Changeset 4173


Ignore:
Timestamp:
12/05/18 11:48:42 (5 years ago)
Author:
jgipsl
Message:

Updated configuration to be used with ORCHIDEE/trunk revision 5639 or later including the nitrogen cycle. In all experiences in this commit,

the nitrogen cycle is imposed using input file (STOMATE_IMPOSE_CN=y, STOMATE_READ_CN=y, NINPUT_UPDATE=0Y)

Location:
CONFIG/UNIFORM/v6/LMDZOR_v6.3
Files:
13 edited

Legend:

Unmodified
Added
Removed

  • CONFIG/UNIFORM/v6/LMDZOR_v6.3/EXPERIMENTS/LMDZOR/amip/COMP/orchidee.card

    r4135 r4173  
    2727 
    2828[InitialStateFiles] 
    29 List=   (${R_IN}/SRF/soils_param.nc, . ), \ 
     29List=   (${R_IN}/SRF/SOIL/soils_param_fao_cn.nc, soils_param.nc ), \ 
    3030        (${R_IN}/SRF/reftemp.nc, . ), \ 
    31         (${R_IN}/SRF/routing.nc, . ), \ 
     31        (${R_IN}/SRF/ROUTING/routing.nc, . ), \ 
    3232        (${R_IN}/SRF/albedo/alb_bg_modisopt_2D_ESA_v2.nc, alb_bg.nc ), \ 
    3333        (${R_IN}/SRF/cartepente2d_15min.nc, .) 

  • CONFIG/UNIFORM/v6/LMDZOR_v6.3/EXPERIMENTS/LMDZOR/amip/COMP/stomate.card

    r3637 r4173  
    33 
    44[UserChoices] 
     5# NINPUT_UPDATE=1Y: change in nitrogen input maps every year.  
     6# Nitrogen input maps should be set in BoundaryFiles/List for 1Y or in InitialStateFile for 0Y. 
     7NINPUT_UPDATE=0Y 
     8 
     9# STOMATE_IMPOSE_CN: impose nitrogen 
     10# If STOMATE_IMPOSE_CN=y the file leaf_cn.nc must be available 
     11# If STOMATE_IMPOSE_CN=n the other N-input files are needed, see commented files below 
     12STOMATE_IMPOSE_CN=y 
     13 
    514 
    615# Specify output level for output files 
    … …  
    1928 
    2029[InitialStateFiles] 
    21 List=   () 
     30List=    (${R_IN}/SRF/NITROGEN/CN_LEAF/cn_leaf_1850_v0.nc, leaf_cn.nc) 
     31 
     32# Following files are needed if STOMATE_IMPOSE_CN=n 
     33#List=   (${R_IN}/SRF/NITROGEN/N_FERTILISATION/NMIP/synthetic/historical/Nfer_pasture_2000.nc, nfert_pasture.nc) ,\ 
     34#     (${R_IN}/SRF/NITROGEN/N_FERTILISATION/NMIP/synthetic/historical/Nfer_cropland_2000.nc, nfert_cropland.nc) ,\ 
     35#     (${R_IN}/SRF/NITROGEN/N_FERTILISATION/NMIP/manure/historical/Nmanure_pasture_2000.nc, nmanure_pasture.nc) ,\ 
     36#     (${R_IN}/SRF/NITROGEN/N_FERTILISATION/NMIP/manure/historical/Nmanure_cropland_2000.nc, nmanure_cropland.nc) ,\ 
     37#     (${R_IN}/SRF/NITROGEN/N_DEPOSITION/CCMI_ndep/historical/CCMI_ndep_nhx_2000.nc, ndep_nhx.nc), \ 
     38#     (${R_IN}/SRF/NITROGEN/N_DEPOSITION/CCMI_ndep/historical/CCMI_ndep_noy_2000.nc, ndep_noy.nc), \ 
     39#     (${R_IN}/SRF/NITROGEN/BNF/bnf_1850.nc, bnf.nc) 
     40 
    2241 
    2342[BoundaryFiles] 

  • CONFIG/UNIFORM/v6/LMDZOR_v6.3/EXPERIMENTS/LMDZOR/amip_CMIP6/COMP/orchidee.card

    r4135 r4173  
    2727 
    2828[InitialStateFiles] 
    29 List=   (${R_IN}/SRF/soils_param.nc, . ), \ 
     29List=   (${R_IN}/SRF/SOIL/soils_param_fao_cn.nc, soils_param.nc ), \ 
    3030        (${R_IN}/SRF/reftemp.nc, . ), \ 
    31         (${R_IN}/SRF/routing.nc, . ), \ 
     31        (${R_IN}/SRF/ROUTING/routing.nc, . ), \ 
    3232        (${R_IN}/SRF/albedo/alb_bg_modisopt_2D_ESA_v2.nc, alb_bg.nc ), \ 
    3333        (${R_IN}/SRF/cartepente2d_15min.nc, .) 

  • CONFIG/UNIFORM/v6/LMDZOR_v6.3/EXPERIMENTS/LMDZOR/amip_CMIP6/COMP/stomate.card

    r3637 r4173  
    33 
    44[UserChoices] 
     5# NINPUT_UPDATE=1Y: change in nitrogen input maps every year.  
     6# Nitrogen input maps should be set in BoundaryFiles/List for 1Y or in InitialStateFile for 0Y. 
     7NINPUT_UPDATE=0Y 
     8 
     9# STOMATE_IMPOSE_CN: impose nitrogen 
     10# If STOMATE_IMPOSE_CN=y the file leaf_cn.nc must be available 
     11# If STOMATE_IMPOSE_CN=n the other N-input files are needed, see commented files below 
     12STOMATE_IMPOSE_CN=y 
     13 
    514 
    615# Specify output level for output files 
    … …  
    1928 
    2029[InitialStateFiles] 
    21 List=   () 
     30List=    (${R_IN}/SRF/NITROGEN/CN_LEAF/cn_leaf_1850_v0.nc, leaf_cn.nc) 
     31 
     32# Following files are needed if STOMATE_IMPOSE_CN=n 
     33#List=   (${R_IN}/SRF/NITROGEN/N_FERTILISATION/NMIP/synthetic/historical/Nfer_pasture_2000.nc, nfert_pasture.nc) ,\ 
     34#     (${R_IN}/SRF/NITROGEN/N_FERTILISATION/NMIP/synthetic/historical/Nfer_cropland_2000.nc, nfert_cropland.nc) ,\ 
     35#     (${R_IN}/SRF/NITROGEN/N_FERTILISATION/NMIP/manure/historical/Nmanure_pasture_2000.nc, nmanure_pasture.nc) ,\ 
     36#     (${R_IN}/SRF/NITROGEN/N_FERTILISATION/NMIP/manure/historical/Nmanure_cropland_2000.nc, nmanure_cropland.nc) ,\ 
     37#     (${R_IN}/SRF/NITROGEN/N_DEPOSITION/CCMI_ndep/historical/CCMI_ndep_nhx_2000.nc, ndep_nhx.nc), \ 
     38#     (${R_IN}/SRF/NITROGEN/N_DEPOSITION/CCMI_ndep/historical/CCMI_ndep_noy_2000.nc, ndep_noy.nc), \ 
     39#     (${R_IN}/SRF/NITROGEN/BNF/bnf_1850.nc, bnf.nc) 
     40 
    2241 
    2342[BoundaryFiles] 

  • CONFIG/UNIFORM/v6/LMDZOR_v6.3/EXPERIMENTS/LMDZOR/amip_nudge/COMP/orchidee.card

    r4135 r4173  
    2727 
    2828[InitialStateFiles] 
    29 List=   (${R_IN}/SRF/soils_param.nc, . ), \ 
     29List=   (${R_IN}/SRF/SOIL/soils_param_fao_cn.nc, soils_param.nc ), \ 
    3030        (${R_IN}/SRF/reftemp.nc, . ), \ 
    31         (${R_IN}/SRF/routing.nc, . ), \ 
     31        (${R_IN}/SRF/ROUTING/routing.nc, . ), \ 
    3232        (${R_IN}/SRF/albedo/alb_bg_modisopt_2D_ESA_v2.nc, alb_bg.nc ), \ 
    3333        (${R_IN}/SRF/cartepente2d_15min.nc, .) 

  • CONFIG/UNIFORM/v6/LMDZOR_v6.3/EXPERIMENTS/LMDZOR/amip_nudge/COMP/stomate.card

    r3637 r4173  
    33 
    44[UserChoices] 
     5# NINPUT_UPDATE=1Y: change in nitrogen input maps every year.  
     6# Nitrogen input maps should be set in BoundaryFiles/List for 1Y or in InitialStateFile for 0Y. 
     7NINPUT_UPDATE=0Y 
     8 
     9# STOMATE_IMPOSE_CN: impose nitrogen 
     10# If STOMATE_IMPOSE_CN=y the file leaf_cn.nc must be available 
     11# If STOMATE_IMPOSE_CN=n the other N-input files are needed, see commented files below 
     12STOMATE_IMPOSE_CN=y 
     13 
    514 
    615# Specify output level for output files 
    … …  
    1928 
    2029[InitialStateFiles] 
    21 List=   () 
     30List=    (${R_IN}/SRF/NITROGEN/CN_LEAF/cn_leaf_1850_v0.nc, leaf_cn.nc) 
     31 
     32# Following files are needed if STOMATE_IMPOSE_CN=n 
     33#List=   (${R_IN}/SRF/NITROGEN/N_FERTILISATION/NMIP/synthetic/historical/Nfer_pasture_2000.nc, nfert_pasture.nc) ,\ 
     34#     (${R_IN}/SRF/NITROGEN/N_FERTILISATION/NMIP/synthetic/historical/Nfer_cropland_2000.nc, nfert_cropland.nc) ,\ 
     35#     (${R_IN}/SRF/NITROGEN/N_FERTILISATION/NMIP/manure/historical/Nmanure_pasture_2000.nc, nmanure_pasture.nc) ,\ 
     36#     (${R_IN}/SRF/NITROGEN/N_FERTILISATION/NMIP/manure/historical/Nmanure_cropland_2000.nc, nmanure_cropland.nc) ,\ 
     37#     (${R_IN}/SRF/NITROGEN/N_DEPOSITION/CCMI_ndep/historical/CCMI_ndep_nhx_2000.nc, ndep_nhx.nc), \ 
     38#     (${R_IN}/SRF/NITROGEN/N_DEPOSITION/CCMI_ndep/historical/CCMI_ndep_noy_2000.nc, ndep_noy.nc), \ 
     39#     (${R_IN}/SRF/NITROGEN/BNF/bnf_1850.nc, bnf.nc) 
     40 
    2241 
    2342[BoundaryFiles] 

  • CONFIG/UNIFORM/v6/LMDZOR_v6.3/EXPERIMENTS/LMDZOR/clim_360d/COMP/orchidee.card

    r4143 r4173  
    3232 
    3333[InitialStateFiles] 
    34 List=   (${R_IN}/SRF/soils_param.nc, . ), \ 
     34List=   (${R_IN}/SRF/SOIL/soils_param_fao_cn.nc, soils_param.nc ), \ 
    3535        (${R_IN}/SRF/reftemp.nc, . ), \ 
    36         (${R_IN}/SRF/routing.nc, . ), \ 
     36        (${R_IN}/SRF/ROUTING/routing.nc, . ), \ 
    3737        (${R_IN}/SRF/albedo/alb_bg_modisopt_2D_ESA_v2.nc, alb_bg.nc ), \ 
    3838        (${R_IN}/SRF/cartepente2d_15min.nc, .) 

  • CONFIG/UNIFORM/v6/LMDZOR_v6.3/EXPERIMENTS/LMDZOR/clim_360d/COMP/stomate.card

    r3637 r4173  
    33 
    44[UserChoices] 
     5# NINPUT_UPDATE=1Y: change in nitrogen input maps every year.  
     6# Nitrogen input maps should be set in BoundaryFiles/List for 1Y or in InitialStateFile for 0Y. 
     7NINPUT_UPDATE=0Y 
     8 
     9# STOMATE_IMPOSE_CN: impose nitrogen 
     10# If STOMATE_IMPOSE_CN=y the file leaf_cn.nc must be available 
     11# If STOMATE_IMPOSE_CN=n the other N-input files are needed, see commented files below 
     12STOMATE_IMPOSE_CN=y 
     13 
    514 
    615# Specify output level for output files 
    … …  
    1928 
    2029[InitialStateFiles] 
    21 List=   () 
     30List=    (${R_IN}/SRF/NITROGEN/CN_LEAF/cn_leaf_1850_v0.nc, leaf_cn.nc) 
     31 
     32# Following files are needed if STOMATE_IMPOSE_CN=n 
     33#List=   (${R_IN}/SRF/NITROGEN/N_FERTILISATION/NMIP/synthetic/historical/Nfer_pasture_2000.nc, nfert_pasture.nc) ,\ 
     34#     (${R_IN}/SRF/NITROGEN/N_FERTILISATION/NMIP/synthetic/historical/Nfer_cropland_2000.nc, nfert_cropland.nc) ,\ 
     35#     (${R_IN}/SRF/NITROGEN/N_FERTILISATION/NMIP/manure/historical/Nmanure_pasture_2000.nc, nmanure_pasture.nc) ,\ 
     36#     (${R_IN}/SRF/NITROGEN/N_FERTILISATION/NMIP/manure/historical/Nmanure_cropland_2000.nc, nmanure_cropland.nc) ,\ 
     37#     (${R_IN}/SRF/NITROGEN/N_DEPOSITION/CCMI_ndep/historical/CCMI_ndep_nhx_2000.nc, ndep_nhx.nc), \ 
     38#     (${R_IN}/SRF/NITROGEN/N_DEPOSITION/CCMI_ndep/historical/CCMI_ndep_noy_2000.nc, ndep_noy.nc), \ 
     39#     (${R_IN}/SRF/NITROGEN/BNF/bnf_1850.nc, bnf.nc) 
     40 
    2241 
    2342[BoundaryFiles] 

  • CONFIG/UNIFORM/v6/LMDZOR_v6.3/EXPERIMENTS/LMDZOR/clim_pdControl/COMP/orchidee.card

    r4143 r4173  
    3232 
    3333[InitialStateFiles] 
    34 List=   (${R_IN}/SRF/soils_param.nc, . ), \ 
     34List=   (${R_IN}/SRF/SOIL/soils_param_fao_cn.nc, soils_param.nc ), \ 
    3535        (${R_IN}/SRF/reftemp.nc, . ), \ 
    36         (${R_IN}/SRF/routing.nc, . ), \ 
     36        (${R_IN}/SRF/ROUTING/routing.nc, . ), \ 
    3737        (${R_IN}/SRF/albedo/alb_bg_modisopt_2D_ESA_v2.nc, alb_bg.nc ), \ 
    3838        (${R_IN}/SRF/cartepente2d_15min.nc, .) 

  • CONFIG/UNIFORM/v6/LMDZOR_v6.3/EXPERIMENTS/LMDZOR/clim_pdControl/COMP/stomate.card

    r3637 r4173  
    33 
    44[UserChoices] 
     5# NINPUT_UPDATE=1Y: change in nitrogen input maps every year.  
     6# Nitrogen input maps should be set in BoundaryFiles/List for 1Y or in InitialStateFile for 0Y. 
     7NINPUT_UPDATE=0Y 
     8 
     9# STOMATE_IMPOSE_CN: impose nitrogen 
     10# If STOMATE_IMPOSE_CN=y the file leaf_cn.nc must be available 
     11# If STOMATE_IMPOSE_CN=n the other N-input files are needed, see commented files below 
     12STOMATE_IMPOSE_CN=y 
     13 
    514 
    615# Specify output level for output files 
    … …  
    1928 
    2029[InitialStateFiles] 
    21 List=   () 
     30List=    (${R_IN}/SRF/NITROGEN/CN_LEAF/cn_leaf_1850_v0.nc, leaf_cn.nc) 
     31 
     32# Following files are needed if STOMATE_IMPOSE_CN=n 
     33#List=   (${R_IN}/SRF/NITROGEN/N_FERTILISATION/NMIP/synthetic/historical/Nfer_pasture_2000.nc, nfert_pasture.nc) ,\ 
     34#     (${R_IN}/SRF/NITROGEN/N_FERTILISATION/NMIP/synthetic/historical/Nfer_cropland_2000.nc, nfert_cropland.nc) ,\ 
     35#     (${R_IN}/SRF/NITROGEN/N_FERTILISATION/NMIP/manure/historical/Nmanure_pasture_2000.nc, nmanure_pasture.nc) ,\ 
     36#     (${R_IN}/SRF/NITROGEN/N_FERTILISATION/NMIP/manure/historical/Nmanure_cropland_2000.nc, nmanure_cropland.nc) ,\ 
     37#     (${R_IN}/SRF/NITROGEN/N_DEPOSITION/CCMI_ndep/historical/CCMI_ndep_nhx_2000.nc, ndep_nhx.nc), \ 
     38#     (${R_IN}/SRF/NITROGEN/N_DEPOSITION/CCMI_ndep/historical/CCMI_ndep_noy_2000.nc, ndep_noy.nc), \ 
     39#     (${R_IN}/SRF/NITROGEN/BNF/bnf_1850.nc, bnf.nc) 
     40 
    2241 
    2342[BoundaryFiles] 

  • CONFIG/UNIFORM/v6/LMDZOR_v6.3/EXPERIMENTS/LMDZOR/highresmip_CMIP6/COMP/orchidee.card

    r4135 r4173  
    3434 
    3535[InitialStateFiles] 
    36 List=   (${R_IN}/SRF/soils_param.nc, . ), \ 
     36List=   (${R_IN}/SRF/SOIL/soils_param_fao_cn.nc, soils_param.nc ), \ 
    3737        (${R_IN}/SRF/reftemp.nc, . ), \ 
    38         (${R_IN}/SRF/routing.nc, . ), \ 
     38        (${R_IN}/SRF/ROUTING/routing.nc, . ), \ 
    3939        (${R_IN}/SRF/LAI/lai2D_ORCHIDEE_2_0_v1.nc, lai2D.nc), \ 
    4040        (${R_IN}/SRF/albedo/alb_bg_modisopt_2D_ESA_v2.nc, alb_bg.nc ), \ 

  • CONFIG/UNIFORM/v6/LMDZOR_v6.3/GENERAL/DRIVER/stomate.driver

    r3563 r4173  
    5656    fi 
    5757 
     58 
     59    # Modify in orchidee.def NINPUT_UPDATE if it is set in stomate.card section UserChoices 
     60    # NINPUT_UPDATE inidcates if the nitrogen maps should be updated and at which frequency 
     61    if [ ! X${stomate_UserChoices_NINPUT_UPDATE} = X ] ; then 
     62        # Take the value from stomate.card 
     63        IGCM_comp_modifyDefFile nonblocker orchidee.def NINPUT_UPDATE   ${stomate_UserChoices_NINPUT_UPDATE} 
     64    else 
     65        # Set default value 0Y 
     66        IGCM_comp_modifyDefFile nonblocker orchidee.def NINPUT_UPDATE 0Y 
     67    fi 
     68 
     69    # Modify in orchidee.def STOMATE_IMPOSE_CN if it is set in stomate.card section UserChoices 
     70    # STOMATE_IMPOSE_CN inidcates if the nitrogen should be imposed or not.  
     71    if [ ! X${stomate_UserChoices_STOMATE_IMPOSE_CN} = X ] ; then 
     72        # Take the value from stomate.card 
     73        IGCM_comp_modifyDefFile nonblocker orchidee.def STOMATE_IMPOSE_CN   ${stomate_UserChoices_STOMATE_IMPOSE_CN} 
     74    else 
     75        # Set default value n (nitrogen is not imposed) 
     76        IGCM_comp_modifyDefFile nonblocker orchidee.def STOMATE_IMPOSE_CN n 
     77    fi 
     78 
     79 
    5880    IGCM_debug_PopStack "SBG_Update" 
    5981} 

  • CONFIG/UNIFORM/v6/LMDZOR_v6.3/GENERAL/PARAM/orchidee.def_CWRR

    r3815 r4173  
    3131# PRINTLEV = 2 : more output in initialization phase and printing of new date 
    3232# PRINTLEV = 3, 4,.. : more output also at each timestep 
    33 PRINTLEV=1 
     33PRINTLEV=2 
    3434 
    3535# Hydrology parameters 
    … …  
    139139DO_WOOD_HARVEST=_AUTO_ : DEFAULT=y 
    140140 
    141 # Growth respiration (default values except for PFT=14 and PFT=15) 
    142 FRAC_GROWTHRESP__02 = 0.35 
    143 FRAC_GROWTHRESP__03 = 0.35 
    144 FRAC_GROWTHRESP__04 = 0.28 
    145 FRAC_GROWTHRESP__05 = 0.28 
    146 FRAC_GROWTHRESP__06 = 0.28 
    147 FRAC_GROWTHRESP__07 = 0.35 
    148 FRAC_GROWTHRESP__08 = 0.35 
    149 FRAC_GROWTHRESP__09 = 0.35 
    150 FRAC_GROWTHRESP__10 = 0.28 
    151 FRAC_GROWTHRESP__11 = 0.28 
    152 FRAC_GROWTHRESP__12 = 0.28 
    153 FRAC_GROWTHRESP__13 = 0.28 
    154 FRAC_GROWTHRESP__14 = 0.35 
    155 FRAC_GROWTHRESP__15 = 0.35 
    156  
    157141# Maintenance respiration slope C (default values except for PFT=14 and PFT=15) 
    158142MAINT_RESP_SLOPE_C__02 = 0.12 
    … …  
    193177LAI_MAP = _AUTO_ : DEFAULT = n 
    194178 
     179# Parameters related to nitrogen cycle 
     180#************************************************************************** 
     181# Update nitrogen input maps (default 0Y) 
     182NINPUT_UPDATE = _AUTO_ 
     183 
     184# Impose the CN ratio of leaves 
     185STOMATE_IMPOSE_CN = _AUTO_ 
     186 
     187# Set STOMATE_READ_CN=y to read leaf_cn.nc file if STOMATE_IMPOSE_CN=y 
     188STOMATE_READ_CN = y 
     189CNLEAF_VAR = CN_LEAF 
     190 
    195191# Parameters related to surface and thermal physical properties 
    196192#************************************************************************ 
    … …  
    226222CO2_FOR_BVOC_POSSELL=n 
    227223 
     224 
     225# Parameters below are different from default values of ORCHIDEE_2_0. 
     226# These values correspond to the previous default values and were used  
     227# during developement of ORCHIDEE-CN 
     228#************************************************************************** 
     229# Growth respiration 
     230FRAC_GROWTHRESP__02 = 0.28 
     231FRAC_GROWTHRESP__03 = 0.28 
     232FRAC_GROWTHRESP__04 = 0.28 
     233FRAC_GROWTHRESP__05 = 0.28 
     234FRAC_GROWTHRESP__06 = 0.28 
     235FRAC_GROWTHRESP__07 = 0.28 
     236FRAC_GROWTHRESP__08 = 0.28 
     237FRAC_GROWTHRESP__09 = 0.28 
     238FRAC_GROWTHRESP__10 = 0.28 
     239FRAC_GROWTHRESP__11 = 0.28 
     240FRAC_GROWTHRESP__12 = 0.28 
     241FRAC_GROWTHRESP__13 = 0.28 
     242FRAC_GROWTHRESP__14 = 0.28 
     243FRAC_GROWTHRESP__15 = 0.28 
     244 
     245 
     246# Parameters below are different from default values of ORCHIDEE_2_0  
     247# because they were tuned for the developements of ORCHIDEE-CN 
     248#************************************************************************** 
     249MOIAVAIL_ALWAYS_GRASS=0.4 
     250MOIAVAIL_ALWAYS_TREE=0.8 
     251TCST_SNOWA=3 
     252 
     253#PHENO_GDD_CRIT_C(K) 
     254PHENO_GDD_CRIT_C__00012=360 
     255PHENO_GDD_CRIT_C__00013=450 
     256 
     257#HUM_MIN_TIME(days) 
     258HUM_MIN_TIME__00012=50 
     259 
     260#GDD_SENESCENCE(K) 
     261GDD_SENESCENCE__00012=1600 
     262 
     263#ALLOC_MIN(nan) 
     264ALLOC_MIN__00007=0.35000 
     265ALLOC_MIN__00008=0.70 
     266ALLOC_MIN__00009=0.20 
     267 
     268 
     269# File and variable name for nitrogen input files 
     270# Following files are read if STOMATE_IMPOSE_CN=n 
     271#************************************************************************** 
     272Nammonium_FILE = ndep_nhx.nc 
     273Nammonium_VAR = nhx 
     274 
     275Nnitrate_FILE = ndep_noy.nc 
     276Nnitrate_VAR = noy 
     277 
     278Nfert_FILE = NONE 
     279Nfert_VAR = nfer 
     280 
     281Nmanure_FILE = NONE 
     282Nmanure_VAR = Nmanure 
     283 
     284Nfert_cropland_FILE = nfert_cropland.nc 
     285Nfert_cropland_VAR = nfer 
     286 
     287Nmanure_cropland_FILE = nmanure_cropland.nc 
     288Nmanure_cropland_VAR = Nmanure 
     289 
     290Nfert_pasture_FILE = nfert_pasture.nc 
     291Nfert_pasture_VAR = Nfer 
     292 
     293Nmanure_pasture_FILE = nmanure_pasture.nc 
     294Nmanure_pasture_VAR = Nmanure 
     295 
     296Nbnf_FILE= bnf.nc 
     297Nbnf_VAR= BNF_MGN_PERM2_PERYR 
     298 
     299 
Note: See TracChangeset for help on using the changeset viewer.