[5586] | 1 | #- $Id: inca.card 70 2007-06-21 14:20:42Z acosce $ |
---|
| 2 | [Compatibility] |
---|
| 3 | libIGCM=1.0 |
---|
| 4 | |
---|
| 5 | [UserChoices] |
---|
[5903] | 6 | #regrid output files on regular grid |
---|
| 7 | xios_remap_output=y |
---|
[5586] | 8 | # Set LDMZ_10m_winds to choose if the simulation will use online 10m wind (=y) or offline (=n) |
---|
| 9 | LMDZ_10m_winds=n |
---|
| 10 | #choose threshold (10m winds) parameter value |
---|
| 11 | wind_parameter=0.78 |
---|
| 12 | #choose seasalt correctif |
---|
| 13 | seasalt_corr=1.06 |
---|
| 14 | # heat fluxes computed with feedback corresponding to 0 --> no aerosol effects, 1--> aerosol effects selected by ok_ade, ok_aie |
---|
| 15 | feedb=0 |
---|
| 16 | #coupled model with ORCH |
---|
| 17 | #if yes, you need to put to CHEMISTRY_BVOC=y in orchidee.def and decomment lines for fertilizer and bbg in orchidee.card |
---|
| 18 | CoupOrchInca=n |
---|
| 19 | #active or not chemistry flux in output |
---|
| 20 | calcul_flux=n |
---|
| 21 | #choose which type of aircraft you will use (0 - 1 - 2 - 3) (no aircraft / old inca aircraft / new subsonic inca aircraft / subsonic + hypersonic inca aircraft) |
---|
| 22 | flag_plane=0 |
---|
| 23 | #choose which time interpolation you want to interpolate sflx file. ( 0 - 1) (no interpolation / point to point interpolation) |
---|
| 24 | #be careful name of sflx file change with the choice of emi_interp_time ( no file / sflx_p2p.nc) |
---|
| 25 | emi_interp_time=1 |
---|
| 26 | |
---|
| 27 | # Specify output frequency for output files |
---|
| 28 | # File aerosols_from_inca will be systematically write in output with a monthly frequency - you cannot manage it from this card |
---|
| 29 | # for other files you can choose the frequency 1d (daily), 1mo (monthly), other (1ts, 5d, etc.) or NONE if to deactivate it |
---|
| 30 | # if you choose 1d the file will be store in CHM/Output/DA |
---|
| 31 | # if you choose 1mo the file will be store in CHM/Output/MO |
---|
| 32 | # if you choose another frequency, the file will be store in CHM/Output/DA by default |
---|
| 33 | |
---|
| 34 | output_frequency_ges=1d |
---|
| 35 | |
---|
| 36 | |
---|
| 37 | [InitialStateFiles] |
---|
[5651] | 38 | List= (${R_IN}/CHM/INCA144142-L79/chem_unstructured_start.nc, chem_start.nc) |
---|
[5586] | 39 | |
---|
| 40 | [BoundaryFiles] |
---|
[5625] | 41 | List=(${R_IN}/CHM/IPCC_AR6/OXYDANTS/144142-L79_yearly_interpolated/oxydants_${year}.nc, oxydants.nc ),\ |
---|
[5586] | 42 | (/ccc/work/cont003/subipsl/subipsl/ECMWF320x160/AN${year}/165_${year}${month}.nc , u10xios.nc ),\ |
---|
| 43 | (/ccc/work/cont003/subipsl/subipsl/ECMWF320x160/AN${year}/166_${year}${month}.nc , v10xios.nc ) |
---|
| 44 | |
---|
| 45 | |
---|
| 46 | ListNonDel= (${R_IN}/CHM/FILES_LONxLAT/landuse_lmdz_dyn.nc , landuse.nc ),\ |
---|
| 47 | (${R_IN}/CHM/FILES_LONxLAT/npp_dyn.nc , npp.nc ),\ |
---|
[5625] | 48 | (${R_IN}/CHM/INCA144142-L79/dustincaEC.nc , dustEC.nc ),\ |
---|
| 49 | (${R_IN}/CHM/INCA144142-L79/new_phototable.dat , phototable.dat ),\ |
---|
[5586] | 50 | (${R_IN}/CHM/IPCC_AR6/SFLX/VERS3/144142-L79/ANT/sflx_lmdz_ANT_2000_dyn.nc , sflx_ANT_LR.nc ),\ |
---|
| 51 | (${R_IN}/CHM/IPCC_AR6/SFLX/VERS3/144142-L79/BBG/sflx_lmdz_BBG_2000_dyn.nc , sflx_BBG_LR.nc ),\ |
---|
| 52 | (${R_IN}/CHM/IPCC_AR6/SFLX/VERS3/144142-L79/sflx_lmdz_GHG_dyn.nc , sflx_GHG_LR.nc ),\ |
---|
| 53 | (${R_IN}/CHM/IPCC_AR6/SFLX/VERS3/144142-L79/sflx_lmdz_NAT_dyn.nc , sflx_NAT_LR.nc ),\ |
---|
| 54 | (${R_IN}/CHM/IPCC_AR6/SFLX/VERS3/144142-L79/sflx_lmdz_MISC_dyn.nc , sflx_MISC_LR.nc ),\ |
---|
[5709] | 55 | (/ccc/work/cont003/gen2201/lloretth/co2_carbonator_1deg.nc , co2_carbonator.nc ) |
---|
[5586] | 56 | |
---|
| 57 | [ParametersFiles] |
---|
| 58 | List= (${SUBMIT_DIR}/PARAM/inca.def , . ),\ |
---|
| 59 | (${MODIPSL}/modeles/INCA/src/INCA_XML/context_inca.xml , . ),\ |
---|
| 60 | (${MODIPSL}/modeles/INCA/src/INCA_XML/context_input_inca.xml , . ),\ |
---|
| 61 | (${MODIPSL}/modeles/INCA/src/INCA_XML/context_oxydants_inca.xml , . ),\ |
---|
| 62 | (${MODIPSL}/modeles/INCA/src/INCA_XML/context_winds_inca.xml , . ),\ |
---|
| 63 | (${MODIPSL}/modeles/INCA/src/INCA_XML/context_start_GES_inca.xml, context_start_inca.xml ),\ |
---|
| 64 | (${MODIPSL}/modeles/INCA/src/INCA_XML/context_co2_bis_inca.xml , . ),\ |
---|
| 65 | (${MODIPSL}/modeles/INCA/src/INCA_XML/context_sflx_inca.xml , . ),\ |
---|
| 66 | (${MODIPSL}/modeles/INCA/src/INCA_XML/field_def_inca.xml , . ),\ |
---|
| 67 | (${MODIPSL}/modeles/INCA/src/INCA_XML/file_def_inca_restart.xml , file_def_inca_restart.xml ),\ |
---|
| 68 | (${MODIPSL}/modeles/INCA/src/INCA_XML/file_def_inca_GES.xml , file_def_inca.xml ),\ |
---|
[5705] | 69 | (${MODIPSL}/bin/inca_${OptMode}_${ConfChem}.dat , inca.dat ) |
---|
[5586] | 70 | |
---|
| 71 | [RestartFiles] |
---|
| 72 | # List restart that have to be saved/restored each loop (file out, saved, and in) : |
---|
[5841] | 73 | List= (chem_restart.nc, chem_restart.nc, chem_start.nc) |
---|
[5586] | 74 | |
---|
| 75 | [OutputText] |
---|
| 76 | List=(inca.out, inca.def,context_inca.xml,field_def_inca.xml,file_def_inca.xml, inca_IDxml.out) |
---|
| 77 | |
---|
| 78 | [OutputFiles] |
---|
[5651] | 79 | List= (inca1d_ges.nc, ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_ges.nc, Post_1D_inca_ges ),\ |
---|
[5586] | 80 | (inca1mo_ges.nc, ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_ges.nc, NONE ) |
---|
[5651] | 81 | |
---|
| 82 | |
---|
| 83 | [Post_1D_inca_ges] |
---|
| 84 | Patches= () |
---|
| 85 | GatherWithInternal = (lon, lat, presnivs, , time_centered, time_centered_bounds, time_counter,area) |
---|
[5874] | 86 | TimeSeriesVars2D = (emico2bih) |
---|
[5651] | 87 | ChunckJob2D = NONE |
---|
[5874] | 88 | TimeSeriesVars3D = (vmrch4,vmrco,vmrco2bih,jn2o,jmcf) |
---|
[5651] | 89 | ChunckJob3D = NONE |
---|
| 90 | Seasonal=OFF |
---|