Index: /CONFIG/UNIFORM/v6/IPSLCM5A2CHT/EXPERIMENTS/IPSLCMCHT/S_pdControl/COMP/inca.card
===================================================================
--- /CONFIG/UNIFORM/v6/IPSLCM5A2CHT/EXPERIMENTS/IPSLCMCHT/S_pdControl/COMP/inca.card	(revision 4025)
+++ /CONFIG/UNIFORM/v6/IPSLCM5A2CHT/EXPERIMENTS/IPSLCMCHT/S_pdControl/COMP/inca.card	(revision 4026)
@@ -40,9 +40,13 @@
             (${R_IN}/CHM/INCA${RESOL_CHM}/STRAT/o3clim_lmdz_phy_2000.nc            	,   o3clim.nc     	)\
             (${R_IN}/CHM/INCA${RESOL_CHM}/STRAT/o3coeff_lmdz_phy.nc                	,   o3lin.nc		)\
-            (${R_IN}/CHM/INCA${RESOL_CHM}/STRAT/SAD_Pa/sadclim_lmdz_phy_2000.nc 	,   sad.nc		)\
+            (${R_IN}/CHM/INCA${RESOL_CHM}/STRAT/SAD_Pa/sadclim_lmdz_phy_${year}.nc 	,   sad.nc		)\
             (${R_IN}/CHM/INCA${RESOL_CHM}/STRAT/lglived.dat                        	,   lglived.dat		)\
-            (${R_IN}/CHM/INCA${RESOL_CHM}/STRAT/aircraft_IMPACT_REACT4C_phy.nc 		,   aircraft_hour.nc    )\
+            (/ccc/work/cont003/gen2201/p24haug/INPUT/CMIP6/aircraft_2000_phy.nc     ,   aircraft_mth.nc     )\
             (${R_IN}/CHM/INCA${RESOL_CHM}/STRAT/hikari_zero_lmdz_phy.nc    		,   aircraft_hs.nc      )\
-            (${R_IN}/CHM/INCA${RESOL_CHM}/sflx_nitrate.nc   				,   sflx_p2p.nc         )\
+            (/ccc/work/cont003/gen2201/p24haug/INPUT/CMIP6/sflx_lmdz_GHG_phy.nc,        sflx_GHG.nc         )\
+            (/ccc/work/cont003/gen2201/p24haug/INPUT/CMIP6/sflx_lmdz_MISC_phy.nc,       sflx_MISC.nc        )\
+            (/ccc/work/cont003/gen2201/p24haug/INPUT/CMIP6/sflx_lmdz_NAT_phy.nc,        sflx_NAT.nc         )\
+            (/ccc/work/cont003/gen2201/p24haug/INPUT/CMIP6/sflx_lmdz_ANT_2000_phy.nc,   sflx_ANT.nc         )\
+            (/ccc/work/cont003/gen2201/p24haug/INPUT/CMIP6/sflx_lmdz_BBG_2000_phy.nc,   sflx_BBG.nc         )\
             (${R_IN}/CHM/INCA${RESOL_CHM}/landuse.nc   					,   landuse.nc          )\
             (${R_IN}/CHM/INCA${RESOL_CHM}/rhvEC.txt        				,   rhvEC.txt           )\
@@ -53,4 +57,21 @@
             (${R_IN}/CHM/INCA${RESOL_CHM}/rhv.dat          				,   rhv.dat             )\
  	    (${R_IN}/CHM/INCA${RESOL_CHM}/new_phototable.dat   					,   phototable.dat	)
+
+#ListNonDel= (${R_IN}/CHM/INCA${RESOL_CHM}/npp.nc					,   npp.nc              )\
+#            (${R_IN}/CHM/INCA${RESOL_CHM}/STRAT/o3clim_lmdz_phy_2000.nc            	,   o3clim.nc     	)\
+#            (${R_IN}/CHM/INCA${RESOL_CHM}/STRAT/o3coeff_lmdz_phy.nc                	,   o3lin.nc		)\
+#            (${R_IN}/CHM/INCA${RESOL_CHM}/STRAT/SAD_Pa/sadclim_lmdz_phy_2000.nc 	,   sad.nc		)\
+#            (${R_IN}/CHM/INCA${RESOL_CHM}/STRAT/lglived.dat                        	,   lglived.dat		)\
+#            (${R_IN}/CHM/INCA${RESOL_CHM}/STRAT/aircraft_IMPACT_REACT4C_phy.nc 		,   aircraft_hour.nc    )\
+#            (${R_IN}/CHM/INCA${RESOL_CHM}/STRAT/hikari_zero_lmdz_phy.nc    		,   aircraft_hs.nc      )\
+#            (${R_IN}/CHM/INCA${RESOL_CHM}/sflx_nitrate.nc   				,   sflx_p2p.nc         )\
+#            (${R_IN}/CHM/INCA${RESOL_CHM}/landuse.nc   					,   landuse.nc          )\
+#            (${R_IN}/CHM/INCA${RESOL_CHM}/rhvEC.txt        				,   rhvEC.txt           )\
+#            (${R_IN}/CHM/INCA${RESOL_CHM}/wthEC.txt        				,   wthEC.txt           )\
+#            (${R_IN}/CHM/INCA${RESOL_CHM}/clyEC.txt        				,   clyEC.txt           )\
+#            (${R_IN}/CHM/INCA${RESOL_CHM}/wth.dat          				,   wth.dat             )\
+#            (${R_IN}/CHM/INCA${RESOL_CHM}/cly.dat          				,   cly.dat             )\
+#            (${R_IN}/CHM/INCA${RESOL_CHM}/rhv.dat          				,   rhv.dat             )\
+# 	    (${R_IN}/CHM/INCA${RESOL_CHM}/new_phototable.dat   					,   phototable.dat	)
 
 
Index: /CONFIG/UNIFORM/v6/IPSLCM5A2CHT/EXPERIMENTS/LMDZORINCA/NMHC_AER/COMP/inca.card
===================================================================
--- /CONFIG/UNIFORM/v6/IPSLCM5A2CHT/EXPERIMENTS/LMDZORINCA/NMHC_AER/COMP/inca.card	(revision 4026)
+++ /CONFIG/UNIFORM/v6/IPSLCM5A2CHT/EXPERIMENTS/LMDZORINCA/NMHC_AER/COMP/inca.card	(revision 4026)
@@ -0,0 +1,144 @@
+#- $Id: inca.card 70 2007-06-21 14:20:42Z acosce $
+[Compatibility]
+libIGCM=1.0
+
+[UserChoices]
+# Set LMDZ_10m_winds to choose if the simulation will use online 10m wind (=y) or offline (=n)
+LMDZ_10m_winds=y
+# Set 10m_Winds_method to choose which way we will use to work with 10m wind from gcm (so if LMDZ_10m_winds=y)
+#10m_winds_method=weibull10 --> use weibull method for 10m wind from gcm,
+#10m_winds_method=threshold --> use threshold method for 10m wind from gcm
+10m_winds_method=threshold
+#choose threshold or weibull10 parameter value
+wind_parameter=0.85
+# heat fluxes computed with feedback corresponding to 0 --> no aerosol effects, 1--> aerosol effects selected by ok_ade, ok_aie
+feedb=0
+#choose sedimentation multilayer or one layer 
+multilayer_sedim=y
+#coupled model with ORCH
+#if yes, you need to put to CHEMISTRY_BVOC=y in orchidee.def and decomment lines for fertilizer and bbg in orchidee.card
+CoupOrchInca=n
+#active or not chemistry flux in output 
+calcul_flux=n
+#choose which type of aircraft you will use (0 - 1 - 2 - 3) (no aircraft / old inca aircraft / new subsonic inca aircraft / subsonic + hypersonic inca aircraft)
+flag_plane=1
+#choose which time interpolation you want to interpolate sflx file. ( 0 - 1 - 2) (no interpolation / point to point interpolation / Sheng & Zwiers interpolation) 
+#be careful name of sflx file change with the choice of emi_interp_time ( no file / sflx_p2p.nc / sflx_SZ.nc ) 
+emi_interp_time=1
+
+# Use XIOS and/or IOIPSL as output library
+XIOS=y
+IOIPSL=n
+
+[InitialStateFiles]
+List= ()
+	
+[BoundaryFiles]
+#List=	    (/ccc/work/cont003/subipsl/subipsl/ECMWF320x160/AN${year}/165_${year}${month}.nc      , u10mec.nc)\
+#	    (/ccc/work/cont003/subipsl/subipsl/ECMWF320x160/AN${year}/166_${year}${month}.nc      , v10mec.nc)\
+#	    (${R_IN}/ATM/${RESOL_ATM}/NUDGE_FILES/ERAI/AN${year}/u10m_ecmwf_${year}${month}.nc , u10m.nc  )\
+#	    (${R_IN}/ATM/${RESOL_ATM}/NUDGE_FILES/ERAI/AN${year}/v10m_ecmwf_${year}${month}.nc , v10m.nc  )
+List=()
+
+ListNonDel= (${R_IN}/CHM/INCA${RESOL_CHM}/npp.nc		,   npp.nc		)\
+            (${R_IN}/CHM/INCA${RESOL_CHM}/o3clim.nc		,   o3clim.nc		)\
+	    (${R_IN}/CHM/INCA${RESOL_CHM}/so4.nc		,   so4.nc		)\
+            (${R_IN}/CHM/INCA${RESOL_CHM}/aircraft.nc		,   aircraft_mth.nc    	)\
+            (${R_IN}/CHM/INCA${RESOL_CHM}/sflx_nitrate.nc	,   sflx_p2p.nc		)\
+	    (${R_IN}/CHM/INCA${RESOL_CHM}/landuse.nc		,   landuse.nc		)\
+            (${R_IN}/CHM/INCA${RESOL_CHM}/rhvEC.txt		,   rhvEC.txt		)\
+            (${R_IN}/CHM/INCA${RESOL_CHM}/wthEC.txt		,   wthEC.txt		)\
+            (${R_IN}/CHM/INCA${RESOL_CHM}/clyEC.txt		,   clyEC.txt		)\
+            (${R_IN}/CHM/INCA${RESOL_CHM}/wth.dat		,   wth.dat		)\
+            (${R_IN}/CHM/INCA${RESOL_CHM}/cly.dat		,   cly.dat		)\
+ 	    (${R_IN}/CHM/INCA${RESOL_CHM}/rhv.dat		,   rhv.dat		)\
+ 	    (${R_IN}/CHM/INCA${RESOL_CHM}/new_phototable.dat   	,   phototable.dat	)
+
+
+[ParametersFiles]
+List=	(${SUBMIT_DIR}/PARAM/inca.def, .),\
+	(${MODIPSL}/modeles/INCA/src/INCA_XML/context_inca.xml, .)   ,\
+	(${MODIPSL}/modeles/INCA/src/INCA_XML/field_def_inca.xml, .) ,\
+	(${MODIPSL}/modeles/INCA/src/INCA_XML/file_def_inca_NMHC_AER_daily.xml, file_def_inca_daily.xml), \
+	(${MODIPSL}/modeles/INCA/src/INCA_XML/file_def_inca_NMHC_AER_monthly.xml, file_def_inca_monthly.xml), \
+    	(${MODIPSL}/bin/inca.dat, .)
+
+[RestartFiles]
+# List restart that have to be saved/restored each loop (file out, saved, and in) :
+List= (reprecipinsoil.dat, precipinsoil.dat, precipinsoil.dat) 
+
+
+[OutputText]
+List=(inca.out, inca.def,context_inca.xml,field_def_inca.xml,file_def_inca_daily.xml,file_def_inca_monthly.xml, inca_IDxml.out)
+
+[OutputFiles]
+List=	(inca1d_emi.nc     	,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_emi.nc     	,  NONE                  ),\
+	(inca1d_species.nc 	,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_species.nc 	,  Post_1D_inca_species  ),\
+	(inca1d_dep.nc    	,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_dep.nc    	,  NONE                  ),\
+	(inca1d_chem.nc    	,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_chem.nc    	,  Post_1D_inca_chem     ),\
+	(inca1d_aero.nc    	,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_aero.nc    	,  Post_1D_inca_aero     ),\
+	(inca1d_phtrate.nc 	,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_phtrate.nc 	,  NONE  		 ),\
+	(inca1d_reacflux.nc	,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_reacflux.nc	,  NONE                  ),\
+	(inca1d_washrate.nc	,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_washrate.nc	,  NONE                  ),\
+	(inca1d_forcage.nc 	,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_forcage.nc 	,  Post_1D_inca_forcage  ),\
+	(inca1d_veget.nc   	,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_veget.nc   	,  Post_1D_inca_veget    ),\
+	(inca1m_emi.nc     	,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_emi.nc     	,  NONE                  ),\
+	(inca1m_species.nc 	,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_species.nc 	,  NONE                  ),\
+	(inca1m_dep.nc    	,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_dep.nc    	,  NONE                  ),\
+	(inca1m_chem.nc    	,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_chem.nc    	,  NONE                  ),\
+	(inca1m_aero.nc    	,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_aero.nc    	,  NONE                  ),\
+	(inca1m_phtrate.nc 	,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_phtrate.nc 	,  NONE  		 ),\
+	(inca1m_reacflux.nc	,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_reacflux.nc	,  NONE                  ),\
+	(inca1m_washrate.nc	,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_washrate.nc	,  NONE                  ),\
+	(inca1m_forcage.nc 	,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_forcage.nc 	,  NONE                  ),\
+	(inca1m_veget.nc   	,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_veget.nc   	,  NONE                  ),\
+	(aerosols_from_inca.nc	,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_aerosols_from_inca.nc,  NONE			 ),\
+	(inca_oxydants.nc	,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_oxydants.nc	,  NONE                  ) 
+
+
+
+[Post_1D_inca_aero]
+Patches= ()
+GatherWithInternal = (lon, lat, presnivs, time_centered, time_centered_bounds, time_counter, area)
+TimeSeriesVars2D = (od550bcas,od550oaas,od550so4as, od550so4cs, od550ssas,od550ssss, od550sscs,od550dustci,od550bcai,od550oaai, loaddustci, loadno3ci, loadbcai, loadoaai, loadsscs, loadso4cs, loadno3cs, loadssas, loadbcas, loadoaas, loadso4as, loadnh4as, loadno3as, loadssss)
+ChunckJob2D = NONE
+TimeSeriesVars3D = ()
+ChunckJob3D = NONE
+Seasonal=OFF
+
+[Post_1D_inca_species]
+Patches= ()
+GatherWithInternal = (lon, lat, presnivs, time_centered, time_centered_bounds,time_counter, area)
+TimeSeriesVars2D = ()
+ChunckJob2D = NONE
+TimeSeriesVars3D = (vmrno,vmrno2,vmro3,vmrch4,vmrco,,mmrso4cs, mmrso4as, mmrdms, mmrssss, vmrno3, vmrhno3, mmrbcai, mmrdustci)
+ChunckJob3D = NONE
+Seasonal=OFF
+
+
+[Post_1D_inca_chem]
+Patches= ()
+GatherWithInternal = (lon, lat, presnivs,time_centered, time_centered_bounds, time_counter, area)
+TimeSeriesVars2D = (colo3, colco, colno2, colch2o, colch4, colhno2, coloh, colso2)
+ChunckJob2D = NONE
+TimeSeriesVars3D = ()
+ChunckJob3D = NONE
+Seasonal=OFF
+
+[Post_1D_inca_forcage]
+Patches= ()
+GatherWithInternal = (lon, lat, presnivs, time_centered, time_centered_bounds,time_counter, area)
+TimeSeriesVars2D = (SWTOAAS_ANT, SWTOAAS_AER, SWTOAAS_NAT, SWTOAAS_BC, SWTOAAS_SO4, SWTOAAS_POM, SWTOAAS_DUST, SWTOAAS_SS, SWTOAAS_DNO3, SWTOASS_SNO3,  SWTOAAS_FNO3)
+ChunckJob2D = NONE
+TimeSeriesVars3D = ()
+ChunckJob3D = NONE
+Seasonal=OFF
+
+[Post_1D_inca_veget]
+Patches= ()
+GatherWithInternal = (lon, lat, veget, time_counter)
+TimeSeriesVars2D = (hdry,snowfromOrch,emi_isop,emi_mono)
+ChunckJob2D = NONE
+TimeSeriesVars3D = (flx_iso,flx_mono,flx_ORVOC,flx_acetal)
+ChunckJob3D = NONE
+Seasonal=OFF
Index: /CONFIG/UNIFORM/v6/IPSLCM5A2CHT/EXPERIMENTS/LMDZORINCA/NMHC_AER/COMP/lmdz.card
===================================================================
--- /CONFIG/UNIFORM/v6/IPSLCM5A2CHT/EXPERIMENTS/LMDZORINCA/NMHC_AER/COMP/lmdz.card	(revision 4026)
+++ /CONFIG/UNIFORM/v6/IPSLCM5A2CHT/EXPERIMENTS/LMDZORINCA/NMHC_AER/COMP/lmdz.card	(revision 4026)
@@ -0,0 +1,121 @@
+#- $Id: lmdz.card 70 2007-06-21 14:20:42Z acosce $
+[Compatibility]
+libIGCM=1.0
+
+[UserChoices]
+# Physics package to use :
+# LMDZ_Physics=AP for standard/old physics(defalut), can be used with LMDZ4_AR5 or LMDZ5/trunk sources
+# LMDZ_Physics=NPv3.2 for new physics, to be used with LMDZ5/trunk revision 1554 or later
+# LMDZ_Physics=NPv5.4 for new physics to be used with LMDZ5/trunk revision 2449 or later
+# LMDZ_Physics=NPv5.67 for new physics to be used with LMDZ5/testing revision 2546 or later
+# LMDZ_Physics=NPv5.70 for new physics to be used with LMDZ5/testing revision 2595 or later
+# LMDZ_Physics=NPv5.80bz0 for new physics to be used with LMDZ5/trunk revision 2699 or later
+LMDZ_Physics=AP
+
+# Activate the call to phytrac to run tracer simulation 
+iflag_phytrac=1
+
+# Use XIOS as output library
+XIOS=y
+
+# Set the variable CREATE needed further below to find the initial and boundary condition files.
+CREATE=ELC-${RESOL_ATM_3D}
+
+# ByPass_hgardfou_teta=y : modify teta_ parameters for following CumulPeriod only
+ByPass_hgardfou_teta=n
+
+# ByPass_hgardfou_mats=y : set parameter purmats=y for following CumulPeriod only
+ByPass_hgardfou_mats=n
+
+# Set ConfType to choose parameters for aerosols, solar and green house gazes. 
+# The parameter file PARAM/config.def_$ConfType will be used.
+# ConfType=preind/actuel/annuel
+ConfType=actuel
+
+# manage radiative aerosol effect and ozone 
+flag_aerosol=6
+ok_ade=y
+ok_aie=n
+aerosol_couple=y
+read_climoz=0
+ok_cdnc=y
+
+# Set OutLevel to choose the level of output for LMDZ. 
+# OutLevel=low/medium/high
+OutLevel=low
+
+# COSP activation and choose of output frequency for COSP (monthly, daily, HF) = y/n
+LMDZ_COSP_OK=n
+LMDZ_COSP_monthly=n
+LMDZ_COSP_daily=n
+LMDZ_COSP_hf=n
+
+# Set NMC Outputs frequency (monthly, daily, HF) = y/n
+LMDZ_NMC_monthly=n
+LMDZ_NMC_daily=n
+LMDZ_NMC_hf=n
+
+
+# Nugding : ok_guide=y/n
+# If ok_guide=y, add nudging files(u.nc, v.nc, hur.nc,...) in BoundaryFiles section below.
+ok_guide=n
+
+
+[InitialStateFiles]
+List= 	(${R_IN}/CHM/INCA${RESOL_CHM}/start_o2a_noTer.nc	, start.nc	) \
+	(${R_IN}/CHM/INCA${RESOL_CHM}/startphy_o2a_noTer.nc	, startphy.nc	)
+
+
+[BoundaryFiles]
+List=   (${R_IN}/ATM/LIMIT/ERAI/interpol/96x95_ORCA2.3_gregorian/limit_${year}.nc , limit.nc)
+
+#	(${R_IN}/ATM/${RESOL_ATM}/NUDGE_FILES/ERAI/AN${year}/u_ecmwf_${year}${month}.nc 	, u.nc		),\
+#	(${R_IN}/ATM/${RESOL_ATM}/NUDGE_FILES/ERAI/AN${year}/v_ecmwf_${year}${month}.nc 	, v.nc		)
+ 
+ListNonDel= ()
+
+[ParametersFiles]
+List=   (${SUBMIT_DIR}/PARAM/physiq.def_${LMDZ_Physics}, physiq.def),       \
+        (${SUBMIT_DIR}/PARAM/gcm.def_${RESOL_ATM_XY}_${LMDZ_Physics},    gcm.def),          \
+        (${SUBMIT_DIR}/PARAM/vert.def_L${RESOL_ATM_Z},   vert.def),         \
+        (${MODIPSL}/modeles/LMDZ/DefLists/cosp_input_nl.txt, .),            \
+        (${MODIPSL}/modeles/LMDZ/DefLists/cosp_output_nl.txt, .),           \
+        (${SUBMIT_DIR}/PARAM/config.def_${ConfType},  config.def),          \
+        (${SUBMIT_DIR}/PARAM/guide.def, .),                                 \
+        (${SUBMIT_DIR}/PARAM/run.def, .),                                   \
+        (${SUBMIT_DIR}/PARAM/iodef.xml, . ),                                \
+	(${SUBMIT_DIR}/PARAM/traceur.def_h2o_${LMDZ_Physics}, traceur.def), \
+        (${MODIPSL}/modeles/LMDZ/DefLists/context_lmdz.xml, . ),            \
+        (${MODIPSL}/modeles/LMDZ/DefLists/field_def_lmdz.xml, . ),	    \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histmth_lmdz.xml, . ),   \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histmthCOSP_lmdz.xml, .),\
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histmthNMC_lmdz.xml, . ),\
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histday_lmdz.xml, . ),   \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histdayCOSP_lmdz.xml, .),\
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histdayNMC_lmdz.xml, . ),\
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histhf_lmdz.xml, . ),    \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histhfCOSP_lmdz.xml, .), \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histhfNMC_lmdz.xml, . ), \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histstn_lmdz.xml, . ),   \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histstrataer_lmdz.xml, . ),\
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histins_lmdz.xml, . ),   \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histLES_lmdz.xml, . )
+
+[RestartFiles]
+List=	(restart.nc, restart.nc, start.nc), \
+	(restartphy.nc, restartphy.nc,  startphy.nc) 
+
+[OutputText]
+List=   (physiq.def, gcm.def, vert.def, run.def, traceur.def, guide.def, config.def, used_run.def, iodef.xml, context_lmdz.xml, field_def_lmdz.xml, file_def_*lmdz.xml, debug.01, lmdz.prt, out_gcm.e.err, out_gcm.e.out)
+
+[OutputFiles]
+List=	(histmth.nc,      ${R_OUT_ATM_O_M}/${PREFIX}_1M_histmth.nc,   Post_1M_histmth   )	
+
+[Post_1M_histmth]
+Patches= ()
+GatherWithInternal = (lon, lat, presnivs, time_counter, time_centered, time_centered_bounds, aire)
+TimeSeriesVars2D = (bils, cldh, cldl, cldm, cldq, cldt, evap, flat, ftime_con, iwp, lwp, LWdnSFC, LWdnSFCclr, LWupSFCclr, LWdn200, LWdn200clr, LWup200, LWup200clr, precip, prw, pluc, psol, q2m, rh2m, sens, sicf, slp, snow, soll0, soll, sols0, sols, SWdnSFC, SWupSFC, SWup200, SWdnTOA, SWupTOA, SWdn200, SWdnSFCclr, SWupSFCclr, SWupTOAclr, t2m, t2m_max, t2m_min, taux, taux_ter, taux_sic, taux_lic, taux_oce, tauy, tauy_ter, tauy_sic, tauy_lic, tauy_oce, lat_ter, lat_sic, lat_lic, lat_oce, nettop, pbase, ptop, topl0, topl, tops0, tops, topswad, topswai, tsol, tsol_ter, tsol_lic, tsol_oce, tsol_sic , u10m, u500, v10m, v500, w500, pourc_ter, pourc_oce, pourc_sic, pourc_lic, wind10m, od550aer, od550lt1aer, absvisaer, loadoa, loadbc, loadso4, loaddust, loadss, sconcoa, sconcbc, sconcso4, sconcdust, sconcss, reffclwtop, cldncl, swtoaas_ant, swtoacs_ant, swtoacf_ant, swsrfas_ant, swsrfcs_ant, swsrfcf_ant, swtoaas_nat, swtoacs_nat, swtoacf_nat, swsrfas_nat, swsrfcs_nat, swsrfcf_nat, solswai, solswad, swtoacf_zero, swsrfcf_zero)
+ChunckJob2D = 100Y
+TimeSeriesVars3D = (upwd, lwcon, iwcon, lcc3dcon, lcc3dstra, temp, theta, ovap, ovapinit, geop, vitu, vitv, vitw, pres, rneb, rnebcon, rhum, mc, paprs, scdnc, ec550aer, concoa, concbc, concso4, concss, concdust, reffclws, reffclwc, tnt, dtdyn, dtphy, dtlschr, tntr, tntscpbl, tnhus, dqdyn, dqvdf, tnhusscpbl, dqphy, evu, mcd)
+ChunckJob3D = 100Y
+Seasonal=ON
Index: /CONFIG/UNIFORM/v6/IPSLCM5A2CHT/EXPERIMENTS/LMDZORINCA/NMHC_AER/COMP/orchidee.card
===================================================================
--- /CONFIG/UNIFORM/v6/IPSLCM5A2CHT/EXPERIMENTS/LMDZORINCA/NMHC_AER/COMP/orchidee.card	(revision 4026)
+++ /CONFIG/UNIFORM/v6/IPSLCM5A2CHT/EXPERIMENTS/LMDZORINCA/NMHC_AER/COMP/orchidee.card	(revision 4026)
@@ -0,0 +1,85 @@
+[Compatibility]
+libIGCM=1.0
+
+[UserChoices]
+# The variable DefSuffix gives the suffix of the orchidee.def file to be used.
+# By default the file orchidee.def_Choi will be selected.
+# Sef DefSuffix=Choi (default) to activate default 2-layer Choisnel hydrology
+# Set DefSuffix=CWRR to activate 11-layer CWRR hydrology
+DefSuffix=CWRR
+
+VEGET_UPDATE=1Y
+
+
+# Specify output level for output files
+# Only the files sechiba_history.nc, sechiba_out_2.nc and sechiba_history_4dim.nc can be set here.
+# output_level_filename=0     : lowest level writing only variables needed for the monitoring
+# output_level_filename=12    : highest level which will output all variables
+# output_level_filename=NONE  : deactivate the file
+output_level_sechiba_history = 11
+output_level_sechiba_out_2 = NONE
+output_level_sechiba_history_4dim = 11
+
+# Specify output frequency for each file [1y, 1mo, 1d, 10800s, 1ts]
+# Settings using WriteFrequency in config.card is not longer used
+output_freq_sechiba_history = 1mo
+output_freq_sechiba_out_2 = 10800s
+output_freq_sechiba_history_4dim = 1mo
+
+
+[InitialStateFiles]
+List=	(${R_IN}/SRF/soils_param.nc,        . ), \
+	(${R_IN}/SRF/reftemp.nc, . ), \
+	(${R_IN}/SRF/routing.nc, . ), \
+        (${R_IN}/SRF/albedo/alb_bg_modisopt_2D_ESA_v2.nc, alb_bg.nc ), \
+        (${R_IN}/SRF/cartepente2d_15min.nc, .)
+
+[BoundaryFiles]
+List= (${R_IN}/SRF/PFTMAPS/CMIP6/ESA-LUH2v2/historical/15PFT.v1/PFTmap_${year}.nc, PFTmap.nc) ,\
+      (${R_IN}/SRF/WOODHARVEST/LUH2v2/historical/woodharvest_${year}.nc, woodharvest.nc)
+ListNonDel= ()
+
+
+# to decomment if we want to calcul bvoc - for this we need to activate CHEMISTRY_BVOC in orchidee.def_Choi
+#ListNonDel= (${R_IN}/SRF/chemistry/orchidee_fertilizer_1995.nc, .), \
+#            (${R_IN}/SRF/chemistry/orchidee_bbg_clim.nc, .)
+
+[SmoothFiles]
+List= ()
+
+[ParametersFiles]
+List=	(${SUBMIT_DIR}/PARAM/orchidee.def_${DefSuffix}, orchidee.def)   ,\
+	(${MODIPSL}/modeles/ORCHIDEE/src_xml/file_def_orchidee.xml, .)  ,\
+	(${MODIPSL}/modeles/ORCHIDEE/src_xml/file_def_input_orchidee.xml, .) ,\
+	(${MODIPSL}/modeles/ORCHIDEE/src_xml/context_orchidee.xml, .)   ,\
+	(${MODIPSL}/modeles/ORCHIDEE/src_xml/field_def_orchidee.xml, .)
+
+[RestartFiles]
+List=	(sechiba_rest_out.nc, sechiba_rest.nc, sechiba_rest_in.nc)
+
+[OutputText]
+List=   (out_orchidee, orchidee.def, used_orchidee.def, iodef.xml, context_orchidee.xml, field_def_orchidee.xml, file_def_orchidee.xml, river_desc.nc, file_def_input_orchidee.xml)
+
+[OutputFiles]
+List=   (sechiba_history.nc,   ${R_OUT_SRF_O_M}/${PREFIX}_1M_sechiba_history.nc, Post_1M_sechiba_history), \
+        (sechiba_history_4dim.nc,${R_OUT_SRF_O_M}/${PREFIX}_1M_sechiba_history_4dim.nc, NONE), \
+        (sechiba_out_2.nc,     ${R_OUT_SRF_O_H}/${PREFIX}_HF_sechiba_out_2.nc,   NONE)
+
+[Post_1M_sechiba_history]
+Patches = ()
+GatherWithInternal = (lon, lat, time_counter, Areas, Contfrac, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (nobiofrac, alb_nir, alb_vis, evap, fluxlat, fluxsens, netrad, qair, rain, runoff, snow, snownobio, snowf, frac_snow, subli, tair, temp_sol, tsol_max, tsol_min, drainage,mrsos, mrso, mrros, mrro, prveg, evspsblveg, evspsblsoi, tran, treeFrac, grassFrac, cropFrac, baresoilFrac, residualFrac, TWBR, riverflow, coastalflow, DelSoilMoist_daily, DelIntercept_daily, DelSWE_daily, delstock_routing, snowmelt, LAImean, transpir, evapnu)
+ChunckJob2D = NONE
+TimeSeriesVars3D = (lai, maxvegetfrac, vegetfrac, ptn, nee)
+ChunckJob3D = NONE
+Seasonal = ON
+
+[Post_HF_sechiba_out_2]
+Patches = ()
+GatherWithInternal = (lon, lat, time_counter, Areas, Contfrac, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (mrsos, mrro)
+ChunckJob2D = 50Y
+TimeSeriesVars3D = (ptn)
+ChunckJob3D = 10Y
+Seasonal = OFF
+
Index: /CONFIG/UNIFORM/v6/IPSLCM5A2CHT/EXPERIMENTS/LMDZORINCA/NMHC_AER/COMP/stomate.card
===================================================================
--- /CONFIG/UNIFORM/v6/IPSLCM5A2CHT/EXPERIMENTS/LMDZORINCA/NMHC_AER/COMP/stomate.card	(revision 4026)
+++ /CONFIG/UNIFORM/v6/IPSLCM5A2CHT/EXPERIMENTS/LMDZORINCA/NMHC_AER/COMP/stomate.card	(revision 4026)
@@ -0,0 +1,59 @@
+[Compatibility]
+libIGCM=1.0
+
+[UserChoices]
+
+# Specify output level for output files
+# Only the files stomate_history.nc and stomate_ipcc_history.nc can be set here.
+# output_level_filname=0     : lowest level writing only variables needed for the monitoring
+# output_level_filname=10    : highest level which will output all variables
+# output_level_filname=NONE  : deactivate the file
+output_level_stomate_history = 10
+output_level_stomate_ipcc_history = 1
+
+# Specify output frequency for each file [1y, 1mo, 1d]
+# Settings using WriteFrequency in config.card are not longer used
+output_freq_stomate_history = 1mo
+output_freq_stomate_ipcc_history = 1mo
+
+
+[InitialStateFiles]
+List=   ()
+
+[BoundaryFiles]
+List=	()
+ListNonDel= ()
+
+[SmoothFiles]
+List=	()
+
+[ParametersFiles]
+List=   ()
+
+[RestartFiles]
+List=	(stomate_rest_out.nc, stomate_rest.nc, stomate_rest_in.nc)
+
+[OutputText]
+List=   ()
+
+[OutputFiles]
+List=   (stomate_history.nc,      ${R_OUT_SBG_O_M}/${PREFIX}_1M_stomate_history.nc,      Post_1M_stomate_history),    \
+        (stomate_ipcc_history.nc, ${R_OUT_SBG_O_M}/${PREFIX}_1M_stomate_ipcc_history.nc, Post_1M_stomate_ipcc_history)
+
+[Post_1M_stomate_history]
+Patches = ()
+GatherWithInternal = (lon, lat, Areas, CONTFRAC, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (T2M_MONTH,RESOLUTION_X,RESOLUTION_Y,CONVFLUX,CFLUX_PROD10,CFLUX_PROD100,HARVEST_ABOVE)
+ChunckJob2D = NONE
+TimeSeriesVars3D = (LAI,VEGET_COV_MAX,NPP,GPP,HET_RESP,MAINT_RESP,GROWTH_RESP,AGE,HEIGHT,TOTAL_M,TOTAL_BM_LITTER,TOTAL_SOIL_CARB,CO2_FIRE,TOTAL_TURN,WOOD_HARVEST_PFT)
+ChunckJob3D = NONE
+Seasonal=ON
+
+[Post_1M_stomate_ipcc_history]
+Patches = ()
+GatherWithInternal = (lon, lat, Areas, CONTFRAC, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (cVeg, cLitter, cSoil, cProduct, lai, gpp, ra, npp, rh, fFire, fHarvest, fLuc, nbp, fVegLitter, fLitterSoil, cLeaf, cWood, cRoot, cMisc, cLitterAbove, cLitterBelow, cSoilFast, cSoilMedium, cSoilSlow, landCoverFrac, treeFracPrimDec, treeFracPrimEver, c3PftFrac, c4PftFrac, rGrowth, rMaint, nppLeaf, nppWood, nppRoot, nep, fWoodharvest)
+ChunckJob2D = NONE
+TimeSeriesVars3D=()
+ChunckJob3D = NONE
+Seasonal=ON
Index: /CONFIG/UNIFORM/v6/IPSLCM5A2CHT/EXPERIMENTS/LMDZORINCA/NMHC_AER/COMP/xios.card
===================================================================
--- /CONFIG/UNIFORM/v6/IPSLCM5A2CHT/EXPERIMENTS/LMDZORINCA/NMHC_AER/COMP/xios.card	(revision 4026)
+++ /CONFIG/UNIFORM/v6/IPSLCM5A2CHT/EXPERIMENTS/LMDZORINCA/NMHC_AER/COMP/xios.card	(revision 4026)
@@ -0,0 +1,29 @@
+[Compatibility]
+libIGCM=1.0
+
+[UserChoices]
+
+[InitialStateFiles]
+List=	()
+
+[BoundaryFiles]
+List=	()
+ListNonDel= ()
+
+[SmoothFiles]
+List=	()
+
+[ParametersFiles]
+List=	()
+
+[RestartFiles]
+List=	(NONE)
+
+[OutputText]
+List=   (xios_client_*,out_xios.x.err.*, out_xios.x.out.*)
+
+[OutputFiles]
+List=   ()
+
+
+
Index: /CONFIG/UNIFORM/v6/IPSLCM5A2CHT/EXPERIMENTS/LMDZORINCA/NMHC_AER/config.card
===================================================================
--- /CONFIG/UNIFORM/v6/IPSLCM5A2CHT/EXPERIMENTS/LMDZORINCA/NMHC_AER/config.card	(revision 4026)
+++ /CONFIG/UNIFORM/v6/IPSLCM5A2CHT/EXPERIMENTS/LMDZORINCA/NMHC_AER/config.card	(revision 4026)
@@ -0,0 +1,150 @@
+#- $Id: config.card 69 2007-06-21 14:08:22Z acosce $
+#========================================================================
+#D-- Carte pour run AR5WERF -- 
+#D-- Les fichiers sflx - aircraft - start - startphy créés par S. Szopa
+#D--
+#========================================================================
+#D-- Compatibility -
+[Compatibility]
+libIGCM=1.0
+#========================================================================
+#D-- UserChoices -
+[UserChoices]
+#============================
+#D-- (<8 chars MAX for JobName)
+JobName=L5OI5run
+SpaceName=PROD
+ExperimentName=NMHC_AER
+LongName='nouvelles configs + LMDZ5 INCA5 39 + Xios + possibilite nouvelle physique '
+TagName=LMDZORINCA
+#D- Choice of experiment in EXPERIEMENTS directory
+ExpType=LMDZORINCA/NMHC_AER
+#============================
+#D-- leap, noleap, 360d
+CalendarType=leap
+#D-- Début et fin de Job
+#D-- "YYYY-MM-DD"
+DateBegin=2006-01-01
+DateEnd=2006-12-31
+#============================
+#D-- 1Y, 1M, 5D, 1D
+PeriodLength=1M
+#============================
+#D-- ListOfComponents -
+[ListOfComponents]
+#D- For each component, Name of component, Tag of component
+ATM= (lmdz, LMDZ5)
+SRF= (orchidee, orchidee_1_9_5)
+SBG= (stomate, ORCHIDEE_1_9_5)
+CHM= (inca, INCA5) 
+IOS= (xios, XIOS)
+
+#========================================================================
+#D-- Executable -
+[Executable]
+Name=gcm.e
+#D- For each component, Real name of executable, Name of executable for oasis
+ATM= (gcm.e, gcm.e, 48MPI, 12OMP)
+SRF= ("", "")
+SBG= ("", "")
+CHM= ("", "")
+IOS= (xios_server.exe, xios.x, 1MPI)
+
+#========================================================================
+#D-- Restarts -
+[Restarts]
+#D- If you want a GENERAL RULE FOR RESTARTS, put this flag to 'y'
+OverRule=n
+#D- Last day of the experience used as restart
+RestartDate=2005-12-31
+#D- Define restart simulation name (=> JOB_OS)
+RestartJobName=LOI_AR5WERF_E0_2006
+#D- Path Server Group Login (=> PSGL)
+RestartPath=/ccc/work/cont003/dsm/p24cozic/INPUT_INCA/IGCM_OUT/LMDZORINCA/NMHC_AER
+# Attention login depend de la machine
+
+#========================================================================
+#D-- Post -
+[Post]
+#D- Do we rebuild parallel output, this flag determines
+#D- frequency of rebuild submission
+RebuildFrequency=NONE
+#D- Do we pack restart and debug txt files, this flag determines
+#D- frequency of pack submission (use NONE for DRYRUN=3)
+PackFrequency=1Y
+#D- If you want to produce time series, this flag determines
+#D- frequency of post-processing submission
+TimeSeriesFrequency=1Y
+#D- If you want to produce seasonal average, this flag determines
+#D- the period of this average
+SeasonalFrequency=NONE
+#D- Offset for seasonal average first start dates ; same unit as SeasonalFrequency
+#D- Usefull if you do not want to consider the first X simulation s years
+SeasonalFrequencyOffset=0
+
+#========================================================================
+#D-- ATM -
+[ATM]
+#
+WriteFrequency="1M 1D HF"
+# If config_Restarts_OverRule == 'n' all params are read
+Restart= n
+# Last day of the experience used as restart
+RestartDate=2000-01-01
+# Define restart simulation name
+RestartJobName=JobName
+RestartPath=${ARCHIVE}/IGCM_OUT/LMDZORINCA/NMHC_AER
+
+#========================================================================
+#D-- SRF -
+[SRF]
+# WriteFrequency is not used any more for ORCHIDEE 
+# Output files are now managed in orchidee.card 
+WriteFrequency=""
+Restart=n
+##-- Last day of the experience used as restart
+RestartDate=1999-12-30
+# Define restart simulation name
+RestartJobName=JobName
+RestartPath=${ARCHIVE}/IGCM_OUT/LMDZORINCA/NMHC_AER
+
+#========================================================================
+#D-- SBG - STOMATE
+[SBG]
+# WriteFrequency is not used any more for ORCHIDEE 
+# Output files are now managed in stomate.card 
+WriteFrequency=""
+# If config_Restarts_OverRule == 'n' next 4 params are read
+Restart=n
+#-- Last day of the experience used as restart for this component if Restart=y
+RestartDate=2000-01-31
+# Define restart simulation name for this component
+RestartJobName=EXP00
+RestartPath=${ARCHIVE}/IGCM_OUT/LMDZOR/DEVT/amip
+
+#========================================================================
+#D-- CHM -
+[CHM]
+#D-- choose inca writefrequency between 1D or 1M. it is not possible to cumulate both of them
+#D-- you can also manage the writefrequency in INCA/src/INCA_XML/file_*.xml files
+WriteFrequency="1D"
+Restart=n
+#D-- Last day of the experience used as restart
+RestartDate=2000-01-01
+#D-- Define restart simulation name
+RestartJobName=JobName
+RestartPath=${ARCHIVE}/IGCM_OUT/LMDZORINCA/NMHC_AER
+
+#========================================================================
+#D-- IOS -
+[IOS]
+WriteFrequency=""
+# If config_Restarts_OverRule == 'n' next 4 params are read
+Restart= n
+##-- Last day of the experience used as restart for this component if Restart=y
+RestartDate=
+# Define restart simulation name for this component
+RestartJobName=
+RestartPath=
+
+#========================================================================
Index: /CONFIG/UNIFORM/v6/IPSLCM5A2CHT/EXPERIMENTS/LMDZORINCA/NMHC_AER_S/COMP/inca.card
===================================================================
--- /CONFIG/UNIFORM/v6/IPSLCM5A2CHT/EXPERIMENTS/LMDZORINCA/NMHC_AER_S/COMP/inca.card	(revision 4026)
+++ /CONFIG/UNIFORM/v6/IPSLCM5A2CHT/EXPERIMENTS/LMDZORINCA/NMHC_AER_S/COMP/inca.card	(revision 4026)
@@ -0,0 +1,153 @@
+#- $Id: inca.card 70 2007-06-21 14:20:42Z acosce $
+[Compatibility]
+libIGCM=1.0
+
+[UserChoices]
+# Set LMDZ_10m_winds to choose if the simulation will use online 10m wind (=y) or offline (=n)
+LMDZ_10m_winds=y
+# Set 10m_Winds_method to choose which way we will use to work with 10m wind from gcm (so if LMDZ_10m_winds=y)
+#10m_winds_method=weibull10 --> use weibull method for 10m wind from gcm,
+#10m_winds_method=threshold --> use threshold method for 10m wind from gcm
+10m_winds_method=threshold
+#choose threshold or weibull10 parameter value
+wind_parameter=0.85
+# heat fluxes computed with feedback corresponding to 0 --> no aerosol effects, 1--> aerosol effects selected by ok_ade, ok_aie
+feedb=0
+#choose sedimentation multilayer or one layer 
+multilayer_sedim=y
+#coupled model with ORCH
+#if yes, you need to put to CHEMISTRY_BVOC=y in orchidee.def and decomment lines for fertilizer and bbg in orchidee.card
+CoupOrchInca=n
+#active or not chemistry flux in output 
+calcul_flux=n
+#choose which type of aircraft you will use (0 - 1 - 2 - 3) (no aircraft / old inca aircraft / new subsonic inca aircraft / subsonic + hypersonic inca aircraft)
+flag_plane=2
+#choose which time interpolation you want to interpolate sflx file. ( 0 - 1 - 2) (no interpolation / point to point interpolation / Sheng & Zwiers interpolation) 
+#be careful name of sflx file change with the choice of emi_interp_time ( no file / sflx_p2p.nc / sflx_SZ.nc ) 
+emi_interp_time=1
+
+
+# Use XIOS and/or IOIPSL as output library
+XIOS=y
+IOIPSL=n
+
+[InitialStateFiles]
+List= ()
+	
+[BoundaryFiles]
+#List=	    (/ccc/work/cont003/subipsl/subipsl/ECMWF320x160/AN${year}/165_${year}${month}.nc      , u10mec.nc)\
+#	    (/ccc/work/cont003/subipsl/subipsl/ECMWF320x160/AN${year}/166_${year}${month}.nc      , v10mec.nc)\
+#	    (${R_IN}/ATM/${RESOL_ATM}/NUDGE_FILES/ERAI/AN${year}/u10m_ecmwf_${year}${month}.nc , u10m.nc  )\
+#	    (${R_IN}/ATM/${RESOL_ATM}/NUDGE_FILES/ERAI/AN${year}/v10m_ecmwf_${year}${month}.nc , v10m.nc  )
+List=()
+
+    
+ListNonDel= (${R_IN}/CHM/INCA${RESOL_CHM}/npp.nc					,   npp.nc              )\
+            (${R_IN}/CHM/INCA${RESOL_CHM}/STRAT/o3clim_lmdz_phy_2000.nc            	,   o3clim.nc     	)\
+            (${R_IN}/CHM/INCA${RESOL_CHM}/STRAT/o3coeff_lmdz_phy.nc                	,   o3lin.nc		)\
+            (${R_IN}/CHM/INCA${RESOL_CHM}/STRAT/SAD_Pa/sadclim_lmdz_phy_${year}.nc 	,   sad.nc		)\
+            (${R_IN}/CHM/INCA${RESOL_CHM}/STRAT/lglived.dat                        	,   lglived.dat		)\
+            (/ccc/work/cont003/gen2201/p24haug/INPUT/CMIP6/aircraft_2000_phy.nc     ,   aircraft_mth.nc     )\
+            (${R_IN}/CHM/INCA${RESOL_CHM}/STRAT/hikari_zero_lmdz_phy.nc    		,   aircraft_hs.nc      )\
+            (/ccc/work/cont003/gen2201/p24haug/INPUT/CMIP6/sflx_lmdz_GHG_phy.nc,        sflx_GHG.nc         )\
+            (/ccc/work/cont003/gen2201/p24haug/INPUT/CMIP6/sflx_lmdz_MISC_phy.nc,       sflx_MISC.nc        )\
+            (/ccc/work/cont003/gen2201/p24haug/INPUT/CMIP6/sflx_lmdz_NAT_phy.nc,        sflx_NAT.nc         )\
+            (/ccc/work/cont003/gen2201/p24haug/INPUT/CMIP6/sflx_lmdz_ANT_2000_phy.nc,   sflx_ANT.nc         )\
+            (/ccc/work/cont003/gen2201/p24haug/INPUT/CMIP6/sflx_lmdz_BBG_2000_phy.nc,   sflx_BBG.nc         )\
+            (${R_IN}/CHM/INCA${RESOL_CHM}/landuse.nc   					,   landuse.nc          )\
+            (${R_IN}/CHM/INCA${RESOL_CHM}/rhvEC.txt        				,   rhvEC.txt           )\
+            (${R_IN}/CHM/INCA${RESOL_CHM}/wthEC.txt        				,   wthEC.txt           )\
+            (${R_IN}/CHM/INCA${RESOL_CHM}/clyEC.txt        				,   clyEC.txt           )\
+            (${R_IN}/CHM/INCA${RESOL_CHM}/wth.dat          				,   wth.dat             )\
+            (${R_IN}/CHM/INCA${RESOL_CHM}/cly.dat          				,   cly.dat             )\
+            (${R_IN}/CHM/INCA${RESOL_CHM}/rhv.dat          				,   rhv.dat             )\
+ 	    (${R_IN}/CHM/INCA${RESOL_CHM}/new_phototable.dat   					,   phototable.dat	)
+
+
+[ParametersFiles]
+List=	(${SUBMIT_DIR}/PARAM/inca.def					, .			),\
+	(${MODIPSL}/modeles/INCA/src/INCA_XML/context_inca.xml		, .			),\
+	(${MODIPSL}/modeles/INCA/src/INCA_XML/field_def_inca.xml        , .			),\
+	(${MODIPSL}/modeles/INCA/src/INCA_XML/file_def_inca_NMHC_AER_daily.xml, file_def_inca_daily.xml	),\
+	(${MODIPSL}/modeles/INCA/src/INCA_XML/file_def_inca_NMHC_AER_monthly.xml, file_def_inca_monthly.xml	),\
+    	(${MODIPSL}/bin/inca.dat					, .			)
+
+[RestartFiles]
+# List restart that have to be saved/restored each loop (file out, saved, and in) :
+List= (reprecipinsoil.dat, precipinsoil.dat, precipinsoil.dat) 
+
+
+[OutputText]
+List=(inca.out, inca.def,context_inca.xml,field_def_inca.xml,file_def_inca_daily.xml,file_def_inca_monthly.xml, inca_IDxml.out)
+
+[OutputFiles]
+List=	(inca1d_emi.nc     	,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_emi.nc     	,  NONE                  ),\
+	(inca1d_species.nc 	,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_species.nc 	,  Post_1D_inca_species  ),\
+	(inca1d_dep.nc    	,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_dep.nc    	,  NONE                  ),\
+	(inca1d_chem.nc    	,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_chem.nc    	,  Post_1D_inca_chem     ),\
+	(inca1d_aero.nc    	,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_aero.nc    	,  Post_1D_inca_aero     ),\
+	(inca1d_phtrate.nc 	,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_phtrate.nc 	,  NONE  		 ),\
+	(inca1d_reacflux.nc	,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_reacflux.nc	,  NONE                  ),\
+	(inca1d_washrate.nc	,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_washrate.nc	,  NONE                  ),\
+	(inca1d_forcage.nc 	,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_forcage.nc 	,  Post_1D_inca_forcage  ),\
+	(inca1d_veget.nc   	,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_veget.nc   	,  Post_1D_inca_veget    ),\
+	(inca1m_emi.nc     	,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_emi.nc     	,  NONE                  ),\
+	(inca1m_species.nc 	,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_species.nc 	,  NONE                  ),\
+	(inca1m_dep.nc    	,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_dep.nc    	,  NONE                  ),\
+	(inca1m_chem.nc    	,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_chem.nc    	,  NONE                  ),\
+	(inca1m_aero.nc    	,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_aero.nc    	,  NONE                  ),\
+	(inca1m_phtrate.nc 	,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_phtrate.nc 	,  NONE  		 ),\
+	(inca1m_reacflux.nc	,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_reacflux.nc	,  NONE                  ),\
+	(inca1m_washrate.nc	,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_washrate.nc	,  NONE                  ),\
+	(inca1m_forcage.nc 	,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_forcage.nc 	,  NONE                  ),\
+	(inca1m_veget.nc   	,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_veget.nc   	,  NONE                  ),\
+	(inca_forcagelmdz.nc	,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_forcagelmdz.nc,  NONE			 ),\
+	(inca_oxydants.nc	,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_oxydants.nc	,  NONE                  ) 
+
+
+
+[Post_1D_inca_aero]
+Patches= ()
+GatherWithInternal = (lon, lat, presnivs, time_centered, time_centered_bounds, time_counter, area)
+TimeSeriesVars2D = (od550bcas,od550oaas,od550so4as, od550so4cs, od550ssas,od550ssss, od550sscs,od550dustci,od550bcai,od550oaai, loaddustci, loadno3ci, loadbcai, loadoaai, loadsscs, loadso4cs, loadno3cs, loadssas, loadbcas, loadoaas, loadso4as, loadnh4as, loadno3as, loadssss)
+ChunckJob2D = NONE
+TimeSeriesVars3D = ()
+ChunckJob3D = NONE
+Seasonal=OFF
+
+[Post_1D_inca_species]
+Patches= ()
+GatherWithInternal = (lon, lat, presnivs, time_centered, time_centered_bounds,time_counter, area)
+TimeSeriesVars2D = ()
+ChunckJob2D = NONE
+TimeSeriesVars3D = (vmrno,vmrno2,vmro3,vmrch4,vmrco,,mmrso4cs, mmrso4as, mmrdms, mmrssss, vmrno3, vmrhno3, mmrbcai, mmrdustci)
+ChunckJob3D = NONE
+Seasonal=OFF
+
+
+[Post_1D_inca_chem]
+Patches= ()
+GatherWithInternal = (lon, lat, presnivs,time_centered, time_centered_bounds, time_counter, area)
+TimeSeriesVars2D = (colo3, colco, colno2, colch2o, colch4, colhno2, coloh, colso2)
+ChunckJob2D = NONE
+TimeSeriesVars3D = ()
+ChunckJob3D = NONE
+Seasonal=OFF
+
+[Post_1D_inca_forcage]
+Patches= ()
+GatherWithInternal = (lon, lat, presnivs, time_centered, time_centered_bounds,time_counter, area)
+TimeSeriesVars2D = (SWTOAAS_ANT, SWTOAAS_AER, SWTOAAS_NAT, SWTOAAS_BC, SWTOAAS_SO4, SWTOAAS_POM, SWTOAAS_DUST, SWTOAAS_SS, SWTOAAS_DNO3, SWTOASS_SNO3,  SWTOAAS_FNO3)
+ChunckJob2D = NONE
+TimeSeriesVars3D = ()
+ChunckJob3D = NONE
+Seasonal=OFF
+
+[Post_1D_inca_veget]
+Patches= ()
+GatherWithInternal = (lon, lat, veget, time_counter)
+TimeSeriesVars2D = (hdry,snowfromOrch,emi_isop,emi_mono)
+ChunckJob2D = NONE
+TimeSeriesVars3D = (flx_iso,flx_mono,flx_ORVOC,flx_acetal)
+ChunckJob3D = NONE
+Seasonal=OFF
Index: /CONFIG/UNIFORM/v6/IPSLCM5A2CHT/EXPERIMENTS/LMDZORINCA/NMHC_AER_S/COMP/lmdz.card
===================================================================
--- /CONFIG/UNIFORM/v6/IPSLCM5A2CHT/EXPERIMENTS/LMDZORINCA/NMHC_AER_S/COMP/lmdz.card	(revision 4026)
+++ /CONFIG/UNIFORM/v6/IPSLCM5A2CHT/EXPERIMENTS/LMDZORINCA/NMHC_AER_S/COMP/lmdz.card	(revision 4026)
@@ -0,0 +1,122 @@
+#- $Id: lmdz.card 70 2007-06-21 14:20:42Z acosce $
+[Compatibility]
+libIGCM=1.0
+
+[UserChoices]
+# Physics package to use :
+# LMDZ_Physics=AP for standard/old physics(defalut), can be used with LMDZ4_AR5 or LMDZ5/trunk sources
+# LMDZ_Physics=NPv3.2 for new physics, to be used with LMDZ5/trunk revision 1554 or later
+# LMDZ_Physics=NPv5.4 for new physics to be used with LMDZ5/trunk revision 2449 or later
+# LMDZ_Physics=NPv5.67 for new physics to be used with LMDZ5/testing revision 2546 or later
+# LMDZ_Physics=NPv5.70 for new physics to be used with LMDZ5/testing revision 2595 or later
+# LMDZ_Physics=NPv5.80bz0 for new physics to be used with LMDZ5/trunk revision 2699 or later
+LMDZ_Physics=AP
+
+# Activate the call to phytrac to run tracer simulation 
+iflag_phytrac=1
+
+# Use XIOS as output library
+XIOS=y
+
+# Set the variable CREATE needed further below to find the initial and boundary condition files.
+CREATE=ELC-${RESOL_ATM_3D}
+
+# ByPass_hgardfou_teta=y : modify teta_ parameters for following CumulPeriod only
+ByPass_hgardfou_teta=n
+
+# ByPass_hgardfou_mats=y : set parameter purmats=y for following CumulPeriod only
+ByPass_hgardfou_mats=n
+
+# Set ConfType to choose parameters for aerosols, solar and green house gazes. 
+# The parameter file PARAM/config.def_$ConfType will be used.
+# ConfType=preind/actuel/annuel
+ConfType=actuel
+
+# manage radiative aerosol effect and ozone 
+flag_aerosol=6
+ok_ade=y
+ok_aie=n
+aerosol_couple=y
+chemistry_couple=y
+read_climoz=0
+ok_cdnc=y
+
+# Set OutLevel to choose the level of output for LMDZ. 
+# OutLevel=low/medium/high
+OutLevel=low
+
+# COSP activation and choose of output frequency for COSP (monthly, daily, HF) = y/n
+LMDZ_COSP_OK=n
+LMDZ_COSP_monthly=n
+LMDZ_COSP_daily=n
+LMDZ_COSP_hf=n
+
+# Set NMC Outputs frequency (monthly, daily, HF) = y/n
+LMDZ_NMC_monthly=n
+LMDZ_NMC_daily=n
+LMDZ_NMC_hf=n
+
+
+# Nugding : ok_guide=y/n
+# If ok_guide=y, add nudging files(u.nc, v.nc, hur.nc,...) in BoundaryFiles section below.
+ok_guide=n
+
+
+[InitialStateFiles]
+List= 	(${R_IN}/CHM/INCA${RESOL_CHM}/start_o2a_noTer.nc	, start.nc	) \
+	(${R_IN}/CHM/INCA${RESOL_CHM}/startphy_o2a_noTer.nc	, startphy.nc	)
+
+
+[BoundaryFiles]
+List=   (${R_IN}/ATM/LIMIT/ERAI/interpol/96x95_ORCA2.3_gregorian/limit_${year}.nc , limit.nc)
+
+#	(${R_IN}/ATM/${RESOL_ATM}/NUDGE_FILES/ERAI/AN${year}/u_ecmwf_${year}${month}.nc 	, u.nc		),\
+#	(${R_IN}/ATM/${RESOL_ATM}/NUDGE_FILES/ERAI/AN${year}/v_ecmwf_${year}${month}.nc 	, v.nc		)
+ 
+ListNonDel= ()
+
+[ParametersFiles]
+List=   (${SUBMIT_DIR}/PARAM/physiq.def_${LMDZ_Physics}, physiq.def),       \
+        (${SUBMIT_DIR}/PARAM/gcm.def_${RESOL_ATM_XY}_${LMDZ_Physics},    gcm.def),          \
+        (${SUBMIT_DIR}/PARAM/vert.def_L${RESOL_ATM_Z},   vert.def),         \
+        (${MODIPSL}/modeles/LMDZ/DefLists/cosp_input_nl.txt, .),            \
+        (${MODIPSL}/modeles/LMDZ/DefLists/cosp_output_nl.txt, .),           \
+        (${SUBMIT_DIR}/PARAM/config.def_${ConfType},  config.def),          \
+        (${SUBMIT_DIR}/PARAM/guide.def, .),                                 \
+        (${SUBMIT_DIR}/PARAM/run.def, .),                                   \
+        (${SUBMIT_DIR}/PARAM/iodef.xml, . ),                                \
+	(${SUBMIT_DIR}/PARAM/traceur.def_h2o_${LMDZ_Physics}, traceur.def), \
+        (${MODIPSL}/modeles/LMDZ/DefLists/context_lmdz.xml, . ),            \
+        (${MODIPSL}/modeles/LMDZ/DefLists/field_def_lmdz.xml, . ),	    \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histmth_lmdz.xml, . ),   \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histmthCOSP_lmdz.xml, .),\
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histmthNMC_lmdz.xml, . ),\
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histday_lmdz.xml, . ),   \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histdayCOSP_lmdz.xml, .),\
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histdayNMC_lmdz.xml, . ),\
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histhf_lmdz.xml, . ),    \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histhfCOSP_lmdz.xml, .), \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histhfNMC_lmdz.xml, . ), \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histstn_lmdz.xml, . ),   \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histstrataer_lmdz.xml, . ),\
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histins_lmdz.xml, . ),   \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histLES_lmdz.xml, . )
+
+[RestartFiles]
+List=	(restart.nc, restart.nc, start.nc), \
+	(restartphy.nc, restartphy.nc,  startphy.nc) 
+
+[OutputText]
+List=   (physiq.def, gcm.def, vert.def, run.def, traceur.def, guide.def, config.def, used_run.def, iodef.xml, context_lmdz.xml, field_def_lmdz.xml, file_def_*lmdz.xml, debug.01, lmdz.prt, out_gcm.e.err, out_gcm.e.out)
+
+[OutputFiles]
+List=	(histmth.nc,      ${R_OUT_ATM_O_M}/${PREFIX}_1M_histmth.nc,   Post_1M_histmth   )	
+
+[Post_1M_histmth]
+Patches= ()
+GatherWithInternal = (lon, lat, presnivs, time_counter, time_centered, time_centered_bounds, aire)
+TimeSeriesVars2D = (bils, cldh, cldl, cldm, cldq, cldt, evap, flat, ftime_con, iwp, lwp, LWdnSFC, LWdnSFCclr, LWupSFCclr, LWdn200, LWdn200clr, LWup200, LWup200clr, precip, prw, pluc, psol, q2m, rh2m, sens, sicf, slp, snow, soll0, soll, sols0, sols, SWdnSFC, SWupSFC, SWup200, SWdnTOA, SWupTOA, SWdn200, SWdnSFCclr, SWupSFCclr, SWupTOAclr, t2m, t2m_max, t2m_min, taux, taux_ter, taux_sic, taux_lic, taux_oce, tauy, tauy_ter, tauy_sic, tauy_lic, tauy_oce, lat_ter, lat_sic, lat_lic, lat_oce, nettop, pbase, ptop, topl0, topl, tops0, tops, topswad, topswai, tsol, tsol_ter, tsol_lic, tsol_oce, tsol_sic , u10m, u500, v10m, v500, w500, pourc_ter, pourc_oce, pourc_sic, pourc_lic, wind10m, od550aer, od550lt1aer, absvisaer, loadoa, loadbc, loadso4, loaddust, loadss, sconcoa, sconcbc, sconcso4, sconcdust, sconcss, reffclwtop, cldncl, swtoaas_ant, swtoacs_ant, swtoacf_ant, swsrfas_ant, swsrfcs_ant, swsrfcf_ant, swtoaas_nat, swtoacs_nat, swtoacf_nat, swsrfas_nat, swsrfcs_nat, swsrfcf_nat, solswai, solswad, swtoacf_zero, swsrfcf_zero)
+ChunckJob2D = 100Y
+TimeSeriesVars3D = (upwd, lwcon, iwcon, lcc3dcon, lcc3dstra, temp, theta, ovap, ovapinit, geop, vitu, vitv, vitw, pres, rneb, rnebcon, rhum, mc, paprs, scdnc, ec550aer, concoa, concbc, concso4, concss, concdust, reffclws, reffclwc, tnt, dtdyn, dtphy, dtlschr, tntr, tntscpbl, tnhus, dqdyn, dqvdf, tnhusscpbl, dqphy, evu, mcd)
+ChunckJob3D = 100Y
+Seasonal=ON
Index: /CONFIG/UNIFORM/v6/IPSLCM5A2CHT/EXPERIMENTS/LMDZORINCA/NMHC_AER_S/COMP/orchidee.card
===================================================================
--- /CONFIG/UNIFORM/v6/IPSLCM5A2CHT/EXPERIMENTS/LMDZORINCA/NMHC_AER_S/COMP/orchidee.card	(revision 4026)
+++ /CONFIG/UNIFORM/v6/IPSLCM5A2CHT/EXPERIMENTS/LMDZORINCA/NMHC_AER_S/COMP/orchidee.card	(revision 4026)
@@ -0,0 +1,85 @@
+[Compatibility]
+libIGCM=1.0
+
+[UserChoices]
+# The variable DefSuffix gives the suffix of the orchidee.def file to be used.
+# By default the file orchidee.def_Choi will be selected.
+# Sef DefSuffix=Choi (default) to activate default 2-layer Choisnel hydrology
+# Set DefSuffix=CWRR to activate 11-layer CWRR hydrology
+DefSuffix=CWRR
+
+VEGET_UPDATE=1Y
+
+
+# Specify output level for output files
+# Only the files sechiba_history.nc, sechiba_out_2.nc and sechiba_history_4dim.nc can be set here.
+# output_level_filename=0     : lowest level writing only variables needed for the monitoring
+# output_level_filename=12    : highest level which will output all variables
+# output_level_filename=NONE  : deactivate the file
+output_level_sechiba_history = 11
+output_level_sechiba_out_2 = NONE
+output_level_sechiba_history_4dim = 11
+
+# Specify output frequency for each file [1y, 1mo, 1d, 10800s, 1ts]
+# Settings using WriteFrequency in config.card is not longer used
+output_freq_sechiba_history = 1mo
+output_freq_sechiba_out_2 = 10800s
+output_freq_sechiba_history_4dim = 1mo
+
+
+[InitialStateFiles]
+List=	(${R_IN}/SRF/soils_param.nc,        . ), \
+	(${R_IN}/SRF/reftemp.nc, . ), \
+	(${R_IN}/SRF/routing.nc, . ), \
+        (${R_IN}/SRF/albedo/alb_bg_modisopt_2D_ESA_v2.nc, alb_bg.nc ), \
+        (${R_IN}/SRF/cartepente2d_15min.nc, .)
+
+[BoundaryFiles]
+List= (${R_IN}/SRF/PFTMAPS/CMIP6/ESA-LUH2v2/historical/15PFT.v1/PFTmap_${year}.nc, PFTmap.nc) ,\
+      (${R_IN}/SRF/WOODHARVEST/LUH2v2/historical/woodharvest_${year}.nc, woodharvest.nc)
+ListNonDel= ()
+
+
+# to decomment if we want to calcul bvoc - for this we need to activate CHEMISTRY_BVOC in orchidee.def_Choi
+#ListNonDel= (${R_IN}/SRF/chemistry/orchidee_fertilizer_1995.nc, .), \
+#            (${R_IN}/SRF/chemistry/orchidee_bbg_clim.nc, .)
+
+[SmoothFiles]
+List= ()
+
+[ParametersFiles]
+List=	(${SUBMIT_DIR}/PARAM/orchidee.def_${DefSuffix}, orchidee.def)   ,\
+	(${MODIPSL}/modeles/ORCHIDEE/src_xml/file_def_orchidee.xml, .)  ,\
+	(${MODIPSL}/modeles/ORCHIDEE/src_xml/file_def_input_orchidee.xml, .) ,\
+	(${MODIPSL}/modeles/ORCHIDEE/src_xml/context_orchidee.xml, .)   ,\
+	(${MODIPSL}/modeles/ORCHIDEE/src_xml/field_def_orchidee.xml, .)
+
+[RestartFiles]
+List=	(sechiba_rest_out.nc, sechiba_rest.nc, sechiba_rest_in.nc)
+
+[OutputText]
+List=   (out_orchidee, orchidee.def, used_orchidee.def, iodef.xml, context_orchidee.xml, field_def_orchidee.xml, file_def_orchidee.xml, river_desc.nc, file_def_input_orchidee.xml)
+
+[OutputFiles]
+List=   (sechiba_history.nc,   ${R_OUT_SRF_O_M}/${PREFIX}_1M_sechiba_history.nc, Post_1M_sechiba_history), \
+        (sechiba_history_4dim.nc,${R_OUT_SRF_O_M}/${PREFIX}_1M_sechiba_history_4dim.nc, NONE), \
+        (sechiba_out_2.nc,     ${R_OUT_SRF_O_H}/${PREFIX}_HF_sechiba_out_2.nc,   NONE)
+
+[Post_1M_sechiba_history]
+Patches = ()
+GatherWithInternal = (lon, lat, time_counter, Areas, Contfrac, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (nobiofrac, alb_nir, alb_vis, evap, fluxlat, fluxsens, netrad, qair, rain, runoff, snow, snownobio, snowf, frac_snow, subli, tair, temp_sol, tsol_max, tsol_min, drainage,mrsos, mrso, mrros, mrro, prveg, evspsblveg, evspsblsoi, tran, treeFrac, grassFrac, cropFrac, baresoilFrac, residualFrac, TWBR, riverflow, coastalflow, DelSoilMoist_daily, DelIntercept_daily, DelSWE_daily, delstock_routing, snowmelt, LAImean, transpir, evapnu)
+ChunckJob2D = NONE
+TimeSeriesVars3D = (lai, maxvegetfrac, vegetfrac, ptn, nee)
+ChunckJob3D = NONE
+Seasonal = ON
+
+[Post_HF_sechiba_out_2]
+Patches = ()
+GatherWithInternal = (lon, lat, time_counter, Areas, Contfrac, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (mrsos, mrro)
+ChunckJob2D = 50Y
+TimeSeriesVars3D = (ptn)
+ChunckJob3D = 10Y
+Seasonal = OFF
+
Index: /CONFIG/UNIFORM/v6/IPSLCM5A2CHT/EXPERIMENTS/LMDZORINCA/NMHC_AER_S/COMP/stomate.card
===================================================================
--- /CONFIG/UNIFORM/v6/IPSLCM5A2CHT/EXPERIMENTS/LMDZORINCA/NMHC_AER_S/COMP/stomate.card	(revision 4026)
+++ /CONFIG/UNIFORM/v6/IPSLCM5A2CHT/EXPERIMENTS/LMDZORINCA/NMHC_AER_S/COMP/stomate.card	(revision 4026)
@@ -0,0 +1,59 @@
+[Compatibility]
+libIGCM=1.0
+
+[UserChoices]
+
+# Specify output level for output files
+# Only the files stomate_history.nc and stomate_ipcc_history.nc can be set here.
+# output_level_filname=0     : lowest level writing only variables needed for the monitoring
+# output_level_filname=10    : highest level which will output all variables
+# output_level_filname=NONE  : deactivate the file
+output_level_stomate_history = 10
+output_level_stomate_ipcc_history = 1
+
+# Specify output frequency for each file [1y, 1mo, 1d]
+# Settings using WriteFrequency in config.card are not longer used
+output_freq_stomate_history = 1mo
+output_freq_stomate_ipcc_history = 1mo
+
+
+[InitialStateFiles]
+List=   ()
+
+[BoundaryFiles]
+List=	()
+ListNonDel= ()
+
+[SmoothFiles]
+List=	()
+
+[ParametersFiles]
+List=   ()
+
+[RestartFiles]
+List=	(stomate_rest_out.nc, stomate_rest.nc, stomate_rest_in.nc)
+
+[OutputText]
+List=   ()
+
+[OutputFiles]
+List=   (stomate_history.nc,      ${R_OUT_SBG_O_M}/${PREFIX}_1M_stomate_history.nc,      Post_1M_stomate_history),    \
+        (stomate_ipcc_history.nc, ${R_OUT_SBG_O_M}/${PREFIX}_1M_stomate_ipcc_history.nc, Post_1M_stomate_ipcc_history)
+
+[Post_1M_stomate_history]
+Patches = ()
+GatherWithInternal = (lon, lat, Areas, CONTFRAC, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (T2M_MONTH,RESOLUTION_X,RESOLUTION_Y,CONVFLUX,CFLUX_PROD10,CFLUX_PROD100,HARVEST_ABOVE)
+ChunckJob2D = NONE
+TimeSeriesVars3D = (LAI,VEGET_COV_MAX,NPP,GPP,HET_RESP,MAINT_RESP,GROWTH_RESP,AGE,HEIGHT,TOTAL_M,TOTAL_BM_LITTER,TOTAL_SOIL_CARB,CO2_FIRE,TOTAL_TURN,WOOD_HARVEST_PFT)
+ChunckJob3D = NONE
+Seasonal=ON
+
+[Post_1M_stomate_ipcc_history]
+Patches = ()
+GatherWithInternal = (lon, lat, Areas, CONTFRAC, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (cVeg, cLitter, cSoil, cProduct, lai, gpp, ra, npp, rh, fFire, fHarvest, fLuc, nbp, fVegLitter, fLitterSoil, cLeaf, cWood, cRoot, cMisc, cLitterAbove, cLitterBelow, cSoilFast, cSoilMedium, cSoilSlow, landCoverFrac, treeFracPrimDec, treeFracPrimEver, c3PftFrac, c4PftFrac, rGrowth, rMaint, nppLeaf, nppWood, nppRoot, nep, fWoodharvest)
+ChunckJob2D = NONE
+TimeSeriesVars3D=()
+ChunckJob3D = NONE
+Seasonal=ON
Index: /CONFIG/UNIFORM/v6/IPSLCM5A2CHT/EXPERIMENTS/LMDZORINCA/NMHC_AER_S/COMP/xios.card
===================================================================
--- /CONFIG/UNIFORM/v6/IPSLCM5A2CHT/EXPERIMENTS/LMDZORINCA/NMHC_AER_S/COMP/xios.card	(revision 4026)
+++ /CONFIG/UNIFORM/v6/IPSLCM5A2CHT/EXPERIMENTS/LMDZORINCA/NMHC_AER_S/COMP/xios.card	(revision 4026)
@@ -0,0 +1,29 @@
+[Compatibility]
+libIGCM=1.0
+
+[UserChoices]
+
+[InitialStateFiles]
+List=	()
+
+[BoundaryFiles]
+List=	()
+ListNonDel= ()
+
+[SmoothFiles]
+List=	()
+
+[ParametersFiles]
+List=	()
+
+[RestartFiles]
+List=	(NONE)
+
+[OutputText]
+List=   (xios_client_*,out_xios.x.err.*, out_xios.x.out.*)
+
+[OutputFiles]
+List=   ()
+
+
+
Index: /CONFIG/UNIFORM/v6/IPSLCM5A2CHT/EXPERIMENTS/LMDZORINCA/NMHC_AER_S/config.card
===================================================================
--- /CONFIG/UNIFORM/v6/IPSLCM5A2CHT/EXPERIMENTS/LMDZORINCA/NMHC_AER_S/config.card	(revision 4026)
+++ /CONFIG/UNIFORM/v6/IPSLCM5A2CHT/EXPERIMENTS/LMDZORINCA/NMHC_AER_S/config.card	(revision 4026)
@@ -0,0 +1,150 @@
+#- $Id: config.card 69 2007-06-21 14:08:22Z acosce $
+#========================================================================
+#D-- Carte pour run AR5WERF -- 
+#D-- Les fichiers sflx - aircraft - start - startphy créés par S. Szopa
+#D--
+#========================================================================
+#D-- Compatibility -
+[Compatibility]
+libIGCM=1.0
+#========================================================================
+#D-- UserChoices -
+[UserChoices]
+#============================
+#D-- (<8 chars MAX for JobName)
+JobName=L5OI5run
+SpaceName=PROD
+ExperimentName=NMHC_AER_S
+LongName='nouvelles configs + LMDZ5 INCA5 39 + Xios + possibilite nouvelle physique '
+TagName=LMDZORINCA
+#D- Choice of experiment in EXPERIEMENTS directory
+ExpType=LMDZORINCA/NMHC_AER_S
+#============================
+#D-- leap, noleap, 360d
+CalendarType=leap
+#D-- Début et fin de Job
+#D-- "YYYY-MM-DD"
+DateBegin=2006-01-01
+DateEnd=2006-12-31
+#============================
+#D-- 1Y, 1M, 5D, 1D
+PeriodLength=1M
+#============================
+#D-- ListOfComponents -
+[ListOfComponents]
+#D- For each component, Name of component, Tag of component
+ATM= (lmdz, LMDZ5)
+SRF= (orchidee, orchidee_1_9_5)
+SBG= (stomate, ORCHIDEE_1_9_5)
+CHM= (inca, INCA5) 
+IOS= (xios, XIOS)
+
+#========================================================================
+#D-- Executable -
+[Executable]
+Name=gcm.e
+#D- For each component, Real name of executable, Name of executable for oasis
+ATM= (gcm.e, gcm.e, 48MPI, 12OMP)
+SRF= ("", "")
+SBG= ("", "")
+CHM= ("", "")
+IOS= (xios_server.exe, xios.x, 1MPI)
+
+#========================================================================
+#D-- Restarts -
+[Restarts]
+#D- If you want a GENERAL RULE FOR RESTARTS, put this flag to 'y'
+OverRule=n
+#D- Last day of the experience used as restart
+RestartDate=2005-12-31
+#D- Define restart simulation name (=> JOB_OS)
+RestartJobName=LOI_AR5WERF_E0_2006
+#D- Path Server Group Login (=> PSGL)
+RestartPath=/ccc/work/cont003/dsm/p24cozic/INPUT_INCA/IGCM_OUT/LMDZORINCA/NMHC_AER
+# Attention login depend de la machine
+
+#========================================================================
+#D-- Post -
+[Post]
+#D- Do we rebuild parallel output, this flag determines
+#D- frequency of rebuild submission
+RebuildFrequency=NONE
+#D- Do we pack restart and debug txt files, this flag determines
+#D- frequency of pack submission (use NONE for DRYRUN=3)
+PackFrequency=1Y
+#D- If you want to produce time series, this flag determines
+#D- frequency of post-processing submission
+TimeSeriesFrequency=1Y
+#D- If you want to produce seasonal average, this flag determines
+#D- the period of this average
+SeasonalFrequency=NONE
+#D- Offset for seasonal average first start dates ; same unit as SeasonalFrequency
+#D- Usefull if you do not want to consider the first X simulation s years
+SeasonalFrequencyOffset=0
+
+#========================================================================
+#D-- ATM -
+[ATM]
+#
+WriteFrequency="1M 1D HF"
+# If config_Restarts_OverRule == 'n' all params are read
+Restart= n
+# Last day of the experience used as restart
+RestartDate=2000-01-01
+# Define restart simulation name
+RestartJobName=JobName
+RestartPath=${ARCHIVE}/IGCM_OUT/LMDZORINCA/NMHC_AER
+
+#========================================================================
+#D-- SRF -
+[SRF]
+# WriteFrequency is not used any more for ORCHIDEE 
+# Output files are now managed in orchidee.card 
+WriteFrequency=""
+Restart=n
+##-- Last day of the experience used as restart
+RestartDate=1999-12-30
+# Define restart simulation name
+RestartJobName=JobName
+RestartPath=${ARCHIVE}/IGCM_OUT/LMDZORINCA/NMHC_AER
+
+#========================================================================
+#D-- SBG - STOMATE
+[SBG]
+# WriteFrequency is not used any more for ORCHIDEE 
+# Output files are now managed in stomate.card 
+WriteFrequency=""
+# If config_Restarts_OverRule == 'n' next 4 params are read
+Restart=n
+#-- Last day of the experience used as restart for this component if Restart=y
+RestartDate=2000-01-31
+# Define restart simulation name for this component
+RestartJobName=EXP00
+RestartPath=${ARCHIVE}/IGCM_OUT/LMDZOR/DEVT/amip
+
+#========================================================================
+#D-- CHM -
+[CHM]
+#D-- choose inca writefrequency between 1D or 1M. it is not possible to cumulate both of them
+#D-- you can also manage the writefrequency in INCA/src/INCA_XML/file_*.xml files
+WriteFrequency="1D"
+Restart=n
+#D-- Last day of the experience used as restart
+RestartDate=2000-01-01
+#D-- Define restart simulation name
+RestartJobName=JobName
+RestartPath=${ARCHIVE}/IGCM_OUT/LMDZORINCA/NMHC_AER
+
+#========================================================================
+#D-- IOS -
+[IOS]
+WriteFrequency=""
+# If config_Restarts_OverRule == 'n' next 4 params are read
+Restart= n
+##-- Last day of the experience used as restart for this component if Restart=y
+RestartDate=
+# Define restart simulation name for this component
+RestartJobName=
+RestartPath=
+
+#========================================================================
