Changeset 184 for CONFIG/trunk/LMDZINCA_v2/EXP_CH4

Timestamp:

10/19/07 15:38:59 (17 years ago)

Author:

acosce

Message:

ACo : take into account resolution for asking the compilation

ex : CH4xLMD9671 in place of CH4
change AA_make and all the card

Location:

CONFIG/trunk/LMDZINCA_v2/EXP_CH4

Files:

• COMP/inca.card (modified) (1 diff)
• COMP/inca.driver (modified) (3 diffs)
• COMP/lmdz.card (modified) (1 diff)
• COMP/lmdz.driver (modified) (2 diffs)
• config.card (modified) (2 diffs)

CONFIG/trunk/LMDZINCA_v2/EXP_CH4/COMP/inca.card

@@ -12 +12 @@
 
 ListNonDel= (${MODIPSL}/modeles/INCA3/SIMULATIONS/CH4/inca.dat , inca.dat       )\
-            (${R_INIT}/CHM/CH4/o3clim_96x72.nc               ,   o3clim.nc      )\
-            (${R_INIT}/CHM/CH4/mozart_96x72.nc               ,   mozart.nc      )\
-            (${R_INIT}/CHM/CH4/oxydants_96x72.nc             ,   oxydants.nc    )\
-            (${R_INIT}/CHM/CH4/npp_96x72.nc                  ,   npp.nc         )\
-            (${R_INIT}/CHM/CH4/aircraft_96x72.nc             ,   aircraft.nc    )\
-            (${R_INIT}/CHM/CH4/so4_96x72.nc                  ,   so4.nc         )\
-            (${R_INIT}/CHM/CH4/obs_input.dat                 ,   obs_input.dat  )\
-            (${R_INIT}/CHM/CH4/phototable.dat_V4.2           ,   phototable.dat )\
-            (${R_INIT}/CHM/CH4/landuse_96x72.nc              ,   landuse.nc     )\
-            (${R_INIT}/CHM/CH4/sflx_96x72_Present.nc         ,   sflx.nc        ) 
+            (${R_INIT}/CHM/LMDZINCA/CH4/INCA${RESOL_CHM}/o3clim.nc               ,   o3clim.nc      )\
+            (${R_INIT}/CHM/LMDZINCA/CH4/INCA${RESOL_CHM}/mozart.nc               ,   mozart.nc  )\
+            (${R_INIT}/CHM/LMDZINCA/CH4/INCA${RESOL_CHM}/oxydants.nc             ,   oxydants.nc    )\
+            (${R_INIT}/CHM/LMDZINCA/CH4/INCA${RESOL_CHM}/npp.nc              ,   npp.nc         )\
+            (${R_INIT}/CHM/LMDZINCA/CH4/INCA${RESOL_CHM}/aircraft.nc             ,   aircraft.nc    )\
+            (${R_INIT}/CHM/LMDZINCA/CH4/INCA${RESOL_CHM}/so4.nc              ,   so4.nc         )\
+            (${R_INIT}/CHM/LMDZINCA/CH4/obs_input.dat                ,   obs_input.dat  )\
+            (${R_INIT}/CHM/LMDZINCA/CH4/phototable.dat_V4.2          ,   phototable.dat )\
+            (${R_INIT}/CHM/LMDZINCA/CH4/INCA${RESOL_CHM}/landuse.nc              ,   landuse.nc     )\
+            (${R_INIT}/CHM/LMDZINCA/CH4/INCA${RESOL_CHM}/sflx_Present.nc         ,   sflx.nc        ) 
 
 [ParametersFiles]

CONFIG/trunk/LMDZINCA_v2/EXP_CH4/COMP/inca.driver

@@ -1 @@
-# $Id: inca.driver 73 2007-06-21 14:42:36Z acosce $
+#- $Id: inca.driver 119 2007-07-31 13:56:33Z acosce $
 #!/bin/ksh
 
@@ -9 +9 @@
     IGCM_debug_PushStack "CHM_Initialize"
 
+    RESOL_CHM=$( echo $RESOL_ATM | awk "-FD" '{print $2}' )
+    echo 'resol chimie', $RESOL_CHM
     echo "INCA Tag : LMDZ-INCA" ${config_UserChoices_TagName}
 
@@ -27 +29 @@
 
     echo FINALIZE CHM !!!
-
+#
 #    IGCM_sys_Mkdir ${R_OUT_EXE}
 #    cd ${MODIPSL}

CONFIG/trunk/LMDZINCA_v2/EXP_CH4/COMP/lmdz.card

@@ -7 +7 @@
 [InitialStateFiles]
 # start and startphy are the clim files computed with CLIM_CREATE (create_etat0_limit) job
-List=   (${R_INIT}/ATM/RESTART/${config_UserChoices_TagName}/start.nc, start.nc) \
-        (${R_INIT}/ATM/RESTART/${config_UserChoices_TagName}/startphy.nc, startphy.nc)
+List=   (${R_INIT}/CHM/${config_UserChoices_TagName}/INCA${RESOL_CHM}/start.nc, start.nc) \
+        (${R_INIT}/CHM/${config_UserChoices_TagName}/INCA${RESOL_CHM}/startphy.nc, startphy.nc)
 
 [BoundaryFiles]
 List=   () 
 # The first one is the clim limit.nc computed with CLIM_CREATE job
-ListNonDel= (${R_BC}/ATM/limit.nc, limit.nc)
+ListNonDel= (${R_BC}/CHM/LMDZINCA/LMD9672/limit.nc, limit.nc)
 
 [ParametersFiles]

CONFIG/trunk/LMDZINCA_v2/EXP_CH4/COMP/lmdz.driver

@@ -1 @@
-# $Id: lmdz.driver 73 2007-06-21 14:42:36Z acosce $
+#- $Id: lmdz.driver 119 2007-07-31 13:56:33Z acosce $
 #!/bin/ksh
 
@@ -10 +10 @@
     IGCM_debug_PushStack "ATM_Initialize"
 
-    RESOL_ATM=${RESOL}
+    RESOL_ATM=$( echo $RESOL | awk "-Fx" '{print $2}' )
+
 
     ##--Frequency purpose ....

CONFIG/trunk/LMDZINCA_v2/EXP_CH4/config.card

@@ -11 +11 @@
 JobName=CH4_AC00
 LongName='LMDz4INCA with New scripts'
-TagName=CH4
+TagName=LMDZINCA/CH4
 #============================
 #D-- leap, noleap, 360d
@@ -34 +34 @@
 JobRunOptions='"-np "${config_UserChoices_JobNumProcTot}'
 #============================
-R_INIT=/dmnfs/p86cozic/IGCM/INIT
-R_BC=/dmnfs/p86cozic/IGCM/BC
+R_INIT=/dmnfs/p86cozic/IGCM_NEW/INIT
+R_BC=/dmnfs/p86cozic/IGCM_NEW/BC
 
 #========================================================================