source: CONFIG/UNIFORM/v6/LMDZOR_v6/GENERAL/DRIVER/lmdz.driver @ 4020

Last change on this file since 4020 was 4020, checked in by jgipsl, 2 years ago

Updated as done in IPSLCM6

File size: 27.4 KB
Line 
1#!/bin/ksh
2#-----------------------------------------------------------------
3function ATM_Initialize
4{
5    IGCM_debug_PushStack "ATM_Initialize"
6
7    RESOL_ATM=$( echo $RESOL | awk "-Fx" '{print $2}' | awk "-F-" '{print $1}')
8
9    [ -f ${SUBMIT_DIR}/../.resol ] && eval $(grep RESOL_ATM_3D ${SUBMIT_DIR}/../.resol) || RESOL_ATM_3D=96x95x39
10
11    RESOL_ATM_Z=$( echo ${RESOL_ATM_3D} | awk "-Fx" '{print $3}' )
12    RESOL_ATM_X=$( echo ${RESOL_ATM_3D} | awk "-Fx" '{print $1}' )
13    RESOL_ATM_Y=$( echo ${RESOL_ATM_3D} | awk "-Fx" '{print $2}' )
14    RESOL_ATM_XY="${RESOL_ATM_X}x${RESOL_ATM_Y}"
15
16    ##- LMDZ physics version
17    ##  Read LMDZ_Physics option in lmdz.card, if not present take default value AP (old physics)
18    if [ ! X${lmdz_UserChoices_LMDZ_Physics} = X ] ; then
19        LMDZ_Physics=${lmdz_UserChoices_LMDZ_Physics}
20    else
21        LMDZ_Physics=AP
22    fi
23    echo LMDZ physics version : ${LMDZ_Physics}
24
25    ##- Create_etat0_limit version
26    ##  Define variable CREATE only if it is set in lmdz.card section UserChoices.
27    ##  This variable is only used in lmdz.card to choose input files.
28    if [ ! X${lmdz_UserChoices_CREATE} = X ] ; then
29        IGCM_card_DefineVariableFromOption ${SUBMIT_DIR}/COMP/lmdz.card UserChoices CREATE
30        CREATE=${lmdz_UserChoices_CREATE}
31        echo create_etat0_limit version : ${CREATE}
32    fi
33
34
35    ## - LMDZ choice of config.def file
36    ##   ConfType must be set in lmdz.card
37    ConfType=${lmdz_UserChoices_ConfType}
38
39    ##- LMDZ output level, to be set in lmdz.card
40    if [ X${lmdz_UserChoices_OutLevel} = X ] ; then
41        # OutLevel is not set. Take default value low.
42        OutLevel=low
43    else
44        OutLevel=${lmdz_UserChoices_OutLevel}
45    fi
46
47    ##-- Output frequency purpose ....
48    ##--  Initialisation  ....
49    ok_mensuel=.FALSE.
50    ok_journe=.FALSE.
51    ok_hf=.FALSE.
52    ok_hf3h=.FALSE.
53    ok_hf3hm=.FALSE.
54    ok_stn=.FALSE.
55
56
57    case ${config_UserChoices_PeriodLength} in
58        1Y|1y|1M|1m) ok_mensuel=.TRUE. ;;
59        5D|5d|1D|1d) ok_journe=.TRUE. ;;
60    esac
61
62    for frequency in ${config_ATM_WriteFrequency} ; do
63        case ${frequency} in
64            1M|1m) ok_mensuel=.TRUE. ;;
65        esac
66        case ${frequency} in
67            5D|5d|1D|1d) ok_journe=.TRUE. ;;
68        esac
69        case ${frequency} in
70            HF|hf) ok_hf=.TRUE. ;;
71        esac
72        case ${frequency} in
73            HF3h|hf3h) ok_hf3h=.TRUE. ;;
74        esac
75        case ${frequency} in
76            HF3hm|hf3hm) ok_hf3hm=.TRUE. ;;
77        esac
78        case ${frequency} in
79            STN|stn) ok_stn=.TRUE. ;;
80        esac
81    done
82
83
84##  Read LMDZ_COSP_OK in lmdz.card
85    if [ X${lmdz_UserChoices_LMDZ_COSP_OK} = Xy ] ; then
86        ##  LMDZ_COSP_OK=y, now read all other COSP variables
87        ##  Read LMDZ_COSP_monthly in lmdz.card
88        if [ X${lmdz_UserChoices_LMDZ_COSP_monthly} = Xy ] ; then
89            LMDZ_COSP_monthly=.TRUE.
90        else
91            LMDZ_COSP_monthly=.FALSE.
92        fi
93        ##  Read LMDZ_COSP_daily in lmdz.card
94        if [ X${lmdz_UserChoices_LMDZ_COSP_daily} = Xy ] ; then
95            LMDZ_COSP_daily=.TRUE.
96        else
97            LMDZ_COSP_daily=.FALSE.
98        fi
99        ##  Read LMDZ_COSP_hf in lmdz.card
100        if [ X${lmdz_UserChoices_LMDZ_COSP_hf} = Xy ] ; then
101            LMDZ_COSP_hf=.TRUE.
102        else
103            LMDZ_COSP_hf=.FALSE.
104        fi
105    else
106        # LMDZ_COSP_OK=n : All cosp output are deactivated
107        LMDZ_COSP_monthly=.FALSE.
108        LMDZ_COSP_daily=.FALSE.
109        LMDZ_COSP_hf=.FALSE.
110    fi 
111
112    ##  Read LMDZ_NMC_monthly in lmdz.card
113    if [ X${lmdz_UserChoices_LMDZ_NMC_monthly} = Xy ] ; then
114        LMDZ_NMC_monthly=.TRUE.
115    else
116        LMDZ_NMC_monthly=.FALSE.
117    fi
118   
119    ## Read LMDZ_NMC_daily in lmdz.card
120    if [ X${lmdz_UserChoices_LMDZ_NMC_daily} = Xy ] ; then
121        LMDZ_NMC_daily=.TRUE.
122    else
123        LMDZ_NMC_daily=.FALSE.
124    fi
125   
126    ## Read LMDZ_NMC_hf in lmdz.card
127    if [ X${lmdz_UserChoices_LMDZ_NMC_hf} = Xy ] ; then
128        LMDZ_NMC_hf=.TRUE.
129    else
130        LMDZ_NMC_hf=.FALSE.
131    fi
132   
133
134    IGCM_debug_PopStack "ATM_Initialize"
135}
136
137#-----------------------------------------------------------------
138function ATM_Update
139{
140    IGCM_debug_PushStack "ATM_Update"
141
142    ##-- GHG forcing :
143    ##   If forcing file exist in run directory, read values for the current year
144    ##   and set in config.def. If not use the default value set in config.def
145
146    # Read value for solaire from file SOLARANDVOLCANOES.txt. If file not existing, take DEFAULT value from file.
147    IGCM_debug_Print 1 "Note that the solaire parameter is here below changed but it is only used by LMDZ for old physics(AP and NPv3.2)"
148    IGCM_debug_Print 1 "For newer physics with iflag_rrtm=1 and ok_suntime_rrtm=y, the solar constant is instead taken from solarforcing.nc file"
149    if [ -f SOLARANDVOLCANOES.txt ] ; then
150        value=`grep Annee_${year} SOLARANDVOLCANOES.txt | awk -F= '{print $2}'`
151        if [ X"${value}" = X ] ; then
152            # The grep returned empty variable, stop execution
153            IGCM_debug_Exit "The file SOLARANDVOLCANOES.txt do not contain the current year."
154            IGCM_debug_Verif_Exit
155        fi
156    else
157        value=DEFAULT
158    fi
159    IGCM_comp_modifyDefFile nonblocker config.def solaire $value
160
161    # Read value for eccentricity from file Eccentricity.txt. If file not existing, take DEFAULT value from file.
162    if [ -f Eccentricity.txt ] ; then
163        value=`grep Annee_${year} Eccentricity.txt | awk -F= '{print $2}'`
164        if [ X"${value}" = X ] ; then
165            # The grep returned empty variable, stop execution
166            IGCM_debug_Exit "The file Eccentricity.txt do not contain the current year."
167            IGCM_debug_Verif_Exit
168        fi
169    else
170        value=DEFAULT
171    fi
172    IGCM_comp_modifyDefFile nonblocker config.def R_ecc $value
173
174    # Read value for obliquity from file Obliquity.txt. If file not existing, take DEFAULT value from file.
175    if [ -f Obliquity.txt ] ; then
176        value=`grep Annee_${year} Obliquity.txt | awk -F= '{print $2}'`
177        if [ X"${value}" = X ] ; then
178            # The grep returned empty variable, stop execution
179            IGCM_debug_Exit "The file Obliquity.txt do not contain the current year."
180            IGCM_debug_Verif_Exit
181        fi
182    else
183        value=DEFAULT
184    fi
185    IGCM_comp_modifyDefFile nonblocker config.def R_incl $value
186
187    # Read value for perihelie from file Perihelie.txt. If file not existing, take DEFAULT value from file.
188    if [ -f Perihelie.txt ] ; then
189        value=`grep Annee_${year} Perihelie.txt | awk -F= '{print $2}'`
190        if [ X"${value}" = X ] ; then
191            # The grep returned empty variable, stop execution
192            IGCM_debug_Exit "The file Perihelie.txt do not contain the current year."
193            IGCM_debug_Verif_Exit
194        fi
195    else
196        value=DEFAULT
197    fi
198    IGCM_comp_modifyDefFile nonblocker config.def R_peri $value
199
200    # Read value for co2_ppm from file CO2.txt. If file not existing, take DEFAULT value from file.
201    # Calculate co2_ppm_per as co2_ppm*4.
202    if [ -f CO2.txt ] ; then
203        value=`grep Annee_${year} CO2.txt | awk -F= '{print $2}'`
204        if [ X"${value}" = X ] ; then
205            # The grep returned empty variable, stop execution
206            IGCM_debug_Exit "The file CO2.txt do not contain the current year."
207            IGCM_debug_Verif_Exit
208        fi
209        value4=`grep Annee_${year} CO2.txt | awk -F= '{print $2 * 4}'`
210    else
211        value=DEFAULT
212        value4=DEFAULT
213    fi
214    IGCM_comp_modifyDefFile nonblocker config.def co2_ppm $value
215    IGCM_comp_modifyDefFile nonblocker config.def co2_ppm_per $value4
216
217
218    # Read value for CH4_ppb from file CH4.txt. If file not existing, take DEFAULT value from file.
219    if [ -f CH4.txt ] ; then
220        value=`grep Annee_${year} CH4.txt | awk -F= '{print $2}'`
221        if [ X"${value}" = X ] ; then
222            # The grep returned empty variable, stop execution
223            IGCM_debug_Exit "The file CH4.txt do not contain the current year."
224            IGCM_debug_Verif_Exit
225        fi
226    else
227        value=DEFAULT
228    fi
229    IGCM_comp_modifyDefFile nonblocker config.def CH4_ppb $value
230
231
232    # Read value for N2O_ppb from file N2O.txt. If file not existing, take DEFAULT value from file.
233    if [ -f N2O.txt ] ; then
234        value=`grep Annee_${year} N2O.txt | awk -F= '{print $2}'`
235        if [ X"${value}" = X ] ; then
236            # The grep returned empty variable, stop execution
237            IGCM_debug_Exit "The file N2O.txt do not contain the current year."
238            IGCM_debug_Verif_Exit
239        fi
240    else
241        value=DEFAULT
242    fi
243    IGCM_comp_modifyDefFile nonblocker config.def N2O_ppb $value
244
245    # Read value for CFC11_ppt from file CFC11.txt. If file not existing, take DEFAULT value from file.
246    if [ -f CFC11.txt ] ; then
247        value=`grep Annee_${year} CFC11.txt | awk -F= '{print $2}'`
248        if [ X"${value}" = X ] ; then
249            # The grep returned empty variable, stop execution
250            IGCM_debug_Exit "The file CFC11.txt do not contain the current year."
251            IGCM_debug_Verif_Exit
252        fi
253    else
254        value=DEFAULT
255    fi
256    IGCM_comp_modifyDefFile nonblocker config.def CFC11_ppt $value
257
258
259    # Read value for CFC12_ppt from file CFC12.txt. If file not existing, take DEFAULT value from file.
260    if [ -f CFC12.txt ] ; then
261        value=`grep Annee_${year} CFC12.txt | awk -F= '{print $2}'`
262        if [ X"${value}" = X ] ; then
263            # The grep returned empty variable, stop execution
264            IGCM_debug_Exit "The file CFC12.txt do not contain the current year."
265            IGCM_debug_Verif_Exit
266        fi
267    else
268        value=DEFAULT
269    fi
270    IGCM_comp_modifyDefFile nonblocker config.def CFC12_ppt $value
271
272
273    ## Coupling Time Step : Take value of FreqCoupling set in oasis.card or if it is not set, take default value 86400
274    LMDZ_t_coupl=${oasis_UserChoices_FreqCoupling:-86400}
275    IGCM_debug_Print 3 "LMDZ_t_coupl "   ${LMDZ_t_coupl}
276    IGCM_comp_modifyDefFile nonblocker config.def t_coupl   ${LMDZ_t_coupl} 
277
278    ##-- Add special treatement for CARBON CYCLE
279    if [ X"${lmdz_UserChoices_CARBON_CYCLE}" = X"control" ] || [ X"${lmdz_UserChoices_CARBON_CYCLE}" = X"historical" ] ; then
280        ATM_Carbon_Update
281    fi
282
283
284    ##-- Set LMDZ_COSP_daily1979=y in section UserChoices in lmdz.card to activate
285    ##   COSP daily output for years 1979 and later (mandatory for historical CMIP5 run).
286    if ([ X"${lmdz_UserChoices_LMDZ_COSP_daily1979}" = X"y" ] &&  [ ${year} -ge 1979 ]) ; then
287        LMDZ_COSP_daily=.TRUE.
288    fi
289
290    ## Modifiy
291    IGCM_comp_modifyXmlFile nonblocker file_def_histmth_lmdz.xml histmth enabled ${ok_mensuel}
292   
293    IGCM_comp_modifyXmlFile nonblocker file_def_histday_lmdz.xml histday enabled ${ok_journe}
294   
295    if [ X${OutLevel} = Xlow ] || [ X${OutLevel} = Xmedium ] ; then
296        IGCM_comp_modifyXmlFile nonblocker file_def_histday_lmdz.xml histday output_level 2
297    else
298        IGCM_comp_modifyXmlFile nonblocker file_def_histday_lmdz.xml histday output_level 5
299    fi
300   
301    IGCM_comp_modifyXmlFile nonblocker file_def_histhf_lmdz.xml histhf enabled ${ok_hf}
302   
303    if [ X${OutLevel} = Xlow ] ; then
304        IGCM_comp_modifyXmlFile nonblocker file_def_histhf_lmdz.xml histhf output_level 5
305    elif [ X${OutLevel} = Xmedium ] ; then
306        IGCM_comp_modifyXmlFile nonblocker file_def_histhf_lmdz.xml histhf output_level 6
307    elif [ X${OutLevel} = Xhigh ] ; then
308        IGCM_comp_modifyXmlFile nonblocker file_def_histhf_lmdz.xml histhf output_level 7
309    fi
310       
311    IGCM_comp_modifyXmlFile nonblocker file_def_histhf3h_lmdz.xml histhf3h enabled ${ok_hf3h}
312    IGCM_comp_modifyXmlFile nonblocker file_def_histhf3hm_lmdz.xml histhf3hm enabled ${ok_hf3hm}
313
314    IGCM_comp_modifyXmlFile nonblocker file_def_histstn_lmdz.xml histstn enabled ${ok_stn}
315
316    IGCM_comp_modifyXmlFile nonblocker file_def_histmthNMC_lmdz.xml histmthNMC enabled ${LMDZ_NMC_monthly}
317    IGCM_comp_modifyXmlFile nonblocker file_def_histdayNMC_lmdz.xml histdayNMC enabled ${LMDZ_NMC_daily}
318    IGCM_comp_modifyXmlFile nonblocker file_def_histhfNMC_lmdz.xml histhfNMC enabled ${LMDZ_NMC_hf}
319   
320    IGCM_comp_modifyXmlFile nonblocker file_def_histmthCOSP_lmdz.xml histmthCOSP enabled ${LMDZ_COSP_monthly}
321    IGCM_comp_modifyXmlFile nonblocker file_def_histdayCOSP_lmdz.xml histdayCOSP enabled ${LMDZ_COSP_daily}
322    IGCM_comp_modifyXmlFile nonblocker file_def_histhfCOSP_lmdz.xml histhfCOSP enabled ${LMDZ_COSP_hf}
323
324    # Activate the histstrataer output file only for configuration with interactive stratospheric aersols
325    # done by setting the key word LMDZ_strataero=y in lmdz.card
326    if [ X${lmdz_UserChoices_LMDZ_strataero} = Xy ] ; then
327        IGCM_comp_modifyXmlFile nonblocker file_def_histstrataer_lmdz.xml histstrataer enabled .TRUE.
328    else
329        IGCM_comp_modifyXmlFile nonblocker file_def_histstrataer_lmdz.xml histstrataer enabled .FALSE.
330    fi
331
332
333    ## run.def parameters
334
335
336    ##-- Remise ou non a zero de la date initiale de LMDZ pour le fichier run.def
337    if [ ${CumulPeriod} -eq 1 ] ; then
338        IGCM_comp_modifyDefFile blocker run.def raz_date  1
339    else
340        IGCM_comp_modifyDefFile blocker run.def raz_date  0
341    fi
342
343    ##-- Calendar type for LMDZ and create_etat0_limit
344    case ${config_UserChoices_CalendarType} in
345        leap|gregorian)
346            IGCM_comp_modifyDefFile blocker run.def calend  gregorian ;;
347        noleap)
348            IGCM_comp_modifyDefFile blocker run.def calend  earth_365d ;;
349        360d)
350            IGCM_comp_modifyDefFile blocker run.def calend  earth_360d ;;
351        *)
352            IGCM_comp_modifyDefFile blocker run.def calend  earth_360d ;;
353    esac
354
355    IGCM_comp_modifyDefFile blocker run.def dayref    ${InitDay}
356    IGCM_comp_modifyDefFile blocker run.def nday      ${PeriodLengthInDays}
357
358    # Set anneeref different for gcm and ce0l
359    # Test if executable create_etat0_limit is present and lmdz.x is not present
360    if [ -f create_etat0_limit* ] || [ -f ce0l* ] && [ ! -f lmdz.x ] ; then
361        # for case ce0l : always take current year
362        IGCM_comp_modifyDefFile blocker run.def anneeref ${year}
363
364        # Temporary, set use_filtre_fft=n because we now use dyn3d for ce0l version where fft is not implemented.
365        # In more recent versions of LMDZ, this will not be needed.
366        IGCM_comp_modifyDefFile force   run.def use_filtre_fft n
367    else
368        # for case gcm : take first year of simulation
369        IGCM_comp_modifyDefFile blocker run.def anneeref ${InitYear}
370    fi
371
372    ## Determine from the variable ListOfComponents in config.card coupling to external models
373    ## and set corresponding parameters in run.def
374    echo ListOfComponents now running : ${config_ListOfComponents[*]}
375
376    if [ X${config_ListOfComponents_SRF} = Xorchidee ] ; then
377        echo "Activate ORCHIDEE, set VEGET=y in run.def"
378        IGCM_comp_modifyDefFile blocker run.def VEGET y
379    else
380        echo "No ORCHIDEE, set VEGET=n in run.def"
381        IGCM_comp_modifyDefFile blocker run.def VEGET n
382    fi
383
384    if [ X${config_ListOfComponents_CPL} = Xoasis ] ; then
385        echo "Activate coupling to ocean, set type_ocean=couple in run.def"
386        IGCM_comp_modifyDefFile blocker run.def type_ocean couple
387    else
388        echo "LMDZ is running in forced mode without ocean model, set type_ocean=force in run.def"
389        IGCM_comp_modifyDefFile nonblocker run.def type_ocean force
390    fi
391
392    if [ X${config_ListOfComponents_CHM} = Xinca ] ; then
393        echo "Activate coupling to INCA, set type_trac=inca in run.def"
394        IGCM_comp_modifyDefFile blocker run.def type_trac inca
395    elif [ X${config_ListOfComponents_CHM} = Xreprobus ] ; then
396        echo "Activate coupling to REPROBUS, set type_trac=repr in run.def"
397        IGCM_comp_modifyDefFile blocker run.def type_trac repr
398        IGCM_comp_modifyDefFile blocker run.def config_inca none
399    else
400        echo "No coupling to chemistry model, set type_trac=lmdz in run.def"
401        IGCM_comp_modifyDefFile blocker run.def type_trac lmdz
402        IGCM_comp_modifyDefFile blocker run.def config_inca none
403    fi
404
405
406    # run.def : Activate the call to phytrac
407    if [ ! X${lmdz_UserChoices_iflag_phytrac} = X ]; then
408        IGCM_comp_modifyDefFile nonblocker run.def iflag_phytrac ${lmdz_UserChoices_iflag_phytrac}
409    else
410        IGCM_comp_modifyDefFile nonblocker run.def iflag_phytrac 0
411    fi 
412
413    # physiq.def : Activate the call to phytrac
414    if [ ! X${lmdz_UserChoices_ok_bug_cv_trac} = X ]; then
415        IGCM_comp_modifyDefFile nonblocker physiq.def ok_bug_cv_trac  ${lmdz_UserChoices_ok_bug_cv_trac}
416    else
417        IGCM_comp_modifyDefFile nonblocker physiq.def ok_bug_cv_trac  n
418    fi 
419
420    # config.def : Activate direct radiative effect if ok_ade=y
421    if [ ! X${lmdz_UserChoices_ok_ade} = X ]; then
422        IGCM_comp_modifyDefFile nonblocker config.def ok_ade ${lmdz_UserChoices_ok_ade}
423    else
424        IGCM_comp_modifyDefFile nonblocker config.def ok_ade n
425    fi 
426
427    # config.def : Activate indirect radiative effect if ok_aie=y
428    if [ ! X${lmdz_UserChoices_ok_aie} = X ]; then
429        IGCM_comp_modifyDefFile nonblocker config.def ok_aie ${lmdz_UserChoices_ok_aie}
430    else
431        IGCM_comp_modifyDefFile nonblocker config.def ok_aie n
432    fi 
433
434    # config.def : Activate online aerosol coupled model if aerosol_couple=y
435    if [ ! X${lmdz_UserChoices_aerosol_couple} = X ]; then
436        IGCM_comp_modifyDefFile nonblocker config.def aerosol_couple ${lmdz_UserChoices_aerosol_couple}
437    else
438        IGCM_comp_modifyDefFile nonblocker config.def aerosol_couple n
439    fi 
440
441    # config.def : Activate online Ozone chemistry coupled model if chemistry_couple=y
442    if [ ! X${lmdz_UserChoices_chemistry_couple} = X ]; then
443        IGCM_comp_modifyDefFile nonblocker config.def chemistry_couple ${lmdz_UserChoices_chemistry_couple}
444    else
445        IGCM_comp_modifyDefFile nonblocker config.def chemistry_couple n
446    fi 
447
448    # config.def : Activate reading of ozone in climatology if read_climoz=2
449    if [ ! X${lmdz_UserChoices_read_climoz} = X ]; then
450        IGCM_comp_modifyDefFile nonblocker config.def read_climoz ${lmdz_UserChoices_read_climoz}
451    else
452        IGCM_comp_modifyDefFile nonblocker config.def read_climoz 0     
453    fi 
454
455    # config.def : Choose aerosol use in radiative effect
456    #  type of coupled aerosol =1 (default) =2 => bc  only =3 => pom only =4 => seasalt only
457    # =5 => dust only =6 => all aerosol   
458    if [ ! X${lmdz_UserChoices_flag_aerosol} = X ]; then
459        IGCM_comp_modifyDefFile nonblocker config.def flag_aerosol ${lmdz_UserChoices_flag_aerosol}
460    else
461        IGCM_comp_modifyDefFile nonblocker config.def flag_aerosol 0
462    fi 
463
464    # config.def : Activate calcul of Cloud droplet number concentration if ok_cdnc=y
465    if [ ! X${lmdz_UserChoices_ok_cdnc} = X ]; then
466        IGCM_comp_modifyDefFile nonblocker config.def ok_cdnc ${lmdz_UserChoices_ok_cdnc}
467    else
468        IGCM_comp_modifyDefFile nonblocker config.def ok_cdnc n
469    fi 
470
471    # config.def : Activate COSP
472    if [ ! X${lmdz_UserChoices_LMDZ_COSP_OK} = X ]; then
473        IGCM_comp_modifyDefFile nonblocker config.def ok_cosp ${lmdz_UserChoices_LMDZ_COSP_OK}
474    else
475        IGCM_comp_modifyDefFile nonblocker config.def ok_cosp n
476    fi 
477
478    # config.def : Modify parameter pmagic if it is set in lmdz.card
479    if [ ! X${lmdz_UserChoices_pmagic} = X ]; then
480        IGCM_comp_modifyDefFile nonblocker config.def pmagic ${lmdz_UserChoices_pmagic}
481    else
482        # Take default value set in config.def
483        IGCM_comp_modifyDefFile nonblocker config.def pmagic DEFAULT
484    fi 
485
486    # physiq.def : Modify parameter tau_gl if it is set in lmdz.card
487    if [ ! X${lmdz_UserChoices_tau_gl} = X ]; then
488        IGCM_comp_modifyDefFile nonblocker physiq.def tau_gl ${lmdz_UserChoices_tau_gl}
489    else
490        # Take default value set in physiq.def
491        IGCM_comp_modifyDefFile nonblocker config.def tau_gl DEFAULT
492    fi
493   
494
495    # guide.def : Activate nudging if ok_guide=y set in lmdz.card
496    if [ ! X${lmdz_UserChoices_ok_guide} = X ] ; then
497        IGCM_comp_modifyDefFile nonblocker guide.def ok_guide  ${lmdz_UserChoices_ok_guide}
498    else
499        IGCM_comp_modifyDefFile nonblocker guide.def ok_guide n
500    fi
501
502
503    ## Read ByPass_hgardfou_teta option in lmdz.card --> divide teta* by 2 if [ $ByPass_hgardfou_teta = 1 ]
504    ByPass_hgardfou_teta=${lmdz_UserChoices_ByPass_hgardfou_teta}
505    if [ X"${ByPass_hgardfou_teta}" = X"y" ] ; then
506        awk '{ if ($0 ~ /^teta.*=/) {split($0,a,"=") ; print a[1]"="a[2]/2"."} else print $0}' gcm.def > gcm.def.tmp
507        IGCM_sys_Mv gcm.def.tmp gcm.def
508        echo
509        IGCM_debug_Print 1 "ByPass_hgardfou_teta : ^teta*/2 in gcm.def"
510        echo
511        cat gcm.def
512        ByPass_hgardfou_teta=n
513        IGCM_card_WriteOption ${SUBMIT_DIR}/COMP/lmdz.card UserChoices ByPass_hgardfou_teta "${ByPass_hgardfou_teta}"
514    fi
515
516    ## Read ByPass_hgardfou_mats option in lmdz.card --> purmats=y 2 if [ $ByPass_hgardfou_mats = 1 ]
517    ByPass_hgardfou_mats=${lmdz_UserChoices_ByPass_hgardfou_mats}
518    if [ X"${ByPass_hgardfou_mats}" = X"y" ] ; then
519        sed -e "s/^purmats=.*/purmats=y/" gcm.def > gcm.def.tmp
520        IGCM_sys_Mv gcm.def.tmp gcm.def
521        echo
522        IGCM_debug_Print 1 "ByPass_hgardfou_mats : purmats=y in gcm.def"
523        echo
524        cat gcm.def
525        ByPass_hgardfou_mats=n
526        IGCM_card_WriteOption ${SUBMIT_DIR}/COMP/lmdz.card UserChoices ByPass_hgardfou_mats "${ByPass_hgardfou_mats}"
527    fi
528
529    # Add include of LMDZ context in iodef.xml
530    # In iodef.xml add on next line after "COMPONENT CONTEXT"
531    #  <context id="LMDZ" src="./context_lmdz.xml"/>
532    echo '<context id="LMDZ" src="./context_lmdz.xml"/>' > add.tmp
533    if [ X"$( echo ${config_UserChoices_ExpType} | grep CMIP6 )" != "X" ] ; then
534        echo '<context id="LMDZ" src="./ping_lmdz.xml"/>' >> add.tmp
535        echo '<context id="LMDZ" src="./dr2xml_lmdz.xml"/>' >> add.tmp
536    fi
537    cp iodef.xml iodef.xml.tmp
538    sed -e "/COMPONENT CONTEXT/r add.tmp" iodef.xml.tmp > iodef.xml
539    rm iodef.xml.tmp add.tmp
540
541    #Long Name as global attribute (if LongName is not empty)
542    if [ ! "X${config_UserChoices_LongName}" = "X" ] ; then
543        listfile=$(ls file_def*lmdz.xml)
544        echo "<variable id=\"LongName\" type=\"string\">${config_UserChoices_LongName}</variable>" > add.tmp
545        for file in ${listfile}
546        do
547            cp ${file} ${file}.tmp
548            sed -e "/<file id/r add.tmp" \
549                ${file}.tmp > ${file}
550            rm ${file}.tmp
551        done
552        rm add.tmp
553    fi
554           
555    IGCM_debug_PopStack "ATM_Update"
556}
557
558#-----------------------------------
559function ATM_Finalize
560{
561    IGCM_debug_PushStack "ATM_Finalize"
562
563    # Add special treatement for CARBON CYCLE
564    if [ X"${lmdz_UserChoices_CARBON_CYCLE}" = X"control" ] || [ X"${lmdz_UserChoices_CARBON_CYCLE}" = X"historical" ] ; then
565        ATM_Carbon_Finalize
566    fi
567
568    echo FINALIZE ATM !
569
570    IGCM_debug_PopStack "ATM_Finalize"
571}
572
573
574
575function ATM_Carbon_Update
576{
577    # This fuction will be called only if CARBON_CYCLE is set to control or historical in lmdz.card
578
579    IGCM_debug_PushStack "ATM_Carbon_Update"
580
581    typeset InitPeriodCo2 InitDateBeginCo2 InitDateEndCo2
582    typeset CO2SBG CO2MBG CO2LU CO2_ppm CO2_ppm_prec fCO2_ff
583    typeset PathCO2log
584    typeset PreviousLinelog LastPeriodDateBegin LastPeriodDateEnd LastDatesPeriod LastPREFIX
585   
586    if ( ${FirstInitialize} && [ X"${config_ATM_Restart}" = X"n" ] ) ; then
587        ##--Initialization of fluxes to an undefined value at the first run
588        UndefinedValueCo2=-9999
589        InitPeriodCo2=0
590        InitDateBeginCo2=${UndefinedValueCo2}
591        InitYearCo2=$(( ${year} - 1 )) 
592        InitDateEndCo2=${InitYearCo2}1231
593        fCO2_ff=${UndefinedValueCo2} 
594        CO2SBG=${UndefinedValueCo2}
595        CO2LU=${UndefinedValueCo2}
596        CO2MBG=${UndefinedValueCo2}
597        CO2_ppm_prec=${UndefinedValueCo2}
598        # Get the initial value of atmosp. pco2
599        CO2_ppm=${lmdz_UserChoices_co2_init}
600       
601        IGCM_sys_Cp ${SUBMIT_DIR}/co2.log.init ${SUBMIT_DIR}/co2.log
602        IGCM_sys_Chmod u+w ${SUBMIT_DIR}/co2.log
603       
604        # Save CO2 values in ExeCpuLog variable contents 5 fields
605        echo "${InitPeriodCo2} ${InitDateBeginCo2} ${InitDateEndCo2} ${CO2_ppm} ${CO2_ppm_prec} ${fCO2_ff} ${CO2MBG} ${CO2SBG} ${CO2LU}" |   \
606            gawk '{printf("  %11d | %15s | %15s | %22.15g | %20.15g | %11.8g | %11.8g | %12.8g | %12.8g \n", \
607                              $1,$2,$3,$4,$5,$6,$7,$8,$9)}' >> ${SUBMIT_DIR}/co2.log
608       
609        # Get the path where the log file co2.log is
610        PathCO2log=${SUBMIT_DIR} 
611        # Get Previous line in co2.log
612        PreviousLinelog=$( tail -1 ${PathCO2log}/co2.log )
613       
614    else
615       
616        # NEW parameter in config.card (even for Overule all restarts, you must modify the line after this comment ):
617        # !! NEW for Carbone cycle !! Path where to find old co2.log file for restart CO2.
618        #SubmitRestartPath=
619        if ( ${FirstInitialize} && [ X"${config_ATM_Restart}" = X"y" ] ) ; then
620            IGCM_card_DefineVariableFromOption ${SUBMIT_DIR}/config.card ATM SubmitRestartPath
621            PathCO2log=${config_ATM_SubmitRestartPath}
622            Date_r=$( IGCM_date_ConvertFormatToGregorian ${config_ATM_RestartDate} )
623            PreviousLinelog=$( grep ${Date_r} ${PathCO2log}/co2.log )
624           
625            IGCM_sys_Cp ${SUBMIT_DIR}/co2.log.init ${SUBMIT_DIR}/co2.log
626            IGCM_sys_Chmod u+w ${SUBMIT_DIR}/co2.log
627           
628            # Save Last Line of control in new co2.log file
629            InitPeriodCo2=0   
630            InitDateBeginCo2=$( echo "${PreviousLinelog[*]}" | gawk -F '|' '{gsub(" ",""); print $2}' )
631            InitDateEndCo2=$( echo "${PreviousLinelog[*]}" | gawk -F '|' '{gsub(" ",""); print $3}' )
632            fCO2_ff=$( echo "${PreviousLinelog[*]}" | gawk -F '|' '{gsub(" ",""); print $6}' )
633            CO2SBG=$( echo "${PreviousLinelog[*]}" | gawk -F '|' '{gsub(" ",""); print $8}' )
634            CO2LU=$( echo "${PreviousLinelog[*]}" | gawk -F '|' '{gsub(" ",""); print $9}' )
635            CO2MBG=$( echo "${PreviousLinelog[*]}" | gawk -F '|' '{gsub(" ",""); print $7}' )
636            CO2_ppm_prec=$( echo "${PreviousLinelog[*]}" | gawk -F '|' '{gsub(" ",""); print $5}' )
637            CO2_ppm=$( echo "${PreviousLinelog[*]}" | gawk -F '|' '{gsub(" ",""); print $4}' )
638           
639            echo "${InitPeriodCo2} ${InitDateBeginCo2} ${InitDateEndCo2} ${CO2_ppm} ${CO2_ppm_prec} ${fCO2_ff} ${CO2MBG} ${CO2SBG} ${CO2LU}" |   \
640                gawk '{printf("  %11d | %15s | %15s | %22.15g | %20.15g | %11.8g | %11.8g | %12.8g | %12.8g \n", \
641                              $1,$2,$3,$4,$5,$6,$7,$8,$9)}' >> ${SUBMIT_DIR}/co2.log
642        else
643           # Get restart line in co2.log
644            PathCO2log=${SUBMIT_DIR}
645            PreviousLinelog=$( tail -1 ${PathCO2log}/co2.log )
646           # Get the value of atmosp. pco2 in co2.log
647            CO2_ppm=$( echo "${PreviousLinelog[*]}" | gawk -F '|' '{gsub(" ",""); print $4}' )
648        fi
649       
650    fi
651   
652    if [ ${lmdz_UserChoices_CARBON_CYCLE} = historical ] ; then
653        # Modify co2_ppm in config.def only for historical run
654        # If not historical run, keep co2_ppm value set earlier by IGCM_comp_modifyDefFile
655        IGCM_comp_modifyDefFile force config.def co2_ppm     ${CO2_ppm}
656    fi
657    IGCM_debug_PopStack "ATM_Carbon_Update"
658}
659
660
661function ATM_Carbon_Finalize
662{
663    # This fuction will be called only if CARBON_CYCLE is set to control or historical in lmdz.card
664
665    IGCM_debug_PushStack "ATM_Carbon_Finalize"
666
667    typeset CO2SBG_3V CO2SBG CO2MBG CO2SRF CO2LU CO2_ppm CO2_ppm_prec fCO2_ff
668   
669        # Fossil fuel emission
670    if [ ${lmdz_UserChoices_CARBON_CYCLE} = control ] ; then
671            # For Control, no fossil fuel emission :
672        fCO2_ff=0
673        echo "Fossil Fuel for control run  :" ${fCO2_ff}
674    else
675            # For historical, get the fossile fuel file :
676        fCO2_ff=$( gawk "{if (match(\$0,\"${year}\ *${month}\")) {print \$3}}" ${SUBMIT_DIR}/PARAM/CMIP5_gridcar_CO2_emissions_fossil_fuel_Andres_1751-2007_monthly_SC.txt )
677        echo "Fossil Fuel for historical run  :" ${fCO2_ff}
678    fi
679   
680        # Get the value of ocean carbon flux
681    CO2MBG=$( ${SUBMIT_DIR}/COMP/lmdz_analyse_pisces_out.awk ocean.output )
682    CO2MBG=$( echo ${CO2MBG} | sed -e "s/ *//" )
683    echo "Ocean carbon flux  :" ${CO2MBG}
684   
685        # Get the value of land fluxes
686    set +A CO2SBG_3V -- $( ${SUBMIT_DIR}/COMP/lmdz_analyse_stomate_out.awk out_orchidee_0000 )
687    CO2SRF=$( echo ${CO2SBG_3V[0]} | sed -e "s/ *//" )
688    CO2LU=$( echo ${CO2SBG_3V[1]} | sed -e "s/ *//" )
689    CO2SBG=$( echo ${CO2SBG_3V[2]} | sed -e "s/ *//" )
690    echo "Land carbon flux (NEP)         :" ${CO2SRF}
691    echo "LU flux          (FLUC)        :" ${CO2LU}
692    echo "Total Land carbon flux (NBP)   :" ${CO2SBG}
693   
694        # Previous CO2
695    CO2_ppm_prec=$( echo "${PreviousLinelog[*]}" | gawk -F '|' '{gsub(" ",""); print $4}' )
696    echo "Previous CO2  :" ${CO2_ppm_prec}
697   
698        # Formula
699    CO2_ppm=$( echo "${CO2_ppm_prec} + (${fCO2_ff} + ${CO2MBG} + ${CO2SBG}) / 2.12" | bc -l )
700    echo "New CO2  :" ${CO2_ppm}
701   
702        # Save CO2 values in ExeCpuLog variable contents 5 fields
703    echo "${CumulPeriod} ${PeriodDateBegin} ${PeriodDateEnd} ${CO2_ppm} ${CO2_ppm_prec} ${fCO2_ff} ${CO2MBG} ${CO2SBG} ${CO2LU}" |   \
704        gawk '{printf("  %11d | %15s | %15s | %22.15g | %20.15g | %11.8g | %11.8g | %12.8g | %12.8g \n", \
705                           $1,$2,$3,$4,$5,$6,$7,$8,$9)}' >> ${SUBMIT_DIR}/co2.log
706   
707    IGCM_debug_PopStack "ATM_Carbon_Finalize"
708}
Note: See TracBrowser for help on using the repository browser.