Changeset 3967


Ignore:
Timestamp:
07/10/18 14:53:09 (2 years ago)
Author:
acosce
Message:

update LMDZORINCA_v6 to follow NPv6.1.5

Location:
CONFIG/UNIFORM/v6/LMDZORINCA_v6
Files:
4 added
24 edited

Legend:

Unmodified
Added
Removed
  • CONFIG/UNIFORM/v6/LMDZORINCA_v6/EXPERIMENTS/LMDZ/CREATE_amip/COMP/lmdz.card

    r3542 r3967  
    66[UserChoices] 
    77# Physics package to use 
    8 LMDZ_Physics=NPv6.0.11 
     8LMDZ_Physics=NPv6.1 
    99 
    1010# Manage radiative aerosol effect and ozone  
     
    1313ok_aie=y 
    1414aerosol_couple=n 
    15 read_climoz=2 
     15# read_climoz : interpolation of ozone files.  
     16# Use read_climoz=1 for CMIP6 ozone files, 2 for CMIP5 ozone files and 0 for no interpolation 
     17# LMDZ6/trunk revision 3281 or later is needed for read_climoz=1 (not included in branche IPSLCM6.0.15) 
     18read_climoz=0 
     19 
    1620ok_cdnc=y 
    1721 
     
    2024 
    2125[BoundaryFiles] 
    22 List=   (${R_IN}/ATM/LIMIT/AMIP.v20170419/original/360x180/BCS/amipbc_sst_360x180_${year}.nc,    amipbc_sst_1x1.nc), \ 
    23         (${R_IN}/ATM/LIMIT/AMIP.v20170419/original/360x180/BCS/amipbc_sst_360x180_${year_m1}.nc, amipbc_sst_1x1_m.nc), \ 
    24         (${R_IN}/ATM/LIMIT/AMIP.v20170419/original/360x180/BCS/amipbc_sst_360x180_${year_p1}.nc, amipbc_sst_1x1_p.nc), \ 
    25         (${R_IN}/ATM/LIMIT/AMIP.v20170419/original/360x180/BCS/amipbc_sic_360x180_${year}.nc,    amipbc_sic_1x1.nc), \ 
    26         (${R_IN}/ATM/LIMIT/AMIP.v20170419/original/360x180/BCS/amipbc_sic_360x180_${year_m1}.nc, amipbc_sic_1x1_m.nc), \ 
    27         (${R_IN}/ATM/LIMIT/AMIP.v20170419/original/360x180/BCS/amipbc_sic_360x180_${year_p1}.nc, amipbc_sic_1x1_p.nc), \ 
    28         (${R_IN}/ATM/Ozone/HYBRIDE/v2.clim/tro3_${year}.new.nc, climoz.nc) 
     26List=   (${R_IN}/ATM/LIMIT/AMIP.v20180427/original/360x180/BCS/amipbc_sst_360x180_${year}.nc,    amipbc_sst_1x1.nc), \ 
     27        (${R_IN}/ATM/LIMIT/AMIP.v20180427/original/360x180/BCS/amipbc_sst_360x180_${year_m1}.nc, amipbc_sst_1x1_m.nc), \ 
     28        (${R_IN}/ATM/LIMIT/AMIP.v20180427/original/360x180/BCS/amipbc_sst_360x180_${year_p1}.nc, amipbc_sst_1x1_p.nc), \ 
     29        (${R_IN}/ATM/LIMIT/AMIP.v20180427/original/360x180/BCS/amipbc_sic_360x180_${year}.nc,    amipbc_sic_1x1.nc), \ 
     30        (${R_IN}/ATM/LIMIT/AMIP.v20180427/original/360x180/BCS/amipbc_sic_360x180_${year_m1}.nc, amipbc_sic_1x1_m.nc), \ 
     31        (${R_IN}/ATM/LIMIT/AMIP.v20180427/original/360x180/BCS/amipbc_sic_360x180_${year_p1}.nc, amipbc_sic_1x1_p.nc), \ 
     32        (${R_IN}/ATM/OZONE/UReading/historical.v20160711.v2/original/144x96x66/tro3_${year_m1}.nc, climoz_m.nc), \ 
     33        (${R_IN}/ATM/OZONE/UReading/historical.v20160711.v2/original/144x96x66/tro3_${year}.nc, climoz.nc), \ 
     34        (${R_IN}/ATM/OZONE/UReading/historical.v20160711.v2/original/144x96x66/tro3_${year_p1}.nc, climoz_p.nc) 
    2935 
    3036ListNonDel= (${R_IN}/ATM/Albedo.nc, .), \ 
  • CONFIG/UNIFORM/v6/LMDZORINCA_v6/EXPERIMENTS/LMDZOR/amip/COMP/lmdz.card

    r3648 r3967  
    1111# LMDZ_Physics=NPv6.0.8 for new physics to be used with LMDZ5/trunk revision 2739 or later 
    1212# LMDZ_Physics=NPv6.0.15_T or NPv6.0.15_S to be used with LMDZ6/branches/IPSLCM6.0.15 rev 3224 
    13 LMDZ_Physics=NPv6.0.15_T 
     13# LMDZ_Physics=NPv6.1 to be used with LMDZ6/branches/IPSLCM6.0.15 rev 3301 
     14LMDZ_Physics=NPv6.1 
    1415 
    1516# Set ConfType to choose parameters for aerosols, solar and green house gazes. 
     
    2627ok_cdnc=y 
    2728 
     29# Set tau_gl depending on the forcing file for the sea-ice (use 2. for amip and 1. for hadisst) 
     30tau_gl=2. 
     31 
    2832# ByPass_hgardfou_teta=y : modify teta_ parameters for following CumulPeriod only 
    2933ByPass_hgardfou_teta=n 
     
    3741 
    3842# Set COSP activation and output frequency (monthly, daily, HF) = y/n 
    39 LMDZ_COSP_OK=n 
     43LMDZ_COSP_OK=y 
    4044LMDZ_COSP_monthly=n 
    4145LMDZ_COSP_daily=n 
     
    5963List=   (${R_IN}/ATM/LIMIT/AMIP.v20170419/interpol/${RESOL_ATM_XY}_eORCA1.2_gregorian/limit_${year}.nc, limit.nc),\ 
    6064        (${R_IN}/ATM/AEROSOLS/CMIP6/v1/${RESOL_ATM_XY}/L${RESOL_ATM_Z}/aerosols${year}_from_inca.nc,              aerosols${year}.nc),\ 
    61         (${R_IN}/ATM/OZONE/UReading/historical.v20160711/interpol/${RESOL_ATM_XY}/climoz_LMDZ_${year}.nc, climoz_LMDZ.nc),\ 
     65        (${R_IN}/ATM/OZONE/UReading/historical.v20160711.v2/interpol/${RESOL_ATM_XY}/climoz_LMDZ_${year}.nc, climoz_LMDZ.nc),\ 
    6266        (${R_IN}/ATM/SOLAR/CMIP6/v3.1corr/Historical/solarforcing_v3.1_daily_6bands_${year}.nc,        solarforcing.nc),\ 
    6367        (${R_IN}/ATM/STRATAERO/CMIP6/v3/${RESOL_ATM_XY}/L${RESOL_ATM_Z}/taulwstrat.2D.${year}.nc, taulwstrat.2D.nc),\ 
     
    6569 
    6670# Note: the SOLARANDVOLCANOES.txt is only used for LMDZ_Physics=AP and NPv3.2 (if ok_suntime_rrtm=n) 
     71# Add the following file for LMDZ_Physics=AP (${R_IN}/ATM/IPCC_AR5/HISTORIQUE/SOLARANDVOLCANOES_1610_2008.txt, SOLARANDVOLCANOES.txt) 
    6772ListNonDel= (${R_IN}/ATM/GHG/CMIP6/historical/CO2_CMIP6_0000_2014.txt, CO2.txt),\ 
    6873            (${R_IN}/ATM/GHG/CMIP6/historical/CH4_CMIP6_0000_2014.txt, CH4.txt),\ 
     
    7075            (${R_IN}/ATM/GHG/CMIP6/historical/CFC11eq_CMIP6_0000_2014.txt, CFC11.txt),\ 
    7176            (${R_IN}/ATM/GHG/CMIP6/historical/CFC12eq_CMIP6_0000_2014.txt, CFC12.txt),\ 
    72             (${R_IN}/ATM/IPCC_AR5/HISTORIQUE/SOLARANDVOLCANOES_1610_2008.txt, SOLARANDVOLCANOES.txt),\ 
    7377            (${R_IN}/ATM/AEROSOLS/CMIP6/v1/${RESOL_ATM_XY}/L${RESOL_ATM_Z}/aerosols1850_from_inca.nc, aerosols.nat.nc) 
    7478 
  • CONFIG/UNIFORM/v6/LMDZORINCA_v6/EXPERIMENTS/LMDZOR/amip_nudge/COMP/lmdz.card

    r3648 r3967  
    1111# LMDZ_Physics=NPv6.0.8 for new physics to be used with LMDZ5/trunk revision 2739 or later 
    1212# LMDZ_Physics=NPv6.0.15_T or NPv6.0.15_S to be used with LMDZ6/branches/IPSLCM6.0.15 rev 3224 
    13 LMDZ_Physics=NPv6.0.15_T 
     13# LMDZ_Physics=NPv6.1 to be used with LMDZ6/branches/IPSLCM6.0.15 rev 3301 
     14LMDZ_Physics=NPv6.1 
    1415 
    1516# Set ConfType to choose parameters for aerosols, solar and green house gazes. 
     
    2627ok_cdnc=y 
    2728 
     29# Set tau_gl depending on the forcing file for the sea-ice (use 2. for amip and 1. for hadisst) 
     30tau_gl=2. 
     31 
    2832# ByPass_hgardfou_teta=y : modify teta_ parameters for following CumulPeriod only 
    2933ByPass_hgardfou_teta=n 
     
    3741 
    3842# Set COSP activation and output frequency (monthly, daily, HF) = y/n 
    39 LMDZ_COSP_OK=n 
     43LMDZ_COSP_OK=y 
    4044LMDZ_COSP_monthly=n 
    4145LMDZ_COSP_daily=n 
     
    5963List=   (${R_IN}/ATM/LIMIT/AMIP.v20170419/interpol/${RESOL_ATM_XY}_eORCA1.2_gregorian/limit_${year}.nc, limit.nc),\ 
    6064        (${R_IN}/ATM/AEROSOLS/CMIP6/v1/${RESOL_ATM_XY}/L${RESOL_ATM_Z}/aerosols${year}_from_inca.nc,              aerosols${year}.nc),\ 
    61         (${R_IN}/ATM/OZONE/UReading/historical.v20160711/interpol/${RESOL_ATM_XY}/climoz_LMDZ_${year}.nc, climoz_LMDZ.nc),\ 
     65        (${R_IN}/ATM/OZONE/UReading/historical.v20160711.v2/interpol/${RESOL_ATM_XY}/climoz_LMDZ_${year}.nc, climoz_LMDZ.nc),\ 
    6266        (${R_IN}/ATM/SOLAR/CMIP6/v3.1corr/Historical/solarforcing_v3.1_daily_6bands_${year}.nc,        solarforcing.nc),\ 
    6367        (${R_IN}/ATM/STRATAERO/CMIP6/v3/${RESOL_ATM_XY}/L${RESOL_ATM_Z}/taulwstrat.2D.${year}.nc, taulwstrat.2D.nc),\ 
  • CONFIG/UNIFORM/v6/LMDZORINCA_v6/EXPERIMENTS/LMDZOR/clim_360d/COMP/lmdz.card

    r3648 r3967  
    1111# LMDZ_Physics=NPv6.0.8 for new physics to be used with LMDZ5/trunk revision 2739 or later 
    1212# LMDZ_Physics=NPv6.0.15_T or NPv6.0.15_S to be used with LMDZ6/branches/IPSLCM6.0.15 rev 3224 
    13 LMDZ_Physics=NPv6.0.15_T 
     13# LMDZ_Physics=NPv6.1 to be used with LMDZ6/branches/IPSLCM6.0.15 rev 3301 
     14LMDZ_Physics=NPv6.1 
     15 
    1416# Set ConfType to choose parameters for aerosols, solar and green house gazes. 
    1517# The parameter file PARAM/config.def_$ConfType will be used. 
     
    2527ok_cdnc=y 
    2628 
     29# Set tau_gl depending on the forcing file for the sea-ice (use 2. for amip and 1. for hadisst) 
     30tau_gl=2. 
     31 
    2732# ByPass_hgardfou_teta=y : modify teta_ parameters for following CumulPeriod only 
    2833ByPass_hgardfou_teta=n 
     
    3641 
    3742# Set COSP activation and output frequency (monthly, daily, HF) = y/n 
    38 LMDZ_COSP_OK=n 
     43LMDZ_COSP_OK=y 
    3944LMDZ_COSP_monthly=n 
    4045LMDZ_COSP_daily=n 
     
    5964            (${R_IN}/ATM/AEROSOLS/CMIP6/v1/${RESOL_ATM_XY}/L${RESOL_ATM_Z}/aerosols1850_from_inca.nc,   aerosols.nat.nc),\ 
    6065            (${R_IN}/ATM/AEROSOLS/CMIP6/v1/${RESOL_ATM_XY}/L${RESOL_ATM_Z}/aerosols1995_from_inca.nc,   aerosols1980.nc),\ 
    61             (${R_IN}/ATM/OZONE/UReading/historical.v20160711/interpol/${RESOL_ATM_XY}/climoz_LMDZ_1979_2008_clim.nc, climoz_LMDZ.nc),\ 
     66            (${R_IN}/ATM/OZONE/UReading/historical.v20160711.v2/interpol/${RESOL_ATM_XY}/climoz_LMDZ_1979_2008_clim.nc, climoz_LMDZ.nc),\ 
    6267            (${R_IN}/ATM/SOLAR/CMIP6/v3.1corr/Control/solarforcing_v3.1_pdControl_ave_6bands_360days.nc, solarforcing.nc),\ 
    6368            (${R_IN}/ATM/STRATAERO/CMIP6/v3/${RESOL_ATM_XY}/L${RESOL_ATM_Z}/taulwstrat.2D.ave.nc, taulwstrat.2D.nc),\ 
  • CONFIG/UNIFORM/v6/LMDZORINCA_v6/EXPERIMENTS/LMDZOR/clim_pdControl/COMP/lmdz.card

    r3648 r3967  
    1111# LMDZ_Physics=NPv6.0.8 for new physics to be used with LMDZ5/trunk revision 2739 or later 
    1212# LMDZ_Physics=NPv6.0.15_T or NPv6.0.15_S to be used with LMDZ6/branches/IPSLCM6.0.15 rev 3224 
    13 LMDZ_Physics=NPv6.0.15_T 
     13# LMDZ_Physics=NPv6.1 to be used with LMDZ6/branches/IPSLCM6.0.15 rev 3301 
     14LMDZ_Physics=NPv6.1 
    1415 
    1516# Set ConfType to choose parameters for aerosols, solar and green house gazes. 
     
    2627ok_cdnc=y 
    2728 
     29# Set tau_gl depending on the forcing file for the sea-ice (use 2. for amip and 1. for hadisst) 
     30tau_gl=2. 
     31 
    2832# ByPass_hgardfou_teta=y : modify teta_ parameters for following CumulPeriod only 
    2933ByPass_hgardfou_teta=n 
     
    3741 
    3842# Set COSP activation and output frequency (monthly, daily, HF) = y/n 
    39 LMDZ_COSP_OK=n 
     43LMDZ_COSP_OK=y 
    4044LMDZ_COSP_monthly=n 
    4145LMDZ_COSP_daily=n 
     
    6266ListNonDel= (${R_IN}/ATM/AEROSOLS/CMIP6/v1/${RESOL_ATM_XY}/L${RESOL_ATM_Z}/aerosols1850_from_inca.nc,   aerosols.nat.nc),\ 
    6367            (${R_IN}/ATM/AEROSOLS/CMIP6/v1/${RESOL_ATM_XY}/L${RESOL_ATM_Z}/aerosols1995_from_inca.nc,   aerosols1980.nc),\ 
    64             (${R_IN}/ATM/OZONE/UReading/historical.v20160711/interpol/${RESOL_ATM_XY}/climoz_LMDZ_1979_2008_clim.nc, climoz_LMDZ.nc),\ 
     68            (${R_IN}/ATM/OZONE/UReading/historical.v20160711.v2/interpol/${RESOL_ATM_XY}/climoz_LMDZ_1979_2008_clim.nc, climoz_LMDZ.nc),\ 
    6569            (${R_IN}/ATM/LIMIT/AMIP.v20170419/interpol/${RESOL_ATM_XY}_eORCA1.2_365d/limit_1979_2008_clim.nc, limit.nc),\ 
    6670            (${R_IN}/ATM/SOLAR/CMIP6/v3.1corr/Control/solarforcing_v3.1_pdControl_ave_6bands_365days.nc, solarforcing.nc),\ 
  • CONFIG/UNIFORM/v6/LMDZORINCA_v6/EXPERIMENTS/LMDZORINCA/AER/COMP/lmdz.card

    r3543 r3967  
    1111# LMDZ_Physics=NPv5.70 for new physics to be used with LMDZ5/testing revision 2595 or later 
    1212LMDZ_Physics=AP 
     13 
     14# Activate the call to phytrac to run tracer simulation  
     15iflag_phytrac=1 
    1316 
    1417# Use XIOS as output library 
  • CONFIG/UNIFORM/v6/LMDZORINCA_v6/EXPERIMENTS/LMDZORINCA/AER_historical/COMP/lmdz.card

    r3663 r3967  
    66# LMDZ_Physics=AP for standard/old physics(defalut), can be used with LMDZ4_AR5 or LMDZ5/trunk sources 
    77# LMDZ_Physics=NPv6.0.15_T or NPv6.0.15_S to be used with LMDZ6/branches/IPSLCM6.0.15 rev 3224 
    8 LMDZ_Physics=NPv6.0.15_T 
     8LMDZ_Physics=NPv6.1 
     9 
     10# Activate the call to phytrac to run tracer simulation  
     11iflag_phytrac=1 
    912 
    1013# Set ConfType to choose parameters for aerosols, solar and green house gazes. 
     
    5457[BoundaryFiles] 
    5558List=       (${R_IN}/ATM/LIMIT/AMIP.v20170419/interpol/${RESOL_ATM_XY}_eORCA1.2_gregorian/limit_${year}.nc, limit.nc),\ 
    56             (${R_IN}/ATM/OZONE/UReading/historical.v20160711/interpol/${RESOL_ATM_XY}/climoz_LMDZ_${year}.nc, climoz_LMDZ.nc),\ 
     59            (${R_IN}/ATM/OZONE/UReading/historical.v20160711.v2/interpol/${RESOL_ATM_XY}/climoz_LMDZ_${year}.nc, climoz_LMDZ.nc),\ 
    5760            (${R_IN}/ATM/SOLAR/CMIP6/v3.1corr/Historical/solarforcing_v3.1_daily_6bands_${year}.nc,        solarforcing.nc),\ 
    5861            (${R_IN}/ATM/STRATAERO/CMIP6/v3/${RESOL_ATM_XY}/L${RESOL_ATM_Z}/taulwstrat.2D.${year}.nc, taulwstrat.2D.nc),\ 
    5962            (${R_IN}/ATM/STRATAERO/CMIP6/v3/${RESOL_ATM_XY}/L${RESOL_ATM_Z}/tauswstrat.2D.${year}.nc, tauswstrat.2D.nc) 
    6063 
     64# Note: the SOLARANDVOLCANOES.txt is only used for LMDZ_Physics=AP and NPv3.2 (if ok_suntime_rrtm=n) 
     65# Add the following file for LMDZ_Physics=AP (${R_IN}/ATM/IPCC_AR5/HISTORIQUE/SOLARANDVOLCANOES_1610_2008.txt, SOLARANDVOLCANOES.txt) 
    6166ListNonDel= (${R_IN}/ATM/GHG/CMIP6/historical/CO2_CMIP6_0000_2014.txt, CO2.txt),\ 
    6267            (${R_IN}/ATM/GHG/CMIP6/historical/CH4_CMIP6_0000_2014.txt, CH4.txt),\ 
    6368            (${R_IN}/ATM/GHG/CMIP6/historical/N2O_CMIP6_0000_2014.txt, N2O.txt),\ 
    6469            (${R_IN}/ATM/GHG/CMIP6/historical/CFC11eq_CMIP6_0000_2014.txt, CFC11.txt),\ 
    65             (${R_IN}/ATM/GHG/CMIP6/historical/CFC12eq_CMIP6_0000_2014.txt, CFC12.txt),\ 
    66             (${R_IN}/ATM/IPCC_AR5/RCPs/SolarConstant/SOLAR_1765_2500.txt, SOLARANDVOLCANOES.txt) 
     70            (${R_IN}/ATM/GHG/CMIP6/historical/CFC12eq_CMIP6_0000_2014.txt, CFC12.txt) 
    6771 
    6872[SmoothFiles] 
  • CONFIG/UNIFORM/v6/LMDZORINCA_v6/EXPERIMENTS/LMDZORINCA/AER_pdControl/COMP/lmdz.card

    r3648 r3967  
    66# LMDZ_Physics=AP for standard/old physics(defalut), can be used with LMDZ4_AR5 or LMDZ5/trunk sources 
    77# LMDZ_Physics=NPv6.0.15_T or NPv6.0.15_S to be used with LMDZ6/branches/IPSLCM6.0.15 rev 3224 
    8 LMDZ_Physics=NPv6.0.15_T 
     8LMDZ_Physics=NPv6.1 
     9 
     10# Activate the call to phytrac to run tracer simulation  
     11iflag_phytrac=1 
    912 
    1013# Set ConfType to choose parameters for aerosols, solar and green house gazes. 
     
    5356List=() 
    5457ListNonDel= (${R_IN}/ATM/LIMIT/AMIP.v20170419/interpol/${RESOL_ATM_XY}_eORCA1.2_360d/limit_1979_2008_clim.nc, limit.nc),\ 
    55             (${R_IN}/ATM/OZONE/UReading/historical.v20160711/interpol/${RESOL_ATM_XY}/climoz_LMDZ_${year}.nc, climoz_LMDZ.nc),\ 
     58            (${R_IN}/ATM/OZONE/UReading/historical.v20160711.v2/interpol/${RESOL_ATM_XY}/climoz_LMDZ_${year}.nc, climoz_LMDZ.nc),\ 
    5659            (${R_IN}/ATM/SOLAR/CMIP6/v3.1corr/Control/solarforcing_v3.1_pdControl_ave_6bands_360days.nc, solarforcing.nc),\ 
    5760            (${R_IN}/ATM/STRATAERO/CMIP6/v3/${RESOL_ATM_XY}/L${RESOL_ATM_Z}/taulwstrat.2D.ave.nc, taulwstrat.2D.nc),\ 
  • CONFIG/UNIFORM/v6/LMDZORINCA_v6/EXPERIMENTS/LMDZORINCA/CREATE_erai/COMP/lmdz.card

    r3542 r3967  
    77# Physics package to use 
    88LMDZ_Physics=AP 
     9 
     10# Activate the call to phytrac to run tracer simulation  
     11iflag_phytrac=1 
    912 
    1013# Do not use XIOS with ce0l program 
  • CONFIG/UNIFORM/v6/LMDZORINCA_v6/EXPERIMENTS/LMDZORINCA/DUSS/COMP/lmdz.card

    r3543 r3967  
    1111# LMDZ_Physics=NPv5.70 for new physics to be used with LMDZ5/testing revision 2595 or later 
    1212LMDZ_Physics=AP 
     13 
     14# Activate the call to phytrac to run tracer simulation  
     15iflag_phytrac=1 
    1316 
    1417# Use XIOS as output library 
  • CONFIG/UNIFORM/v6/LMDZORINCA_v6/EXPERIMENTS/LMDZORINCA/GES/COMP/lmdz.card

    r3543 r3967  
    1111# LMDZ_Physics=NPv5.70 for new physics to be used with LMDZ5/testing revision 2595 or later 
    1212LMDZ_Physics=AP 
     13 
     14# Activate the call to phytrac to run tracer simulation  
     15iflag_phytrac=1 
    1316 
    1417# Use XIOS as output library 
  • CONFIG/UNIFORM/v6/LMDZORINCA_v6/EXPERIMENTS/LMDZORINCA/NMHC/COMP/lmdz.card

    r3543 r3967  
    1111# LMDZ_Physics=NPv5.70 for new physics to be used with LMDZ5/testing revision 2595 or later 
    1212LMDZ_Physics=AP 
     13 
     14# Activate the call to phytrac to run tracer simulation  
     15iflag_phytrac=1 
    1316 
    1417# Use XIOS as output library 
  • CONFIG/UNIFORM/v6/LMDZORINCA_v6/EXPERIMENTS/LMDZORINCA/NMHC_AER/COMP/lmdz.card

    r3543 r3967  
    1212# LMDZ_Physics=NPv5.80bz0 for new physics to be used with LMDZ5/trunk revision 2699 or later 
    1313LMDZ_Physics=AP 
     14 
     15# Activate the call to phytrac to run tracer simulation  
     16iflag_phytrac=1 
    1417 
    1518# Use XIOS as output library 
  • CONFIG/UNIFORM/v6/LMDZORINCA_v6/EXPERIMENTS/LMDZORINCA/NMHC_AER_S/COMP/lmdz.card

    r3897 r3967  
    1212# LMDZ_Physics=NPv5.80bz0 for new physics to be used with LMDZ5/trunk revision 2699 or later 
    1313LMDZ_Physics=AP 
     14 
     15# Activate the call to phytrac to run tracer simulation  
     16iflag_phytrac=1 
    1417 
    1518# Use XIOS as output library 
  • CONFIG/UNIFORM/v6/LMDZORINCA_v6/GENERAL/DRIVER/lmdz.driver

    r3897 r3967  
    159159    IGCM_comp_modifyDefFile nonblocker config.def solaire $value 
    160160 
     161    # Read value for eccentricity from file Eccentricity.txt. If file not existing, take DEFAULT value from file. 
     162    if [ -f Eccentricity.txt ] ; then 
     163        value=`grep Annee_${year} Eccentricity.txt | awk -F= '{print $2}'` 
     164        if [ X"${value}" = X ] ; then 
     165            # The grep returned empty variable, stop execution 
     166            IGCM_debug_Exit "The file Eccentricity.txt do not contain the current year." 
     167            IGCM_debug_Verif_Exit 
     168        fi 
     169    else 
     170        value=DEFAULT 
     171    fi 
     172    IGCM_comp_modifyDefFile nonblocker config.def R_ecc $value 
     173 
     174    # Read value for obliquity from file Obliquity.txt. If file not existing, take DEFAULT value from file. 
     175    if [ -f Obliquity.txt ] ; then 
     176        value=`grep Annee_${year} Obliquity.txt | awk -F= '{print $2}'` 
     177        if [ X"${value}" = X ] ; then 
     178            # The grep returned empty variable, stop execution 
     179            IGCM_debug_Exit "The file Obliquity.txt do not contain the current year." 
     180            IGCM_debug_Verif_Exit 
     181        fi 
     182    else 
     183        value=DEFAULT 
     184    fi 
     185    IGCM_comp_modifyDefFile nonblocker config.def R_incl $value 
     186 
     187    # Read value for perihelie from file Perihelie.txt. If file not existing, take DEFAULT value from file. 
     188    if [ -f Perihelie.txt ] ; then 
     189        value=`grep Annee_${year} Perihelie.txt | awk -F= '{print $2}'` 
     190        if [ X"${value}" = X ] ; then 
     191            # The grep returned empty variable, stop execution 
     192            IGCM_debug_Exit "The file Perihelie.txt do not contain the current year." 
     193            IGCM_debug_Verif_Exit 
     194        fi 
     195    else 
     196        value=DEFAULT 
     197    fi 
     198    IGCM_comp_modifyDefFile nonblocker config.def R_peri $value 
    161199 
    162200    # Read value for co2_ppm from file CO2.txt. If file not existing, take DEFAULT value from file.  
     
    349387    else 
    350388        echo "LMDZ is running in forced mode without ocean model, set type_ocean=force in run.def" 
    351         IGCM_comp_modifyDefFile blocker run.def type_ocean force 
     389        IGCM_comp_modifyDefFile nonblocker run.def type_ocean force 
    352390    fi 
    353391 
     
    366404 
    367405 
     406    # run.def : Activate the call to phytrac  
     407    if [ ! X${lmdz_UserChoices_iflag_phytrac} = X ]; then  
     408        IGCM_comp_modifyDefFile nonblocker run.def iflag_phytrac ${lmdz_UserChoices_iflag_phytrac} 
     409    else 
     410        IGCM_comp_modifyDefFile nonblocker run.def iflag_phytrac 0 
     411    fi  
     412 
     413    # physiq.def : Activate the call to phytrac  
     414    if [ ! X${lmdz_UserChoices_ok_bug_cv_trac} = X ]; then  
     415        IGCM_comp_modifyDefFile nonblocker physiq.def ok_bug_cv_trac  ${lmdz_UserChoices_ok_bug_cv_trac} 
     416    else 
     417        IGCM_comp_modifyDefFile nonblocker physiq.def ok_bug_cv_trac  n 
     418    fi  
     419 
    368420    # config.def : Activate direct radiative effect if ok_ade=y 
    369421    if [ ! X${lmdz_UserChoices_ok_ade} = X ]; then  
     
    432484    fi  
    433485 
     486    # physiq.def : Modify parameter tau_gl if it is set in lmdz.card 
     487    if [ ! X${lmdz_UserChoices_tau_gl} = X ]; then  
     488        IGCM_comp_modifyDefFile nonblocker physiq.def tau_gl ${lmdz_UserChoices_tau_gl} 
     489    else 
     490        # Take default value set in physiq.def 
     491        IGCM_comp_modifyDefFile nonblocker config.def tau_gl DEFAULT 
     492    fi 
     493    
     494 
    434495    # guide.def : Activate nudging if ok_guide=y set in lmdz.card 
    435496    if [ ! X${lmdz_UserChoices_ok_guide} = X ] ; then 
     
    438499        IGCM_comp_modifyDefFile nonblocker guide.def ok_guide n 
    439500    fi 
     501 
    440502 
    441503    ## Read ByPass_hgardfou_teta option in lmdz.card --> divide teta* by 2 if [ $ByPass_hgardfou_teta = 1 ] 
  • CONFIG/UNIFORM/v6/LMDZORINCA_v6/GENERAL/DRIVER/orchidee.driver

    r3648 r3967  
    5959    else 
    6060        IGCM_comp_modifyDefFile nonblocker orchidee.def VEGET_UPDATE 0Y 
     61    fi 
     62 
     63    # Set LAI_MAP in orchidee.def acording to value set in orchidee.card section UserChoices 
     64    # If LAI_MAP is not definded in orchidee.card, set default value n 
     65    # Note: this option is only read by ORCHIDEE if starting without restart files 
     66    if [ ! X${orchidee_UserChoices_LAI_MAP} = X ] ; then 
     67        IGCM_comp_modifyDefFile nonblocker orchidee.def LAI_MAP   ${orchidee_UserChoices_LAI_MAP} 
     68    else 
     69        IGCM_comp_modifyDefFile nonblocker orchidee.def LAI_MAP   DEFAULT 
     70    fi 
     71 
     72    # Set DO_WOOD_HARVEST in orchidee.def acording to value set in orchidee.card section UserChoices 
     73    # If DO_WOOD_HARVEST is not definded in orchidee.card, set default value y 
     74    if [ ! X${orchidee_UserChoices_DO_WOOD_HARVEST} = X ] ; then 
     75        IGCM_comp_modifyDefFile nonblocker orchidee.def DO_WOOD_HARVEST   ${orchidee_UserChoices_DO_WOOD_HARVEST} 
     76    else 
     77        IGCM_comp_modifyDefFile nonblocker orchidee.def DO_WOOD_HARVEST   DEFAULT 
    6178    fi 
    6279 
  • CONFIG/UNIFORM/v6/LMDZORINCA_v6/GENERAL/DRIVER/xios.driver

    r2694 r3967  
    1919    IGCM_comp_modifyXmlFile force iodef.xml using_server NONE true 
    2020 
     21# Activate 2nd server level for CMIP6 type experiments (CMIP6 workflow) 
     22    if [ X"$( echo ${config_UserChoices_ExpType} | grep CMIP6 )" != "X" ] ; then 
     23    IGCM_comp_modifyXmlFile force iodef.xml using_server2 NONE true 
     24    fi 
     25 
    2126    if [ -f namcouple ] ; then 
    2227        sed -e "s/2  LMDZ oceanx/3 LMDZ oceanx ${config_Executable_IOS[1]}/" namcouple > namcouple.tmp  
  • CONFIG/UNIFORM/v6/LMDZORINCA_v6/GENERAL/PARAM/config.def_actuel

    r3897 r3967  
    11##  Cycle diurne  ou non                  
    2 cycle_diurne=y 
     2iflag_cycle_diurne=1 
     3 
     4## Pas de temps de couplage (s).  
     5t_coupl=_AUTO_ 
     6 
    37##  Soil Model  ou non                
    48soil_model=y 
    5 ## Pas de temps de couplage (s). 
    6 t_coupl=_AUTO_ 
    79 
    810## Nombre  d'appels des routines de rayonnements ( par jour)                  
     
    1517# Parametres "orbitaux/ ere geologique" 
    1618# 
    17 ### R_ecc =      Excentricite 
    18 R_ecc = 0.016715 
    19 ### R_peri =     Equinoxe 
    20 R_peri = 102.7 
    21 ### R_incl =     Inclinaison 
    22 R_incl = 23.441 
    23 ### solaire =    Constante solaire 
    24 #solaire = _AUTO_ : DEFAULT = 1366.0896 
    25 solaire = _AUTO_ : DEFAULT = 1361.20  
     19### R_ecc =      Excentricite (lue dans Eccentricity.txt) 
     20R_ecc = _AUTO_: DEFAULT = 0.016715 
     21### R_peri =     Equinoxe (lue dans Perihelie.txt) 
     22R_peri = _AUTO_: DEFAULT = 102.7 
     23### R_incl =     Inclinaison (lue dans Obliquity.txt) 
     24R_incl = _AUTO_: DEFAULT = 23.441 
     25### solaire =    Constante solaire (lue dans SOLARANDVOLCANOES.txt) 
     26solaire = _AUTO_: DEFAULT = 1361.20 
    2627### constante solaire lue dans un fichier par defaut 
    2728ok_suntime_rrtm=y 
     
    2930# Taux gaz a effet de serre 
    3031# 
    31 ### co2_ppm =    taux CO2 en ppm, l'année 2000 forcage CMIP6 
    32 co2_ppm = _AUTO_: DEFAULT = 3.6912e+02 
     32### co2_ppm =    taux CO2 en ppm, l'année 1850 forcage CMIP6 
     33co2_ppm = _AUTO_: DEFAULT  = 2.8432e+02 
    3334### co2_ppm_per =    taux 4xCO2 en ppm (uniqument pour calcul des diags) 
    34 co2_ppm_per = _AUTO_: DEFAULT = 14.7648e+02 
    35 ### CH4_ppb =    taux CH4 en ppb, l'année 2000 forcage CMIP6 
    36 CH4_ppb = _AUTO_ : DEFAULT = 1.7780e+03 
    37 ### N2O_ppb =    taux N2O en ppb, l'année 2000 forcage CMIP6 
    38 N2O_ppb = _AUTO_ : DEFAULT = 3.1576e+02 
    39 ### CFC11_ppt = taux en ppt, l'année 2000 forcage CFC11eq_CMIP6 
    40 CFC11_ppt = _AUTO_ : DEFAULT = 6.3990e+01 
    41 ### CFC12_ppt =  taux en ppt, l'année 2000 forcage CFC12eq_CMIP6 
    42 CFC12_ppt = _AUTO_ : DEFAULT = 1.0511e+03 
     35co2_ppm_per = _AUTO_: DEFAULT  =11.3728e+02 
     36### CH4_ppb =    taux CH4 en ppb, l'année 1850 forcage CMIP6 
     37CH4_ppb = _AUTO_: DEFAULT = 8.0825e+02 
     38### N2O_ppb =    taux N2O en ppb, l'année 1850 forcage CMIP6 
     39N2O_ppb = _AUTO_: DEFAULT = 2.7302e+02 
     40### CFC11_ppt = taux en ppt, l'année 1850 forcage CFC11eq_CMIP6 
     41CFC11_ppt = _AUTO_: DEFAULT = 1.1726e+01 
     42### CFC12_ppt = taux en ppt, l'année 1850 forcage CFC12eq_CMIP6 
     43CFC12_ppt = _AUTO_: DEFAULT = 1.6513e+01 
    4344# 
    4445# Parametres effets directs/indirects des "aerosols" 
     
    4950ok_aie=_AUTO_ 
    5051### aer_type =   Aerosol variation type : actuel / preind / scenario / annuel 
    51 aer_type=actuel 
     52aer_type=preind 
    5253### aerosol coupling = online (y) or offline (n) 
    5354aerosol_couple=_AUTO_ 
     
    5657###  flag_aerosol = type of coupled aerosol, if aerosol offline  
    5758###  0 => no aerosol, 1 => sulfate only, 2 => bc only, 3 => pom only, 4 => seasalt only, 5 => dust only, 6 => all aerosol 
    58 flag_aerosol=_AUTO_  
     59flag_aerosol=_AUTO_ 
    5960### ok_cdnc=y/n   Cloud droplet number concentration 
    6061ok_cdnc=_AUTO_ 
     
    6970# 2: read two ozone climatologies, the average day and night climatology and the daylight climatology 
    7071read_climoz=_AUTO_ 
    71 #  
     72# 
    7273# Aerosols stratospheriques utilises par defaut  
     74# 
    7375flag_aerosol_strat=2 
    7476# 
    7577# COSP 
     78# 
    7679ok_cosp=_AUTO_ 
    77  
    78  
  • CONFIG/UNIFORM/v6/LMDZORINCA_v6/GENERAL/PARAM/iodef.xml

    r3542 r3967  
    1313  <context id="xios"> 
    1414 
    15     <variable_definition>        
    16       <variable id="optimal_buffer_size" type="string">performance</variable> 
    17       <variable id="buffer_size_factor" type="double">1.0</variable> 
    18       <variable id="min_buffer_size" type="int">10000000</variable> 
    19       <variable id="info_level"            type="int">1</variable> 
    20       <variable id="using_server"          type="bool">false</variable> 
    21       <variable id="using_oasis"           type="bool">false</variable> 
    22       <variable id="oasis_codes_id"        type="string" >LMDZ,oceanx</variable>         
     15    <variable_definition> 
     16         <variable_group id="server"> 
     17            <variable id="using_server2" type="bool">false</variable> 
     18            <variable id="ratio_server2" type="int">50</variable> 
     19         </variable_group> 
     20 
     21        <variable_group id="buffer"> 
     22            <variable id="optimal_buffer_size" type="string">performance</variable> 
     23            <variable id="buffer_size_factor" type="double">1.0</variable> 
     24            <variable id="min_buffer_size" type="int">10000000</variable> 
     25         </variable_group> 
     26 
     27        <variable_group id="parameters" > 
     28          <variable id="using_server" type="bool">false</variable> 
     29          <variable id="info_level" type="int">1</variable> 
     30          <variable id="print_file" type="bool">false</variable> 
     31          <variable id="using_oasis" type="bool">false</variable> 
     32          <variable id="oasis_codes_id" type="string" >LMDZ,oceanx</variable> 
     33        </variable_group> 
     34      <variable id="activate_non_distributed_transformation" type="bool">true</variable> 
     35      <variable id="recv_field_timeout" type="double">3000.0</variable> 
    2336    </variable_definition> 
    24      
     37 
    2538  </context> 
    2639 
  • CONFIG/UNIFORM/v6/LMDZORINCA_v6/GENERAL/PARAM/orchidee.def_CWRR

    r3648 r3967  
    8080NVM=15 
    8181PFT_TO_MTC=1,2,3,4,5,6,7,8,9,10,11,12,13,10,10 
    82 NAME__10='temperate C3           grass      ' 
    83 NAME__14='tropical  C3           grass      ' 
    84 NAME__15='boreal    C3           grass      ' 
     82PFT_NAME__10='temperate C3           grass      ' 
     83PFT_NAME__14='tropical  C3           grass      ' 
     84PFT_NAME__15='boreal    C3           grass      ' 
    8585 
    8686# STRESS_GS, STRESS_GM, STRESS_VCMAX : Stress on GS, GM and VCMAX 
     
    137137 
    138138# Activate harvest of wood 
    139 DO_WOOD_HARVEST=y 
     139DO_WOOD_HARVEST=_AUTO_ : DEFAULT=y 
    140140 
    141141# Growth respiration (default values except for PFT=14 and PFT=15) 
     
    190190VEGET_UPDATE = _AUTO_ 
    191191 
     192# Read lai map (default n) 
     193LAI_MAP = _AUTO_ : DEFAULT = n 
    192194 
    193195# Parameters related to surface and thermal physical properties 
  • CONFIG/UNIFORM/v6/LMDZORINCA_v6/GENERAL/PARAM/orchidee.def_Choi

    r3648 r3967  
    6464NVM=15 
    6565PFT_TO_MTC=1,2,3,4,5,6,7,8,9,10,11,12,13,10,10 
     66PFT_NAME__10='temperate C3           grass      ' 
     67PFT_NAME__14='tropical  C3           grass      ' 
     68PFT_NAME__15='boreal    C3           grass      ' 
    6669 
    6770# Set NVM and PFT_TO_MTC as follow to run with PFTmap files containing 13 pfts 
     
    8083VEGET_UPDATE = _AUTO_ 
    8184 
     85# Read lai map (default n) 
     86LAI_MAP = _AUTO_ : DEFAULT = n 
    8287 
    8388# Create river description file 
  • CONFIG/UNIFORM/v6/LMDZORINCA_v6/GENERAL/PARAM/run.def

    r3542 r3967  
    5454### Only read by ce0l : Do not set land points on Antartic 
    5555no_ter_antartique=y 
     56### Do not call phytrac to speed things up 
     57iflag_phytrac=_AUTO_: DEFAULT = 0 
    5658 
    57  
  • CONFIG/UNIFORM/v6/LMDZORINCA_v6/GENERAL/PARAM/traceur.def

    r3024 r3967  
    3310 10 H2Ol 
    4410 10 H2Oi 
    5 10 10 Aga 
     500 00 Aga 
  • CONFIG/UNIFORM/v6/LMDZORINCA_v6/GENERAL/POST/monitoring01_lmdz.cfg

    r3648 r3967  
    5858 od550aer_strat_forcing | "od550_STRAT"           | "" | "od550_STRAT[d=1]"        | "Aerosol optical depth at 550nm"         | "-"         | "aire[d=1]"    
    5959 od550lt1aer_forcing    | "od550lt1aer"           | "" | "od550lt1aer[d=1]"        | "Fine mode optical depth"                | "-"         | "aire[d=1]"    
    60  topswai_forcing        | "topswai"               | "" | "topswai[d=1]"            | "AIE at TOA"                             | "W/m^2" | "aire[d=1]" 
    61  solswai_forcing        | "solswai"               | "" | "solswai[d=1]"            | "AIE at SRF"                             | "W/m^2" | "aire[d=1]" 
    62  topswad_forcing        | "topswad"               | "" | "topswad[d=1]"            | "ADE at TOA"                             | "W/m^2" | "aire[d=1]" 
    63  solswad_forcing        | "solswad"               | "" | "solswad[d=1]"            | "ADE at SRF"                             | "W/m^2" | "aire[d=1]"  
    6460 tro3_strato_forcing_DU | "colO3_strat"           | "" | "colO3_strat[x=@ave,y=@ave,d=1]"     | "colonne ozone strato" | "DU" | "" 
    6561 tro3_tropo_forcing_DU  | "colO3_trop"            | "" | "colO3_trop[x=@ave,y=@ave,d=1]"      | "colonne ozone trop"   | "DU" | "" 
Note: See TracChangeset for help on using the changeset viewer.