source: CONFIG_DEVT/ORCHIDEE_OL_TP/OOL_SEC_STO_FG8nd/PARAM/run.def.global @ 6327

# $HeadURL: svn://forge.ipsl.jussieu.fr/orchidee/trunk/ORCHIDEE_OL/OOL_SEC_STO_FG3/PARAM/run.def $
# $Date: 2018-12-06 13:51:22 +0100 (jeu. 06 déc. 2018) $
# $Revision: 5648 $

#**************************************************************************
#           Suggested parameter set up for ORCHIDEE 2.0
# See all optional parameters in modipsl/modeles/ORCHIDEE/orchidee.default
#
# Note when running with libIGCM, variables set here to _AUTOBLOCKER_ can 
# not be changed in run.def otherwwise the simulation will stop. Variables 
# set to _AUTO_ can be changed from the comp.card but they can also be 
# changed directly in the run.def. A value set in run.def can never be
# changed again by libIGCM. 
#**************************************************************************

# Activate Stomate component (default y)
STOMATE_OK_STOMATE = _AUTOBLOCKER_ 

# Time length for one intergration (default full lenght of forcing file)
START_DATE = _AUTO_
END_DATE = _AUTO_ 
DT_SECHIBA = 1200
FORCING_FILE = forcing_yearm1.nc forcing_year.nc forcing_yearp1.nc
#
# Domain description file
#
GRID_FILE = NONE
WEST_EAST = -180.0, 180.0
SOUTH_NORTH = -90.0, 90.0
SPRED_PREC_SEC = 3600

# Parameters related to the restart file and the start date
#**************************************************************************
# Time in the forcing file at which the model start if start date is not set by the forcing file (default 0)
TIME_SKIP = _AUTO_

# If DRIVER_reset_time=y, read the year from forcing file instead of taking it from restart file (default n)
DRIVER_reset_time = _AUTO_

# Name of restart file for the driver (default NONE)
RESTART_FILEIN = _AUTOBLOCKER_

# Name of restart file for sechiba part of the model (default NONE)
SECHIBA_restart_in = _AUTOBLOCKER_

# Name of restart file for stomate part of the model (default NONE)
STOMATE_RESTART_FILEIN = _AUTOBLOCKER_

# Parameters related to the diagnostic output files
#**************************************************************************
# Use XIOS for writing diagnostics file (defulat y)
XIOS_ORCHIDEE_OK = _AUTOBLOCKER_

# Flag to activate sechiba_out_2.nc history file when using IOIPSL for SECHIBA (defulat n)
SECHIBA_HISTFILE2 = _AUTO_

# Writefrequency in seconds in sechiba_history.nc when using IOIPSL (default 86400)
# If WRITE_STEP=0 then all IOIPSL output are deactivated
WRITE_STEP = _AUTO_

# Writefrequency in seconds sechiba_out_2.nc when using IOIPSL (default 1800)
WRITE_STEP2 = _AUTO_ 

# Writefrequency in days in stomate_history.nc when using IOIPSL (default 10)
STOMATE_HIST_DT = _AUTO_

# Writefrequency in days or -1 for monthly output in stomate_ipcc_history.nc when using IOIPSL (default 0)
STOMATE_IPCC_HIST_DT = _AUTO_

# Print level for text output in out_orchidee_*
# PRINTLEV = 1 : some output in initialization phase
# PRINTLEV = 2 : more output in initialization phase and printing of new date
# PRINTLEV = 3, 4,.. : more output also at each timestep
PRINTLEV=2

# Hydrology parameters
#**************************************************************************
# Activate the multi-layer diffusion scheme adapted from CWRR (default y)
HYDROL_CWRR = y

# Activate river routing (default y)
RIVER_ROUTING = y

# Activate creation of river_desc.nc file
# RIVER_DESC will be activated only the first execution in the simulation
RIVER_DESC = _AUTO_

# SOILTYPE_CLASSIF :  Type of classification used for the map of soil types (default zobler)
SOILTYPE_CLASSIF = zobler 

# Parameters related to vegetation map
#**************************************************************************
# Update vegetation frequency (default 0Y)
VEGET_UPDATE = _AUTO_

# Read lai map (default n)
LAI_MAP = n

# Prescribed vegetation (default n)
IMPOSE_VEG = n

# Parameters related to nitrogen cycle
#**************************************************************************
# Update nitrogen input maps (default 0Y)
NINPUT_UPDATE = _AUTO_

# Impose the CN ratio of leaves
STOMATE_IMPOSE_CN = _AUTO_

# Set STOMATE_READ_CN=y to read cnleaf_map.nc file if STOMATE_IMPOSE_CN=y
STOMATE_READ_CN = n
CNLEAF_VAR = CN_LEAF

# Parameters related to surface and thermal physical properties
#************************************************************************
# ROUGH_DYN : Account for a dynamic roughness height (activation of Su et al. parametrization) (default y)
ROUGH_DYN=y

# OK_FREEZE :  Activate the complet soil freezing scheme (default y)
OK_FREEZE=y

# OK_EXPLICITSNOW :  Activate explict snow scheme (default y)
OK_EXPLICITSNOW=y

# Carbon related parameters
#**************************************************************************
# Analytic spinup (default n)
SPINUP_ANALYTIC = _AUTO_
SPINUP_PERIOD = _AUTO_

# Value for atmospheric CO2 (default=350)
ATM_CO2 = _AUTO_: DEFAULT = 350.

# Activate harvest of wood (default y)
DO_WOOD_HARVEST=y

# Deactivate fire (default FIRE_DISABLE=y)
FIRE_DISABLE=y

# Optimized parameters to be used with PFTmap with 15 pfts such as
# files in IGCM/SRF/PFTMAPS/CMIP6/ESA-LUH2v2/historical/15PFT.v1
#**************************************************************************
# Use 15 PFTs. Note that PFTmap.nc must contains 15PFTs.
# PFT=10, 14 and 15 share the same parametrization except for VCMAX25, LAI_MAX, FRAC_GROWTHRESP, 
# MAINT_RESP_SLOPE_C and ALWAYS_INIT specified below.  
# (default NVM=13)
NVM=15
PFT_TO_MTC=1,2,3,4,5,6,7,8,9,10,11,12,13,10,10
PFT_NAME__10='temperate C3           grass      '
PFT_NAME__14='tropical  C3           grass      '
PFT_NAME__15='boreal    C3           grass      '

VCMAX25__10 = 50.0 
VCMAX25__14 = 50.0 
VCMAX25__15 = 40.0

LAI_MAX__10 = 2.5
LAI_MAX__14 = 2.5
LAI_MAX__15 = 2.0

ALWAYS_INIT__10 = y
ALWAYS_INIT__14 = n
ALWAYS_INIT__15 = y


# Parameters below are different from default values of ORCHIDEE_2_0.
# These values correspond to the previous default values and were used 
# during developement of ORCHIDEE-CN
#**************************************************************************
FRAC_GROWTHRESP__02 = 0.28
FRAC_GROWTHRESP__03 = 0.28
FRAC_GROWTHRESP__04 = 0.28
FRAC_GROWTHRESP__05 = 0.28
FRAC_GROWTHRESP__06 = 0.28
FRAC_GROWTHRESP__07 = 0.28
FRAC_GROWTHRESP__08 = 0.28
FRAC_GROWTHRESP__09 = 0.28
FRAC_GROWTHRESP__10 = 0.28
FRAC_GROWTHRESP__11 = 0.28
FRAC_GROWTHRESP__12 = 0.28
FRAC_GROWTHRESP__13 = 0.28
FRAC_GROWTHRESP__14 = 0.28
FRAC_GROWTHRESP__15 = 0.28


# Parameters below are different from default values of ORCHIDEE_2_0 
# because they were tuned for the developements of ORCHIDEE-CN
#**************************************************************************
MOIAVAIL_ALWAYS_GRASS=0.4
MOIAVAIL_ALWAYS_TREE=0.8
TCST_SNOWA=3

#PHENO_GDD_CRIT_C(K)
PHENO_GDD_CRIT_C__00012=360
PHENO_GDD_CRIT_C__00013=450

#HUM_MIN_TIME(days)
HUM_MIN_TIME__00012=50

#GDD_SENESCENCE(K)
GDD_SENESCENCE__00012=1600

#ALLOC_MIN(nan)
ALLOC_MIN__00007=0.35000
ALLOC_MIN__00008=0.70
ALLOC_MIN__00009=0.20


# File and variable name for nitrogen input files
#**************************************************************************
Nammonium_FILE = ndep_nhx.nc
Nammonium_VAR = nhx

Nnitrate_FILE = ndep_noy.nc
Nnitrate_VAR = noy

Nfert_FILE = NONE
Nfert_VAR = nfer

Nmanure_FILE = NONE
Nmanure_VAR = Nmanure

Nfert_cropland_FILE = nfert_cropland.nc
Nfert_cropland_VAR = nfer

Nmanure_cropland_FILE = nmanure_cropland.nc
Nmanure_cropland_VAR = Nmanure

Nfert_pasture_FILE = nfert_pasture.nc
Nfert_pasture_VAR = Nfer

Nmanure_pasture_FILE = nmanure_pasture.nc
Nmanure_pasture_VAR = Nmanure

Nbnf_FILE= bnf.nc
Nbnf_VAR= BNF_MGN_PERM2_PERYR