc, chem_start.nc)
72
73
74[OutputText]
75List=(inca.out, inca.def,context_inca.xml,field_def_inca.xml,file_def_inca_daily.xml,file_def_inca_monthly.xml, inca_IDxml.out)
76
77[OutputFiles]
78List=   (inca1d_emi.nc          ,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_emi.nc        ,  NONE                  ),\
79        (inca1d_species.nc      ,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_species.nc    ,  Post_1D_inca_species  ),\
80        (inca1d_dep.nc          ,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_dep.nc        ,  NONE                  ),\
81        (inca1d_chem.nc         ,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_chem.nc       ,  Post_1D_inca_chem     ),\
82        (inca1d_aero.nc         ,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_aero.nc       ,  Post_1D_inca_aero     ),\
83        (inca1d_phtrate.nc      ,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_phtrate.nc    ,  NONE                  ),\
84        (inca1d_reacflux.nc     ,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_reacflux.nc   ,  NONE                  ),\
85        (inca1d_washrate.nc     ,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_washrate.nc   ,  NONE                  ),\
86        (inca1d_forcage.nc      ,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_forcage.nc    ,  Post_1D_inca_forcage  ),\
87        (inca1d_veget.nc        ,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_veget.nc      ,  Post_1D_inca_veget    ),\
88        (inca1m_emi.nc          ,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_emi.nc        ,  NONE                  ),\
89        (inca1m_species.nc      ,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_species.nc    ,  NONE                  ),\
90        (inca1m_dep.nc          ,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_dep.nc        ,  NONE                  ),\
91        (inca1m_chem.nc         ,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_chem.nc       ,  NONE                  ),\
92        (inca1m_aero.nc         ,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_aero.nc       ,  NONE                  ),\
93        (inca1m_phtrate.nc      ,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_phtrate.nc    ,  NONE                  ),\
94        (inca1m_reacflux.nc     ,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_reacflux.nc   ,  NONE                  ),\
95        (inca1m_washrate.nc     ,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_washrate.nc   ,  NONE                  ),\
96        (inca1m_forcage.nc      ,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_forcage.nc    ,  NONE                  ),\
97        (inca1m_veget.nc        ,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_veget.nc      ,  NONE                  ),\
98        (aerosols_from_inca.nc  ,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_aerosols_from_inca.nc,  NONE                        ),\
99        (inca_oxydants.nc       ,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_oxydants.nc   ,  NONE                  )
100
101
102
103[Post_1D_inca_aero]
104Patches= ()
105GatherWithInternal = (lon, lat, presnivs, time_centered, time_centered_bounds, time_counter, area)
106TimeSeriesVars2D = (od550bcas,od550oaas,od550so4as, od550so4cs, od550ssas,od550ssss, od550sscs,od550dustci,od550bcai,od550oaai, loaddustci, loadno3ci, loadbcai, loadoaai, loadsscs, loadso4cs, loadno3cs, loadssas, loadbcas, loadoaas, loadso4as, loadnh4as, loadno3as, loadssss)
107ChunckJob2D = NONE
108TimeSeriesVars3D = ()
109ChunckJob3D = NONE
110Seasonal=OFF
111
112[Post_1D_inca_species]
113Patches= ()
114GatherWithInternal = (lon, lat, presnivs, time_centered, time_centered_bounds,time_counter, area)
115TimeSeriesVars2D = ()
116ChunckJob2D = NONE
117TimeSeriesVars3D = (vmrno,vmrno2,vmro3,vmrch4,vmrco,,mmrso4cs, mmrso4as, mmrdms, mmrssss, vmrno3, vmrhno3, mmrbcai, mmrdustci)
118ChunckJob3D = NONE
119Seasonal=OFF
120
121
122[Post_1D_inca_chem]
123Patches= ()
124GatherWithInternal = (lon, lat, presnivs,time_centered, time_centered_bounds, time_counter, area)
125TimeSeriesVars2D = (colo3, colco, colno2, colch2o, colch4, colhno2, coloh, colso2)
126ChunckJob2D = NONE
127TimeSeriesVars3D = ()
128ChunckJob3D = NONE
129Seasonal=OFF
130
131[Post_1D_inca_forcage]
132Patches= ()
133GatherWithInternal = (lon, lat, presnivs, time_centered, time_centered_bounds,time_counter, area)
134TimeSeriesVars2D = (SWTOAAS_ANT, SWTOAAS_AER, SWTOAAS_NAT, SWTOAAS_BC, SWTOAAS_SO4, SWTOAAS_POM, SWTOAAS_DUST, SWTOAAS_SS, SWTOAAS_DNO3, SWTOASS_SNO3,  SWTOAAS_FNO3)
135ChunckJob2D = NONE
136TimeSeriesVars3D = ()
137ChunckJob3D = NONE
138Seasonal=OFF
139
140[Post_1D_inca_veget]
141Patches= ()
142GatherWithInternal = (lon, lat, veget, time_counter)
143TimeSeriesVars2D = (hdry,snowfromOrch,emi_isop,emi_mono)
144ChunckJob2D = NONE
145TimeSeriesVars3D = (flx_iso,flx_mono,flx_ORVOC,flx_acetal)
146ChunckJob3D = NONE
147Seasonal=OFF
Note: See TracBrowser for help on using the repository browser.