[4] | 1 | MODULE histcom |
---|
| 2 | !- |
---|
[11] | 3 | !$Id$ |
---|
[4] | 4 | !- |
---|
| 5 | USE netcdf |
---|
| 6 | !- |
---|
[362] | 7 | USE stringop, ONLY : nocomma,cmpblank,findpos,find_str,strlowercase |
---|
| 8 | USE mathelp, ONLY : mathop,moycum,trans_buff,buildop |
---|
| 9 | USE fliocom, ONLY : flio_dom_file,flio_dom_att |
---|
[4] | 10 | USE calendar |
---|
| 11 | USE errioipsl, ONLY : ipslerr |
---|
| 12 | !- |
---|
| 13 | IMPLICIT NONE |
---|
| 14 | !- |
---|
| 15 | PRIVATE |
---|
[362] | 16 | PUBLIC :: histbeg,histdef,histhori,histvert,histend, & |
---|
| 17 | & histwrite,histclo,histsync,ioconf_modname |
---|
[4] | 18 | !--------------------------------------------------------------------- |
---|
| 19 | !- Some confusing vocabulary in this code ! |
---|
| 20 | !- ========================================= |
---|
| 21 | !- |
---|
| 22 | !- A REGULAR grid is a grid which is i,j indexes |
---|
| 23 | !- and thus it is stored in a 2D matrix. |
---|
| 24 | !- This is opposed to a IRREGULAR grid which is only in a vector |
---|
| 25 | !- and where we do not know which neighbors we have. |
---|
| 26 | !- As a consequence we need the bounds for each grid-cell. |
---|
| 27 | !- |
---|
| 28 | !- A RECTILINEAR grid is a special case of a regular grid |
---|
| 29 | !- in which all longitudes for i constant are equal |
---|
| 30 | !- and all latitudes for j constant. |
---|
| 31 | !- In other words we do not need the full 2D matrix |
---|
| 32 | !- to describe the grid, just two vectors. |
---|
| 33 | !--------------------------------------------------------------------- |
---|
| 34 | INTERFACE histwrite |
---|
| 35 | !--------------------------------------------------------------------- |
---|
| 36 | !- The "histwrite" routines will give the data to the I/O system. |
---|
| 37 | !- It will trigger the operations to be performed, |
---|
| 38 | !- and the writting to the file if needed |
---|
| 39 | !- |
---|
| 40 | !- We test for the work to be done at this time here so that at a |
---|
| 41 | !- later stage we can call different operation and write subroutine |
---|
| 42 | !- for the REAL and INTEGER interfaces |
---|
| 43 | !- |
---|
| 44 | !- INPUT |
---|
| 45 | !- pfileid : The ID of the file on which this variable is to be, |
---|
| 46 | !- written. The variable should have been defined in |
---|
| 47 | !- this file before. |
---|
| 48 | !- pvarname : The short name of the variable |
---|
| 49 | !- pitau : Current timestep |
---|
| 50 | !- pdata : The variable, I mean the real data ! |
---|
| 51 | !- nbindex : The number of indexes provided. If it is equal to |
---|
| 52 | !- the size of the full field as provided in histdef |
---|
| 53 | !- then nothing is done. |
---|
| 54 | !- nindex : The indices used to expand the variable (pdata) |
---|
| 55 | !- onto the full field. |
---|
| 56 | !--------------------------------------------------------------------- |
---|
| 57 | !- histwrite - we have to prepare different type of fields : |
---|
| 58 | !- real and integer, 1,2 or 3D |
---|
| 59 | MODULE PROCEDURE histwrite_r1d,histwrite_r2d,histwrite_r3d |
---|
| 60 | END INTERFACE |
---|
| 61 | !- |
---|
| 62 | INTERFACE histbeg |
---|
| 63 | MODULE PROCEDURE histbeg_totreg,histbeg_regular,histbeg_irregular |
---|
| 64 | END INTERFACE |
---|
| 65 | !- |
---|
| 66 | INTERFACE histhori |
---|
| 67 | MODULE PROCEDURE histhori_regular,histhori_irregular |
---|
| 68 | END INTERFACE |
---|
| 69 | !- |
---|
| 70 | ! Fixed parameter |
---|
| 71 | !- |
---|
[362] | 72 | INTEGER,PARAMETER :: nb_files_max=20,nb_var_max=400, & |
---|
| 73 | & nb_hax_max=5,nb_zax_max=10,nbopp_max=10 |
---|
[75] | 74 | REAL,PARAMETER :: missing_val=nf90_fill_real |
---|
[4] | 75 | !- |
---|
| 76 | INTEGER :: bufftmp_max(nb_files_max) = 1 |
---|
| 77 | !- |
---|
| 78 | ! Time variables |
---|
| 79 | !- |
---|
| 80 | INTEGER,SAVE :: itau0(nb_files_max)=0 |
---|
| 81 | REAL,DIMENSION(nb_files_max),SAVE ::date0,deltat |
---|
| 82 | !- |
---|
| 83 | ! Counter of elements |
---|
| 84 | !- |
---|
| 85 | INTEGER,SAVE :: nb_files=0 |
---|
[358] | 86 | INTEGER,DIMENSION(nb_files_max),SAVE :: nb_var=0,nb_tax=0 |
---|
[4] | 87 | !- |
---|
[240] | 88 | ! DOMAIN IDs for files |
---|
| 89 | !- |
---|
| 90 | INTEGER,DIMENSION(nb_files_max),SAVE :: dom_id_svg=-1 |
---|
| 91 | !- |
---|
[4] | 92 | ! NETCDF IDs for files and axes |
---|
| 93 | !- |
---|
| 94 | INTEGER,DIMENSION(nb_files_max),SAVE :: ncdf_ids,xid,yid,tid |
---|
| 95 | !- |
---|
| 96 | ! General definitions in the NETCDF file |
---|
| 97 | !- |
---|
| 98 | INTEGER,DIMENSION(nb_files_max,2),SAVE :: & |
---|
| 99 | & full_size=0,slab_ori,slab_sz |
---|
| 100 | !- |
---|
| 101 | ! The horizontal axes |
---|
| 102 | !- |
---|
| 103 | INTEGER,SAVE :: nb_hax(nb_files_max)=0 |
---|
| 104 | CHARACTER(LEN=25),SAVE :: hax_name(nb_files_max,nb_hax_max,2) |
---|
| 105 | !- |
---|
| 106 | ! The vertical axes |
---|
| 107 | !- |
---|
| 108 | INTEGER,SAVE :: nb_zax(nb_files_max)=0 |
---|
| 109 | INTEGER,DIMENSION(nb_files_max,nb_zax_max),SAVE :: & |
---|
[122] | 110 | & zax_size,zax_ids |
---|
[4] | 111 | CHARACTER(LEN=20),SAVE :: zax_name(nb_files_max,nb_zax_max) |
---|
| 112 | !- |
---|
| 113 | ! Informations on each variable |
---|
| 114 | !- |
---|
| 115 | INTEGER,DIMENSION(nb_files_max,nb_var_max),SAVE :: & |
---|
[122] | 116 | & nbopp |
---|
[4] | 117 | CHARACTER(LEN=20),DIMENSION(nb_files_max,nb_var_max),SAVE :: & |
---|
| 118 | & name,unit_name |
---|
| 119 | CHARACTER(LEN=80),DIMENSION(nb_files_max,nb_var_max),SAVE :: & |
---|
| 120 | & title,fullop |
---|
| 121 | CHARACTER(LEN=7),SAVE :: topp(nb_files_max,nb_var_max) |
---|
| 122 | CHARACTER(LEN=7),SAVE :: sopps(nb_files_max,nb_var_max,nbopp_max) |
---|
| 123 | REAL,SAVE :: scal(nb_files_max,nb_var_max,nbopp_max) |
---|
| 124 | !- Sizes of the associated grid and zommed area |
---|
| 125 | INTEGER,DIMENSION(nb_files_max,nb_var_max,3),SAVE :: & |
---|
| 126 | & scsize,zorig,zsize |
---|
| 127 | !- Sizes for the data as it goes through the various math operations |
---|
| 128 | INTEGER,SAVE :: datasz_in(nb_files_max,nb_var_max,3) = -1 |
---|
| 129 | INTEGER,SAVE :: datasz_max(nb_files_max,nb_var_max) = -1 |
---|
| 130 | !- |
---|
| 131 | INTEGER,DIMENSION(nb_files_max,nb_var_max),SAVE :: & |
---|
| 132 | & var_haxid,var_zaxid,var_axid,ncvar_ids |
---|
| 133 | !- |
---|
[75] | 134 | REAL,DIMENSION(nb_files_max,nb_var_max,2),SAVE :: hist_minmax |
---|
| 135 | LOGICAL,DIMENSION(nb_files_max,nb_var_max),SAVE :: & |
---|
| 136 | & hist_calc_rng=.FALSE.,hist_wrt_rng=.FALSE. |
---|
[4] | 137 | !- |
---|
| 138 | REAL,DIMENSION(nb_files_max,nb_var_max),SAVE :: & |
---|
| 139 | & freq_opp,freq_wrt |
---|
| 140 | INTEGER,DIMENSION(nb_files_max,nb_var_max),SAVE :: & |
---|
| 141 | & last_opp,last_wrt,last_opp_chk,last_wrt_chk,nb_opp,nb_wrt,point |
---|
| 142 | !- |
---|
| 143 | ! Book keeping for the buffers |
---|
| 144 | !- |
---|
| 145 | INTEGER,SAVE :: buff_pos=0 |
---|
| 146 | REAL,ALLOCATABLE,SAVE :: buffer(:) |
---|
[362] | 147 | LOGICAL,DIMENSION(nb_files_max),SAVE :: zoom=.FALSE.,regular=.TRUE. |
---|
[4] | 148 | !- |
---|
| 149 | ! Book keeping of the axes |
---|
| 150 | !- |
---|
| 151 | INTEGER,DIMENSION(nb_files_max,nb_var_max),SAVE :: & |
---|
[122] | 152 | & tdimid,tax_last |
---|
[4] | 153 | CHARACTER(LEN=40),DIMENSION(nb_files_max,nb_var_max),SAVE :: & |
---|
| 154 | & tax_name |
---|
| 155 | !- |
---|
| 156 | ! A list of functions which require special action |
---|
| 157 | ! (Needs to be updated when functions are added |
---|
| 158 | ! but they are well located here) |
---|
| 159 | !- |
---|
| 160 | CHARACTER(LEN=120),SAVE :: & |
---|
| 161 | & indchfun = 'scatter, fill, gather, coll', & |
---|
| 162 | & fuchnbout = 'scatter, fill' |
---|
| 163 | !- Some configurable variables with locks |
---|
| 164 | CHARACTER(LEN=80),SAVE :: model_name='An IPSL model' |
---|
| 165 | LOGICAL,SAVE :: lock_modname=.FALSE. |
---|
| 166 | !- |
---|
| 167 | !=== |
---|
| 168 | CONTAINS |
---|
| 169 | !=== |
---|
| 170 | !- |
---|
[362] | 171 | SUBROUTINE histbeg_totreg & |
---|
| 172 | & (pfilename,pim,plon,pjm,plat, & |
---|
| 173 | & par_orix,par_szx,par_oriy,par_szy, & |
---|
| 174 | & pitau0,pdate0,pdeltat,phoriid,pfileid,domain_id) |
---|
[4] | 175 | !--------------------------------------------------------------------- |
---|
| 176 | !- This is just an interface for histbeg_regular in case when |
---|
[240] | 177 | !- the user provides plon and plat as vectors. |
---|
| 178 | !- Obviously this can only be used for very regular grids. |
---|
[4] | 179 | !- |
---|
| 180 | !- INPUT |
---|
| 181 | !- |
---|
| 182 | !- pfilename : Name of the netcdf file to be created |
---|
| 183 | !- pim : Size of arrays in longitude direction |
---|
| 184 | !- plon : Coordinates of points in longitude |
---|
| 185 | !- pjm : Size of arrays in latitude direction |
---|
| 186 | !- plat : Coordinates of points in latitude |
---|
| 187 | !- |
---|
| 188 | !- The next 4 arguments allow to define a horizontal zoom |
---|
| 189 | !- for this file. It is assumed that all variables to come |
---|
| 190 | !- have the same index space. This can not be assumed for |
---|
| 191 | !- the z axis and thus we define the zoom in histdef. |
---|
| 192 | !- |
---|
| 193 | !- par_orix : Origin of the slab of data within the X axis (pim) |
---|
| 194 | !- par_szx : Size of the slab of data in X |
---|
| 195 | !- par_oriy : Origin of the slab of data within the Y axis (pjm) |
---|
| 196 | !- par_szy : Size of the slab of data in Y |
---|
| 197 | !- |
---|
| 198 | !- pitau0 : time step at which the history tape starts |
---|
| 199 | !- pdate0 : The Julian date at which the itau was equal to 0 |
---|
| 200 | !- pdeltat : Time step in seconds. Time step of the counter itau |
---|
[362] | 201 | !- used in histwrte for instance |
---|
[4] | 202 | !- |
---|
| 203 | !- OUTPUT |
---|
| 204 | !- |
---|
| 205 | !- phoriid : ID of the horizontal grid |
---|
| 206 | !- pfileid : ID of the netcdf file |
---|
| 207 | !- |
---|
| 208 | !- Optional INPUT arguments |
---|
| 209 | !- |
---|
| 210 | !- domain_id : Domain identifier |
---|
| 211 | !- |
---|
| 212 | !- TO DO |
---|
| 213 | !- |
---|
| 214 | !- This package should be written in f90 |
---|
| 215 | !- and use the following features : |
---|
| 216 | !- - structures for the meta-data of the files and variables |
---|
| 217 | !- - memory allocation as needed |
---|
| 218 | !- - Pointers |
---|
| 219 | !- |
---|
| 220 | !- VERSION |
---|
| 221 | !- |
---|
| 222 | !--------------------------------------------------------------------- |
---|
| 223 | IMPLICIT NONE |
---|
| 224 | !- |
---|
| 225 | CHARACTER(LEN=*) :: pfilename |
---|
| 226 | INTEGER,INTENT(IN) :: pim,pjm |
---|
| 227 | REAL,DIMENSION(pim),INTENT(IN) :: plon |
---|
| 228 | REAL,DIMENSION(pjm),INTENT(IN) :: plat |
---|
| 229 | INTEGER,INTENT(IN):: par_orix,par_szx,par_oriy,par_szy |
---|
| 230 | INTEGER,INTENT(IN) :: pitau0 |
---|
| 231 | REAL,INTENT(IN) :: pdate0,pdeltat |
---|
| 232 | INTEGER,INTENT(OUT) :: pfileid,phoriid |
---|
| 233 | INTEGER,INTENT(IN),OPTIONAL :: domain_id |
---|
| 234 | !- |
---|
| 235 | LOGICAL :: check = .FALSE. |
---|
| 236 | !- |
---|
| 237 | REAL,ALLOCATABLE,DIMENSION(:,:) :: lon_tmp,lat_tmp |
---|
| 238 | !--------------------------------------------------------------------- |
---|
| 239 | IF (check) WRITE(*,*) "histbeg_totreg" |
---|
| 240 | !- |
---|
| 241 | ALLOCATE (lon_tmp(pim,pjm),lat_tmp(pim,pjm)) |
---|
| 242 | !- |
---|
| 243 | lon_tmp(:,:) = SPREAD(plon(:),2,pjm) |
---|
| 244 | lat_tmp(:,:) = SPREAD(plat(:),1,pim) |
---|
| 245 | !- |
---|
| 246 | CALL histbeg_regular & |
---|
| 247 | & (pfilename,pim,lon_tmp,pjm,lat_tmp, & |
---|
| 248 | & par_orix,par_szx,par_oriy,par_szy, & |
---|
| 249 | & pitau0,pdate0,pdeltat,phoriid,pfileid, & |
---|
| 250 | & .TRUE.,domain_id) |
---|
| 251 | !- |
---|
[362] | 252 | DEALLOCATE (lon_tmp,lat_tmp) |
---|
[4] | 253 | !---------------------------- |
---|
| 254 | END SUBROUTINE histbeg_totreg |
---|
| 255 | !=== |
---|
| 256 | SUBROUTINE histbeg_regular & |
---|
[362] | 257 | & (pfilename,pim,plon,pjm,plat, & |
---|
| 258 | & par_orix,par_szx,par_oriy,par_szy, & |
---|
| 259 | & pitau0,pdate0,pdeltat,phoriid,pfileid, & |
---|
| 260 | & opt_rectilinear,domain_id) |
---|
[4] | 261 | !--------------------------------------------------------------------- |
---|
| 262 | !- This subroutine initializes a netcdf file and returns the ID. |
---|
| 263 | !- It will set up the geographical space on which the data will be |
---|
| 264 | !- stored and offers the possibility of seting a zoom. |
---|
| 265 | !- It also gets the global parameters into the I/O subsystem. |
---|
| 266 | !- |
---|
| 267 | !- INPUT |
---|
| 268 | !- |
---|
| 269 | !- pfilename : Name of the netcdf file to be created |
---|
| 270 | !- pim : Size of arrays in longitude direction |
---|
| 271 | !- plon : Coordinates of points in longitude |
---|
| 272 | !- pjm : Size of arrays in latitude direction |
---|
| 273 | !- plat : Coordinates of points in latitude |
---|
| 274 | !- |
---|
| 275 | !- The next 4 arguments allow to define a horizontal zoom |
---|
| 276 | !- for this file. It is assumed that all variables to come |
---|
| 277 | !- have the same index space. This can not be assumed for |
---|
| 278 | !- the z axis and thus we define the zoom in histdef. |
---|
| 279 | !- |
---|
| 280 | !- par_orix : Origin of the slab of data within the X axis (pim) |
---|
| 281 | !- par_szx : Size of the slab of data in X |
---|
| 282 | !- par_oriy : Origin of the slab of data within the Y axis (pjm) |
---|
| 283 | !- par_szy : Size of the slab of data in Y |
---|
| 284 | !- |
---|
| 285 | !- pitau0 : time step at which the history tape starts |
---|
| 286 | !- pdate0 : The Julian date at which the itau was equal to 0 |
---|
| 287 | !- pdeltat : Time step in seconds. Time step of the counter itau |
---|
[362] | 288 | !- used in histwrte for instance |
---|
[4] | 289 | !- |
---|
| 290 | !- OUTPUT |
---|
| 291 | !- |
---|
| 292 | !- phoriid : ID of the horizontal grid |
---|
| 293 | !- pfileid : ID of the netcdf file |
---|
| 294 | !- |
---|
| 295 | !- Optional INPUT arguments |
---|
| 296 | !- |
---|
| 297 | !- opt_rectilinear : If true we know the grid is rectilinear |
---|
| 298 | !- domain_id : Domain identifier |
---|
| 299 | !- |
---|
| 300 | !- TO DO |
---|
| 301 | !- |
---|
| 302 | !- This package should be written in F90 and use the following |
---|
| 303 | !- feature : |
---|
| 304 | !- - structures for the meta-data of the files and variables |
---|
| 305 | !- - memory allocation as needed |
---|
| 306 | !- - Pointers |
---|
| 307 | !- |
---|
| 308 | !- VERSION |
---|
| 309 | !- |
---|
| 310 | !--------------------------------------------------------------------- |
---|
| 311 | IMPLICIT NONE |
---|
| 312 | !- |
---|
| 313 | CHARACTER(LEN=*) :: pfilename |
---|
| 314 | INTEGER,INTENT(IN) :: pim,pjm |
---|
| 315 | REAL,DIMENSION(pim,pjm),INTENT(IN) :: plon,plat |
---|
[358] | 316 | INTEGER,INTENT(IN):: par_orix,par_szx,par_oriy,par_szy |
---|
[4] | 317 | INTEGER,INTENT(IN) :: pitau0 |
---|
[358] | 318 | REAL,INTENT(IN) :: pdate0,pdeltat |
---|
| 319 | INTEGER,INTENT(OUT) :: pfileid,phoriid |
---|
[4] | 320 | LOGICAL,INTENT(IN),OPTIONAL :: opt_rectilinear |
---|
| 321 | INTEGER,INTENT(IN),OPTIONAL :: domain_id |
---|
| 322 | !- |
---|
[358] | 323 | INTEGER :: ncid,iret |
---|
[4] | 324 | CHARACTER(LEN=120) :: file |
---|
| 325 | CHARACTER(LEN=30) :: timenow |
---|
| 326 | LOGICAL :: rectilinear |
---|
| 327 | !- |
---|
| 328 | LOGICAL :: check = .FALSE. |
---|
| 329 | !--------------------------------------------------------------------- |
---|
| 330 | nb_files = nb_files+1 |
---|
| 331 | pfileid = nb_files |
---|
| 332 | !- |
---|
| 333 | ! 1.0 Transfering into the common for future use |
---|
| 334 | !- |
---|
| 335 | IF (check) WRITE(*,*) "histbeg_regular 1.0" |
---|
| 336 | !- |
---|
| 337 | itau0(pfileid) = pitau0 |
---|
| 338 | date0(pfileid) = pdate0 |
---|
| 339 | deltat(pfileid) = pdeltat |
---|
| 340 | !- |
---|
| 341 | IF (PRESENT(opt_rectilinear)) THEN |
---|
| 342 | rectilinear = opt_rectilinear |
---|
| 343 | ELSE |
---|
| 344 | rectilinear = .FALSE. |
---|
| 345 | ENDIF |
---|
| 346 | !- |
---|
| 347 | ! 2.0 Initializes all variables for this file |
---|
| 348 | !- |
---|
| 349 | IF (check) WRITE(*,*) "histbeg_regular 2.0" |
---|
| 350 | !- |
---|
| 351 | IF (nb_files > nb_files_max) THEN |
---|
| 352 | CALL ipslerr (3,"histbeg", & |
---|
| 353 | & 'Table of files too small. You should increase nb_files_max', & |
---|
[362] | 354 | & 'in histcom.f90 in order to accomodate all these files',' ') |
---|
[4] | 355 | ENDIF |
---|
| 356 | !- |
---|
| 357 | nb_var(pfileid) = 0 |
---|
| 358 | nb_tax(pfileid) = 0 |
---|
| 359 | nb_hax(pfileid) = 0 |
---|
| 360 | nb_zax(pfileid) = 0 |
---|
| 361 | !- |
---|
[362] | 362 | slab_ori(pfileid,1:2) = (/ par_orix,par_oriy /) |
---|
| 363 | slab_sz(pfileid,1:2) = (/ par_szx, par_szy /) |
---|
[4] | 364 | !- |
---|
| 365 | ! 3.0 Opening netcdf file and defining dimensions |
---|
| 366 | !- |
---|
| 367 | IF (check) WRITE(*,*) "histbeg_regular 3.0" |
---|
| 368 | !- |
---|
| 369 | ! Add DOMAIN number and ".nc" suffix in file name if needed |
---|
| 370 | !- |
---|
[358] | 371 | file = pfilename |
---|
[4] | 372 | CALL flio_dom_file (file,domain_id) |
---|
| 373 | !- |
---|
[358] | 374 | iret = NF90_CREATE (file,NF90_CLOBBER,ncid) |
---|
[4] | 375 | !- |
---|
| 376 | IF (rectilinear) THEN |
---|
[240] | 377 | iret = NF90_DEF_DIM (ncid,'lon',par_szx,xid(nb_files)) |
---|
| 378 | iret = NF90_DEF_DIM (ncid,'lat',par_szy,yid(nb_files)) |
---|
[4] | 379 | ELSE |
---|
[240] | 380 | iret = NF90_DEF_DIM (ncid,'x',par_szx,xid(nb_files)) |
---|
| 381 | iret = NF90_DEF_DIM (ncid,'y',par_szy,yid(nb_files)) |
---|
[4] | 382 | ENDIF |
---|
| 383 | !- |
---|
| 384 | ! 4.0 Declaring the geographical coordinates and other attributes |
---|
| 385 | !- |
---|
| 386 | IF (check) WRITE(*,*) "histbeg_regular 4.0" |
---|
| 387 | !- |
---|
| 388 | ! 4.3 Global attributes |
---|
| 389 | !- |
---|
[362] | 390 | iret = NF90_PUT_ATT (ncid,NF90_GLOBAL,'Conventions','CF-1.1') |
---|
[4] | 391 | iret = NF90_PUT_ATT (ncid,NF90_GLOBAL,'file_name',TRIM(file)) |
---|
| 392 | iret = NF90_PUT_ATT (ncid,NF90_GLOBAL,'production',TRIM(model_name)) |
---|
| 393 | lock_modname = .TRUE. |
---|
| 394 | CALL ioget_timestamp (timenow) |
---|
| 395 | iret = NF90_PUT_ATT (ncid,NF90_GLOBAL,'TimeStamp',TRIM(timenow)) |
---|
| 396 | !- |
---|
| 397 | ! 5.0 Saving some important information on this file in the common |
---|
| 398 | !- |
---|
| 399 | IF (check) WRITE(*,*) "histbeg_regular 5.0" |
---|
| 400 | !- |
---|
[240] | 401 | IF (PRESENT(domain_id)) THEN |
---|
| 402 | dom_id_svg(pfileid) = domain_id |
---|
| 403 | ENDIF |
---|
[4] | 404 | ncdf_ids(pfileid) = ncid |
---|
[362] | 405 | full_size(pfileid,1:2) = (/ pim,pjm /) |
---|
[4] | 406 | !- |
---|
| 407 | ! 6.0 storing the geographical coordinates |
---|
| 408 | !- |
---|
[358] | 409 | zoom(pfileid) = (pim /= par_szx).OR.(pjm /= par_szy) |
---|
[4] | 410 | regular(pfileid)=.TRUE. |
---|
| 411 | !- |
---|
[362] | 412 | CALL histhori_regular (pfileid,pim,plon,pjm,plat, & |
---|
| 413 | & ' ' ,'Default grid',phoriid,rectilinear) |
---|
[4] | 414 | !----------------------------- |
---|
| 415 | END SUBROUTINE histbeg_regular |
---|
| 416 | !=== |
---|
| 417 | SUBROUTINE histbeg_irregular & |
---|
[362] | 418 | & (pfilename,pim,plon,plon_bounds,plat,plat_bounds, & |
---|
| 419 | & pitau0,pdate0,pdeltat,phoriid,pfileid,domain_id) |
---|
[4] | 420 | !--------------------------------------------------------------------- |
---|
| 421 | !- This subroutine initializes a netcdf file and returns the ID. |
---|
| 422 | !- This version is for totaly irregular grids. In this case all |
---|
| 423 | !- all the data comes in as vectors and for the grid we have |
---|
| 424 | !- the coordinates of the 4 corners. |
---|
| 425 | !- It also gets the global parameters into the I/O subsystem. |
---|
| 426 | !- |
---|
| 427 | !- INPUT |
---|
| 428 | !- |
---|
| 429 | !- pfilename : Name of the netcdf file to be created |
---|
| 430 | !- pim : Size of arrays in longitude direction |
---|
| 431 | !- plon : Coordinates of points in longitude |
---|
| 432 | !- plon_bounds : The 2 corners of the grid in longitude |
---|
| 433 | !- plat : Coordinates of points in latitude |
---|
| 434 | !- plat_bounds : The 2 corners of the grid in latitude |
---|
| 435 | !- |
---|
| 436 | !- pitau0 : time step at which the history tape starts |
---|
| 437 | !- pdate0 : The Julian date at which the itau was equal to 0 |
---|
| 438 | !- pdeltat : Time step in seconds. Time step of the counter itau |
---|
[362] | 439 | !- used in histwrte for instance |
---|
[4] | 440 | !- |
---|
| 441 | !- OUTPUT |
---|
| 442 | !- |
---|
| 443 | !- phoriid : ID of the horizontal grid |
---|
| 444 | !- pfileid : ID of the netcdf file |
---|
| 445 | !- |
---|
| 446 | !- Optional INPUT arguments |
---|
| 447 | !- |
---|
| 448 | !- domain_id : Domain identifier |
---|
| 449 | !- |
---|
| 450 | !- TO DO |
---|
| 451 | !- |
---|
| 452 | !- This package should be written in F90 and use the following |
---|
| 453 | !- feature : |
---|
| 454 | !- - structures for the meta-data of the files and variables |
---|
| 455 | !- - memory allocation as needed |
---|
| 456 | !- - Pointers |
---|
| 457 | !- |
---|
| 458 | !- VERSION |
---|
| 459 | !- |
---|
| 460 | !--------------------------------------------------------------------- |
---|
| 461 | IMPLICIT NONE |
---|
| 462 | !- |
---|
| 463 | CHARACTER(LEN=*) :: pfilename |
---|
| 464 | INTEGER,INTENT(IN) :: pim |
---|
| 465 | REAL,DIMENSION(pim),INTENT(IN) :: plon,plat |
---|
| 466 | REAL,DIMENSION(:,:),INTENT(IN) :: plon_bounds,plat_bounds |
---|
| 467 | INTEGER,INTENT(IN) :: pitau0 |
---|
[358] | 468 | REAL,INTENT(IN) :: pdate0,pdeltat |
---|
| 469 | INTEGER,INTENT(OUT) :: pfileid,phoriid |
---|
[4] | 470 | INTEGER,INTENT(IN),OPTIONAL :: domain_id |
---|
| 471 | !- |
---|
[358] | 472 | INTEGER :: ncid,iret |
---|
[4] | 473 | CHARACTER(LEN=120) :: file |
---|
| 474 | CHARACTER(LEN=30) :: timenow |
---|
| 475 | !- |
---|
| 476 | LOGICAL :: check = .FALSE. |
---|
| 477 | !--------------------------------------------------------------------- |
---|
| 478 | nb_files = nb_files+1 |
---|
| 479 | pfileid = nb_files |
---|
| 480 | !- |
---|
| 481 | ! 1.0 Transfering into the common for future use |
---|
| 482 | !- |
---|
| 483 | IF (check) WRITE(*,*) "histbeg_irregular 1.0" |
---|
| 484 | !- |
---|
| 485 | itau0(pfileid) = pitau0 |
---|
| 486 | date0(pfileid) = pdate0 |
---|
| 487 | deltat(pfileid) = pdeltat |
---|
| 488 | !- |
---|
| 489 | ! 2.0 Initializes all variables for this file |
---|
| 490 | !- |
---|
| 491 | IF (check) WRITE(*,*) "histbeg_irregular 2.0" |
---|
| 492 | !- |
---|
| 493 | IF (nb_files > nb_files_max) THEN |
---|
| 494 | CALL ipslerr (3,"histbeg", & |
---|
| 495 | & 'Table of files too small. You should increase nb_files_max', & |
---|
[358] | 496 | & 'in histcom.f90 in order to accomodate all these files',' ') |
---|
[4] | 497 | ENDIF |
---|
| 498 | !- |
---|
| 499 | nb_var(pfileid) = 0 |
---|
| 500 | nb_tax(pfileid) = 0 |
---|
| 501 | nb_hax(pfileid) = 0 |
---|
| 502 | nb_zax(pfileid) = 0 |
---|
| 503 | !- |
---|
[362] | 504 | slab_ori(pfileid,1:2) = (/ 1,1 /) |
---|
| 505 | slab_sz(pfileid,1:2) = (/ pim,1 /) |
---|
[4] | 506 | !- |
---|
| 507 | ! 3.0 Opening netcdf file and defining dimensions |
---|
| 508 | !- |
---|
| 509 | IF (check) WRITE(*,*) "histbeg_irregular 3.0" |
---|
| 510 | !- |
---|
| 511 | ! Add DOMAIN number and ".nc" suffix in file name if needed |
---|
| 512 | !- |
---|
| 513 | file = pfilename |
---|
| 514 | CALL flio_dom_file (file,domain_id) |
---|
| 515 | !- |
---|
[240] | 516 | iret = NF90_CREATE (file,NF90_CLOBBER,ncid) |
---|
[4] | 517 | !- |
---|
[240] | 518 | iret = NF90_DEF_DIM (ncid,'x',pim,xid(nb_files)) |
---|
[4] | 519 | yid(nb_files) = 0 |
---|
| 520 | !- |
---|
[362] | 521 | ! 4.0 Declaring the geographical coordinates and other attributes |
---|
[4] | 522 | !- |
---|
[362] | 523 | IF (check) WRITE(*,*) "histbeg_irregular 4.0" |
---|
[4] | 524 | !- |
---|
| 525 | ! 4.3 Global attributes |
---|
| 526 | !- |
---|
[362] | 527 | iret = NF90_PUT_ATT (ncid,NF90_GLOBAL,'Conventions','CF-1.1') |
---|
[4] | 528 | iret = NF90_PUT_ATT (ncid,NF90_GLOBAL,'file_name',TRIM(file)) |
---|
| 529 | iret = NF90_PUT_ATT (ncid,NF90_GLOBAL,'production',TRIM(model_name)) |
---|
| 530 | lock_modname = .TRUE. |
---|
| 531 | CALL ioget_timestamp (timenow) |
---|
| 532 | iret = NF90_PUT_ATT (ncid,NF90_GLOBAL,'TimeStamp',TRIM(timenow)) |
---|
| 533 | !- |
---|
| 534 | ! 5.0 Saving some important information on this file in the common |
---|
| 535 | !- |
---|
| 536 | IF (check) WRITE(*,*) "histbeg_irregular 5.0" |
---|
| 537 | !- |
---|
[240] | 538 | IF (PRESENT(domain_id)) THEN |
---|
| 539 | dom_id_svg(pfileid) = domain_id |
---|
| 540 | ENDIF |
---|
[4] | 541 | ncdf_ids(pfileid) = ncid |
---|
[362] | 542 | full_size(pfileid,1:2) = (/ pim,1 /) |
---|
[4] | 543 | !- |
---|
| 544 | ! 6.0 storing the geographical coordinates |
---|
| 545 | !- |
---|
| 546 | zoom(pfileid)=.FALSE. |
---|
| 547 | regular(pfileid)=.FALSE. |
---|
| 548 | !- |
---|
| 549 | CALL histhori_irregular & |
---|
[362] | 550 | & (pfileid,pim,plon,plon_bounds,plat,plat_bounds, & |
---|
| 551 | & ' ' ,'Default grid',phoriid) |
---|
[4] | 552 | !------------------------------- |
---|
| 553 | END SUBROUTINE histbeg_irregular |
---|
| 554 | !=== |
---|
| 555 | SUBROUTINE histhori_regular & |
---|
| 556 | & (pfileid,pim,plon,pjm,plat,phname,phtitle,phid,opt_rectilinear) |
---|
| 557 | !--------------------------------------------------------------------- |
---|
| 558 | !- This subroutine is made to declare a new horizontale grid. |
---|
| 559 | !- It has to have the same number of points as |
---|
| 560 | !- the original and thus in this routine we will only |
---|
| 561 | !- add two variable (longitude and latitude). |
---|
| 562 | !- Any variable in the file can thus point to this pair |
---|
| 563 | !- through an attribute. This routine is very usefull |
---|
| 564 | !- to allow staggered grids. |
---|
| 565 | !- |
---|
| 566 | !- INPUT |
---|
| 567 | !- |
---|
| 568 | !- pfileid : The id of the file to which the grid should be added |
---|
| 569 | !- pim : Size in the longitude direction |
---|
| 570 | !- plon : The longitudes |
---|
| 571 | !- pjm : Size in the latitude direction |
---|
| 572 | !- plat : The latitudes |
---|
| 573 | !- phname : The name of grid |
---|
| 574 | !- phtitle : The title of the grid |
---|
| 575 | !- |
---|
| 576 | !- OUTPUT |
---|
| 577 | !- |
---|
| 578 | !- phid : Id of the created grid |
---|
| 579 | !- |
---|
| 580 | !- OPTIONAL |
---|
| 581 | !- |
---|
| 582 | !- opt_rectilinear : If true we know the grid is rectilinear. |
---|
| 583 | !- |
---|
| 584 | !--------------------------------------------------------------------- |
---|
| 585 | IMPLICIT NONE |
---|
| 586 | !- |
---|
[362] | 587 | INTEGER,INTENT(IN) :: pfileid,pim,pjm |
---|
| 588 | REAL,INTENT(IN),DIMENSION(pim,pjm) :: plon,plat |
---|
| 589 | CHARACTER(LEN=*),INTENT(IN) :: phname,phtitle |
---|
[4] | 590 | INTEGER,INTENT(OUT) :: phid |
---|
| 591 | LOGICAL,INTENT(IN),OPTIONAL :: opt_rectilinear |
---|
| 592 | !- |
---|
[362] | 593 | CHARACTER(LEN=25) :: lon_name,lat_name |
---|
| 594 | CHARACTER(LEN=80) :: tmp_title,tmp_name |
---|
[4] | 595 | INTEGER :: ndim |
---|
[358] | 596 | INTEGER,DIMENSION(2) :: dims |
---|
[362] | 597 | INTEGER :: nlonid,nlatid |
---|
| 598 | INTEGER :: orix,oriy,par_szx,par_szy |
---|
| 599 | INTEGER :: iret,ncid |
---|
[4] | 600 | LOGICAL :: rectilinear |
---|
| 601 | !- |
---|
| 602 | LOGICAL :: check = .FALSE. |
---|
| 603 | !--------------------------------------------------------------------- |
---|
| 604 | !- |
---|
| 605 | ! 1.0 Check that all fits in the buffers |
---|
| 606 | !- |
---|
| 607 | IF ( (pim /= full_size(pfileid,1)) & |
---|
| 608 | & .OR.(pjm /= full_size(pfileid,2)) ) THEN |
---|
| 609 | CALL ipslerr (3,"histhori", & |
---|
| 610 | & 'The new horizontal grid does not have the same size', & |
---|
| 611 | & 'as the one provided to histbeg. This is not yet ', & |
---|
| 612 | & 'possible in the hist package.') |
---|
| 613 | ENDIF |
---|
| 614 | !- |
---|
| 615 | IF (PRESENT(opt_rectilinear)) THEN |
---|
| 616 | rectilinear = opt_rectilinear |
---|
| 617 | ELSE |
---|
| 618 | rectilinear = .FALSE. |
---|
| 619 | ENDIF |
---|
| 620 | !- |
---|
| 621 | ! 1.1 Create all the variables needed |
---|
| 622 | !- |
---|
| 623 | IF (check) WRITE(*,*) "histhori_regular 1.0" |
---|
| 624 | !- |
---|
| 625 | ncid = ncdf_ids(pfileid) |
---|
| 626 | !- |
---|
| 627 | ndim = 2 |
---|
[362] | 628 | dims(1:2) = (/ xid(pfileid),yid(pfileid) /) |
---|
[4] | 629 | !- |
---|
| 630 | tmp_name = phname |
---|
| 631 | IF (rectilinear) THEN |
---|
| 632 | IF (nb_hax(pfileid) == 0) THEN |
---|
| 633 | lon_name = 'lon' |
---|
| 634 | lat_name = 'lat' |
---|
| 635 | ELSE |
---|
| 636 | lon_name = 'lon_'//TRIM(tmp_name) |
---|
| 637 | lat_name = 'lat_'//TRIM(tmp_name) |
---|
| 638 | ENDIF |
---|
| 639 | ELSE |
---|
| 640 | IF (nb_hax(pfileid) == 0) THEN |
---|
| 641 | lon_name = 'nav_lon' |
---|
| 642 | lat_name = 'nav_lat' |
---|
| 643 | ELSE |
---|
| 644 | lon_name = 'nav_lon_'//TRIM(tmp_name) |
---|
| 645 | lat_name = 'nav_lat_'//TRIM(tmp_name) |
---|
| 646 | ENDIF |
---|
| 647 | ENDIF |
---|
| 648 | !- |
---|
| 649 | ! 1.2 Save the informations |
---|
| 650 | !- |
---|
| 651 | phid = nb_hax(pfileid)+1 |
---|
| 652 | nb_hax(pfileid) = phid |
---|
| 653 | !- |
---|
[362] | 654 | hax_name(pfileid,phid,1:2) = (/ lon_name,lat_name /) |
---|
[4] | 655 | tmp_title = phtitle |
---|
| 656 | !- |
---|
| 657 | ! 2.0 Longitude |
---|
| 658 | !- |
---|
| 659 | IF (check) WRITE(*,*) "histhori_regular 2.0" |
---|
| 660 | !- |
---|
| 661 | IF (rectilinear) THEN |
---|
| 662 | ndim = 1 |
---|
| 663 | dims(1:1) = (/ xid(pfileid) /) |
---|
| 664 | ENDIF |
---|
| 665 | iret = NF90_DEF_VAR (ncid,lon_name,NF90_FLOAT,dims(1:ndim),nlonid) |
---|
[362] | 666 | IF (rectilinear) THEN |
---|
| 667 | iret = NF90_PUT_ATT (ncid,nlonid,'axis',"X") |
---|
| 668 | ENDIF |
---|
| 669 | iret = NF90_PUT_ATT (ncid,nlonid,'standard_name',"longitude") |
---|
[4] | 670 | iret = NF90_PUT_ATT (ncid,nlonid,'units',"degrees_east") |
---|
| 671 | iret = NF90_PUT_ATT (ncid,nlonid,'valid_min', & |
---|
| 672 | & REAL(MINVAL(plon),KIND=4)) |
---|
| 673 | iret = NF90_PUT_ATT (ncid,nlonid,'valid_max', & |
---|
| 674 | & REAL(MAXVAL(plon),KIND=4)) |
---|
| 675 | iret = NF90_PUT_ATT (ncid,nlonid,'long_name',"Longitude") |
---|
| 676 | iret = NF90_PUT_ATT (ncid,nlonid,'nav_model',TRIM(tmp_title)) |
---|
| 677 | !- |
---|
| 678 | ! 3.0 Latitude |
---|
| 679 | !- |
---|
| 680 | IF (check) WRITE(*,*) "histhori_regular 3.0" |
---|
| 681 | !- |
---|
| 682 | IF (rectilinear) THEN |
---|
| 683 | ndim = 1 |
---|
| 684 | dims(1:1) = (/ yid(pfileid) /) |
---|
| 685 | ENDIF |
---|
| 686 | iret = NF90_DEF_VAR (ncid,lat_name,NF90_FLOAT,dims(1:ndim),nlatid) |
---|
[362] | 687 | IF (rectilinear) THEN |
---|
| 688 | iret = NF90_PUT_ATT (ncid,nlatid,'axis',"Y") |
---|
| 689 | ENDIF |
---|
| 690 | iret = NF90_PUT_ATT (ncid,nlatid,'standard_name',"latitude") |
---|
[4] | 691 | iret = NF90_PUT_ATT (ncid,nlatid,'units',"degrees_north") |
---|
| 692 | iret = NF90_PUT_ATT (ncid,nlatid,'valid_min', & |
---|
| 693 | & REAL(MINVAL(plat),KIND=4)) |
---|
| 694 | iret = NF90_PUT_ATT (ncid,nlatid,'valid_max', & |
---|
| 695 | & REAL(MAXVAL(plat),KIND=4)) |
---|
| 696 | iret = NF90_PUT_ATT (ncid,nlatid,'long_name',"Latitude") |
---|
| 697 | iret = NF90_PUT_ATT (ncid,nlatid,'nav_model',TRIM(tmp_title)) |
---|
| 698 | !- |
---|
| 699 | iret = NF90_ENDDEF (ncid) |
---|
| 700 | !- |
---|
| 701 | ! 4.0 storing the geographical coordinates |
---|
| 702 | !- |
---|
| 703 | IF (check) WRITE(*,*) "histhori_regular 4.0" |
---|
| 704 | !- |
---|
| 705 | orix = slab_ori(pfileid,1) |
---|
| 706 | oriy = slab_ori(pfileid,2) |
---|
| 707 | par_szx = slab_sz(pfileid,1) |
---|
| 708 | par_szy = slab_sz(pfileid,2) |
---|
| 709 | !- |
---|
| 710 | ! Transfer the longitude |
---|
| 711 | !- |
---|
| 712 | IF (rectilinear) THEN |
---|
[295] | 713 | iret = NF90_PUT_VAR (ncid,nlonid,plon(orix:orix+par_szx-1,1)) |
---|
[4] | 714 | ELSE |
---|
[295] | 715 | iret = NF90_PUT_VAR (ncid,nlonid, & |
---|
| 716 | & plon(orix:orix+par_szx-1,oriy:oriy+par_szy-1)) |
---|
[4] | 717 | ENDIF |
---|
| 718 | !- |
---|
| 719 | ! Transfer the latitude |
---|
| 720 | !- |
---|
[358] | 721 | IF (rectilinear) THEN |
---|
[295] | 722 | iret = NF90_PUT_VAR (ncid,nlatid,plat(1,oriy:oriy+par_szy-1)) |
---|
[4] | 723 | ELSE |
---|
[295] | 724 | iret = NF90_PUT_VAR (ncid,nlatid, & |
---|
| 725 | & plat(orix:orix+par_szx-1,oriy:oriy+par_szy-1)) |
---|
[4] | 726 | ENDIF |
---|
| 727 | !- |
---|
| 728 | iret = NF90_REDEF (ncid) |
---|
| 729 | !------------------------------ |
---|
| 730 | END SUBROUTINE histhori_regular |
---|
| 731 | !=== |
---|
| 732 | SUBROUTINE histhori_irregular & |
---|
[362] | 733 | & (pfileid,pim,plon,plon_bounds,plat,plat_bounds, & |
---|
| 734 | & phname,phtitle,phid) |
---|
[4] | 735 | !--------------------------------------------------------------------- |
---|
| 736 | !- This subroutine is made to declare a new horizontale grid. |
---|
| 737 | !- It has to have the same number of points as |
---|
| 738 | !- the original and thus in this routine we will only |
---|
| 739 | !- add two variable (longitude and latitude). |
---|
| 740 | !- Any variable in the file can thus point to this pair |
---|
| 741 | !- through an attribute. This routine is very usefull |
---|
| 742 | !- to allow staggered grids. |
---|
| 743 | !- |
---|
| 744 | !- INPUT |
---|
| 745 | !- |
---|
| 746 | !- pfileid : The id of the file to which the grid should be added |
---|
| 747 | !- pim : Size in the longitude direction |
---|
| 748 | !- plon : The longitudes |
---|
| 749 | !- plon_bounds : The boundaries of the grid in longitude |
---|
| 750 | !- plat : The latitudes |
---|
| 751 | !- plat_bounds : Boundaries of the grid in latitude |
---|
| 752 | !- phname : The name of grid |
---|
| 753 | !- phtitle : The title of the grid |
---|
| 754 | !- |
---|
| 755 | !- OUTPUT |
---|
| 756 | !- |
---|
| 757 | !- phid : Id of the created grid |
---|
| 758 | !--------------------------------------------------------------------- |
---|
| 759 | IMPLICIT NONE |
---|
| 760 | !- |
---|
[362] | 761 | INTEGER,INTENT(IN) :: pfileid,pim |
---|
| 762 | REAL,DIMENSION(pim),INTENT(IN) :: plon,plat |
---|
| 763 | REAL,DIMENSION(:,:),INTENT(IN) :: plon_bounds,plat_bounds |
---|
| 764 | CHARACTER(LEN=*),INTENT(IN) :: phname,phtitle |
---|
[4] | 765 | INTEGER,INTENT(OUT) :: phid |
---|
| 766 | !- |
---|
[362] | 767 | CHARACTER(LEN=25) :: lon_name,lat_name |
---|
| 768 | CHARACTER(LEN=30) :: lonbound_name,latbound_name |
---|
| 769 | CHARACTER(LEN=80) :: tmp_title,tmp_name,longname |
---|
| 770 | INTEGER :: ndim,dims(2) |
---|
| 771 | INTEGER :: ndimb,dimsb(2) |
---|
[4] | 772 | INTEGER :: nbbounds |
---|
[362] | 773 | INTEGER :: nlonid,nlatid,nlonidb,nlatidb |
---|
| 774 | INTEGER :: iret,ncid,twoid |
---|
[4] | 775 | LOGICAL :: transp = .FALSE. |
---|
[362] | 776 | REAL,ALLOCATABLE,DIMENSION(:,:) :: bounds_trans |
---|
[4] | 777 | !- |
---|
| 778 | LOGICAL :: check = .FALSE. |
---|
| 779 | !--------------------------------------------------------------------- |
---|
| 780 | !- |
---|
| 781 | ! 1.0 Check that all fits in the buffers |
---|
| 782 | !- |
---|
| 783 | IF ( (pim /= full_size(pfileid,1)) & |
---|
| 784 | & .OR.(full_size(pfileid,2) /= 1) ) THEN |
---|
| 785 | CALL ipslerr (3,"histhori", & |
---|
| 786 | & 'The new horizontal grid does not have the same size', & |
---|
| 787 | & 'as the one provided to histbeg. This is not yet ', & |
---|
| 788 | & 'possible in the hist package.') |
---|
| 789 | ENDIF |
---|
| 790 | !- |
---|
| 791 | ! 1.1 Create all the variables needed |
---|
| 792 | !- |
---|
| 793 | IF (check) WRITE(*,*) 'histhori_irregular 1.0' |
---|
| 794 | !- |
---|
| 795 | ncid = ncdf_ids(pfileid) |
---|
| 796 | !- |
---|
[358] | 797 | IF (SIZE(plon_bounds,DIM=1) == pim) THEN |
---|
[122] | 798 | nbbounds = SIZE(plon_bounds,DIM=2) |
---|
[4] | 799 | transp = .TRUE. |
---|
[358] | 800 | ELSEIF (SIZE(plon_bounds,DIM=2) == pim) THEN |
---|
[122] | 801 | nbbounds = SIZE(plon_bounds,DIM=1) |
---|
[4] | 802 | transp = .FALSE. |
---|
| 803 | ELSE |
---|
| 804 | CALL ipslerr (3,"histhori", & |
---|
| 805 | & 'The boundary variable does not have any axis corresponding', & |
---|
| 806 | & 'to the size of the longitude or latitude variable', & |
---|
| 807 | & '.') |
---|
| 808 | ENDIF |
---|
| 809 | !- |
---|
| 810 | IF (.NOT.ALLOCATED(bounds_trans)) THEN |
---|
| 811 | ALLOCATE(bounds_trans(nbbounds,pim)) |
---|
| 812 | ENDIF |
---|
| 813 | !- |
---|
[362] | 814 | iret = NF90_DEF_DIM (ncid,'nbnd',nbbounds,twoid) |
---|
[4] | 815 | ndim = 1 |
---|
| 816 | dims(1) = xid(pfileid) |
---|
| 817 | ndimb = 2 |
---|
[362] | 818 | dimsb(1:2) = (/ twoid,xid(pfileid) /) |
---|
[4] | 819 | !- |
---|
| 820 | tmp_name = phname |
---|
| 821 | IF (nb_hax(pfileid) == 0) THEN |
---|
| 822 | lon_name = 'nav_lon' |
---|
| 823 | lat_name = 'nav_lat' |
---|
| 824 | ELSE |
---|
| 825 | lon_name = 'nav_lon_'//TRIM(tmp_name) |
---|
| 826 | lat_name = 'nav_lat_'//TRIM(tmp_name) |
---|
| 827 | ENDIF |
---|
| 828 | lonbound_name = TRIM(lon_name)//'_bounds' |
---|
| 829 | latbound_name = TRIM(lat_name)//'_bounds' |
---|
| 830 | !- |
---|
| 831 | ! 1.2 Save the informations |
---|
| 832 | !- |
---|
| 833 | phid = nb_hax(pfileid)+1 |
---|
| 834 | nb_hax(pfileid) = phid |
---|
| 835 | !- |
---|
[362] | 836 | hax_name(pfileid,phid,1:2) = (/ lon_name,lat_name /) |
---|
[4] | 837 | tmp_title = phtitle |
---|
| 838 | !- |
---|
| 839 | ! 2.0 Longitude |
---|
| 840 | !- |
---|
| 841 | IF (check) WRITE(*,*) "histhori_irregular 2.0" |
---|
| 842 | !- |
---|
| 843 | iret = NF90_DEF_VAR (ncid,lon_name,NF90_FLOAT,dims(1:ndim),nlonid) |
---|
[362] | 844 | iret = NF90_PUT_ATT (ncid,nlonid,'standard_name',"longitude") |
---|
[4] | 845 | iret = NF90_PUT_ATT (ncid,nlonid,'units',"degrees_east") |
---|
| 846 | iret = NF90_PUT_ATT (ncid,nlonid,'valid_min', & |
---|
| 847 | & REAL(MINVAL(plon),KIND=4)) |
---|
| 848 | iret = NF90_PUT_ATT (ncid,nlonid,'valid_max', & |
---|
| 849 | & REAL(MAXVAL(plon),KIND=4)) |
---|
| 850 | iret = NF90_PUT_ATT (ncid,nlonid,'long_name',"Longitude") |
---|
| 851 | iret = NF90_PUT_ATT (ncid,nlonid,'nav_model',TRIM(tmp_title)) |
---|
| 852 | !- |
---|
| 853 | ! 2.1 Longitude bounds |
---|
| 854 | !- |
---|
| 855 | iret = NF90_PUT_ATT (ncid,nlonid,'bounds',TRIM(lonbound_name)) |
---|
| 856 | iret = NF90_DEF_VAR (ncid,lonbound_name,NF90_FLOAT, & |
---|
| 857 | & dimsb(1:ndimb),nlonidb) |
---|
| 858 | longname = 'Boundaries for coordinate variable '//TRIM(lon_name) |
---|
| 859 | iret = NF90_PUT_ATT (ncid,nlonidb,'long_name',TRIM(longname)) |
---|
| 860 | !- |
---|
| 861 | ! 3.0 Latitude |
---|
| 862 | !- |
---|
| 863 | IF (check) WRITE(*,*) "histhori_irregular 3.0" |
---|
| 864 | !- |
---|
| 865 | iret = NF90_DEF_VAR (ncid,lat_name,NF90_FLOAT,dims(1:ndim),nlatid) |
---|
[362] | 866 | iret = NF90_PUT_ATT (ncid,nlatid,'standard_name',"latitude") |
---|
[4] | 867 | iret = NF90_PUT_ATT (ncid,nlatid,'units',"degrees_north") |
---|
| 868 | iret = NF90_PUT_ATT (ncid,nlatid,'valid_min', & |
---|
| 869 | & REAL(MINVAL(plat),KIND=4)) |
---|
| 870 | iret = NF90_PUT_ATT (ncid,nlatid,'valid_max', & |
---|
| 871 | & REAL(MAXVAL(plat),KIND=4)) |
---|
| 872 | iret = NF90_PUT_ATT (ncid,nlatid,'long_name',"Latitude") |
---|
| 873 | iret = NF90_PUT_ATT (ncid,nlatid,'nav_model',TRIM(tmp_title)) |
---|
| 874 | !- |
---|
| 875 | ! 3.1 Latitude bounds |
---|
| 876 | !- |
---|
| 877 | iret = NF90_PUT_ATT (ncid,nlatid,'bounds',TRIM(latbound_name)) |
---|
| 878 | iret = NF90_DEF_VAR (ncid,latbound_name,NF90_FLOAT, & |
---|
| 879 | & dimsb(1:ndimb),nlatidb) |
---|
| 880 | longname = 'Boundaries for coordinate variable '//TRIM(lat_name) |
---|
| 881 | iret = NF90_PUT_ATT (ncid,nlatidb,'long_name',TRIM(longname)) |
---|
| 882 | !- |
---|
| 883 | iret = NF90_ENDDEF (ncid) |
---|
| 884 | !- |
---|
| 885 | ! 4.0 storing the geographical coordinates |
---|
| 886 | !- |
---|
| 887 | IF (check) WRITE(*,*) "histhori_irregular 4.0" |
---|
| 888 | !- |
---|
| 889 | ! 4.1 Write the longitude |
---|
| 890 | !- |
---|
[362] | 891 | iret = NF90_PUT_VAR (ncid,nlonid,plon(1:pim)) |
---|
[4] | 892 | !- |
---|
| 893 | ! 4.2 Write the longitude bounds |
---|
| 894 | !- |
---|
| 895 | IF (transp) THEN |
---|
| 896 | bounds_trans = TRANSPOSE(plon_bounds) |
---|
| 897 | ELSE |
---|
| 898 | bounds_trans = plon_bounds |
---|
| 899 | ENDIF |
---|
[362] | 900 | iret = NF90_PUT_VAR (ncid,nlonidb,bounds_trans(1:nbbounds,1:pim)) |
---|
[4] | 901 | !- |
---|
| 902 | ! 4.3 Write the latitude |
---|
| 903 | !- |
---|
[362] | 904 | iret = NF90_PUT_VAR (ncid,nlatid,plat(1:pim)) |
---|
[4] | 905 | !- |
---|
| 906 | ! 4.4 Write the latitude bounds |
---|
| 907 | !- |
---|
| 908 | IF (transp) THEN |
---|
| 909 | bounds_trans = TRANSPOSE(plat_bounds) |
---|
| 910 | ELSE |
---|
| 911 | bounds_trans = plat_bounds |
---|
| 912 | ENDIF |
---|
| 913 | iret = NF90_PUT_VAR (ncid,nlatidb,bounds_trans(1:nbbounds,1:pim)) |
---|
| 914 | !- |
---|
| 915 | iret = NF90_REDEF (ncid) |
---|
| 916 | !-------------------------------- |
---|
| 917 | END SUBROUTINE histhori_irregular |
---|
| 918 | !=== |
---|
[358] | 919 | SUBROUTINE histvert (pfileid,pzaxname,pzaxtitle,pzaxunit, & |
---|
| 920 | & pzsize,pzvalues,pzaxid,pdirect) |
---|
[4] | 921 | !--------------------------------------------------------------------- |
---|
| 922 | !- This subroutine defines a vertical axis and returns it s id. |
---|
| 923 | !- It gives the user the possibility to the user to define many |
---|
| 924 | !- different vertical axes. For each variable defined with histdef a |
---|
| 925 | !- vertical axis can be specified with by it s ID. |
---|
| 926 | !- |
---|
| 927 | !- INPUT |
---|
| 928 | !- |
---|
| 929 | !- pfileid : ID of the file the variable should be archived in |
---|
| 930 | !- pzaxname : Name of the vertical axis |
---|
| 931 | !- pzaxtitle: title of the vertical axis |
---|
[358] | 932 | !- pzaxunit : Units of the vertical axis (no units ih blank string) |
---|
[4] | 933 | !- pzsize : size of the vertical axis |
---|
| 934 | !- pzvalues : Coordinate values of the vetical axis |
---|
| 935 | !- |
---|
| 936 | !- pdirect : is an optional argument which allows to specify the |
---|
| 937 | !- the positive direction of the axis : up or down. |
---|
| 938 | !- OUTPUT |
---|
| 939 | !- |
---|
| 940 | !- pzaxid : Returns the ID of the axis. |
---|
| 941 | !- Note that this is not the netCDF ID ! |
---|
| 942 | !- |
---|
| 943 | !- VERSION |
---|
| 944 | !- |
---|
| 945 | !--------------------------------------------------------------------- |
---|
| 946 | IMPLICIT NONE |
---|
| 947 | !- |
---|
| 948 | INTEGER,INTENT(IN) :: pfileid,pzsize |
---|
| 949 | CHARACTER(LEN=*),INTENT(IN) :: pzaxname,pzaxunit,pzaxtitle |
---|
| 950 | REAL,INTENT(IN) :: pzvalues(pzsize) |
---|
[362] | 951 | INTEGER,INTENT(OUT) :: pzaxid |
---|
[75] | 952 | CHARACTER(LEN=*),INTENT(IN),OPTIONAL :: pdirect |
---|
[4] | 953 | !- |
---|
[358] | 954 | INTEGER :: pos,iv,zdimid,zaxid_tmp |
---|
| 955 | CHARACTER(LEN=70) :: str71 |
---|
[4] | 956 | CHARACTER(LEN=80) :: str80 |
---|
| 957 | CHARACTER(LEN=20) :: direction |
---|
[362] | 958 | INTEGER :: iret,leng,ncid |
---|
[4] | 959 | LOGICAL :: check = .FALSE. |
---|
| 960 | !--------------------------------------------------------------------- |
---|
| 961 | !- |
---|
| 962 | ! 1.0 Verifications : |
---|
| 963 | ! Do we have enough space for an extra axis ? |
---|
| 964 | ! Is the name already in use ? |
---|
| 965 | !- |
---|
| 966 | IF (check) WRITE(*,*) "histvert : 1.0 Verifications", & |
---|
| 967 | & pzaxname,'---',pzaxunit,'---',pzaxtitle |
---|
| 968 | !- |
---|
| 969 | ! - Direction of axis. Can we get if from the user. |
---|
| 970 | ! If not we put unknown. |
---|
| 971 | !- |
---|
| 972 | IF (PRESENT(pdirect)) THEN |
---|
| 973 | direction = TRIM(pdirect) |
---|
| 974 | CALL strlowercase (direction) |
---|
| 975 | ELSE |
---|
| 976 | direction = 'unknown' |
---|
| 977 | ENDIF |
---|
| 978 | !- |
---|
| 979 | ! Check the consistency of the attribute |
---|
| 980 | !- |
---|
| 981 | IF ( (direction /= 'unknown') & |
---|
| 982 | & .AND.(direction /= 'up') & |
---|
| 983 | & .AND.(direction /= 'down') ) THEN |
---|
| 984 | direction = 'unknown' |
---|
| 985 | str80 = 'The specified axis was : '//TRIM(direction) |
---|
| 986 | CALL ipslerr (2,"histvert",& |
---|
| 987 | & "The specified direction for the vertical axis is not possible.",& |
---|
[362] | 988 | & "it is replaced by : unknown",str80) |
---|
[4] | 989 | ENDIF |
---|
| 990 | !- |
---|
[358] | 991 | IF (nb_zax(pfileid)+1 > nb_zax_max) THEN |
---|
[4] | 992 | CALL ipslerr (3,"histvert", & |
---|
| 993 | & 'Table of vertical axes too small. You should increase ',& |
---|
[358] | 994 | & 'nb_zax_max in histcom.f90 in order to accomodate all ', & |
---|
[4] | 995 | & 'these variables ') |
---|
| 996 | ENDIF |
---|
| 997 | !- |
---|
| 998 | iv = nb_zax(pfileid) |
---|
[358] | 999 | IF (iv > 1) THEN |
---|
| 1000 | CALL find_str (zax_name(pfileid,1:iv-1),pzaxname,pos) |
---|
[4] | 1001 | ELSE |
---|
| 1002 | pos = 0 |
---|
| 1003 | ENDIF |
---|
| 1004 | !- |
---|
[358] | 1005 | IF (pos > 0) THEN |
---|
| 1006 | WRITE(str71,'("Check variable ",A," in file",I3)') & |
---|
| 1007 | & TRIM(pzaxname),pfileid |
---|
| 1008 | CALL ipslerr (3,"histvert", & |
---|
| 1009 | & "Vertical axis already exists",TRIM(str71), & |
---|
| 1010 | & "Can also be a wrong file ID in another declaration") |
---|
[4] | 1011 | ENDIF |
---|
| 1012 | !- |
---|
| 1013 | iv = nb_zax(pfileid)+1 |
---|
| 1014 | !- |
---|
| 1015 | ! 2.0 Add the information to the file |
---|
| 1016 | !- |
---|
| 1017 | IF (check) & |
---|
| 1018 | & WRITE(*,*) "histvert : 2.0 Add the information to the file" |
---|
| 1019 | !- |
---|
| 1020 | ncid = ncdf_ids(pfileid) |
---|
| 1021 | !- |
---|
| 1022 | leng = MIN(LEN_TRIM(pzaxname),20) |
---|
| 1023 | iret = NF90_DEF_DIM (ncid,pzaxname(1:leng),pzsize,zaxid_tmp) |
---|
| 1024 | iret = NF90_DEF_VAR (ncid,pzaxname(1:leng),NF90_FLOAT, & |
---|
| 1025 | & zaxid_tmp,zdimid) |
---|
[240] | 1026 | iret = NF90_PUT_ATT (ncid,zdimid,'axis',"Z") |
---|
[362] | 1027 | iret = NF90_PUT_ATT (ncid,zdimid,'standard_name',"model_level_number") |
---|
[4] | 1028 | leng = MIN(LEN_TRIM(pzaxunit),20) |
---|
[358] | 1029 | IF (leng > 0) THEN |
---|
| 1030 | iret = NF90_PUT_ATT (ncid,zdimid,'units',pzaxunit(1:leng)) |
---|
| 1031 | ENDIF |
---|
[240] | 1032 | iret = NF90_PUT_ATT (ncid,zdimid,'positive',TRIM(direction)) |
---|
[4] | 1033 | iret = NF90_PUT_ATT (ncid,zdimid,'valid_min', & |
---|
| 1034 | & REAL(MINVAL(pzvalues(1:pzsize)),KIND=4)) |
---|
| 1035 | iret = NF90_PUT_ATT (ncid,zdimid,'valid_max', & |
---|
| 1036 | & REAL(MAXVAL(pzvalues(1:pzsize)),KIND=4)) |
---|
| 1037 | leng = MIN(LEN_TRIM(pzaxname),20) |
---|
[240] | 1038 | iret = NF90_PUT_ATT (ncid,zdimid,'title',pzaxname(1:leng)) |
---|
[4] | 1039 | leng = MIN(LEN_TRIM(pzaxtitle),80) |
---|
[240] | 1040 | iret = NF90_PUT_ATT (ncid,zdimid,'long_name',pzaxtitle(1:leng)) |
---|
[4] | 1041 | !- |
---|
| 1042 | iret = NF90_ENDDEF (ncid) |
---|
| 1043 | !- |
---|
[240] | 1044 | iret = NF90_PUT_VAR (ncid,zdimid,pzvalues(1:pzsize)) |
---|
[4] | 1045 | !- |
---|
| 1046 | iret = NF90_REDEF (ncid) |
---|
| 1047 | !- |
---|
| 1048 | !- 3.0 add the information to the common |
---|
| 1049 | !- |
---|
[358] | 1050 | IF (check) & |
---|
[4] | 1051 | & WRITE(*,*) "histvert : 3.0 add the information to the common" |
---|
| 1052 | !- |
---|
| 1053 | nb_zax(pfileid) = iv |
---|
[362] | 1054 | zax_size(pfileid,iv) = pzsize |
---|
| 1055 | zax_name(pfileid,iv) = pzaxname |
---|
| 1056 | zax_ids(pfileid,iv) = zaxid_tmp |
---|
[4] | 1057 | pzaxid = iv |
---|
| 1058 | !---------------------- |
---|
| 1059 | END SUBROUTINE histvert |
---|
| 1060 | !=== |
---|
[362] | 1061 | SUBROUTINE histdef (pfileid,pvarname,ptitle,punit, & |
---|
| 1062 | & pxsize,pysize,phoriid,pzsize, & |
---|
| 1063 | & par_oriz,par_szz,pzid, & |
---|
| 1064 | & pnbbyt,popp,pfreq_opp,pfreq_wrt,var_range) |
---|
[4] | 1065 | !--------------------------------------------------------------------- |
---|
| 1066 | !- With this subroutine each variable to be archived on the history |
---|
| 1067 | !- tape should be declared. |
---|
| 1068 | !- |
---|
| 1069 | !- It gives the user the choise of operation |
---|
| 1070 | !- to be performed on the variables, the frequency of this operation |
---|
| 1071 | !- and finaly the frequency of the archiving. |
---|
| 1072 | !- |
---|
| 1073 | !- INPUT |
---|
| 1074 | !- |
---|
| 1075 | !- pfileid : ID of the file the variable should be archived in |
---|
| 1076 | !- pvarname : Name of the variable, short and easy to remember |
---|
| 1077 | !- ptitle : Full name of the variable |
---|
[358] | 1078 | !- punit : Units of the variable (no units if blank string) |
---|
[4] | 1079 | !- |
---|
| 1080 | !- The next 3 arguments give the size of that data |
---|
| 1081 | !- that will be passed to histwrite. The zoom will be |
---|
| 1082 | !- done there with the horizontal information obtained |
---|
| 1083 | !- in histbeg and the vertical information to follow. |
---|
| 1084 | !- |
---|
| 1085 | !- pxsize : Size in X direction (size of the data that will be |
---|
| 1086 | !- given to histwrite) |
---|
| 1087 | !- pysize : Size in Y direction |
---|
| 1088 | !- phoriid : ID of the horizontal axis |
---|
| 1089 | !- |
---|
| 1090 | !- The next two arguments give the vertical zoom to use. |
---|
| 1091 | !- |
---|
| 1092 | !- pzsize : Size in Z direction (If 1 then no axis is declared |
---|
| 1093 | !- for this variable and pzid is not used) |
---|
| 1094 | !- par_oriz : Off set of the zoom |
---|
| 1095 | !- par_szz : Size of the zoom |
---|
| 1096 | !- |
---|
| 1097 | !- pzid : ID of the vertical axis to use. It has to have |
---|
| 1098 | !- the size of the zoom. |
---|
| 1099 | !- pnbbyt : Number of bytes on which to store in netCDF (Not opp.) |
---|
| 1100 | !- popp : Operation to be performed. The following options |
---|
| 1101 | !- exist today : |
---|
| 1102 | !- inst : keeps instantaneous values for writting |
---|
| 1103 | !- ave : Computes the average from call between writes |
---|
| 1104 | !- pfreq_opp: Frequency of this operation (in seconds) |
---|
| 1105 | !- pfreq_wrt: Frequency at which the variable should be |
---|
| 1106 | !- written (in seconds) |
---|
[75] | 1107 | !- var_range: Range of the variable. |
---|
| 1108 | !- If the minimum is greater than the maximum, |
---|
| 1109 | !- the values will be calculated. |
---|
[4] | 1110 | !- |
---|
| 1111 | !- VERSION |
---|
| 1112 | !--------------------------------------------------------------------- |
---|
| 1113 | IMPLICIT NONE |
---|
| 1114 | !- |
---|
[362] | 1115 | INTEGER,INTENT(IN) :: pfileid,pxsize,pysize,pzsize,pzid |
---|
| 1116 | INTEGER,INTENT(IN) :: par_oriz,par_szz,pnbbyt,phoriid |
---|
| 1117 | CHARACTER(LEN=*),INTENT(IN) :: pvarname,punit,popp,ptitle |
---|
| 1118 | REAL,INTENT(IN) :: pfreq_opp,pfreq_wrt |
---|
[75] | 1119 | REAL,DIMENSION(2),OPTIONAL,INTENT(IN) :: var_range |
---|
[4] | 1120 | !- |
---|
[358] | 1121 | INTEGER :: iv,i |
---|
[362] | 1122 | CHARACTER(LEN=70) :: str70,str71,str72 |
---|
[4] | 1123 | CHARACTER(LEN=20) :: tmp_name |
---|
[358] | 1124 | CHARACTER(LEN=40) :: str40 |
---|
[4] | 1125 | CHARACTER(LEN=10) :: str10 |
---|
| 1126 | CHARACTER(LEN=80) :: tmp_str80 |
---|
[362] | 1127 | CHARACTER(LEN=7) :: tmp_topp,tmp_sopp(nbopp_max) |
---|
[4] | 1128 | CHARACTER(LEN=120) :: ex_topps |
---|
[362] | 1129 | REAL :: tmp_scal(nbopp_max),un_an,un_jour,test_fopp,test_fwrt |
---|
| 1130 | INTEGER :: pos,buff_sz |
---|
[4] | 1131 | !- |
---|
| 1132 | LOGICAL :: check = .FALSE. |
---|
| 1133 | !--------------------------------------------------------------------- |
---|
| 1134 | ex_topps = 'ave, inst, t_min, t_max, t_sum, once, never, l_max, l_min' |
---|
| 1135 | !- |
---|
| 1136 | nb_var(pfileid) = nb_var(pfileid)+1 |
---|
| 1137 | iv = nb_var(pfileid) |
---|
| 1138 | !- |
---|
[358] | 1139 | IF (iv > nb_var_max) THEN |
---|
[4] | 1140 | CALL ipslerr (3,"histdef", & |
---|
| 1141 | & 'Table of variables too small. You should increase nb_var_max',& |
---|
[358] | 1142 | & 'in histcom.f90 in order to accomodate all these variables', & |
---|
[4] | 1143 | & ' ') |
---|
| 1144 | ENDIF |
---|
| 1145 | !- |
---|
| 1146 | ! 1.0 Transfer informations on the variable to the common |
---|
| 1147 | ! and verify that it does not already exist |
---|
| 1148 | !- |
---|
| 1149 | IF (check) WRITE(*,*) "histdef : 1.0" |
---|
| 1150 | !- |
---|
| 1151 | IF (iv > 1) THEN |
---|
[358] | 1152 | CALL find_str (name(pfileid,1:iv-1),pvarname,pos) |
---|
[4] | 1153 | ELSE |
---|
| 1154 | pos = 0 |
---|
| 1155 | ENDIF |
---|
| 1156 | !- |
---|
| 1157 | IF (pos > 0) THEN |
---|
| 1158 | str70 = "Variable already exists" |
---|
[358] | 1159 | WRITE(str71,'("Check variable ",a," in file",I3)') & |
---|
| 1160 | & TRIM(pvarname),pfileid |
---|
[4] | 1161 | str72 = "Can also be a wrong file ID in another declaration" |
---|
[362] | 1162 | CALL ipslerr (3,"histdef",str70,str71,str72) |
---|
[4] | 1163 | ENDIF |
---|
| 1164 | !- |
---|
| 1165 | name(pfileid,iv) = pvarname |
---|
| 1166 | title(pfileid,iv) = ptitle |
---|
| 1167 | unit_name(pfileid,iv) = punit |
---|
| 1168 | tmp_name = name(pfileid,iv) |
---|
| 1169 | !- |
---|
| 1170 | ! 1.1 decode the operations |
---|
| 1171 | !- |
---|
| 1172 | fullop(pfileid,iv) = popp |
---|
| 1173 | tmp_str80 = popp |
---|
| 1174 | CALL buildop & |
---|
[362] | 1175 | & (tmp_str80,ex_topps,tmp_topp,nbopp_max,missing_val, & |
---|
| 1176 | & tmp_sopp,tmp_scal,nbopp(pfileid,iv)) |
---|
[4] | 1177 | !- |
---|
| 1178 | topp(pfileid,iv) = tmp_topp |
---|
| 1179 | DO i=1,nbopp(pfileid,iv) |
---|
| 1180 | sopps(pfileid,iv,i) = tmp_sopp(i) |
---|
| 1181 | scal(pfileid,iv,i) = tmp_scal(i) |
---|
| 1182 | ENDDO |
---|
| 1183 | !- |
---|
| 1184 | ! 1.2 If we have an even number of operations |
---|
| 1185 | ! then we need to add identity |
---|
| 1186 | !- |
---|
| 1187 | IF (2*INT(nbopp(pfileid,iv)/2.0) == nbopp(pfileid,iv)) THEN |
---|
| 1188 | nbopp(pfileid,iv) = nbopp(pfileid,iv)+1 |
---|
| 1189 | sopps(pfileid,iv,nbopp(pfileid,iv)) = 'ident' |
---|
| 1190 | scal(pfileid,iv,nbopp(pfileid,iv)) = missing_val |
---|
| 1191 | ENDIF |
---|
| 1192 | !- |
---|
| 1193 | ! 2.0 Put the size of the variable in the common and check |
---|
| 1194 | !- |
---|
| 1195 | IF (check) & |
---|
[362] | 1196 | & WRITE(*,*) "histdef : 2.0",pfileid,iv,nbopp(pfileid,iv), & |
---|
[4] | 1197 | & sopps(pfileid,iv,1:nbopp(pfileid,iv)), & |
---|
| 1198 | & scal(pfileid,iv,1:nbopp(pfileid,iv)) |
---|
| 1199 | !- |
---|
[362] | 1200 | scsize(pfileid,iv,1:3) = (/ pxsize,pysize,pzsize /) |
---|
[4] | 1201 | !- |
---|
| 1202 | zorig(pfileid,iv,1:3) = & |
---|
[362] | 1203 | & (/ slab_ori(pfileid,1),slab_ori(pfileid,2),par_oriz /) |
---|
[4] | 1204 | !- |
---|
| 1205 | zsize(pfileid,iv,1:3) = & |
---|
[362] | 1206 | & (/ slab_sz(pfileid,1),slab_sz(pfileid,2),par_szz /) |
---|
[4] | 1207 | !- |
---|
| 1208 | ! Is the size of the full array the same as that of the coordinates ? |
---|
| 1209 | !- |
---|
| 1210 | IF ( (pxsize > full_size(pfileid,1)) & |
---|
| 1211 | & .OR.(pysize > full_size(pfileid,2)) ) THEN |
---|
| 1212 | !- |
---|
| 1213 | str70 = "The size of the variable is different "// & |
---|
| 1214 | & "from the one of the coordinates" |
---|
[362] | 1215 | WRITE(str71,'("Size of coordinates :",2I4)') & |
---|
| 1216 | & full_size(pfileid,1),full_size(pfileid,2) |
---|
[4] | 1217 | WRITE(str72,'("Size declared for variable ",a," :",2I4)') & |
---|
[362] | 1218 | & TRIM(tmp_name),pxsize,pysize |
---|
| 1219 | CALL ipslerr (3,"histdef",str70,str71,str72) |
---|
[4] | 1220 | ENDIF |
---|
| 1221 | !- |
---|
| 1222 | ! Is the size of the zoom smaler than the coordinates ? |
---|
| 1223 | !- |
---|
| 1224 | IF ( (full_size(pfileid,1) < slab_sz(pfileid,1)) & |
---|
| 1225 | & .OR.(full_size(pfileid,2) < slab_sz(pfileid,2)) ) THEN |
---|
| 1226 | str70 = & |
---|
| 1227 | & "Size of variable should be greater or equal to those of the zoom" |
---|
[362] | 1228 | WRITE(str71,'("Size of XY zoom :",2I4)') & |
---|
[4] | 1229 | & slab_sz(pfileid,1),slab_sz(pfileid,1) |
---|
| 1230 | WRITE(str72,'("Size declared for variable ",a," :",2I4)') & |
---|
[362] | 1231 | & TRIM(tmp_name),pxsize,pysize |
---|
| 1232 | CALL ipslerr (3,"histdef",str70,str71,str72) |
---|
[4] | 1233 | ENDIF |
---|
| 1234 | !- |
---|
| 1235 | ! 2.1 We store the horizontal grid information with minimal |
---|
| 1236 | ! and a fall back onto the default grid |
---|
| 1237 | !- |
---|
[358] | 1238 | IF ( (phoriid > 0).AND.(phoriid <= nb_hax(pfileid)) ) THEN |
---|
[4] | 1239 | var_haxid(pfileid,iv) = phoriid |
---|
| 1240 | ELSE |
---|
| 1241 | var_haxid(pfileid,iv) = 1 |
---|
| 1242 | CALL ipslerr (2,"histdef", & |
---|
| 1243 | & 'We use the default grid for variable as an invalide',& |
---|
[362] | 1244 | & 'ID was provided for variable : ',TRIM(pvarname)) |
---|
[4] | 1245 | ENDIF |
---|
| 1246 | !- |
---|
| 1247 | ! 2.2 Check the vertical coordinates if needed |
---|
| 1248 | !- |
---|
| 1249 | IF (par_szz > 1) THEN |
---|
| 1250 | !- |
---|
| 1251 | !-- Does the vertical coordinate exist ? |
---|
| 1252 | !- |
---|
[358] | 1253 | IF (pzid > nb_zax(pfileid)) THEN |
---|
[4] | 1254 | WRITE(str70, & |
---|
| 1255 | & '("The vertical coordinate chosen for variable ",a)') & |
---|
| 1256 | & TRIM(tmp_name) |
---|
| 1257 | str71 = " Does not exist." |
---|
[362] | 1258 | CALL ipslerr (3,"histdef",str70,str71," ") |
---|
[4] | 1259 | ENDIF |
---|
| 1260 | !- |
---|
| 1261 | !-- Is the vertical size of the variable equal to that of the axis ? |
---|
| 1262 | !- |
---|
| 1263 | IF (par_szz /= zax_size(pfileid,pzid)) THEN |
---|
| 1264 | str70 = "The size of the zoom does not correspond "// & |
---|
| 1265 | & "to the size of the chosen vertical axis" |
---|
[362] | 1266 | WRITE(str71,'("Size of zoom in z :",I4)') par_szz |
---|
[122] | 1267 | WRITE(str72,'("Size declared for axis ",A," :",I4)') & |
---|
[358] | 1268 | & TRIM(zax_name(pfileid,pzid)),zax_size(pfileid,pzid) |
---|
[362] | 1269 | CALL ipslerr (3,"histdef",str70,str71,str72) |
---|
[4] | 1270 | ENDIF |
---|
| 1271 | !- |
---|
| 1272 | !-- Is the zoom smaler that the total size of the variable ? |
---|
| 1273 | !- |
---|
[358] | 1274 | IF (pzsize < par_szz) THEN |
---|
[4] | 1275 | str70 = "The vertical size of variable "// & |
---|
| 1276 | & "is smaller than that of the zoom." |
---|
[362] | 1277 | WRITE(str71,'("Declared vertical size of data :",I5)') pzsize |
---|
[4] | 1278 | WRITE(str72,'("Size of zoom for variable ",a," = ",I5)') & |
---|
| 1279 | & TRIM(tmp_name),par_szz |
---|
[362] | 1280 | CALL ipslerr (3,"histdef",str70,str71,str72) |
---|
[4] | 1281 | ENDIF |
---|
| 1282 | var_zaxid(pfileid,iv) = pzid |
---|
| 1283 | ELSE |
---|
| 1284 | var_zaxid(pfileid,iv) = -99 |
---|
| 1285 | ENDIF |
---|
| 1286 | !- |
---|
| 1287 | ! 3.0 Determine the position of the variable in the buffer |
---|
| 1288 | ! If it is instantaneous output then we do not use the buffer |
---|
| 1289 | !- |
---|
| 1290 | IF (check) WRITE(*,*) "histdef : 3.0" |
---|
| 1291 | !- |
---|
| 1292 | ! 3.1 We get the size of the arrays histwrite will get and check |
---|
| 1293 | ! that they fit into the tmp_buffer |
---|
| 1294 | !- |
---|
| 1295 | buff_sz = zsize(pfileid,iv,1)*zsize(pfileid,iv,2)*zsize(pfileid,iv,3) |
---|
| 1296 | !- |
---|
| 1297 | ! 3.2 move the pointer of the buffer array for operation |
---|
| 1298 | ! which need bufferisation |
---|
| 1299 | !- |
---|
| 1300 | IF ( (TRIM(tmp_topp) /= "inst") & |
---|
| 1301 | & .AND.(TRIM(tmp_topp) /= "once") & |
---|
| 1302 | & .AND.(TRIM(tmp_topp) /= "never") )THEN |
---|
| 1303 | point(pfileid,iv) = buff_pos+1 |
---|
| 1304 | buff_pos = buff_pos+buff_sz |
---|
| 1305 | IF (check) THEN |
---|
| 1306 | WRITE(*,*) "histdef : 3.2 bufpos for iv = ",iv, & |
---|
| 1307 | & " pfileid = ",pfileid," is = ",point(pfileid,iv) |
---|
| 1308 | ENDIF |
---|
| 1309 | ENDIF |
---|
| 1310 | !- |
---|
| 1311 | ! 4.0 Transfer the frequency of the operations and check |
---|
| 1312 | ! for validity. We have to pay attention to negative values |
---|
| 1313 | ! of the frequency which indicate monthly time-steps. |
---|
| 1314 | ! The strategy is to bring it back to seconds for the tests |
---|
| 1315 | !- |
---|
| 1316 | IF (check) WRITE(*,*) "histdef : 4.0" |
---|
| 1317 | !- |
---|
| 1318 | freq_opp(pfileid,iv) = pfreq_opp |
---|
| 1319 | freq_wrt(pfileid,iv) = pfreq_wrt |
---|
| 1320 | !- |
---|
[362] | 1321 | CALL ioget_calendar(un_an,un_jour) |
---|
[358] | 1322 | IF (pfreq_opp < 0) THEN |
---|
[4] | 1323 | CALL ioget_calendar(un_an) |
---|
| 1324 | test_fopp = pfreq_opp*(-1.)*un_an/12.*un_jour |
---|
| 1325 | ELSE |
---|
| 1326 | test_fopp = pfreq_opp |
---|
| 1327 | ENDIF |
---|
[358] | 1328 | IF (pfreq_wrt < 0) THEN |
---|
[4] | 1329 | CALL ioget_calendar(un_an) |
---|
| 1330 | test_fwrt = pfreq_wrt*(-1.)*un_an/12.*un_jour |
---|
| 1331 | ELSE |
---|
| 1332 | test_fwrt = pfreq_wrt |
---|
| 1333 | ENDIF |
---|
| 1334 | !- |
---|
| 1335 | ! 4.1 Frequency of operations and output should be larger than deltat ! |
---|
| 1336 | !- |
---|
| 1337 | IF (test_fopp < deltat(pfileid)) THEN |
---|
| 1338 | str70 = 'Frequency of operations should be larger than deltat' |
---|
| 1339 | WRITE(str71,'("It is not the case for variable ",a," :",F10.4)') & |
---|
| 1340 | & TRIM(tmp_name),pfreq_opp |
---|
| 1341 | str72 = "PATCH : frequency set to deltat" |
---|
| 1342 | !- |
---|
[362] | 1343 | CALL ipslerr (2,"histdef",str70,str71,str72) |
---|
[4] | 1344 | !- |
---|
| 1345 | freq_opp(pfileid,iv) = deltat(pfileid) |
---|
| 1346 | ENDIF |
---|
| 1347 | !- |
---|
| 1348 | IF (test_fwrt < deltat(pfileid)) THEN |
---|
| 1349 | str70 = 'Frequency of output should be larger than deltat' |
---|
| 1350 | WRITE(str71,'("It is not the case for variable ",a," :",F10.4)') & |
---|
| 1351 | & TRIM(tmp_name),pfreq_wrt |
---|
| 1352 | str72 = "PATCH : frequency set to deltat" |
---|
| 1353 | !- |
---|
[362] | 1354 | CALL ipslerr (2,"histdef",str70,str71,str72) |
---|
[4] | 1355 | !- |
---|
| 1356 | freq_wrt(pfileid,iv) = deltat(pfileid) |
---|
| 1357 | ENDIF |
---|
| 1358 | !- |
---|
| 1359 | ! 4.2 First the existence of the operation is tested and then |
---|
| 1360 | ! its compaticility with the choice of frequencies |
---|
| 1361 | !- |
---|
| 1362 | IF (TRIM(tmp_topp) == "inst") THEN |
---|
| 1363 | IF (test_fopp /= test_fwrt) THEN |
---|
| 1364 | str70 = 'For instantaneous output the frequency '// & |
---|
| 1365 | & 'of operations and output' |
---|
| 1366 | WRITE(str71, & |
---|
| 1367 | & '("should be the same, this was not case for variable ",a)') & |
---|
| 1368 | & TRIM(tmp_name) |
---|
| 1369 | str72 = "PATCH : The smalest frequency of both is used" |
---|
[362] | 1370 | CALL ipslerr (2,"histdef",str70,str71,str72) |
---|
[358] | 1371 | IF (test_fopp < test_fwrt) THEN |
---|
[4] | 1372 | freq_opp(pfileid,iv) = pfreq_opp |
---|
| 1373 | freq_wrt(pfileid,iv) = pfreq_opp |
---|
| 1374 | ELSE |
---|
| 1375 | freq_opp(pfileid,iv) = pfreq_wrt |
---|
| 1376 | freq_wrt(pfileid,iv) = pfreq_wrt |
---|
| 1377 | ENDIF |
---|
| 1378 | ENDIF |
---|
| 1379 | ELSE IF (INDEX(ex_topps,TRIM(tmp_topp)) > 0) THEN |
---|
| 1380 | IF (test_fopp > test_fwrt) THEN |
---|
| 1381 | str70 = 'For averages the frequency of operations '// & |
---|
| 1382 | & 'should be smaller or equal' |
---|
| 1383 | WRITE(str71, & |
---|
| 1384 | & '("to that of output. It is not the case for variable ",a)') & |
---|
| 1385 | & TRIM(tmp_name) |
---|
| 1386 | str72 = 'PATCH : The output frequency is used for both' |
---|
[362] | 1387 | CALL ipslerr (2,"histdef",str70,str71,str72) |
---|
[4] | 1388 | freq_opp(pfileid,iv) = pfreq_wrt |
---|
| 1389 | ENDIF |
---|
| 1390 | ELSE |
---|
| 1391 | WRITE (str70,'("Operation on variable ",a," is unknown")') & |
---|
| 1392 | & TRIM(tmp_name) |
---|
[362] | 1393 | WRITE (str71,'("operation requested is :",a)') tmp_topp |
---|
| 1394 | WRITE (str72,'("File ID :",I3)') pfileid |
---|
| 1395 | CALL ipslerr (3,"histdef",str70,str71,str72) |
---|
[4] | 1396 | ENDIF |
---|
| 1397 | !- |
---|
| 1398 | ! 5.0 Initialize other variables of the common |
---|
| 1399 | !- |
---|
| 1400 | IF (check) WRITE(*,*) "histdef : 5.0" |
---|
| 1401 | !- |
---|
[75] | 1402 | hist_wrt_rng(pfileid,iv) = (PRESENT(var_range)) |
---|
| 1403 | IF (hist_wrt_rng(pfileid,iv)) THEN |
---|
| 1404 | hist_calc_rng(pfileid,iv) = (var_range(1) > var_range(2)) |
---|
| 1405 | IF (hist_calc_rng(pfileid,iv)) THEN |
---|
| 1406 | hist_minmax(pfileid,iv,1:2) = & |
---|
[362] | 1407 | & (/ ABS(missing_val),-ABS(missing_val) /) |
---|
[75] | 1408 | ELSE |
---|
| 1409 | hist_minmax(pfileid,iv,1:2) = var_range(1:2) |
---|
| 1410 | ENDIF |
---|
| 1411 | ENDIF |
---|
[4] | 1412 | !- |
---|
[75] | 1413 | ! - freq_opp(pfileid,iv)/2./deltat(pfileid) |
---|
| 1414 | last_opp(pfileid,iv) = itau0(pfileid) |
---|
| 1415 | ! - freq_wrt(pfileid,iv)/2./deltat(pfileid) |
---|
| 1416 | last_wrt(pfileid,iv) = itau0(pfileid) |
---|
| 1417 | ! - freq_opp(pfileid,iv)/2./deltat(pfileid) |
---|
| 1418 | last_opp_chk(pfileid,iv) = itau0(pfileid) |
---|
| 1419 | ! - freq_wrt(pfileid,iv)/2./deltat(pfileid) |
---|
| 1420 | last_wrt_chk(pfileid,iv) = itau0(pfileid) |
---|
[4] | 1421 | nb_opp(pfileid,iv) = 0 |
---|
| 1422 | nb_wrt(pfileid,iv) = 0 |
---|
| 1423 | !- |
---|
| 1424 | ! 6.0 Get the time axis for this variable |
---|
| 1425 | !- |
---|
| 1426 | IF (check) WRITE(*,*) "histdef : 6.0" |
---|
| 1427 | !- |
---|
[358] | 1428 | IF (freq_wrt(pfileid,iv) > 0) THEN |
---|
[4] | 1429 | WRITE(str10,'(I8.8)') INT(freq_wrt(pfileid,iv)) |
---|
| 1430 | str40 = TRIM(tmp_topp)//"_"//TRIM(str10) |
---|
| 1431 | ELSE |
---|
| 1432 | WRITE(str10,'(I2.2,"month")') ABS(INT(freq_wrt(pfileid,iv))) |
---|
| 1433 | str40 = TRIM(tmp_topp)//"_"//TRIM(str10) |
---|
| 1434 | ENDIF |
---|
[358] | 1435 | CALL find_str (tax_name(pfileid,1:nb_tax(pfileid)),str40,pos) |
---|
[4] | 1436 | !- |
---|
| 1437 | ! No time axis for once, l_max, l_min or never operation |
---|
| 1438 | !- |
---|
| 1439 | IF ( (TRIM(tmp_topp) /= 'once') & |
---|
| 1440 | & .AND.(TRIM(tmp_topp) /= 'never') & |
---|
| 1441 | & .AND.(TRIM(tmp_topp) /= 'l_max') & |
---|
| 1442 | & .AND.(TRIM(tmp_topp) /= 'l_min') ) THEN |
---|
[358] | 1443 | IF (pos < 0) THEN |
---|
[4] | 1444 | nb_tax(pfileid) = nb_tax(pfileid)+1 |
---|
| 1445 | tax_name(pfileid,nb_tax(pfileid)) = str40 |
---|
| 1446 | tax_last(pfileid,nb_tax(pfileid)) = 0 |
---|
| 1447 | var_axid(pfileid,iv) = nb_tax(pfileid) |
---|
| 1448 | ELSE |
---|
| 1449 | var_axid(pfileid,iv) = pos |
---|
| 1450 | ENDIF |
---|
| 1451 | ELSE |
---|
| 1452 | IF (check) WRITE(*,*) "histdef : 7.0 ",TRIM(tmp_topp),'----' |
---|
| 1453 | var_axid(pfileid,iv) = -99 |
---|
| 1454 | ENDIF |
---|
| 1455 | !- |
---|
| 1456 | ! 7.0 prepare frequence of writing and operation |
---|
| 1457 | ! for never or once operation |
---|
| 1458 | !- |
---|
| 1459 | IF ( (TRIM(tmp_topp) == 'once') & |
---|
| 1460 | & .OR.(TRIM(tmp_topp) == 'never') ) THEN |
---|
| 1461 | freq_opp(pfileid,iv) = 0. |
---|
| 1462 | freq_wrt(pfileid,iv) = 0. |
---|
| 1463 | ENDIF |
---|
| 1464 | !--------------------- |
---|
| 1465 | END SUBROUTINE histdef |
---|
| 1466 | !=== |
---|
| 1467 | SUBROUTINE histend (pfileid) |
---|
| 1468 | !--------------------------------------------------------------------- |
---|
| 1469 | !- This subroutine end the decalaration of variables and sets the |
---|
| 1470 | !- time axes in the netcdf file and puts it into the write mode. |
---|
| 1471 | !- |
---|
| 1472 | !- INPUT |
---|
| 1473 | !- |
---|
| 1474 | !- pfileid : ID of the file to be worked on |
---|
| 1475 | !- |
---|
| 1476 | !- VERSION |
---|
| 1477 | !- |
---|
| 1478 | !--------------------------------------------------------------------- |
---|
| 1479 | IMPLICIT NONE |
---|
| 1480 | !- |
---|
[362] | 1481 | INTEGER,INTENT(IN) :: pfileid |
---|
[4] | 1482 | !- |
---|
[362] | 1483 | INTEGER :: ncid,ncvarid,iret,ndim,iv,itx,ziv,itax,dim_cnt |
---|
| 1484 | INTEGER,DIMENSION(4) :: dims |
---|
| 1485 | INTEGER :: year,month,day,hours,minutes |
---|
[4] | 1486 | REAL :: sec |
---|
| 1487 | REAL :: rtime0 |
---|
| 1488 | CHARACTER(LEN=30) :: str30 |
---|
| 1489 | CHARACTER(LEN=120) :: assoc |
---|
| 1490 | CHARACTER(LEN=70) :: str70 |
---|
| 1491 | CHARACTER(LEN=3),DIMENSION(12) :: cal = & |
---|
| 1492 | & (/ 'JAN','FEB','MAR','APR','MAY','JUN', & |
---|
| 1493 | & 'JUL','AUG','SEP','OCT','NOV','DEC' /) |
---|
| 1494 | CHARACTER(LEN=7) :: tmp_opp |
---|
| 1495 | !- |
---|
| 1496 | LOGICAL :: check = .FALSE. |
---|
| 1497 | !--------------------------------------------------------------------- |
---|
| 1498 | ncid = ncdf_ids(pfileid) |
---|
| 1499 | !- |
---|
| 1500 | ! 1.0 Create the time axes |
---|
| 1501 | !- |
---|
| 1502 | IF (check) WRITE(*,*) "histend : 1.0" |
---|
| 1503 | !--- |
---|
| 1504 | iret = NF90_DEF_DIM (ncid,'time_counter',NF90_UNLIMITED,tid(pfileid)) |
---|
| 1505 | !- |
---|
| 1506 | ! 1.1 Define all the time axes needed for this file |
---|
| 1507 | !- |
---|
| 1508 | DO itx=1,nb_tax(pfileid) |
---|
| 1509 | dims(1) = tid(pfileid) |
---|
| 1510 | IF (nb_tax(pfileid) > 1) THEN |
---|
| 1511 | str30 = "t_"//tax_name(pfileid,itx) |
---|
| 1512 | ELSE |
---|
| 1513 | str30 = "time_counter" |
---|
| 1514 | ENDIF |
---|
| 1515 | iret = NF90_DEF_VAR (ncid,str30,NF90_FLOAT, & |
---|
| 1516 | & dims(1),tdimid(pfileid,itx)) |
---|
[362] | 1517 | IF (nb_tax(pfileid) <= 1) THEN |
---|
| 1518 | iret = NF90_PUT_ATT (ncid,tdimid(pfileid,itx),'axis',"T") |
---|
| 1519 | ENDIF |
---|
| 1520 | iret = NF90_PUT_ATT (ncid,tdimid(pfileid,itx),'standard_name',"time") |
---|
[4] | 1521 | !--- |
---|
| 1522 | ! To transform the current itau into a real date and take it |
---|
| 1523 | ! as the origin of the file requires the time counter to change. |
---|
| 1524 | ! Thus it is an operation the user has to ask for. |
---|
| 1525 | ! This function should thus only be re-instated |
---|
| 1526 | ! if there is a ioconf routine to control it. |
---|
| 1527 | !--- |
---|
[362] | 1528 | !-- rtime0 = itau2date(itau0(pfileid),date0(pfileid),deltat(pfileid)) |
---|
[4] | 1529 | rtime0 = date0(pfileid) |
---|
| 1530 | !- |
---|
[362] | 1531 | CALL ju2ymds(rtime0,year,month,day,sec) |
---|
[4] | 1532 | !--- |
---|
| 1533 | ! Catch any error induced by a change in calendar ! |
---|
| 1534 | !--- |
---|
| 1535 | IF (year < 0) THEN |
---|
| 1536 | year = 2000+year |
---|
| 1537 | ENDIF |
---|
| 1538 | !- |
---|
| 1539 | hours = INT(sec/(60.*60.)) |
---|
| 1540 | minutes = INT((sec-hours*60.*60.)/60.) |
---|
| 1541 | sec = sec-(hours*60.*60.+minutes*60.) |
---|
| 1542 | !- |
---|
[240] | 1543 | WRITE (UNIT=str70, & |
---|
| 1544 | & FMT='(A,I4.4,"-",I2.2,"-",I2.2," ",I2.2,":",I2.2,":",I2.2)') & |
---|
| 1545 | & 'seconds since ',year,month,day,hours,minutes,INT(sec) |
---|
[4] | 1546 | iret = NF90_PUT_ATT (ncid,tdimid(pfileid,itx),'units',TRIM(str70)) |
---|
| 1547 | !- |
---|
| 1548 | CALL ioget_calendar (str30) |
---|
| 1549 | iret = NF90_PUT_ATT (ncid,tdimid(pfileid,itx), & |
---|
| 1550 | & 'calendar',TRIM(str30)) |
---|
| 1551 | !- |
---|
| 1552 | iret = NF90_PUT_ATT (ncid,tdimid(pfileid,itx),'title','Time') |
---|
| 1553 | !- |
---|
| 1554 | iret = NF90_PUT_ATT (ncid,tdimid(pfileid,itx), & |
---|
| 1555 | & 'long_name','Time axis') |
---|
| 1556 | !- |
---|
[240] | 1557 | WRITE (UNIT=str70, & |
---|
| 1558 | & FMT='(" ",I4.4,"-",A3,"-",I2.2," ",I2.2,":",I2.2,":",I2.2)') & |
---|
| 1559 | & year,cal(month),day,hours,minutes,INT(sec) |
---|
[4] | 1560 | iret = NF90_PUT_ATT (ncid,tdimid(pfileid,itx), & |
---|
| 1561 | & 'time_origin',TRIM(str70)) |
---|
| 1562 | ENDDO |
---|
| 1563 | !- |
---|
| 1564 | ! 2.0 declare the variables |
---|
| 1565 | !- |
---|
| 1566 | IF (check) WRITE(*,*) "histend : 2.0" |
---|
| 1567 | !- |
---|
| 1568 | DO iv=1,nb_var(pfileid) |
---|
| 1569 | !--- |
---|
| 1570 | itax = var_axid(pfileid,iv) |
---|
| 1571 | !--- |
---|
[358] | 1572 | IF (regular(pfileid) ) THEN |
---|
[362] | 1573 | dims(1:2) = (/ xid(pfileid),yid(pfileid) /) |
---|
[4] | 1574 | dim_cnt = 2 |
---|
| 1575 | ELSE |
---|
| 1576 | dims(1) = xid(pfileid) |
---|
| 1577 | dim_cnt = 1 |
---|
| 1578 | ENDIF |
---|
| 1579 | !--- |
---|
| 1580 | tmp_opp = topp(pfileid,iv) |
---|
| 1581 | ziv = var_zaxid(pfileid,iv) |
---|
| 1582 | !--- |
---|
| 1583 | ! 2.1 dimension of field |
---|
| 1584 | !--- |
---|
[358] | 1585 | IF ((TRIM(tmp_opp) /= 'never')) THEN |
---|
[4] | 1586 | IF ( (TRIM(tmp_opp) /= 'once') & |
---|
| 1587 | & .AND.(TRIM(tmp_opp) /= 'l_max') & |
---|
| 1588 | & .AND.(TRIM(tmp_opp) /= 'l_min') ) THEN |
---|
| 1589 | IF (ziv == -99) THEN |
---|
| 1590 | ndim = dim_cnt+1 |
---|
[362] | 1591 | dims(dim_cnt+1:dim_cnt+2) = (/ tid(pfileid),0 /) |
---|
[4] | 1592 | ELSE |
---|
| 1593 | ndim = dim_cnt+2 |
---|
[362] | 1594 | dims(dim_cnt+1:dim_cnt+2) = (/ zax_ids(pfileid,ziv),tid(pfileid) /) |
---|
[4] | 1595 | ENDIF |
---|
| 1596 | ELSE |
---|
| 1597 | IF (ziv == -99) THEN |
---|
| 1598 | ndim = dim_cnt |
---|
[362] | 1599 | dims(dim_cnt+1:dim_cnt+2) = (/ 0,0 /) |
---|
[4] | 1600 | ELSE |
---|
| 1601 | ndim = dim_cnt+1 |
---|
[362] | 1602 | dims(dim_cnt+1:dim_cnt+2) = (/ zax_ids(pfileid,ziv),0 /) |
---|
[4] | 1603 | ENDIF |
---|
| 1604 | ENDIF |
---|
| 1605 | !- |
---|
[362] | 1606 | iret = NF90_DEF_VAR (ncid,TRIM(name(pfileid,iv)),NF90_FLOAT, & |
---|
[4] | 1607 | & dims(1:ABS(ndim)),ncvarid) |
---|
| 1608 | !- |
---|
| 1609 | ncvar_ids(pfileid,iv) = ncvarid |
---|
| 1610 | !- |
---|
[362] | 1611 | IF (LEN_TRIM(unit_name(pfileid,iv)) > 0) THEN |
---|
| 1612 | iret = NF90_PUT_ATT (ncid,ncvarid,'units', & |
---|
| 1613 | & TRIM(unit_name(pfileid,iv))) |
---|
[358] | 1614 | ENDIF |
---|
[4] | 1615 | !- |
---|
[362] | 1616 | iret = NF90_PUT_ATT (ncid,ncvarid,'_Fillvalue', & |
---|
[4] | 1617 | & REAL(missing_val,KIND=4)) |
---|
[75] | 1618 | IF (hist_wrt_rng(pfileid,iv)) THEN |
---|
| 1619 | iret = NF90_PUT_ATT (ncid,ncvarid,'valid_min', & |
---|
| 1620 | & REAL(hist_minmax(pfileid,iv,1),KIND=4)) |
---|
| 1621 | iret = NF90_PUT_ATT (ncid,ncvarid,'valid_max', & |
---|
| 1622 | & REAL(hist_minmax(pfileid,iv,2),KIND=4)) |
---|
| 1623 | ENDIF |
---|
[362] | 1624 | iret = NF90_PUT_ATT (ncid,ncvarid,'long_name', & |
---|
| 1625 | & TRIM(title(pfileid,iv))) |
---|
[4] | 1626 | iret = NF90_PUT_ATT (ncid,ncvarid,'online_operation', & |
---|
| 1627 | & TRIM(fullop(pfileid,iv))) |
---|
| 1628 | !- |
---|
| 1629 | SELECT CASE(ndim) |
---|
[240] | 1630 | CASE(-3,2:4) |
---|
[4] | 1631 | CASE DEFAULT |
---|
| 1632 | CALL ipslerr (3,"histend", & |
---|
| 1633 | & 'less than 2 or more than 4 dimensions are not', & |
---|
| 1634 | & 'allowed at this stage',' ') |
---|
| 1635 | END SELECT |
---|
| 1636 | !- |
---|
[362] | 1637 | assoc=TRIM(hax_name(pfileid,var_haxid(pfileid,iv),2)) & |
---|
| 1638 | & //' '//TRIM(hax_name(pfileid,var_haxid(pfileid,iv),1)) |
---|
| 1639 | !- |
---|
| 1640 | ziv = var_zaxid(pfileid,iv) |
---|
[4] | 1641 | IF (ziv > 0) THEN |
---|
| 1642 | str30 = zax_name(pfileid,ziv) |
---|
| 1643 | assoc = TRIM(str30)//' '//TRIM(assoc) |
---|
| 1644 | ENDIF |
---|
| 1645 | !- |
---|
| 1646 | IF (itax > 0) THEN |
---|
[358] | 1647 | IF (nb_tax(pfileid) > 1) THEN |
---|
[4] | 1648 | str30 = "t_"//tax_name(pfileid,itax) |
---|
| 1649 | ELSE |
---|
| 1650 | str30 = "time_counter" |
---|
| 1651 | ENDIF |
---|
| 1652 | assoc = TRIM(str30)//' '//TRIM(assoc) |
---|
| 1653 | !- |
---|
| 1654 | IF (check) THEN |
---|
| 1655 | WRITE(*,*) "histend : 2.0.n, freq_opp, freq_wrt", & |
---|
[362] | 1656 | & freq_opp(pfileid,iv),freq_wrt(pfileid,iv) |
---|
[4] | 1657 | ENDIF |
---|
| 1658 | !- |
---|
| 1659 | iret = NF90_PUT_ATT (ncid,ncvarid,'interval_operation', & |
---|
| 1660 | & REAL(freq_opp(pfileid,iv),KIND=4)) |
---|
| 1661 | iret = NF90_PUT_ATT (ncid,ncvarid,'interval_write', & |
---|
| 1662 | & REAL(freq_wrt(pfileid,iv),KIND=4)) |
---|
| 1663 | ENDIF |
---|
[358] | 1664 | iret = NF90_PUT_ATT (ncid,ncvarid,'coordinates',TRIM(assoc)) |
---|
[4] | 1665 | ENDIF |
---|
| 1666 | ENDDO |
---|
| 1667 | !- |
---|
[240] | 1668 | ! 2.2 Add DOMAIN attributes if needed |
---|
| 1669 | !- |
---|
| 1670 | IF (dom_id_svg(pfileid) >= 0) THEN |
---|
| 1671 | CALL flio_dom_att (ncid,dom_id_svg(pfileid)) |
---|
| 1672 | ENDIF |
---|
| 1673 | !- |
---|
[358] | 1674 | ! 3.0 Put the netcdf file into write mode |
---|
[4] | 1675 | !- |
---|
| 1676 | IF (check) WRITE(*,*) "histend : 3.0" |
---|
| 1677 | !- |
---|
| 1678 | iret = NF90_ENDDEF (ncid) |
---|
| 1679 | !- |
---|
| 1680 | ! 4.0 Give some informations to the user |
---|
| 1681 | !- |
---|
| 1682 | IF (check) WRITE(*,*) "histend : 4.0" |
---|
| 1683 | !- |
---|
| 1684 | WRITE(str70,'("All variables have been initialized on file :",I3)') pfileid |
---|
| 1685 | CALL ipslerr (1,'histend',str70,'',' ') |
---|
| 1686 | !--------------------- |
---|
| 1687 | END SUBROUTINE histend |
---|
| 1688 | !=== |
---|
| 1689 | SUBROUTINE histwrite_r1d (pfileid,pvarname,pitau,pdata,nbindex,nindex) |
---|
| 1690 | !--------------------------------------------------------------------- |
---|
| 1691 | IMPLICIT NONE |
---|
| 1692 | !- |
---|
[362] | 1693 | INTEGER,INTENT(IN) :: pfileid,pitau,nbindex |
---|
| 1694 | INTEGER,DIMENSION(nbindex),INTENT(IN) :: nindex |
---|
[4] | 1695 | REAL,DIMENSION(:),INTENT(IN) :: pdata |
---|
| 1696 | CHARACTER(LEN=*),INTENT(IN) :: pvarname |
---|
| 1697 | !--------------------------------------------------------------------- |
---|
[362] | 1698 | CALL histw_rnd (pfileid,pvarname,pitau,nbindex,nindex,pdata_1d=pdata) |
---|
[4] | 1699 | !--------------------------- |
---|
| 1700 | END SUBROUTINE histwrite_r1d |
---|
| 1701 | !=== |
---|
| 1702 | SUBROUTINE histwrite_r2d (pfileid,pvarname,pitau,pdata,nbindex,nindex) |
---|
| 1703 | !--------------------------------------------------------------------- |
---|
| 1704 | IMPLICIT NONE |
---|
| 1705 | !- |
---|
[362] | 1706 | INTEGER,INTENT(IN) :: pfileid,pitau,nbindex |
---|
| 1707 | INTEGER,DIMENSION(nbindex),INTENT(IN) :: nindex |
---|
[4] | 1708 | REAL,DIMENSION(:,:),INTENT(IN) :: pdata |
---|
| 1709 | CHARACTER(LEN=*),INTENT(IN) :: pvarname |
---|
| 1710 | !--------------------------------------------------------------------- |
---|
[362] | 1711 | CALL histw_rnd (pfileid,pvarname,pitau,nbindex,nindex,pdata_2d=pdata) |
---|
[4] | 1712 | !--------------------------- |
---|
| 1713 | END SUBROUTINE histwrite_r2d |
---|
| 1714 | !=== |
---|
| 1715 | SUBROUTINE histwrite_r3d (pfileid,pvarname,pitau,pdata,nbindex,nindex) |
---|
| 1716 | !--------------------------------------------------------------------- |
---|
| 1717 | IMPLICIT NONE |
---|
| 1718 | !- |
---|
[362] | 1719 | INTEGER,INTENT(IN) :: pfileid,pitau,nbindex |
---|
| 1720 | INTEGER,DIMENSION(nbindex),INTENT(IN) :: nindex |
---|
[4] | 1721 | REAL,DIMENSION(:,:,:),INTENT(IN) :: pdata |
---|
| 1722 | CHARACTER(LEN=*),INTENT(IN) :: pvarname |
---|
[362] | 1723 | !--------------------------------------------------------------------- |
---|
| 1724 | CALL histw_rnd (pfileid,pvarname,pitau,nbindex,nindex,pdata_3d=pdata) |
---|
| 1725 | !--------------------------- |
---|
| 1726 | END SUBROUTINE histwrite_r3d |
---|
| 1727 | !=== |
---|
| 1728 | SUBROUTINE histw_rnd (pfileid,pvarname,pitau,nbindex,nindex, & |
---|
| 1729 | & pdata_1d,pdata_2d,pdata_3d) |
---|
| 1730 | !--------------------------------------------------------------------- |
---|
| 1731 | IMPLICIT NONE |
---|
[4] | 1732 | !- |
---|
[362] | 1733 | INTEGER,INTENT(IN) :: pfileid,pitau,nbindex |
---|
| 1734 | INTEGER,DIMENSION(nbindex),INTENT(IN) :: nindex |
---|
| 1735 | CHARACTER(LEN=*),INTENT(IN) :: pvarname |
---|
| 1736 | REAL,DIMENSION(:),INTENT(IN),OPTIONAL :: pdata_1d |
---|
| 1737 | REAL,DIMENSION(:,:),INTENT(IN),OPTIONAL :: pdata_2d |
---|
| 1738 | REAL,DIMENSION(:,:,:),INTENT(IN),OPTIONAL :: pdata_3d |
---|
| 1739 | !- |
---|
| 1740 | LOGICAL :: do_oper,do_write,largebuf,l1d,l2d,l3d |
---|
| 1741 | INTEGER :: varid,io,nbpt_out |
---|
| 1742 | INTEGER :: nbpt_in1 |
---|
| 1743 | INTEGER,DIMENSION(2) :: nbpt_in2 |
---|
| 1744 | INTEGER,DIMENSION(3) :: nbpt_in3 |
---|
| 1745 | REAL,ALLOCATABLE,SAVE :: buff_tmp(:) |
---|
[4] | 1746 | INTEGER,SAVE :: buff_tmp_sz |
---|
| 1747 | CHARACTER(LEN=7) :: tmp_opp |
---|
[362] | 1748 | CHARACTER(LEN=13) :: c_nam |
---|
[4] | 1749 | !- |
---|
| 1750 | LOGICAL :: check = .FALSE. |
---|
| 1751 | !--------------------------------------------------------------------- |
---|
[362] | 1752 | l1d=PRESENT(pdata_1d); l2d=PRESENT(pdata_2d); l3d=PRESENT(pdata_3d); |
---|
| 1753 | IF (l1d) THEN |
---|
| 1754 | c_nam = 'histwrite_r1d' |
---|
| 1755 | ELSE IF (l2d) THEN |
---|
| 1756 | c_nam = 'histwrite_r2d' |
---|
| 1757 | ELSE IF (l3d) THEN |
---|
| 1758 | c_nam = 'histwrite_r3d' |
---|
| 1759 | ENDIF |
---|
[4] | 1760 | !- |
---|
| 1761 | ! 1.0 Try to catch errors like specifying the wrong file ID. |
---|
| 1762 | ! Thanks Marine for showing us what errors users can make ! |
---|
| 1763 | !- |
---|
| 1764 | IF ( (pfileid < 1).OR.(pfileid > nb_files) ) THEN |
---|
| 1765 | CALL ipslerr (3,"histwrite", & |
---|
| 1766 | & 'Illegal file ID in the histwrite of variable',pvarname,' ') |
---|
| 1767 | ENDIF |
---|
| 1768 | !- |
---|
| 1769 | ! 1.1 Find the id of the variable to be written and the real time |
---|
| 1770 | !- |
---|
| 1771 | CALL histvar_seq (pfileid,pvarname,varid) |
---|
| 1772 | !- |
---|
| 1773 | ! 2.0 do nothing for never operation |
---|
| 1774 | !- |
---|
| 1775 | tmp_opp = topp(pfileid,varid) |
---|
| 1776 | !- |
---|
| 1777 | IF (TRIM(tmp_opp) == "never") THEN |
---|
| 1778 | last_opp_chk(pfileid,varid) = -99 |
---|
| 1779 | last_wrt_chk(pfileid,varid) = -99 |
---|
| 1780 | ENDIF |
---|
| 1781 | !- |
---|
| 1782 | ! 3.0 We check if we need to do an operation |
---|
| 1783 | !- |
---|
| 1784 | IF (last_opp_chk(pfileid,varid) == pitau) THEN |
---|
| 1785 | CALL ipslerr (3,"histwrite", & |
---|
| 1786 | & 'This variable as already been analysed at the present', & |
---|
| 1787 | & 'time step',' ') |
---|
| 1788 | ENDIF |
---|
| 1789 | !- |
---|
| 1790 | CALL isittime & |
---|
[362] | 1791 | & (pitau,date0(pfileid),deltat(pfileid),freq_opp(pfileid,varid), & |
---|
| 1792 | & last_opp(pfileid,varid),last_opp_chk(pfileid,varid),do_oper) |
---|
[4] | 1793 | !- |
---|
| 1794 | ! 4.0 We check if we need to write the data |
---|
| 1795 | !- |
---|
| 1796 | IF (last_wrt_chk(pfileid,varid) == pitau) THEN |
---|
| 1797 | CALL ipslerr (3,"histwrite", & |
---|
| 1798 | & 'This variable as already been written for the present', & |
---|
| 1799 | & 'time step',' ') |
---|
| 1800 | ENDIF |
---|
| 1801 | !- |
---|
| 1802 | CALL isittime & |
---|
[362] | 1803 | & (pitau,date0(pfileid),deltat(pfileid),freq_wrt(pfileid,varid), & |
---|
| 1804 | & last_wrt(pfileid,varid),last_wrt_chk(pfileid,varid),do_write) |
---|
[4] | 1805 | !- |
---|
| 1806 | ! 5.0 histwrite called |
---|
| 1807 | !- |
---|
| 1808 | IF (do_oper.OR.do_write) THEN |
---|
| 1809 | !- |
---|
| 1810 | !-- 5.1 Get the sizes of the data we will handle |
---|
| 1811 | !- |
---|
| 1812 | IF (datasz_in(pfileid,varid,1) <= 0) THEN |
---|
| 1813 | !---- There is the risk here that the user has over-sized the array. |
---|
| 1814 | !---- But how can we catch this ? |
---|
| 1815 | !---- In the worst case we will do impossible operations |
---|
| 1816 | !---- on part of the data ! |
---|
[362] | 1817 | datasz_in(pfileid,varid,1:3) = -1 |
---|
| 1818 | IF (l1d) THEN |
---|
| 1819 | datasz_in(pfileid,varid,1) = SIZE(pdata_1d) |
---|
| 1820 | ELSE IF (l2d) THEN |
---|
| 1821 | datasz_in(pfileid,varid,1) = SIZE(pdata_2d,DIM=1) |
---|
| 1822 | datasz_in(pfileid,varid,2) = SIZE(pdata_2d,DIM=2) |
---|
| 1823 | ELSE IF (l3d) THEN |
---|
| 1824 | datasz_in(pfileid,varid,1) = SIZE(pdata_3d,DIM=1) |
---|
| 1825 | datasz_in(pfileid,varid,2) = SIZE(pdata_3d,DIM=2) |
---|
| 1826 | datasz_in(pfileid,varid,3) = SIZE(pdata_3d,DIM=3) |
---|
| 1827 | ENDIF |
---|
[4] | 1828 | ENDIF |
---|
| 1829 | !- |
---|
| 1830 | !-- 5.2 The maximum size of the data will give the size of the buffer |
---|
| 1831 | !- |
---|
| 1832 | IF (datasz_max(pfileid,varid) <= 0) THEN |
---|
| 1833 | largebuf = .FALSE. |
---|
[362] | 1834 | DO io=1,nbopp(pfileid,varid) |
---|
[4] | 1835 | IF (INDEX(fuchnbout,sopps(pfileid,varid,io)) > 0) THEN |
---|
| 1836 | largebuf = .TRUE. |
---|
| 1837 | ENDIF |
---|
| 1838 | ENDDO |
---|
| 1839 | IF (largebuf) THEN |
---|
| 1840 | datasz_max(pfileid,varid) = & |
---|
| 1841 | & scsize(pfileid,varid,1) & |
---|
| 1842 | & *scsize(pfileid,varid,2) & |
---|
| 1843 | & *scsize(pfileid,varid,3) |
---|
| 1844 | ELSE |
---|
[362] | 1845 | IF (l1d) THEN |
---|
| 1846 | datasz_max(pfileid,varid) = & |
---|
| 1847 | & datasz_in(pfileid,varid,1) |
---|
| 1848 | ELSE IF (l2d) THEN |
---|
| 1849 | datasz_max(pfileid,varid) = & |
---|
| 1850 | & datasz_in(pfileid,varid,1) & |
---|
| 1851 | & *datasz_in(pfileid,varid,2) |
---|
| 1852 | ELSE IF (l3d) THEN |
---|
| 1853 | datasz_max(pfileid,varid) = & |
---|
| 1854 | & datasz_in(pfileid,varid,1) & |
---|
| 1855 | & *datasz_in(pfileid,varid,2) & |
---|
| 1856 | & *datasz_in(pfileid,varid,3) |
---|
| 1857 | ENDIF |
---|
[4] | 1858 | ENDIF |
---|
| 1859 | ENDIF |
---|
| 1860 | !- |
---|
| 1861 | IF (.NOT.ALLOCATED(buff_tmp)) THEN |
---|
| 1862 | IF (check) THEN |
---|
| 1863 | WRITE(*,*) & |
---|
[362] | 1864 | & c_nam//" : allocate buff_tmp for buff_sz = ", & |
---|
[4] | 1865 | & datasz_max(pfileid,varid) |
---|
| 1866 | ENDIF |
---|
| 1867 | ALLOCATE (buff_tmp(datasz_max(pfileid,varid))) |
---|
| 1868 | buff_tmp_sz = datasz_max(pfileid,varid) |
---|
| 1869 | ELSE IF (datasz_max(pfileid,varid) > buff_tmp_sz) THEN |
---|
| 1870 | IF (check) THEN |
---|
| 1871 | WRITE(*,*) & |
---|
[362] | 1872 | & c_nam//" : re-allocate buff_tmp for buff_sz = ", & |
---|
[4] | 1873 | & datasz_max(pfileid,varid) |
---|
| 1874 | ENDIF |
---|
| 1875 | DEALLOCATE (buff_tmp) |
---|
| 1876 | ALLOCATE (buff_tmp(datasz_max(pfileid,varid))) |
---|
| 1877 | buff_tmp_sz = datasz_max(pfileid,varid) |
---|
| 1878 | ENDIF |
---|
| 1879 | !- |
---|
| 1880 | !-- We have to do the first operation anyway. |
---|
| 1881 | !-- Thus we do it here and change the ranke |
---|
| 1882 | !-- of the data at the same time. This should speed up things. |
---|
| 1883 | !- |
---|
| 1884 | nbpt_out = datasz_max(pfileid,varid) |
---|
[362] | 1885 | IF (l1d) THEN |
---|
| 1886 | nbpt_in1 = datasz_in(pfileid,varid,1) |
---|
| 1887 | CALL mathop (sopps(pfileid,varid,1),nbpt_in1,pdata_1d, & |
---|
| 1888 | & missing_val,nbindex,nindex, & |
---|
| 1889 | & scal(pfileid,varid,1),nbpt_out,buff_tmp) |
---|
| 1890 | ELSE IF (l2d) THEN |
---|
| 1891 | nbpt_in2(1:2) = datasz_in(pfileid,varid,1:2) |
---|
| 1892 | CALL mathop (sopps(pfileid,varid,1),nbpt_in2,pdata_2d, & |
---|
| 1893 | & missing_val,nbindex,nindex, & |
---|
| 1894 | & scal(pfileid,varid,1),nbpt_out,buff_tmp) |
---|
| 1895 | ELSE IF (l3d) THEN |
---|
| 1896 | nbpt_in3(1:3) = datasz_in(pfileid,varid,1:3) |
---|
| 1897 | CALL mathop (sopps(pfileid,varid,1),nbpt_in3,pdata_3d, & |
---|
| 1898 | & missing_val,nbindex,nindex, & |
---|
| 1899 | & scal(pfileid,varid,1),nbpt_out,buff_tmp) |
---|
| 1900 | ENDIF |
---|
| 1901 | CALL histwrite_real (pfileid,varid,pitau,nbpt_out, & |
---|
| 1902 | & buff_tmp,nbindex,nindex,do_oper,do_write) |
---|
[4] | 1903 | ENDIF |
---|
| 1904 | !- |
---|
| 1905 | ! 6.0 Manage time steps |
---|
| 1906 | !- |
---|
| 1907 | IF ((TRIM(tmp_opp) /= "once").AND.(TRIM(tmp_opp) /= "never")) THEN |
---|
| 1908 | last_opp_chk(pfileid,varid) = pitau |
---|
| 1909 | last_wrt_chk(pfileid,varid) = pitau |
---|
| 1910 | ELSE |
---|
| 1911 | last_opp_chk(pfileid,varid) = -99 |
---|
| 1912 | last_wrt_chk(pfileid,varid) = -99 |
---|
| 1913 | ENDIF |
---|
[362] | 1914 | !----------------------- |
---|
| 1915 | END SUBROUTINE histw_rnd |
---|
[4] | 1916 | !=== |
---|
| 1917 | SUBROUTINE histwrite_real & |
---|
| 1918 | & (pfileid,varid,pitau,nbdpt,buff_tmp,nbindex,nindex,do_oper,do_write) |
---|
| 1919 | !--------------------------------------------------------------------- |
---|
| 1920 | !- This subroutine is internal and does the calculations and writing |
---|
| 1921 | !- if needed. At a later stage it should be split into an operation |
---|
| 1922 | !- and writing subroutines. |
---|
| 1923 | !--------------------------------------------------------------------- |
---|
| 1924 | IMPLICIT NONE |
---|
| 1925 | !- |
---|
| 1926 | INTEGER,INTENT(IN) :: pfileid,pitau,varid, & |
---|
| 1927 | & nbindex,nindex(nbindex),nbdpt |
---|
| 1928 | REAL,DIMENSION(:) :: buff_tmp |
---|
| 1929 | LOGICAL,INTENT(IN) :: do_oper,do_write |
---|
| 1930 | !- |
---|
[362] | 1931 | INTEGER :: tsz,ncid,ncvarid,i,iret,ipt,itax,io,nbin,nbout |
---|
| 1932 | INTEGER,DIMENSION(4) :: corner,edges |
---|
[4] | 1933 | INTEGER :: itime |
---|
| 1934 | !- |
---|
| 1935 | REAL :: rtime |
---|
| 1936 | CHARACTER(LEN=7) :: tmp_opp |
---|
| 1937 | REAL,ALLOCATABLE,SAVE :: buff_tmp2(:) |
---|
| 1938 | INTEGER,SAVE :: buff_tmp2_sz |
---|
| 1939 | REAL,ALLOCATABLE,SAVE :: buffer_used(:) |
---|
| 1940 | INTEGER,SAVE :: buffer_sz |
---|
| 1941 | !- |
---|
| 1942 | LOGICAL :: check = .FALSE. |
---|
| 1943 | !--------------------------------------------------------------------- |
---|
| 1944 | IF (check) THEN |
---|
[362] | 1945 | WRITE(*,*) "histwrite 0.0 : VAR : ",name(pfileid,varid) |
---|
| 1946 | WRITE(*,*) "histwrite 0.0 : nbindex,nindex :", & |
---|
[4] | 1947 | & nbindex,nindex(1:MIN(3,nbindex)),'...',nindex(MAX(1,nbindex-3):nbindex) |
---|
| 1948 | ENDIF |
---|
| 1949 | !- |
---|
| 1950 | ! The sizes which can be encoutered |
---|
| 1951 | !- |
---|
| 1952 | tsz = zsize(pfileid,varid,1)*zsize(pfileid,varid,2)*zsize(pfileid,varid,3) |
---|
| 1953 | !- |
---|
| 1954 | ! 1.0 We allocate the memory needed to store the data between write |
---|
| 1955 | ! and the temporary space needed for operations. |
---|
| 1956 | ! We have to keep precedent buffer if needed |
---|
| 1957 | !- |
---|
| 1958 | IF (.NOT. ALLOCATED(buffer)) THEN |
---|
| 1959 | IF (check) WRITE(*,*) "histwrite_real 1.0 allocate buffer ",buff_pos |
---|
| 1960 | ALLOCATE(buffer(buff_pos)) |
---|
| 1961 | buffer_sz = buff_pos |
---|
| 1962 | buffer(:)=0.0 |
---|
| 1963 | ELSE IF (buffer_sz < buff_pos) THEN |
---|
| 1964 | IF (check) WRITE(*,*) "histwrite_real 1.0.1 re-allocate buffer for ",buff_pos," instead of ",SIZE(buffer) |
---|
| 1965 | IF (SUM(buffer)/=0.0) THEN |
---|
| 1966 | IF (check) WRITE (*,*) ' histwrite : buffer has been used. We have to save it before re-allocating it ' |
---|
| 1967 | ALLOCATE (buffer_used(buffer_sz)) |
---|
| 1968 | buffer_used(:)=buffer(:) |
---|
| 1969 | DEALLOCATE (buffer) |
---|
| 1970 | ALLOCATE (buffer(buff_pos)) |
---|
| 1971 | buffer_sz = buff_pos |
---|
| 1972 | buffer(:SIZE(buffer_used))=buffer_used |
---|
| 1973 | DEALLOCATE (buffer_used) |
---|
| 1974 | ELSE |
---|
| 1975 | IF (check) WRITE (*,*) ' histwrite : buffer has not been used. We have just to re-allocating it ' |
---|
| 1976 | DEALLOCATE (buffer) |
---|
| 1977 | ALLOCATE (buffer(buff_pos)) |
---|
| 1978 | buffer_sz = buff_pos |
---|
| 1979 | buffer(:)=0.0 |
---|
| 1980 | ENDIF |
---|
| 1981 | ENDIF |
---|
| 1982 | !- |
---|
| 1983 | ! The buffers are only deallocated when more space is needed. This |
---|
| 1984 | ! reduces the umber of allocates but increases memory needs. |
---|
| 1985 | !- |
---|
| 1986 | IF (.NOT.ALLOCATED(buff_tmp2)) THEN |
---|
| 1987 | IF (check) THEN |
---|
| 1988 | WRITE(*,*) "histwrite_real 1.1 allocate buff_tmp2 ",SIZE(buff_tmp) |
---|
| 1989 | ENDIF |
---|
| 1990 | ALLOCATE (buff_tmp2(datasz_max(pfileid,varid))) |
---|
| 1991 | buff_tmp2_sz = datasz_max(pfileid,varid) |
---|
[358] | 1992 | ELSE IF (datasz_max(pfileid,varid) > buff_tmp2_sz) THEN |
---|
[4] | 1993 | IF (check) THEN |
---|
| 1994 | WRITE(*,*) "histwrite_real 1.2 re-allocate buff_tmp2 : ", & |
---|
| 1995 | & SIZE(buff_tmp)," instead of ",SIZE(buff_tmp2) |
---|
| 1996 | ENDIF |
---|
| 1997 | DEALLOCATE (buff_tmp2) |
---|
| 1998 | ALLOCATE (buff_tmp2(datasz_max(pfileid,varid))) |
---|
| 1999 | buff_tmp2_sz = datasz_max(pfileid,varid) |
---|
| 2000 | ENDIF |
---|
| 2001 | !- |
---|
| 2002 | rtime = pitau * deltat(pfileid) |
---|
| 2003 | tmp_opp = topp(pfileid,varid) |
---|
| 2004 | !- |
---|
| 2005 | ! 3.0 Do the operations or transfer the slab of data into buff_tmp |
---|
| 2006 | !- |
---|
[362] | 2007 | IF (check) WRITE(*,*) "histwrite: 3.0",pfileid |
---|
[4] | 2008 | !- |
---|
| 2009 | ! 3.1 DO the Operations only if needed |
---|
| 2010 | !- |
---|
[358] | 2011 | IF (do_oper) THEN |
---|
[4] | 2012 | i = pfileid |
---|
| 2013 | nbout = nbdpt |
---|
| 2014 | !- |
---|
| 2015 | !-- 3.4 We continue the sequence of operations |
---|
| 2016 | !-- we started in the interface routine |
---|
| 2017 | !- |
---|
[362] | 2018 | DO io = 2,nbopp(i,varid),2 |
---|
[4] | 2019 | nbin = nbout |
---|
| 2020 | nbout = datasz_max(i,varid) |
---|
| 2021 | CALL mathop(sopps(i,varid,io),nbin,buff_tmp,missing_val, & |
---|
| 2022 | & nbindex,nindex,scal(i,varid,io),nbout,buff_tmp2) |
---|
| 2023 | IF (check) THEN |
---|
| 2024 | WRITE(*,*) & |
---|
| 2025 | & "histwrite: 3.4a nbout : ",nbin,nbout,sopps(i,varid,io) |
---|
| 2026 | ENDIF |
---|
| 2027 | !- |
---|
| 2028 | nbin = nbout |
---|
| 2029 | nbout = datasz_max(i,varid) |
---|
| 2030 | CALL mathop(sopps(i,varid,io+1),nbin,buff_tmp2,missing_val, & |
---|
| 2031 | & nbindex,nindex,scal(i,varid,io+1),nbout,buff_tmp) |
---|
| 2032 | IF (check) THEN |
---|
| 2033 | WRITE(*,*) & |
---|
| 2034 | & "histwrite: 3.4b nbout : ",nbin,nbout,sopps(i,varid,io+1) |
---|
| 2035 | ENDIF |
---|
| 2036 | ENDDO |
---|
| 2037 | !- |
---|
| 2038 | ! 3.5 Zoom into the data |
---|
| 2039 | !- |
---|
| 2040 | IF (check) THEN |
---|
| 2041 | WRITE(*,*) & |
---|
| 2042 | & "histwrite: 3.5 size(buff_tmp) : ",SIZE(buff_tmp) |
---|
| 2043 | WRITE(*,*) & |
---|
| 2044 | & "histwrite: 3.5 slab in X :",zorig(i,varid,1),zsize(i,varid,1) |
---|
| 2045 | WRITE(*,*) & |
---|
| 2046 | & "histwrite: 3.5 slab in Y :",zorig(i,varid,2),zsize(i,varid,2) |
---|
| 2047 | WRITE(*,*) & |
---|
| 2048 | & "histwrite: 3.5 slab in Z :",zorig(i,varid,3),zsize(i,varid,3) |
---|
| 2049 | WRITE(*,*) & |
---|
| 2050 | & "histwrite: 3.5 slab of input:", & |
---|
| 2051 | & scsize(i,varid,1),scsize(i,varid,2),scsize(i,varid,3) |
---|
| 2052 | ENDIF |
---|
| 2053 | CALL trans_buff & |
---|
| 2054 | & (zorig(i,varid,1),zsize(i,varid,1), & |
---|
| 2055 | & zorig(i,varid,2),zsize(i,varid,2), & |
---|
| 2056 | & zorig(i,varid,3),zsize(i,varid,3), & |
---|
| 2057 | & scsize(i,varid,1),scsize(i,varid,2),scsize(i,varid,3), & |
---|
[362] | 2058 | & buff_tmp,buff_tmp2_sz,buff_tmp2) |
---|
[4] | 2059 | !- |
---|
| 2060 | !-- 4.0 Get the min and max of the field (buff_tmp) |
---|
| 2061 | !- |
---|
| 2062 | IF (check) WRITE(*,*) "histwrite: 4.0 buff_tmp",pfileid,varid, & |
---|
| 2063 | & TRIM(tmp_opp),'----',LEN_TRIM(tmp_opp),nbindex |
---|
| 2064 | !- |
---|
[75] | 2065 | IF (hist_calc_rng(pfileid,varid)) THEN |
---|
| 2066 | hist_minmax(pfileid,varid,1) = & |
---|
| 2067 | & MIN(hist_minmax(pfileid,varid,1), & |
---|
| 2068 | & MINVAL(buff_tmp2(1:tsz),MASK=buff_tmp2(1:tsz) /= missing_val)) |
---|
| 2069 | hist_minmax(pfileid,varid,2) = & |
---|
| 2070 | & MAX(hist_minmax(pfileid,varid,2), & |
---|
| 2071 | & MAXVAL(buff_tmp2(1:tsz),MASK=buff_tmp2(1:tsz) /= missing_val)) |
---|
| 2072 | ENDIF |
---|
[4] | 2073 | !- |
---|
| 2074 | !-- 5.0 Do the operations if needed. In the case of instantaneous |
---|
| 2075 | !-- output we do not transfer to the buffer. |
---|
| 2076 | !- |
---|
[362] | 2077 | IF (check) WRITE(*,*) "histwrite: 5.0",pfileid,"tsz :",tsz |
---|
[4] | 2078 | !- |
---|
| 2079 | ipt = point(pfileid,varid) |
---|
| 2080 | !- |
---|
[362] | 2081 | ! WRITE(*,*) 'OPE ipt, buffer :',pvarname,ipt,varid |
---|
[4] | 2082 | !- |
---|
| 2083 | IF ( (TRIM(tmp_opp) /= "inst") & |
---|
| 2084 | & .AND.(TRIM(tmp_opp) /= "once") ) THEN |
---|
| 2085 | CALL moycum(tmp_opp,tsz,buffer(ipt:), & |
---|
| 2086 | & buff_tmp2,nb_opp(pfileid,varid)) |
---|
| 2087 | ENDIF |
---|
| 2088 | !- |
---|
| 2089 | last_opp(pfileid,varid) = pitau |
---|
| 2090 | nb_opp(pfileid,varid) = nb_opp(pfileid,varid)+1 |
---|
| 2091 | !- |
---|
| 2092 | ENDIF |
---|
| 2093 | !- |
---|
| 2094 | ! 6.0 Write to file if needed |
---|
| 2095 | !- |
---|
[362] | 2096 | IF (check) WRITE(*,*) "histwrite: 6.0",pfileid |
---|
[4] | 2097 | !- |
---|
[358] | 2098 | IF (do_write) THEN |
---|
[4] | 2099 | !- |
---|
| 2100 | ncvarid = ncvar_ids(pfileid,varid) |
---|
| 2101 | ncid = ncdf_ids(pfileid) |
---|
| 2102 | !- |
---|
| 2103 | !-- 6.1 Do the operations that are needed before writting |
---|
| 2104 | !- |
---|
[362] | 2105 | IF (check) WRITE(*,*) "histwrite: 6.1",pfileid |
---|
[4] | 2106 | !- |
---|
| 2107 | IF ( (TRIM(tmp_opp) /= "inst") & |
---|
| 2108 | & .AND.(TRIM(tmp_opp) /= "once") ) THEN |
---|
| 2109 | rtime = (rtime+last_wrt(pfileid,varid)*deltat(pfileid))/2.0 |
---|
| 2110 | ENDIF |
---|
| 2111 | !- |
---|
| 2112 | !-- 6.2 Add a value to the time axis of this variable if needed |
---|
| 2113 | !- |
---|
| 2114 | IF ( (TRIM(tmp_opp) /= "l_max") & |
---|
| 2115 | & .AND.(TRIM(tmp_opp) /= "l_min") & |
---|
| 2116 | & .AND.(TRIM(tmp_opp) /= "once") ) THEN |
---|
| 2117 | !- |
---|
[362] | 2118 | IF (check) WRITE(*,*) "histwrite: 6.2",pfileid |
---|
[4] | 2119 | !- |
---|
[358] | 2120 | itax = var_axid(pfileid,varid) |
---|
| 2121 | itime = nb_wrt(pfileid,varid)+1 |
---|
[4] | 2122 | !- |
---|
[362] | 2123 | IF (tax_last(pfileid,itax) < itime) THEN |
---|
[4] | 2124 | iret = NF90_PUT_VAR (ncid,tdimid(pfileid,itax),(/ rtime /), & |
---|
| 2125 | & start=(/ itime /),count=(/ 1 /)) |
---|
[362] | 2126 | tax_last(pfileid,itax) = itime |
---|
[4] | 2127 | ENDIF |
---|
| 2128 | ELSE |
---|
| 2129 | itime=1 |
---|
| 2130 | ENDIF |
---|
| 2131 | !- |
---|
| 2132 | !-- 6.3 Write the data. Only in the case of instantaneous output |
---|
| 2133 | ! we do not write the buffer. |
---|
| 2134 | !- |
---|
| 2135 | IF (check) THEN |
---|
| 2136 | WRITE(*,*) "histwrite: 6.3",pfileid,ncid,ncvarid,varid,itime |
---|
| 2137 | ENDIF |
---|
| 2138 | !- |
---|
| 2139 | IF (scsize(pfileid,varid,3) == 1) THEN |
---|
| 2140 | IF (regular(pfileid)) THEN |
---|
[362] | 2141 | corner(1:4) = (/ 1,1,itime,0 /) |
---|
[4] | 2142 | edges(1:4) = (/ zsize(pfileid,varid,1), & |
---|
[362] | 2143 | & zsize(pfileid,varid,2),1,0 /) |
---|
[4] | 2144 | ELSE |
---|
[362] | 2145 | corner(1:4) = (/ 1,itime,0,0 /) |
---|
| 2146 | edges(1:4) = (/ zsize(pfileid,varid,1),1,0,0 /) |
---|
[4] | 2147 | ENDIF |
---|
| 2148 | ELSE |
---|
[358] | 2149 | IF (regular(pfileid)) THEN |
---|
[362] | 2150 | corner(1:4) = (/ 1,1,1,itime /) |
---|
[4] | 2151 | edges(1:4) = (/ zsize(pfileid,varid,1), & |
---|
| 2152 | & zsize(pfileid,varid,2), & |
---|
[362] | 2153 | & zsize(pfileid,varid,3),1 /) |
---|
[4] | 2154 | ELSE |
---|
[362] | 2155 | corner(1:4) = (/ 1,1,itime,0 /) |
---|
[4] | 2156 | edges(1:4) = (/ zsize(pfileid,varid,1), & |
---|
[362] | 2157 | & zsize(pfileid,varid,3),1,0 /) |
---|
[4] | 2158 | ENDIF |
---|
| 2159 | ENDIF |
---|
| 2160 | !- |
---|
| 2161 | ipt = point(pfileid,varid) |
---|
| 2162 | !- |
---|
| 2163 | IF ( (TRIM(tmp_opp) /= "inst") & |
---|
| 2164 | & .AND.(TRIM(tmp_opp) /= "once") ) THEN |
---|
| 2165 | iret = NF90_PUT_VAR (ncid,ncvarid,buffer(ipt:), & |
---|
| 2166 | & start=corner(1:4),count=edges(1:4)) |
---|
| 2167 | ELSE |
---|
| 2168 | iret = NF90_PUT_VAR (ncid,ncvarid,buff_tmp2, & |
---|
| 2169 | & start=corner(1:4),count=edges(1:4)) |
---|
| 2170 | ENDIF |
---|
| 2171 | !- |
---|
| 2172 | last_wrt(pfileid,varid) = pitau |
---|
| 2173 | nb_wrt(pfileid,varid) = nb_wrt(pfileid,varid)+1 |
---|
| 2174 | nb_opp(pfileid,varid) = 0 |
---|
| 2175 | !--- |
---|
| 2176 | ! After the write the file can be synchronized so that no data is |
---|
| 2177 | ! lost in case of a crash. This feature gives up on the benefits of |
---|
| 2178 | ! buffering and should only be used in debuging mode. A flag is |
---|
| 2179 | ! needed here to switch to this mode. |
---|
| 2180 | !--- |
---|
| 2181 | ! iret = NF90_SYNC (ncid) |
---|
| 2182 | !- |
---|
| 2183 | ENDIF |
---|
| 2184 | !---------------------------- |
---|
| 2185 | END SUBROUTINE histwrite_real |
---|
| 2186 | !=== |
---|
| 2187 | SUBROUTINE histvar_seq (pfid,pvarname,pvid) |
---|
| 2188 | !--------------------------------------------------------------------- |
---|
| 2189 | !- This subroutine optimized the search for the variable in the table. |
---|
| 2190 | !- In a first phase it will learn the succession of the variables |
---|
| 2191 | !- called and then it will use the table to guess what comes next. |
---|
| 2192 | !- It is the best solution to avoid lengthy searches through array |
---|
| 2193 | !- vectors. |
---|
| 2194 | !- |
---|
| 2195 | !- ARGUMENTS : |
---|
| 2196 | !- |
---|
| 2197 | !- pfid : id of the file on which we work |
---|
| 2198 | !- pvarname : The name of the variable we are looking for |
---|
| 2199 | !- pvid : The var id we found |
---|
| 2200 | !--------------------------------------------------------------------- |
---|
| 2201 | IMPLICIT NONE |
---|
| 2202 | !- |
---|
| 2203 | INTEGER,INTENT(in) :: pfid |
---|
| 2204 | CHARACTER(LEN=*),INTENT(IN) :: pvarname |
---|
| 2205 | INTEGER,INTENT(out) :: pvid |
---|
| 2206 | !- |
---|
| 2207 | LOGICAL,SAVE :: learning(nb_files_max)=.TRUE. |
---|
| 2208 | INTEGER,SAVE :: overlap(nb_files_max) = -1 |
---|
[358] | 2209 | INTEGER,SAVE :: varseq(nb_files_max,nb_var_max*3) |
---|
[4] | 2210 | INTEGER,SAVE :: varseq_len(nb_files_max) = 0 |
---|
| 2211 | INTEGER,SAVE :: varseq_pos(nb_files_max) |
---|
| 2212 | INTEGER,SAVE :: varseq_err(nb_files_max) = 0 |
---|
[358] | 2213 | INTEGER :: ib,sp,nx,pos |
---|
[4] | 2214 | CHARACTER(LEN=70) :: str70 |
---|
| 2215 | !- |
---|
| 2216 | LOGICAL :: check = .FALSE. |
---|
| 2217 | !--------------------------------------------------------------------- |
---|
| 2218 | IF (check) THEN |
---|
| 2219 | WRITE(*,*) 'histvar_seq, start of the subroutine :',learning(pfid) |
---|
| 2220 | ENDIF |
---|
| 2221 | !- |
---|
| 2222 | IF (learning(pfid)) THEN |
---|
| 2223 | !- |
---|
| 2224 | !-- 1.0 We compute the length over which we are going |
---|
| 2225 | !-- to check the overlap |
---|
| 2226 | !- |
---|
| 2227 | IF (overlap(pfid) <= 0) THEN |
---|
| 2228 | IF (nb_var(pfid) > 6) THEN |
---|
| 2229 | overlap(pfid) = nb_var(pfid)/3*2 |
---|
| 2230 | ELSE |
---|
| 2231 | overlap(pfid) = nb_var(pfid) |
---|
| 2232 | ENDIF |
---|
| 2233 | ENDIF |
---|
| 2234 | !- |
---|
| 2235 | !-- 1.1 Find the position of this string |
---|
| 2236 | !- |
---|
[358] | 2237 | CALL find_str (name(pfid,1:nb_var(pfid)),pvarname,pos) |
---|
[4] | 2238 | IF (pos > 0) THEN |
---|
| 2239 | pvid = pos |
---|
| 2240 | ELSE |
---|
| 2241 | CALL ipslerr (3,"histvar_seq", & |
---|
| 2242 | & 'The name of the variable you gave has not been declared', & |
---|
| 2243 | & 'You should use subroutine histdef for declaring variable', & |
---|
[358] | 2244 | & TRIM(pvarname)) |
---|
[4] | 2245 | ENDIF |
---|
| 2246 | !- |
---|
| 2247 | !-- 1.2 If we have not given up we store the position |
---|
| 2248 | !-- in the sequence of calls |
---|
| 2249 | !- |
---|
[358] | 2250 | IF (varseq_err(pfid) >= 0) THEN |
---|
[4] | 2251 | sp = varseq_len(pfid)+1 |
---|
| 2252 | IF (sp <= nb_var_max*3) THEN |
---|
| 2253 | varseq(pfid,sp) = pvid |
---|
| 2254 | varseq_len(pfid) = sp |
---|
| 2255 | ELSE |
---|
| 2256 | CALL ipslerr (2,"histvar_seq",& |
---|
| 2257 | & 'The learning process has failed and we give up. '// & |
---|
| 2258 | & 'Either you sequence is',& |
---|
| 2259 | & 'too complex or I am too dumb. '// & |
---|
| 2260 | & 'This will only affect the efficiency',& |
---|
| 2261 | & 'of your code. Thus if you wish to save time'// & |
---|
| 2262 | & ' contact the IOIPSL team. ') |
---|
| 2263 | WRITE(*,*) 'The sequence we have found up to now :' |
---|
| 2264 | WRITE(*,*) varseq(pfid,1:sp-1) |
---|
| 2265 | varseq_err(pfid) = -1 |
---|
| 2266 | ENDIF |
---|
| 2267 | !- |
---|
| 2268 | !---- 1.3 Check if we have found the right overlap |
---|
| 2269 | !- |
---|
| 2270 | IF (varseq_len(pfid) .GE. overlap(pfid)*2) THEN |
---|
| 2271 | !- |
---|
| 2272 | !------ We skip a few variables if needed as they could come |
---|
| 2273 | !------ from the initialisation of the model. |
---|
| 2274 | !- |
---|
[362] | 2275 | DO ib = 0,sp-overlap(pfid)*2 |
---|
[4] | 2276 | IF ( learning(pfid) .AND.& |
---|
| 2277 | & SUM(ABS(varseq(pfid,ib+1:ib+overlap(pfid)) -& |
---|
| 2278 | & varseq(pfid,sp-overlap(pfid)+1:sp))) == 0 ) THEN |
---|
| 2279 | learning(pfid) = .FALSE. |
---|
| 2280 | varseq_len(pfid) = sp-overlap(pfid)-ib |
---|
| 2281 | varseq_pos(pfid) = overlap(pfid)+ib |
---|
| 2282 | varseq(pfid,1:varseq_len(pfid)) = & |
---|
| 2283 | & varseq(pfid,ib+1:ib+varseq_len(pfid)) |
---|
| 2284 | ENDIF |
---|
| 2285 | ENDDO |
---|
| 2286 | ENDIF |
---|
| 2287 | ENDIF |
---|
| 2288 | ELSE |
---|
| 2289 | !- |
---|
| 2290 | !-- 2.0 Now we know how the calls to histwrite are sequenced |
---|
| 2291 | !-- and we can get a guess at the var ID |
---|
| 2292 | !- |
---|
| 2293 | nx = varseq_pos(pfid)+1 |
---|
| 2294 | IF (nx > varseq_len(pfid)) nx = 1 |
---|
| 2295 | !- |
---|
[358] | 2296 | pvid = varseq(pfid,nx) |
---|
[4] | 2297 | !- |
---|
[358] | 2298 | IF (TRIM(name(pfid,pvid)) /= TRIM(pvarname)) THEN |
---|
| 2299 | CALL find_str (name(pfid,1:nb_var(pfid)),pvarname,pos) |
---|
[4] | 2300 | IF (pos > 0) THEN |
---|
| 2301 | pvid = pos |
---|
| 2302 | ELSE |
---|
| 2303 | CALL ipslerr (3,"histvar_seq", & |
---|
| 2304 | & 'The name of the variable you gave has not been declared',& |
---|
[358] | 2305 | & 'You should use subroutine histdef for declaring variable', & |
---|
| 2306 | & TRIM(pvarname)) |
---|
[4] | 2307 | ENDIF |
---|
| 2308 | varseq_err(pfid) = varseq_err(pfid)+1 |
---|
| 2309 | ELSE |
---|
| 2310 | !- |
---|
| 2311 | !---- We only keep the new position if we have found the variable |
---|
| 2312 | !---- this way. This way an out of sequence call to histwrite does |
---|
| 2313 | !---- not defeat the process. |
---|
| 2314 | !- |
---|
| 2315 | varseq_pos(pfid) = nx |
---|
| 2316 | ENDIF |
---|
| 2317 | !- |
---|
| 2318 | IF (varseq_err(pfid) .GE. 10) THEN |
---|
| 2319 | WRITE(str70,'("for file ",I3)') pfid |
---|
| 2320 | CALL ipslerr (2,"histvar_seq", & |
---|
| 2321 | & 'There were 10 errors in the learned sequence of variables',& |
---|
| 2322 | & str70,'This looks like a bug, please report it.') |
---|
| 2323 | varseq_err(pfid) = 0 |
---|
| 2324 | ENDIF |
---|
| 2325 | ENDIF |
---|
| 2326 | !- |
---|
| 2327 | IF (check) THEN |
---|
| 2328 | WRITE(*,*) & |
---|
| 2329 | & 'histvar_seq, end of the subroutine :',TRIM(pvarname),pvid |
---|
| 2330 | ENDIF |
---|
| 2331 | !------------------------- |
---|
| 2332 | END SUBROUTINE histvar_seq |
---|
| 2333 | !=== |
---|
| 2334 | SUBROUTINE histsync (file) |
---|
| 2335 | !--------------------------------------------------------------------- |
---|
| 2336 | !- This subroutine will synchronise all |
---|
| 2337 | !- (or one if defined) opened files. |
---|
| 2338 | !- |
---|
| 2339 | !- VERSION |
---|
| 2340 | !- |
---|
| 2341 | !--------------------------------------------------------------------- |
---|
| 2342 | IMPLICIT NONE |
---|
| 2343 | !- |
---|
| 2344 | ! file : optional argument for fileid |
---|
| 2345 | INTEGER,INTENT(in),OPTIONAL :: file |
---|
| 2346 | !- |
---|
| 2347 | INTEGER :: ifile,ncid,iret |
---|
| 2348 | !- |
---|
| 2349 | LOGICAL :: file_exists |
---|
| 2350 | LOGICAL :: check = .FALSE. |
---|
| 2351 | !--------------------------------------------------------------------- |
---|
[362] | 2352 | IF (check) WRITE(*,*) 'Entering loop on files :',nb_files |
---|
[4] | 2353 | !- |
---|
| 2354 | ! 1.The loop on files to synchronise |
---|
| 2355 | !- |
---|
| 2356 | DO ifile = 1,nb_files |
---|
| 2357 | !- |
---|
| 2358 | IF (PRESENT(file)) THEN |
---|
| 2359 | file_exists = (ifile == file) |
---|
| 2360 | ELSE |
---|
| 2361 | file_exists = .TRUE. |
---|
| 2362 | ENDIF |
---|
| 2363 | !- |
---|
[358] | 2364 | IF (file_exists) THEN |
---|
[4] | 2365 | IF (check) THEN |
---|
[362] | 2366 | WRITE(*,*) 'Synchronising specified file number :',file |
---|
[4] | 2367 | ENDIF |
---|
| 2368 | ncid = ncdf_ids(ifile) |
---|
| 2369 | iret = NF90_SYNC (ncid) |
---|
| 2370 | ENDIF |
---|
| 2371 | !- |
---|
| 2372 | ENDDO |
---|
| 2373 | !---------------------- |
---|
| 2374 | END SUBROUTINE histsync |
---|
| 2375 | !=== |
---|
| 2376 | SUBROUTINE histclo (fid) |
---|
| 2377 | !--------------------------------------------------------------------- |
---|
| 2378 | !- This subroutine will close all (or one if defined) opened files |
---|
| 2379 | !- |
---|
| 2380 | !- VERSION |
---|
| 2381 | !- |
---|
| 2382 | !--------------------------------------------------------------------- |
---|
| 2383 | IMPLICIT NONE |
---|
| 2384 | !- |
---|
| 2385 | ! fid : optional argument for fileid |
---|
| 2386 | INTEGER,INTENT(in),OPTIONAL :: fid |
---|
| 2387 | !- |
---|
[240] | 2388 | INTEGER :: ifile,ncid,iret,iv |
---|
[4] | 2389 | INTEGER :: start_loop,end_loop |
---|
| 2390 | CHARACTER(LEN=70) :: str70 |
---|
| 2391 | !- |
---|
| 2392 | LOGICAL :: check=.FALSE. |
---|
| 2393 | !--------------------------------------------------------------------- |
---|
[362] | 2394 | IF (check) WRITE(*,*) 'Entering loop on files :',nb_files |
---|
[4] | 2395 | !- |
---|
| 2396 | IF (PRESENT(fid)) THEN |
---|
| 2397 | start_loop = fid |
---|
| 2398 | end_loop = fid |
---|
| 2399 | ELSE |
---|
| 2400 | start_loop = 1 |
---|
| 2401 | end_loop = nb_files |
---|
| 2402 | ENDIF |
---|
| 2403 | !- |
---|
| 2404 | DO ifile=start_loop,end_loop |
---|
[362] | 2405 | IF (check) WRITE(*,*) 'Closing specified file number :',ifile |
---|
[4] | 2406 | ncid = ncdf_ids(ifile) |
---|
| 2407 | iret = NF90_REDEF (ncid) |
---|
[240] | 2408 | !--- |
---|
| 2409 | !-- 1. Loop on the number of variables to add some final information |
---|
| 2410 | !--- |
---|
[362] | 2411 | IF (check) WRITE(*,*) 'Entering loop on vars : ',nb_var(ifile) |
---|
[240] | 2412 | DO iv=1,nb_var(ifile) |
---|
[75] | 2413 | IF (hist_wrt_rng(ifile,iv)) THEN |
---|
| 2414 | IF (check) THEN |
---|
| 2415 | WRITE(*,*) 'min value for file :',ifile,' var n. :',iv, & |
---|
| 2416 | & ' is : ',hist_minmax(ifile,iv,1) |
---|
| 2417 | WRITE(*,*) 'max value for file :',ifile,' var n. :',iv, & |
---|
| 2418 | & ' is : ',hist_minmax(ifile,iv,2) |
---|
| 2419 | ENDIF |
---|
| 2420 | IF (hist_calc_rng(ifile,iv)) THEN |
---|
[240] | 2421 | !-------- Put the min and max values on the file |
---|
| 2422 | iret = NF90_PUT_ATT (ncid,ncvar_ids(ifile,iv),'valid_min', & |
---|
[75] | 2423 | & REAL(hist_minmax(ifile,iv,1),KIND=4)) |
---|
[240] | 2424 | iret = NF90_PUT_ATT (ncid,ncvar_ids(ifile,iv),'valid_max', & |
---|
[75] | 2425 | & REAL(hist_minmax(ifile,iv,2),KIND=4)) |
---|
| 2426 | ENDIF |
---|
[4] | 2427 | ENDIF |
---|
| 2428 | ENDDO |
---|
[240] | 2429 | !--- |
---|
[358] | 2430 | !-- 2. Close the file |
---|
[240] | 2431 | !--- |
---|
[358] | 2432 | IF (check) WRITE(*,*) 'close file :',ncid |
---|
[4] | 2433 | iret = NF90_CLOSE (ncid) |
---|
| 2434 | IF (iret /= NF90_NOERR) THEN |
---|
| 2435 | WRITE(str70,'("This file has been already closed :",I3)') ifile |
---|
[358] | 2436 | CALL ipslerr (2,'histclo',str70,'','') |
---|
[4] | 2437 | ENDIF |
---|
| 2438 | ENDDO |
---|
| 2439 | !--------------------- |
---|
| 2440 | END SUBROUTINE histclo |
---|
| 2441 | !=== |
---|
| 2442 | SUBROUTINE ioconf_modname (str) |
---|
| 2443 | !--------------------------------------------------------------------- |
---|
| 2444 | !- This subroutine allows to configure the name |
---|
| 2445 | !- of the model written into the file |
---|
| 2446 | !--------------------------------------------------------------------- |
---|
| 2447 | IMPLICIT NONE |
---|
| 2448 | !- |
---|
| 2449 | CHARACTER(LEN=*),INTENT(IN) :: str |
---|
| 2450 | !--------------------------------------------------------------------- |
---|
| 2451 | IF (.NOT.lock_modname) THEN |
---|
| 2452 | model_name = str(1:MIN(LEN_TRIM(str),80)) |
---|
| 2453 | lock_modname = .TRUE. |
---|
| 2454 | ELSE |
---|
| 2455 | CALL ipslerr (2,"ioconf_modname", & |
---|
| 2456 | & 'The model name can only be changed once and only', & |
---|
| 2457 | & 'before it is used. It is now set to :',model_name) |
---|
| 2458 | ENDIF |
---|
| 2459 | !---------------------------- |
---|
| 2460 | END SUBROUTINE ioconf_modname |
---|
| 2461 | !- |
---|
| 2462 | !=== |
---|
| 2463 | !- |
---|
| 2464 | !----------------- |
---|
| 2465 | END MODULE histcom |
---|