Changeset 1167


Ignore:
Timestamp:
10/15/10 11:50:49 (14 years ago)
Author:
mafoipsl
Message:

piControlMR1 CMIP5 IPSL simulation registration :

  • README with relevant information :
    • compilation : sxgmake ORCA2xLMD144142-L39
    • COSP outputs frequency ...
  • TS variables verified
  • def and namelist files saved
  • Chunck adapted for Medium Resolution : 144x142
Location:
CMIP5/piControl/piControlMR1
Files:
6 edited

Legend:

Unmodified
Added
Removed

  • CMIP5/piControl/piControlMR1/COMP/lmdz.card

    r1150 r1167  
    1010# LMDZ_Bands_file_name=${ARCHIVE}/IGCM_OUT/IPSLCM5A/DEVT/pdControl/XXXXXX/ATM/Debug/pdControl_XXXXXXX_Bands_96x95x19_3prc.dat_3 
    1111 
    12 # To force higher writing level for aerosol.  
    13 # LMDZ_Freq_aero : frequency for writing (in PeriodLength : 10Years = 120) ,  
    14 # LMDZ_Length_aero : length of writing (in PeriodLength : 1Year = 12).  
    15 # To cancel this option put LMDZ_Length_aero=0 
    16 LMDZ_Freq_aero=120 
    17 LMDZ_Length_aero=12 
    18  
    1912# Set COSP activation and Outputs frequency (monthly, daily, HF) = y/n 
    20 LMDZ_COSP_OK=n 
     13LMDZ_COSP_OK=y 
    2114LMDZ_COSP_monthly=y 
    22 LMDZ_COSP_daily=y 
     15LMDZ_COSP_daily=n 
    2316LMDZ_COSP_hf=n 
    2417 
    … …  
    6255 
    6356[OutputText] 
    64 List=   (lmdz.x.prt) 
     57List=   (physiq.def,used_run.def,used_physiq.def,used_gcm.def) 
    6558 
    6659[OutputFiles] 
    … …  
    8174Patches= () 
    8275GatherWithInternal = (lon, lat, presnivs, time_counter, time_counter_bnds, aire) 
    83 TimeSeriesVars2D = (bils, cldh, cldl, cldm, cldq, cldt, evap, iwp, lwp, LWdnSFC, LWdnSFCclr, LWupSFCclr, LWdn200, LWdn200clr, LWup200, LWup200clr, precip, prw, pluc, psol, q2m, sens, sicf, slp, snow, soll0, soll, sols0, sols, SWdnSFC, SWupSFC, SWup200, SWdnTOA, SWupTOA, SWdn200, SWdnSFCclr, SWupSFCclr, SWupTOAclr, t2m, t2m_max, t2m_min, taux, taux_ter, taux_sic, taux_lic, taux_oce, tauy, tauy_ter, tauy_sic, tauy_lic, tauy_oce, lat_ter, lat_sic, lat_lic, lat_oce, nettop, paprs, pbase, ptop, topl0, topl, tops0, tops, topswad, topswai, tsol, tsol_ter, tsol_lic, tsol_oce, tsol_sic , u10m, u500, v10m, v500, w500, pourc_ter, pourc_oce, pourc_sic, pourc_lic, wind10m, od550aer, od550lt1aer, absvisaer, loadoa, loadbc, loadso4, loaddust, loadss, sconcoa, sconcbc, sconcso4, sconcdust, sconcss, reffclwtop, cldncl) 
     76TimeSeriesVars2D = (bils, cldh, cldl, cldm, cldq, cldt, evap, flat, iwp, lwp, LWdnSFC, LWdnSFCclr, LWupSFCclr, LWdn200, LWdn200clr, LWup200, LWup200clr, precip, prw, pluc, psol, q2m, rh2m, sens, sicf, slp, snow, soll0, soll, sols0, sols, SWdnSFC, SWupSFC, SWup200, SWdnTOA, SWupTOA, SWdn200, SWdnSFCclr, SWupSFCclr, SWupTOAclr, t2m, t2m_max, t2m_min, taux, taux_ter, taux_sic, taux_lic, taux_oce, tauy, tauy_ter, tauy_sic, tauy_lic, tauy_oce, lat_ter, lat_sic, lat_lic, lat_oce, nettop, paprs, pbase, ptop, topl0, topl, tops0, tops, topswad, topswai, tsol, tsol_ter, tsol_lic, tsol_oce, tsol_sic , u10m, u500, v10m, v500, w500, pourc_ter, pourc_oce, pourc_sic, pourc_lic, wind10m, od550aer, od550lt1aer, absvisaer, loadoa, loadbc, loadso4, loaddust, loadss, sconcoa, sconcbc, sconcso4, sconcdust, sconcss, reffclwtop, cldncl) 
    8477ChunckJob2D = NONE 
    8578TimeSeriesVars3D = (upwd, lwcon, iwcon, temp, theta, ovap, ovapinit, geop, vitu, vitv, vitw, pres, rneb, rnebcon, rhum, ec550aer, concoa, concbc, concso4, concss, concdust, reffclws, reffclwc, Aga) 
    86 ChunckJob3D = 100Y 
     79ChunckJob3D = 50Y 
    8780Seasonal=ON 
    8881 
    … …  
    118111GatherWithInternal = (lon, lat, presnivs, time_counter, time_counter_bnds) 
    119112TimeSeriesVars2D = (bils, cldh, cldl, cldm, cldq, cldt, evap, flat, precip, pluc, plul, prw, psol, q2m, sens, sicf, slp, soll, sols, SWdnSFC, t2m, t2m_max, t2m_min, topl, tops, tsol, u10m, v10m, wind10m, wind10max) 
    120 ChunckJob2D = 200Y 
     113ChunckJob2D = 50Y 
    121114TimeSeriesVars3D = (rhum, temp, theta, ovap, geop, vitu, vitv, vitw, pres) 
    122115ChunckJob3D = OFF 
    … …  
    145138GatherWithInternal = (lon, lat, presnivs, time_counter, time_counter_bnds) 
    146139TimeSeriesVars2D = (cldt, psol, q2m, slp, SWnetOR, SWdownOR, LWdownOR, precip, pluc, plul, t2m, tsol, u10m, v10m) 
    147 ChunckJob2D = 50Y 
     140ChunckJob2D = 20Y 
    148141TimeSeriesVars3D = () 
    149142ChunckJob3D = OFF 
    … …  
    165158ChunckJob2D = NONE 
    166159TimeSeriesVars3D = (ta, zg, hus, hur, ua, va, wap) 
    167 ChunckJob3D = 100Y 
     160ChunckJob3D = 10Y 
    168161Seasonal=OFF 
    169162 

  • CMIP5/piControl/piControlMR1/COMP/opa9.card

    r1148 r1167  
    4545 
    4646[OutputText] 
    47 List=   (ocean.output, oceanx.prt, solver.stat) 
     47List=   (ocean.output, solver.stat, namelist) 
    4848 
    4949[OutputFiles] 

  • CMIP5/piControl/piControlMR1/COMP/orchidee.card

    r1086 r1167  
    88[InitialStateFiles] 
    99List=   (${R_INIT}/SRF/${config_UserChoices_TagName}/soils_param.nc,      . ), \ 
    10         (${R_INIT}/SRF/${config_UserChoices_TagName}/routing.nc,          . ), \ 
    11         (${R_INIT}/SRF/${config_UserChoices_TagName}/PFTmap_IPCC_1850.nc, PFTmap.nc) 
     10        (${R_INIT}/SRF/${config_UserChoices_TagName}/routing.nc,          . ) 
    1211 
    1312[BoundaryFiles] 
    1413List=   () 
    15 ListNonDel= () 
     14ListNonDel= (${R_BC}/SRF/${config_UserChoices_TagName}/PFTmap_1850to2005_AR5_LUHa.rc2/PFTmap_IPCC_1850.nc, PFTmap.nc) 
    1615 
    1716[SmoothFiles] 
    … …  
    2625 
    2726[OutputText] 
    28 List=   (out_orchidee) 
     27List=   (out_orchidee, used_orchidee.def) 
    2928 
    3029[OutputFiles] 
    … …  
    4645GatherWithInternal= (lon, lat, veget, time_counter, time_counter_bnds, Areas, Contfrac) 
    4746TimeSeriesVars2D= (mrsos, mrro) 
    48 ChunckJob2D= 50Y 
     47ChunckJob2D= 10Y 
    4948TimeSeriesVars3D= (ptn) 
    5049ChunckJob3D= 10Y 

  • CMIP5/piControl/piControlMR1/COMP/pisces.card

    r1148 r1167  
    3333 
    3434[OutputText] 
    35 List=   () 
     35List=   (namelist_top, namelist_pisces) 
    3636 
    3737[OutputFiles] 

  • CMIP5/piControl/piControlMR1/README

    r1055 r1167  
    1 IPSLCM5A 
     1IPSLCM5A-MR 
    22 
    3 09/06/2010 
     3ie IPSLCM5A at Medium Resolution : 144x142 for LMDZ. 
     414/10/2010 
    45 
    56Experiment Name comes from CMIP5 DRS. See: http://cmip-pcmdi.llnl.gov/cmip5/docs/cmip5_data_reference_syntax.pdf 
    6 Output files are stored into : login/IGCM_OUT/IPSLCM5A/DEVT/pdControl/EXP00 directory 
     7Output files are stored into : login/IGCM_OUT/IPSLCM5A-MR/PROD/piControl/piControlMR1 directory 
     8 
     9Compilation : 
     10sxgmake ORCA2xLMD144142-L39 2>&1 | tee compile.out 
     11 
     12DateBegin : 18000101 
     13 
     14COSP Outputs : 
     15Monthly : all the simulation 
     16Daily : 1850-1869 and 1970-1989 
    717 
    818 

  • CMIP5/piControl/piControlMR1/config.card

    r1049 r1167  
    99[UserChoices] 
    1010#============================ 
    11 JobName=EXP00 
     11JobName=piControlMR1 
    1212#----- Short Name of Experiment 
    1313ExperimentName=piControl 
    1414#----- DEVT TEST PROD 
    15 SpaceName=DEVT 
    16 LongName="IPSLCM5A CMIP5 DEVT phase piControl example with large outputs" 
    17 TagName=IPSLCM5A 
     15SpaceName=PROD 
     16LongName="IPSLCM5A-MR CMIP5 PROD piControl, with 1850 PFT map, climoz_v2, Aerosols_v2 " 
     17TagName=IPSLCM5A-MR 
    1818#============================ 
    1919#-- leap, noleap, 360d 
    … …  
    2121#-- Experiment dates : Beginning and ending 
    2222#-- "YYYY-MM-DD" 
    23 DateBegin=1850-01-01 
    24 DateEnd=1850-12-31 
     23DateBegin=1800-01-01 
     24DateEnd=1819-12-31 
    2525#============================ 
    2626#-- 1Y, 1M, 5D, 1D Period Length of one trunk of simulation 
    … …  
    3333#-- Total Number of Processors (minimum is 2 for a coupled configuration) 
    3434#JobNumProcTot=2 
    35 JobNumProcTot=4 
     35JobNumProcTot=8 
    3636#============================ 
    3737#-- Run Options : here for oasis coupling 
    … …  
    5454#D- If you want to restart all components from the same simulation, 
    5555#D-      put OveRule flag to 'y' and set the next 3 parameters 
    56 OverRule=n 
     56OverRule=y 
    5757#D- Last day of the experience used as restart for all components 
    58 RestartDate=1899-12-31 
     58RestartDate=1850-12-31 
    5959#D- Define restart simulation name for all components 
    60 RestartJobName=EXP00 
     60RestartJobName=piControlMR0 
    6161#D- Path Server Group Login 
    62 RestartPath=${ARCHIVE}/IGCM_OUT/IPSLCM5A/DEVT/piControl 
     62RestartPath=${ARCHIVE}/IGCM_OUT/IPSLCM5A-MR/DEVT/piControl 
    6363 
    6464#======================================================================== 
    … …  
    191191#D- Do we rebuild parallel output, this flag determines 
    192192#D- frequency of rebuild submission (use NONE for DRYRUN=3) 
    193 RebuildFrequency=5Y 
     193RebuildFrequency=2Y 
    194194#D- Do we rebuild parallel output from archive (use NONE to use SCRATCHDIR as buffer) 
    195 RebuildFromArchive=true 
     195RebuildFromArchive=NONE 
    196196#D- If you want to produce time series, this flag determines 
    197197#D- frequency of post-processing submission (NONE if you don't want) 
Note: See TracChangeset for help on using the changeset viewer.