source: CONFIG/UNIFORM/v7/IPSLCM7/EXPERIMENTS/ICOLMDZOR/clim_pdControl_ORCHv4/COMP/orchidee.card @ 6520

Last change on this file since 6520 was 6520, checked in by jgipsl, 11 months ago

Change to use soils_param_zobler_coord.nc instead of soils_param.nc. Only difference is that the file contains the coordinate variables x and y to avoid the need for setting the bounds for longitudes and latitudes in the xml file for the reading. see also ticket https://forge.ipsl.jussieu.fr/orchidee/ticket/928
Also, the reading of bare soil albedo is now done from file soilcolor.nc. This is done to make it easier to change between zobler and usda (only changing the soiltext part of the file).

No change in results.

File size: 4.4 KB
Line 
1[Compatibility]
2libIGCM=1.0
3
4[UserChoices]
5# Select the PFT and age class set-up. NOTE: the number of PFTs should match the
6# number in the land cover and maps. The number of age classes does not affect the
7# maps that can be used.
8DefSuffix = 15pft.1ac
9
10# VEGET_UPDATE_at_start=y : orchidee.driver will set VEGET_UPDATE=1Y at the first cumul period when starting a new simulation.
11#                           After the first period, VEGET_UPDATE will be set according to the choice done below. 
12VEGET_UPDATE_at_start=n
13
14# VEGET_UPDATE=0Y : default, do not update the vegetation and woodharvest file except if starting without restart file
15# VEGET_UPDATE=1Y : update the vegetation and woodharvest file 1st of January each year
16VEGET_UPDATE=0Y
17
18# Choice for routing scheme. Set ROUTING below to have following parameters set in orchidee.def :
19# ROUTING=standard   => in orchidee.def RIVER_ROUTING=y and ROUTING_METHOD=standard
20# ROUTING=simple     => in orchidee.def RIVER_ROUTING=y and ROUTING_METHOD=simple
21# ROUTING=off        => in orchidee.def RIVER_ROUTING=n
22ROUTING=simple
23
24# Specify output level for output files
25# Only the files sechiba_history.nc, sechiba_out_2.nc and sechiba_history_4dim.nc can be set here.
26# output_level_filename=0     : lowest level writing only variables needed for the monitoring
27# output_level_filename=12    : highest level which will output all variables
28# output_level_filename=NONE  : deactivate the file
29output_level_sechiba_history = 11
30output_level_sechiba_out_2 = NONE
31output_level_sechiba_history_4dim = 11
32
33# Specify output frequency for each file [1y, 1mo, 1d, 10800s, 1ts]
34# Settings using WriteFrequency in config.card is not longer used
35output_freq_sechiba_history = 1mo
36output_freq_sechiba_out_2 = 10800s
37output_freq_sechiba_history_4dim = 1mo
38
39
40[InitialStateFiles]
41List=   (${R_IN}/SRF/SOIL/soils_param_zobler_coord.nc, soils_param.nc ), \
42        (${R_IN}/SRF/SOIL/soils_param_zobler_coord.nc, soilcolor.nc ), \
43        (${R_IN}/SRF/SOIL/soil_bulk_and_ph.nc, .), \
44        (${R_IN}/SRF/reftemp4.nc, reftemp.nc ), \
45        (${R_IN}/SRF/cartepente2d_15min4.nc, cartepente2d_15min.nc)
46
47[BoundaryFiles]
48List= ()
49ListNonDel= (${R_IN}/SRF/PFTMAPS/CMIP6/ESA-LUH2v2/historical/15PFT.v2/PFTmap_2000.nc, PFTmap.nc),\
50            (${R_IN}/SRF/ROUTING/routing_simple.nc, .)
51
52[SmoothFiles]
53List= ()
54
55[ParametersFiles]
56List=   (${SUBMIT_DIR}/PARAM/orchidee.def_v4, orchidee.def)   ,\
57        (${SUBMIT_DIR}/PARAM/orchidee_pft.def_${DefSuffix}_v4, orchidee_pft.def) ,\
58        (${MODIPSL}/modeles/ORCHIDEE_trunk/src_xml/file_def_orchidee.xml, .)  ,\
59        (${MODIPSL}/modeles/ORCHIDEE_trunk/src_xml/context_input_orchidee.xml, .) ,\
60        (${MODIPSL}/modeles/ORCHIDEE_trunk/src_xml/context_orchidee.xml, .)   ,\
61        (${MODIPSL}/modeles/ORCHIDEE_trunk/src_xml/context_routing_orchidee.xml, .)   ,\
62        (${MODIPSL}/modeles/ORCHIDEE_trunk/src_xml/field_def_orchidee.xml, .)
63
64[RestartFiles]
65List=   (sechiba_rest_out.nc, sechiba_rest.nc, sechiba_rest_in.nc) ,\
66        (routing_restart.nc, routing_restart.nc, routing_start.nc)
67
68[OutputText]
69List=   (out_orchidee, orchidee.def, used_orchidee.def, iodef.xml, context_orchidee.xml, context_routing_orchidee.xml, context_input_orchidee.xml, field_def_orchidee.xml, file_def_orchidee.xml, river_desc.nc)
70
71[OutputFiles]
72List=   (sechiba_history.nc,   ${R_OUT_SRF_O_M}/${PREFIX}_1M_sechiba_history.nc, Post_1M_sechiba_history), \
73        (sechiba_history_4dim.nc,${R_OUT_SRF_O_M}/${PREFIX}_1M_sechiba_history_4dim.nc, NONE), \
74        (sechiba_out_2.nc,     ${R_OUT_SRF_O_H}/${PREFIX}_HF_sechiba_out_2.nc,   NONE)
75
76[Post_1M_sechiba_history]
77Patches = ()
78GatherWithInternal = (lon, lat, time_counter, Areas, Contfrac, time_centered, time_centered_bounds)
79TimeSeriesVars2D = (nobiofrac, alb_nir, alb_vis, evap, fluxlat, fluxsens, netrad, qair, rain, runoff, snow, snownobio, snowf, frac_snow, subli, tair, temp_sol, tsol_max, tsol_min, drainage,mrsos, mrso, mrros, mrro, prveg, evspsblveg, evspsblsoi, tran, treeFrac, grassFrac, cropFrac, baresoilFrac, residualFrac, TWBR, riverflow, coastalflow, DelSoilMoist_daily, DelIntercept_daily, DelSWE_daily, delstock_routing_daily, snowmelt, LAImean, transpir, evapnu)
80ChunckJob2D = NONE
81TimeSeriesVars3D = (lai, maxvegetfrac, vegetfrac, ptn, nee)
82ChunckJob3D = NONE
83Seasonal = ON
84
85[Post_HF_sechiba_out_2]
86Patches = ()
87GatherWithInternal = (lon, lat, time_counter, Areas, Contfrac, time_centered, time_centered_bounds)
88TimeSeriesVars2D = (mrsos, mrro)
89ChunckJob2D = 50Y
90TimeSeriesVars3D = (ptn)
91ChunckJob3D = 10Y
92Seasonal = OFF
93
Note: See TracBrowser for help on using the repository browser.