Ignore:
Timestamp:
02/25/16 16:20:34 (8 years ago)
Author:
jgipsl
Message:

Update with modifications done on LMDZOR_v6:

  • pmagic changed to 0.0 in config.def_preind
  • clean amoung old physics
  • clean in drivers to remove everything related to IOIPSL
  • removed old parameters not longer supported by the new model source versions
  • general cleaning
Location:
CONFIG/UNIFORM/v6/IPSLCM6/EXPERIMENTS/LMDZOR/clim/COMP
Files:
3 edited

Legend:

Unmodified
Added
Removed

  • CONFIG/UNIFORM/v6/IPSLCM6/EXPERIMENTS/LMDZOR/clim/COMP/lmdz.card

    r2586 r2758  
    77# LMDZ_Physics=NPv3.2 for new physics, to be used with LMDZ5/trunk revision 1554 or later 
    88LMDZ_Physics=AP 
    9 #LMDZ_Physics=NPv4.12 
    109 
    1110# Use XIOS as output library 
    … …  
    2019ConfType=actuel 
    2120 
    22 # manage radiative aerosol effect and ozone 
     21# Manage radiative aerosol effect and ozone 
    2322flag_aerosol=6 
    2423ok_ade=y 
    … …  
    4140# LMDZ_Bands_file_name=${ARCHIVE}/IGCM_OUT/IPSLCM5A/DEVT/pdControl/XXXXXX/ATM/Debug/pdControl_XXXXXXX_Bands_96x95x19_3prc.dat_3 
    4241 
    43 # Set OutLevel to choose the level of output files from LMDZ. The file PARAM/output.def_$OutLevel will be used. 
     42# Set OutLevel to choose the level of output for LMDZ.  
    4443# OutLevel=low/medium/high 
    4544OutLevel=low 
    4645 
    47 # Set COSP activation and Outputs frequency (monthly, daily, HF) = y/n 
     46# COSP activation and choose of output frequency for COSP (monthly, daily, HF) = y/n 
    4847LMDZ_COSP_OK=n 
    4948LMDZ_COSP_monthly=n 
    … …  
    5150LMDZ_COSP_hf=n 
    5251 
    53 # Set NMC Outputs frequency (monthly, daily, HF) = y/n 
     52# Set NMC output frequency (monthly, daily, HF) = y/n 
    5453LMDZ_NMC_monthly=y 
    5554LMDZ_NMC_daily=n 
    … …  
    6665[BoundaryFiles] 
    6766List=() 
    68  
    69 # With AR5 aerosols (including ASSO4M(=SO4), CSSO4M, AIBCM, ASBCM, AIPOMM, ASPOMM, ASSSM, CSSSM, SSSSM, CIDUSTM) 
    70 # With AR5 ozone(tropo + strato from LMDZOR-INCA-REPROBUS simulations) 
    7167ListNonDel= (${ARCHIVE}/IGCM_OUT/LMDZ/${CREATE}/ATM/Output/Boundary/${CREATE}_clim_limit.nc, limit.nc),\ 
    7268            (${ARCHIVE}/IGCM_OUT/LMDZ/${CREATE}/ATM/Output/Boundary/${CREATE}_climoz_LMDZ.nc, climoz_LMDZ.nc),\ 
    … …  
    7874 
    7975[ParametersFiles] 
    80 List=   (${SUBMIT_DIR}/PARAM/physiq.def_L${RESOL_ATM_Z}_${LMDZ_Physics}, physiq.def), \ 
    81         (${SUBMIT_DIR}/PARAM/gcm.def_${RESOL_ATM_3D},    gcm.def),          \ 
     76List=   (${SUBMIT_DIR}/PARAM/physiq.def_${LMDZ_Physics}, physiq.def),       \ 
     77        (${SUBMIT_DIR}/PARAM/gcm.def_${RESOL_ATM_XY},    gcm.def),          \ 
     78        (${SUBMIT_DIR}/PARAM/vert.def_L${RESOL_ATM_Z},   vert.def),         \ 
    8279        (${SUBMIT_DIR}/PARAM/cosp_input_nl.txt,                .),          \ 
    8380        (${SUBMIT_DIR}/PARAM/cosp_output_nl.txt,               .),          \ 
    … …  
    8784        (${SUBMIT_DIR}/PARAM/traceur.def, .),                               \ 
    8885        (${SUBMIT_DIR}/PARAM/iodef.xml, . ),                                \ 
     86        (${SUBMIT_DIR}/PARAM/file_def_histmth_lmdz.xml, . ),                \ 
     87        (${SUBMIT_DIR}/PARAM/file_def_histmthCOSP_lmdz.xml, .),             \ 
     88        (${SUBMIT_DIR}/PARAM/file_def_histmthNMC_lmdz.xml, . ),             \ 
     89        (${SUBMIT_DIR}/PARAM/file_def_histday_lmdz.xml, . ),                \ 
     90        (${SUBMIT_DIR}/PARAM/file_def_histdayCOSP_lmdz.xml, .),             \ 
     91        (${SUBMIT_DIR}/PARAM/file_def_histdayNMC_lmdz.xml, . ),             \ 
     92        (${SUBMIT_DIR}/PARAM/file_def_histhf_lmdz.xml, . ),                 \ 
     93        (${SUBMIT_DIR}/PARAM/file_def_histhfCOSP_lmdz.xml, .),              \ 
     94        (${SUBMIT_DIR}/PARAM/file_def_histhfNMC_lmdz.xml, . ),              \ 
     95        (${SUBMIT_DIR}/PARAM/file_def_histstn_lmdz.xml, . ),                \ 
     96        (${SUBMIT_DIR}/PARAM/file_def_histins_lmdz.xml, . ),                \ 
     97        (${SUBMIT_DIR}/PARAM/file_def_histLES_lmdz.xml, . ),                \ 
    8998        (${MODIPSL}/modeles/LMDZ/DefLists/context_lmdz.xml, . ),            \ 
    90         (${MODIPSL}/modeles/LMDZ/DefLists/field_def_lmdz.xml, . ),          \ 
    91         (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histmth_lmdz.xml, . ),   \ 
    92         (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histmthCOSP_lmdz.xml, .),\ 
    93         (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histmthNMC_lmdz.xml, . ),\ 
    94         (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histday_lmdz.xml, . ),   \ 
    95         (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histdayCOSP_lmdz.xml, .),\ 
    96         (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histdayNMC_lmdz.xml, . ),\ 
    97         (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histhf_lmdz.xml, . ),    \ 
    98         (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histhfCOSP_lmdz.xml, .), \ 
    99         (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histhfNMC_lmdz.xml, . ), \ 
    100         (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histstn_lmdz.xml, . ),   \ 
    101         (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histins_lmdz.xml, . ),   \ 
    102         (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histLES_lmdz.xml, . ) 
     99        (${MODIPSL}/modeles/LMDZ/DefLists/field_def_lmdz.xml, . ) 
    103100 
    104101[RestartFiles] 
    … …  
    107104 
    108105[OutputText] 
    109 List=   (physiq.def, gcm.def, run.def, traceur.def, guide.def, config.def, used_run.def, iodef.xml, context_lmdz.xml,field_def_lmdz.xml,debug.01,lmdz.prt) 
     106List=   (physiq.def, gcm.def, run.def, traceur.def, guide.def, config.def, used_run.def, iodef.xml, context_lmdz.xml, field_def_lmdz.xml, file_def_*lmdz.xml, debug.01, lmdz.prt) 
    110107 
    111108[OutputFiles] 
    … …  
    127124GatherWithInternal = (lon, lat, presnivs, time_counter, time_counter_bounds, aire) 
    128125TimeSeriesVars2D = (bils, cldh, cldl, cldm, cldq, cldt, evap, flat, ftime_con, iwp, lwp, LWdnSFC, LWdnSFCclr, LWupSFCclr, LWdn200, LWdn200clr, LWup200, LWup200clr, precip, prw, pluc, psol, q2m, rh2m, sens, sicf, slp, snow, soll0, soll, sols0, sols, SWdnSFC, SWupSFC, SWup200, SWdnTOA, SWupTOA, SWdn200, SWdnSFCclr, SWupSFCclr, SWupTOAclr, t2m, t2m_max, t2m_min, taux, taux_ter, taux_sic, taux_lic, taux_oce, tauy, tauy_ter, tauy_sic, tauy_lic, tauy_oce, lat_ter, lat_sic, lat_lic, lat_oce, nettop, pbase, ptop, topl0, topl, tops0, tops, topswad, topswai, tsol, tsol_ter, tsol_lic, tsol_oce, tsol_sic , u10m, u500, v10m, v500, w500, pourc_ter, pourc_oce, pourc_sic, pourc_lic, wind10m, od550aer, od550lt1aer, absvisaer, loadoa, loadbc, loadso4, loaddust, loadss, sconcoa, sconcbc, sconcso4, sconcdust, sconcss, reffclwtop, cldncl, swtoaas_ant, swtoacs_ant, swtoacf_ant, swsrfas_ant, swsrfcs_ant, swsrfcf_ant, swtoaas_nat, swtoacs_nat, swtoacf_nat, swsrfas_nat, swsrfcs_nat, swsrfcf_nat, solswai, solswad, swtoacf_zero, swsrfcf_zero) 
    129 ChunckJob2D = NONE 
     126ChunckJob2D = 100Y  
    130127TimeSeriesVars3D = (upwd, lwcon, iwcon, lcc3dcon, lcc3dstra, temp, theta, ovap, ovapinit, geop, vitu, vitv, vitw, pres, rneb, rnebcon, rhum, mc, paprs, scdnc, ec550aer, concoa, concbc, concso4, concss, concdust, reffclws, reffclwc, tnt, dtdyn, dtphy, dtlschr, tntr, tntscpbl, tnhus, dqdyn, dqvdf, tnhusscpbl, dqphy, evu, mcd) 
    131128ChunckJob3D = 100Y 

  • CONFIG/UNIFORM/v6/IPSLCM6/EXPERIMENTS/LMDZOR/clim/COMP/orchidee.card

    r2585 r2758  
    1010 
    1111VEGET_UPDATE=0Y 
    12 LAND_COVER_CHANGE=n 
    1312 
    1413[InitialStateFiles] 
    15 List=   (${R_IN}/SRF/soils_param.nc,      . ), \ 
    16         (${R_IN}/SRF/routing.nc,          . ), \ 
     14List=   (${R_IN}/SRF/soils_param.nc,        . ), \ 
     15        (${R_IN}/SRF/routing.nc,            . ), \ 
     16        (${R_IN}/SRF/albedo/alb_bg_jrctip.nc, . ), \ 
    1717        (${R_IN}/SRF/PFTmap_1850to2005_AR5_LUHa.rc2/PFTmap_IPCC_2000.nc, PFTmap.nc), \ 
    1818        (${R_IN}/SRF/cartepente2d_15min.nc, .) 
    … …  
    2727[ParametersFiles] 
    2828List=   (${SUBMIT_DIR}/PARAM/orchidee.def_${DefSuffix}, orchidee.def)   ,\ 
     29        (${MODIPSL}/modeles/ORCHIDEE/src_xml/file_def_orchidee.xml, .)  ,\ 
    2930        (${MODIPSL}/modeles/ORCHIDEE/src_xml/context_orchidee.xml, .)   ,\ 
    30         (${MODIPSL}/modeles/ORCHIDEE/src_xml/field_def_orchidee.xml, .) ,\ 
    31         (${MODIPSL}/modeles/ORCHIDEE/src_xml/file_def_orchidee.xml, .) 
     31        (${MODIPSL}/modeles/ORCHIDEE/src_xml/field_def_orchidee.xml, .) 
    3232 
    3333[RestartFiles] 
    34 # List restart that have to be saved/restored each loop (file out, saved, and in) : 
    3534List=   (sechiba_rest_out.nc, sechiba_rest.nc, sechiba_rest_in.nc) 
    3635 
    3736[OutputText] 
    38 List=   (out_orchidee, orchidee.def, used_orchidee.def, iodef.xml, context_orchidee.xml, field_def_orchidee.xml, file_def_orchidee.xml) 
     37List=   (out_orchidee, orchidee.def, used_orchidee.def, iodef.xml, context_orchidee.xml, field_def_orchidee.xml, file_def_orchidee.xml, river_desc.nc) 
    3938 
    4039[OutputFiles] 
    … …  
    4645Patches = () 
    4746GatherWithInternal = (lon, lat, time_counter, Areas, Contfrac, time_counter_bounds) 
    48 TimeSeriesVars2D = (nobiofrac, alb_nir, alb_vis, bqsb, evap, fluxlat, fluxsens, gqsb, netrad, qair, rain, runoff, snow, snownobio, snowf, subli, tair, temp_sol, tsol_max, tsol_min, drainage,mrsos, mrso, mrros, mrro, prveg, evspsblveg, evspsblsoi, tran, treeFrac, grassFrac, cropFrac, baresoilFrac, residualFrac) 
     47TimeSeriesVars2D = (nobiofrac, alb_nir, alb_vis, evap, fluxlat, fluxsens, netrad, qair, rain, runoff, snow, snownobio, snowf, subli, tair, temp_sol, tsol_max, tsol_min, drainage,mrsos, mrso, mrros, mrro, prveg, evspsblveg, evspsblsoi, tran, treeFrac, grassFrac, cropFrac, baresoilFrac, residualFrac, TWBR) 
    4948ChunckJob2D = NONE 
    5049TimeSeriesVars3D = (lai, maxvegetfrac, vegetfrac, ptn, nee) 
    … …  
    6059ChunckJob3D = 10Y 
    6160Seasonal = OFF 
     61 

  • CONFIG/UNIFORM/v6/IPSLCM6/EXPERIMENTS/LMDZOR/clim/COMP/stomate.card

    r2585 r2758  
    99[BoundaryFiles] 
    1010List=   () 
    11 ListNonDel= (${R_IN}/SRF/reftemp.nc, .) 
     11ListNonDel= () 
    1212 
    1313[SmoothFiles] 
    … …  
    1818 
    1919[RestartFiles] 
    20 # List restart that have to be saved/restored each loop (file out, saved, and in) : 
    2120List=   (stomate_rest_out.nc, stomate_rest.nc, stomate_rest_in.nc) 
    2221 
    … …  
    3029[Post_1M_stomate_history] 
    3130Patches= () 
    32 GatherWithInternal= (lon, lat, PFT, time_counter, time_counter_bounds, Areas) 
     31GatherWithInternal= (lon, lat, time_counter, time_counter_bounds, Areas) 
    3332TimeSeriesVars2D= (T2M_MONTH,CONTFRAC,RESOLUTION_X,RESOLUTION_Y,CONVFLUX,CFLUX_PROD10,CFLUX_PROD100,HARVEST_ABOVE) 
    3433ChunckJob2D = NONE 
    35 TimeSeriesVars3D = (CO2FLUX_MONTHLY,LAI,VEGET,VEGET_MAX,NPP,GPP,HET_RESP,MAINT_RESP,GROWTH_RESP,AGE,HEIGHT,TOTAL_M,TOTAL_BM_LITTER,TOTAL_SOIL_CARB,CO2_FIRE) 
     34TimeSeriesVars3D = (CO2FLUX,LAI,VEGET_MAX,NPP,GPP,HET_RESP,MAINT_RESP,GROWTH_RESP,AGE,HEIGHT,TOTAL_M,TOTAL_BM_LITTER,TOTAL_SOIL_CARB,CO2_FIRE) 
    3635ChunckJob3D = NONE 
    3736Seasonal=ON 
    … …  
    3938[Post_1M_stomate_ipcc_history] 
    4039Patches= () 
    41 GatherWithInternal= (lon, lat, PFT, time_counter, time_counter_bounds, Areas, CONTFRAC) 
     40GatherWithInternal= (lon, lat, time_counter, time_counter_bounds, Areas, CONTFRAC) 
    4241TimeSeriesVars2D=(cVeg, cLitter, cSoil, cProduct, lai, gpp, ra, npp, rh, fFire, fHarvest, fLuc, nbp, fVegLitter, fLitterSoil, cLeaf, cWood, cRoot, cMisc, cLitterAbove, cLitterBelow, cSoilFast, cSoilMedium, cSoilSlow, landCoverFrac, treeFracPrimDec, treeFracPrimEver, c3PftFrac, c4PftFrac, rGrowth, rMaint, nppLeaf, nppWood, nppRoot, nep) 
    4342ChunckJob2D = NONE 
    … …  
    4544ChunckJob3D = NONE 
    4645Seasonal=ON 
     46 
Note: See TracChangeset for help on using the changeset viewer.