Changeset 1787 for CONFIG/UNIFORM/v5


Ignore:
Timestamp:
06/25/12 19:08:33 (12 years ago)
Author:
jgipsl
Message:
  • Updated LMDZRERP experiment to use config.def and output.def files
  • Better comments in lmdz.card (I hope)
  • Removed LMDZ_Freq_aero and LMDZ_Length_aero from lmdz.card. Option not longer existing in lmdz.driver
Location:
CONFIG/UNIFORM/v5
Files:
21 edited

Legend:

Unmodified
Added
Removed

  • CONFIG/UNIFORM/v5/IPSLCM5CHS_v5/EXPERIMENTS/IPSLCM5/Chistorical/COMP/lmdz.card

    r1750 r1787  
    1313ConfType=annuel 
    1414 
     15# ByPass_hgardfou_teta=y : modify teta_ parameters for following CumulPeriod only 
    1516ByPass_hgardfou_teta=n 
     17 
     18# ByPass_hgardfou_mats=y : set parameter purmats=y for following CumulPeriod only 
    1619ByPass_hgardfou_mats=n 
     20 
     21# Number of periods where to set parameter adjust=y before switching to adjust=n 
     22# For adjust=n, set LMDZ_NbPeriod_ajust=0.  
    1723LMDZ_NbPeriod_adjust=3 
    18 # LMDZ_NbPeriod_adjust=0 
    19 # To force usage of this Bands file, put LMDZ_NbPeriod_adjust=0 and replace XXXXXXX by Restart experiment 
     24# To force usage of specific Bands file, set LMDZ_NbPeriod_adjust=0 and replace XXXXXXX by Restart experiment 
    2025# LMDZ_Bands_file_name=${ARCHIVE}/IGCM_OUT/IPSLCM5A/DEVT/pdControl/XXXXXX/ATM/Debug/pdControl_XXXXXXX_Bands_96x95x19_3prc.dat_3 
    2126 
    … …  
    2328# OutLevel=low/medium/high 
    2429OutLevel=high 
    25  
    26 # To force higher writing level for aerosol.  
    27 # LMDZ_Freq_aero : frequency for writing (in PeriodLength : 10Years = 120) ,  
    28 # LMDZ_Length_aero : length of writing (in PeriodLength : 1Year = 12).  
    29 # To cancel this option put LMDZ_Length_aero=0 
    30 LMDZ_Freq_aero=120 
    31 LMDZ_Length_aero=12 
    3230 
    3331# Set COSP activation and Outputs frequency (monthly, daily, HF) = y/n 

  • CONFIG/UNIFORM/v5/IPSLCM5CHS_v5/EXPERIMENTS/IPSLCM5/CpiControl/COMP/lmdz.card

    r1750 r1787  
    1313ConfType=preind 
    1414 
     15# ByPass_hgardfou_teta=y : modify teta_ parameters for following CumulPeriod only 
    1516ByPass_hgardfou_teta=n 
     17 
     18# ByPass_hgardfou_mats=y : set parameter purmats=y for following CumulPeriod only 
    1619ByPass_hgardfou_mats=n 
     20 
     21# Number of periods where to set parameter adjust=y before switching to adjust=n 
     22# For adjust=n, set LMDZ_NbPeriod_ajust=0.  
    1723LMDZ_NbPeriod_adjust=3 
    18 # LMDZ_NbPeriod_adjust=0 
    19 # To force usage of this Bands file, put LMDZ_NbPeriod_adjust=0 and replace XXXXXXX by Restart experiment 
     24 
     25# To force usage of specific Bands file, set LMDZ_NbPeriod_adjust=0 and replace XXXXXXX by Restart experiment 
    2026# LMDZ_Bands_file_name=${ARCHIVE}/IGCM_OUT/IPSLCM5A/DEVT/pdControl/XXXXXX/ATM/Debug/pdControl_XXXXXXX_Bands_96x95x19_3prc.dat_3 
    2127 
    … …  
    2329# OutLevel=low/medium/high 
    2430OutLevel=medium 
    25  
    26 # To force higher writing level for aerosol.  
    27 # LMDZ_Freq_aero : frequency for writing (in PeriodLength : 10Years = 120) ,  
    28 # LMDZ_Length_aero : length of writing (in PeriodLength : 1Year = 12).  
    29 # To cancel this option put LMDZ_Length_aero=0 
    30 LMDZ_Freq_aero=120 
    31 LMDZ_Length_aero=12 
    3231 
    3332# Set COSP activation and Outputs frequency (monthly, daily, HF) = y/n 

  • CONFIG/UNIFORM/v5/IPSLCM5CHS_v5/EXPERIMENTS/IPSLCM5/EXP00/COMP/lmdz.card

    r1750 r1787  
    1313ConfType=actuel 
    1414 
     15# ByPass_hgardfou_teta=y : modify teta_ parameters for following CumulPeriod only 
    1516ByPass_hgardfou_teta=n 
     17 
     18# ByPass_hgardfou_mats=y : set parameter purmats=y for following CumulPeriod only 
    1619ByPass_hgardfou_mats=n 
     20 
     21# Number of periods where to set parameter adjust=y before switching to adjust=n 
     22# For adjust=n, set LMDZ_NbPeriod_ajust=0.  
    1723LMDZ_NbPeriod_adjust=3 
    18 # LMDZ_NbPeriod_adjust=0 
    19 # To force usage of this Bands file, put LMDZ_NbPeriod_adjust=0 and replace XXXXXXX by Restart experiment 
     24 
     25# To force usage of specific Bands file, set LMDZ_NbPeriod_adjust=0 and replace XXXXXXX by Restart experiment 
    2026# LMDZ_Bands_file_name=${ARCHIVE}/IGCM_OUT/IPSLCM5A/DEVT/pdControl/XXXXXX/ATM/Debug/pdControl_XXXXXXX_Bands_96x95x19_3prc.dat_3 
    2127 
    … …  
    2329# OutLevel=low/medium/high 
    2430OutLevel=low 
    25  
    26 # To force higher writing level for aerosol.  
    27 # LMDZ_Freq_aero : frequency for writing (in PeriodLength : 10Years = 120) ,  
    28 # LMDZ_Length_aero : length of writing (in PeriodLength : 1Year = 12).  
    29 # To cancel this option put LMDZ_Length_aero=0 
    30 LMDZ_Freq_aero=120 
    31 LMDZ_Length_aero=12 
    3231 
    3332# Set COSP activation and Outputs frequency (monthly, daily, HF) = y/n 

  • CONFIG/UNIFORM/v5/IPSLCM5CHS_v5/EXPERIMENTS/IPSLCM5/historical/COMP/lmdz.card

    r1750 r1787  
    1313ConfType=annuel 
    1414 
     15# ByPass_hgardfou_teta=y : modify teta_ parameters for following CumulPeriod only 
    1516ByPass_hgardfou_teta=n 
     17 
     18# ByPass_hgardfou_mats=y : set parameter purmats=y for following CumulPeriod only 
    1619ByPass_hgardfou_mats=n 
     20 
     21# Number of periods where to set parameter adjust=y before switching to adjust=n 
     22# For adjust=n, set LMDZ_NbPeriod_ajust=0.  
    1723LMDZ_NbPeriod_adjust=3 
    18 # LMDZ_NbPeriod_adjust=0 
    19 # To force usage of this Bands file, put LMDZ_NbPeriod_adjust=0 and replace XXXXXXX by Restart experiment 
     24 
     25# To force usage of specific Bands file, set LMDZ_NbPeriod_adjust=0 and replace XXXXXXX by Restart experiment 
    2026# LMDZ_Bands_file_name=${ARCHIVE}/IGCM_OUT/IPSLCM5A/DEVT/pdControl/XXXXXX/ATM/Debug/pdControl_XXXXXXX_Bands_96x95x19_3prc.dat_3 
    2127 
    … …  
    2329# OutLevel=low/medium/high 
    2430OutLevel=high 
    25  
    26 # To force higher writing level for aerosol.  
    27 # LMDZ_Freq_aero : frequency for writing (in PeriodLength : 10Years = 120) ,  
    28 # LMDZ_Length_aero : length of writing (in PeriodLength : 1Year = 12).  
    29 # To cancel this option put LMDZ_Length_aero=0 
    30 LMDZ_Freq_aero=120 
    31 LMDZ_Length_aero=12 
    3231 
    3332# Set COSP activation and Outputs frequency (monthly, daily, HF) = y/n 

  • CONFIG/UNIFORM/v5/IPSLCM5CHS_v5/EXPERIMENTS/IPSLCM5/piControl/COMP/lmdz.card

    r1750 r1787  
    1313ConfType=preind 
    1414 
     15# ByPass_hgardfou_teta=y : modify teta_ parameters for following CumulPeriod only 
    1516ByPass_hgardfou_teta=n 
     17 
     18# ByPass_hgardfou_mats=y : set parameter purmats=y for following CumulPeriod only 
    1619ByPass_hgardfou_mats=n 
     20 
     21# Number of periods where to set parameter adjust=y before switching to adjust=n 
     22# For adjust=n, set LMDZ_NbPeriod_ajust=0.  
    1723LMDZ_NbPeriod_adjust=3 
    18 # LMDZ_NbPeriod_adjust=0 
    19 # To force usage of this Bands file, put LMDZ_NbPeriod_adjust=0 and replace XXXXXXX by Restart experiment 
     24 
     25# To force usage of specific Bands file, set LMDZ_NbPeriod_adjust=0 and replace XXXXXXX by Restart experiment 
    2026# LMDZ_Bands_file_name=${ARCHIVE}/IGCM_OUT/IPSLCM5A/DEVT/pdControl/XXXXXX/ATM/Debug/pdControl_XXXXXXX_Bands_96x95x19_3prc.dat_3 
    2127 
    … …  
    2329# OutLevel=low/medium/high 
    2430OutLevel=medium 
    25  
    26 # To force higher writing level for aerosol.  
    27 # LMDZ_Freq_aero : frequency for writing (in PeriodLength : 10Years = 120) ,  
    28 # LMDZ_Length_aero : length of writing (in PeriodLength : 1Year = 12).  
    29 # To cancel this option put LMDZ_Length_aero=0 
    30 LMDZ_Freq_aero=120 
    31 LMDZ_Length_aero=12 
    3231 
    3332# Set COSP activation and Outputs frequency (monthly, daily, HF) = y/n 

  • CONFIG/UNIFORM/v5/IPSLCM5CHS_v5/EXPERIMENTS/IPSLCM5CHS/ref1/COMP/lmdz.card

    r1750 r1787  
    1313ConfType=preind 
    1414 
     15# ByPass_hgardfou_teta=y : modify teta_ parameters for following CumulPeriod only 
    1516ByPass_hgardfou_teta=n 
     17 
     18# ByPass_hgardfou_mats=y : set parameter purmats=y for following CumulPeriod only 
    1619ByPass_hgardfou_mats=n 
     20 
     21# Number of periods where to set parameter adjust=y before switching to adjust=n 
     22# For adjust=n, set LMDZ_NbPeriod_ajust=0.  
    1723LMDZ_NbPeriod_adjust=3 
    18 # LMDZ_NbPeriod_adjust=0 
    19 # To force usage of this Bands file, put LMDZ_NbPeriod_adjust=0 and replace XXXXXXX by Restart experiment 
     24 
     25# To force usage of specific Bands file, set LMDZ_NbPeriod_adjust=0 and replace XXXXXXX by Restart experiment 
    2026# LMDZ_Bands_file_name=${ARCHIVE}/IGCM_OUT/IPSLCM5A/DEVT/pdControl/XXXXXX/ATM/Debug/pdControl_XXXXXXX_Bands_96x95x19_3prc.dat_3 
    2127 

  • CONFIG/UNIFORM/v5/IPSLCM5CHS_v5/EXPERIMENTS/LMDZOR/amip/COMP/lmdz.card

    r1750 r1787  
    1111#LMDZ_Physics=NPv3.1 
    1212 
    13 # You can choose here the name of create_etat0 you want to use 
    14 # If noting is defined here, the job will get the JobName in the file  ../CREATE/config.card 
     13# Set the variable CREATE needed further below to find the initial and boundary condition files. 
    1514CREATE=ELI-${RESOL_ATM_3D} 
     15 
     16# ByPass_hgardfou_teta=y : modify teta_ parameters for following CumulPeriod only 
    1617ByPass_hgardfou_teta=n 
     18 
     19# ByPass_hgardfou_mats=y : set parameter purmats=y for following CumulPeriod only 
    1720ByPass_hgardfou_mats=n 
     21 
     22# Number of periods where to set parameter adjust=y before switching to adjust=n 
     23# For adjust=n, set LMDZ_NbPeriod_ajust=0.  
    1824LMDZ_NbPeriod_adjust=3 
    19 # LMDZ_NbPeriod_adjust=0 
    20 # To force usage of this Bands file, put LMDZ_NbPeriod_adjust=0 and replace XXXXXXX by Restart Job Name 
     25 
     26# To force usage of specific Bands file, put LMDZ_NbPeriod_adjust=0 and replace XXXXXXX by Restart Job Name 
    2127# LMDZ_Bands_file_name=${ARCHIVE}/IGCM_OUT/IPSLCM5/XXXXXXX/ATM/Debug/XXXXXXX_Bands_96x95x19_3prc.dat_3 
    2228 
    … …  
    4248 
    4349# Nugding : ok_guide=y/n 
     50# If ok_guide=y, add nudging files(u.nc, v.nc, hur.nc,...) in BoundaryFiles section below. 
    4451ok_guide=n 
    4552 

  • CONFIG/UNIFORM/v5/IPSLCM5CHS_v5/EXPERIMENTS/LMDZOR/clim/COMP/lmdz.card

    r1750 r1787  
    99# NPv3.1 for new physics, to be used with LMDZ5/trunk revision 1554 or later 
    1010LMDZ_Physics=AP 
    11 #LMDZ_Physics=NPv3.1 
    12  
    13 # You can choose here the name of create_etat0 you want to use 
    14 # If noting is defined here, the job will get the JobName in the file  ../CREATE/config.card 
     11 
     12# Set the variable CREATE needed further below to find the initial and boundary condition files. 
    1513CREATE=ELC-${RESOL_ATM_3D} 
     14 
     15# ByPass_hgardfou_teta=y : modify teta_ parameters for following CumulPeriod only 
    1616ByPass_hgardfou_teta=n 
     17 
     18# ByPass_hgardfou_mats=y : set parameter purmats=y for following CumulPeriod only 
    1719ByPass_hgardfou_mats=n 
     20 
     21# Number of periods where to set parameter adjust=y before switching to adjust=n 
     22# For adjust=n, set LMDZ_NbPeriod_ajust=0.  
    1823LMDZ_NbPeriod_adjust=3 
    19 # LMDZ_NbPeriod_adjust=0 
    20 # To force usage of this Bands file, put LMDZ_NbPeriod_adjust=0 and replace XXXXXXX by Restart Job Name 
     24 
     25# To force usage of specific Bands file, set LMDZ_NbPeriod_adjust=0 and replace XXXXXXX by Restart Job Name 
    2126# LMDZ_Bands_file_name=${ARCHIVE}/IGCM_OUT/IPSLCM5/XXXXXXX/ATM/Debug/XXXXXXX_Bands_96x95x19_3prc.dat_3 
    2227 
    … …  
    4247 
    4348# Nugding : ok_guide=y/n 
     49# If ok_guide=y, add nudging files(u.nc, v.nc, hur.nc,...) in BoundaryFiles section below. 
    4450ok_guide=n 
     51 
    4552 
    4653[InitialStateFiles] 

  • CONFIG/UNIFORM/v5/IPSLCM5CHS_v5/EXPERIMENTS/LMDZREPR/ref1/COMP/lmdz.card

    r1750 r1787  
    99# NPv3.1 for new physics, to be used with LMDZ5/trunk revision 1554 or later 
    1010LMDZ_Physics=AP 
    11 #LMDZ_Physics=NPv3.1 
    12  
    13 # You can choose here the name of create_etat0 you want to use 
    14 # If noting is defined here, the job will get the JobName in the file  ../CREATE/config.card 
     11 
     12# Set the variable CREATE needed further below to find the initial and boundary condition files. 
    1513CREATE=ELI-${RESOL_ATM_3D} 
     14 
     15# ByPass_hgardfou_teta=y : modify teta_ parameters for following CumulPeriod only 
    1616ByPass_hgardfou_teta=n 
     17 
     18# ByPass_hgardfou_mats=y : set parameter purmats=y for following CumulPeriod only 
    1719ByPass_hgardfou_mats=n 
     20 
     21# Number of periods where to set parameter adjust=y before switching to adjust=n 
     22# For adjust=n, set LMDZ_NbPeriod_ajust=0.  
    1823LMDZ_NbPeriod_adjust=3 
    19 # LMDZ_NbPeriod_adjust=0 
    20 # To force usage of this Bands file, put LMDZ_NbPeriod_adjust=0 and replace XXXXXXX by Restart Job Name 
     24 
     25# To force usage of specific Bands file, set LMDZ_NbPeriod_adjust=0 and replace XXXXXXX by Restart Job Name 
    2126# LMDZ_Bands_file_name=${ARCHIVE}/IGCM_OUT/IPSLCM5/XXXXXXX/ATM/Debug/XXXXXXX_Bands_96x95x19_3prc.dat_3 
     27 
     28# Set ConfType to choose parameters for aerosols, solar and green house gazes.  
     29# The parameter file PARAM/config.def_$ConfType will be used. 
     30# ConfType=preind/actuel/annuel 
     31ConfType=annuel 
     32 
     33# Set OutLevel to choose the level of output files from LMDZ. The file PARAM/output.def_$OutLevel will be used. 
     34# OutLevel=low/medium/high 
     35OutLevel=low 
    2236 
    2337# Set COSP activation and Outputs frequency (monthly, daily, HF) = y/n 
    … …  
    3246LMDZ_NMC_hf=n 
    3347 
    34 # Other specific parameters to this experience  
    35 aer_type=annuel 
    36 pmagic=0.0 
    37  
    3848# Nugding : ok_guide=y/n 
     49# If ok_guide=y, add nudging files(u.nc, v.nc, hur.nc,...) in BoundaryFiles section below. 
    3950ok_guide=n 
    4051 
    … …  
    6172        (${SUBMIT_DIR}/PARAM/cosp_input_nl.txt,                .),    \ 
    6273        (${SUBMIT_DIR}/PARAM/cosp_output_nl.txt,               .),    \ 
     74        (${SUBMIT_DIR}/PARAM/output.def_${OutLevel},  output.def),    \ 
     75        (${SUBMIT_DIR}/PARAM/config.def_${ConfType},  config.def),    \ 
    6376        (${SUBMIT_DIR}/PARAM/guide.def, .), \ 
    6477        (${SUBMIT_DIR}/PARAM/run.def, .), \ 
    … …  
    7083 
    7184[OutputText] 
    72 List=   (physiq.def, gcm.def, run.def, traceur.def, guide.def, used_run.def) 
     85List=   (physiq.def, gcm.def, run.def, traceur.def, guide.def, config.def, output.def, used_run.def) 
    7386 
    7487[OutputFiles] 

  • CONFIG/UNIFORM/v5/IPSLCM5_v5/EXPERIMENTS/IPSLCM5/Chistorical/COMP/lmdz.card

    r1750 r1787  
    1313ConfType=annuel 
    1414 
     15# ByPass_hgardfou_teta=y : modify teta_ parameters for following CumulPeriod only 
    1516ByPass_hgardfou_teta=n 
     17 
     18# ByPass_hgardfou_mats=y : set parameter purmats=y for following CumulPeriod only 
    1619ByPass_hgardfou_mats=n 
     20 
     21# Number of periods where to set parameter adjust=y before switching to adjust=n 
     22# For adjust=n, set LMDZ_NbPeriod_ajust=0.  
    1723LMDZ_NbPeriod_adjust=3 
    18 # LMDZ_NbPeriod_adjust=0 
    19 # To force usage of this Bands file, put LMDZ_NbPeriod_adjust=0 and replace XXXXXXX by Restart experiment 
     24# To force usage of specific Bands file, set LMDZ_NbPeriod_adjust=0 and replace XXXXXXX by Restart experiment 
    2025# LMDZ_Bands_file_name=${ARCHIVE}/IGCM_OUT/IPSLCM5A/DEVT/pdControl/XXXXXX/ATM/Debug/pdControl_XXXXXXX_Bands_96x95x19_3prc.dat_3 
    2126 
    … …  
    2328# OutLevel=low/medium/high 
    2429OutLevel=high 
    25  
    26 # To force higher writing level for aerosol.  
    27 # LMDZ_Freq_aero : frequency for writing (in PeriodLength : 10Years = 120) ,  
    28 # LMDZ_Length_aero : length of writing (in PeriodLength : 1Year = 12).  
    29 # To cancel this option put LMDZ_Length_aero=0 
    30 LMDZ_Freq_aero=120 
    31 LMDZ_Length_aero=12 
    3230 
    3331# Set COSP activation and Outputs frequency (monthly, daily, HF) = y/n 

  • CONFIG/UNIFORM/v5/IPSLCM5_v5/EXPERIMENTS/IPSLCM5/CpiControl/COMP/lmdz.card

    r1750 r1787  
    1313ConfType=preind 
    1414 
     15# ByPass_hgardfou_teta=y : modify teta_ parameters for following CumulPeriod only 
    1516ByPass_hgardfou_teta=n 
     17 
     18# ByPass_hgardfou_mats=y : set parameter purmats=y for following CumulPeriod only 
    1619ByPass_hgardfou_mats=n 
     20 
     21# Number of periods where to set parameter adjust=y before switching to adjust=n 
     22# For adjust=n, set LMDZ_NbPeriod_ajust=0.  
    1723LMDZ_NbPeriod_adjust=3 
    18 # LMDZ_NbPeriod_adjust=0 
    19 # To force usage of this Bands file, put LMDZ_NbPeriod_adjust=0 and replace XXXXXXX by Restart experiment 
     24 
     25# To force usage of specific Bands file, set LMDZ_NbPeriod_adjust=0 and replace XXXXXXX by Restart experiment 
    2026# LMDZ_Bands_file_name=${ARCHIVE}/IGCM_OUT/IPSLCM5A/DEVT/pdControl/XXXXXX/ATM/Debug/pdControl_XXXXXXX_Bands_96x95x19_3prc.dat_3 
    2127 
    … …  
    2329# OutLevel=low/medium/high 
    2430OutLevel=medium 
    25  
    26 # To force higher writing level for aerosol.  
    27 # LMDZ_Freq_aero : frequency for writing (in PeriodLength : 10Years = 120) ,  
    28 # LMDZ_Length_aero : length of writing (in PeriodLength : 1Year = 12).  
    29 # To cancel this option put LMDZ_Length_aero=0 
    30 LMDZ_Freq_aero=120 
    31 LMDZ_Length_aero=12 
    3231 
    3332# Set COSP activation and Outputs frequency (monthly, daily, HF) = y/n 

  • CONFIG/UNIFORM/v5/IPSLCM5_v5/EXPERIMENTS/IPSLCM5/EXP00/COMP/lmdz.card

    r1750 r1787  
    1313ConfType=actuel 
    1414 
     15# ByPass_hgardfou_teta=y : modify teta_ parameters for following CumulPeriod only 
    1516ByPass_hgardfou_teta=n 
     17 
     18# ByPass_hgardfou_mats=y : set parameter purmats=y for following CumulPeriod only 
    1619ByPass_hgardfou_mats=n 
     20 
     21# Number of periods where to set parameter adjust=y before switching to adjust=n 
     22# For adjust=n, set LMDZ_NbPeriod_ajust=0.  
    1723LMDZ_NbPeriod_adjust=3 
    18 # LMDZ_NbPeriod_adjust=0 
    19 # To force usage of this Bands file, put LMDZ_NbPeriod_adjust=0 and replace XXXXXXX by Restart experiment 
     24 
     25# To force usage of specific Bands file, set LMDZ_NbPeriod_adjust=0 and replace XXXXXXX by Restart experiment 
    2026# LMDZ_Bands_file_name=${ARCHIVE}/IGCM_OUT/IPSLCM5A/DEVT/pdControl/XXXXXX/ATM/Debug/pdControl_XXXXXXX_Bands_96x95x19_3prc.dat_3 
    2127 
    … …  
    2329# OutLevel=low/medium/high 
    2430OutLevel=low 
    25  
    26 # To force higher writing level for aerosol.  
    27 # LMDZ_Freq_aero : frequency for writing (in PeriodLength : 10Years = 120) ,  
    28 # LMDZ_Length_aero : length of writing (in PeriodLength : 1Year = 12).  
    29 # To cancel this option put LMDZ_Length_aero=0 
    30 LMDZ_Freq_aero=120 
    31 LMDZ_Length_aero=12 
    3231 
    3332# Set COSP activation and Outputs frequency (monthly, daily, HF) = y/n 

  • CONFIG/UNIFORM/v5/IPSLCM5_v5/EXPERIMENTS/IPSLCM5/historical/COMP/lmdz.card

    r1750 r1787  
    1313ConfType=annuel 
    1414 
     15# ByPass_hgardfou_teta=y : modify teta_ parameters for following CumulPeriod only 
    1516ByPass_hgardfou_teta=n 
     17 
     18# ByPass_hgardfou_mats=y : set parameter purmats=y for following CumulPeriod only 
    1619ByPass_hgardfou_mats=n 
     20 
     21# Number of periods where to set parameter adjust=y before switching to adjust=n 
     22# For adjust=n, set LMDZ_NbPeriod_ajust=0.  
    1723LMDZ_NbPeriod_adjust=3 
    18 # LMDZ_NbPeriod_adjust=0 
    19 # To force usage of this Bands file, put LMDZ_NbPeriod_adjust=0 and replace XXXXXXX by Restart experiment 
     24 
     25# To force usage of specific Bands file, set LMDZ_NbPeriod_adjust=0 and replace XXXXXXX by Restart experiment 
    2026# LMDZ_Bands_file_name=${ARCHIVE}/IGCM_OUT/IPSLCM5A/DEVT/pdControl/XXXXXX/ATM/Debug/pdControl_XXXXXXX_Bands_96x95x19_3prc.dat_3 
    2127 
    … …  
    2329# OutLevel=low/medium/high 
    2430OutLevel=high 
    25  
    26 # To force higher writing level for aerosol.  
    27 # LMDZ_Freq_aero : frequency for writing (in PeriodLength : 10Years = 120) ,  
    28 # LMDZ_Length_aero : length of writing (in PeriodLength : 1Year = 12).  
    29 # To cancel this option put LMDZ_Length_aero=0 
    30 LMDZ_Freq_aero=120 
    31 LMDZ_Length_aero=12 
    3231 
    3332# Set COSP activation and Outputs frequency (monthly, daily, HF) = y/n 

  • CONFIG/UNIFORM/v5/IPSLCM5_v5/EXPERIMENTS/IPSLCM5/piControl/COMP/lmdz.card

    r1750 r1787  
    1313ConfType=preind 
    1414 
     15# ByPass_hgardfou_teta=y : modify teta_ parameters for following CumulPeriod only 
    1516ByPass_hgardfou_teta=n 
     17 
     18# ByPass_hgardfou_mats=y : set parameter purmats=y for following CumulPeriod only 
    1619ByPass_hgardfou_mats=n 
     20 
     21# Number of periods where to set parameter adjust=y before switching to adjust=n 
     22# For adjust=n, set LMDZ_NbPeriod_ajust=0.  
    1723LMDZ_NbPeriod_adjust=3 
    18 # LMDZ_NbPeriod_adjust=0 
    19 # To force usage of this Bands file, put LMDZ_NbPeriod_adjust=0 and replace XXXXXXX by Restart experiment 
     24 
     25# To force usage of specific Bands file, set LMDZ_NbPeriod_adjust=0 and replace XXXXXXX by Restart experiment 
    2026# LMDZ_Bands_file_name=${ARCHIVE}/IGCM_OUT/IPSLCM5A/DEVT/pdControl/XXXXXX/ATM/Debug/pdControl_XXXXXXX_Bands_96x95x19_3prc.dat_3 
    2127 
    … …  
    2329# OutLevel=low/medium/high 
    2430OutLevel=medium 
    25  
    26 # To force higher writing level for aerosol.  
    27 # LMDZ_Freq_aero : frequency for writing (in PeriodLength : 10Years = 120) ,  
    28 # LMDZ_Length_aero : length of writing (in PeriodLength : 1Year = 12).  
    29 # To cancel this option put LMDZ_Length_aero=0 
    30 LMDZ_Freq_aero=120 
    31 LMDZ_Length_aero=12 
    3231 
    3332# Set COSP activation and Outputs frequency (monthly, daily, HF) = y/n 

  • CONFIG/UNIFORM/v5/IPSLCM5_v5/EXPERIMENTS/LMDZOR/amip/COMP/lmdz.card

    r1750 r1787  
    1111#LMDZ_Physics=NPv3.1 
    1212 
    13 # You can choose here the name of create_etat0 you want to use 
    14 # If noting is defined here, the job will get the JobName in the file  ../CREATE/config.card 
     13# Set the variable CREATE needed further below to find the initial and boundary condition files. 
    1514CREATE=ELI-${RESOL_ATM_3D} 
     15 
     16# ByPass_hgardfou_teta=y : modify teta_ parameters for following CumulPeriod only 
    1617ByPass_hgardfou_teta=n 
     18 
     19# ByPass_hgardfou_mats=y : set parameter purmats=y for following CumulPeriod only 
    1720ByPass_hgardfou_mats=n 
     21 
     22# Number of periods where to set parameter adjust=y before switching to adjust=n 
     23# For adjust=n, set LMDZ_NbPeriod_ajust=0.  
    1824LMDZ_NbPeriod_adjust=3 
    19 # LMDZ_NbPeriod_adjust=0 
    20 # To force usage of this Bands file, put LMDZ_NbPeriod_adjust=0 and replace XXXXXXX by Restart Job Name 
     25 
     26# To force usage of specific Bands file, put LMDZ_NbPeriod_adjust=0 and replace XXXXXXX by Restart Job Name 
    2127# LMDZ_Bands_file_name=${ARCHIVE}/IGCM_OUT/IPSLCM5/XXXXXXX/ATM/Debug/XXXXXXX_Bands_96x95x19_3prc.dat_3 
    2228 
    … …  
    4248 
    4349# Nugding : ok_guide=y/n 
     50# If ok_guide=y, add nudging files(u.nc, v.nc, hur.nc,...) in BoundaryFiles section below. 
    4451ok_guide=n 
    4552 

  • CONFIG/UNIFORM/v5/IPSLCM5_v5/EXPERIMENTS/LMDZOR/clim/COMP/lmdz.card

    r1750 r1787  
    99# NPv3.1 for new physics, to be used with LMDZ5/trunk revision 1554 or later 
    1010LMDZ_Physics=AP 
    11 #LMDZ_Physics=NPv3.1 
    12  
    13 # You can choose here the name of create_etat0 you want to use 
    14 # If noting is defined here, the job will get the JobName in the file  ../CREATE/config.card 
     11 
     12# Set the variable CREATE needed further below to find the initial and boundary condition files. 
    1513CREATE=ELC-${RESOL_ATM_3D} 
     14 
     15# ByPass_hgardfou_teta=y : modify teta_ parameters for following CumulPeriod only 
    1616ByPass_hgardfou_teta=n 
     17 
     18# ByPass_hgardfou_mats=y : set parameter purmats=y for following CumulPeriod only 
    1719ByPass_hgardfou_mats=n 
     20 
     21# Number of periods where to set parameter adjust=y before switching to adjust=n 
     22# For adjust=n, set LMDZ_NbPeriod_ajust=0.  
    1823LMDZ_NbPeriod_adjust=3 
    19 # LMDZ_NbPeriod_adjust=0 
    20 # To force usage of this Bands file, put LMDZ_NbPeriod_adjust=0 and replace XXXXXXX by Restart Job Name 
     24 
     25# To force usage of specific Bands file, set LMDZ_NbPeriod_adjust=0 and replace XXXXXXX by Restart Job Name 
    2126# LMDZ_Bands_file_name=${ARCHIVE}/IGCM_OUT/IPSLCM5/XXXXXXX/ATM/Debug/XXXXXXX_Bands_96x95x19_3prc.dat_3 
    2227 
    … …  
    4247 
    4348# Nugding : ok_guide=y/n 
     49# If ok_guide=y, add nudging files(u.nc, v.nc, hur.nc,...) in BoundaryFiles section below. 
    4450ok_guide=n 
     51 
    4552 
    4653[InitialStateFiles] 

  • CONFIG/UNIFORM/v5/LMDZORINCA_v5/EXPERIMENTS/LMDZOR/amip/COMP/lmdz.card

    r1750 r1787  
    1111#LMDZ_Physics=NPv3.1 
    1212 
    13 # You can choose here the name of create_etat0 you want to use 
    14 # If noting is defined here, the job will get the JobName in the file  ../CREATE/config.card 
     13# Set the variable CREATE needed further below to find the initial and boundary condition files. 
    1514CREATE=ELI-${RESOL_ATM_3D} 
     15 
     16# ByPass_hgardfou_teta=y : modify teta_ parameters for following CumulPeriod only 
    1617ByPass_hgardfou_teta=n 
     18 
     19# ByPass_hgardfou_mats=y : set parameter purmats=y for following CumulPeriod only 
    1720ByPass_hgardfou_mats=n 
     21 
     22# Number of periods where to set parameter adjust=y before switching to adjust=n 
     23# For adjust=n, set LMDZ_NbPeriod_ajust=0.  
    1824LMDZ_NbPeriod_adjust=3 
    19 # LMDZ_NbPeriod_adjust=0 
    20 # To force usage of this Bands file, put LMDZ_NbPeriod_adjust=0 and replace XXXXXXX by Restart Job Name 
     25 
     26# To force usage of specific Bands file, put LMDZ_NbPeriod_adjust=0 and replace XXXXXXX by Restart Job Name 
    2127# LMDZ_Bands_file_name=${ARCHIVE}/IGCM_OUT/IPSLCM5/XXXXXXX/ATM/Debug/XXXXXXX_Bands_96x95x19_3prc.dat_3 
    2228 
    … …  
    4248 
    4349# Nugding : ok_guide=y/n 
     50# If ok_guide=y, add nudging files(u.nc, v.nc, hur.nc,...) in BoundaryFiles section below. 
    4451ok_guide=n 
    4552 

  • CONFIG/UNIFORM/v5/LMDZORINCA_v5/EXPERIMENTS/LMDZOR/clim/COMP/lmdz.card

    r1750 r1787  
    99# NPv3.1 for new physics, to be used with LMDZ5/trunk revision 1554 or later 
    1010LMDZ_Physics=AP 
    11 #LMDZ_Physics=NPv3.1 
    12  
    13 # You can choose here the name of create_etat0 you want to use 
    14 # If noting is defined here, the job will get the JobName in the file  ../CREATE/config.card 
     11 
     12# Set the variable CREATE needed further below to find the initial and boundary condition files. 
    1513CREATE=ELC-${RESOL_ATM_3D} 
     14 
     15# ByPass_hgardfou_teta=y : modify teta_ parameters for following CumulPeriod only 
    1616ByPass_hgardfou_teta=n 
     17 
     18# ByPass_hgardfou_mats=y : set parameter purmats=y for following CumulPeriod only 
    1719ByPass_hgardfou_mats=n 
     20 
     21# Number of periods where to set parameter adjust=y before switching to adjust=n 
     22# For adjust=n, set LMDZ_NbPeriod_ajust=0.  
    1823LMDZ_NbPeriod_adjust=3 
    19 # LMDZ_NbPeriod_adjust=0 
    20 # To force usage of this Bands file, put LMDZ_NbPeriod_adjust=0 and replace XXXXXXX by Restart Job Name 
     24 
     25# To force usage of specific Bands file, set LMDZ_NbPeriod_adjust=0 and replace XXXXXXX by Restart Job Name 
    2126# LMDZ_Bands_file_name=${ARCHIVE}/IGCM_OUT/IPSLCM5/XXXXXXX/ATM/Debug/XXXXXXX_Bands_96x95x19_3prc.dat_3 
    2227 
    … …  
    4247 
    4348# Nugding : ok_guide=y/n 
     49# If ok_guide=y, add nudging files(u.nc, v.nc, hur.nc,...) in BoundaryFiles section below. 
    4450ok_guide=n 
     51 
    4552 
    4653[InitialStateFiles] 

  • CONFIG/UNIFORM/v5/LMDZOR_v5/EXPERIMENTS/LMDZOR/amip/COMP/lmdz.card

    r1750 r1787  
    1111#LMDZ_Physics=NPv3.1 
    1212 
    13 # You can choose here the name of create_etat0 you want to use 
    14 # If noting is defined here, the job will get the JobName in the file  ../CREATE/config.card 
     13# Set the variable CREATE needed further below to find the initial and boundary condition files. 
    1514CREATE=ELI-${RESOL_ATM_3D} 
     15 
     16# ByPass_hgardfou_teta=y : modify teta_ parameters for following CumulPeriod only 
    1617ByPass_hgardfou_teta=n 
     18 
     19# ByPass_hgardfou_mats=y : set parameter purmats=y for following CumulPeriod only 
    1720ByPass_hgardfou_mats=n 
     21 
     22# Number of periods where to set parameter adjust=y before switching to adjust=n 
     23# For adjust=n, set LMDZ_NbPeriod_ajust=0.  
    1824LMDZ_NbPeriod_adjust=3 
    19 # LMDZ_NbPeriod_adjust=0 
    20 # To force usage of this Bands file, put LMDZ_NbPeriod_adjust=0 and replace XXXXXXX by Restart Job Name 
     25 
     26# To force usage of specific Bands file, put LMDZ_NbPeriod_adjust=0 and replace XXXXXXX by Restart Job Name 
    2127# LMDZ_Bands_file_name=${ARCHIVE}/IGCM_OUT/IPSLCM5/XXXXXXX/ATM/Debug/XXXXXXX_Bands_96x95x19_3prc.dat_3 
    2228 
    … …  
    4248 
    4349# Nugding : ok_guide=y/n 
     50# If ok_guide=y, add nudging files(u.nc, v.nc, hur.nc,...) in BoundaryFiles section below. 
    4451ok_guide=n 
    4552 

  • CONFIG/UNIFORM/v5/LMDZOR_v5/EXPERIMENTS/LMDZOR/clim/COMP/lmdz.card

    r1750 r1787  
    99# NPv3.1 for new physics, to be used with LMDZ5/trunk revision 1554 or later 
    1010LMDZ_Physics=AP 
    11 #LMDZ_Physics=NPv3.1 
    12  
    13 # You can choose here the name of create_etat0 you want to use 
    14 # If noting is defined here, the job will get the JobName in the file  ../CREATE/config.card 
     11 
     12# Set the variable CREATE needed further below to find the initial and boundary condition files. 
    1513CREATE=ELC-${RESOL_ATM_3D} 
     14 
     15# ByPass_hgardfou_teta=y : modify teta_ parameters for following CumulPeriod only 
    1616ByPass_hgardfou_teta=n 
     17 
     18# ByPass_hgardfou_mats=y : set parameter purmats=y for following CumulPeriod only 
    1719ByPass_hgardfou_mats=n 
     20 
     21# Number of periods where to set parameter adjust=y before switching to adjust=n 
     22# For adjust=n, set LMDZ_NbPeriod_ajust=0.  
    1823LMDZ_NbPeriod_adjust=3 
    19 # LMDZ_NbPeriod_adjust=0 
    20 # To force usage of this Bands file, put LMDZ_NbPeriod_adjust=0 and replace XXXXXXX by Restart Job Name 
     24 
     25# To force usage of specific Bands file, set LMDZ_NbPeriod_adjust=0 and replace XXXXXXX by Restart Job Name 
    2126# LMDZ_Bands_file_name=${ARCHIVE}/IGCM_OUT/IPSLCM5/XXXXXXX/ATM/Debug/XXXXXXX_Bands_96x95x19_3prc.dat_3 
    2227 
    … …  
    4247 
    4348# Nugding : ok_guide=y/n 
     49# If ok_guide=y, add nudging files(u.nc, v.nc, hur.nc,...) in BoundaryFiles section below. 
    4450ok_guide=n 
     51 
    4552 
    4653[InitialStateFiles] 

  • CONFIG/UNIFORM/v5/LMDZREPR_v5/EXPERIMENTS/LMDZREPR/ref1/COMP/lmdz.card

    r1750 r1787  
    99# NPv3.1 for new physics, to be used with LMDZ5/trunk revision 1554 or later 
    1010LMDZ_Physics=AP 
    11 #LMDZ_Physics=NPv3.1 
    12  
    13 # You can choose here the name of create_etat0 you want to use 
    14 # If noting is defined here, the job will get the JobName in the file  ../CREATE/config.card 
     11 
     12# Set the variable CREATE needed further below to find the initial and boundary condition files. 
    1513CREATE=ELI-${RESOL_ATM_3D} 
     14 
     15# ByPass_hgardfou_teta=y : modify teta_ parameters for following CumulPeriod only 
    1616ByPass_hgardfou_teta=n 
     17 
     18# ByPass_hgardfou_mats=y : set parameter purmats=y for following CumulPeriod only 
    1719ByPass_hgardfou_mats=n 
     20 
     21# Number of periods where to set parameter adjust=y before switching to adjust=n 
     22# For adjust=n, set LMDZ_NbPeriod_ajust=0.  
    1823LMDZ_NbPeriod_adjust=3 
    19 # LMDZ_NbPeriod_adjust=0 
    20 # To force usage of this Bands file, put LMDZ_NbPeriod_adjust=0 and replace XXXXXXX by Restart Job Name 
     24 
     25# To force usage of specific Bands file, set LMDZ_NbPeriod_adjust=0 and replace XXXXXXX by Restart Job Name 
    2126# LMDZ_Bands_file_name=${ARCHIVE}/IGCM_OUT/IPSLCM5/XXXXXXX/ATM/Debug/XXXXXXX_Bands_96x95x19_3prc.dat_3 
     27 
     28# Set ConfType to choose parameters for aerosols, solar and green house gazes.  
     29# The parameter file PARAM/config.def_$ConfType will be used. 
     30# ConfType=preind/actuel/annuel 
     31ConfType=annuel 
     32 
     33# Set OutLevel to choose the level of output files from LMDZ. The file PARAM/output.def_$OutLevel will be used. 
     34# OutLevel=low/medium/high 
     35OutLevel=low 
    2236 
    2337# Set COSP activation and Outputs frequency (monthly, daily, HF) = y/n 
    … …  
    3246LMDZ_NMC_hf=n 
    3347 
    34 # Other specific parameters to this experience  
    35 aer_type=annuel 
    36 pmagic=0.0 
    37  
    3848# Nugding : ok_guide=y/n 
     49# If ok_guide=y, add nudging files(u.nc, v.nc, hur.nc,...) in BoundaryFiles section below. 
    3950ok_guide=n 
    4051 
    … …  
    6172        (${SUBMIT_DIR}/PARAM/cosp_input_nl.txt,                .),    \ 
    6273        (${SUBMIT_DIR}/PARAM/cosp_output_nl.txt,               .),    \ 
     74        (${SUBMIT_DIR}/PARAM/output.def_${OutLevel},  output.def),    \ 
     75        (${SUBMIT_DIR}/PARAM/config.def_${ConfType},  config.def),    \ 
    6376        (${SUBMIT_DIR}/PARAM/guide.def, .), \ 
    6477        (${SUBMIT_DIR}/PARAM/run.def, .), \ 
    … …  
    7083 
    7184[OutputText] 
    72 List=   (physiq.def, gcm.def, run.def, traceur.def, guide.def, used_run.def) 
     85List=   (physiq.def, gcm.def, run.def, traceur.def, guide.def, config.def, output.def, used_run.def) 
    7386 
    7487[OutputFiles] 
Note: See TracChangeset for help on using the changeset viewer.