Index: CONFIG/UNIFORM/v6/IPSLESM6/EXPERIMENTS/LMDZOR/amip/COMP/lmdz.card
===================================================================
--- CONFIG/UNIFORM/v6/IPSLESM6/EXPERIMENTS/LMDZOR/amip/COMP/lmdz.card	(revision 3687)
+++ CONFIG/UNIFORM/v6/IPSLESM6/EXPERIMENTS/LMDZOR/amip/COMP/lmdz.card	(revision 3758)
@@ -11,5 +11,6 @@
 # LMDZ_Physics=NPv6.0.8 for new physics to be used with LMDZ5/trunk revision 2739 or later
 # LMDZ_Physics=NPv6.0.15_T or NPv6.0.15_S to be used with LMDZ6/branches/IPSLCM6.0.15 rev 3224
-LMDZ_Physics=NPv6.0.15_T
+# LMDZ_Physics=NPv6.1 to be used with LMDZ6/branches/IPSLCM6.0.15 rev 3301
+LMDZ_Physics=NPv6.1
 
 # Set ConfType to choose parameters for aerosols, solar and green house gazes.
@@ -37,5 +38,5 @@
 
 # Set COSP activation and output frequency (monthly, daily, HF) = y/n
-LMDZ_COSP_OK=n
+LMDZ_COSP_OK=y
 LMDZ_COSP_monthly=n
 LMDZ_COSP_daily=n
@@ -59,5 +60,5 @@
 List=   (${R_IN}/ATM/LIMIT/AMIP.v20170419/interpol/${RESOL_ATM_XY}_eORCA1.2_gregorian/limit_${year}.nc, limit.nc),\
         (${R_IN}/ATM/AEROSOLS/CMIP6/v1/${RESOL_ATM_XY}/L${RESOL_ATM_Z}/aerosols${year}_from_inca.nc,              aerosols${year}.nc),\
-        (${R_IN}/ATM/OZONE/UReading/historical.v20160711/interpol/${RESOL_ATM_XY}/climoz_LMDZ_${year}.nc, climoz_LMDZ.nc),\
+        (${R_IN}/ATM/OZONE/UReading/historical.v20160711.v2/interpol/${RESOL_ATM_XY}/climoz_LMDZ_${year}.nc, climoz_LMDZ.nc),\
         (${R_IN}/ATM/SOLAR/CMIP6/v3.1corr/Historical/solarforcing_v3.1_daily_6bands_${year}.nc,        solarforcing.nc),\
         (${R_IN}/ATM/STRATAERO/CMIP6/v3/${RESOL_ATM_XY}/L${RESOL_ATM_Z}/taulwstrat.2D.${year}.nc, taulwstrat.2D.nc),\
Index: CONFIG/UNIFORM/v6/IPSLESM6/EXPERIMENTS/LMDZOR/amip/COMP/stomate.card
===================================================================
--- CONFIG/UNIFORM/v6/IPSLESM6/EXPERIMENTS/LMDZOR/amip/COMP/stomate.card	(revision 3687)
+++ CONFIG/UNIFORM/v6/IPSLESM6/EXPERIMENTS/LMDZOR/amip/COMP/stomate.card	(revision 3758)
@@ -7,7 +7,7 @@
 # Only the files stomate_history.nc and stomate_ipcc_history.nc can be set here.
 # output_level_filname=0     : lowest level writing only variables needed for the monitoring
-# output_level_filname=1     : highest level which will output all variables
+# output_level_filname=10    : highest level which will output all variables
 # output_level_filname=NONE  : deactivate the file
-output_level_stomate_history = 1
+output_level_stomate_history = 10
 output_level_stomate_ipcc_history = 1
 
Index: CONFIG/UNIFORM/v6/IPSLESM6/EXPERIMENTS/LMDZOR/clim_360d/COMP/lmdz.card
===================================================================
--- CONFIG/UNIFORM/v6/IPSLESM6/EXPERIMENTS/LMDZOR/clim_360d/COMP/lmdz.card	(revision 3687)
+++ CONFIG/UNIFORM/v6/IPSLESM6/EXPERIMENTS/LMDZOR/clim_360d/COMP/lmdz.card	(revision 3758)
@@ -11,5 +11,7 @@
 # LMDZ_Physics=NPv6.0.8 for new physics to be used with LMDZ5/trunk revision 2739 or later
 # LMDZ_Physics=NPv6.0.15_T or NPv6.0.15_S to be used with LMDZ6/branches/IPSLCM6.0.15 rev 3224
-LMDZ_Physics=NPv6.0.15_T
+# LMDZ_Physics=NPv6.1 to be used with LMDZ6/branches/IPSLCM6.0.15 rev 3301
+LMDZ_Physics=NPv6.1
+
 # Set ConfType to choose parameters for aerosols, solar and green house gazes.
 # The parameter file PARAM/config.def_$ConfType will be used.
@@ -36,5 +38,5 @@
 
 # Set COSP activation and output frequency (monthly, daily, HF) = y/n
-LMDZ_COSP_OK=n
+LMDZ_COSP_OK=y
 LMDZ_COSP_monthly=n
 LMDZ_COSP_daily=n
@@ -59,5 +61,5 @@
             (${R_IN}/ATM/AEROSOLS/CMIP6/v1/${RESOL_ATM_XY}/L${RESOL_ATM_Z}/aerosols1850_from_inca.nc,   aerosols.nat.nc),\
             (${R_IN}/ATM/AEROSOLS/CMIP6/v1/${RESOL_ATM_XY}/L${RESOL_ATM_Z}/aerosols1995_from_inca.nc,   aerosols1980.nc),\
-            (${R_IN}/ATM/OZONE/UReading/historical.v20160711/interpol/${RESOL_ATM_XY}/climoz_LMDZ_1979_2008_clim.nc, climoz_LMDZ.nc),\
+            (${R_IN}/ATM/OZONE/UReading/historical.v20160711.v2/interpol/${RESOL_ATM_XY}/climoz_LMDZ_1979_2008_clim.nc, climoz_LMDZ.nc),\
             (${R_IN}/ATM/SOLAR/CMIP6/v3.1corr/Control/solarforcing_v3.1_pdControl_ave_6bands_360days.nc, solarforcing.nc),\
             (${R_IN}/ATM/STRATAERO/CMIP6/v3/${RESOL_ATM_XY}/L${RESOL_ATM_Z}/taulwstrat.2D.ave.nc, taulwstrat.2D.nc),\
Index: CONFIG/UNIFORM/v6/IPSLESM6/EXPERIMENTS/LMDZOR/clim_360d/COMP/stomate.card
===================================================================
--- CONFIG/UNIFORM/v6/IPSLESM6/EXPERIMENTS/LMDZOR/clim_360d/COMP/stomate.card	(revision 3687)
+++ CONFIG/UNIFORM/v6/IPSLESM6/EXPERIMENTS/LMDZOR/clim_360d/COMP/stomate.card	(revision 3758)
@@ -7,7 +7,7 @@
 # Only the files stomate_history.nc and stomate_ipcc_history.nc can be set here.
 # output_level_filname=0     : lowest level writing only variables needed for the monitoring
-# output_level_filname=1     : highest level which will output all variables
+# output_level_filname=10    : highest level which will output all variables
 # output_level_filname=NONE  : deactivate the file
-output_level_stomate_history = 1
+output_level_stomate_history = 10
 output_level_stomate_ipcc_history = 1
 
Index: CONFIG/UNIFORM/v6/IPSLESM6/EXPERIMENTS/LMDZOR/clim_pdControl/COMP/lmdz.card
===================================================================
--- CONFIG/UNIFORM/v6/IPSLESM6/EXPERIMENTS/LMDZOR/clim_pdControl/COMP/lmdz.card	(revision 3687)
+++ CONFIG/UNIFORM/v6/IPSLESM6/EXPERIMENTS/LMDZOR/clim_pdControl/COMP/lmdz.card	(revision 3758)
@@ -11,5 +11,6 @@
 # LMDZ_Physics=NPv6.0.8 for new physics to be used with LMDZ5/trunk revision 2739 or later
 # LMDZ_Physics=NPv6.0.15_T or NPv6.0.15_S to be used with LMDZ6/branches/IPSLCM6.0.15 rev 3224
-LMDZ_Physics=NPv6.0.15_T
+# LMDZ_Physics=NPv6.1 to be used with LMDZ6/branches/IPSLCM6.0.15 rev 3301
+LMDZ_Physics=NPv6.1
 
 # Set ConfType to choose parameters for aerosols, solar and green house gazes.
@@ -37,5 +38,5 @@
 
 # Set COSP activation and output frequency (monthly, daily, HF) = y/n
-LMDZ_COSP_OK=n
+LMDZ_COSP_OK=y
 LMDZ_COSP_monthly=n
 LMDZ_COSP_daily=n
@@ -62,5 +63,5 @@
 ListNonDel= (${R_IN}/ATM/AEROSOLS/CMIP6/v1/${RESOL_ATM_XY}/L${RESOL_ATM_Z}/aerosols1850_from_inca.nc,   aerosols.nat.nc),\
             (${R_IN}/ATM/AEROSOLS/CMIP6/v1/${RESOL_ATM_XY}/L${RESOL_ATM_Z}/aerosols1995_from_inca.nc,   aerosols1980.nc),\
-            (${R_IN}/ATM/OZONE/UReading/historical.v20160711/interpol/${RESOL_ATM_XY}/climoz_LMDZ_1979_2008_clim.nc, climoz_LMDZ.nc),\
+            (${R_IN}/ATM/OZONE/UReading/historical.v20160711.v2/interpol/${RESOL_ATM_XY}/climoz_LMDZ_1979_2008_clim.nc, climoz_LMDZ.nc),\
             (${R_IN}/ATM/LIMIT/AMIP.v20170419/interpol/${RESOL_ATM_XY}_eORCA1.2_365d/limit_1979_2008_clim.nc, limit.nc),\
             (${R_IN}/ATM/SOLAR/CMIP6/v3.1corr/Control/solarforcing_v3.1_pdControl_ave_6bands_365days.nc, solarforcing.nc),\
Index: CONFIG/UNIFORM/v6/IPSLESM6/EXPERIMENTS/LMDZOR/clim_pdControl/COMP/stomate.card
===================================================================
--- CONFIG/UNIFORM/v6/IPSLESM6/EXPERIMENTS/LMDZOR/clim_pdControl/COMP/stomate.card	(revision 3687)
+++ CONFIG/UNIFORM/v6/IPSLESM6/EXPERIMENTS/LMDZOR/clim_pdControl/COMP/stomate.card	(revision 3758)
@@ -7,7 +7,7 @@
 # Only the files stomate_history.nc and stomate_ipcc_history.nc can be set here.
 # output_level_filname=0     : lowest level writing only variables needed for the monitoring
-# output_level_filname=1     : highest level which will output all variables
+# output_level_filname=10    : highest level which will output all variables
 # output_level_filname=NONE  : deactivate the file
-output_level_stomate_history = 1
+output_level_stomate_history = 10
 output_level_stomate_ipcc_history = 1
 
