Index: CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/.chimie
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/.chimie	(revision 3559)
+++ CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/.chimie	(revision 3559)
@@ -0,0 +1,1 @@
+CHEM=NMHC
Index: CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/.resol
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/.resol	(revision 3559)
+++ CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/.resol	(revision 3559)
@@ -0,0 +1,2 @@
+NMHCxLMD9695-L39
+RESOL_ATM_3D=96x95x39
Index: CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/AA_make
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/AA_make	(revision 3559)
+++ CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/AA_make	(revision 3559)
@@ -0,0 +1,52 @@
+#- $Id$
+
+
+all : 
+	if [ -s ./.resol ] ; then $(M_K) `head -1 .resol` ; else $(M_K) NMHCxLMD9695-L39 ; fi
+
+
+
+NMHCxLMD9695-L39 : libioipsl xios liborchidee nmhc96x95x39 lmdz96x95x39 verif
+	echo "NMHCxLMD9695-L39" >.resol
+	echo "RESOL_ATM_3D=96x95x39" >>.resol
+	echo "CHEM=NMHC" > .chimie
+
+
+xios :
+	(cd  ../../modeles/XIOS ; ./make_xios  --arch ${FCM_ARCH} --job 8 ; cp bin/xios_server.exe ../../bin/. ; )
+
+libioipsl : ../../modeles/IOIPSL/src
+	(cd ../../modeles/IOIPSL/src ; $(M_K) -f Makefile)
+
+
+liborchidee : ../../modeles/ORCHIDEE/
+	(cd ../../modeles/ORCHIDEE/ ; ./makeorchidee_fcm  -parallel mpi -prod -xios -arch $(FCM_ARCH) -j 8  -driver -xios2)
+
+
+nmhc96x95x39:
+	$(M_K) inca RESOL_INCA=96x95x39 CHIMIE=NMHC
+
+
+lmdz96x95x39:
+	$(M_K) lmdz RESOL_LMDZ=96x95x39
+
+
+
+inca: ../../modeles/INCA
+#	(cd ../../modeles/INCA; ./makeinca_fcm -chimie $(CHIMIE) -prod  -resol $(RESOL_INCA) -j 8 -arch $(FCM_ARCH); cp SIMULATIONS/$(CHIMIE)/inca.dat ../../bin/inca.dat ; )
+	(cd ../../modeles/INCA; ./makeinca_fcm -chimie $(CHIMIE) -prod -xios -parallel mpi -resol $(RESOL_INCA) -j 8 -arch $(FCM_ARCH); cp SIMULATIONS/$(CHIMIE)/inca.dat ../../bin/inca.dat ; )
+
+lmdz: ../../modeles/LMDZ
+#	(cd ../../modeles/LMDZ; ./makelmdz_fcm -d $(RESOL_LMDZ) -prod -chimie INCA  -arch $(FCM_ARCH) -j 8 ce0l ; mv bin/ce0l_$(RESOL_LMDZ)_phylmd_seq_inca.e ../../bin/create_etat0_limit.e ; )
+	(cd ../../modeles/LMDZ; ./makelmdz_fcm -ext_src ../REPROBUS -cpp REPROBUS -d $(RESOL_LMDZ) -prod -rrtm true -chimie INCA -io xios  -mem -cosp false -v true -parallel mpi -arch $(FCM_ARCH) -j 8  gcm ; mv bin/gcm_$(RESOL_LMDZ)_phylmd_para_mem_orch_inca.e ../../bin/gcm.e ; )
+
+
+verif: ../../bin
+	ls -l ../../bin
+
+clean :
+	(rm -rf $(LIBDIR)/* ; rm -rf ../../modeles/LMDZ/libo/* ../../modeles/LMDZ/.lock ; )
+	(cd ../../modeles/IOIPSL/src ; ${M_K} clean ; )
+	(cd ../../modeles/ORCHIDEE ; ./makeorchidee_fcm -clean ; )
+	(cd  ../../modeles/INCA ; ./makeinca_fcm -clean )
+
Index: CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/AA_make.ldef
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/AA_make.ldef	(revision 3559)
+++ CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/AA_make.ldef	(revision 3559)
@@ -0,0 +1,11 @@
+#- $Id$
+#---------------------------------------------------------------------
+#- Initialisations for IPSLCM5 configuration
+#---------------------------------------------------------------------
+SHELL = /bin/sh
+#---------------------------------------------------------------------
+LIBDIR = ../../lib
+BINDIR = ../../bin
+MODDIR = $(LIBDIR)
+#---------------------------------------------------------------------
+#-
Index: CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/EXPERIMENTS/LMDZORINCA/COMP/inca.card
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/EXPERIMENTS/LMDZORINCA/COMP/inca.card	(revision 3559)
+++ CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/EXPERIMENTS/LMDZORINCA/COMP/inca.card	(revision 3559)
@@ -0,0 +1,94 @@
+#- $Id: inca.card 70 2007-06-21 14:20:42Z acosce $
+[Compatibility]
+libIGCM=1.0
+
+[UserChoices]
+# Set LMDZ_10m_winds to choose if the simulation will use online 10m wind (=y) or offline (=n)
+LMDZ_10m_winds=y
+# Set 10m_Winds_method to choose which way we will use to work with 10m wind from gcm (so if LMDZ_10m_winds=y)
+#10m_winds_method=weibull10 --> use weibull method for 10m wind from gcm,
+#10m_winds_method=threshold --> use threshold method for 10m wind from gcm
+10m_winds_method=threshold
+# Set climatological to choose the write_frequency for inca output (inca_avgr, forcage, inca_inst)
+# 86400 = daily output
+freq_write_chem=86400
+# heat fluxes computed with feedback corresponding to 0 --> no aerosol effects, 1--> aerosol effects selected by ok_ade, ok_aie
+feedb=0
+#choose sedimentation multilayer or one layer 
+multilayer_sedim=y
+#coupled model with ORCH
+#if yes, you need to put to CHEMISTRY_BVOC=y in orchidee.def and decomment lines for fertilizer and bbg in orchidee.card
+CoupOrchInca=n
+#active or not chemistry flux in output 
+calcul_flux=y
+
+
+# Use XIOS and/or IOIPSL as output library
+XIOS=y
+IOIPSL=n
+
+[InitialStateFiles]
+List= ()
+	
+[BoundaryFiles]
+List=()
+
+ListNonDel= (${R_IN}/CHM/INCA${RESOL_CHT}/npp.nc		,   npp.nc		)\
+            (${R_IN}/CHM/INCA${RESOL_CHT}/o3clim.nc		,   o3clim.nc		)\
+	    (${R_IN}/CHM/INCA${RESOL_CHT}/so4.nc		,   so4.nc		)\
+            (${R_IN}/CHM/INCA${RESOL_CHT}/aircraft.nc		,   aircraft.nc    	)\
+            (${R_IN}/CHM/INCA${RESOL_CHT}/sflx_nitrate.nc	,   sflx.nc		)\
+	    (${R_IN}/CHM/INCA${RESOL_CHT}/landuse.nc		,   landuse.nc		)\
+            (${R_IN}/CHM/INCA${RESOL_CHT}/rhvEC.txt		,   rhvEC.txt		)\
+            (${R_IN}/CHM/INCA${RESOL_CHT}/wthEC.txt		,   wthEC.txt		)\
+            (${R_IN}/CHM/INCA${RESOL_CHT}/clyEC.txt		,   clyEC.txt		)\
+            (${R_IN}/CHM/INCA${RESOL_CHT}/wth.dat		,   wth.dat		)\
+            (${R_IN}/CHM/INCA${RESOL_CHT}/cly.dat		,   cly.dat		)\
+ 	    (${R_IN}/CHM/INCA${RESOL_CHT}/rhv.dat		,   rhv.dat		)\
+	    (${R_IN}/CHM/INCA${RESOL_CHT}/phototable_glo.dat   	,   phototable.dat	)
+
+
+[ParametersFiles]
+List=	(${SUBMIT_DIR}/PARAM/inca.def, .),\
+	(${MODIPSL}/modeles/INCA/src/INCA_XML/context_inca.xml, .)   ,\
+	(${MODIPSL}/modeles/INCA/src/INCA_XML/field_def_inca.xml, .) ,\
+	(${MODIPSL}/modeles/INCA/src/INCA_XML/file_def_inca_NMHC.xml, file_def_inca.xml), \
+    	(${MODIPSL}/bin/inca.dat, .)
+
+[RestartFiles]
+# List restart that have to be saved/restored each loop (file out, saved, and in) :
+List= (NONE) 
+
+
+[OutputText]
+List=(inca.out, inca.def,context_inca.xml,field_def_inca.xml,file_def_inca.xml)
+
+[OutputFiles]
+List=	(inca_emi.nc,      ${R_OUT_CHT_O_D}/${PREFIX}_1D_inca_emi.nc,    NONE  ),\
+	(inca_species.nc,      ${R_OUT_CHT_O_D}/${PREFIX}_1D_inca_species.nc, Post_1D_inca_species  ),\
+	(inca_dvel.nc,      ${R_OUT_CHT_O_D}/${PREFIX}_1D_inca_dvel.nc,    NONE  ),\
+	(inca_chem.nc,      ${R_OUT_CHT_O_D}/${PREFIX}_1D_inca_chem.nc,  Post_1D_inca_chem  ),\
+	(inca_reacflux.nc,      ${R_OUT_CHT_O_D}/${PREFIX}_1D_inca_reacflux.nc,    NONE  ),\
+	(inca_washrate.nc,      ${R_OUT_CHT_O_D}/${PREFIX}_1D_inca_washrate.nc,    NONE  )
+
+
+
+[Post_1D_inca_species]
+Patches= ()
+GatherWithInternal = (lon, lat, presnivs, time_centered, time_centered_bounds,time_counter, area)
+TimeSeriesVars2D = ()
+ChunckJob2D = NONE
+TimeSeriesVars3D = (vmrno,vmrno2,vmro3,vmrch4,vmrco,vmrno3, vmrhno3)
+ChunckJob3D = NONE
+Seasonal=OFF
+
+
+[Post_1D_inca_chem]
+Patches= ()
+GatherWithInternal = (lon, lat, presnivs,time_centered, time_centered_bounds, time_counter, area)
+TimeSeriesVars2D = (colo3, colco, colno2, colch2o, colch4, colhno2, coloh, colso2)
+ChunckJob2D = NONE
+TimeSeriesVars3D = ()
+ChunckJob3D = NONE
+Seasonal=OFF
+
Index: CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/EXPERIMENTS/LMDZORINCA/COMP/lmdz.card
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/EXPERIMENTS/LMDZORINCA/COMP/lmdz.card	(revision 3559)
+++ CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/EXPERIMENTS/LMDZORINCA/COMP/lmdz.card	(revision 3559)
@@ -0,0 +1,118 @@
+#- $Id: lmdz.card 70 2007-06-21 14:20:42Z acosce $
+[Compatibility]
+libIGCM=1.0
+
+[UserChoices]
+# Physics package to use :
+# LMDZ_Physics=AP for standard/old physics(defalut), can be used with LMDZ4_AR5 or LMDZ5/trunk sources
+# LMDZ_Physics=NPv3.2 for new physics, to be used with LMDZ5/trunk revision 1554 or later
+# LMDZ_Physics=NPv5.4 for new physics to be used with LMDZ5/trunk revision 2449 or later
+# LMDZ_Physics=NPv5.67 for new physics to be used with LMDZ5/testing revision 2546 or later
+# LMDZ_Physics=NPv5.70 for new physics to be used with LMDZ5/testing revision 2595 or later
+LMDZ_Physics=AP
+
+# Use XIOS as output library
+XIOS=y
+
+# Set the variable CREATE needed further below to find the initial and boundary condition files.
+CREATE=ELC-${RESOL_ATM_3D}
+
+# ByPass_hgardfou_teta=y : modify teta_ parameters for following CumulPeriod only
+ByPass_hgardfou_teta=n
+
+# ByPass_hgardfou_mats=y : set parameter purmats=y for following CumulPeriod only
+ByPass_hgardfou_mats=n
+
+# Set ConfType to choose parameters for aerosols, solar and green house gazes. 
+# The parameter file PARAM/config.def_$ConfType will be used.
+# ConfType=preind/actuel/annuel
+ConfType=actuel
+
+# manage radiative aerosol effect and ozone 
+flag_aerosol=0
+ok_ade=n
+ok_aie=n
+aerosol_couple=n
+read_climoz=0
+ok_cdnc=n
+
+# Set OutLevel to choose the level of output for LMDZ. 
+# OutLevel=low/medium/high
+OutLevel=low
+
+# COSP activation and choose of output frequency for COSP (monthly, daily, HF) = y/n
+LMDZ_COSP_OK=n
+LMDZ_COSP_monthly=n
+LMDZ_COSP_daily=n
+LMDZ_COSP_hf=n
+
+# Set NMC Outputs frequency (monthly, daily, HF) = y/n
+LMDZ_NMC_monthly=n
+LMDZ_NMC_daily=n
+LMDZ_NMC_hf=n
+
+
+# Nugding : ok_guide=y/n
+# If ok_guide=y, add nudging files(u.nc, v.nc, hur.nc,...) in BoundaryFiles section below.
+ok_guide=n
+
+
+[InitialStateFiles]
+# start and startphy are the clim files computed with CLIM_CREATE (create_etat0_limit) job
+List= 	($SCRATCHDIR/INIT_FILE/INCA_REPR_v2/inca_repr_restart.nc	, start.nc	) \
+	($SCRATCHDIR/INIT_FILE/startphy_nitrate.nc	, startphy.nc	)
+
+
+[BoundaryFiles]
+List=   (${R_IN}/ATM/${RESOL_ATM}/LIMIT/ERAI/leap/limit_${year}.nc , limit.nc)
+
+#	(${R_IN}/ATM/${RESOL_ATM}/NUDGE_FILES/ERAI/AN${year}/u_ecmwf_${year}${month}.nc 	, u.nc		),\
+#	(${R_IN}/ATM/${RESOL_ATM}/NUDGE_FILES/ERAI/AN${year}/v_ecmwf_${year}${month}.nc 	, v.nc		)
+ 
+ListNonDel= ()
+
+[ParametersFiles]
+List=   (${SUBMIT_DIR}/PARAM/physiq.def_${LMDZ_Physics}, physiq.def),       \
+        (${SUBMIT_DIR}/PARAM/gcm.def_${RESOL_ATM_XY}_${LMDZ_Physics},    gcm.def),          \
+        (${SUBMIT_DIR}/PARAM/vert.def_L${RESOL_ATM_Z},   vert.def),         \
+        (${MODIPSL}/modeles/LMDZ/DefLists/cosp_input_nl.txt, .),            \
+        (${MODIPSL}/modeles/LMDZ/DefLists/cosp_output_nl.txt, .),           \
+        (${SUBMIT_DIR}/PARAM/config.def_${ConfType},  config.def),          \
+        (${SUBMIT_DIR}/PARAM/guide.def, .),                                 \
+        (${SUBMIT_DIR}/PARAM/run.def, .),                                   \
+        (${SUBMIT_DIR}/PARAM/iodef.xml, . ),                                \
+	(${SUBMIT_DIR}/PARAM/traceur.def_h2o_${LMDZ_Physics}, traceur.def), \
+        (${MODIPSL}/modeles/LMDZ/DefLists/context_lmdz.xml, . ),            \
+        (${MODIPSL}/modeles/LMDZ/DefLists/field_def_lmdz.xml, . ),	    \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histmth_lmdz.xml, . ),   \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histmthCOSP_lmdz.xml, .),\
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histmthNMC_lmdz.xml, . ),\
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histday_lmdz.xml, . ),   \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histdayCOSP_lmdz.xml, .),\
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histdayNMC_lmdz.xml, . ),\
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histhf_lmdz.xml, . ),    \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histhfCOSP_lmdz.xml, .), \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histhfNMC_lmdz.xml, . ), \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histstn_lmdz.xml, . ),   \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histstrataer_lmdz.xml, . ),\
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histins_lmdz.xml, . ),   \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histLES_lmdz.xml, . )
+
+[RestartFiles]
+List=	(restart.nc, restart.nc, start.nc), \
+	(restartphy.nc, restartphy.nc,  startphy.nc) 
+
+[OutputText]
+List=   (physiq.def, gcm.def, vert.def, run.def, traceur.def, guide.def, config.def, used_run.def, iodef.xml, context_lmdz.xml, field_def_lmdz.xml, file_def_*lmdz.xml, debug.01, lmdz.prt, out_gcm.e.err, out_gcm.e.out)
+
+[OutputFiles]
+List=	(histmth.nc,      ${R_OUT_ATM_O_M}/${PREFIX}_1M_histmth.nc,   Post_1M_histmth   )	
+
+[Post_1M_histmth]
+Patches= ()
+GatherWithInternal = (lon, lat, presnivs, time_counter, time_centered, time_centered_bounds, aire)
+TimeSeriesVars2D = (bils, cldh, cldl, cldm, cldq, cldt, evap, flat, ftime_con, iwp, lwp, LWdnSFC, LWdnSFCclr, LWupSFCclr, LWdn200, LWdn200clr, LWup200, LWup200clr, precip, prw, pluc, psol, q2m, rh2m, sens, sicf, slp, snow, soll0, soll, sols0, sols, SWdnSFC, SWupSFC, SWup200, SWdnTOA, SWupTOA, SWdn200, SWdnSFCclr, SWupSFCclr, SWupTOAclr, t2m, t2m_max, t2m_min, taux, taux_ter, taux_sic, taux_lic, taux_oce, tauy, tauy_ter, tauy_sic, tauy_lic, tauy_oce, lat_ter, lat_sic, lat_lic, lat_oce, nettop, pbase, ptop, topl0, topl, tops0, tops, topswad, topswai, tsol, tsol_ter, tsol_lic, tsol_oce, tsol_sic , u10m, u500, v10m, v500, w500, pourc_ter, pourc_oce, pourc_sic, pourc_lic, wind10m, od550aer, od550lt1aer, absvisaer, loadoa, loadbc, loadso4, loaddust, loadss, sconcoa, sconcbc, sconcso4, sconcdust, sconcss, reffclwtop, cldncl, swtoaas_ant, swtoacs_ant, swtoacf_ant, swsrfas_ant, swsrfcs_ant, swsrfcf_ant, swtoaas_nat, swtoacs_nat, swtoacf_nat, swsrfas_nat, swsrfcs_nat, swsrfcf_nat, solswai, solswad, swtoacf_zero, swsrfcf_zero)
+ChunckJob2D = 100Y
+TimeSeriesVars3D = (OX, O3I, NOx, CH4, N2O, HNO3, NOy, H2SO4, CH2O, HNO3_g, upwd, lwcon, iwcon, lcc3dcon, lcc3dstra, temp, theta, ovap, ovapinit, geop, vitu, vitv, vitw, pres, rneb, rnebcon, rhum, mc, paprs, scdnc, ec550aer, concoa, concbc, concso4, concss, concdust, reffclws, reffclwc, tnt, dtdyn, dtphy, dtlschr, tntr, tntscpbl, tnhus, dqdyn, dqvdf, tnhusscpbl, dqphy, evu, mcd)
+ChunckJob3D = 100Y
+Seasonal=ON
Index: CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/EXPERIMENTS/LMDZORINCA/COMP/orchidee.card
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/EXPERIMENTS/LMDZORINCA/COMP/orchidee.card	(revision 3559)
+++ CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/EXPERIMENTS/LMDZORINCA/COMP/orchidee.card	(revision 3559)
@@ -0,0 +1,59 @@
+[Compatibility]
+libIGCM=1.0
+
+[UserChoices]
+# The variable DefSuffix gives the suffix of the orchidee.def file to be used.
+# By default the file orchidee.def_Choi will be selected.
+# Sef DefSuffix=Choi (default) to activate default 2-layer Choisnel hydrology
+# Set DefSuffix=CWRR to activate 11-layer CWRR hydrology
+DefSuffix=Choi
+
+VEGET_UPDATE=1Y
+
+[InitialStateFiles]
+List=	(${R_IN}/SRF/soils_param.nc,        . ), \
+	(${R_IN}/SRF/routing.nc,            . ), \
+        (${R_IN}/SRF/albedo/alb_bg_modisopt_2D.nc, alb_bg.nc ), \
+        (${R_IN}/SRF/cartepente2d_15min.nc, .)
+
+[BoundaryFiles]
+List=(${R_IN}/SRF/PFTmap_1850to2005_AR5_LUHa.rc2/PFTmap_IPCC_${year}.nc, PFTmap.nc)
+ListNonDel= ()
+
+[SmoothFiles]
+List= ()
+
+[ParametersFiles]
+List=	(${SUBMIT_DIR}/PARAM/orchidee.def_${DefSuffix}, orchidee.def)   ,\
+	(${MODIPSL}/modeles/ORCHIDEE/src_xml/file_def_orchidee.xml, .)  ,\
+	(${MODIPSL}/modeles/ORCHIDEE/src_xml/context_orchidee.xml, .)   ,\
+	(${MODIPSL}/modeles/ORCHIDEE/src_xml/field_def_orchidee.xml, .)
+
+[RestartFiles]
+List=	(sechiba_rest_out.nc, sechiba_rest.nc, sechiba_rest_in.nc)
+
+[OutputText]
+List=   (out_orchidee, orchidee.def, used_orchidee.def, iodef.xml, context_orchidee.xml, field_def_orchidee.xml, file_def_orchidee.xml, river_desc.nc)
+
+[OutputFiles]
+List=   (sechiba_history.nc,   ${R_OUT_SRF_O_M}/${PREFIX}_1M_sechiba_history.nc, Post_1M_sechiba_history), \
+        (sechiba_out_2.nc,     ${R_OUT_SRF_O_H}/${PREFIX}_HF_sechiba_out_2.nc,   NONE)
+
+[Post_1M_sechiba_history]
+Patches = ()
+GatherWithInternal = (lon, lat, time_counter, Areas, Contfrac, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (nobiofrac, alb_nir, alb_vis, evap, fluxlat, fluxsens, netrad, qair, rain, runoff, snow, snownobio, snowf, frac_snow, subli, tair, temp_sol, tsol_max, tsol_min, drainage,mrsos, mrso, mrros, mrro, prveg, evspsblveg, evspsblsoi, tran, treeFrac, grassFrac, cropFrac, baresoilFrac, residualFrac, TWBR, riverflow, coastalflow, DelSoilMoist_daily, DelIntercept_daily, DelSWE_daily, delstock_routing, snowmelt, LAImean)
+ChunckJob2D = NONE
+TimeSeriesVars3D = (lai, maxvegetfrac, vegetfrac, ptn, nee)
+ChunckJob3D = NONE
+Seasonal = ON
+
+[Post_HF_sechiba_out_2]
+Patches = ()
+GatherWithInternal = (lon, lat, time_counter, Areas, Contfrac, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (mrsos, mrro)
+ChunckJob2D = 50Y
+TimeSeriesVars3D = (ptn)
+ChunckJob3D = 10Y
+Seasonal = OFF
+
Index: CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/EXPERIMENTS/LMDZORINCA/COMP/stomate.card
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/EXPERIMENTS/LMDZORINCA/COMP/stomate.card	(revision 3559)
+++ CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/EXPERIMENTS/LMDZORINCA/COMP/stomate.card	(revision 3559)
@@ -0,0 +1,45 @@
+[Compatibility]
+libIGCM=1.0
+
+[UserChoices]
+
+[InitialStateFiles]
+List=   ()
+
+[BoundaryFiles]
+List=	()
+ListNonDel= ()
+
+[SmoothFiles]
+List=	()
+
+[ParametersFiles]
+List=   ()
+
+[RestartFiles]
+List=	(stomate_rest_out.nc, stomate_rest.nc, stomate_rest_in.nc)
+
+[OutputText]
+List=   ()
+
+[OutputFiles]
+List=   (stomate_history.nc,      ${R_OUT_SBG_O_M}/${PREFIX}_1M_stomate_history.nc,      Post_1M_stomate_history),    \
+        (stomate_ipcc_history.nc, ${R_OUT_SBG_O_M}/${PREFIX}_1M_stomate_ipcc_history.nc, Post_1M_stomate_ipcc_history)
+
+[Post_1M_stomate_history]
+Patches= ()
+GatherWithInternal= (lon, lat, time_counter, time_counter_bounds, Areas)
+TimeSeriesVars2D= (T2M_MONTH,CONTFRAC,RESOLUTION_X,RESOLUTION_Y,CONVFLUX,CFLUX_PROD10,CFLUX_PROD100,HARVEST_ABOVE)
+ChunckJob2D = NONE
+TimeSeriesVars3D = (CO2FLUX,LAI,VEGET_MAX,NPP,GPP,HET_RESP,MAINT_RESP,GROWTH_RESP,AGE,HEIGHT,TOTAL_M,TOTAL_BM_LITTER,TOTAL_SOIL_CARB,CO2_FIRE)
+ChunckJob3D = NONE
+Seasonal=ON
+
+[Post_1M_stomate_ipcc_history]
+Patches= ()
+GatherWithInternal= (lon, lat, time_counter, time_counter_bounds, Areas, CONTFRAC)
+TimeSeriesVars2D=(cVeg, cLitter, cSoil, cProduct, lai, gpp, ra, npp, rh, fFire, fHarvest, fLuc, nbp, fVegLitter, fLitterSoil, cLeaf, cWood, cRoot, cMisc, cLitterAbove, cLitterBelow, cSoilFast, cSoilMedium, cSoilSlow, landCoverFrac, treeFracPrimDec, treeFracPrimEver, c3PftFrac, c4PftFrac, rGrowth, rMaint, nppLeaf, nppWood, nppRoot, nep)
+ChunckJob2D = NONE
+TimeSeriesVars3D=()
+ChunckJob3D = NONE
+Seasonal=ON
Index: CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/EXPERIMENTS/LMDZORINCA/COMP/xios.card
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/EXPERIMENTS/LMDZORINCA/COMP/xios.card	(revision 3559)
+++ CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/EXPERIMENTS/LMDZORINCA/COMP/xios.card	(revision 3559)
@@ -0,0 +1,29 @@
+[Compatibility]
+libIGCM=1.0
+
+[UserChoices]
+
+[InitialStateFiles]
+List=	()
+
+[BoundaryFiles]
+List=	()
+ListNonDel= ()
+
+[SmoothFiles]
+List=	()
+
+[ParametersFiles]
+List=	()
+
+[RestartFiles]
+List=	(NONE)
+
+[OutputText]
+List=   (xios_client_*,out_xios.x.err.*, out_xios.x.out.*)
+
+[OutputFiles]
+List=   ()
+
+
+
Index: CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/EXPERIMENTS/LMDZORINCA/config.card
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/EXPERIMENTS/LMDZORINCA/config.card	(revision 3559)
+++ CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/EXPERIMENTS/LMDZORINCA/config.card	(revision 3559)
@@ -0,0 +1,148 @@
+#- $Id: config.card 69 2007-06-21 14:08:22Z acosce $
+#========================================================================
+#D-- Carte pour run AR5WERF -- 
+#D-- Les fichiers sflx - aircraft - start - startphy créés par S. Szopa
+#D--
+#========================================================================
+#D-- Compatibility -
+[Compatibility]
+libIGCM=1.0
+#========================================================================
+#D-- UserChoices -
+[UserChoices]
+#============================
+#D-- (<8 chars MAX for JobName)
+JobName=LOI.01
+SpaceName=TEST
+ExperimentName=NMHC
+LongName='nouvelles configs + LMDZ5 INCA5 39 + Xios + possibilite nouvelle physique '
+TagName=LMDZORINCA
+#D- Choice of experiment in EXPERIEMENTS directory
+ExpType=LMDZORINCA
+#============================
+#D-- leap, noleap, 360d
+CalendarType=leap
+#D-- Début et fin de Job
+#D-- "YYYY-MM-DD"
+DateBegin=2006-01-01
+DateEnd=2006-01-01
+#============================
+#D-- 1Y, 1M, 5D, 1D
+PeriodLength=1D
+#============================
+#D-- ListOfComponents -
+[ListOfComponents]
+#D- For each component, Name of component, Tag of component
+ATM= (lmdz, LMDZ5)
+#SRF= (orchidee, orchidee_1_9_5)
+#SBG= (stomate, ORCHIDEE_1_9_5)
+CHT= (inca, INCA5) 
+#CHS= (reprobus, REPROBUS) 
+IOS= (xios, XIOS)
+
+#========================================================================
+#D-- Executable -
+[Executable]
+Name=gcm.e
+#D- For each component, Real name of executable, Name of executable for oasis
+ATM= (gcm.e, gcm.e, 32MPI, 1OMP)
+#SRF= ("", "")
+#SBG= ("", "")
+CHT= ("", "")
+#CHS= ("", "")
+IOS= (xios_server.exe, xios.x, 1MPI)
+
+#========================================================================
+#D-- Restarts -
+[Restarts]
+#D- If you want a GENERAL RULE FOR RESTARTS, put this flag to 'y'
+OverRule=n
+#D- Last day of the experience used as restart
+RestartDate=2005-12-31
+#D- Define restart simulation name (=> JOB_OS)
+RestartJobName=LOI_AR5WERF_E0_2006
+#D- Path Server Group Login (=> PSGL)
+RestartPath=/ccc/work/cont003/dsm/p24cozic/INPUT_INCA/IGCM_OUT/LMDZORINCA/NMHC_AER
+# Attention login depend de la machine
+
+#========================================================================
+#D-- Post -
+[Post]
+#D- Do we rebuild parallel output, this flag determines
+#D- frequency of rebuild submission
+RebuildFrequency=NONE
+#D- Do we pack restart and debug txt files, this flag determines
+#D- frequency of pack submission (use NONE for DRYRUN=3)
+PackFrequency=1Y
+#D- If you want to produce time series, this flag determines
+#D- frequency of post-processing submission
+TimeSeriesFrequency=NONE
+#D- If you want to produce seasonal average, this flag determines
+#D- the period of this average
+SeasonalFrequency=NONE
+#D- Offset for seasonal average first start dates ; same unit as SeasonalFrequency
+#D- Usefull if you do not want to consider the first X simulation s years
+SeasonalFrequencyOffset=0
+
+#========================================================================
+#D-- ATM -
+[ATM]
+#
+WriteFrequency="1M 1D HF"
+# If config_Restarts_OverRule == 'n' all params are read
+Restart= n
+# Last day of the experience used as restart
+RestartDate=2000-01-01
+# Define restart simulation name
+RestartJobName=JobName
+RestartPath=${ARCHIVE}/IGCM_OUT/LMDZORINCA/NMHC_AER
+
+#========================================================================
+#D-- SRF -
+[SRF]
+WriteFrequency="1M"
+Restart=n
+##-- Last day of the experience used as restart
+RestartDate=1999-12-30
+# Define restart simulation name
+RestartJobName=JobName
+RestartPath=${ARCHIVE}/IGCM_OUT/LMDZORINCA/NMHC_AER
+
+#========================================================================
+#D-- SBG - STOMATE
+[SBG]
+WriteFrequency="1M"
+# If config_Restarts_OverRule == 'n' next 4 params are read
+Restart=n
+#-- Last day of the experience used as restart for this component if Restart=y
+RestartDate=2000-01-31
+# Define restart simulation name for this component
+RestartJobName=EXP00
+RestartPath=${ARCHIVE}/IGCM_OUT/LMDZOR/DEVT/amip
+
+#========================================================================
+#D-- CHT -
+[CHT]
+#D-- choose inca writefrequency between 1D or 1M. it is not possible to cumulate both of them
+#D-- you can also manage the writefrequency in INCA/src/INCA_XML/file_*.xml files
+WriteFrequency="1D"
+Restart=n
+#D-- Last day of the experience used as restart
+RestartDate=2000-01-01
+#D-- Define restart simulation name
+RestartJobName=JobName
+RestartPath=${ARCHIVE}/IGCM_OUT/LMDZORINCA/NMHC_AER
+
+#========================================================================
+#D-- IOS -
+[IOS]
+WriteFrequency=""
+# If config_Restarts_OverRule == 'n' next 4 params are read
+Restart= n
+##-- Last day of the experience used as restart for this component if Restart=y
+RestartDate=
+# Define restart simulation name for this component
+RestartJobName=
+RestartPath=
+
+#========================================================================
Index: CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/EXPERIMENTS/LMDZORINCAREPR/COMP/inca.card
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/EXPERIMENTS/LMDZORINCAREPR/COMP/inca.card	(revision 3559)
+++ CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/EXPERIMENTS/LMDZORINCAREPR/COMP/inca.card	(revision 3559)
@@ -0,0 +1,94 @@
+#- $Id: inca.card 70 2007-06-21 14:20:42Z acosce $
+[Compatibility]
+libIGCM=1.0
+
+[UserChoices]
+# Set LMDZ_10m_winds to choose if the simulation will use online 10m wind (=y) or offline (=n)
+LMDZ_10m_winds=y
+# Set 10m_Winds_method to choose which way we will use to work with 10m wind from gcm (so if LMDZ_10m_winds=y)
+#10m_winds_method=weibull10 --> use weibull method for 10m wind from gcm,
+#10m_winds_method=threshold --> use threshold method for 10m wind from gcm
+10m_winds_method=threshold
+# Set climatological to choose the write_frequency for inca output (inca_avgr, forcage, inca_inst)
+# 86400 = daily output
+freq_write_chem=86400
+# heat fluxes computed with feedback corresponding to 0 --> no aerosol effects, 1--> aerosol effects selected by ok_ade, ok_aie
+feedb=0
+#choose sedimentation multilayer or one layer 
+multilayer_sedim=y
+#coupled model with ORCH
+#if yes, you need to put to CHEMISTRY_BVOC=y in orchidee.def and decomment lines for fertilizer and bbg in orchidee.card
+CoupOrchInca=n
+#active or not chemistry flux in output 
+calcul_flux=y
+
+
+# Use XIOS and/or IOIPSL as output library
+XIOS=y
+IOIPSL=n
+
+[InitialStateFiles]
+List= ()
+	
+[BoundaryFiles]
+List=()
+
+ListNonDel= (${R_IN}/CHM/INCA${RESOL_CHT}/npp.nc		,   npp.nc		)\
+            (${R_IN}/CHM/INCA${RESOL_CHT}/o3clim.nc		,   o3clim.nc		)\
+	    (${R_IN}/CHM/INCA${RESOL_CHT}/so4.nc		,   so4.nc		)\
+            (${R_IN}/CHM/INCA${RESOL_CHT}/aircraft.nc		,   aircraft.nc    	)\
+            (${R_IN}/CHM/INCA${RESOL_CHT}/sflx_nitrate.nc	,   sflx.nc		)\
+	    (${R_IN}/CHM/INCA${RESOL_CHT}/landuse.nc		,   landuse.nc		)\
+            (${R_IN}/CHM/INCA${RESOL_CHT}/rhvEC.txt		,   rhvEC.txt		)\
+            (${R_IN}/CHM/INCA${RESOL_CHT}/wthEC.txt		,   wthEC.txt		)\
+            (${R_IN}/CHM/INCA${RESOL_CHT}/clyEC.txt		,   clyEC.txt		)\
+            (${R_IN}/CHM/INCA${RESOL_CHT}/wth.dat		,   wth.dat		)\
+            (${R_IN}/CHM/INCA${RESOL_CHT}/cly.dat		,   cly.dat		)\
+ 	    (${R_IN}/CHM/INCA${RESOL_CHT}/rhv.dat		,   rhv.dat		)\
+	    (${R_IN}/CHM/INCA${RESOL_CHT}/phototable_glo.dat   	,   phototable.dat	)
+
+
+[ParametersFiles]
+List=	(${SUBMIT_DIR}/PARAM/inca.def, .),\
+	(${MODIPSL}/modeles/INCA/src/INCA_XML/context_inca.xml, .)   ,\
+	(${MODIPSL}/modeles/INCA/src/INCA_XML/field_def_inca.xml, .) ,\
+	(${MODIPSL}/modeles/INCA/src/INCA_XML/file_def_inca_NMHC.xml, file_def_inca.xml), \
+    	(${MODIPSL}/bin/inca.dat, .)
+
+[RestartFiles]
+# List restart that have to be saved/restored each loop (file out, saved, and in) :
+List= (NONE) 
+
+
+[OutputText]
+List=(inca.out, inca.def,context_inca.xml,field_def_inca.xml,file_def_inca.xml)
+
+[OutputFiles]
+List=	(inca_emi.nc,      ${R_OUT_CHT_O_D}/${PREFIX}_1D_inca_emi.nc,    NONE  ),\
+	(inca_species.nc,      ${R_OUT_CHT_O_D}/${PREFIX}_1D_inca_species.nc, Post_1D_inca_species  ),\
+	(inca_dvel.nc,      ${R_OUT_CHT_O_D}/${PREFIX}_1D_inca_dvel.nc,    NONE  ),\
+	(inca_chem.nc,      ${R_OUT_CHT_O_D}/${PREFIX}_1D_inca_chem.nc,  Post_1D_inca_chem  ),\
+	(inca_reacflux.nc,      ${R_OUT_CHT_O_D}/${PREFIX}_1D_inca_reacflux.nc,    NONE  ),\
+	(inca_washrate.nc,      ${R_OUT_CHT_O_D}/${PREFIX}_1D_inca_washrate.nc,    NONE  )
+
+
+
+[Post_1D_inca_species]
+Patches= ()
+GatherWithInternal = (lon, lat, presnivs, time_centered, time_centered_bounds,time_counter, area)
+TimeSeriesVars2D = ()
+ChunckJob2D = NONE
+TimeSeriesVars3D = (vmrno,vmrno2,vmro3,vmrch4,vmrco,vmrno3, vmrhno3)
+ChunckJob3D = NONE
+Seasonal=OFF
+
+
+[Post_1D_inca_chem]
+Patches= ()
+GatherWithInternal = (lon, lat, presnivs,time_centered, time_centered_bounds, time_counter, area)
+TimeSeriesVars2D = (colo3, colco, colno2, colch2o, colch4, colhno2, coloh, colso2)
+ChunckJob2D = NONE
+TimeSeriesVars3D = ()
+ChunckJob3D = NONE
+Seasonal=OFF
+
Index: CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/EXPERIMENTS/LMDZORINCAREPR/COMP/lmdz.card
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/EXPERIMENTS/LMDZORINCAREPR/COMP/lmdz.card	(revision 3559)
+++ CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/EXPERIMENTS/LMDZORINCAREPR/COMP/lmdz.card	(revision 3559)
@@ -0,0 +1,118 @@
+#- $Id: lmdz.card 70 2007-06-21 14:20:42Z acosce $
+[Compatibility]
+libIGCM=1.0
+
+[UserChoices]
+# Physics package to use :
+# LMDZ_Physics=AP for standard/old physics(defalut), can be used with LMDZ4_AR5 or LMDZ5/trunk sources
+# LMDZ_Physics=NPv3.2 for new physics, to be used with LMDZ5/trunk revision 1554 or later
+# LMDZ_Physics=NPv5.4 for new physics to be used with LMDZ5/trunk revision 2449 or later
+# LMDZ_Physics=NPv5.67 for new physics to be used with LMDZ5/testing revision 2546 or later
+# LMDZ_Physics=NPv5.70 for new physics to be used with LMDZ5/testing revision 2595 or later
+LMDZ_Physics=AP
+
+# Use XIOS as output library
+XIOS=y
+
+# Set the variable CREATE needed further below to find the initial and boundary condition files.
+CREATE=ELC-${RESOL_ATM_3D}
+
+# ByPass_hgardfou_teta=y : modify teta_ parameters for following CumulPeriod only
+ByPass_hgardfou_teta=n
+
+# ByPass_hgardfou_mats=y : set parameter purmats=y for following CumulPeriod only
+ByPass_hgardfou_mats=n
+
+# Set ConfType to choose parameters for aerosols, solar and green house gazes. 
+# The parameter file PARAM/config.def_$ConfType will be used.
+# ConfType=preind/actuel/annuel
+ConfType=actuel
+
+# manage radiative aerosol effect and ozone 
+flag_aerosol=0
+ok_ade=n
+ok_aie=n
+aerosol_couple=n
+read_climoz=0
+ok_cdnc=n
+
+# Set OutLevel to choose the level of output for LMDZ. 
+# OutLevel=low/medium/high
+OutLevel=low
+
+# COSP activation and choose of output frequency for COSP (monthly, daily, HF) = y/n
+LMDZ_COSP_OK=n
+LMDZ_COSP_monthly=n
+LMDZ_COSP_daily=n
+LMDZ_COSP_hf=n
+
+# Set NMC Outputs frequency (monthly, daily, HF) = y/n
+LMDZ_NMC_monthly=n
+LMDZ_NMC_daily=n
+LMDZ_NMC_hf=n
+
+
+# Nugding : ok_guide=y/n
+# If ok_guide=y, add nudging files(u.nc, v.nc, hur.nc,...) in BoundaryFiles section below.
+ok_guide=n
+
+
+[InitialStateFiles]
+# start and startphy are the clim files computed with CLIM_CREATE (create_etat0_limit) job
+List= 	($SCRATCHDIR/INIT_FILE/INCA_REPR_v2/inca_repr_restart.nc	, start.nc	) \
+	($SCRATCHDIR/INIT_FILE/startphy_nitrate.nc	, startphy.nc	)
+
+
+[BoundaryFiles]
+List=   (${R_IN}/ATM/${RESOL_ATM}/LIMIT/ERAI/leap/limit_${year}.nc , limit.nc)
+
+#	(${R_IN}/ATM/${RESOL_ATM}/NUDGE_FILES/ERAI/AN${year}/u_ecmwf_${year}${month}.nc 	, u.nc		),\
+#	(${R_IN}/ATM/${RESOL_ATM}/NUDGE_FILES/ERAI/AN${year}/v_ecmwf_${year}${month}.nc 	, v.nc		)
+ 
+ListNonDel= ()
+
+[ParametersFiles]
+List=   (${SUBMIT_DIR}/PARAM/physiq.def_${LMDZ_Physics}, physiq.def),       \
+        (${SUBMIT_DIR}/PARAM/gcm.def_${RESOL_ATM_XY}_${LMDZ_Physics},    gcm.def),          \
+        (${SUBMIT_DIR}/PARAM/vert.def_L${RESOL_ATM_Z},   vert.def),         \
+        (${MODIPSL}/modeles/LMDZ/DefLists/cosp_input_nl.txt, .),            \
+        (${MODIPSL}/modeles/LMDZ/DefLists/cosp_output_nl.txt, .),           \
+        (${SUBMIT_DIR}/PARAM/config.def_${ConfType},  config.def),          \
+        (${SUBMIT_DIR}/PARAM/guide.def, .),                                 \
+        (${SUBMIT_DIR}/PARAM/run.def, .),                                   \
+        (${SUBMIT_DIR}/PARAM/iodef.xml, . ),                                \
+	(${SUBMIT_DIR}/PARAM/traceur.def.inca_repr, traceur.def), \
+        (${MODIPSL}/modeles/LMDZ/DefLists/context_lmdz.xml, . ),            \
+        (${MODIPSL}/modeles/LMDZ/DefLists/field_def_lmdz.xml, . ),	    \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histmth_lmdz.xml, . ),   \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histmthCOSP_lmdz.xml, .),\
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histmthNMC_lmdz.xml, . ),\
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histday_lmdz.xml, . ),   \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histdayCOSP_lmdz.xml, .),\
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histdayNMC_lmdz.xml, . ),\
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histhf_lmdz.xml, . ),    \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histhfCOSP_lmdz.xml, .), \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histhfNMC_lmdz.xml, . ), \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histstn_lmdz.xml, . ),   \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histstrataer_lmdz.xml, . ),\
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histins_lmdz.xml, . ),   \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histLES_lmdz.xml, . )
+
+[RestartFiles]
+List=	(restart.nc, restart.nc, start.nc), \
+	(restartphy.nc, restartphy.nc,  startphy.nc) 
+
+[OutputText]
+List=   (physiq.def, gcm.def, vert.def, run.def, traceur.def, guide.def, config.def, used_run.def, iodef.xml, context_lmdz.xml, field_def_lmdz.xml, file_def_*lmdz.xml, debug.01, lmdz.prt, out_gcm.e.err, out_gcm.e.out)
+
+[OutputFiles]
+List=	(histmth.nc,      ${R_OUT_ATM_O_M}/${PREFIX}_1M_histmth.nc,   Post_1M_histmth   )	
+
+[Post_1M_histmth]
+Patches= ()
+GatherWithInternal = (lon, lat, presnivs, time_counter, time_centered, time_centered_bounds, aire)
+TimeSeriesVars2D = (bils, cldh, cldl, cldm, cldq, cldt, evap, flat, ftime_con, iwp, lwp, LWdnSFC, LWdnSFCclr, LWupSFCclr, LWdn200, LWdn200clr, LWup200, LWup200clr, precip, prw, pluc, psol, q2m, rh2m, sens, sicf, slp, snow, soll0, soll, sols0, sols, SWdnSFC, SWupSFC, SWup200, SWdnTOA, SWupTOA, SWdn200, SWdnSFCclr, SWupSFCclr, SWupTOAclr, t2m, t2m_max, t2m_min, taux, taux_ter, taux_sic, taux_lic, taux_oce, tauy, tauy_ter, tauy_sic, tauy_lic, tauy_oce, lat_ter, lat_sic, lat_lic, lat_oce, nettop, pbase, ptop, topl0, topl, tops0, tops, topswad, topswai, tsol, tsol_ter, tsol_lic, tsol_oce, tsol_sic , u10m, u500, v10m, v500, w500, pourc_ter, pourc_oce, pourc_sic, pourc_lic, wind10m, od550aer, od550lt1aer, absvisaer, loadoa, loadbc, loadso4, loaddust, loadss, sconcoa, sconcbc, sconcso4, sconcdust, sconcss, reffclwtop, cldncl, swtoaas_ant, swtoacs_ant, swtoacf_ant, swsrfas_ant, swsrfcs_ant, swsrfcf_ant, swtoaas_nat, swtoacs_nat, swtoacf_nat, swsrfas_nat, swsrfcs_nat, swsrfcf_nat, solswai, solswad, swtoacf_zero, swsrfcf_zero)
+ChunckJob2D = 100Y
+TimeSeriesVars3D = (OX, O3I, NOx, CH4, N2O, HNO3, NOy, H2SO4, CH2O, HNO3_g, upwd, lwcon, iwcon, lcc3dcon, lcc3dstra, temp, theta, ovap, ovapinit, geop, vitu, vitv, vitw, pres, rneb, rnebcon, rhum, mc, paprs, scdnc, ec550aer, concoa, concbc, concso4, concss, concdust, reffclws, reffclwc, tnt, dtdyn, dtphy, dtlschr, tntr, tntscpbl, tnhus, dqdyn, dqvdf, tnhusscpbl, dqphy, evu, mcd)
+ChunckJob3D = 100Y
+Seasonal=ON
Index: CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/EXPERIMENTS/LMDZORINCAREPR/COMP/orchidee.card
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/EXPERIMENTS/LMDZORINCAREPR/COMP/orchidee.card	(revision 3559)
+++ CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/EXPERIMENTS/LMDZORINCAREPR/COMP/orchidee.card	(revision 3559)
@@ -0,0 +1,59 @@
+[Compatibility]
+libIGCM=1.0
+
+[UserChoices]
+# The variable DefSuffix gives the suffix of the orchidee.def file to be used.
+# By default the file orchidee.def_Choi will be selected.
+# Sef DefSuffix=Choi (default) to activate default 2-layer Choisnel hydrology
+# Set DefSuffix=CWRR to activate 11-layer CWRR hydrology
+DefSuffix=Choi
+
+VEGET_UPDATE=1Y
+
+[InitialStateFiles]
+List=	(${R_IN}/SRF/soils_param.nc,        . ), \
+	(${R_IN}/SRF/routing.nc,            . ), \
+        (${R_IN}/SRF/albedo/alb_bg_modisopt_2D.nc, alb_bg.nc ), \
+        (${R_IN}/SRF/cartepente2d_15min.nc, .)
+
+[BoundaryFiles]
+List=(${R_IN}/SRF/PFTmap_1850to2005_AR5_LUHa.rc2/PFTmap_IPCC_${year}.nc, PFTmap.nc)
+ListNonDel= ()
+
+[SmoothFiles]
+List= ()
+
+[ParametersFiles]
+List=	(${SUBMIT_DIR}/PARAM/orchidee.def_${DefSuffix}, orchidee.def)   ,\
+	(${MODIPSL}/modeles/ORCHIDEE/src_xml/file_def_orchidee.xml, .)  ,\
+	(${MODIPSL}/modeles/ORCHIDEE/src_xml/context_orchidee.xml, .)   ,\
+	(${MODIPSL}/modeles/ORCHIDEE/src_xml/field_def_orchidee.xml, .)
+
+[RestartFiles]
+List=	(sechiba_rest_out.nc, sechiba_rest.nc, sechiba_rest_in.nc)
+
+[OutputText]
+List=   (out_orchidee, orchidee.def, used_orchidee.def, iodef.xml, context_orchidee.xml, field_def_orchidee.xml, file_def_orchidee.xml, river_desc.nc)
+
+[OutputFiles]
+List=   (sechiba_history.nc,   ${R_OUT_SRF_O_M}/${PREFIX}_1M_sechiba_history.nc, Post_1M_sechiba_history), \
+        (sechiba_out_2.nc,     ${R_OUT_SRF_O_H}/${PREFIX}_HF_sechiba_out_2.nc,   NONE)
+
+[Post_1M_sechiba_history]
+Patches = ()
+GatherWithInternal = (lon, lat, time_counter, Areas, Contfrac, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (nobiofrac, alb_nir, alb_vis, evap, fluxlat, fluxsens, netrad, qair, rain, runoff, snow, snownobio, snowf, frac_snow, subli, tair, temp_sol, tsol_max, tsol_min, drainage,mrsos, mrso, mrros, mrro, prveg, evspsblveg, evspsblsoi, tran, treeFrac, grassFrac, cropFrac, baresoilFrac, residualFrac, TWBR, riverflow, coastalflow, DelSoilMoist_daily, DelIntercept_daily, DelSWE_daily, delstock_routing, snowmelt, LAImean)
+ChunckJob2D = NONE
+TimeSeriesVars3D = (lai, maxvegetfrac, vegetfrac, ptn, nee)
+ChunckJob3D = NONE
+Seasonal = ON
+
+[Post_HF_sechiba_out_2]
+Patches = ()
+GatherWithInternal = (lon, lat, time_counter, Areas, Contfrac, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (mrsos, mrro)
+ChunckJob2D = 50Y
+TimeSeriesVars3D = (ptn)
+ChunckJob3D = 10Y
+Seasonal = OFF
+
Index: CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/EXPERIMENTS/LMDZORINCAREPR/COMP/reprobus.card
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/EXPERIMENTS/LMDZORINCAREPR/COMP/reprobus.card	(revision 3559)
+++ CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/EXPERIMENTS/LMDZORINCAREPR/COMP/reprobus.card	(revision 3559)
@@ -0,0 +1,43 @@
+[Compatibility]
+libIGCM=1.0
+
+[UserChoices]
+
+[InitialStateFiles]
+List= ()
+
+[BoundaryFiles]
+#    yyyymm_p1 yyyymm_m1, month_p1 et month_m1 sont accesible dans un version modifie de libIGCM/trunk
+# /ccc/work/cont003/gen6178/marchand/INPUT/MODELE_2D
+#  /ccc/work/cont003/gen6178/marchand/INPUT/TOMCAT_3D
+#   /ccc/work/cont003/gen6178/marchand/INPUT/SOLAR/jstrato/
+List=(/ccc/work/cont003/gen6178/marchand/INPUT/MODELE_2D/REF1/AERO/aer_2D-${yyyymm_m1}15.nc, aerm.nc),\
+     (/ccc/work/cont003/gen6178/marchand/INPUT/MODELE_2D/REF1/AERO/aer_2D-${year}${month}15.nc, aer.nc),\
+     (/ccc/work/cont003/gen6178/marchand/INPUT/MODELE_2D/REF1/AERO/aer_2D-${yyyymm_p1}15.nc, aerp.nc),\
+     (/ccc/work/cont003/gen6178/marchand/INPUT/MODELE_2D/REF2/FORC/forc_2D-${yyyymm_m1}15.nc, forcm.nc),\
+     (/ccc/work/cont003/gen6178/marchand/INPUT/MODELE_2D/REF2/FORC/forc_2D-${year}${month}15.nc, forc.nc),\
+     (/ccc/work/cont003/gen6178/marchand/INPUT/MODELE_2D/REF2/FORC/forc_2D-${yyyymm_p1}15.nc, forcp.nc),\
+     (/ccc/work/cont003/gen6178/marchand/INPUT/TOMCAT_3D/tom_3D-1995${month_m1}.nc, tomm.nc),\
+     (/ccc/work/cont003/gen6178/marchand/INPUT/TOMCAT_3D/tom_3D-1995${month}.nc, tom.nc),\
+     (/ccc/work/cont003/gen6178/marchand/INPUT/TOMCAT_3D/tom_3D-1995${month_p1}.nc, tomp.nc),\
+     (/ccc/work/cont003/gen6178/marchand/INPUT/SOLAR/jstrato/${year}/jstrato.${year}${month}, jstrato)
+
+ListNonDel=(/ccc/work/cont003/gen6178/marchand/INPUT/SOLAR/SolarFlux-1950-2006.nc, SolarFlux.nc),\
+           (/ccc/work/cont003/gen6178/marchand/INPUT/GHG_ODS/CCMVal/ghg_ref1-1850-2006.nc, ghg-ccmval.nc),\
+           (/ccc/work/cont003/gen6178/marchand/INPUT/GHG_ODS/CCMVal/ods_2007-1951-2100.nc, ods-ccmval.nc)
+           
+
+[SmoothFiles]
+List= ()
+
+[ParametersFiles]
+List= (${SUBMIT_DIR}/PARAM/reprobus.def, .)
+
+[RestartFiles]
+List= ( NONE )
+
+[OutputText]
+List= (reprobus.def)
+
+[OutputFiles]
+List= ()
Index: CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/EXPERIMENTS/LMDZORINCAREPR/COMP/stomate.card
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/EXPERIMENTS/LMDZORINCAREPR/COMP/stomate.card	(revision 3559)
+++ CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/EXPERIMENTS/LMDZORINCAREPR/COMP/stomate.card	(revision 3559)
@@ -0,0 +1,45 @@
+[Compatibility]
+libIGCM=1.0
+
+[UserChoices]
+
+[InitialStateFiles]
+List=   ()
+
+[BoundaryFiles]
+List=	()
+ListNonDel= ()
+
+[SmoothFiles]
+List=	()
+
+[ParametersFiles]
+List=   ()
+
+[RestartFiles]
+List=	(stomate_rest_out.nc, stomate_rest.nc, stomate_rest_in.nc)
+
+[OutputText]
+List=   ()
+
+[OutputFiles]
+List=   (stomate_history.nc,      ${R_OUT_SBG_O_M}/${PREFIX}_1M_stomate_history.nc,      Post_1M_stomate_history),    \
+        (stomate_ipcc_history.nc, ${R_OUT_SBG_O_M}/${PREFIX}_1M_stomate_ipcc_history.nc, Post_1M_stomate_ipcc_history)
+
+[Post_1M_stomate_history]
+Patches= ()
+GatherWithInternal= (lon, lat, time_counter, time_counter_bounds, Areas)
+TimeSeriesVars2D= (T2M_MONTH,CONTFRAC,RESOLUTION_X,RESOLUTION_Y,CONVFLUX,CFLUX_PROD10,CFLUX_PROD100,HARVEST_ABOVE)
+ChunckJob2D = NONE
+TimeSeriesVars3D = (CO2FLUX,LAI,VEGET_MAX,NPP,GPP,HET_RESP,MAINT_RESP,GROWTH_RESP,AGE,HEIGHT,TOTAL_M,TOTAL_BM_LITTER,TOTAL_SOIL_CARB,CO2_FIRE)
+ChunckJob3D = NONE
+Seasonal=ON
+
+[Post_1M_stomate_ipcc_history]
+Patches= ()
+GatherWithInternal= (lon, lat, time_counter, time_counter_bounds, Areas, CONTFRAC)
+TimeSeriesVars2D=(cVeg, cLitter, cSoil, cProduct, lai, gpp, ra, npp, rh, fFire, fHarvest, fLuc, nbp, fVegLitter, fLitterSoil, cLeaf, cWood, cRoot, cMisc, cLitterAbove, cLitterBelow, cSoilFast, cSoilMedium, cSoilSlow, landCoverFrac, treeFracPrimDec, treeFracPrimEver, c3PftFrac, c4PftFrac, rGrowth, rMaint, nppLeaf, nppWood, nppRoot, nep)
+ChunckJob2D = NONE
+TimeSeriesVars3D=()
+ChunckJob3D = NONE
+Seasonal=ON
Index: CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/EXPERIMENTS/LMDZORINCAREPR/COMP/xios.card
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/EXPERIMENTS/LMDZORINCAREPR/COMP/xios.card	(revision 3559)
+++ CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/EXPERIMENTS/LMDZORINCAREPR/COMP/xios.card	(revision 3559)
@@ -0,0 +1,29 @@
+[Compatibility]
+libIGCM=1.0
+
+[UserChoices]
+
+[InitialStateFiles]
+List=	()
+
+[BoundaryFiles]
+List=	()
+ListNonDel= ()
+
+[SmoothFiles]
+List=	()
+
+[ParametersFiles]
+List=	()
+
+[RestartFiles]
+List=	(NONE)
+
+[OutputText]
+List=   (xios_client_*,out_xios.x.err.*, out_xios.x.out.*)
+
+[OutputFiles]
+List=   ()
+
+
+
Index: CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/EXPERIMENTS/LMDZORINCAREPR/config.card
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/EXPERIMENTS/LMDZORINCAREPR/config.card	(revision 3559)
+++ CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/EXPERIMENTS/LMDZORINCAREPR/config.card	(revision 3559)
@@ -0,0 +1,159 @@
+#- $Id: config.card 69 2007-06-21 14:08:22Z acosce $
+#========================================================================
+#D-- Carte pour run AR5WERF -- 
+#D-- Les fichiers sflx - aircraft - start - startphy créés par S. Szopa
+#D--
+#========================================================================
+#D-- Compatibility -
+[Compatibility]
+libIGCM=1.0
+#========================================================================
+#D-- UserChoices -
+[UserChoices]
+#============================
+#D-- (<8 chars MAX for JobName)
+JobName=LOIR.01
+SpaceName=TEST
+ExperimentName=NMHC
+LongName='nouvelles configs + LMDZ5 INCA5 39 + Xios + possibilite nouvelle physique '
+TagName=LMDZORINCAREPR
+#D- Choice of experiment in EXPERIEMENTS directory
+ExpType=LMDZORINCAREPR
+#============================
+#D-- leap, noleap, 360d
+CalendarType=leap
+#D-- Début et fin de Job
+#D-- "YYYY-MM-DD"
+DateBegin=2006-01-01
+DateEnd=2006-01-01
+#============================
+#D-- 1Y, 1M, 5D, 1D
+PeriodLength=1D
+#============================
+#D-- ListOfComponents -
+[ListOfComponents]
+#D- For each component, Name of component, Tag of component
+ATM= (lmdz, LMDZ5)
+#SRF= (orchidee, orchidee_1_9_5)
+#SBG= (stomate, ORCHIDEE_1_9_5)
+CHT= (inca, INCA5) 
+CHS= (reprobus, REPROBUS) 
+IOS= (xios, XIOS)
+
+#========================================================================
+#D-- Executable -
+[Executable]
+Name=gcm.e
+#D- For each component, Real name of executable, Name of executable for oasis
+ATM= (gcm.e, gcm.e, 32MPI, 1OMP)
+#SRF= ("", "")
+#SBG= ("", "")
+CHT= ("", "")
+CHS= ("", "")
+IOS= (xios_server.exe, xios.x, 1MPI)
+
+#========================================================================
+#D-- Restarts -
+[Restarts]
+#D- If you want a GENERAL RULE FOR RESTARTS, put this flag to 'y'
+OverRule=n
+#D- Last day of the experience used as restart
+RestartDate=2005-12-31
+#D- Define restart simulation name (=> JOB_OS)
+RestartJobName=LOI_AR5WERF_E0_2006
+#D- Path Server Group Login (=> PSGL)
+RestartPath=/ccc/work/cont003/dsm/p24cozic/INPUT_INCA/IGCM_OUT/LMDZORINCA/NMHC_AER
+# Attention login depend de la machine
+
+#========================================================================
+#D-- Post -
+[Post]
+#D- Do we rebuild parallel output, this flag determines
+#D- frequency of rebuild submission
+RebuildFrequency=NONE
+#D- Do we pack restart and debug txt files, this flag determines
+#D- frequency of pack submission (use NONE for DRYRUN=3)
+PackFrequency=1Y
+#D- If you want to produce time series, this flag determines
+#D- frequency of post-processing submission
+TimeSeriesFrequency=NONE
+#D- If you want to produce seasonal average, this flag determines
+#D- the period of this average
+SeasonalFrequency=NONE
+#D- Offset for seasonal average first start dates ; same unit as SeasonalFrequency
+#D- Usefull if you do not want to consider the first X simulation s years
+SeasonalFrequencyOffset=0
+
+#========================================================================
+#D-- ATM -
+[ATM]
+#
+WriteFrequency="1M 1D HF"
+# If config_Restarts_OverRule == 'n' all params are read
+Restart= n
+# Last day of the experience used as restart
+RestartDate=2000-01-01
+# Define restart simulation name
+RestartJobName=JobName
+RestartPath=${ARCHIVE}/IGCM_OUT/LMDZORINCA/NMHC_AER
+
+#========================================================================
+#D-- SRF -
+[SRF]
+WriteFrequency="1M"
+Restart=n
+##-- Last day of the experience used as restart
+RestartDate=1999-12-30
+# Define restart simulation name
+RestartJobName=JobName
+RestartPath=${ARCHIVE}/IGCM_OUT/LMDZORINCA/NMHC_AER
+
+#========================================================================
+#D-- SBG - STOMATE
+[SBG]
+WriteFrequency="1M"
+# If config_Restarts_OverRule == 'n' next 4 params are read
+Restart=n
+#-- Last day of the experience used as restart for this component if Restart=y
+RestartDate=2000-01-31
+# Define restart simulation name for this component
+RestartJobName=EXP00
+RestartPath=${ARCHIVE}/IGCM_OUT/LMDZOR/DEVT/amip
+
+#========================================================================
+#D-- CHT -
+[CHT]
+#D-- choose inca writefrequency between 1D or 1M. it is not possible to cumulate both of them
+#D-- you can also manage the writefrequency in INCA/src/INCA_XML/file_*.xml files
+WriteFrequency="1D"
+Restart=n
+#D-- Last day of the experience used as restart
+RestartDate=2000-01-01
+#D-- Define restart simulation name
+RestartJobName=JobName
+RestartPath=${ARCHIVE}/IGCM_OUT/LMDZORINCA/NMHC_AER
+
+#========================================================================
+#D-- CHS -
+[CHS]
+WriteFrequency="1D"
+Restart=n
+#D-- Last day of the experience used as restart
+RestartDate=2000-01-01
+#D-- Define restart simulation name
+RestartJobName=JobName
+RestartPath=${ARCHIVE}/IGCM_OUT/LMDZORINCA/NMHC_AER
+
+#========================================================================
+#D-- IOS -
+[IOS]
+WriteFrequency=""
+# If config_Restarts_OverRule == 'n' next 4 params are read
+Restart= n
+##-- Last day of the experience used as restart for this component if Restart=y
+RestartDate=
+# Define restart simulation name for this component
+RestartJobName=
+RestartPath=
+
+#========================================================================
Index: CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/EXPERIMENTS/LMDZREPR/COMP/lmdz.card
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/EXPERIMENTS/LMDZREPR/COMP/lmdz.card	(revision 3559)
+++ CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/EXPERIMENTS/LMDZREPR/COMP/lmdz.card	(revision 3559)
@@ -0,0 +1,118 @@
+#- $Id: lmdz.card 70 2007-06-21 14:20:42Z acosce $
+[Compatibility]
+libIGCM=1.0
+
+[UserChoices]
+# Physics package to use :
+# LMDZ_Physics=AP for standard/old physics(defalut), can be used with LMDZ4_AR5 or LMDZ5/trunk sources
+# LMDZ_Physics=NPv3.2 for new physics, to be used with LMDZ5/trunk revision 1554 or later
+# LMDZ_Physics=NPv5.4 for new physics to be used with LMDZ5/trunk revision 2449 or later
+# LMDZ_Physics=NPv5.67 for new physics to be used with LMDZ5/testing revision 2546 or later
+# LMDZ_Physics=NPv5.70 for new physics to be used with LMDZ5/testing revision 2595 or later
+LMDZ_Physics=AP
+
+# Use XIOS as output library
+XIOS=y
+
+# Set the variable CREATE needed further below to find the initial and boundary condition files.
+CREATE=ELC-${RESOL_ATM_3D}
+
+# ByPass_hgardfou_teta=y : modify teta_ parameters for following CumulPeriod only
+ByPass_hgardfou_teta=n
+
+# ByPass_hgardfou_mats=y : set parameter purmats=y for following CumulPeriod only
+ByPass_hgardfou_mats=n
+
+# Set ConfType to choose parameters for aerosols, solar and green house gazes. 
+# The parameter file PARAM/config.def_$ConfType will be used.
+# ConfType=preind/actuel/annuel
+ConfType=actuel
+
+# manage radiative aerosol effect and ozone 
+flag_aerosol=0
+ok_ade=n
+ok_aie=n
+aerosol_couple=n
+read_climoz=0
+ok_cdnc=n
+
+# Set OutLevel to choose the level of output for LMDZ. 
+# OutLevel=low/medium/high
+OutLevel=low
+
+# COSP activation and choose of output frequency for COSP (monthly, daily, HF) = y/n
+LMDZ_COSP_OK=n
+LMDZ_COSP_monthly=n
+LMDZ_COSP_daily=n
+LMDZ_COSP_hf=n
+
+# Set NMC Outputs frequency (monthly, daily, HF) = y/n
+LMDZ_NMC_monthly=n
+LMDZ_NMC_daily=n
+LMDZ_NMC_hf=n
+
+
+# Nugding : ok_guide=y/n
+# If ok_guide=y, add nudging files(u.nc, v.nc, hur.nc,...) in BoundaryFiles section below.
+ok_guide=n
+
+
+[InitialStateFiles]
+# start and startphy are the clim files computed with CLIM_CREATE (create_etat0_limit) job
+List= 	($SCRATCHDIR/INIT_FILE/INCA_REPR_v2/inca_repr_restart.nc	, start.nc	) \
+	($SCRATCHDIR/INIT_FILE/startphy_nitrate.nc	, startphy.nc	)
+
+
+[BoundaryFiles]
+List=   (${R_IN}/ATM/${RESOL_ATM}/LIMIT/ERAI/leap/limit_${year}.nc , limit.nc)
+
+#	(${R_IN}/ATM/${RESOL_ATM}/NUDGE_FILES/ERAI/AN${year}/u_ecmwf_${year}${month}.nc 	, u.nc		),\
+#	(${R_IN}/ATM/${RESOL_ATM}/NUDGE_FILES/ERAI/AN${year}/v_ecmwf_${year}${month}.nc 	, v.nc		)
+ 
+ListNonDel= ()
+
+[ParametersFiles]
+List=   (${SUBMIT_DIR}/PARAM/physiq.def_${LMDZ_Physics}, physiq.def),       \
+        (${SUBMIT_DIR}/PARAM/gcm.def_${RESOL_ATM_XY}_${LMDZ_Physics},    gcm.def),          \
+        (${SUBMIT_DIR}/PARAM/vert.def_L${RESOL_ATM_Z},   vert.def),         \
+        (${MODIPSL}/modeles/LMDZ/DefLists/cosp_input_nl.txt, .),            \
+        (${MODIPSL}/modeles/LMDZ/DefLists/cosp_output_nl.txt, .),           \
+        (${SUBMIT_DIR}/PARAM/config.def_${ConfType},  config.def),          \
+        (${SUBMIT_DIR}/PARAM/guide.def, .),                                 \
+        (${SUBMIT_DIR}/PARAM/run.def, .),                                   \
+        (${SUBMIT_DIR}/PARAM/iodef.xml, . ),                                \
+	(${SUBMIT_DIR}/PARAM/traceur.def.repr, traceur.def), \
+        (${MODIPSL}/modeles/LMDZ/DefLists/context_lmdz.xml, . ),            \
+        (${MODIPSL}/modeles/LMDZ/DefLists/field_def_lmdz.xml, . ),	    \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histmth_lmdz.xml, . ),   \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histmthCOSP_lmdz.xml, .),\
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histmthNMC_lmdz.xml, . ),\
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histday_lmdz.xml, . ),   \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histdayCOSP_lmdz.xml, .),\
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histdayNMC_lmdz.xml, . ),\
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histhf_lmdz.xml, . ),    \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histhfCOSP_lmdz.xml, .), \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histhfNMC_lmdz.xml, . ), \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histstn_lmdz.xml, . ),   \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histstrataer_lmdz.xml, . ),\
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histins_lmdz.xml, . ),   \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histLES_lmdz.xml, . )
+
+[RestartFiles]
+List=	(restart.nc, restart.nc, start.nc), \
+	(restartphy.nc, restartphy.nc,  startphy.nc) 
+
+[OutputText]
+List=   (physiq.def, gcm.def, vert.def, run.def, traceur.def, guide.def, config.def, used_run.def, iodef.xml, context_lmdz.xml, field_def_lmdz.xml, file_def_*lmdz.xml, debug.01, lmdz.prt, out_gcm.e.err, out_gcm.e.out)
+
+[OutputFiles]
+List=	(histmth.nc,      ${R_OUT_ATM_O_M}/${PREFIX}_1M_histmth.nc,   Post_1M_histmth   )	
+
+[Post_1M_histmth]
+Patches= ()
+GatherWithInternal = (lon, lat, presnivs, time_counter, time_centered, time_centered_bounds, aire)
+TimeSeriesVars2D = (bils, cldh, cldl, cldm, cldq, cldt, evap, flat, ftime_con, iwp, lwp, LWdnSFC, LWdnSFCclr, LWupSFCclr, LWdn200, LWdn200clr, LWup200, LWup200clr, precip, prw, pluc, psol, q2m, rh2m, sens, sicf, slp, snow, soll0, soll, sols0, sols, SWdnSFC, SWupSFC, SWup200, SWdnTOA, SWupTOA, SWdn200, SWdnSFCclr, SWupSFCclr, SWupTOAclr, t2m, t2m_max, t2m_min, taux, taux_ter, taux_sic, taux_lic, taux_oce, tauy, tauy_ter, tauy_sic, tauy_lic, tauy_oce, lat_ter, lat_sic, lat_lic, lat_oce, nettop, pbase, ptop, topl0, topl, tops0, tops, topswad, topswai, tsol, tsol_ter, tsol_lic, tsol_oce, tsol_sic , u10m, u500, v10m, v500, w500, pourc_ter, pourc_oce, pourc_sic, pourc_lic, wind10m, od550aer, od550lt1aer, absvisaer, loadoa, loadbc, loadso4, loaddust, loadss, sconcoa, sconcbc, sconcso4, sconcdust, sconcss, reffclwtop, cldncl, swtoaas_ant, swtoacs_ant, swtoacf_ant, swsrfas_ant, swsrfcs_ant, swsrfcf_ant, swtoaas_nat, swtoacs_nat, swtoacf_nat, swsrfas_nat, swsrfcs_nat, swsrfcf_nat, solswai, solswad, swtoacf_zero, swsrfcf_zero)
+ChunckJob2D = 100Y
+TimeSeriesVars3D = (OX, O3I, NOx, CH4, N2O, HNO3, NOy, H2SO4, CH2O, HNO3_g, upwd, lwcon, iwcon, lcc3dcon, lcc3dstra, temp, theta, ovap, ovapinit, geop, vitu, vitv, vitw, pres, rneb, rnebcon, rhum, mc, paprs, scdnc, ec550aer, concoa, concbc, concso4, concss, concdust, reffclws, reffclwc, tnt, dtdyn, dtphy, dtlschr, tntr, tntscpbl, tnhus, dqdyn, dqvdf, tnhusscpbl, dqphy, evu, mcd)
+ChunckJob3D = 100Y
+Seasonal=ON
Index: CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/EXPERIMENTS/LMDZREPR/COMP/orchidee.card
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/EXPERIMENTS/LMDZREPR/COMP/orchidee.card	(revision 3559)
+++ CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/EXPERIMENTS/LMDZREPR/COMP/orchidee.card	(revision 3559)
@@ -0,0 +1,59 @@
+[Compatibility]
+libIGCM=1.0
+
+[UserChoices]
+# The variable DefSuffix gives the suffix of the orchidee.def file to be used.
+# By default the file orchidee.def_Choi will be selected.
+# Sef DefSuffix=Choi (default) to activate default 2-layer Choisnel hydrology
+# Set DefSuffix=CWRR to activate 11-layer CWRR hydrology
+DefSuffix=Choi
+
+VEGET_UPDATE=1Y
+
+[InitialStateFiles]
+List=	(${R_IN}/SRF/soils_param.nc,        . ), \
+	(${R_IN}/SRF/routing.nc,            . ), \
+        (${R_IN}/SRF/albedo/alb_bg_modisopt_2D.nc, alb_bg.nc ), \
+        (${R_IN}/SRF/cartepente2d_15min.nc, .)
+
+[BoundaryFiles]
+List=(${R_IN}/SRF/PFTmap_1850to2005_AR5_LUHa.rc2/PFTmap_IPCC_${year}.nc, PFTmap.nc)
+ListNonDel= ()
+
+[SmoothFiles]
+List= ()
+
+[ParametersFiles]
+List=	(${SUBMIT_DIR}/PARAM/orchidee.def_${DefSuffix}, orchidee.def)   ,\
+	(${MODIPSL}/modeles/ORCHIDEE/src_xml/file_def_orchidee.xml, .)  ,\
+	(${MODIPSL}/modeles/ORCHIDEE/src_xml/context_orchidee.xml, .)   ,\
+	(${MODIPSL}/modeles/ORCHIDEE/src_xml/field_def_orchidee.xml, .)
+
+[RestartFiles]
+List=	(sechiba_rest_out.nc, sechiba_rest.nc, sechiba_rest_in.nc)
+
+[OutputText]
+List=   (out_orchidee, orchidee.def, used_orchidee.def, iodef.xml, context_orchidee.xml, field_def_orchidee.xml, file_def_orchidee.xml, river_desc.nc)
+
+[OutputFiles]
+List=   (sechiba_history.nc,   ${R_OUT_SRF_O_M}/${PREFIX}_1M_sechiba_history.nc, Post_1M_sechiba_history), \
+        (sechiba_out_2.nc,     ${R_OUT_SRF_O_H}/${PREFIX}_HF_sechiba_out_2.nc,   NONE)
+
+[Post_1M_sechiba_history]
+Patches = ()
+GatherWithInternal = (lon, lat, time_counter, Areas, Contfrac, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (nobiofrac, alb_nir, alb_vis, evap, fluxlat, fluxsens, netrad, qair, rain, runoff, snow, snownobio, snowf, frac_snow, subli, tair, temp_sol, tsol_max, tsol_min, drainage,mrsos, mrso, mrros, mrro, prveg, evspsblveg, evspsblsoi, tran, treeFrac, grassFrac, cropFrac, baresoilFrac, residualFrac, TWBR, riverflow, coastalflow, DelSoilMoist_daily, DelIntercept_daily, DelSWE_daily, delstock_routing, snowmelt, LAImean)
+ChunckJob2D = NONE
+TimeSeriesVars3D = (lai, maxvegetfrac, vegetfrac, ptn, nee)
+ChunckJob3D = NONE
+Seasonal = ON
+
+[Post_HF_sechiba_out_2]
+Patches = ()
+GatherWithInternal = (lon, lat, time_counter, Areas, Contfrac, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (mrsos, mrro)
+ChunckJob2D = 50Y
+TimeSeriesVars3D = (ptn)
+ChunckJob3D = 10Y
+Seasonal = OFF
+
Index: CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/EXPERIMENTS/LMDZREPR/COMP/reprobus.card
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/EXPERIMENTS/LMDZREPR/COMP/reprobus.card	(revision 3559)
+++ CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/EXPERIMENTS/LMDZREPR/COMP/reprobus.card	(revision 3559)
@@ -0,0 +1,43 @@
+[Compatibility]
+libIGCM=1.0
+
+[UserChoices]
+
+[InitialStateFiles]
+List= ()
+
+[BoundaryFiles]
+#    yyyymm_p1 yyyymm_m1, month_p1 et month_m1 sont accesible dans un version modifie de libIGCM/trunk
+# /ccc/work/cont003/gen6178/marchand/INPUT/MODELE_2D
+#  /ccc/work/cont003/gen6178/marchand/INPUT/TOMCAT_3D
+#   /ccc/work/cont003/gen6178/marchand/INPUT/SOLAR/jstrato/
+List=(/ccc/work/cont003/gen6178/marchand/INPUT/MODELE_2D/REF1/AERO/aer_2D-${yyyymm_m1}15.nc, aerm.nc),\
+     (/ccc/work/cont003/gen6178/marchand/INPUT/MODELE_2D/REF1/AERO/aer_2D-${year}${month}15.nc, aer.nc),\
+     (/ccc/work/cont003/gen6178/marchand/INPUT/MODELE_2D/REF1/AERO/aer_2D-${yyyymm_p1}15.nc, aerp.nc),\
+     (/ccc/work/cont003/gen6178/marchand/INPUT/MODELE_2D/REF2/FORC/forc_2D-${yyyymm_m1}15.nc, forcm.nc),\
+     (/ccc/work/cont003/gen6178/marchand/INPUT/MODELE_2D/REF2/FORC/forc_2D-${year}${month}15.nc, forc.nc),\
+     (/ccc/work/cont003/gen6178/marchand/INPUT/MODELE_2D/REF2/FORC/forc_2D-${yyyymm_p1}15.nc, forcp.nc),\
+     (/ccc/work/cont003/gen6178/marchand/INPUT/TOMCAT_3D/tom_3D-1995${month_m1}.nc, tomm.nc),\
+     (/ccc/work/cont003/gen6178/marchand/INPUT/TOMCAT_3D/tom_3D-1995${month}.nc, tom.nc),\
+     (/ccc/work/cont003/gen6178/marchand/INPUT/TOMCAT_3D/tom_3D-1995${month_p1}.nc, tomp.nc),\
+     (/ccc/work/cont003/gen6178/marchand/INPUT/SOLAR/jstrato/${year}/jstrato.${year}${month}, jstrato)
+
+ListNonDel=(/ccc/work/cont003/gen6178/marchand/INPUT/SOLAR/SolarFlux-1950-2006.nc, SolarFlux.nc),\
+           (/ccc/work/cont003/gen6178/marchand/INPUT/GHG_ODS/CCMVal/ghg_ref1-1850-2006.nc, ghg-ccmval.nc),\
+           (/ccc/work/cont003/gen6178/marchand/INPUT/GHG_ODS/CCMVal/ods_2007-1951-2100.nc, ods-ccmval.nc)
+           
+
+[SmoothFiles]
+List= ()
+
+[ParametersFiles]
+List= (${SUBMIT_DIR}/PARAM/reprobus.def, .)
+
+[RestartFiles]
+List= ( NONE )
+
+[OutputText]
+List= (reprobus.def)
+
+[OutputFiles]
+List= ()
Index: CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/EXPERIMENTS/LMDZREPR/COMP/stomate.card
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/EXPERIMENTS/LMDZREPR/COMP/stomate.card	(revision 3559)
+++ CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/EXPERIMENTS/LMDZREPR/COMP/stomate.card	(revision 3559)
@@ -0,0 +1,45 @@
+[Compatibility]
+libIGCM=1.0
+
+[UserChoices]
+
+[InitialStateFiles]
+List=   ()
+
+[BoundaryFiles]
+List=	()
+ListNonDel= ()
+
+[SmoothFiles]
+List=	()
+
+[ParametersFiles]
+List=   ()
+
+[RestartFiles]
+List=	(stomate_rest_out.nc, stomate_rest.nc, stomate_rest_in.nc)
+
+[OutputText]
+List=   ()
+
+[OutputFiles]
+List=   (stomate_history.nc,      ${R_OUT_SBG_O_M}/${PREFIX}_1M_stomate_history.nc,      Post_1M_stomate_history),    \
+        (stomate_ipcc_history.nc, ${R_OUT_SBG_O_M}/${PREFIX}_1M_stomate_ipcc_history.nc, Post_1M_stomate_ipcc_history)
+
+[Post_1M_stomate_history]
+Patches= ()
+GatherWithInternal= (lon, lat, time_counter, time_counter_bounds, Areas)
+TimeSeriesVars2D= (T2M_MONTH,CONTFRAC,RESOLUTION_X,RESOLUTION_Y,CONVFLUX,CFLUX_PROD10,CFLUX_PROD100,HARVEST_ABOVE)
+ChunckJob2D = NONE
+TimeSeriesVars3D = (CO2FLUX,LAI,VEGET_MAX,NPP,GPP,HET_RESP,MAINT_RESP,GROWTH_RESP,AGE,HEIGHT,TOTAL_M,TOTAL_BM_LITTER,TOTAL_SOIL_CARB,CO2_FIRE)
+ChunckJob3D = NONE
+Seasonal=ON
+
+[Post_1M_stomate_ipcc_history]
+Patches= ()
+GatherWithInternal= (lon, lat, time_counter, time_counter_bounds, Areas, CONTFRAC)
+TimeSeriesVars2D=(cVeg, cLitter, cSoil, cProduct, lai, gpp, ra, npp, rh, fFire, fHarvest, fLuc, nbp, fVegLitter, fLitterSoil, cLeaf, cWood, cRoot, cMisc, cLitterAbove, cLitterBelow, cSoilFast, cSoilMedium, cSoilSlow, landCoverFrac, treeFracPrimDec, treeFracPrimEver, c3PftFrac, c4PftFrac, rGrowth, rMaint, nppLeaf, nppWood, nppRoot, nep)
+ChunckJob2D = NONE
+TimeSeriesVars3D=()
+ChunckJob3D = NONE
+Seasonal=ON
Index: CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/EXPERIMENTS/LMDZREPR/COMP/xios.card
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/EXPERIMENTS/LMDZREPR/COMP/xios.card	(revision 3559)
+++ CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/EXPERIMENTS/LMDZREPR/COMP/xios.card	(revision 3559)
@@ -0,0 +1,29 @@
+[Compatibility]
+libIGCM=1.0
+
+[UserChoices]
+
+[InitialStateFiles]
+List=	()
+
+[BoundaryFiles]
+List=	()
+ListNonDel= ()
+
+[SmoothFiles]
+List=	()
+
+[ParametersFiles]
+List=	()
+
+[RestartFiles]
+List=	(NONE)
+
+[OutputText]
+List=   (xios_client_*,out_xios.x.err.*, out_xios.x.out.*)
+
+[OutputFiles]
+List=   ()
+
+
+
Index: CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/EXPERIMENTS/LMDZREPR/config.card
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/EXPERIMENTS/LMDZREPR/config.card	(revision 3559)
+++ CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/EXPERIMENTS/LMDZREPR/config.card	(revision 3559)
@@ -0,0 +1,117 @@
+#- $Id: config.card 69 2007-06-21 14:08:22Z acosce $
+#========================================================================
+#D-- Carte pour run AR5WERF -- 
+#D-- Les fichiers sflx - aircraft - start - startphy créés par S. Szopa
+#D--
+#========================================================================
+#D-- Compatibility -
+[Compatibility]
+libIGCM=1.0
+#========================================================================
+#D-- UserChoices -
+[UserChoices]
+#============================
+#D-- (<8 chars MAX for JobName)
+JobName=LR.01
+SpaceName=TEST
+ExperimentName=REF
+LongName='nouvelles configs + LMDZ5 INCA5 39 + Xios + possibilite nouvelle physique '
+TagName=LMDZREPR
+#D- Choice of experiment in EXPERIEMENTS directory
+ExpType=LMDZREPR
+#============================
+#D-- leap, noleap, 360d
+CalendarType=leap
+#D-- Début et fin de Job
+#D-- "YYYY-MM-DD"
+DateBegin=2006-01-01
+DateEnd=2006-01-01
+#============================
+#D-- 1Y, 1M, 5D, 1D
+PeriodLength=1D
+#============================
+#D-- ListOfComponents -
+[ListOfComponents]
+#D- For each component, Name of component, Tag of component
+ATM= (lmdz, LMDZ5)
+CHS= (reprobus, REPROBUS) 
+IOS= (xios, XIOS)
+
+#========================================================================
+#D-- Executable -
+[Executable]
+Name=gcm.e
+#D- For each component, Real name of executable, Name of executable for oasis
+ATM= (gcm.e, gcm.e, 32MPI, 1OMP)
+CHS= ("", "")
+IOS= (xios_server.exe, xios.x, 1MPI)
+
+#========================================================================
+#D-- Restarts -
+[Restarts]
+#D- If you want a GENERAL RULE FOR RESTARTS, put this flag to 'y'
+OverRule=n
+#D- Last day of the experience used as restart
+RestartDate=2005-12-31
+#D- Define restart simulation name (=> JOB_OS)
+RestartJobName=LOI_AR5WERF_E0_2006
+#D- Path Server Group Login (=> PSGL)
+RestartPath=/ccc/work/cont003/dsm/p24cozic/INPUT_INCA/IGCM_OUT/LMDZORINCA/NMHC_AER
+# Attention login depend de la machine
+
+#========================================================================
+#D-- Post -
+[Post]
+#D- Do we rebuild parallel output, this flag determines
+#D- frequency of rebuild submission
+RebuildFrequency=NONE
+#D- Do we pack restart and debug txt files, this flag determines
+#D- frequency of pack submission (use NONE for DRYRUN=3)
+PackFrequency=1Y
+#D- If you want to produce time series, this flag determines
+#D- frequency of post-processing submission
+TimeSeriesFrequency=NONE
+#D- If you want to produce seasonal average, this flag determines
+#D- the period of this average
+SeasonalFrequency=NONE
+#D- Offset for seasonal average first start dates ; same unit as SeasonalFrequency
+#D- Usefull if you do not want to consider the first X simulation s years
+SeasonalFrequencyOffset=0
+
+#========================================================================
+#D-- ATM -
+[ATM]
+#
+WriteFrequency="1M 1D HF"
+# If config_Restarts_OverRule == 'n' all params are read
+Restart= n
+# Last day of the experience used as restart
+RestartDate=2000-01-01
+# Define restart simulation name
+RestartJobName=JobName
+RestartPath=${ARCHIVE}/IGCM_OUT/LMDZORINCA/NMHC_AER
+
+#========================================================================
+#D-- CHS -
+[CHS]
+WriteFrequency="1D"
+Restart=n
+#D-- Last day of the experience used as restart
+RestartDate=2000-01-01
+#D-- Define restart simulation name
+RestartJobName=JobName
+RestartPath=${ARCHIVE}/IGCM_OUT/LMDZORINCA/NMHC_AER
+
+#========================================================================
+#D-- IOS -
+[IOS]
+WriteFrequency=""
+# If config_Restarts_OverRule == 'n' next 4 params are read
+Restart= n
+##-- Last day of the experience used as restart for this component if Restart=y
+RestartDate=
+# Define restart simulation name for this component
+RestartJobName=
+RestartPath=
+
+#========================================================================
Index: CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/DRIVER/inca.driver
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/DRIVER/inca.driver	(revision 3559)
+++ CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/DRIVER/inca.driver	(revision 3559)
@@ -0,0 +1,231 @@
+#!/bin/ksh
+
+#D- Driver du script pour INCA
+#-----------------------------------------------------------------
+function INCA_sed_replace
+{
+    IGCM_debug_PushStack "INCA_sed_replace"
+
+    sed -e "s/${2}/${3}/" ${1} > ${1}.tmp
+    RET=$?
+    echo "INCA_sed : ${1} ${2} ${3}"
+    \mv ${1}.tmp ${1}
+
+    IGCM_debug_PopStack "INCA_sed_replace"
+    return $RET
+}
+#-----------------------------------------------------------------
+function CHT_Initialize
+{
+    IGCM_debug_PushStack "CHT_Initialize"
+
+    RESOL_CHT=$( echo $RESOL | awk "-Fx" '{print $2}' | awk "-FD" '{print $2}')
+
+    [ -f ${SUBMIT_DIR}/../.resol ] && eval $(grep RESOL_ATM_3D ${SUBMIT_DIR}/../.resol) || RESOL_ATM_3D=96x95x19
+    RESOL_CHT_Z=$( echo ${RESOL_ATM_3D} | awk "-Fx" '{print $3}' | awk "-F-" '{print $1}')
+    echo 'resol chimie', $RESOL_CHT
+
+    [ -f ${SUBMIT_DIR}/../.chimie ] && eval $(grep CHEM ${SUBMIT_DIR}/../.chimie) 
+    INCA_sed_replace ${SUBMIT_DIR}/config.card \${CHEM} ${CHEM}
+    echo "INCA Tag : LMDZ-INCA" ${config_UserChoices_TagName}
+
+    ##- LMDZ physics version
+    ##  Read LMDZ_Physics option in lmdz.card, if not present take default value AP (old physics) 
+    if [ ! X${lmdz_UserChoices_LMDZ_Physics} = X ] ; then
+	LMDZ_Physics=${lmdz_UserChoices_LMDZ_Physics}
+    else
+	LMDZ_Physics=AP
+    fi
+    echo LMDZ physics version : ${LMDZ_Physics}
+
+
+    for frequency in ${config_CHT_WriteFrequency} ; do
+	case ${frequency} in
+	    1M|1m) freq_output=1mo ;;
+	esac
+	case ${frequency} in
+	    1D|1d) freq_output=1d ;;
+	esac
+    done
+
+
+
+    IGCM_debug_PopStack "CHT_Initialize"
+}
+
+#-----------------------------------------------------------------
+function CHT_Update
+{
+    IGCM_debug_PushStack "CHT_Update"
+
+    case ${CHEM} in 
+	AER)
+	    IGCM_comp_modifyXmlFile nonblocker file_def_inca.xml forcage     output_freq ${freq_output}
+	    IGCM_comp_modifyXmlFile nonblocker file_def_inca.xml aero        output_freq ${freq_output}
+	    IGCM_comp_modifyXmlFile nonblocker file_def_inca.xml chemistry   output_freq ${freq_output}
+	    IGCM_comp_modifyXmlFile nonblocker file_def_inca.xml emissions   output_freq ${freq_output}
+	    IGCM_comp_modifyXmlFile nonblocker file_def_inca.xml species     output_freq ${freq_output}
+	    IGCM_comp_modifyXmlFile nonblocker file_def_inca.xml dvel        output_freq ${freq_output}
+	    IGCM_comp_modifyXmlFile nonblocker file_def_inca.xml washout     output_freq ${freq_output}
+	    IGCM_comp_modifyXmlFile nonblocker file_def_inca.xml reacflux    output_freq ${freq_output}
+	    IGCM_comp_modifyXmlFile nonblocker file_def_inca.xml invariants  output_freq ${freq_output}
+
+	    if [ X${LMDZ_Physics} = X"AP" ] ; then
+		IGCM_comp_modifyDefFile nonblocker run.def config_inca aero
+	    else
+		IGCM_comp_modifyDefFile nonblocker run.def config_inca aeNP
+	    fi
+	;;
+	DUSS)
+	    IGCM_comp_modifyXmlFile nonblocker file_def_inca.xml forcage     output_freq ${freq_output}
+	    IGCM_comp_modifyXmlFile nonblocker file_def_inca.xml aero        output_freq ${freq_output}
+	    IGCM_comp_modifyXmlFile nonblocker file_def_inca.xml emissions   output_freq ${freq_output}
+	    IGCM_comp_modifyXmlFile nonblocker file_def_inca.xml species     output_freq ${freq_output}
+	    IGCM_comp_modifyXmlFile nonblocker file_def_inca.xml vegetation  output_freq ${freq_output}
+	    if [ X${LMDZ_Physics} = X"AP" ] ; then
+		IGCM_comp_modifyDefFile nonblocker run.def config_inca aero
+	    else
+		IGCM_comp_modifyDefFile nonblocker run.def config_inca aeNP
+	    fi
+	;;
+	NMHC) 
+	    IGCM_comp_modifyXmlFile nonblocker file_def_inca.xml reacflux    output_freq ${freq_output}
+	    IGCM_comp_modifyXmlFile nonblocker file_def_inca.xml emissions   output_freq ${freq_output}
+	    IGCM_comp_modifyXmlFile nonblocker file_def_inca.xml species     output_freq ${freq_output}
+	    IGCM_comp_modifyXmlFile nonblocker file_def_inca.xml chemistry   output_freq ${freq_output}
+	    IGCM_comp_modifyXmlFile nonblocker file_def_inca.xml dvel        output_freq ${freq_output}
+	    IGCM_comp_modifyXmlFile nonblocker file_def_inca.xml washout     output_freq ${freq_output}
+	    IGCM_comp_modifyDefFile nonblocker run.def config_inca chem
+	    ;;
+	NMHC_AER)
+	    IGCM_comp_modifyXmlFile nonblocker file_def_inca.xml forcage     output_freq ${freq_output}
+	    IGCM_comp_modifyXmlFile nonblocker file_def_inca.xml aero        output_freq ${freq_output}
+	    IGCM_comp_modifyXmlFile nonblocker file_def_inca.xml species     output_freq ${freq_output}
+	    IGCM_comp_modifyXmlFile nonblocker file_def_inca.xml chemistry   output_freq ${freq_output}
+	    IGCM_comp_modifyXmlFile nonblocker file_def_inca.xml emissions   output_freq ${freq_output}
+	    IGCM_comp_modifyXmlFile nonblocker file_def_inca.xml dvel        output_freq ${freq_output}
+	    IGCM_comp_modifyXmlFile nonblocker file_def_inca.xml washout     output_freq ${freq_output}
+	    IGCM_comp_modifyXmlFile nonblocker file_def_inca.xml reacflux    output_freq ${freq_output}
+	    IGCM_comp_modifyXmlFile nonblocker file_def_inca.xml vegetation  output_freq ${freq_output}
+	    if [ X${LMDZ_Physics} = X"AP" ] ; then
+		IGCM_comp_modifyDefFile nonblocker run.def config_inca aero
+	    else
+		IGCM_comp_modifyDefFile nonblocker run.def config_inca aeNP
+	    fi
+	;;
+	GES)
+	    IGCM_comp_modifyXmlFile nonblocker file_def_inca.xml emissions   output_freq ${freq_output}
+	    IGCM_comp_modifyDefFile nonblocker run.def config_inca chem
+	esac
+
+    
+
+
+    # inca.def : Activate reading of 10m wind in files if LMDZ_10m_winds=n in inca.card
+    if [ ! X${inca_UserChoices_LMDZ_10m_winds} = X ] ; then
+	IGCM_comp_modifyDefFile nonblocker inca.def LMDZ_10m_winds  ${inca_UserChoices_LMDZ_10m_winds}
+    else
+	IGCM_comp_modifyDefFile nonblocker inca.def LMDZ_10m_winds  n
+    fi
+
+    # inca.def : choose write frequency for inca_avgr in inca.card
+    if [ ! X${inca_UserChoices_freq_write_chem} = X ] ; then
+	IGCM_comp_modifyDefFile nonblocker inca.def freq_write_chem  ${inca_UserChoices_freq_write_chem}
+    else
+	IGCM_comp_modifyDefFile nonblocker inca.def  freq_write_chem  86400
+    fi
+
+    #inca.def : choose aerosol effect with feedback variable
+    if [ ! X${inca_UserChoices_feedb} = X ] ; then
+	IGCM_comp_modifyDefFile nonblocker inca.def  feedb  ${inca_UserChoices_feedb}
+    else
+	IGCM_comp_modifyDefFile nonblocker inca.def feedb  0
+    fi
+    
+    #inca.def : choose coupled model with orchidee  
+    if [ ! X${inca_UserChoices_CoupOrchInca} = X ]; then 
+	IGCM_comp_modifyDefFile nonblocker inca.def CoupOrchInca ${inca_UserChoices_CoupOrchInca}
+    else
+	IGCM_comp_modifyDefFile nonblocker inca.def CoupOrchInca n
+    fi
+
+    #inca.def : choose sedimentation schema 
+    if [ ! X${inca_UserChoices_multilayer_sedim} = X ]; then 
+	IGCM_comp_modifyDefFile nonblocker inca.def multilayer_sediment ${inca_UserChoices_multilayer_sedim}
+    else
+	IGCM_comp_modifyDefFile nonblocker inca.def multilayer_sediment y
+    fi
+
+    #inca.def : choose calcul interactif des diagnostiques flux chimique ou non  
+    if [ ! X${inca_UserChoices_calcul_flux} = X ]; then 
+	IGCM_comp_modifyDefFile nonblocker inca.def calcul_flux ${inca_UserChoices_calcul_flux}
+    else
+	IGCM_comp_modifyDefFile nonblocker inca.def calcul_flux n
+    fi
+
+    #inca.def : choose output library 
+    if [  X${inca_UserChoices_XIOS} = Xy ] ; then
+	IGCM_comp_modifyDefFile nonblocker inca.def  XIOS_INCA_OK  y
+    else
+	IGCM_comp_modifyDefFile nonblocker inca.def  XIOS_INCA_OK n
+    fi
+
+    if [  X${inca_UserChoices_IOIPSL} = Xy ] ; then
+	IGCM_comp_modifyDefFile nonblocker inca.def  IOIPSL_INCA_OK  y
+    else
+	IGCM_comp_modifyDefFile nonblocker inca.def  IOIPSL_INCA_OK n
+    fi
+
+
+    if [  X${inca_UserChoices_10m_winds_method} = X ] ; then
+    IGCM_comp_modifyDefFile nonblocker inca.def  10m_winds_method  threshold
+    else
+    IGCM_comp_modifyDefFile nonblocker inca.def  10m_winds_method ${inca_UserChoices_10m_winds_method}
+    fi
+
+
+
+    if [ X${inca_UserChoices_XIOS}  = Xy ] ; then
+    # Add include of INCA context in iodef.xml
+    # In iodef.xml add on next line after "COMPONENT CONTEXT"
+    #  <context id="inca" src="./context_inca.xml"/>
+	echo '<context id="inca" src="./context_inca.xml"/>' > add.tmp
+	cp iodef.xml iodef.xml.tmp
+	sed -e "/COMPONENT CONTEXT/r add.tmp" \
+	    iodef.xml.tmp > iodef.xml
+	rm iodef.xml.tmp add.tmp
+    fi
+
+    # Add LongName as global attribute in XIOS output files (if LongName is not empty)
+    if [ ! "X${config_UserChoices_LongName}" = "X" ] ; then
+	listfile=$(ls file_def*inca.xml)
+	echo "<variable id=\"LongName\" type=\"string\">${config_UserChoices_LongName}</variable>" > add.tmp
+	for file in ${listfile}
+	do
+	    cp ${file} ${file}.tmp
+	    sed -e "/<file id/r add.tmp" \
+		${file}.tmp > ${file}
+	    rm ${file}.tmp 
+	done
+	rm add.tmp
+    fi
+
+    IGCM_debug_PopStack "CHT_Update"
+}
+
+#-----------------------------------------------------------------
+function CHT_Finalize
+{
+    IGCM_debug_PushStack "CHT_Finalize"
+
+    echo FINALIZE CHT !!!
+#
+#    IGCM_sys_Mkdir ${R_OUT_EXE}
+#    cd ${MODIPSL}
+#    tar cf src_${config_UserChoices_JobName}.tar  modeles
+#    IGCM_sys_Mv src_${config_UserChoices_JobName}.tar ${R_OUT_EXE}/.
+#    cd -
+#
+
+    IGCM_debug_PopStack "CHT_Finalize"
+}
Index: CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/DRIVER/lmdz.driver
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/DRIVER/lmdz.driver	(revision 3559)
+++ CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/DRIVER/lmdz.driver	(revision 3559)
@@ -0,0 +1,632 @@
+#!/bin/ksh
+#-----------------------------------------------------------------
+function ATM_Initialize
+{
+    IGCM_debug_PushStack "ATM_Initialize"
+
+    RESOL_ATM=$( echo $RESOL | awk "-Fx" '{print $2}' | awk "-F-" '{print $1}')
+
+    [ -f ${SUBMIT_DIR}/../.resol ] && eval $(grep RESOL_ATM_3D ${SUBMIT_DIR}/../.resol) || RESOL_ATM_3D=96x95x39
+
+    RESOL_ATM_Z=$( echo ${RESOL_ATM_3D} | awk "-Fx" '{print $3}' )
+    RESOL_ATM_X=$( echo ${RESOL_ATM_3D} | awk "-Fx" '{print $1}' )
+    RESOL_ATM_Y=$( echo ${RESOL_ATM_3D} | awk "-Fx" '{print $2}' )
+    RESOL_ATM_XY="${RESOL_ATM_X}x${RESOL_ATM_Y}"
+
+    ##- LMDZ physics version
+    ##  Read LMDZ_Physics option in lmdz.card, if not present take default value AP (old physics) 
+    if [ ! X${lmdz_UserChoices_LMDZ_Physics} = X ] ; then
+	LMDZ_Physics=${lmdz_UserChoices_LMDZ_Physics}
+    else
+	LMDZ_Physics=AP
+    fi
+    echo LMDZ physics version : ${LMDZ_Physics}
+
+    ##- Create_etat0_limit version
+    ##  Define variable CREATE only if it is set in lmdz.card section UserChoices.
+    ##  This variable is only used in lmdz.card to choose input files.
+    if [ ! X${lmdz_UserChoices_CREATE} = X ] ; then
+	IGCM_card_DefineVariableFromOption ${SUBMIT_DIR}/COMP/lmdz.card UserChoices CREATE
+	CREATE=${lmdz_UserChoices_CREATE}
+	echo create_etat0_limit version : ${CREATE}
+    fi
+
+
+    ## - LMDZ choice of config.def file
+    ##   ConfType must be set in lmdz.card
+    ConfType=${lmdz_UserChoices_ConfType}
+
+    ##- LMDZ output level, to be set in lmdz.card
+    if [ X${lmdz_UserChoices_OutLevel} = X ] ; then
+	# OutLevel is not set. Take default value low.
+	OutLevel=low
+    else
+	OutLevel=${lmdz_UserChoices_OutLevel}
+    fi
+
+    ##-- Output frequency purpose ....
+    ##--  Initialisation  ....
+    ok_mensuel=.FALSE.
+    ok_journe=.FALSE.
+    ok_hf=.FALSE.
+    ok_hf3h=.FALSE.
+    ok_hf3hm=.FALSE.
+    ok_stn=.FALSE.
+
+    case ${config_UserChoices_PeriodLength} in
+	1Y|1y|1M|1m) ok_mensuel=.TRUE. ;;
+	5D|5d|1D|1d) ok_journe=.TRUE. ;;
+    esac
+
+    for frequency in ${config_ATM_WriteFrequency} ; do
+	case ${frequency} in
+	    1M|1m) ok_mensuel=.TRUE. ;;
+	esac
+	case ${frequency} in
+	    5D|5d|1D|1d) ok_journe=.TRUE. ;;
+	esac
+	case ${frequency} in
+	    HF|hf) ok_hf=.TRUE. ;;
+	esac
+	case ${frequency} in 
+	    HF3h|hf3h) ok_hf3h=.TRUE. ;;
+	esac
+	case ${frequency} in 
+	    HF3hm|hf3hm) ok_hf3hm=.TRUE. ;;
+	esac
+	case ${frequency} in
+	    STN|stn) ok_stn=.TRUE. ;;
+	esac
+    done
+
+    ##  Read LMDZ_COSP_OK in lmdz.card
+    if [ X${lmdz_UserChoices_LMDZ_COSP_OK} = Xy ] ; then
+	##  LMDZ_COSP_OK=y, now read all other COSP variables
+	##  Read LMDZ_COSP_monthly in lmdz.card
+	if [ X${lmdz_UserChoices_LMDZ_COSP_monthly} = Xy ] ; then
+	    LMDZ_COSP_monthly=.TRUE.
+	else
+	    LMDZ_COSP_monthly=.FALSE.
+	fi
+        ##  Read LMDZ_COSP_daily in lmdz.card
+	if [ X${lmdz_UserChoices_LMDZ_COSP_daily} = Xy ] ; then
+	    LMDZ_COSP_daily=.TRUE.
+	else
+	    LMDZ_COSP_daily=.FALSE.
+	fi
+        ##  Read LMDZ_COSP_hf in lmdz.card
+	if [ X${lmdz_UserChoices_LMDZ_COSP_hf} = Xy ] ; then
+	    LMDZ_COSP_hf=.TRUE.
+	else
+	    LMDZ_COSP_hf=.FALSE.
+	fi
+    else
+	# LMDZ_COSP_OK=n : All cosp output are deactivated
+	LMDZ_COSP_monthly=.FALSE.
+	LMDZ_COSP_daily=.FALSE.
+	LMDZ_COSP_hf=.FALSE.
+    fi	
+
+    ##  Read LMDZ_NMC_monthly in lmdz.card
+    if [ X${lmdz_UserChoices_LMDZ_NMC_monthly} = Xy ] ; then
+	LMDZ_NMC_monthly=.TRUE.
+    else
+	LMDZ_NMC_monthly=.FALSE.
+    fi
+    
+    ## Read LMDZ_NMC_daily in lmdz.card
+    if [ X${lmdz_UserChoices_LMDZ_NMC_daily} = Xy ] ; then
+	LMDZ_NMC_daily=.TRUE.
+    else
+	LMDZ_NMC_daily=.FALSE.
+    fi
+    
+    ## Read LMDZ_NMC_hf in lmdz.card
+    if [ X${lmdz_UserChoices_LMDZ_NMC_hf} = Xy ] ; then
+	LMDZ_NMC_hf=.TRUE.
+    else
+	LMDZ_NMC_hf=.FALSE.
+    fi
+    
+
+    IGCM_debug_PopStack "ATM_Initialize"
+}
+
+#-----------------------------------------------------------------
+function ATM_Update
+{
+    IGCM_debug_PushStack "ATM_Update"
+
+    ##-- GHG forcing :
+    ##   If forcing file exist in run directory, read values for the current year 
+    ##   and set in config.def. If not use the default value set in config.def
+
+    # Read value for solaire from file SOLARANDVOLCANOES.txt. If file not existing, take DEFAULT value from file. 
+    IGCM_debug_Print 1 "Note that the solaire parameter is here below changed but it is only used by LMDZ for old physics(AP and NPv3.2)"
+    IGCM_debug_Print 1 "For newer physics with iflag_rrtm=1 and ok_suntime_rrtm=y, the solar constant is instead taken from solarforcing.nc file"
+    if [ -f SOLARANDVOLCANOES.txt ] ; then
+	value=`grep Annee_${year} SOLARANDVOLCANOES.txt | awk -F= '{print $2}'`
+	if [ X"${value}" = X ] ; then
+	    # The grep returned empty variable, stop execution
+	    IGCM_debug_Exit "The file SOLARANDVOLCANOES.txt do not contain the current year."
+	    IGCM_debug_Verif_Exit
+	fi
+    else
+	value=DEFAULT
+    fi
+    IGCM_comp_modifyDefFile nonblocker config.def solaire $value
+
+
+    # Read value for co2_ppm from file CO2.txt. If file not existing, take DEFAULT value from file. 
+    if [ -f CO2.txt ] ; then
+       	value=`grep Annee_${year} CO2.txt | awk -F= '{print $2}'`
+	if [ X"${value}" = X ] ; then
+	    # The grep returned empty variable, stop execution
+	    IGCM_debug_Exit "The file CO2.txt do not contain the current year."
+	    IGCM_debug_Verif_Exit
+	fi
+    else
+	value=DEFAULT
+    fi
+    IGCM_comp_modifyDefFile nonblocker config.def co2_ppm $value
+
+
+    # Read value for CH4_ppb from file CH4.txt. If file not existing, take DEFAULT value from file. 
+    if [ -f CH4.txt ] ; then
+	value=`grep Annee_${year} CH4.txt | awk -F= '{print $2}'`
+	if [ X"${value}" = X ] ; then
+	    # The grep returned empty variable, stop execution
+	    IGCM_debug_Exit "The file CH4.txt do not contain the current year."
+	    IGCM_debug_Verif_Exit
+	fi
+    else
+	value=DEFAULT
+    fi
+    IGCM_comp_modifyDefFile nonblocker config.def CH4_ppb $value
+
+
+    # Read value for N2O_ppb from file N2O.txt. If file not existing, take DEFAULT value from file. 
+    if [ -f N2O.txt ] ; then
+	value=`grep Annee_${year} N2O.txt | awk -F= '{print $2}'`
+	if [ X"${value}" = X ] ; then
+	    # The grep returned empty variable, stop execution
+	    IGCM_debug_Exit "The file N2O.txt do not contain the current year."
+	    IGCM_debug_Verif_Exit
+	fi
+    else
+	value=DEFAULT
+    fi
+    IGCM_comp_modifyDefFile nonblocker config.def N2O_ppb $value
+
+    # Read value for CFC11_ppt from file CFC11.txt. If file not existing, take DEFAULT value from file. 
+    if [ -f CFC11.txt ] ; then
+	value=`grep Annee_${year} CFC11.txt | awk -F= '{print $2}'`
+	if [ X"${value}" = X ] ; then
+	    # The grep returned empty variable, stop execution
+	    IGCM_debug_Exit "The file CFC11.txt do not contain the current year."
+	    IGCM_debug_Verif_Exit
+	fi
+    else
+	value=DEFAULT
+    fi
+    IGCM_comp_modifyDefFile nonblocker config.def CFC11_ppt $value
+
+
+    # Read value for CFC12_ppt from file CFC12.txt. If file not existing, take DEFAULT value from file. 
+    if [ -f CFC12.txt ] ; then
+	value=`grep Annee_${year} CFC12.txt | awk -F= '{print $2}'`
+	if [ X"${value}" = X ] ; then
+	    # The grep returned empty variable, stop execution
+	    IGCM_debug_Exit "The file CFC12.txt do not contain the current year."
+	    IGCM_debug_Verif_Exit
+	fi
+    else
+	value=DEFAULT
+    fi
+    IGCM_comp_modifyDefFile nonblocker config.def CFC12_ppt $value
+
+
+    ## Coupling Time Step : Take value of FreqCoupling set in oasis.card or if it is not set, take default value 86400
+    LMDZ_t_coupl=${oasis_UserChoices_FreqCoupling:-86400}
+    IGCM_debug_Print 3 "LMDZ_t_coupl "   ${LMDZ_t_coupl}
+    IGCM_comp_modifyDefFile nonblocker config.def t_coupl   ${LMDZ_t_coupl} 
+
+    ##-- Add special treatement for CARBON CYCLE
+    if [ X"${lmdz_UserChoices_CARBON_CYCLE}" = X"control" ] || [ X"${lmdz_UserChoices_CARBON_CYCLE}" = X"historical" ] ; then
+	ATM_Carbon_Update
+    fi
+
+
+    ##-- Set LMDZ_COSP_daily1979=y in section UserChoices in lmdz.card to activate 
+    ##   COSP daily output for years 1979 and later (mandatory for historical CMIP5 run).
+    if ([ X"${lmdz_UserChoices_LMDZ_COSP_daily1979}" = X"y" ] &&  [ ${year} -ge 1979 ]) ; then
+	LMDZ_COSP_daily=.TRUE.
+    fi
+
+    ## Modifiy 
+    IGCM_comp_modifyXmlFile nonblocker file_def_histmth_lmdz.xml histmth enabled ${ok_mensuel}
+    
+    IGCM_comp_modifyXmlFile nonblocker file_def_histday_lmdz.xml histday enabled ${ok_journe}
+    
+    if [ X${OutLevel} = Xlow ] || [ X${OutLevel} = Xmedium ] ; then
+	IGCM_comp_modifyXmlFile nonblocker file_def_histday_lmdz.xml histday output_level 2
+    else
+	IGCM_comp_modifyXmlFile nonblocker file_def_histday_lmdz.xml histday output_level 5
+    fi
+    
+    IGCM_comp_modifyXmlFile nonblocker file_def_histhf_lmdz.xml histhf enabled ${ok_hf}
+    
+    if [ X${OutLevel} = Xlow ] ; then
+	IGCM_comp_modifyXmlFile nonblocker file_def_histhf_lmdz.xml histhf output_level 5
+    elif [ X${OutLevel} = Xmedium ] ; then
+	IGCM_comp_modifyXmlFile nonblocker file_def_histhf_lmdz.xml histhf output_level 6
+    elif [ X${OutLevel} = Xhigh ] ; then
+	IGCM_comp_modifyXmlFile nonblocker file_def_histhf_lmdz.xml histhf output_level 7
+    fi
+    	
+    IGCM_comp_modifyXmlFile nonblocker file_def_histhf3h_lmdz.xml histhf3h enabled ${ok_hf3h}
+    IGCM_comp_modifyXmlFile nonblocker file_def_histhf3hm_lmdz.xml histhf3hm enabled ${ok_hf3hm}
+
+    IGCM_comp_modifyXmlFile nonblocker file_def_histstn_lmdz.xml histstn enabled ${ok_stn}
+
+    IGCM_comp_modifyXmlFile nonblocker file_def_histmthNMC_lmdz.xml histmthNMC enabled ${LMDZ_NMC_monthly}
+    IGCM_comp_modifyXmlFile nonblocker file_def_histdayNMC_lmdz.xml histdayNMC enabled ${LMDZ_NMC_daily}
+    IGCM_comp_modifyXmlFile nonblocker file_def_histhfNMC_lmdz.xml histhfNMC enabled ${LMDZ_NMC_hf}
+    
+    IGCM_comp_modifyXmlFile nonblocker file_def_histmthCOSP_lmdz.xml histmthCOSP enabled ${LMDZ_COSP_monthly}
+    IGCM_comp_modifyXmlFile nonblocker file_def_histdayCOSP_lmdz.xml histdayCOSP enabled ${LMDZ_COSP_daily}
+    IGCM_comp_modifyXmlFile nonblocker file_def_histhfCOSP_lmdz.xml histhfCOSP enabled ${LMDZ_COSP_hf}
+
+    # Activate the histstrataer output file only for configuration with interactive stratospheric aersols 
+    # done by setting the key word LMDZ_strataero=y in lmdz.card
+    if [ X${lmdz_UserChoices_LMDZ_strataero} = Xy ] ; then
+	IGCM_comp_modifyXmlFile nonblocker file_def_histstrataer_lmdz.xml histstrataer enabled .TRUE.
+    else
+	IGCM_comp_modifyXmlFile nonblocker file_def_histstrataer_lmdz.xml histstrataer enabled .FALSE.
+    fi
+
+
+    ## run.def parameters
+
+
+    ##-- Remise ou non a zero de la date initiale de LMDZ pour le fichier run.def
+    if [ ${CumulPeriod} -eq 1 ] ; then
+	IGCM_comp_modifyDefFile blocker run.def raz_date  1
+    else
+	IGCM_comp_modifyDefFile blocker run.def raz_date  0
+    fi
+
+    ##-- Calendar type for LMDZ and create_etat0_limit
+    case ${config_UserChoices_CalendarType} in
+        leap|gregorian)
+	    IGCM_comp_modifyDefFile blocker run.def calend  gregorian ;;
+        noleap)
+	    IGCM_comp_modifyDefFile blocker run.def calend  earth_365d ;;
+        360d)
+	    IGCM_comp_modifyDefFile blocker run.def calend  earth_360d ;;
+        *)
+	    IGCM_comp_modifyDefFile blocker run.def calend  earth_360d ;;
+    esac
+
+    IGCM_comp_modifyDefFile blocker run.def dayref    ${InitDay}
+    IGCM_comp_modifyDefFile blocker run.def nday      ${PeriodLengthInDays}
+
+    # Set anneeref different for gcm and ce0l
+    # Test if executable create_etat0_limit is present and lmdz.x is not present
+    if [ -f create_etat0_limit* ] || [ -f ce0l* ] && [ ! -f lmdz.x ] ; then
+	# for case ce0l : always take current year
+	IGCM_comp_modifyDefFile blocker run.def anneeref ${year}
+
+        # Temporary, set use_filtre_fft=n because we now use dyn3d for ce0l version where fft is not implemented. 
+        # In more recent versions of LMDZ, this will not be needed. 
+	IGCM_comp_modifyDefFile force   run.def use_filtre_fft n
+    else
+	# for case gcm : take first year of simulation
+	IGCM_comp_modifyDefFile blocker run.def anneeref ${InitYear}
+    fi
+
+    ## Determine from the variable ListOfComponents in config.card coupling to external models 
+    ## and set corresponding parameters in run.def
+    echo ListOfComponents now running : ${config_ListOfComponents[*]}
+
+    if [ X${config_ListOfComponents_SRF} = Xorchidee ] ; then
+	echo "Activate ORCHIDEE, set VEGET=y in run.def"
+	IGCM_comp_modifyDefFile blocker run.def VEGET y
+    else
+	echo "No ORCHIDEE, set VEGET=n in run.def"
+	IGCM_comp_modifyDefFile blocker run.def VEGET n
+    fi
+
+    if [ X${config_ListOfComponents_CPL} = Xoasis ] ; then
+	echo "Activate coupling to ocean, set type_ocean=couple in run.def"
+	IGCM_comp_modifyDefFile blocker run.def type_ocean couple
+    else
+	echo "LMDZ is running in forced mode without ocean model, set type_ocean=force in run.def"
+	IGCM_comp_modifyDefFile blocker run.def type_ocean force
+    fi
+
+    if [ X"${config_ListOfComponents_CHT}" = X"inca" ] || [ X"${config_ListOfComponents_CHS}"= "X"] ; then
+	echo "Activate coupling to INCA, set type_trac=inca in run.def"
+	IGCM_comp_modifyDefFile blocker run.def type_trac inca
+    elif [ X"${config_ListOfComponents_CHS}" = X"reprobus" ] || [ X"${config_ListOfComponents_CHT}"= "X"] ; then
+	echo "Activate coupling to REPROBUS, set type_trac=repr in run.def"
+	IGCM_comp_modifyDefFile blocker run.def type_trac repr
+        IGCM_comp_modifyDefFile blocker run.def config_inca none
+    elif [ X${config_ListOfComponents_CHT} = Xinca  -a  X${config_ListOfComponents_CHS} = Xreprobus ] ; then
+	IGCM_comp_modifyDefFile blocker run.def type_trac inca_repr
+	echo "nous sommes dans le cas inca_reprobus"
+    else
+	echo "No coupling to chemistry model, set type_trac=lmdz in run.def"
+	IGCM_comp_modifyDefFile blocker run.def type_trac lmdz
+        IGCM_comp_modifyDefFile blocker run.def config_inca none
+    fi
+
+
+    # config.def : Activate direct radiative effect if ok_ade=y
+    if [ ! X${lmdz_UserChoices_ok_ade} = X ]; then 
+	IGCM_comp_modifyDefFile nonblocker config.def ok_ade ${lmdz_UserChoices_ok_ade}
+    else
+	IGCM_comp_modifyDefFile nonblocker config.def ok_ade n
+    fi 
+
+    # config.def : Activate indirect radiative effect if ok_aie=y
+    if [ ! X${lmdz_UserChoices_ok_aie} = X ]; then 
+	IGCM_comp_modifyDefFile nonblocker config.def ok_aie ${lmdz_UserChoices_ok_aie}
+    else
+	IGCM_comp_modifyDefFile nonblocker config.def ok_aie n
+    fi 
+
+    # config.def : Activate online aerosol coupled model if aerosol_couple=y
+    if [ ! X${lmdz_UserChoices_aerosol_couple} = X ]; then 
+	IGCM_comp_modifyDefFile nonblocker config.def aerosol_couple ${lmdz_UserChoices_aerosol_couple}
+    else
+	IGCM_comp_modifyDefFile nonblocker config.def aerosol_couple n
+    fi 
+
+    # config.def : Activate reading of ozone in climatology if read_climoz=2
+    if [ ! X${lmdz_UserChoices_read_climoz} = X ]; then 
+	IGCM_comp_modifyDefFile nonblocker config.def read_climoz ${lmdz_UserChoices_read_climoz}
+    else
+	IGCM_comp_modifyDefFile nonblocker config.def read_climoz 0	
+    fi 
+
+    # config.def : Choose aerosol use in radiative effect 
+    #  type of coupled aerosol =1 (default) =2 => bc  only =3 => pom only =4 => seasalt only 
+    # =5 => dust only =6 => all aerosol    
+    if [ ! X${lmdz_UserChoices_flag_aerosol} = X ]; then 
+	IGCM_comp_modifyDefFile nonblocker config.def flag_aerosol ${lmdz_UserChoices_flag_aerosol}
+    else
+	IGCM_comp_modifyDefFile nonblocker config.def flag_aerosol 0
+    fi 
+
+    # config.def : Activate calcul of Cloud droplet number concentration if ok_cdnc=y
+    if [ ! X${lmdz_UserChoices_ok_cdnc} = X ]; then 
+	IGCM_comp_modifyDefFile nonblocker config.def ok_cdnc ${lmdz_UserChoices_ok_cdnc}
+    else
+	IGCM_comp_modifyDefFile nonblocker config.def ok_cdnc n	
+    fi 
+
+    # config.def : Activate COSP
+    if [ ! X${lmdz_UserChoices_LMDZ_COSP_OK} = X ]; then 
+	IGCM_comp_modifyDefFile nonblocker config.def ok_cosp ${lmdz_UserChoices_LMDZ_COSP_OK}
+    else
+	IGCM_comp_modifyDefFile nonblocker config.def ok_cosp n	
+    fi 
+
+    # config.def : Modify parameter pmagic if it is set in lmdz.card
+    if [ ! X${lmdz_UserChoices_pmagic} = X ]; then 
+	IGCM_comp_modifyDefFile nonblocker config.def pmagic ${lmdz_UserChoices_pmagic}
+    else
+	# Take default value set in config.def
+	IGCM_comp_modifyDefFile nonblocker config.def pmagic DEFAULT
+    fi 
+
+    # guide.def : Activate nudging if ok_guide=y set in lmdz.card
+    if [ ! X${lmdz_UserChoices_ok_guide} = X ] ; then
+	IGCM_comp_modifyDefFile nonblocker guide.def ok_guide  ${lmdz_UserChoices_ok_guide}
+    else
+	IGCM_comp_modifyDefFile nonblocker guide.def ok_guide n
+    fi
+
+    ## Read ByPass_hgardfou_teta option in lmdz.card --> divide teta* by 2 if [ $ByPass_hgardfou_teta = 1 ]
+    ByPass_hgardfou_teta=${lmdz_UserChoices_ByPass_hgardfou_teta}
+    if [ X"${ByPass_hgardfou_teta}" = X"y" ] ; then
+	awk '{ if ($0 ~ /^teta.*=/) {split($0,a,"=") ; print a[1]"="a[2]/2"."} else print $0}' gcm.def > gcm.def.tmp
+	IGCM_sys_Mv gcm.def.tmp gcm.def
+	echo
+	IGCM_debug_Print 1 "ByPass_hgardfou_teta : ^teta*/2 in gcm.def"
+	echo
+	cat gcm.def
+	ByPass_hgardfou_teta=n
+	IGCM_card_WriteOption ${SUBMIT_DIR}/COMP/lmdz.card UserChoices ByPass_hgardfou_teta "${ByPass_hgardfou_teta}"
+    fi
+
+    ## Read ByPass_hgardfou_mats option in lmdz.card --> purmats=y 2 if [ $ByPass_hgardfou_mats = 1 ]
+    ByPass_hgardfou_mats=${lmdz_UserChoices_ByPass_hgardfou_mats}
+    if [ X"${ByPass_hgardfou_mats}" = X"y" ] ; then
+	sed -e "s/^purmats=.*/purmats=y/" gcm.def > gcm.def.tmp
+        IGCM_sys_Mv gcm.def.tmp gcm.def
+        echo
+        IGCM_debug_Print 1 "ByPass_hgardfou_mats : purmats=y in gcm.def"
+        echo
+        cat gcm.def
+        ByPass_hgardfou_mats=n
+        IGCM_card_WriteOption ${SUBMIT_DIR}/COMP/lmdz.card UserChoices ByPass_hgardfou_mats "${ByPass_hgardfou_mats}"
+    fi
+
+    # Add include of LMDZ context in iodef.xml
+    # In iodef.xml add on next line after "COMPONENT CONTEXT"
+    #  <context id="LMDZ" src="./context_lmdz.xml"/>
+    echo '<context id="LMDZ" src="./context_lmdz.xml"/>' > add.tmp
+    cp iodef.xml iodef.xml.tmp
+    sed -e "/COMPONENT CONTEXT/r add.tmp" iodef.xml.tmp > iodef.xml
+    rm iodef.xml.tmp add.tmp
+
+    #Long Name as global attribute (if LongName is not empty)
+    if [ ! "X${config_UserChoices_LongName}" = "X" ] ; then
+	listfile=$(ls file_def*lmdz.xml)
+	echo "<variable id=\"LongName\" type=\"string\">${config_UserChoices_LongName}</variable>" > add.tmp
+	for file in ${listfile}
+	do
+	    cp ${file} ${file}.tmp
+	    sed -e "/<file id/r add.tmp" \
+		${file}.tmp > ${file}
+	    rm ${file}.tmp 
+	done
+	rm add.tmp
+    fi
+            
+    IGCM_debug_PopStack "ATM_Update"
+}
+
+#-----------------------------------
+function ATM_Finalize
+{
+    IGCM_debug_PushStack "ATM_Finalize"
+
+    # Add special treatement for CARBON CYCLE
+    if [ X"${lmdz_UserChoices_CARBON_CYCLE}" = X"control" ] || [ X"${lmdz_UserChoices_CARBON_CYCLE}" = X"historical" ] ; then
+	ATM_Carbon_Finalize
+    fi
+
+    echo FINALIZE ATM !
+
+    IGCM_debug_PopStack "ATM_Finalize"
+}
+
+
+
+function ATM_Carbon_Update
+{
+    # This fuction will be called only if CARBON_CYCLE is set to control or historical in lmdz.card
+
+    IGCM_debug_PushStack "ATM_Carbon_Update"
+
+    typeset InitPeriodCo2 InitDateBeginCo2 InitDateEndCo2
+    typeset CO2SBG CO2MBG CO2LU CO2_ppm CO2_ppm_prec fCO2_ff
+    typeset PathCO2log 
+    typeset PreviousLinelog LastPeriodDateBegin LastPeriodDateEnd LastDatesPeriod LastPREFIX
+    
+    if ( ${FirstInitialize} && [ X"${config_ATM_Restart}" = X"n" ] ) ; then
+        ##--Initialization of fluxes to an undefined value at the first run
+	UndefinedValueCo2=-9999
+	InitPeriodCo2=0
+	InitDateBeginCo2=${UndefinedValueCo2}
+	InitYearCo2=$(( ${year} - 1 )) 
+	InitDateEndCo2=${InitYearCo2}1231
+	fCO2_ff=${UndefinedValueCo2} 
+	CO2SBG=${UndefinedValueCo2}
+	CO2LU=${UndefinedValueCo2}
+	CO2MBG=${UndefinedValueCo2}
+	CO2_ppm_prec=${UndefinedValueCo2}
+        # Get the initial value of atmosp. pco2 
+	CO2_ppm=${lmdz_UserChoices_co2_init}
+	
+	IGCM_sys_Cp ${SUBMIT_DIR}/co2.log.init ${SUBMIT_DIR}/co2.log
+	IGCM_sys_Chmod u+w ${SUBMIT_DIR}/co2.log
+	
+        # Save CO2 values in ExeCpuLog variable contents 5 fields
+	echo "${InitPeriodCo2} ${InitDateBeginCo2} ${InitDateEndCo2} ${CO2_ppm} ${CO2_ppm_prec} ${fCO2_ff} ${CO2MBG} ${CO2SBG} ${CO2LU}" |   \
+	    gawk '{printf("  %11d | %15s | %15s | %22.15g | %20.15g | %11.8g | %11.8g | %12.8g | %12.8g \n", \
+                              $1,$2,$3,$4,$5,$6,$7,$8,$9)}' >> ${SUBMIT_DIR}/co2.log
+	
+        # Get the path where the log file co2.log is
+	PathCO2log=${SUBMIT_DIR} 
+        # Get Previous line in co2.log
+	PreviousLinelog=$( tail -1 ${PathCO2log}/co2.log )
+	
+    else
+	
+	# NEW parameter in config.card (even for Overule all restarts, you must modify the line after this comment ):
+        # !! NEW for Carbone cycle !! Path where to find old co2.log file for restart CO2.
+	#SubmitRestartPath=
+	if ( ${FirstInitialize} && [ X"${config_ATM_Restart}" = X"y" ] ) ; then
+	    IGCM_card_DefineVariableFromOption ${SUBMIT_DIR}/config.card ATM SubmitRestartPath
+	    PathCO2log=${config_ATM_SubmitRestartPath}
+	    Date_r=$( IGCM_date_ConvertFormatToGregorian ${config_ATM_RestartDate} )
+	    PreviousLinelog=$( grep ${Date_r} ${PathCO2log}/co2.log )
+	    
+	    IGCM_sys_Cp ${SUBMIT_DIR}/co2.log.init ${SUBMIT_DIR}/co2.log
+	    IGCM_sys_Chmod u+w ${SUBMIT_DIR}/co2.log
+	    
+            # Save Last Line of control in new co2.log file
+	    InitPeriodCo2=0   
+	    InitDateBeginCo2=$( echo "${PreviousLinelog[*]}" | gawk -F '|' '{gsub(" ",""); print $2}' )
+	    InitDateEndCo2=$( echo "${PreviousLinelog[*]}" | gawk -F '|' '{gsub(" ",""); print $3}' )
+	    fCO2_ff=$( echo "${PreviousLinelog[*]}" | gawk -F '|' '{gsub(" ",""); print $6}' )
+	    CO2SBG=$( echo "${PreviousLinelog[*]}" | gawk -F '|' '{gsub(" ",""); print $8}' )
+	    CO2LU=$( echo "${PreviousLinelog[*]}" | gawk -F '|' '{gsub(" ",""); print $9}' )
+	    CO2MBG=$( echo "${PreviousLinelog[*]}" | gawk -F '|' '{gsub(" ",""); print $7}' )
+	    CO2_ppm_prec=$( echo "${PreviousLinelog[*]}" | gawk -F '|' '{gsub(" ",""); print $5}' )
+	    CO2_ppm=$( echo "${PreviousLinelog[*]}" | gawk -F '|' '{gsub(" ",""); print $4}' )
+	    
+	    echo "${InitPeriodCo2} ${InitDateBeginCo2} ${InitDateEndCo2} ${CO2_ppm} ${CO2_ppm_prec} ${fCO2_ff} ${CO2MBG} ${CO2SBG} ${CO2LU}" |   \
+		gawk '{printf("  %11d | %15s | %15s | %22.15g | %20.15g | %11.8g | %11.8g | %12.8g | %12.8g \n", \
+                              $1,$2,$3,$4,$5,$6,$7,$8,$9)}' >> ${SUBMIT_DIR}/co2.log
+	else
+           # Get restart line in co2.log
+	    PathCO2log=${SUBMIT_DIR}
+	    PreviousLinelog=$( tail -1 ${PathCO2log}/co2.log )
+           # Get the value of atmosp. pco2 in co2.log
+	    CO2_ppm=$( echo "${PreviousLinelog[*]}" | gawk -F '|' '{gsub(" ",""); print $4}' )
+	fi
+	
+    fi
+    
+    if [ ${lmdz_UserChoices_CARBON_CYCLE} = historical ] ; then
+	# Modify co2_ppm in config.def only for historical run
+	# If not historical run, keep co2_ppm value set earlier by IGCM_comp_modifyDefFile
+	IGCM_comp_modifyDefFile force config.def co2_ppm     ${CO2_ppm}
+    fi
+    IGCM_debug_PopStack "ATM_Carbon_Update"
+}
+
+
+function ATM_Carbon_Finalize
+{
+    # This fuction will be called only if CARBON_CYCLE is set to control or historical in lmdz.card
+
+    IGCM_debug_PushStack "ATM_Carbon_Finalize"
+
+    typeset CO2SBG_3V CO2SBG CO2MBG CO2SRF CO2LU CO2_ppm CO2_ppm_prec fCO2_ff
+    
+	# Fossil fuel emission
+    if [ ${lmdz_UserChoices_CARBON_CYCLE} = control ] ; then
+            # For Control, no fossil fuel emission :
+	fCO2_ff=0
+	echo "Fossil Fuel for control run  :" ${fCO2_ff}
+    else
+            # For historical, get the fossile fuel file :
+	fCO2_ff=$( gawk "{if (match(\$0,\"${year}\ *${month}\")) {print \$3}}" ${SUBMIT_DIR}/PARAM/CMIP5_gridcar_CO2_emissions_fossil_fuel_Andres_1751-2007_monthly_SC.txt )
+	echo "Fossil Fuel for historical run  :" ${fCO2_ff}
+    fi
+    
+        # Get the value of ocean carbon flux
+    CO2MBG=$( ${SUBMIT_DIR}/COMP/lmdz_analyse_pisces_out.awk ocean.output )
+    CO2MBG=$( echo ${CO2MBG} | sed -e "s/ *//" )
+    echo "Ocean carbon flux  :" ${CO2MBG}
+    
+        # Get the value of land fluxes
+    set +A CO2SBG_3V -- $( ${SUBMIT_DIR}/COMP/lmdz_analyse_stomate_out.awk out_orchidee_0000 )
+    CO2SRF=$( echo ${CO2SBG_3V[0]} | sed -e "s/ *//" )
+    CO2LU=$( echo ${CO2SBG_3V[1]} | sed -e "s/ *//" )
+    CO2SBG=$( echo ${CO2SBG_3V[2]} | sed -e "s/ *//" )
+    echo "Land carbon flux (NEP)         :" ${CO2SRF}
+    echo "LU flux          (FLUC)        :" ${CO2LU}
+    echo "Total Land carbon flux (NBP)   :" ${CO2SBG}
+    
+        # Previous CO2
+    CO2_ppm_prec=$( echo "${PreviousLinelog[*]}" | gawk -F '|' '{gsub(" ",""); print $4}' )
+    echo "Previous CO2  :" ${CO2_ppm_prec}
+    
+        # Formula
+    CO2_ppm=$( echo "${CO2_ppm_prec} + (${fCO2_ff} + ${CO2MBG} + ${CO2SBG}) / 2.12" | bc -l )
+    echo "New CO2  :" ${CO2_ppm}
+    
+        # Save CO2 values in ExeCpuLog variable contents 5 fields
+    echo "${CumulPeriod} ${PeriodDateBegin} ${PeriodDateEnd} ${CO2_ppm} ${CO2_ppm_prec} ${fCO2_ff} ${CO2MBG} ${CO2SBG} ${CO2LU}" |   \
+	gawk '{printf("  %11d | %15s | %15s | %22.15g | %20.15g | %11.8g | %11.8g | %12.8g | %12.8g \n", \
+                           $1,$2,$3,$4,$5,$6,$7,$8,$9)}' >> ${SUBMIT_DIR}/co2.log
+    
+    IGCM_debug_PopStack "ATM_Carbon_Finalize"
+}
Index: CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/DRIVER/orchidee.driver
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/DRIVER/orchidee.driver	(revision 3559)
+++ CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/DRIVER/orchidee.driver	(revision 3559)
@@ -0,0 +1,162 @@
+#!/bin/ksh
+## Driver for the component SRF corresponding to the sechiba part of ORCHIDEE
+#-----------------------------------------------------------------
+function SRF_Initialize
+{
+    IGCM_debug_PushStack "SRF_Initialize"
+
+    ##- Define variable DefSuffix set in orchidee.card
+    ##  This variable is used in orchidee.card to choose
+    ##  parameter file(orchidee.def_DefSuffix).
+    if [ ! X${orchidee_UserChoices_DefSuffix} = X ] ; then
+        DefSuffix=${orchidee_UserChoices_DefSuffix}
+    else
+        DefSuffix=Choi
+    fi
+
+    IGCM_debug_PopStack "SRF_Initialize"
+}
+
+#-----------------------------------------------------------------
+function SRF_Update
+{
+    IGCM_debug_PushStack "SRF_Update"
+
+    ## 1. Modifications in orchidee.def parameter file
+
+    # Activate STOMATE if the compontent SBG=stomate is set in config.card
+    if [ X${config_ListOfComponents_SBG} = Xstomate ] ; then
+	# Activate stomate in orchidee.def
+        IGCM_comp_modifyDefFile blocker orchidee.def STOMATE_OK_STOMATE y
+    else
+	# Deactivate stomate in orchidee.def
+        IGCM_comp_modifyDefFile blocker orchidee.def STOMATE_OK_STOMATE n
+	# Deactivate output files for stomate
+	IGCM_comp_modifyXmlFile nonblocker file_def_orchidee.xml stomate1 enabled .FALSE.
+	IGCM_comp_modifyXmlFile nonblocker file_def_orchidee.xml stomate1 output_freq 1mo
+        IGCM_comp_modifyXmlFile nonblocker file_def_orchidee.xml stomate2 enabled .FALSE.
+	IGCM_comp_modifyXmlFile nonblocker file_def_orchidee.xml stomate2 output_freq 1mo
+    fi
+
+    # Define in orchidee.def if restart file should be used
+    if ( [ ${CumulPeriod} -ne 1 ] || [ "${config_SRF_Restart}" != "n" ] ) ; then
+        IGCM_comp_modifyDefFile blocker orchidee.def SECHIBA_restart_in sechiba_rest_in.nc
+    else
+        IGCM_comp_modifyDefFile blocker orchidee.def SECHIBA_restart_in NONE
+    fi
+
+    # Modify in orchidee.def VEGET_UPDATE if it is set in orchidee.card section UserChoices
+    if [ ! X${orchidee_UserChoices_VEGET_UPDATE} = X ] ; then
+        IGCM_comp_modifyDefFile nonblocker orchidee.def VEGET_UPDATE   ${orchidee_UserChoices_VEGET_UPDATE}
+    else
+        IGCM_comp_modifyDefFile nonblocker orchidee.def VEGET_UPDATE 0Y
+    fi
+
+    # Activate creation of river description file only for the first period
+    if [ ${CumulPeriod} -eq 1 ] ; then
+        IGCM_comp_modifyDefFile nonblocker orchidee.def RIVER_DESC y
+    else
+        IGCM_comp_modifyDefFile nonblocker orchidee.def RIVER_DESC n
+    fi
+
+
+    ## 2. Mangement of output and modifications of related xml files
+
+    # Set default values for sechiba1_enabled and sechiba1_freq.
+    # These variables are used only to modify file_def_orchidee.xml
+    sechiba1_enabled=.FALSE.
+    sechiba2_enabled=.FALSE.
+    sechiba1_freq=0s
+    sechiba2_freq=0s
+
+
+    # Get WriteFrenquecy for SRF (SECHIBA) from config.card
+    # 1 or 2 frequencies can be set in WriteFrenquecy for SRF
+    # The first frequency will always be used for the sechiba_history file and the 
+    # second frequency will be used for the sechiba_out_2.nc file. 
+    # The files are activated only if its corresponding frequency is set in WriteFrequency
+    ifreq=0
+    for frequency in ${config_SRF_WriteFrequency} ; do
+	case ${frequency} in
+	    *Y|*y) 
+		NbYears=$( echo ${frequency} | awk -F '[yY]' '{print $1}' )
+		NbDaysYear=$( IGCM_date_DaysInYear ${year} )
+		file_enabled=.TRUE.
+		file_freq=${NbYears}y ;;
+	    *M|*m)
+		NbMonths=$( echo ${frequency} | awk -F '[mM]' '{print $1}' )
+		file_enabled=.TRUE.
+		file_freq=${NbMonths}mo ;;
+	    *D|*d)
+		NbDays=$( echo ${frequency} | awk -F '[dD]' '{print $1}' )
+		file_enabled=.TRUE.
+		file_freq=${NbDays}d ;;
+	    *s)
+		WriteInSeconds=$( echo ${frequency} | awk -F '[s]' '{print $1}' )
+		file_enabled=.TRUE.
+		file_freq=${WriteInSeconds}s ;;
+            HF|hf) 
+		file_enabled=.TRUE. 
+		file_freq=10800s ;;
+	    *) 
+		IGCM_debug_Exit "SRF_Update " ${frequency} " invalid WriteFrequency : choose in xY, xM, xD, xs and HF" 
+		IGCM_debug_Verif_Exit ;;
+	esac
+
+	(( ifreq = ifreq + 1 ))
+	case ${ifreq} in
+	    1)
+		sechiba1_enabled=${file_enabled}
+		sechiba1_freq=${file_freq} ;;
+	    2)
+		sechiba2_enabled=${file_enabled}
+		sechiba2_freq=${file_freq} ;;
+        *)
+		IGCM_debug_Exit "SRF_Update: It is not possible to set more than 2 output files for sechiba from config.card"
+		IGCM_debug_Exit "You must correct WriteFrequancy in SRF secion in config.card."
+		IGCM_debug_Exit "Adapt file_def_orchidee.xml directly if you want more output files"
+		IGCM_debug_Verif_Exit ;;
+	esac
+    done
+
+
+    # Modify file_def_orchidee.xml file
+    IGCM_comp_modifyXmlFile nonblocker file_def_orchidee.xml sechiba1 enabled ${sechiba1_enabled}
+    IGCM_comp_modifyXmlFile nonblocker file_def_orchidee.xml sechiba1 output_freq ${sechiba1_freq}
+    IGCM_comp_modifyXmlFile nonblocker file_def_orchidee.xml sechiba2 enabled ${sechiba2_enabled}
+    IGCM_comp_modifyXmlFile nonblocker file_def_orchidee.xml sechiba2 output_freq ${sechiba2_freq}
+    
+
+    # Add include of orchidee context in iodef.xml
+    # In iodef.xml add on next line after "COMPONENT CONTEXT"
+    #  <context id="orchidee" src="./context_orchidee.xml"/>
+    echo '<context id="orchidee" src="./context_orchidee.xml"/>' > add.tmp
+    cp iodef.xml iodef.xml.tmp
+    sed -e "/COMPONENT CONTEXT/r add.tmp" iodef.xml.tmp > iodef.xml
+    rm iodef.xml.tmp add.tmp
+
+    # Add LongName as global attribute in XIOS output files (if LongName is not empty)
+    if [ ! "X${config_UserChoices_LongName}" = "X" ] ; then
+	listfile=$(ls file_def*orchidee.xml)
+	echo "<variable id=\"LongName\" type=\"string\">${config_UserChoices_LongName}</variable>" > add.tmp
+	for file in ${listfile}
+	do
+	    cp ${file} ${file}.tmp
+	    sed -e "/<file id/r add.tmp" \
+		${file}.tmp > ${file}
+	    rm ${file}.tmp 
+	done 
+	rm add.tmp
+    fi
+
+
+    IGCM_debug_PopStack "SRF_Update"
+}
+
+#-----------------------------------------------------------------
+function SRF_Finalize
+{
+    IGCM_debug_PushStack "SRF_Finalize"
+
+    IGCM_debug_PopStack "SRF_Finalize"
+}
Index: CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/DRIVER/reprobus.driver
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/DRIVER/reprobus.driver	(revision 3559)
+++ CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/DRIVER/reprobus.driver	(revision 3559)
@@ -0,0 +1,24 @@
+#!/bin/ksh
+##-----------------------------------------------------------------
+function CHS_Initialize
+{
+    IGCM_debug_PushStack "CHS_Initialize"
+
+    IGCM_debug_PopStack "CHS_Initialize"
+}
+
+##-----------------------------------------------------------------
+function CHS_Update
+{
+    IGCM_debug_PushStack "CHS_Update"
+
+    IGCM_debug_PopStack "CHS_Update"
+}
+
+#-----------------------------------
+function CHS_Finalize
+{
+    IGCM_debug_PushStack "CHS_Finalize"
+
+    IGCM_debug_PopStack "CHS_Finalize"
+}
Index: CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/DRIVER/stomate.driver
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/DRIVER/stomate.driver	(revision 3559)
+++ CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/DRIVER/stomate.driver	(revision 3559)
@@ -0,0 +1,71 @@
+#!/bin/ksh
+
+#D- Driver pour ORCHIDEE stomate component
+
+#-----------------------------------------------------------------
+function SBG_Initialize
+{
+    IGCM_debug_PushStack "SBG_Initialize"
+
+    IGCM_debug_PopStack "SBG_Initialize"
+}
+
+#-----------------------------------------------------------------
+function SBG_Update
+{
+    IGCM_debug_PushStack "SBG_Update"
+    
+    # Output management
+
+    # Set default values for stomate output files.
+    stomate_enabled=.FALSE.
+    stomate_freq=0s
+
+    # Read WriteFrequency set in config.card section SBG. 
+    # Only one choice can be set as WriteFrequency. The same choice will be used for 
+    # both stomate_history and stomate_ipcc_history files. 
+    for frequency in ${config_SBG_WriteFrequency} ; do
+	case ${frequency} in
+	    *Y|*y) 
+		NbYears=$( echo ${frequency} | awk -F '[yY]' '{print $1}' )
+		NbDaysYear=$( IGCM_date_DaysInYear ${year} )
+		stomate_enabled=.TRUE.
+		stomate_freq=${NbYears}y ;;
+	    *M|*m) 
+		NbMonths=$( echo ${frequency} | awk -F '[mM]' '{print $1}' )
+		stomate_enabled=.TRUE.
+		stomate_freq=${NbMonths}mo ;;
+	    *D|*d)
+		NbDays=$( echo ${frequency} | awk -F '[dD]' '{print $1}' )
+		stomate_enabled=.TRUE.
+		stomate_freq=${NbDays}d ;;
+	    *) 
+		IGCM_debug_Exit "SBG WriteFrequency=${frequency} is invalid. Choose between xY, xM and xD for Stomate." ;;
+	esac
+    done
+
+    # Modify file_def_orchidee.xml
+    IGCM_comp_modifyXmlFile nonblocker file_def_orchidee.xml stomate1 enabled ${stomate_enabled}
+    IGCM_comp_modifyXmlFile nonblocker file_def_orchidee.xml stomate1 output_freq ${stomate_freq}
+    IGCM_comp_modifyXmlFile nonblocker file_def_orchidee.xml stomate2 enabled ${stomate_enabled}
+    IGCM_comp_modifyXmlFile nonblocker file_def_orchidee.xml stomate2 output_freq ${stomate_freq}
+    
+
+    # Define in orchidee.def if restart file should be used
+    if ( [ ${CumulPeriod} -eq 1 ] && [ "${config_SBG_Restart}" = "n" ] ) ; then
+        echo "STOMATE : without restart"
+        IGCM_comp_modifyDefFile blocker orchidee.def STOMATE_RESTART_FILEIN NONE
+    else
+        IGCM_comp_modifyDefFile blocker orchidee.def STOMATE_RESTART_FILEIN stomate_rest_in.nc
+    fi
+
+    IGCM_debug_PopStack "SBG_Update"
+}
+
+#-----------------------------------------------------------------
+function SBG_Finalize
+{
+    IGCM_debug_PushStack "SBG_Finalize"
+    
+    IGCM_debug_PopStack "SBG_Finalize"
+}
Index: CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/DRIVER/xios.driver
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/DRIVER/xios.driver	(revision 3559)
+++ CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/DRIVER/xios.driver	(revision 3559)
@@ -0,0 +1,37 @@
+#!/bin/ksh
+#-----------------------------------
+function IOS_Initialize
+{ 
+    IGCM_debug_PushStack "IOS_Initialize"
+
+    echo INITIALIZE IOS !!!
+
+    IGCM_debug_PopStack "IOS_Initialize"
+}
+
+#-----------------------------------
+function IOS_Update
+{
+    IGCM_debug_PushStack "IOS_Update"
+
+    echo UPDATE IOS !!!
+# Activate server mode
+    IGCM_comp_modifyXmlFile force iodef.xml using_server NONE true
+
+    if [ -f namcouple ] ; then
+	sed -e "s/2  LMDZ oceanx/3 LMDZ oceanx ${config_Executable_IOS[1]}/" namcouple > namcouple.tmp 
+	IGCM_sys_Mv namcouple.tmp namcouple
+    fi
+
+    IGCM_debug_PopStack "IOS_Update"
+}
+
+#-----------------------------------
+function IOS_Finalize
+{
+    IGCM_debug_PushStack "IOS_Finalize"
+
+    echo FINALIZE IOS !!!
+
+    IGCM_debug_PopStack "IOS_Finalize"
+}
Index: CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/CMIP5_gridcar_CO2_emissions_fossil_fuel_Andres_1751-2007_monthly_SC.txt
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/CMIP5_gridcar_CO2_emissions_fossil_fuel_Andres_1751-2007_monthly_SC.txt	(revision 3559)
+++ CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/CMIP5_gridcar_CO2_emissions_fossil_fuel_Andres_1751-2007_monthly_SC.txt	(revision 3559)
@@ -0,0 +1,3085 @@
+year    month  gridsum (PgC/mth)
+1751    01     0.00021
+1751    02     0.00021
+1751    03     0.00021
+1751    04     0.00021
+1751    05     0.00021
+1751    06     0.00021
+1751    07     0.00021
+1751    08     0.00021
+1751    09     0.00021
+1751    10     0.00021
+1751    11     0.00021
+1751    12     0.00021
+1752    01     0.00021
+1752    02     0.00021
+1752    03     0.00021
+1752    04     0.00021
+1752    05     0.00021
+1752    06     0.00021
+1752    07     0.00021
+1752    08     0.00021
+1752    09     0.00021
+1752    10     0.00021
+1752    11     0.00021
+1752    12     0.00021
+1753    01     0.00021
+1753    02     0.00021
+1753    03     0.00021
+1753    04     0.00021
+1753    05     0.00021
+1753    06     0.00021
+1753    07     0.00021
+1753    08     0.00021
+1753    09     0.00021
+1753    10     0.00021
+1753    11     0.00021
+1753    12     0.00021
+1754    01     0.00021
+1754    02     0.00021
+1754    03     0.00021
+1754    04     0.00021
+1754    05     0.00021
+1754    06     0.00021
+1754    07     0.00021
+1754    08     0.00021
+1754    09     0.00021
+1754    10     0.00021
+1754    11     0.00021
+1754    12     0.00021
+1755    01     0.00021
+1755    02     0.00021
+1755    03     0.00021
+1755    04     0.00021
+1755    05     0.00021
+1755    06     0.00021
+1755    07     0.00021
+1755    08     0.00021
+1755    09     0.00021
+1755    10     0.00021
+1755    11     0.00021
+1755    12     0.00021
+1756    01     0.00023
+1756    02     0.00023
+1756    03     0.00023
+1756    04     0.00023
+1756    05     0.00023
+1756    06     0.00023
+1756    07     0.00023
+1756    08     0.00023
+1756    09     0.00023
+1756    10     0.00023
+1756    11     0.00023
+1756    12     0.00023
+1757    01     0.00023
+1757    02     0.00023
+1757    03     0.00023
+1757    04     0.00023
+1757    05     0.00023
+1757    06     0.00023
+1757    07     0.00023
+1757    08     0.00023
+1757    09     0.00023
+1757    10     0.00023
+1757    11     0.00023
+1757    12     0.00023
+1758    01     0.00023
+1758    02     0.00023
+1758    03     0.00023
+1758    04     0.00023
+1758    05     0.00023
+1758    06     0.00023
+1758    07     0.00023
+1758    08     0.00023
+1758    09     0.00023
+1758    10     0.00023
+1758    11     0.00023
+1758    12     0.00023
+1759    01     0.00023
+1759    02     0.00023
+1759    03     0.00023
+1759    04     0.00023
+1759    05     0.00023
+1759    06     0.00023
+1759    07     0.00023
+1759    08     0.00023
+1759    09     0.00023
+1759    10     0.00023
+1759    11     0.00023
+1759    12     0.00023
+1760    01     0.00023
+1760    02     0.00023
+1760    03     0.00023
+1760    04     0.00023
+1760    05     0.00023
+1760    06     0.00023
+1760    07     0.00023
+1760    08     0.00023
+1760    09     0.00023
+1760    10     0.00023
+1760    11     0.00023
+1760    12     0.00023
+1761    01     0.00025
+1761    02     0.00025
+1761    03     0.00025
+1761    04     0.00025
+1761    05     0.00025
+1761    06     0.00025
+1761    07     0.00025
+1761    08     0.00025
+1761    09     0.00025
+1761    10     0.00025
+1761    11     0.00025
+1761    12     0.00025
+1762    01     0.00025
+1762    02     0.00025
+1762    03     0.00025
+1762    04     0.00025
+1762    05     0.00025
+1762    06     0.00025
+1762    07     0.00025
+1762    08     0.00025
+1762    09     0.00025
+1762    10     0.00025
+1762    11     0.00025
+1762    12     0.00025
+1763    01     0.00025
+1763    02     0.00025
+1763    03     0.00025
+1763    04     0.00025
+1763    05     0.00025
+1763    06     0.00025
+1763    07     0.00025
+1763    08     0.00025
+1763    09     0.00025
+1763    10     0.00025
+1763    11     0.00025
+1763    12     0.00025
+1764    01     0.00025
+1764    02     0.00025
+1764    03     0.00025
+1764    04     0.00025
+1764    05     0.00025
+1764    06     0.00025
+1764    07     0.00025
+1764    08     0.00025
+1764    09     0.00025
+1764    10     0.00025
+1764    11     0.00025
+1764    12     0.00025
+1765    01     0.00025
+1765    02     0.00025
+1765    03     0.00025
+1765    04     0.00025
+1765    05     0.00025
+1765    06     0.00025
+1765    07     0.00025
+1765    08     0.00025
+1765    09     0.00025
+1765    10     0.00025
+1765    11     0.00025
+1765    12     0.00025
+1766    01     0.00028
+1766    02     0.00028
+1766    03     0.00028
+1766    04     0.00028
+1766    05     0.00028
+1766    06     0.00028
+1766    07     0.00028
+1766    08     0.00028
+1766    09     0.00028
+1766    10     0.00028
+1766    11     0.00028
+1766    12     0.00028
+1767    01     0.00028
+1767    02     0.00028
+1767    03     0.00028
+1767    04     0.00028
+1767    05     0.00028
+1767    06     0.00028
+1767    07     0.00028
+1767    08     0.00028
+1767    09     0.00028
+1767    10     0.00028
+1767    11     0.00028
+1767    12     0.00028
+1768    01     0.00028
+1768    02     0.00028
+1768    03     0.00028
+1768    04     0.00028
+1768    05     0.00028
+1768    06     0.00028
+1768    07     0.00028
+1768    08     0.00028
+1768    09     0.00028
+1768    10     0.00028
+1768    11     0.00028
+1768    12     0.00028
+1769    01     0.00028
+1769    02     0.00028
+1769    03     0.00028
+1769    04     0.00028
+1769    05     0.00028
+1769    06     0.00028
+1769    07     0.00028
+1769    08     0.00028
+1769    09     0.00028
+1769    10     0.00028
+1769    11     0.00028
+1769    12     0.00028
+1770    01     0.00028
+1770    02     0.00028
+1770    03     0.00028
+1770    04     0.00028
+1770    05     0.00028
+1770    06     0.00028
+1770    07     0.00028
+1770    08     0.00028
+1770    09     0.00028
+1770    10     0.00028
+1770    11     0.00028
+1770    12     0.00028
+1771    01     0.00031
+1771    02     0.00031
+1771    03     0.00031
+1771    04     0.00031
+1771    05     0.00031
+1771    06     0.00031
+1771    07     0.00031
+1771    08     0.00031
+1771    09     0.00031
+1771    10     0.00031
+1771    11     0.00031
+1771    12     0.00031
+1772    01     0.00031
+1772    02     0.00031
+1772    03     0.00031
+1772    04     0.00031
+1772    05     0.00031
+1772    06     0.00031
+1772    07     0.00031
+1772    08     0.00031
+1772    09     0.00031
+1772    10     0.00031
+1772    11     0.00031
+1772    12     0.00031
+1773    01     0.00031
+1773    02     0.00031
+1773    03     0.00031
+1773    04     0.00031
+1773    05     0.00031
+1773    06     0.00031
+1773    07     0.00031
+1773    08     0.00031
+1773    09     0.00031
+1773    10     0.00031
+1773    11     0.00031
+1773    12     0.00031
+1774    01     0.00031
+1774    02     0.00031
+1774    03     0.00031
+1774    04     0.00031
+1774    05     0.00031
+1774    06     0.00031
+1774    07     0.00031
+1774    08     0.00031
+1774    09     0.00031
+1774    10     0.00031
+1774    11     0.00031
+1774    12     0.00031
+1775    01     0.00031
+1775    02     0.00031
+1775    03     0.00031
+1775    04     0.00031
+1775    05     0.00031
+1775    06     0.00031
+1775    07     0.00031
+1775    08     0.00031
+1775    09     0.00031
+1775    10     0.00031
+1775    11     0.00031
+1775    12     0.00031
+1776    01     0.00034
+1776    02     0.00034
+1776    03     0.00034
+1776    04     0.00034
+1776    05     0.00034
+1776    06     0.00034
+1776    07     0.00034
+1776    08     0.00034
+1776    09     0.00034
+1776    10     0.00034
+1776    11     0.00034
+1776    12     0.00034
+1777    01     0.00034
+1777    02     0.00034
+1777    03     0.00034
+1777    04     0.00034
+1777    05     0.00034
+1777    06     0.00034
+1777    07     0.00034
+1777    08     0.00034
+1777    09     0.00034
+1777    10     0.00034
+1777    11     0.00034
+1777    12     0.00034
+1778    01     0.00034
+1778    02     0.00034
+1778    03     0.00034
+1778    04     0.00034
+1778    05     0.00034
+1778    06     0.00034
+1778    07     0.00034
+1778    08     0.00034
+1778    09     0.00034
+1778    10     0.00034
+1778    11     0.00034
+1778    12     0.00034
+1779    01     0.00034
+1779    02     0.00034
+1779    03     0.00034
+1779    04     0.00034
+1779    05     0.00034
+1779    06     0.00034
+1779    07     0.00034
+1779    08     0.00034
+1779    09     0.00034
+1779    10     0.00034
+1779    11     0.00034
+1779    12     0.00034
+1780    01     0.00034
+1780    02     0.00034
+1780    03     0.00034
+1780    04     0.00034
+1780    05     0.00034
+1780    06     0.00034
+1780    07     0.00034
+1780    08     0.00034
+1780    09     0.00034
+1780    10     0.00034
+1780    11     0.00034
+1780    12     0.00034
+1781    01     0.00038
+1781    02     0.00038
+1781    03     0.00038
+1781    04     0.00038
+1781    05     0.00038
+1781    06     0.00038
+1781    07     0.00038
+1781    08     0.00038
+1781    09     0.00038
+1781    10     0.00038
+1781    11     0.00038
+1781    12     0.00038
+1782    01     0.00038
+1782    02     0.00038
+1782    03     0.00038
+1782    04     0.00038
+1782    05     0.00038
+1782    06     0.00038
+1782    07     0.00038
+1782    08     0.00038
+1782    09     0.00038
+1782    10     0.00038
+1782    11     0.00038
+1782    12     0.00038
+1783    01     0.00038
+1783    02     0.00038
+1783    03     0.00038
+1783    04     0.00038
+1783    05     0.00038
+1783    06     0.00038
+1783    07     0.00038
+1783    08     0.00038
+1783    09     0.00038
+1783    10     0.00038
+1783    11     0.00038
+1783    12     0.00038
+1784    01     0.00038
+1784    02     0.00038
+1784    03     0.00038
+1784    04     0.00038
+1784    05     0.00038
+1784    06     0.00038
+1784    07     0.00038
+1784    08     0.00038
+1784    09     0.00038
+1784    10     0.00038
+1784    11     0.00038
+1784    12     0.00038
+1785    01     0.00038
+1785    02     0.00038
+1785    03     0.00038
+1785    04     0.00038
+1785    05     0.00038
+1785    06     0.00038
+1785    07     0.00038
+1785    08     0.00038
+1785    09     0.00038
+1785    10     0.00038
+1785    11     0.00038
+1785    12     0.00038
+1786    01     0.00044
+1786    02     0.00044
+1786    03     0.00044
+1786    04     0.00044
+1786    05     0.00044
+1786    06     0.00044
+1786    07     0.00044
+1786    08     0.00044
+1786    09     0.00044
+1786    10     0.00044
+1786    11     0.00044
+1786    12     0.00044
+1787    01     0.00044
+1787    02     0.00044
+1787    03     0.00044
+1787    04     0.00044
+1787    05     0.00044
+1787    06     0.00044
+1787    07     0.00044
+1787    08     0.00044
+1787    09     0.00044
+1787    10     0.00044
+1787    11     0.00044
+1787    12     0.00044
+1788    01     0.00044
+1788    02     0.00044
+1788    03     0.00044
+1788    04     0.00044
+1788    05     0.00044
+1788    06     0.00044
+1788    07     0.00044
+1788    08     0.00044
+1788    09     0.00044
+1788    10     0.00044
+1788    11     0.00044
+1788    12     0.00044
+1789    01     0.00044
+1789    02     0.00044
+1789    03     0.00044
+1789    04     0.00044
+1789    05     0.00044
+1789    06     0.00044
+1789    07     0.00044
+1789    08     0.00044
+1789    09     0.00044
+1789    10     0.00044
+1789    11     0.00044
+1789    12     0.00044
+1790    01     0.00044
+1790    02     0.00044
+1790    03     0.00044
+1790    04     0.00044
+1790    05     0.00044
+1790    06     0.00044
+1790    07     0.00044
+1790    08     0.00044
+1790    09     0.00044
+1790    10     0.00044
+1790    11     0.00044
+1790    12     0.00044
+1791    01     0.00049
+1791    02     0.00049
+1791    03     0.00049
+1791    04     0.00049
+1791    05     0.00049
+1791    06     0.00049
+1791    07     0.00049
+1791    08     0.00049
+1791    09     0.00049
+1791    10     0.00049
+1791    11     0.00049
+1791    12     0.00049
+1792    01     0.00050
+1792    02     0.00050
+1792    03     0.00050
+1792    04     0.00050
+1792    05     0.00050
+1792    06     0.00050
+1792    07     0.00050
+1792    08     0.00050
+1792    09     0.00050
+1792    10     0.00050
+1792    11     0.00050
+1792    12     0.00050
+1793    01     0.00050
+1793    02     0.00050
+1793    03     0.00050
+1793    04     0.00050
+1793    05     0.00050
+1793    06     0.00050
+1793    07     0.00050
+1793    08     0.00050
+1793    09     0.00050
+1793    10     0.00050
+1793    11     0.00050
+1793    12     0.00050
+1794    01     0.00050
+1794    02     0.00050
+1794    03     0.00050
+1794    04     0.00050
+1794    05     0.00050
+1794    06     0.00050
+1794    07     0.00050
+1794    08     0.00050
+1794    09     0.00050
+1794    10     0.00050
+1794    11     0.00050
+1794    12     0.00050
+1795    01     0.00050
+1795    02     0.00050
+1795    03     0.00050
+1795    04     0.00050
+1795    05     0.00050
+1795    06     0.00050
+1795    07     0.00050
+1795    08     0.00050
+1795    09     0.00050
+1795    10     0.00050
+1795    11     0.00050
+1795    12     0.00050
+1796    01     0.00052
+1796    02     0.00052
+1796    03     0.00052
+1796    04     0.00052
+1796    05     0.00052
+1796    06     0.00052
+1796    07     0.00052
+1796    08     0.00052
+1796    09     0.00052
+1796    10     0.00052
+1796    11     0.00052
+1796    12     0.00052
+1797    01     0.00055
+1797    02     0.00055
+1797    03     0.00055
+1797    04     0.00055
+1797    05     0.00055
+1797    06     0.00055
+1797    07     0.00055
+1797    08     0.00055
+1797    09     0.00055
+1797    10     0.00055
+1797    11     0.00055
+1797    12     0.00055
+1798    01     0.00057
+1798    02     0.00057
+1798    03     0.00057
+1798    04     0.00057
+1798    05     0.00057
+1798    06     0.00057
+1798    07     0.00057
+1798    08     0.00057
+1798    09     0.00057
+1798    10     0.00057
+1798    11     0.00057
+1798    12     0.00057
+1799    01     0.00060
+1799    02     0.00060
+1799    03     0.00060
+1799    04     0.00060
+1799    05     0.00060
+1799    06     0.00060
+1799    07     0.00060
+1799    08     0.00060
+1799    09     0.00060
+1799    10     0.00060
+1799    11     0.00060
+1799    12     0.00060
+1800    01     0.00064
+1800    02     0.00064
+1800    03     0.00064
+1800    04     0.00064
+1800    05     0.00064
+1800    06     0.00064
+1800    07     0.00064
+1800    08     0.00064
+1800    09     0.00064
+1800    10     0.00064
+1800    11     0.00064
+1800    12     0.00064
+1801    01     0.00064
+1801    02     0.00064
+1801    03     0.00064
+1801    04     0.00064
+1801    05     0.00064
+1801    06     0.00064
+1801    07     0.00064
+1801    08     0.00064
+1801    09     0.00064
+1801    10     0.00064
+1801    11     0.00064
+1801    12     0.00064
+1802    01     0.00084
+1802    02     0.00084
+1802    03     0.00084
+1802    04     0.00084
+1802    05     0.00084
+1802    06     0.00084
+1802    07     0.00084
+1802    08     0.00084
+1802    09     0.00084
+1802    10     0.00084
+1802    11     0.00084
+1802    12     0.00084
+1803    01     0.00072
+1803    02     0.00072
+1803    03     0.00072
+1803    04     0.00072
+1803    05     0.00072
+1803    06     0.00072
+1803    07     0.00072
+1803    08     0.00072
+1803    09     0.00072
+1803    10     0.00072
+1803    11     0.00072
+1803    12     0.00072
+1804    01     0.00078
+1804    02     0.00078
+1804    03     0.00078
+1804    04     0.00078
+1804    05     0.00078
+1804    06     0.00078
+1804    07     0.00078
+1804    08     0.00078
+1804    09     0.00078
+1804    10     0.00078
+1804    11     0.00078
+1804    12     0.00078
+1805    01     0.00076
+1805    02     0.00076
+1805    03     0.00076
+1805    04     0.00076
+1805    05     0.00076
+1805    06     0.00076
+1805    07     0.00076
+1805    08     0.00076
+1805    09     0.00076
+1805    10     0.00076
+1805    11     0.00076
+1805    12     0.00076
+1806    01     0.00080
+1806    02     0.00080
+1806    03     0.00080
+1806    04     0.00080
+1806    05     0.00080
+1806    06     0.00080
+1806    07     0.00080
+1806    08     0.00080
+1806    09     0.00080
+1806    10     0.00080
+1806    11     0.00080
+1806    12     0.00080
+1807    01     0.00084
+1807    02     0.00084
+1807    03     0.00084
+1807    04     0.00084
+1807    05     0.00084
+1807    06     0.00084
+1807    07     0.00084
+1807    08     0.00084
+1807    09     0.00084
+1807    10     0.00084
+1807    11     0.00084
+1807    12     0.00084
+1808    01     0.00080
+1808    02     0.00080
+1808    03     0.00080
+1808    04     0.00080
+1808    05     0.00080
+1808    06     0.00080
+1808    07     0.00080
+1808    08     0.00080
+1808    09     0.00080
+1808    10     0.00080
+1808    11     0.00080
+1808    12     0.00080
+1809    01     0.00080
+1809    02     0.00080
+1809    03     0.00080
+1809    04     0.00080
+1809    05     0.00080
+1809    06     0.00080
+1809    07     0.00080
+1809    08     0.00080
+1809    09     0.00080
+1809    10     0.00080
+1809    11     0.00080
+1809    12     0.00080
+1810    01     0.00085
+1810    02     0.00085
+1810    03     0.00085
+1810    04     0.00085
+1810    05     0.00085
+1810    06     0.00085
+1810    07     0.00085
+1810    08     0.00085
+1810    09     0.00085
+1810    10     0.00085
+1810    11     0.00085
+1810    12     0.00085
+1811    01     0.00090
+1811    02     0.00090
+1811    03     0.00090
+1811    04     0.00090
+1811    05     0.00090
+1811    06     0.00090
+1811    07     0.00090
+1811    08     0.00090
+1811    09     0.00090
+1811    10     0.00090
+1811    11     0.00090
+1811    12     0.00090
+1812    01     0.00093
+1812    02     0.00093
+1812    03     0.00093
+1812    04     0.00093
+1812    05     0.00093
+1812    06     0.00093
+1812    07     0.00093
+1812    08     0.00093
+1812    09     0.00093
+1812    10     0.00093
+1812    11     0.00093
+1812    12     0.00093
+1813    01     0.00094
+1813    02     0.00094
+1813    03     0.00094
+1813    04     0.00094
+1813    05     0.00094
+1813    06     0.00094
+1813    07     0.00094
+1813    08     0.00094
+1813    09     0.00094
+1813    10     0.00094
+1813    11     0.00094
+1813    12     0.00094
+1814    01     0.00096
+1814    02     0.00096
+1814    03     0.00096
+1814    04     0.00096
+1814    05     0.00096
+1814    06     0.00096
+1814    07     0.00096
+1814    08     0.00096
+1814    09     0.00096
+1814    10     0.00096
+1814    11     0.00096
+1814    12     0.00096
+1815    01     0.00099
+1815    02     0.00099
+1815    03     0.00099
+1815    04     0.00099
+1815    05     0.00099
+1815    06     0.00099
+1815    07     0.00099
+1815    08     0.00099
+1815    09     0.00099
+1815    10     0.00099
+1815    11     0.00099
+1815    12     0.00099
+1816    01     0.00108
+1816    02     0.00108
+1816    03     0.00108
+1816    04     0.00108
+1816    05     0.00108
+1816    06     0.00108
+1816    07     0.00108
+1816    08     0.00108
+1816    09     0.00108
+1816    10     0.00108
+1816    11     0.00108
+1816    12     0.00108
+1817    01     0.00112
+1817    02     0.00112
+1817    03     0.00112
+1817    04     0.00112
+1817    05     0.00112
+1817    06     0.00112
+1817    07     0.00112
+1817    08     0.00112
+1817    09     0.00112
+1817    10     0.00112
+1817    11     0.00112
+1817    12     0.00112
+1818    01     0.00113
+1818    02     0.00113
+1818    03     0.00113
+1818    04     0.00113
+1818    05     0.00113
+1818    06     0.00113
+1818    07     0.00113
+1818    08     0.00113
+1818    09     0.00113
+1818    10     0.00113
+1818    11     0.00113
+1818    12     0.00113
+1819    01     0.00114
+1819    02     0.00114
+1819    03     0.00114
+1819    04     0.00114
+1819    05     0.00114
+1819    06     0.00114
+1819    07     0.00114
+1819    08     0.00114
+1819    09     0.00114
+1819    10     0.00114
+1819    11     0.00114
+1819    12     0.00114
+1820    01     0.00115
+1820    02     0.00115
+1820    03     0.00115
+1820    04     0.00115
+1820    05     0.00115
+1820    06     0.00115
+1820    07     0.00115
+1820    08     0.00115
+1820    09     0.00115
+1820    10     0.00115
+1820    11     0.00115
+1820    12     0.00115
+1821    01     0.00117
+1821    02     0.00117
+1821    03     0.00117
+1821    04     0.00117
+1821    05     0.00117
+1821    06     0.00117
+1821    07     0.00117
+1821    08     0.00117
+1821    09     0.00117
+1821    10     0.00117
+1821    11     0.00117
+1821    12     0.00117
+1822    01     0.00122
+1822    02     0.00122
+1822    03     0.00122
+1822    04     0.00122
+1822    05     0.00122
+1822    06     0.00122
+1822    07     0.00122
+1822    08     0.00122
+1822    09     0.00122
+1822    10     0.00122
+1822    11     0.00122
+1822    12     0.00122
+1823    01     0.00129
+1823    02     0.00129
+1823    03     0.00129
+1823    04     0.00129
+1823    05     0.00129
+1823    06     0.00129
+1823    07     0.00129
+1823    08     0.00129
+1823    09     0.00129
+1823    10     0.00129
+1823    11     0.00129
+1823    12     0.00129
+1824    01     0.00133
+1824    02     0.00133
+1824    03     0.00133
+1824    04     0.00133
+1824    05     0.00133
+1824    06     0.00133
+1824    07     0.00133
+1824    08     0.00133
+1824    09     0.00133
+1824    10     0.00133
+1824    11     0.00133
+1824    12     0.00133
+1825    01     0.00138
+1825    02     0.00138
+1825    03     0.00138
+1825    04     0.00138
+1825    05     0.00138
+1825    06     0.00138
+1825    07     0.00138
+1825    08     0.00138
+1825    09     0.00138
+1825    10     0.00138
+1825    11     0.00138
+1825    12     0.00138
+1826    01     0.00140
+1826    02     0.00140
+1826    03     0.00140
+1826    04     0.00140
+1826    05     0.00140
+1826    06     0.00140
+1826    07     0.00140
+1826    08     0.00140
+1826    09     0.00140
+1826    10     0.00140
+1826    11     0.00140
+1826    12     0.00140
+1827    01     0.00150
+1827    02     0.00150
+1827    03     0.00150
+1827    04     0.00150
+1827    05     0.00150
+1827    06     0.00150
+1827    07     0.00150
+1827    08     0.00150
+1827    09     0.00150
+1827    10     0.00150
+1827    11     0.00150
+1827    12     0.00150
+1828    01     0.00152
+1828    02     0.00152
+1828    03     0.00152
+1828    04     0.00152
+1828    05     0.00152
+1828    06     0.00152
+1828    07     0.00152
+1828    08     0.00152
+1828    09     0.00152
+1828    10     0.00152
+1828    11     0.00152
+1828    12     0.00152
+1829    01     0.00151
+1829    02     0.00151
+1829    03     0.00151
+1829    04     0.00151
+1829    05     0.00151
+1829    06     0.00151
+1829    07     0.00151
+1829    08     0.00151
+1829    09     0.00151
+1829    10     0.00151
+1829    11     0.00151
+1829    12     0.00151
+1830    01     0.00203
+1830    02     0.00203
+1830    03     0.00203
+1830    04     0.00203
+1830    05     0.00203
+1830    06     0.00203
+1830    07     0.00203
+1830    08     0.00203
+1830    09     0.00203
+1830    10     0.00203
+1830    11     0.00203
+1830    12     0.00203
+1831    01     0.00192
+1831    02     0.00192
+1831    03     0.00192
+1831    04     0.00192
+1831    05     0.00192
+1831    06     0.00192
+1831    07     0.00192
+1831    08     0.00192
+1831    09     0.00192
+1831    10     0.00192
+1831    11     0.00192
+1831    12     0.00192
+1832    01     0.00194
+1832    02     0.00194
+1832    03     0.00194
+1832    04     0.00194
+1832    05     0.00194
+1832    06     0.00194
+1832    07     0.00194
+1832    08     0.00194
+1832    09     0.00194
+1832    10     0.00194
+1832    11     0.00194
+1832    12     0.00194
+1833    01     0.00197
+1833    02     0.00197
+1833    03     0.00197
+1833    04     0.00197
+1833    05     0.00197
+1833    06     0.00197
+1833    07     0.00197
+1833    08     0.00197
+1833    09     0.00197
+1833    10     0.00197
+1833    11     0.00197
+1833    12     0.00197
+1834    01     0.00201
+1834    02     0.00201
+1834    03     0.00201
+1834    04     0.00201
+1834    05     0.00201
+1834    06     0.00201
+1834    07     0.00201
+1834    08     0.00201
+1834    09     0.00201
+1834    10     0.00201
+1834    11     0.00201
+1834    12     0.00201
+1835    01     0.00206
+1835    02     0.00206
+1835    03     0.00206
+1835    04     0.00206
+1835    05     0.00206
+1835    06     0.00206
+1835    07     0.00206
+1835    08     0.00206
+1835    09     0.00206
+1835    10     0.00206
+1835    11     0.00206
+1835    12     0.00206
+1836    01     0.00238
+1836    02     0.00238
+1836    03     0.00238
+1836    04     0.00238
+1836    05     0.00238
+1836    06     0.00238
+1836    07     0.00238
+1836    08     0.00238
+1836    09     0.00238
+1836    10     0.00238
+1836    11     0.00238
+1836    12     0.00238
+1837    01     0.00238
+1837    02     0.00238
+1837    03     0.00238
+1837    04     0.00238
+1837    05     0.00238
+1837    06     0.00238
+1837    07     0.00238
+1837    08     0.00238
+1837    09     0.00238
+1837    10     0.00238
+1837    11     0.00238
+1837    12     0.00238
+1838    01     0.00246
+1838    02     0.00246
+1838    03     0.00246
+1838    04     0.00246
+1838    05     0.00246
+1838    06     0.00246
+1838    07     0.00246
+1838    08     0.00246
+1838    09     0.00246
+1838    10     0.00246
+1838    11     0.00246
+1838    12     0.00246
+1839    01     0.00254
+1839    02     0.00254
+1839    03     0.00254
+1839    04     0.00254
+1839    05     0.00254
+1839    06     0.00254
+1839    07     0.00254
+1839    08     0.00254
+1839    09     0.00254
+1839    10     0.00254
+1839    11     0.00254
+1839    12     0.00254
+1840    01     0.00271
+1840    02     0.00271
+1840    03     0.00271
+1840    04     0.00271
+1840    05     0.00271
+1840    06     0.00271
+1840    07     0.00271
+1840    08     0.00271
+1840    09     0.00271
+1840    10     0.00271
+1840    11     0.00271
+1840    12     0.00271
+1841    01     0.00279
+1841    02     0.00279
+1841    03     0.00279
+1841    04     0.00279
+1841    05     0.00279
+1841    06     0.00279
+1841    07     0.00279
+1841    08     0.00279
+1841    09     0.00279
+1841    10     0.00279
+1841    11     0.00279
+1841    12     0.00279
+1842    01     0.00295
+1842    02     0.00295
+1842    03     0.00295
+1842    04     0.00295
+1842    05     0.00295
+1842    06     0.00295
+1842    07     0.00295
+1842    08     0.00295
+1842    09     0.00295
+1842    10     0.00295
+1842    11     0.00295
+1842    12     0.00295
+1843    01     0.00302
+1843    02     0.00302
+1843    03     0.00302
+1843    04     0.00302
+1843    05     0.00302
+1843    06     0.00302
+1843    07     0.00302
+1843    08     0.00302
+1843    09     0.00302
+1843    10     0.00302
+1843    11     0.00302
+1843    12     0.00302
+1844    01     0.00322
+1844    02     0.00322
+1844    03     0.00322
+1844    04     0.00322
+1844    05     0.00322
+1844    06     0.00322
+1844    07     0.00322
+1844    08     0.00322
+1844    09     0.00322
+1844    10     0.00322
+1844    11     0.00322
+1844    12     0.00322
+1845    01     0.00353
+1845    02     0.00353
+1845    03     0.00353
+1845    04     0.00353
+1845    05     0.00353
+1845    06     0.00353
+1845    07     0.00353
+1845    08     0.00353
+1845    09     0.00353
+1845    10     0.00353
+1845    11     0.00353
+1845    12     0.00353
+1846    01     0.00359
+1846    02     0.00359
+1846    03     0.00359
+1846    04     0.00359
+1846    05     0.00359
+1846    06     0.00359
+1846    07     0.00359
+1846    08     0.00359
+1846    09     0.00359
+1846    10     0.00359
+1846    11     0.00359
+1846    12     0.00359
+1847    01     0.00392
+1847    02     0.00392
+1847    03     0.00392
+1847    04     0.00392
+1847    05     0.00392
+1847    06     0.00392
+1847    07     0.00392
+1847    08     0.00392
+1847    09     0.00392
+1847    10     0.00392
+1847    11     0.00392
+1847    12     0.00392
+1848    01     0.00395
+1848    02     0.00395
+1848    03     0.00395
+1848    04     0.00395
+1848    05     0.00395
+1848    06     0.00395
+1848    07     0.00395
+1848    08     0.00395
+1848    09     0.00395
+1848    10     0.00395
+1848    11     0.00395
+1848    12     0.00395
+1849    01     0.00417
+1849    02     0.00417
+1849    03     0.00417
+1849    04     0.00417
+1849    05     0.00417
+1849    06     0.00417
+1849    07     0.00417
+1849    08     0.00417
+1849    09     0.00417
+1849    10     0.00417
+1849    11     0.00417
+1849    12     0.00417
+1850    01     0.00448
+1850    02     0.00448
+1850    03     0.00448
+1850    04     0.00448
+1850    05     0.00448
+1850    06     0.00448
+1850    07     0.00448
+1850    08     0.00448
+1850    09     0.00448
+1850    10     0.00448
+1850    11     0.00448
+1850    12     0.00448
+1851    01     0.00452
+1851    02     0.00452
+1851    03     0.00452
+1851    04     0.00452
+1851    05     0.00452
+1851    06     0.00452
+1851    07     0.00452
+1851    08     0.00452
+1851    09     0.00452
+1851    10     0.00452
+1851    11     0.00452
+1851    12     0.00452
+1852    01     0.00472
+1852    02     0.00472
+1852    03     0.00472
+1852    04     0.00472
+1852    05     0.00472
+1852    06     0.00472
+1852    07     0.00472
+1852    08     0.00472
+1852    09     0.00472
+1852    10     0.00472
+1852    11     0.00472
+1852    12     0.00472
+1853    01     0.00494
+1853    02     0.00494
+1853    03     0.00494
+1853    04     0.00494
+1853    05     0.00494
+1853    06     0.00494
+1853    07     0.00494
+1853    08     0.00494
+1853    09     0.00494
+1853    10     0.00494
+1853    11     0.00494
+1853    12     0.00494
+1854    01     0.00580
+1854    02     0.00580
+1854    03     0.00580
+1854    04     0.00580
+1854    05     0.00580
+1854    06     0.00580
+1854    07     0.00580
+1854    08     0.00580
+1854    09     0.00580
+1854    10     0.00580
+1854    11     0.00580
+1854    12     0.00580
+1855    01     0.00592
+1855    02     0.00592
+1855    03     0.00592
+1855    04     0.00592
+1855    05     0.00592
+1855    06     0.00592
+1855    07     0.00592
+1855    08     0.00592
+1855    09     0.00592
+1855    10     0.00592
+1855    11     0.00592
+1855    12     0.00592
+1856    01     0.00631
+1856    02     0.00631
+1856    03     0.00631
+1856    04     0.00631
+1856    05     0.00631
+1856    06     0.00631
+1856    07     0.00631
+1856    08     0.00631
+1856    09     0.00631
+1856    10     0.00631
+1856    11     0.00631
+1856    12     0.00631
+1857    01     0.00637
+1857    02     0.00637
+1857    03     0.00637
+1857    04     0.00637
+1857    05     0.00637
+1857    06     0.00637
+1857    07     0.00637
+1857    08     0.00637
+1857    09     0.00637
+1857    10     0.00637
+1857    11     0.00637
+1857    12     0.00637
+1858    01     0.00646
+1858    02     0.00646
+1858    03     0.00646
+1858    04     0.00646
+1858    05     0.00646
+1858    06     0.00646
+1858    07     0.00646
+1858    08     0.00646
+1858    09     0.00646
+1858    10     0.00646
+1858    11     0.00646
+1858    12     0.00646
+1859    01     0.00685
+1859    02     0.00685
+1859    03     0.00685
+1859    04     0.00685
+1859    05     0.00685
+1859    06     0.00685
+1859    07     0.00685
+1859    08     0.00685
+1859    09     0.00685
+1859    10     0.00685
+1859    11     0.00685
+1859    12     0.00685
+1860    01     0.00752
+1860    02     0.00752
+1860    03     0.00752
+1860    04     0.00752
+1860    05     0.00752
+1860    06     0.00752
+1860    07     0.00752
+1860    08     0.00752
+1860    09     0.00752
+1860    10     0.00752
+1860    11     0.00752
+1860    12     0.00752
+1861    01     0.00791
+1861    02     0.00791
+1861    03     0.00791
+1861    04     0.00791
+1861    05     0.00791
+1861    06     0.00791
+1861    07     0.00791
+1861    08     0.00791
+1861    09     0.00791
+1861    10     0.00791
+1861    11     0.00791
+1861    12     0.00791
+1862    01     0.00805
+1862    02     0.00805
+1862    03     0.00805
+1862    04     0.00805
+1862    05     0.00805
+1862    06     0.00805
+1862    07     0.00805
+1862    08     0.00805
+1862    09     0.00805
+1862    10     0.00805
+1862    11     0.00805
+1862    12     0.00805
+1863    01     0.00860
+1863    02     0.00860
+1863    03     0.00860
+1863    04     0.00860
+1863    05     0.00860
+1863    06     0.00860
+1863    07     0.00860
+1863    08     0.00860
+1863    09     0.00860
+1863    10     0.00860
+1863    11     0.00860
+1863    12     0.00860
+1864    01     0.00926
+1864    02     0.00926
+1864    03     0.00926
+1864    04     0.00926
+1864    05     0.00926
+1864    06     0.00926
+1864    07     0.00926
+1864    08     0.00926
+1864    09     0.00926
+1864    10     0.00926
+1864    11     0.00926
+1864    12     0.00926
+1865    01     0.00983
+1865    02     0.00983
+1865    03     0.00983
+1865    04     0.00983
+1865    05     0.00983
+1865    06     0.00983
+1865    07     0.00983
+1865    08     0.00983
+1865    09     0.00983
+1865    10     0.00983
+1865    11     0.00983
+1865    12     0.00983
+1866    01     0.01014
+1866    02     0.01014
+1866    03     0.01014
+1866    04     0.01014
+1866    05     0.01014
+1866    06     0.01014
+1866    07     0.01014
+1866    08     0.01014
+1866    09     0.01014
+1866    10     0.01014
+1866    11     0.01014
+1866    12     0.01014
+1867    01     0.01087
+1867    02     0.01087
+1867    03     0.01087
+1867    04     0.01087
+1867    05     0.01087
+1867    06     0.01087
+1867    07     0.01087
+1867    08     0.01087
+1867    09     0.01087
+1867    10     0.01087
+1867    11     0.01087
+1867    12     0.01087
+1868    01     0.01116
+1868    02     0.01116
+1868    03     0.01116
+1868    04     0.01116
+1868    05     0.01116
+1868    06     0.01116
+1868    07     0.01116
+1868    08     0.01116
+1868    09     0.01116
+1868    10     0.01116
+1868    11     0.01116
+1868    12     0.01116
+1869    01     0.01185
+1869    02     0.01185
+1869    03     0.01185
+1869    04     0.01185
+1869    05     0.01185
+1869    06     0.01185
+1869    07     0.01185
+1869    08     0.01185
+1869    09     0.01185
+1869    10     0.01185
+1869    11     0.01185
+1869    12     0.01185
+1870    01     0.01211
+1870    02     0.01211
+1870    03     0.01211
+1870    04     0.01211
+1870    05     0.01211
+1870    06     0.01211
+1870    07     0.01211
+1870    08     0.01211
+1870    09     0.01211
+1870    10     0.01211
+1870    11     0.01211
+1870    12     0.01211
+1871    01     0.01288
+1871    02     0.01288
+1871    03     0.01288
+1871    04     0.01288
+1871    05     0.01288
+1871    06     0.01288
+1871    07     0.01288
+1871    08     0.01288
+1871    09     0.01288
+1871    10     0.01288
+1871    11     0.01288
+1871    12     0.01288
+1872    01     0.01425
+1872    02     0.01425
+1872    03     0.01425
+1872    04     0.01425
+1872    05     0.01425
+1872    06     0.01425
+1872    07     0.01425
+1872    08     0.01425
+1872    09     0.01425
+1872    10     0.01425
+1872    11     0.01425
+1872    12     0.01425
+1873    01     0.01513
+1873    02     0.01513
+1873    03     0.01513
+1873    04     0.01513
+1873    05     0.01513
+1873    06     0.01513
+1873    07     0.01513
+1873    08     0.01513
+1873    09     0.01513
+1873    10     0.01513
+1873    11     0.01513
+1873    12     0.01513
+1874    01     0.01417
+1874    02     0.01417
+1874    03     0.01417
+1874    04     0.01417
+1874    05     0.01417
+1874    06     0.01417
+1874    07     0.01417
+1874    08     0.01417
+1874    09     0.01417
+1874    10     0.01417
+1874    11     0.01417
+1874    12     0.01417
+1875    01     0.01537
+1875    02     0.01537
+1875    03     0.01537
+1875    04     0.01537
+1875    05     0.01537
+1875    06     0.01537
+1875    07     0.01537
+1875    08     0.01537
+1875    09     0.01537
+1875    10     0.01537
+1875    11     0.01537
+1875    12     0.01537
+1876    01     0.01559
+1876    02     0.01559
+1876    03     0.01559
+1876    04     0.01559
+1876    05     0.01559
+1876    06     0.01559
+1876    07     0.01559
+1876    08     0.01559
+1876    09     0.01559
+1876    10     0.01559
+1876    11     0.01559
+1876    12     0.01559
+1877    01     0.01590
+1877    02     0.01590
+1877    03     0.01590
+1877    04     0.01590
+1877    05     0.01590
+1877    06     0.01590
+1877    07     0.01590
+1877    08     0.01590
+1877    09     0.01590
+1877    10     0.01590
+1877    11     0.01590
+1877    12     0.01590
+1878    01     0.01602
+1878    02     0.01602
+1878    03     0.01602
+1878    04     0.01602
+1878    05     0.01602
+1878    06     0.01602
+1878    07     0.01602
+1878    08     0.01602
+1878    09     0.01602
+1878    10     0.01602
+1878    11     0.01602
+1878    12     0.01602
+1879    01     0.01717
+1879    02     0.01717
+1879    03     0.01717
+1879    04     0.01717
+1879    05     0.01717
+1879    06     0.01717
+1879    07     0.01717
+1879    08     0.01717
+1879    09     0.01717
+1879    10     0.01717
+1879    11     0.01717
+1879    12     0.01717
+1880    01     0.01942
+1880    02     0.01942
+1880    03     0.01942
+1880    04     0.01942
+1880    05     0.01942
+1880    06     0.01942
+1880    07     0.01942
+1880    08     0.01942
+1880    09     0.01942
+1880    10     0.01942
+1880    11     0.01942
+1880    12     0.01942
+1881    01     0.02007
+1881    02     0.02007
+1881    03     0.02007
+1881    04     0.02007
+1881    05     0.02007
+1881    06     0.02007
+1881    07     0.02007
+1881    08     0.02007
+1881    09     0.02007
+1881    10     0.02007
+1881    11     0.02007
+1881    12     0.02007
+1882    01     0.02120
+1882    02     0.02120
+1882    03     0.02120
+1882    04     0.02120
+1882    05     0.02120
+1882    06     0.02120
+1882    07     0.02120
+1882    08     0.02120
+1882    09     0.02120
+1882    10     0.02120
+1882    11     0.02120
+1882    12     0.02120
+1883    01     0.02255
+1883    02     0.02255
+1883    03     0.02255
+1883    04     0.02255
+1883    05     0.02255
+1883    06     0.02255
+1883    07     0.02255
+1883    08     0.02255
+1883    09     0.02255
+1883    10     0.02255
+1883    11     0.02255
+1883    12     0.02255
+1884    01     0.02280
+1884    02     0.02280
+1884    03     0.02280
+1884    04     0.02280
+1884    05     0.02280
+1884    06     0.02280
+1884    07     0.02280
+1884    08     0.02280
+1884    09     0.02280
+1884    10     0.02280
+1884    11     0.02280
+1884    12     0.02280
+1885    01     0.02297
+1885    02     0.02297
+1885    03     0.02297
+1885    04     0.02297
+1885    05     0.02297
+1885    06     0.02297
+1885    07     0.02297
+1885    08     0.02297
+1885    09     0.02297
+1885    10     0.02297
+1885    11     0.02297
+1885    12     0.02297
+1886    01     0.02333
+1886    02     0.02333
+1886    03     0.02333
+1886    04     0.02333
+1886    05     0.02333
+1886    06     0.02333
+1886    07     0.02333
+1886    08     0.02333
+1886    09     0.02333
+1886    10     0.02333
+1886    11     0.02333
+1886    12     0.02333
+1887    01     0.02450
+1887    02     0.02450
+1887    03     0.02450
+1887    04     0.02450
+1887    05     0.02450
+1887    06     0.02450
+1887    07     0.02450
+1887    08     0.02450
+1887    09     0.02450
+1887    10     0.02450
+1887    11     0.02450
+1887    12     0.02450
+1888    01     0.02712
+1888    02     0.02712
+1888    03     0.02712
+1888    04     0.02712
+1888    05     0.02712
+1888    06     0.02712
+1888    07     0.02712
+1888    08     0.02712
+1888    09     0.02712
+1888    10     0.02712
+1888    11     0.02712
+1888    12     0.02712
+1889    01     0.02711
+1889    02     0.02711
+1889    03     0.02711
+1889    04     0.02711
+1889    05     0.02711
+1889    06     0.02711
+1889    07     0.02711
+1889    08     0.02711
+1889    09     0.02711
+1889    10     0.02711
+1889    11     0.02711
+1889    12     0.02711
+1890    01     0.02954
+1890    02     0.02954
+1890    03     0.02954
+1890    04     0.02954
+1890    05     0.02954
+1890    06     0.02954
+1890    07     0.02954
+1890    08     0.02954
+1890    09     0.02954
+1890    10     0.02954
+1890    11     0.02954
+1890    12     0.02954
+1891    01     0.03092
+1891    02     0.03092
+1891    03     0.03092
+1891    04     0.03092
+1891    05     0.03092
+1891    06     0.03092
+1891    07     0.03092
+1891    08     0.03092
+1891    09     0.03092
+1891    10     0.03092
+1891    11     0.03092
+1891    12     0.03092
+1892    01     0.03117
+1892    02     0.03117
+1892    03     0.03117
+1892    04     0.03117
+1892    05     0.03117
+1892    06     0.03117
+1892    07     0.03117
+1892    08     0.03117
+1892    09     0.03117
+1892    10     0.03117
+1892    11     0.03117
+1892    12     0.03117
+1893    01     0.03080
+1893    02     0.03080
+1893    03     0.03080
+1893    04     0.03080
+1893    05     0.03080
+1893    06     0.03080
+1893    07     0.03080
+1893    08     0.03080
+1893    09     0.03080
+1893    10     0.03080
+1893    11     0.03080
+1893    12     0.03080
+1894    01     0.03187
+1894    02     0.03187
+1894    03     0.03187
+1894    04     0.03187
+1894    05     0.03187
+1894    06     0.03187
+1894    07     0.03187
+1894    08     0.03187
+1894    09     0.03187
+1894    10     0.03187
+1894    11     0.03187
+1894    12     0.03187
+1895    01     0.03380
+1895    02     0.03380
+1895    03     0.03380
+1895    04     0.03380
+1895    05     0.03380
+1895    06     0.03380
+1895    07     0.03380
+1895    08     0.03380
+1895    09     0.03380
+1895    10     0.03380
+1895    11     0.03380
+1895    12     0.03380
+1896    01     0.03490
+1896    02     0.03490
+1896    03     0.03490
+1896    04     0.03490
+1896    05     0.03490
+1896    06     0.03490
+1896    07     0.03490
+1896    08     0.03490
+1896    09     0.03490
+1896    10     0.03490
+1896    11     0.03490
+1896    12     0.03490
+1897    01     0.03655
+1897    02     0.03655
+1897    03     0.03655
+1897    04     0.03655
+1897    05     0.03655
+1897    06     0.03655
+1897    07     0.03655
+1897    08     0.03655
+1897    09     0.03655
+1897    10     0.03655
+1897    11     0.03655
+1897    12     0.03655
+1898    01     0.03855
+1898    02     0.03855
+1898    03     0.03855
+1898    04     0.03855
+1898    05     0.03855
+1898    06     0.03855
+1898    07     0.03855
+1898    08     0.03855
+1898    09     0.03855
+1898    10     0.03855
+1898    11     0.03855
+1898    12     0.03855
+1899    01     0.04212
+1899    02     0.04212
+1899    03     0.04212
+1899    04     0.04212
+1899    05     0.04212
+1899    06     0.04212
+1899    07     0.04212
+1899    08     0.04212
+1899    09     0.04212
+1899    10     0.04212
+1899    11     0.04212
+1899    12     0.04212
+1900    01     0.04443
+1900    02     0.04443
+1900    03     0.04443
+1900    04     0.04443
+1900    05     0.04443
+1900    06     0.04443
+1900    07     0.04443
+1900    08     0.04443
+1900    09     0.04443
+1900    10     0.04443
+1900    11     0.04443
+1900    12     0.04443
+1901    01     0.04590
+1901    02     0.04590
+1901    03     0.04590
+1901    04     0.04590
+1901    05     0.04590
+1901    06     0.04590
+1901    07     0.04590
+1901    08     0.04590
+1901    09     0.04590
+1901    10     0.04590
+1901    11     0.04590
+1901    12     0.04590
+1902    01     0.04706
+1902    02     0.04706
+1902    03     0.04706
+1902    04     0.04706
+1902    05     0.04706
+1902    06     0.04706
+1902    07     0.04706
+1902    08     0.04706
+1902    09     0.04706
+1902    10     0.04706
+1902    11     0.04706
+1902    12     0.04706
+1903    01     0.05134
+1903    02     0.05134
+1903    03     0.05134
+1903    04     0.05134
+1903    05     0.05134
+1903    06     0.05134
+1903    07     0.05134
+1903    08     0.05134
+1903    09     0.05134
+1903    10     0.05134
+1903    11     0.05134
+1903    12     0.05134
+1904    01     0.05188
+1904    02     0.05188
+1904    03     0.05188
+1904    04     0.05188
+1904    05     0.05188
+1904    06     0.05188
+1904    07     0.05188
+1904    08     0.05188
+1904    09     0.05188
+1904    10     0.05188
+1904    11     0.05188
+1904    12     0.05188
+1905    01     0.05524
+1905    02     0.05524
+1905    03     0.05524
+1905    04     0.05524
+1905    05     0.05524
+1905    06     0.05524
+1905    07     0.05524
+1905    08     0.05524
+1905    09     0.05524
+1905    10     0.05524
+1905    11     0.05524
+1905    12     0.05524
+1906    01     0.05802
+1906    02     0.05802
+1906    03     0.05802
+1906    04     0.05802
+1906    05     0.05802
+1906    06     0.05802
+1906    07     0.05802
+1906    08     0.05802
+1906    09     0.05802
+1906    10     0.05802
+1906    11     0.05802
+1906    12     0.05802
+1907    01     0.06561
+1907    02     0.06561
+1907    03     0.06561
+1907    04     0.06561
+1907    05     0.06561
+1907    06     0.06561
+1907    07     0.06561
+1907    08     0.06561
+1907    09     0.06561
+1907    10     0.06561
+1907    11     0.06561
+1907    12     0.06561
+1908    01     0.06313
+1908    02     0.06313
+1908    03     0.06313
+1908    04     0.06313
+1908    05     0.06313
+1908    06     0.06313
+1908    07     0.06313
+1908    08     0.06313
+1908    09     0.06313
+1908    10     0.06313
+1908    11     0.06313
+1908    12     0.06313
+1909    01     0.06562
+1909    02     0.06562
+1909    03     0.06562
+1909    04     0.06562
+1909    05     0.06562
+1909    06     0.06562
+1909    07     0.06562
+1909    08     0.06562
+1909    09     0.06562
+1909    10     0.06562
+1909    11     0.06562
+1909    12     0.06562
+1910    01     0.06882
+1910    02     0.06882
+1910    03     0.06882
+1910    04     0.06882
+1910    05     0.06882
+1910    06     0.06882
+1910    07     0.06882
+1910    08     0.06882
+1910    09     0.06882
+1910    10     0.06882
+1910    11     0.06882
+1910    12     0.06882
+1911    01     0.07008
+1911    02     0.07008
+1911    03     0.07008
+1911    04     0.07008
+1911    05     0.07008
+1911    06     0.07008
+1911    07     0.07008
+1911    08     0.07008
+1911    09     0.07008
+1911    10     0.07008
+1911    11     0.07008
+1911    12     0.07008
+1912    01     0.07339
+1912    02     0.07339
+1912    03     0.07339
+1912    04     0.07339
+1912    05     0.07339
+1912    06     0.07339
+1912    07     0.07339
+1912    08     0.07339
+1912    09     0.07339
+1912    10     0.07339
+1912    11     0.07339
+1912    12     0.07339
+1913    01     0.07941
+1913    02     0.07941
+1913    03     0.07941
+1913    04     0.07941
+1913    05     0.07941
+1913    06     0.07941
+1913    07     0.07941
+1913    08     0.07941
+1913    09     0.07941
+1913    10     0.07941
+1913    11     0.07941
+1913    12     0.07941
+1914    01     0.07205
+1914    02     0.07205
+1914    03     0.07205
+1914    04     0.07205
+1914    05     0.07205
+1914    06     0.07205
+1914    07     0.07205
+1914    08     0.07205
+1914    09     0.07205
+1914    10     0.07205
+1914    11     0.07205
+1914    12     0.07205
+1915    01     0.07108
+1915    02     0.07108
+1915    03     0.07108
+1915    04     0.07108
+1915    05     0.07108
+1915    06     0.07108
+1915    07     0.07108
+1915    08     0.07108
+1915    09     0.07108
+1915    10     0.07108
+1915    11     0.07108
+1915    12     0.07108
+1916    01     0.07670
+1916    02     0.07670
+1916    03     0.07670
+1916    04     0.07670
+1916    05     0.07670
+1916    06     0.07670
+1916    07     0.07670
+1916    08     0.07670
+1916    09     0.07670
+1916    10     0.07670
+1916    11     0.07670
+1916    12     0.07670
+1917    01     0.08025
+1917    02     0.08025
+1917    03     0.08025
+1917    04     0.08025
+1917    05     0.08025
+1917    06     0.08025
+1917    07     0.08025
+1917    08     0.08025
+1917    09     0.08025
+1917    10     0.08025
+1917    11     0.08025
+1917    12     0.08025
+1918    01     0.07916
+1918    02     0.07916
+1918    03     0.07916
+1918    04     0.07916
+1918    05     0.07916
+1918    06     0.07916
+1918    07     0.07916
+1918    08     0.07916
+1918    09     0.07916
+1918    10     0.07916
+1918    11     0.07916
+1918    12     0.07916
+1919    01     0.06861
+1919    02     0.06861
+1919    03     0.06861
+1919    04     0.06861
+1919    05     0.06861
+1919    06     0.06861
+1919    07     0.06861
+1919    08     0.06861
+1919    09     0.06861
+1919    10     0.06861
+1919    11     0.06861
+1919    12     0.06861
+1920    01     0.07978
+1920    02     0.07978
+1920    03     0.07978
+1920    04     0.07978
+1920    05     0.07978
+1920    06     0.07978
+1920    07     0.07978
+1920    08     0.07978
+1920    09     0.07978
+1920    10     0.07978
+1920    11     0.07978
+1920    12     0.07978
+1921    01     0.07000
+1921    02     0.07000
+1921    03     0.07000
+1921    04     0.07000
+1921    05     0.07000
+1921    06     0.07000
+1921    07     0.07000
+1921    08     0.07000
+1921    09     0.07000
+1921    10     0.07000
+1921    11     0.07000
+1921    12     0.07000
+1922    01     0.07340
+1922    02     0.07340
+1922    03     0.07340
+1922    04     0.07340
+1922    05     0.07340
+1922    06     0.07340
+1922    07     0.07340
+1922    08     0.07340
+1922    09     0.07340
+1922    10     0.07340
+1922    11     0.07340
+1922    12     0.07340
+1923    01     0.08328
+1923    02     0.08328
+1923    03     0.08328
+1923    04     0.08328
+1923    05     0.08328
+1923    06     0.08328
+1923    07     0.08328
+1923    08     0.08328
+1923    09     0.08328
+1923    10     0.08328
+1923    11     0.08328
+1923    12     0.08328
+1924    01     0.08355
+1924    02     0.08355
+1924    03     0.08355
+1924    04     0.08355
+1924    05     0.08355
+1924    06     0.08355
+1924    07     0.08355
+1924    08     0.08355
+1924    09     0.08355
+1924    10     0.08355
+1924    11     0.08355
+1924    12     0.08355
+1925    01     0.08413
+1925    02     0.08413
+1925    03     0.08413
+1925    04     0.08413
+1925    05     0.08413
+1925    06     0.08413
+1925    07     0.08413
+1925    08     0.08413
+1925    09     0.08413
+1925    10     0.08413
+1925    11     0.08413
+1925    12     0.08413
+1926    01     0.08283
+1926    02     0.08283
+1926    03     0.08283
+1926    04     0.08283
+1926    05     0.08283
+1926    06     0.08283
+1926    07     0.08283
+1926    08     0.08283
+1926    09     0.08283
+1926    10     0.08283
+1926    11     0.08283
+1926    12     0.08283
+1927    01     0.09046
+1927    02     0.09046
+1927    03     0.09046
+1927    04     0.09046
+1927    05     0.09046
+1927    06     0.09046
+1927    07     0.09046
+1927    08     0.09046
+1927    09     0.09046
+1927    10     0.09046
+1927    11     0.09046
+1927    12     0.09046
+1928    01     0.09077
+1928    02     0.09077
+1928    03     0.09077
+1928    04     0.09077
+1928    05     0.09077
+1928    06     0.09077
+1928    07     0.09077
+1928    08     0.09077
+1928    09     0.09077
+1928    10     0.09077
+1928    11     0.09077
+1928    12     0.09077
+1929    01     0.09759
+1929    02     0.09759
+1929    03     0.09759
+1929    04     0.09759
+1929    05     0.09759
+1929    06     0.09759
+1929    07     0.09759
+1929    08     0.09759
+1929    09     0.09759
+1929    10     0.09759
+1929    11     0.09759
+1929    12     0.09759
+1930    01     0.09022
+1930    02     0.09022
+1930    03     0.09022
+1930    04     0.09022
+1930    05     0.09022
+1930    06     0.09022
+1930    07     0.09022
+1930    08     0.09022
+1930    09     0.09022
+1930    10     0.09022
+1930    11     0.09022
+1930    12     0.09022
+1931    01     0.08058
+1931    02     0.08058
+1931    03     0.08058
+1931    04     0.08058
+1931    05     0.08058
+1931    06     0.08058
+1931    07     0.08058
+1931    08     0.08058
+1931    09     0.08058
+1931    10     0.08058
+1931    11     0.08058
+1931    12     0.08058
+1932    01     0.07270
+1932    02     0.07270
+1932    03     0.07270
+1932    04     0.07270
+1932    05     0.07270
+1932    06     0.07270
+1932    07     0.07270
+1932    08     0.07270
+1932    09     0.07270
+1932    10     0.07270
+1932    11     0.07270
+1932    12     0.07270
+1933    01     0.07655
+1933    02     0.07655
+1933    03     0.07655
+1933    04     0.07655
+1933    05     0.07655
+1933    06     0.07655
+1933    07     0.07655
+1933    08     0.07655
+1933    09     0.07655
+1933    10     0.07655
+1933    11     0.07655
+1933    12     0.07655
+1934    01     0.08328
+1934    02     0.08328
+1934    03     0.08328
+1934    04     0.08328
+1934    05     0.08328
+1934    06     0.08328
+1934    07     0.08328
+1934    08     0.08328
+1934    09     0.08328
+1934    10     0.08328
+1934    11     0.08328
+1934    12     0.08328
+1935    01     0.08748
+1935    02     0.08748
+1935    03     0.08748
+1935    04     0.08748
+1935    05     0.08748
+1935    06     0.08748
+1935    07     0.08748
+1935    08     0.08748
+1935    09     0.08748
+1935    10     0.08748
+1935    11     0.08748
+1935    12     0.08748
+1936    01     0.09606
+1936    02     0.09606
+1936    03     0.09606
+1936    04     0.09606
+1936    05     0.09606
+1936    06     0.09606
+1936    07     0.09606
+1936    08     0.09606
+1936    09     0.09606
+1936    10     0.09606
+1936    11     0.09606
+1936    12     0.09606
+1937    01     0.10287
+1937    02     0.10287
+1937    03     0.10287
+1937    04     0.10287
+1937    05     0.10287
+1937    06     0.10287
+1937    07     0.10287
+1937    08     0.10287
+1937    09     0.10287
+1937    10     0.10287
+1937    11     0.10287
+1937    12     0.10287
+1938    01     0.09700
+1938    02     0.09700
+1938    03     0.09700
+1938    04     0.09700
+1938    05     0.09700
+1938    06     0.09700
+1938    07     0.09700
+1938    08     0.09700
+1938    09     0.09700
+1938    10     0.09700
+1938    11     0.09700
+1938    12     0.09700
+1939    01     0.10242
+1939    02     0.10242
+1939    03     0.10242
+1939    04     0.10242
+1939    05     0.10242
+1939    06     0.10242
+1939    07     0.10242
+1939    08     0.10242
+1939    09     0.10242
+1939    10     0.10242
+1939    11     0.10242
+1939    12     0.10242
+1940    01     0.11154
+1940    02     0.11154
+1940    03     0.11154
+1940    04     0.11154
+1940    05     0.11154
+1940    06     0.11154
+1940    07     0.11154
+1940    08     0.11154
+1940    09     0.11154
+1940    10     0.11154
+1940    11     0.11154
+1940    12     0.11154
+1941    01     0.11428
+1941    02     0.11428
+1941    03     0.11428
+1941    04     0.11428
+1941    05     0.11428
+1941    06     0.11428
+1941    07     0.11428
+1941    08     0.11428
+1941    09     0.11428
+1941    10     0.11428
+1941    11     0.11428
+1941    12     0.11428
+1942    01     0.11463
+1942    02     0.11463
+1942    03     0.11463
+1942    04     0.11463
+1942    05     0.11463
+1942    06     0.11463
+1942    07     0.11463
+1942    08     0.11463
+1942    09     0.11463
+1942    10     0.11463
+1942    11     0.11463
+1942    12     0.11463
+1943    01     0.11864
+1943    02     0.11864
+1943    03     0.11864
+1943    04     0.11864
+1943    05     0.11864
+1943    06     0.11864
+1943    07     0.11864
+1943    08     0.11864
+1943    09     0.11864
+1943    10     0.11864
+1943    11     0.11864
+1943    12     0.11864
+1944    01     0.11784
+1944    02     0.11784
+1944    03     0.11784
+1944    04     0.11784
+1944    05     0.11784
+1944    06     0.11784
+1944    07     0.11784
+1944    08     0.11784
+1944    09     0.11784
+1944    10     0.11784
+1944    11     0.11784
+1944    12     0.11784
+1945    01     0.09856
+1945    02     0.09856
+1945    03     0.09856
+1945    04     0.09856
+1945    05     0.09856
+1945    06     0.09856
+1945    07     0.09856
+1945    08     0.09856
+1945    09     0.09856
+1945    10     0.09856
+1945    11     0.09856
+1945    12     0.09856
+1946    01     0.10759
+1946    02     0.10759
+1946    03     0.10759
+1946    04     0.10759
+1946    05     0.10759
+1946    06     0.10759
+1946    07     0.10759
+1946    08     0.10759
+1946    09     0.10759
+1946    10     0.10759
+1946    11     0.10759
+1946    12     0.10759
+1947    01     0.11910
+1947    02     0.11910
+1947    03     0.11910
+1947    04     0.11910
+1947    05     0.11910
+1947    06     0.11910
+1947    07     0.11910
+1947    08     0.11910
+1947    09     0.11910
+1947    10     0.11910
+1947    11     0.11910
+1947    12     0.11910
+1948    01     0.12530
+1948    02     0.12530
+1948    03     0.12530
+1948    04     0.12530
+1948    05     0.12530
+1948    06     0.12530
+1948    07     0.12530
+1948    08     0.12530
+1948    09     0.12530
+1948    10     0.12530
+1948    11     0.12530
+1948    12     0.12530
+1949    01     0.11929
+1949    02     0.11929
+1949    03     0.11929
+1949    04     0.11929
+1949    05     0.11929
+1949    06     0.11929
+1949    07     0.11929
+1949    08     0.11929
+1949    09     0.11929
+1949    10     0.11929
+1949    11     0.11929
+1949    12     0.11929
+1950    01     0.14254
+1950    02     0.13288
+1950    03     0.13844
+1950    04     0.12547
+1950    05     0.12480
+1950    06     0.12823
+1950    07     0.12979
+1950    08     0.12872
+1950    09     0.12622
+1950    10     0.13000
+1950    11     0.13141
+1950    12     0.14217
+1951    01     0.15935
+1951    02     0.14657
+1951    03     0.14810
+1951    04     0.13441
+1951    05     0.13222
+1951    06     0.13027
+1951    07     0.13662
+1951    08     0.13652
+1951    09     0.13530
+1951    10     0.14132
+1951    11     0.14085
+1951    12     0.15794
+1952    01     0.15159
+1952    02     0.14263
+1952    03     0.14879
+1952    04     0.13765
+1952    05     0.13726
+1952    06     0.13673
+1952    07     0.14019
+1952    08     0.14205
+1952    09     0.13916
+1952    10     0.14501
+1952    11     0.14389
+1952    12     0.15748
+1953    01     0.16150
+1953    02     0.15130
+1953    03     0.15798
+1953    04     0.14264
+1953    05     0.13798
+1953    06     0.13900
+1953    07     0.14448
+1953    08     0.14201
+1953    09     0.13874
+1953    10     0.14631
+1953    11     0.14672
+1953    12     0.16165
+1954    01     0.16274
+1954    02     0.14824
+1954    03     0.15601
+1954    04     0.14747
+1954    05     0.14321
+1954    06     0.14364
+1954    07     0.14835
+1954    08     0.14551
+1954    09     0.14580
+1954    10     0.14966
+1954    11     0.15296
+1954    12     0.16570
+1955    01     0.17489
+1955    02     0.16066
+1955    03     0.17040
+1955    04     0.15916
+1955    05     0.15753
+1955    06     0.15754
+1955    07     0.16206
+1955    08     0.16271
+1955    09     0.15875
+1955    10     0.16526
+1955    11     0.16975
+1955    12     0.18225
+1956    01     0.19891
+1956    02     0.17797
+1956    03     0.18326
+1956    04     0.16506
+1956    05     0.16554
+1956    06     0.16120
+1956    07     0.16987
+1956    08     0.16807
+1956    09     0.16650
+1956    10     0.17674
+1956    11     0.18014
+1956    12     0.19515
+1957    01     0.19233
+1957    02     0.17574
+1957    03     0.18620
+1957    04     0.17130
+1957    05     0.17455
+1957    06     0.17333
+1957    07     0.17941
+1957    08     0.17922
+1957    09     0.17465
+1957    10     0.18372
+1957    11     0.18318
+1957    12     0.20018
+1958    01     0.20399
+1958    02     0.18578
+1958    03     0.19684
+1958    04     0.18037
+1958    05     0.17910
+1958    06     0.17435
+1958    07     0.17993
+1958    08     0.18173
+1958    09     0.17834
+1958    10     0.18602
+1958    11     0.18856
+1958    12     0.20723
+1959    01     0.21650
+1959    02     0.19742
+1959    03     0.20628
+1959    04     0.19101
+1959    05     0.18853
+1959    06     0.18435
+1959    07     0.19125
+1959    08     0.19295
+1959    09     0.18788
+1959    10     0.19829
+1959    11     0.19904
+1959    12     0.21414
+1960    01     0.22003
+1960    02     0.20343
+1960    03     0.21871
+1960    04     0.20098
+1960    05     0.19659
+1960    06     0.19821
+1960    07     0.20283
+1960    08     0.20263
+1960    09     0.19895
+1960    10     0.20842
+1960    11     0.21132
+1960    12     0.23226
+1961    01     0.22145
+1961    02     0.20501
+1961    03     0.21897
+1961    04     0.20044
+1961    05     0.19788
+1961    06     0.19739
+1961    07     0.20320
+1961    08     0.20298
+1961    09     0.19990
+1961    10     0.20913
+1961    11     0.20972
+1961    12     0.23262
+1962    01     0.23263
+1962    02     0.21447
+1962    03     0.23114
+1962    04     0.20856
+1962    05     0.20389
+1962    06     0.20513
+1962    07     0.20702
+1962    08     0.21062
+1962    09     0.20466
+1962    10     0.21275
+1962    11     0.21745
+1962    12     0.23897
+1963    01     0.25173
+1963    02     0.22890
+1963    03     0.23960
+1963    04     0.21975
+1963    05     0.21415
+1963    06     0.21508
+1963    07     0.21858
+1963    08     0.21936
+1963    09     0.21833
+1963    10     0.22966
+1963    11     0.22872
+1963    12     0.25001
+1964    01     0.26367
+1964    02     0.23907
+1964    03     0.24564
+1964    04     0.23033
+1964    05     0.22285
+1964    06     0.22690
+1964    07     0.23369
+1964    08     0.23105
+1964    09     0.23182
+1964    10     0.24116
+1964    11     0.24041
+1964    12     0.26380
+1965    01     0.26961
+1965    02     0.24919
+1965    03     0.26443
+1965    04     0.24103
+1965    05     0.23849
+1965    06     0.23922
+1965    07     0.24427
+1965    08     0.24589
+1965    09     0.24054
+1965    10     0.25083
+1965    11     0.25314
+1965    12     0.26931
+1966    01     0.27757
+1966    02     0.26156
+1966    03     0.27639
+1966    04     0.25299
+1966    05     0.24907
+1966    06     0.25045
+1966    07     0.25721
+1966    08     0.25819
+1966    09     0.25031
+1966    10     0.25803
+1966    11     0.26634
+1966    12     0.28588
+1967    01     0.29057
+1967    02     0.26854
+1967    03     0.28371
+1967    04     0.26214
+1967    05     0.25662
+1967    06     0.25731
+1967    07     0.26185
+1967    08     0.26429
+1967    09     0.26004
+1967    10     0.27074
+1967    11     0.27184
+1967    12     0.29417
+1968    01     0.30937
+1968    02     0.28586
+1968    03     0.29983
+1968    04     0.27441
+1968    05     0.27032
+1968    06     0.27244
+1968    07     0.27511
+1968    08     0.27604
+1968    09     0.27467
+1968    10     0.28513
+1968    11     0.28733
+1968    12     0.31106
+1969    01     0.32687
+1969    02     0.30360
+1969    03     0.31995
+1969    04     0.29428
+1969    05     0.28947
+1969    06     0.29128
+1969    07     0.29507
+1969    08     0.29676
+1969    09     0.29160
+1969    10     0.30338
+1969    11     0.30576
+1969    12     0.33040
+1970    01     0.35044
+1970    02     0.32520
+1970    03     0.34326
+1970    04     0.32017
+1970    05     0.31528
+1970    06     0.31787
+1970    07     0.32351
+1970    08     0.32331
+1970    09     0.31418
+1970    10     0.32918
+1970    11     0.33251
+1970    12     0.35981
+1971    01     0.36660
+1971    02     0.33850
+1971    03     0.35976
+1971    04     0.33200
+1971    05     0.32836
+1971    06     0.32665
+1971    07     0.33442
+1971    08     0.33709
+1971    09     0.32410
+1971    10     0.34196
+1971    11     0.34696
+1971    12     0.37605
+1972    01     0.37912
+1972    02     0.35696
+1972    03     0.37960
+1972    04     0.34507
+1972    05     0.34246
+1972    06     0.34484
+1972    07     0.35058
+1972    08     0.35603
+1972    09     0.34233
+1972    10     0.35530
+1972    11     0.35720
+1972    12     0.39016
+1973    01     0.39642
+1973    02     0.37592
+1973    03     0.40179
+1973    04     0.36549
+1973    05     0.36229
+1973    06     0.36406
+1973    07     0.36994
+1973    08     0.37289
+1973    09     0.36206
+1973    10     0.37974
+1973    11     0.38227
+1973    12     0.41065
+1974    01     0.40205
+1974    02     0.37961
+1974    03     0.39627
+1974    04     0.36430
+1974    05     0.35815
+1974    06     0.35885
+1974    07     0.36762
+1974    08     0.36800
+1974    09     0.36202
+1974    10     0.37656
+1974    11     0.38110
+1974    12     0.41320
+1975    01     0.40312
+1975    02     0.37405
+1975    03     0.39671
+1975    04     0.36505
+1975    05     0.35863
+1975    06     0.35880
+1975    07     0.36848
+1975    08     0.37240
+1975    09     0.35946
+1975    10     0.37848
+1975    11     0.38342
+1975    12     0.41149
+1976    01     0.42405
+1976    02     0.39429
+1976    03     0.41667
+1976    04     0.38470
+1976    05     0.38014
+1976    06     0.37740
+1976    07     0.38619
+1976    08     0.39273
+1976    09     0.37698
+1976    10     0.40133
+1976    11     0.40265
+1976    12     0.44093
+1977    01     0.43427
+1977    02     0.40397
+1977    03     0.42718
+1977    04     0.39226
+1977    05     0.38731
+1977    06     0.39141
+1977    07     0.39709
+1977    08     0.39983
+1977    09     0.39052
+1977    10     0.41031
+1977    11     0.41519
+1977    12     0.45146
+1978    01     0.45106
+1978    02     0.41714
+1978    03     0.44740
+1978    04     0.41410
+1978    05     0.40291
+1978    06     0.40450
+1978    07     0.41344
+1978    08     0.41321
+1978    09     0.40805
+1978    10     0.42730
+1978    11     0.42823
+1978    12     0.46653
+1979    01     0.46495
+1979    02     0.42913
+1979    03     0.45497
+1979    04     0.42205
+1979    05     0.41534
+1979    06     0.41431
+1979    07     0.42716
+1979    08     0.42901
+1979    09     0.42001
+1979    10     0.43717
+1979    11     0.43900
+1979    12     0.47400
+1980    01     0.46589
+1980    02     0.42724
+1980    03     0.45960
+1980    04     0.42578
+1980    05     0.41192
+1980    06     0.41260
+1980    07     0.41933
+1980    08     0.42124
+1980    09     0.41393
+1980    10     0.43051
+1980    11     0.43968
+1980    12     0.47852
+1981    01     0.45338
+1981    02     0.41805
+1981    03     0.44170
+1981    04     0.40981
+1981    05     0.40115
+1981    06     0.40423
+1981    07     0.41149
+1981    08     0.41173
+1981    09     0.40181
+1981    10     0.42606
+1981    11     0.42592
+1981    12     0.46301
+1982    01     0.45253
+1982    02     0.41620
+1982    03     0.44602
+1982    04     0.40994
+1982    05     0.40217
+1982    06     0.40362
+1982    07     0.40991
+1982    08     0.41227
+1982    09     0.40062
+1982    10     0.41919
+1982    11     0.42760
+1982    12     0.45191
+1983    01     0.44717
+1983    02     0.41003
+1983    03     0.44927
+1983    04     0.41086
+1983    05     0.40281
+1983    06     0.40599
+1983    07     0.41005
+1983    08     0.42237
+1983    09     0.40992
+1983    10     0.42786
+1983    11     0.43369
+1983    12     0.47775
+1984    01     0.46924
+1984    02     0.43782
+1984    03     0.46739
+1984    04     0.42628
+1984    05     0.42004
+1984    06     0.41940
+1984    07     0.42130
+1984    08     0.43029
+1984    09     0.41423
+1984    10     0.43852
+1984    11     0.44366
+1984    12     0.46897
+1985    01     0.49039
+1985    02     0.45125
+1985    03     0.47511
+1985    04     0.43721
+1985    05     0.42990
+1985    06     0.42791
+1985    07     0.43784
+1985    08     0.44033
+1985    09     0.43260
+1985    10     0.45930
+1985    11     0.45762
+1985    12     0.50171
+1986    01     0.49250
+1986    02     0.45605
+1986    03     0.48126
+1986    04     0.44691
+1986    05     0.43774
+1986    06     0.43678
+1986    07     0.45002
+1986    08     0.44552
+1986    09     0.43707
+1986    10     0.46278
+1986    11     0.46216
+1986    12     0.50839
+1987    01     0.50518
+1987    02     0.46531
+1987    03     0.49902
+1987    04     0.45700
+1987    05     0.44995
+1987    06     0.45930
+1987    07     0.46630
+1987    08     0.46879
+1987    09     0.45651
+1987    10     0.48036
+1987    11     0.47931
+1987    12     0.52508
+1988    01     0.52287
+1988    02     0.49020
+1988    03     0.52344
+1988    04     0.47681
+1988    05     0.46679
+1988    06     0.47468
+1988    07     0.47848
+1988    08     0.48788
+1988    09     0.46872
+1988    10     0.49329
+1988    11     0.50313
+1988    12     0.54784
+1989    01     0.52160
+1989    02     0.48900
+1989    03     0.52893
+1989    04     0.48100
+1989    05     0.47522
+1989    06     0.47870
+1989    07     0.48225
+1989    08     0.49235
+1989    09     0.47963
+1989    10     0.50682
+1989    11     0.51321
+1989    12     0.56321
+1990    01     0.52825
+1990    02     0.48003
+1990    03     0.52435
+1990    04     0.48222
+1990    05     0.47486
+1990    06     0.47687
+1990    07     0.48079
+1990    08     0.49310
+1990    09     0.47797
+1990    10     0.50034
+1990    11     0.50422
+1990    12     0.54897
+1991    01     0.54627
+1991    02     0.50384
+1991    03     0.54382
+1991    04     0.50221
+1991    05     0.49971
+1991    06     0.49047
+1991    07     0.49777
+1991    08     0.49794
+1991    09     0.48224
+1991    10     0.51357
+1991    11     0.51524
+1991    12     0.55837
+1992    01     0.53393
+1992    02     0.49643
+1992    03     0.52687
+1992    04     0.48699
+1992    05     0.47703
+1992    06     0.47369
+1992    07     0.48599
+1992    08     0.48282
+1992    09     0.47853
+1992    10     0.50745
+1992    11     0.51389
+1992    12     0.55485
+1993    01     0.52888
+1993    02     0.50462
+1993    03     0.54321
+1993    04     0.49169
+1993    05     0.47737
+1993    06     0.48059
+1993    07     0.49303
+1993    08     0.49487
+1993    09     0.48453
+1993    10     0.51108
+1993    11     0.52403
+1993    12     0.56392
+1994    01     0.54106
+1994    02     0.50750
+1994    03     0.53564
+1994    04     0.49246
+1994    05     0.48723
+1994    06     0.48884
+1994    07     0.49166
+1994    08     0.50242
+1994    09     0.48732
+1994    10     0.51256
+1994    11     0.51646
+1994    12     0.55960
+1995    01     0.54184
+1995    02     0.51069
+1995    03     0.54924
+1995    04     0.49775
+1995    05     0.50171
+1995    06     0.49361
+1995    07     0.50327
+1995    08     0.51184
+1995    09     0.49449
+1995    10     0.51557
+1995    11     0.53151
+1995    12     0.58021
+1996    01     0.56457
+1996    02     0.53318
+1996    03     0.56069
+1996    04     0.51202
+1996    05     0.51159
+1996    06     0.50331
+1996    07     0.51931
+1996    08     0.52037
+1996    09     0.50864
+1996    10     0.53560
+1996    11     0.54387
+1996    12     0.58743
+1997    01     0.56862
+1997    02     0.51754
+1997    03     0.55221
+1997    04     0.51650
+1997    05     0.51358
+1997    06     0.50622
+1997    07     0.52732
+1997    08     0.52530
+1997    09     0.51648
+1997    10     0.54894
+1997    11     0.54996
+1997    12     0.59650
+1998    01     0.55336
+1998    02     0.51716
+1998    03     0.55550
+1998    04     0.50978
+1998    05     0.50603
+1998    06     0.50691
+1998    07     0.51977
+1998    08     0.51804
+1998    09     0.50830
+1998    10     0.52917
+1998    11     0.53637
+1998    12     0.58201
+1999    01     0.55720
+1999    02     0.51202
+1999    03     0.55864
+1999    04     0.51028
+1999    05     0.50580
+1999    06     0.50608
+1999    07     0.51848
+1999    08     0.52092
+1999    09     0.50601
+1999    10     0.52726
+1999    11     0.53895
+1999    12     0.58005
+2000    01     0.57314
+2000    02     0.55079
+2000    03     0.57086
+2000    04     0.51994
+2000    05     0.52341
+2000    06     0.52229
+2000    07     0.52676
+2000    08     0.54093
+2000    09     0.52664
+2000    10     0.54410
+2000    11     0.55450
+2000    12     0.60297
+2001    01     0.58647
+2001    02     0.54321
+2001    03     0.58069
+2001    04     0.53177
+2001    05     0.53513
+2001    06     0.52555
+2001    07     0.53887
+2001    08     0.54453
+2001    09     0.52289
+2001    10     0.54891
+2001    11     0.55360
+2001    12     0.59173
+2002    01     0.59298
+2002    02     0.54028
+2002    03     0.57896
+2002    04     0.53894
+2002    05     0.53658
+2002    06     0.53557
+2002    07     0.55276
+2002    08     0.55043
+2002    09     0.53663
+2002    10     0.57000
+2002    11     0.57302
+2002    12     0.61363
+2003    01     0.62731
+2003    02     0.58055
+2003    03     0.60857
+2003    04     0.56092
+2003    05     0.55414
+2003    06     0.55420
+2003    07     0.56987
+2003    08     0.57205
+2003    09     0.55958
+2003    10     0.59610
+2003    11     0.60060
+2003    12     0.65321
+2004    01     0.64882
+2004    02     0.61456
+2004    03     0.64419
+2004    04     0.59265
+2004    05     0.58759
+2004    06     0.58463
+2004    07     0.59878
+2004    08     0.59835
+2004    09     0.59342
+2004    10     0.61716
+2004    11     0.62511
+2004    12     0.68284
+2005    01     0.67566
+2005    02     0.61536
+2005    03     0.66544
+2005    04     0.61158
+2005    05     0.60571
+2005    06     0.61097
+2005    07     0.61800
+2005    08     0.62523
+2005    09     0.61036
+2005    10     0.62953
+2005    11     0.64066
+2005    12     0.70520
+2006    01     0.67556
+2006    02     0.63269
+2006    03     0.68363
+2006    04     0.62148
+2006    05     0.62526
+2006    06     0.62507
+2006    07     0.64087
+2006    08     0.64627
+2006    09     0.63042
+2006    10     0.65911
+2006    11     0.66051
+2006    12     0.71582
+2007    01     0.69849
+2007    02     0.65680
+2007    03     0.69762
+2007    04     0.64523
+2007    05     0.64697
+2007    06     0.65051
+2007    07     0.65709
+2007    08     0.67078
+2007    09     0.64786
+2007    10     0.67711
+2007    11     0.68544
+2007    12     0.73625
Index: CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/config.def_actuel
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/config.def_actuel	(revision 3559)
+++ CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/config.def_actuel	(revision 3559)
@@ -0,0 +1,80 @@
+##  Cycle diurne  ou non                 
+cycle_diurne=y
+##  Soil Model  ou non               
+soil_model=y
+## Pas de temps de couplage (s).
+t_coupl=_AUTO_
+
+## Nombre  d'appels des routines de rayonnements ( par jour)                 
+nbapp_rad=16
+
+##  Facteur additif pour l'albedo
+pmagic =  _AUTO_: DEFAULT = 0.0
+
+#
+# Parametres "orbitaux/ ere geologique"
+#
+### R_ecc =      Excentricite
+R_ecc = 0.016715
+### R_peri =     Equinoxe
+R_peri = 102.7
+### R_incl =     Inclinaison
+R_incl = 23.441
+### solaire =    Constante solaire
+#solaire = _AUTO_ : DEFAULT = 1366.0896
+solaire = _AUTO_ : DEFAULT = 1361.20 
+### constante solaire lue dans un fichier par defaut
+ok_suntime_rrtm=y
+#
+# Taux gaz a effet de serre
+#
+### co2_ppm =    taux CO2 en ppm, l'annÃ©e 2000 forcage CMIP6
+co2_ppm = _AUTO_: DEFAULT = 3.6912e+02
+### CH4_ppb =    taux CH4 en ppb, l'annÃ©e 2000 forcage CMIP6
+CH4_ppb = _AUTO_ : DEFAULT = 1.7780e+03
+### N2O_ppb =    taux N2O en ppb, l'annÃ©e 2000 forcage CMIP6
+N2O_ppb = _AUTO_ : DEFAULT = 3.1576e+02
+### CFC11_ppt = taux en ppt, l'annÃ©e 2000 forcage CFC11eq_CMIP6
+CFC11_ppt = _AUTO_ : DEFAULT = 6.3990e+01
+### CFC12_ppt =  taux en ppt, l'annÃ©e 2000 forcage CFC12eq_CMIP6
+CFC12_ppt = _AUTO_ : DEFAULT = 1.0511e+03
+#
+# Parametres effets directs/indirects des "aerosols"
+#
+### ok_ade=y/n   flag Aerosol direct effect
+ok_ade=_AUTO_
+### ok_aie=y/n   flag Aerosol indirect effect
+ok_aie=_AUTO_
+### aer_type =   Aerosol variation type : actuel / preind / scenario / annuel
+aer_type=actuel
+### aerosol coupling = online (y) or offline (n)
+aerosol_couple=_AUTO_
+###  flag_aerosol = type of coupled aerosol, if aerosol offline 
+###  0 => no aerosol, 1 => sulfate only, 2 => bc only, 3 => pom only, 4 => seasalt only, 5 => dust only, 6 => all aerosol
+flag_aerosol=_AUTO_ 
+### ok_cdnc=y/n   Cloud droplet number concentration
+ok_cdnc=_AUTO_
+### bl95_b0 =    Parameter in CDNC-maer link (Boucher&Lohmann 1995)
+bl95_b0=1.7
+### bl95_b1 =    Parameter in CDNC-maer link (Boucher&Lohmann 1995)
+bl95_b1=0.2
+# ok_alw=y flag pour activer l effet LW des poussieres
+ok_alw=y
+# Aerosols stratospheriques utilises par defaut
+flag_aerosol_strat=2
+#
+# Parametre de lecture de l'ozone
+#
+# Allowed values are 0, 1 and 2
+# 0: do not read an ozone climatology
+# 1: read a single ozone climatology that will be used day and night
+# 2: read two ozone climatologies, the average day and night climatology and the daylight climatology
+read_climoz=_AUTO_
+# 
+# Aerosols stratospheriques utilises par defaut 
+flag_aerosol_strat=2
+#
+# COSP
+ok_cosp=_AUTO_
+
+
Index: CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/config.def_annuel
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/config.def_annuel	(revision 3559)
+++ CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/config.def_annuel	(revision 3559)
@@ -0,0 +1,75 @@
+##  Cycle diurne  ou non                 
+cycle_diurne=y
+##  Soil Model  ou non               
+soil_model=y
+## Pas de temps de couplage (s).
+t_coupl=_AUTO_
+
+## Nombre  d'appels des routines de rayonnements ( par jour)                 
+nbapp_rad=16
+
+##  Facteur additif pour l'albedo
+pmagic =  _AUTO_: DEFAULT = 0.0
+
+#
+# Parametres "orbitaux/ ere geologique"
+#
+### R_ecc =      Excentricite
+R_ecc = 0.016715
+### R_peri =     Equinoxe
+R_peri = 102.7
+### R_incl =     Inclinaison
+R_incl = 23.441
+### solaire =    Constante solaire
+solaire = _AUTO_ 
+### constante solaire lue dans un fichier par defaut
+ok_suntime_rrtm=y
+#
+# Taux gaz a effet de serre
+#
+### co2_ppm =    taux CO2 en ppm
+co2_ppm = _AUTO_
+### CH4_ppb =    taux CH4 en ppb
+CH4_ppb = _AUTO_
+### N2O_ppb =    taux N2O en ppb
+N2O_ppb = _AUTO_
+### CFC11_ppt =  taux CFC11 en ppt
+CFC11_ppt = _AUTO_
+### CFC12_ppt =  taux CFC12 en ppt
+CFC12_ppt = _AUTO_
+#
+# Parametres effets directs/indirects des "aerosols"
+#
+### ok_ade=y/n   flag Aerosol direct effect
+ok_ade=_AUTO_
+### ok_aie=y/n   flag Aerosol indirect effect
+ok_aie=_AUTO_
+### aer_type =   Aerosol variation type : actuel / preind / scenario / annuel
+aer_type=annuel
+### aerosol coupling = online (y) or offline (n)
+aerosol_couple=_AUTO_
+###  flag_aerosol = type of coupled aerosol, if aerosol offline 
+###  0 => no aerosol, 1 => sulfate only, 2 => bc only, 3 => pom only, 4 => seasalt only, 5 => dust only, 6 => all aerosol
+flag_aerosol=_AUTO_ 
+### ok_cdnc=y/n   Cloud droplet number concentration
+ok_cdnc=_AUTO_
+### bl95_b0 =    Parameter in CDNC-maer link (Boucher&Lohmann 1995)
+bl95_b0=1.7
+### bl95_b1 =    Parameter in CDNC-maer link (Boucher&Lohmann 1995)
+bl95_b1=0.2
+# ok_alw=y flag pour activer l effet LW des poussieres
+ok_alw=y
+#
+#
+# Parametre de lecture de l'ozone
+#
+# Allowed values are 0, 1 and 2
+# 0: do not read an ozone climatology
+# 1: read a single ozone climatology that will be used day and night
+# 2: read two ozone climatologies, the average day and night climatology and the daylight climatology
+read_climoz=_AUTO_
+# 
+# Aerosols stratospheriques utilises par defaut 
+flag_aerosol_strat=2
+# COSP
+ok_cosp=_AUTO_
Index: CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/config.def_midHolocene
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/config.def_midHolocene	(revision 3559)
+++ CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/config.def_midHolocene	(revision 3559)
@@ -0,0 +1,66 @@
+##  Cycle diurne  ou non                 
+cycle_diurne=y
+##  Soil Model  ou non               
+soil_model=y
+## Pas de temps de couplage (s).
+t_coupl=_AUTO_
+
+## Nombre  d'appels des routines de rayonnements ( par jour)                 
+nbapp_rad=24
+
+##  Facteur additif pour l'albedo
+pmagic=0.0
+
+#
+# Parametres "orbitaux/ ere geologique"
+#
+### R_ecc =      Excentricite
+R_ecc = 0.018682
+### R_peri =     Equinoxe
+R_peri = 0.87
+### R_incl =     Inclinaison
+R_incl = 24.105
+### solaire =    Constante solaire
+solaire = _AUTO_: DEFAULT = 1365.6537
+#
+# Taux gaz a effet de serre
+#
+### co2_ppm =    taux CO2 en ppm
+co2_ppm = 280
+### CH4_ppb =    taux CH4 en ppb
+CH4_ppb = 650
+### N2O_ppb =    taux N2O en ppb
+N2O_ppb = 270
+### CFC11_ppt =  taux CFC11 en ppt
+CFC11_ppt = 0.
+### CFC12_ppt =  taux CFC12 en ppt
+CFC12_ppt =  0.
+
+#
+# Parametres effets directs/indirects des "aerosols"
+#
+### ok_ade=y/n   flag Aerosol direct effect
+ok_ade=_AUTO_
+### ok_aie=y/n   flag Aerosol indirect effect
+ok_aie=_AUTO_
+### aer_type =   Aerosol variation type : actuel / preind / scenario / annuel
+aer_type=actuel
+### aerosol coupling = online (y) or offline (n)
+aerosol_couple=_AUTO_
+###  flag_aerosol = type of coupled aerosol, if aerosol offline 
+###  0 => no aerosol, 1 => sulfate only, 2 => bc only, 3 => pom only, 4 => seasalt only, 5 => dust only, 6 => all aerosol
+flag_aerosol=_AUTO_ 
+### ok_cdnc=y/n   Cloud droplet number concentration
+ok_cdnc=_AUTO_
+### bl95_b0 =    Parameter in CDNC-maer link (Boucher&Lohmann 1995)
+bl95_b0=1.7
+### bl95_b1 =    Parameter in CDNC-maer link (Boucher&Lohmann 1995)
+bl95_b1=0.2
+#
+# Parametre de lecture de l'ozone
+#
+# Allowed values are 0, 1 and 2
+# 0: do not read an ozone climatology
+# 1: read a single ozone climatology that will be used day and night
+# 2: read two ozone climatologies, the average day and night climatology and the daylight climatology
+read_climoz=_AUTO_
Index: CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/config.def_preind
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/config.def_preind	(revision 3559)
+++ CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/config.def_preind	(revision 3559)
@@ -0,0 +1,79 @@
+##  Cycle diurne  ou non                 
+cycle_diurne=y
+
+## Pas de temps de couplage (s). 
+t_coupl=_AUTO_
+
+##  Soil Model  ou non               
+soil_model=y
+
+## Nombre  d'appels des routines de rayonnements ( par jour)                 
+nbapp_rad=16
+
+##  Facteur additif pour l'albedo
+pmagic =  _AUTO_: DEFAULT = 0.0
+
+#
+# Parametres "orbitaux/ ere geologique"
+#
+### R_ecc =      Excentricite
+R_ecc = 0.016715
+### R_peri =     Equinoxe
+R_peri = 102.7
+### R_incl =     Inclinaison
+R_incl = 23.441
+### solaire =    Constante solaire
+solaire = _AUTO_: DEFAULT = 1361.20
+### constante solaire lue dans un fichier par defaut
+ok_suntime_rrtm=y
+#
+# Taux gaz a effet de serre
+#
+### co2_ppm =    taux CO2 en ppm, l'annÃ©e 1850 forcage CMIP6
+co2_ppm = _AUTO_: DEFAULT  = 2.8432e+02
+### CH4_ppb =    taux CH4 en ppb, l'annÃ©e 1850 forcage CMIP6
+CH4_ppb = _AUTO_: DEFAULT = 8.0825e+02
+### N2O_ppb =    taux N2O en ppb, l'annÃ©e 1850 forcage CMIP6
+N2O_ppb = _AUTO_: DEFAULT = 2.7302e+02
+### CFC11_ppt = taux en ppt, l'annÃ©e 2000 forcage CFC11eq_CMIP6
+CFC11_ppt = _AUTO_: DEFAULT = 1.1726e+01
+### CFC12_ppt = taux en ppt, l'annÃ©e 2000 forcage CFC12eq_CMIP6
+CFC12_ppt = _AUTO_: DEFAULT = 1.6513e+01
+#
+# Parametres effets directs/indirects des "aerosols"
+#
+### ok_ade=y/n   flag Aerosol direct effect
+ok_ade=_AUTO_
+### ok_aie=y/n   flag Aerosol indirect effect
+ok_aie=_AUTO_
+### aer_type =   Aerosol variation type : actuel / preind / scenario / annuel
+aer_type=preind
+### aerosol coupling = online (y) or offline (n)
+aerosol_couple=_AUTO_
+###  flag_aerosol = type of coupled aerosol, if aerosol offline 
+###  0 => no aerosol, 1 => sulfate only, 2 => bc only, 3 => pom only, 4 => seasalt only, 5 => dust only, 6 => all aerosol
+flag_aerosol=_AUTO_
+### ok_cdnc=y/n   Cloud droplet number concentration
+ok_cdnc=_AUTO_
+### bl95_b0 =    Parameter in CDNC-maer link (Boucher&Lohmann 1995)
+bl95_b0=1.7
+### bl95_b1 =    Parameter in CDNC-maer link (Boucher&Lohmann 1995)
+bl95_b1=0.2
+# ok_alw=y flag pour activer l effet LW des poussieres
+ok_alw=y
+#
+# Parametre de lecture de l'ozone
+#
+# Allowed values are 0, 1 and 2
+# 0: do not read an ozone climatology
+# 1: read a single ozone climatology that will be used day and night
+# 2: read two ozone climatologies, the average day and night climatology and the daylight climatology
+read_climoz=_AUTO_
+#
+# Aerosols stratospheriques utilises par defaut 
+#
+flag_aerosol_strat=2
+#
+# COSP
+#
+ok_cosp=_AUTO_
Index: CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/gcm.def_128x118_NPv3.2
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/gcm.def_128x118_NPv3.2	(revision 3559)
+++ CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/gcm.def_128x118_NPv3.2	(revision 3559)
@@ -0,0 +1,49 @@
+## $Id$
+## This parameter set up contains a zoom over Europe
+##
+## nombre de pas par jour (multiple de iperiod) ( day_step=2880 => dt=0.5min )      
+day_step=2880
+## periode pour le pas Matsuno (en pas)
+iperiod=5
+## choix de l'operateur de dissipation (star ou  non star )
+lstardis=y
+## nombre d'iterations de l'operateur de dissipation   gradiv
+nitergdiv=1
+## nombre d'iterations de l'operateur de dissipation  nxgradrot
+nitergrot=2
+## nombre d'iterations de l'operateur de dissipation  divgrad            
+niterh=2
+## temps de dissipation des plus petites long.d ondes pour u,v (gradiv)  
+tetagdiv=1200.
+## temps de dissipation des plus petites long.d ondes pour u,v(nxgradrot)
+tetagrot=1200.
+## temps de dissipation des plus petites long.d ondes pour  h ( divgrad) 
+tetatemp=1200.
+## coefficient pour gamdissip                                            
+coefdis=0.
+## choix du shema d'integration temporelle (Matsuno ou Matsuno-leapfrog) 
+purmats=n
+## avec ou sans physique                                                 
+physic=y
+## periode de la physique (en pas)                                       
+iphysiq=15
+## longitude en degres du centre du zoom                                 
+clon=8.5
+## latitude en degres du centre du zoom                                  
+clat=50.
+## facteur de grossissement du zoom,selon longitude                      
+grossismx=4.48751
+## facteur de grossissement du zoom ,selon latitude                      
+grossismy=3.40784
+##  Fonction  f(y)  hyperbolique  si = .true.  , sinon  sinusoidale         
+fxyhypb=y
+## extension en longitude  de la zone du zoom  ( fraction de la zone totale)
+dzoomx=0.208914
+## extension en latitude de la zone  du zoom  ( fraction de la zone totale)
+dzoomy=0.243706
+##raideur du zoom en  X
+taux=10.
+##raideur du zoom en  Y
+tauy=10.
+##  Fonction  f(y) avec y = Sin(latit.) si = .true. , sinon y = latit.         
+ysinus=y
Index: CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/gcm.def_144x142_AP
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/gcm.def_144x142_AP	(revision 3559)
+++ CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/gcm.def_144x142_AP	(revision 3559)
@@ -0,0 +1,56 @@
+## $Id$
+## nombre de pas par jour (multiple de iperiod) ( day_step=720 => dt=2min )      
+day_step=720
+## periode pour le pas Matsuno (en pas)
+iperiod=5
+## choix de l'operateur de dissipation (star ou  non star )
+lstardis=y
+## nombre d'iterations de l'operateur de dissipation   gradiv
+nitergdiv=1
+## nombre d'iterations de l'operateur de dissipation  nxgradrot
+nitergrot=2
+## nombre d'iterations de l'operateur de dissipation  divgrad            
+niterh=2
+## temps de dissipation des plus petites long.d ondes pour u,v (gradiv)  
+tetagdiv=3600.
+## temps de dissipation des plus petites long.d ondes pour u,v(nxgradrot)
+tetagrot=7200.
+## temps de dissipation des plus petites long.d ondes pour  h ( divgrad) 
+tetatemp=7200.
+## coefficient pour gamdissip                                            
+coefdis=0.
+## choix du shema d'integration temporelle (Matsuno:y ou Matsuno-leapfrog:n) 
+purmats=n
+## avec ou sans physique
+## 0: pas de physique (e.g. en mode Shallow Water)
+## 1: avec physique (e.g. physique phylmd)
+## 2: avec rappel newtonien dans la dynamique                                         
+iflag_phys=1
+## avec ou sans fichiers de demarrage (start.nc, startphy.nc) ?
+## (sans fichiers de demarrage, initialisation des champs par iniacademic
+##  dans la dynamique)
+read_start=y
+## periode de la physique (en pas dynamiques, n'a de sens que si iflag_phys=1)                                       
+iphysiq=15
+## longitude en degres du centre du zoom                                 
+clon=0.
+## latitude en degres du centre du zoom                                  
+clat=0.
+## facteur de grossissement du zoom,selon longitude                      
+grossismx=1.0
+## facteur de grossissement du zoom ,selon latitude                      
+grossismy=1.0
+##  Fonction  f(y)  hyperbolique  si = .true.  , sinon  sinusoidale         
+fxyhypb=y
+## extension en longitude  de la zone du zoom  ( fraction de la zone totale)
+dzoomx=0.0
+## extension en latitude de la zone  du zoom  ( fraction de la zone totale)
+dzoomy=0.0
+##raideur du zoom en  X
+taux=3.
+##raideur du zoom en  Y
+tauy=3.
+##  Fonction  f(y) avec y = Sin(latit.) si = .true. , sinon y = latit.         
+ysinus=y
+##
+ngroup=4
Index: CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/gcm.def_144x142_NPv3.2
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/gcm.def_144x142_NPv3.2	(revision 3559)
+++ CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/gcm.def_144x142_NPv3.2	(revision 3559)
@@ -0,0 +1,56 @@
+## $Id$
+## nombre de pas par jour (multiple de iperiod) ( day_step=720 => dt=2min )
+day_step=720
+## periode pour le pas Matsuno (en pas)
+iperiod=5
+## choix de l'operateur de dissipation (star ou  non star )
+lstardis=y
+## nombre d'iterations de l'operateur de dissipation   gradiv
+nitergdiv=1
+## nombre d'iterations de l'operateur de dissipation  nxgradrot
+nitergrot=2
+## nombre d'iterations de l'operateur de dissipation  divgrad            
+niterh=2
+## temps de dissipation des plus petites long.d ondes pour u,v (gradiv)  
+tetagdiv=3600.
+## temps de dissipation des plus petites long.d ondes pour u,v(nxgradrot)
+tetagrot=7200.
+## temps de dissipation des plus petites long.d ondes pour  h ( divgrad) 
+tetatemp=7200.
+## coefficient pour gamdissip                                            
+coefdis=0.
+## choix du shema d'integration temporelle (Matsuno:y ou Matsuno-leapfrog:n) 
+purmats=n
+## avec ou sans physique
+## 0: pas de physique (e.g. en mode Shallow Water)
+## 1: avec physique (e.g. physique phylmd)
+## 2: avec rappel newtonien dans la dynamique                                         
+iflag_phys=1
+## avec ou sans fichiers de demarrage (start.nc, startphy.nc) ?
+## (sans fichiers de demarrage, initialisation des champs par iniacademic
+##  dans la dynamique)
+read_start=y
+## periode de la physique (en pas dynamiques, n'a de sens que si iflag_phys=1)                                       
+iphysiq=5
+## longitude en degres du centre du zoom                                 
+clon=0.
+## latitude en degres du centre du zoom                                  
+clat=0.
+## facteur de grossissement du zoom,selon longitude                      
+grossismx=1.0
+## facteur de grossissement du zoom ,selon latitude                      
+grossismy=1.0
+##  Fonction  f(y)  hyperbolique  si = .true.  , sinon  sinusoidale         
+fxyhypb=y
+## extension en longitude  de la zone du zoom  ( fraction de la zone totale)
+dzoomx=0.0
+## extension en latitude de la zone  du zoom  ( fraction de la zone totale)
+dzoomy=0.0
+##raideur du zoom en  X
+taux=3.
+##raideur du zoom en  Y
+tauy=3.
+##  Fonction  f(y) avec y = Sin(latit.) si = .true. , sinon y = latit.         
+ysinus=y
+##
+ngroup=4
Index: CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/gcm.def_144x142_NPv5.70
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/gcm.def_144x142_NPv5.70	(revision 3559)
+++ CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/gcm.def_144x142_NPv5.70	(revision 3559)
@@ -0,0 +1,56 @@
+## $Id$
+## nombre de pas par jour (multiple de iperiod) ( day_step=720 => dt=2min )
+day_step=720
+## periode pour le pas Matsuno (en pas)
+iperiod=5
+## choix de l'operateur de dissipation (star ou  non star )
+lstardis=y
+## nombre d'iterations de l'operateur de dissipation   gradiv
+nitergdiv=1
+## nombre d'iterations de l'operateur de dissipation  nxgradrot
+nitergrot=2
+## nombre d'iterations de l'operateur de dissipation  divgrad            
+niterh=2
+## temps de dissipation des plus petites long.d ondes pour u,v (gradiv)  
+tetagdiv=3600.
+## temps de dissipation des plus petites long.d ondes pour u,v(nxgradrot)
+tetagrot=7200.
+## temps de dissipation des plus petites long.d ondes pour  h ( divgrad) 
+tetatemp=7200.
+## coefficient pour gamdissip                                            
+coefdis=0.
+## choix du shema d'integration temporelle (Matsuno:y ou Matsuno-leapfrog:n) 
+purmats=n
+## avec ou sans physique
+## 0: pas de physique (e.g. en mode Shallow Water)
+## 1: avec physique (e.g. physique phylmd)
+## 2: avec rappel newtonien dans la dynamique                                         
+iflag_phys=1
+## avec ou sans fichiers de demarrage (start.nc, startphy.nc) ?
+## (sans fichiers de demarrage, initialisation des champs par iniacademic
+##  dans la dynamique)
+read_start=y
+## periode de la physique (en pas dynamiques, n'a de sens que si iflag_phys=1)                                       
+iphysiq=5
+## longitude en degres du centre du zoom                                 
+clon=0.
+## latitude en degres du centre du zoom                                  
+clat=0.
+## facteur de grossissement du zoom,selon longitude                      
+grossismx=1.0
+## facteur de grossissement du zoom ,selon latitude                      
+grossismy=1.0
+##  Fonction  f(y)  hyperbolique  si = .true.  , sinon  sinusoidale         
+fxyhypb=y
+## extension en longitude  de la zone du zoom  ( fraction de la zone totale)
+dzoomx=0.0
+## extension en latitude de la zone  du zoom  ( fraction de la zone totale)
+dzoomy=0.0
+##raideur du zoom en  X
+taux=3.
+##raideur du zoom en  Y
+tauy=3.
+##  Fonction  f(y) avec y = Sin(latit.) si = .true. , sinon y = latit.         
+ysinus=y
+##
+ngroup=4
Index: CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/gcm.def_144x142_NPv5.80b
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/gcm.def_144x142_NPv5.80b	(revision 3559)
+++ CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/gcm.def_144x142_NPv5.80b	(revision 3559)
@@ -0,0 +1,56 @@
+## $Id$
+## nombre de pas par jour (multiple de iperiod) ( day_step=960 => dt=1.5min )
+day_step=960
+## periode pour le pas Matsuno (en pas)
+iperiod=5
+## choix de l'operateur de dissipation (star ou  non star )
+lstardis=y
+## nombre d'iterations de l'operateur de dissipation   gradiv
+nitergdiv=1
+## nombre d'iterations de l'operateur de dissipation  nxgradrot
+nitergrot=2
+## nombre d'iterations de l'operateur de dissipation  divgrad            
+niterh=2
+## temps de dissipation des plus petites long.d ondes pour u,v (gradiv)  
+tetagdiv=3600.
+## temps de dissipation des plus petites long.d ondes pour u,v(nxgradrot)
+tetagrot=7200.
+## temps de dissipation des plus petites long.d ondes pour  h ( divgrad) 
+tetatemp=7200.
+## coefficient pour gamdissip                                            
+coefdis=0.
+## choix du shema d'integration temporelle (Matsuno:y ou Matsuno-leapfrog:n) 
+purmats=n
+## avec ou sans physique
+## 0: pas de physique (e.g. en mode Shallow Water)
+## 1: avec physique (e.g. physique phylmd)
+## 2: avec rappel newtonien dans la dynamique                                         
+iflag_phys=1
+## avec ou sans fichiers de demarrage (start.nc, startphy.nc) ?
+## (sans fichiers de demarrage, initialisation des champs par iniacademic
+##  dans la dynamique)
+read_start=y
+## periode de la physique (en pas dynamiques, n'a de sens que si iflag_phys=1)                                       
+iphysiq=10
+## longitude en degres du centre du zoom                                 
+clon=0.
+## latitude en degres du centre du zoom                                  
+clat=0.
+## facteur de grossissement du zoom,selon longitude                      
+grossismx=1.0
+## facteur de grossissement du zoom ,selon latitude                      
+grossismy=1.0
+##  Fonction  f(y)  hyperbolique  si = .true.  , sinon  sinusoidale         
+fxyhypb=y
+## extension en longitude  de la zone du zoom  ( fraction de la zone totale)
+dzoomx=0.0
+## extension en latitude de la zone  du zoom  ( fraction de la zone totale)
+dzoomy=0.0
+##raideur du zoom en  X
+taux=3.
+##raideur du zoom en  Y
+tauy=3.
+##  Fonction  f(y) avec y = Sin(latit.) si = .true. , sinon y = latit.         
+ysinus=y
+##
+ngroup=4
Index: CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/gcm.def_144x142_NPv5.80bz0
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/gcm.def_144x142_NPv5.80bz0	(revision 3559)
+++ CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/gcm.def_144x142_NPv5.80bz0	(revision 3559)
@@ -0,0 +1,56 @@
+## $Id$
+## nombre de pas par jour (multiple de iperiod) ( day_step=960 => dt=1.5min )
+day_step=960
+## periode pour le pas Matsuno (en pas)
+iperiod=5
+## choix de l'operateur de dissipation (star ou  non star )
+lstardis=y
+## nombre d'iterations de l'operateur de dissipation   gradiv
+nitergdiv=1
+## nombre d'iterations de l'operateur de dissipation  nxgradrot
+nitergrot=2
+## nombre d'iterations de l'operateur de dissipation  divgrad            
+niterh=2
+## temps de dissipation des plus petites long.d ondes pour u,v (gradiv)  
+tetagdiv=3600.
+## temps de dissipation des plus petites long.d ondes pour u,v(nxgradrot)
+tetagrot=7200.
+## temps de dissipation des plus petites long.d ondes pour  h ( divgrad) 
+tetatemp=7200.
+## coefficient pour gamdissip                                            
+coefdis=0.
+## choix du shema d'integration temporelle (Matsuno:y ou Matsuno-leapfrog:n) 
+purmats=n
+## avec ou sans physique
+## 0: pas de physique (e.g. en mode Shallow Water)
+## 1: avec physique (e.g. physique phylmd)
+## 2: avec rappel newtonien dans la dynamique                                         
+iflag_phys=1
+## avec ou sans fichiers de demarrage (start.nc, startphy.nc) ?
+## (sans fichiers de demarrage, initialisation des champs par iniacademic
+##  dans la dynamique)
+read_start=y
+## periode de la physique (en pas dynamiques, n'a de sens que si iflag_phys=1)                                       
+iphysiq=10
+## longitude en degres du centre du zoom                                 
+clon=0.
+## latitude en degres du centre du zoom                                  
+clat=0.
+## facteur de grossissement du zoom,selon longitude                      
+grossismx=1.0
+## facteur de grossissement du zoom ,selon latitude                      
+grossismy=1.0
+##  Fonction  f(y)  hyperbolique  si = .true.  , sinon  sinusoidale         
+fxyhypb=y
+## extension en longitude  de la zone du zoom  ( fraction de la zone totale)
+dzoomx=0.0
+## extension en latitude de la zone  du zoom  ( fraction de la zone totale)
+dzoomy=0.0
+##raideur du zoom en  X
+taux=3.
+##raideur du zoom en  Y
+tauy=3.
+##  Fonction  f(y) avec y = Sin(latit.) si = .true. , sinon y = latit.         
+ysinus=y
+##
+ngroup=4
Index: CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/gcm.def_144x142_NPv6.0.10
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/gcm.def_144x142_NPv6.0.10	(revision 3559)
+++ CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/gcm.def_144x142_NPv6.0.10	(revision 3559)
@@ -0,0 +1,56 @@
+## $Id: gcm.def_144x142_NPv6.0.9 3154 2017-03-01 20:15:12Z aclsce $
+## nombre de pas par jour (multiple de iperiod) ( day_step=960 => dt=1.5min )
+day_step=672
+## periode pour le pas Matsuno (en pas)
+iperiod=7
+## choix de l'operateur de dissipation (star ou  non star )
+lstardis=y
+## nombre d'iterations de l'operateur de dissipation   gradiv
+nitergdiv=1
+## nombre d'iterations de l'operateur de dissipation  nxgradrot
+nitergrot=2
+## nombre d'iterations de l'operateur de dissipation  divgrad            
+niterh=2
+## temps de dissipation des plus petites long.d ondes pour u,v (gradiv)  
+tetagdiv=3600.
+## temps de dissipation des plus petites long.d ondes pour u,v(nxgradrot)
+tetagrot=21600.
+## temps de dissipation des plus petites long.d ondes pour  h ( divgrad) 
+tetatemp=10800.
+## coefficient pour gamdissip                                            
+coefdis=0.
+## choix du shema d'integration temporelle (Matsuno:y ou Matsuno-leapfrog:n) 
+purmats=n
+## avec ou sans physique
+## 0: pas de physique (e.g. en mode Shallow Water)
+## 1: avec physique (e.g. physique phylmd)
+## 2: avec rappel newtonien dans la dynamique                                         
+iflag_phys=1
+## avec ou sans fichiers de demarrage (start.nc, startphy.nc) ?
+## (sans fichiers de demarrage, initialisation des champs par iniacademic
+##  dans la dynamique)
+read_start=y
+## periode de la physique (en pas dynamiques, n'a de sens que si iflag_phys=1)                                       
+iphysiq=7
+## longitude en degres du centre du zoom                                 
+clon=0.
+## latitude en degres du centre du zoom                                  
+clat=0.
+## facteur de grossissement du zoom,selon longitude                      
+grossismx=1.0
+## facteur de grossissement du zoom ,selon latitude                      
+grossismy=1.0
+##  Fonction  f(y)  hyperbolique  si = .true.  , sinon  sinusoidale         
+fxyhypb=y
+## extension en longitude  de la zone du zoom  ( fraction de la zone totale)
+dzoomx=0.0
+## extension en latitude de la zone  du zoom  ( fraction de la zone totale)
+dzoomy=0.0
+##raideur du zoom en  X
+taux=3.
+##raideur du zoom en  Y
+tauy=3.
+##  Fonction  f(y) avec y = Sin(latit.) si = .true. , sinon y = latit.         
+ysinus=y
+##
+ngroup=4
Index: CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/gcm.def_144x142_NPv6.0.11
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/gcm.def_144x142_NPv6.0.11	(revision 3559)
+++ CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/gcm.def_144x142_NPv6.0.11	(revision 3559)
@@ -0,0 +1,56 @@
+## $Id: gcm.def_144x142_NPv6.0.9 3154 2017-03-01 20:15:12Z aclsce $
+## nombre de pas par jour (multiple de iperiod) ( day_step=960 => dt=1.5min )
+day_step=672
+## periode pour le pas Matsuno (en pas)
+iperiod=7
+## choix de l'operateur de dissipation (star ou  non star )
+lstardis=y
+## nombre d'iterations de l'operateur de dissipation   gradiv
+nitergdiv=1
+## nombre d'iterations de l'operateur de dissipation  nxgradrot
+nitergrot=2
+## nombre d'iterations de l'operateur de dissipation  divgrad            
+niterh=2
+## temps de dissipation des plus petites long.d ondes pour u,v (gradiv)  
+tetagdiv=3600.
+## temps de dissipation des plus petites long.d ondes pour u,v(nxgradrot)
+tetagrot=21600.
+## temps de dissipation des plus petites long.d ondes pour  h ( divgrad) 
+tetatemp=10800.
+## coefficient pour gamdissip                                            
+coefdis=0.
+## choix du shema d'integration temporelle (Matsuno:y ou Matsuno-leapfrog:n) 
+purmats=n
+## avec ou sans physique
+## 0: pas de physique (e.g. en mode Shallow Water)
+## 1: avec physique (e.g. physique phylmd)
+## 2: avec rappel newtonien dans la dynamique                                         
+iflag_phys=1
+## avec ou sans fichiers de demarrage (start.nc, startphy.nc) ?
+## (sans fichiers de demarrage, initialisation des champs par iniacademic
+##  dans la dynamique)
+read_start=y
+## periode de la physique (en pas dynamiques, n'a de sens que si iflag_phys=1)                                       
+iphysiq=7
+## longitude en degres du centre du zoom                                 
+clon=0.
+## latitude en degres du centre du zoom                                  
+clat=0.
+## facteur de grossissement du zoom,selon longitude                      
+grossismx=1.0
+## facteur de grossissement du zoom ,selon latitude                      
+grossismy=1.0
+##  Fonction  f(y)  hyperbolique  si = .true.  , sinon  sinusoidale         
+fxyhypb=y
+## extension en longitude  de la zone du zoom  ( fraction de la zone totale)
+dzoomx=0.0
+## extension en latitude de la zone  du zoom  ( fraction de la zone totale)
+dzoomy=0.0
+##raideur du zoom en  X
+taux=3.
+##raideur du zoom en  Y
+tauy=3.
+##  Fonction  f(y) avec y = Sin(latit.) si = .true. , sinon y = latit.         
+ysinus=y
+##
+ngroup=4
Index: CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/gcm.def_144x142_NPv6.0.12
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/gcm.def_144x142_NPv6.0.12	(revision 3559)
+++ CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/gcm.def_144x142_NPv6.0.12	(revision 3559)
@@ -0,0 +1,57 @@
+## $Id: gcm.def_144x142_NPv6.0.12 3154 2017-03-01 20:15:12Z aclsce $
+## nombre de pas par jour (multiple de iperiod) 
+## ( day_step=672 => dt=2.15min or 15mn/7, physique toutes les 15 mn )
+day_step=672
+## periode pour le pas Matsuno (en pas)
+iperiod=7
+## choix de l'operateur de dissipation (star ou  non star )
+lstardis=y
+## nombre d'iterations de l'operateur de dissipation   gradiv
+nitergdiv=1
+## nombre d'iterations de l'operateur de dissipation  nxgradrot
+nitergrot=2
+## nombre d'iterations de l'operateur de dissipation  divgrad            
+niterh=2
+## temps de dissipation des plus petites long.d ondes pour u,v (gradiv)  
+tetagdiv=3600.
+## temps de dissipation des plus petites long.d ondes pour u,v(nxgradrot)
+tetagrot=21600.
+## temps de dissipation des plus petites long.d ondes pour  h ( divgrad) 
+tetatemp=10800.
+## coefficient pour gamdissip                                            
+coefdis=0.
+## choix du shema d'integration temporelle (Matsuno:y ou Matsuno-leapfrog:n) 
+purmats=n
+## avec ou sans physique
+## 0: pas de physique (e.g. en mode Shallow Water)
+## 1: avec physique (e.g. physique phylmd)
+## 2: avec rappel newtonien dans la dynamique                                         
+iflag_phys=1
+## avec ou sans fichiers de demarrage (start.nc, startphy.nc) ?
+## (sans fichiers de demarrage, initialisation des champs par iniacademic
+##  dans la dynamique)
+read_start=y
+## periode de la physique (en pas dynamiques, n'a de sens que si iflag_phys=1)                                       
+iphysiq=7
+## longitude en degres du centre du zoom                                 
+clon=0.
+## latitude en degres du centre du zoom                                  
+clat=0.
+## facteur de grossissement du zoom,selon longitude                      
+grossismx=1.0
+## facteur de grossissement du zoom ,selon latitude                      
+grossismy=1.0
+##  Fonction  f(y)  hyperbolique  si = .true.  , sinon  sinusoidale         
+fxyhypb=y
+## extension en longitude  de la zone du zoom  ( fraction de la zone totale)
+dzoomx=0.0
+## extension en latitude de la zone  du zoom  ( fraction de la zone totale)
+dzoomy=0.0
+##raideur du zoom en  X
+taux=3.
+##raideur du zoom en  Y
+tauy=3.
+##  Fonction  f(y) avec y = Sin(latit.) si = .true. , sinon y = latit.         
+ysinus=y
+##
+ngroup=4
Index: CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/gcm.def_144x142_NPv6.0.12ttop
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/gcm.def_144x142_NPv6.0.12ttop	(revision 3559)
+++ CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/gcm.def_144x142_NPv6.0.12ttop	(revision 3559)
@@ -0,0 +1,57 @@
+## $Id: gcm.def_144x142_NPv6.0.12 3154 2017-03-01 20:15:12Z aclsce $
+## nombre de pas par jour (multiple de iperiod) 
+## ( day_step=672 => dt=2.15min or 15mn/7, physique toutes les 15 mn )
+day_step=672
+## periode pour le pas Matsuno (en pas)
+iperiod=7
+## choix de l'operateur de dissipation (star ou  non star )
+lstardis=y
+## nombre d'iterations de l'operateur de dissipation   gradiv
+nitergdiv=1
+## nombre d'iterations de l'operateur de dissipation  nxgradrot
+nitergrot=2
+## nombre d'iterations de l'operateur de dissipation  divgrad            
+niterh=2
+## temps de dissipation des plus petites long.d ondes pour u,v (gradiv)  
+tetagdiv=3600.
+## temps de dissipation des plus petites long.d ondes pour u,v(nxgradrot)
+tetagrot=21600.
+## temps de dissipation des plus petites long.d ondes pour  h ( divgrad) 
+tetatemp=10800.
+## coefficient pour gamdissip                                            
+coefdis=0.
+## choix du shema d'integration temporelle (Matsuno:y ou Matsuno-leapfrog:n) 
+purmats=n
+## avec ou sans physique
+## 0: pas de physique (e.g. en mode Shallow Water)
+## 1: avec physique (e.g. physique phylmd)
+## 2: avec rappel newtonien dans la dynamique                                         
+iflag_phys=1
+## avec ou sans fichiers de demarrage (start.nc, startphy.nc) ?
+## (sans fichiers de demarrage, initialisation des champs par iniacademic
+##  dans la dynamique)
+read_start=y
+## periode de la physique (en pas dynamiques, n'a de sens que si iflag_phys=1)                                       
+iphysiq=7
+## longitude en degres du centre du zoom                                 
+clon=0.
+## latitude en degres du centre du zoom                                  
+clat=0.
+## facteur de grossissement du zoom,selon longitude                      
+grossismx=1.0
+## facteur de grossissement du zoom ,selon latitude                      
+grossismy=1.0
+##  Fonction  f(y)  hyperbolique  si = .true.  , sinon  sinusoidale         
+fxyhypb=y
+## extension en longitude  de la zone du zoom  ( fraction de la zone totale)
+dzoomx=0.0
+## extension en latitude de la zone  du zoom  ( fraction de la zone totale)
+dzoomy=0.0
+##raideur du zoom en  X
+taux=3.
+##raideur du zoom en  Y
+tauy=3.
+##  Fonction  f(y) avec y = Sin(latit.) si = .true. , sinon y = latit.         
+ysinus=y
+##
+ngroup=4
Index: CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/gcm.def_144x142_NPv6.0.7
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/gcm.def_144x142_NPv6.0.7	(revision 3559)
+++ CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/gcm.def_144x142_NPv6.0.7	(revision 3559)
@@ -0,0 +1,1 @@
+link gcm.def_144x142_NPv5.80b
Index: CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/gcm.def_144x142_NPv6.0.8
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/gcm.def_144x142_NPv6.0.8	(revision 3559)
+++ CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/gcm.def_144x142_NPv6.0.8	(revision 3559)
@@ -0,0 +1,56 @@
+## $Id: gcm.def_144x142_NPv6.0.8 3133 2017-02-15 14:13:49Z jgipsl $
+## nombre de pas par jour (multiple de iperiod) ( day_step=960 => dt=1.5min )
+day_step=960
+## periode pour le pas Matsuno (en pas)
+iperiod=5
+## choix de l'operateur de dissipation (star ou  non star )
+lstardis=y
+## nombre d'iterations de l'operateur de dissipation   gradiv
+nitergdiv=1
+## nombre d'iterations de l'operateur de dissipation  nxgradrot
+nitergrot=2
+## nombre d'iterations de l'operateur de dissipation  divgrad            
+niterh=2
+## temps de dissipation des plus petites long.d ondes pour u,v (gradiv)  
+tetagdiv=3600.
+## temps de dissipation des plus petites long.d ondes pour u,v(nxgradrot)
+tetagrot=21600.
+## temps de dissipation des plus petites long.d ondes pour  h ( divgrad) 
+tetatemp=10800.
+## coefficient pour gamdissip                                            
+coefdis=0.
+## choix du shema d'integration temporelle (Matsuno:y ou Matsuno-leapfrog:n) 
+purmats=n
+## avec ou sans physique
+## 0: pas de physique (e.g. en mode Shallow Water)
+## 1: avec physique (e.g. physique phylmd)
+## 2: avec rappel newtonien dans la dynamique                                         
+iflag_phys=1
+## avec ou sans fichiers de demarrage (start.nc, startphy.nc) ?
+## (sans fichiers de demarrage, initialisation des champs par iniacademic
+##  dans la dynamique)
+read_start=y
+## periode de la physique (en pas dynamiques, n'a de sens que si iflag_phys=1)                                       
+iphysiq=10
+## longitude en degres du centre du zoom                                 
+clon=0.
+## latitude en degres du centre du zoom                                  
+clat=0.
+## facteur de grossissement du zoom,selon longitude                      
+grossismx=1.0
+## facteur de grossissement du zoom ,selon latitude                      
+grossismy=1.0
+##  Fonction  f(y)  hyperbolique  si = .true.  , sinon  sinusoidale         
+fxyhypb=y
+## extension en longitude  de la zone du zoom  ( fraction de la zone totale)
+dzoomx=0.0
+## extension en latitude de la zone  du zoom  ( fraction de la zone totale)
+dzoomy=0.0
+##raideur du zoom en  X
+taux=3.
+##raideur du zoom en  Y
+tauy=3.
+##  Fonction  f(y) avec y = Sin(latit.) si = .true. , sinon y = latit.         
+ysinus=y
+##
+ngroup=4
Index: CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/gcm.def_96x95_AP
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/gcm.def_96x95_AP	(revision 3559)
+++ CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/gcm.def_96x95_AP	(revision 3559)
@@ -0,0 +1,47 @@
+## $Id$
+## nombre de pas par jour (multiple de iperiod) ( day_step=480 => dt=3min )
+day_step=480
+## periode pour le pas Matsuno (en pas)
+iperiod=5
+## choix de l'operateur de dissipation (star ou  non star )
+lstardis=y
+## nombre d'iterations de l'operateur de dissipation   gradiv
+nitergdiv=1
+## nombre d'iterations de l'operateur de dissipation  nxgradrot
+nitergrot=2
+## nombre d'iterations de l'operateur de dissipation  divgrad            
+niterh=2
+## temps de dissipation des plus petites long.d ondes pour u,v (gradiv)  
+tetagdiv=5400.
+## temps de dissipation des plus petites long.d ondes pour u,v(nxgradrot)
+tetagrot=5400.
+## temps de dissipation des plus petites long.d ondes pour  h ( divgrad) 
+tetatemp=5400.
+## coefficient pour gamdissip                                            
+coefdis=0.
+## choix du shema d'integration temporelle (Matsuno ou Matsuno-leapfrog) 
+purmats=n
+## avec ou sans physique                                                 
+physic=y
+## periode de la physique (en pas)                                       
+iphysiq=10
+## longitude en degres du centre du zoom                                 
+clon=0.
+## latitude en degres du centre du zoom                                  
+clat=0.
+## facteur de grossissement du zoom,selon longitude                      
+grossismx=1.0
+## facteur de grossissement du zoom ,selon latitude                      
+grossismy=1.0
+##  Fonction  f(y)  hyperbolique  si = .true.  , sinon  sinusoidale         
+fxyhypb=y
+## extension en longitude  de la zone du zoom  ( fraction de la zone totale)
+dzoomx=0.0
+## extension en latitude de la zone  du zoom  ( fraction de la zone totale)
+dzoomy=0.0
+##raideur du zoom en  X
+taux=3.
+##raideur du zoom en  Y
+tauy=3.
+##  Fonction  f(y) avec y = Sin(latit.) si = .true. , sinon y = latit.         
+ysinus=y
Index: CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/gcm.def_96x95_NPv3.2
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/gcm.def_96x95_NPv3.2	(revision 3559)
+++ CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/gcm.def_96x95_NPv3.2	(revision 3559)
@@ -0,0 +1,47 @@
+## $Id$
+## nombre de pas par jour (multiple de iperiod) ( day_step=480 => dt=3min )      
+day_step=480
+## periode pour le pas Matsuno (en pas)
+iperiod=5
+## choix de l'operateur de dissipation (star ou  non star )
+lstardis=y
+## nombre d'iterations de l'operateur de dissipation   gradiv
+nitergdiv=1
+## nombre d'iterations de l'operateur de dissipation  nxgradrot
+nitergrot=2
+## nombre d'iterations de l'operateur de dissipation  divgrad            
+niterh=2
+## temps de dissipation des plus petites long.d ondes pour u,v (gradiv)  
+tetagdiv=5400.
+## temps de dissipation des plus petites long.d ondes pour u,v(nxgradrot)
+tetagrot=5400.
+## temps de dissipation des plus petites long.d ondes pour  h ( divgrad) 
+tetatemp=5400.
+## coefficient pour gamdissip                                            
+coefdis=0.
+## choix du shema d'integration temporelle (Matsuno ou Matsuno-leapfrog) 
+purmats=n
+## avec ou sans physique                                                 
+physic=y
+## periode de la physique (en pas)                                       
+iphysiq=5
+## longitude en degres du centre du zoom                                 
+clon=0.
+## latitude en degres du centre du zoom                                  
+clat=0.
+## facteur de grossissement du zoom,selon longitude                      
+grossismx=1.0
+## facteur de grossissement du zoom ,selon latitude                      
+grossismy=1.0
+##  Fonction  f(y)  hyperbolique  si = .true.  , sinon  sinusoidale         
+fxyhypb=y
+## extension en longitude  de la zone du zoom  ( fraction de la zone totale)
+dzoomx=0.0
+## extension en latitude de la zone  du zoom  ( fraction de la zone totale)
+dzoomy=0.0
+##raideur du zoom en  X
+taux=3.
+##raideur du zoom en  Y
+tauy=3.
+##  Fonction  f(y) avec y = Sin(latit.) si = .true. , sinon y = latit.         
+ysinus=y
Index: CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/guide.def
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/guide.def	(revision 3559)
+++ CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/guide.def	(revision 3559)
@@ -0,0 +1,16 @@
+# ok_guide=y : guidage active
+ok_guide=_AUTO_ : DEFFAULT = n
+#
+guide_u= y
+guide_v= y
+guide_T= n
+guide_P= n
+guide_Q= n
+
+ini_anal=n
+tau_min_u=0.0208333
+tau_max_u=0.125
+tau_min_v=0.0208333
+tau_max_v=0.125
+#tau_min_T=0.0208333
+#tau_max_T=10
Index: CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/inca.def
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/inca.def	(revision 3559)
+++ CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/inca.def	(revision 3559)
@@ -0,0 +1,28 @@
+#######################################################################
+# parametres pour INCA
+#######################################################################
+#LMDZ_10m_winds=y --> use 10m wind from LMDZ, =n --> use 10m wind from output file
+LMDZ_10m_winds=_AUTO_
+10m_winds_method=_AUTO_
+#freq_write_chem --> write frequency for inca_inst and inca_avgr (86400 = 1/day)
+freq_write_chem=_AUTO_
+#choose if there is a feedback with the areosol effect
+feedb=_AUTO_
+#indicate if we are running with xios and/or ioipsl
+XIOS_INCA_OK=_AUTO_
+IOIPSL_INCA_OK=_AUTO_
+#weibull 10m wind parameter
+kref=4.0
+#threshold 10m wind parameter
+tref=0.85
+#sedimentation 
+multilayer_sediment=_AUTO_
+#coupled model with orchidee
+CoupOrchInca=_AUTO_
+#use or not the deposition from orchidee
+DepOrch=n
+# uncomment two next line if we want to coupled with orchidee without transfer any flux
+#nbFlux_FromOrch=0
+#emi_FromOrch=
+#output diagnostic for chemistry flux
+calcul_flux=_AUTO_
Index: CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/iodef.xml
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/iodef.xml	(revision 3559)
+++ CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/iodef.xml	(revision 3559)
@@ -0,0 +1,30 @@
+<?xml version="1.0"?>
+<!-- =========================================================================================================== -->
+<!-- iodef.xml : Configuration file for production of output files using XIOS                                    -->
+<!--             This file contains the context XIOS.                                                            -->
+<!--             The model components context will be add automatically by the comp.driver                       -->
+<!-- =========================================================================================================== -->
+
+<simulation>
+
+  <!-- =========================================================================================================== -->
+  <!-- XIOS context                                                                                                -->
+  <!-- =========================================================================================================== -->
+  <context id="xios">
+
+    <variable_definition>	
+      <variable id="optimal_buffer_size" type="string">performance</variable>
+      <variable id="buffer_size_factor" type="double">2.0</variable>
+      <variable id="min_buffer_size" type="int">10000000</variable>
+      <variable id="info_level"            type="int">1</variable>
+      <variable id="using_server"          type="bool">false</variable>
+      <variable id="using_oasis"           type="bool">false</variable>
+      <variable id="oasis_codes_id"        type="string" >LMDZ,oceanx</variable>	
+    </variable_definition>
+    
+  </context>
+
+  <!-- =========================================================================================================== -->
+  <!-- COMPONENT CONTEXT : the model components context will be add automatically by the comp.driver               -->
+  
+</simulation>
Index: CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/orchidee.def_CWRR
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/orchidee.def_CWRR	(revision 3559)
+++ CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/orchidee.def_CWRR	(revision 3559)
@@ -0,0 +1,133 @@
+#
+#**************************************************************************
+#                    Parameter file list for ORCHIDEE
+#**************************************************************************
+
+# Input and output
+#**************************************************************************
+# Restart the time from the GCM. 
+# default = n
+SECHIBA_reset_time = y
+
+# Name of restart to read for initial conditions
+# default = NONE
+SECHIBA_restart_in = _AUTOBLOCKER_
+
+# Name of restart to read for initial conditions of STOMATE
+# default = NONE
+STOMATE_RESTART_FILEIN = _AUTOBLOCKER_
+
+# Use XIOS for writing diagnostics file
+# defulat = n
+XIOS_ORCHIDEE_OK = y
+
+# Writefrequency in seconds in sechiba_history.nc
+# default = 86400.0
+WRITE_STEP = 0
+
+# Hydrology parameters
+#**************************************************************************
+# Activate the multi-layer diffusion scheme adapted from CWRR
+# by default the Choisnel hydrology is used.
+# default = n
+HYDROL_CWRR = y
+
+# Activate river routing
+# default = n
+RIVER_ROUTING = y
+
+# SOILTYPE_CLASSIF :  Type of classification used for the map of soil types (default zobler)
+SOILTYPE_CLASSIF = usda 
+SOILALB_FILE     = soils_param.nc
+SOILCLASS_FILE   = soils_param_usdatop.nc
+
+# DO_RSOIL : Reduce soil evaporation with a soil resistance
+DO_RSOIL=n
+
+#**************************************************************************
+# Activate Stomate component
+# default = n
+STOMATE_OK_STOMATE = _AUTOBLOCKER_ 
+
+# Activate calculations of CO2 according to Farqhuar and Ball
+# default = n
+STOMATE_OK_CO2 = y
+
+# Use cdrag coefficient from gcm
+CDRAG_FROM_GCM = y
+
+# Interception reservoir coefficient.
+# default = 0.1
+SECHIBA_QSINT = 0.02
+
+# STRESS_GS, STRESS_GM, STRESS_VCMAX : Stress on GS, GM and VCMAX
+STRESS_GS=1.,1.,1.,1.,1.,1.,1.,1.,1.,1.,1.,1.,1.
+STRESS_GM=1.,1.,1.,1.,1.,1.,1.,1.,1.,1.,1.,1.,1.
+STRESS_VCMAX=0.,0.,0.,0.,0.,0.,0.,0.,0.,0.,1.,0.,1.
+
+# Optimized parameters for albedo
+ALB_LEAF_NIR = 0., 0.23, 0.18, 0.18, 0.20, 0.24, 0.15, 0.26, 0.20, 0.24, 0.27, 0.28, 0.26
+ALB_LEAF_VIS = 0., 0.04, 0.04, 0.04, 0.04, 0.03, 0.03, 0.03, 0.03, 0.06, 0.06, 0.06, 0.06
+SNOWA_AGED_NIR = 0.50, 0, 0, 0.10, 0.37, 0.08, 0.16, 0.17, 0.27, 0.44, 0.44, 0.44, 0.44
+SNOWA_DEC_NIR = 0.13, 0, 0, 0.10, 0.10, 0.16, 0.04, 0.07, 0.08, 0.12, 0.12, 0.12, 0.12
+SNOWA_AGED_VIS = 0.74, 0, 0, 0.08, 0.24, 0.07, 0.18, 0.18, 0.33, 0.57, 0.57, 0.57, 0.57
+SNOWA_DEC_VIS = 0.21, 0, 0, 0.14, 0.08, 0.17, 0.05, 0.06, 0.09, 0.15, 0.15, 0.15, 0.15
+
+# Parameters related to vegetation map
+#**************************************************************************
+# Year of the land_use vegetation map readed
+# year off the pft map
+# default = 282
+VEGET_YEAR = 1
+
+# The parameter is used to bypass veget_year count 
+# and reinitialize it with VEGET_YEAR parameter.
+# Then it is possible to change LAND USE file.
+# If LAND_USE
+# default = y
+VEGET_REINIT = n
+
+# Update vegetation frequency (since 2.0 version)
+# The veget datas will be update at this period if LAND_USE
+# default = 1Y
+VEGET_UPDATE = _AUTO_
+
+# Do not use default fire module
+FIRE_DISABLE = y
+
+# Create river description file
+RIVER_DESC = _AUTO_
+RIVER_DESC_FILE =  river_desc.nc
+
+# Parameters related to surface and thermal physical properties
+#************************************************************************
+# Read bare soil albedo from file with background MODIS data
+ALB_BG_MODIS = y
+ALB_BG_FILE  = alb_bg.nc
+
+# ROUGH_DYN : Account for a dynamic roughness height (activation of Su et al. parametrization)
+ROUGH_DYN=y
+
+# OK_FREEZE :  Activate the complet soil freezing scheme
+OK_FREEZE=n
+
+# DEPTH_MAX_T (m) :  Maximum depth of the soil thermodynamics
+DEPTH_MAX_T=90
+
+# OK_EXPLICITSNOW :  Activate explict snow scheme
+OK_EXPLICITSNOW=y
+ 
+# READ_REFTEMP :  Initialize soil temperature using climatological temperature
+READ_REFTEMP=n
+
+# Parameters related to chemistry bvoc 
+#************************************************************************
+# CHEMISTRY_OK_BVOC :  Activate chemistry
+CHEMISTRY_BVOC =  n
+
+# CO2 FOR BVOC - WILKINSON :  CO2 inhibition effect for isoprene based on Wilkinson approach?
+CO2_FOR_BVOC_WILKINSON=n
+
+# CO2 FOR BVOC - POSSELL :  CO2 inhibition effect for isoprene based on Possell approach?
+CO2_FOR_BVOC_POSSELL=n
+
Index: CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/orchidee.def_Choi
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/orchidee.def_Choi	(revision 3559)
+++ CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/orchidee.def_Choi	(revision 3559)
@@ -0,0 +1,99 @@
+#
+#**************************************************************************
+#                    Parameter file list for ORCHIDEE
+#**************************************************************************
+
+# Input and output
+#**************************************************************************
+# Restart the time from the GCM. 
+# default = n
+SECHIBA_reset_time = y
+
+# Name of restart to read for initial conditions
+# default = NONE
+SECHIBA_restart_in = _AUTOBLOCKER_
+
+# Name of restart to read for initial conditions of STOMATE
+# default = NONE
+STOMATE_RESTART_FILEIN = _AUTOBLOCKER_
+
+# Use XIOS for writing diagnostics file
+# defulat = n
+XIOS_ORCHIDEE_OK = y
+
+# Writefrequency in seconds in sechiba_history.nc
+# default = 86400.0
+WRITE_STEP = 0
+
+# Hydrology parameters
+#**************************************************************************
+# Activate the multi-layer diffusion scheme adapted from CWRR
+# by default the Choisnel hydrology is used.
+# default = n
+HYDROL_CWRR = n 
+
+# Total depth of soil reservoir
+# default = 2./4. depending on HYDROL_CWRR
+HYDROL_SOIL_DEPTH = 4.
+
+# Root profile
+HYDROL_HUMCSTE = 5., .4, .4, 1., .8, .8, 1., 1., .8, 4., 1., 4., 1.
+
+# Activate river routing
+# default = n
+RIVER_ROUTING = y
+
+#**************************************************************************
+# Activate Stomate component
+# default = n
+STOMATE_OK_STOMATE = _AUTOBLOCKER_ 
+
+# Activate calculations of CO2 according to Farqhuar and Ball
+# default = n
+STOMATE_OK_CO2 = y
+
+# Use cdrag coefficient from gcm
+CDRAG_FROM_GCM = y
+
+# Interception reservoir coefficient.
+# default = 0.1
+SECHIBA_QSINT = 0.02
+
+# Parmeters related to vegetation map
+#**************************************************************************
+# Year of the land_use vegetation map readed
+# year off the pft map
+# default = 282
+VEGET_YEAR = 1
+
+# The parameter is used to bypass veget_year count 
+# and reinitialize it with VEGET_YEAR parameter.
+# Then it is possible to change LAND USE file.
+# If LAND_USE
+# default = y
+VEGET_REINIT = n
+
+# Update vegetation frequency (since 2.0 version)
+# The veget datas will be update at this period if LAND_USE
+# default = 1Y
+VEGET_UPDATE = _AUTO_
+
+# Do not use default fire module
+FIRE_DISABLE = y
+
+# Create river description file
+RIVER_DESC = _AUTO_
+RIVER_DESC_FILE =  river_desc.nc
+
+# Parameter related to chemistry bvoc 
+#************************************************************************
+# CHEMISTRY_OK_BVOC ([FLAG]) :  Activate chemistry    {OK_SECHIBA}
+# default =  n 
+CHEMISTRY_BVOC =  n
+
+# CO2 FOR BVOC - WILKINSON ([FLAG]) :  CO2 inhibition effect for isoprene based on Wilkinson approach?    {CHEMISTRY_OK_BVOC }
+CO2_FOR_BVOC_WILKINSON=n
+
+# CO2 FOR BVOC - POSSELL ([FLAG]) :  CO2 inhibition effect for isoprene based on Possell approach?    {CHEMISTRY_OK_BVOC }
+CO2_FOR_BVOC_POSSELL=n
+
Index: CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/physiq.def_AP
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/physiq.def_AP	(revision 3559)
+++ CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/physiq.def_AP	(revision 3559)
@@ -0,0 +1,95 @@
+## $Id$
+#
+##  Choix ou non  de  New oliq               
+new_oliq=y
+##  Orodr  ou  non   pour l orographie              
+ok_orodr=y
+##  Orolf  ou  non   pour l orographie              
+ok_orolf=y
+##   Si = .T. ,  lecture du fichier limit avec la bonne annee             
+ok_limitvrai=n
+##  Flag  pour la convection : 1 pour LMD, 2 pour Tiedtke, 3 KE(nvlle version JYG), 30 KE(version IPCC AR4), 4 KE vect
+iflag_con=30
+## Facteur multiplication des precip convectives dans KE
+cvl_corr=1.0
+#
+#
+
+### niveau du diagnostique de conservation d energie
+if_ebil=0
+#
+# parametres KE
+#
+### epmax = Efficacite precipitation maximale
+epmax = .999
+### ok_adj_ema = ?? pas utilise
+ok_adj_ema = n
+### iflag_clw Flag calcul eau liquide
+# - iflag_clw=0 : qcond_incld(i,l) = em_qcondc(l)
+# - iflag_clw=1 : qcond_incld(i,l) = em_qcond(l)
+# - iflag_clw=2 : eau liquide diagnostique en fonction de la Precip
+iflag_clw = 1
+# 
+# parametres nuages
+#
+### cld_lc_lsc  contenu en eau liquide des nuages large-scale (fisrtilp) 
+cld_lc_lsc = 4.16e-4
+### cld_lc_con  contenu en eau liquide des nuages convectifs (fisrtilp) 
+cld_lc_con = 4.16e-4
+### cld_tau_lsc cte de temps utilisee pour eliminer l eau large-scale (fisrtilp) 
+cld_tau_lsc = 1800.
+### cld_tau_con cte de temps utilisee pour eliminer l eau convective (fisrtilp) 
+cld_tau_con = 1800.
+### ffallv_lsc  cte utilisee dans calcul vitesse de chute cristaux de glace large-scale (fisrtilp) 
+ffallv_lsc = 0.5
+### ffallv_lsc  cte utilisee dans calcul vitesse de chute cristaux de glace convectifs (fisrtilp) 
+ffallv_con = 0.5
+### coef_eva coef evaporation precips eau/glace (fisrtilp/fisrtilp_tr?/conlmd?)
+coef_eva = 2.e-5
+### reevap_ice  reevaporation de toute la precip dans la couche du dessous pour la glace (fisrtilp) 
+reevap_ice = y
+### iflag_cldcon  flag pour calculer ratqsc=F(ratqsbas,fact_cldcon,q_seri) (physiq) 
+# - iflag_cldcon<=-1 diag. rain_Tiedtke 
+# - iflag_cldcon=1, ratqsc=ratqsbas+fact_cldcon*(q_seri(1)-q_seri(k))/q_seri(k)
+# - iflag_cldcon=1/2, ratqs=max(ratqs,ratqsc)
+# - iflag_cldcon=3,   ratqs=ratqss
+iflag_cldcon = 3
+### iflag_pdf :  flag calcul distribution sous-maille de l eau et des nuages 
+# - iflag_pdf=0, version ratqs, 
+# - iflag_pdf=1, calcul eau condensee, fraction nuageuse, eau nuageuse a partir
+# -              des PDFS de Sandrine Bony 
+iflag_pdf = 1
+### fact_cldcon  constante calcul ratqsc (voir iflag_cldcon) et proprietes nuages convectifs, clwcon0 (physiq.F) 
+fact_cldcon = 1.
+### facttemps=   facteur de relaxation de ratqs (iflag_cldcon=1/2) et rnebcon (iflag_cldcon=3)
+facttemps = 0.
+## ok_newmicro   =y appel newmicro , =n appel nuage (calcul epaisseur optique et emmissivite des nuages) 
+ok_newmicro = y
+### iflag_ratqs=0 correspond a la version IPCC AR4 
+iflag_ratqs=0
+### ratqsbas     ratqs en bas si iflag_cldcon=1 
+ratqsbas = 0.005
+### ratqshaut    ratqs en haut pour ratqss "stables"  
+ratqshaut = 0.33
+### rad_froid    rayon cristaux des nuages de glace "froids" 
+rad_froid = 35
+### rad_chau1    rayon goutelettes d eau chauds", en haut: k=4-klev 
+rad_chau1=12
+### rad_chau2    rayon goutelettes d eau chauds", en bas: k=1-3  
+rad_chau2=11
+# 
+# Coefficient et parametres sur les drags
+#
+f_cdrag_ter=1.
+f_cdrag_stable=1.
+f_cdrag_oce=0.8
+f_rugoro=0.
+### ksta_ter      coef.diffusion minimale sur terre/sic/lic 
+ksta_ter=1.e-7
+### cdmmax =     cdrag maximum pour le moment
+cdmmax = 2.5E-3
+### cdhmax =     cdrag maximum pour l energie
+cdhmax = 2.0E-3
+
+### nsplit_phys (D=1) 
+nsplit_phys=1
Index: CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/physiq.def_NPv3.2
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/physiq.def_NPv3.2	(revision 3559)
+++ CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/physiq.def_NPv3.2	(revision 3559)
@@ -0,0 +1,131 @@
+##############################################################################
+# PARAMETRES ET CLES DE CONFIGURATION LMDZ 
+# Cette parie sera bientot extrait dans un fichier config.def
+##############################################################################
+# D: Valeur par default
+#
+##############################################################################
+# PARAMETRES ET CLES DE LA PHYSIQUE LMDZ
+##############################################################################
+# D: Valeur par default
+#
+#Parametres Orographiques et cdrags
+#**********************************
+##   Si=.T. ,  lecture du fichier limit avec la bonne annee 
+ok_limitvrai=n
+#Cdrags 
+f_cdrag_stable=1.
+f_cdrag_ter=1.
+f_cdrag_oce=0.7
+#cdmmax
+cdmmax=2.5E-3
+#cdhmax
+cdhmax=2.0E-3
+##  Orodr  ou  non   pour l orographie
+ok_orodr=y
+##  Orolf  ou  non   pour l orographie              
+ok_orolf=y
+#Rugoro
+f_rugoro=0.
+#
+# Rayonnement
+#*********************
+# activation du nouveau code de rayonnement RRTM
+# 0 : Ancien code et 1 : RRTM (D=0)
+iflag_rrtm=0
+## NSW need to be 6 when iflag_rrtm=1
+NSW=2   
+#
+#
+# Parametres nuages
+#******************
+#seuils de la precipitation des nuages strateformes (D: 2.6e-4 2.6e-4)
+cld_lc_lsc=6.e-4
+cld_lc_con=6.e-4
+#constante de temps pour eleminer eau lsc et convective (D: 3600. 3600.)
+cld_tau_lsc=1800.
+cld_tau_con=1800.
+#facteurs correctifs sur la vitesse de chute des cristaux de glace (D: 1 1)
+ffallv_lsc=1.35
+ffallv_con=1.35
+#coefficient sur la reevaporation de la pluie (D: 2.e-5 n)
+coef_eva=1e-4
+reevap_ice=y
+#calcul des proprietes des nuages convectifs (D:1 0.375 1.e-4) 
+iflag_cldcon=6
+fact_cldcon=1.
+facttemps=0.
+#calcul eau condensee et fraction nuageuse a partir des PDF (D:0, 0:version avec ratqs sinon nouvelles PDFs)  
+iflag_pdf=1
+#calcul epaisseur optique et emmissivite des nuages (D: y 1 0.01 0.3)
+ok_newmicro=y
+iflag_ratqs=2
+ratqsbas=0.002
+ratqshaut=0.25
+#rayon effectif pour les nuages de glace (D:35)
+rad_froid=35
+#rayons effectifs pour les nuages eau liq (tailles des gouttes d eau nuageuse, D: 13 9)
+rad_chau1=12
+rad_chau2=11
+##  Choix ou non  de  New oliq               
+new_oliq=y
+#
+rei_min=20.
+rei_max=61.29
+#
+t_glace_min=258.
+t_glace_max=273.13
+#
+# Flags Convection 
+#*****************
+#flag  pour la convection (D:2, 1:LMD, 2:Tiedtke, 3:KE nouvelle physique, 30:KE IPCC)
+iflag_con=3
+#niveau de sorties des diagnos sur la conservation energie
+if_ebil=0
+#efficacite de precepitation maxim (D:.993)
+epmax=0.997
+#ajustement convectif sec au debut de la convection (D: n 0)
+ok_adj_ema=n
+iflag_clw=0
+#fermeture convective (D:1, 0:AR4, 2:ALE and ALP)
+iflag_clos=2
+#loi de melange a l entrainement  (D:1, 0:AR4=PDF plate, 1=PDF)
+iflag_mix=1
+#poids des PDFs plate et en cloche (D: 1 0)
+qqa1=1.
+qqa2=0.
+# Facteur multiplication des precip convectives dans KE
+cvl_corr=1.0
+#
+Fmax=0.65
+#
+# Flags Couche limite
+#********************
+#shema de CL des thermiques (D:0, 0:ajustement sec,=>1:versions thermiques) 
+iflag_thermals=17
+#pas de temps du spliting pour les thermiques
+nsplit_thermals=1
+tau_thermals=0.
+iflag_thermals_ed=10
+iflag_thermals_optflux=0
+#shema de la couche de surface (D:1, 1:LMD, 8:Mellor-Yamada) 
+iflag_pbl=11
+#diffusion turbulente
+ksta_ter=1.e-7
+ksta=1.e-10
+#ok_kzmin : calcul Kzmin dans la CL de surface
+ok_kzmin=y
+#couplage ou non avec la convection
+iflag_coupl=5 (0:AR4 et 1:nouvelle physique)
+seuil_inversion=-0.08
+#rendement sur la puissance fournie par les thermiques a la convection
+alp_bl_k=0.5
+#
+# Flags wakes
+#************
+#activation ou non des wakes (D:0, 0:AR4, 1:nouvelle physique) 
+iflag_wake=1
+alp_offset=0.
+
+nsplit_phys=1
+
Index: CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/physiq.def_NPv5.4
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/physiq.def_NPv5.4	(revision 3559)
+++ CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/physiq.def_NPv5.4	(revision 3559)
@@ -0,0 +1,229 @@
+#
+# $Id: physiq.def_NPv5.4 2511 2016-05-12 13:34:32Z fairhead $
+#
+#PARAMETRES ET CLES DE LA PHYSIQUE LMDZ
+###############################################################################
+## D: Valeur par default
+##
+##Parametres Orographiques et cdrags
+##**********************************
+###   Si=.T. ,  lecture du fichier limit avec la bonne annee 
+ok_limitvrai=n
+iflag_albedo=1
+#Cdrags 
+f_cdrag_stable=1.
+f_cdrag_ter=1.
+f_cdrag_oce=0.7
+f_ri_cd_min=0.6
+#cdmmax
+cdmmax=2.5E-3
+#cdhmax
+cdhmax=2.0E-3
+##  Orodr  ou  non   pour l orographie
+ok_orodr=y
+##  Orolf  ou  non   pour l orographie              
+ok_orolf=y
+#Rugoro
+f_rugoro=0.
+#
+### Random gravity waves
+#Activitate the stochastic parameterization of convective GWs (should be equal to ok_strato)
+ok_gwd_rando=y
+# Scale the momentum fluxes due to convective GWs
+gwd_rando_ruwmax=2.5
+#Scale the saturated momentum flux of  convective GWs 
+gwd_rando_sat=0.2
+sso_gkdrag=0.2
+sso_gfrcri=0.70
+sso_gkwake=0.40
+#
+# Rayonnement
+#*********************
+# activation du nouveau code de rayonnement RRTM
+# 0 : Ancien code et 1 : RRTM (D=0)
+iflag_rrtm=0
+#NSW=2
+#
+# Parametres nuages
+#******************
+#seuils de la precipitation des nuages strateformes (D: 2.6e-4 2.6e-4)
+cld_lc_lsc=0.0001
+cld_lc_con=0.0001
+#constante de temps pour eleminer eau lsc et convective (D: 3600. 3600.)
+cld_tau_lsc=900.
+cld_tau_con=900.
+#facteurs correctifs sur la vitesse de chute des cristaux de glace (D: 1 1)
+ffallv_lsc=1.
+ffallv_con=1.
+#coefficient sur la reevaporation de la pluie (D: 2.e-5 n)
+coef_eva=2e-5
+reevap_ice=y
+#calcul des proprietes des nuages convectifs (D:1 0.375 1.e-4) 
+iflag_cldcon=6
+fact_cldcon=1.
+facttemps=0.
+#calcul eau condensee et fraction nuageuse a partir des PDF (D:0, 0:version avec ratqs sinon nouvelles PDFs)  
+iflag_pdf=1
+#calcul epaisseur optique et emmissivite des nuages (D: y 1 0.01 0.3)
+ok_newmicro=y
+iflag_ratqs=4
+ratqsbas=0.002
+ratqshaut=0.312
+#rayon effectif pour les nuages de glace (D:35)
+rad_froid=35
+#rayons effectifs pour les nuages eau liq (tailles des gouttes d eau nuageuse, D: 13 9)
+rad_chau1=12
+rad_chau2=11
+##  Choix ou non  de  New oliq               
+new_oliq=y
+#Rayons min et max effectifs des particules des nuages
+rei_min=16.
+rei_max=61.29
+#
+# Flags Convection 
+#*****************
+#Convection scheme switch (D:2, 1:LMD, 2:Tiedtke, 3:KE New Physics, 30:KE AR4)
+iflag_con=3
+#output level of energy conservation diagnostics
+if_ebil=0
+#maximum efficiency of cld water->precipitation conversion (D: 0.993)
+epmax=0.9995
+#dry convective adjustment at beginning of Emanuel convective scheme (D: n 0)
+ok_adj_ema=n
+iflag_clw=0
+#Convective closure (D:1, 0:AR4, 2:ALE and ALP)
+iflag_clos=2
+#Convective entrainment mixing law (D:1, 0:AR4=flat PDF, 1=PDF)
+iflag_mix=1
+#weights of the bell shaped and flat PDF (used only if iflag_mix=1) (D: 1 0)
+qqa1=1.
+qqa2=0.
+#Parameters of the bell shaped PDF; Fmax=center (D= 0.65), Gammas=width (D=0.05)
+cvl_corr=1.0
+#Multiplicative factor of Emanuel convective scheme precipitation (D: 1.)
+Fmax=0.65
+#
+# Flags Couche limite
+#********************
+#shema de CL des thermiques (D:0, 0:ajustement sec,=>1:versions thermiques) 
+iflag_thermals=18
+#pas de temps du spliting pour les thermiques
+nsplit_thermals=1
+tau_thermals=0.
+iflag_thermals_ed=8
+fact_thermals_ed_dz=0.1
+iflag_thermals_optflux=0
+#shema de la couche de surface (D:1, 1:LMD, 8:Mellor-Yamada) 
+iflag_pbl=11
+#diffusion turbulente
+ksta_ter=1.e-7
+ksta=1.e-10
+#ok_kzmin : calcul Kzmin dans la CL de surface
+ok_kzmin=y
+#couplage ou non avec la convection
+iflag_coupl=5 (0:AR4 et 1:nouvelle physique)
+seuil_inversion=-0.08
+#rendement sur la puissance fournie par les thermiques a la convection
+alp_bl_k=0.5
+#
+## temperature dependency of qsat for iterative procedure
+## temporary flag to switch between the old (CMIP5, D=0) and new versions (=1) versions 
+iflag_fisrtilp_qsat=4 
+## Reactivation du calcul d'un zmax continu pour les thermiques
+## reactivation d'une fermeture humide des thermiques  iflag_thermals_closure=2 (D=1)
+iflag_thermals_closure=1
+#
+# Flags wakes
+#************
+#Wake scheme switch (D:0, 0:AR4, 1:New Physics)
+iflag_wake=1
+#Constant value to be added to Alp (D: 0.)
+alp_offset=0.
+
+### nrlmd le 10/04/2012: Declenchement ###
+#DÃ©clelenchement par couche-limite (0: deterministe, 1: stochastique)
+iflag_trig_bl=1
+#Surface critique au LCL
+s_trig=1.2e7
+#Temps de decorrelation entre scenes de cumulus
+tau_trig_shallow=1200
+#Temps de decorrelation entre scenes de cumulonimbus
+tau_trig_deep=1200
+# Pour la stabilisation
+random_notrig_max=0.99
+ok_adjwk=y
+tmax_fonte_cv=288.15
+
+
+### nrlmd le 10/04/2012: Fermeture ###
+#Fermeture par couche-limite (0: deterministe, 1: statistique, 2: statistique+convergence grande Ã©chelle)
+iflag_clos_bl=1
+### fin nrlmd le 10/04/2012
+
+## Modification de la plage de temperature pour la phase mixte liquide/glace des nuages
+## Controle par les t_glace_min/max, exposant_glace, iflag_t_glace (D=0)
+t_glace_min=233.13
+t_glace_max=273.13
+exposant_glace=1.
+iflag_t_glace=1
+iflag_ice_thermo=1
+
+#
+## The source terms of the TKE prognostic equation are diagnosed from tendencies (du, dv, dT) 
+## associated with subrgrid scaleamotions and treated as an additional heat source.
+## Controled by a key, iflag_ener_conserv (D=-1):
+## 0 : no conservation, -1 : old adhoc correction for kinetic E only (used for CMIP5) 
+## 1 : conservation, 101 : conversion from kinetic to heat only, 110 conversion from potential to heat only
+iflag_ener_conserv=1
+
+#Activation of corrections for water conservation (D: n). 
+##The default is n for compatibility with earlier versions.
+##generally it should be y.
+ok_conserv_q=y 
+
+### distribution sous-maille sur la verticale 
+iflag_cloudth_vert=1
+
+### Convection: le fichier convection.def
+#altitude, in hPa, above LCL at which buoybase is computed, def = original: -40
+dpbase=-40.
+#altitude, in hPa, above LCL below which Ep=0, def = original: 150, used only if flag_epKEorig=0
+pbcrit=150.0
+#altitude, in hPa, above LCL above which Ep=Epmax, def = original: 500, used only if flag_epKEorig=0
+ptcrit=500.0
+#reference fractional area of precipitating downdraughts, def = original: 0.01
+sigdz=0.01
+#unsaturated fraction of precipitating downdraughts, def = original: 0.15
+spfac=0.15
+#relaxation time of cloud base mass flux, def = original: 8000
+tau=8000.
+#flag for wb (= vert velocity at LFC); 0->wb=wbmax, 1->wb=f(plfc) bounded, 2->wb=f(plfc) linear, def = 1
+flag_wb=1
+#parameter used in the computation of wb, def = 6.
+wbmax=6.
+#
+ok_convstop=.False.
+#
+tau_stop=15000.
+#
+ok_intermittent=.False.
+#shedding coefficient (used when iflag_mix_adiab=1)
+coef_peel=0.25
+#
+### Clouds
+#Conversion cld water->precip: Ep=f(pressure) if 0; Ep=f(temperature) if 1, def=1
+flag_epKEorig=1
+#max condensed water concentration in kg/kg, def=0.0003, original: 0.0011, used only if flag_epKEorig=1
+elcrit=0.0003
+#temperature in degre Celsius, at which Ep=Epmax, def=-55., original: -55, used only if flag_epKEorig=1
+tlcrit=-55.0
+
+### Wakes
+#coefficient in Wape->C_star formula: C_star=stark*sqrt(2*Wape), def: 0.33
+stark=0.33
+#lifting efficiency of wakes; Alp=Alpk*Fip, Fip=power provided by wakes, def: 0.25
+alpk=0.25
+#wake density = number of wake centers per m2, def: 8.E-12
+wdens_ref=8.E-12
+#multiplicative factor of the damping by gravity waves, def: 4.
+coefgw=4.
Index: CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/physiq.def_NPv5.70
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/physiq.def_NPv5.70	(revision 3559)
+++ CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/physiq.def_NPv5.70	(revision 3559)
@@ -0,0 +1,247 @@
+#
+# $Id: physiq.def_NPv5.70 3034 2016-12-01 15:55:31Z jgipsl $
+#
+##############################################################################
+# PARAMETRES ET CLES DE LA PHYSIQUE LMDZ
+##############################################################################
+# D: Valeur par default
+#
+#Parametres Orographiques et cdrags
+#**********************************
+##   Si=.T. ,  lecture du fichier limit avec la bonne annee 
+ok_limitvrai=n
+iflag_albedo=1
+#Cdrags 
+f_cdrag_stable=1.
+f_cdrag_ter=1.
+f_cdrag_oce=0.6
+f_ri_cd_min=0.1
+#cdmmax
+cdmmax=2.5E-3
+#cdhmax
+cdhmax=2.0E-3
+##  Orodr  ou  non   pour l orographie
+ok_orodr=y
+##  Orolf  ou  non   pour l orographie              
+ok_orolf=y
+#Rugoro
+f_rugoro=0.
+#
+### Random gravity waves
+#Activitate the stochastic parameterization of convective GWs (should be equal to ok_strato)
+ok_gwd_rando=y
+# Scale the momentum fluxes due to convective GWs
+gwd_rando_ruwmax=2.5
+#Scale the saturated momentum flux of  convective GWs 
+gwd_rando_sat=0.2
+
+sso_gkdrag=0.2
+sso_gfrcri=0.70
+sso_gkwake=0.40
+#
+# Rayonnement
+#*********************
+# activation du nouveau code de rayonnement RRTM
+# 0 : Ancien code et 1 : RRTM (D=0)
+iflag_rrtm=1
+NSW=6
+#
+# Parametres nuages
+#******************
+#seuils de la precipitation des nuages strateformes (D: 2.6e-4 2.6e-4)
+cld_lc_lsc=0.0002
+cld_lc_con=0.0002
+#constante de temps pour eleminer eau lsc et convective (D: 3600. 3600.)
+cld_tau_lsc=900.
+cld_tau_con=900.
+#facteurs correctifs sur la vitesse de chute des cristaux de glace (D: 1 1)
+ffallv_lsc=0.5
+ffallv_con=0.5
+#coefficient sur la reevaporation de la pluie (D: 2.e-5 n)
+coef_eva=2e-4
+reevap_ice=y
+#calcul des proprietes des nuages convectifs (D:1 0.375 1.e-4) 
+iflag_cldcon=6
+fact_cldcon=1.
+facttemps=0.
+#calcul eau condensee et fraction nuageuse a partir des PDF (D:0, 0:version avec ratqs sinon nouvelles PDFs)  
+iflag_pdf=1
+#calcul epaisseur optique et emmissivite des nuages (D: y 1 0.01 0.3)
+ok_newmicro=y
+iflag_ratqs=4
+ratqsp0=37500.
+ratqsdp=20000.
+ratqsbas=0.002
+ratqshaut=0.4
+#rayon effectif pour les nuages de glace (D:35)
+rad_froid=35
+#rayons effectifs pour les nuages eau liq (tailles des gouttes d eau nuageuse, D: 13 9)
+rad_chau1=12
+rad_chau2=11
+##  Choix ou non  de  New oliq               
+new_oliq=y
+#Rayons min et max effectifs des particules des nuages
+rei_min=16.
+rei_max=61.29
+#
+# Flags Convection 
+#*****************
+#Convection scheme switch (D:2, 1:LMD, 2:Tiedtke, 3:KE New Physics, 30:KE AR4)
+iflag_con=3
+#output level of energy conservation diagnostics
+if_ebil=0
+#maximum efficiency of cld water->precipitation conversion (D: 0.993)
+epmax=0.999
+#dry convective adjustment at beginning of Emanuel convective scheme (D: n 0)
+ok_adj_ema=n
+iflag_clw=0
+#Convective closure (D:1, 0:AR4, 2:ALE and ALP)
+iflag_clos=2
+#Convective entrainment mixing law (D:1, 0:AR4=flat PDF, 1=PDF)
+iflag_mix=1
+#weights of the bell shaped and flat PDF (used only if iflag_mix=1) (D: 1 0)
+qqa1=1.
+qqa2=0.
+#Parameters of the bell shaped PDF; Fmax=center (D= 0.65), Gammas=width (D=0.05)
+cvl_corr=1.0
+#Multiplicative factor of Emanuel convective scheme precipitation (D: 1.)
+Fmax=0.65
+#
+# Flags Couche limite
+#********************
+#shema de CL des thermiques (D:0, 0:ajustement sec,=>1:versions thermiques) 
+iflag_thermals=18
+#pas de temps du spliting pour les thermiques
+nsplit_thermals=1
+tau_thermals=0.
+iflag_thermals_ed=8
+fact_thermals_ed_dz=0.1
+iflag_thermals_optflux=0
+#shema de la couche de surface (D:1, 1:LMD, 8:Mellor-Yamada) 
+iflag_pbl=11
+#diffusion turbulente
+ksta_ter=1.e-7
+ksta=1.e-10
+#ok_kzmin : calcul Kzmin dans la CL de surface
+ok_kzmin=y
+#couplage ou non avec la convection
+iflag_coupl=5 (0:AR4 et 1:nouvelle physique)
+seuil_inversion=-0.08
+#rendement sur la puissance fournie par les thermiques a la convection
+alp_bl_k=0.5
+#
+## temperature dependency of qsat for iterative procedure
+## temporary flag to switch between the old (CMIP5, D=0) and new versions (=1) versions 
+iflag_fisrtilp_qsat=4 
+## Reactivation du calcul d'un zmax continu pour les thermiques
+## reactivation d'une fermeture humide des thermiques  iflag_thermals_closure=2 (D=1)
+iflag_thermals_closure=1
+#
+# Flags wakes
+#************
+#Wake scheme switch (D:0, 0:AR4, 1:New Physics)
+iflag_wake=1
+#Constant value to be added to Alp (D: 0.)
+alp_offset=0.
+
+### nrlmd le 10/04/2012: Declenchement ###
+#Declenchement par couche-limite (0: deterministe, 1: stochastique)
+iflag_trig_bl=1
+#Surface critique au LCL
+s_trig=1.2e7
+#Temps de decorrelation entre scenes de cumulus
+tau_trig_shallow=1200
+#Temps de decorrelation entre scenes de cumulonimbus
+tau_trig_deep=1200
+# Pour la stabilisation
+random_notrig_max=0.99
+ok_adjwk=y
+tmax_fonte_cv=278.15
+
+
+### nrlmd le 10/04/2012: Fermeture ###
+#Fermeture par couche-limite (0: deterministe, 1: statistique, 2: statistique+convergence grande echelle)
+iflag_clos_bl=1
+### fin nrlmd le 10/04/2012
+
+## Modification de la plage de temperature pour la phase mixte liquide/glace des nuages
+## Controle par les t_glace_min/max, exposant_glace, iflag_t_glace (D=0)
+t_glace_min=233.13
+t_glace_max=273.13
+exposant_glace=1.
+iflag_t_glace=2
+iflag_ice_thermo=1
+
+#
+## The source terms of the TKE prognostic equation are diagnosed from tendencies (du, dv, dT) 
+## associated with subrgrid scaleamotions and treated as an additional heat source.
+## Controled by a key, iflag_ener_conserv (D=-1):
+## 0 : no conservation, -1 : old adhoc correction for kinetic E only (used for CMIP5) 
+## 1 : conservation, 101 : conversion from kinetic to heat only, 110 conversion from potential to heat only
+iflag_ener_conserv=1
+
+#Activation of corrections for water conservation (D: n). 
+##The default is n for compatibility with earlier versions.
+##generally it should be y.
+ok_conserv_q=y 
+
+iflag_cloudth_vert=2
+
+#
+lmixmin=10.
+#pbl_lmixmin_alpha=0.05
+
+#Bergeron
+iflag_bergeron=1
+
+
+### Convection
+#altitude, in hPa, above LCL at which buoybase is computed, def = original: -40
+dpbase=-40.
+#altitude, in hPa, above LCL below which Ep=0, def = original: 150, used only if flag_epKEorig=0
+pbcrit=150.0
+#altitude, in hPa, above LCL above which Ep=Epmax, def = original: 500, used only if flag_epKEorig=0
+ptcrit=500.0
+#reference fractional area of precipitating downdraughts, def = original: 0.01
+sigdz=0.01
+#unsaturated fraction of precipitating downdraughts, def = original: 0.15
+spfac=0.15
+#relaxation time of cloud base mass flux, def = original: 8000
+tau=8000.
+#flag for wb (= vert velocity at LFC); 0->wb=wbmax, 1->wb=f(plfc) bounded, 2->wb=f(plfc) linear, def = 1
+flag_wb=1
+#parameter used in the computation of wb, def = 6.
+wbmax=6.
+#
+ok_convstop=.False.
+#
+tau_stop=15000.
+#
+ok_intermittent=.False.
+#shedding coefficient (used when iflag_mix_adiab=1)
+coef_peel=0.25
+#
+### Clouds
+#Conversion cld water->precip: Ep=f(pressure) if 0; Ep=f(temperature) if 1, def=1
+flag_epKEorig=1
+#max condensed water concentration in kg/kg, def=0.0003, original: 0.0011, used only if flag_epKEorig=1
+elcrit=0.00025
+#temperature in degre Celsius, at which Ep=Epmax, def=-55., original: -55, used only if flag_epKEorig=1
+tlcrit=-40.
+
+### Wakes
+#coefficient in Wape->C_star formula: C_star=stark*sqrt(2*Wape), def: 0.33
+stark=0.33
+#lifting efficiency of wakes; Alp=Alpk*Fip, Fip=power provided by wakes, def: 0.25
+alpk=0.25
+#wake density = number of wake centers per m2, def: 8.E-12
+wdens_ref=8.E-12
+#multiplicative factor of the damping by gravity waves, def: 4.
+coefgw=4.
+#
+### Les parametres suivants viennent du config.def
+# constante solaire lue dans un fichier par defaut
+ok_suntime_rrtm=y
+# Aerosols stratospheriques utilises par defaut
+flag_aerosol_strat=2
+
Index: CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/physiq.def_NPv5.80b
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/physiq.def_NPv5.80b	(revision 3559)
+++ CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/physiq.def_NPv5.80b	(revision 3559)
@@ -0,0 +1,249 @@
+#
+# $Id: physiq.def_NPv5.80a 2925 2016-07-22 13:33:42Z lfairhead $
+#
+##############################################################################
+# PARAMETRES ET CLES DE LA PHYSIQUE LMDZ
+##############################################################################
+# D: Valeur par default
+#
+#Parametres Orographiques et cdrags
+#**********************************
+##   Si=.T. ,  lecture du fichier limit avec la bonne annee 
+ok_limitvrai=n
+iflag_albedo=1
+#Cdrags 
+f_cdrag_stable=1.
+f_cdrag_ter=1.
+f_cdrag_oce=0.6
+f_ri_cd_min=0.1
+#cdmmax
+cdmmax=2.5E-3
+#cdhmax
+cdhmax=2.0E-3
+##  Orodr  ou  non   pour l orographie
+ok_orodr=y
+##  Orolf  ou  non   pour l orographie              
+ok_orolf=y
+#Rugoro
+f_rugoro=0.
+#
+### Random gravity waves
+#Activitate the stochastic parameterization of convective GWs (should be equal to ok_strato)
+ok_gwd_rando=y
+# Scale the momentum fluxes due to convective GWs
+gwd_rando_ruwmax=2.5
+#Scale the saturated momentum flux of  convective GWs 
+gwd_rando_sat=0.2
+
+sso_gkdrag=0.2
+sso_gfrcri=0.70
+sso_gkwake=0.40
+#
+# Rayonnement
+#*********************
+# activation du nouveau code de rayonnement RRTM
+# 0 : Ancien code et 1 : RRTM (D=0)
+iflag_rrtm=1
+NSW=6
+#
+# Parametres nuages
+#******************
+#seuils de la precipitation des nuages strateformes (D: 2.6e-4 2.6e-4)
+cld_lc_lsc=0.0002
+cld_lc_con=0.0002
+#constante de temps pour eleminer eau lsc et convective (D: 3600. 3600.)
+cld_tau_lsc=900.
+cld_tau_con=900.
+#facteurs correctifs sur la vitesse de chute des cristaux de glace (D: 1 1)
+ffallv_lsc=0.5
+ffallv_con=0.5
+#coefficient sur la reevaporation de la pluie (D: 2.e-5 n)
+coef_eva=2e-4
+reevap_ice=y
+#calcul des proprietes des nuages convectifs (D:1 0.375 1.e-4) 
+iflag_cldcon=6
+fact_cldcon=1.
+facttemps=0.
+#calcul eau condensee et fraction nuageuse a partir des PDF (D:0, 0:version avec ratqs sinon nouvelles PDFs)  
+iflag_pdf=1
+#calcul epaisseur optique et emmissivite des nuages (D: y 1 0.01 0.3)
+ok_newmicro=y
+iflag_ratqs=4
+ratqsp0=43700.
+ratqsdp=20000.
+ratqsbas=0.002
+ratqshaut=0.4
+#rayon effectif pour les nuages de glace (D:35)
+rad_froid=35
+#rayons effectifs pour les nuages eau liq (tailles des gouttes d eau nuageuse, D: 13 9)
+rad_chau1=12
+rad_chau2=11
+##  Choix ou non  de  New oliq               
+new_oliq=y
+# Seuils oliqmax, oicemax
+oliqmax=1.5E-3
+oicemax=1.5E-3
+#Rayons min et max effectifs des particules des nuages
+rei_min=16.
+rei_max=61.29
+#
+# Flags Convection 
+#*****************
+#Convection scheme switch (D:2, 1:LMD, 2:Tiedtke, 3:KE New Physics, 30:KE AR4)
+iflag_con=3
+#output level of energy conservation diagnostics
+if_ebil=0
+#maximum efficiency of cld water->precipitation conversion (D: 0.993)
+epmax=0.999
+#dry convective adjustment at beginning of Emanuel convective scheme (D: n 0)
+ok_adj_ema=n
+iflag_clw=0
+#Convective closure (D:1, 0:AR4, 2:ALE and ALP)
+iflag_clos=2
+#Convective entrainment mixing law (D:1, 0:AR4=flat PDF, 1=PDF)
+iflag_mix=1
+#weights of the bell shaped and flat PDF (used only if iflag_mix=1) (D: 1 0)
+qqa1=1.
+qqa2=0.
+#Parameters of the bell shaped PDF; Fmax=center (D= 0.65), Gammas=width (D=0.05)
+cvl_corr=1.0
+#Multiplicative factor of Emanuel convective scheme precipitation (D: 1.)
+Fmax=0.65
+#
+# Flags Couche limite
+#********************
+#shema de CL des thermiques (D:0, 0:ajustement sec,=>1:versions thermiques) 
+iflag_thermals=18
+#pas de temps du spliting pour les thermiques
+nsplit_thermals=1
+tau_thermals=0.
+iflag_thermals_ed=8
+fact_thermals_ed_dz=0.1
+iflag_thermals_optflux=0
+#shema de la couche de surface (D:1, 1:LMD, 8:Mellor-Yamada) 
+iflag_pbl=11
+#diffusion turbulente
+ksta_ter=1.e-7
+ksta=1.e-10
+#ok_kzmin : calcul Kzmin dans la CL de surface
+ok_kzmin=y
+#couplage ou non avec la convection
+iflag_coupl=5 (0:AR4 et 1:nouvelle physique)
+seuil_inversion=-0.08
+#rendement sur la puissance fournie par les thermiques a la convection
+alp_bl_k=0.5
+#
+## temperature dependency of qsat for iterative procedure
+## temporary flag to switch between the old (CMIP5, D=0) and new versions (=1) versions 
+iflag_fisrtilp_qsat=4 
+## Reactivation du calcul d'un zmax continu pour les thermiques
+## reactivation d'une fermeture humide des thermiques  iflag_thermals_closure=2 (D=1)
+iflag_thermals_closure=1
+#
+# Flags wakes
+#************
+#Wake scheme switch (D:0, 0:AR4, 1:New Physics)
+iflag_wake=1
+#Constant value to be added to Alp (D: 0.)
+alp_offset=0.
+
+### nrlmd le 10/04/2012: Declenchement ###
+#Declenchement par couche-limite (0: deterministe, 1: stochastique)
+iflag_trig_bl=1
+#Surface critique au LCL
+s_trig=1.2e7
+#Temps de decorrelation entre scenes de cumulus
+tau_trig_shallow=1200
+#Temps de decorrelation entre scenes de cumulonimbus
+tau_trig_deep=1200
+# Pour la stabilisation
+random_notrig_max=0.99
+ok_adjwk=y
+tmax_fonte_cv=278.15
+
+
+### nrlmd le 10/04/2012: Fermeture ###
+#Fermeture par couche-limite (0: deterministe, 1: statistique, 2: statistique+convergence grande echelle)
+iflag_clos_bl=1
+### fin nrlmd le 10/04/2012
+
+## Modification de la plage de temperature pour la phase mixte liquide/glace des nuages
+## Controle par les t_glace_min/max, exposant_glace, iflag_t_glace (D=0)
+t_glace_min=233.13
+t_glace_max=273.13
+exposant_glace=1.
+iflag_t_glace=2
+iflag_ice_thermo=1
+
+#
+## The source terms of the TKE prognostic equation are diagnosed from tendencies (du, dv, dT) 
+## associated with subrgrid scaleamotions and treated as an additional heat source.
+## Controled by a key, iflag_ener_conserv (D=-1):
+## 0 : no conservation, -1 : old adhoc correction for kinetic E only (used for CMIP5) 
+## 1 : conservation, 101 : conversion from kinetic to heat only, 110 conversion from potential to heat only
+iflag_ener_conserv=1
+
+#Activation of corrections for water conservation (D: n). 
+##The default is n for compatibility with earlier versions.
+##generally it should be y.
+ok_conserv_q=y 
+
+iflag_cloudth_vert=3
+
+#
+lmixmin=10.
+#pbl_lmixmin_alpha=0.05
+
+#Bergeron
+iflag_bergeron=1
+
+
+### Convection
+#altitude, in hPa, above LCL at which buoybase is computed, def = original: -40
+dpbase=-40.
+#altitude, in hPa, above LCL below which Ep=0, def = original: 150, used only if flag_epKEorig=0
+pbcrit=150.0
+#altitude, in hPa, above LCL above which Ep=Epmax, def = original: 500, used only if flag_epKEorig=0
+ptcrit=500.0
+#reference fractional area of precipitating downdraughts, def = original: 0.01
+sigdz=0.01
+#unsaturated fraction of precipitating downdraughts, def = original: 0.15
+spfac=0.15
+#relaxation time of cloud base mass flux, def = original: 8000
+tau=8000.
+#flag for wb (= vert velocity at LFC); 0->wb=wbmax, 1->wb=f(plfc) bounded, 2->wb=f(plfc) linear, def = 1
+flag_wb=1
+#parameter used in the computation of wb, def = 6.
+wbmax=6.
+#
+ok_convstop=.False.
+#
+tau_stop=15000.
+#
+ok_intermittent=.False.
+#shedding coefficient (used when iflag_mix_adiab=1)
+coef_peel=0.25
+#
+### Clouds
+#Conversion cld water->precip: Ep=f(pressure) if 0; Ep=f(temperature) if 1, def=1
+flag_epKEorig=1
+#max condensed water concentration in kg/kg, def=0.0003, original: 0.0011, used only if flag_epKEorig=1
+elcrit=0.00025
+#temperature in degre Celsius, at which Ep=Epmax, def=-55., original: -55, used only if flag_epKEorig=1
+tlcrit=-40.
+
+### Wakes
+#coefficient in Wape->C_star formula: C_star=stark*sqrt(2*Wape), def: 0.33
+stark=0.33
+#lifting efficiency of wakes; Alp=Alpk*Fip, Fip=power provided by wakes, def: 0.25
+alpk=0.25
+#wake density = number of wake centers per m2, def: 8.E-12
+wdens_ref=8.E-12
+#multiplicative factor of the damping by gravity waves, def: 4.
+coefgw=4.
+#
+### Les parametres suivants viennent du config.def
+# constante solaire lue dans un fichier par defaut
+ok_suntime_rrtm=y
+# Aerosols stratospheriques utilises par defaut
+flag_aerosol_strat=2
Index: CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/physiq.def_NPv5.80bz0
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/physiq.def_NPv5.80bz0	(revision 3559)
+++ CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/physiq.def_NPv5.80bz0	(revision 3559)
@@ -0,0 +1,252 @@
+#
+# $Id: physiq.def_NPv5.80a 2925 2016-07-22 13:33:42Z lfairhead $
+#
+##############################################################################
+# PARAMETRES ET CLES DE LA PHYSIQUE LMDZ
+##############################################################################
+# D: Valeur par default
+#
+#Parametres Orographiques et cdrags
+#**********************************
+##   Si=.T. ,  lecture du fichier limit avec la bonne annee 
+ok_limitvrai=n
+iflag_albedo=1
+#Cdrags 
+f_cdrag_stable=1.
+f_cdrag_ter=1.
+f_cdrag_oce=1
+iflag_z0_oce=1
+f_z0qh_oce=1.55
+min_wind_speed=0.1
+f_ri_cd_min=0.1
+#cdmmax
+cdmmax=2.5E-3
+#cdhmax
+cdhmax=2.0E-3
+##  Orodr  ou  non   pour l orographie
+ok_orodr=y
+##  Orolf  ou  non   pour l orographie              
+ok_orolf=y
+#Rugoro
+f_rugoro=0.
+#
+### Random gravity waves
+#Activitate the stochastic parameterization of convective GWs (should be equal to ok_strato)
+ok_gwd_rando=y
+# Scale the momentum fluxes due to convective GWs
+gwd_rando_ruwmax=2.5
+#Scale the saturated momentum flux of  convective GWs 
+gwd_rando_sat=0.2
+
+sso_gkdrag=0.2
+sso_gfrcri=0.70
+sso_gkwake=0.40
+#
+# Rayonnement
+#*********************
+# activation du nouveau code de rayonnement RRTM
+# 0 : Ancien code et 1 : RRTM (D=0)
+iflag_rrtm=1
+NSW=6
+#
+# Parametres nuages
+#******************
+#seuils de la precipitation des nuages strateformes (D: 2.6e-4 2.6e-4)
+cld_lc_lsc=0.0002
+cld_lc_con=0.0002
+#constante de temps pour eleminer eau lsc et convective (D: 3600. 3600.)
+cld_tau_lsc=900.
+cld_tau_con=900.
+#facteurs correctifs sur la vitesse de chute des cristaux de glace (D: 1 1)
+ffallv_lsc=0.5
+ffallv_con=0.5
+#coefficient sur la reevaporation de la pluie (D: 2.e-5 n)
+coef_eva=2e-4
+reevap_ice=y
+#calcul des proprietes des nuages convectifs (D:1 0.375 1.e-4) 
+iflag_cldcon=6
+fact_cldcon=1.
+facttemps=0.
+#calcul eau condensee et fraction nuageuse a partir des PDF (D:0, 0:version avec ratqs sinon nouvelles PDFs)  
+iflag_pdf=1
+#calcul epaisseur optique et emmissivite des nuages (D: y 1 0.01 0.3)
+ok_newmicro=y
+iflag_ratqs=4
+ratqsp0=43700.
+ratqsdp=20000.
+ratqsbas=0.002
+ratqshaut=0.4
+#rayon effectif pour les nuages de glace (D:35)
+rad_froid=35
+#rayons effectifs pour les nuages eau liq (tailles des gouttes d eau nuageuse, D: 13 9)
+rad_chau1=12
+rad_chau2=11
+##  Choix ou non  de  New oliq               
+new_oliq=y
+# Seuils oliqmax, oicemax
+oliqmax=1.5E-3
+oicemax=1.5E-3
+#Rayons min et max effectifs des particules des nuages
+rei_min=16.
+rei_max=61.29
+#
+# Flags Convection 
+#*****************
+#Convection scheme switch (D:2, 1:LMD, 2:Tiedtke, 3:KE New Physics, 30:KE AR4)
+iflag_con=3
+#output level of energy conservation diagnostics
+if_ebil=0
+#maximum efficiency of cld water->precipitation conversion (D: 0.993)
+epmax=0.999
+#dry convective adjustment at beginning of Emanuel convective scheme (D: n 0)
+ok_adj_ema=n
+iflag_clw=0
+#Convective closure (D:1, 0:AR4, 2:ALE and ALP)
+iflag_clos=2
+#Convective entrainment mixing law (D:1, 0:AR4=flat PDF, 1=PDF)
+iflag_mix=1
+#weights of the bell shaped and flat PDF (used only if iflag_mix=1) (D: 1 0)
+qqa1=1.
+qqa2=0.
+#Parameters of the bell shaped PDF; Fmax=center (D= 0.65), Gammas=width (D=0.05)
+cvl_corr=1.0
+#Multiplicative factor of Emanuel convective scheme precipitation (D: 1.)
+Fmax=0.65
+#
+# Flags Couche limite
+#********************
+#shema de CL des thermiques (D:0, 0:ajustement sec,=>1:versions thermiques) 
+iflag_thermals=18
+#pas de temps du spliting pour les thermiques
+nsplit_thermals=1
+tau_thermals=0.
+iflag_thermals_ed=8
+fact_thermals_ed_dz=0.1
+iflag_thermals_optflux=0
+#shema de la couche de surface (D:1, 1:LMD, 8:Mellor-Yamada) 
+iflag_pbl=11
+#diffusion turbulente
+ksta_ter=1.e-7
+ksta=1.e-10
+#ok_kzmin : calcul Kzmin dans la CL de surface
+ok_kzmin=y
+#couplage ou non avec la convection
+iflag_coupl=5 (0:AR4 et 1:nouvelle physique)
+seuil_inversion=-0.08
+#rendement sur la puissance fournie par les thermiques a la convection
+alp_bl_k=0.5
+#
+## temperature dependency of qsat for iterative procedure
+## temporary flag to switch between the old (CMIP5, D=0) and new versions (=1) versions 
+iflag_fisrtilp_qsat=4 
+## Reactivation du calcul d'un zmax continu pour les thermiques
+## reactivation d'une fermeture humide des thermiques  iflag_thermals_closure=2 (D=1)
+iflag_thermals_closure=1
+#
+# Flags wakes
+#************
+#Wake scheme switch (D:0, 0:AR4, 1:New Physics)
+iflag_wake=1
+#Constant value to be added to Alp (D: 0.)
+alp_offset=0.
+
+### nrlmd le 10/04/2012: Declenchement ###
+#Declenchement par couche-limite (0: deterministe, 1: stochastique)
+iflag_trig_bl=1
+#Surface critique au LCL
+s_trig=1.2e7
+#Temps de decorrelation entre scenes de cumulus
+tau_trig_shallow=1200
+#Temps de decorrelation entre scenes de cumulonimbus
+tau_trig_deep=1200
+# Pour la stabilisation
+random_notrig_max=0.99
+ok_adjwk=y
+tmax_fonte_cv=278.15
+
+
+### nrlmd le 10/04/2012: Fermeture ###
+#Fermeture par couche-limite (0: deterministe, 1: statistique, 2: statistique+convergence grande echelle)
+iflag_clos_bl=1
+### fin nrlmd le 10/04/2012
+
+## Modification de la plage de temperature pour la phase mixte liquide/glace des nuages
+## Controle par les t_glace_min/max, exposant_glace, iflag_t_glace (D=0)
+t_glace_min=233.13
+t_glace_max=273.13
+exposant_glace=1.
+iflag_t_glace=2
+iflag_ice_thermo=1
+
+#
+## The source terms of the TKE prognostic equation are diagnosed from tendencies (du, dv, dT) 
+## associated with subrgrid scaleamotions and treated as an additional heat source.
+## Controled by a key, iflag_ener_conserv (D=-1):
+## 0 : no conservation, -1 : old adhoc correction for kinetic E only (used for CMIP5) 
+## 1 : conservation, 101 : conversion from kinetic to heat only, 110 conversion from potential to heat only
+iflag_ener_conserv=1
+
+#Activation of corrections for water conservation (D: n). 
+##The default is n for compatibility with earlier versions.
+##generally it should be y.
+ok_conserv_q=y 
+
+iflag_cloudth_vert=3
+
+#
+lmixmin=10.
+#pbl_lmixmin_alpha=0.05
+
+#Bergeron
+iflag_bergeron=1
+
+
+### Convection
+#altitude, in hPa, above LCL at which buoybase is computed, def = original: -40
+dpbase=-40.
+#altitude, in hPa, above LCL below which Ep=0, def = original: 150, used only if flag_epKEorig=0
+pbcrit=150.0
+#altitude, in hPa, above LCL above which Ep=Epmax, def = original: 500, used only if flag_epKEorig=0
+ptcrit=500.0
+#reference fractional area of precipitating downdraughts, def = original: 0.01
+sigdz=0.01
+#unsaturated fraction of precipitating downdraughts, def = original: 0.15
+spfac=0.15
+#relaxation time of cloud base mass flux, def = original: 8000
+tau=8000.
+#flag for wb (= vert velocity at LFC); 0->wb=wbmax, 1->wb=f(plfc) bounded, 2->wb=f(plfc) linear, def = 1
+flag_wb=1
+#parameter used in the computation of wb, def = 6.
+wbmax=6.
+#
+ok_convstop=.False.
+#
+tau_stop=15000.
+#
+ok_intermittent=.False.
+#shedding coefficient (used when iflag_mix_adiab=1)
+coef_peel=0.25
+#
+### Clouds
+#Conversion cld water->precip: Ep=f(pressure) if 0; Ep=f(temperature) if 1, def=1
+flag_epKEorig=1
+#max condensed water concentration in kg/kg, def=0.0003, original: 0.0011, used only if flag_epKEorig=1
+elcrit=0.00025
+#temperature in degre Celsius, at which Ep=Epmax, def=-55., original: -55, used only if flag_epKEorig=1
+tlcrit=-40.
+
+### Wakes
+#coefficient in Wape->C_star formula: C_star=stark*sqrt(2*Wape), def: 0.33
+stark=0.33
+#lifting efficiency of wakes; Alp=Alpk*Fip, Fip=power provided by wakes, def: 0.25
+alpk=0.25
+#wake density = number of wake centers per m2, def: 8.E-12
+wdens_ref=8.E-12
+#multiplicative factor of the damping by gravity waves, def: 4.
+coefgw=4.
+#
+### Les parametres suivants viennent du config.def
+# constante solaire lue dans un fichier par defaut
+ok_suntime_rrtm=y
+# Aerosols stratospheriques utilises par defaut
+flag_aerosol_strat=2
Index: CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/physiq.def_NPv6.0.10
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/physiq.def_NPv6.0.10	(revision 3559)
+++ CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/physiq.def_NPv6.0.10	(revision 3559)
@@ -0,0 +1,282 @@
+#
+# $Id: physiq.def_NPv6.0.10 2846 2017-04-11 14:05:05Z musat $
+#
+##############################################################################
+# PARAMETRES ET CLES DE LA PHYSIQUE LMDZ
+##############################################################################
+# D: Valeur par default
+#
+#Parametres Orographiques et cdrags
+#**********************************
+##   Si=.T. ,  lecture du fichier limit avec la bonne annee 
+ok_limitvrai=n
+iflag_albedo=1
+#Cdrags 
+f_cdrag_stable=1.
+f_cdrag_ter=1.
+
+#parameter for Z0
+f_cdrag_oce=0.9
+iflag_z0_oce=1
+f_z0qh_oce=1.55
+min_wind_speed=0.1
+
+f_ri_cd_min=0.1
+#cdmmax
+cdmmax=2.5E-3
+#cdhmax
+cdhmax=2.0E-3
+##  Orodr  ou  non   pour l orographie
+ok_orodr=y
+##  Orolf  ou  non   pour l orographie              
+ok_orolf=y
+#Rugoro
+f_rugoro=0.
+#
+### Random gravity waves
+#Activitate the stochastic parameterization of convective GWs (should be equal to ok_strato)
+ok_gwd_rando=y
+# Scale the momentum fluxes due to convective GWs
+gwd_rando_ruwmax=0.23
+#Scale the saturated momentum flux of  convective GWs 
+gwd_rando_sat=0.60
+#
+gwd_front_ruwmax = 4.00
+sso_gfrcri=0.70
+sso_gkdrag=0.6
+sso_gkwake=1.0
+sso_gklift=0.1
+#
+# Rayonnement
+#*********************
+# activation du nouveau code de rayonnement RRTM
+# 0 : Ancien code et 1 : RRTM (D=0)
+iflag_rrtm=1
+NSW=6
+#
+# Parametres nuages
+#******************
+#seuils de la precipitation des nuages strateformes (D: 2.6e-4 2.6e-4)
+cld_lc_lsc=0.00011
+cld_lc_con=0.00011
+#constante de temps pour eleminer eau lsc et convective (D: 3600. 3600.)
+cld_tau_lsc=900.
+cld_tau_con=900.
+#facteurs correctifs sur la vitesse de chute des cristaux de glace (D: 1 1)
+ffallv_lsc=1.
+ffallv_con=1.
+#coefficient sur la reevaporation de la pluie (D: 2.e-5 n)
+coef_eva=4.5e-5
+reevap_ice=y
+#calcul des proprietes des nuages convectifs (D:1 0.375 1.e-4) 
+iflag_cldcon=6
+fact_cldcon=1.
+facttemps=0.
+#calcul eau condensee et fraction nuageuse a partir des PDF (D:0, 0:version avec ratqs sinon nouvelles PDFs)  
+iflag_pdf=1
+#calcul epaisseur optique et emmissivite des nuages (D: y 1 0.01 0.3)
+ok_newmicro=y
+iflag_ratqs=4
+ratqsp0=45000.
+ratqsdp=20000.
+ratqsbas=0.002
+ratqshaut=0.4
+#rayon effectif pour les nuages de glace (D:35)
+rad_froid=35
+#rayons effectifs pour les nuages eau liq (tailles des gouttes d eau nuageuse, D: 13 9)
+rad_chau1=12
+rad_chau2=11
+##  Choix ou non  de  New oliq               
+new_oliq=y
+# Seuils oliqmax, oicemax
+oliqmax=1.5E-3
+oicemax=1.5E-3
+#Rayons min et max effectifs des particules des nuages
+rei_min=16.
+rei_max=61.29
+#
+# Flags Convection 
+#*****************
+#Convection scheme switch (D:2, 1:LMD, 2:Tiedtke, 3:KE New Physics, 30:KE AR4)
+iflag_con=3
+#output level of energy conservation diagnostics
+if_ebil=0
+#maximum efficiency of cld water->precipitation conversion (D: 0.993)
+epmax=0.997
+#dry convective adjustment at beginning of Emanuel convective scheme (D: n 0)
+ok_adj_ema=n
+iflag_clw=0
+#Convective closure (D:1, 0:AR4, 2:ALE and ALP)
+iflag_clos=2
+#Convective entrainment mixing law (D:1, 0:AR4=flat PDF, 1=PDF)
+iflag_mix=1
+#weights of the bell shaped and flat PDF (used only if iflag_mix=1) (D: 1 0)
+qqa1=1.
+qqa2=0.
+#Parameters of the bell shaped PDF; Fmax=center (D= 0.65), Gammas=width (D=0.05)
+cvl_corr=1.0
+#Multiplicative factor of Emanuel convective scheme precipitation (D: 1.)
+Fmax=0.65
+#
+t_top_max=275.
+#
+# Flags Couche limite
+#********************
+#shema de CL des thermiques (D:0, 0:ajustement sec,=>1:versions thermiques) 
+iflag_thermals=18
+#pas de temps du spliting pour les thermiques
+nsplit_thermals=1
+tau_thermals=0.
+iflag_thermals_ed=8
+fact_thermals_ed_dz=0.08
+iflag_thermals_optflux=0
+#shema de la couche de surface (D:1, 1:LMD, 8:Mellor-Yamada) 
+iflag_pbl=11
+#diffusion turbulente
+ksta_ter=1.e-7
+ksta=1.e-10
+#ok_kzmin : calcul Kzmin dans la CL de surface
+ok_kzmin=y
+#couplage ou non avec la convection
+iflag_coupl=5 (0:AR4 et 1:nouvelle physique)
+seuil_inversion=-0.08
+#rendement sur la puissance fournie par les thermiques a la convection
+alp_bl_k=0.5
+#
+## temperature dependency of qsat for iterative procedure
+## temporary flag to switch between the old (CMIP5, D=0) and new versions (=1) versions 
+iflag_fisrtilp_qsat=4 
+## Reactivation du calcul d un zmax continu pour les thermiques
+## reactivation d une fermeture humide des thermiques  iflag_thermals_closure=2 (D=1)
+iflag_thermals_closure=1
+#
+# Flags wakes
+#************
+#Wake scheme switch (D:0, 0:AR4, 1:New Physics)
+iflag_wake=1
+#Constant value to be added to Alp (D: 0.)
+alp_offset=0.
+
+### nrlmd le 10/04/2012: Declenchement ###
+#Declenchement par couche-limite (0: deterministe, 1: stochastique)
+iflag_trig_bl=1
+#Surface critique au LCL
+s_trig=1.2e7
+#Temps de decorrelation entre scenes de cumulus
+tau_trig_shallow=1200
+#Temps de decorrelation entre scenes de cumulonimbus
+tau_trig_deep=1200
+# Pour la stabilisation
+random_notrig_max=0.99
+ok_adjwk=y
+tmax_fonte_cv=278.15
+#
+flag_wk_check_trgl=y
+#
+cv_flag_feed=2
+
+### nrlmd le 10/04/2012: Fermeture ###
+#Fermeture par couche-limite (0: deterministe, 1: statistique, 2: statistique+convergence grande echelle)
+iflag_clos_bl=1
+### fin nrlmd le 10/04/2012
+
+## Modification de la plage de temperature pour la phase mixte liquide/glace des nuages
+## Controle par les t_glace_min/max, exposant_glace, iflag_t_glace (D=0)
+t_glace_min=243.15
+t_glace_max=273.15
+exposant_glace=2.
+iflag_t_glace=2
+iflag_ice_thermo=1
+
+#
+## The source terms of the TKE prognostic equation are diagnosed from tendencies (du, dv, dT) 
+## associated with subrgrid scaleamotions and treated as an additional heat source.
+## Controled by a key, iflag_ener_conserv (D=-1):
+## 0 : no conservation, -1 : old adhoc correction for kinetic E only (used for CMIP5) 
+## 1 : conservation, 101 : conversion from kinetic to heat only, 110 conversion from potential to heat only
+iflag_ener_conserv=1
+
+#Activation of corrections for water conservation (D: n). 
+##The default is n for compatibility with earlier versions.
+##generally it should be y.
+ok_conserv_q=y 
+
+iflag_cloudth_vert=3
+
+#
+lmixmin=10.
+#pbl_lmixmin_alpha=0.05
+
+#Bergeron
+iflag_bergeron=2
+
+
+### Convection
+#altitude, in hPa, above LCL at which buoybase is computed, def = original: -40
+dpbase=-40.
+#altitude, in hPa, above LCL below which Ep=0, def = original: 150, used only if flag_epKEorig=0
+pbcrit=150.0
+#altitude, in hPa, above LCL above which Ep=Epmax, def = original: 500, used only if flag_epKEorig=0
+ptcrit=500.0
+#reference fractional area of precipitating downdraughts, def = original: 0.01
+sigdz=0.01
+#unsaturated fraction of precipitating downdraughts, def = original: 0.15
+spfac=0.15
+#relaxation time of cloud base mass flux, def = original: 8000
+tau=8000.
+#flag for wb (= vert velocity at LFC); 0->wb=wbmax, 1->wb=f(plfc) bounded, 2->wb=f(plfc) linear, def = 1
+flag_wb=1
+#parameter used in the computation of wb, def = 6.
+wbmax=6.
+#
+ok_convstop=.False.
+#
+tau_stop=15000.
+#
+ok_intermittent=.False.
+# nouvel epluchage de C.Rio
+iflag_mix_adiab=0
+#shedding coefficient (used when iflag_mix_adiab=1)
+coef_peel=0.25
+#
+### Clouds
+#Conversion cld water->precip: Ep=f(pressure) if 0; Ep=f(temperature) if 1, def=1
+flag_epKEorig=1
+#max condensed water concentration in kg/kg, def=0.0003, original: 0.0011, used only if flag_epKEorig=1
+elcrit=0.00025
+#temperature in degre Celsius, at which Ep=Epmax, def=-55., original: -55, used only if flag_epKEorig=1
+tlcrit=-40.
+
+### Wakes
+#coefficient in Wape->C_star formula: C_star=stark*sqrt(2*Wape), def: 0.33
+stark=0.33
+#lifting efficiency of wakes; Alp=Alpk*Fip, Fip=power provided by wakes, def: 0.25
+alpk=0.25
+#wake density = number of wake centers per m2, def: 8.E-12
+#wdens_ref=8.E-12
+wdens_ref_o=1.e-9
+wdens_ref_l=8.e-12
+#
+#multiplicative factor of the damping by gravity waves, def: 4.
+coefgw=4.
+#
+alb_vis_sno_lic=0.96
+alb_nir_sno_lic=0.68
+inertie_sno=350.
+
+nbapp_cv=48
+
+# Prevent some crashes
+# Filter out bad wakes
+flag_wk_check_trgl=y
+# Check whether parcel level temperature and specific humidity
+# are reasonable and demand that LCL be high enough
+cv_flag_feed=2
+
+# Correction bug for thermodynamical constants passed to rrtm
+ok_bad_ecmwf_thermo=n
+# Check for energy conservation
+fl_cor_ebil=1
+
+# save 20% CPU 
+ok_optim_yield=y
Index: CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/physiq.def_NPv6.0.11
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/physiq.def_NPv6.0.11	(revision 3559)
+++ CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/physiq.def_NPv6.0.11	(revision 3559)
@@ -0,0 +1,283 @@
+#
+# $Id: physiq.def_NPv6.0.11 3301 2017-07-07 09:46:45Z jgipsl $
+#
+##############################################################################
+# PARAMETRES ET CLES DE LA PHYSIQUE LMDZ
+##############################################################################
+# D: Valeur par default
+#
+#Parametres Orographiques et cdrags
+#**********************************
+##   Si=.T. ,  lecture du fichier limit avec la bonne annee 
+ok_limitvrai=n
+iflag_albedo=1
+#Cdrags 
+f_cdrag_stable=1.
+f_cdrag_ter=1.
+
+#parameter for Z0
+f_cdrag_oce=1.
+iflag_z0_oce=1
+f_z0qh_oce=1.55
+min_wind_speed=0.1
+
+new_yamada4=y
+yamada4_num=5
+iflag_corr_sta=4
+f_ri_cd_min=0.01
+yamada4_ric=0.18
+lmixmin=0.
+#cdmmax
+cdmmax=2.5E-3
+#cdhmax
+cdhmax=2.0E-3
+##  Orodr  ou  non   pour l orographie
+ok_orodr=y
+##  Orolf  ou  non   pour l orographie              
+ok_orolf=y
+#Rugoro
+f_rugoro=0.
+#
+### Random gravity waves
+#Activitate the stochastic parameterization of convective GWs (should be equal to ok_strato)
+ok_gwd_rando=y
+# Scale the momentum fluxes due to convective GWs
+gwd_rando_ruwmax=0.23
+#Scale the saturated momentum flux of  convective GWs 
+gwd_rando_sat=0.60
+#
+gwd_front_ruwmax = 4.00
+
+sso_gfrcri=0.70
+sso_gkdrag=0.6
+sso_gkwake=0.4
+sso_gklift=0.1
+#
+# Rayonnement
+#*********************
+# activation du nouveau code de rayonnement RRTM
+# 0 : Ancien code et 1 : RRTM (D=0)
+iflag_rrtm=1
+NSW=6
+#
+# Parametres nuages
+#******************
+#seuils de la precipitation des nuages strateformes (D: 2.6e-4 2.6e-4)
+cld_lc_lsc=0.0000783
+cld_lc_con=0.0000783
+#constante de temps pour eleminer eau lsc et convective (D: 3600. 3600.)
+cld_tau_lsc=900.
+cld_tau_con=900.
+#facteurs correctifs sur la vitesse de chute des cristaux de glace (D: 1 1)
+ffallv_lsc=0.6
+ffallv_con=0.6
+#coefficient sur la reevaporation de la pluie (D: 2.e-5 n)
+coef_eva=1.e-4
+reevap_ice=y
+#calcul des proprietes des nuages convectifs (D:1 0.375 1.e-4) 
+iflag_cldcon=6
+fact_cldcon=1.
+facttemps=0.
+#calcul eau condensee et fraction nuageuse a partir des PDF (D:0, 0:version avec ratqs sinon nouvelles PDFs)  
+iflag_pdf=1
+#calcul epaisseur optique et emmissivite des nuages (D: y 1 0.01 0.3)
+ok_newmicro=y
+iflag_ratqs=4
+ratqsp0=45000.
+ratqsdp=20000.
+ratqsbas=0.002
+ratqshaut=0.4
+#rayon effectif pour les nuages de glace (D:35)
+rad_froid=35
+#rayons effectifs pour les nuages eau liq (tailles des gouttes d eau nuageuse, D: 13 9)
+rad_chau1=12
+rad_chau2=11
+##  Choix ou non  de  New oliq               
+new_oliq=y
+# Seuils oliqmax, oicemax
+oliqmax=1.5E-3
+oicemax=1.5E-3
+#Rayons min et max effectifs des particules des nuages
+rei_min=16.
+rei_max=61.29
+#
+# Flags Convection 
+#*****************
+#Convection scheme switch (D:2, 1:LMD, 2:Tiedtke, 3:KE New Physics, 30:KE AR4)
+iflag_con=3
+#output level of energy conservation diagnostics
+if_ebil=0
+#maximum efficiency of cld water->precipitation conversion (D: 0.993)
+epmax=0.9985
+#dry convective adjustment at beginning of Emanuel convective scheme (D: n 0)
+ok_adj_ema=n
+iflag_clw=0
+#Convective closure (D:1, 0:AR4, 2:ALE and ALP)
+iflag_clos=2
+#Convective entrainment mixing law (D:1, 0:AR4=flat PDF, 1=PDF)
+iflag_mix=1
+#weights of the bell shaped and flat PDF (used only if iflag_mix=1) (D: 1 0)
+qqa1=1.
+qqa2=0.
+#Parameters of the bell shaped PDF; Fmax=center (D= 0.65), Gammas=width (D=0.05)
+cvl_corr=1.0
+#Multiplicative factor of Emanuel convective scheme precipitation (D: 1.)
+Fmax=0.65
+#
+t_top_max=255.
+#
+# Flags Couche limite
+#********************
+#shema de CL des thermiques (D:0, 0:ajustement sec,=>1:versions thermiques) 
+iflag_thermals=18
+#pas de temps du spliting pour les thermiques
+nsplit_thermals=1
+tau_thermals=0.
+iflag_thermals_ed=8
+fact_thermals_ed_dz=0.07
+iflag_thermals_optflux=0
+#shema de la couche de surface (D:1, 1:LMD, 8:Mellor-Yamada) 
+iflag_pbl=12
+#diffusion turbulente
+ksta_ter=1.e-7
+ksta=1.e-10
+#ok_kzmin : calcul Kzmin dans la CL de surface
+### ok_kzmin=y
+#couplage ou non avec la convection
+iflag_coupl=5 (0:AR4 et 1:nouvelle physique)
+seuil_inversion=-0.08
+#rendement sur la puissance fournie par les thermiques a la convection
+alp_bl_k=0.5
+#
+## temperature dependency of qsat for iterative procedure
+## temporary flag to switch between the old (CMIP5, D=0) and new versions (=1) versions 
+iflag_fisrtilp_qsat=4 
+## Reactivation du calcul d un zmax continu pour les thermiques
+## reactivation d une fermeture humide des thermiques  iflag_thermals_closure=2 (D=1)
+iflag_thermals_closure=2
+#
+# Flags wakes
+#************
+#Wake scheme switch (D:0, 0:AR4, 1:New Physics)
+iflag_wake=1
+#Constant value to be added to Alp (D: 0.)
+alp_offset=0.
+
+### nrlmd le 10/04/2012: Declenchement ###
+#Declenchement par couche-limite (0: deterministe, 1: stochastique)
+iflag_trig_bl=1
+#Surface critique au LCL
+s_trig=1.2e7
+#Temps de decorrelation entre scenes de cumulus
+tau_trig_shallow=1200
+#Temps de decorrelation entre scenes de cumulonimbus
+tau_trig_deep=1200
+# Pour la stabilisation
+random_notrig_max=0.99
+ok_adjwk=y
+tmax_fonte_cv=278.15
+#
+
+### nrlmd le 10/04/2012: Fermeture ###
+#Fermeture par couche-limite (0: deterministe, 1: statistique, 2: statistique+convergence grande echelle)
+iflag_clos_bl=1
+### fin nrlmd le 10/04/2012
+
+## Modification de la plage de temperature pour la phase mixte liquide/glace des nuages
+## Controle par les t_glace_min/max, exposant_glace, iflag_t_glace (D=0)
+t_glace_min=243.15
+t_glace_max=273.15
+exposant_glace=2.
+iflag_t_glace=2
+iflag_ice_thermo=1
+
+#
+## The source terms of the TKE prognostic equation are diagnosed from tendencies (du, dv, dT) 
+## associated with subrgrid scaleamotions and treated as an additional heat source.
+## Controled by a key, iflag_ener_conserv (D=-1):
+## 0 : no conservation, -1 : old adhoc correction for kinetic E only (used for CMIP5) 
+## 1 : conservation, 101 : conversion from kinetic to heat only, 110 conversion from potential to heat only
+iflag_ener_conserv=1
+
+#Activation of corrections for water conservation (D: n). 
+##The default is n for compatibility with earlier versions.
+##generally it should be y.
+ok_conserv_q=y 
+
+iflag_cloudth_vert=3
+
+#
+
+#Bergeron
+iflag_bergeron=2
+
+
+### Convection
+#altitude, in hPa, above LCL at which buoybase is computed, def = original: -40
+dpbase=-40.
+#altitude, in hPa, above LCL below which Ep=0, def = original: 150, used only if flag_epKEorig=0
+pbcrit=150.0
+#altitude, in hPa, above LCL above which Ep=Epmax, def = original: 500, used only if flag_epKEorig=0
+ptcrit=500.0
+#reference fractional area of precipitating downdraughts, def = original: 0.01
+sigdz=0.01
+#unsaturated fraction of precipitating downdraughts, def = original: 0.15
+spfac=0.15
+#relaxation time of cloud base mass flux, def = original: 8000
+tau=8000.
+#flag for wb (= vert velocity at LFC); 0->wb=wbmax, 1->wb=f(plfc) bounded, 2->wb=f(plfc) linear, def = 1
+flag_wb=1
+#parameter used in the computation of wb, def = 6.
+wbmax=6.
+#
+ok_convstop=.False.
+#
+tau_stop=15000.
+#
+ok_intermittent=.False.
+# nouvel epluchage de C.Rio
+iflag_mix_adiab=0
+#shedding coefficient (used when iflag_mix_adiab=1)
+coef_peel=0.25
+#
+### Clouds
+#Conversion cld water->precip: Ep=f(pressure) if 0; Ep=f(temperature) if 1, def=1
+flag_epKEorig=1
+#max condensed water concentration in kg/kg, def=0.0003, original: 0.0011, used only if flag_epKEorig=1
+elcrit=0.00025
+#temperature in degre Celsius, at which Ep=Epmax, def=-55., original: -55, used only if flag_epKEorig=1
+tlcrit=-40.
+
+### Wakes
+#coefficient in Wape->C_star formula: C_star=stark*sqrt(2*Wape), def: 0.33
+stark=0.33
+#lifting efficiency of wakes; Alp=Alpk*Fip, Fip=power provided by wakes, def: 0.25
+alpk=0.25
+#wake density = number of wake centers per m2, def: 8.E-12
+#wdens_ref=8.E-12
+wdens_ref_o=1.e-9
+wdens_ref_l=8.e-12
+#
+#multiplicative factor of the damping by gravity waves, def: 4.
+coefgw=4.
+#
+alb_vis_sno_lic=0.96
+alb_nir_sno_lic=0.68
+inertie_sno=350.
+
+nbapp_cv=48
+# Prevent some crashes
+# Filter out bad wakes
+flag_wk_check_trgl=y
+# Check whether parcel level temperature and specific humidity
+# are reasonable and demand that LCL be high enough
+cv_flag_feed=2
+#
+#
+# Correction sur ctes passees a rrtm
+ok_bad_ecmwf_thermo=n
+# Conservation de l energie
+fl_cor_ebil=1
+#
+# save 20% CPU 
+ok_optim_yield=y
Index: CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/physiq.def_NPv6.0.12
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/physiq.def_NPv6.0.12	(revision 3559)
+++ CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/physiq.def_NPv6.0.12	(revision 3559)
@@ -0,0 +1,502 @@
+#
+# $Id: physiq.def_NPv6.0.12 3312 2017-07-12 09:43:27Z aclsce $
+#
+
+##############################################################
+# PARAMETRES ET CLES DE LA PHYSIQUE LMDZ
+##############################################################
+# D: Valeur par default
+#
+
+###########################################################
+# divers. Devrait aller dans config.def ?
+###########################################################
+##   Si=.T. ,  lecture du fichier limit avec la bonne annee 
+ok_limitvrai=n
+
+###########################################################
+# Parametres couche limite de surface
+###########################################################
+
+          #  ...
+f_cdrag_stable=1.
+
+          # Facteur sur les coefficients de trainee terrestres
+f_cdrag_ter=1.
+
+          # Vitesse minimum dans les calculs de trainee Cd ( || V || + Vmin )
+min_wind_speed=0.1
+
+###########################################################
+# parameter des flux air-mer
+###########################################################
+
+          # Facteur sur les flux sensibles et latent
+          # Introduit pour reduire l evaporation quand on avait z0h=z0m
+          # CONSEILLE : 1
+f_cdrag_oce=1.
+
+          # Flag controlant le calcul des z0
+iflag_z0_oce=1
+
+          # Rapport entre les Z0 latent et sensible
+f_z0qh_oce=1.55
+
+          # Activation des rafales : Oui 1 ou non 0
+iflag_gusts=0
+
+          # facteur pour les rafales des thermiques (bounary layer)
+f_gust_bl=0.845
+
+          # facteur pour les poches (wake)
+f_gust_wk=0.2
+
+          # facteur sur qsat pour tenir compte de la salinite
+f_qsat_oce=1.
+
+          #cdmmax : valeur max de Cd moment. Sur ocean seulement
+cdmmax=2.5E-3
+
+          #cdhmax : valeur max de Cd evap/sensible. Sur ocean seulement
+cdhmax=2.0E-3
+
+####################################################################
+# Couche limite turbulente
+####################################################################
+
+          # Nouvelle version de Mellor et Yamada
+new_yamada4=y
+
+          # Choix du schema numerique pour new_yamada4=y
+          #  1 schema de MAR. Bien pour CL stables mais detruit les stratocu
+          #  5 schema de MAR modifie. Precaunise.
+yamada4_num=5
+
+          # Flag de controle de la couche limite stable
+iflag_corr_sta=4
+
+          # min sur les fonction de stabilite a la surface
+f_ri_cd_min=0.01
+
+          # max du Ric pour Kz. Decouplage plus grand pour Ric plus grand.
+yamada4_ric=0.18
+
+          # Longueur de melange minimum pour Kz
+lmixmin=0.
+
+          #shema de la couche de surface (D:1, 1:LMD, 8:Mellor-Yamada) 
+iflag_pbl=12
+
+          # Seuils pour la diffusion turbulente
+ksta_ter=1.e-7
+ksta=1.e-10
+
+          #ok_kzmin : calcul Kzmin dans la CL de surface (D: y)
+ok_kzmin=n
+
+          # Creation de TKE par orographie sous-maille
+addtkeoro=0
+alphatkeoro=1.
+smallscales_tkeoro=n
+
+
+####################################################################
+# Ondes de gravite / Orographie sous maille
+####################################################################
+
+          #  Orodr  ou  non   pour l orographie
+ok_orodr=y
+
+          #  Orolf  ou  non   pour l orographie              
+ok_orolf=y
+
+          #Rugoro : inclusion de l orographie sous maille dans le Cd de surface
+          # Obsolete avec l activation des ondes de gravite
+f_rugoro=0.
+
+          # Parametres controlant l effet de l orographie sous maille
+sso_gfrcri=0.70
+sso_gkdrag=0.6
+sso_gkwake=0.4
+sso_gklift=0.1
+
+          # Random gravity waves
+          #Activitate the stochastic parameterization of convective GWs
+          # (should be equal to ok_strato)
+ok_gwd_rando=y
+
+          # Scale the momentum fluxes due to convective GWs
+gwd_rando_ruwmax=0.50
+
+          #Scale the saturated momentum flux of  convective GWs 
+gwd_rando_sat=0.60
+
+          # Important pour controler la periode de la QBO
+gwd_front_ruwmax = 3.00
+
+
+###############################################################
+# Rayonnement
+###############################################################
+          # activation du nouveau code de rayonnement RRTM
+          # 0 : Ancien code et 1 : RRTM (D=0)
+iflag_rrtm=1
+
+          # Nombre de bandes pour le SW. Mettre 2 si iflag_rrtm=0
+NSW=6
+
+    # Albedo et inertie des calottes
+alb_vis_sno_lic=0.96
+alb_nir_sno_lic=0.68
+inertie_sno=350.
+
+          # ???
+iflag_albedo=1
+
+          # Frequence appel rayonnement. Nombre appels par jour
+nbapp_cv=48
+
+          # Pour pouvoir revenir a un bug purement informatique de duplication
+          # des constantes thermodynamiques entre LMDZ et RRTM
+          # n : FORTEMENT CONSEILLE
+ok_bad_ecmwf_thermo=n
+
+###############################################################
+# Parametres nuages
+###############################################################
+
+          #seuils de la precipitation des nuages strateformes (D: 2.6e-4 2.6e-4)
+cld_lc_lsc=0.00012
+cld_lc_con=0.00012
+
+          #constante de temps pour eleminer eau lsc et convective
+          # (D: 3600. 3600.)
+cld_tau_lsc=900.
+cld_tau_con=900.
+
+          #facteurs correctifs sur la vitesse de chute des cristaux de glace (D: 1 1)
+ffallv_lsc=0.6
+ffallv_con=0.6
+
+          # coefficient sur la reevaporation de la pluie (D: 2.e-5 n)
+          # regle a 3.e-5 sur des cas de cumulus en 1D
+coef_eva=1.e-4
+
+          # flag pour la reevaporation de la pluie
+          # 0: rien
+          # 1: a l ancienne
+          # 2: prend en compte la surface nuageuse max au dessus pour calculer
+          #    le max de reevaporation, comme ecart a la saturation. CONSEILLE
+iflag_evap_prec=1
+
+          # Modification de la plage de temperature pour la phase mixte
+          # liquide/glace des nuages
+          # Controle par les t_glace_min/max, exposant_glace,
+          # iflag_t_glace (D=0)
+t_glace_min=243.15
+t_glace_max=273.15
+exposant_glace=2.
+iflag_t_glace=2
+
+          # Activation de la thermodynamique de la glace
+iflag_ice_thermo=1
+
+          # normalement elle ne sert plus a rien dans fisrtilp
+          # sinon elle est un peu toxique:
+          # IF (zt(i) .LT. t_coup.and.reevap_ice) zrfln(i)=0. (Jean-Baptiste)
+reevap_ice=y
+
+          #Bergeron
+iflag_bergeron=2
+
+          # temperature dependency of qsat for iterative procedure
+          # temporary flag to switch between the old (CMIP5, D=0)
+          # and new versions (=1) versions 
+iflag_fisrtilp_qsat=4 
+
+          #calcul des proprietes des nuages convectifs (D:1 0.375 1.e-4) 
+iflag_cldcon=6
+fact_cldcon=1.
+
+          # ?????
+facttemps=0.
+
+          #calcul eau condensee et fraction nuageuse a partir des PDF
+          # (D:0, 0:version avec ratqs sinon nouvelles PDFs)  
+iflag_pdf=1
+
+          #calcul epaisseur optique et emmissivite des nuages (D: y 1 0.01 0.3)
+ok_newmicro=y
+
+          # Controle des ratqs grande echelle
+iflag_ratqs=4
+ratqsp0=45000.
+ratqsdp=20000.
+ratqsbas=0.002
+ratqshaut=0.4
+
+          #rayon effectif pour les nuages de glace (D:35)
+rad_froid=35
+
+          #rayons effectifs pour les nuages eau liq (tailles des gouttes
+          # d eau nuageuse, D: 13 9)
+rad_chau1=12
+rad_chau2=11
+
+          #  Choix ou non  de  New oliq               
+new_oliq=y
+
+          # Seuils oliqmax, oicemax (en g/kg).
+          # Au dela on precipite directement au sol
+oliqmax=1.5E-3
+oicemax=1.5E-3
+
+          #Rayons min et max effectifs des particules des nuages
+rei_min=16.
+rei_max=61.29
+
+          # Distribution vetricale sous maille pour le schema de de nuages.
+          # 0: rien
+          # 1: Premiere version A. Jam,
+          # 2 : J. Jouhaud, parametre cloudth_vert_alpha D=0.5
+          # 3 : J. Jouhaud, parametre cloudth_vert_alpha D=0.5/C= 1.32
+          #                           cloudth_vert_alpha_th C=2:91
+iflag_cloudth_vert=3
+cloudth_vert_alpha=0.5
+cloudth_vert_alpha_th=0.5
+
+
+######################################################################
+# Convection 
+######################################################################
+
+          #Convection scheme switch
+          # (D:2, 1:LMD, 2:Tiedtke, 3:KE New Physics, 30:KE AR4)
+iflag_con=3
+
+          #output level of energy conservation diagnostics
+if_ebil=0
+
+          #maximum efficiency of cld water->precipitation conversion (D: 0.993)
+epmax=0.9985
+
+          #dry convective adjustment at beginning of Emanuel convective scheme (D: n 0)
+ok_adj_ema=n
+iflag_clw=0
+
+          #Convective closure (D:1, 0:AR4, 2:ALE and ALP)
+iflag_clos=2
+
+          #Convective entrainment mixing law (D:1, 0:AR4=flat PDF, 1=PDF)
+iflag_mix=1
+
+          #weights of the bell shaped and flat PDF (used only if iflag_mix=1) (D: 1 0)
+qqa1=1.
+qqa2=0.
+
+          #Parameters of the bell shaped PDF; Fmax=center (D= 0.65), Gammas=width (D=0.05)
+cvl_corr=1.0
+
+          #Multiplicative factor of Emanuel convective scheme precipitation (D: 1.)
+Fmax=0.65
+          #
+t_top_max=255.
+#
+### Convection
+          #altitude, in hPa, above LCL at which buoybase is computed,
+          # def = original: -40
+dpbase=-40.
+
+          #reference fractional area of precipitating downdraughts,
+          # def = original: 0.01
+sigdz=0.01
+
+          #unsaturated fraction of precipitating downdraughts, def = original: 0.15
+spfac=0.15
+
+          #relaxation time of cloud base mass flux, def = original: 8000
+tau=8000.
+
+          #flag for wb (= vert velocity at LFC);
+          # 0->wb=wbmax, 1->wb=f(plfc) bounded, 2->wb=f(plfc) linear, D=1
+          # Si iflag_wb>=10 : wbeff_min=iflag_wb*0.1
+          # wbmax : assymptotic value 
+flag_wb=1
+wbmax=6.
+
+          # Divers tests
+ok_convstop=.False.
+tau_stop=15000.
+ok_intermittent=.False.
+
+          # nouvel epluchage de C.Rio
+          #shedding coefficient (used when iflag_mix_adiab=1)
+iflag_mix_adiab=0
+coef_peel=0.25
+
+          #Conversion cld water->precip: Ep=f(pressure) if 0; Ep=f(temperature)
+          #if 1, def=1
+flag_epKEorig=1
+
+          # Case : flag_epKEorig=1
+          # elcrit : max condensed water concentration in kg/kg, D=0.0003,
+          # tlcrit : temperature in degre Celsius, at which Ep=Epmax, D=-55. (original)
+          # original: 0.0011, used only if flag_epKEorig=1
+elcrit=0.00025
+tlcrit=-40.
+
+          # Case : flag_epKEorig=0
+          # pbcrit : pressure (hPa), above LCL below which Ep=0, D=150 (original)
+          # ptcrit : pressure (hPa), above LCL above which Ep=Epmax, D=500 (original)
+pbcrit=150.0
+ptcrit=500.0
+
+          # Prevent some crashes
+          # Filter out bad wakes
+flag_wk_check_trgl=y
+
+          # Check whether parcel level temperature and specific humidity
+          # are reasonable and demand that LCL be high enough
+cv_flag_feed=2
+
+          # save 20% CPU 
+ok_optim_yield=y
+
+
+##########################################################
+# Fermeture convective et couplages
+##########################################################
+
+          # Appel separe des thermiques 
+iflag_pbl_split=0
+
+          #rendement sur la puissance fournie par les thermiques a la convection
+alp_bl_k=0.5
+
+          #Constant value to be added to Alp (D: 0.)
+alp_offset=0.
+
+          ### nrlmd le 10/04/2012: Declenchement ###
+          #Declenchement par couche-limite (0: deterministe, 1: stochastique)
+iflag_trig_bl=1
+
+          #Surface critique au LCL
+s_trig=1.2e7
+
+          #Temps de decorrelation entre scenes de cumulus
+tau_trig_shallow=1200
+
+          #Temps de decorrelation entre scenes de cumulonimbus
+tau_trig_deep=1200
+
+          # Pour la stabilisation
+random_notrig_max=0.99
+
+          # Temperature a la quelle on fond les descentes glacees
+tmax_fonte_cv=278.15
+
+          #Fermeture par couche-limite (Nicolas Rochetin)
+          #(0: deterministe, 1: statistique, 2: statistique+convergence
+          # grande echelle)
+iflag_clos_bl=1
+
+          #coefficient in Wape->C_star formula: C_star=stark*sqrt(2*Wape),
+          # def: 0.33
+stark=0.33
+
+          #lifting efficiency of wakes; Alp=Alpk*Fip, Fip=power provided
+          # by wakes, def: 0.25
+alpk=0.25
+
+#
+##########################################################
+# Couche limite convective / modele du thermique
+##########################################################
+
+          # Convection seche (D:0, 0:ajustement sec,=>1:modele du thermique) 
+iflag_thermals=18
+
+          # pas de temps du spliting pour les thermiques
+          # TOURNE MAIS POSE PLUS DE PROBLEME QU ELLE N EN RESOUD
+nsplit_thermals=1
+
+          # tau_thermals pour avoir une constante de temps sur les thermiques.
+          # Non valide
+tau_thermals=0.
+
+          # Flag controlant le detrainement et l entrainement
+iflag_thermals_ed=8
+
+          # On va chercher l air a z * ( 1+fact_thermals_ed_dz) pour calculer
+          # le detrainement (A. Jam)
+fact_thermals_ed_dz=0.07
+
+          # Une option de plus sur les thermiques.
+iflag_thermals_optflux=0
+
+          #couplage ou non avec la convection
+iflag_coupl=5 (0:AR4 et 1:nouvelle physique)
+
+          # Seuil pour desactiver les thermiques en cas de forte inversion
+          # en sommet de couche limite. Actif si iflag_thermals impair.
+seuil_inversion=-0.08
+
+          # Reactivation du calcul d un zmax continu pour les thermiques
+          # reactivation d une fermeture humide des thermiques
+          # iflag_thermals_closure=2 (D=1)
+iflag_thermals_closure=2
+
+
+##########################################################
+# Flags wakes
+##########################################################
+
+          #Wake scheme switch (D:0, 0:AR4, 1:New Physics)
+iflag_wake=1
+
+          #multiplicative factor of the damping by gravity waves, def: 4.
+coefgw=4.
+
+          #wake density = number of wake centers per m2, def: 8.E-12
+          #wdens_ref=8.E-12
+wdens_ref_o=1.e-9
+wdens_ref_l=8.e-12
+
+          # Ajustement convectif prealable au calcul des poches
+ok_adjwk=y
+
+
+####################################################################
+#  Conservation 
+####################################################################
+
+          # The source terms of the TKE prognostic equation are diagnosed
+          # from tendencies (du, dv, dT) 
+          # associated with subrgrid scaleamotions and treated as an 
+          # additional heat source.
+          # Controled by a key, iflag_ener_conserv (D=-1):
+          # 0 : no conservation, -1 : old adhoc correction for kinetic E only
+          # (used for CMIP5) 
+          # 1 : conservation, 101 : conversion from kinetic to heat only,
+          # 110 conversion from potential to heat only
+iflag_ener_conserv=10
+
+          #Activation of corrections for water conservation (D: n). 
+          ##The default is n for compatibility with earlier versions.
+          ##generally it should be y.
+ok_conserv_q=y 
+
+fl_cor_ebil=1
+
+####################################################################
+# Ozone
+####################################################################
+          # new treatment for ozone into the tropopause
+adjust_tropopause=y
+
+####################################################################
+#  Conservation de l'eau
+#####################################################################
+          # conservation de l eau sur les calottes
+ok_lic_cond=y
+
Index: CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/physiq.def_NPv6.0.12ttop
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/physiq.def_NPv6.0.12ttop	(revision 3559)
+++ CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/physiq.def_NPv6.0.12ttop	(revision 3559)
@@ -0,0 +1,513 @@
+#
+# $Id: physiq.def_NPv6.0.11 2929 2016-07-26 06:49:39Z jgipsl $
+#
+
+##############################################################
+# PARAMETRES ET CLES DE LA PHYSIQUE LMDZ
+##############################################################
+# D: Valeur par default
+#
+
+###########################################################
+# divers. Devrait aller dans config.def ?
+###########################################################
+##   Si=.T. ,  lecture du fichier limit avec la bonne annee 
+ok_limitvrai=n
+
+###########################################################
+# Parametres couche limite de surface
+###########################################################
+
+          #  ...
+f_cdrag_stable=1.
+
+          # Facteur sur les coefficients de trainee terrestres
+f_cdrag_ter=1.
+
+          # Vitesse minimum dans les calculs de trainee Cd ( || V || + Vmin )
+min_wind_speed=0.1
+
+###########################################################
+# parameter des flux air-mer
+###########################################################
+
+          # Facteur sur les flux sensibles et latent
+          # Introduit pour reduire l evaporation quand on avait z0h=z0m
+          # CONSEILLE : 1
+f_cdrag_oce=1.
+
+          # Flag controlant le calcul des z0
+iflag_z0_oce=1
+
+          # Rapport entre les Z0 latent et sensible
+f_z0qh_oce=1.55
+
+          # Activation des rafales : Oui 1 ou non 0
+iflag_gusts=1
+
+          # facteur pour les rafales des thermiques (bounary layer)
+f_gust_bl=0.845
+
+          # facteur pour les poches (wake)
+f_gust_wk=0.2
+
+          # facteur sur qsat pour tenir compte de la salinite
+f_qsat_oce=0.98
+
+          #cdmmax : valeur max de Cd moment. Sur ocean seulement
+cdmmax=2.5E-3
+
+          #cdhmax : valeur max de Cd evap/sensible. Sur ocean seulement
+cdhmax=2.0E-3
+
+####################################################################
+# Couche limite turbulente
+####################################################################
+
+          # Nouvelle version de Mellor et Yamada
+new_yamada4=y
+
+          # Choix du schema numerique pour new_yamada4=y
+          #  1 schema de MAR. Bien pour CL stables mais detruit les stratocu
+          #  5 schema de MAR modifie. Precaunise.
+yamada4_num=5
+
+          # Flag de controle de la couche limite stable
+iflag_corr_sta=4
+
+          # min sur les fonction de stabilite a la surface
+f_ri_cd_min=0.01
+
+          # max du Ric pour Kz. Decouplage plus grand pour Ric plus grand.
+yamada4_ric=0.18
+
+          # Longueur de melange minimum pour Kz
+lmixmin=0.
+
+          #shema de la couche de surface (D:1, 1:LMD, 8:Mellor-Yamada) 
+iflag_pbl=12
+
+          # Seuils pour la diffusion turbulente
+ksta_ter=1.e-7
+ksta=1.e-10
+
+          #ok_kzmin : calcul Kzmin dans la CL de surface (D: y)
+ok_kzmin=n
+
+          # Creation de TKE par orographie sous-maille
+addtkeoro=0
+alphatkeoro=1.
+smallscales_tkeoro=n
+
+
+####################################################################
+# Ondes de gravite / Orographie sous maille
+####################################################################
+
+          #  Orodr  ou  non   pour l orographie
+ok_orodr=y
+
+          #  Orolf  ou  non   pour l orographie              
+ok_orolf=y
+
+          #Rugoro : inclusion de l orographie sous maille dans le Cd de surface
+          # Obsolete avec l activation des ondes de gravite
+f_rugoro=0.
+
+          # Parametres controlant l effet de l orographie sous maille
+sso_gfrcri=0.70
+sso_gkdrag=0.6
+sso_gkwake=0.4
+sso_gklift=0.1
+
+          # Random gravity waves
+          #Activitate the stochastic parameterization of convective GWs
+          # (should be equal to ok_strato)
+ok_gwd_rando=y
+
+          # Scale the momentum fluxes due to convective GWs
+gwd_rando_ruwmax=0.50
+
+          #Scale the saturated momentum flux of  convective GWs 
+gwd_rando_sat=0.60
+
+          # Important pour controler la periode de la QBO
+gwd_front_ruwmax = 3.00
+
+
+###############################################################
+# Rayonnement
+###############################################################
+          # activation du nouveau code de rayonnement RRTM
+          # 0 : Ancien code et 1 : RRTM (D=0)
+iflag_rrtm=1
+
+          # Nombre de bandes pour le SW. Mettre 2 si iflag_rrtm=0
+NSW=6
+
+    # Albedo et inertie des calottes
+alb_vis_sno_lic=0.96
+alb_nir_sno_lic=0.68
+    # Controle de l'inertie des glaciers et banquises
+    # inertie_sno : pour la neige (y compris sur les points "ter"
+    #      quand orchidee n'est pas actif utilisÃ©)
+    # inertie_lic/sic : pour les "land ice" et "sea ice"
+inertie_sno=350.
+    # iflag_sic=1 pour forcer Ã  garder l'inertie des "sea ice"
+    # a inertie_sic meme si la surface est couverte de neige
+iflag_sic=1
+inertie_lic=2000
+inertie_sic=2000
+
+          # ???
+iflag_albedo=1
+
+          # Frequence appel rayonnement. Nombre appels par jour
+nbapp_cv=48
+
+          # Pour pouvoir revenir a un bug purement informatique de duplication
+          # des constantes thermodynamiques entre LMDZ et RRTM
+          # n : FORTEMENT CONSEILLE
+ok_bad_ecmwf_thermo=n
+
+###############################################################
+# Parametres nuages
+###############################################################
+
+          #seuils de la precipitation des nuages strateformes (D: 2.6e-4 2.6e-4)
+cld_lc_lsc=0.000106
+cld_lc_con=0.000106
+
+          #constante de temps pour eleminer eau lsc et convective
+          # (D: 3600. 3600.)
+cld_tau_lsc=900.
+cld_tau_con=900.
+
+          #facteurs correctifs sur la vitesse de chute des cristaux de glace (D: 1 1)
+ffallv_lsc=0.6
+ffallv_con=0.6
+
+          # coefficient sur la reevaporation de la pluie (D: 2.e-5 n)
+          # regle a 3.e-5 sur des cas de cumulus en 1D
+coef_eva=1.e-4
+
+          # flag pour la reevaporation de la pluie
+          # 0: rien
+          # 1: a l ancienne
+          # 2: prend en compte la surface nuageuse max au dessus pour calculer
+          #    le max de reevaporation, comme ecart a la saturation. CONSEILLE
+iflag_evap_prec=3
+
+          # Modification de la plage de temperature pour la phase mixte
+          # liquide/glace des nuages
+          # Controle par les t_glace_min/max, exposant_glace,
+          # iflag_t_glace (D=0)
+t_glace_min=243.15
+t_glace_max=273.15
+exposant_glace=2.
+iflag_t_glace=2
+
+          # Activation de la thermodynamique de la glace
+iflag_ice_thermo=1
+
+          # normalement elle ne sert plus a rien dans fisrtilp
+          # sinon elle est un peu toxique:
+          # IF (zt(i) .LT. t_coup.and.reevap_ice) zrfln(i)=0. (Jean-Baptiste)
+reevap_ice=n
+
+          #Bergeron
+iflag_bergeron=2
+
+          # temperature dependency of qsat for iterative procedure
+          # temporary flag to switch between the old (CMIP5, D=0)
+          # and new versions (=1) versions 
+iflag_fisrtilp_qsat=4 
+
+          #calcul des proprietes des nuages convectifs (D:1 0.375 1.e-4) 
+iflag_cldcon=6
+fact_cldcon=1.
+
+          # ?????
+facttemps=0.
+
+          #calcul eau condensee et fraction nuageuse a partir des PDF
+          # (D:0, 0:version avec ratqs sinon nouvelles PDFs)  
+iflag_pdf=1
+
+          #calcul epaisseur optique et emmissivite des nuages (D: y 1 0.01 0.3)
+ok_newmicro=y
+
+          # Controle des ratqs grande echelle
+iflag_ratqs=4
+ratqsp0=45000.
+ratqsdp=20000.
+ratqsbas=0.002
+ratqshaut=0.4
+
+          #rayon effectif pour les nuages de glace (D:35)
+rad_froid=35
+
+          #rayons effectifs pour les nuages eau liq (tailles des gouttes
+          # d eau nuageuse, D: 13 9)
+rad_chau1=12
+rad_chau2=11
+
+          #  Choix ou non  de  New oliq               
+new_oliq=y
+
+          # Seuils oliqmax, oicemax (en g/kg).
+          # Au dela on precipite directement au sol
+oliqmax=1.5E-3
+oicemax=1.5E-3
+
+          #Rayons min et max effectifs des particules des nuages
+rei_min=16.
+rei_max=61.29
+
+          # Distribution vetricale sous maille pour le schema de de nuages.
+          # 0: rien
+          # 1: Premiere version A. Jam,
+          # 2 : J. Jouhaud, parametre cloudth_vert_alpha D=0.5
+          # 3 : J. Jouhaud, parametre cloudth_vert_alpha D=0.5/C= 1.32
+          #                           cloudth_vert_alpha_th C=2:91
+iflag_cloudth_vert=3
+cloudth_vert_alpha=0.5
+cloudth_vert_alpha_th=0.5
+
+
+######################################################################
+# Convection 
+######################################################################
+
+          #Convection scheme switch
+          # (D:2, 1:LMD, 2:Tiedtke, 3:KE New Physics, 30:KE AR4)
+iflag_con=3
+
+          #output level of energy conservation diagnostics
+if_ebil=0
+
+          #maximum efficiency of cld water->precipitation conversion (D: 0.993)
+epmax=0.998
+
+          #dry convective adjustment at beginning of Emanuel convective scheme (D: n 0)
+ok_adj_ema=n
+iflag_clw=0
+
+          #Convective closure (D:1, 0:AR4, 2:ALE and ALP)
+iflag_clos=2
+
+          #Convective entrainment mixing law (D:1, 0:AR4=flat PDF, 1=PDF)
+iflag_mix=1
+
+          #weights of the bell shaped and flat PDF (used only if iflag_mix=1) (D: 1 0)
+qqa1=1.
+qqa2=0.
+
+          #Parameters of the bell shaped PDF; Fmax=center (D= 0.65), Gammas=width (D=0.05)
+cvl_corr=1.0
+
+          #Multiplicative factor of Emanuel convective scheme precipitation (D: 1.)
+Fmax=0.65
+          #
+t_top_max=255.
+#
+### Convection
+          #altitude, in hPa, above LCL at which buoybase is computed,
+          # def = original: -40
+dpbase=-40.
+
+          #reference fractional area of precipitating downdraughts,
+          # def = original: 0.01
+sigdz=0.01
+
+          #unsaturated fraction of precipitating downdraughts, def = original: 0.15
+spfac=0.15
+
+          #relaxation time of cloud base mass flux, def = original: 8000
+tau=8000.
+
+          #flag for wb (= vert velocity at LFC);
+          # 0->wb=wbmax, 1->wb=f(plfc) bounded, 2->wb=f(plfc) linear, D=1
+          # Si iflag_wb>=10 : wbeff_min=iflag_wb*0.1
+          # wbmax : assymptotic value 
+flag_wb=20
+wbmax=3.
+
+          # Divers tests
+ok_convstop=.False.
+tau_stop=15000.
+ok_intermittent=.False.
+
+          # nouvel epluchage de C.Rio
+          #shedding coefficient (used when iflag_mix_adiab=1)
+iflag_mix_adiab=0
+coef_peel=0.25
+
+          #Conversion cld water->precip: Ep=f(pressure) if 0; Ep=f(temperature)
+          #if 1, def=1
+flag_epKEorig=1
+
+          # Case : flag_epKEorig=1
+          # elcrit : max condensed water concentration in kg/kg, D=0.0003,
+          # tlcrit : temperature in degre Celsius, at which Ep=Epmax, D=-55. (original)
+          # original: 0.0011, used only if flag_epKEorig=1
+elcrit=0.00025
+tlcrit=-40.
+
+          # Case : flag_epKEorig=0
+          # pbcrit : pressure (hPa), above LCL below which Ep=0, D=150 (original)
+          # ptcrit : pressure (hPa), above LCL above which Ep=Epmax, D=500 (original)
+pbcrit=150.0
+ptcrit=500.0
+
+          # Prevent some crashes
+          # Filter out bad wakes
+iflag_wk_check_trgl=2
+
+          # Check whether parcel level temperature and specific humidity
+          # are reasonable and demand that LCL be high enough
+cv_flag_feed=2
+
+          # save 20% CPU 
+ok_optim_yield=y
+
+
+##########################################################
+# Fermeture convective et couplages
+##########################################################
+
+          # Appel separe des thermiques 
+iflag_pbl_split=0
+
+          #rendement sur la puissance fournie par les thermiques a la convection
+alp_bl_k=0.5
+
+          #Constant value to be added to Alp (D: 0.)
+alp_offset=0.
+
+          ### nrlmd le 10/04/2012: Declenchement ###
+          #Declenchement par couche-limite (0: deterministe, 1: stochastique)
+iflag_trig_bl=1
+
+          #Surface critique au LCL
+s_trig=1.2e7
+
+          #Temps de decorrelation entre scenes de cumulus
+tau_trig_shallow=1200
+
+          #Temps de decorrelation entre scenes de cumulonimbus
+tau_trig_deep=1200
+
+          # Pour la stabilisation
+random_notrig_max=0.99
+
+          # Temperature a la quelle on fond les descentes glacees
+tmax_fonte_cv=278.15
+
+          #Fermeture par couche-limite (Nicolas Rochetin)
+          #(0: deterministe, 1: statistique, 2: statistique+convergence
+          # grande echelle)
+iflag_clos_bl=1
+
+          #coefficient in Wape->C_star formula: C_star=stark*sqrt(2*Wape),
+          # def: 0.33
+stark=0.33
+
+          #lifting efficiency of wakes; Alp=Alpk*Fip, Fip=power provided
+          # by wakes, def: 0.25
+alpk=0.25
+
+#
+##########################################################
+# Couche limite convective / modele du thermique
+##########################################################
+
+          # Convection seche (D:0, 0:ajustement sec,=>1:modele du thermique) 
+iflag_thermals=18
+
+          # pas de temps du spliting pour les thermiques
+          # TOURNE MAIS POSE PLUS DE PROBLEME QU ELLE N EN RESOUD
+nsplit_thermals=1
+
+          # tau_thermals pour avoir une constante de temps sur les thermiques.
+          # Non valide
+tau_thermals=0.
+
+          # Flag controlant le detrainement et l entrainement
+iflag_thermals_ed=8
+
+          # On va chercher l air a z * ( 1+fact_thermals_ed_dz) pour calculer
+          # le detrainement (A. Jam)
+fact_thermals_ed_dz=0.07
+
+          # Une option de plus sur les thermiques.
+iflag_thermals_optflux=0
+
+          #couplage ou non avec la convection
+iflag_coupl=5 (0:AR4 et 1:nouvelle physique)
+
+          # Seuil pour desactiver les thermiques en cas de forte inversion
+          # en sommet de couche limite. Actif si iflag_thermals impair.
+seuil_inversion=-0.08
+
+          # Reactivation du calcul d un zmax continu pour les thermiques
+          # reactivation d une fermeture humide des thermiques
+          # iflag_thermals_closure=2 (D=1)
+iflag_thermals_closure=2
+
+
+##########################################################
+# Flags wakes
+##########################################################
+
+          #Wake scheme switch (D:0, 0:AR4, 1:New Physics)
+iflag_wake=1
+
+          #multiplicative factor of the damping by gravity waves, def: 4.
+coefgw=4.
+
+          #wake density = number of wake centers per m2, def: 8.E-12
+          #wdens_ref=8.E-12
+wdens_ref_o=1.e-9
+wdens_ref_l=8.e-12
+
+          # Ajustement convectif prealable au calcul des poches
+ok_adjwk=y
+
+
+####################################################################
+#  Conservation 
+####################################################################
+
+          # The source terms of the TKE prognostic equation are diagnosed
+          # from tendencies (du, dv, dT) 
+          # associated with subrgrid scaleamotions and treated as an 
+          # additional heat source.
+          # Controled by a key, iflag_ener_conserv (D=-1):
+          # 0 : no conservation, -1 : old adhoc correction for kinetic E only
+          # (used for CMIP5) 
+          # 1 : conservation, 101 : conversion from kinetic to heat only,
+          # 110 conversion from potential to heat only
+iflag_ener_conserv=10
+
+          #Activation of corrections for water conservation (D: n). 
+          ##The default is n for compatibility with earlier versions.
+          ##generally it should be y.
+ok_conserv_q=y 
+
+fl_cor_ebil=1
+
+####################################################################
+# Ozone
+####################################################################
+          # new treatment for ozone into the tropopause
+adjust_tropopause=y
+
+####################################################################
+#  Conservation de l'eau
+#####################################################################
+          # conservation de l eau sur les calottes
+ok_lic_cond=y
+
+
+
Index: CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/physiq.def_NPv6.0.7
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/physiq.def_NPv6.0.7	(revision 3559)
+++ CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/physiq.def_NPv6.0.7	(revision 3559)
@@ -0,0 +1,256 @@
+#
+# $Id: physiq.def_NPv5.80a 2925 2016-07-22 13:33:42Z lfairhead $
+#
+##############################################################################
+# PARAMETRES ET CLES DE LA PHYSIQUE LMDZ
+##############################################################################
+# D: Valeur par default
+#
+#Parametres Orographiques et cdrags
+#**********************************
+##   Si=.T. ,  lecture du fichier limit avec la bonne annee 
+ok_limitvrai=n
+iflag_albedo=1
+#Cdrags 
+f_cdrag_stable=1.
+f_cdrag_ter=1.
+
+# parameter for z0
+f_cdrag_oce=1
+iflag_z0_oce=1
+f_z0qh_oce=1.55
+min_wind_speed=0.1
+
+f_ri_cd_min=0.1
+#cdmmax
+cdmmax=2.5E-3
+#cdhmax
+cdhmax=2.0E-3
+##  Orodr  ou  non   pour l orographie
+ok_orodr=y
+##  Orolf  ou  non   pour l orographie              
+ok_orolf=y
+#Rugoro
+f_rugoro=0.
+#
+### Random gravity waves
+#Activitate the stochastic parameterization of convective GWs (should be equal to ok_strato)
+ok_gwd_rando=y
+# Scale the momentum fluxes due to convective GWs
+gwd_rando_ruwmax=0.23
+#Scale the saturated momentum flux of  convective GWs 
+gwd_rando_sat=0.60
+gwd_front_ruwmax=4.00
+
+sso_gkdrag=0.2
+sso_gfrcri=0.70
+sso_gkwake=0.40
+#
+# Rayonnement
+#*********************
+# activation du nouveau code de rayonnement RRTM
+# 0 : Ancien code et 1 : RRTM (D=0)
+iflag_rrtm=1
+NSW=6
+#
+# Parametres nuages
+#******************
+#seuils de la precipitation des nuages strateformes (D: 2.6e-4 2.6e-4)
+cld_lc_lsc=0.00028
+cld_lc_con=0.00028
+#constante de temps pour eleminer eau lsc et convective (D: 3600. 3600.)
+cld_tau_lsc=900.
+cld_tau_con=900.
+#facteurs correctifs sur la vitesse de chute des cristaux de glace (D: 1 1)
+ffallv_lsc=0.5
+ffallv_con=0.5
+#coefficient sur la reevaporation de la pluie (D: 2.e-5 n)
+coef_eva=2e-4
+reevap_ice=y
+#calcul des proprietes des nuages convectifs (D:1 0.375 1.e-4) 
+iflag_cldcon=6
+fact_cldcon=1.
+facttemps=0.
+#calcul eau condensee et fraction nuageuse a partir des PDF (D:0, 0:version avec ratqs sinon nouvelles PDFs)  
+iflag_pdf=1
+#calcul epaisseur optique et emmissivite des nuages (D: y 1 0.01 0.3)
+ok_newmicro=y
+iflag_ratqs=4
+ratqsp0=37000.
+ratqsdp=20000.
+ratqsbas=0.002
+ratqshaut=0.4
+#rayon effectif pour les nuages de glace (D:35)
+rad_froid=35
+#rayons effectifs pour les nuages eau liq (tailles des gouttes d eau nuageuse, D: 13 9)
+rad_chau1=12
+rad_chau2=11
+##  Choix ou non  de  New oliq               
+new_oliq=y
+# Seuils oliqmax, oicemax
+oliqmax=1.5E-3
+oicemax=1.5E-3
+#Rayons min et max effectifs des particules des nuages
+rei_min=16.
+rei_max=61.29
+#
+# Flags Convection 
+#*****************
+#Convection scheme switch (D:2, 1:LMD, 2:Tiedtke, 3:KE New Physics, 30:KE AR4)
+iflag_con=3
+#output level of energy conservation diagnostics
+if_ebil=0
+#maximum efficiency of cld water->precipitation conversion (D: 0.993)
+epmax=0.999
+#dry convective adjustment at beginning of Emanuel convective scheme (D: n 0)
+ok_adj_ema=n
+iflag_clw=0
+#Convective closure (D:1, 0:AR4, 2:ALE and ALP)
+iflag_clos=2
+#Convective entrainment mixing law (D:1, 0:AR4=flat PDF, 1=PDF)
+iflag_mix=1
+#weights of the bell shaped and flat PDF (used only if iflag_mix=1) (D: 1 0)
+qqa1=1.
+qqa2=0.
+#Parameters of the bell shaped PDF; Fmax=center (D= 0.65), Gammas=width (D=0.05)
+cvl_corr=1.0
+#Multiplicative factor of Emanuel convective scheme precipitation (D: 1.)
+Fmax=0.65
+#
+# Flags Couche limite
+#********************
+#shema de CL des thermiques (D:0, 0:ajustement sec,=>1:versions thermiques) 
+iflag_thermals=18
+#pas de temps du spliting pour les thermiques
+nsplit_thermals=1
+tau_thermals=0.
+iflag_thermals_ed=8
+fact_thermals_ed_dz=0.1
+iflag_thermals_optflux=0
+#shema de la couche de surface (D:1, 1:LMD, 8:Mellor-Yamada) 
+iflag_pbl=11
+#diffusion turbulente
+ksta_ter=1.e-7
+ksta=1.e-10
+#ok_kzmin : calcul Kzmin dans la CL de surface
+ok_kzmin=y
+#couplage ou non avec la convection
+iflag_coupl=5 (0:AR4 et 1:nouvelle physique)
+seuil_inversion=-0.08
+#rendement sur la puissance fournie par les thermiques a la convection
+alp_bl_k=0.5
+#
+## temperature dependency of qsat for iterative procedure
+## temporary flag to switch between the old (CMIP5, D=0) and new versions (=1) versions 
+iflag_fisrtilp_qsat=4 
+## Reactivation du calcul d'un zmax continu pour les thermiques
+## reactivation d'une fermeture humide des thermiques  iflag_thermals_closure=2 (D=1)
+iflag_thermals_closure=1
+#
+# Flags wakes
+#************
+#Wake scheme switch (D:0, 0:AR4, 1:New Physics)
+iflag_wake=1
+#Constant value to be added to Alp (D: 0.)
+alp_offset=0.
+
+### nrlmd le 10/04/2012: Declenchement ###
+#Declenchement par couche-limite (0: deterministe, 1: stochastique)
+iflag_trig_bl=1
+#Surface critique au LCL
+s_trig=1.2e7
+#Temps de decorrelation entre scenes de cumulus
+tau_trig_shallow=1200
+#Temps de decorrelation entre scenes de cumulonimbus
+tau_trig_deep=1200
+# Pour la stabilisation
+random_notrig_max=0.99
+ok_adjwk=y
+tmax_fonte_cv=278.15
+
+
+### nrlmd le 10/04/2012: Fermeture ###
+#Fermeture par couche-limite (0: deterministe, 1: statistique, 2: statistique+convergence grande echelle)
+iflag_clos_bl=1
+### fin nrlmd le 10/04/2012
+
+## Modification de la plage de temperature pour la phase mixte liquide/glace des nuages
+## Controle par les t_glace_min/max, exposant_glace, iflag_t_glace (D=0)
+t_glace_min=233.13
+t_glace_max=273.13
+exposant_glace=1.
+iflag_t_glace=2
+iflag_ice_thermo=1
+
+#
+## The source terms of the TKE prognostic equation are diagnosed from tendencies (du, dv, dT) 
+## associated with subrgrid scaleamotions and treated as an additional heat source.
+## Controled by a key, iflag_ener_conserv (D=-1):
+## 0 : no conservation, -1 : old adhoc correction for kinetic E only (used for CMIP5) 
+## 1 : conservation, 101 : conversion from kinetic to heat only, 110 conversion from potential to heat only
+iflag_ener_conserv=1
+
+#Activation of corrections for water conservation (D: n). 
+##The default is n for compatibility with earlier versions.
+##generally it should be y.
+ok_conserv_q=y 
+
+iflag_cloudth_vert=3
+
+#
+lmixmin=10.
+#pbl_lmixmin_alpha=0.05
+
+#Bergeron
+iflag_bergeron=1
+
+
+### Convection
+#altitude, in hPa, above LCL at which buoybase is computed, def = original: -40
+dpbase=-40.
+#altitude, in hPa, above LCL below which Ep=0, def = original: 150, used only if flag_epKEorig=0
+pbcrit=150.0
+#altitude, in hPa, above LCL above which Ep=Epmax, def = original: 500, used only if flag_epKEorig=0
+ptcrit=500.0
+#reference fractional area of precipitating downdraughts, def = original: 0.01
+sigdz=0.01
+#unsaturated fraction of precipitating downdraughts, def = original: 0.15
+spfac=0.15
+#relaxation time of cloud base mass flux, def = original: 8000
+tau=8000.
+#flag for wb (= vert velocity at LFC); 0->wb=wbmax, 1->wb=f(plfc) bounded, 2->wb=f(plfc) linear, def = 1
+flag_wb=1
+#parameter used in the computation of wb, def = 6.
+wbmax=6.
+#
+ok_convstop=.False.
+#
+tau_stop=15000.
+#
+ok_intermittent=.False.
+#shedding coefficient (used when iflag_mix_adiab=1)
+coef_peel=0.25
+#
+### Clouds
+#Conversion cld water->precip: Ep=f(pressure) if 0; Ep=f(temperature) if 1, def=1
+flag_epKEorig=1
+#max condensed water concentration in kg/kg, def=0.0003, original: 0.0011, used only if flag_epKEorig=1
+elcrit=0.00025
+#temperature in degre Celsius, at which Ep=Epmax, def=-55., original: -55, used only if flag_epKEorig=1
+tlcrit=-40.
+
+### Wakes
+#coefficient in Wape->C_star formula: C_star=stark*sqrt(2*Wape), def: 0.33
+stark=0.33
+#lifting efficiency of wakes; Alp=Alpk*Fip, Fip=power provided by wakes, def: 0.25
+alpk=0.25
+#wake density = number of wake centers per m2, def: 8.E-12
+wdens_ref=8.E-12
+#multiplicative factor of the damping by gravity waves, def: 4.
+coefgw=4.
+#
+### Les parametres suivants viennent du config.def
+# constante solaire lue dans un fichier par defaut
+ok_suntime_rrtm=y
+# Aerosols stratospheriques utilises par defaut
+flag_aerosol_strat=2
Index: CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/physiq.def_NPv6.0.8
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/physiq.def_NPv6.0.8	(revision 3559)
+++ CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/physiq.def_NPv6.0.8	(revision 3559)
@@ -0,0 +1,264 @@
+#
+# $Id: physiq.def_NPv6.0.8 3131 2017-02-14 15:11:12Z jgipsl $
+#
+##############################################################################
+# PARAMETRES ET CLES DE LA PHYSIQUE LMDZ
+##############################################################################
+# D: Valeur par default
+#
+#Parametres Orographiques et cdrags
+#**********************************
+##   Si=.T. ,  lecture du fichier limit avec la bonne annee 
+ok_limitvrai=n
+iflag_albedo=1
+#Cdrags 
+f_cdrag_stable=1.
+f_cdrag_ter=1.
+
+#parameter for Z0
+f_cdrag_oce=1.
+iflag_z0_oce=1
+f_z0qh_oce=1.55
+min_wind_speed=0.1
+
+f_ri_cd_min=0.1
+#cdmmax
+cdmmax=2.5E-3
+#cdhmax
+cdhmax=2.0E-3
+##  Orodr  ou  non   pour l orographie
+ok_orodr=y
+##  Orolf  ou  non   pour l orographie              
+ok_orolf=y
+#Rugoro
+f_rugoro=0.
+#
+### Random gravity waves
+#Activitate the stochastic parameterization of convective GWs (should be equal to ok_strato)
+ok_gwd_rando=y
+# Scale the momentum fluxes due to convective GWs
+gwd_rando_ruwmax=0.23
+#Scale the saturated momentum flux of  convective GWs 
+gwd_rando_sat=0.60
+#
+gwd_front_ruwmax = 4.00
+
+sso_gkdrag=0.2
+sso_gfrcri=0.70
+sso_gkwake=0.40
+#
+# Rayonnement
+#*********************
+# activation du nouveau code de rayonnement RRTM
+# 0 : Ancien code et 1 : RRTM (D=0)
+iflag_rrtm=1
+NSW=6
+#
+# Parametres nuages
+#******************
+#seuils de la precipitation des nuages strateformes (D: 2.6e-4 2.6e-4)
+cld_lc_lsc=0.00015
+cld_lc_con=0.00015
+#constante de temps pour eleminer eau lsc et convective (D: 3600. 3600.)
+cld_tau_lsc=900.
+cld_tau_con=900.
+#facteurs correctifs sur la vitesse de chute des cristaux de glace (D: 1 1)
+ffallv_lsc=1.
+ffallv_con=1.
+#coefficient sur la reevaporation de la pluie (D: 2.e-5 n)
+coef_eva=2e-4
+reevap_ice=y
+#calcul des proprietes des nuages convectifs (D:1 0.375 1.e-4) 
+iflag_cldcon=6
+fact_cldcon=1.
+facttemps=0.
+#calcul eau condensee et fraction nuageuse a partir des PDF (D:0, 0:version avec ratqs sinon nouvelles PDFs)  
+iflag_pdf=1
+#calcul epaisseur optique et emmissivite des nuages (D: y 1 0.01 0.3)
+ok_newmicro=y
+iflag_ratqs=4
+ratqsp0=37000.
+ratqsdp=20000.
+ratqsbas=0.002
+ratqshaut=0.4
+#rayon effectif pour les nuages de glace (D:35)
+rad_froid=35
+#rayons effectifs pour les nuages eau liq (tailles des gouttes d eau nuageuse, D: 13 9)
+rad_chau1=12
+rad_chau2=11
+##  Choix ou non  de  New oliq               
+new_oliq=y
+# Seuils oliqmax, oicemax
+oliqmax=1.5E-3
+oicemax=1.5E-3
+#Rayons min et max effectifs des particules des nuages
+rei_min=16.
+rei_max=61.29
+#
+# Flags Convection 
+#*****************
+#Convection scheme switch (D:2, 1:LMD, 2:Tiedtke, 3:KE New Physics, 30:KE AR4)
+iflag_con=3
+#output level of energy conservation diagnostics
+if_ebil=0
+#maximum efficiency of cld water->precipitation conversion (D: 0.993)
+epmax=0.997
+#dry convective adjustment at beginning of Emanuel convective scheme (D: n 0)
+ok_adj_ema=n
+iflag_clw=0
+#Convective closure (D:1, 0:AR4, 2:ALE and ALP)
+iflag_clos=2
+#Convective entrainment mixing law (D:1, 0:AR4=flat PDF, 1=PDF)
+iflag_mix=1
+#weights of the bell shaped and flat PDF (used only if iflag_mix=1) (D: 1 0)
+qqa1=1.
+qqa2=0.
+#Parameters of the bell shaped PDF; Fmax=center (D= 0.65), Gammas=width (D=0.05)
+cvl_corr=1.0
+#Multiplicative factor of Emanuel convective scheme precipitation (D: 1.)
+Fmax=0.65
+#
+###t_top_max=275.
+#
+# Flags Couche limite
+#********************
+#shema de CL des thermiques (D:0, 0:ajustement sec,=>1:versions thermiques) 
+iflag_thermals=18
+#pas de temps du spliting pour les thermiques
+nsplit_thermals=1
+tau_thermals=0.
+iflag_thermals_ed=8
+fact_thermals_ed_dz=0.1
+iflag_thermals_optflux=0
+#shema de la couche de surface (D:1, 1:LMD, 8:Mellor-Yamada) 
+iflag_pbl=11
+#diffusion turbulente
+ksta_ter=1.e-7
+ksta=1.e-10
+#ok_kzmin : calcul Kzmin dans la CL de surface
+ok_kzmin=y
+#couplage ou non avec la convection
+iflag_coupl=5 (0:AR4 et 1:nouvelle physique)
+seuil_inversion=-0.08
+#rendement sur la puissance fournie par les thermiques a la convection
+alp_bl_k=0.5
+#
+## temperature dependency of qsat for iterative procedure
+## temporary flag to switch between the old (CMIP5, D=0) and new versions (=1) versions 
+iflag_fisrtilp_qsat=4 
+## Reactivation du calcul d'un zmax continu pour les thermiques
+## reactivation d'une fermeture humide des thermiques  iflag_thermals_closure=2 (D=1)
+iflag_thermals_closure=1
+#
+# Flags wakes
+#************
+#Wake scheme switch (D:0, 0:AR4, 1:New Physics)
+iflag_wake=1
+#Constant value to be added to Alp (D: 0.)
+alp_offset=0.
+
+### nrlmd le 10/04/2012: Declenchement ###
+#Declenchement par couche-limite (0: deterministe, 1: stochastique)
+iflag_trig_bl=1
+#Surface critique au LCL
+s_trig=1.2e7
+#Temps de decorrelation entre scenes de cumulus
+tau_trig_shallow=1200
+#Temps de decorrelation entre scenes de cumulonimbus
+tau_trig_deep=1200
+# Pour la stabilisation
+random_notrig_max=0.99
+ok_adjwk=y
+tmax_fonte_cv=278.15
+#
+flag_wk_check_trgl=y
+#
+cv_flag_feed=2
+
+### nrlmd le 10/04/2012: Fermeture ###
+#Fermeture par couche-limite (0: deterministe, 1: statistique, 2: statistique+convergence grande echelle)
+iflag_clos_bl=1
+### fin nrlmd le 10/04/2012
+
+## Modification de la plage de temperature pour la phase mixte liquide/glace des nuages
+## Controle par les t_glace_min/max, exposant_glace, iflag_t_glace (D=0)
+t_glace_min=243.15
+t_glace_max=273.15
+exposant_glace=2.
+iflag_t_glace=2
+iflag_ice_thermo=1
+
+#
+## The source terms of the TKE prognostic equation are diagnosed from tendencies (du, dv, dT) 
+## associated with subrgrid scaleamotions and treated as an additional heat source.
+## Controled by a key, iflag_ener_conserv (D=-1):
+## 0 : no conservation, -1 : old adhoc correction for kinetic E only (used for CMIP5) 
+## 1 : conservation, 101 : conversion from kinetic to heat only, 110 conversion from potential to heat only
+iflag_ener_conserv=1
+
+#Activation of corrections for water conservation (D: n). 
+##The default is n for compatibility with earlier versions.
+##generally it should be y.
+ok_conserv_q=y 
+
+iflag_cloudth_vert=3
+
+#
+lmixmin=10.
+#pbl_lmixmin_alpha=0.05
+
+#Bergeron
+iflag_bergeron=1
+
+
+### Convection
+#altitude, in hPa, above LCL at which buoybase is computed, def = original: -40
+dpbase=-40.
+#altitude, in hPa, above LCL below which Ep=0, def = original: 150, used only if flag_epKEorig=0
+pbcrit=150.0
+#altitude, in hPa, above LCL above which Ep=Epmax, def = original: 500, used only if flag_epKEorig=0
+ptcrit=500.0
+#reference fractional area of precipitating downdraughts, def = original: 0.01
+sigdz=0.01
+#unsaturated fraction of precipitating downdraughts, def = original: 0.15
+spfac=0.15
+#relaxation time of cloud base mass flux, def = original: 8000
+tau=8000.
+#flag for wb (= vert velocity at LFC); 0->wb=wbmax, 1->wb=f(plfc) bounded, 2->wb=f(plfc) linear, def = 1
+flag_wb=1
+#parameter used in the computation of wb, def = 6.
+wbmax=6.
+#
+ok_convstop=.False.
+#
+tau_stop=15000.
+#
+ok_intermittent=.False.
+#shedding coefficient (used when iflag_mix_adiab=1)
+coef_peel=0.25
+#
+### Clouds
+#Conversion cld water->precip: Ep=f(pressure) if 0; Ep=f(temperature) if 1, def=1
+flag_epKEorig=1
+#max condensed water concentration in kg/kg, def=0.0003, original: 0.0011, used only if flag_epKEorig=1
+elcrit=0.00025
+#temperature in degre Celsius, at which Ep=Epmax, def=-55., original: -55, used only if flag_epKEorig=1
+tlcrit=-40.
+
+### Wakes
+#coefficient in Wape->C_star formula: C_star=stark*sqrt(2*Wape), def: 0.33
+stark=0.33
+#lifting efficiency of wakes; Alp=Alpk*Fip, Fip=power provided by wakes, def: 0.25
+alpk=0.25
+#wake density = number of wake centers per m2, def: 8.E-12
+#wdens_ref=8.E-12
+wdens_ref_o=8.e-12
+wdens_ref_l=8.e-12
+#
+#multiplicative factor of the damping by gravity waves, def: 4.
+coefgw=4.
+#
+alb_vis_sno_lic=0.96
+alb_nir_sno_lic=0.68
+inertie_sno=350.
+
Index: CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/reprobus.def
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/reprobus.def	(revision 3559)
+++ CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/reprobus.def	(revision 3559)
@@ -0,0 +1,35 @@
+#######################################################################
+# parametres pour REPROBUS
+#######################################################################
+## activation des forcages tropo 2D
+ok_Rtime2D=y
+
+## ozone interactif
+ok_o3interact = y
+
+##
+ok_suntime=y
+
+## OUTPUT AUTRE QUE TRACEURS: NAS: nonadvected species ou/et J-Rate Flux 
+##                                 ou/et R-Rate Flux
+ok_outputnas=y
+##
+ok_outputjflux=y
+##
+ok_outputrflux=y
+##
+ok_outputcolo3=y
+##
+ok_outputsurfaceaero=y
+##
+ok_outputparth=y
+#
+ok_outputptrop=y
+##
+ok_outputttrop=y
+##
+ok_outputztrop=y
+
+## ajout de 3 traceurs age de l'air SPARC
+ok_aga=y
+
Index: CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/run.def
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/run.def	(revision 3559)
+++ CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/run.def	(revision 3559)
@@ -0,0 +1,55 @@
+# $Id$
+#
+INCLUDEDEF=physiq.def
+INCLUDEDEF=gcm.def
+INCLUDEDEF=vert.def
+INCLUDEDEF=orchidee.def
+INCLUDEDEF=config.def
+INCLUDEDEF=reprobus.def
+INCLUDEDEF=guide.def
+INCLUDEDEF=inca.def
+## Type de calendrier utilise
+## valeur possible: earth_360d (defaut), earth_365d, earth_366d
+calend= _AUTOBLOCKER_
+## Jour de l etat initial ( = 350  si 20 Decembre ,par expl. ,comme ici )
+dayref= _AUTOBLOCKER_
+##  Annee de l etat  initial (   avec  4  chiffres   )
+anneeref= _AUTOBLOCKER_
+## Nombre de jours d integration
+nday= _AUTOBLOCKER_
+## Remise a zero de la date initiale
+raz_date= _AUTOBLOCKER_
+## periode de sortie des variables de controle (en pas)
+iconser=240
+## periode d ecriture du fichier histoire (en jour)
+iecri=1
+## flag de sortie dynzon
+ok_dynzon=n
+## activation du calcul d equilibrage de charge
+adjust= n
+## activation du filtre fft
+use_filtre_fft=y
+## niveau d impression de controle
+prt_level=0
+###
+### Informations sur la configuration utilisee
+###
+### type_ocean = force / slab  /couple
+### type_ocean is modified automatically by the lmdz.driver 
+type_ocean=_AUTOBLOCKER_
+### version_ocean = nemo / opa8
+version_ocean=nemo
+### activation passage courants surface ocean-glace
+cpl_current=y
+### VEGET= y si ORCHIDEE, =n si bucket
+### VEGET is modified automatically by the lmdz.driver 
+VEGET=_AUTOBLOCKER_
+### Choice of tracers type_trac=lmdz/inca/repr
+### type_trac is set automatically by the lmdz.driver
+type_trac=_AUTOBLOCKER_
+### config_inca=aero/chem needed only if type_trac=inca
+config_inca=_AUTOBLOCKER_ 
+### To activate XIOS ouputs only, set n to use IOIPSL
+ok_all_xml= y
+
+
Index: CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/traceur.def
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/traceur.def	(revision 3559)
+++ CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/traceur.def	(revision 3559)
@@ -0,0 +1,5 @@
+4
+14 14 H2Ov
+10 10 H2Ol
+10 10 H2Oi
+10 10 Aga
Index: CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/traceur.def.inca_repr
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/traceur.def.inca_repr	(revision 3559)
+++ CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/traceur.def.inca_repr	(revision 3559)
@@ -0,0 +1,53 @@
+2
+48
+14 14 H2Ov
+10 10 H2Ol
+10 10 N2O
+10 10 CH4
+10 10 H2Orep
+10 10 NOy
+10 10 HNO3
+10 10 N2O5
+10 10 Clx
+10 10 OX
+10 10 CO
+10 10 OClO
+10 10 O3I
+10 10 H2SO4
+10 10 HCl
+10 10 ClONO2
+10 10 HOCl
+10 10 Cl2
+10 10 H2O2
+10 10 ClNO2
+10 10 HBr
+10 10 BrONO2
+10 10 NOx
+10 10 HO2NO2
+10 10 ClOx
+10 10 BrOx
+10 10 Cl2O2
+10 10 HOBr
+10 10 BrCl
+10 10 CH2O
+10 10 CH3O2
+10 10 CH3O2H
+10 10 CFC11
+10 10 CFC12
+10 10 CFC113
+10 10 CCl4
+10 10 MCF
+10 10 CH3Cl
+10 10 HCFC22
+10 10 CH3Br
+10 10 Ha1211
+10 10 Ha1301
+10 10 Bry
+10 10 CH2Br2
+10 10 HNO3_g
+10 10 Plume
+10 10 AgeAire
+10 10 PulseAA
+10 10 LineaAA
+10 10 IdealAA
+
Index: CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/traceur.def.repr
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/traceur.def.repr	(revision 3559)
+++ CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/traceur.def.repr	(revision 3559)
@@ -0,0 +1,51 @@
+50
+14 14 H2Ov
+10 10 H2Ol
+10 10 N2O
+10 10 CH4
+10 10 H2Orep
+10 10 NOy
+10 10 HNO3
+10 10 N2O5
+10 10 Clx
+10 10 OX
+10 10 CO
+10 10 OClO
+10 10 O3I
+10 10 H2SO4
+10 10 HCl
+10 10 ClONO2
+10 10 HOCl
+10 10 Cl2
+10 10 H2O2
+10 10 ClNO2
+10 10 HBr
+10 10 BrONO2
+10 10 NOx
+10 10 HO2NO2
+10 10 ClOx
+10 10 BrOx
+10 10 Cl2O2
+10 10 HOBr
+10 10 BrCl
+10 10 CH2O
+10 10 CH3O2
+10 10 CH3O2H
+10 10 CFC11
+10 10 CFC12
+10 10 CFC113
+10 10 CCl4
+10 10 MCF
+10 10 CH3Cl
+10 10 HCFC22
+10 10 CH3Br
+10 10 Ha1211
+10 10 Ha1301
+10 10 Bry
+10 10 CH2Br2
+10 10 HNO3_g
+10 10 Plume
+10 10 AgeAire
+10 10 PulseAA
+10 10 LineaAA
+10 10 IdealAA
Index: CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/traceur.def_h2o_AP
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/traceur.def_h2o_AP	(revision 3559)
+++ CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/traceur.def_h2o_AP	(revision 3559)
@@ -0,0 +1,4 @@
+2
+10 10 H2Ov
+10 10 H2Ol
+
Index: CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/traceur.def_h2o_NPv5.4
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/traceur.def_h2o_NPv5.4	(revision 3559)
+++ CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/traceur.def_h2o_NPv5.4	(revision 3559)
@@ -0,0 +1,4 @@
+3
+14 14 H2Ov
+10 10 H2Ol
+10 10 H2Oi
Index: CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/traceur.def_h2o_NPv5.80bz0
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/traceur.def_h2o_NPv5.80bz0	(revision 3559)
+++ CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/traceur.def_h2o_NPv5.80bz0	(revision 3559)
@@ -0,0 +1,4 @@
+3
+14 14 H2Ov
+10 10 H2Ol
+10 10 H2Oi
Index: CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/traceur.def_h2o_NPv6.0.10
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/traceur.def_h2o_NPv6.0.10	(revision 3559)
+++ CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/traceur.def_h2o_NPv6.0.10	(revision 3559)
@@ -0,0 +1,1 @@
+link traceur.def_h2o_NPv5.4
Index: CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/traceur.def_h2o_NPv6.0.11
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/traceur.def_h2o_NPv6.0.11	(revision 3559)
+++ CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/traceur.def_h2o_NPv6.0.11	(revision 3559)
@@ -0,0 +1,1 @@
+link traceur.def_h2o_NPv5.4
Index: CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/traceur.def_h2o_NPv6.0.12
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/traceur.def_h2o_NPv6.0.12	(revision 3559)
+++ CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/traceur.def_h2o_NPv6.0.12	(revision 3559)
@@ -0,0 +1,1 @@
+link traceur.def_h2o_NPv6.0.11
Index: CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/traceur.def_h2o_NPv6.0.12ttop
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/traceur.def_h2o_NPv6.0.12ttop	(revision 3559)
+++ CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/traceur.def_h2o_NPv6.0.12ttop	(revision 3559)
@@ -0,0 +1,4 @@
+3
+14 14 H2Ov
+10 10 H2Ol
+10 10 H2Oi
Index: CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/traceur.def_h2o_NPv6.0.7
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/traceur.def_h2o_NPv6.0.7	(revision 3559)
+++ CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/traceur.def_h2o_NPv6.0.7	(revision 3559)
@@ -0,0 +1,1 @@
+link traceur.def_h2o_NPv5.4
Index: CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/traceur.def_h2o_NPv6.0.8
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/traceur.def_h2o_NPv6.0.8	(revision 3559)
+++ CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/traceur.def_h2o_NPv6.0.8	(revision 3559)
@@ -0,0 +1,1 @@
+link traceur.def_h2o_NPv5.4
Index: CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/vert.def_L39
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/vert.def_L39	(revision 3559)
+++ CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/vert.def_L39	(revision 3559)
@@ -0,0 +1,9 @@
+## Avec ou sans strato
+ok_strato=y 
+## Activation ou non de la parametrisation de Hines pour la strato
+ok_hines=y
+#  Couche eponge dans les couches de pression plus faible que 100 fois la pression de la derniere couche
+iflag_top_bound=2
+#  Coefficient pour la couche eponge (valeur derniere couche)
+tau_top_bound=5.e-5
+
Index: CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/vert.def_L79
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/vert.def_L79	(revision 3559)
+++ CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/PARAM/vert.def_L79	(revision 3559)
@@ -0,0 +1,41 @@
+#
+# $Id: vert_L79.def 2446 2016-02-16 12:32:59Z fairhead $
+#
+#### Verticale discretisation
+## Modified verticale discretisation for stratospheric versions.
+## The new version can be controled by following parameters
+## Al the parameters are given in km assuming a given scalehigh
+vert_sampling=strato_custom
+## scale hight
+vert_scale=7.
+## width of first layer
+vert_dzmin=0.017
+## dz in the low atmosphere
+vert_dzlow=1.
+## height at which resolution recches dzlow
+vert_z0low=8.7
+## dz in the mid atmsophere
+vert_dzmid=2.
+## height at which resolution recches dzmid
+vert_z0mid=70.
+## width of the transition
+vert_h_mid=20.
+## dz in the high atmsophere
+vert_dzhig=11.
+## height at which resolution recches dz
+vert_z0hig=75.
+## width of the transition
+vert_h_hig=20.
+## vert_prof_dissip used to choose the vertical profile
+## of horizontal dissipation (values are 0 and 1)
+vert_prof_dissip = 1
+dissip_zref = 50
+##  Avec ou sans strato
+ok_strato=y
+##  Activation ou non de la parametrisation de Hines pour la strato
+ok_hines=n
+#  Couche eponge dans les couches de pression plus faible que 100 fois la pression de la derniere couche
+iflag_top_bound=2
+#  Coefficient pour la couche eponge (valeur derniere couche)
+tau_top_bound=5.e-4
+#
Index: CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/POST/monitoring01_inca.cfg
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/POST/monitoring01_inca.cfg	(revision 3559)
+++ CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/POST/monitoring01_inca.cfg	(revision 3559)
@@ -0,0 +1,98 @@
+#**************************************************************
+# Author: Patrick Brockmann
+# Contact: Patrick.Brockmann@cea.fr
+# $Date: 2009/05/14 15:09:35 $
+# $Name: ATLAS_608_1_5 $
+# $Revision: 1.1.1.2 $
+# History:
+# Modification:
+#**************************************************************
+
+##################################################################################################################
+#-----------------------------------------------------------------------------------------------------------------
+#  field | files patterns | files additionnal | operations | title | units | calcul of area
+#-----------------------------------------------------------------------------------------------------------------
+#
+#   field = name of the field to monitore 
+#   files patterns = pattern of the files used to monitore the field (must be discriminant) 
+#   files additionnal = additionnal files accessible by $FER_DATA
+#   operations = operations to calculate the field 
+#   title = variable title
+#   units = variable units
+#   calcul of area = expression to use for the weight average
+#
+# Notes:
+#   - Comment lines begin by # character.
+#   - Separator between fields is | character.
+#   - Operations must use the ferret syntax, if several files are used precise with the syntax d=x to refer to the x dataset.
+#     They must be enclosed by parenthesis if more than one variable is used.
+#   - files patterns,files additionnal,operations,title,units must be enclosed with character ". 
+#     Use "" if empty.
+#   - Fields will be presented through an html page with thumbnails global, north, south, land, ocean.
+#     Use a field name with one of these pattern to display it under the corresponding thumbnail.
+#
+##################################################################################################################
+
+color=F0D5F4
+smooth=12
+FreqTS=DA
+#-----------------------------------------------------------------------------------------------------------------
+#  field | files patterns | files additionnal | operations | title | units | calcul of area
+#-----------------------------------------------------------------------------------------------------------------
+od550bcas_global   | "od550bcas"    | "" | "od550bcas[d=1]"    	| "bc as optical depth @550nm" 	| "(-)" 	| "area[d=1]"
+od550oaas_global  | "od550oaas"   | "" | "od550oaas[d=1]"   	| "pom as optical depth @550nm" | "(-)" 	| "area[d=1]"
+od550so4as_global  | "od550so4as"   | "" | "od550so4as[d=1]"   	| "so4 as optical depth @550nm" | "(-)" 	| "area[d=1]"
+od550so4cs_global  | "od550so4cs"   | "" | "od550so4cs[d=1]"   	| "so4 cs optical depth @550nm" | "(-)" 	| "area[d=1]"
+od550ssss_global | "od550ssss"  | "" | "od550ssss[d=1]"  	| "ssssm optical depth @550nm" 	| "(-)" 	| "area[d=1]"
+od550ssas_global   | "od550ssas"    | "" | "od550ssas[d=1]"    	| "ss as optical depth @550nm" 	| "(-)" 	| "area[d=1]"
+od550ss_global	   | "od550ss" 	    | "" | "od550ss[d=1]"     	| "seasalt optical depth @550nm"| "(-)" 	| "area[d=1]"
+od550dust_global   | "od550dust"    | "" | "od550dust[d=1]"    	| "cidustm optical depth @550nm"| "(-)" 	| "area[d=1]"
+od550bcai_global   | "od550bcai"    | "" | "od550bcai[d=1]"    	| "bc optical depth @550nm" 	| "(-)" 	| "area[d=1]"
+od550oaai_global   | "od550oaai"    | "" | "od550oaai[d=1]"    	| "oa optical depth @550nm" 	| "(-)" 	| "area[d=1]"
+loaddustci_global  | "loaddustci"   | "" | "loaddustci[d=1]"   	| "loaddustci"   	| "(-)" 	| "area[d=1]"
+loadno3ci_global   | "loadno3ci"    | "" | "loadno3ci[d=1]"    	| "loadno3ci"    	| "(-)" 	| "area[d=1]"
+loadbcai_global	   | "loadbcai"     | "" | "loadbcai[d=1]"     	| "loadbcai"     	| "(-)" 	| "area[d=1]"
+loadoaai_global   | "loadoaai"    | "" | "loadoaai[d=1]"    	| "loadoaai"    	| "(-)" 	| "area[d=1]"
+loadsscs_global	   | "loadsscs"     | "" | "loadsscs[d=1]"     	| "loadsscs"     	| "(-)" 	| "area[d=1]"
+loadso4cs_global   | "loadso4cs"    | "" | "loadso4cs[d=1]"    	| "loadso4cs"    	| "(-)" 	| "area[d=1]"
+loadno3cs_global   | "loadno3cs"    | "" | "loadno3cs[d=1]"    	| "loadno3cs"    	| "(-)" 	| "area[d=1]"
+loadssas_global	   | "loadssas"     | "" | "loadssas[d=1]"     	| "loadssas"     	| "(-)" 	| "area[d=1]"
+loadbcas_global	   | "loadbcas"     | "" | "loadbcas[d=1]"     	| "loadbcas"     	| "(-)" 	| "area[d=1]"
+loadoaas_global   | "loadoaas"    | "" | "loadoaas[d=1]"    	| "loadoaas"    	| "(-)" 	| "area[d=1]"
+loadso4as_global   | "loadso4as"    | "" | "loadso4as[d=1]"    	| "loadso4as"    	| "(-)" 	| "area[d=1]"
+loadnh4as_global | "loadnh4as"  | "" | "loadnh4as[d=1]"  	| "loadnh4as"  	| "(-)" 	| "area[d=1]"
+loadno3as_global | "loadno3as"  | "" | "loadno3as[d=1]"  	| "loadno3as"  	| "(-)" 	| "area[d=1]"
+loadssss_global  | "loadssss"   | "" | "loadssss[d=1]"   	| "loadssss"   	| "(-)" 	| "area[d=1]"
+mmrso4cs_glo       | "mmrso4cs" | "" | "mmrso4cs[d=1,k=@ave]" | "CSSO4 ave on level" | "??" | "area[d=1]"
+mmrso4as_glo       | "mmrso4as" | "" | "mmrso4as[d=1,k=@ave]" | "ASSO4 ave on level" | "??" | "area[d=1]"
+mmrso4cs_surf       | "mmrso4cs" | "" | "mmrso4cs[d=1,k=39]" | "CSSO4 at surface" | "??" | "area[d=1]"
+mmrso4as_surf       | "mmrso4as" | "" | "mmrso4as[d=1,k=39]" | "ASSO4 at surface" | "??" | "area[d=1]"
+mmrssss_glo       | "mmrssss" | "" | "mmrssss[d=1,k=@ave]" | "ASSSSM ave on level" | "??" | "area[d=1]"
+mmrssss_surf      | "mmrssss" | "" | "mmrssss[d=1,k=39]"   | "ASSSSM at surface" | "??" | "area[d=1]"
+mmrdustci_glo       | "mmrdustci" | "" | "mmrdustic[d=1,k=@ave]" | "CIDUSTM ave on level" | "??" | "area[d=1]"
+mmrdustci_surf      | "mmrdustci" | "" | "mmrdustic[d=1,k=39]"   | "CIDUSTM at surface" | "??" | "area[d=1]"
+mmrbcai_glo       | "mmrbcai" | "" | "mmrbcai[d=1,k=@ave]" | "AIBCM ave on level" | "??" | "area[d=1]"
+mmrbcai_surf      | "mmrbcai" | "" | "mmrbcai[d=1,k=39]"   | "AIBCM at surface" | "??" | "area[d=1]"
+vmrhno3_glo       | "vmrhno3" | "" | "vmrhno3[d=1,k=@ave]" | "HNO3 ave on level" | "??" | "area[d=1]"
+vmrhno3_surf      | "vmrhno3" | "" | "vmrhno3[d=1,k=39]"   | "HNO3 at surface" | "??" | "area[d=1]"
+vmrno3_glo       | "vmrno3" | "" | "vmrno3[d=1,k=@ave]" | "NO3 ave on level" | "??" | "area[d=1]"
+vmrno3_surf      | "vmrno3" | "" | "vmrno3[d=1,k=39]"   | "NO3 at surface" | "??" | "area[d=1]"
+o3_col_global      | "colo3" 	    | "" | "colo3[d=1]" 	| "colo3" 	 | "?" | "area[d=1]"
+co_col_global	   | "colco" 	    | "" | "colco[d=1]"		| "colco" 	 | "?" | "area[d=1]"
+so2_col_global	   | "colso2" 	    | "" | "colso2[d=1]"	| "colso2" 	 | "?" | "area[d=1]"
+oh_col_global	   | "coloh" 	    | "" | "coloh[d=1]"		| "coloh" 	 | "?" | "area[d=1]"
+no2_col_global	   | "colno2" 	    | "" | "colno2[d=1]" 	| "colno2" 	 | "?" | "area[d=1]"
+ch2o_col_global    | "colch2o"     | "" | "colch2o[d=1]" 	| "colch2o" 	 | "?" | "area[d=1]"
+ch4_col_global	   | "colch4" 	    | "" | "colch4[d=1]" 	| "colch4" 	 | "?" | "area[d=1]"
+hno2_col_global    | "colhno2"     | "" | "colhno2[d=1]" 	| "colhno2" 	 | "?" | "area[d=1]"
+swtoaasdust_global | "SWTOAAS_DUST" | "" | "SWTOAAS_DUST[d=1]" | "SW Top-of-Atm Rad. flx dust"            |"W m-2"      | "area[d=1]"
+swtoaasss_global | "SWTOAAS_SS" | "" | "SWTOAAS_SS[d=1]" | "SW Top-of-Atm Rad. seasalt"            |"W m-2"      | "area[d=1]"
+swtoaasant_global  | "SWTOAAS_ANT"  | "" | "SWTOAAS_ANT[d=1]"  | "SWTOAAS_ANT " | "W m-2" | "area[d=1]"
+swtoaasaer_global  | "SWTOAAS_AER"  | "" | "SWTOAAS_AER[d=1]"  | "SWTOAAS_AER " | "W m-2" | "area[d=1]"
+swtoaasnat_global  | "SWTOAAS_NAT"  | "" | "SWTOAAS_NAT[d=1]"  | "SWTOAAS_NAT " | "W m-2" | "area[d=1]"
+swtoaasbc_global   | "SWTOAAS_BC"   | "" | "SWTOAAS_BC[d=1]"   | "SWTOAAS_BC  " | "W m-2" | "area[d=1]"
+swtoaasso4_global  | "SWTOAAS_SO4"  | "" | "SWTOAAS_SO4[d=1]"  | "SWTOAAS_SO4 " | "W m-2" | "area[d=1]"
+swtoaaspom_global  | "SWTOAAS_POM"  | "" | "SWTOAAS_POM[d=1]"  | "SWTOAAS_POM " | "W m-2" | "area[d=1]"
+swtoaasdno3_global | "SWTOAAS_DNO3" | "" | "SWTOAAS_DNO3[d=1]" | "SWTOAAS_DNO3" | "W m-2" | "area[d=1]"
+swtoaassno3_global | "SWTOAAS_SNO3" | "" | "SWTOAAS_SNO3[d=1]" | "SWTOAAS_SNO3" | "W m-2" | "area[d=1]"
+swtoaasfno3_global | "SWTOAAS_FNO3" | "" | "SWTOAAS_FNO3[d=1]" | "SWTOAAS_FNO3" | "W m-2" | "area[d=1]"
Index: CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/POST/monitoring01_lmdz.cfg
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/POST/monitoring01_lmdz.cfg	(revision 3559)
+++ CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/POST/monitoring01_lmdz.cfg	(revision 3559)
@@ -0,0 +1,76 @@
+#**************************************************************
+# Author: Patrick Brockmann
+# Contact: Patrick.Brockmann@cea.fr
+# $Date: 2009/05/14 15:09:35 $
+# $Name: ATLAS_608_1_5 $
+# $Revision: 1.1.1.2 $
+# History:
+# Modification:
+#**************************************************************
+
+##################################################################################################################
+#-----------------------------------------------------------------------------------------------------------------
+#  field | files patterns | files additionnal | operations | title | units | calcul of area
+#-----------------------------------------------------------------------------------------------------------------
+#
+#   field = name of the field to monitore 
+#   files patterns = pattern of the files used to monitore the field (must be discriminant) 
+#   files additionnal = additionnal files accessible by $FER_DATA
+#   operations = operations to calculate the field 
+#   title = variable title
+#   units = variable units
+#   calcul of area = expression to use for the weight average
+#
+# Notes:
+#   - Comment lines begin by # character.
+#   - Separator between fields is | character.
+#   - Operations must use the ferret syntax, if several files are used precise with the syntax d=x to refer to the x dataset.
+#     They must be enclosed by parenthesis if more than one variable is used.
+#   - files patterns,files additionnal,operations,title,units must be enclosed with character ". 
+#     Use "" if empty.
+#   - Fields will be presented through an html page with thumbnails global, north, south, land, ocean.
+#     Use a field name with one of these pattern to display it under the corresponding thumbnail.
+#
+##################################################################################################################
+
+color=AECDFF
+smooth=12
+#-----------------------------------------------------------------------------------------------------------------
+#  field | files patterns | files additionnal | operations | title | units | calcul of area
+#-----------------------------------------------------------------------------------------------------------------
+ bils_global    | "bils"                       | "" | "bils[d=1]"               | "Surf. total heat flux (GLOBAL)"         | "W/m^2"     | "aire[d=1]"   
+ nettop_global  | "tops topl"                  | "" | "(tops[d=1]-topl[d=2])"   | "TOA. total heat flux (GLOBAL)"          | "W/m^2"     | "aire[d=1]"
+ nettop0_global | "tops0 topl0"                | "" | "(tops0[d=1]-topl0[d=2])" | "TOA. total heat flux ClearSky (GLOBAL)" | "W/m^2"     | "aire[d=1]"
+ t2m_global     | "t2m"                        | "" | "(t2m[d=1]-273.15)"       | "Temperature at 2 meters (GLOBAL)"       | "degrees C" | "aire[d=1]"
+ t2m_land       | "t2m pourc_ter pourc_lic"    | "" | "(t2m[d=1]-273.15)"       | "Temperature at 2 meters (LAND)"         | "degrees C" | "aire[d=1]*((pourc_ter[d=2]+pourc_lic[d=3])/100.)"
+ tsol_global    | "tsol"                       | "" | "(tsol[d=1]-273.15)"      | "Surface Temperature (GLOBAL)"           | "degrees C" | "aire[d=1]"
+ tsol_land      | "tsol pourc_ter pourc_lic"   | "" | "(tsol[d=1]-273.15)"      | "Surface Temperature (LAND)"             | "degrees C" | "aire[d=1]*((pourc_ter[d=2]+pourc_lic[d=3])/100.)"
+ precip_global  | "precip"                     | "" | "precip[d=1]*86400"       | "Precipitation Totale liq+sol (GLOBAL)"  | "mm/d"      | "aire[d=1]"
+ precip_land    | "precip pourc_ter pourc_lic" | "" | "precip[d=1]*86400"       | "Precipitation Totale liq+sol (LAND)"    | "mm/d"      | "aire[d=1]*((pourc_ter[d=2]+pourc_lic[d=3])/100.)"
+ evap_global    | "evap"                       | "" | "evap[d=1]"               | "Evaporation (GLOBAL)"                   | "kg/(s*m2)" | "aire[d=1]"
+ evap_land      | "evap pourc_ter pourc_lic"   | "" | "evap[d=1]"               | "Evaporation (LAND)"                     | "kg/(s*m2)" | "aire[d=1]*((pourc_ter[d=2]+pourc_lic[d=3])/100.)"
+ flat_global    | "lat_ter pourc_ter lat_sic pourc_sic lat_lic pourc_lic lat_oce pourc_oce" | "" | "(lat_ter[d=1]*pourc_ter[d=2]+lat_sic[d=3]*pourc_sic[d=4]+lat_lic[d=5]*pourc_lic[d=6]+lat_oce[d=7]*pourc_oce[d=8])" | "Latent Heat Flux (GLOBAL)"      | "W/m^2" | "aire[d=1]"
+ prw_global     | "prw"                        | "" | "prw[d=1]"                | "Precipitable water (GLOBAL)"            | "kg/m^2"    | "aire[d=1]"
+ ener_global    | "nettop precip snow sols soll sens" | "" | "nettop[d=1,x=@ave,y=@ave]+(precip[d=2,x=@ave,y=@ave]-snow[d=3,x=@ave,y=@ave])*2.5008E+6+snow[d=3,x=@ave,y=@ave]*2.8345E+6-sols[d=4,x=@ave,y=@ave]-soll[d=5,x=@ave,y=@ave]-sens[d=6,x=@ave,y=@ave]" | "Destruction d energie par l atmosphere" | "W/m^2" | "1" |
+ od550aer_tropo_forcing | "od550aer"              | "" | "od550aer[d=1]"           | "Total aerosol optical depth at 550nm"   | "-"         | "aire[d=1]"   
+ od550aer_strat_forcing | "OD550_STRAT"           | "" | "OD550_STRAT[d=1]"        | "Aerosol optical depth at 550nm"         | "-"         | "aire[d=1]"   
+ od550lt1aer_forcing    | "od550lt1aer"           | "" | "od550lt1aer[d=1]"        | "Fine mode optical depth"                | "-"         | "aire[d=1]"   
+ absvisaer_forcing      | "absvisaer"             | "" | "absvisaer[d=1]"          | "Absorption aerosol visible optical depth" | "-"       | "aire[d=1]"   
+ topswai_forcing        | "topswai"               | "" | "topswai[d=1]"            | "AIE at TOA"                             | "W/m^2" | "aire[d=1]"
+ solswai_forcing        | "solswai"               | "" | "solswai[d=1]"            | "AIE at SRF"                             | "W/m^2" | "aire[d=1]"
+ topswad_forcing        | "topswad"               | "" | "topswad[d=1]"            | "ADE at TOA"                             | "W/m^2" | "aire[d=1]"
+ solswad_forcing        | "solswad"               | "" | "solswad[d=1]"            | "ADE at SRF"                             | "W/m^2" | "aire[d=1]" 
+ tro3_strato_forcing    | "tro3"                  | "" | "tro3[x=@din,y=@din,k=1:7@sum,d=1]"  | "ozone strato k=1:7@sum" | "Mole" | ""
+ tro3_tropo_forcing     | "tro3"                  | "" | "tro3[x=@din,y=@din,k=8:17@sum,d=1]" | "ozone trop k=8:17@sum"  | "Mole" | ""
+ solaire_forcing        | "solaire"               | "" | "solaire[d=1]"   | "Constante solaire"      | "W/m^2" | "1"
+ rsun1_forcing          | "rsun1"                 | "" | "rsun1[d=1]"     | "Fraction bande 1"       | "-"     | "1"
+ co2_ppm_forcing        | "co2_ppm"               | "" | "co2_ppm[d=1]"   | "Concentration du CO2"   | "ppm"   | "1"
+ CH4_ppb_forcing        | "CH4_ppb"               | "" | "CH4_ppb[d=1]"   | "Concentration du CH4"   | "ppb"   | "1"
+ N2O_ppb_forcing        | "N2O_ppb"               | "" | "N2O_ppb[d=1]"   | "Concentration du N2O"   | "ppb"   | "1"
+ CFC11_ppt_forcing      | "CFC11_ppt"             | "" | "CFC11_ppt[d=1]" | "Concentration du CFC11" | "ppt"   | "1"
+ CFC12_ppt_forcing      | "CFC12_ppt"             | "" | "CFC12_ppt[d=1]" | "Concentration du CFC12" | "ppt"   | "1"
+## R_ecc_forcing      | "R_ecc"                  | "" | "R_ecc[d=1]"   | "Excentricite"      | "-"     | "1"
+## R_peri_forcing     | "R_peri"                 | "" | "R_peri[d=1]"  | "Equinoxe"          | "-"     | "1"
+## R_incl_forcing     | "R_incl"                 | "" | "R_incl[d=1]"  | "Inclinaison"       | "deg"   | "1"
+#-----------------------------------------------------------------------------------------------------------------
+
Index: CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/POST/monitoring01_orchidee.cfg
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/POST/monitoring01_orchidee.cfg	(revision 3559)
+++ CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/POST/monitoring01_orchidee.cfg	(revision 3559)
@@ -0,0 +1,65 @@
+#**************************************************************
+# Author: Patrick Brockmann
+# Contact: Patrick.Brockmann@cea.fr
+# $Date: 2009/05/14 15:09:35 $
+# $Name: ATLAS_608_1_5 $
+# $Revision: 1.1.1.2 $
+# History:
+# Modification:
+#**************************************************************
+
+##################################################################################################################
+#-----------------------------------------------------------------------------------------------------------------
+#  field | files patterns | files additionnal | operations | title | units | calcul of area
+#-----------------------------------------------------------------------------------------------------------------
+#
+#   field = name of the field to monitore 
+#   files patterns = pattern of the files used to monitore the field (must be discriminant) 
+#   files additionnal = additionnal files accessible by $FER_DATA
+#   operations = operations to calculate the field 
+#   title = variable title
+#   units = variable units
+#   calcul of area = expression to use for the weight average
+#
+# Notes:
+#   - Comment lines begin by # character.
+#   - Separator between fields is | character.
+#   - Operations must use the ferret syntax, if several files are used precise with the syntax d=x to refer to the x dataset.
+#     They must be enclosed by parenthesis if more than one variable is used.
+#   - files patterns,files additionnal,operations,title,units must be enclosed with character ". 
+#     Use "" if empty.
+#   - Fields will be presented through an html page with thumbnails global, north, south, land, ocean.
+#     Use a field name with one of these pattern to display it under the corresponding thumbnail.
+#
+##################################################################################################################
+
+color=E7FFAB
+smooth=12
+#------------------------------------------------------------------------------------------------------------------------------------------------------
+#  field | files patterns | files additionnal | operations | title | units | calcul of area
+#------------------------------------------------------------------------------------------------------------------------------------------------------
+delta_water_stock | "nobiofrac DelSoilMoist_daily DelIntercept_daily DelSWE_daily delstock_routing" |  "" | "((1-nobiofrac[d=1])*DelSoilMoist_daily[d=2] + DelIntercept_daily[d=3] + DelSWE_daily[d=4] + delstock_routing[d=5])" | "Change in total water stock (LANDS) " | "kg/day/m2 of land" | "Areas[d=2]*Contfrac[d=2]"
+water_budget_closure | "nobiofrac DelSoilMoist_daily DelIntercept_daily DelSWE_daily delstock_routing rain snowf evap riverflow coastalflow" | "" | "(((1-nobiofrac[d=1])*DelSoilMoist_daily[d=2] + DelIntercept_daily[d=3] + DelSWE_daily[d=4] +  delstock_routing[d=5])*Areas[d=1]*Contfrac[d=1] -  ((rain[d=6] + snowf[d=7] - evap[d=8])*Areas[d=1]*Contfrac[d=1]  - (riverflow[d=9] + coastalflow[d=10])*1000*86400 ))/(4*3.14*6370000*6370000*0.26)" | "Water budget closure (LANDS) " | "kg/day/m2 of land" | "2"
+twbr_lands       | "TWBR"             |  "" | "twbr[d=1]*86400"                  | "Hydrol water buget residu (LANDS)" | "kg/m^2/d" | "Areas[d=1]*Contfrac[d=1]"
+temp_sol_lands   | "temp_sol"         |  "" | "temp_sol[d=1]"                    | "TSOL (LANDS)"                      | "C"        | "Areas[d=1]*Contfrac[d=1]"
+fluxsens_lands   | "fluxsens"         |  "" | "fluxsens[d=1]"                    | "Sensible Flux (LANDS)"             | "W/m^2"    | "Areas[d=1]*Contfrac[d=1]"
+evap_lands       | "evap"             |  "" | "evap[d=1]"                        | "Evaporation (LANDS)"               | "mm/d"     | "Areas[d=1]*Contfrac[d=1]"
+evapnu_lands     | "evapnu"           |  "" | "evapnu[d=1]"                      | "Soil evaporation (LANDS)"          | "mm/d"     | "Areas[d=1]*Contfrac[d=1]"
+transpir_lands   | "transpir"         |  "" | "transpir[d=1,k=@sum]"             | "Transpiration (sum over all PFT, LANDS)" | "mm/d" | "Areas[d=1]*Contfrac[d=1]"
+subli_lands      | "subli"            |  "" | "subli[d=1]"                       | "Sublimation (LANDS)"               | "mm/d"     | "Areas[d=1]*Contfrac[d=1]"
+snow_swe_lands   | "frac_snow snow"   |  "" | "snow[d=2]"                        | "Snow Mass (LANDS)"                 | "kg/m^2"   | "Areas[d=2]*Contfrac[d=2]"
+snownobio_lands  | "snownobio"        |  "" | "snownobio[d=1]"                   | "Snow Other Surfaces (LANDS)"       | "kg/m^2"   | "Areas[d=1]*Contfrac[d=1]"
+snowf_lands      | "snowf"            |  "" | "snowf[d=1]"                       | "Snowfall (LANDS)"                  | "mm/d"     | "Areas[d=1]*Contfrac[d=1]"
+precip_lands     | "rain snowf"       |  "" | "rain[d=1] + snowf[d=2]"           | "Total precipitaion (LANDS)"        | "mm/d"     | "Areas[d=1]*Contfrac[d=1]"
+runoff_lands     | "runoff"           |  "" | "runoff[d=1]"                      | "Surface runoff  (LANDS)"           | "kg/m^2"   | "Areas[d=1]*Contfrac[d=1]"
+drainage_lands   | "drainage"         |  "" | "drainage[d=1]"                    | "Drainage  (LANDS)"                 | "kg/m^2"   | "Areas[d=1]*Contfrac[d=1]"
+humidity_lands   | "mrso"             |  "" | "mrso[d=1]"                        | "Total Soil Moisture  (LANDS)"      | "kg/m^2"   | "Areas[d=1]*Contfrac[d=1]"
+surface_humidity_lands | "mrsos"      |  "" | "mrsos[d=1]"                       | "Top 10cm soil moisture  (LANDS)"   | "kg/m^2"   | "Areas[d=1]*Contfrac[d=1]"
+albedo_lands     | "alb_vis alb_nir"  |  "" | "((alb_vis[d=1]+alb_nir[d=2])*0.5)"| "Mean Albedo (LANDS)"               | "1"        | "Areas[d=1]*Contfrac[d=1]"
+lai_lands        | "LAImean"          |  "" | "LAImean[d=1]"                     | "LAI (mean excluding PFT=1) (LANDS)"| "1"        | "Areas[d=1]*Contfrac[d=1]"
+nee_lands        | "nee maxvegetfrac" |  "" | "(nee[d=1]*365*86400*maxvegetfrac[d=2]*Areas[d=1]*Contfrac[d=1]/1e15)"   | "Net Ecosystem Exchange" | "PgC/yr" | "2"
+maxveget_forcing | "maxvegetfrac"     |  "" | "maxvegetfrac[d=1,K=12:13@sum]"    | "veget_max fraction of agriculture [sum of pft=12,13] "| "1"  | "Areas[d=1]*Contfrac[d=1]"
+vegetn_lands     | "vegetfrac"        |  "" | "vegetfrac[d=1,K=2:9@sum]"         | "veget trees[sum of pft=2:9] (LANDS)"                  | "1"  | "Areas[d=1]*Contfrac[d=1]"
+vegetg_lands     | "vegetfrac"        |  "" | "vegetfrac[d=1,K=10:11@sum]"       | "veget natural grasses[sum of pft=10,11] (LANDS)"      | "1"  | "Areas[d=1]*Contfrac[d=1]"
+vegeta_lands     | "vegetfrac"        |  "" | "vegetfrac[d=1,K=12:13@sum]"       | "veget agriculture [sum of pft=12,13] (LANDS)"         | "1"  | "Areas[d=1]*Contfrac[d=1]"
+
Index: CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/POST/monitoring01_stomate.cfg
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/POST/monitoring01_stomate.cfg	(revision 3559)
+++ CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/GENERAL/POST/monitoring01_stomate.cfg	(revision 3559)
@@ -0,0 +1,51 @@
+#**************************************************************
+# Author: Patrick Brockmann
+# Contact: Patrick.Brockmann@cea.fr
+# $Date: 2009/05/14 15:09:35 $
+# $Name: ATLAS_608_1_5 $
+# $Revision: 1.1.1.2 $
+# History:
+# Modification:
+#**************************************************************
+
+##################################################################################################################
+#-----------------------------------------------------------------------------------------------------------------
+#  field | files patterns | files additionnal | operations | title | units | calcul of area
+#-----------------------------------------------------------------------------------------------------------------
+#
+#   field = name of the field to monitore 
+#   files patterns = pattern of the files used to monitore the field (must be discriminant) 
+#   files additionnal = additionnal files accessible by $FER_DATA
+#   operations = operations to calculate the field 
+#   title = variable title
+#   units = variable units
+#   calcul of area = expression to use for the weight average
+#
+# Notes:
+#   - Comment lines begin by # character.
+#   - Separator between fields is | character.
+#   - Operations must use the ferret syntax, if several files are used precise with the syntax d=x to refer to the x dataset.
+#     They must be enclosed by parenthesis if more than one variable is used.
+#   - files patterns,files additionnal,operations,title,units must be enclosed with character ". 
+#     Use "" if empty.
+#   - Fields will be presented through an html page with thumbnails global, north, south, land, ocean.
+#     Use a field name with one of these pattern to display it under the corresponding thumbnail.
+#
+##################################################################################################################
+
+color=EEE8AA
+smooth=12
+#------------------------------------------------------------------------------------------------------------------------------------------------------
+#  field | files patterns | files additionnal | operations | title | units | calcul of area
+#------------------------------------------------------------------------------------------------------------------------------------------------------
+fLuc_fHarvest_lands | "CONVFLUX CFLUX_PROD10 CFLUX_PROD100 HARVEST_ABOVE"  | "" | "((CONVFLUX[d=1]+CFLUX_PROD10[d=2]+CFLUX_PROD100[d=3]+HARVEST_ABOVE[d=4])*AREAS[d=1]*CONTFRAC[d=1]*365/1e15)" | "CO2 flux from Land Use Change and Crop Harvesting" | "PgC/yr" | "2"
+fHarvest_lands      | "HARVEST_ABOVE"             | "" | "((HARVEST_ABOVE[d=1])*AREAS[d=1]*CONTFRAC[d=1]*365/1e15)"                | "CO2 flux from Land Use Change and Crop Harvesting"        | "PgC/yr" | "2"
+nbp_lands           | "nbp"                       | "" | "(nbp[d=1]*AREAS[d=1]*CONTFRAC[d=1]*86400*365/1e12)"                      | "Net Biospheric Production"                                | "PgC/yr" | "2"
+cSoil_lands         | "TOTAL_SOIL_CARB VEGET_MAX" | "" | "(TOTAL_SOIL_CARB[d=1]*VEGET_MAX[d=2]*AREAS[d=1]*CONTFRAC[d=1]/1e15)"     | "Carbon Soil in Pool"                                      | "PgC"    | "2"
+cVeg_lands          | "TOTAL_M VEGET_MAX"         | "" | "(TOTAL_M[d=1]*VEGET_MAX[d=2]*AREAS[d=1]*CONTFRAC[d=1]/1e15)"             | "Carbon in vegetation"                                     | "PgC"    | "2"
+npp_lands           | "NPP VEGET_MAX"             | "" | "(NPP[d=1]*365*VEGET_MAX[d=2]*AREAS[d=1]*CONTFRAC[d=1]/1e15)"             | "Net Primary Production"                                   | "PgC/yr" | "2"
+rh_lands            | "HET_RESP VEGET_MAX"        | "" | "(HET_RESP[d=1]*365*VEGET_MAX[d=2]*AREAS[d=1]*CONTFRAC[d=1]/1e15)"        | "Heterotrophic Respiration"                                | "PgC/yr" | "2"
+fFire_lands         | "CO2_FIRE VEGET_MAX"        | "" | "(CO2_FIRE[d=1]*365*VEGET_MAX[d=2]*AREAS[d=1]*CONTFRAC[d=1]/1e15)"        | "CO2 emission from fire"                                   | "PgC/yr" | "2"
+#------------------------------------------------------------------------------------------------------------------------------------------------------
+
+
Index: CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/README
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/README	(revision 3559)
+++ CONFIG/UNIFORM/v6/LMDZORINCAREPR_v6/README	(revision 3559)
@@ -0,0 +1,13 @@
+How to create a job and run directory :
+
+Choose in EXPERIMENTS the experiment to be done and copy the corresponding config.card to modipsl/config/LMDZORINCA_v6/, beside this README file. Modify the config.card as usual, for at least the JobName. Apply ../../libIGCM/ins_job and the creation of a new run directory will be done :
+  - the run directory will be created with the same name as JobName in config.card. If a directory with the same name already exists, nothing will be done.
+  - the PARAM, DRIVER and POST directories from GENERAL/ will be copied into the new run directory.
+  - the COMP directory from EXPERIMENTS/ will be copied into the new run directory, according to the variable ExpType in config.card.
+  - the config.card will be moved into the run directory.
+  - a job will be created in the run directory.
+
+Once the run directory has been created with ins_job, this directory is used as a normal run directory. More run directories can be created using ins_job several times. ins_job will never write in an existing run directory.
+
+
+Documentation on how to use the configurations are found here : http://forge.ipsl.jussieu.fr/igcmg_doc/wiki/Doc
