Changeset 3967 for CONFIG/UNIFORM/v6
- Timestamp:
- 07/10/18 14:53:09 (6 years ago)
- Location:
- CONFIG/UNIFORM/v6/LMDZORINCA_v6
- Files:
-
- 4 added
- 24 edited
Legend:
- Unmodified
- Added
- Removed
-
CONFIG/UNIFORM/v6/LMDZORINCA_v6/EXPERIMENTS/LMDZ/CREATE_amip/COMP/lmdz.card
r3542 r3967 6 6 [UserChoices] 7 7 # Physics package to use 8 LMDZ_Physics=NPv6. 0.118 LMDZ_Physics=NPv6.1 9 9 10 10 # Manage radiative aerosol effect and ozone … … 13 13 ok_aie=y 14 14 aerosol_couple=n 15 read_climoz=2 15 # read_climoz : interpolation of ozone files. 16 # Use read_climoz=1 for CMIP6 ozone files, 2 for CMIP5 ozone files and 0 for no interpolation 17 # LMDZ6/trunk revision 3281 or later is needed for read_climoz=1 (not included in branche IPSLCM6.0.15) 18 read_climoz=0 19 16 20 ok_cdnc=y 17 21 … … 20 24 21 25 [BoundaryFiles] 22 List= (${R_IN}/ATM/LIMIT/AMIP.v20170419/original/360x180/BCS/amipbc_sst_360x180_${year}.nc, amipbc_sst_1x1.nc), \ 23 (${R_IN}/ATM/LIMIT/AMIP.v20170419/original/360x180/BCS/amipbc_sst_360x180_${year_m1}.nc, amipbc_sst_1x1_m.nc), \ 24 (${R_IN}/ATM/LIMIT/AMIP.v20170419/original/360x180/BCS/amipbc_sst_360x180_${year_p1}.nc, amipbc_sst_1x1_p.nc), \ 25 (${R_IN}/ATM/LIMIT/AMIP.v20170419/original/360x180/BCS/amipbc_sic_360x180_${year}.nc, amipbc_sic_1x1.nc), \ 26 (${R_IN}/ATM/LIMIT/AMIP.v20170419/original/360x180/BCS/amipbc_sic_360x180_${year_m1}.nc, amipbc_sic_1x1_m.nc), \ 27 (${R_IN}/ATM/LIMIT/AMIP.v20170419/original/360x180/BCS/amipbc_sic_360x180_${year_p1}.nc, amipbc_sic_1x1_p.nc), \ 28 (${R_IN}/ATM/Ozone/HYBRIDE/v2.clim/tro3_${year}.new.nc, climoz.nc) 26 List= (${R_IN}/ATM/LIMIT/AMIP.v20180427/original/360x180/BCS/amipbc_sst_360x180_${year}.nc, amipbc_sst_1x1.nc), \ 27 (${R_IN}/ATM/LIMIT/AMIP.v20180427/original/360x180/BCS/amipbc_sst_360x180_${year_m1}.nc, amipbc_sst_1x1_m.nc), \ 28 (${R_IN}/ATM/LIMIT/AMIP.v20180427/original/360x180/BCS/amipbc_sst_360x180_${year_p1}.nc, amipbc_sst_1x1_p.nc), \ 29 (${R_IN}/ATM/LIMIT/AMIP.v20180427/original/360x180/BCS/amipbc_sic_360x180_${year}.nc, amipbc_sic_1x1.nc), \ 30 (${R_IN}/ATM/LIMIT/AMIP.v20180427/original/360x180/BCS/amipbc_sic_360x180_${year_m1}.nc, amipbc_sic_1x1_m.nc), \ 31 (${R_IN}/ATM/LIMIT/AMIP.v20180427/original/360x180/BCS/amipbc_sic_360x180_${year_p1}.nc, amipbc_sic_1x1_p.nc), \ 32 (${R_IN}/ATM/OZONE/UReading/historical.v20160711.v2/original/144x96x66/tro3_${year_m1}.nc, climoz_m.nc), \ 33 (${R_IN}/ATM/OZONE/UReading/historical.v20160711.v2/original/144x96x66/tro3_${year}.nc, climoz.nc), \ 34 (${R_IN}/ATM/OZONE/UReading/historical.v20160711.v2/original/144x96x66/tro3_${year_p1}.nc, climoz_p.nc) 29 35 30 36 ListNonDel= (${R_IN}/ATM/Albedo.nc, .), \ -
CONFIG/UNIFORM/v6/LMDZORINCA_v6/EXPERIMENTS/LMDZOR/amip/COMP/lmdz.card
r3648 r3967 11 11 # LMDZ_Physics=NPv6.0.8 for new physics to be used with LMDZ5/trunk revision 2739 or later 12 12 # LMDZ_Physics=NPv6.0.15_T or NPv6.0.15_S to be used with LMDZ6/branches/IPSLCM6.0.15 rev 3224 13 LMDZ_Physics=NPv6.0.15_T 13 # LMDZ_Physics=NPv6.1 to be used with LMDZ6/branches/IPSLCM6.0.15 rev 3301 14 LMDZ_Physics=NPv6.1 14 15 15 16 # Set ConfType to choose parameters for aerosols, solar and green house gazes. … … 26 27 ok_cdnc=y 27 28 29 # Set tau_gl depending on the forcing file for the sea-ice (use 2. for amip and 1. for hadisst) 30 tau_gl=2. 31 28 32 # ByPass_hgardfou_teta=y : modify teta_ parameters for following CumulPeriod only 29 33 ByPass_hgardfou_teta=n … … 37 41 38 42 # Set COSP activation and output frequency (monthly, daily, HF) = y/n 39 LMDZ_COSP_OK= n43 LMDZ_COSP_OK=y 40 44 LMDZ_COSP_monthly=n 41 45 LMDZ_COSP_daily=n … … 59 63 List= (${R_IN}/ATM/LIMIT/AMIP.v20170419/interpol/${RESOL_ATM_XY}_eORCA1.2_gregorian/limit_${year}.nc, limit.nc),\ 60 64 (${R_IN}/ATM/AEROSOLS/CMIP6/v1/${RESOL_ATM_XY}/L${RESOL_ATM_Z}/aerosols${year}_from_inca.nc, aerosols${year}.nc),\ 61 (${R_IN}/ATM/OZONE/UReading/historical.v20160711 /interpol/${RESOL_ATM_XY}/climoz_LMDZ_${year}.nc, climoz_LMDZ.nc),\65 (${R_IN}/ATM/OZONE/UReading/historical.v20160711.v2/interpol/${RESOL_ATM_XY}/climoz_LMDZ_${year}.nc, climoz_LMDZ.nc),\ 62 66 (${R_IN}/ATM/SOLAR/CMIP6/v3.1corr/Historical/solarforcing_v3.1_daily_6bands_${year}.nc, solarforcing.nc),\ 63 67 (${R_IN}/ATM/STRATAERO/CMIP6/v3/${RESOL_ATM_XY}/L${RESOL_ATM_Z}/taulwstrat.2D.${year}.nc, taulwstrat.2D.nc),\ … … 65 69 66 70 # Note: the SOLARANDVOLCANOES.txt is only used for LMDZ_Physics=AP and NPv3.2 (if ok_suntime_rrtm=n) 71 # Add the following file for LMDZ_Physics=AP (${R_IN}/ATM/IPCC_AR5/HISTORIQUE/SOLARANDVOLCANOES_1610_2008.txt, SOLARANDVOLCANOES.txt) 67 72 ListNonDel= (${R_IN}/ATM/GHG/CMIP6/historical/CO2_CMIP6_0000_2014.txt, CO2.txt),\ 68 73 (${R_IN}/ATM/GHG/CMIP6/historical/CH4_CMIP6_0000_2014.txt, CH4.txt),\ … … 70 75 (${R_IN}/ATM/GHG/CMIP6/historical/CFC11eq_CMIP6_0000_2014.txt, CFC11.txt),\ 71 76 (${R_IN}/ATM/GHG/CMIP6/historical/CFC12eq_CMIP6_0000_2014.txt, CFC12.txt),\ 72 (${R_IN}/ATM/IPCC_AR5/HISTORIQUE/SOLARANDVOLCANOES_1610_2008.txt, SOLARANDVOLCANOES.txt),\73 77 (${R_IN}/ATM/AEROSOLS/CMIP6/v1/${RESOL_ATM_XY}/L${RESOL_ATM_Z}/aerosols1850_from_inca.nc, aerosols.nat.nc) 74 78 -
CONFIG/UNIFORM/v6/LMDZORINCA_v6/EXPERIMENTS/LMDZOR/amip_nudge/COMP/lmdz.card
r3648 r3967 11 11 # LMDZ_Physics=NPv6.0.8 for new physics to be used with LMDZ5/trunk revision 2739 or later 12 12 # LMDZ_Physics=NPv6.0.15_T or NPv6.0.15_S to be used with LMDZ6/branches/IPSLCM6.0.15 rev 3224 13 LMDZ_Physics=NPv6.0.15_T 13 # LMDZ_Physics=NPv6.1 to be used with LMDZ6/branches/IPSLCM6.0.15 rev 3301 14 LMDZ_Physics=NPv6.1 14 15 15 16 # Set ConfType to choose parameters for aerosols, solar and green house gazes. … … 26 27 ok_cdnc=y 27 28 29 # Set tau_gl depending on the forcing file for the sea-ice (use 2. for amip and 1. for hadisst) 30 tau_gl=2. 31 28 32 # ByPass_hgardfou_teta=y : modify teta_ parameters for following CumulPeriod only 29 33 ByPass_hgardfou_teta=n … … 37 41 38 42 # Set COSP activation and output frequency (monthly, daily, HF) = y/n 39 LMDZ_COSP_OK= n43 LMDZ_COSP_OK=y 40 44 LMDZ_COSP_monthly=n 41 45 LMDZ_COSP_daily=n … … 59 63 List= (${R_IN}/ATM/LIMIT/AMIP.v20170419/interpol/${RESOL_ATM_XY}_eORCA1.2_gregorian/limit_${year}.nc, limit.nc),\ 60 64 (${R_IN}/ATM/AEROSOLS/CMIP6/v1/${RESOL_ATM_XY}/L${RESOL_ATM_Z}/aerosols${year}_from_inca.nc, aerosols${year}.nc),\ 61 (${R_IN}/ATM/OZONE/UReading/historical.v20160711 /interpol/${RESOL_ATM_XY}/climoz_LMDZ_${year}.nc, climoz_LMDZ.nc),\65 (${R_IN}/ATM/OZONE/UReading/historical.v20160711.v2/interpol/${RESOL_ATM_XY}/climoz_LMDZ_${year}.nc, climoz_LMDZ.nc),\ 62 66 (${R_IN}/ATM/SOLAR/CMIP6/v3.1corr/Historical/solarforcing_v3.1_daily_6bands_${year}.nc, solarforcing.nc),\ 63 67 (${R_IN}/ATM/STRATAERO/CMIP6/v3/${RESOL_ATM_XY}/L${RESOL_ATM_Z}/taulwstrat.2D.${year}.nc, taulwstrat.2D.nc),\ -
CONFIG/UNIFORM/v6/LMDZORINCA_v6/EXPERIMENTS/LMDZOR/clim_360d/COMP/lmdz.card
r3648 r3967 11 11 # LMDZ_Physics=NPv6.0.8 for new physics to be used with LMDZ5/trunk revision 2739 or later 12 12 # LMDZ_Physics=NPv6.0.15_T or NPv6.0.15_S to be used with LMDZ6/branches/IPSLCM6.0.15 rev 3224 13 LMDZ_Physics=NPv6.0.15_T 13 # LMDZ_Physics=NPv6.1 to be used with LMDZ6/branches/IPSLCM6.0.15 rev 3301 14 LMDZ_Physics=NPv6.1 15 14 16 # Set ConfType to choose parameters for aerosols, solar and green house gazes. 15 17 # The parameter file PARAM/config.def_$ConfType will be used. … … 25 27 ok_cdnc=y 26 28 29 # Set tau_gl depending on the forcing file for the sea-ice (use 2. for amip and 1. for hadisst) 30 tau_gl=2. 31 27 32 # ByPass_hgardfou_teta=y : modify teta_ parameters for following CumulPeriod only 28 33 ByPass_hgardfou_teta=n … … 36 41 37 42 # Set COSP activation and output frequency (monthly, daily, HF) = y/n 38 LMDZ_COSP_OK= n43 LMDZ_COSP_OK=y 39 44 LMDZ_COSP_monthly=n 40 45 LMDZ_COSP_daily=n … … 59 64 (${R_IN}/ATM/AEROSOLS/CMIP6/v1/${RESOL_ATM_XY}/L${RESOL_ATM_Z}/aerosols1850_from_inca.nc, aerosols.nat.nc),\ 60 65 (${R_IN}/ATM/AEROSOLS/CMIP6/v1/${RESOL_ATM_XY}/L${RESOL_ATM_Z}/aerosols1995_from_inca.nc, aerosols1980.nc),\ 61 (${R_IN}/ATM/OZONE/UReading/historical.v20160711 /interpol/${RESOL_ATM_XY}/climoz_LMDZ_1979_2008_clim.nc, climoz_LMDZ.nc),\66 (${R_IN}/ATM/OZONE/UReading/historical.v20160711.v2/interpol/${RESOL_ATM_XY}/climoz_LMDZ_1979_2008_clim.nc, climoz_LMDZ.nc),\ 62 67 (${R_IN}/ATM/SOLAR/CMIP6/v3.1corr/Control/solarforcing_v3.1_pdControl_ave_6bands_360days.nc, solarforcing.nc),\ 63 68 (${R_IN}/ATM/STRATAERO/CMIP6/v3/${RESOL_ATM_XY}/L${RESOL_ATM_Z}/taulwstrat.2D.ave.nc, taulwstrat.2D.nc),\ -
CONFIG/UNIFORM/v6/LMDZORINCA_v6/EXPERIMENTS/LMDZOR/clim_pdControl/COMP/lmdz.card
r3648 r3967 11 11 # LMDZ_Physics=NPv6.0.8 for new physics to be used with LMDZ5/trunk revision 2739 or later 12 12 # LMDZ_Physics=NPv6.0.15_T or NPv6.0.15_S to be used with LMDZ6/branches/IPSLCM6.0.15 rev 3224 13 LMDZ_Physics=NPv6.0.15_T 13 # LMDZ_Physics=NPv6.1 to be used with LMDZ6/branches/IPSLCM6.0.15 rev 3301 14 LMDZ_Physics=NPv6.1 14 15 15 16 # Set ConfType to choose parameters for aerosols, solar and green house gazes. … … 26 27 ok_cdnc=y 27 28 29 # Set tau_gl depending on the forcing file for the sea-ice (use 2. for amip and 1. for hadisst) 30 tau_gl=2. 31 28 32 # ByPass_hgardfou_teta=y : modify teta_ parameters for following CumulPeriod only 29 33 ByPass_hgardfou_teta=n … … 37 41 38 42 # Set COSP activation and output frequency (monthly, daily, HF) = y/n 39 LMDZ_COSP_OK= n43 LMDZ_COSP_OK=y 40 44 LMDZ_COSP_monthly=n 41 45 LMDZ_COSP_daily=n … … 62 66 ListNonDel= (${R_IN}/ATM/AEROSOLS/CMIP6/v1/${RESOL_ATM_XY}/L${RESOL_ATM_Z}/aerosols1850_from_inca.nc, aerosols.nat.nc),\ 63 67 (${R_IN}/ATM/AEROSOLS/CMIP6/v1/${RESOL_ATM_XY}/L${RESOL_ATM_Z}/aerosols1995_from_inca.nc, aerosols1980.nc),\ 64 (${R_IN}/ATM/OZONE/UReading/historical.v20160711 /interpol/${RESOL_ATM_XY}/climoz_LMDZ_1979_2008_clim.nc, climoz_LMDZ.nc),\68 (${R_IN}/ATM/OZONE/UReading/historical.v20160711.v2/interpol/${RESOL_ATM_XY}/climoz_LMDZ_1979_2008_clim.nc, climoz_LMDZ.nc),\ 65 69 (${R_IN}/ATM/LIMIT/AMIP.v20170419/interpol/${RESOL_ATM_XY}_eORCA1.2_365d/limit_1979_2008_clim.nc, limit.nc),\ 66 70 (${R_IN}/ATM/SOLAR/CMIP6/v3.1corr/Control/solarforcing_v3.1_pdControl_ave_6bands_365days.nc, solarforcing.nc),\ -
CONFIG/UNIFORM/v6/LMDZORINCA_v6/EXPERIMENTS/LMDZORINCA/AER/COMP/lmdz.card
r3543 r3967 11 11 # LMDZ_Physics=NPv5.70 for new physics to be used with LMDZ5/testing revision 2595 or later 12 12 LMDZ_Physics=AP 13 14 # Activate the call to phytrac to run tracer simulation 15 iflag_phytrac=1 13 16 14 17 # Use XIOS as output library -
CONFIG/UNIFORM/v6/LMDZORINCA_v6/EXPERIMENTS/LMDZORINCA/AER_historical/COMP/lmdz.card
r3663 r3967 6 6 # LMDZ_Physics=AP for standard/old physics(defalut), can be used with LMDZ4_AR5 or LMDZ5/trunk sources 7 7 # LMDZ_Physics=NPv6.0.15_T or NPv6.0.15_S to be used with LMDZ6/branches/IPSLCM6.0.15 rev 3224 8 LMDZ_Physics=NPv6.0.15_T 8 LMDZ_Physics=NPv6.1 9 10 # Activate the call to phytrac to run tracer simulation 11 iflag_phytrac=1 9 12 10 13 # Set ConfType to choose parameters for aerosols, solar and green house gazes. … … 54 57 [BoundaryFiles] 55 58 List= (${R_IN}/ATM/LIMIT/AMIP.v20170419/interpol/${RESOL_ATM_XY}_eORCA1.2_gregorian/limit_${year}.nc, limit.nc),\ 56 (${R_IN}/ATM/OZONE/UReading/historical.v20160711 /interpol/${RESOL_ATM_XY}/climoz_LMDZ_${year}.nc, climoz_LMDZ.nc),\59 (${R_IN}/ATM/OZONE/UReading/historical.v20160711.v2/interpol/${RESOL_ATM_XY}/climoz_LMDZ_${year}.nc, climoz_LMDZ.nc),\ 57 60 (${R_IN}/ATM/SOLAR/CMIP6/v3.1corr/Historical/solarforcing_v3.1_daily_6bands_${year}.nc, solarforcing.nc),\ 58 61 (${R_IN}/ATM/STRATAERO/CMIP6/v3/${RESOL_ATM_XY}/L${RESOL_ATM_Z}/taulwstrat.2D.${year}.nc, taulwstrat.2D.nc),\ 59 62 (${R_IN}/ATM/STRATAERO/CMIP6/v3/${RESOL_ATM_XY}/L${RESOL_ATM_Z}/tauswstrat.2D.${year}.nc, tauswstrat.2D.nc) 60 63 64 # Note: the SOLARANDVOLCANOES.txt is only used for LMDZ_Physics=AP and NPv3.2 (if ok_suntime_rrtm=n) 65 # Add the following file for LMDZ_Physics=AP (${R_IN}/ATM/IPCC_AR5/HISTORIQUE/SOLARANDVOLCANOES_1610_2008.txt, SOLARANDVOLCANOES.txt) 61 66 ListNonDel= (${R_IN}/ATM/GHG/CMIP6/historical/CO2_CMIP6_0000_2014.txt, CO2.txt),\ 62 67 (${R_IN}/ATM/GHG/CMIP6/historical/CH4_CMIP6_0000_2014.txt, CH4.txt),\ 63 68 (${R_IN}/ATM/GHG/CMIP6/historical/N2O_CMIP6_0000_2014.txt, N2O.txt),\ 64 69 (${R_IN}/ATM/GHG/CMIP6/historical/CFC11eq_CMIP6_0000_2014.txt, CFC11.txt),\ 65 (${R_IN}/ATM/GHG/CMIP6/historical/CFC12eq_CMIP6_0000_2014.txt, CFC12.txt),\ 66 (${R_IN}/ATM/IPCC_AR5/RCPs/SolarConstant/SOLAR_1765_2500.txt, SOLARANDVOLCANOES.txt) 70 (${R_IN}/ATM/GHG/CMIP6/historical/CFC12eq_CMIP6_0000_2014.txt, CFC12.txt) 67 71 68 72 [SmoothFiles] -
CONFIG/UNIFORM/v6/LMDZORINCA_v6/EXPERIMENTS/LMDZORINCA/AER_pdControl/COMP/lmdz.card
r3648 r3967 6 6 # LMDZ_Physics=AP for standard/old physics(defalut), can be used with LMDZ4_AR5 or LMDZ5/trunk sources 7 7 # LMDZ_Physics=NPv6.0.15_T or NPv6.0.15_S to be used with LMDZ6/branches/IPSLCM6.0.15 rev 3224 8 LMDZ_Physics=NPv6.0.15_T 8 LMDZ_Physics=NPv6.1 9 10 # Activate the call to phytrac to run tracer simulation 11 iflag_phytrac=1 9 12 10 13 # Set ConfType to choose parameters for aerosols, solar and green house gazes. … … 53 56 List=() 54 57 ListNonDel= (${R_IN}/ATM/LIMIT/AMIP.v20170419/interpol/${RESOL_ATM_XY}_eORCA1.2_360d/limit_1979_2008_clim.nc, limit.nc),\ 55 (${R_IN}/ATM/OZONE/UReading/historical.v20160711/interpol/${RESOL_ATM_XY}/climoz_LMDZ_${year}.nc, climoz_LMDZ.nc),\58 (${R_IN}/ATM/OZONE/UReading/historical.v20160711.v2/interpol/${RESOL_ATM_XY}/climoz_LMDZ_${year}.nc, climoz_LMDZ.nc),\ 56 59 (${R_IN}/ATM/SOLAR/CMIP6/v3.1corr/Control/solarforcing_v3.1_pdControl_ave_6bands_360days.nc, solarforcing.nc),\ 57 60 (${R_IN}/ATM/STRATAERO/CMIP6/v3/${RESOL_ATM_XY}/L${RESOL_ATM_Z}/taulwstrat.2D.ave.nc, taulwstrat.2D.nc),\ -
CONFIG/UNIFORM/v6/LMDZORINCA_v6/EXPERIMENTS/LMDZORINCA/CREATE_erai/COMP/lmdz.card
r3542 r3967 7 7 # Physics package to use 8 8 LMDZ_Physics=AP 9 10 # Activate the call to phytrac to run tracer simulation 11 iflag_phytrac=1 9 12 10 13 # Do not use XIOS with ce0l program -
CONFIG/UNIFORM/v6/LMDZORINCA_v6/EXPERIMENTS/LMDZORINCA/DUSS/COMP/lmdz.card
r3543 r3967 11 11 # LMDZ_Physics=NPv5.70 for new physics to be used with LMDZ5/testing revision 2595 or later 12 12 LMDZ_Physics=AP 13 14 # Activate the call to phytrac to run tracer simulation 15 iflag_phytrac=1 13 16 14 17 # Use XIOS as output library -
CONFIG/UNIFORM/v6/LMDZORINCA_v6/EXPERIMENTS/LMDZORINCA/GES/COMP/lmdz.card
r3543 r3967 11 11 # LMDZ_Physics=NPv5.70 for new physics to be used with LMDZ5/testing revision 2595 or later 12 12 LMDZ_Physics=AP 13 14 # Activate the call to phytrac to run tracer simulation 15 iflag_phytrac=1 13 16 14 17 # Use XIOS as output library -
CONFIG/UNIFORM/v6/LMDZORINCA_v6/EXPERIMENTS/LMDZORINCA/NMHC/COMP/lmdz.card
r3543 r3967 11 11 # LMDZ_Physics=NPv5.70 for new physics to be used with LMDZ5/testing revision 2595 or later 12 12 LMDZ_Physics=AP 13 14 # Activate the call to phytrac to run tracer simulation 15 iflag_phytrac=1 13 16 14 17 # Use XIOS as output library -
CONFIG/UNIFORM/v6/LMDZORINCA_v6/EXPERIMENTS/LMDZORINCA/NMHC_AER/COMP/lmdz.card
r3543 r3967 12 12 # LMDZ_Physics=NPv5.80bz0 for new physics to be used with LMDZ5/trunk revision 2699 or later 13 13 LMDZ_Physics=AP 14 15 # Activate the call to phytrac to run tracer simulation 16 iflag_phytrac=1 14 17 15 18 # Use XIOS as output library -
CONFIG/UNIFORM/v6/LMDZORINCA_v6/EXPERIMENTS/LMDZORINCA/NMHC_AER_S/COMP/lmdz.card
r3897 r3967 12 12 # LMDZ_Physics=NPv5.80bz0 for new physics to be used with LMDZ5/trunk revision 2699 or later 13 13 LMDZ_Physics=AP 14 15 # Activate the call to phytrac to run tracer simulation 16 iflag_phytrac=1 14 17 15 18 # Use XIOS as output library -
CONFIG/UNIFORM/v6/LMDZORINCA_v6/GENERAL/DRIVER/lmdz.driver
r3897 r3967 159 159 IGCM_comp_modifyDefFile nonblocker config.def solaire $value 160 160 161 # Read value for eccentricity from file Eccentricity.txt. If file not existing, take DEFAULT value from file. 162 if [ -f Eccentricity.txt ] ; then 163 value=`grep Annee_${year} Eccentricity.txt | awk -F= '{print $2}'` 164 if [ X"${value}" = X ] ; then 165 # The grep returned empty variable, stop execution 166 IGCM_debug_Exit "The file Eccentricity.txt do not contain the current year." 167 IGCM_debug_Verif_Exit 168 fi 169 else 170 value=DEFAULT 171 fi 172 IGCM_comp_modifyDefFile nonblocker config.def R_ecc $value 173 174 # Read value for obliquity from file Obliquity.txt. If file not existing, take DEFAULT value from file. 175 if [ -f Obliquity.txt ] ; then 176 value=`grep Annee_${year} Obliquity.txt | awk -F= '{print $2}'` 177 if [ X"${value}" = X ] ; then 178 # The grep returned empty variable, stop execution 179 IGCM_debug_Exit "The file Obliquity.txt do not contain the current year." 180 IGCM_debug_Verif_Exit 181 fi 182 else 183 value=DEFAULT 184 fi 185 IGCM_comp_modifyDefFile nonblocker config.def R_incl $value 186 187 # Read value for perihelie from file Perihelie.txt. If file not existing, take DEFAULT value from file. 188 if [ -f Perihelie.txt ] ; then 189 value=`grep Annee_${year} Perihelie.txt | awk -F= '{print $2}'` 190 if [ X"${value}" = X ] ; then 191 # The grep returned empty variable, stop execution 192 IGCM_debug_Exit "The file Perihelie.txt do not contain the current year." 193 IGCM_debug_Verif_Exit 194 fi 195 else 196 value=DEFAULT 197 fi 198 IGCM_comp_modifyDefFile nonblocker config.def R_peri $value 161 199 162 200 # Read value for co2_ppm from file CO2.txt. If file not existing, take DEFAULT value from file. … … 349 387 else 350 388 echo "LMDZ is running in forced mode without ocean model, set type_ocean=force in run.def" 351 IGCM_comp_modifyDefFile blocker run.def type_ocean force389 IGCM_comp_modifyDefFile nonblocker run.def type_ocean force 352 390 fi 353 391 … … 366 404 367 405 406 # run.def : Activate the call to phytrac 407 if [ ! X${lmdz_UserChoices_iflag_phytrac} = X ]; then 408 IGCM_comp_modifyDefFile nonblocker run.def iflag_phytrac ${lmdz_UserChoices_iflag_phytrac} 409 else 410 IGCM_comp_modifyDefFile nonblocker run.def iflag_phytrac 0 411 fi 412 413 # physiq.def : Activate the call to phytrac 414 if [ ! X${lmdz_UserChoices_ok_bug_cv_trac} = X ]; then 415 IGCM_comp_modifyDefFile nonblocker physiq.def ok_bug_cv_trac ${lmdz_UserChoices_ok_bug_cv_trac} 416 else 417 IGCM_comp_modifyDefFile nonblocker physiq.def ok_bug_cv_trac n 418 fi 419 368 420 # config.def : Activate direct radiative effect if ok_ade=y 369 421 if [ ! X${lmdz_UserChoices_ok_ade} = X ]; then … … 432 484 fi 433 485 486 # physiq.def : Modify parameter tau_gl if it is set in lmdz.card 487 if [ ! X${lmdz_UserChoices_tau_gl} = X ]; then 488 IGCM_comp_modifyDefFile nonblocker physiq.def tau_gl ${lmdz_UserChoices_tau_gl} 489 else 490 # Take default value set in physiq.def 491 IGCM_comp_modifyDefFile nonblocker config.def tau_gl DEFAULT 492 fi 493 494 434 495 # guide.def : Activate nudging if ok_guide=y set in lmdz.card 435 496 if [ ! X${lmdz_UserChoices_ok_guide} = X ] ; then … … 438 499 IGCM_comp_modifyDefFile nonblocker guide.def ok_guide n 439 500 fi 501 440 502 441 503 ## Read ByPass_hgardfou_teta option in lmdz.card --> divide teta* by 2 if [ $ByPass_hgardfou_teta = 1 ] -
CONFIG/UNIFORM/v6/LMDZORINCA_v6/GENERAL/DRIVER/orchidee.driver
r3648 r3967 59 59 else 60 60 IGCM_comp_modifyDefFile nonblocker orchidee.def VEGET_UPDATE 0Y 61 fi 62 63 # Set LAI_MAP in orchidee.def acording to value set in orchidee.card section UserChoices 64 # If LAI_MAP is not definded in orchidee.card, set default value n 65 # Note: this option is only read by ORCHIDEE if starting without restart files 66 if [ ! X${orchidee_UserChoices_LAI_MAP} = X ] ; then 67 IGCM_comp_modifyDefFile nonblocker orchidee.def LAI_MAP ${orchidee_UserChoices_LAI_MAP} 68 else 69 IGCM_comp_modifyDefFile nonblocker orchidee.def LAI_MAP DEFAULT 70 fi 71 72 # Set DO_WOOD_HARVEST in orchidee.def acording to value set in orchidee.card section UserChoices 73 # If DO_WOOD_HARVEST is not definded in orchidee.card, set default value y 74 if [ ! X${orchidee_UserChoices_DO_WOOD_HARVEST} = X ] ; then 75 IGCM_comp_modifyDefFile nonblocker orchidee.def DO_WOOD_HARVEST ${orchidee_UserChoices_DO_WOOD_HARVEST} 76 else 77 IGCM_comp_modifyDefFile nonblocker orchidee.def DO_WOOD_HARVEST DEFAULT 61 78 fi 62 79 -
CONFIG/UNIFORM/v6/LMDZORINCA_v6/GENERAL/DRIVER/xios.driver
r2694 r3967 19 19 IGCM_comp_modifyXmlFile force iodef.xml using_server NONE true 20 20 21 # Activate 2nd server level for CMIP6 type experiments (CMIP6 workflow) 22 if [ X"$( echo ${config_UserChoices_ExpType} | grep CMIP6 )" != "X" ] ; then 23 IGCM_comp_modifyXmlFile force iodef.xml using_server2 NONE true 24 fi 25 21 26 if [ -f namcouple ] ; then 22 27 sed -e "s/2 LMDZ oceanx/3 LMDZ oceanx ${config_Executable_IOS[1]}/" namcouple > namcouple.tmp -
CONFIG/UNIFORM/v6/LMDZORINCA_v6/GENERAL/PARAM/config.def_actuel
r3897 r3967 1 1 ## Cycle diurne ou non 2 cycle_diurne=y 2 iflag_cycle_diurne=1 3 4 ## Pas de temps de couplage (s). 5 t_coupl=_AUTO_ 6 3 7 ## Soil Model ou non 4 8 soil_model=y 5 ## Pas de temps de couplage (s).6 t_coupl=_AUTO_7 9 8 10 ## Nombre d'appels des routines de rayonnements ( par jour) … … 15 17 # Parametres "orbitaux/ ere geologique" 16 18 # 17 ### R_ecc = Excentricite 18 R_ecc = 0.016715 19 ### R_peri = Equinoxe 20 R_peri = 102.7 21 ### R_incl = Inclinaison 22 R_incl = 23.441 23 ### solaire = Constante solaire 24 #solaire = _AUTO_ : DEFAULT = 1366.0896 25 solaire = _AUTO_ : DEFAULT = 1361.20 19 ### R_ecc = Excentricite (lue dans Eccentricity.txt) 20 R_ecc = _AUTO_: DEFAULT = 0.016715 21 ### R_peri = Equinoxe (lue dans Perihelie.txt) 22 R_peri = _AUTO_: DEFAULT = 102.7 23 ### R_incl = Inclinaison (lue dans Obliquity.txt) 24 R_incl = _AUTO_: DEFAULT = 23.441 25 ### solaire = Constante solaire (lue dans SOLARANDVOLCANOES.txt) 26 solaire = _AUTO_: DEFAULT = 1361.20 26 27 ### constante solaire lue dans un fichier par defaut 27 28 ok_suntime_rrtm=y … … 29 30 # Taux gaz a effet de serre 30 31 # 31 ### co2_ppm = taux CO2 en ppm, l'année 2000 forcage CMIP632 co2_ppm = _AUTO_: DEFAULT = 3.6912e+0232 ### co2_ppm = taux CO2 en ppm, l'année 1850 forcage CMIP6 33 co2_ppm = _AUTO_: DEFAULT = 2.8432e+02 33 34 ### co2_ppm_per = taux 4xCO2 en ppm (uniqument pour calcul des diags) 34 co2_ppm_per = _AUTO_: DEFAULT = 14.7648e+0235 ### CH4_ppb = taux CH4 en ppb, l'année 2000 forcage CMIP636 CH4_ppb = _AUTO_ : DEFAULT = 1.7780e+0337 ### N2O_ppb = taux N2O en ppb, l'année 2000 forcage CMIP638 N2O_ppb = _AUTO_ : DEFAULT = 3.1576e+0239 ### CFC11_ppt = taux en ppt, l'année 2000 forcage CFC11eq_CMIP640 CFC11_ppt = _AUTO_ : DEFAULT = 6.3990e+0141 ### CFC12_ppt = taux en ppt, l'année 2000 forcage CFC12eq_CMIP642 CFC12_ppt = _AUTO_ : DEFAULT = 1.0511e+0335 co2_ppm_per = _AUTO_: DEFAULT =11.3728e+02 36 ### CH4_ppb = taux CH4 en ppb, l'année 1850 forcage CMIP6 37 CH4_ppb = _AUTO_: DEFAULT = 8.0825e+02 38 ### N2O_ppb = taux N2O en ppb, l'année 1850 forcage CMIP6 39 N2O_ppb = _AUTO_: DEFAULT = 2.7302e+02 40 ### CFC11_ppt = taux en ppt, l'année 1850 forcage CFC11eq_CMIP6 41 CFC11_ppt = _AUTO_: DEFAULT = 1.1726e+01 42 ### CFC12_ppt = taux en ppt, l'année 1850 forcage CFC12eq_CMIP6 43 CFC12_ppt = _AUTO_: DEFAULT = 1.6513e+01 43 44 # 44 45 # Parametres effets directs/indirects des "aerosols" … … 49 50 ok_aie=_AUTO_ 50 51 ### aer_type = Aerosol variation type : actuel / preind / scenario / annuel 51 aer_type= actuel52 aer_type=preind 52 53 ### aerosol coupling = online (y) or offline (n) 53 54 aerosol_couple=_AUTO_ … … 56 57 ### flag_aerosol = type of coupled aerosol, if aerosol offline 57 58 ### 0 => no aerosol, 1 => sulfate only, 2 => bc only, 3 => pom only, 4 => seasalt only, 5 => dust only, 6 => all aerosol 58 flag_aerosol=_AUTO_ 59 flag_aerosol=_AUTO_ 59 60 ### ok_cdnc=y/n Cloud droplet number concentration 60 61 ok_cdnc=_AUTO_ … … 69 70 # 2: read two ozone climatologies, the average day and night climatology and the daylight climatology 70 71 read_climoz=_AUTO_ 71 # 72 # 72 73 # Aerosols stratospheriques utilises par defaut 74 # 73 75 flag_aerosol_strat=2 74 76 # 75 77 # COSP 78 # 76 79 ok_cosp=_AUTO_ 77 78 -
CONFIG/UNIFORM/v6/LMDZORINCA_v6/GENERAL/PARAM/iodef.xml
r3542 r3967 13 13 <context id="xios"> 14 14 15 <variable_definition> 16 <variable id="optimal_buffer_size" type="string">performance</variable> 17 <variable id="buffer_size_factor" type="double">1.0</variable> 18 <variable id="min_buffer_size" type="int">10000000</variable> 19 <variable id="info_level" type="int">1</variable> 20 <variable id="using_server" type="bool">false</variable> 21 <variable id="using_oasis" type="bool">false</variable> 22 <variable id="oasis_codes_id" type="string" >LMDZ,oceanx</variable> 15 <variable_definition> 16 <variable_group id="server"> 17 <variable id="using_server2" type="bool">false</variable> 18 <variable id="ratio_server2" type="int">50</variable> 19 </variable_group> 20 21 <variable_group id="buffer"> 22 <variable id="optimal_buffer_size" type="string">performance</variable> 23 <variable id="buffer_size_factor" type="double">1.0</variable> 24 <variable id="min_buffer_size" type="int">10000000</variable> 25 </variable_group> 26 27 <variable_group id="parameters" > 28 <variable id="using_server" type="bool">false</variable> 29 <variable id="info_level" type="int">1</variable> 30 <variable id="print_file" type="bool">false</variable> 31 <variable id="using_oasis" type="bool">false</variable> 32 <variable id="oasis_codes_id" type="string" >LMDZ,oceanx</variable> 33 </variable_group> 34 <variable id="activate_non_distributed_transformation" type="bool">true</variable> 35 <variable id="recv_field_timeout" type="double">3000.0</variable> 23 36 </variable_definition> 24 37 25 38 </context> 26 39 -
CONFIG/UNIFORM/v6/LMDZORINCA_v6/GENERAL/PARAM/orchidee.def_CWRR
r3648 r3967 80 80 NVM=15 81 81 PFT_TO_MTC=1,2,3,4,5,6,7,8,9,10,11,12,13,10,10 82 NAME__10='temperate C3 grass '83 NAME__14='tropical C3 grass '84 NAME__15='boreal C3 grass '82 PFT_NAME__10='temperate C3 grass ' 83 PFT_NAME__14='tropical C3 grass ' 84 PFT_NAME__15='boreal C3 grass ' 85 85 86 86 # STRESS_GS, STRESS_GM, STRESS_VCMAX : Stress on GS, GM and VCMAX … … 137 137 138 138 # Activate harvest of wood 139 DO_WOOD_HARVEST= y139 DO_WOOD_HARVEST=_AUTO_ : DEFAULT=y 140 140 141 141 # Growth respiration (default values except for PFT=14 and PFT=15) … … 190 190 VEGET_UPDATE = _AUTO_ 191 191 192 # Read lai map (default n) 193 LAI_MAP = _AUTO_ : DEFAULT = n 192 194 193 195 # Parameters related to surface and thermal physical properties -
CONFIG/UNIFORM/v6/LMDZORINCA_v6/GENERAL/PARAM/orchidee.def_Choi
r3648 r3967 64 64 NVM=15 65 65 PFT_TO_MTC=1,2,3,4,5,6,7,8,9,10,11,12,13,10,10 66 PFT_NAME__10='temperate C3 grass ' 67 PFT_NAME__14='tropical C3 grass ' 68 PFT_NAME__15='boreal C3 grass ' 66 69 67 70 # Set NVM and PFT_TO_MTC as follow to run with PFTmap files containing 13 pfts … … 80 83 VEGET_UPDATE = _AUTO_ 81 84 85 # Read lai map (default n) 86 LAI_MAP = _AUTO_ : DEFAULT = n 82 87 83 88 # Create river description file -
CONFIG/UNIFORM/v6/LMDZORINCA_v6/GENERAL/PARAM/run.def
r3542 r3967 54 54 ### Only read by ce0l : Do not set land points on Antartic 55 55 no_ter_antartique=y 56 ### Do not call phytrac to speed things up 57 iflag_phytrac=_AUTO_: DEFAULT = 0 56 58 57 -
CONFIG/UNIFORM/v6/LMDZORINCA_v6/GENERAL/PARAM/traceur.def
r3024 r3967 3 3 10 10 H2Ol 4 4 10 10 H2Oi 5 10 10 Aga5 00 00 Aga -
CONFIG/UNIFORM/v6/LMDZORINCA_v6/GENERAL/POST/monitoring01_lmdz.cfg
r3648 r3967 58 58 od550aer_strat_forcing | "od550_STRAT" | "" | "od550_STRAT[d=1]" | "Aerosol optical depth at 550nm" | "-" | "aire[d=1]" 59 59 od550lt1aer_forcing | "od550lt1aer" | "" | "od550lt1aer[d=1]" | "Fine mode optical depth" | "-" | "aire[d=1]" 60 topswai_forcing | "topswai" | "" | "topswai[d=1]" | "AIE at TOA" | "W/m^2" | "aire[d=1]"61 solswai_forcing | "solswai" | "" | "solswai[d=1]" | "AIE at SRF" | "W/m^2" | "aire[d=1]"62 topswad_forcing | "topswad" | "" | "topswad[d=1]" | "ADE at TOA" | "W/m^2" | "aire[d=1]"63 solswad_forcing | "solswad" | "" | "solswad[d=1]" | "ADE at SRF" | "W/m^2" | "aire[d=1]"64 60 tro3_strato_forcing_DU | "colO3_strat" | "" | "colO3_strat[x=@ave,y=@ave,d=1]" | "colonne ozone strato" | "DU" | "" 65 61 tro3_tropo_forcing_DU | "colO3_trop" | "" | "colO3_trop[x=@ave,y=@ave,d=1]" | "colonne ozone trop" | "DU" | ""
Note: See TracChangeset
for help on using the changeset viewer.