[6204] | 1 | #!/bin/ksh |
---|
| 2 | |
---|
| 3 | #************************************************************** |
---|
| 4 | # Author: Sebastien Denvil, Martial Mancip |
---|
| 5 | # Contact: Sebastien.Denvil__at__ipsl.jussieu.fr Martial.Mancip__at__ipsl.jussieu.fr |
---|
| 6 | # $Revision:: 1546 $ Revision of last commit |
---|
| 7 | # $Author:: acosce $ Author of last commit |
---|
| 8 | # $Date:: 2021-02-09 14:28:14 +0100 (Tue, 09 Feb 2021) $ Date of last commit |
---|
| 9 | # IPSL (2006) |
---|
| 10 | # This software is governed by the CeCILL licence see libIGCM/libIGCM_CeCILL.LIC |
---|
| 11 | # |
---|
| 12 | #************************************************************** |
---|
| 13 | |
---|
| 14 | #=================================== |
---|
| 15 | function IGCM_config_CommonConfiguration |
---|
| 16 | { |
---|
| 17 | IGCM_debug_PushStack "IGCM_config_CommonConfiguration" $@ |
---|
| 18 | |
---|
| 19 | # Debug Print : |
---|
| 20 | [ ${Verbosity} -gt 0 ] && echo |
---|
| 21 | IGCM_debug_Print 1 "IGCM_config_CommonConfiguration" $@ |
---|
| 22 | |
---|
| 23 | # config.card path |
---|
| 24 | configCardPath=$1 |
---|
| 25 | |
---|
| 26 | #================================== |
---|
| 27 | typeset option auxprint |
---|
| 28 | |
---|
| 29 | #================================== |
---|
| 30 | # Read UserChoices section: |
---|
| 31 | [ ${Verbosity} -gt 0 ] && echo |
---|
| 32 | IGCM_debug_Print 1 "DefineArrayFromOption : config_UserChoices" |
---|
| 33 | |
---|
| 34 | IGCM_card_DefineArrayFromSection ${configCardPath} UserChoices |
---|
| 35 | for option in ${config_UserChoices[*]} ; do |
---|
| 36 | IGCM_card_DefineVariableFromOption ${configCardPath} UserChoices ${option} |
---|
| 37 | eval auxprint=\${config_UserChoices_${option}} |
---|
| 38 | IGCM_debug_Print 3 "${option} : ${auxprint}" |
---|
| 39 | done |
---|
| 40 | |
---|
| 41 | # Set variables with shorter names on some variables which |
---|
| 42 | # are used in the executable name in config.card |
---|
| 43 | ResolAtm=${config_UserChoices_ResolAtm} |
---|
| 44 | ResolOce=${config_UserChoices_ResolOce} |
---|
| 45 | ConfChem=${config_UserChoices_ConfChem} |
---|
| 46 | OptMode=${config_UserChoices_OptMode} |
---|
| 47 | |
---|
| 48 | #================================== |
---|
| 49 | # Read Ensemble section: |
---|
| 50 | [ ${Verbosity} -gt 0 ] && echo |
---|
| 51 | IGCM_debug_Print 1 "DefineArrayFromOption : config_Ensemble" |
---|
| 52 | |
---|
| 53 | IGCM_card_DefineArrayFromSection ${configCardPath} Ensemble |
---|
| 54 | for option in ${config_Ensemble[*]} ; do |
---|
| 55 | IGCM_card_DefineVariableFromOption ${configCardPath} Ensemble ${option} |
---|
| 56 | eval auxprint=\${config_Ensemble_${option}} |
---|
| 57 | IGCM_debug_Print 3 "${option} : ${auxprint}" |
---|
| 58 | done |
---|
| 59 | |
---|
| 60 | #================================== |
---|
| 61 | # Read Post section: |
---|
| 62 | [ ${Verbosity} -gt 0 ] && echo |
---|
| 63 | IGCM_debug_Print 1 "DefineArrayFromOption : config_Post" |
---|
| 64 | |
---|
| 65 | IGCM_card_DefineArrayFromSection ${configCardPath} Post |
---|
| 66 | for option in ${config_Post[*]} ; do |
---|
| 67 | IGCM_card_DefineVariableFromOption ${configCardPath} Post ${option} |
---|
| 68 | eval auxprint=\${config_Post_${option}} |
---|
| 69 | IGCM_debug_Print 3 "${option} : ${auxprint}" |
---|
| 70 | done |
---|
| 71 | [ ${Verbosity} -gt 0 ] && echo |
---|
| 72 | |
---|
| 73 | #================================== |
---|
| 74 | # Define default value to keep compatibility with previous card: means before changes due to TGCC |
---|
| 75 | # Apply some overrules to ensure proper usage of computing centres resources |
---|
| 76 | # |
---|
| 77 | |
---|
| 78 | # if RebuildFrequency is not define in config.card - we initilize it to NONE |
---|
| 79 | if [ X${config_Post_RebuildFrequency} = X ] ; then |
---|
| 80 | config_Post_RebuildFrequency=NONE |
---|
| 81 | fi |
---|
| 82 | |
---|
| 83 | if [ X${PackDefault} = Xtrue ] ; then |
---|
| 84 | if [ X${config_UserChoices_SpaceName} = XTEST ]; then |
---|
| 85 | # TEST simulations will not be packed and will stay on SCRATCHDIR filesystem |
---|
| 86 | IGCM_debug_Print 1 "SpaceName=TEST. OVERRULE PackFrequency to NONE" |
---|
| 87 | config_Post_PackFrequency=NONE |
---|
| 88 | else |
---|
| 89 | # Default to RebuildFrequency if nothing has been set up related to PackFrequency |
---|
| 90 | [ X${config_Post_PackFrequency} = X ] && config_Post_PackFrequency=${config_Post_RebuildFrequency} |
---|
| 91 | fi |
---|
| 92 | else |
---|
| 93 | # If we DO NOT apply pack in this computing center |
---|
| 94 | config_Post_PackFrequency=NONE |
---|
| 95 | fi |
---|
| 96 | |
---|
| 97 | #==================================================== |
---|
| 98 | # Define ARCHIVE : Dedicated to large files |
---|
| 99 | # Define STORAGE : Dedicated to small/medium files |
---|
| 100 | # Define R_OUT : Output tree located on ARCHIVE |
---|
| 101 | # Define R_BUF : Output tree located on STORAGE (files waiting treatment, or file lcoation when SpaceName=!PROD) |
---|
| 102 | # Define R_FIG : Output tree located on STORAGE hosting figures (monitoring and atlas, and/or small files) |
---|
| 103 | # Define R_TMP : A temporary space used by IGCM_debug_send_AMQP_msg__MAILTUNNEL. Must be persistent in between jobs |
---|
| 104 | IGCM_sys_defineArchives |
---|
| 105 | |
---|
| 106 | #==================================================== |
---|
| 107 | # R_SAVE : Job output directory |
---|
| 108 | # R_BUFR : Job output buffered directory |
---|
| 109 | # R_CMIP : Job output directory for CMIP6 standard files |
---|
| 110 | |
---|
| 111 | if ( [ ! X${config_UserChoices_SpaceName} = X ] && [ ! X${config_UserChoices_ExperimentName} = X ] ) ; then |
---|
| 112 | FreeName=$( echo ${config_UserChoices_JobName} | sed 's/.*_//' ) |
---|
| 113 | if ( [ ! X${config_Ensemble_EnsembleName} = X ] && [ ! X${config_Ensemble_EnsembleDate} = X ] ) ; then |
---|
| 114 | R_SAVE=${R_OUT}/${config_UserChoices_TagName}/${config_UserChoices_SpaceName}/${config_UserChoices_ExperimentName}/${config_Ensemble_EnsembleName}/${config_Ensemble_EnsembleDate}/${FreeName} |
---|
| 115 | R_FIGR=${R_FIG}/${config_UserChoices_TagName}/${config_UserChoices_SpaceName}/${config_UserChoices_ExperimentName}/${config_Ensemble_EnsembleName}/${config_Ensemble_EnsembleDate}/${FreeName} |
---|
| 116 | R_BUFR=${R_BUF}/${config_UserChoices_TagName}/${config_UserChoices_SpaceName}/${config_UserChoices_ExperimentName}/${config_Ensemble_EnsembleName}/${config_Ensemble_EnsembleDate}/${FreeName} |
---|
| 117 | R_DODS=${config_UserChoices_TagName}/${config_UserChoices_SpaceName}/${config_UserChoices_ExperimentName}/${config_Ensemble_EnsembleName}/${config_Ensemble_EnsembleDate}/${FreeName} |
---|
| 118 | R_CMIP=${CMIP6_BUF}/${config_UserChoices_TagName}/${config_UserChoices_SpaceName}/${config_UserChoices_ExperimentName}/${config_Ensemble_EnsembleName}/${config_Ensemble_EnsembleDate}/${FreeName} |
---|
| 119 | else |
---|
| 120 | R_SAVE=${R_OUT}/${config_UserChoices_TagName}/${config_UserChoices_SpaceName}/${config_UserChoices_ExperimentName}/${FreeName} |
---|
| 121 | R_FIGR=${R_FIG}/${config_UserChoices_TagName}/${config_UserChoices_SpaceName}/${config_UserChoices_ExperimentName}/${FreeName} |
---|
| 122 | R_BUFR=${R_BUF}/${config_UserChoices_TagName}/${config_UserChoices_SpaceName}/${config_UserChoices_ExperimentName}/${FreeName} |
---|
| 123 | R_DODS=${config_UserChoices_TagName}/${config_UserChoices_SpaceName}/${config_UserChoices_ExperimentName}/${FreeName} |
---|
| 124 | R_CMIP=${CMIP6_BUF}/${config_UserChoices_TagName}/${config_UserChoices_SpaceName}/${config_UserChoices_ExperimentName}/${FreeName} |
---|
| 125 | fi |
---|
| 126 | else |
---|
| 127 | if ( [ ! X${config_Ensemble_EnsembleName} = X ] && [ ! X${config_Ensemble_EnsembleDate} = X ] ) ; then |
---|
| 128 | R_SAVE=${R_OUT}/${config_UserChoices_TagName}/${config_Ensemble_EnsembleName}/${config_Ensemble_EnsembleDate}/${config_UserChoices_JobName} |
---|
| 129 | R_FIGR=${R_FIG}/${config_UserChoices_TagName}/${config_Ensemble_EnsembleName}/${config_Ensemble_EnsembleDate}/${config_UserChoices_JobName} |
---|
| 130 | R_BUFR=${R_BUF}/${config_UserChoices_TagName}/${config_Ensemble_EnsembleName}/${config_Ensemble_EnsembleDate}/${config_UserChoices_JobName} |
---|
| 131 | R_DODS=${config_UserChoices_TagName}/${config_Ensemble_EnsembleName}/${config_Ensemble_EnsembleDate}/${config_UserChoices_JobName} |
---|
| 132 | else |
---|
| 133 | R_SAVE=${R_OUT}/${config_UserChoices_TagName}/${config_UserChoices_JobName} |
---|
| 134 | R_FIGR=${R_FIG}/${config_UserChoices_TagName}/${config_UserChoices_JobName} |
---|
| 135 | R_BUFR=${R_BUF}/${config_UserChoices_TagName}/${config_UserChoices_JobName} |
---|
| 136 | R_DODS=${config_UserChoices_TagName}/${config_UserChoices_JobName} |
---|
| 137 | fi |
---|
| 138 | fi |
---|
| 139 | |
---|
| 140 | #==================================================== |
---|
| 141 | # Define R_OUT_KSH : Storage place for job output |
---|
| 142 | # Define R_OUT_EXE : Storage place for binary used during simulation |
---|
| 143 | R_OUT_KSH=${R_SAVE}/Out |
---|
| 144 | R_OUT_EXE=${R_SAVE}/Exe |
---|
| 145 | |
---|
| 146 | #==================================================== |
---|
| 147 | # Define R_BUF_KSH : Buffer place for job output |
---|
| 148 | # Define R_BUF_EXE : Buffer place for binary used during simulation |
---|
| 149 | R_BUF_KSH=${R_BUFR}/Out |
---|
| 150 | R_BUF_EXE=${R_BUFR}/Exe |
---|
| 151 | |
---|
| 152 | #==================================================== |
---|
| 153 | # Define REBUILD_DIR : where we store files needing rebuild process |
---|
| 154 | REBUILD_DIR=${R_BUFR}/REBUILD |
---|
| 155 | if [ ! X${TaskType} = Xchecking ] ; then |
---|
| 156 | IGCM_sys_MkdirWork ${REBUILD_DIR} |
---|
| 157 | fi |
---|
| 158 | |
---|
| 159 | #==================================================== |
---|
| 160 | # DodsCopy : apply default value if not defined |
---|
| 161 | if ( [ X${config_Post_DodsCopy} = X${NULL_STR} ] || [ X${config_Post_DodsCopy} = X ] ) ; then |
---|
| 162 | config_Post_DodsCopy=TRUE |
---|
| 163 | fi |
---|
| 164 | |
---|
| 165 | #==================================================== |
---|
| 166 | # AtlasIPSL : apply default value if not defined |
---|
| 167 | if ( [ X${config_Post_AtlasIPSL} = X${NULL_STR} ] || [ X${config_Post_AtlasIPSL} = X ] ) ; then |
---|
| 168 | config_Post_AtlasIPSL=FALSE |
---|
| 169 | fi |
---|
| 170 | |
---|
| 171 | #==================================================== |
---|
| 172 | # ParserXIOS : apply default value if not defined |
---|
| 173 | if ( [ X${config_Post_ParserXIOS} = X${NULL_STR} ] || [ X${config_Post_ParserXIOS} = X ] ) ; then |
---|
| 174 | config_Post_ParserXIOS=FALSE |
---|
| 175 | fi |
---|
| 176 | |
---|
| 177 | #==================================================== |
---|
| 178 | # MetricsPCMDI : apply default value if not defined |
---|
| 179 | if ( [ X${config_Post_MetricsPCMDI} = X${NULL_STR} ] || [ X${config_Post_MetricsPCMDI} = X ] ) ; then |
---|
| 180 | config_Post_MetricsPCMDI=FALSE |
---|
| 181 | fi |
---|
| 182 | |
---|
| 183 | #==================================================== |
---|
| 184 | # IgnoreNonMonotonic : apply default value if not defined |
---|
| 185 | if ( [ X${config_Post_IgnoreNonMonotonic} = X${NULL_STR} ] || [ X${config_Post_IgnoreNonMonotonic} = X ] ) ; then |
---|
| 186 | config_Post_IgnoreNonMonotonic=FALSE |
---|
| 187 | fi |
---|
| 188 | |
---|
| 189 | #==================================================== |
---|
| 190 | # LightRestartPack : apply default value if not defined |
---|
| 191 | if ( [ X${config_Post_LightRestartPack} = X${NULL_STR} ] || [ X${config_Post_LightRestartPack} = X ] ) ; then |
---|
| 192 | config_Post_LightRestartPack=FALSE |
---|
| 193 | fi |
---|
| 194 | |
---|
| 195 | #==================================================== |
---|
| 196 | # dr2xmlIPSL : apply default value if not defined |
---|
| 197 | if ( [ X${config_Post_dr2xmlIPSL} = X${NULL_STR} ] || [ X${config_Post_dr2xmlIPSL} = X ] ) ; then |
---|
| 198 | config_Post_dr2xmlIPSL=FALSE |
---|
| 199 | fi |
---|
| 200 | |
---|
| 201 | |
---|
| 202 | #==================================================== |
---|
| 203 | # Define StackFileLocation : directory where we store stack files |
---|
| 204 | # Define StackFileName : stack file containing call tree and instrumentation |
---|
| 205 | # Stack file containing call tree will be stored there. |
---|
| 206 | if ( $DEBUG_debug ) ; then |
---|
| 207 | StackFileLocation=${StackFileLocation:=${R_BUF_KSH}} |
---|
| 208 | [ ! -d ${StackFileLocation} ] && mkdir -p ${StackFileLocation} |
---|
| 209 | if [ X${TaskType} = Xcomputing ]; then |
---|
| 210 | StackFileName=computing.stack.$$ |
---|
| 211 | elif [ X${TaskType} = Xpost-processing ]; then |
---|
| 212 | StackFileName=${Script_Post_Output}.stack.$$ |
---|
| 213 | elif [ X${TaskType} = Xchecking ]; then |
---|
| 214 | StackFileName=checking.stack.$$ |
---|
| 215 | else |
---|
| 216 | IGCM_debug_Exit "IGCM_config_CommonConfiguration unknown TaskType : ${TaskType}" |
---|
| 217 | IGCM_debug_Verif_Exit |
---|
| 218 | fi |
---|
| 219 | |
---|
| 220 | # This boolean will trigger the filling of the stack |
---|
| 221 | # Only now we know where things should be ... |
---|
| 222 | # We don't fill the stack when we perform checking task |
---|
| 223 | if [ ! X${TaskType} = Xchecking ] ; then |
---|
| 224 | ActivateStackFilling=true |
---|
| 225 | fi |
---|
| 226 | fi |
---|
| 227 | |
---|
| 228 | IGCM_debug_PopStack "IGCM_config_CommonConfiguration" |
---|
| 229 | } |
---|
| 230 | |
---|
| 231 | #=================================== |
---|
| 232 | function IGCM_config_Initialize |
---|
| 233 | { |
---|
| 234 | IGCM_debug_PushStack "IGCM_config_Initialize" |
---|
| 235 | |
---|
| 236 | # Debug Print : |
---|
| 237 | echo |
---|
| 238 | IGCM_debug_Print 1 "IGCM_config_Initialize" |
---|
| 239 | |
---|
| 240 | # Test modipsl tree existence. |
---|
| 241 | IGCM_sys_TestDir ${MODIPSL} |
---|
| 242 | [ $? != 0 ] && IGCM_debug_Exit "IGCM_sys_TestDir" |
---|
| 243 | IGCM_sys_TestDir ${libIGCM} |
---|
| 244 | [ $? != 0 ] && IGCM_debug_Exit "IGCM_sys_TestDir" |
---|
| 245 | IGCM_sys_TestDir ${R_EXE} |
---|
| 246 | [ $? != 0 ] && IGCM_debug_Exit "IGCM_sys_TestDir" |
---|
| 247 | IGCM_sys_TestDir ${SUBMIT_DIR} |
---|
| 248 | [ $? != 0 ] && IGCM_debug_Exit "IGCM_sys_TestDir" |
---|
| 249 | |
---|
| 250 | if ( $DEBUG_debug ) ; then |
---|
| 251 | echo "Keep trace of inital SUBMIT_DIR : " |
---|
| 252 | ls -lta ${SUBMIT_DIR} |
---|
| 253 | fi |
---|
| 254 | |
---|
| 255 | #================================== |
---|
| 256 | # Read ListOfComponents section: |
---|
| 257 | echo |
---|
| 258 | IGCM_debug_Print 1 "DefineArrayFromSection : ListOfComponents" |
---|
| 259 | |
---|
| 260 | IGCM_card_DefineArrayFromSection ${SUBMIT_DIR}/config.card ListOfComponents |
---|
| 261 | for comp in ${config_ListOfComponents[*]} ; do |
---|
| 262 | IGCM_card_DefineArrayFromOption ${SUBMIT_DIR}/config.card ListOfComponents ${comp} |
---|
| 263 | done |
---|
| 264 | IGCM_debug_Print 3 ${config_ListOfComponents[*]} |
---|
| 265 | |
---|
| 266 | #================================== |
---|
| 267 | # Read Executable section: |
---|
| 268 | IGCM_card_DefineArrayFromSection ${SUBMIT_DIR}/config.card Executable |
---|
| 269 | |
---|
| 270 | #================================== |
---|
| 271 | # Read Restarts section: |
---|
| 272 | # Restarts : Gerneral rule or local for each component. |
---|
| 273 | echo |
---|
| 274 | IGCM_debug_Print 1 "DefineArrayFromOption : config_Restarts" |
---|
| 275 | |
---|
| 276 | IGCM_card_DefineArrayFromSection ${SUBMIT_DIR}/config.card Restarts |
---|
| 277 | for option in ${config_Restarts[*]} ; do |
---|
| 278 | IGCM_card_DefineVariableFromOption ${SUBMIT_DIR}/config.card Restarts ${option} |
---|
| 279 | eval auxprint=\${config_Restarts_${option}} |
---|
| 280 | IGCM_debug_Print 3 "${option} : ${auxprint}" |
---|
| 281 | done |
---|
| 282 | |
---|
| 283 | #================================== |
---|
| 284 | # Define Job Outputs Name |
---|
| 285 | echo |
---|
| 286 | IGCM_debug_Print 2 "Define Script_Output_Prefix and Exe_Output" |
---|
| 287 | Script_Output_Prefix=${config_UserChoices_Script_Output_Prefix:='Script_Output'} |
---|
| 288 | IGCM_debug_Print 3 "Script_Output_Prefix = ${Script_Output_Prefix}" |
---|
| 289 | Exe_Output=out_execution |
---|
| 290 | IGCM_debug_Print 3 "Exe_Output = ${Exe_Output}" |
---|
| 291 | |
---|
| 292 | #===================================================================# |
---|
| 293 | # Prepare variables available for ${COMP}.card and ${COMP}.driver # |
---|
| 294 | # But available to any son functions # |
---|
| 295 | #===================================================================# |
---|
| 296 | |
---|
| 297 | # Convert yyyy-mm-dd date to gregorian yyyymmdd |
---|
| 298 | DateBegin=$( IGCM_date_ConvertFormatToGregorian ${config_UserChoices_DateBegin} ) |
---|
| 299 | DateEnd=$( IGCM_date_ConvertFormatToGregorian ${config_UserChoices_DateEnd} ) |
---|
| 300 | EndYear=$(( $( IGCM_date_ConvertGregorianDateToJulian $DateEnd ) / 1000 )) |
---|
| 301 | EndYear_p1=$(( $( IGCM_date_ConvertGregorianDateToJulian $DateEnd ) / 1000 + 1 )) |
---|
| 302 | |
---|
| 303 | |
---|
| 304 | # Period Length In Days between DateBegin and DateEnd |
---|
| 305 | (( ExperienceLengthInDays=$( IGCM_date_DaysBetweenGregorianDate ${DateEnd} ${DateBegin} ) + 1 )) |
---|
| 306 | if [ ${ExperienceLengthInDays} -lt 0 ] ; then |
---|
| 307 | IGCM_debug_Print 1 "Problem with dates in config.card : ${DateEnd} < ${DateBegin} ! You must check that." |
---|
| 308 | IGCM_debug_Exit "IGCM_config_Initialize" " Wrong Dates." |
---|
| 309 | IGCM_debug_Verif_Exit |
---|
| 310 | fi |
---|
| 311 | |
---|
| 312 | # Day and Year of Initial State (Given in julian format) |
---|
| 313 | InitDay=$(( $( IGCM_date_ConvertGregorianDateToJulian $DateBegin ) % 1000 )) |
---|
| 314 | InitYear=$(( $( IGCM_date_ConvertGregorianDateToJulian $DateBegin ) / 1000 )) |
---|
| 315 | InitYear_m1=$(( $( IGCM_date_ConvertGregorianDateToJulian $DateBegin ) / 1000 - 1 )) |
---|
| 316 | |
---|
| 317 | #================================================================# |
---|
| 318 | # Test and Prepare directories # |
---|
| 319 | #================================================================# |
---|
| 320 | |
---|
| 321 | # ==> 4 kinds of input files : |
---|
| 322 | # 1) R_INIT : Initial State Files (Etat0, carteveg) |
---|
| 323 | # 2) R_BC : Boundary Conditions (Forcages, lai) |
---|
| 324 | # 3) Parameters files (allready define through ${SUBMIT_DIR}) |
---|
| 325 | # 4) Restarts files (allready define in IGCM_config_Initialize) |
---|
| 326 | |
---|
| 327 | # Here we offer the possibility to redefine R_INIT, R_BC |
---|
| 328 | # and PeriodNb through config.card |
---|
| 329 | R_INIT=${config_UserChoices_R_INIT:=${R_IN}/INIT} |
---|
| 330 | echo |
---|
| 331 | IGCM_debug_Print 2 "(Re)Define R_INIT, R_BC and PeriodNb" |
---|
| 332 | IGCM_debug_Print 3 "R_IN=${R_IN}" |
---|
| 333 | IGCM_debug_Print 3 "R_INIT=${R_INIT}" |
---|
| 334 | R_BC=${config_UserChoices_R_BC:=${R_IN}/BC} |
---|
| 335 | IGCM_debug_Print 3 "R_BC=${R_BC}" |
---|
| 336 | PeriodNb=${config_UserChoices_PeriodNb:=${PeriodNb}} |
---|
| 337 | IGCM_debug_Print 3 "Loop in main Job with ${PeriodNb} period(s)" |
---|
| 338 | |
---|
| 339 | # SD ADA SPECIFIC # |
---|
| 340 | # TO FIX # |
---|
| 341 | #IGCM_sys_TestDirArchive ${R_IN} |
---|
| 342 | #[ $? != 0 ] && IGCM_debug_Exit "IGCM_sys_TestDirArchive" |
---|
| 343 | |
---|
| 344 | if ( ${FirstInitialize} ) ; then |
---|
| 345 | IGCM_sys_MkdirArchive ${R_SAVE} |
---|
| 346 | [ ! ${config_Post_PackFrequency} = NONE ] && IGCM_sys_Mkdir ${R_BUFR} |
---|
| 347 | else |
---|
| 348 | IGCM_sys_TestDirArchive ${R_SAVE} |
---|
| 349 | [ $? != 0 ] && IGCM_debug_Exit "IGCM_sys_TestDirArchive ${R_SAVE}" |
---|
| 350 | |
---|
| 351 | if [ ! ${config_Post_PackFrequency} = NONE ] ; then |
---|
| 352 | IGCM_sys_TestDir ${R_BUFR} |
---|
| 353 | [ $? != 0 ] && IGCM_debug_Exit "IGCM_sys_TestDir ${R_BUFR}" |
---|
| 354 | fi |
---|
| 355 | |
---|
| 356 | # Test state of run in run.card. Will schedule an exit if another process setted it to "Fatal" |
---|
| 357 | IGCM_config_StateCheck |
---|
| 358 | |
---|
| 359 | # And EXIT if not OK |
---|
| 360 | IGCM_debug_Verif_Exit |
---|
| 361 | fi |
---|
| 362 | |
---|
| 363 | #==================================================== |
---|
| 364 | # Experience type : DEB(ug), DEV(elopment), RUN |
---|
| 365 | if [ X${JobType} != XRUN ] ; then |
---|
| 366 | echo |
---|
| 367 | echo "====================================================" |
---|
| 368 | echo "libIGCM JOB is NOT in RUN type mode." |
---|
| 369 | echo "!! OUTPUT files will NOT be PROTECTED !!" |
---|
| 370 | echo "Be carefull : you can ERASE the result of this job !" |
---|
| 371 | |
---|
| 372 | case ${JobType} in |
---|
| 373 | DEB) |
---|
| 374 | echo "DEBUG mode : activation of 'set -vx' mode." |
---|
| 375 | echo "DEBUG mode : no protection for output files." |
---|
| 376 | echo "DEBUG mode : if active force asynchronous rebuild frequency to PeriodLength frequency." |
---|
| 377 | ;; |
---|
| 378 | DEV) |
---|
| 379 | echo "DEVelopment mode : no protection for output files." |
---|
| 380 | echo "DEVelopment mode : if active force asynchronous rebuild frequency to PeriodLength frequency." |
---|
| 381 | ;; |
---|
| 382 | esac |
---|
| 383 | |
---|
| 384 | if ( [ X${config_Post_RebuildFrequency} != XNONE ] && [ ${DRYRUN} -eq 0 ] ) ; then |
---|
| 385 | if [ X${config_Post_RebuildFrequency} != X${config_UserChoices_PeriodLength} ] ; then |
---|
| 386 | echo "------------" |
---|
| 387 | echo "WARNING : Job is NOT in RUN mode then we will force REBUILD Frequency" |
---|
| 388 | echo " to PeriodLength : ${config_UserChoices_PeriodLength}" |
---|
| 389 | echo "------------" |
---|
| 390 | config_Post_RebuildFrequency=${config_UserChoices_PeriodLength} |
---|
| 391 | fi |
---|
| 392 | fi |
---|
| 393 | echo "====================================================" |
---|
| 394 | echo |
---|
| 395 | fi |
---|
| 396 | |
---|
| 397 | IGCM_debug_PopStack "IGCM_config_Initialize" |
---|
| 398 | } |
---|
| 399 | |
---|
| 400 | #=================================== |
---|
| 401 | function IGCM_config_DaysInPeriodLength |
---|
| 402 | { |
---|
| 403 | IGCM_debug_PushStack "IGCM_config_DaysInPeriodLength" |
---|
| 404 | |
---|
| 405 | typeset i |
---|
| 406 | |
---|
| 407 | # Determine number of day(s) in PeriodLength : |
---|
| 408 | case ${config_UserChoices_PeriodLength} in |
---|
| 409 | *Y|*y) |
---|
| 410 | PeriodLengthInYears=$( echo ${config_UserChoices_PeriodLength} | sed -e 's/[yY]//' ) |
---|
| 411 | echo |
---|
| 412 | IGCM_debug_Print 2 "Number of years for PeriodLength : ${PeriodLengthInYears}" |
---|
| 413 | PeriodLengthInDays=0 |
---|
| 414 | i=0 |
---|
| 415 | until [ $i -ge $PeriodLengthInYears ] ; do |
---|
| 416 | (( PeriodLengthInDays = PeriodLengthInDays + $( IGCM_date_DaysInYear $(( year + i )) ) )) |
---|
| 417 | (( i=i+1 )) |
---|
| 418 | done |
---|
| 419 | ;; |
---|
| 420 | *M|*m) |
---|
| 421 | PeriodLengthInMonths=$( echo ${config_UserChoices_PeriodLength} | sed -e 's/[mM]//' ) |
---|
| 422 | echo |
---|
| 423 | IGCM_debug_Print 2 "Number of months for PeriodLength : ${PeriodLengthInMonths}" |
---|
| 424 | PeriodLengthInDays=0 |
---|
| 425 | i=0 |
---|
| 426 | until [ $i -ge $PeriodLengthInMonths ] ; do |
---|
| 427 | if [ $(( 10#${month} + ${i} )) -lt 13 ] ; then |
---|
| 428 | (( PeriodLengthInDays = PeriodLengthInDays + $( IGCM_date_DaysInMonth $year $(( 10#${month} + ${i} )) ) )) |
---|
| 429 | else |
---|
| 430 | (( PeriodLengthInDays = PeriodLengthInDays + $( IGCM_date_DaysInMonth $year $(( 10#${month} + ${i} - 12 )) ) )) |
---|
| 431 | fi |
---|
| 432 | (( i=i+1 )) |
---|
| 433 | done |
---|
| 434 | ;; |
---|
| 435 | *D|*d) |
---|
| 436 | PeriodLengthInMonths=0 |
---|
| 437 | PeriodLengthInDays=$( echo ${config_UserChoices_PeriodLength} | sed -e 's/[dD]//' ) |
---|
| 438 | echo |
---|
| 439 | IGCM_debug_Print 2 "Number of days for PeriodLength : ${PeriodLengthInDays}";; |
---|
| 440 | *) |
---|
| 441 | IGCM_debug_Exit "IGCM_config_DaysInPeriodLength " ${config_UserChoices_PeriodLength} " invalid period length : choose in *Y, *M, *D." |
---|
| 442 | IGCM_debug_Verif_Exit ;; |
---|
| 443 | esac |
---|
| 444 | |
---|
| 445 | IGCM_debug_PopStack "IGCM_config_DaysInPeriodLength" |
---|
| 446 | } |
---|
| 447 | |
---|
| 448 | #=================================== |
---|
| 449 | function IGCM_config_DateCoherency |
---|
| 450 | { |
---|
| 451 | IGCM_debug_PushStack "IGCM_config_DateCoherency" |
---|
| 452 | |
---|
| 453 | echo |
---|
| 454 | IGCM_debug_Print 1 "IGCM_config_DateCoherency" |
---|
| 455 | echo |
---|
| 456 | |
---|
| 457 | typeset Length VerifiedPeriodDateBegin VerifiedPeriodDateEnd |
---|
| 458 | |
---|
| 459 | # check coherency between (PeriodDateBegin, PeriodDateEnd) and (DateBegin, CumulPeriod, PeriodLength) |
---|
| 460 | # DateBegin + CumulPeriod*PeriodLength = PeriodDateBegin |
---|
| 461 | echo |
---|
| 462 | |
---|
| 463 | case ${config_UserChoices_PeriodLength} in |
---|
| 464 | *Y|*y) |
---|
| 465 | Length=$( IGCM_date_DaysInCurrentPeriod ${DateBegin} $(( ${CumulPeriod} * ${PeriodLengthInYears} ))Y ) |
---|
| 466 | ;; |
---|
| 467 | *M|*m) |
---|
| 468 | Length=$( IGCM_date_DaysInCurrentPeriod ${DateBegin} $(( ${CumulPeriod} * ${PeriodLengthInMonths} ))M ) |
---|
| 469 | ;; |
---|
| 470 | *D|*d) |
---|
| 471 | Length=$( IGCM_date_DaysInCurrentPeriod ${DateBegin} $(( ${CumulPeriod} * ${PeriodLengthInDays} ))D ) |
---|
| 472 | ;; |
---|
| 473 | esac |
---|
| 474 | VerifiedPeriodDateEnd=$( IGCM_date_AddDaysToGregorianDate ${DateBegin} ${Length}-1 ) |
---|
| 475 | |
---|
| 476 | if [ ${VerifiedPeriodDateEnd} != ${PeriodDateEnd} ] ; then |
---|
| 477 | IGCM_debug_Print 1 "From run.card PeriodDateEnd is not consistent with DateBegin and CumulPeriod." |
---|
| 478 | IGCM_debug_Print 1 "We have DateBegin = ${DateBegin}" |
---|
| 479 | IGCM_debug_Print 1 "We have CumulPeriod = ${CumulPeriod}" |
---|
| 480 | IGCM_debug_Print 1 "We have PeriodDateEnd = ${PeriodDateEnd}" |
---|
| 481 | IGCM_debug_Print 1 "We have VerifiedPeriodDateEnd = ${VerifiedPeriodDateEnd}" |
---|
| 482 | IGCM_debug_Print 1 "You must have change run.card in an inconsistent way." |
---|
| 483 | |
---|
| 484 | IGCM_debug_Exit "STOP here to avoid further issues." |
---|
| 485 | fi |
---|
| 486 | |
---|
| 487 | # PeriodDateBegin + PeriodLength = PeriodDateEnd |
---|
| 488 | VerifiedPeriodDateBegin=$( IGCM_date_AddDaysToGregorianDate ${VerifiedPeriodDateEnd} $(( ${PeriodLengthInDays} * -1 )) ) |
---|
| 489 | |
---|
| 490 | IGCM_debug_PopStack "IGCM_config_DateCoherency" |
---|
| 491 | } |
---|
| 492 | |
---|
| 493 | #=================================== |
---|
| 494 | function IGCM_config_StateCheck |
---|
| 495 | { |
---|
| 496 | IGCM_debug_PushStack "IGCM_config_StateCheck" |
---|
| 497 | |
---|
| 498 | #Test state of run in run.card |
---|
| 499 | IGCM_card_DefineVariableFromOption ${SUBMIT_DIR}/run.card Configuration PeriodState |
---|
| 500 | |
---|
| 501 | if [ ${run_Configuration_PeriodState} = "Fatal" ] ; then |
---|
| 502 | echo |
---|
| 503 | IGCM_debug_Print 1 "!! Error in run.card with PeriodState : " ${run_Configuration_PeriodState} "!!" |
---|
| 504 | IGCM_debug_Print 1 "Check the overall status of your simulation by visiting this page:" |
---|
| 505 | IGCM_debug_Print 1 "https://hermes.ipsl.upmc.fr/static/simulation.detail.html?uid=${simuid}" |
---|
| 506 | IGCM_debug_Print 1 "Then try running ${libIGCM}/clean_PeriodLenght.job to clean latest failed period" |
---|
| 507 | IGCM_debug_Print 1 "Or try running ${libIGCM}/clean_latestPackperiod.job to clean lastest pack period." |
---|
| 508 | IGCM_debug_Print 1 "Or use ${libIGCM}/purge_simulation.job to delete the full simulation." |
---|
| 509 | IGCM_debug_Exit |
---|
| 510 | elif [ $( echo ${run_Configuration_PeriodState} | grep Fatal | wc -l ) -eq 1 ] ; then |
---|
| 511 | echo |
---|
| 512 | IGCM_debug_Print 1 "!! Error in run.card with PeriodState : " ${run_Configuration_PeriodState} "!!" |
---|
| 513 | IGCM_debug_Print 1 "Compute jobs has been stop because at least the above mentionned post-processing jobs fails." |
---|
| 514 | IGCM_debug_Print 1 "Check post-processing jobs carefully by visiting this page:" |
---|
| 515 | IGCM_debug_Print 1 "https://hermes.ipsl.upmc.fr/static/simulation.detail.html?uid=${simuid}" |
---|
| 516 | IGCM_debug_Print 1 "Please visit that page to see how to fix issues:" |
---|
| 517 | IGCM_debug_Print 1 "https://forge.ipsl.jussieu.fr/igcmg_doc/wiki/DocGmonitor" |
---|
| 518 | IGCM_debug_Print 1 "Then try running ${libIGCM}/clean_PeriodLenght.job to clean latest failed period" |
---|
| 519 | IGCM_debug_Print 1 "Or try running ${libIGCM}/clean_latestPackperiod.job to clean latest pack period." |
---|
| 520 | IGCM_debug_Print 1 "Or use ${libIGCM}/purge_simulation.job to delete the full simulation." |
---|
| 521 | IGCM_debug_Exit |
---|
| 522 | fi |
---|
| 523 | |
---|
| 524 | IGCM_debug_PopStack "IGCM_config_StateCheck" |
---|
| 525 | } |
---|
| 526 | |
---|
| 527 | #=================================== |
---|
| 528 | function IGCM_config_Check |
---|
| 529 | { |
---|
| 530 | IGCM_debug_PushStack "IGCM_config_Check" |
---|
| 531 | |
---|
| 532 | # If one of the following modulo is not zero : |
---|
| 533 | # we will issue an error then explain and exit in |
---|
| 534 | # AA_job IGCM_debug_Verif_Exit call before binary submission |
---|
| 535 | |
---|
| 536 | echo |
---|
| 537 | IGCM_debug_Print 1 "IGCM_config_Check" |
---|
| 538 | echo |
---|
| 539 | |
---|
| 540 | typeset i |
---|
| 541 | |
---|
| 542 | # Check RebuildFrequency against key frequencies : PeriodLength ; PackFrequency ; TimeSeriesFrequency ; SeasonalFrequency |
---|
| 543 | if ( [ ! X${config_Post_RebuildFrequency} = X${NULL_STR} ] && [ ! X${config_Post_RebuildFrequency} = XNONE ] ) ; then |
---|
| 544 | AsynchronousRebuild=true |
---|
| 545 | IGCM_debug_Print 1 "Asynchronous rebuild has been activated." |
---|
| 546 | echo |
---|
| 547 | # modulo (RebuildFrequency and PeriodLength/TimeSeriesFrequency/SeasonalFrequency) must be zero |
---|
| 548 | IGCM_debug_Print 1 "Check coherence between RebuildFrequency and PeriodLength" |
---|
| 549 | IGCM_post_CheckModuloFrequency config_Post_RebuildFrequency config_UserChoices_PeriodLength |
---|
| 550 | IGCM_debug_Print 1 "Check coherence between PackFrequency and RebuildFrequency" |
---|
| 551 | IGCM_post_CheckModuloFrequency config_Post_PackFrequency config_Post_RebuildFrequency |
---|
| 552 | IGCM_debug_Print 1 "Check coherence between TimeSeriesFrequency and RebuildFrequency" |
---|
| 553 | IGCM_post_CheckModuloFrequency config_Post_TimeSeriesFrequency config_Post_RebuildFrequency |
---|
| 554 | IGCM_debug_Print 1 "Check coherence between SeasonalFrequency and RebuildFrequency" |
---|
| 555 | IGCM_post_CheckModuloFrequency config_Post_SeasonalFrequency config_Post_RebuildFrequency |
---|
| 556 | else |
---|
| 557 | AsynchronousRebuild=false |
---|
| 558 | IGCM_debug_Print 1 "Asynchronous rebuild has not been activated" |
---|
| 559 | IGCM_debug_Print 1 "Proceed with standard post-treatment pathway" |
---|
| 560 | echo |
---|
| 561 | #modulo (PeriodLength and TimeSeriesFrequency/SeasonalFrequency) must be zero |
---|
| 562 | IGCM_debug_Print 1 "Check coherence between TimeSeriesFrequency and PeriodLength" |
---|
| 563 | IGCM_post_CheckModuloFrequency config_Post_TimeSeriesFrequency config_UserChoices_PeriodLength |
---|
| 564 | IGCM_debug_Print 1 "Check coherence between SeasonalFrequency and PeriodLength" |
---|
| 565 | IGCM_post_CheckModuloFrequency config_Post_SeasonalFrequency config_UserChoices_PeriodLength |
---|
| 566 | fi |
---|
| 567 | |
---|
| 568 | # Check PackFrequency against other key frequencies |
---|
| 569 | # Modulo (PackFrequency and TimeSeriesFrequency/SeasonalFrequency and PeriodLenght) must be zero |
---|
| 570 | if ( [ ! X${config_Post_PackFrequency} = X${NULL_STR} ] && [ ! X${config_Post_PackFrequency} = XNONE ] ) ; then |
---|
| 571 | Pack=true |
---|
| 572 | # |
---|
| 573 | IGCM_debug_Print 1 "Check coherence between PackFrequency and PeriodLength" |
---|
| 574 | IGCM_post_CheckModuloFrequency config_Post_PackFrequency config_UserChoices_PeriodLength |
---|
| 575 | IGCM_debug_Print 1 "Check coherence between TimeSeriesFrequency and PackFrequency" |
---|
| 576 | IGCM_post_CheckModuloFrequency config_Post_TimeSeriesFrequency config_Post_PackFrequency |
---|
| 577 | IGCM_debug_Print 1 "Check coherence between SeasonalFrequency and PackFrequency" |
---|
| 578 | IGCM_post_CheckModuloFrequency config_Post_SeasonalFrequency config_Post_PackFrequency |
---|
| 579 | else |
---|
| 580 | Pack=false |
---|
| 581 | fi |
---|
| 582 | |
---|
| 583 | # modulo (TimeSeriesFrequency and all Chunck2D) must be zero |
---|
| 584 | NbJob=${#CHUNCK2D_SIZE[@]} |
---|
| 585 | i=0 |
---|
| 586 | until [ $i -ge $NbJob ]; do |
---|
| 587 | value=${CHUNCK2D_SIZE[${i}]} |
---|
| 588 | IGCM_debug_Print 1 "Check coherence between ${CHUNCK2D_NAME[${i}]} Chunck2D frequency and TimeSeriesFrequency" |
---|
| 589 | IGCM_post_CheckModuloFrequency value config_Post_TimeSeriesFrequency |
---|
| 590 | case ${value} in |
---|
| 591 | *Y|*y) ;; |
---|
| 592 | *) |
---|
| 593 | IGCM_debug_Print 1 "All ChunckJob2D frequency must be expressed in year *Y|*y in comp.card" |
---|
| 594 | IGCM_debug_Exit "This will stop the job" ;; |
---|
| 595 | esac |
---|
| 596 | (( i=i+1 )) |
---|
| 597 | done |
---|
| 598 | |
---|
| 599 | # modulo (TimeSeriesFrequency and all Chunck3D) must be zero |
---|
| 600 | NbJob=${#CHUNCK3D_SIZE[@]} |
---|
| 601 | i=0 |
---|
| 602 | until [ $i -ge $NbJob ]; do |
---|
| 603 | value=${CHUNCK3D_SIZE[${i}]} |
---|
| 604 | IGCM_debug_Print 1 "Check coherence between ${CHUNCK3D_NAME[${i}]} Chunck3D frequency and TimeSeriesFrequency" |
---|
| 605 | IGCM_post_CheckModuloFrequency value config_Post_TimeSeriesFrequency |
---|
| 606 | case ${value} in |
---|
| 607 | *Y|*y) ;; |
---|
| 608 | *) |
---|
| 609 | IGCM_debug_Print 1 "All ChunckJob3D frequency must be expressed in year *Y|*y in comp.card" |
---|
| 610 | IGCM_debug_Exit "This will stop the job" ;; |
---|
| 611 | esac |
---|
| 612 | (( i=i+1 )) |
---|
| 613 | done |
---|
| 614 | |
---|
| 615 | # check to be sure there is enough space on temporary filesystems to run |
---|
| 616 | echo |
---|
| 617 | IGCM_debug_Print 1 "Check if there is enough space on temporary filesystem" |
---|
| 618 | IGCM_sys_check_quota |
---|
| 619 | |
---|
| 620 | # check to be sure that RUN_DIR_PATH, that will be removed is not pointing to an important directory |
---|
| 621 | echo |
---|
| 622 | IGCM_debug_Print 1 "Check where RUN_DIR_PATH variable is pointing to" |
---|
| 623 | IGCM_sys_check_path |
---|
| 624 | |
---|
| 625 | |
---|
| 626 | IGCM_debug_PopStack "IGCM_config_Check" |
---|
| 627 | } |
---|
| 628 | |
---|
| 629 | #=================================== |
---|
| 630 | function IGCM_config_ConfigureExecution |
---|
| 631 | { |
---|
| 632 | IGCM_debug_PushStack " IGCM_config_ConfigureExecution" |
---|
| 633 | |
---|
| 634 | #echo |
---|
| 635 | IGCM_debug_Print 1 " IGCM_config_ConfigureExecution" |
---|
| 636 | #echo |
---|
| 637 | |
---|
| 638 | typeset ExeNameIn ExeNameFirst CompNameFirst configCardPath comp i |
---|
| 639 | typeset tempvar tempvarMPI tempvarNOD NbElts NbExec |
---|
| 640 | |
---|
| 641 | # config.card path |
---|
| 642 | configCardPath=$1 |
---|
| 643 | |
---|
| 644 | coreNumber=0 |
---|
| 645 | mpiTasks=0 |
---|
| 646 | openMPthreads=0 |
---|
| 647 | NbExec=0 |
---|
| 648 | |
---|
| 649 | OK_PARA_MPI=false |
---|
| 650 | OK_PARA_OMP=false |
---|
| 651 | OK_PARA_NOD=false |
---|
| 652 | OK_PARA_MPMD=false |
---|
| 653 | |
---|
| 654 | for comp in ${config_ListOfComponents[*]} ; do |
---|
| 655 | |
---|
| 656 | # Manage component executable |
---|
| 657 | IGCM_card_DefineArrayFromOption ${configCardPath} Executable ${comp} |
---|
| 658 | |
---|
| 659 | eval ExeNameIn=\${config_Executable_${comp}[0]} |
---|
| 660 | |
---|
| 661 | # NO order in config.card for parallelized values ! |
---|
| 662 | # just use suffix : MPI , OMP and NOD (for number of NODes.) |
---|
| 663 | |
---|
| 664 | # NOD is the number of NODes allocated |
---|
| 665 | eval ${comp}_PROC_NOD=0 |
---|
| 666 | |
---|
| 667 | # MPI is the number of MPI processus per nodes |
---|
| 668 | eval ${comp}_PROC_MPI=0 |
---|
| 669 | |
---|
| 670 | # OMP is the number of OpenMP threads per MPI processus |
---|
| 671 | eval ${comp}_PROC_OMP=0 |
---|
| 672 | |
---|
| 673 | # DEP is the factor to increase the number of cores per process |
---|
| 674 | eval ${comp}_PROC_DEP=0 |
---|
| 675 | |
---|
| 676 | # DEDICATED is the flag to activate the use of dedicated node for XIOS server only |
---|
| 677 | eval ${comp}_OK_DEDICATED=0 |
---|
| 678 | |
---|
| 679 | # Only if we really have an executable for the component : |
---|
| 680 | if ( [ "X${ExeNameIn}" != X\"\" ] && [ "X${ExeNameIn}" != "Xinca.dat" ] ) ; then |
---|
| 681 | |
---|
| 682 | IGCM_debug_Print 1 ${comp} |
---|
| 683 | |
---|
| 684 | # Keep the first executable found and the first CompName |
---|
| 685 | eval ExeNameFirst=${ExeNameIn} |
---|
| 686 | CompNameFirst=${comp} |
---|
| 687 | |
---|
| 688 | # Are we a second executable? |
---|
| 689 | (( NbExec = NbExec + 1 )) |
---|
| 690 | |
---|
| 691 | # set 1 MPI task, 1 OpenMP thread and 1 node as default |
---|
| 692 | eval ${comp}_PROC_MPI=1 |
---|
| 693 | eval ${comp}_PROC_OMP=1 |
---|
| 694 | eval ${comp}_PROC_NOD=1 |
---|
| 695 | eval ${comp}_PROC_DEP=1 |
---|
| 696 | |
---|
| 697 | eval NbElts=\${#config_Executable_${comp}[@]} |
---|
| 698 | if [ ${NbElts} -gt 2 ] ; then |
---|
| 699 | # |
---|
| 700 | # CURRENT METHOD TO SPECIFY MPI AND OMP RESSOURCES |
---|
| 701 | # |
---|
| 702 | i=2 |
---|
| 703 | while [ ${i} -lt ${NbElts} ] ; do |
---|
| 704 | eval tempvar=\${config_Executable_${comp}[${i}]} |
---|
| 705 | IGCM_debug_Print 2 ${tempvar} |
---|
| 706 | |
---|
| 707 | if [ X${tempvar} = X ] ; then |
---|
| 708 | IGCM_debug_Print 2 "Error reading MPI/OMP parameters !!!" |
---|
| 709 | IGCM_debug_Exit "Check your config.card. Exit now" |
---|
| 710 | IGCM_debug_Verif_Exit |
---|
| 711 | fi |
---|
| 712 | |
---|
| 713 | case ${tempvar} in |
---|
| 714 | *[mM][pP][iI]*) |
---|
| 715 | # Read MPI parameter for composante |
---|
| 716 | eval ${comp}_PROC_MPI=$( echo ${tempvar} | tr '[a-z]' '[A-Z]' | sed -e "s/MPI//" ) |
---|
| 717 | OK_PARA_MPI=true;; |
---|
| 718 | *[oO][mM][pP]*) |
---|
| 719 | # Read OMP parameter for composante |
---|
| 720 | eval ${comp}_PROC_OMP=$( echo ${tempvar} | tr '[a-z]' '[A-Z]' | sed -e "s/OMP//" ) |
---|
| 721 | ;; |
---|
| 722 | *[nN][oO][dD]*) |
---|
| 723 | # Read NOD (NumBer of Nodes) parameter for composante |
---|
| 724 | eval ${comp}_PROC_NOD=$( echo ${tempvar} | tr '[a-z]' '[A-Z]' | sed -e "s/NOD//" ) |
---|
| 725 | OK_PARA_NOD=true |
---|
| 726 | OK_PARA_MPI=true |
---|
| 727 | ;; |
---|
| 728 | *[dD][eE][pP]*) |
---|
| 729 | # Read DEP parameter for composante |
---|
| 730 | eval ${comp}_PROC_DEP=$( echo ${tempvar} | tr '[a-z]' '[A-Z]' | sed -e "s/DEP//" ) |
---|
| 731 | ;; |
---|
| 732 | *[dD][eE][dD][iI][cC][aA][tT][eE][dD]*) |
---|
| 733 | # Read DEDICATED parameter for composante |
---|
| 734 | eval ${comp}_OK_DEDICATED=1 |
---|
| 735 | esac |
---|
| 736 | (( i = i + 1 )) |
---|
| 737 | done |
---|
| 738 | else |
---|
| 739 | # |
---|
| 740 | # BACKWARD COMPATIBILITY NOT SUPPORTED ANYMORE |
---|
| 741 | # |
---|
| 742 | IGCM_debug_Exit "You are using a deprecated ressources specification mechanism in your config.card" |
---|
| 743 | IGCM_debug_Exit "Please check : https://forge.ipsl.jussieu.fr/igcmg_doc/wiki/DocEsetup#ThesectionExecutable" |
---|
| 744 | IGCM_debug_Exit "Please modify ${configCardPath}" |
---|
| 745 | exit |
---|
| 746 | fi |
---|
| 747 | if [ ${comp}_PROC_NOD -gt 1 ] ; then |
---|
| 748 | if ( [ ${comp}_PROC_MPI -gt 1 ] && [ ${comp}_PROC_OMP -gt 1 ] ) ; then |
---|
| 749 | IGCM_debug_Print 2 "Error using MPI/OMP/NOD parameters !!!" |
---|
| 750 | IGCM_debug_Exit "It is not allowed to use MPI and OMP and NOD parameters for the same component" |
---|
| 751 | IGCM_debug_Exit "Check your config.card. Exit now" |
---|
| 752 | IGCM_debug_Verif_Exit |
---|
| 753 | fi |
---|
| 754 | if [ "${comp}" != "IOS" ] ; then |
---|
| 755 | IGCM_debug_Print 2 "Error using NOD parameter !!!" |
---|
| 756 | IGCM_debug_Exit "NOD parameter is only available for IOS component " |
---|
| 757 | IGCM_debug_Exit "Check your config.card. Exit now" |
---|
| 758 | IGCM_debug_Verif_Exit |
---|
| 759 | fi |
---|
| 760 | fi |
---|
| 761 | if ( [ ${comp}_OK_DEDICATED -eq 1 ] && [ "${comp}" != "IOS" ] ) ; then |
---|
| 762 | IGCM_debug_Print 2 "Error using DEDICATED parameter !!!" |
---|
| 763 | IGCM_debug_Exit "DEDICATED parameter is only available for IOS component " |
---|
| 764 | IGCM_debug_Exit "Check your config.card. Exit now" |
---|
| 765 | IGCM_debug_Verif_Exit |
---|
| 766 | fi |
---|
| 767 | |
---|
| 768 | eval tempvarMPI=\${${comp}_PROC_MPI} |
---|
| 769 | eval tempvarNOD=\${${comp}_PROC_NOD} |
---|
| 770 | eval tempvarOMP=\${${comp}_PROC_OMP} |
---|
| 771 | eval tempvarDEP=\${${comp}_PROC_DEP} |
---|
| 772 | |
---|
| 773 | # set OMP mode if more than 1 OMP thread. |
---|
| 774 | [ ${tempvarOMP} -ge 2 ] && OK_PARA_OMP=true |
---|
| 775 | |
---|
| 776 | # Number of OMP threads |
---|
| 777 | [ ${openMPthreads} -lt ${tempvarOMP} ] && openMPthreads=${tempvarOMP} |
---|
| 778 | |
---|
| 779 | # SUM UP NUMBER OF CORES |
---|
| 780 | if [ ${comp}_PROC_NOD -gt 1 ] ; then |
---|
| 781 | (( coreNumber = coreNumber + tempvarNOD * NB_CORE_PER_NODE )) |
---|
| 782 | else |
---|
| 783 | (( coreNumber = coreNumber + tempvarMPI * tempvarNOD * tempvarOMP * tempvarDEP )) |
---|
| 784 | fi |
---|
| 785 | # SUM UP NUMBER OF MPI TASKS |
---|
| 786 | (( mpiTasks = mpiTasks + tempvarMPI * tempvarNOD )) |
---|
| 787 | fi |
---|
| 788 | done |
---|
| 789 | |
---|
| 790 | # MANDATORY FOR THE OPA9.DRIVER. USED TO EDIT OPA NAMELIST |
---|
| 791 | # WE SHOULD PLANIFY NUM_PROC_??? DEPRECATION |
---|
| 792 | NUM_PROC_CPL=${CPL_PROC_MPI} |
---|
| 793 | NUM_PROC_OCE=${OCE_PROC_MPI} |
---|
| 794 | NUM_PROC_ATM=${ATM_PROC_MPI} |
---|
| 795 | |
---|
| 796 | # set MPMD mode if more than 2 executable names. |
---|
| 797 | [ ${NbExec} -ge 2 ] && OK_PARA_MPMD=true |
---|
| 798 | |
---|
| 799 | # Define the execution type we are running in |
---|
| 800 | if ( ${OK_PARA_MPMD} ) ; then |
---|
| 801 | if ( ${OK_PARA_MPI} ) ; then |
---|
| 802 | # MPMD always implies MPI |
---|
| 803 | executionType=1 |
---|
| 804 | fi |
---|
| 805 | if ( ${OK_PARA_OMP} ) ; then |
---|
| 806 | # MPMD + MPI/OMP |
---|
| 807 | executionType=2 |
---|
| 808 | fi |
---|
| 809 | else |
---|
| 810 | if ( ( ${OK_PARA_MPI} ) && ( ${OK_PARA_OMP} ) ) ; then |
---|
| 811 | # SPMD + MPI/OMP |
---|
| 812 | executionType=3 |
---|
| 813 | elif ( ( ${OK_PARA_MPI} ) && ( ! ${OK_PARA_OMP} ) ) ; then |
---|
| 814 | # SPMD + MPI only |
---|
| 815 | executionType=4 |
---|
| 816 | elif ( ( ! ${OK_PARA_MPI} ) && ( ${OK_PARA_OMP} ) ) ; then |
---|
| 817 | # SPMD + OMP only |
---|
| 818 | executionType=5 |
---|
| 819 | elif ( ( ! ${OK_PARA_MPI} ) && ( ! ${OK_PARA_OMP} ) ) ; then |
---|
| 820 | # SEQUENTIAL THEN |
---|
| 821 | executionType=6 |
---|
| 822 | coreNumber=1 |
---|
| 823 | fi |
---|
| 824 | fi |
---|
| 825 | |
---|
| 826 | IGCM_debug_Print 1 "MPI/OMP treatment coreNumber = ${coreNumber}" |
---|
| 827 | IGCM_debug_Print 1 "MPI/OMP treatment mpiTasks = ${mpiTasks}" |
---|
| 828 | IGCM_debug_Print 1 "MPI/OMP treatment openMPthreads = ${openMPthreads}" |
---|
| 829 | IGCM_debug_Print 1 "MPI/OMP treatment executionType = ${executionType}" |
---|
| 830 | |
---|
| 831 | IGCM_debug_PopStack "IGCM_config_ConfigureExecution" |
---|
| 832 | } |
---|
| 833 | |
---|
| 834 | #=================================== |
---|
| 835 | function IGCM_config_PeriodStart |
---|
| 836 | { |
---|
| 837 | IGCM_debug_PushStack "IGCM_config_PeriodStart" |
---|
| 838 | |
---|
| 839 | echo |
---|
| 840 | IGCM_debug_Print 1 "IGCM_config_PeriodStart" |
---|
| 841 | echo |
---|
| 842 | |
---|
| 843 | if ( ${FirstInitialize} ) ; then |
---|
| 844 | #================================================# |
---|
| 845 | # Initialize date/period information # |
---|
| 846 | #================================================# |
---|
| 847 | |
---|
| 848 | IGCM_date_GetYearMonthDay ${DateBegin} year month day |
---|
| 849 | IGCM_config_DaysInPeriodLength |
---|
| 850 | |
---|
| 851 | PeriodDateBegin=${DateBegin} |
---|
| 852 | PeriodDateEnd=$( IGCM_date_AddDaysToGregorianDate ${DateBegin} $(( ${PeriodLengthInDays} - 1 )) ) |
---|
| 853 | CumulPeriod=1 |
---|
| 854 | |
---|
| 855 | #=================================================# |
---|
| 856 | # Write updated run.card # |
---|
| 857 | #=================================================# |
---|
| 858 | |
---|
| 859 | #Correct run.card Configuration for this period |
---|
| 860 | IGCM_card_WriteOption ${SUBMIT_DIR}/run.card Configuration PeriodDateBegin ${PeriodDateBegin} |
---|
| 861 | IGCM_card_WriteOption ${SUBMIT_DIR}/run.card Configuration PeriodDateEnd ${PeriodDateEnd} |
---|
| 862 | IGCM_card_WriteOption ${SUBMIT_DIR}/run.card Configuration CumulPeriod ${CumulPeriod} |
---|
| 863 | if [ X$( grep "SubmitPath" ${SUBMIT_DIR}/run.card ) != X ] ; then |
---|
| 864 | IGCM_card_WriteOption ${SUBMIT_DIR}/run.card Configuration SubmitPath ${SUBMIT_DIR} |
---|
| 865 | fi |
---|
| 866 | |
---|
| 867 | IGCM_card_WriteOption ${SUBMIT_DIR}/run.card Configuration PeriodState "Running" |
---|
| 868 | |
---|
| 869 | else |
---|
| 870 | #================================================# |
---|
| 871 | # The file run.card allready exist # |
---|
| 872 | #================================================# |
---|
| 873 | |
---|
| 874 | # Test state of run in run.card. Will schedule an exit if another process setted it to "Fatal" |
---|
| 875 | IGCM_config_StateCheck |
---|
| 876 | # And EXIT if not OK |
---|
| 877 | IGCM_debug_Verif_Exit |
---|
| 878 | |
---|
| 879 | #===================================# |
---|
| 880 | # Read updated run.card # |
---|
| 881 | #===================================# |
---|
| 882 | |
---|
| 883 | IGCM_card_DefineVariableFromOption ${SUBMIT_DIR}/run.card Configuration PeriodDateBegin |
---|
| 884 | IGCM_card_DefineVariableFromOption ${SUBMIT_DIR}/run.card Configuration PeriodDateEnd |
---|
| 885 | IGCM_card_DefineVariableFromOption ${SUBMIT_DIR}/run.card Configuration CumulPeriod |
---|
| 886 | |
---|
| 887 | PeriodDateBegin=$( IGCM_date_ConvertFormatToGregorian ${run_Configuration_PeriodDateBegin} ) |
---|
| 888 | PeriodDateEnd=$( IGCM_date_ConvertFormatToGregorian ${run_Configuration_PeriodDateEnd} ) |
---|
| 889 | CumulPeriod=${run_Configuration_CumulPeriod} |
---|
| 890 | |
---|
| 891 | LastPeriodDateEnd=$( IGCM_date_AddDaysToGregorianDate $( IGCM_date_ConvertFormatToGregorian ${PeriodDateBegin} ) -1 ) |
---|
| 892 | |
---|
| 893 | if [ ${Period} = 1 ]; then |
---|
| 894 | # save last Job output and current run.card |
---|
| 895 | typeset Potential |
---|
| 896 | IGCM_sys_Cd ${SUBMIT_DIR} |
---|
| 897 | # |
---|
| 898 | IGCM_debug_Print 2 "Save previous ksh job output" |
---|
| 899 | for Potential in $( ls ${Script_Output_Prefix}_${config_UserChoices_JobName}.[0-9][0-9][0-9][0-9][0-9][0-9] ) ; do |
---|
| 900 | if [ X${Pack} = Xtrue ] ; then |
---|
| 901 | ( IGCM_sys_TestFileBuffer ${R_BUF_KSH}/${Potential} ) || IGCM_sys_Cp ${Potential} ${R_BUF_KSH}/${Potential}.$$ |
---|
| 902 | else |
---|
| 903 | ( IGCM_sys_TestFileArchive ${R_OUT_KSH}/${Potential} ) || IGCM_sys_Put_Out ${Potential} ${R_OUT_KSH}/${Potential}.$$ NOMOVE |
---|
| 904 | IGCM_debug_Print 1 "Save of previous ksh job output is not done for Pack=false" |
---|
| 905 | fi |
---|
| 906 | done |
---|
| 907 | |
---|
| 908 | # |
---|
| 909 | IGCM_debug_Print 2 "Save current run.card" |
---|
| 910 | IGCM_card_CheckConflict run.card |
---|
| 911 | |
---|
| 912 | if [ X${Pack} = Xtrue ] ; then |
---|
| 913 | IGCM_sys_Cp ${SUBMIT_DIR}/run.card ${R_BUF_KSH}/run.card |
---|
| 914 | else |
---|
| 915 | IGCM_sys_Put_Out ${SUBMIT_DIR}/run.card ${R_OUT_KSH}/run.card NOMOVE |
---|
| 916 | IGCM_debug_Print 1 "Save of run.card is not done for Pack=false" |
---|
| 917 | fi |
---|
| 918 | # |
---|
| 919 | IGCM_sys_Cd ${RUN_DIR} |
---|
| 920 | else |
---|
| 921 | unset FileToBeDeleted |
---|
| 922 | fi |
---|
| 923 | |
---|
| 924 | # Determine number of day(s) in PeriodLength |
---|
| 925 | IGCM_date_GetYearMonthDay $PeriodDateBegin year month day |
---|
| 926 | IGCM_config_DaysInPeriodLength |
---|
| 927 | |
---|
| 928 | # Check coherency between (PeriodDateBegin, PeriodDateEnd) and (DateBegin, CumulPeriod, PeriodLength) |
---|
| 929 | IGCM_config_DateCoherency |
---|
| 930 | # And EXIT if not OK |
---|
| 931 | IGCM_debug_Verif_Exit |
---|
| 932 | |
---|
| 933 | # Test state of run in run.card. Will schedule an exit if another process setted it to "Fatal" |
---|
| 934 | IGCM_config_StateCheck |
---|
| 935 | # And EXIT if not OK |
---|
| 936 | IGCM_debug_Verif_Exit |
---|
| 937 | |
---|
| 938 | # We can say we are "Running" now. |
---|
| 939 | IGCM_card_WriteOption ${SUBMIT_DIR}/run.card Configuration PeriodState "Running" |
---|
| 940 | fi |
---|
| 941 | |
---|
| 942 | # BEGIN: SHOULD GO IN A FUNCTION FROM libIGCM_date.ksh |
---|
| 943 | # Compute year_m1 and year_p1 (year minus 1Y and year plus 1Y) |
---|
| 944 | year_m1=$(( year - 1 )) |
---|
| 945 | year_p1=$(( year + 1 )) |
---|
| 946 | # Compute month_m1 (month minus 1M) |
---|
| 947 | # Compute yyyymm_m1 (yyyymm minus 1M) |
---|
| 948 | month_m1=$(( 10#${month} - 1 )) |
---|
| 949 | if [ ${month_m1} = 0 ]; then |
---|
| 950 | month_m1=12 |
---|
| 951 | yyyymm_m1=${year_m1}12 |
---|
| 952 | elif [ ${month_m1} -le 9 ]; then |
---|
| 953 | month_m1=0${month_m1} |
---|
| 954 | yyyymm_m1=${year}${month_m1} |
---|
| 955 | else |
---|
| 956 | yyyymm_m1=${year}${month_m1} |
---|
| 957 | fi |
---|
| 958 | # Compute month_p1 (month plus 1M) |
---|
| 959 | # Compute yyyymm_p1 (yyyymm plus 1M) |
---|
| 960 | month_p1=$(( 10#${month} + 1 )) |
---|
| 961 | if [ ${month_p1} = 13 ]; then |
---|
| 962 | month_p1=01 |
---|
| 963 | yyyymm_p1=${year_p1}01 |
---|
| 964 | elif [ ${month_p1} -le 9 ]; then |
---|
| 965 | month_p1=0${month_p1} |
---|
| 966 | yyyymm_p1=${year}${month_p1} |
---|
| 967 | else |
---|
| 968 | yyyymm_p1=${year}${month_p1} |
---|
| 969 | fi |
---|
| 970 | |
---|
| 971 | |
---|
| 972 | #===================================================================# |
---|
| 973 | # Calculate CyclicYear to be used for looping over a given forcing # |
---|
| 974 | # period. Add CyclicBegin and CyclicEnd in config.card UserChoices. # |
---|
| 975 | #===================================================================# |
---|
| 976 | |
---|
| 977 | # To use the variable CyclicYear, one must add in config.card CyclicBegin and CyclicEnd. |
---|
| 978 | # CyclicBegin is the first year in the cycle. CyclicEnd is the last year included in the cycle. |
---|
| 979 | if ( [ ! X${config_UserChoices_CyclicBegin} = X ] && [ ! X${config_UserChoices_CyclicEnd} = X ] ) ; then |
---|
| 980 | CycleNb=$(( ${config_UserChoices_CyclicEnd} - ${config_UserChoices_CyclicBegin} + 1 )) |
---|
| 981 | #CyclicYear_p1= #NOTDEFINED |
---|
| 982 | |
---|
| 983 | # For current year |
---|
| 984 | yeartmp=$year |
---|
| 985 | diffy=$(( $yeartmp - ${config_UserChoices_CyclicBegin} )) |
---|
| 986 | while [ $diffy -lt 0 ] ; do |
---|
| 987 | yeartmp=$(( ${yeartmp} + ${CycleNb} )) |
---|
| 988 | diffy=$(( $yeartmp - ${config_UserChoices_CyclicBegin} )) |
---|
| 989 | done |
---|
| 990 | CyclicYear=$(( ( ${diffy} % ${CycleNb} ) + ${config_UserChoices_CyclicBegin} )) |
---|
| 991 | |
---|
| 992 | # For next coming year |
---|
| 993 | CyclicYear_p1=$(( CyclicYear + 1 )) |
---|
| 994 | |
---|
| 995 | # For previous year |
---|
| 996 | CyclicYear_m1=$(( CyclicYear - 1 )) |
---|
| 997 | |
---|
| 998 | IGCM_debug_Print 1 "CyclicYear = ${CyclicYear}, current year=$year" |
---|
| 999 | IGCM_debug_Print 1 "CyclicYear_p1 = ${CyclicYear_p1}, CyclicYear_m1 = ${CyclicYear_m1} " |
---|
| 1000 | else |
---|
| 1001 | CyclicYear="ERROR_CyclicYear_Variable_Not_Defined" |
---|
| 1002 | CyclicYear_p1="ERROR_CyclicYear_p1_Variable_Not_Defined" |
---|
| 1003 | IGCM_debug_Print 1 "CyclicYear wont be use without adding CyclicBegin and CyclicEnd in config.card" |
---|
| 1004 | fi |
---|
| 1005 | |
---|
| 1006 | # END: SHOULD GO IN A FUNCTION FROM libIGCM_date.ksh |
---|
| 1007 | |
---|
| 1008 | #===================================================================# |
---|
| 1009 | # Prepare variables available for ${COMP}.card and ${COMP}.driver # |
---|
| 1010 | # But available to any son functions # |
---|
| 1011 | #===================================================================# |
---|
| 1012 | |
---|
| 1013 | # Period Length In Days between DateBegin and DateCurrent (at end of period == PeriodDateEnd !) |
---|
| 1014 | (( SimulationLengthInDays = $( IGCM_date_DaysBetweenGregorianDate ${PeriodDateEnd} ${DateBegin} ) + 1 )) |
---|
| 1015 | |
---|
| 1016 | # Debug Print : |
---|
| 1017 | echo |
---|
| 1018 | IGCM_debug_Print 1 "IGCM_config_PeriodStart : Before Execution" |
---|
| 1019 | IGCM_debug_Print 1 "Year of simulation : ${year}" |
---|
| 1020 | IGCM_debug_Print 1 "Month of simulation : ${month}" |
---|
| 1021 | IGCM_debug_Print 1 "PeriodLengthInDays : ${PeriodLengthInDays}" |
---|
| 1022 | IGCM_debug_Print 1 "PeriodDateBegin : ${PeriodDateBegin}" |
---|
| 1023 | IGCM_debug_Print 1 "PeriodDateEnd : ${PeriodDateEnd}" |
---|
| 1024 | IGCM_debug_Print 1 "SimulationLengthInDays : ${SimulationLengthInDays}" |
---|
| 1025 | IGCM_debug_Print 1 "ExperienceLengthInDays : ${ExperienceLengthInDays}" |
---|
| 1026 | |
---|
| 1027 | #================================================================# |
---|
| 1028 | # Prepare variables available for comp_finalyze # |
---|
| 1029 | #================================================================# |
---|
| 1030 | |
---|
| 1031 | # Period for save files |
---|
| 1032 | DatesPeriod=${PeriodDateBegin}_${PeriodDateEnd} |
---|
| 1033 | |
---|
| 1034 | # Prefix for save files of this period |
---|
| 1035 | PREFIX=${config_UserChoices_JobName}_${DatesPeriod} |
---|
| 1036 | |
---|
| 1037 | # List of files that will be deleted in RUN_DIR after run |
---|
| 1038 | [ -f stack ] && FileToBeDeleted[0]="stack" |
---|
| 1039 | |
---|
| 1040 | # Test if the same run as already been saved : |
---|
| 1041 | if [ X${JobType} = XRUN ] ; then |
---|
| 1042 | if [ ${DRYRUN} -le 0 ] ; then |
---|
| 1043 | if ( IGCM_sys_TestFileBuffer ${R_BUF_KSH}/${PREFIX}_${Exe_Output} ) ; then |
---|
| 1044 | IGCM_debug_Exit "IGCM_config_PeriodStart" "You are currently re-running an old job." |
---|
| 1045 | IGCM_debug_Print 1 "Because of readonly permissions, you can't re-run a job when saved files" |
---|
| 1046 | IGCM_debug_Print 1 " are still in the ARCHIVE directory. You must deleted those files, or " |
---|
| 1047 | IGCM_debug_Print 1 " the whole ${R_SAVE} tree. See different clean_*.job in ${libIGCM} directory." |
---|
| 1048 | IGCM_debug_Print 1 " This exit has been initiated because at least ${R_BUF_KSH}/${PREFIX}_${Exe_Output} exists." |
---|
| 1049 | IGCM_debug_Verif_Exit |
---|
| 1050 | fi |
---|
| 1051 | fi |
---|
| 1052 | else |
---|
| 1053 | if ( IGCM_sys_TestFileBuffer ${R_BUF_KSH}/${PREFIX}_${Exe_Output} ) ; then |
---|
| 1054 | IGCM_debug_Print 1 "IGCM_config_PeriodStart" "RErun an old job. Allowed in DEBUG or DEV mode." |
---|
| 1055 | fi |
---|
| 1056 | fi |
---|
| 1057 | |
---|
| 1058 | #================================================================# |
---|
| 1059 | # Prepare variables available for binary execution # |
---|
| 1060 | # Call function for creation of run script # |
---|
| 1061 | # Only done once per job # |
---|
| 1062 | #================================================================# |
---|
| 1063 | |
---|
| 1064 | if [ ${Period} -eq 1 ]; then |
---|
| 1065 | # Define the execution context (MPMD, SPMD, MPI/OMP ...) |
---|
| 1066 | IGCM_config_ConfigureExecution ${SUBMIT_DIR}/config.card |
---|
| 1067 | # Create the execution script for the current context |
---|
| 1068 | IGCM_sys_build_execution_scripts |
---|
| 1069 | fi |
---|
| 1070 | |
---|
| 1071 | ExecutionFail=false |
---|
| 1072 | |
---|
| 1073 | # Update the rabbitMQ queue |
---|
| 1074 | IGCM_debug_BigBro_Update |
---|
| 1075 | |
---|
| 1076 | IGCM_debug_PopStack "IGCM_config_PeriodStart" |
---|
| 1077 | } |
---|
| 1078 | |
---|
| 1079 | #=================================== |
---|
| 1080 | function IGCM_config_SaveSourceModifications |
---|
| 1081 | { |
---|
| 1082 | IGCM_debug_PushStack "IGCM_config_SaveSourceModifications" |
---|
| 1083 | |
---|
| 1084 | typeset ExeOutDateMax listVarEnv |
---|
| 1085 | ExeOutDateMax=$1 |
---|
| 1086 | |
---|
| 1087 | listVarEnv="ExeOutDateMax,R_OUT_EXE,PREFIX,SUBMIT_DIR" |
---|
| 1088 | IGCM_sys_RshMaster "\ |
---|
| 1089 | . ${libIGCM}/libIGCM_sys/libIGCM_sys.ksh; \ |
---|
| 1090 | export ExeOutDateMax=${ExeOutDateMax};\ |
---|
| 1091 | export R_OUT_EXE=${R_OUT_EXE};\ |
---|
| 1092 | export PREFIX=${PREFIX};\ |
---|
| 1093 | export SUBMIT_DIR=${SUBMIT_DIR};\ |
---|
| 1094 | export listVarEnv=${listVarEnv};\ |
---|
| 1095 | Script_Output=out_SaveSourceModifications;\ |
---|
| 1096 | IGCM_sys_Qsub ${libIGCM}/SaveSourceModifications.job ${ExeOutDateMax} ${R_OUT_EXE} ${PREFIX} ${SUBMIT_DIR}" |
---|
| 1097 | |
---|
| 1098 | IGCM_debug_PopStack "IGCM_config_SaveSourceModifications" |
---|
| 1099 | } |
---|
| 1100 | |
---|
| 1101 | #=================================== |
---|
| 1102 | function IGCM_config_PeriodEnd |
---|
| 1103 | { |
---|
| 1104 | IGCM_debug_PushStack "IGCM_config_PeriodEnd" |
---|
| 1105 | |
---|
| 1106 | echo |
---|
| 1107 | IGCM_debug_Print 1 "IGCM_config_PeriodEnd" |
---|
| 1108 | echo |
---|
| 1109 | |
---|
| 1110 | if [ ${DRYRUN} -le 1 ] ; then |
---|
| 1111 | |
---|
| 1112 | IGCM_debug_Print 1 "Check components binary : size and creation date" |
---|
| 1113 | |
---|
| 1114 | typeset LS_comp LS_bin ExeDate ExeCpuLog NextExeSize LastCompExeSize |
---|
| 1115 | typeset comp i |
---|
| 1116 | typeset ExeNameIn ExeNameOut UpdateExe ExeSecDateMax |
---|
| 1117 | |
---|
| 1118 | #==================================# |
---|
| 1119 | # Get last Exe Size # |
---|
| 1120 | #==================================# |
---|
| 1121 | |
---|
| 1122 | (( i=0 )) |
---|
| 1123 | if ( ${FirstInitialize} ) ; then |
---|
| 1124 | run_Log_LastExeSize="" |
---|
| 1125 | for comp in ${config_ListOfComponents[*]} ; do |
---|
| 1126 | run_Log_LastExeSize[$i]=0 |
---|
| 1127 | (( i=i+1 )) |
---|
| 1128 | done |
---|
| 1129 | else |
---|
| 1130 | IGCM_card_DefineArrayFromOption ${SUBMIT_DIR}/run.card Log LastExeSize |
---|
| 1131 | fi |
---|
| 1132 | #==================================# |
---|
| 1133 | # And Build ExeDate # |
---|
| 1134 | #==================================# |
---|
| 1135 | |
---|
| 1136 | # ExeDate = ATM_Jun_12_09:34-SRF_Jun_12_09:34-OCE_Jun_12_09:34-ICE_Jun_12_09:34-CPL_Jun_12_09:33 |
---|
| 1137 | # Would be nice to have next line but no way to format ls output (need to ls -l --time-style "+%Y-%m-%dT%H:%M") |
---|
| 1138 | # ExeDate = ATM_2009-06-12T09:34+SRF_2009-06-12T09:34+OCE_2009-06-12T09:34+ICE_2009-06-12T09:34+CPL_2009-06-12T09:34 |
---|
| 1139 | ExeDate="" |
---|
| 1140 | NextExeSize="( " |
---|
| 1141 | (( i=0 )) |
---|
| 1142 | UpdateExe=false |
---|
| 1143 | (( ExeSecDateMax = 0 )) |
---|
| 1144 | for comp in ${config_ListOfComponents[*]} ; do |
---|
| 1145 | |
---|
| 1146 | IGCM_debug_Print 3 ${comp} |
---|
| 1147 | |
---|
| 1148 | eval ExeNameIn=\${config_Executable_${comp}[0]} |
---|
| 1149 | eval ExeNameOut=\${config_Executable_${comp}[1]} |
---|
| 1150 | # Only if we really have an executable for the component : |
---|
| 1151 | if [ X${ExeNameIn} = X\"\" ] ; then |
---|
| 1152 | # If there is no exe file for this component |
---|
| 1153 | (( ExeSize=0 )) |
---|
| 1154 | else |
---|
| 1155 | eval ExeNameIn=${ExeNameIn} |
---|
| 1156 | LS_bin=${R_EXE}/${ExeNameIn} |
---|
| 1157 | IGCM_sys_FileSize ${LS_bin} ExeSize |
---|
| 1158 | |
---|
| 1159 | set +A LS_comp -- $( LC_TIME=en_US ls -l ${LS_bin} ) |
---|
| 1160 | if [ X${ExeDate} = X ] ; then |
---|
| 1161 | # First component exe date |
---|
| 1162 | ExeDate=${comp}_${LS_comp[5]}_${LS_comp[6]} |
---|
| 1163 | else |
---|
| 1164 | ExeDate=${ExeDate}-${comp}_${LS_comp[5]}_${LS_comp[6]} |
---|
| 1165 | fi |
---|
| 1166 | ExeDate=${ExeDate}_${LS_comp[7]} |
---|
| 1167 | fi |
---|
| 1168 | |
---|
| 1169 | if [ ${i} -eq 0 ] ; then |
---|
| 1170 | # First component |
---|
| 1171 | NextExeSize="( "${ExeSize} |
---|
| 1172 | else |
---|
| 1173 | NextExeSize=${NextExeSize}", "${ExeSize} |
---|
| 1174 | fi |
---|
| 1175 | LastCompExeSize=${run_Log_LastExeSize[$i]} |
---|
| 1176 | (( i=i+1 )) |
---|
| 1177 | |
---|
| 1178 | if [ ${ExeSize} -ne ${LastCompExeSize} ] ; then |
---|
| 1179 | if ( ${FirstInitialize} ) ; then |
---|
| 1180 | IGCM_debug_Print 1 "Save first ${ExeNameIn} in ${R_OUT_EXE} !" |
---|
| 1181 | else |
---|
| 1182 | IGCM_debug_Print 1 "${ExeNameIn} has changed in ${R_EXE} !" |
---|
| 1183 | IGCM_debug_Print 1 "Save latest ${ExeNameIn} in ${R_OUT_EXE} !" |
---|
| 1184 | FileToBeDeleted[${#FileToBeDeleted[@]}]=${ExeNameOut} |
---|
| 1185 | fi |
---|
| 1186 | IGCM_sys_Put_Out ${ExeNameOut} ${R_OUT_EXE}/${PREFIX}_${ExeNameIn} rw |
---|
| 1187 | UpdateExe=true |
---|
| 1188 | |
---|
| 1189 | # SD : switch off for now |
---|
| 1190 | #IGCM_sys_GetDate_FichWork ${LS_bin} ExeSecDate |
---|
| 1191 | #if [ $ExeSecDateMax -lt $ExeSecDate ] ; then |
---|
| 1192 | # ExeSecDateMax=$ExeSecDate |
---|
| 1193 | #fi |
---|
| 1194 | fi |
---|
| 1195 | done |
---|
| 1196 | |
---|
| 1197 | # SD : switch off for now |
---|
| 1198 | #if ( ${UpdateExe} ) ; then |
---|
| 1199 | # echo "Launch SaveSourceModifications." |
---|
| 1200 | # IGCM_config_SaveSourceModifications ${ExeSecDateMax} |
---|
| 1201 | #fi |
---|
| 1202 | |
---|
| 1203 | NextExeSize=${NextExeSize}" )" |
---|
| 1204 | IGCM_card_WriteOption ${SUBMIT_DIR}/run.card Log LastExeSize "${NextExeSize}" |
---|
| 1205 | |
---|
| 1206 | if [ ${DRYRUN} -le 1 ] ; then |
---|
| 1207 | tail -1500 ${Exe_Output} > ${Exe_Output}_tail.txt |
---|
| 1208 | ExeCpuLog=$( gawk -f ${libIGCM}/libIGCM_sys/IGCM_add_out.awk ${Exe_Output}_tail.txt ) |
---|
| 1209 | RET=$? |
---|
| 1210 | if [ $RET -eq 0 ] ; then |
---|
| 1211 | # ExeCpuLog variable contents 5 fields |
---|
| 1212 | echo "${CumulPeriod} ${PeriodDateBegin} ${PeriodDateEnd} ${ExeCpuLog} ${ExeDate}" | \ |
---|
| 1213 | gawk '{printf("# %11d | %15s | %15s | %19s | %19s | %15.5f | %15.5f | %15.5f | %s\n", \ |
---|
| 1214 | $1,$2,$3,$4,$5,$6,$7,$8,$9)}' >> ${SUBMIT_DIR}/run.card |
---|
| 1215 | fi |
---|
| 1216 | FileToBeDeleted[${#FileToBeDeleted[@]}]=${Exe_Output}_tail.txt |
---|
| 1217 | fi |
---|
| 1218 | |
---|
| 1219 | fi |
---|
| 1220 | |
---|
| 1221 | #==================================# |
---|
| 1222 | # Save Job output # |
---|
| 1223 | #==================================# |
---|
| 1224 | if [ X${Pack} = Xtrue ] ; then |
---|
| 1225 | IGCM_sys_PutBuffer_Out ${Exe_Output} ${R_BUF_KSH}/${PREFIX}_${Exe_Output} |
---|
| 1226 | else |
---|
| 1227 | IGCM_sys_Put_Out ${Exe_Output} ${R_OUT_KSH}/${PREFIX}_${Exe_Output} |
---|
| 1228 | fi |
---|
| 1229 | FileToBeDeleted[${#FileToBeDeleted[@]}]=${Exe_Output} |
---|
| 1230 | |
---|
| 1231 | # All was right ? no ? then we stop. |
---|
| 1232 | IGCM_debug_Verif_Exit |
---|
| 1233 | |
---|
| 1234 | # If all was OK, we can delete all files not necessary for next Job |
---|
| 1235 | echo |
---|
| 1236 | IGCM_debug_Print 1 "Files that will be deleted before next period-run : " |
---|
| 1237 | |
---|
| 1238 | if [ ${DRYRUN} -le 2 ] ; then |
---|
| 1239 | for f in ${FileToBeDeleted[@]} ; do [ -f ${f} ] && ls -la $f ; [ -f ${f} ] && rm -f $f ; done |
---|
| 1240 | else |
---|
| 1241 | echo ${FileToBeDeleted[@]} |
---|
| 1242 | fi |
---|
| 1243 | |
---|
| 1244 | # Send some accounting element to the user if CumulPeriod=3 |
---|
| 1245 | if [ ${CumulPeriod} -eq 3 ] ; then |
---|
| 1246 | echo |
---|
| 1247 | IGCM_debug_Print 1 "Send email containing some accounting information : " |
---|
| 1248 | |
---|
| 1249 | RealCpuTime=$( echo ${ExeCpuLog} | gawk '{print $3}' ) |
---|
| 1250 | |
---|
| 1251 | consumeHoursPerPeriod=$( echo "scale=6;${RealCpuTime}*${coreNumber}/3600" | bc ) |
---|
| 1252 | |
---|
| 1253 | consumeHoursPerWholeSimulation=$( echo "scale=6;${consumeHoursPerPeriod}/${PeriodLengthInDays}*${ExperienceLengthInDays}" | bc ) |
---|
| 1254 | |
---|
| 1255 | recommendedPeriodNb=$( echo "scale=6;${jobWarningDelay}/3600/${consumeHoursPerPeriod}*${coreNumber}" | bc ) |
---|
| 1256 | |
---|
| 1257 | IGCM_sys_SendMail Accounting |
---|
| 1258 | fi |
---|
| 1259 | |
---|
| 1260 | #=================================================# |
---|
| 1261 | # Modification of libIGCM behaviour # |
---|
| 1262 | #=================================================# |
---|
| 1263 | |
---|
| 1264 | # To use this function, one must copy libIGCM.card from ${libIGCM} directory |
---|
| 1265 | # and put it in ${SUBMIT_DIR} directory. After modifications of ${SUBMIT_DIR}/libIGCM.card, |
---|
| 1266 | # variables define inside [UserChanges] will be modified for next Period of libIGCM main loop. |
---|
| 1267 | if [ -f ${SUBMIT_DIR}/libIGCM.card ] ; then |
---|
| 1268 | echo |
---|
| 1269 | echo "########################################################################" |
---|
| 1270 | echo "!!! Modification of libIGCM behaviour !!!" |
---|
| 1271 | echo |
---|
| 1272 | |
---|
| 1273 | IGCM_debug_Print 1 "DefineArrayFromOption : libIGCM_UserChanges in libIGCM.card" |
---|
| 1274 | IGCM_card_DefineArrayFromSection ${SUBMIT_DIR}/libIGCM.card UserChanges |
---|
| 1275 | IGCM_debug_Print 2 "libIGCM_UserChanges" ${libIGCM_UserChanges[*]} |
---|
| 1276 | |
---|
| 1277 | # Special treatments for libIGCM internals |
---|
| 1278 | for option in ${libIGCM_UserChanges[*]} ; do |
---|
| 1279 | IGCM_card_DefineVariableFromOption ${SUBMIT_DIR}/libIGCM.card UserChanges ${option} |
---|
| 1280 | |
---|
| 1281 | echo "We will change : ${option}." |
---|
| 1282 | eval echo "Previous value : " \${${option}} |
---|
| 1283 | eval echo "Change to : " \${libIGCM_UserChanges_${option}} |
---|
| 1284 | |
---|
| 1285 | eval ${option}=\${libIGCM_UserChanges_${option}} |
---|
| 1286 | |
---|
| 1287 | case ${option} in |
---|
| 1288 | config_UserChoices_DateEnd) |
---|
| 1289 | IGCM_debug_PrintVariables 1 config_UserChoices_DateEnd |
---|
| 1290 | DateEnd=$( IGCM_date_ConvertFormatToGregorian ${config_UserChoices_DateEnd} ) |
---|
| 1291 | |
---|
| 1292 | # Period Length In Days between DateBegin and DateEnd |
---|
| 1293 | (( ExperienceLengthInDays=$( IGCM_date_DaysBetweenGregorianDate ${DateEnd} ${DateBegin} ) + 1 )) |
---|
| 1294 | if [ ${ExperienceLengthInDays} -lt 0 ] ; then |
---|
| 1295 | IGCM_debug_Print 1 "Problem with dates in libIGCM.card : ${DateEnd} < ${DateBegin} ! You must check that." |
---|
| 1296 | IGCM_debug_Exit "IGCM_PeriodEnd have wrong dates." |
---|
| 1297 | IGCM_debug_Verif_Exit |
---|
| 1298 | fi |
---|
| 1299 | ;; |
---|
| 1300 | config_UserChoices_PeriodLength) |
---|
| 1301 | IGCM_debug_Print 1 "Change config_UserChoices_PeriodLength=${config_UserChoices_PeriodLength}" |
---|
| 1302 | ;; |
---|
| 1303 | PeriodNb) |
---|
| 1304 | IGCM_debug_Print 1 "Loop in main Job with ${PeriodNb} period(s)" |
---|
| 1305 | ;; |
---|
| 1306 | config_Post_RebuildFrequency) |
---|
| 1307 | IGCM_debug_Print 1 "Change config_Post_RebuildFrequency=${config_Post_RebuildFrequency} : IGCM_post_Configure" |
---|
| 1308 | IGCM_post_Configure |
---|
| 1309 | ;; |
---|
| 1310 | config_Post_TimeSeriesFrequency) |
---|
| 1311 | IGCM_debug_Print 1 "Change config_Post_TimeSeriesFrequency = ${config_Post_TimeSeriesFrequency} : IGCM_post_Configure" |
---|
| 1312 | IGCM_post_Configure |
---|
| 1313 | ;; |
---|
| 1314 | config_Post_SeasonalFrequency) |
---|
| 1315 | IGCM_debug_Print 1 "Change config_Post_SeasonalFrequency = ${config_Post_SeasonalFrequency} : IGCM_post_Configure" |
---|
| 1316 | IGCM_post_Configure |
---|
| 1317 | ;; |
---|
| 1318 | esac |
---|
| 1319 | done |
---|
| 1320 | |
---|
| 1321 | echo |
---|
| 1322 | echo "########################################################################" |
---|
| 1323 | echo |
---|
| 1324 | fi |
---|
| 1325 | |
---|
| 1326 | #=================================================# |
---|
| 1327 | # Determine next computed period # |
---|
| 1328 | #=================================================# |
---|
| 1329 | |
---|
| 1330 | PeriodDateBegin=$( IGCM_date_AddDaysToGregorianDate ${PeriodDateEnd} 1 ) |
---|
| 1331 | IGCM_date_GetYearMonthDay $PeriodDateBegin year month day |
---|
| 1332 | year_m1=$(( year - 1 )) |
---|
| 1333 | year_p1=$(( year + 1 )) |
---|
| 1334 | IGCM_config_DaysInPeriodLength |
---|
| 1335 | PeriodDateEnd=$( IGCM_date_AddDaysToGregorianDate ${PeriodDateBegin} $(( ${PeriodLengthInDays} - 1 )) ) |
---|
| 1336 | |
---|
| 1337 | # Debug Print : |
---|
| 1338 | echo |
---|
| 1339 | IGCM_debug_Print 1 "IGCM_config_PeriodEnd : Preparing Next Execution" |
---|
| 1340 | IGCM_debug_Print 1 "PeriodDateBegin : ${PeriodDateBegin}" |
---|
| 1341 | IGCM_debug_Print 1 "PeriodDateEnd : ${PeriodDateEnd}" |
---|
| 1342 | IGCM_debug_Print 1 "PeriodLengthInDays : ${PeriodLengthInDays}" |
---|
| 1343 | |
---|
| 1344 | PeriodDateBegin=$( IGCM_date_ConvertFormatToHuman ${PeriodDateBegin} ) |
---|
| 1345 | PeriodDateEnd=$( IGCM_date_ConvertFormatToHuman ${PeriodDateEnd} ) |
---|
| 1346 | |
---|
| 1347 | (( CumulPeriod = CumulPeriod + 1 )) |
---|
| 1348 | |
---|
| 1349 | # Debug Print : |
---|
| 1350 | echo |
---|
| 1351 | IGCM_debug_Print 3 "PeriodDateBegin Human : ${PeriodDateBegin}" |
---|
| 1352 | IGCM_debug_Print 3 "PeriodDateEnd Human : ${PeriodDateEnd}" |
---|
| 1353 | IGCM_debug_Print 3 "CumulPeriod : ${CumulPeriod}" |
---|
| 1354 | |
---|
| 1355 | #=================================================# |
---|
| 1356 | # Write updated run.card # |
---|
| 1357 | #=================================================# |
---|
| 1358 | |
---|
| 1359 | IGCM_card_WriteOption ${SUBMIT_DIR}/run.card Configuration PeriodDateBegin ${PeriodDateBegin} |
---|
| 1360 | IGCM_card_WriteOption ${SUBMIT_DIR}/run.card Configuration PeriodDateEnd ${PeriodDateEnd} |
---|
| 1361 | IGCM_card_WriteOption ${SUBMIT_DIR}/run.card Configuration CumulPeriod ${CumulPeriod} |
---|
| 1362 | |
---|
| 1363 | if ( ${FirstInitialize} ) ; then |
---|
| 1364 | # It's no more the first time |
---|
| 1365 | FirstInitialize=false |
---|
| 1366 | fi |
---|
| 1367 | |
---|
| 1368 | IGCM_debug_PopStack "IGCM_config_PeriodEnd" |
---|
| 1369 | } |
---|
| 1370 | |
---|
| 1371 | #=================================== |
---|
| 1372 | function IGCM_config_Finalize |
---|
| 1373 | { |
---|
| 1374 | IGCM_debug_PushStack "IGCM_config_Finalize" |
---|
| 1375 | |
---|
| 1376 | echo |
---|
| 1377 | IGCM_debug_Print 1 "IGCM_config_Finalize" |
---|
| 1378 | echo |
---|
| 1379 | |
---|
| 1380 | # Test state of run in run.card. Will schedule an exit if another process setted it to "Fatal" |
---|
| 1381 | IGCM_config_StateCheck |
---|
| 1382 | |
---|
| 1383 | # And EXIT if not OK |
---|
| 1384 | IGCM_debug_Verif_Exit |
---|
| 1385 | |
---|
| 1386 | if [ ${SimulationLengthInDays} -ge ${ExperienceLengthInDays} ] ; then |
---|
| 1387 | #==========================# |
---|
| 1388 | # End of entire simulation # |
---|
| 1389 | #==========================# |
---|
| 1390 | simulationIsOver=true |
---|
| 1391 | |
---|
| 1392 | # Mail notification |
---|
| 1393 | IGCM_sys_SendMail |
---|
| 1394 | # |
---|
| 1395 | IGCM_card_WriteOption ${SUBMIT_DIR}/run.card Configuration PeriodState "Completed" |
---|
| 1396 | # |
---|
| 1397 | IGCM_debug_Print 1 "Normal End of computation." |
---|
| 1398 | |
---|
| 1399 | else |
---|
| 1400 | #=================# |
---|
| 1401 | # Submit next job # |
---|
| 1402 | #=================# |
---|
| 1403 | simulationIsOver=false |
---|
| 1404 | |
---|
| 1405 | IGCM_card_WriteOption ${SUBMIT_DIR}/run.card Configuration PeriodState "OnQueue" |
---|
| 1406 | |
---|
| 1407 | # Name of next Ksh Script output : |
---|
| 1408 | Script_Output=${Script_Output_Prefix}_${config_UserChoices_JobName}.$( printf "%06d" ${CumulPeriod} ) |
---|
| 1409 | |
---|
| 1410 | IGCM_debug_Print 1 "Submit next job" |
---|
| 1411 | # SUBMIT NEXT JOB from SUBMIT_DIR and come back in RUN_DIR |
---|
| 1412 | IGCM_sys_Cd ${SUBMIT_DIR} |
---|
| 1413 | # Keep only the 5 latest ${Script_Output_Prefix}_${config_UserChoices_JobName} |
---|
| 1414 | ScriptTot=$( ls ${Script_Output_Prefix}_${config_UserChoices_JobName}.?????? 2>/dev/null | wc -l ) |
---|
| 1415 | [ ${ScriptTot} -gt 5 ] && rm -f $( ls ${Script_Output_Prefix}_${config_UserChoices_JobName}.?????? | head -$(( ${ScriptTot} - 5 )) ) |
---|
| 1416 | # Submit next job and come back |
---|
| 1417 | IGCM_sys_Qsub ${SUBMIT_DIR}/Job_${config_UserChoices_JobName} |
---|
| 1418 | IGCM_sys_Cd - |
---|
| 1419 | fi |
---|
| 1420 | |
---|
| 1421 | # Clean ${RUN_DIR}=${RUN_DIR_PATH}/${config_UserChoices_JobName}.${$} |
---|
| 1422 | # Only for production run (No clean up in DEV or DEB mode) |
---|
| 1423 | # and command sent from .. directory. |
---|
| 1424 | IGCM_sys_Cd .. |
---|
| 1425 | [ X${JobType} = XRUN ] && IGCM_sys_RmRunDir -rf ${RUN_DIR_PATH} |
---|
| 1426 | |
---|
| 1427 | # Inform the rabbitMQ queue |
---|
| 1428 | IGCM_debug_BigBro_Finalize |
---|
| 1429 | |
---|
| 1430 | IGCM_debug_PopStack "IGCM_config_Finalize" |
---|
| 1431 | } |
---|
| 1432 | |
---|
| 1433 | #=================================== |
---|
| 1434 | function IGCM_config_ensembleXIOS |
---|
| 1435 | { |
---|
| 1436 | IGCM_debug_PushStack "IGCM_config_ensembleXIOS" |
---|
| 1437 | |
---|
| 1438 | echo |
---|
| 1439 | IGCM_debug_Print 1 "IGCM_config_ensembleXIOS" |
---|
| 1440 | echo |
---|
| 1441 | whole_ensemble_size=$((config_Ensemble_PoolNumber * config_Ensemble_PoolSize)) |
---|
| 1442 | cp ${SUBMIT_DIR}/ENSEMBLES/create* . |
---|
| 1443 | cp ${SUBMIT_DIR}/ENSEMBLES/script* . |
---|
| 1444 | |
---|
| 1445 | j=0 #un compteur |
---|
| 1446 | for i in $(cut -d: -f3 ${SUBMIT_DIR}/ensemble.txt); do |
---|
| 1447 | noise_teta[$j]=$i |
---|
| 1448 | j=$j+1 |
---|
| 1449 | done |
---|
| 1450 | |
---|
| 1451 | |
---|
| 1452 | if [ ${config_Ensemble_EnsembleXIOS} = TRUE ] ; then |
---|
| 1453 | |
---|
| 1454 | for (( pool_member_rank=0 ; pool_member_rank < $(($config_Ensemble_PoolSize+1)) ; pool_member_rank++ )) |
---|
| 1455 | do |
---|
| 1456 | whole_ensemble_rank=$(($config_Ensemble_PoolSize*$1+$pool_member_rank)) |
---|
| 1457 | |
---|
| 1458 | if (( pool_member_rank < $config_Ensemble_PoolSize )) |
---|
| 1459 | then |
---|
| 1460 | [ ! -d MEMBER_$whole_ensemble_rank ] && mkdir MEMBER_$whole_ensemble_rank |
---|
| 1461 | cd MEMBER_$whole_ensemble_rank |
---|
| 1462 | ../create_ensemble_def $whole_ensemble_size $config_Ensemble_PoolSize $1 $pool_member_rank ${noise_teta[$whole_ensemble_rank]} |
---|
[6246] | 1463 | if [ ${config_UserChoices_TagName} = IPSLCM6 ] ; then |
---|
| 1464 | ../create_oasis_restart.sh $pool_member_rank |
---|
| 1465 | fi |
---|
[6204] | 1466 | else |
---|
| 1467 | [ ! -d XIOS ] && mkdir XIOS |
---|
| 1468 | cd XIOS |
---|
| 1469 | fi |
---|
[6246] | 1470 | if [ ${config_UserChoices_TagName} = IPSLCM6 ] ; then |
---|
| 1471 | ../create_oasis_namecoupl.sh $config_Ensemble_PoolSize $1 |
---|
| 1472 | fi |
---|
[6204] | 1473 | ../create_iodef_xml.sh $config_Ensemble_PoolSize |
---|
| 1474 | cd .. |
---|
| 1475 | done |
---|
| 1476 | ./create_runfile.sh $config_Ensemble_PoolSize $1 |
---|
| 1477 | fi |
---|
| 1478 | |
---|
| 1479 | IGCM_debug_PopStack "IGCM_config_ensembleXIOS" |
---|
| 1480 | } |
---|
| 1481 | |
---|