Index: CMIP6/DAMIP/CM61-LR-hist-stratO3-03.2150/COMP/lim2.card
===================================================================
--- CMIP6/DAMIP/CM61-LR-hist-stratO3-03.2150/COMP/lim2.card	(revision 4131)
+++ CMIP6/DAMIP/CM61-LR-hist-stratO3-03.2150/COMP/lim2.card	(revision 4131)
@@ -0,0 +1,50 @@
+[Compatibility]
+libIGCM=1.0
+
+[UserChoices]
+OutputLevel=1
+
+[InitialStateFiles]
+List=	()
+
+[BoundaryFiles]
+List=	()
+ListNonDel= ()
+
+[SmoothFiles]
+List=	()
+
+[ParametersFiles]
+List=	(${MODIPSL}/modeles/NEMO/CONFIG/SHARED/namelist_lim2_ref, namelist_ice_ref), \
+        (${SUBMIT_DIR}/PARAM/namelist_lim2_${RESOL_OCE}_cfg, namelist_ice_cfg)
+
+[RestartFiles]
+List=	(${config_UserChoices_JobName}_${NEMO_END}_restart_ice.nc, restart_icemod.nc, restart_ice_in.nc)
+
+[OutputText]
+List=   (namelist_ice)
+
+[OutputFiles]
+List=   (${config_UserChoices_JobName}_1m_icemod.nc, ${R_OUT_ICE_O_M}/${PREFIX}_1M_icemod.nc, Post_1M_icemod ), \
+        (${config_UserChoices_JobName}_1d_icemod.nc, ${R_OUT_ICE_O_D}/${PREFIX}_1D_icemod.nc, NONE )
+
+[Post_1M_icemod]
+Patches = ()
+GatherWithInternal = (nav_lon, nav_lat, time_counter, time_counter_bounds)
+TimeSeriesVars2D = (ice_pres, iicetemp, iicethic, iicevelu, iicevelv, isnowthi)
+ChunckJob2D = NONE
+TimeSeriesVars3D = ()
+ChunckJob3D = NONE
+Seasonal=ON
+
+[Post_1D_icemod]
+Patches = ()
+GatherWithInternal = (nav_lon, nav_lat, time_counter, time_counter_bounds)
+TimeSeriesVars2D = (iicethic, iicevelu, iicevelv, ileadfra)
+ChunckJob2D = 200Y
+TimeSeriesVars3D = ()
+ChunckJob3D = NONE
+Seasonal=OFF
+
+
+
Index: CMIP6/DAMIP/CM61-LR-hist-stratO3-03.2150/COMP/lim3.card
===================================================================
--- CMIP6/DAMIP/CM61-LR-hist-stratO3-03.2150/COMP/lim3.card	(revision 4131)
+++ CMIP6/DAMIP/CM61-LR-hist-stratO3-03.2150/COMP/lim3.card	(revision 4131)
@@ -0,0 +1,51 @@
+[Compatibility]
+libIGCM=1.0
+
+[UserChoices]
+OutputLevel=1
+
+[InitialStateFiles]
+List=	()
+
+[BoundaryFiles]
+List=	()
+ListNonDel= (${R_IN}/OCE/IPSLCM6/${opa9_UserChoices_ORCA_version}/maskMFO_lim.nc , .  )
+
+[SmoothFiles]
+List=	()
+
+[ParametersFiles]
+List=	(${MODIPSL}/modeles/NEMOGCM/CONFIG/SHARED/namelist_ice_lim3_ref                  , namelist_ice_ref       ), \
+        (${MODIPSL}/modeles/NEMOGCM/CONFIG/ORCA1_LIM3_PISCES/EXP00/field_def_nemo-lim.xml, field_def_nemo-lim.xml ), \
+        (${SUBMIT_DIR}/PARAM/namelist_lim3_${RESOL_OCE}_cfg_${LMDZ_Physics}              , namelist_ice_cfg       ), \
+        (${SUBMIT_DIR}/PARAM/file_def_nemo-lim3.xml                                      , file_def_nemo-lim.xml  )
+
+
+[RestartFiles]
+List=	(${config_UserChoices_JobName}_${NEMO_END}_restart_ice.nc, restart_icemod.nc, restart_ice_in.nc)
+
+[OutputText]
+List=   (namelist_ice)
+
+[OutputFiles]
+List=   (${config_UserChoices_JobName}_1m_icemod.nc, ${R_OUT_ICE_O_M}/${PREFIX}_1M_icemod.nc, Post_1M_icemod ), \
+        (${config_UserChoices_JobName}_1d_icemod.nc, ${R_OUT_ICE_O_D}/${PREFIX}_1D_icemod.nc, NONE )
+
+[Post_1M_icemod]
+Patches = ()
+GatherWithInternal = (nav_lon, nav_lat, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (snthic, sithic, sivolu, snvolu, siconc, sisali, sitemp, sistem, siages)
+ChunckJob2D = NONE
+TimeSeriesVars3D = ()
+ChunckJob3D = NONE
+Seasonal=ON
+
+[Post_1D_icemod]
+Patches = ()
+GatherWithInternal = (nav_lon, nav_lat, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (snthic,sithic,sivolu,snvolu,siconc)
+ChunckJob2D = OFF
+TimeSeriesVars3D = ()
+ChunckJob3D = NONE
+Seasonal=OFF
+
Index: CMIP6/DAMIP/CM61-LR-hist-stratO3-03.2150/COMP/lmdz.card
===================================================================
--- CMIP6/DAMIP/CM61-LR-hist-stratO3-03.2150/COMP/lmdz.card	(revision 4131)
+++ CMIP6/DAMIP/CM61-LR-hist-stratO3-03.2150/COMP/lmdz.card	(revision 4131)
@@ -0,0 +1,1 @@
+link lmdz.card.2015-2020
Index: CMIP6/DAMIP/CM61-LR-hist-stratO3-03.2150/COMP/lmdz.card.1850-2014
===================================================================
--- CMIP6/DAMIP/CM61-LR-hist-stratO3-03.2150/COMP/lmdz.card.1850-2014	(revision 4131)
+++ CMIP6/DAMIP/CM61-LR-hist-stratO3-03.2150/COMP/lmdz.card.1850-2014	(revision 4131)
@@ -0,0 +1,212 @@
+[Compatibility]
+libIGCM=1.0
+
+[UserChoices]
+# Physics package to use :
+# LMDZ_Physics=AP for standard/old physics(defalut), can be used with LMDZ4_AR5 or LMDZ5/trunk sources
+LMDZ_Physics=NPv6.1
+
+# Set ConfType to choose parameters for aerosols, solar and green house gazes.
+# The parameter file PARAM/config.def_$ConfType will be used.
+# ConfType=preind/actuel/annuel
+ConfType=preind
+
+# Set pmagic in config.def
+pmagic=0.0
+
+# Manage radiative aerosol effect and ozone
+flag_aerosol=6
+ok_ade=y
+ok_aie=y
+aerosol_couple=n
+read_climoz=1
+ok_cdnc=y
+
+# ByPass_hgardfou_teta=y : modify teta_ parameters for following CumulPeriod only
+ByPass_hgardfou_teta=n
+
+# ByPass_hgardfou_mats=y : set parameter purmats=y for following CumulPeriod only
+ByPass_hgardfou_mats=n
+
+# Set OutLevel to choose the level of output for LMDZ
+# OutLevel=low/medium/high
+OutLevel=low
+
+# Set COSP activation and output frequency (monthly, daily, HF) = y/n
+LMDZ_COSP_OK=y
+LMDZ_COSP_monthly=n
+LMDZ_COSP_daily=n
+LMDZ_COSP_hf=n
+
+# Set NMC output frequency (monthly, daily, HF) = y/n
+LMDZ_NMC_monthly=n
+LMDZ_NMC_daily=n
+LMDZ_NMC_hf=n
+
+[InitialStateFiles]
+List=  (${R_IN}/ATM/START/${config_UserChoices_ORCA_version}xLMD${RESOL_ATM_XY}/start_${config_UserChoices_ORCA_version}xLMD${RESOL_ATM_3D}_o2a_v3.nc   , start.nc       ), \
+       (${R_IN}/ATM/START/${config_UserChoices_ORCA_version}xLMD${RESOL_ATM_XY}/startphy_${config_UserChoices_ORCA_version}xLMD${RESOL_ATM_3D}_o2a_v3.nc, startphy.nc    )
+
+[BoundaryFiles]
+List=   (${R_IN}/CMIP6/${config_UserChoices_LongName}/${config_UserChoices_ModelName}/${config_UserChoices_ExperimentName}/${config_UserChoices_Member}/${year}/dr2xml_LMDZ.xml, dr2xml_lmdz.xml),\
+        (${R_IN}/ATM/OZONE/CCCma/hist-stratO3.v20170814/interpol/${RESOL_ATM_XY}/climoz_LMDZ_${year}.nc, climoz_LMDZ.nc)
+#
+# With CMIP6 aerosols version 1
+# With 3D ozone
+ListNonDel= (${R_IN}/ATM/AEROSOLS/CMIP6/v1/${RESOL_ATM_XY}/L${RESOL_ATM_Z}/aerosols1850_from_inca.nc,   aerosols.nat.nc),\
+            (${R_IN}/ATM/SOLAR/CMIP6/v3.1corr/Control/solarforcing_v3.1_piControl_ave_6bands_366days.nc, solarforcing.nc),\
+            (${R_IN}/ATM/STRATAERO/CMIP6/v3/${RESOL_ATM_XY}/L${RESOL_ATM_Z}/taulwstrat.2D.ave.nc, taulwstrat.2D.nc),\
+            (${R_IN}/ATM/STRATAERO/CMIP6/v3/${RESOL_ATM_XY}/L${RESOL_ATM_Z}/tauswstrat.2D.ave.nc, tauswstrat.2D.nc),\
+            (${R_IN}/ATM/SITES/cfsites_grid_CMIP6.nc, cfsites_grid.nc)
+
+[SmoothFiles]
+List=   ()
+
+[ParametersFiles]
+List=   (${SUBMIT_DIR}/PARAM/physiq.def_${LMDZ_Physics}, physiq.def),       \
+        (${SUBMIT_DIR}/PARAM/gcm.def_${RESOL_ATM_XY}_${LMDZ_Physics}, gcm.def), \
+        (${SUBMIT_DIR}/PARAM/vert.def_L${RESOL_ATM_Z},   vert.def),         \
+        (${MODIPSL}/modeles/LMDZ/DefLists/cosp_input_nl.txt, .),            \
+        (${MODIPSL}/modeles/LMDZ/DefLists/cosp_output_nl.txt, .),           \
+        (${SUBMIT_DIR}/PARAM/config.def_${ConfType},  config.def),          \
+        (${SUBMIT_DIR}/PARAM/guide.def, .),                                 \
+        (${SUBMIT_DIR}/PARAM/run.def, .),                                   \
+        (${SUBMIT_DIR}/PARAM/traceur.def, .),                               \
+        (${SUBMIT_DIR}/PARAM/iodef.xml, . ),                                \
+        (${SUBMIT_DIR}/PARAM/ping_LMDZ.xml, ping_lmdz.xml ),                \
+        (${MODIPSL}/modeles/LMDZ/DefLists/context_lmdz.xml, . ),            \
+        (${MODIPSL}/modeles/LMDZ/DefLists/field_def_lmdz.xml, . ),          \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histmth_lmdz.xml, . ),   \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histmthCOSP_lmdz.xml, .),\
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histmthNMC_lmdz.xml, . ),\
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histday_lmdz.xml, . ),   \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histdayCOSP_lmdz.xml, .),\
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histdayNMC_lmdz.xml, . ),\
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histhf_lmdz.xml, . ),    \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histhfCOSP_lmdz.xml, .), \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histhfNMC_lmdz.xml, . ), \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histstn_lmdz.xml, . ),   \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histins_lmdz.xml, . ),   \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histstrataer_lmdz.xml, . ),\
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histLES_lmdz.xml, . )
+
+
+
+[RestartFiles]
+List=   (restart.nc, restart.nc, start.nc), \
+        (restartphy.nc, restartphy.nc,  startphy.nc)
+
+[OutputText]
+List=   (physiq.def, gcm.def, run.def, traceur.def, guide.def, config.def, vert.def, used_run.def, iodef.xml, context_lmdz.xml, field_def_lmdz.xml, file_def_*lmdz.xml, debug_notroot.01, debug.root.01, lmdz.prt, out_lmdz.x.err, out_lmdz.x.out)
+
+[OutputFiles]
+List=   (histmth.nc,       ${R_OUT_ATM_O_M}/${PREFIX}_1M_histmth.nc,       Post_1M_histmth),       \
+        (histmthCOSP.nc,   ${R_OUT_ATM_O_M}/${PREFIX}_1M_histmthCOSP.nc,   NONE),                  \
+        (histmthNMC.nc,    ${R_OUT_ATM_O_M}/${PREFIX}_1M_histmthNMC.nc,    NONE),    \
+        (histday.nc,       ${R_OUT_ATM_O_D}/${PREFIX}_1D_histday.nc,       NONE),                  \
+        (histdayCOSP.nc,   ${R_OUT_ATM_O_D}/${PREFIX}_1D_histdayCOSP.nc,   NONE),                  \
+        (histdayNMC.nc,    ${R_OUT_ATM_O_D}/${PREFIX}_1D_histdayNMC.nc,    NONE),                  \
+        (histhf.nc,        ${R_OUT_ATM_O_H}/${PREFIX}_HF_histhf.nc,        NONE),                  \
+        (histhfCOSP.nc,    ${R_OUT_ATM_O_H}/${PREFIX}_HF_histhfCOSP.nc,    NONE),                  \
+        (histhfNMC.nc,     ${R_OUT_ATM_O_H}/${PREFIX}_HF_histhfNMC.nc,     NONE),                  \
+        (histhf3h.nc,      ${R_OUT_ATM_O_H}/${PREFIX}_3H_histhf3h.nc,      NONE),                  \
+        (histhf3hm.nc,     ${R_OUT_ATM_O_H}/${PREFIX}_3H_histhf3hm.nc,     NONE)
+
+[Post_1M_histmth]
+Patches= ()
+GatherWithInternal = (lon, lat, presnivs, time_counter, time_centered, time_centered_bounds, aire)
+TimeSeriesVars2D = (bils, cldh, cldl, cldm, cldq, cldt, evap, flat, ftime_con, iwp, lwp, LWdnSFC, LWdnSFCclr, LWupSFC, LWupSFCclr, precip, prw, pluc, psol, q2m, rh2m, sens, sicf, slp, snow, soll0, soll, sols0, sols, SWdnSFC, SWupSFC, SWdnTOA, SWupTOA, SWdnSFCclr, SWupSFCclr, SWupTOAclr, t2m, ave_t2m_daily_max, ave_t2m_daily_min, taux, taux_ter, taux_sic, taux_lic, taux_oce, tauy, tauy_ter, tauy_sic, tauy_lic, tauy_oce, lat_ter, lat_sic, lat_lic, lat_oce, nettop, pbase, ptop, topl0, topl, tops0, tops, tsol, tsol_ter, tsol_lic, tsol_oce, tsol_sic , u10m, v10m, pourc_ter, pourc_oce, pourc_sic, pourc_lic, wind10m, od550aer, od550lt1aer, od550_STRAT, sconcoa, sconcbc, sconcso4, R_ecc, R_peri, R_incl, solaire, rsun1, co2_ppm, CH4_ppb, N2O_ppb, CFC11_ppt, CFC12_ppt, colO3_strat, colO3_trop)
+ChunckJob2D = NONE
+TimeSeriesVars3D = (temp, theta, ovap, geop, vitu, vitv, vitw, pres, rneb, rhum, paprs, ec550aer, concoa, concbc, concso4, concss, concdust)
+ChunckJob3D = 100Y
+Seasonal=ON
+
+[Post_1M_histmthCOSP]
+Patches = ()
+GatherWithInternal = (lon, lat, pressure2, height, sza, time_counter, time_centered, time_centered_bounds, aire)
+TimeSeriesVars2D = (cllcalipso, clmcalipso, clhcalipso, cltcalipso, tclisccp, albisccp, ctpisccp)
+ChunckJob2D = OFF
+TimeSeriesVars3D = (clcalipso, clisccp2_c01, clisccp2_c02, clisccp2_c03, clisccp2_c04, clisccp2_c05, clisccp2_c06, clisccp2_c07, parasol_refl)
+ChunckJob3D = OFF
+Seasonal=OFF
+
+[Post_1M_histmthNMC]
+Patches = ()
+GatherWithInternal = (lon, lat, plev, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = ()
+ChunckJob2D = NONE
+TimeSeriesVars3D = (ta, tro3, zg, hus, hur, ua, va, wap)
+ChunckJob3D = NONE
+Seasonal=ON
+
+[Post_1D_histday]
+Patches= ()
+GatherWithInternal = (lon, lat, presnivs, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (bils, cldh, cldl, cldm, cldq, cldt, evap, flat, precip, pluc, plul, prw, psol, q2m, sens, sicf, slp, soll, sols, snow, SWdnSFC, t2m, t2m_max, t2m_min, topl, tops, tsol, u10m, v10m, wind10m, wind10max)
+ChunckJob2D = 50Y
+TimeSeriesVars3D = (lwcon, iwcon, mc, rhum, rneb, temp, theta, ovap, geop, vitu, vitv, vitw, pres, paprs)
+ChunckJob3D = OFF
+Seasonal=OFF
+
+[Post_1D_histdayCOSP]
+Patches = ()
+GatherWithInternal = (lon, lat, pressure2, height, sza, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (cllcalipso, clmcalipso, clhcalipso, cltcalipso, tclisccp, albisccp, ctpisccp)
+ChunckJob2D = OFF
+TimeSeriesVars3D = (clcalipso, clisccp2_c01, clisccp2_c02, clisccp2_c03, clisccp2_c04, clisccp2_c05, clisccp2_c06, clisccp2_c07, parasol_refl)
+ChunckJob3D = OFF
+Seasonal=OFF
+
+[Post_1D_histdayNMC]
+Patches = ()
+GatherWithInternal = (lon, lat, plev, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = ()
+ChunckJob2D = NONE
+TimeSeriesVars3D = (ta, zg, hus, hur, ua, va, wap)
+ChunckJob3D = 10Y
+Seasonal=OFF
+
+[Post_HF_histhf]
+Patches= ()
+GatherWithInternal = (lon, lat, presnivs, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (cldt, psol, q2m, slp, precip, pluc, plul, t2m, tsol, u10m, v10m)
+ChunckJob2D = 50Y
+TimeSeriesVars3D = (temp, theta, ovap, vitu, vitv)
+ChunckJob3D = OFF
+Seasonal=OFF
+
+[Post_HF_histhfCOSP]
+Patches = ()
+GatherWithInternal = (lon, lat, height, sza, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (cllcalipso, clmcalipso, clhcalipso, cltcalipso)
+ChunckJob2D = OFF
+TimeSeriesVars3D = (clcalipso, parasol_refl, cfad_lidarsr532_c01, cfad_lidarsr532_c02, cfad_lidarsr532_c03, cfad_lidarsr532_c04, cfad_lidarsr532_c05, cfad_lidarsr532_c06, cfad_lidarsr532_c07, cfad_lidarsr532_c08, cfad_lidarsr532_c09, cfad_lidarsr532_c10, cfad_lidarsr532_c11, cfad_lidarsr532_c12, cfad_lidarsr532_c13, cfad_lidarsr532_c14, cfad_lidarsr532_c15)
+ChunckJob3D = OFF
+Seasonal=OFF
+
+[Post_HF_histhfNMC]
+Patches = ()
+GatherWithInternal = (lon, lat, plev, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = ()
+ChunckJob2D = NONE
+TimeSeriesVars3D = (ta, zg, hus, hur, ua, va, wap)
+ChunckJob3D = 10Y
+Seasonal=OFF
+
+[Post_3H_histhf3hm]
+Patches= ()
+GatherWithInternal = (lon, lat, presnivs, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (flat, precip, pluc, snow, topl, topl0, SWupTOA, SWupTOAclr, SWdnTOA, SWupSFC, SWupSFCclr, SWdnSFC, SWdnSFCclr, LWupSFC, LWupSFCclr, LWdnSFC, LWdnSFCclr, bils, bils_tke, bils_diss, bils_ec, bils_kinetic, bils_enthalp, bils_latent, sens, cldt, zmax_th)
+ChunckJob2D = OFF
+TimeSeriesVars3D = ()
+ChunckJob3D = OFF
+Seasonal=OFF
+
+[Post_3H_histhf3h]
+Patches= ()
+GatherWithInternal = (lon, lat, presnivs, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (phis, tsol, t2m, q2m, ustar, u10m, v10m, psol)
+ChunckJob2D = OFF
+TimeSeriesVars3D = ()
+ChunckJob3D = OFF
+Seasonal=OFF
Index: CMIP6/DAMIP/CM61-LR-hist-stratO3-03.2150/COMP/lmdz.card.2015-2020
===================================================================
--- CMIP6/DAMIP/CM61-LR-hist-stratO3-03.2150/COMP/lmdz.card.2015-2020	(revision 4131)
+++ CMIP6/DAMIP/CM61-LR-hist-stratO3-03.2150/COMP/lmdz.card.2015-2020	(revision 4131)
@@ -0,0 +1,212 @@
+[Compatibility]
+libIGCM=1.0
+
+[UserChoices]
+# Physics package to use :
+# LMDZ_Physics=AP for standard/old physics(defalut), can be used with LMDZ4_AR5 or LMDZ5/trunk sources
+LMDZ_Physics=NPv6.1
+
+# Set ConfType to choose parameters for aerosols, solar and green house gazes.
+# The parameter file PARAM/config.def_$ConfType will be used.
+# ConfType=preind/actuel/annuel
+ConfType=preind
+
+# Set pmagic in config.def
+pmagic=0.0
+
+# Manage radiative aerosol effect and ozone
+flag_aerosol=6
+ok_ade=y
+ok_aie=y
+aerosol_couple=n
+read_climoz=1
+ok_cdnc=y
+
+# ByPass_hgardfou_teta=y : modify teta_ parameters for following CumulPeriod only
+ByPass_hgardfou_teta=n
+
+# ByPass_hgardfou_mats=y : set parameter purmats=y for following CumulPeriod only
+ByPass_hgardfou_mats=n
+
+# Set OutLevel to choose the level of output for LMDZ
+# OutLevel=low/medium/high
+OutLevel=low
+
+# Set COSP activation and output frequency (monthly, daily, HF) = y/n
+LMDZ_COSP_OK=y
+LMDZ_COSP_monthly=n
+LMDZ_COSP_daily=n
+LMDZ_COSP_hf=n
+
+# Set NMC output frequency (monthly, daily, HF) = y/n
+LMDZ_NMC_monthly=n
+LMDZ_NMC_daily=n
+LMDZ_NMC_hf=n
+
+[InitialStateFiles]
+List=  (${R_IN}/ATM/START/${config_UserChoices_ORCA_version}xLMD${RESOL_ATM_XY}/start_${config_UserChoices_ORCA_version}xLMD${RESOL_ATM_3D}_o2a_v3.nc   , start.nc       ), \
+       (${R_IN}/ATM/START/${config_UserChoices_ORCA_version}xLMD${RESOL_ATM_XY}/startphy_${config_UserChoices_ORCA_version}xLMD${RESOL_ATM_3D}_o2a_v3.nc, startphy.nc    )
+
+[BoundaryFiles]
+List=   (${R_IN}/CMIP6/${config_UserChoices_LongName}/${config_UserChoices_ModelName}/${config_UserChoices_ExperimentName}/${config_UserChoices_Member}/${year}/dr2xml_LMDZ.xml, dr2xml_lmdz.xml),\
+        (${R_IN}/ATM/OZONE/CCCma/hist-stratO3.v20170814/interpol/${RESOL_ATM_XY}/climoz_LMDZ_2014.nc, climoz_LMDZ.nc)
+#
+# With CMIP6 aerosols version 1
+# With 3D ozone
+ListNonDel= (${R_IN}/ATM/AEROSOLS/CMIP6/v1/${RESOL_ATM_XY}/L${RESOL_ATM_Z}/aerosols1850_from_inca.nc,   aerosols.nat.nc),\
+            (${R_IN}/ATM/SOLAR/CMIP6/v3.1corr/Control/solarforcing_v3.1_piControl_ave_6bands_366days.nc, solarforcing.nc),\
+            (${R_IN}/ATM/STRATAERO/CMIP6/v3/${RESOL_ATM_XY}/L${RESOL_ATM_Z}/taulwstrat.2D.ave.nc, taulwstrat.2D.nc),\
+            (${R_IN}/ATM/STRATAERO/CMIP6/v3/${RESOL_ATM_XY}/L${RESOL_ATM_Z}/tauswstrat.2D.ave.nc, tauswstrat.2D.nc),\
+            (${R_IN}/ATM/SITES/cfsites_grid_CMIP6.nc, cfsites_grid.nc)
+
+[SmoothFiles]
+List=   ()
+
+[ParametersFiles]
+List=   (${SUBMIT_DIR}/PARAM/physiq.def_${LMDZ_Physics}, physiq.def),       \
+        (${SUBMIT_DIR}/PARAM/gcm.def_${RESOL_ATM_XY}_${LMDZ_Physics}, gcm.def), \
+        (${SUBMIT_DIR}/PARAM/vert.def_L${RESOL_ATM_Z},   vert.def),         \
+        (${MODIPSL}/modeles/LMDZ/DefLists/cosp_input_nl.txt, .),            \
+        (${MODIPSL}/modeles/LMDZ/DefLists/cosp_output_nl.txt, .),           \
+        (${SUBMIT_DIR}/PARAM/config.def_${ConfType},  config.def),          \
+        (${SUBMIT_DIR}/PARAM/guide.def, .),                                 \
+        (${SUBMIT_DIR}/PARAM/run.def, .),                                   \
+        (${SUBMIT_DIR}/PARAM/traceur.def, .),                               \
+        (${SUBMIT_DIR}/PARAM/iodef.xml, . ),                                \
+        (${SUBMIT_DIR}/PARAM/ping_LMDZ.xml, ping_lmdz.xml ),                \
+        (${MODIPSL}/modeles/LMDZ/DefLists/context_lmdz.xml, . ),            \
+        (${MODIPSL}/modeles/LMDZ/DefLists/field_def_lmdz.xml, . ),          \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histmth_lmdz.xml, . ),   \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histmthCOSP_lmdz.xml, .),\
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histmthNMC_lmdz.xml, . ),\
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histday_lmdz.xml, . ),   \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histdayCOSP_lmdz.xml, .),\
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histdayNMC_lmdz.xml, . ),\
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histhf_lmdz.xml, . ),    \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histhfCOSP_lmdz.xml, .), \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histhfNMC_lmdz.xml, . ), \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histstn_lmdz.xml, . ),   \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histins_lmdz.xml, . ),   \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histstrataer_lmdz.xml, . ),\
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histLES_lmdz.xml, . )
+
+
+
+[RestartFiles]
+List=   (restart.nc, restart.nc, start.nc), \
+        (restartphy.nc, restartphy.nc,  startphy.nc)
+
+[OutputText]
+List=   (physiq.def, gcm.def, run.def, traceur.def, guide.def, config.def, vert.def, used_run.def, iodef.xml, context_lmdz.xml, field_def_lmdz.xml, file_def_*lmdz.xml, debug_notroot.01, debug.root.01, lmdz.prt, out_lmdz.x.err, out_lmdz.x.out)
+
+[OutputFiles]
+List=   (histmth.nc,       ${R_OUT_ATM_O_M}/${PREFIX}_1M_histmth.nc,       Post_1M_histmth),       \
+        (histmthCOSP.nc,   ${R_OUT_ATM_O_M}/${PREFIX}_1M_histmthCOSP.nc,   NONE),                  \
+        (histmthNMC.nc,    ${R_OUT_ATM_O_M}/${PREFIX}_1M_histmthNMC.nc,    NONE),    \
+        (histday.nc,       ${R_OUT_ATM_O_D}/${PREFIX}_1D_histday.nc,       NONE),                  \
+        (histdayCOSP.nc,   ${R_OUT_ATM_O_D}/${PREFIX}_1D_histdayCOSP.nc,   NONE),                  \
+        (histdayNMC.nc,    ${R_OUT_ATM_O_D}/${PREFIX}_1D_histdayNMC.nc,    NONE),                  \
+        (histhf.nc,        ${R_OUT_ATM_O_H}/${PREFIX}_HF_histhf.nc,        NONE),                  \
+        (histhfCOSP.nc,    ${R_OUT_ATM_O_H}/${PREFIX}_HF_histhfCOSP.nc,    NONE),                  \
+        (histhfNMC.nc,     ${R_OUT_ATM_O_H}/${PREFIX}_HF_histhfNMC.nc,     NONE),                  \
+        (histhf3h.nc,      ${R_OUT_ATM_O_H}/${PREFIX}_3H_histhf3h.nc,      NONE),                  \
+        (histhf3hm.nc,     ${R_OUT_ATM_O_H}/${PREFIX}_3H_histhf3hm.nc,     NONE)
+
+[Post_1M_histmth]
+Patches= ()
+GatherWithInternal = (lon, lat, presnivs, time_counter, time_centered, time_centered_bounds, aire)
+TimeSeriesVars2D = (bils, cldh, cldl, cldm, cldq, cldt, evap, flat, ftime_con, iwp, lwp, LWdnSFC, LWdnSFCclr, LWupSFC, LWupSFCclr, precip, prw, pluc, psol, q2m, rh2m, sens, sicf, slp, snow, soll0, soll, sols0, sols, SWdnSFC, SWupSFC, SWdnTOA, SWupTOA, SWdnSFCclr, SWupSFCclr, SWupTOAclr, t2m, ave_t2m_daily_max, ave_t2m_daily_min, taux, taux_ter, taux_sic, taux_lic, taux_oce, tauy, tauy_ter, tauy_sic, tauy_lic, tauy_oce, lat_ter, lat_sic, lat_lic, lat_oce, nettop, pbase, ptop, topl0, topl, tops0, tops, tsol, tsol_ter, tsol_lic, tsol_oce, tsol_sic , u10m, v10m, pourc_ter, pourc_oce, pourc_sic, pourc_lic, wind10m, od550aer, od550lt1aer, od550_STRAT, sconcoa, sconcbc, sconcso4, R_ecc, R_peri, R_incl, solaire, rsun1, co2_ppm, CH4_ppb, N2O_ppb, CFC11_ppt, CFC12_ppt, colO3_strat, colO3_trop)
+ChunckJob2D = NONE
+TimeSeriesVars3D = (temp, theta, ovap, geop, vitu, vitv, vitw, pres, rneb, rhum, paprs, ec550aer, concoa, concbc, concso4, concss, concdust)
+ChunckJob3D = 100Y
+Seasonal=ON
+
+[Post_1M_histmthCOSP]
+Patches = ()
+GatherWithInternal = (lon, lat, pressure2, height, sza, time_counter, time_centered, time_centered_bounds, aire)
+TimeSeriesVars2D = (cllcalipso, clmcalipso, clhcalipso, cltcalipso, tclisccp, albisccp, ctpisccp)
+ChunckJob2D = OFF
+TimeSeriesVars3D = (clcalipso, clisccp2_c01, clisccp2_c02, clisccp2_c03, clisccp2_c04, clisccp2_c05, clisccp2_c06, clisccp2_c07, parasol_refl)
+ChunckJob3D = OFF
+Seasonal=OFF
+
+[Post_1M_histmthNMC]
+Patches = ()
+GatherWithInternal = (lon, lat, plev, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = ()
+ChunckJob2D = NONE
+TimeSeriesVars3D = (ta, tro3, zg, hus, hur, ua, va, wap)
+ChunckJob3D = NONE
+Seasonal=ON
+
+[Post_1D_histday]
+Patches= ()
+GatherWithInternal = (lon, lat, presnivs, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (bils, cldh, cldl, cldm, cldq, cldt, evap, flat, precip, pluc, plul, prw, psol, q2m, sens, sicf, slp, soll, sols, snow, SWdnSFC, t2m, t2m_max, t2m_min, topl, tops, tsol, u10m, v10m, wind10m, wind10max)
+ChunckJob2D = 50Y
+TimeSeriesVars3D = (lwcon, iwcon, mc, rhum, rneb, temp, theta, ovap, geop, vitu, vitv, vitw, pres, paprs)
+ChunckJob3D = OFF
+Seasonal=OFF
+
+[Post_1D_histdayCOSP]
+Patches = ()
+GatherWithInternal = (lon, lat, pressure2, height, sza, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (cllcalipso, clmcalipso, clhcalipso, cltcalipso, tclisccp, albisccp, ctpisccp)
+ChunckJob2D = OFF
+TimeSeriesVars3D = (clcalipso, clisccp2_c01, clisccp2_c02, clisccp2_c03, clisccp2_c04, clisccp2_c05, clisccp2_c06, clisccp2_c07, parasol_refl)
+ChunckJob3D = OFF
+Seasonal=OFF
+
+[Post_1D_histdayNMC]
+Patches = ()
+GatherWithInternal = (lon, lat, plev, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = ()
+ChunckJob2D = NONE
+TimeSeriesVars3D = (ta, zg, hus, hur, ua, va, wap)
+ChunckJob3D = 10Y
+Seasonal=OFF
+
+[Post_HF_histhf]
+Patches= ()
+GatherWithInternal = (lon, lat, presnivs, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (cldt, psol, q2m, slp, precip, pluc, plul, t2m, tsol, u10m, v10m)
+ChunckJob2D = 50Y
+TimeSeriesVars3D = (temp, theta, ovap, vitu, vitv)
+ChunckJob3D = OFF
+Seasonal=OFF
+
+[Post_HF_histhfCOSP]
+Patches = ()
+GatherWithInternal = (lon, lat, height, sza, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (cllcalipso, clmcalipso, clhcalipso, cltcalipso)
+ChunckJob2D = OFF
+TimeSeriesVars3D = (clcalipso, parasol_refl, cfad_lidarsr532_c01, cfad_lidarsr532_c02, cfad_lidarsr532_c03, cfad_lidarsr532_c04, cfad_lidarsr532_c05, cfad_lidarsr532_c06, cfad_lidarsr532_c07, cfad_lidarsr532_c08, cfad_lidarsr532_c09, cfad_lidarsr532_c10, cfad_lidarsr532_c11, cfad_lidarsr532_c12, cfad_lidarsr532_c13, cfad_lidarsr532_c14, cfad_lidarsr532_c15)
+ChunckJob3D = OFF
+Seasonal=OFF
+
+[Post_HF_histhfNMC]
+Patches = ()
+GatherWithInternal = (lon, lat, plev, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = ()
+ChunckJob2D = NONE
+TimeSeriesVars3D = (ta, zg, hus, hur, ua, va, wap)
+ChunckJob3D = 10Y
+Seasonal=OFF
+
+[Post_3H_histhf3hm]
+Patches= ()
+GatherWithInternal = (lon, lat, presnivs, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (flat, precip, pluc, snow, topl, topl0, SWupTOA, SWupTOAclr, SWdnTOA, SWupSFC, SWupSFCclr, SWdnSFC, SWdnSFCclr, LWupSFC, LWupSFCclr, LWdnSFC, LWdnSFCclr, bils, bils_tke, bils_diss, bils_ec, bils_kinetic, bils_enthalp, bils_latent, sens, cldt, zmax_th)
+ChunckJob2D = OFF
+TimeSeriesVars3D = ()
+ChunckJob3D = OFF
+Seasonal=OFF
+
+[Post_3H_histhf3h]
+Patches= ()
+GatherWithInternal = (lon, lat, presnivs, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (phis, tsol, t2m, q2m, ustar, u10m, v10m, psol)
+ChunckJob2D = OFF
+TimeSeriesVars3D = ()
+ChunckJob3D = OFF
+Seasonal=OFF
Index: CMIP6/DAMIP/CM61-LR-hist-stratO3-03.2150/COMP/oasis.card
===================================================================
--- CMIP6/DAMIP/CM61-LR-hist-stratO3-03.2150/COMP/oasis.card	(revision 4131)
+++ CMIP6/DAMIP/CM61-LR-hist-stratO3-03.2150/COMP/oasis.card	(revision 4131)
@@ -0,0 +1,154 @@
+[Compatibility] 
+libIGCM=1.0 
+ 	 
+[UserChoices]
+OutputMode=n
+FreqCoupling=5400
+FreqCouplingRoffCalv=86400
+Lucia=n
+
+# ByPass_addnoise_sst=y : use addnoise on sst in CPL restart for following CumulPeriod only
+ByPass_addnoise_sst= n
+ByPass_PerturbExe=AddNoise
+ByPass_FileOut=sstoc
+ByPass_PerturbVar=O_SSTSST
+ByPass_PerturbAmp=0.01
+
+[InitialStateFiles]
+List=   (${R_IN}/CPL/IPSLCM6/${config_UserChoices_ORCA_version}x${RESOL_ATM}/flxat_v3.nc, flxat.nc), \
+        (${R_IN}/CPL/IPSLCM6/${config_UserChoices_ORCA_version}x${RESOL_ATM}/sstoc_v3.nc, sstoc.nc), \
+        (${R_IN}/CPL/IPSLCM6/${config_UserChoices_ORCA_version}x${RESOL_ATM}/icbrg_v3.nc, icbrg.nc), \
+        (${R_IN}/CPL/IPSLCM6/${config_UserChoices_ORCA_version}x${RESOL_ATM}/icshf_v3.nc, icshf.nc)
+
+[BoundaryFiles]
+List=	()
+ListNonDel= (${R_IN}/CPL/IPSLCM6/${config_UserChoices_ORCA_version}x${RESOL_ATM}/grids_v3.nc, grids.nc),\
+	    (${R_IN}/CPL/IPSLCM6/${config_UserChoices_ORCA_version}x${RESOL_ATM}/masks_v3.nc, masks.nc),\
+	    (${R_IN}/CPL/IPSLCM6/${config_UserChoices_ORCA_version}x${RESOL_ATM}/areas_v3.nc, areas.nc),\
+            (${R_IN}/CPL/IPSLCM6/${config_UserChoices_ORCA_version}x${RESOL_ATM}/rmp_torc_to_tlmd_MOSAIC_v3.nc, rmp_torc_to_tlmd_MOSAIC.nc),\
+            (${R_IN}/CPL/IPSLCM6/${config_UserChoices_ORCA_version}x${RESOL_ATM}/rmp_tlmd_to_torc_MOSAIC_v3.nc, rmp_tlmd_to_torc_MOSAIC.nc),\
+	    (${R_IN}/CPL/IPSLCM6/${config_UserChoices_ORCA_version}x${RESOL_ATM}/rmp_tlmd_to_uorc_BILINEAR_Corrected.nc, .),\
+	    (${R_IN}/CPL/IPSLCM6/${config_UserChoices_ORCA_version}x${RESOL_ATM}/rmp_tlmd_to_torc_BILINEAR_Corrected.nc, .),\
+            (${R_IN}/CPL/IPSLCM6/${config_UserChoices_ORCA_version}x${RESOL_ATM}/rmp_tlmd_to_torc_MOSAIC_calving_nosouth_v3.nc, rmp_tlmd_to_torc_MOSAIC_calving_nosouth.nc),\
+            (${R_IN}/CPL/IPSLCM6/${config_UserChoices_ORCA_version}x${RESOL_ATM}/rmp_tlmd_to_torc_MOSAIC_calving_iceberg_v3.nc, rmp_tlmd_to_torc_MOSAIC_calving_iceberg.nc),\
+            (${R_IN}/CPL/IPSLCM6/${config_UserChoices_ORCA_version}x${RESOL_ATM}/rmp_tlmd_to_torc_MOSAIC_calving_iceshelf_v3.nc, rmp_tlmd_to_torc_MOSAIC_calving_iceshelf.nc),\
+            (${R_IN}/CPL/IPSLCM6/${config_UserChoices_ORCA_version}x${RESOL_ATM}/rmp_tlmd_to_torc_MOSAIC_rivflu_v4.nc, rmp_tlmd_to_torc_MOSAIC_rivflu.nc)
+
+[SmoothFiles]
+List=	()
+
+[ParametersFiles]
+List=	(${SUBMIT_DIR}/PARAM/namcouple_${RESOL_CPL}, namcouple)
+
+[RestartFiles]
+List=   (flxat.nc, flxat.nc, flxat.nc),\
+    (sstoc.nc, sstoc.nc, sstoc.nc),\
+    (icbrg.nc, icbrg.nc, icbrg.nc),\
+    (icshf.nc, icshf.nc, icshf.nc)
+
+[OutputText]
+List=   (namcouple, nout.000000, lucia, oasis_balance.eps)
+
+[OutputFiles]
+List=   (SISUTESW_LMDZ_01.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_SISUTESW.nc,    Post_ncks_cdo),\
+    (SIICECOV_LMDZ_02.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_SIICECOV.nc,    Post_ncks_cdo),\
+    (SIICTEMW_LMDZ_03.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_SIICTEMW.nc,    Post_ncks_cdo),\
+    (SIICEALW_LMDZ_04.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_SIICEALW.nc,    Post_ncks_cdo),\
+    (CURRENTX_LMDZ_05.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_CURRENTX.nc,    Post_ncks_cdo),\
+    (CURRENTY_LMDZ_06.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_CURRENTY.nc,    Post_ncks_cdo),\
+    (CURRENTZ_LMDZ_07.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_CURRENTZ.nc,    Post_ncks_cdo),\
+    (COTAUXXU_LMDZ_08.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_COTAUXXU.nc,    Post_ncks_cdo),\
+    (COTAUYYU_LMDZ_09.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_COTAUYYU.nc,    Post_ncks_cdo),\
+    (COTAUZZU_LMDZ_10.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_COTAUZZU.nc,    Post_ncks_cdo),\
+    (COTAUXXV_LMDZ_11.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_COTAUXXV.nc,    Post_ncks_cdo),\
+    (COTAUYYV_LMDZ_12.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_COTAUYYV.nc,    Post_ncks_cdo),\
+    (COTAUZZV_LMDZ_13.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_COTAUZZV.nc,    Post_ncks_cdo),\
+    (COWINDSP_LMDZ_14.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_COWINDSP.nc,    Post_ncks_cdo),\
+    (COTOTRAI_LMDZ_15.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_COTOTRAI.nc,    Post_ncks_cdo),\
+    (COTOTSNO_LMDZ_16.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_COTOTSNO.nc,    Post_ncks_cdo),\
+    (COTOTEVA_LMDZ_17.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_COTOTEVA.nc,    Post_ncks_cdo),\
+    (COICEVAP_LMDZ_18.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_COICEVAP.nc,    Post_ncks_cdo),\
+    (COQSRMIX_LMDZ_19.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_COQSRMIX.nc,    Post_ncks_cdo),\
+    (COQNSMIX_LMDZ_20.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_COQNSMIX.nc,    Post_ncks_cdo),\
+    (COSHFICE_LMDZ_21.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_COSHFICE.nc,    Post_ncks_cdo),\
+    (CONSFICE_LMDZ_22.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_CONSFICE.nc,    Post_ncks_cdo),\
+    (CODFLXDT_LMDZ_23.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_CODFLXDT.nc,    Post_ncks_cdo),\
+    (COCALVIN_LMDZ_24.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_COCALVIN.nc,    Post_ncks_cdo),\
+    (COLIQRUN_LMDZ_27.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_COLIQRUN.nc,    Post_ncks_cdo),\
+    (O_SSTSST_oceanx_01.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_O_SSTSST.nc,    Post_ncks_cdo),\
+    (OIceFrc_oceanx_02.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_OIceFrac.nc,    Post_ncks_cdo),\
+    (O_TepIce_oceanx_03.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_O_TepIce.nc,    Post_ncks_cdo),\
+    (O_AlbIce_oceanx_04.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_O_AlbIce.nc,    Post_ncks_cdo),\
+    (O_OCurx1_oceanx_05.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_O_OCurx1.nc,    Post_ncks_cdo),\
+    (O_OCury1_oceanx_06.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_O_OCury1.nc,    Post_ncks_cdo),\
+    (O_OCurz1_oceanx_07.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_O_OCurz1.nc,    Post_ncks_cdo),\
+    (O_OTaux1_oceanx_08.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_O_OTaux1.nc,    Post_ncks_cdo),\
+    (O_OTauy1_oceanx_09.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_O_OTauy1.nc,    Post_ncks_cdo),\
+    (O_OTauz1_oceanx_10.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_O_OTauz1.nc,    Post_ncks_cdo),\
+    (O_OTaux2_oceanx_11.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_O_OTaux2.nc,    Post_ncks_cdo),\
+    (O_OTauy2_oceanx_12.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_O_OTauy2.nc,    Post_ncks_cdo),\
+    (O_OTauz2_oceanx_13.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_O_OTauz2.nc,    Post_ncks_cdo),\
+    (O_Wind10_oceanx_14.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_O_Wind10.nc,    Post_ncks_cdo),\
+    (OTotRain_oceanx_15.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_OTotRain.nc,    Post_ncks_cdo),\
+    (OTotSnow_oceanx_16.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_OTotSnow.nc,    Post_ncks_cdo),\
+    (OTotEvap_oceanx_17.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_OTotEvap.nc,    Post_ncks_cdo),\
+    (OIceEvap_oceanx_18.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_OIceEvap.nc,    Post_ncks_cdo),\
+    (O_QsrMix_oceanx_19.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_O_QsrMix.nc,    Post_ncks_cdo),\
+    (O_QnsMix_oceanx_20.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_O_QnsMix.nc,    Post_ncks_cdo),\
+    (O_QsrIce_oceanx_21.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_O_QsrIce.nc,    Post_ncks_cdo),\
+    (O_QnsIce_oceanx_22.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_O_QnsIce.nc,    Post_ncks_cdo),\
+    (O_dQnsdT_oceanx_23.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_O_dQnsdT.nc,    Post_ncks_cdo),\
+    (OCalving_oceanx_24.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_OCalving.nc,    Post_ncks_cdo),\
+    (OIceberg_oceanx_25.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_OIceberg.nc,    Post_ncks_cdo),\
+    (OIcshelf_oceanx_26.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_OIcshelf.nc,    Post_ncks_cdo),\
+    (O_Runoff_oceanx_27.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_O_Runoff.nc,    Post_ncks_cdo),\
+    (TEMPO_1D_cpl_atm.nc,    ${R_OUT_CPL_O_D}/${PREFIX}_1D_cpl_atm.nc , Post_1D_cpl_atm), \
+    (TEMPO_1D_cpl_oce.nc,    ${R_OUT_CPL_O_D}/${PREFIX}_1D_cpl_oce.nc , Post_1D_cpl_oce), \
+    (TEMPO_1M_cpl_atm.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_1M_cpl_atm.nc , Post_1M_cpl_atm), \
+    (TEMPO_1M_cpl_oce.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_1M_cpl_oce.nc , Post_1M_cpl_oce)
+
+[Post_ncks_cdo]
+Patches = (Patch_20140801_ncks_cdo)
+GatherWithInternal = ()
+TimeSeriesVars2D = ()
+ChunckJob2D = NONE
+TimeSeriesVars3D = ()
+ChunckJob3D = NONE
+Seasonal=OFF
+
+[Post_1D_cpl_atm]
+Patches = (Patch_20091119_put_out)
+GatherWithInternal = ()
+TimeSeriesVars2D = ()
+ChunckJob2D = NONE
+TimeSeriesVars3D = ()
+ChunckJob3D = NONE
+Seasonal=OFF
+
+[Post_1D_cpl_oce]
+Patches = (Patch_20091119_put_out)
+GatherWithInternal = ()
+TimeSeriesVars2D = ()
+ChunckJob2D = NONE
+TimeSeriesVars3D = ()
+ChunckJob3D = NONE
+Seasonal=OFF
+
+[Post_1M_cpl_atm]
+Patches = (Patch_20091119_put_out)
+GatherWithInternal = (lon, lat, time)
+TimeSeriesVars2D = (COTAUXXU, COTAUYYU, COTAUZZU, COTAUXXV, COTAUYYV, COTAUZZV, COWINDSP, COTOTRAI, COTOTSNO, COTOTEVA, COICEVAP, COQSRMIX, COQNSMIX, COSHFICE, CONSFICE, CODFLXDT, COCALVIN, COLIQRUN, SISUTESW, SIICECOV, SIICTEMW, SIICEALW, CURRENTX, CURRENTY, CURRENTZ)
+ChunckJob2D = OFF
+TimeSeriesVars3D = ()
+ChunckJob3D = NONE
+Seasonal=OFF
+
+[Post_1M_cpl_oce]
+Patches = (Patch_20091119_put_out)
+GatherWithInternal = (lon, lat, time)
+TimeSeriesVars2D = (O_OTaux1, O_OTauy1, O_OTauz1, O_OTaux2, O_OTauy2, O_OTauz2, O_Wind10, OTotRain, OTotSnow, OTotEvap, OIceEvap, O_QsrMix, O_QnsMix, O_QsrIce, O_QnsIce, O_dQnsdT, OCalving, OIceberg, OIcshelf, O_Runoff, O_SSTSST, OIceFrc, O_TepIce, O_AlbIce, O_OCurx1, O_OCury1, O_OCurz1)
+ChunckJob2D = OFF
+TimeSeriesVars3D = ()
+ChunckJob3D = NONE
+Seasonal=OFF
+
Index: CMIP6/DAMIP/CM61-LR-hist-stratO3-03.2150/COMP/opa9.card
===================================================================
--- CMIP6/DAMIP/CM61-LR-hist-stratO3-03.2150/COMP/opa9.card	(revision 4131)
+++ CMIP6/DAMIP/CM61-LR-hist-stratO3-03.2150/COMP/opa9.card	(revision 4131)
@@ -0,0 +1,258 @@
+[Compatibility]
+libIGCM=1.0
+
+[UserChoices]
+ORCA_version=${config_UserChoices_ORCA_version:-eORCA1.1}
+mesh_mask= n
+Reproducibility_after_restart= y
+Restart_TS_only= n
+OutputLevel=1
+
+[InitialStateFiles]
+List=	()
+
+[BoundaryFiles]
+List=	(${R_IN}/CMIP6/${config_UserChoices_LongName}/${config_UserChoices_ModelName}/${config_UserChoices_ExperimentName}/${config_UserChoices_Member}/${year}/dr2xml_nemo.xml, dr2xml_opa9.xml)
+ListNonDel= (${R_IN}/OCE/IPSLCM6/${opa9_UserChoices_ORCA_version}/coordinates.nc                     , .  ), \
+            (${R_IN}/OCE/IPSLCM6/${opa9_UserChoices_ORCA_version}/coordinates_xios.nc                , .  ), \
+            (${R_IN}/OCE/IPSLCM6/${opa9_UserChoices_ORCA_version}/${opa9_UserChoices_ORCA_version}_bathy_meter.nc    , bathy_meter.nc ), \
+            (${R_IN}/OCE/IPSLCM6/${opa9_UserChoices_ORCA_version}/runoffs_${opa9_UserChoices_ORCA_version}_depths.nc    , runoffs_eORCA1.0_depths.nc   ), \
+            (${R_IN}/OCE/IPSLCM6/${opa9_UserChoices_ORCA_version}/ahmcoef.nc                         , .  ), \
+            (${R_IN}/OCE/IPSLCM6/${opa9_UserChoices_ORCA_version}/mask_itf.nc                        , .  ), \
+            (${R_IN}/OCE/IPSLCM6/${opa9_UserChoices_ORCA_version}/maskMFO_opa.nc                     , .  ), \
+            (${R_IN}/OCE/IPSLCM6/${opa9_UserChoices_ORCA_version}/K1rowdrg.nc                        , K1rowdrg.nc     ), \
+            (${R_IN}/OCE/IPSLCM6/${opa9_UserChoices_ORCA_version}/M2rowdrg.nc                        , M2rowdrg.nc     ), \
+            (${R_IN}/OCE/IPSLCM6/${opa9_UserChoices_ORCA_version}/subbasins_v10.nc                   , subbasins.nc    ), \
+            (${R_IN}/OCE/IPSLCM6/${opa9_UserChoices_ORCA_version}/Goutorbe_ghflux.nc                                   ,  . ), \
+            (${R_IN}/OCE/IPSLCM6/${opa9_UserChoices_ORCA_version}/conservative_temperature_WOA13_decav_Reg1L75_clim.nc ,  . ), \
+            (${R_IN}/OCE/IPSLCM6/${opa9_UserChoices_ORCA_version}/absolute_salinity_WOA13_decav_Reg1L75_clim.nc        ,  . ), \
+            (${R_IN}/OCE/IPSLCM6/${opa9_UserChoices_ORCA_version}/weights_3D_WOA13d1_2_eorca1_bilinear.nc              ,  . ), \
+            (${R_IN}/OCE/IPSLCM6/${opa9_UserChoices_ORCA_version}/weights_Goutorbe1_2_eorca1_bilinear.nc               ,  . ), \
+            (${R_IN}/OCE/IPSLCM6/${opa9_UserChoices_ORCA_version}/merged_ESACCI_BIOMER4V1R1_CHL_REG05.nc               ,  . ), \
+            (${R_IN}/OCE/IPSLCM6/${opa9_UserChoices_ORCA_version}/weights_reg05_2_eorca1_bilinear.nc                   ,  . ), \
+            (${R_IN}/OCE/IPSLCM6/${opa9_UserChoices_ORCA_version}/mixing_power_bot.nc                                  ,  . ), \
+            (${R_IN}/OCE/IPSLCM6/${opa9_UserChoices_ORCA_version}/mixing_power_pyc.nc                                  ,  . ), \
+            (${R_IN}/OCE/IPSLCM6/${opa9_UserChoices_ORCA_version}/mixing_power_cri.nc                                  ,  . ), \
+            (${R_IN}/OCE/IPSLCM6/${opa9_UserChoices_ORCA_version}/decay_scale_bot.nc                                   ,  . ), \
+            (${R_IN}/OCE/IPSLCM6/${opa9_UserChoices_ORCA_version}/decay_scale_cri.nc                                   ,  . ), \
+            (${R_IN}/OCE/IPSLCM6/${opa9_UserChoices_ORCA_version}/vosaline_360x180-ORCA1_WOA13_climatemonth.nc         , sali_ref_clim_monthly.nc ), \
+            (${R_IN}/OCE/IPSLCM6/${opa9_UserChoices_ORCA_version}/runoff-icb_DaiTrenberth_Depoorter_eORCA1_JD.nc       ,.)
+
+
+[SmoothFiles]
+List=	()
+
+[ParametersFiles]
+List=   (${MODIPSL}/modeles/NEMOGCM/CONFIG/SHARED/namelist_ref                            , namelist_ref        ), \
+        (${SUBMIT_DIR}/PARAM/ping_nemo.xml, . )                                                                  , \
+        (${MODIPSL}/modeles/NEMOGCM/CONFIG/ORCA1_LIM3_PISCES/EXP00/context_nemo.xml       , context_nemo.xml    ), \
+        (${MODIPSL}/modeles/NEMOGCM/CONFIG/ORCA1_LIM3_PISCES/EXP00/domain_def_nemo.xml    , domain_def_nemo.xml ), \
+        (${MODIPSL}/modeles/NEMOGCM/CONFIG/ORCA1_LIM3_PISCES/EXP00/axis_def_nemo.xml      , axis_def_nemo.xml   ), \
+        (${MODIPSL}/modeles/NEMOGCM/CONFIG/ORCA1_LIM3_PISCES/EXP00/grids_def_nemo.xml     , grids_def_nemo.xml  ), \
+        (${MODIPSL}/modeles/NEMOGCM/CONFIG/ORCA1_LIM3_PISCES/EXP00/field_def_nemo-opa.xml , field_def_nemo-opa.xml  ), \
+        (${SUBMIT_DIR}/PARAM/namelist_${RESOL_OCE}_cfg                                    , namelist_cfg        ), \
+        (${SUBMIT_DIR}/PARAM/file_def_nemo-opa.xml                                        , file_def_nemo-opa.xml   )
+
+   
+
+[RestartFiles]
+List=	(${config_UserChoices_JobName}_${NEMO_END}_restart.nc,  restart.nc, restartopa.nc)
+
+[OutputText]
+List=   (ocean.output, solver.stat, namelist, output.namelist.*, context_nemo.xml, axis_def_nemo.xml, grids_def_nemo.xml, field_def_nemo.xml, domain_def_nemo.xml, out_opa.xx.out, out_opa.xx.err, debug_notroot.02, debug.root.02)
+
+
+[OutputFiles]
+List=   (${config_UserChoices_JobName}_1y_scalar.nc    , ${R_OUT_OCE_O_Y}/${PREFIX}_1Y_scalar.nc     , NONE          ),\
+        (${config_UserChoices_JobName}_1y_grid_T.nc    , ${R_OUT_OCE_O_Y}/${PREFIX}_1Y_grid_T.nc     , NONE          ),\
+        (${config_UserChoices_JobName}_1y_grid_U.nc    , ${R_OUT_OCE_O_Y}/${PREFIX}_1Y_grid_U.nc     , NONE          ),\
+        (${config_UserChoices_JobName}_1y_grid_V.nc    , ${R_OUT_OCE_O_Y}/${PREFIX}_1Y_grid_V.nc     , NONE          ),\
+        (${config_UserChoices_JobName}_1y_grid_W.nc    , ${R_OUT_OCE_O_Y}/${PREFIX}_1Y_grid_W.nc     , NONE          ),\
+        (${config_UserChoices_JobName}_1y_diaptr_T.nc  , ${R_OUT_OCE_O_Y}/${PREFIX}_1Y_diaptr_T.nc   , NONE          ),\
+        (${config_UserChoices_JobName}_1y_diaptr_W.nc  , ${R_OUT_OCE_O_Y}/${PREFIX}_1Y_diaptr_W.nc   , NONE          ),\
+        (${config_UserChoices_JobName}_1y_trdtra.nc    , ${R_OUT_OCE_O_Y}/${PREFIX}_1Y_trdtra.nc     , NONE          ),\
+        (${config_UserChoices_JobName}_1m_scalar.nc    , ${R_OUT_OCE_O_M}/${PREFIX}_1M_scalar.nc     , Post_1M_scalar),\
+        (${config_UserChoices_JobName}_1m_grid_T.nc    , ${R_OUT_OCE_O_M}/${PREFIX}_1M_grid_T.nc     , Post_1M_grid_T),\
+        (${config_UserChoices_JobName}_1m_grid_U.nc    , ${R_OUT_OCE_O_M}/${PREFIX}_1M_grid_U.nc     , Post_1M_grid_U),\
+        (${config_UserChoices_JobName}_1m_grid_V.nc    , ${R_OUT_OCE_O_M}/${PREFIX}_1M_grid_V.nc     , Post_1M_grid_V),\
+        (${config_UserChoices_JobName}_1m_grid_W.nc    , ${R_OUT_OCE_O_M}/${PREFIX}_1M_grid_W.nc     , Post_1M_grid_W),\
+        (${config_UserChoices_JobName}_1m_diaptr_W.nc  , ${R_OUT_OCE_O_M}/${PREFIX}_1M_diaptr_W.nc   , Post_1M_diaptr_W),\
+        (${config_UserChoices_JobName}_1m_diaptr_T.nc  , ${R_OUT_OCE_O_M}/${PREFIX}_1M_diaptr_T.nc   , NONE          ),\
+        (${config_UserChoices_JobName}_1m_trdtra.nc    , ${R_OUT_OCE_O_M}/${PREFIX}_1M_trdtra.nc     , NONE          ),\
+        (${config_UserChoices_JobName}_5d_grid_T.nc    , ${R_OUT_OCE_O_D}/${PREFIX}_5D_grid_T.nc     , NONE          ),\
+        (${config_UserChoices_JobName}_5d_grid_U.nc    , ${R_OUT_OCE_O_D}/${PREFIX}_5D_grid_U.nc     , NONE          ),\
+        (${config_UserChoices_JobName}_5d_grid_V.nc    , ${R_OUT_OCE_O_D}/${PREFIX}_5D_grid_V.nc     , NONE          ),\
+        (${config_UserChoices_JobName}_5d_grid_W.nc    , ${R_OUT_OCE_O_D}/${PREFIX}_5D_grid_W.nc     , NONE          ),\
+        (${config_UserChoices_JobName}_5d_trdtra.nc    , ${R_OUT_OCE_O_D}/${PREFIX}_5D_trdtra.nc     , NONE          ),\
+        (${config_UserChoices_JobName}_1d_grid_T.nc    , ${R_OUT_OCE_O_D}/${PREFIX}_1D_grid_T.nc     , NONE          ),\
+        (${config_UserChoices_JobName}_1d_grid_U.nc    , ${R_OUT_OCE_O_D}/${PREFIX}_1D_grid_U.nc     , NONE          ),\
+        (${config_UserChoices_JobName}_1d_grid_W.nc    , ${R_OUT_OCE_O_D}/${PREFIX}_1D_grid_W.nc     , NONE          ),\
+        (${config_UserChoices_JobName}_1d_SBC.nc       , ${R_OUT_OCE_O_D}/${PREFIX}_1D_SBC.nc        , NONE          ),\
+        (${config_UserChoices_JobName}_1d_diaptr_T.nc  , ${R_OUT_OCE_O_D}/${PREFIX}_1D_diaptr_T.nc   , NONE          ),\
+        (${config_UserChoices_JobName}_1d_diaptr_W.nc  , ${R_OUT_OCE_O_D}/${PREFIX}_1D_diaptr_W.nc   , NONE          ),\
+        (${config_UserChoices_JobName}_1d_scalar.nc    , ${R_OUT_OCE_O_D}/${PREFIX}_1D_scalar.nc     , NONE          ),\
+        (mesh_mask.nc     , ${R_OUT_OCE_O}/${config_UserChoices_JobName}_mesh_mask.nc                       , NONE),\
+        (runoffs.nc       , ${R_OUT_OCE_O}/${config_UserChoices_JobName}_runoffs.nc                         , NONE),\
+	(damping.coeff.nc , ${R_OUT_OCE_O_D}/${PREFIX}_damping.coeff.nc                                     , NONE),\
+        (output.abort.nc  , ${R_OUT_OCE_D}/${PREFIX}_output.abort.nc                                        , NONE),\
+        (output.init.nc   , ${R_OUT_OCE_O_I}/${config_UserChoices_JobName}_${PeriodDateBegin}_output.init.nc, NONE)
+
+
+# Monthly analysis
+
+[Post_1M_scalar]
+Patches = ()
+GatherWithInternal = (time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (scmastot, scvoltot, scsshtot, scsshste, scsshtst, sctemtot, scsaltot, ibgheat_tot, sbgheat_tot)
+ChunckJob2D = NONE
+TimeSeriesVars3D = ()
+ChunckJob3D = NONE
+Seasonal=OFF
+
+[Post_1M_grid_T]
+Patches = ()
+GatherWithInternal = (nav_lon, nav_lat, olevel, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (zos, tos, sos,  mldr10_1, nshfls, rsntds, friver, hc300, wfo)
+ChunckJob2D = NONE
+TimeSeriesVars3D = (thetao, so)
+ChunckJob3D = 100Y
+Seasonal=ON
+
+[Post_1M_grid_U]
+Patches = ()
+GatherWithInternal = (nav_lon, nav_lat, olevel, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = ()
+ChunckJob2D = NONE
+TimeSeriesVars3D = ()
+ChunckJob3D = 100Y
+Seasonal=ON
+
+[Post_1M_grid_V]
+Patches = ()
+GatherWithInternal = (nav_lon, nav_lat, olevel, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = ()
+ChunckJob2D = NONE
+TimeSeriesVars3D = ()
+ChunckJob3D = 100Y
+Seasonal=ON
+
+[Post_1M_grid_W]
+Patches = ()
+GatherWithInternal = (nav_lon, nav_lat, olevel, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = ( )
+ChunckJob2D = NONE
+TimeSeriesVars3D = ( )
+ChunckJob3D = 100Y
+Seasonal=ON
+
+[Post_1M_diaptr_T]
+Patches = ()
+GatherWithInternal = (nav_lat, olevel, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (zotemglo, zotematl, zotempac, zotemind, zotemipc, zosalglo, zosalatl, zosalpac, zosalind, zosalipc, zosrfglo, zosrfatl, zosrfpac, zosrfind, zosrfipc, sophtadv, sophtldf, sopstadv, sopstldf)
+ChunckJob2D = NONE
+TimeSeriesVars3D = ()
+ChunckJob3D = NONE
+Seasonal=ON
+
+[Post_1M_diaptr_W]
+Patches = ()
+GatherWithInternal = (nav_lat, olevel, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (zomsfglo, zomsfatl, zomsfpac, zomsfind, zomsfipc)
+ChunckJob2D = NONE
+TimeSeriesVars3D = ()
+ChunckJob3D = NONE
+Seasonal=ON
+
+[Post_1M_trdtra]
+Patches = ()
+GatherWithInternal = (nav_lon, nav_lat, olevel, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = NONE
+ChunckJob2D = NONE
+TimeSeriesVars3D = (ttrdtr_zdfp, ttrdtr_eivad, ttrdtr_iso, ttrdtr_totad, ttrdtr_tot, strdtr_zdfp, strdtr_eivad, strdtr_iso, strdtr_totad, strdtr_tot)
+ChunckJob3D = 100Y
+Seasonal=ON
+
+# Daily analysis
+
+[Post_1D_grid_T]
+Patches = ()
+GatherWithInternal = (nav_lon, nav_lat, olevel, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (tos, tosstd, sos, zos, zosstd, sstdcy, mldr10_1, mldr10_1dcy, mldkz5)
+ChunckJob2D = OFF
+TimeSeriesVars3D = ()
+ChunckJob3D = OFF
+Seasonal=OFF
+
+[Post_1D_grid_U]
+Patches = ()
+GatherWithInternal = (nav_lon, nav_lat, olevel, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = ()
+ChunckJob2D = 100Y
+TimeSeriesVars3D = ()
+ChunckJob3D = OFF
+Seasonal=OFF
+
+[Post_1D_grid_V]
+Patches = ()
+GatherWithInternal = (nav_lon, nav_lat, olevel, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = ()
+ChunckJob2D = 200Y
+TimeSeriesVars3D = ()
+ChunckJob3D = OFF
+Seasonal=OFF
+
+## Yearly analysis
+
+[Post_1Y_scalar]
+Patches = ()
+GatherWithInternal = (time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (scmastot, scvoltot, scsshtot, scsshste, scsshtst, sctemtot, scsaltot, ibgheat_tot, sbgheat_tot)
+ChunckJob2D = NONE
+TimeSeriesVars3D = ()
+ChunckJob3D = NONE
+Seasonal=OFF
+
+[Post_1Y_grid_T]
+Patches = ()
+GatherWithInternal = (nav_lon, nav_lat, olevel, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = ( )
+ChunckJob2D = NONE
+TimeSeriesVars3D = (thetao, so)
+ChunckJob3D = 50Y
+Seasonal=OFF
+
+[Post_1Y_grid_U]
+Patches = ()
+GatherWithInternal = (nav_lon, nav_lat, olevel, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (hfx, hfxba, hfxdiff, sozotaux)
+ChunckJob2D = NONE
+TimeSeriesVars3D = (umo, vozocrtx,vozoeivu)
+ChunckJob3D = 50Y
+Seasonal=OFF
+
+[Post_1Y_grid_V]
+Patches = ()
+GatherWithInternal = (nav_lon, nav_lat, olevel, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = ( )
+ChunckJob2D = NONE
+TimeSeriesVars3D = ( )
+ChunckJob3D = 50Y
+Seasonal=OFF
+
+[Post_1Y_diaptr_T]
+Patches = ()
+GatherWithInternal = (nav_lat, olevel, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (zotemglo, zotematl, zotempac, zotemind, zotemipc, zosalglo, zosalatl, zosalpac, zosalind, zosalipc, zosrfglo, zosrfatl, zosrfpac, zosrfind, zosrfipc, sophtadv, sophtldf, sopstadv, sopstldf)
+ChunckJob2D = NONE
+TimeSeriesVars3D = ()
+ChunckJob3D = NONE
+Seasonal=OFF
+
+[Post_1Y_diaptr_W]
+Patches = ()
+GatherWithInternal = (nav_lat, olevel, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (zomsfglo, zomsfatl, zomsfpac, zomsfind, zomsfipc)
+ChunckJob2D = NONE
+TimeSeriesVars3D = ()
+ChunckJob3D = NONE
+Seasonal=OFF
Index: CMIP6/DAMIP/CM61-LR-hist-stratO3-03.2150/COMP/orchidee.card
===================================================================
--- CMIP6/DAMIP/CM61-LR-hist-stratO3-03.2150/COMP/orchidee.card	(revision 4131)
+++ CMIP6/DAMIP/CM61-LR-hist-stratO3-03.2150/COMP/orchidee.card	(revision 4131)
@@ -0,0 +1,87 @@
+[Compatibility]
+libIGCM=1.0
+
+[UserChoices]
+# The variable DefSuffix gives the suffix of the orchidee.def file to be used.
+# By default the file orchidee.def_Choi will be selected.
+# Sef DefSuffix=Choi (default) to activate default 2-layer Choisnel hydrology
+# Set DefSuffix=CWRR to activate 11-layer CWRR hydrology
+DefSuffix=CWRR
+
+# VEGET_UPDATE_at_start=y : orchidee.driver will set VEGET_UPDATE=1Y at the first cumul period when starting a new simulation. 
+#                           After the first period, VEGET_UPDATE will be set according to the choice done below.  
+VEGET_UPDATE_at_start=n
+
+# VEGET_UPDATE=0Y : default, do not update the vegetation and woodharvest file except if starting without restart file
+# VEGET_UPDATE=1Y : update the vegetation and woodharvest file 1st of January each year
+VEGET_UPDATE=0Y
+
+# Specify output level for output files
+# Only the files sechiba_history.nc, sechiba_out_2.nc and sechiba_history_4dim.nc can be set here.
+# output_level_filename=0     : lowest level writing only variables needed for the monitoring
+# output_level_filename=12    : highest level which will output all variables
+# output_level_filename=NONE  : deactivate the file
+output_level_sechiba_history = 0
+output_level_sechiba_out_2 = NONE
+output_level_sechiba_history_4dim = NONE
+
+# Specify output frequency for each file [1y, 1mo, 1d, 10800s, 1ts]
+# Settings using WriteFrequency in config.card is not longer used
+output_freq_sechiba_history = 1mo
+output_freq_sechiba_out_2 = 1d
+output_freq_sechiba_history_4dim = 1d
+
+
+[InitialStateFiles]
+List=	(${R_IN}/SRF/soils_param.nc, . ), \
+	(${R_IN}/SRF/reftemp.nc, . ), \
+	(${R_IN}/SRF/routing.nc, . ), \
+        (${R_IN}/SRF/albedo/alb_bg_modisopt_2D_ESA_v2.nc, alb_bg.nc ), \
+        (${R_IN}/SRF/cartepente2d_15min.nc, .)
+
+[BoundaryFiles]
+List= (${R_IN}/CMIP6/${config_UserChoices_LongName}/${config_UserChoices_ModelName}/${config_UserChoices_ExperimentName}/${config_UserChoices_Member}/${year}/dr2xml_orchidee.xml, .)
+ListNonDel= (${R_IN}/SRF/PFTMAPS/CMIP6/ESA-LUH2v2/historical/15PFT.v1/PFTmap_1850.nc, PFTmap.nc),\
+            (${R_IN}/SRF/WOODHARVEST/LUH2v2/historical/woodharvest_1850.nc,           woodharvest.nc)
+
+
+[SmoothFiles]
+List= ()
+
+[ParametersFiles]
+List=	(${SUBMIT_DIR}/PARAM/orchidee.def_${DefSuffix}, orchidee.def)   ,\
+    (${SUBMIT_DIR}/PARAM/ping_orchidee.xml, . )                       ,\
+	(${MODIPSL}/modeles/ORCHIDEE/src_xml/file_def_orchidee.xml, .)  ,\
+	(${MODIPSL}/modeles/ORCHIDEE/src_xml/file_def_input_orchidee.xml, .) ,\
+	(${MODIPSL}/modeles/ORCHIDEE/src_xml/context_orchidee.xml, .)   ,\
+	(${MODIPSL}/modeles/ORCHIDEE/src_xml/field_def_orchidee.xml, .)
+
+[RestartFiles]
+List=	(sechiba_rest_out.nc, sechiba_rest.nc, sechiba_rest_in.nc)
+
+[OutputText]
+List=   (out_orchidee, orchidee.def, used_orchidee.def, iodef.xml, context_orchidee.xml, field_def_orchidee.xml, file_def_orchidee.xml, file_def_input_orchidee.xml, river_desc.nc)
+
+[OutputFiles]
+List=   (sechiba_history.nc,   ${R_OUT_SRF_O_M}/${PREFIX}_1M_sechiba_history.nc, Post_1M_sechiba_history), \
+        (sechiba_history_4dim.nc,${R_OUT_SRF_O_M}/${PREFIX}_1M_sechiba_history_4dim.nc, NONE), \
+        (sechiba_out_2.nc,     ${R_OUT_SRF_O_H}/${PREFIX}_HF_sechiba_out_2.nc,   NONE)
+
+[Post_1M_sechiba_history]
+Patches = ()
+GatherWithInternal = (lon, lat, time_counter, Areas, Contfrac, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (nobiofrac, alb_nir, alb_vis, evap, fluxlat, fluxsens, rain, runoff, snow, snownobio, snowf, frac_snow, subli, tair, temp_sol, drainage, mrsos, mrso, TWBR, riverflow, coastalflow, DelSoilMoist_daily, DelIntercept_daily, DelSWE_daily, delstock_routing, LAImean, transpir, evapnu, lwdown, swdown, t2m, gppCrop, rhCrop)
+ChunckJob2D = NONE
+TimeSeriesVars3D = (lai, maxvegetfrac, vegetfrac, nee, gpp, growth_resp, hetero_resp, humrel, inter, maint_resp, npp, precisol)
+ChunckJob3D = NONE
+Seasonal = ON
+
+[Post_HF_sechiba_out_2]
+Patches = ()
+GatherWithInternal = (lon, lat, time_counter, Areas, Contfrac, time_centered, time_centered_bounds)
+TimeSeriesVars2D = ()
+ChunckJob2D = NONE
+TimeSeriesVars3D = (snowdz, snowtemp, snowrho)
+ChunckJob3D = NONE
+Seasonal = OFF
+
Index: CMIP6/DAMIP/CM61-LR-hist-stratO3-03.2150/COMP/pisces.card
===================================================================
--- CMIP6/DAMIP/CM61-LR-hist-stratO3-03.2150/COMP/pisces.card	(revision 4131)
+++ CMIP6/DAMIP/CM61-LR-hist-stratO3-03.2150/COMP/pisces.card	(revision 4131)
@@ -0,0 +1,124 @@
+[Compatibility]
+libIGCM=1.0
+
+[UserChoices]
+OutputLevel=1
+
+[InitialStateFiles]
+List= ()
+
+[BoundaryFiles]
+List=	()
+
+ListNonDel=  (${R_IN}/OCE/IPSLCM6/${opa9_UserChoices_ORCA_version}/DIC_GLODAPv2.1_annual_eORCA_R1.nc         , . ), \
+             (${R_IN}/OCE/IPSLCM6/${opa9_UserChoices_ORCA_version}/Alkalini_GLODAPv2.1_annual_eORCA_R1.nc    , . ), \
+             (${R_IN}/OCE/IPSLCM6/${opa9_UserChoices_ORCA_version}/O2_WOA2009_monthly_eORCA_R1.nc            , . ), \
+             (${R_IN}/OCE/IPSLCM6/${opa9_UserChoices_ORCA_version}/PO4_WOA2009_monthly_eORCA_R1.nc           , . ), \
+             (${R_IN}/OCE/IPSLCM6/${opa9_UserChoices_ORCA_version}/Si_WOA2009_monthly_eORCA_R1.nc            , . ), \
+             (${R_IN}/OCE/IPSLCM6/${opa9_UserChoices_ORCA_version}/DOC_PISCES_monthly_eORCA_R1.nc            , . ), \
+             (${R_IN}/OCE/IPSLCM6/${opa9_UserChoices_ORCA_version}/Fer_PISCES_monthly_eORCA_R1.nc            , . ), \
+             (${R_IN}/OCE/IPSLCM6/${opa9_UserChoices_ORCA_version}/NO3_WOA2009_monthly_eORCA_R1.nc           , . ), \
+             (${R_IN}/OCE/IPSLCM6/${opa9_UserChoices_ORCA_version}/Dust_inca_LOI/DUST_INCA_LOI6012-histAER_1M_1850.nc, dust.orca.nc       ), \
+             (${R_IN}/OCE/IPSLCM6/${opa9_UserChoices_ORCA_version}/Dust_inca_LOI/weights_LMD144142_eORCA1_bilinear.nc, weights_lmd144142_bilin.nc ), \
+             (${R_IN}/OCE/IPSLCM6/${opa9_UserChoices_ORCA_version}/pmarge_etopo_eORCA_R1.nc                  , . ), \
+             (${R_IN}/OCE/IPSLCM6/${opa9_UserChoices_ORCA_version}/river_global_news_eORCA_R1.nc             , . ), \
+             (${R_IN}/OCE/IPSLCM6/${opa9_UserChoices_ORCA_version}/Ndep_input4MIPs/Ndep_input4MIPs_surfaceFluxes_CMIP_NCAR-CCMI-2-0_gn_185001-185012-clim.nc , ndeposition.orca.nc ), \
+             (${R_IN}/OCE/IPSLCM6/${opa9_UserChoices_ORCA_version}/Ndep_input4MIPs/weights_CMIP_NCAR-CCMI_eORCA1_bilinear.nc, weights_2d_bilin.nc ), \
+             (${R_IN}/OCE/IPSLCM6/${opa9_UserChoices_ORCA_version}/par_fraction_gewex_clim90s00s_366days_eORCA_R1.nc , par_fraction_gewex_clim90s00s_eORCA_R1.nc ), \
+             (${R_IN}/OCE/IPSLCM6/${opa9_UserChoices_ORCA_version}/Solubility_T62_Mahowald_eORCA_R1.nc       , . )
+
+										  
+[SmoothFiles]
+List=  ()
+
+[ParametersFiles]
+List=	(${MODIPSL}/modeles/NEMOGCM/CONFIG/SHARED/namelist_top_ref                             , namelist_top_ref           ), \
+        (${MODIPSL}/modeles/NEMOGCM/CONFIG/SHARED/namelist_pisces_ref                          , namelist_pisces_ref        ), \
+        (${MODIPSL}/modeles/NEMOGCM/CONFIG/SHARED/namelist_cfc_ref                             , namelist_cfc_ref           ), \
+        (${MODIPSL}/modeles/NEMOGCM/CONFIG/ORCA1_LIM3_PISCES/EXP00/field_def_nemo-pisces.xml   , field_def_nemo-pisces.xml  ), \
+        (${MODIPSL}/modeles/NEMOGCM/CONFIG/ORCA1_LIM3_PISCES/EXP00/field_def_nemo-inerttrc.xml , field_def_nemo-inerttrc.xml), \
+        (${MODIPSL}/modeles/NEMOGCM/CONFIG/ORCA1_LIM3_PISCES/EXP00/CFCs_CDIAC.dat              , CFCs_CDIAC.dat             ), \
+     	(${SUBMIT_DIR}/PARAM/namelist_top_${RESOL_OCE}piC_cfg                                  , namelist_top_cfg           ), \
+        (${SUBMIT_DIR}/PARAM/namelist_pisces_${RESOL_OCE}_cfg                                  , namelist_pisces_cfg        ), \
+        (${SUBMIT_DIR}/PARAM/namelist_cfc_cfg                                                  , namelist_cfc_cfg           ), \
+        (${SUBMIT_DIR}/PARAM/file_def_nemo-pisces.xml                                          , file_def_nemo-pisces.xml   )
+        
+
+[RestartFiles]
+List=	(${config_UserChoices_JobName}_${NEMO_END}_restart_trc.nc,  restart_trc.nc, restart_trc.nc)
+
+[OutputText]
+List=   (namelist_top_ref, namelist_cfg, namelist_pisces_ref, namelist_pisces_cfg, tracer.stat)
+
+[OutputFiles]
+List=   (${config_UserChoices_JobName}_1y_ptrc_T.nc        , ${R_OUT_MBG_O_Y}/${PREFIX}_1Y_ptrc_T.nc    , NONE   ) , \
+        (${config_UserChoices_JobName}_1y_diad_T.nc        , ${R_OUT_MBG_O_Y}/${PREFIX}_1Y_diad_T.nc    , NONE   ) , \
+        (${config_UserChoices_JobName}_1y_inerttrc.nc      , ${R_OUT_MBG_O_Y}/${PREFIX}_1Y_inerttrc.nc  , NONE      ) , \
+    	(${config_UserChoices_JobName}_1m_bioscalar.nc     , ${R_OUT_MBG_O_M}/${PREFIX}_1M_bioscalar.nc , Post_1M_bioscalar) , \
+        (${config_UserChoices_JobName}_1m_ptrc_T.nc        , ${R_OUT_MBG_O_M}/${PREFIX}_1M_ptrc_T.nc    , NONE) , \
+        (${config_UserChoices_JobName}_1m_diad_T.nc        , ${R_OUT_MBG_O_M}/${PREFIX}_1M_diad_T.nc    , NONE) , \
+    	(${config_UserChoices_JobName}_1d_bioscalar.nc     , ${R_OUT_MBG_O_D}/${PREFIX}_1D_bioscalar.nc , NONE)
+
+[Post_1D_bioscalar]
+Patches = ()
+GatherWithInternal = (time_counter, time_instant, time_instant_bounds)
+TimeSeriesVars2D = (pno3tot, ppo4tot, psiltot, palktot, pfertot, tcflx, tcflxcum, tcexp, tintpp, tnfix, tdenit)
+ChunckJob2D = NONE
+TimeSeriesVars3D = ()
+ChunckJob3D = NONE
+Seasonal=OFF
+
+[Post_1M_bioscalar]
+Patches = ()
+GatherWithInternal = (time_counter, time_instant, time_instant_bounds)
+TimeSeriesVars2D = (pno3tot, ppo4tot, psiltot, palktot, pfertot, tcflx, tcflxcum, tcexp, tintpp, tnfix, tdenit)
+ChunckJob2D = NONE
+TimeSeriesVars3D = ()
+ChunckJob3D = NONE
+Seasonal=OFF
+
+[Post_1M_ptrc_T]
+Patches = ()
+GatherWithInternal = (nav_lon, nav_lat, olevel, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = ()
+ChunckJob2D = OFF
+TimeSeriesVars3D = (Alkalini, NCHL, DCHL, DIC, Fer, NO3, O2, PO4, Si)
+ChunckJob3D = OFF
+Seasonal=OFF
+
+[Post_1M_diad_T]
+Patches = ()
+GatherWithInternal = (nav_lon, nav_lat, olevel, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (Cflx, Dpco2, EPC100, INTPP)
+ChunckJob2D = OFF
+TimeSeriesVars3D = (TPP)
+ChunckJob3D = OFF
+Seasonal=OFF
+
+[Post_1Y_ptrc_T]
+Patches = ()
+GatherWithInternal = (nav_lon, nav_lat, olevel, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = ()
+ChunckJob2D = OFF
+TimeSeriesVars3D = (Alkalini, NCHL, DCHL, DIC, Fer, NO3, O2, PO4, Si )
+ChunckJob3D = NONE
+Seasonal=OFF
+
+[Post_1Y_diad_T]
+Patches = ()
+GatherWithInternal = (nav_lon, nav_lat, olevel, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (Cflx, Dpco2, EPC100, Heup,  Nfix)
+ChunckJob2D = 50Y
+TimeSeriesVars3D = (PAR, TPP)
+ChunckJob3D = 50Y
+Seasonal=OFF
+
+[Post_1Y_inerttrc]
+Patches = ()
+GatherWithInternal = (nav_lon, nav_lat, olevel, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = ()
+ChunckJob2D = OFF
+TimeSeriesVars3D = (Age)
+ChunckJob3D = NONE
+Seasonal=OFF
+
Index: CMIP6/DAMIP/CM61-LR-hist-stratO3-03.2150/COMP/stomate.card
===================================================================
--- CMIP6/DAMIP/CM61-LR-hist-stratO3-03.2150/COMP/stomate.card	(revision 4131)
+++ CMIP6/DAMIP/CM61-LR-hist-stratO3-03.2150/COMP/stomate.card	(revision 4131)
@@ -0,0 +1,59 @@
+[Compatibility]
+libIGCM=1.0
+
+[UserChoices]
+
+# Specify output level for output files
+# Only the files stomate_history.nc and stomate_ipcc_history.nc can be set here.
+# output_level_filname=0     : lowest level writing only variables needed for the monitoring
+# output_level_filname=1     : highest level which will output all variables
+# output_level_filname=NONE  : deactivate the file
+output_level_stomate_history = 0 
+output_level_stomate_ipcc_history = 0
+
+# Specify output frequency for each file [1y, 1mo, 1d]
+# Settings using WriteFrequency in config.card are not longer used
+output_freq_stomate_history = 1mo
+output_freq_stomate_ipcc_history = 1mo
+
+
+[InitialStateFiles]
+List=   ()
+
+[BoundaryFiles]
+List=   ()
+ListNonDel= ()
+
+[SmoothFiles]
+List=   ()
+
+[ParametersFiles]
+List=   ()
+
+[RestartFiles]
+List=   (stomate_rest_out.nc, stomate_rest.nc, stomate_rest_in.nc)
+
+[OutputText]
+List=   ()
+
+[OutputFiles]
+List=   (stomate_history.nc,      ${R_OUT_SBG_O_M}/${PREFIX}_1M_stomate_history.nc,      Post_1M_stomate_history),    \
+        (stomate_ipcc_history.nc, ${R_OUT_SBG_O_M}/${PREFIX}_1M_stomate_ipcc_history.nc, Post_1M_stomate_ipcc_history)
+
+[Post_1M_stomate_history]
+Patches = ()
+GatherWithInternal = (lon, lat, Areas, CONTFRAC, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (CONVFLUX,CFLUX_PROD10,CFLUX_PROD100,HARVEST_ABOVE,WOOD_HARVEST)
+ChunckJob2D = NONE
+TimeSeriesVars3D = (VEGET_COV_MAX,NPP,GPP,HET_RESP,MAINT_RESP,GROWTH_RESP,TOTAL_M,TOTAL_BM_LITTER,TOTAL_SOIL_CARB,WOOD_HARVEST_PFT)
+ChunckJob3D = NONE
+Seasonal = ON
+
+[Post_1M_stomate_ipcc_history]
+Patches = ()
+GatherWithInternal = (lon, lat, Areas, CONTFRAC, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (cProduct, lai, gpp, ra, fLuc, nbp, fVegLitter, fLitterSoil, cLeaf, cWood, cRoot, cMisc, cLitterAbove, cLitterBelow, cSoilFast, cSoilMedium, cSoilSlow, cMassVariation, treeFracPrimDec, treeFracPrimEver, c3PftFrac, c4PftFrac, rGrowth, rMaint, nppLeaf, nppWood, nppRoot, nep, fWoodharvest, cVegCrop, cLitterCrop, cSoilCrop, nppCrop, raCrop)
+ChunckJob2D = NONE
+TimeSeriesVars3D = ()
+ChunckJob3D = NONE
+Seasonal = ON
Index: CMIP6/DAMIP/CM61-LR-hist-stratO3-03.2150/COMP/xios.card
===================================================================
--- CMIP6/DAMIP/CM61-LR-hist-stratO3-03.2150/COMP/xios.card	(revision 4131)
+++ CMIP6/DAMIP/CM61-LR-hist-stratO3-03.2150/COMP/xios.card	(revision 4131)
@@ -0,0 +1,29 @@
+[Compatibility]
+libIGCM=1.0
+
+[UserChoices]
+
+[InitialStateFiles]
+List=	()
+
+[BoundaryFiles]
+List=	()
+ListNonDel= ()
+
+[SmoothFiles]
+List=	()
+
+[ParametersFiles]
+List=	()
+
+[RestartFiles]
+List=  (xios_registry.bin, xios_registry.bin, xios_registry.bin)
+
+[OutputText]
+List=   (out_xios.x.err.*, out_xios.x.out.*, debug_notroot.03, debug.root.03)
+
+[OutputFiles]
+List=   ()
+
+
+
Index: CMIP6/DAMIP/CM61-LR-hist-stratO3-03.2150/DRIVER/lim2.driver
===================================================================
--- CMIP6/DAMIP/CM61-LR-hist-stratO3-03.2150/DRIVER/lim2.driver	(revision 4131)
+++ CMIP6/DAMIP/CM61-LR-hist-stratO3-03.2150/DRIVER/lim2.driver	(revision 4131)
@@ -0,0 +1,64 @@
+#!/bin/ksh
+
+#-----------------------------------
+function ICE_Initialize
+{ 
+    IGCM_debug_PushStack "ICE_Initialize"
+
+    echo INITIALIZE ICE !!!
+
+    IGCM_debug_PopStack "ICE_Initialize"
+}
+
+#-----------------------------------
+function ICE_Update
+{
+    IGCM_debug_PushStack "ICE_Update"
+
+    ##--Write Frequency for iomput
+    ## Differents frequencies are allowed for ICE files
+
+    VI1D_ENABLE=".FALSE."
+    VI5D_ENABLE=".FALSE."
+    VI1M_ENABLE=".FALSE."
+    VI1Y_ENABLE=".FALSE."
+
+    for frequency in ${config_ICE_WriteFrequency} ; do
+        case ${frequency} in
+            ( 1D|1d ) VI1D_ENABLE=".TRUE." ;;
+            ( 5D|5d ) VI5D_ENABLE=".TRUE." ;;
+            ( 1M|1m ) VI1M_ENABLE=".TRUE." ;;
+            ( *[yY] ) VI1Y_ENABLE=".TRUE." ;;
+        esac
+    done
+
+
+  # Update iodef.xml
+
+    IGCM_debug_Print 1 'Informations into iodef.xml : VI1D_ENABLE VI5D_ENABLE VI1M_ENABLE VI1Y_ENABLE '
+    IGCM_debug_Print 1 ${VI1D_ENABLE}  ${VI5D_ENABLE} ${VI1M_ENABLE} ${VI1Y_ENABLE}
+
+    IGCM_comp_modifyXmlFile nonblocker file_def_nemo-lim.xml 1d_lim enabled ${VI1D_ENABLE}
+    IGCM_comp_modifyXmlFile nonblocker file_def_nemo-lim.xml 5d_lim enabled ${VI5D_ENABLE}
+    IGCM_comp_modifyXmlFile nonblocker file_def_nemo-lim.xml 1m_lim enabled ${VI1M_ENABLE}
+    IGCM_comp_modifyXmlFile nonblocker file_def_nemo-lim.xml 1y_lim enabled ${VI1Y_ENABLE}
+
+    IGCM_comp_modifyXmlFile nonblocker file_def_nemo-lim.xml 1d_lim output_level ${lim2_UserChoices_OutputLevel}
+    IGCM_comp_modifyXmlFile nonblocker file_def_nemo-lim.xml 5d_lim output_level ${lim2_UserChoices_OutputLevel}
+    IGCM_comp_modifyXmlFile nonblocker file_def_nemo-lim.xml 1m_lim output_level ${lim2_UserChoices_OutputLevel}
+    IGCM_comp_modifyXmlFile nonblocker file_def_nemo-lim.xml 1y_lim output_level ${lim2_UserChoices_OutputLevel}
+
+    echo UPDATE ICE !!!
+
+    IGCM_debug_PopStack "ICE_Update"
+}
+
+#-----------------------------------
+function ICE_Finalize
+{
+    IGCM_debug_PushStack "ICE_Finalize"
+
+    echo FINALIZE ICE !!!
+
+    IGCM_debug_PopStack "ICE_Finalize"
+}
Index: CMIP6/DAMIP/CM61-LR-hist-stratO3-03.2150/DRIVER/lim3.driver
===================================================================
--- CMIP6/DAMIP/CM61-LR-hist-stratO3-03.2150/DRIVER/lim3.driver	(revision 4131)
+++ CMIP6/DAMIP/CM61-LR-hist-stratO3-03.2150/DRIVER/lim3.driver	(revision 4131)
@@ -0,0 +1,65 @@
+#!/bin/ksh
+
+#-----------------------------------
+function ICE_Initialize
+{ 
+    IGCM_debug_PushStack "ICE_Initialize"
+
+    echo INITIALIZE ICE !!!
+
+    IGCM_debug_PopStack "ICE_Initialize"
+}
+
+#-----------------------------------
+function ICE_Update
+{
+    IGCM_debug_PushStack "ICE_Update"
+
+    ##--Write Frequency for iomput
+    ## Differents frequencies are allowed for ICE files
+
+    VI1D_ENABLE=".FALSE."
+    VI5D_ENABLE=".FALSE."
+    VI1M_ENABLE=".FALSE."
+    VI1Y_ENABLE=".FALSE."
+
+    for frequency in ${config_ICE_WriteFrequency} ; do
+        case ${frequency} in
+            ( 1D|1d ) VI1D_ENABLE=".TRUE." ;;
+            ( 5D|5d ) VI5D_ENABLE=".TRUE." ;;
+            ( 1M|1m ) VI1M_ENABLE=".TRUE." ;;
+            ( *[yY] ) VI1Y_ENABLE=".TRUE." ;;
+        esac
+    done
+
+
+  # Update iodef.xml
+
+    IGCM_debug_Print 1 'Informations into iodef.xml : VI1D_ENABLE VI5D_ENABLE VI1M_ENABLE VI1Y_ENABLE '
+    IGCM_debug_Print 1 ${VI1D_ENABLE}  ${VI5D_ENABLE} ${VI1M_ENABLE} ${VI1Y_ENABLE}
+
+    IGCM_comp_modifyXmlFile nonblocker file_def_nemo-lim.xml 1d_lim enabled ${VI1D_ENABLE}
+    IGCM_comp_modifyXmlFile nonblocker file_def_nemo-lim.xml 5d_lim enabled ${VI5D_ENABLE}
+    IGCM_comp_modifyXmlFile nonblocker file_def_nemo-lim.xml 1m_lim enabled ${VI1M_ENABLE}
+    IGCM_comp_modifyXmlFile nonblocker file_def_nemo-lim.xml 1y_lim enabled ${VI1Y_ENABLE}
+
+    IGCM_comp_modifyXmlFile nonblocker file_def_nemo-lim.xml 1d_lim output_level ${lim3_UserChoices_OutputLevel}
+    IGCM_comp_modifyXmlFile nonblocker file_def_nemo-lim.xml 5d_lim output_level ${lim3_UserChoices_OutputLevel}
+    IGCM_comp_modifyXmlFile nonblocker file_def_nemo-lim.xml 1m_lim output_level ${lim3_UserChoices_OutputLevel}
+    IGCM_comp_modifyXmlFile nonblocker file_def_nemo-lim.xml 1y_lim output_level ${lim3_UserChoices_OutputLevel}
+
+
+    echo UPDATE ICE !!!
+
+    IGCM_debug_PopStack "ICE_Update"
+}
+
+#-----------------------------------
+function ICE_Finalize
+{
+    IGCM_debug_PushStack "ICE_Finalize"
+
+    echo FINALIZE ICE !!!
+
+    IGCM_debug_PopStack "ICE_Finalize"
+}
Index: CMIP6/DAMIP/CM61-LR-hist-stratO3-03.2150/DRIVER/lmdz.driver
===================================================================
--- CMIP6/DAMIP/CM61-LR-hist-stratO3-03.2150/DRIVER/lmdz.driver	(revision 4131)
+++ CMIP6/DAMIP/CM61-LR-hist-stratO3-03.2150/DRIVER/lmdz.driver	(revision 4131)
@@ -0,0 +1,708 @@
+#!/bin/ksh
+#-----------------------------------------------------------------
+function ATM_Initialize
+{
+    IGCM_debug_PushStack "ATM_Initialize"
+
+    RESOL_ATM=$( echo $RESOL | awk "-Fx" '{print $2}' | awk "-F-" '{print $1}')
+
+    [ -f ${SUBMIT_DIR}/../.resol ] && eval $(grep RESOL_ATM_3D ${SUBMIT_DIR}/../.resol) || RESOL_ATM_3D=96x95x39
+
+    RESOL_ATM_Z=$( echo ${RESOL_ATM_3D} | awk "-Fx" '{print $3}' )
+    RESOL_ATM_X=$( echo ${RESOL_ATM_3D} | awk "-Fx" '{print $1}' )
+    RESOL_ATM_Y=$( echo ${RESOL_ATM_3D} | awk "-Fx" '{print $2}' )
+    RESOL_ATM_XY="${RESOL_ATM_X}x${RESOL_ATM_Y}"
+
+    ##- LMDZ physics version
+    ##  Read LMDZ_Physics option in lmdz.card, if not present take default value AP (old physics) 
+    if [ ! X${lmdz_UserChoices_LMDZ_Physics} = X ] ; then
+	LMDZ_Physics=${lmdz_UserChoices_LMDZ_Physics}
+    else
+	LMDZ_Physics=AP
+    fi
+    echo LMDZ physics version : ${LMDZ_Physics}
+
+    ##- Create_etat0_limit version
+    ##  Define variable CREATE only if it is set in lmdz.card section UserChoices.
+    ##  This variable is only used in lmdz.card to choose input files.
+    if [ ! X${lmdz_UserChoices_CREATE} = X ] ; then
+	IGCM_card_DefineVariableFromOption ${SUBMIT_DIR}/COMP/lmdz.card UserChoices CREATE
+	CREATE=${lmdz_UserChoices_CREATE}
+	echo create_etat0_limit version : ${CREATE}
+    fi
+
+
+    ## - LMDZ choice of config.def file
+    ##   ConfType must be set in lmdz.card
+    ConfType=${lmdz_UserChoices_ConfType}
+
+    ##- LMDZ output level, to be set in lmdz.card
+    if [ X${lmdz_UserChoices_OutLevel} = X ] ; then
+	# OutLevel is not set. Take default value low.
+	OutLevel=low
+    else
+	OutLevel=${lmdz_UserChoices_OutLevel}
+    fi
+
+    ##-- Output frequency purpose ....
+    ##--  Initialisation  ....
+    ok_mensuel=.FALSE.
+    ok_journe=.FALSE.
+    ok_hf=.FALSE.
+    ok_hf3h=.FALSE.
+    ok_hf3hm=.FALSE.
+    ok_stn=.FALSE.
+
+
+    case ${config_UserChoices_PeriodLength} in
+	1Y|1y|1M|1m) ok_mensuel=.TRUE. ;;
+	5D|5d|1D|1d) ok_journe=.TRUE. ;;
+    esac
+
+    for frequency in ${config_ATM_WriteFrequency} ; do
+	case ${frequency} in
+	    1M|1m) ok_mensuel=.TRUE. ;;
+	esac
+	case ${frequency} in
+	    5D|5d|1D|1d) ok_journe=.TRUE. ;;
+	esac
+	case ${frequency} in
+	    HF|hf) ok_hf=.TRUE. ;;
+	esac
+	case ${frequency} in 
+	    HF3h|hf3h) ok_hf3h=.TRUE. ;;
+	esac
+	case ${frequency} in 
+	    HF3hm|hf3hm) ok_hf3hm=.TRUE. ;;
+	esac
+	case ${frequency} in
+	    STN|stn) ok_stn=.TRUE. ;;
+	esac
+    done
+
+
+##  Read LMDZ_COSP_OK in lmdz.card
+    if [ X${lmdz_UserChoices_LMDZ_COSP_OK} = Xy ] ; then
+	##  LMDZ_COSP_OK=y, now read all other COSP variables
+	##  Read LMDZ_COSP_monthly in lmdz.card
+	if [ X${lmdz_UserChoices_LMDZ_COSP_monthly} = Xy ] ; then
+	    LMDZ_COSP_monthly=.TRUE.
+	else
+	    LMDZ_COSP_monthly=.FALSE.
+	fi
+        ##  Read LMDZ_COSP_daily in lmdz.card
+	if [ X${lmdz_UserChoices_LMDZ_COSP_daily} = Xy ] ; then
+	    LMDZ_COSP_daily=.TRUE.
+	else
+	    LMDZ_COSP_daily=.FALSE.
+	fi
+        ##  Read LMDZ_COSP_hf in lmdz.card
+	if [ X${lmdz_UserChoices_LMDZ_COSP_hf} = Xy ] ; then
+	    LMDZ_COSP_hf=.TRUE.
+	else
+	    LMDZ_COSP_hf=.FALSE.
+	fi
+    else
+	# LMDZ_COSP_OK=n : All cosp output are deactivated
+	LMDZ_COSP_monthly=.FALSE.
+	LMDZ_COSP_daily=.FALSE.
+	LMDZ_COSP_hf=.FALSE.
+    fi	
+
+    ##  Read LMDZ_NMC_monthly in lmdz.card
+    if [ X${lmdz_UserChoices_LMDZ_NMC_monthly} = Xy ] ; then
+	LMDZ_NMC_monthly=.TRUE.
+    else
+	LMDZ_NMC_monthly=.FALSE.
+    fi
+    
+    ## Read LMDZ_NMC_daily in lmdz.card
+    if [ X${lmdz_UserChoices_LMDZ_NMC_daily} = Xy ] ; then
+	LMDZ_NMC_daily=.TRUE.
+    else
+	LMDZ_NMC_daily=.FALSE.
+    fi
+    
+    ## Read LMDZ_NMC_hf in lmdz.card
+    if [ X${lmdz_UserChoices_LMDZ_NMC_hf} = Xy ] ; then
+	LMDZ_NMC_hf=.TRUE.
+    else
+	LMDZ_NMC_hf=.FALSE.
+    fi
+    
+
+    IGCM_debug_PopStack "ATM_Initialize"
+}
+
+#-----------------------------------------------------------------
+function ATM_Update
+{
+    IGCM_debug_PushStack "ATM_Update"
+
+    ##-- GHG forcing :
+    ##   If forcing file exist in run directory, read values for the current year 
+    ##   and set in config.def. If not use the default value set in config.def
+
+    # Read value for solaire from file SOLARANDVOLCANOES.txt. If file not existing, take DEFAULT value from file. 
+    IGCM_debug_Print 1 "Note that the solaire parameter is here below changed but it is only used by LMDZ for old physics(AP and NPv3.2)"
+    IGCM_debug_Print 1 "For newer physics with iflag_rrtm=1 and ok_suntime_rrtm=y, the solar constant is instead taken from solarforcing.nc file"
+    if [ -f SOLARANDVOLCANOES.txt ] ; then
+	value=`grep Annee_${year} SOLARANDVOLCANOES.txt | awk -F= '{print $2}'`
+	if [ X"${value}" = X ] ; then
+	    # The grep returned empty variable, stop execution
+	    IGCM_debug_Exit "The file SOLARANDVOLCANOES.txt do not contain the current year."
+	    IGCM_debug_Verif_Exit
+	fi
+    else
+	value=DEFAULT
+    fi
+    IGCM_comp_modifyDefFile nonblocker config.def solaire $value
+
+    # Read value for eccentricity from file Eccentricity.txt. If file not existing, take DEFAULT value from file.
+    if [ -f Eccentricity.txt ] ; then
+	value=`grep Annee_${year} Eccentricity.txt | awk -F= '{print $2}'`
+	if [ X"${value}" = X ] ; then
+	    # The grep returned empty variable, stop execution
+	    IGCM_debug_Exit "The file Eccentricity.txt do not contain the current year."
+	    IGCM_debug_Verif_Exit
+	fi
+    else
+	value=DEFAULT
+    fi
+    IGCM_comp_modifyDefFile nonblocker config.def R_ecc $value
+
+    # Read value for obliquity from file Obliquity.txt. If file not existing, take DEFAULT value from file.
+    if [ -f Obliquity.txt ] ; then
+	value=`grep Annee_${year} Obliquity.txt | awk -F= '{print $2}'`
+	if [ X"${value}" = X ] ; then
+	    # The grep returned empty variable, stop execution
+	    IGCM_debug_Exit "The file Obliquity.txt do not contain the current year."
+	    IGCM_debug_Verif_Exit
+	fi
+    else
+	value=DEFAULT
+    fi
+    IGCM_comp_modifyDefFile nonblocker config.def R_incl $value
+
+    # Read value for perihelie from file Perihelie.txt. If file not existing, take DEFAULT value from file.
+    if [ -f Perihelie.txt ] ; then
+	value=`grep Annee_${year} Perihelie.txt | awk -F= '{print $2}'`
+	if [ X"${value}" = X ] ; then
+	    # The grep returned empty variable, stop execution
+	    IGCM_debug_Exit "The file Perihelie.txt do not contain the current year."
+	    IGCM_debug_Verif_Exit
+	fi
+    else
+	value=DEFAULT
+    fi
+    IGCM_comp_modifyDefFile nonblocker config.def R_peri $value
+
+    # Read value for co2_ppm from file CO2.txt. If file not existing, take DEFAULT value from file. 
+    # Calculate co2_ppm_per as co2_ppm*4.
+    if [ -f CO2.txt ] ; then
+       	value=`grep Annee_${year} CO2.txt | awk -F= '{print $2}'`
+	if [ X"${value}" = X ] ; then
+	    # The grep returned empty variable, stop execution
+	    IGCM_debug_Exit "The file CO2.txt do not contain the current year."
+	    IGCM_debug_Verif_Exit
+	fi
+	value4=`grep Annee_${year} CO2.txt | awk -F= '{print $2 * 4}'`
+    else
+	value=DEFAULT
+	value4=DEFAULT
+    fi
+    IGCM_comp_modifyDefFile nonblocker config.def co2_ppm $value
+    IGCM_comp_modifyDefFile nonblocker config.def co2_ppm_per $value4
+
+
+    # Read value for CH4_ppb from file CH4.txt. If file not existing, take DEFAULT value from file. 
+    if [ -f CH4.txt ] ; then
+	value=`grep Annee_${year} CH4.txt | awk -F= '{print $2}'`
+	if [ X"${value}" = X ] ; then
+	    # The grep returned empty variable, stop execution
+	    IGCM_debug_Exit "The file CH4.txt do not contain the current year."
+	    IGCM_debug_Verif_Exit
+	fi
+    else
+	value=DEFAULT
+    fi
+    IGCM_comp_modifyDefFile nonblocker config.def CH4_ppb $value
+
+
+    # Read value for N2O_ppb from file N2O.txt. If file not existing, take DEFAULT value from file. 
+    if [ -f N2O.txt ] ; then
+	value=`grep Annee_${year} N2O.txt | awk -F= '{print $2}'`
+	if [ X"${value}" = X ] ; then
+	    # The grep returned empty variable, stop execution
+	    IGCM_debug_Exit "The file N2O.txt do not contain the current year."
+	    IGCM_debug_Verif_Exit
+	fi
+    else
+	value=DEFAULT
+    fi
+    IGCM_comp_modifyDefFile nonblocker config.def N2O_ppb $value
+
+    # Read value for CFC11_ppt from file CFC11.txt. If file not existing, take DEFAULT value from file. 
+    if [ -f CFC11.txt ] ; then
+	value=`grep Annee_${year} CFC11.txt | awk -F= '{print $2}'`
+	if [ X"${value}" = X ] ; then
+	    # The grep returned empty variable, stop execution
+	    IGCM_debug_Exit "The file CFC11.txt do not contain the current year."
+	    IGCM_debug_Verif_Exit
+	fi
+    else
+	value=DEFAULT
+    fi
+    IGCM_comp_modifyDefFile nonblocker config.def CFC11_ppt $value
+
+
+    # Read value for CFC12_ppt from file CFC12.txt. If file not existing, take DEFAULT value from file. 
+    if [ -f CFC12.txt ] ; then
+	value=`grep Annee_${year} CFC12.txt | awk -F= '{print $2}'`
+	if [ X"${value}" = X ] ; then
+	    # The grep returned empty variable, stop execution
+	    IGCM_debug_Exit "The file CFC12.txt do not contain the current year."
+	    IGCM_debug_Verif_Exit
+	fi
+    else
+	value=DEFAULT
+    fi
+    IGCM_comp_modifyDefFile nonblocker config.def CFC12_ppt $value
+
+
+    ## Coupling Time Step : Take value of FreqCoupling set in oasis.card or if it is not set, take default value 86400
+    LMDZ_t_coupl=${oasis_UserChoices_FreqCoupling:-86400}
+    IGCM_debug_Print 3 "LMDZ_t_coupl "   ${LMDZ_t_coupl}
+    IGCM_comp_modifyDefFile nonblocker config.def t_coupl   ${LMDZ_t_coupl} 
+
+    ##-- Add special treatement for CARBON CYCLE
+    if [ X"${lmdz_UserChoices_CARBON_CYCLE}" = X"control" ] || [ X"${lmdz_UserChoices_CARBON_CYCLE}" = X"historical" ] ; then
+	ATM_Carbon_Update
+    fi
+
+
+    ##-- Set LMDZ_COSP_daily1979=y in section UserChoices in lmdz.card to activate 
+    ##   COSP daily output for years 1979 and later (mandatory for historical CMIP5 run).
+    if ([ X"${lmdz_UserChoices_LMDZ_COSP_daily1979}" = X"y" ] &&  [ ${year} -ge 1979 ]) ; then
+	LMDZ_COSP_daily=.TRUE.
+    fi
+
+    ## Modifiy 
+    IGCM_comp_modifyXmlFile nonblocker file_def_histmth_lmdz.xml histmth enabled ${ok_mensuel}
+    
+    IGCM_comp_modifyXmlFile nonblocker file_def_histday_lmdz.xml histday enabled ${ok_journe}
+    
+    if [ X${OutLevel} = Xlow ] || [ X${OutLevel} = Xmedium ] ; then
+	IGCM_comp_modifyXmlFile nonblocker file_def_histday_lmdz.xml histday output_level 2
+    else
+	IGCM_comp_modifyXmlFile nonblocker file_def_histday_lmdz.xml histday output_level 5
+    fi
+    
+    IGCM_comp_modifyXmlFile nonblocker file_def_histhf_lmdz.xml histhf enabled ${ok_hf}
+    
+    if [ X${OutLevel} = Xlow ] ; then
+	IGCM_comp_modifyXmlFile nonblocker file_def_histhf_lmdz.xml histhf output_level 5
+    elif [ X${OutLevel} = Xmedium ] ; then
+	IGCM_comp_modifyXmlFile nonblocker file_def_histhf_lmdz.xml histhf output_level 6
+    elif [ X${OutLevel} = Xhigh ] ; then
+	IGCM_comp_modifyXmlFile nonblocker file_def_histhf_lmdz.xml histhf output_level 7
+    fi
+    	
+    IGCM_comp_modifyXmlFile nonblocker file_def_histhf3h_lmdz.xml histhf3h enabled ${ok_hf3h}
+    IGCM_comp_modifyXmlFile nonblocker file_def_histhf3hm_lmdz.xml histhf3hm enabled ${ok_hf3hm}
+
+    IGCM_comp_modifyXmlFile nonblocker file_def_histstn_lmdz.xml histstn enabled ${ok_stn}
+
+    IGCM_comp_modifyXmlFile nonblocker file_def_histmthNMC_lmdz.xml histmthNMC enabled ${LMDZ_NMC_monthly}
+    IGCM_comp_modifyXmlFile nonblocker file_def_histdayNMC_lmdz.xml histdayNMC enabled ${LMDZ_NMC_daily}
+    IGCM_comp_modifyXmlFile nonblocker file_def_histhfNMC_lmdz.xml histhfNMC enabled ${LMDZ_NMC_hf}
+    
+    IGCM_comp_modifyXmlFile nonblocker file_def_histmthCOSP_lmdz.xml histmthCOSP enabled ${LMDZ_COSP_monthly}
+    IGCM_comp_modifyXmlFile nonblocker file_def_histdayCOSP_lmdz.xml histdayCOSP enabled ${LMDZ_COSP_daily}
+    IGCM_comp_modifyXmlFile nonblocker file_def_histhfCOSP_lmdz.xml histhfCOSP enabled ${LMDZ_COSP_hf}
+
+    # Activate the histstrataer output file only for configuration with interactive stratospheric aersols 
+    # done by setting the key word LMDZ_strataero=y in lmdz.card
+    if [ X${lmdz_UserChoices_LMDZ_strataero} = Xy ] ; then
+	IGCM_comp_modifyXmlFile nonblocker file_def_histstrataer_lmdz.xml histstrataer enabled .TRUE.
+    else
+	IGCM_comp_modifyXmlFile nonblocker file_def_histstrataer_lmdz.xml histstrataer enabled .FALSE.
+    fi
+
+
+    ## run.def parameters
+
+
+    ##-- Remise ou non a zero de la date initiale de LMDZ pour le fichier run.def
+    if [ ${CumulPeriod} -eq 1 ] ; then
+	IGCM_comp_modifyDefFile blocker run.def raz_date  1
+    else
+	IGCM_comp_modifyDefFile blocker run.def raz_date  0
+    fi
+
+    ##-- Calendar type for LMDZ and create_etat0_limit
+    case ${config_UserChoices_CalendarType} in
+        leap|gregorian)
+	    IGCM_comp_modifyDefFile blocker run.def calend  gregorian ;;
+        noleap)
+	    IGCM_comp_modifyDefFile blocker run.def calend  earth_365d ;;
+        360d)
+	    IGCM_comp_modifyDefFile blocker run.def calend  earth_360d ;;
+        *)
+	    IGCM_comp_modifyDefFile blocker run.def calend  earth_360d ;;
+    esac
+
+    IGCM_comp_modifyDefFile blocker run.def dayref    ${InitDay}
+    IGCM_comp_modifyDefFile blocker run.def nday      ${PeriodLengthInDays}
+
+    # Set anneeref different for gcm and ce0l
+    # Test if executable create_etat0_limit is present and lmdz.x is not present
+    if [ -f create_etat0_limit* ] || [ -f ce0l* ] && [ ! -f lmdz.x ] ; then
+	# for case ce0l : always take current year
+	IGCM_comp_modifyDefFile blocker run.def anneeref ${year}
+
+        # Temporary, set use_filtre_fft=n because we now use dyn3d for ce0l version where fft is not implemented. 
+        # In more recent versions of LMDZ, this will not be needed. 
+	IGCM_comp_modifyDefFile force   run.def use_filtre_fft n
+    else
+	# for case gcm : take first year of simulation
+	IGCM_comp_modifyDefFile blocker run.def anneeref ${InitYear}
+    fi
+
+    ## Determine from the variable ListOfComponents in config.card coupling to external models 
+    ## and set corresponding parameters in run.def
+    echo ListOfComponents now running : ${config_ListOfComponents[*]}
+
+    if [ X${config_ListOfComponents_SRF} = Xorchidee ] ; then
+	echo "Activate ORCHIDEE, set VEGET=y in run.def"
+	IGCM_comp_modifyDefFile blocker run.def VEGET y
+    else
+	echo "No ORCHIDEE, set VEGET=n in run.def"
+	IGCM_comp_modifyDefFile blocker run.def VEGET n
+    fi
+
+    if [ X${config_ListOfComponents_CPL} = Xoasis ] ; then
+	echo "Activate coupling to ocean, set type_ocean=couple in run.def"
+	IGCM_comp_modifyDefFile blocker run.def type_ocean couple
+    else
+	echo "LMDZ is running in forced mode without ocean model, set type_ocean=force in run.def"
+	IGCM_comp_modifyDefFile nonblocker run.def type_ocean force
+    fi
+
+    if [ X${config_ListOfComponents_CHM} = Xinca ] ; then
+	echo "Activate coupling to INCA, set type_trac=inca in run.def"
+	IGCM_comp_modifyDefFile blocker run.def type_trac inca
+    elif [ X${config_ListOfComponents_CHM} = Xreprobus ] ; then
+	echo "Activate coupling to REPROBUS, set type_trac=repr in run.def"
+	IGCM_comp_modifyDefFile blocker run.def type_trac repr
+        IGCM_comp_modifyDefFile blocker run.def config_inca none
+    else
+	echo "No coupling to chemistry model, set type_trac=lmdz in run.def"
+	IGCM_comp_modifyDefFile blocker run.def type_trac lmdz
+        IGCM_comp_modifyDefFile blocker run.def config_inca none
+    fi
+
+
+    # run.def : Activate the call to phytrac 
+    if [ ! X${lmdz_UserChoices_iflag_phytrac} = X ]; then 
+	IGCM_comp_modifyDefFile nonblocker run.def iflag_phytrac ${lmdz_UserChoices_iflag_phytrac}
+    else
+	IGCM_comp_modifyDefFile nonblocker run.def iflag_phytrac 0
+    fi 
+
+    # physiq.def : Activate the call to phytrac 
+    if [ ! X${lmdz_UserChoices_ok_bug_cv_trac} = X ]; then 
+	IGCM_comp_modifyDefFile nonblocker physiq.def ok_bug_cv_trac  ${lmdz_UserChoices_ok_bug_cv_trac}
+    else
+	IGCM_comp_modifyDefFile nonblocker physiq.def ok_bug_cv_trac  n
+    fi 
+
+    # config.def : Activate direct radiative effect if ok_ade=y
+    if [ ! X${lmdz_UserChoices_ok_ade} = X ]; then 
+	IGCM_comp_modifyDefFile nonblocker config.def ok_ade ${lmdz_UserChoices_ok_ade}
+    else
+	IGCM_comp_modifyDefFile nonblocker config.def ok_ade n
+    fi 
+
+    # config.def : Activate indirect radiative effect if ok_aie=y
+    if [ ! X${lmdz_UserChoices_ok_aie} = X ]; then 
+	IGCM_comp_modifyDefFile nonblocker config.def ok_aie ${lmdz_UserChoices_ok_aie}
+    else
+	IGCM_comp_modifyDefFile nonblocker config.def ok_aie n
+    fi 
+
+    # config.def : Activate online aerosol coupled model if aerosol_couple=y
+    if [ ! X${lmdz_UserChoices_aerosol_couple} = X ]; then 
+	IGCM_comp_modifyDefFile nonblocker config.def aerosol_couple ${lmdz_UserChoices_aerosol_couple}
+    else
+	IGCM_comp_modifyDefFile nonblocker config.def aerosol_couple n
+    fi 
+
+    # config.def : Activate online Ozone chemistry coupled model if chemistry_couple=y
+    if [ ! X${lmdz_UserChoices_chemistry_couple} = X ]; then 
+	IGCM_comp_modifyDefFile nonblocker config.def chemistry_couple ${lmdz_UserChoices_chemistry_couple}
+    else
+	IGCM_comp_modifyDefFile nonblocker config.def chemistry_couple n
+    fi 
+
+    # config.def : Activate reading of ozone in climatology if read_climoz=2
+    if [ ! X${lmdz_UserChoices_read_climoz} = X ]; then 
+	IGCM_comp_modifyDefFile nonblocker config.def read_climoz ${lmdz_UserChoices_read_climoz}
+    else
+	IGCM_comp_modifyDefFile nonblocker config.def read_climoz 0	
+    fi 
+
+    # config.def : Choose aerosol use in radiative effect 
+    #  type of coupled aerosol =1 (default) =2 => bc  only =3 => pom only =4 => seasalt only 
+    # =5 => dust only =6 => all aerosol    
+    if [ ! X${lmdz_UserChoices_flag_aerosol} = X ]; then 
+	IGCM_comp_modifyDefFile nonblocker config.def flag_aerosol ${lmdz_UserChoices_flag_aerosol}
+    else
+	IGCM_comp_modifyDefFile nonblocker config.def flag_aerosol 0
+    fi 
+
+    # config.def : Activate calcul of Cloud droplet number concentration if ok_cdnc=y
+    if [ ! X${lmdz_UserChoices_ok_cdnc} = X ]; then 
+	IGCM_comp_modifyDefFile nonblocker config.def ok_cdnc ${lmdz_UserChoices_ok_cdnc}
+    else
+	IGCM_comp_modifyDefFile nonblocker config.def ok_cdnc n	
+    fi 
+
+    # config.def : Activate COSP
+    if [ ! X${lmdz_UserChoices_LMDZ_COSP_OK} = X ]; then 
+	IGCM_comp_modifyDefFile nonblocker config.def ok_cosp ${lmdz_UserChoices_LMDZ_COSP_OK}
+    else
+	IGCM_comp_modifyDefFile nonblocker config.def ok_cosp n	
+    fi 
+
+    # config.def : Modify parameter pmagic if it is set in lmdz.card
+    if [ ! X${lmdz_UserChoices_pmagic} = X ]; then 
+	IGCM_comp_modifyDefFile nonblocker config.def pmagic ${lmdz_UserChoices_pmagic}
+    else
+	# Take default value set in config.def
+	IGCM_comp_modifyDefFile nonblocker config.def pmagic DEFAULT
+    fi 
+
+    # physiq.def : Modify parameter tau_gl if it is set in lmdz.card
+    if [ ! X${lmdz_UserChoices_tau_gl} = X ]; then 
+	IGCM_comp_modifyDefFile nonblocker physiq.def tau_gl ${lmdz_UserChoices_tau_gl}
+    else
+	# Take default value set in physiq.def
+	IGCM_comp_modifyDefFile nonblocker config.def tau_gl DEFAULT
+    fi
+   
+
+    # guide.def : Activate nudging if ok_guide=y set in lmdz.card
+    if [ ! X${lmdz_UserChoices_ok_guide} = X ] ; then
+	IGCM_comp_modifyDefFile nonblocker guide.def ok_guide  ${lmdz_UserChoices_ok_guide}
+    else
+	IGCM_comp_modifyDefFile nonblocker guide.def ok_guide n
+    fi
+
+
+    ## Read ByPass_hgardfou_teta option in lmdz.card --> divide teta* by 2 if [ $ByPass_hgardfou_teta = 1 ]
+    ByPass_hgardfou_teta=${lmdz_UserChoices_ByPass_hgardfou_teta}
+    if [ X"${ByPass_hgardfou_teta}" = X"y" ] ; then
+	awk '{ if ($0 ~ /^teta.*=/) {split($0,a,"=") ; print a[1]"="a[2]/2"."} else print $0}' gcm.def > gcm.def.tmp
+	IGCM_sys_Mv gcm.def.tmp gcm.def
+	echo
+	IGCM_debug_Print 1 "ByPass_hgardfou_teta : ^teta*/2 in gcm.def"
+	echo
+	cat gcm.def
+	ByPass_hgardfou_teta=n
+	IGCM_card_WriteOption ${SUBMIT_DIR}/COMP/lmdz.card UserChoices ByPass_hgardfou_teta "${ByPass_hgardfou_teta}"
+    fi
+
+    ## Read ByPass_hgardfou_mats option in lmdz.card --> purmats=y 2 if [ $ByPass_hgardfou_mats = 1 ]
+    ByPass_hgardfou_mats=${lmdz_UserChoices_ByPass_hgardfou_mats}
+    if [ X"${ByPass_hgardfou_mats}" = X"y" ] ; then
+	sed -e "s/^purmats=.*/purmats=y/" gcm.def > gcm.def.tmp
+        IGCM_sys_Mv gcm.def.tmp gcm.def
+        echo
+        IGCM_debug_Print 1 "ByPass_hgardfou_mats : purmats=y in gcm.def"
+        echo
+        cat gcm.def
+        ByPass_hgardfou_mats=n
+        IGCM_card_WriteOption ${SUBMIT_DIR}/COMP/lmdz.card UserChoices ByPass_hgardfou_mats "${ByPass_hgardfou_mats}"
+    fi
+
+    # Add include of LMDZ context in iodef.xml
+    # In iodef.xml add on next line after "COMPONENT CONTEXT"
+    #  <context id="LMDZ" src="./context_lmdz.xml"/>
+    echo '<context id="LMDZ" src="./context_lmdz.xml"/>' > add.tmp
+    if [ X"$( echo ${config_UserChoices_ExpType} | grep CMIP6 )" != "X" ] ; then
+	echo '<context id="LMDZ" src="./ping_lmdz.xml"/>' >> add.tmp
+	echo '<context id="LMDZ" src="./dr2xml_lmdz.xml"/>' >> add.tmp
+    fi
+    cp iodef.xml iodef.xml.tmp
+    sed -e "/COMPONENT CONTEXT/r add.tmp" iodef.xml.tmp > iodef.xml
+    rm iodef.xml.tmp add.tmp
+
+    #Long Name as global attribute (if LongName is not empty)
+    if [ ! "X${config_UserChoices_LongName}" = "X" ] ; then
+	listfile=$(ls file_def*lmdz.xml)
+	echo "<variable id=\"LongName\" type=\"string\">${config_UserChoices_LongName}</variable>" > add.tmp
+	for file in ${listfile}
+	do
+	    cp ${file} ${file}.tmp
+	    sed -e "/<file id/r add.tmp" \
+		${file}.tmp > ${file}
+	    rm ${file}.tmp 
+	done
+	rm add.tmp
+    fi
+            
+    IGCM_debug_PopStack "ATM_Update"
+}
+
+#-----------------------------------
+function ATM_Finalize
+{
+    IGCM_debug_PushStack "ATM_Finalize"
+
+    # Add special treatement for CARBON CYCLE
+    if [ X"${lmdz_UserChoices_CARBON_CYCLE}" = X"control" ] || [ X"${lmdz_UserChoices_CARBON_CYCLE}" = X"historical" ] ; then
+	ATM_Carbon_Finalize
+    fi
+
+    echo FINALIZE ATM !
+
+    IGCM_debug_PopStack "ATM_Finalize"
+}
+
+
+
+function ATM_Carbon_Update
+{
+    # This fuction will be called only if CARBON_CYCLE is set to control or historical in lmdz.card
+
+    IGCM_debug_PushStack "ATM_Carbon_Update"
+
+    typeset InitPeriodCo2 InitDateBeginCo2 InitDateEndCo2
+    typeset CO2SBG CO2MBG CO2LU CO2_ppm CO2_ppm_prec fCO2_ff
+    typeset PathCO2log 
+    typeset PreviousLinelog LastPeriodDateBegin LastPeriodDateEnd LastDatesPeriod LastPREFIX
+    
+    if ( ${FirstInitialize} && [ X"${config_ATM_Restart}" = X"n" ] ) ; then
+        ##--Initialization of fluxes to an undefined value at the first run
+	UndefinedValueCo2=-9999
+	InitPeriodCo2=0
+	InitDateBeginCo2=${UndefinedValueCo2}
+	InitYearCo2=$(( ${year} - 1 )) 
+	InitDateEndCo2=${InitYearCo2}1231
+	fCO2_ff=${UndefinedValueCo2} 
+	CO2SBG=${UndefinedValueCo2}
+	CO2LU=${UndefinedValueCo2}
+	CO2MBG=${UndefinedValueCo2}
+	CO2_ppm_prec=${UndefinedValueCo2}
+        # Get the initial value of atmosp. pco2 
+	CO2_ppm=${lmdz_UserChoices_co2_init}
+	
+	IGCM_sys_Cp ${SUBMIT_DIR}/co2.log.init ${SUBMIT_DIR}/co2.log
+	IGCM_sys_Chmod u+w ${SUBMIT_DIR}/co2.log
+	
+        # Save CO2 values in ExeCpuLog variable contents 5 fields
+	echo "${InitPeriodCo2} ${InitDateBeginCo2} ${InitDateEndCo2} ${CO2_ppm} ${CO2_ppm_prec} ${fCO2_ff} ${CO2MBG} ${CO2SBG} ${CO2LU}" |   \
+	    gawk '{printf("  %11d | %15s | %15s | %22.15g | %20.15g | %11.8g | %11.8g | %12.8g | %12.8g \n", \
+                              $1,$2,$3,$4,$5,$6,$7,$8,$9)}' >> ${SUBMIT_DIR}/co2.log
+	
+        # Get the path where the log file co2.log is
+	PathCO2log=${SUBMIT_DIR} 
+        # Get Previous line in co2.log
+	PreviousLinelog=$( tail -1 ${PathCO2log}/co2.log )
+	
+    else
+	
+	# NEW parameter in config.card (even for Overule all restarts, you must modify the line after this comment ):
+        # !! NEW for Carbone cycle !! Path where to find old co2.log file for restart CO2.
+	#SubmitRestartPath=
+	if ( ${FirstInitialize} && [ X"${config_ATM_Restart}" = X"y" ] ) ; then
+	    IGCM_card_DefineVariableFromOption ${SUBMIT_DIR}/config.card ATM SubmitRestartPath
+	    PathCO2log=${config_ATM_SubmitRestartPath}
+	    Date_r=$( IGCM_date_ConvertFormatToGregorian ${config_ATM_RestartDate} )
+	    PreviousLinelog=$( grep ${Date_r} ${PathCO2log}/co2.log )
+	    
+	    IGCM_sys_Cp ${SUBMIT_DIR}/co2.log.init ${SUBMIT_DIR}/co2.log
+	    IGCM_sys_Chmod u+w ${SUBMIT_DIR}/co2.log
+	    
+            # Save Last Line of control in new co2.log file
+	    InitPeriodCo2=0   
+	    InitDateBeginCo2=$( echo "${PreviousLinelog[*]}" | gawk -F '|' '{gsub(" ",""); print $2}' )
+	    InitDateEndCo2=$( echo "${PreviousLinelog[*]}" | gawk -F '|' '{gsub(" ",""); print $3}' )
+	    fCO2_ff=$( echo "${PreviousLinelog[*]}" | gawk -F '|' '{gsub(" ",""); print $6}' )
+	    CO2SBG=$( echo "${PreviousLinelog[*]}" | gawk -F '|' '{gsub(" ",""); print $8}' )
+	    CO2LU=$( echo "${PreviousLinelog[*]}" | gawk -F '|' '{gsub(" ",""); print $9}' )
+	    CO2MBG=$( echo "${PreviousLinelog[*]}" | gawk -F '|' '{gsub(" ",""); print $7}' )
+	    CO2_ppm_prec=$( echo "${PreviousLinelog[*]}" | gawk -F '|' '{gsub(" ",""); print $5}' )
+	    CO2_ppm=$( echo "${PreviousLinelog[*]}" | gawk -F '|' '{gsub(" ",""); print $4}' )
+	    
+	    echo "${InitPeriodCo2} ${InitDateBeginCo2} ${InitDateEndCo2} ${CO2_ppm} ${CO2_ppm_prec} ${fCO2_ff} ${CO2MBG} ${CO2SBG} ${CO2LU}" |   \
+		gawk '{printf("  %11d | %15s | %15s | %22.15g | %20.15g | %11.8g | %11.8g | %12.8g | %12.8g \n", \
+                              $1,$2,$3,$4,$5,$6,$7,$8,$9)}' >> ${SUBMIT_DIR}/co2.log
+	else
+           # Get restart line in co2.log
+	    PathCO2log=${SUBMIT_DIR}
+	    PreviousLinelog=$( tail -1 ${PathCO2log}/co2.log )
+           # Get the value of atmosp. pco2 in co2.log
+	    CO2_ppm=$( echo "${PreviousLinelog[*]}" | gawk -F '|' '{gsub(" ",""); print $4}' )
+	fi
+	
+    fi
+    
+    if [ ${lmdz_UserChoices_CARBON_CYCLE} = historical ] ; then
+	# Modify co2_ppm in config.def only for historical run
+	# If not historical run, keep co2_ppm value set earlier by IGCM_comp_modifyDefFile
+	IGCM_comp_modifyDefFile force config.def co2_ppm     ${CO2_ppm}
+    fi
+    IGCM_debug_PopStack "ATM_Carbon_Update"
+}
+
+
+function ATM_Carbon_Finalize
+{
+    # This fuction will be called only if CARBON_CYCLE is set to control or historical in lmdz.card
+
+    IGCM_debug_PushStack "ATM_Carbon_Finalize"
+
+    typeset CO2SBG_3V CO2SBG CO2MBG CO2SRF CO2LU CO2_ppm CO2_ppm_prec fCO2_ff
+    
+	# Fossil fuel emission
+    if [ ${lmdz_UserChoices_CARBON_CYCLE} = control ] ; then
+            # For Control, no fossil fuel emission :
+	fCO2_ff=0
+	echo "Fossil Fuel for control run  :" ${fCO2_ff}
+    else
+            # For historical, get the fossile fuel file :
+	fCO2_ff=$( gawk "{if (match(\$0,\"${year}\ *${month}\")) {print \$3}}" ${SUBMIT_DIR}/PARAM/CMIP5_gridcar_CO2_emissions_fossil_fuel_Andres_1751-2007_monthly_SC.txt )
+	echo "Fossil Fuel for historical run  :" ${fCO2_ff}
+    fi
+    
+        # Get the value of ocean carbon flux
+    CO2MBG=$( ${SUBMIT_DIR}/COMP/lmdz_analyse_pisces_out.awk ocean.output )
+    CO2MBG=$( echo ${CO2MBG} | sed -e "s/ *//" )
+    echo "Ocean carbon flux  :" ${CO2MBG}
+    
+        # Get the value of land fluxes
+    set +A CO2SBG_3V -- $( ${SUBMIT_DIR}/COMP/lmdz_analyse_stomate_out.awk out_orchidee_0000 )
+    CO2SRF=$( echo ${CO2SBG_3V[0]} | sed -e "s/ *//" )
+    CO2LU=$( echo ${CO2SBG_3V[1]} | sed -e "s/ *//" )
+    CO2SBG=$( echo ${CO2SBG_3V[2]} | sed -e "s/ *//" )
+    echo "Land carbon flux (NEP)         :" ${CO2SRF}
+    echo "LU flux          (FLUC)        :" ${CO2LU}
+    echo "Total Land carbon flux (NBP)   :" ${CO2SBG}
+    
+        # Previous CO2
+    CO2_ppm_prec=$( echo "${PreviousLinelog[*]}" | gawk -F '|' '{gsub(" ",""); print $4}' )
+    echo "Previous CO2  :" ${CO2_ppm_prec}
+    
+        # Formula
+    CO2_ppm=$( echo "${CO2_ppm_prec} + (${fCO2_ff} + ${CO2MBG} + ${CO2SBG}) / 2.12" | bc -l )
+    echo "New CO2  :" ${CO2_ppm}
+    
+        # Save CO2 values in ExeCpuLog variable contents 5 fields
+    echo "${CumulPeriod} ${PeriodDateBegin} ${PeriodDateEnd} ${CO2_ppm} ${CO2_ppm_prec} ${fCO2_ff} ${CO2MBG} ${CO2SBG} ${CO2LU}" |   \
+	gawk '{printf("  %11d | %15s | %15s | %22.15g | %20.15g | %11.8g | %11.8g | %12.8g | %12.8g \n", \
+                           $1,$2,$3,$4,$5,$6,$7,$8,$9)}' >> ${SUBMIT_DIR}/co2.log
+    
+    IGCM_debug_PopStack "ATM_Carbon_Finalize"
+}
Index: CMIP6/DAMIP/CM61-LR-hist-stratO3-03.2150/DRIVER/oasis.driver
===================================================================
--- CMIP6/DAMIP/CM61-LR-hist-stratO3-03.2150/DRIVER/oasis.driver	(revision 4131)
+++ CMIP6/DAMIP/CM61-LR-hist-stratO3-03.2150/DRIVER/oasis.driver	(revision 4131)
@@ -0,0 +1,169 @@
+#!/bin/ksh
+#-----------------------------------
+CPL_Initialize ()
+{
+    IGCM_debug_PushStack "CPL_Initialize"
+ 
+    echo INITIALIZE CPL !!!
+
+# Local function to find parameters in LMDZ .def files
+    lmdzgrep () {
+        grep $1 $2 |grep -v "#" | awk "-F=" '{print $2}' | awk "-F " '{print $1}'
+    }
+
+    #RESOL_CPL=$( echo $RESOL | awk "-F-" '{print $1}' )
+    RESOL_CPL=${RESOL_OCE}x${RESOL_ATM}
+    IGCM_debug_Print 1 "RESOL_CPL      : ${RESOL_CPL}"
+
+    CPL_OkDay="n"
+    CPL_OkMonth="n"
+
+    for CPL_Frequency in ${config_CPL_WriteFrequency} ; do
+	case ${CPL_Frequency} in
+	    *D|*d) CPL_OkDay="y"   ;;
+	    *M)    CPL_OkMonth="y" ;;
+	esac
+    done
+
+    # Initialisation required for AddNoise done during one Period
+    Test_AddNoise_First_Only=y
+
+    IGCM_debug_PopStack "CPL_Initialize"
+
+}
+
+#-----------------------------------
+CPL_Update ()
+{
+    IGCM_debug_PushStack "CPL_Update"
+
+    ############ Update Time and Counters ##############
+    ##-- Calcul de la duree du job (en secondes)
+    (( D_JOB_SEC = 3600 * 24 * PeriodLengthInDays ))
+
+    ############ Update Other Parameters  ##############
+    ## Read Output_mode option in oasis.card --> Put "y" to have coupling variables in ouptut files
+    CPL_OutputMode="n"
+    IGCM_card_DefineVariableFromOption ${SUBMIT_DIR}/COMP/oasis.card UserChoices OutputMode 
+    eval CPL_OutputMode=\${oasis_UserChoices_OutputMode} > /dev/null 2>&1
+    echo CPL_OutputMode = ${CPL_OutputMode}
+    CPL_OutputVar='EXPORTED'
+    if [ ${CPL_OutputMode} = y ] ; then
+	CPL_OutputVar='EXPOUT'
+    fi
+
+    FreqCoupling=${oasis_UserChoices_FreqCoupling:-86400}
+    FreqCouplingRoffCalv=${oasis_UserChoices_FreqCouplingRoffCalv:-86400}
+
+    ## Calculate lag for transfer of fields from atmosphere -> ocean.
+    ## LagAtm="1day in sec"/day_step * iphysiq/nsplit_phys
+    ## First get day_step, iphyisq and nsplit_phys from LMDZ parameter files
+    day_step=$(    lmdzgrep day_step gcm.def )
+    iphysiq=$(     lmdzgrep iphysiq gcm.def )
+    nsplit_phys=$( lmdzgrep nsplit_phys physiq.def )
+
+    IGCM_debug_Print 3 "Parametre de calcul Lag LMDZ recuperes " ${day_step} ${iphysiq} ${nsplit_phys}
+
+    [[ ${nsplit_phys} -eq 0 || "X${nsplit_phys}" = "X" ]] && nsplit_phys=1
+
+    IGCM_debug_Print 3 "Parametre de calcul Lag LMDZ mis a jour " ${day_step} ${iphysiq} ${nsplit_phys}
+                                                              
+    (( LagAtm = 86400 * iphysiq / day_step / nsplit_phys ))
+    (( LagAtmRoffCalv = $FreqCoupling + $LagAtm ))
+    (( LagOce = 86400 / OPA_NPDT_DAY ))
+
+    IGCM_debug_Print 1 "OPA_NPDT_DAY : ${OPA_NPDT_DAY}"
+    IGCM_debug_Print 1 "LagAtm        : ${LagAtm}"
+    IGCM_debug_Print 1 "LagAtmRoffCalv : ${LagAtmRoffCalv}"
+    IGCM_debug_Print 1 "LagOce        : ${LagOce}"
+
+    ## Use of Lucia ##
+    lucia_ok=""
+    if [ ${oasis_UserChoices_Lucia} = y ] ; then
+	lucia_ok="-1"
+    fi
+    
+    ############ Update Parameter Files   ##############
+    sed -e "s/<total_time>/${D_JOB_SEC}/" \
+	-e "s/<lucia_ok>/${lucia_ok}/" \
+	-e "s/<output_mode>/${CPL_OutputVar}/g" \
+	-e "s/<freq_coupling>/${FreqCoupling}/g" \
+	-e "s/<freq_coupling_roff_calv>/${FreqCouplingRoffCalv}/g" \
+	-e "s/<lag_atm>/${LagAtm}/g" \
+	-e "s/<lag_atm_roff_calv>/${LagAtmRoffCalv}/g" \
+	-e "s/<lag_oce>/${LagOce}/g" \
+	namcouple > namcouple.tmp
+    IGCM_sys_Mv namcouple.tmp namcouple
+    # For IPSLCM6 and use of OASIS-MCT
+    if [ ${CumulPeriod} -eq 1 ]; then
+	ncrename -v OIceFrac,OIceFrc sstoc.nc > /dev/null 2>&1
+    fi
+    # For use of XIOS
+    IGCM_comp_modifyXmlFile force iodef.xml using_oasis NONE true
+
+    if [ X"${Test_AddNoise_First_Only}" = X"y" ]; then
+
+    Test_AddNoise_First_Only=n
+
+    # AddNoise if required but only for one Period
+
+    # Read ByPass_addnoise_sst option in oasis.card --> apply addnoise for sst in CPL restart file if [ $ByPass_addnoise_sst = y ]
+    ByPass_addnoise_sst=${oasis_UserChoices_ByPass_addnoise_sst}
+    if [ X"${ByPass_addnoise_sst}" = X"y" ] ; then
+      
+      ByPass_PerturbExe=${oasis_UserChoices_ByPass_PerturbExe}
+      ByPass_FileOut=${oasis_UserChoices_ByPass_FileOut}
+      ByPass_PerturbVar=${oasis_UserChoices_ByPass_PerturbVar}
+      ByPass_PerturbAmp=${oasis_UserChoices_ByPass_PerturbAmp}
+
+      IGCM_sys_Chmod 644 ${RUN_DIR}/${ByPass_FileOut}.nc
+      IGCM_debug_Print 1 "${ByPass_PerturbExe} ${RUN_DIR}/${ByPass_FileOut}.nc ${ByPass_PerturbVar} ${ByPass_PerturbAmp}"
+
+      ${ByPass_PerturbExe} ${RUN_DIR}/${ByPass_FileOut}.nc ${ByPass_PerturbVar} ${ByPass_PerturbAmp} 
+      if [ $? -ne 0 ] ; then
+        IGCM_debug_Exit "Error with $( basename ${ByPass_PerturbExe} )"
+        IGCM_debug_Verif_Exit
+      fi
+
+      echo
+      IGCM_debug_Print 1 "ByPass_addnoise_sst : applied addnoise for sst in CPL restart file"
+      echo
+      ByPass_addnoise_sst=n
+      # necessary to reset ByPass in next Period during the same Job (PeriodNb<>1)
+      export oasis_UserChoicesByPass_addnoise_sst=n
+      IGCM_card_WriteOption ${SUBMIT_DIR}/COMP/oasis.card UserChoices ByPass_addnoise_sst "${ByPass_addnoise_sst}"
+    fi
+
+    fi
+
+    IGCM_debug_PopStack "CPL_Update"
+}
+
+#-----------------------------------
+CPL_Finalize ()
+{
+    IGCM_debug_PushStack "CPL_Finalize"
+
+    if [ "${CPL_OutputMode}" = "y" ] ; then
+
+        [[ ${CPL_OkDay}   = "y" ]] && date >TEMPO_1D_cpl_atm.nc
+        [[ ${CPL_OkMonth} = "y" ]] && date >TEMPO_1M_cpl_atm.nc
+        [[ ${CPL_OkDay}   = "y" ]] && date >TEMPO_1D_cpl_oce.nc
+        [[ ${CPL_OkMonth} = "y" ]] && date >TEMPO_1M_cpl_oce.nc
+
+    fi
+
+    ## Use of Lucia ##
+    if [ ${oasis_UserChoices_Lucia} = y ] ; then
+	echo "Use of LUCIA"
+    #   To be changed 
+    #   On Curie
+    #   /ccc/scratch/cont003/dsm/p86caub/LUCIA/lucia
+    #   On Ada
+    #   /linkhome/rech/psl/rpsl035/LUCIA/lucia
+    fi
+
+    echo FINALIZE CPL !!!
+
+    IGCM_debug_PopStack "CPL_Finalize"
+}
Index: CMIP6/DAMIP/CM61-LR-hist-stratO3-03.2150/DRIVER/opa9.driver
===================================================================
--- CMIP6/DAMIP/CM61-LR-hist-stratO3-03.2150/DRIVER/opa9.driver	(revision 4131)
+++ CMIP6/DAMIP/CM61-LR-hist-stratO3-03.2150/DRIVER/opa9.driver	(revision 4131)
@@ -0,0 +1,278 @@
+#!/bin/ksh
+#-----------------------------------------------------------------
+function OCE_Initialize
+{
+    IGCM_debug_PushStack "OCE_Initialize"
+
+    JOB_NAME=${config_UserChoices_JobName}
+
+    RESOL_OCE_ICE=$( echo ${RESOL} | awk "-Fx" '{print $1}' )
+    case ${RESOL_OCE_ICE} in
+	( *LIM2* ) SEAICE_MODEL=LIM2 ; 	LIM_VERSION=2 ;;
+	( *LIM3* ) SEAICE_MODEL=LIM3 ; 	LIM_VERSION=3 ;;
+	( *CICE* ) SEAICE_MODEL=CICE                  ;;
+	( *      ) SEAICE_MODEL=UNKNOWN               ;;
+    esac
+    RESOL_OCE=$( echo ${RESOL_OCE_ICE} | sed "s/${SEAICE_MODEL}//" )
+
+    IGCM_debug_Print 1 "RESOL          : ${RESOL}"
+    IGCM_debug_Print 1 "RESOL_OCE_ICE  : ${RESOL_OCE_ICE}"
+    IGCM_debug_Print 1 "SEAICE_MODEL   : ${SEAICE_MODEL}"
+    IGCM_debug_Print 1 "LIM_VERSION    : ${LIM_VERSION}"
+    IGCM_debug_Print 1 "RESOL_OCE      : ${RESOL_OCE}"
+
+    # Local function to find namelists parameters
+    #supergrep () { grep "^ *$1 *=" $2 | sed -e "s% *\!.*%%" ; }
+    supergrep () { grep "^ *$1 *=" $2 | sed -e "s% *\!.*%%" -e "s%^ *$1 *=%%" ; }
+    ##--Variables used by OPA --
+    NAMELIST_OPA_CFG=${SUBMIT_DIR}/PARAM/namelist_${RESOL_OCE}_cfg
+    IGCM_debug_Print 1 "namelist_cfg : ${NAMELIST_OPA_CFG}"
+    if [ ! -r ${NAMELIST_OPA_CFG} ] ; then
+        IGCM_debug_Exit "${NAMELIST_OPA_CFG} not found"
+	IGCM_debug_Verif_Exit
+    fi
+    OPA_RDT=$(       supergrep rn_rdt        ${NAMELIST_OPA_CFG} )
+    OPA_NN_FSBC=$(   supergrep nn_fsbc       ${NAMELIST_OPA_CFG} )
+    #
+    # OPA_RDT=$(       supergrep rn_rdt        namelist_cfg )
+    # OPA_NN_FSBC=$(   supergrep nn_fsbc       namelist_cfg )
+    (( OPA_NPDT_DAY   =  86400 / OPA_RDT        ))
+    (( OPA_NPDT_YEAR  =  OPA_NPDT_DAY * 365     ))
+    (( OPA_RDT_SBC    =  OPA_RDT * OPA_NN_FSBC ))
+ 
+    # Period Length In Days between DateBegin and first day of calendar 0001 01 01
+    # /!\ Needed by OPA namelist to compute file names /!\
+    (( DaysSinceJC = $( IGCM_date_DaysSinceJC ${DateBegin} ) + 1 ))
+
+    IGCM_debug_Print 1 " "
+    IGCM_debug_Print 1 "OPA_RDT        ${OPA_RDT}"
+    IGCM_debug_Print 1 "OPA_NN_FSBC    ${OPA_NN_FSBC}"
+    IGCM_debug_Print 1 "OPA_RDT_SBC    ${OPA_RDT_SBC}"
+    IGCM_debug_Print 1 "OPA_NPDT_DAY   ${OPA_NPDT_DAY}"
+    IGCM_debug_Print 1 "OPA_NPDT_YEAR  ${OPA_NPDT_YEAR}"
+    IGCM_debug_Print 1 "DaysSinceJC    ${DaysSinceJC}"
+
+    ## Check that nn_fsbc is correct compare to coupling frequency
+    FreqCoupling=${oasis_UserChoices_FreqCoupling:-86400}
+    
+    ## This informations are used for diaptr, trends and diagap files
+    ## only the first frequency is used for this files
+    
+    IGCM_debug_Print 1 "FreqCoupling    ${FreqCoupling}"
+    IGCM_debug_Print 1 "OPA_NN_FSBC    ${OPA_NN_FSBC}"
+    IGCM_debug_Print 1 "OPA_RDT        ${OPA_RDT}"
+    IGCM_debug_Print 1 "OPA_RDT_SBC    ${OPA_RDT_SBC}"
+    
+    if [[ ${OPA_RDT_SBC} -gt ${FreqCoupling} ]] ; then
+	IGCM_debug_Exit "OPA_RDT_SBC=${OPA_RDT_SBC} is greater than FreqCoupling=${FreqCoupling}"
+     	IGCM_debug_Verif_Exit
+    fi
+
+    IGCM_debug_PopStack "OCE_Initialize"
+   
+}
+
+#-----------------------------------------------------------------
+function OCE_Update
+{
+    IGCM_debug_PushStack "OCE_Update"
+  
+    ##--Write Frequency for iomput
+    ## Differents frequencies are allowed for OCE files
+
+    V1D_ENABLE=".FALSE."
+    V5D_ENABLE=".FALSE."
+    V1M_ENABLE=".FALSE."
+    V1Y_ENABLE=".FALSE."
+
+    for frequency in ${config_OCE_WriteFrequency} ; do
+        case ${frequency} in
+            ( 1D|1d ) V1D_ENABLE=".TRUE." ;;
+            ( 5D|5d ) V5D_ENABLE=".TRUE." ;;
+            ( 1M|1m ) V1M_ENABLE=".TRUE." ;;
+            ( *[yY] ) V1Y_ENABLE=".TRUE." ;;
+        esac
+    done
+
+    # Period Length In Days between DateBegin and first day of calendar 0001 01 01
+    # Needed by OPA namelist to compute correct file names 
+    (( PeriodDaysSinceJC =  $( IGCM_date_DaysSinceJC ${PeriodDateBegin} ) + 1  ))
+
+    ##-- Number of time steps updated : the first, the last and the number of time steps
+    (( OPA_NIT000 = ( PeriodDaysSinceJC - DaysSinceJC ) * OPA_NPDT_DAY + 1 ))
+    (( OPA_NPDT   = PeriodLengthInDays * OPA_NPDT_DAY ))
+    (( OPA_NITEND = OPA_NIT000 + OPA_NPDT - 1))
+
+    ##-- We force one restart file at the end of the trunk
+    OPA_NSTOCK="${OPA_NITEND}"
+
+
+    ##-- Additionnal Restart Option to force reproducibility ; force kt to kt red in restart file
+    ## ${opa9_UserChoices_Reproducibility_after_restart}
+
+    IGCM_card_DefineVariableFromOption ${SUBMIT_DIR}/COMP/opa9.card UserChoices Reproducibility_after_restart
+
+   ##-- Restart configuration
+    if ( [ "${opa9_UserChoices_Reproducibility_after_restart}" = "y" ] ) ; then
+      OPA_LRSTAR=.TRUE.
+      OPA_NRSTDT=2
+      #echo "OPA RESTART"
+      IGCM_debug_Print 1 'WARNING : dangerous option for NEMO opa9 pisces lim3'
+      IGCM_debug_Print 1 'Reproducibility_after_Restart forced ie kt forced to kt red in restart file : ' ${opa9_UserChoices_Reproducibility_after_restart}
+
+    elif ( [ "${CumulPeriod}" -eq 1 ] && [ "${config_OCE_Restart}" = "n" ] ) ; then
+      OPA_LRSTAR=.FALSE.
+      OPA_NRSTDT=0
+      #echo "NO OPA RESTART"
+    elif ( [ "${CumulPeriod}" -eq 1 ] && [ "${config_OCE_Restart}" = "y" ] ) ; then
+      OPA_LRSTAR=.TRUE.
+      OPA_NRSTDT=0
+      #echo "OPA RESTART"
+    else
+      OPA_LRSTAR=.TRUE.
+      OPA_NRSTDT=2
+      #echo "OPA RESTART"
+    fi
+
+    if ( [ "${CumulPeriod}" -eq 1 ] && [ "${opa9_UserChoices_Restart_TS_only}" = "y" ] ) ; then
+      OPA_LRSTAR_TS=.TRUE.
+    else
+      OPA_LRSTAR_TS=.FALSE.
+    fi
+
+    ##-- Meshmask option. Forced only once.
+    IGCM_card_DefineVariableFromOption ${SUBMIT_DIR}/COMP/opa9.card UserChoices mesh_mask
+
+    OPA_NMSH=0
+    if [ "${opa9_UserChoices_mesh_mask}" = "y" ]; then
+        OPA_NMSH=1
+        IGCM_card_WriteOption ${SUBMIT_DIR}/COMP/opa9.card UserChoices mesh_mask "n"
+    fi
+
+    # nleapy configuration
+    case ${config_UserChoices_CalendarType} in
+        ( leap|gregorian) OPA_NLEAPY=1  ;;
+        ( noleap        ) OPA_NLEAPY=0  ;;
+        ( 360d          ) OPA_NLEAPY=30 ;;
+        ( *             ) OPA_NLEAPY=30 ;;
+    esac
+
+    if ( [ "${opa9_UserChoices_Reproducibility_after_restart}" = "y" ] ) ; then
+      ##-- choose the right restart file
+      NEMO_RESTART_FILE=restartopa.nc
+      [ -f restartopa_0000.nc ] && NEMO_RESTART_FILE=restartopa_0000.nc
+      ##-- Getting from restart file the last time step of the run at which we want to re-start
+      NEMO_KT_FROM_RESTART=$(ncdump -v kt ${NEMO_RESTART_FILE}|grep 'kt ='|awk '{print $3}' )
+
+      if ( [ "${CumulPeriod}" -eq 1 ] ) ; then
+        ## Force the date in the restart file to be the last day before the begining of the new run
+        dateendprevious=$( IGCM_date_AddDaysToGregorianDate ${DateBegin} -1 )
+        IGCM_debug_Print 1 "Previous Date  ${dateendprevious}"
+        IGCM_debug_Print 1 "cmd done to modify NEMO restartfile:   ncap2 -s ndastp=${dateendprevious} ${NEMO_RESTART_FILE}  tmp.nc"
+	if [ -f restartopa_0000.nc ] ; then
+           typeset -Z4 ncpu=0
+           while [ $ncpu -lt ${OCE_PROC_MPI} ] ; do
+              ncap2 -s "ndastp=${dateendprevious}" restartopa_${ncpu}.nc  tmp.nc
+              mv tmp.nc restartopa_${ncpu}.nc
+              (( ncpu = ncpu + 1 ))
+           done
+        else
+           ncap2 -s "ndastp=${dateendprevious}" ${NEMO_RESTART_FILE}  tmp.nc
+           mv tmp.nc ${NEMO_RESTART_FILE}
+        fi
+        ##-- Getting from restart file the "new" restart date of run at which we want to re-start
+        NEMO_NDASTP_FROM_RESTART=$(ncdump -v ndastp ${NEMO_RESTART_FILE}|grep 'ndastp ='|awk '{print $3}' )
+        IGCM_debug_Print 1 "NEMO_NDASTP (from Restart) for 1st Period       : ${NEMO_NDASTP_FROM_RESTART}"
+
+      fi
+
+      (( NEMO_NIT000 = NEMO_KT_FROM_RESTART + 1 ))
+      (( NEMO_NITEND = NEMO_KT_FROM_RESTART + OPA_NITEND - OPA_NIT000 + 1 ))
+      IGCM_debug_Print 1 "NEMO_NIT000 (from Restart)        : ${NEMO_NIT000}"
+      IGCM_debug_Print 1 "NEMO_NITEND (from Restart + ... ) : ${NEMO_NITEND}"
+      ##-- We force one restart file at the end of the trunk
+      OPA_NSTOCK="${NEMO_NITEND}"
+      OPA_NIT000="${NEMO_NIT000}"
+      OPA_NITEND="${NEMO_NITEND}"
+    fi
+
+    typeset -r PRECIS=8
+    NEMO_END=$( echo $( awk "BEGIN { printf \"%0${PRECIS}d\",${OPA_NITEND} }" ) ) 
+
+    IGCM_comp_modifyNamelist blocker    namelist_cfg cn_exp       ${config_UserChoices_JobName}
+    IGCM_comp_modifyNamelist blocker    namelist_cfg nn_it000     ${OPA_NIT000}
+    IGCM_comp_modifyNamelist blocker    namelist_cfg nn_itend     ${OPA_NITEND}
+    IGCM_comp_modifyNamelist blocker    namelist_cfg ln_rstart    ${OPA_LRSTAR}
+    IGCM_comp_modifyNamelist blocker    namelist_cfg ln_rstart_ts ${OPA_LRSTAR_TS}
+    IGCM_comp_modifyNamelist blocker    namelist_cfg nn_stock     ${OPA_NSTOCK}
+    IGCM_comp_modifyNamelist blocker    namelist_cfg nn_rstctl    ${OPA_NRSTDT}
+    IGCM_comp_modifyNamelist blocker    namelist_cfg nn_date0     ${PeriodDateBegin}
+    IGCM_comp_modifyNamelist nonblocker namelist_cfg nn_msh       ${OPA_NMSH}
+    IGCM_comp_modifyNamelist nonblocker namelist_cfg nn_rnf_depth_file  ${OPA_NMSH}
+    IGCM_comp_modifyNamelist blocker    namelist_cfg nn_leapy     ${OPA_NLEAPY}
+    
+    # Update iodef.xml
+
+    IGCM_debug_Print 1 'Informations into iodef.xml : V1D_ENABLE V5D_ENABLE V1M_ENABLE V1Y_ENABLE '
+    IGCM_debug_Print 1 ${V1D_ENABLE}  ${V5D_ENABLE} ${V1M_ENABLE} ${V1Y_ENABLE}
+
+    IGCM_comp_modifyXmlFile nonblocker file_def_nemo-opa.xml 1d_opa enabled ${V1D_ENABLE}
+    IGCM_comp_modifyXmlFile nonblocker file_def_nemo-opa.xml 5d_opa enabled ${V5D_ENABLE}
+    IGCM_comp_modifyXmlFile nonblocker file_def_nemo-opa.xml 1m_opa enabled ${V1M_ENABLE}
+    IGCM_comp_modifyXmlFile nonblocker file_def_nemo-opa.xml 1y_opa enabled ${V1Y_ENABLE}
+
+    IGCM_comp_modifyXmlFile nonblocker file_def_nemo-opa.xml 1d_opa output_level ${opa9_UserChoices_OutputLevel}
+    IGCM_comp_modifyXmlFile nonblocker file_def_nemo-opa.xml 5d_opa output_level ${opa9_UserChoices_OutputLevel}
+    IGCM_comp_modifyXmlFile nonblocker file_def_nemo-opa.xml 1m_opa output_level ${opa9_UserChoices_OutputLevel}
+    IGCM_comp_modifyXmlFile nonblocker file_def_nemo-opa.xml 1y_opa output_level ${opa9_UserChoices_OutputLevel}
+
+
+    IGCM_comp_modifyXmlFile force context_nemo.xml ref_year NONE ${InitYear} 
+	
+ 
+    # for MPP and switch to different number of procs for NEMO.  We need to suppres restartopa the second period, if restartopa_0000 exist
+    # same thing for restart_trc and restart_ice_in
+
+    for restartfilenemo in restartopa restart_trc restart_ice_in ; do
+      [ -f ${restartfilenemo}.nc ] && [ -f ${restartfilenemo}_0000.nc ] && IGCM_sys_Rm -f ${restartfilenemo}.nc
+    done
+
+    # Add include of nemo context in iodef.xml
+    # In iodef.xml add on next line after "COMPONENT CONTEXT"
+    #  <context id="nemo" src="./context_nemo.xml"/>
+    echo '<context id="nemo" src="./context_nemo.xml"/>' > add.tmp
+    if [ X"$( echo ${config_UserChoices_ExpType} | grep CMIP6 )" != "X" ] ; then
+	echo '<context id="nemo" src="./ping_nemo.xml"/>' >> add.tmp
+	echo '<context id="nemo" src="./dr2xml_opa9.xml"/>' >> add.tmp
+    fi
+    cp iodef.xml iodef.xml.tmp
+    sed -e "/COMPONENT CONTEXT/r add.tmp" \
+        iodef.xml.tmp > iodef.xml
+    rm iodef.xml.tmp add.tmp
+
+    #Long Name as global attribute (if LongName is not empty)
+    if [ ! "X${config_UserChoices_LongName}" = "X" ] ; then
+	listfile=$(ls file_def_nemo*.xml)
+	echo "<variable id=\"LongName\" type=\"string\">${config_UserChoices_LongName}</variable>" > add.tmp
+	for file in ${listfile}
+	do
+	    cp ${file} ${file}.tmp
+	    sed -e "/<file id/r add.tmp" \
+		${file}.tmp > ${file}
+	    rm ${file}.tmp 
+	done 
+	rm add.tmp
+    fi
+
+    IGCM_debug_PopStack "OCE_Update"
+}
+
+#-----------------------------------
+function OCE_Finalize
+{
+    IGCM_debug_PushStack "OCE_Finalize"
+
+    IGCM_debug_Print 1 FINALIZE OCE !!!
+
+    IGCM_debug_PopStack "OCE_Finalize"
+}
Index: CMIP6/DAMIP/CM61-LR-hist-stratO3-03.2150/DRIVER/orchidee.driver
===================================================================
--- CMIP6/DAMIP/CM61-LR-hist-stratO3-03.2150/DRIVER/orchidee.driver	(revision 4131)
+++ CMIP6/DAMIP/CM61-LR-hist-stratO3-03.2150/DRIVER/orchidee.driver	(revision 4131)
@@ -0,0 +1,168 @@
+#!/bin/ksh
+## Driver for the component SRF corresponding to the sechiba part of ORCHIDEE
+#-----------------------------------------------------------------
+function SRF_Initialize
+{
+    IGCM_debug_PushStack "SRF_Initialize"
+
+    ##- Define variable DefSuffix set in orchidee.card
+    ##  This variable is used in orchidee.card to choose
+    ##  parameter file(orchidee.def_DefSuffix).
+    if [ ! X${orchidee_UserChoices_DefSuffix} = X ] ; then
+        DefSuffix=${orchidee_UserChoices_DefSuffix}
+    else
+        DefSuffix=Choi
+    fi
+
+    IGCM_debug_PopStack "SRF_Initialize"
+}
+
+#-----------------------------------------------------------------
+function SRF_Update
+{
+    IGCM_debug_PushStack "SRF_Update"
+
+    ## 1. Modifications in orchidee.def parameter file
+
+    # Activate STOMATE if the compontent SBG=stomate is set in config.card
+    if [ X${config_ListOfComponents_SBG} = Xstomate ] ; then
+	# Activate stomate in orchidee.def
+        IGCM_comp_modifyDefFile blocker orchidee.def STOMATE_OK_STOMATE y
+    else
+	# Deactivate stomate in orchidee.def
+        IGCM_comp_modifyDefFile blocker orchidee.def STOMATE_OK_STOMATE n
+	# Deactivate output files for stomate
+	IGCM_comp_modifyXmlFile nonblocker file_def_orchidee.xml stomate1 enabled .FALSE.
+	IGCM_comp_modifyXmlFile nonblocker file_def_orchidee.xml stomate1 output_level 0
+	IGCM_comp_modifyXmlFile nonblocker file_def_orchidee.xml stomate1 output_freq 1mo
+        IGCM_comp_modifyXmlFile nonblocker file_def_orchidee.xml stomate2 enabled .FALSE.
+	IGCM_comp_modifyXmlFile nonblocker file_def_orchidee.xml stomate2 output_level 0
+	IGCM_comp_modifyXmlFile nonblocker file_def_orchidee.xml stomate2 output_freq 1mo
+    fi
+
+    # Define in orchidee.def if restart file should be used
+    if ( [ ${CumulPeriod} -ne 1 ] || [ "${config_SRF_Restart}" != "n" ] ) ; then
+        IGCM_comp_modifyDefFile blocker orchidee.def SECHIBA_restart_in sechiba_rest_in.nc
+    else
+        IGCM_comp_modifyDefFile blocker orchidee.def SECHIBA_restart_in NONE
+    fi
+
+    # Set VEGET_UPDATE=1Y in orchidee.def if VEGET_UPDATE_at_start=y in orchidee.card and if it is the first cumul periond (start of new simulation)
+    if [ X${orchidee_UserChoices_VEGET_UPDATE_at_start} = Xy ] && [ ${CumulPeriod} -eq 1 ] ; then
+        IGCM_comp_modifyDefFile nonblocker orchidee.def VEGET_UPDATE   1Y
+    fi
+
+    # Modify in orchidee.def VEGET_UPDATE if it is set in orchidee.card section UserChoices
+    # Note: if the variable has been set by VEGET_UPDATE_at_start, this section will not overwrite it.
+    if [ ! X${orchidee_UserChoices_VEGET_UPDATE} = X ] ; then
+        IGCM_comp_modifyDefFile nonblocker orchidee.def VEGET_UPDATE   ${orchidee_UserChoices_VEGET_UPDATE}
+    else
+        IGCM_comp_modifyDefFile nonblocker orchidee.def VEGET_UPDATE 0Y
+    fi
+
+    # Set LAI_MAP in orchidee.def acording to value set in orchidee.card section UserChoices
+    # If LAI_MAP is not definded in orchidee.card, set default value n
+    # Note: this option is only read by ORCHIDEE if starting without restart files
+    if [ ! X${orchidee_UserChoices_LAI_MAP} = X ] ; then
+        IGCM_comp_modifyDefFile nonblocker orchidee.def LAI_MAP   ${orchidee_UserChoices_LAI_MAP}
+    else
+        IGCM_comp_modifyDefFile nonblocker orchidee.def LAI_MAP   DEFAULT
+    fi
+
+    # Set DO_WOOD_HARVEST in orchidee.def acording to value set in orchidee.card section UserChoices
+    # If DO_WOOD_HARVEST is not definded in orchidee.card, set default value y
+    if [ ! X${orchidee_UserChoices_DO_WOOD_HARVEST} = X ] ; then
+        IGCM_comp_modifyDefFile nonblocker orchidee.def DO_WOOD_HARVEST   ${orchidee_UserChoices_DO_WOOD_HARVEST}
+    else
+        IGCM_comp_modifyDefFile nonblocker orchidee.def DO_WOOD_HARVEST   DEFAULT
+    fi
+
+    # Activate creation of river description file only for the first period
+    if [ ${CumulPeriod} -eq 1 ] ; then
+        IGCM_comp_modifyDefFile nonblocker orchidee.def RIVER_DESC y
+    else
+        IGCM_comp_modifyDefFile nonblocker orchidee.def RIVER_DESC n
+    fi
+
+
+    ## 2. Mangement of output and modifications of related xml files
+    # Modify file_def_orchidee.xml file using settings from orchidee.card
+    # We here suppose that for each file, in orchidee.card UserChoices section, if the parameter 
+    # output_level_filename is set, then also output_freq_filename must be set. The existance of output_freq_filename will not be checked. 
+    # If output_level_filename=NONE or if it is not set, the corresponding file will be deactivated.
+    # Settings in config.card WriteFrequency are not used any more.
+    
+    if [ X${orchidee_UserChoices_output_level_sechiba_history} = X ] || [ X${orchidee_UserChoices_output_level_sechiba_history} = XNONE ] ; then
+	# output_level_sechiba_history is not set in orchidee.card or it is set to NONE.
+	# Deactivate the file.
+	IGCM_comp_modifyXmlFile nonblocker file_def_orchidee.xml sechiba1 enabled .FALSE.
+	IGCM_comp_modifyXmlFile nonblocker file_def_orchidee.xml sechiba1 output_level 0
+	IGCM_comp_modifyXmlFile nonblocker file_def_orchidee.xml sechiba1 output_freq 1mo
+    else
+	IGCM_comp_modifyXmlFile nonblocker file_def_orchidee.xml sechiba1 enabled      .TRUE.
+	IGCM_comp_modifyXmlFile nonblocker file_def_orchidee.xml sechiba1 output_level ${orchidee_UserChoices_output_level_sechiba_history}
+	IGCM_comp_modifyXmlFile nonblocker file_def_orchidee.xml sechiba1 output_freq  ${orchidee_UserChoices_output_freq_sechiba_history}
+    fi
+    
+    if [ X${orchidee_UserChoices_output_level_sechiba_out_2} = X ] || [ X${orchidee_UserChoices_output_level_sechiba_out_2} = XNONE ] ; then
+	# output_level_sechiba_out_2 is not set in orchidee.card or it is set to NONE.
+	# Deactivate the file.
+	IGCM_comp_modifyXmlFile nonblocker file_def_orchidee.xml sechiba2 enabled .FALSE.
+	IGCM_comp_modifyXmlFile nonblocker file_def_orchidee.xml sechiba2 output_level 0
+	IGCM_comp_modifyXmlFile nonblocker file_def_orchidee.xml sechiba2 output_freq 1mo
+    else
+	IGCM_comp_modifyXmlFile nonblocker file_def_orchidee.xml sechiba2 enabled      .TRUE.
+	IGCM_comp_modifyXmlFile nonblocker file_def_orchidee.xml sechiba2 output_level ${orchidee_UserChoices_output_level_sechiba_out_2}
+	IGCM_comp_modifyXmlFile nonblocker file_def_orchidee.xml sechiba2 output_freq  ${orchidee_UserChoices_output_freq_sechiba_out_2}
+    fi
+    
+    if [ X${orchidee_UserChoices_output_level_sechiba_history_4dim} = X ] || [ X${orchidee_UserChoices_output_level_sechiba_history_4dim} = XNONE ] ; then
+	# output_level_sechiba_history_4dim is not set in orchidee.card or it is set to NONE.
+	# Deactivate the file.
+	IGCM_comp_modifyXmlFile nonblocker file_def_orchidee.xml sechiba3 enabled .FALSE.
+	IGCM_comp_modifyXmlFile nonblocker file_def_orchidee.xml sechiba3 output_level 0
+	IGCM_comp_modifyXmlFile nonblocker file_def_orchidee.xml sechiba3 output_freq 1mo
+    else
+	IGCM_comp_modifyXmlFile nonblocker file_def_orchidee.xml sechiba3 enabled      .TRUE.
+	IGCM_comp_modifyXmlFile nonblocker file_def_orchidee.xml sechiba3 output_level ${orchidee_UserChoices_output_level_sechiba_history_4dim}
+	IGCM_comp_modifyXmlFile nonblocker file_def_orchidee.xml sechiba3 output_freq  ${orchidee_UserChoices_output_freq_sechiba_history_4dim}
+    fi
+        
+
+    # Add include of orchidee context in iodef.xml
+    # In iodef.xml add on next line after "COMPONENT CONTEXT"
+    #  <context id="orchidee" src="./context_orchidee.xml"/>
+    echo '<context id="orchidee" src="./context_orchidee.xml"/>' > add.tmp
+    if [ X"$( echo ${config_UserChoices_ExpType} | grep CMIP6 )" != "X" ] ; then
+	echo '<context id="orchidee" src="./ping_orchidee.xml"/>' >> add.tmp
+	echo '<context id="orchidee" src="./dr2xml_orchidee.xml"/>' >> add.tmp
+    fi
+    cp iodef.xml iodef.xml.tmp
+    sed -e "/COMPONENT CONTEXT/r add.tmp" iodef.xml.tmp > iodef.xml
+    rm iodef.xml.tmp add.tmp
+
+    # Add LongName as global attribute in XIOS output files (if LongName is not empty)
+    if [ ! "X${config_UserChoices_LongName}" = "X" ] ; then
+	listfile=$(ls file_def*orchidee.xml)
+	echo "<variable id=\"LongName\" type=\"string\">${config_UserChoices_LongName}</variable>" > add.tmp
+	for file in ${listfile}
+	do
+	    cp ${file} ${file}.tmp
+	    sed -e "/<file id/r add.tmp" \
+		${file}.tmp > ${file}
+	    rm ${file}.tmp 
+	done 
+	rm add.tmp
+    fi
+
+
+    IGCM_debug_PopStack "SRF_Update"
+}
+
+#-----------------------------------------------------------------
+function SRF_Finalize
+{
+    IGCM_debug_PushStack "SRF_Finalize"
+
+    IGCM_debug_PopStack "SRF_Finalize"
+}
Index: CMIP6/DAMIP/CM61-LR-hist-stratO3-03.2150/DRIVER/pisces.driver
===================================================================
--- CMIP6/DAMIP/CM61-LR-hist-stratO3-03.2150/DRIVER/pisces.driver	(revision 4131)
+++ CMIP6/DAMIP/CM61-LR-hist-stratO3-03.2150/DRIVER/pisces.driver	(revision 4131)
@@ -0,0 +1,120 @@
+#!/bin/ksh
+
+#-----------------------------------
+function MBG_Initialize
+{ 
+    IGCM_debug_PushStack "MBG_Initialize"
+
+    # Local function to find parameters in LMDZ .def files
+
+lmdzgrep2 () {
+     grep -w ${1} ${2} | grep -v "#"  | sed -e 's/=//g' -e 's/://g' -e 's/_AUTO_//' -e 's/DEFAULT//' | sed -e "s/${1}//" 
+}
+
+    ##--Variables used by MBG --
+
+    # ln_rsttr  boolean term for tracer model restart (true or false)
+    # nrsttr    control of the time step (0, 1 or 2)
+    
+    IGCM_debug_PopStack "MBG_Initialize"
+}
+
+#-----------------------------------
+function MBG_Update
+{
+    IGCM_debug_PushStack "MBG_Update"
+
+    ##--Write Frequency for iomput
+    ## Differents frequencies are allowed for MBG files
+
+    VT1D_ENABLE=".FALSE."
+    VT5D_ENABLE=".FALSE."
+    VT1M_ENABLE=".FALSE."
+    VT1Y_ENABLE=".FALSE."
+
+    for frequency in ${config_MBG_WriteFrequency} ; do
+        case ${frequency} in
+            ( 1D|1d ) VT1D_ENABLE=".TRUE." ;;
+            ( 5D|5d ) VT5D_ENABLE=".TRUE." ;;
+            ( 1M|1m ) VT1M_ENABLE=".TRUE." ;;
+            ( *[yY] ) VT1Y_ENABLE=".TRUE." ;;
+        esac
+    done
+
+    ##-- Restart configuration
+    ##-- Restart configuration
+    if ( [ "${opa9_UserChoices_Reproducibility_after_restart}" = "y" ] ) ; then
+        TOP_LN_RSTR=.TRUE.
+        TOP_NN_RSTR=2
+        IGCM_debug_Print 1 'WARNING : dangerous option for NEMO pisces too'
+        IGCM_debug_Print 1 'Reproducibility_after_Restart forced : ' ${opa9_UserChoices_Reproducibility_after_restart}
+
+    elif ( [ "${CumulPeriod}" -eq 1 ] && [ "${config_MBG_Restart}" = "n" ] ) ; then
+
+        #echo "NO RESTART FOR TOP"
+        TOP_LN_RSTR=.FALSE.
+        TOP_NN_RSTR=0
+
+    elif ( [ "${CumulPeriod}" -eq 1 ] && [ "${config_MBG_Restart}" = "y" ] ) ; then
+
+        #echo "RESTART TOP"
+        TOP_LN_RSTR=.TRUE.
+        TOP_NN_RSTR=0
+
+        # If we start from IPSLCM5* restart files.
+	    for file in restart_trc*.nc ; do
+            IGCM_debug_Print 1 "cmd done to modify IPSLCM5* NEMO pisces restartfile: " ncrename -v TRBDSi,TRBGSi -v TRNDSi,TRNGSi -v TRNBSi,TRNDSi -v TRBBSi,TRBDSi ${file} > /dev/null 2>&1
+            ncrename -v TRBDSi,TRBGSi -v TRNDSi,TRNGSi -v TRNBSi,TRNDSi -v TRBBSi,TRBDSi ${file} > /dev/null 2>&1
+	    done
+
+    else
+
+        #echo "RESTART TOP"
+        TOP_LN_RSTR=.TRUE.
+        TOP_NN_RSTR=2
+
+    fi
+
+
+    ##-- CO2 forcing : update atcco2 value in namelist_pisces_cfg with the same one used in LMDZ
+    IGCM_debug_Print 1 "Take same CO2 as for LMDZ, in parameter file config.def."
+    # ATM_Update is done before MBG_Update and therefore config.def file contains the correct value for CO2.
+    IGCM_debug_Print 1 'Update atcco2 in namelist_pisces_cfg with same value as for LMDZ'
+    LMDZ_CO2=$( lmdzgrep2 co2_ppm config.def )
+    IGCM_debug_Print 1 "LMDZ_CO2 : ${LMDZ_CO2} "
+    IGCM_comp_modifyNamelist force  namelist_pisces_cfg atcco2 ${LMDZ_CO2}
+
+    ##-- Update namelist_top_cfg and namelist_pisces_cfg
+    IGCM_comp_modifyNamelist blocker  namelist_top_cfg     ln_rsttr   ${TOP_LN_RSTR}
+    IGCM_comp_modifyNamelist blocker  namelist_top_cfg     nn_rsttr   ${TOP_NN_RSTR}
+    IGCM_comp_modifyNamelist blocker  namelist_pisces_cfg  nn_pisdmp  ${OPA_NPDT_YEAR}
+ 
+    # Update iodef.xml
+
+    IGCM_debug_Print 1 'Informations into iodef.xml : VT1D_ENABLE VT5D_ENABLE VT1M_ENABLE VT1Y_ENABLE '
+    IGCM_debug_Print 1 ${VT1D_ENABLE}  ${VT5D_ENABLE} ${VT1M_ENABLE} ${VT1Y_ENABLE}
+
+    IGCM_comp_modifyXmlFile nonblocker file_def_nemo-pisces.xml 1d_pis enabled ${VT1D_ENABLE}
+    IGCM_comp_modifyXmlFile nonblocker file_def_nemo-pisces.xml 5d_pis enabled ${VT5D_ENABLE}
+    IGCM_comp_modifyXmlFile nonblocker file_def_nemo-pisces.xml 1m_pis enabled ${VT1M_ENABLE}
+    IGCM_comp_modifyXmlFile nonblocker file_def_nemo-pisces.xml 1y_pis enabled ${VT1Y_ENABLE}
+
+    IGCM_comp_modifyXmlFile nonblocker file_def_nemo-pisces.xml 1d_pis output_level ${pisces_UserChoices_OutputLevel}
+    IGCM_comp_modifyXmlFile nonblocker file_def_nemo-pisces.xml 5d_pis output_level ${pisces_UserChoices_OutputLevel}
+    IGCM_comp_modifyXmlFile nonblocker file_def_nemo-pisces.xml 1m_pis output_level ${pisces_UserChoices_OutputLevel}
+    IGCM_comp_modifyXmlFile nonblocker file_def_nemo-pisces.xml 1y_pis output_level ${pisces_UserChoices_OutputLevel}
+
+   
+    IGCM_debug_PopStack "MBG_Update"
+}
+
+#-----------------------------------
+function MBG_Finalize
+{
+    IGCM_debug_PushStack "MBG_Finalize"
+
+    echo FINALIZE MBG !!!
+
+    IGCM_debug_PopStack "MBG_Finalize"
+}
+
Index: CMIP6/DAMIP/CM61-LR-hist-stratO3-03.2150/DRIVER/stomate.driver
===================================================================
--- CMIP6/DAMIP/CM61-LR-hist-stratO3-03.2150/DRIVER/stomate.driver	(revision 4131)
+++ CMIP6/DAMIP/CM61-LR-hist-stratO3-03.2150/DRIVER/stomate.driver	(revision 4131)
@@ -0,0 +1,67 @@
+#!/bin/ksh
+
+#D- Driver for ORCHIDEE stomate component (SBG)
+
+#-----------------------------------------------------------------
+function SBG_Initialize
+{
+    IGCM_debug_PushStack "SBG_Initialize"
+
+    IGCM_debug_PopStack "SBG_Initialize"
+}
+
+#-----------------------------------------------------------------
+function SBG_Update
+{
+    IGCM_debug_PushStack "SBG_Update"
+    
+    # Output management
+    # Modify file_def_orchidee.xml file using settings from stomate.card
+    # We here suppose that for each file, in stomate.card UserChoices section, if the parameter 
+    # output_level_filename is set, then also output_freq_filename must be set. The existance of output_freq_filename will not be checked. 
+    # If output_level_filename=NONE or if it is not set, the corresponding file will be deactivated.
+    
+    if [ X${stomate_UserChoices_output_level_stomate_history} = X ] || [ X${stomate_UserChoices_output_level_stomate_history} = XNONE ] ; then
+	# output_level_stomate_history is not set in stomate.card or it is set to NONE.
+	# Deactivate the file.
+	IGCM_comp_modifyXmlFile nonblocker file_def_orchidee.xml stomate1 enabled .FALSE.
+	IGCM_comp_modifyXmlFile nonblocker file_def_orchidee.xml stomate1 output_level 0
+	IGCM_comp_modifyXmlFile nonblocker file_def_orchidee.xml stomate1 output_freq 1mo
+    else
+	IGCM_comp_modifyXmlFile nonblocker file_def_orchidee.xml stomate1 enabled      .TRUE.
+	IGCM_comp_modifyXmlFile nonblocker file_def_orchidee.xml stomate1 output_level ${stomate_UserChoices_output_level_stomate_history}
+	IGCM_comp_modifyXmlFile nonblocker file_def_orchidee.xml stomate1 output_freq  ${stomate_UserChoices_output_freq_stomate_history}
+    fi
+    
+    if [ X${stomate_UserChoices_output_level_stomate_ipcc_history} = X ] || [ X${stomate_UserChoices_output_level_stomate_ipcc_history} = XNONE ] ; then
+	# output_level_stomate_ipcc_history is not set in stomate.card or it is set to NONE.
+	# Deactivate the file.
+	IGCM_comp_modifyXmlFile nonblocker file_def_orchidee.xml stomate2 enabled .FALSE.
+	IGCM_comp_modifyXmlFile nonblocker file_def_orchidee.xml stomate2 output_level 0
+	IGCM_comp_modifyXmlFile nonblocker file_def_orchidee.xml stomate2 output_freq 1mo
+    else
+	IGCM_comp_modifyXmlFile nonblocker file_def_orchidee.xml stomate2 enabled      .TRUE.
+	IGCM_comp_modifyXmlFile nonblocker file_def_orchidee.xml stomate2 output_level ${stomate_UserChoices_output_level_stomate_ipcc_history}
+	IGCM_comp_modifyXmlFile nonblocker file_def_orchidee.xml stomate2 output_freq  ${stomate_UserChoices_output_freq_stomate_ipcc_history}
+    fi
+
+        
+
+    # Define in orchidee.def if restart file should be used
+    if ( [ ${CumulPeriod} -eq 1 ] && [ "${config_SBG_Restart}" = "n" ] ) ; then
+        echo "STOMATE : without restart"
+        IGCM_comp_modifyDefFile blocker orchidee.def STOMATE_RESTART_FILEIN NONE
+    else
+        IGCM_comp_modifyDefFile blocker orchidee.def STOMATE_RESTART_FILEIN stomate_rest_in.nc
+    fi
+
+    IGCM_debug_PopStack "SBG_Update"
+}
+
+#-----------------------------------------------------------------
+function SBG_Finalize
+{
+    IGCM_debug_PushStack "SBG_Finalize"
+    
+    IGCM_debug_PopStack "SBG_Finalize"
+}
Index: CMIP6/DAMIP/CM61-LR-hist-stratO3-03.2150/DRIVER/xios.driver
===================================================================
--- CMIP6/DAMIP/CM61-LR-hist-stratO3-03.2150/DRIVER/xios.driver	(revision 4131)
+++ CMIP6/DAMIP/CM61-LR-hist-stratO3-03.2150/DRIVER/xios.driver	(revision 4131)
@@ -0,0 +1,42 @@
+#!/bin/ksh
+#-----------------------------------
+function IOS_Initialize
+{ 
+    IGCM_debug_PushStack "IOS_Initialize"
+
+    echo INITIALIZE IOS !!!
+
+    IGCM_debug_PopStack "IOS_Initialize"
+}
+
+#-----------------------------------
+function IOS_Update
+{
+    IGCM_debug_PushStack "IOS_Update"
+
+    echo UPDATE IOS !!!
+# Activate server mode
+    IGCM_comp_modifyXmlFile force iodef.xml using_server NONE true
+
+# Activate 2nd server level for CMIP6 type experiments (CMIP6 workflow)
+    if [ X"$( echo ${config_UserChoices_ExpType} | grep CMIP6 )" != "X" ] ; then
+    IGCM_comp_modifyXmlFile force iodef.xml using_server2 NONE true
+    fi
+
+    if [ -f namcouple ] ; then
+	sed -e "s/2  LMDZ oceanx/3 LMDZ oceanx ${config_Executable_IOS[1]}/" namcouple > namcouple.tmp 
+	IGCM_sys_Mv namcouple.tmp namcouple
+    fi
+
+    IGCM_debug_PopStack "IOS_Update"
+}
+
+#-----------------------------------
+function IOS_Finalize
+{
+    IGCM_debug_PushStack "IOS_Finalize"
+
+    echo FINALIZE IOS !!!
+
+    IGCM_debug_PopStack "IOS_Finalize"
+}
Index: CMIP6/DAMIP/CM61-LR-hist-stratO3-03.2150/POST/monitoring01_lim2.cfg
===================================================================
--- CMIP6/DAMIP/CM61-LR-hist-stratO3-03.2150/POST/monitoring01_lim2.cfg	(revision 4131)
+++ CMIP6/DAMIP/CM61-LR-hist-stratO3-03.2150/POST/monitoring01_lim2.cfg	(revision 4131)
@@ -0,0 +1,50 @@
+#**************************************************************
+# Author: Patrick Brockmann
+# Contact: Patrick.Brockmann@cea.fr
+# $Date: 2009/05/14 15:09:35 $
+# $Name: ATLAS_608_1_5 $
+# $Revision: 1.1.1.1 $
+# History:
+# Modification:
+#**************************************************************
+
+##################################################################################################################
+#-----------------------------------------------------------------------------------------------------------------
+#  field | files patterns | files additionnal | operations | title | units | calcul of area
+#-----------------------------------------------------------------------------------------------------------------
+#
+#   field = name of the field to monitore 
+#   files patterns = pattern of the files used to monitore the field (must be discriminant) 
+#   files additionnal = additionnal files accessible by $FER_DATA
+#   operations = operations to calculate the field 
+#   title = variable title
+#   units = variable units
+#   calcul of area = expression to use for the weight average
+#
+# Notes:
+#   - Comment lines begin by '#' character
+#   - Separator between fields is '|' character
+#   - Operations must use the ferret syntax, if several files are used precise with the syntax d=x to refer to the x dataset
+#   - files patterns, operations,title,units must be enclosed with character '"'
+#   - fields will be presented through an html page with thumbnails global, north, south, land, ocean.
+#     Use a field name with one of these pattern to display it under the corresponding thumbnail.
+#
+##################################################################################################################
+
+color=D4E3E6
+smooth=12
+#-----------------------------------------------------------------------------------------------------------------
+#  field | files patterns | files additionnal | operations | title | units | calcul of area
+#-----------------------------------------------------------------------------------------------------------------
+ iicethic_north  | "iicethic ice_pres"  | ORCA2.3_grid.nc | "(iicethic[d=1])" | "Ice thickness (NORTH)"      | "m" | "if lat[d=3] ge 0 and ice_pres[d=2] ne 0 then ice_pres[d=2]*mask[k=1,d=3]*area[d=3]"
+ iicethic_south  | "iicethic ice_pres"  | ORCA2.3_grid.nc | "(iicethic[d=1])" | "Ice thickness (SOUTH)"      | "m" | "if lat[d=3] le 0 and ice_pres[d=2] ne 0 then ice_pres[d=2]*mask[k=1,d=3]*area[d=3]"
+ isnowthi_north  | "isnowthi ice_pres"  | ORCA2.3_grid.nc | "(isnowthi[d=1])" | "Snow thickness (NORTH)"     | "m" | "if lat[d=3] ge 0 and ice_pres[d=2] ne 0 then ice_pres[d=2]*mask[k=1,d=3]*area[d=3]"
+ isnowthi_south  | "isnowthi ice_pres"  | ORCA2.3_grid.nc | "(isnowthi[d=1])" | "Snow thickness (SOUTH)"     | "m" | "if lat[d=3] le 0 and ice_pres[d=2] ne 0 then ice_pres[d=2]*mask[k=1,d=3]*area[d=3]"
+ icesurf_north   | "ice_pres"           | ORCA2.3_grid.nc | "(if lat[d=2] gt 0 then ice_pres[d=1]*area[d=2]*mask[k=1,d=2])"               | "Ice surface (NORTH)"  | "m2" | "2"
+ icesurf_south   | "ice_pres"           | ORCA2.3_grid.nc | "(if lat[d=2] lt 0 then ice_pres[d=1]*area[d=2]*mask[k=1,d=2])"               | "Ice surface (SOUTH)"  | "m2" | "2"
+ icevol_north    | "ice_pres iicethic"  | ORCA2.3_grid.nc | "(if lat[d=3] gt 0 then ice_pres[d=1]*iicethic[d=2]*area[d=3]*mask[k=1,d=3])" | "Ice volume (NORTH)"   | "m3" | "2"
+ icevol_south    | "ice_pres iicethic"  | ORCA2.3_grid.nc | "(if lat[d=3] lt 0 then ice_pres[d=1]*iicethic[d=2]*area[d=3]*mask[k=1,d=3])" | "Ice volume (SOUTH)"   | "m3" | "2"
+ snowvol_north   | "ice_pres isnowthi"  | ORCA2.3_grid.nc | "(if lat[d=3] gt 0 then ice_pres[d=1]*isnowthi[d=2]*area[d=3]*mask[k=1,d=3])" | "Snow volume (NORTH)"  | "m3" | "2"
+ snowvol_south   | "ice_pres isnowthi"  | ORCA2.3_grid.nc | "(if lat[d=3] lt 0 then ice_pres[d=1]*isnowthi[d=2]*area[d=3]*mask[k=1,d=3])" | "Snow volume (SOUTH)"  | "m3" | "2"
+#-----------------------------------------------------------------------------------------------------------------
+
Index: CMIP6/DAMIP/CM61-LR-hist-stratO3-03.2150/POST/monitoring01_lim2_ORCA1.cfg
===================================================================
--- CMIP6/DAMIP/CM61-LR-hist-stratO3-03.2150/POST/monitoring01_lim2_ORCA1.cfg	(revision 4131)
+++ CMIP6/DAMIP/CM61-LR-hist-stratO3-03.2150/POST/monitoring01_lim2_ORCA1.cfg	(revision 4131)
@@ -0,0 +1,50 @@
+#**************************************************************
+# Author: Patrick Brockmann
+# Contact: Patrick.Brockmann@cea.fr
+# $Date: 2009/05/14 15:09:35 $
+# $Name: ATLAS_608_1_5 $
+# $Revision: 1.1.1.1 $
+# History:
+# Modification:
+#**************************************************************
+
+##################################################################################################################
+#-----------------------------------------------------------------------------------------------------------------
+#  field | files patterns | files additionnal | operations | title | units | calcul of area
+#-----------------------------------------------------------------------------------------------------------------
+#
+#   field = name of the field to monitore 
+#   files patterns = pattern of the files used to monitore the field (must be discriminant) 
+#   files additionnal = additionnal files accessible by $FER_DATA
+#   operations = operations to calculate the field 
+#   title = variable title
+#   units = variable units
+#   calcul of area = expression to use for the weight average
+#
+# Notes:
+#   - Comment lines begin by '#' character
+#   - Separator between fields is '|' character
+#   - Operations must use the ferret syntax, if several files are used precise with the syntax d=x to refer to the x dataset
+#   - files patterns, operations,title,units must be enclosed with character '"'
+#   - fields will be presented through an html page with thumbnails global, north, south, land, ocean.
+#     Use a field name with one of these pattern to display it under the corresponding thumbnail.
+#
+##################################################################################################################
+
+color=D4E3E6
+smooth=12
+#-----------------------------------------------------------------------------------------------------------------
+#  field | files patterns | files additionnal | operations | title | units | calcul of area
+#-----------------------------------------------------------------------------------------------------------------
+ iicethic_north  | "iicethic ice_pres"  | eORCA1.0_grid.nc | "(iicethic[d=1])" | "Ice thickness (NORTH)"      | "m" | "if lat[d=3] ge 0 and ice_pres[d=2] ne 0 then ice_pres[d=2]*mask[k=1,d=3]*area[d=3]"
+ iicethic_south  | "iicethic ice_pres"  | eORCA1.0_grid.nc | "(iicethic[d=1])" | "Ice thickness (SOUTH)"      | "m" | "if lat[d=3] le 0 and ice_pres[d=2] ne 0 then ice_pres[d=2]*mask[k=1,d=3]*area[d=3]"
+ isnowthi_north  | "isnowthi ice_pres"  | eORCA1.0_grid.nc | "(isnowthi[d=1])" | "Snow thickness (NORTH)"     | "m" | "if lat[d=3] ge 0 and ice_pres[d=2] ne 0 then ice_pres[d=2]*mask[k=1,d=3]*area[d=3]"
+ isnowthi_south  | "isnowthi ice_pres"  | eORCA1.0_grid.nc | "(isnowthi[d=1])" | "Snow thickness (SOUTH)"     | "m" | "if lat[d=3] le 0 and ice_pres[d=2] ne 0 then ice_pres[d=2]*mask[k=1,d=3]*area[d=3]"
+ icesurf_north   | "ice_pres"           | eORCA1.0_grid.nc | "(if lat[d=2] gt 0 then ice_pres[d=1]*area[d=2]*mask[k=1,d=2])"               | "Ice surface (NORTH)"  | "m2" | "2"
+ icesurf_south   | "ice_pres"           | eORCA1.0_grid.nc | "(if lat[d=2] lt 0 then ice_pres[d=1]*area[d=2]*mask[k=1,d=2])"               | "Ice surface (SOUTH)"  | "m2" | "2"
+ icevol_north    | "ice_pres iicethic"  | eORCA1.0_grid.nc | "(if lat[d=3] gt 0 then ice_pres[d=1]*iicethic[d=2]*area[d=3]*mask[k=1,d=3])" | "Ice volume (NORTH)"   | "m3" | "2"
+ icevol_south    | "ice_pres iicethic"  | eORCA1.0_grid.nc | "(if lat[d=3] lt 0 then ice_pres[d=1]*iicethic[d=2]*area[d=3]*mask[k=1,d=3])" | "Ice volume (SOUTH)"   | "m3" | "2"
+ snowvol_north   | "ice_pres isnowthi"  | eORCA1.0_grid.nc | "(if lat[d=3] gt 0 then ice_pres[d=1]*isnowthi[d=2]*area[d=3]*mask[k=1,d=3])" | "Snow volume (NORTH)"  | "m3" | "2"
+ snowvol_south   | "ice_pres isnowthi"  | eORCA1.0_grid.nc | "(if lat[d=3] lt 0 then ice_pres[d=1]*isnowthi[d=2]*area[d=3]*mask[k=1,d=3])" | "Snow volume (SOUTH)"  | "m3" | "2"
+#-----------------------------------------------------------------------------------------------------------------
+
Index: CMIP6/DAMIP/CM61-LR-hist-stratO3-03.2150/POST/monitoring01_lim2_ORCA2.cfg
===================================================================
--- CMIP6/DAMIP/CM61-LR-hist-stratO3-03.2150/POST/monitoring01_lim2_ORCA2.cfg	(revision 4131)
+++ CMIP6/DAMIP/CM61-LR-hist-stratO3-03.2150/POST/monitoring01_lim2_ORCA2.cfg	(revision 4131)
@@ -0,0 +1,62 @@
+#**************************************************************
+# Author: Patrick Brockmann
+# Contact: Patrick.Brockmann@cea.fr
+# $Date: 2009/05/14 15:09:35 $
+# $Name: ATLAS_608_1_5 $
+# $Revision: 1.1.1.1 $
+# History:
+# Modification:
+#**************************************************************
+
+##################################################################################################################
+#-----------------------------------------------------------------------------------------------------------------
+#  field | files patterns | files additionnal | operations | title | units | calcul of area
+#-----------------------------------------------------------------------------------------------------------------
+#
+#   field = name of the field to monitore 
+#   files patterns = pattern of the files used to monitore the field (must be discriminant) 
+#   files additionnal = additionnal files accessible by $FER_DATA
+#   operations = operations to calculate the field 
+#   title = variable title
+#   units = variable units
+#   calcul of area = expression to use for the weight average
+#
+# Notes:
+#   - Comment lines begin by '#' character
+#   - Separator between fields is '|' character
+#   - Operations must use the ferret syntax, if several files are used precise with the syntax d=x to refer to the x dataset
+#   - files patterns, operations,title,units must be enclosed with character '"'
+#   - fields will be presented through an html page with thumbnails global, north, south, land, ocean.
+#     Use a field name with one of these pattern to display it under the corresponding thumbnail.
+#
+##################################################################################################################
+
+color=D4E3E6
+smooth=12
+#-----------------------------------------------------------------------------------------------------------------
+#  field | files patterns | files additionnal | operations | title | units | calcul of area
+#-----------------------------------------------------------------------------------------------------------------
+ siconc_north    | "siconc"         | ORCA2.3_grid.nc | "(siconc[d=1])"   | "Ice Fraction (NORTH)"            | "-"     | "if lat[d=2] ge 0 then mask[k=1,d=2]*area[d=2]"
+ siconc_south    | "siconc"         | ORCA2.3_grid.nc | "(siconc[d=1])"   | "Ice Fraction (SOUTH)"            | "-"     | "if lat[d=2] le 0 then mask[k=1,d=2]*area[d=2]"
+ icesurf_north   | "siconc"         | ORCA2.3_grid.nc | "(if lat[d=2] ge 0 then siconc[d=1]*mask[k=1,d=2]*area[d=2])"             | "Ice Surface (NORTH)"   | "m2"    | "2"
+ icesurf_south   | "siconc"         | ORCA2.3_grid.nc | "(if lat[d=2] le 0 then siconc[d=1]*mask[k=1,d=2]*area[d=2])"             | "Ice Surface (SOUTH)"   | "m2"    | "2"
+ icevol_north    | "sivolu siconc"  | ORCA2.3_grid.nc | "(if lat[d=3] ge 0 then sivolu[d=1]*siconc[d=2]*mask[k=1,d=3]*area[d=3])" | "Ice Volume (NORTH)"    | "m3"    | "2"
+ snowol_south    | "snvolu siconc"  | ORCA2.3_grid.nc | "(if lat[d=3] le 0 then sivolu[d=1]*siconc[d=2]*mask[k=1,d=3]*area[d=3])" | "Ice Volum  (SOUTH)"    | "m3"    | "2"
+ snowvol_north   | "snvolu siconc"  | ORCA2.3_grid.nc | "(if lat[d=3] ge 0 then snvolu[d=1]*siconc[d=2]*mask[k=1,d=3]*area[d=3])" | "Snow Volume (NORTH)"   | "m3"    | "2"
+ icevol_south    | "sivolu siconc"  | ORCA2.3_grid.nc | "(if lat[d=3] le 0 then snvolu[d=1]*siconc[d=2]*mask[k=1,d=3]*area[d=3])" | "Snow Volume (SOUTH)"   | "m3"    | "2"
+ iicethic_north  | "sithic siconc"  | ORCA2.3_grid.nc | "(sithic[d=1])"   | "Ice thickness (NORTH)"           | "m"     | "if lat[d=3] ge 0 then siconc[d=2]*mask[k=1,d=3]*area[d=3]"
+ iicethic_south  | "sithic siconc"  | ORCA2.3_grid.nc | "(sithic[d=1])"   | "Ice thickness (SOUTH)"           | "m"     | "if lat[d=3] le 0 then siconc[d=2]*mask[k=1,d=3]*area[d=3]"
+ isnowthi_north  | "snvolu siconc"  | ORCA2.3_grid.nc | "(snvolu[d=1])"   | "Snow thickness (NORTH)"          | "m"     | "if lat[d=3] ge 0 then siconc[d=2]*mask[k=1,d=3]*area[d=3]"
+ isnowthi_south  | "snvolu siconc"  | ORCA2.3_grid.nc | "(snvolu[d=1])"   | "Snow thickness (SOUTH)"          | "m"     | "if lat[d=3] le 0 then siconc[d=2]*mask[k=1,d=3]*area[d=3]"
+ sisali_north    | "sisali siconc " | ORCA2.3_grid.nc | "(sisali[d=1])"   | "Ice Salinity (NORTH)"            | "PSS"   | "if lat[d=3] ge 0 then siconc[d=2]*mask[k=1,d=3]*area[d=3]"
+ sisali_south    | "sisali siconc " | ORCA2.3_grid.nc | "(sisali[d=1])"   | "Ice Salinity (NORTH)"            | "PSS"   | "if lat[d=3] le 0 then siconc[d=2]*mask[k=1,d=3]*area[d=3]"
+ sitemp_north    | "sitemp siconc " | ORCA2.3_grid.nc | "(sitemp[d=1])"   | "Ice Temperature (NORTH)"         | "C"     | "if lat[d=3] ge 0 then siconc[d=2]*mask[k=1,d=3]*area[d=3]"
+ sitemp_south    | "sitemp siconc " | ORCA2.3_grid.nc | "(sitemp[d=1])"   | "Ice Temperature (SOUTH)"         | "C"     | "if lat[d=3] le 0 then siconc[d=2]*mask[k=1,d=3]*area[d=3]"
+ sistem_north    | "sistem siconc " | ORCA2.3_grid.nc | "(sistem[d=1])"   | "Ice Surface Temperature (NORTH)" | "C"     | "if lat[d=3] ge 0 then siconc[d=2]*mask[k=1,d=3]*area[d=3]"
+ sistem_south    | "sistem siconc " | ORCA2.3_grid.nc | "(sistem[d=1])"   | "Ice Surface Temperature (SOUTH)" | "C"     | "if lat[d=3] le 0 then siconc[d=2]*mask[k=1,d=3]*area[d=3]"
+ siages_north    | "siages siconc " | ORCA2.3_grid.nc | "(siages[d=1])"   | "Ice Age (NORTH)"                 | "years" | "if lat[d=3] ge 0 then siconc[d=2]*mask[k=1,d=3]*area[d=3]"
+ siages_south    | "siages siconc " | ORCA2.3_grid.nc | "(siages[d=1])"   | "Ice Age (SOUTH)"                 | "years" | "if lat[d=3] le 0 then siconc[d=2]*mask[k=1,d=3]*area[d=3]"
+
+
+#-----------------------------------------------------------------------------------------------------------------
+
Index: CMIP6/DAMIP/CM61-LR-hist-stratO3-03.2150/POST/monitoring01_lim3.cfg
===================================================================
--- CMIP6/DAMIP/CM61-LR-hist-stratO3-03.2150/POST/monitoring01_lim3.cfg	(revision 4131)
+++ CMIP6/DAMIP/CM61-LR-hist-stratO3-03.2150/POST/monitoring01_lim3.cfg	(revision 4131)
@@ -0,0 +1,50 @@
+#**************************************************************
+# Author: Patrick Brockmann
+# Contact: Patrick.Brockmann@cea.fr
+# $Date: 2009/05/14 15:09:35 $
+# $Name: ATLAS_608_1_5 $
+# $Revision: 1.1.1.1 $
+# History:
+# Modification:
+#**************************************************************
+
+##################################################################################################################
+#-----------------------------------------------------------------------------------------------------------------
+#  field | files patterns | files additionnal | operations | title | units | calcul of area
+#-----------------------------------------------------------------------------------------------------------------
+#
+#   field = name of the field to monitore 
+#   files patterns = pattern of the files used to monitore the field (must be discriminant) 
+#   files additionnal = additionnal files accessible by $FER_DATA
+#   operations = operations to calculate the field 
+#   title = variable title
+#   units = variable units
+#   calcul of area = expression to use for the weight average
+#
+# Notes:
+#   - Comment lines begin by '#' character
+#   - Separator between fields is '|' character
+#   - Operations must use the ferret syntax, if several files are used precise with the syntax d=x to refer to the x dataset
+#   - files patterns, operations,title,units must be enclosed with character '"'
+#   - fields will be presented through an html page with thumbnails global, north, south, land, ocean.
+#     Use a field name with one of these pattern to display it under the corresponding thumbnail.
+#
+##################################################################################################################
+
+color=D4E3E6
+smooth=12
+#-----------------------------------------------------------------------------------------------------------------
+#  field | files patterns | files additionnal | operations | title | units | calcul of area
+#-----------------------------------------------------------------------------------------------------------------
+ iicethic_north  | "iicethic ice_pres"  | ORCA2.3_grid.nc | "(iicethic[d=1])" | "Ice thickness (NORTH)"      | "m" | "if lat[d=3] ge 0 and ice_pres[d=2] ne 0 then ice_pres[d=2]*mask[k=1,d=3]*area[d=3]"
+ iicethic_south  | "iicethic ice_pres"  | ORCA2.3_grid.nc | "(iicethic[d=1])" | "Ice thickness (SOUTH)"      | "m" | "if lat[d=3] le 0 and ice_pres[d=2] ne 0 then ice_pres[d=2]*mask[k=1,d=3]*area[d=3]"
+ isnowthi_north  | "isnowthi ice_pres"  | ORCA2.3_grid.nc | "(isnowthi[d=1])" | "Snow thickness (NORTH)"     | "m" | "if lat[d=3] ge 0 and ice_pres[d=2] ne 0 then ice_pres[d=2]*mask[k=1,d=3]*area[d=3]"
+ isnowthi_south  | "isnowthi ice_pres"  | ORCA2.3_grid.nc | "(isnowthi[d=1])" | "Snow thickness (SOUTH)"     | "m" | "if lat[d=3] le 0 and ice_pres[d=2] ne 0 then ice_pres[d=2]*mask[k=1,d=3]*area[d=3]"
+ icesurf_north   | "ice_pres"           | ORCA2.3_grid.nc | "(if lat[d=2] gt 0 then ice_pres[d=1]*area[d=2]*mask[k=1,d=2])"               | "Ice surface (NORTH)"  | "m2" | "2"
+ icesurf_south   | "ice_pres"           | ORCA2.3_grid.nc | "(if lat[d=2] lt 0 then ice_pres[d=1]*area[d=2]*mask[k=1,d=2])"               | "Ice surface (SOUTH)"  | "m2" | "2"
+ icevol_north    | "ice_pres iicethic"  | ORCA2.3_grid.nc | "(if lat[d=3] gt 0 then ice_pres[d=1]*iicethic[d=2]*area[d=3]*mask[k=1,d=3])" | "Ice volume (NORTH)"   | "m3" | "2"
+ icevol_south    | "ice_pres iicethic"  | ORCA2.3_grid.nc | "(if lat[d=3] lt 0 then ice_pres[d=1]*iicethic[d=2]*area[d=3]*mask[k=1,d=3])" | "Ice volume (SOUTH)"   | "m3" | "2"
+ snowvol_north   | "ice_pres isnowthi"  | ORCA2.3_grid.nc | "(if lat[d=3] gt 0 then ice_pres[d=1]*isnowthi[d=2]*area[d=3]*mask[k=1,d=3])" | "Snow volume (NORTH)"  | "m3" | "2"
+ snowvol_south   | "ice_pres isnowthi"  | ORCA2.3_grid.nc | "(if lat[d=3] lt 0 then ice_pres[d=1]*isnowthi[d=2]*area[d=3]*mask[k=1,d=3])" | "Snow volume (SOUTH)"  | "m3" | "2"
+#-----------------------------------------------------------------------------------------------------------------
+
Index: CMIP6/DAMIP/CM61-LR-hist-stratO3-03.2150/POST/monitoring01_lim3_ORCA1.cfg
===================================================================
--- CMIP6/DAMIP/CM61-LR-hist-stratO3-03.2150/POST/monitoring01_lim3_ORCA1.cfg	(revision 4131)
+++ CMIP6/DAMIP/CM61-LR-hist-stratO3-03.2150/POST/monitoring01_lim3_ORCA1.cfg	(revision 4131)
@@ -0,0 +1,69 @@
+#**************************************************************
+# Author: Patrick Brockmann
+# Contact: Patrick.Brockmann@cea.fr
+# $Date: 2009/05/14 15:09:35 $
+# $Name: ATLAS_608_1_5 $
+# $Revision: 1.1.1.1 $
+# History:
+# Modification:
+#**************************************************************
+
+##################################################################################################################
+#-----------------------------------------------------------------------------------------------------------------
+#  field | files patterns | files additionnal | operations | title | units | calcul of area
+#-----------------------------------------------------------------------------------------------------------------
+#
+#   field = name of the field to monitore 
+#   files patterns = pattern of the files used to monitore the field (must be discriminant) 
+#   files additionnal = additionnal files accessible by $FER_DATA
+#   operations = operations to calculate the field 
+#   title = variable title
+#   units = variable units
+#   calcul of area = expression to use for the weight average
+#
+# Notes:
+#   - Comment lines begin by '#' character
+#   - Separator between fields is '|' character
+#   - Operations must use the ferret syntax, if several files are used precise with the syntax d=x to refer to the x dataset
+#   - files patterns, operations,title,units must be enclosed with character '"'
+#   - fields will be presented through an html page with thumbnails global, north, south, land, ocean.
+#     Use a field name with one of these pattern to display it under the corresponding thumbnail.
+#
+##################################################################################################################
+
+color=D4E3E6
+smooth=12
+#-----------------------------------------------------------------------------------------------------------------
+#  field | files patterns | files additionnal | operations | title | units | calcul of area
+#-----------------------------------------------------------------------------------------------------------------
+# Commented until siconc is fixes in icemod.nc
+# siconc_north    | "siconc"  | eORCA1.1_grid.nc | "(siconc[d=1])"   | "Ice Fraction (NORTH)"            | "-"     | "if lat[d=2] ge 0 then mask[k=1,d=2]*area[d=2]"
+# siconc_south    | "siconc"  | eORCA1.1_grid.nc | "(siconc[d=1])"   | "Ice Fraction (SOUTH)"            | "-"     | "if lat[d=2] le 0 then mask[k=1,d=2]*area[d=2]"
+# icesurf_north   | "siconc"  | eORCA1.1_grid.nc | "(if lat[d=2] ge 0 then siconc[d=1]*mask[k=1,d=2]*area[d=2])"   | "Ice Surface (NORTH)"   | "m2"    | "2"
+# icesurf_south   | "siconc"  | eORCA1.1_grid.nc | "(if lat[d=2] le 0 then siconc[d=1]*mask[k=1,d=2]*area[d=2])"   | "Ice Surface (SOUTH)"   | "m2"    | "2"
+# Temporary fix
+ siconc_north    | "sivolu sithic"  | eORCA1.2_grid.nc | "(sivolu[d=1]/sithic[d=2])"   | "Ice Fraction (NORTH)"            | "-"     | "if lat[d=3] ge 0 then mask[k=1,d=3]*area[d=3]" 
+ siconc_south    | "sivolu sithic"  | eORCA1.2_grid.nc | "(sivolu[d=1]/sithic[d=2])"   | "Ice Fraction (SOUTH)"            | "-"     | "if lat[d=3] le 0 then mask[k=1,d=3]*area[d=3]"
+ snowvol_north   | "snvolu"  | eORCA1.2_grid.nc | "(if lat[d=2] ge 0 then snvolu[d=1]*mask[k=1,d=2]*area[d=2])"   | "Snow Volume (NORTH)"   | "m3"    | "2"
+ snowvol_south   | "snvolu"  | eORCA1.2_grid.nc | "(if lat[d=2] le 0 then snvolu[d=1]*mask[k=1,d=2]*area[d=2])"   | "Snow Volume  (SOUTH)"    | "m3"    | "2"
+ icevol_north    | "sivolu"  | eORCA1.2_grid.nc | "(if lat[d=2] ge 0 then sivolu[d=1]*mask[k=1,d=2]*area[d=2])"   | "Ice Volume (NORTH)"   | "m3"    | "2"
+ icevol_north_MAR    | "sivolu"  | eORCA1.2_grid.nc  | "(if lat[d=2] ge 0 and STRINDEX(TAX_DATESTRING(t[gt=sivolu[d=1]], sivolu[i=1,j=1,k=1,d=1], \"month\"), \"MAR\") then sivolu[d=1]*area[d=2]*mask[k=1,d=2])" | "Ice volume (NORTH) (March)"   | "m3" | "2" | "@FNR"
+ icevol_north_SEP_prio    | "sivolu"  | eORCA1.2_grid.nc  | "(if lat[d=2] ge 0 and STRINDEX(TAX_DATESTRING(t[gt=sivolu[d=1]], sivolu[i=1,j=1,k=1,d=1], \"month\"), \"SEP\") then sivolu[d=1]*area[d=2]*mask[k=1,d=2])" | "Ice volume (NORTH) (September)"   | "m3" | "2" | "@FNR"
+ icevol_south    | "sivolu"  | eORCA1.2_grid.nc | "(if lat[d=2] le 0 then sivolu[d=1]*mask[k=1,d=2]*area[d=2])"   | "Ice Volume (SOUTH)"   | "m3"    | "2"  
+ icevol_south_MAR    | "sivolu"  | eORCA1.2_grid.nc  | "(if lat[d=2] le 0 and STRINDEX(TAX_DATESTRING(t[gt=sivolu[d=1]], sivolu[i=1,j=1,k=1,d=1], \"month\"), \"MAR\") then sivolu[d=1]*area[d=2]*mask[k=1,d=2])" | "Ice volume (SOUTH) (March)"   | "m3" | "2" | "@FNR"
+ icevol_south_SEP    | "sivolu"  | eORCA1.2_grid.nc  | "(if lat[d=2] le 0 and STRINDEX(TAX_DATESTRING(t[gt=sivolu[d=1]], sivolu[i=1,j=1,k=1,d=1], \"month\"), \"SEP\") then sivolu[d=1]*area[d=2]*mask[k=1,d=2])" | "Ice volume (SOUTH) (September)"   | "m3" | "2" | "@FNR"
+ iicethic_north  | "sithic"  | eORCA1.2_grid.nc | "(sithic[d=1])"   | "Ice thickness (NORTH)"           | "m"     | "if lat[d=2] ge 0 then mask[k=1,d=2]*area[d=2]"
+ iicethic_south  | "sithic"  | eORCA1.2_grid.nc | "(sithic[d=1])"   | "Ice thickness (SOUTH)"           | "m"     | "if lat[d=2] le 0 then mask[k=1,d=2]*area[d=2]"
+ isnowthi_north  | "snvolu"  | eORCA1.2_grid.nc | "(snvolu[d=1])"   | "Snow thickness (NORTH)"          | "m"     | "if lat[d=2] ge 0 then mask[k=1,d=2]*area[d=2]"
+ isnowthi_south  | "snvolu"  | eORCA1.2_grid.nc | "(snvolu[d=1])"   | "Snow thickness (SOUTH)"          | "m"     | "if lat[d=2] le 0 then mask[k=1,d=2]*area[d=2]"
+# Following fields should be weighted by siconc
+ sisali_north    | "sisali"  | eORCA1.2_grid.nc | "(sisali[d=1])"   | "Ice Salinity (NORTH)"            | "PSS"   | "if lat[d=2] ge 0 then mask[k=1,d=2]*area[d=2]"
+ sisali_south    | "sisali"  | eORCA1.2_grid.nc | "(sisali[d=1])"   | "Ice Salinity (NORTH)"            | "PSS"   | "if lat[d=2] le 0 then mask[k=1,d=2]*area[d=2]"
+ sitemp_north    | "sitemp"  | eORCA1.2_grid.nc | "(sitemp[d=1])"   | "Ice Temperature (NORTH)"         | "C"     | "if lat[d=2] ge 0 then mask[k=1,d=2]*area[d=2]"
+ sitemp_south    | "sitemp"  | eORCA1.2_grid.nc | "(sitemp[d=1])"   | "Ice Temperature (SOUTH)"         | "C"     | "if lat[d=2] le 0 then mask[k=1,d=2]*area[d=2]"
+ sistem_north    | "sistem"  | eORCA1.2_grid.nc | "(sistem[d=1])"   | "Ice Surface Temperature (NORTH)" | "C"     | "if lat[d=2] ge 0 then mask[k=1,d=2]*area[d=2]"
+ sistem_south    | "sistem"  | eORCA1.2_grid.nc | "(sistem[d=1])"   | "Ice Surface Temperature (SOUTH)" | "C"     | "if lat[d=2] le 0 then mask[k=1,d=2]*area[d=2]"
+ siages_north    | "siages"  | eORCA1.2_grid.nc | "(siages[d=1])"   | "Ice Age (NORTH)"                 | "years" | "if lat[d=2] ge 0 then mask[k=1,d=2]*area[d=2]"
+ siages_south    | "siages"  | eORCA1.2_grid.nc | "(siages[d=1])"   | "Ice Age (SOUTH)"                 | "years" | "if lat[d=2] le 0 then mask[k=1,d=2]*area[d=2]"
+#-----------------------------------------------------------------------------------------------------------------
+
Index: CMIP6/DAMIP/CM61-LR-hist-stratO3-03.2150/POST/monitoring01_lim3_ORCA2.cfg
===================================================================
--- CMIP6/DAMIP/CM61-LR-hist-stratO3-03.2150/POST/monitoring01_lim3_ORCA2.cfg	(revision 4131)
+++ CMIP6/DAMIP/CM61-LR-hist-stratO3-03.2150/POST/monitoring01_lim3_ORCA2.cfg	(revision 4131)
@@ -0,0 +1,62 @@
+#**************************************************************
+# Author: Patrick Brockmann
+# Contact: Patrick.Brockmann@cea.fr
+# $Date: 2009/05/14 15:09:35 $
+# $Name: ATLAS_608_1_5 $
+# $Revision: 1.1.1.1 $
+# History:
+# Modification:
+#**************************************************************
+
+##################################################################################################################
+#-----------------------------------------------------------------------------------------------------------------
+#  field | files patterns | files additionnal | operations | title | units | calcul of area
+#-----------------------------------------------------------------------------------------------------------------
+#
+#   field = name of the field to monitore 
+#   files patterns = pattern of the files used to monitore the field (must be discriminant) 
+#   files additionnal = additionnal files accessible by $FER_DATA
+#   operations = operations to calculate the field 
+#   title = variable title
+#   units = variable units
+#   calcul of area = expression to use for the weight average
+#
+# Notes:
+#   - Comment lines begin by '#' character
+#   - Separator between fields is '|' character
+#   - Operations must use the ferret syntax, if several files are used precise with the syntax d=x to refer to the x dataset
+#   - files patterns, operations,title,units must be enclosed with character '"'
+#   - fields will be presented through an html page with thumbnails global, north, south, land, ocean.
+#     Use a field name with one of these pattern to display it under the corresponding thumbnail.
+#
+##################################################################################################################
+
+color=D4E3E6
+smooth=12
+#-----------------------------------------------------------------------------------------------------------------
+#  field | files patterns | files additionnal | operations | title | units | calcul of area
+#-----------------------------------------------------------------------------------------------------------------
+ siconc_north    | "siconc"         | ORCA2.3_grid.nc | "(siconc[d=1])"   | "Ice Fraction (NORTH)"            | "-"     | "if lat[d=2] ge 0 then mask[k=1,d=2]*area[d=2]"
+ siconc_south    | "siconc"         | ORCA2.3_grid.nc | "(siconc[d=1])"   | "Ice Fraction (SOUTH)"            | "-"     | "if lat[d=2] le 0 then mask[k=1,d=2]*area[d=2]"
+ icesurf_north   | "siconc"         | ORCA2.3_grid.nc | "(if lat[d=2] ge 0 then siconc[d=1]*mask[k=1,d=2]*area[d=2])"             | "Ice Surface (NORTH)"   | "m2"    | "2"
+ icesurf_south   | "siconc"         | ORCA2.3_grid.nc | "(if lat[d=2] le 0 then siconc[d=1]*mask[k=1,d=2]*area[d=2])"             | "Ice Surface (SOUTH)"   | "m2"    | "2"
+ icevol_north    | "sivolu siconc"  | ORCA2.3_grid.nc | "(if lat[d=3] ge 0 then sivolu[d=1]*siconc[d=2]*mask[k=1,d=3]*area[d=3])" | "Ice Volume (NORTH)"    | "m3"    | "2"
+ snowol_south    | "snvolu siconc"  | ORCA2.3_grid.nc | "(if lat[d=3] le 0 then sivolu[d=1]*siconc[d=2]*mask[k=1,d=3]*area[d=3])" | "Ice Volum  (SOUTH)"    | "m3"    | "2"
+ snowvol_north   | "snvolu siconc"  | ORCA2.3_grid.nc | "(if lat[d=3] ge 0 then snvolu[d=1]*siconc[d=2]*mask[k=1,d=3]*area[d=3])" | "Snow Volume (NORTH)"   | "m3"    | "2"
+ icevol_south    | "sivolu siconc"  | ORCA2.3_grid.nc | "(if lat[d=3] le 0 then snvolu[d=1]*siconc[d=2]*mask[k=1,d=3]*area[d=3])" | "Snow Volume (SOUTH)"   | "m3"    | "2"
+ iicethic_north  | "sithic siconc"  | ORCA2.3_grid.nc | "(sithic[d=1])"   | "Ice thickness (NORTH)"           | "m"     | "if lat[d=3] ge 0 then siconc[d=2]*mask[k=1,d=3]*area[d=3]"
+ iicethic_south  | "sithic siconc"  | ORCA2.3_grid.nc | "(sithic[d=1])"   | "Ice thickness (SOUTH)"           | "m"     | "if lat[d=3] le 0 then siconc[d=2]*mask[k=1,d=3]*area[d=3]"
+ isnowthi_north  | "snvolu siconc"  | ORCA2.3_grid.nc | "(snvolu[d=1])"   | "Snow thickness (NORTH)"          | "m"     | "if lat[d=3] ge 0 then siconc[d=2]*mask[k=1,d=3]*area[d=3]"
+ isnowthi_south  | "snvolu siconc"  | ORCA2.3_grid.nc | "(snvolu[d=1])"   | "Snow thickness (SOUTH)"          | "m"     | "if lat[d=3] le 0 then siconc[d=2]*mask[k=1,d=3]*area[d=3]"
+ sisali_north    | "sisali siconc " | ORCA2.3_grid.nc | "(sisali[d=1])"   | "Ice Salinity (NORTH)"            | "PSS"   | "if lat[d=3] ge 0 then siconc[d=2]*mask[k=1,d=3]*area[d=3]"
+ sisali_south    | "sisali siconc " | ORCA2.3_grid.nc | "(sisali[d=1])"   | "Ice Salinity (NORTH)"            | "PSS"   | "if lat[d=3] le 0 then siconc[d=2]*mask[k=1,d=3]*area[d=3]"
+ sitemp_north    | "sitemp siconc " | ORCA2.3_grid.nc | "(sitemp[d=1])"   | "Ice Temperature (NORTH)"         | "C"     | "if lat[d=3] ge 0 then siconc[d=2]*mask[k=1,d=3]*area[d=3]"
+ sitemp_south    | "sitemp siconc " | ORCA2.3_grid.nc | "(sitemp[d=1])"   | "Ice Temperature (SOUTH)"         | "C"     | "if lat[d=3] le 0 then siconc[d=2]*mask[k=1,d=3]*area[d=3]"
+ sistem_north    | "sistem siconc " | ORCA2.3_grid.nc | "(sistem[d=1])"   | "Ice Surface Temperature (NORTH)" | "C"     | "if lat[d=3] ge 0 then siconc[d=2]*mask[k=1,d=3]*area[d=3]"
+ sistem_south    | "sistem siconc " | ORCA2.3_grid.nc | "(sistem[d=1])"   | "Ice Surface Temperature (SOUTH)" | "C"     | "if lat[d=3] le 0 then siconc[d=2]*mask[k=1,d=3]*area[d=3]"
+ siages_north    | "siages siconc " | ORCA2.3_grid.nc | "(siages[d=1])"   | "Ice Age (NORTH)"                 | "years" | "if lat[d=3] ge 0 then siconc[d=2]*mask[k=1,d=3]*area[d=3]"
+ siages_south    | "siages siconc " | ORCA2.3_grid.nc | "(siages[d=1])"   | "Ice Age (SOUTH)"                 | "years" | "if lat[d=3] le 0 then siconc[d=2]*mask[k=1,d=3]*area[d=3]"
+
+
+#-----------------------------------------------------------------------------------------------------------------
+
Index: CMIP6/DAMIP/CM61-LR-hist-stratO3-03.2150/POST/monitoring01_lmdz.cfg
===================================================================
--- CMIP6/DAMIP/CM61-LR-hist-stratO3-03.2150/POST/monitoring01_lmdz.cfg	(revision 4131)
+++ CMIP6/DAMIP/CM61-LR-hist-stratO3-03.2150/POST/monitoring01_lmdz.cfg	(revision 4131)
@@ -0,0 +1,73 @@
+#**************************************************************
+# Author: Patrick Brockmann
+# Contact: Patrick.Brockmann@cea.fr
+# $Date: 2009/05/14 15:09:35 $
+# $Name: ATLAS_608_1_5 $
+# $Revision: 1.1.1.2 $
+# History:
+# Modification:
+#**************************************************************
+
+##################################################################################################################
+#-----------------------------------------------------------------------------------------------------------------
+#  field | files patterns | files additionnal | operations | title | units | calcul of area
+#-----------------------------------------------------------------------------------------------------------------
+#
+#   field = name of the field to monitore 
+#   files patterns = pattern of the files used to monitore the field (must be discriminant) 
+#   files additionnal = additionnal files accessible by $FER_DATA
+#   operations = operations to calculate the field 
+#   title = variable title
+#   units = variable units
+#   calcul of area = expression to use for the weight average
+#
+# Notes:
+#   - Comment lines begin by # character.
+#   - Separator between fields is | character.
+#   - Operations must use the ferret syntax, if several files are used precise with the syntax d=x to refer to the x dataset.
+#     They must be enclosed by parenthesis if more than one variable is used.
+#   - files patterns,files additionnal,operations,title,units must be enclosed with character ". 
+#     Use "" if empty.
+#   - Fields will be presented through an html page with thumbnails global, north, south, land, ocean.
+#     Use a field name with one of these pattern to display it under the corresponding thumbnail.
+#
+##################################################################################################################
+
+color=AECDFF
+smooth=12
+#-----------------------------------------------------------------------------------------------------------------
+#  field | files patterns | files additionnal | operations | title | units | calcul of area
+#-----------------------------------------------------------------------------------------------------------------
+ bils_global    | "bils"                       | "" | "bils[d=1]"               | "Surf. total heat flux (GLOBAL)"         | "W/m^2"     | "aire[d=1]"   
+ nettop_global  | "tops topl"                  | "" | "(tops[d=1]-topl[d=2])"   | "TOA. total heat flux (GLOBAL)"          | "W/m^2"     | "aire[d=1]"
+ nettop0_global | "tops0 topl0"                | "" | "(tops0[d=1]-topl0[d=2])" | "TOA. total heat flux ClearSky (GLOBAL)" | "W/m^2"     | "aire[d=1]"
+ t2m_global_prio     | "t2m"                        | "" | "(t2m[d=1]-273.15)"       | "Temperature at 2 meters (GLOBAL)"       | "degrees C" | "aire[d=1]"
+ t2m_land       | "t2m pourc_ter pourc_lic"    | "" | "(t2m[d=1]-273.15)"       | "Temperature at 2 meters (LAND)"         | "degrees C" | "aire[d=1]*((pourc_ter[d=2]+pourc_lic[d=3])/100.)"
+ tsol_global    | "tsol"                       | "" | "(tsol[d=1]-273.15)"      | "Surface Temperature (GLOBAL)"           | "degrees C" | "aire[d=1]"
+ tsol_land      | "tsol pourc_ter pourc_lic"   | "" | "(tsol[d=1]-273.15)"      | "Surface Temperature (LAND)"             | "degrees C" | "aire[d=1]*((pourc_ter[d=2]+pourc_lic[d=3])/100.)"
+ precip_global  | "precip"                     | "" | "precip[d=1]*86400"       | "Precipitation Totale liq+sol (GLOBAL)"  | "mm/d"      | "aire[d=1]"
+ precip_land    | "precip pourc_ter pourc_lic" | "" | "precip[d=1]*86400"       | "Precipitation Totale liq+sol (LAND)"    | "mm/d"      | "aire[d=1]*((pourc_ter[d=2]+pourc_lic[d=3])/100.)"
+ evap_global    | "evap"                       | "" | "evap[d=1]"               | "Evaporation (GLOBAL)"                   | "kg/(s*m2)" | "aire[d=1]"
+ evap_land      | "evap pourc_ter pourc_lic"   | "" | "evap[d=1]"               | "Evaporation (LAND)"                     | "kg/(s*m2)" | "aire[d=1]*((pourc_ter[d=2]+pourc_lic[d=3])/100.)"
+ flat_global    | "flat"                       | "" | "flat[d=1]"               | "Surf. latent heat flux (GLOBAL)"         | "W/m^2"     | "aire[d=1]"
+ prw_global     | "prw"                        | "" | "prw[d=1]"                | "Precipitable water (GLOBAL)"            | "kg/m^2"    | "aire[d=1]"
+ ener_global    | "nettop precip snow sols soll sens" | "" | "nettop[d=1,x=@ave,y=@ave]+(precip[d=2,x=@ave,y=@ave]-snow[d=3,x=@ave,y=@ave])*2.5008E+6+snow[d=3,x=@ave,y=@ave]*2.8345E+6-sols[d=4,x=@ave,y=@ave]-soll[d=5,x=@ave,y=@ave]-sens[d=6,x=@ave,y=@ave]" | "Destruction d energie par l atmosphere" | "W/m^2" | "1" |
+ bils_corrected_global  | "bils precip snow flat" | "" | "bils[d=1,x=@ave,y=@ave]-flat[d=4,x=@ave,y=@ave]-(precip[d=2,x=@ave,y=@ave]-snow[d=3,x=@ave,y=@ave])*2.5008E+6-snow[d=3,x=@ave,y=@ave]*2.8345E+6" | "Corrected energy budget at surface" | "W/m^2" | "1" |
+ vitu_qbo               | "vitu"                  | "" | "vitu[y=-5:5@ave,x=-180:180@ave,z=5000,d=1]"                | "vitu at 5000 Pa for QBO +5deg/-5deg"            | "m/s"    | "1"
+ od550aer_tropo_forcing | "od550aer"              | "" | "od550aer[d=1]"           | "Total aerosol optical depth at 550nm"   | "-"         | "aire[d=1]"   
+ od550aer_strat_forcing | "od550_STRAT"           | "" | "od550_STRAT[d=1]"        | "Aerosol optical depth at 550nm"         | "-"         | "aire[d=1]"   
+ od550lt1aer_forcing    | "od550lt1aer"           | "" | "od550lt1aer[d=1]"        | "Fine mode optical depth"                | "-"         | "aire[d=1]"   
+ tro3_strato_forcing_DU | "colO3_strat"           | "" | "colO3_strat[x=@ave,y=@ave,d=1]"     | "colonne ozone strato" | "DU" | ""
+ tro3_tropo_forcing_DU  | "colO3_trop"            | "" | "colO3_trop[x=@ave,y=@ave,d=1]"      | "colonne ozone trop"   | "DU" | ""
+ solaire_forcing        | "solaire"               | "" | "solaire[d=1]"   | "Constante solaire"      | "W/m^2" | "1"
+ rsun1_forcing          | "rsun1"                 | "" | "rsun1[d=1]"     | "Fraction bande 1"       | "-"     | "1"
+ co2_ppm_forcing        | "co2_ppm"               | "" | "co2_ppm[d=1]"   | "Concentration du CO2"   | "ppm"   | "1"
+ CH4_ppb_forcing        | "CH4_ppb"               | "" | "CH4_ppb[d=1]"   | "Concentration du CH4"   | "ppb"   | "1"
+ N2O_ppb_forcing        | "N2O_ppb"               | "" | "N2O_ppb[d=1]"   | "Concentration du N2O"   | "ppb"   | "1"
+ CFC11_ppt_forcing      | "CFC11_ppt"             | "" | "CFC11_ppt[d=1]" | "Concentration du CFC11" | "ppt"   | "1"
+ CFC12_ppt_forcing      | "CFC12_ppt"             | "" | "CFC12_ppt[d=1]" | "Concentration du CFC12" | "ppt"   | "1"
+## R_ecc_forcing      | "R_ecc"                  | "" | "R_ecc[d=1]"   | "Excentricite"      | "-"     | "1"
+## R_peri_forcing     | "R_peri"                 | "" | "R_peri[d=1]"  | "Equinoxe"          | "-"     | "1"
+## R_incl_forcing     | "R_incl"                 | "" | "R_incl[d=1]"  | "Inclinaison"       | "deg"   | "1"
+#-----------------------------------------------------------------------------------------------------------------
+
Index: CMIP6/DAMIP/CM61-LR-hist-stratO3-03.2150/POST/monitoring01_opa9.cfg
===================================================================
--- CMIP6/DAMIP/CM61-LR-hist-stratO3-03.2150/POST/monitoring01_opa9.cfg	(revision 4131)
+++ CMIP6/DAMIP/CM61-LR-hist-stratO3-03.2150/POST/monitoring01_opa9.cfg	(revision 4131)
@@ -0,0 +1,67 @@
+#**************************************************************
+# Author: Patrick Brockmann
+# Contact: Patrick.Brockmann@cea.fr
+# $Date: 2009/05/14 15:09:35 $
+# $Name: ATLAS_608_1_5 $
+# $Revision: 1.1.1.1 $
+# History:
+# Modification:
+#**************************************************************
+
+##################################################################################################################
+#-----------------------------------------------------------------------------------------------------------------
+#  field | files patterns | files additionnal | operations | title | units | calcul of area
+#-----------------------------------------------------------------------------------------------------------------
+#
+#   field = name of the field to monitore 
+#   files patterns = pattern of the files used to monitore the field (must be discriminant) 
+#   files additionnal = additionnal files accessible by $FER_DATA
+#   operations = operations to calculate the field 
+#   title = variable title
+#   units = variable units
+#   calcul of area = expression to use for the weight average
+#
+# Notes:
+#   - Comment lines begin by '#' character
+#   - Separator between fields is '|' character
+#   - Operations must use the ferret syntax
+#   - Each variable must be referenced to its dataset ie var[d=x]
+#   - files patterns, operations,title,units must be enclosed with character '"'
+#   - fields will be presented through an html page with thumbnails global, north, south, land, ocean.
+#     Use a field name with one of these pattern to display it under the corresponding thumbnail.
+#
+##################################################################################################################
+
+color=6D80FF
+smooth=12
+#-----------------------------------------------------------------------------------------------------------------
+#  field | files patterns | files additionnal | operations | title | units | calcul of area
+#-----------------------------------------------------------------------------------------------------------------
+ sosstsst_global  | "sosstsst"  | ORCA2.3_grid.nc | "(sosstsst[d=1])"                                    | "Sea Surface Temperature (GLOBAL)" | "degC"  | "mask[k=1,d=2]*area[d=2]"
+ sohtc300_global  | "sohtc300"  | ORCA2.3_grid.nc | "(sohtc300[d=1])"                                    | "Heat content 300 m (GLOBAL)"      | "W"     | "mask[k=1,d=2]*area[d=2]"
+ sosaline_global  | "sosaline"  | ORCA2.3_grid.nc | "(sosaline[d=1])"                                    | "Sea Surface Salinity (GLOBAL)"    | "PSU"   | "mask[k=1,d=2]*area[d=2]"
+ sossheig_global  | "sossheig"  | ORCA2.3_grid.nc | "(sossheig[d=1])"                                    | "Sea Surface Heigh (GLOBAL)"       | "m"     | "mask[k=1,d=2]*area[d=2]"
+ sohefldo_global  | "sohefldo"  | ORCA2.3_grid.nc | "(sohefldo[d=1])"                                    | "Net Downward Heat Flux (GLOBAL)"  | "W/m^2" | "mask[k=1,d=2]*area[d=2]"
+ nadw_ocean       | "zomsfatl"  |       ""        | "(zomsfatl[z=500:6000@max,J=10:114@max,d=1])"        | "North Atlantic Deep Water"        | "Sv"    | "1"
+ npdw_ocean       | "zomsfpac"  |       ""        | "(zomsfpac[z=500:6000@max,J=10:114@max,d=1])"        | "North Pacific Deep Water"         | "Sv"    | "1"
+ aabw_ocean       | "zomsfglo"  |       ""        | "(zomsfglo[z=2000:6000@max,J=37:118@max,d=1])"       | "Antarctic Bottom Water"           | "Sv"    | "1"
+ deacon_ocean     | "zomsfglo"  |       ""        | "(zomsfglo[z=2000:6000@max,J=2:50@max,d=1])"         | "Deacon Cell"                      | "Sv"    | "1"
+ somxl010_north   | "somxl010"  | ORCA2.3_grid.nc | "(somxl010[d=1])" | "Mixed layer depth (NORTH)"         | "m"     | "(if lat[d=2] gt 0 then mask[k=1,d=2]*area[d=2])"
+ somxl010_south   | "somxl010"  | ORCA2.3_grid.nc | "(somxl010[d=1])" | "Mixed layer depth (SOUTH)"         | "m"     | "(if lat[d=2] lt 0 then mask[k=1,d=2]*area[d=2])"
+ sosstsst_70N_90N | "sosstsst"  | ORCA2.3_grid.nc | "(sosstsst[d=1])" | "Sea Surface Temperature (70N-90N)" | "degC"  | "(if lat[d=2] ge  70                     then mask[k=1,d=2]*area[d=2])"
+ sosstsst_50N_70N | "sosstsst"  | ORCA2.3_grid.nc | "(sosstsst[d=1])" | "Sea Surface Temperature (50N-70N)" | "degC"  | "(if lat[d=2] ge  50 and lat[d=2] le  70 then mask[k=1,d=2]*area[d=2])"
+ sosstsst_30N_50N | "sosstsst"  | ORCA2.3_grid.nc | "(sosstsst[d=1])" | "Sea Surface Temperature (30N-50N)" | "degC"  | "(if lat[d=2] ge  30 and lat[d=2] le  50 then mask[k=1,d=2]*area[d=2])"
+ sosstsst_10N_30N | "sosstsst"  | ORCA2.3_grid.nc | "(sosstsst[d=1])" | "Sea Surface Temperature (10N-30N)" | "degC"  | "(if lat[d=2] ge  10 and lat[d=2] le  30 then mask[k=1,d=2]*area[d=2])"
+ sosstsst_10S_10N | "sosstsst"  | ORCA2.3_grid.nc | "(sosstsst[d=1])" | "Sea Surface Temperature (10S-10N)" | "degC"  | "(if lat[d=2] ge -10 and lat[d=2] le  10 then mask[k=1,d=2]*area[d=2])"
+ sosstsst_30S_10S | "sosstsst"  | ORCA2.3_grid.nc | "(sosstsst[d=1])" | "Sea Surface Temperature (30S-10S)" | "degC"  | "(if lat[d=2] ge -30 and lat[d=2] le -10 then mask[k=1,d=2]*area[d=2])"
+ sosstsst_50S_30S | "sosstsst"  | ORCA2.3_grid.nc | "(sosstsst[d=1])" | "Sea Surface Temperature (50S-30S)" | "degC"  | "(if lat[d=2] ge -50 and lat[d=2] le -30 then mask[k=1,d=2]*area[d=2])"
+ sosstsst_70S_50S | "sosstsst"  | ORCA2.3_grid.nc | "(sosstsst[d=1])" | "Sea Surface Temperature (70S-50S)" | "degC"  | "(if                     lat[d=2] le -50 then mask[k=1,d=2]*area[d=2])"
+ sosaline_70N_90N | "sosaline"  | ORCA2.3_grid.nc | "(sosaline[d=1])" | "Sea Surface Salinity (70N-90N)"    | "PSU"   | "(if lat[d=2] ge  70                     then mask[k=1,d=2]*area[d=2])"
+ sosaline_50N_70N | "sosaline"  | ORCA2.3_grid.nc | "(sosaline[d=1])" | "Sea Surface Salinity (50N-70N)"    | "PSU"   | "(if lat[d=2] ge  50 and lat[d=2] le  70 then mask[k=1,d=2]*area[d=2])"
+ sosaline_30N_50N | "sosaline"  | ORCA2.3_grid.nc | "(sosaline[d=1])" | "Sea Surface Salinity (30N-50N)"    | "PSU"   | "(if lat[d=2] ge  30 and lat[d=2] le  50 then mask[k=1,d=2]*area[d=2])"
+ sosaline_10N_30N | "sosaline"  | ORCA2.3_grid.nc | "(sosaline[d=1])" | "Sea Surface Salinity (10N-30N)"    | "PSU"   | "(if lat[d=2] ge  10 and lat[d=2] le  30 then mask[k=1,d=2]*area[d=2])"
+ sosaline_10S_10N | "sosaline"  | ORCA2.3_grid.nc | "(sosaline[d=1])" | "Sea Surface Salinity (10S-10N)"    | "PSU"   | "(if lat[d=2] ge -10 and lat[d=2] le  10 then mask[k=1,d=2]*area[d=2])"
+ sosaline_30S_10S | "sosaline"  | ORCA2.3_grid.nc | "(sosaline[d=1])" | "Sea Surface Salinity (30S-10S)"    | "PSU"   | "(if lat[d=2] ge -30 and lat[d=2] le -10 then mask[k=1,d=2]*area[d=2])"
+ sosaline_50S_30S | "sosaline"  | ORCA2.3_grid.nc | "(sosaline[d=1])" | "Sea Surface Salinity (50S-30S)"    | "PSU"   | "(if lat[d=2] ge -50 and lat[d=2] le -30 then mask[k=1,d=2]*area[d=2])"
+ sosaline_70S_50S | "sosaline"  | ORCA2.3_grid.nc | "(sosaline[d=1])" | "Sea Surface Salinity (70S-50S)"    | "PSU"   | "(if                     lat[d=2] le -50 then mask[k=1,d=2]*area[d=2])"
+#-----------------------------------------------------------------------------------------------------------------
Index: CMIP6/DAMIP/CM61-LR-hist-stratO3-03.2150/POST/monitoring01_opa9_ORCA1.cfg
===================================================================
--- CMIP6/DAMIP/CM61-LR-hist-stratO3-03.2150/POST/monitoring01_opa9_ORCA1.cfg	(revision 4131)
+++ CMIP6/DAMIP/CM61-LR-hist-stratO3-03.2150/POST/monitoring01_opa9_ORCA1.cfg	(revision 4131)
@@ -0,0 +1,97 @@
+1#**************************************************************
+# Author: Patrick Brockmann
+# Contact: Patrick.Brockmann@cea.fr
+# $Date: 2009/05/14 15:09:35 $
+# $Name: ATLAS_608_1_5 $
+# $Revision: 1.1.1.1 $
+# History:
+# Modification:
+#**************************************************************
+
+##################################################################################################################
+#-----------------------------------------------------------------------------------------------------------------
+#  field | files patterns | files additionnal | operations | title | units | calcul of area
+#-----------------------------------------------------------------------------------------------------------------
+#
+#   field = name of the field to monitore 
+#   files patterns = pattern of the files used to monitore the field (must be discriminant) 
+#   files additionnal = additionnal files accessible by $FER_DATA
+#   operations = operations to calculate the field 
+#   title = variable title
+#   units = variable units
+#   calcul of area = expression to use for the weight average
+#
+# Notes:
+#   - Comment lines begin by '#' character
+#   - Separator between fields is '|' character
+#   - Operations must use the ferret syntax
+#   - Each variable must be referenced to its dataset ie var[d=x]
+#   - files patterns, operations,title,units must be enclosed with character '"'
+#   - fields will be presented through an html page with thumbnails global, north, south, land, ocean.
+#     Use a field name with one of these pattern to display it under the corresponding thumbnail.
+#
+##################################################################################################################
+
+color=6D80FF
+smooth=12
+#-----------------------------------------------------------------------------------------------------------------
+#  field | files patterns | files additionnal | operations | title | units | calcul of area
+#-----------------------------------------------------------------------------------------------------------------
+ sosstsst_global_prio | "tos"      | eORCA1.2_grid.nc | "(tos[d=1])"                                         | "Sea Surface Temperature (GLOBAL)" | "degC"  | "mask[k=1,d=2]*area[d=2]"
+ sosaline_global  | "sos"      | eORCA1.2_grid.nc | "(sos[d=1])"                                         | "Sea Surface Salinity (GLOBAL)"    | "PSU"   | "mask[k=1,d=2]*area[d=2]"
+ sossheig_global  | "zos"      | eORCA1.2_grid.nc | "(zos[d=1])"                                         | "Sea Surface Heigh (GLOBAL)"       | "m"     | "mask[k=1,d=2]*area[d=2]"
+ sohefldo_global  | "nshfls rsntds" | eORCA1.2_grid.nc | "(nshfls[d=1]+rsntds[d=2])"                     | "Net Downward Heat Flux (GLOBAL)"  | "W/m^2" | "mask[k=1,d=3]*area[d=3]"
+ somxl010_north   | "mldr10_1" | eORCA1.2_grid.nc | "(mldr10_1[d=1])" | "Mixed layer depth (NORTH)"      | "m"     | "(if lat[d=2] gt 0 then mask[k=1,d=2]*area[d=2])"
+ somxl010_south   | "mldr10_1" | eORCA1.2_grid.nc | "(mldr10_1[d=1])" | "Mixed layer depth (SOUTH)"      | "m"     | "(if lat[d=2] lt 0 then mask[k=1,d=2]*area[d=2])"
+ somxl010_SubpolarNorthAtl   | "mldr10_1" | eORCA1.2_grid.nc | "(mldr10_1[d=1,i=262:300,j=260:281])"       | "Mixed layer depth (Subpolar North Atlantic, annual Max)" | "m"     | "mask[k=1,d=2,i=262:300,j=260:281]*area[d=2,i=262:300,j=260:281]" | "@SMX:12" 
+ somxl010_Labrador   | "mldr10_1" | eORCA1.2_grid.nc | "(mldr10_1[d=1,i=228:248,j=265:288])"               | "Mixed layer depth (Labrador Sea, Annual Max)"            | "m"     | "mask[k=1,d=2,i=228:248,j=265:288]*area[d=2,i=228:248,j=265:288]" | "@SMX:12" 
+ somxl010_Barents    | "mldr10_1" | eORCA1.2_grid.nc | "(mldr10_1[d=1,i=272:295,j=313:330])"               | "Mixed layer depth (Barents Sea, Annual Max)"             | "m"     | "mask[k=1,d=2,i=272:295,j=313:330]*area[d=2,i=272:295,j=313:330]" | "@SMX:12" 
+ somxl010_Irminger   | "mldr10_1" | eORCA1.2_grid.nc | "(mldr10_1[d=1,i=248:268,j=272:285])"               | "Mixed layer depth (Irminger Sea, Annual Max)"            | "m"     | "mask[k=1,d=2,i=248:268,j=272:285]*area[d=2,i=248:268,j=272:285]" | "@SMX:12" 
+ somxl010_NordicSeas | "mldr10_1" | eORCA1.2_grid.nc | "(mldr10_1[d=1,i=262:300,j=284:313])"               | "Mixed layer depth (Nordic Seas, Annual Max)"             | "m"     | "mask[k=1,d=2,i=262:300,j=284:313]*area[d=2,i=262:300,j=284:313]" | "@SMX:12" 
+ somxl010_Rockall    | "mldr10_1" | eORCA1.2_grid.nc | "(mldr10_1[d=1,i=262:300,j=284:313])"               | "Mixed layer depth (Rockall, Annual Max)"                 | "m"     | "mask[k=1,d=2,i=262:300,j=284:313]*area[d=2,i=262:300,j=284:313]" | "@SMX:12"
+ friver_global    | "friver"   | eORCA1.2_grid.nc | "(friver[d=1])"                                      | "River input" | "kg/s"  | "mask[k=1,d=2]*area[d=2]"
+ friver_int       | "friver"   | eORCA1.2_grid.nc | "(friver[d=1]*mask[k=1,d=2]*area[d=2]*1E-9)"                                                                                        | "River input"             | "Sv"  | "2"
+ friver_coastal   | "friver"   | eORCA1.2_grid.nc | "(if missing(maskdraw[k=1,d=2],0.1) ne missing(maskdraw[i=@sbx,j=@sbx,k=1,d=2],0.1) then mask[d=2,k=1]*area[d=2]*friver[d=1]*1E-9)" | "Coastal river input"     | "Sv"  | "2"
+ friver_noncoastal| "friver"   | eORCA1.2_grid.nc | "(if missing(maskdraw[k=1,d=2],0.1) eq missing(maskdraw[i=@sbx,j=@sbx,k=1,d=2],0.1) then mask[d=2,k=1]*area[d=2]*friver[d=1]*1E-9)" | "Non coastal river input" | "Sv"  | "2"
+ friver_background| "friver"   | eORCA1.2_grid.nc | "(mask[k=1,d=2]*area[d=2]*friver[d=1,i=140,j=190]*1E-9)"                                                                            | "Runoff correction (conservation)" | "Sv"  | "2"
+ sosstsst_70N_90N | "tos"      | eORCA1.2_grid.nc | "(tos[d=1])"   | "Sea Surface Temperature (70N-90N)" | "degC"  | "(if lat[d=2] ge  70                     then mask[k=1,d=2]*area[d=2])"
+ sosstsst_50N_70N | "tos"      | eORCA1.2_grid.nc | "(tos[d=1])"   | "Sea Surface Temperature (50N-70N)" | "degC"  | "(if lat[d=2] ge  50 and lat[d=2] le  70 then mask[k=1,d=2]*area[d=2])"
+ sosstsst_30N_50N | "tos"      | eORCA1.2_grid.nc | "(tos[d=1])"   | "Sea Surface Temperature (30N-50N)" | "degC"  | "(if lat[d=2] ge  30 and lat[d=2] le  50 then mask[k=1,d=2]*area[d=2])"
+ sosstsst_10N_30N | "tos"      | eORCA1.2_grid.nc | "(tos[d=1])"   | "Sea Surface Temperature (10N-30N)" | "degC"  | "(if lat[d=2] ge  10 and lat[d=2] le  30 then mask[k=1,d=2]*area[d=2])"
+ sosstsst_10S_10N | "tos"      | eORCA1.2_grid.nc | "(tos[d=1])"   | "Sea Surface Temperature (10S-10N)" | "degC"  | "(if lat[d=2] ge -10 and lat[d=2] le  10 then mask[k=1,d=2]*area[d=2])"
+ sosstsst_30S_10S | "tos"      | eORCA1.2_grid.nc | "(tos[d=1])"   | "Sea Surface Temperature (30S-10S)" | "degC"  | "(if lat[d=2] ge -30 and lat[d=2] le -10 then mask[k=1,d=2]*area[d=2])"
+ sosstsst_50S_30S | "tos"      | eORCA1.2_grid.nc | "(tos[d=1])"   | "Sea Surface Temperature (50S-30S)" | "degC"  | "(if lat[d=2] ge -50 and lat[d=2] le -30 then mask[k=1,d=2]*area[d=2])"
+ sosstsst_70S_50S | "tos"      | eORCA1.2_grid.nc | "(tos[d=1])"   | "Sea Surface Temperature (70S-50S)" | "degC"  | "(if                     lat[d=2] le -50 then mask[k=1,d=2]*area[d=2])"
+ sosstsst_50S_50N_prio | "tos"      | eORCA1.2_grid.nc | "(tos[d=1])"   | "Sea Surface Temperature (50S-50N)" | "degC"  | "(if lat[d=2] ge -50 and lat[d=2] le  50 then mask[k=1,d=2]*area[d=2])"
+ sosaline_70N_90N | "sos"      | eORCA1.2_grid.nc | "(sos[d=1])"   | "Sea Surface Salinity (70N-90N)"    | "PSU"   | "(if lat[d=2] ge  70                     then mask[k=1,d=2]*area[d=2])"
+ sosaline_50N_70N | "sos"      | eORCA1.2_grid.nc | "(sos[d=1])"   | "Sea Surface Salinity (50N-70N)"    | "PSU"   | "(if lat[d=2] ge  50 and lat[d=2] le  70 then mask[k=1,d=2]*area[d=2])"
+ sosaline_30N_50N | "sos"      | eORCA1.2_grid.nc | "(sos[d=1])"   | "Sea Surface Salinity (30N-50N)"    | "PSU"   | "(if lat[d=2] ge  30 and lat[d=2] le  50 then mask[k=1,d=2]*area[d=2])"
+ sosaline_10N_30N | "sos"      | eORCA1.2_grid.nc | "(sos[d=1])"   | "Sea Surface Salinity (10N-30N)"    | "PSU"   | "(if lat[d=2] ge  10 and lat[d=2] le  30 then mask[k=1,d=2]*area[d=2])"
+ sosaline_10S_10N | "sos"      | eORCA1.2_grid.nc | "(sos[d=1])"   | "Sea Surface Salinity (10S-10N)"    | "PSU"   | "(if lat[d=2] ge -10 and lat[d=2] le  10 then mask[k=1,d=2]*area[d=2])"
+ sosaline_30S_10S | "sos"      | eORCA1.2_grid.nc | "(sos[d=1])"   | "Sea Surface Salinity (30S-10S)"    | "PSU"   | "(if lat[d=2] ge -30 and lat[d=2] le -10 then mask[k=1,d=2]*area[d=2])"
+ sosaline_50S_30S | "sos"      | eORCA1.2_grid.nc | "(sos[d=1])"   | "Sea Surface Salinity (50S-30S)"    | "PSU"   | "(if lat[d=2] ge -50 and lat[d=2] le -30 then mask[k=1,d=2]*area[d=2])"
+ sosaline_70S_50S | "sos"      | eORCA1.2_grid.nc | "(sos[d=1])"   | "Sea Surface Salinity (70S-50S)"    | "PSU"   | "(if                     lat[d=2] le -50 then mask[k=1,d=2]*area[d=2])"
+ hc300_global     | "hc300"    | eORCA1.2_grid.nc | "(hc300[d=1])" | "Heat content 0-300m (GLOBAL)"      | "J/m2"  | "mask[k=1,d=2]*area[d=2]"
+ wfo_global       | "wfo"      | eORCA1.2_grid.nc | "(wfo[d=1])"   | "Water flux (GLOBAL)"               | "kg/m2/s"  | "mask[k=1,d=2]*area[d=2]"
+ nadw_ocean_prio       | "zomsfatl" |       ""         | "(zomsfatl[z=500:6000@max,J=212:266@max,d=1])"       | "North Atlantic Deep Water"        | "Sv"    | "1"
+ npdw_ocean       | "zomsfpac" |       ""         | "(zomsfpac[z=500:6000@max,J=212:266@max,d=1])"       | "North Pacific Deep Water"         | "Sv"    | "1"
+ aabw_ocean       | "zomsfglo" |       ""         | "(zomsfglo[z=2000:6000@max,J=115:274@max,d=1])"      | "Antarctic Bottom Water"           | "Sv"    | "1"
+ deacon_ocean     | "zomsfglo" |       ""         | "(zomsfglo[z=2000:6000@max,J=31:140@max,d=1])"       | "Deacon Cell"                      | "Sv"    | "1"
+ thetao_0100m     | "thetao"   | eORCA1.2_grid.nc | "(thetao[d=1,k=24])" | "Sea Water Temperature @100m"  | "degC" |  "mask[k=24,d=2]*area[d=2]" 
+ thetao_0200m     | "thetao"   | eORCA1.2_grid.nc | "(thetao[d=1,k=31])" | "Sea Water Temperature @200m"  | "degC" |  "mask[k=31,d=2]*area[d=2]" 
+ thetao_0500m     | "thetao"   | eORCA1.2_grid.nc | "(thetao[d=1,k=40])" | "Sea Water Temperature @500m"  | "degC" |  "mask[k=40,d=2]*area[d=2]" 
+ thetao_1000m_prio     | "thetao"   | eORCA1.2_grid.nc | "(thetao[d=1,k=47])" | "Sea Water Temperature @1000m" | "degC" |  "mask[k=47,d=2]*area[d=2]" 
+ thetao_2000m     | "thetao"   | eORCA1.2_grid.nc | "(thetao[d=1,k=54])" | "Sea Water temperature @2000m" | "degC" |  "mask[k=54,d=2]*area[d=2]" 
+ thetao_3000m     | "thetao"   | eORCA1.2_grid.nc | "(thetao[d=1,k=60])" | "Sea Water Temperature @3000m" | "degC" |  "mask[k=60,d=2]*area[d=2]" 
+ thetao_4000m     | "thetao"   | eORCA1.2_grid.nc | "(thetao[d=1,k=66])" | "Sea Water Temperature @4000m" | "degC" |  "mask[k=66,d=2]*area[d=2]"
+ so_0100m         | "so"       | eORCA1.2_grid.nc | "(so[d=1,k=24])"     | "Sea Water Salinity @100m"     | "PSU"  |  "mask[k=24,d=2]*area[d=2]" 
+ so_0200m         | "so"       | eORCA1.2_grid.nc | "(so[d=1,k=31])"     | "Sea Water Salinity @200m"     | "PSU"  |  "mask[k=31,d=2]*area[d=2]" 
+ so_0500m         | "so"       | eORCA1.2_grid.nc | "(so[d=1,k=40])"     | "Sea Water Salinity @500m"     | "PSU"  |  "mask[k=40,d=2]*area[d=2]" 
+ so_1000m         | "so"       | eORCA1.2_grid.nc | "(so[d=1,k=47])"     | "Sea Water Salinity @1000m"    | "PSU"  |  "mask[k=47,d=2]*area[d=2]" 
+ so_2000m         | "so"       | eORCA1.2_grid.nc | "(so[d=1,k=54])"     | "Sea Water Salinity @2000m"    | "PSU"  |  "mask[k=54,d=2]*area[d=2]" 
+ so_3000m         | "so"       | eORCA1.2_grid.nc | "(so[d=1,k=60])"     | "Sea Water Salinity @3000m"    | "PSU"  |  "mask[k=60,d=2]*area[d=2]" 
+ so_4000m         | "so"       | eORCA1.2_grid.nc | "(so[d=1,k=66])"     | "Sea Water Salinity @4000m"    | "PSU"  |  "mask[k=66,d=2]*area[d=2]"
+ hc_ocean         | "scvoltot sctemtot" |       ""   | "(scvoltot[d=1]*sctemtot[d=2]*1026.*3991.86795711963/5.1011127E+14)"     | "ocean heat content"                 | "J/m2"    | "1"
+ hc_ice           | "ibgheat_tot"       |       ""   | "ibgheat_tot[d=1]*1.e20/5.1011127E+14"                                   | "ocean sea ice heat content"         | "J/m2"    | "1"
+ hc_snow          | "sbgheat_tot"       |       ""   | "sbgheat_tot[d=1]*1.e20/5.1011127E+14"                                   | "ocean snow on sea ice heat content" | "J/m2"    | "1"
+#-----------------------------------------------------------------------------------------------------------------
Index: CMIP6/DAMIP/CM61-LR-hist-stratO3-03.2150/POST/monitoring01_opa9_ORCA2.cfg
===================================================================
--- CMIP6/DAMIP/CM61-LR-hist-stratO3-03.2150/POST/monitoring01_opa9_ORCA2.cfg	(revision 4131)
+++ CMIP6/DAMIP/CM61-LR-hist-stratO3-03.2150/POST/monitoring01_opa9_ORCA2.cfg	(revision 4131)
@@ -0,0 +1,83 @@
+#**************************************************************
+# Author: Patrick Brockmann
+# Contact: Patrick.Brockmann@cea.fr
+# $Date: 2009/05/14 15:09:35 $
+# $Name: ATLAS_608_1_5 $
+# $Revision: 1.1.1.1 $
+# History:
+# Modification:
+#**************************************************************
+
+##################################################################################################################
+#-----------------------------------------------------------------------------------------------------------------
+#  field | files patterns | files additionnal | operations | title | units | calcul of area
+#-----------------------------------------------------------------------------------------------------------------
+#
+#   field = name of the field to monitore 
+#   files patterns = pattern of the files used to monitore the field (must be discriminant) 
+#   files additionnal = additionnal files accessible by $FER_DATA
+#   operations = operations to calculate the field 
+#   title = variable title
+#   units = variable units
+#   calcul of area = expression to use for the weight average
+#
+# Notes:
+#   - Comment lines begin by '#' character
+#   - Separator between fields is '|' character
+#   - Operations must use the ferret syntax
+#   - Each variable must be referenced to its dataset ie var[D=x]
+#   - files patterns, operations,title,units must be enclosed with character '"'
+#   - fields will be presented through an html page with thumbnails global, north, south, land, ocean.
+#     Use a field name with one of these pattern to display it under the corresponding thumbnail.
+#
+##################################################################################################################
+
+color=6D80FF
+smooth=12
+#-----------------------------------------------------------------------------------------------------------------
+#  field | files patterns | files additionnal | operations | title | units | calcul of area
+#-----------------------------------------------------------------------------------------------------------------
+ sosstsst_global     | "tos"       | ORCA2.3_grid.nc | "(tos[D=1])"                                       | "Sea Surface Temperature (Global)" | "degC"    | "mask[K=1,D=2]*area[D=2]"
+ sosaline_global     | "sos"       | ORCA2.3_grid.nc | "(sos[D=1])"                                       | "Sea Surface Salinity (Global)"    | "PSU"     | "mask[K=1,D=2]*area[D=2]"
+ sossheig_global     | "zos"       | ORCA2.3_grid.nc | "(zos[D=1])"                                       | "Sea Surface Heigh (Global)"       | "m"       | "mask[K=1,D=2]*area[D=2]"
+ wfo_global          | "wfo"       | ORCA2.3_grid.nc | "(wfo[D=1])"                                       | "Total Water flux (Global, upward)"| "kg/m2/s" | "mask[K=1,D=2]*area[D=2]"
+ friver_global       | "friver"    | ORCA2.3_grid.nc | "(friver[D=1])"                                    | "River input (Global)"             | "kg/m2/s" | "mask[K=1,D=2]*area[D=2]"
+ friver_int          | "friver"    | ORCA2.3_grid.nc | "(friver[d=1]*mask[k=1,d=2]*area[d=2]*1E-9)"                                                                                    | "River input"             | "Sv"  | "2"
+ friver_coastal      | "friver"    | ORCA2.3_grid.nc | "(if missing(maskdraw[k=1,d=2],0.1) ne missing(maskdraw[i=@sbx,j=@sbx,k=1,d=2],0.1) then mask[k=1]*area[d=2]*friver[d=1]*1E-9)" | "Coastal river input"     | "Sv"  | "2"
+ friver_noncoastal   | "friver"    | ORCA2.3_grid.nc | "(if missing(maskdraw[k=1,d=2],0.1) eq missing(maskdraw[i=@sbx,j=@sbx,k=1,d=2],0.1) then mask[k=1]*area[d=2]*friver[d=1]*1E-9)" | "Non coastal river input" | "Sv"  | "2"
+ hc300_global        | "hc300"     | ORCA2.3_grid.nc | "(hc300[D=1])"                                     | "Heat content 300 m (Global)"      | "W"       | "mask[K=1,D=2]*area[D=2]"
+ sohefldo_global     | "sohefldo"  | ORCA2.3_grid.nc | "(nshfls[D=1]+rsntds[D=1])"                        | "Net Downward Heat Flux (Global)"  | "W/m^2"   | "mask[K=1,D=2]*area[D=2]"
+ nadw_ocean          | "zomsfatl"  |       ""        | "(zomsfatl[Z=500:6000@MAX,J=90:120@MAX,D=1])"      | "North Atlantic Deep Water"        | "Sv"      | "1"
+ npdw_ocean          | "zomsfpac"  |       ""        | "(zomsfpac[Z=500:6000@MAX,J=90:120@MAX,D=1])"      | "North Pacific Deep Water"         | "Sv"      | "1"
+ aabw_ocean          | "zomsfglo"  |       ""        | "(zomsfglo[Z=2000:6000@MAX,J=37:118@MAX,D=1])"     | "Antarctic Bottom Water"           | "Sv"      | "1"
+ deacon_ocean        | "zomsfglo"  |       ""        | "(zomsfglo[Z=2000:6000@MAX,J=2:50@MAX,D=1])"       | "Deacon Cell"                      | "Sv"      | "1"
+ somxl010_north      | "mldr10_1"  | ORCA2.3_grid.nc | "(mldr10_1[D=1])" | "Mixed layer depth (North)"    | "m"     | "(IF lat[D=2] GT 0 THEN mask[K=1,D=2]*area[D=2])"
+ somxl010_south      | "mldr10_1"  | ORCA2.3_grid.nc | "(mldr10_1[D=1])" | "Mixed layer depth (South)"    | "m"     | "(IF lat[D=2] LT 0 THEN mask[K=1,D=2]*area[D=2])"
+ temp_500m_global    | "thetao"    | ORCA2.3_grid.nc | "(thetao[D=1,K=20])"                               | "Temperature at 500m (Global)"     | "degC"    | "mask[K=20,D=2]*area[D=2]"
+ temp_1000m_global   | "thetao"    | ORCA2.3_grid.nc | "(thetao[D=1,K=22])"                               | "Temperature at 1000m (Global)"    | "degC"    | "mask[K=22,D=2]*area[D=2]"
+ temp_2000m_global   | "thetao"    | ORCA2.3_grid.nc | "(thetao[D=1,K=24:25@AVE])"                        | "Temperature at 2000m (Global)"    | "degC"    | "mask[K=25,D=2]*area[D=2]"
+ temp_3000m_global   | "thetao"    | ORCA2.3_grid.nc | "(thetao[D=1,K=26:27@AVE])"                        | "Temperature at 2000m (Global)"    | "degC"    | "mask[K=27,D=2]*area[D=2]"
+ temp_4000m_global   | "thetao"    | ORCA2.3_grid.nc | "(thetao[D=1,K=28:29@AVE])"                        | "Temperature at 4000m (Global)"    | "degC"    | "mask[K=29,D=2]*area[D=2]"
+ temp_5000m_global   | "thetao"    | ORCA2.3_grid.nc | "(thetao[D=1,K=30])"                               | "Temperature at 5000m (Global)"    | "degC"    | "mask[K=30,D=2]*area[D=2]"
+ salini_500m_global  | "so"        | ORCA2.3_grid.nc | "(so[D=1,K=20])"                                   | "Salinity at 500m (Global)"        | "PSU"     | "mask[K=20,D=2]*area[D=2]"
+ salini_1000m_global | "so"        | ORCA2.3_grid.nc | "(so[D=1,K=23])"                                   | "Salinity at 1000m (Global)"       | "PSU"     | "mask[K=23,D=2]*area[D=2]"
+ salini_2000m_global | "so"        | ORCA2.3_grid.nc | "(so[D=1,K=24:25@AVE])"                            | "Salinity at 2000m (Global)"       | "PSU"     | "mask[K=25,D=2]*area[D=2]"
+ salini_3000m_global | "so"        | ORCA2.3_grid.nc | "(so[D=1,K=26:27@AVE])"                            | "Salinity at 2000m (Global)"       | "PSU"     | "mask[K=27,D=2]*area[D=2]"
+ salini_4000m_global | "so"        | ORCA2.3_grid.nc | "(so[D=1,K=28:29@AVE])"                            | "Salinity at 4000m (Global)"       | "PSU"     | "mask[K=29,D=2]*area[D=2]"
+ salini_5000m_global | "so"        | ORCA2.3_grid.nc | "(so[D=1,K=30])"                                   | "Salinity at 5000m (Global)"       | "PSU"     | "mask[K=30,D=2]*area[D=2]"
+ sosstsst_70N_90N    | "tos"       | ORCA2.3_grid.nc | "(tos[D=1])" | "Sea Surface Temperature (70N-90N)" | "degC"  | "(IF lat[D=2] GE  70                     THEN mask[K=1,D=2]*area[D=2])"
+ sosstsst_50N_70N    | "tos"       | ORCA2.3_grid.nc | "(tos[D=1])" | "Sea Surface Temperature (50N-70N)" | "degC"  | "(IF lat[D=2] GE  50 AND lat[D=2] LE  70 THEN mask[K=1,D=2]*area[D=2])"
+ sosstsst_30N_50N    | "tos"       | ORCA2.3_grid.nc | "(tos[D=1])" | "Sea Surface Temperature (30N-50N)" | "degC"  | "(IF lat[D=2] GE  30 AND lat[D=2] LE  50 THEN mask[K=1,D=2]*area[D=2])"
+ sosstsst_10N_30N    | "tos"       | ORCA2.3_grid.nc | "(tos[D=1])" | "Sea Surface Temperature (10N-30N)" | "degC"  | "(IF lat[D=2] GE  10 AND lat[D=2] LE  30 THEN mask[K=1,D=2]*area[D=2])"
+ sosstsst_10S_10N    | "tos"       | ORCA2.3_grid.nc | "(tos[D=1])" | "Sea Surface Temperature (10S-10N)" | "degC"  | "(IF lat[D=2] GE -10 AND lat[D=2] LE  10 THEN mask[K=1,D=2]*area[D=2])"
+ sosstsst_30S_10S    | "tos"       | ORCA2.3_grid.nc | "(tos[D=1])" | "Sea Surface Temperature (30S-10S)" | "degC"  | "(IF lat[D=2] GE -30 AND lat[D=2] LE -10 THEN mask[K=1,D=2]*area[D=2])"
+ sosstsst_50S_30S    | "tos"       | ORCA2.3_grid.nc | "(tos[D=1])" | "Sea Surface Temperature (50S-30S)" | "degC"  | "(IF lat[D=2] GE -50 AND lat[D=2] LE -30 THEN mask[K=1,D=2]*area[D=2])"
+ sosstsst_70S_50S    | "tos"       | ORCA2.3_grid.nc | "(tos[D=1])" | "Sea Surface Temperature (70S-50S)" | "degC"  | "(IF                     lat[D=2] LE -50 THEN mask[K=1,D=2]*area[D=2])"
+ sosaline_70N_90N    | "sos"       | ORCA2.3_grid.nc | "(sos[D=1])" | "Sea Surface Salinity (70N-90N)"    | "PSU"   | "(IF lat[D=2] GE  70                     THEN mask[K=1,D=2]*area[D=2])"
+ sosaline_50N_70N    | "sos"       | ORCA2.3_grid.nc | "(sos[D=1])" | "Sea Surface Salinity (50N-70N)"    | "PSU"   | "(IF lat[D=2] GE  50 AND lat[D=2] LE  70 THEN mask[K=1,D=2]*area[D=2])"
+ sosaline_30N_50N    | "sos"       | ORCA2.3_grid.nc | "(sos[D=1])" | "Sea Surface Salinity (30N-50N)"    | "PSU"   | "(IF lat[D=2] GE  30 AND lat[D=2] LE  50 THEN mask[K=1,D=2]*area[D=2])"
+ sosaline_10N_30N    | "sos"       | ORCA2.3_grid.nc | "(sos[D=1])" | "Sea Surface Salinity (10N-30N)"    | "PSU"   | "(IF lat[D=2] GE  10 AND lat[D=2] LE  30 THEN mask[K=1,D=2]*area[D=2])"
+ sosaline_10S_10N    | "sos"       | ORCA2.3_grid.nc | "(sos[D=1])" | "Sea Surface Salinity (10S-10N)"    | "PSU"   | "(IF lat[D=2] GE -10 AND lat[D=2] LE  10 THEN mask[K=1,D=2]*area[D=2])"
+ sosaline_30S_10S    | "sos"       | ORCA2.3_grid.nc | "(sos[D=1])" | "Sea Surface Salinity (30S-10S)"    | "PSU"   | "(IF lat[D=2] GE -30 AND lat[D=2] LE -10 THEN mask[K=1,D=2]*area[D=2])"
+ sosaline_50S_30S    | "sos"       | ORCA2.3_grid.nc | "(sos[D=1])" | "Sea Surface Salinity (50S-30S)"    | "PSU"   | "(IF lat[D=2] GE -50 AND lat[D=2] LE -30 THEN mask[K=1,D=2]*area[D=2])"
+ sosaline_70S_50S    | "sos"       | ORCA2.3_grid.nc | "(sos[D=1])" | "Sea Surface Salinity (70S-50S)"    | "PSU"   | "(IF                     lat[D=2] LE -50 THEN mask[K=1,D=2]*area[D=2])"
Index: CMIP6/DAMIP/CM61-LR-hist-stratO3-03.2150/POST/monitoring01_orchidee.cfg
===================================================================
--- CMIP6/DAMIP/CM61-LR-hist-stratO3-03.2150/POST/monitoring01_orchidee.cfg	(revision 4131)
+++ CMIP6/DAMIP/CM61-LR-hist-stratO3-03.2150/POST/monitoring01_orchidee.cfg	(revision 4131)
@@ -0,0 +1,66 @@
+#**************************************************************
+# Author: Patrick Brockmann
+# Contact: Patrick.Brockmann@cea.fr
+# $Date: 2009/05/14 15:09:35 $
+# $Name: ATLAS_608_1_5 $
+# $Revision: 1.1.1.2 $
+# History:
+# Modification:
+#**************************************************************
+
+##################################################################################################################
+#-----------------------------------------------------------------------------------------------------------------
+#  field | files patterns | files additionnal | operations | title | units | calcul of area
+#-----------------------------------------------------------------------------------------------------------------
+#
+#   field = name of the field to monitore 
+#   files patterns = pattern of the files used to monitore the field (must be discriminant) 
+#   files additionnal = additionnal files accessible by $FER_DATA
+#   operations = operations to calculate the field 
+#   title = variable title
+#   units = variable units
+#   calcul of area = expression to use for the weight average
+#
+# Notes:
+#   - Comment lines begin by # character.
+#   - Separator between fields is | character.
+#   - Operations must use the ferret syntax, if several files are used precise with the syntax d=x to refer to the x dataset.
+#     They must be enclosed by parenthesis if more than one variable is used.
+#   - files patterns,files additionnal,operations,title,units must be enclosed with character ". 
+#     Use "" if empty.
+#   - Fields will be presented through an html page with thumbnails global, north, south, land, ocean.
+#     Use a field name with one of these pattern to display it under the corresponding thumbnail.
+#
+##################################################################################################################
+
+color=E7FFAB
+smooth=12
+#------------------------------------------------------------------------------------------------------------------------------------------------------
+#  field | files patterns | files additionnal | operations | title | units | calcul of area
+#------------------------------------------------------------------------------------------------------------------------------------------------------
+delta_water_stock | "nobiofrac DelSoilMoist_daily DelIntercept_daily DelSWE_daily delstock_routing" |  "" | "((1-nobiofrac[d=1,l=2:100000])*DelSoilMoist_daily[d=2,l=2:100000] + DelIntercept_daily[d=3,l=2:100000] + DelSWE_daily[d=4,l=2:100000] + delstock_routing[d=5,l=2:100000])" | "Change in total water stock (LANDS) " | "kg/day/m2 of land" | "Areas[d=2]*Contfrac[d=2]"
+water_budget_closure | "nobiofrac DelSoilMoist_daily DelIntercept_daily DelSWE_daily delstock_routing rain snowf evap riverflow coastalflow" | "" | "(((1-nobiofrac[d=1,l=2:100000])*DelSoilMoist_daily[d=2,l=2:100000] + DelIntercept_daily[d=3,l=2:100000] + DelSWE_daily[d=4,l=2:100000] +  delstock_routing[d=5,l=2:100000])*Areas[d=1]*Contfrac[d=1] -  ((rain[d=6,l=2:100000] + snowf[d=7,l=2:100000] - evap[d=8,l=2:100000])*Areas[d=1]*Contfrac[d=1]  - (riverflow[d=9,l=2:100000] + coastalflow[d=10,l=2:100000])*1000*86400 ))/(4*3.14*6370000*6370000*0.26)" | "Water budget closure (LANDS) " | "kg/day/m2 of land" | "2"
+twbr_lands       | "TWBR"             |  "" | "twbr[d=1,l=2:100000]*86400"       | "Hydrol water buget residu (LANDS)" | "kg/m^2/d" | "Areas[d=1]*Contfrac[d=1]"
+temp_sol_lands   | "temp_sol"         |  "" | "temp_sol[d=1]"                    | "TSOL (LANDS)"                      | "C"        | "Areas[d=1]*Contfrac[d=1]"
+fluxsens_lands   | "fluxsens"         |  "" | "fluxsens[d=1]"                    | "Sensible Flux (LANDS)"             | "W/m^2"    | "Areas[d=1]*Contfrac[d=1]"
+evap_lands       | "evap"             |  "" | "evap[d=1]"                        | "Evaporation (LANDS)"               | "mm/d"     | "Areas[d=1]*Contfrac[d=1]"
+evapnu_lands     | "evapnu"           |  "" | "evapnu[d=1]"                      | "Soil evaporation (LANDS)"          | "mm/d"     | "Areas[d=1]*Contfrac[d=1]"
+transpir_lands   | "transpir"         |  "" | "transpir[d=1,k=@sum]"             | "Transpiration (sum over all PFT, LANDS)" | "mm/d" | "Areas[d=1]*Contfrac[d=1]"
+subli_lands      | "subli"            |  "" | "subli[d=1]"                       | "Sublimation (LANDS)"               | "mm/d"     | "Areas[d=1]*Contfrac[d=1]"
+snow_swe_lands   | "frac_snow snow"   |  "" | "snow[d=2]"                        | "Snow Mass (LANDS)"                 | "kg/m^2"   | "Areas[d=2]*Contfrac[d=2]"
+snownobio_lands  | "snownobio"        |  "" | "snownobio[d=1]"                   | "Snow Other Surfaces (LANDS)"       | "kg/m^2"   | "Areas[d=1]*Contfrac[d=1]"
+snowf_lands      | "snowf"            |  "" | "snowf[d=1]"                       | "Snowfall (LANDS)"                  | "mm/d"     | "Areas[d=1]*Contfrac[d=1]"
+precip_lands     | "rain snowf"       |  "" | "rain[d=1] + snowf[d=2]"           | "Total precipitaion (LANDS)"        | "mm/d"     | "Areas[d=1]*Contfrac[d=1]"
+runoff_lands     | "runoff"           |  "" | "runoff[d=1]"                      | "Surface runoff  (LANDS)"           | "kg/m^2"   | "Areas[d=1]*Contfrac[d=1]"
+drainage_lands   | "drainage"         |  "" | "drainage[d=1]"                    | "Drainage  (LANDS)"                 | "kg/m^2"   | "Areas[d=1]*Contfrac[d=1]"
+humidity_lands   | "mrso"             |  "" | "mrso[d=1]"                        | "Total Soil Moisture  (LANDS)"      | "kg/m^2"   | "Areas[d=1]*Contfrac[d=1]"
+surface_humidity_lands | "mrsos"      |  "" | "mrsos[d=1]"                       | "Top 10cm soil moisture  (LANDS)"   | "kg/m^2"   | "Areas[d=1]*Contfrac[d=1]"
+albedo_lands     | "alb_vis alb_nir"  |  "" | "((alb_vis[d=1]+alb_nir[d=2])*0.5)"| "Mean Albedo (LANDS)"               | "1"        | "Areas[d=1]*Contfrac[d=1]"
+lai_lands        | "LAImean"          |  "" | "LAImean[d=1]"                     | "LAI (mean excluding PFT=1) (LANDS)"| "1"        | "Areas[d=1]*Contfrac[d=1]"
+nee_lands        | "nee maxvegetfrac" |  "" | "(nee[d=1]*365*86400*maxvegetfrac[d=2]*Areas[d=1]*Contfrac[d=1]/1e15)"   | "Net Ecosystem Exchange" | "PgC/yr" | "2"
+maxvegetagri_forcing | "maxvegetfrac" |  "" | "maxvegetfrac[d=1,K=12:13@sum]"    | "veget_max fraction of agriculture [sum of pft=12,13] "| "1"  | "Areas[d=1]*Contfrac[d=1]"
+maxvegetbare_forcing | "maxvegetfrac" |  "" | "maxvegetfrac[d=1,K=1]"            | "veget_max fraction on bare soil [pft=1] "             | "1"  | "Areas[d=1]*Contfrac[d=1]"
+vegetn_lands     | "vegetfrac"        |  "" | "vegetfrac[d=1,K=2:9@sum]"         | "veget trees[sum of pft=2:9] (LANDS)"                  | "1"  | "Areas[d=1]*Contfrac[d=1]"
+vegetg_lands     | "vegetfrac"        |  "" | "vegetfrac[d=1,K=10:11@sum]+vegetfrac[d=1,K=14:15@sum]"       | "veget natural grasses[sum of pft=10,11,14,15] (LANDS)"      | "1"  | "Areas[d=1]*Contfrac[d=1]"
+vegeta_lands     | "vegetfrac"        |  "" | "vegetfrac[d=1,K=12:13@sum]"       | "veget agriculture [sum of pft=12,13] (LANDS)"         | "1"  | "Areas[d=1]*Contfrac[d=1]"
+
Index: CMIP6/DAMIP/CM61-LR-hist-stratO3-03.2150/POST/monitoring01_pisces_ORCA1.cfg
===================================================================
--- CMIP6/DAMIP/CM61-LR-hist-stratO3-03.2150/POST/monitoring01_pisces_ORCA1.cfg	(revision 4131)
+++ CMIP6/DAMIP/CM61-LR-hist-stratO3-03.2150/POST/monitoring01_pisces_ORCA1.cfg	(revision 4131)
@@ -0,0 +1,51 @@
+#**************************************************************
+# Author: Patrick Brockmann
+# Contact: Patrick.Brockmann@cea.fr
+# $Date: 2011/09/12 12:17:53 $
+# $Name: ATLAS_672_1_1 $
+# $Revision: 1.1.1.1 $
+# History:
+# Modification:
+#**************************************************************
+
+##################################################################################################################
+#-----------------------------------------------------------------------------------------------------------------
+#  field | files patterns | files additionnal | operations | title | units | calcul of area
+#-----------------------------------------------------------------------------------------------------------------
+#
+#   field = name of the field to monitore 
+#   files patterns = pattern of the files used to monitore the field (must be discriminant) 
+#   files additionnal = additionnal files accessible by $FER_DATA
+#   operations = operations to calculate the field 
+#   title = variable title
+#   units = variable units
+#   calcul of area = expression to use for the weight average
+#
+# Notes:
+#   - Comment lines begin by # character.
+#   - Separator between fields is | character.
+#   - Operations must use the ferret syntax, if several files are used precise with the syntax d=x to refer to the x dataset.
+#     They must be enclosed by parenthesis if more than one variable is used.
+#   - files patterns,files additionnal,operations,title,units must be enclosed with character ". 
+#     Use "" if empty.
+#   - Fields will be presented through an html page with thumbnails global, north, south, land, ocean.
+#     Use a field name with one of these pattern to display it under the corresponding thumbnail.
+#
+##################################################################################################################
+
+color=D0F8E0
+smooth=12
+#-----------------------------------------------------------------------------------------------------------------
+#  field | files patterns | files additionnal  | operations | title | units | calcul of area
+#-----------------------------------------------------------------------------------------------------------------
+ no3_global     | "pno3tot"  |       ""   | "pno3tot[d=1]"  | "global mean nitrogen concentration"                  | "umolN"    | "1"
+ po4_global     | "ppo4tot"  |       ""   | "ppo4tot[d=1]"  | "global mean phosphorus concentration"                | "umolP"    | "1"
+ sil_global     | "psiltot"  |       ""   | "psiltot[d=1]"  | "global mean silicate concentration"                  | "umolC"    | "1"
+ fer_global     | "pfertot"  |       ""   | "pfertot[d=1]"  | "global mean iron concentration"                      | "nmolFe"   | "1"
+ alk_global     | "palktot"  |       ""   | "palktot[d=1]"  | "global mean alkalinity concentration"                | "umolC"    | "1"
+ cflx_global    | "tcflx"    |       ""   | "tcflx[d=1]"    | "total flux of Carbon out of the ocean"               | "PgC/yr"   | "1"
+ epc_global     | "tcexp"    |       ""   | "tcexp[d=1]"    | "total flux of Carbon export at 100m"                 | "PgC/yr"   | "1"
+ tintpp_global  | "tintpp"   |       ""   | "tintpp[d=1]"   | "global total integrated primary production"          | "PgC/yr"   | "1"
+ tdenit_global  | "tdenit"   |       ""   | "tdenit[d=1]"   | "Total denitrification"                               | "TgN/yr"   | "1"
+ tnfix_global   | "tnfix"    |       ""   | "tnfix[d=1]"    | "global total nitrogen fixation"                      | "TgN/yr"   | "1"
+#-----------------------------------------------------------------------------------------------------------------
Index: CMIP6/DAMIP/CM61-LR-hist-stratO3-03.2150/POST/monitoring01_pisces_ORCA2.cfg
===================================================================
--- CMIP6/DAMIP/CM61-LR-hist-stratO3-03.2150/POST/monitoring01_pisces_ORCA2.cfg	(revision 4131)
+++ CMIP6/DAMIP/CM61-LR-hist-stratO3-03.2150/POST/monitoring01_pisces_ORCA2.cfg	(revision 4131)
@@ -0,0 +1,49 @@
+#**************************************************************
+# Author: Patrick Brockmann
+# Contact: Patrick.Brockmann@cea.fr
+# $Date: 2011/09/12 12:17:53 $
+# $Name: ATLAS_672_1_1 $
+# $Revision: 1.1.1.1 $
+# History:
+# Modification:
+#**************************************************************
+
+##################################################################################################################
+#-----------------------------------------------------------------------------------------------------------------
+#  field | files patterns | files additionnal | operations | title | units | calcul of area
+#-----------------------------------------------------------------------------------------------------------------
+#
+#   field = name of the field to monitore 
+#   files patterns = pattern of the files used to monitore the field (must be discriminant) 
+#   files additionnal = additionnal files accessible by $FER_DATA
+#   operations = operations to calculate the field 
+#   title = variable title
+#   units = variable units
+#   calcul of area = expression to use for the weight average
+#
+# Notes:
+#   - Comment lines begin by # character.
+#   - Separator between fields is | character.
+#   - Operations must use the ferret syntax, if several files are used precise with the syntax d=x to refer to the x dataset.
+#     They must be enclosed by parenthesis if more than one variable is used.
+#   - files patterns,files additionnal,operations,title,units must be enclosed with character ". 
+#     Use "" if empty.
+#   - Fields will be presented through an html page with thumbnails global, north, south, land, ocean.
+#     Use a field name with one of these pattern to display it under the corresponding thumbnail.
+#
+##################################################################################################################
+
+color=D0F8E0
+smooth=12
+#-----------------------------------------------------------------------------------------------------------------
+#  field | files patterns | files additionnal  | operations | title | units | calcul of area
+#-----------------------------------------------------------------------------------------------------------------
+ no3_global  | "NO3"      | "ORCA2.3_grid.nc"  | "(NO3[d=1,k=1])"               | "Nitrate Concentration at surface"      | "mmol/m3"    | "mask[d=2,k=1]*area[d=2]"
+ dic_global  | "DIC"      | "ORCA2.3_grid.nc"  | "(DIC[d=1,k=1])"               | "DIC Concentration at surface"          | "mmol/m3"    | "mask[d=2,k=1]*area[d=2]"
+ alk_global  | "Alkalini" | "ORCA2.3_grid.nc"  | "(Alkalini[d=1,k=1])"          | "Alkalinity Concentration  at surface"  | "mmol/m3"    | "mask[d=2,k=1]*area[d=2]"
+ o2_global   | "O2"       | "ORCA2.3_grid.nc"  | "(O2[d=1,k=1])"                | "Oxygen Concentration at surface"       | "mmol/m3"    | "mask[d=2,k=1]*area[d=2]"
+ si_global   | "Si"       | "ORCA2.3_grid.nc"  | "(Si[d=1,k=1])"                | "Silicate Concentration at surface"     | "mmol/m3"    | "mask[d=2,k=1]*area[d=2]"
+ po4_global  | "PO4"      | "ORCA2.3_grid.nc"  | "(PO4[d=1,k=1])"               | "Phosphorus Concentration  at surface"  | "mmol/m3"    | "mask[d=2,k=1]*area[d=2]"
+ cflx_global | "Cflx"     | "ORCA2.3_grid.nc"  | "(Cflx[d=1]*3600*24*365*12)"   | "Ocean carbon flux (GLOBAL)"            | "gC/m2/yr"   | "mask[k=1,d=2]*area[d=2]"
+ epc_global  | "EPC100"   | "ORCA2.3_grid.nc"  | "(EPC100[d=1]*3600*24*365*12)" | "Carbon export at 100m (GLOBAL)"        | "gC/m2/yr"   | "mask[k=1,d=2]*area[d=2]"
+#-----------------------------------------------------------------------------------------------------------------
Index: CMIP6/DAMIP/CM61-LR-hist-stratO3-03.2150/POST/monitoring01_stomate.cfg
===================================================================
--- CMIP6/DAMIP/CM61-LR-hist-stratO3-03.2150/POST/monitoring01_stomate.cfg	(revision 4131)
+++ CMIP6/DAMIP/CM61-LR-hist-stratO3-03.2150/POST/monitoring01_stomate.cfg	(revision 4131)
@@ -0,0 +1,85 @@
+#**************************************************************
+# Author: Patrick Brockmann
+# Contact: Patrick.Brockmann@cea.fr
+# $Date: 2009/05/14 15:09:35 $
+# $Name: ATLAS_608_1_5 $
+# $Revision: 1.1.1.2 $
+# History:
+# Modification:
+#**************************************************************
+
+##################################################################################################################
+#-----------------------------------------------------------------------------------------------------------------
+#  field | files patterns | files additionnal | operations | title | units | calcul of area
+#-----------------------------------------------------------------------------------------------------------------
+#
+#   field = name of the field to monitore 
+#   files patterns = pattern of the files used to monitore the field (must be discriminant) 
+#   files additionnal = additionnal files accessible by $FER_DATA
+#   operations = operations to calculate the field 
+#   title = variable title
+#   units = variable units
+#   calcul of area = expression to use for the weight average
+#
+# Notes:
+#   - Comment lines begin by # character.
+#   - Separator between fields is | character.
+#   - Operations must use the ferret syntax, if several files are used precise with the syntax d=x to refer to the x dataset.
+#     They must be enclosed by parenthesis if more than one variable is used.
+#   - files patterns,files additionnal,operations,title,units must be enclosed with character ". 
+#     Use "" if empty.
+#   - Fields will be presented through an html page with thumbnails global, north, south, land, ocean.
+#     Use a field name with one of these pattern to display it under the corresponding thumbnail.
+#
+##################################################################################################################
+
+color=EEE8AA
+smooth=12
+#------------------------------------------------------------------------------------------------------------------------------------------------------
+#  field | files patterns | files additionnal | operations | title | units | calcul of area
+#------------------------------------------------------------------------------------------------------------------------------------------------------
+woodharvest_fromforcing| "WOOD_HARVEST_PFT VEGET_COV_MAX"| "" | "(WOOD_HARVEST_PFT[d=1]*VEGET_COV_MAX[d=2]*AREAS[d=1]*CONTFRAC[d=1]*365/1e15)"| "Wood harvest read from file and prepared to be used"      | "PgC/yr"    | "2"
+fwoodharvest_lands     | "fWoodharvest"                  | "" | "fWoodharvest[d=1]*AREAS[d=1]*CONTFRAC[d=1]*86400*365*1000/1e15"              | "CO2 Flux from wood harvesting, positive from atm to land" | "PgC/yr"    | "2"
+fLuc_fHarvest_lands    | "CONVFLUX CFLUX_PROD10 CFLUX_PROD100 HARVEST_ABOVE"  | "" | "((CONVFLUX[d=1]+CFLUX_PROD10[d=2]+CFLUX_PROD100[d=3]+HARVEST_ABOVE[d=4])*AREAS[d=1]*CONTFRAC[d=1]*365/1e15)" | "CO2 flux from Land Use Change and Crop Harvesting" | "PgC/yr" | "2"
+fHarvest_lands         | "HARVEST_ABOVE"                 | "" | "((HARVEST_ABOVE[d=1])*AREAS[d=1]*CONTFRAC[d=1]*365/1e15)"                    | "CO2 flux from Land Use Change and Crop Harvesting"        | "PgC/yr" | "2"
+nbp_lands              | "nbp"                           | "" | "(nbp[d=1]*AREAS[d=1]*CONTFRAC[d=1]*86400*365/1e12)"                          | "Net Biospheric Production"                                | "PgC/yr" | "2"
+cSoil_lands            | "TOTAL_SOIL_CARB VEGET_COV_MAX" | "" | "(TOTAL_SOIL_CARB[d=1]*VEGET_COV_MAX[d=2]*AREAS[d=1]*CONTFRAC[d=1]/1e15)"     | "Carbon Soil in Pool"                                      | "PgC"    | "2"
+cVeg_lands             | "TOTAL_M VEGET_COV_MAX"         | "" | "(TOTAL_M[d=1]*VEGET_COV_MAX[d=2]*AREAS[d=1]*CONTFRAC[d=1]/1e15)"             | "Carbon in vegetation"                                     | "PgC"    | "2"
+npp_lands              | "NPP VEGET_COV_MAX"             | "" | "(NPP[d=1]*365*VEGET_COV_MAX[d=2]*AREAS[d=1]*CONTFRAC[d=1]/1e15)"             | "Net Primary Production"                                   | "PgC/yr" | "2"
+rh_lands               | "HET_RESP VEGET_COV_MAX"        | "" | "(HET_RESP[d=1]*365*VEGET_COV_MAX[d=2]*AREAS[d=1]*CONTFRAC[d=1]/1e15)"        | "Heterotrophic Respiration"                                | "PgC/yr" | "2"
+CONVFLUX_lands         | "CONVFLUX"                      | "" | "(CONVFLUX[d=1]*365*AREAS[d=1]*CONTFRAC[d=1]/1e15)"                   | "Annual release right after deforestation (LANDS)"            | "PgC/yr" | "2"
+CFLUX_PROD10_lands     | "CFLUX_PROD10"                  | "" | "(CFLUX_PROD10[d=1]*365*AREAS[d=1]*CONTFRAC[d=1]/1e15)"               | "Annual release from all 10 year wood product pools (LANDS)"  | "PgC/yr" | "2"
+CFLUX_PROD100_lands    | "CFLUX_PROD100"                 | "" | "(CFLUX_PROD100[d=1]*365*AREAS[d=1]*CONTFRAC[d=1]/1e15)"              | "Annual release from all 100 year wood product pools (LANDS)" | "PgC/yr" | "2"
+BIOMASS_lands          | "TOTAL_M VEGET_COV_MAX"         | "" | "(TOTAL_M[d=1]*VEGET_COV_MAX[d=2]*AREAS[d=1]*CONTFRAC[d=1]/1e15)"             | "Total Biomass (LANDS)"                               | "PgC"    | "2"
+LITTER_lands           | "TOTAL_BM_LITTER VEGET_COV_MAX" | "" | "(TOTAL_BM_LITTER[d=1]*365*VEGET_COV_MAX[d=2]*AREAS[d=1]*CONTFRAC[d=1]/1e15)" | "Biomass to Litter flux (LANDS)"                      | "PgC/yr" | "2"
+GPP_lands              | "GPP VEGET_COV_MAX"             | "" | "(GPP[d=1]*365*VEGET_COV_MAX[d=2]*AREAS[d=1]*CONTFRAC[d=1]/1e15)"             | "Gross Primary Produc (LANDS)"                        | "PgC/yr" | "2"
+MAINT_RESP_lands       | "MAINT_RESP VEGET_COV_MAX"      | "" | "(MAINT_RESP[d=1]*365*VEGET_COV_MAX[d=2]*AREAS[d=1]*CONTFRAC[d=1]/1e15)"      | "Maintenance Resp. (LANDS)"                           | "PgC/yr" | "2"
+GROWTH_RESP_lands      | "GROWTH_RESP VEGET_COV_MAX"     | "" | "(GROWTH_RESP[d=1]*365*VEGET_COV_MAX[d=2]*AREAS[d=1]*CONTFRAC[d=1]/1e15)"     | "Growth Resp. (LANDS)"                                | "PgC/yr" | "2"
+lai_lands              | "lai"                           | "" | "lai[d=1]" 	                                                              | "Leaf Area Fraction"   	                	      | "1"   	 | "Areas[d=1]*CONTFRAC[d=1]"
+treeFracPrimDec_lands  | "treeFracPrimDec"               | "" | "treeFracPrimDec[d=1]"                                                        | "Total Primary Deciduous Tree Cover Fraction"         | "%"   	 | "Areas[d=1]*CONTFRAC[d=1]"
+treeFracPrimEver_lands | "treeFracPrimEver"              | "" | "treeFracPrimEver[d=1]"                                                       | "Total Primary Evergreen Tree Cover Fraction"         | "%" 	 | "Areas[d=1]*CONTFRAC[d=1]"
+c3PftFrac_lands        | "c3PftFrac" 	                 | "" | "c3PftFrac[d=1]" 	                                                      | "Total C3 PFT Cover Fraction" 	 	              | "%" 	 | "Areas[d=1]*CONTFRAC[d=1]"
+c4PftFrac_lands        | "c4PftFrac" 	                 | "" | "c4PftFrac[d=1]" 	                                                      | "Total C4 PFT Cover Fraction" 		              | "%" 	 | "Areas[d=1]*CONTFRAC[d=1]"
+cProduct_lands         | "cProduct"           | "" | "(cProduct[d=1]*AREAS[d=1]*CONTFRAC[d=1]*1000/1e15)" 	            | "Carbon in Products of Land Use Change" 	               | "PgC"    | "2"
+fLuc_lands             | "fLuc"               | "" | "(fLuc[d=1]*AREAS[d=1]*CONTFRAC[d=1]*86400*365*1000/1e15)" 	    | "CO2 Flux to Atmosphere from Land Use Change"            | "PgC/yr" | "2"
+ra_lands               | "ra"                 | "" | "(ra[d=1]*AREAS[d=1]*CONTFRAC[d=1]*86400*365*1000/1e15)" 		    | "Autotrophic Respiration"			               | "PgC/yr" | "2"
+fVegLitter_lands       | "fVegLitter"         | "" | "(fVegLitter[d=1]*AREAS[d=1]*CONTFRAC[d=1]*86400*365*1000/1e15)" 	    | "Total Carbon Flux from Vegetation to Litter"            | "PgC/yr" | "2"
+fLitterSoil_lands      | "fLitterSoil"        | "" | "(fLitterSoil[d=1]*AREAS[d=1]*CONTFRAC[d=1]*86400*365*1000/1e15)"      | "Total Carbon Flux from Litter to Soil" 	               | "PgC/yr" | "2"
+cLeaf_lands            | "cLeaf"              | "" | "(cLeaf[d=1]*AREAS[d=1]*CONTFRAC[d=1]*1000/1e15)"                      | "Carbon in Leaves"                                       | "PgC"    | "2"
+cWood_lands            | "cWood"              | "" | "(cWood[d=1]*AREAS[d=1]*CONTFRAC[d=1]*1000/1e15)" 	                    | "Carbon in Wood" 			                       | "PgC"    | "2"
+cRoot_lands            | "cRoot"              | "" | "(cRoot[d=1]*AREAS[d=1]*CONTFRAC[d=1]*1000/1e15)" 	                    | "Carbon in Roots" 			               | "PgC"    | "2"
+cMisc_lands            | "cMisc"              | "" | "(cMisc[d=1]*AREAS[d=1]*CONTFRAC[d=1]*1000/1e15)" 	                    | "Carbon in Other Living Compartments" 	               | "PgC"    | "2"
+cLitterAbove_lands     | "cLitterAbove"       | "" | "(cLitterAbove[d=1]*AREAS[d=1]*CONTFRAC[d=1]*1000/1e15)"               | "Carbon in Above-Ground Litter" 	                       | "PgC"    | "2"
+cLitterBelow_lands     | "cLitterBelow"       | "" | "(cLitterBelow[d=1]*AREAS[d=1]*CONTFRAC[d=1]*1000/1e15)"               | "Carbon in Below-Ground Litter" 	                       | "PgC"    | "2"
+cSoilFast_lands        | "cSoilFast"          | "" | "(cSoilFast[d=1]*AREAS[d=1]*CONTFRAC[d=1]*1000/1e15)"                  | "Carbon in Fast Soil Pool" 		               | "PgC"    | "2"
+cSoilMedium_lands      | "cSoilMedium"        | "" | "(cSoilMedium[d=1]*AREAS[d=1]*CONTFRAC[d=1]*1000/1e15)"                | "Carbon in Medium Soil Pool" 		               | "PgC"    | "2"
+cSoilSlow_lands        | "cSoilSlow"          | "" | "(cSoilSlow[d=1]*AREAS[d=1]*CONTFRAC[d=1]*1000/1e15)"                  | "Carbon in Slow Soil Pool" 	    	               | "PgC"    | "2"
+nppLeaf_lands          | "nppLeaf" 	      | "" | "(nppLeaf[d=1]*AREAS[d=1]*CONTFRAC[d=1]*86400*365*1000/1e15)" 	    | "CO2 Flux from Atmosphere due to NPP Allocation to Leaf" | "PgC/yr" | "2"
+nppWood_lands          | "nppWood" 	      | "" | "(nppWood[d=1]*AREAS[d=1]*CONTFRAC[d=1]*86400*365*1000/1e15)" 	    | "CO2 Flux from Atmosphere due to NPP Allocation to Wood" | "PgC/yr" | "2"
+nppRoot_lands          | "nppRoot" 	      | "" | "(nppRoot[d=1]*AREAS[d=1]*CONTFRAC[d=1]*86400*365*1000/1e15)" 	    | "CO2 Flux from Atmosphere due to NPP Allocation to Root" | "PgC/yr" | "2"
+nep_lands              | "nep" 		      | "" | "(nep[d=1]*AREAS[d=1]*CONTFRAC[d=1]*86400*365*1000/1e15)" 	            | "Net Carbon Mass Flux out of Atmophere due to Net Ecosystem Productivity." | "PgC/yr" | "2"
+cMassVariation_lands   | "cMassVariation"     | "" | "(cMassVariation[d=1]*AREAS[d=1]*CONTFRAC[d=1]*86400*365*1000/1e15)"   | "Carbon Mass Variation"	                               | "PgC/yr" | "2"
+cBal_lands             | "cMassVariation nbp" | "" | "((cMassVariation[d=1,L=2:100000]-nbp[d=2,L=2:100000])*AREAS[d=1]*CONTFRAC[d=1]*86400*365*1000/1e15)" | "Total Carbon Balance"    | "PgC/yr" | "2"
+rGrowth_lands          | "rGrowth" 	      | "" | "(rGrowth[d=1]*AREAS[d=1]*CONTFRAC[d=1]*86400*365*1000/1e15)" 	    | "Growth Autotrophic Respiration" 		               | "PgC/yr" | "2"
+rMaint_lands           | "rMaint" 	      | "" | "(rMaint[d=1]*AREAS[d=1]*CONTFRAC[d=1]*86400*365*1000/1e15)" 	    | "Maintenance Autotrophic Respiration" 	               | "PgC/yr" | "2"
+#------------------------------------------------------------------------------------------------------------------------------------------------------
Index: CMIP6/DAMIP/CM61-LR-hist-stratO3-03.2150/config.card
===================================================================
--- CMIP6/DAMIP/CM61-LR-hist-stratO3-03.2150/config.card	(revision 4131)
+++ CMIP6/DAMIP/CM61-LR-hist-stratO3-03.2150/config.card	(revision 4131)
@@ -0,0 +1,208 @@
+#
+# This is config.card file for IPSLCM6 configuration
+#
+#========================================================================
+#D-- Compatibility -
+[Compatibility]
+libIGCM=1.0
+#D-- UserChoices -
+[UserChoices]
+#===========================
+JobName= CM61-LR-hist-stratO3-03.2150
+#----- Short Name of Experiment
+ExperimentName=hist-stratO3
+#----- DEVT TEST PROD
+SpaceName=PROD
+LongName="IPSLCM6.1.6-LR"
+TagName=IPSLCM6
+ModelName=IPSL-CM6A-LR
+Member=r9i1p1f1
+#D- Choice of experiment in EXPERIMENTS directory
+ExpType=IPSLCM/historical_CMIP6
+#============================
+#-- leap, noleap, 360d
+CalendarType=leap
+#-- Experiment dates : Beginning and ending
+#-- "YYYY-MM-DD"
+DateBegin=1850-01-01
+DateEnd=2020-12-31
+#============================
+ORCA_version=eORCA1.2
+#============================
+#-- 1Y, 1M, 5D, 1D Period Length of one trunk of simulation
+PeriodLength=1Y
+
+#D- For curie, use ccc_mprun as suggested by TGCC
+#ExecutionModeOnCurie=ccc_mprun
+#========================================================================
+#D-- Restarts -
+[Restarts]
+#D- by default: config.card describes no restart for all components 
+#D-             ie start from Levitus or limit files
+#D- If you want to restart all components from the same simulation,
+#D-      put OveRule flag to 'y' and set the next 3 parameters
+OverRule=n
+#D- Last day of the experience used as restart for all components
+RestartDate=2149-12-31
+#D- Define restart simulation name for all components
+RestartJobName=CM61-LR-pi-03
+#D- Path Server Group Login
+RestartPath=${R_IN}/RESTART/IPSLCM6/PROD/piControl
+
+#========================================================================
+#D-- ATM -
+[ATM]
+WriteFrequency="1M HF"
+# If config_Restarts_OverRule == 'n' next 4 params are read
+Restart= y
+# Last day of the experience used as restart for this component if Restart=y
+RestartDate=2149-12-31
+#D- Define restart simulation name for this component
+RestartJobName=CM61-LR-pi-03
+#D- Path Server Group Login
+RestartPath=${R_IN}/RESTART/IPSLCM6/PROD/piControl
+
+#========================================================================
+#D-- OCE -
+[OCE]
+WriteFrequency="1M"
+# If config_Restarts_OverRule == 'n' next 4 params are read
+Restart= y
+#-- Last day of the experience used as restart for this component if Restart=y
+RestartDate=2149-12-31
+#D- Define restart simulation name for this component
+RestartJobName=CM61-LR-pi-03
+#D- Path Server Group Login
+RestartPath=${R_IN}/RESTART/IPSLCM6/PROD/piControl
+
+#========================================================================
+#D-- ICE -
+[ICE]
+WriteFrequency="1M"
+# If config_Restarts_OverRule == 'n' next 4 params are read
+Restart= y
+##-- Last day of the experience used as restart for this component if Restart=y
+RestartDate=2149-12-31
+#D- Define restart simulation name for this component
+RestartJobName=CM61-LR-pi-03
+#D- Path Server Group Login
+RestartPath=${R_IN}/RESTART/IPSLCM6/PROD/piControl
+
+#========================================================================
+#D-- MBG -
+[MBG]
+WriteFrequency="1M 1Y"
+Restart= y
+##-- Last day of the experience used as restart for this component if Restart=y
+RestartDate=2149-12-31
+#D- Define restart simulation name for this component
+RestartJobName=CM61-LR-pi-03
+#D- Path Server Group Login
+RestartPath=${R_IN}/RESTART/IPSLCM6/PROD/piControl
+
+#========================================================================
+#D-- SRF -
+[SRF]
+# WriteFrequency is not used for ORCHIDEE, see orchidee.card/stomate.card 
+WriteFrequency=""
+# If config_Restarts_OverRule == 'n' next 4 params are read
+Restart= y
+# Last day of the experience used as restart for this component if Restart=y
+RestartDate=2149-12-31
+#D- Define restart simulation name for this component
+RestartJobName=CM61-LR-pi-03
+#D- Path Server Group Login
+RestartPath=${R_IN}/RESTART/IPSLCM6/PROD/piControl
+
+#========================================================================
+#D-- SBG - STOMATE
+[SBG]
+# WriteFrequency is not used for ORCHIDEE, see orchidee.card/stomate.card 
+WriteFrequency=""
+# If config_Restarts_OverRule == 'n' next 4 params are read
+Restart= y
+# Last day of the experience used as restart for this component if Restart=y
+RestartDate=2149-12-31
+#D- Define restart simulation name for this component
+RestartJobName=CM61-LR-pi-03
+#D- Path Server Group Login
+RestartPath=${R_IN}/RESTART/IPSLCM6/PROD/piControl
+
+#========================================================================
+#D-- CPL -
+[CPL]
+WriteFrequency="1M"
+# If config_Restarts_OverRule == 'n' next 4 params are read
+Restart= y
+# Last day of the experience used as restart for this component if Restart=y
+RestartDate=2149-12-31
+#D- Define restart simulation name for this component
+RestartJobName=CM61-LR-pi-03
+#D- Path Server Group Login
+RestartPath=${R_IN}/RESTART/IPSLCM6/PROD/piControl
+
+#========================================================================
+#D-- IOS -
+[IOS]
+WriteFrequency=""
+# If config_Restarts_OverRule == 'n' next 4 params are read
+Restart= n
+##-- Last day of the experience used as restart for this component if Restart=y
+RestartDate=
+# Define restart simulation name for this component
+RestartJobName=
+RestartPath=
+
+#========================================================================
+#D-- ListOfComponents -
+[ListOfComponents]
+#D- For each component, Name of component, Tag of component
+ATM= (lmdz, LMDZ-IPSLCM6.0.15-r3329)
+SRF= (orchidee, tag-ORCHIDEE_2_0-5229)
+SBG= (stomate, tag-ORCHIDEE_2_0-5229)
+OCE= (opa9, nemo_v3_6_STABLE-r9455)
+ICE= (lim3, nemo_v3_6_STABLE-r9455)
+MBG= (pisces, nemo_v3_6_STABLE-r9455)
+CPL= (oasis, oasis3-mct-r1818)
+IOS= (xios, dev-cmip6-r1475)
+
+#========================================================================
+#D-- Executable -
+[Executable]
+#D- For each component, Real name of executable, Name of executable for oasis
+ATM= (gcm.e, lmdz.x, 71MPI, 8OMP)
+SRF= ("" ,"" )
+SBG= ("" ,"" )
+OCE= (opa, opa.xx, 360MPI)
+ICE= ("" ,"" )
+MBG= ("" ,"" )
+CPL= ("", "" )
+IOS= (xios_server.exe, xios.x, 12MPI, 3NOD)
+
+#========================================================================
+#D-- Post -
+[Post]
+ParserXIOS=FALSE
+#D- Do we rebuild parallel output, this flag determines
+#D- frequency of rebuild submission (use NONE for DRYRUN=3)
+RebuildFrequency=NONE
+#D- Do we pack restart and debug txt files, this flag determines
+#D- frequency of pack submission (use NONE for DRYRUN=3)
+PackFrequency=10Y
+#D- To have only the last period in RESTART/*.tar : save 90% of volume.
+#D- TRUE to be effective (nothing by default)
+LightRestartPack=TRUE
+#D- If you want to produce time series, this flag determines
+#D- frequency of post-processing submission (NONE if you dont want)
+TimeSeriesFrequency=10Y
+#D- If you want to produce seasonal average, this flag determines
+#D- the period of this average (NONE if you dont want)
+SeasonalFrequency=10Y
+#D- If you want to produce compute PCMDI metrics from seasonal average
+#D- Set FALSE to deactivate the metrics computation.
+MetricsPCMDI=FALSE
+#D- Offset for seasonal average first start dates ; same unit as SeasonalFrequency
+#D- Usefull if you do not want to consider the first X simulations years
+SeasonalFrequencyOffset=0
+
+#========================================================================
