Changeset 4413

Timestamp:

04/30/19 16:13:31 (5 years ago)

Author:

jgipsl

Message:

Updated config with changes done on LMDZOR_v6.2.

Location:

CONFIG/UNIFORM/v6/IPSLCM6.2

Files:

• AA_make (modified) (1 diff)
• ARCH (copied) (copied from CONFIG/UNIFORM/v6/LMDZOR_v6.2/ARCH)
• EXPERIMENTS/IPSLCM/historical_CMIP6/COMP/orchidee.card (modified) (4 diffs)
• EXPERIMENTS/IPSLCM/historical_CMIP6/config.card (modified) (1 diff)
• EXPERIMENTS/IPSLCM/pdControl_TEST/COMP/orchidee.card (modified) (4 diffs)
• EXPERIMENTS/IPSLCM/pdControl_TEST/config.card (modified) (1 diff)
• EXPERIMENTS/IPSLCM/piControl-spinup_CMIP6/COMP/orchidee.card (modified) (4 diffs)
• EXPERIMENTS/IPSLCM/piControl-spinup_CMIP6/config.card (modified) (1 diff)
• EXPERIMENTS/IPSLCM/piControl_CMIP6/COMP/orchidee.card (modified) (4 diffs)
• EXPERIMENTS/IPSLCM/piControl_CMIP6/config.card (modified) (1 diff)
• EXPERIMENTS/IPSLCM/piControl_TEST/COMP/orchidee.card (modified) (4 diffs)
• EXPERIMENTS/IPSLCM/piControl_TEST/config.card (modified) (1 diff)
• EXPERIMENTS/IPSLCM/scenario_CMIP6/COMP/orchidee.card (modified) (4 diffs)
• EXPERIMENTS/IPSLCM/scenario_CMIP6/config.card (modified) (1 diff)
• EXPERIMENTS/LMDZ/CREATE_amip/config.card (modified) (1 diff)
• EXPERIMENTS/LMDZ/CREATE_clim_360d/config.card (modified) (1 diff)
• EXPERIMENTS/LMDZ/clim_360d/config.card (modified) (1 diff)
• EXPERIMENTS/LMDZOR/amip/COMP/orchidee.card (modified) (4 diffs)
• EXPERIMENTS/LMDZOR/amip/config.card (modified) (1 diff)
• EXPERIMENTS/LMDZOR/amip_CMIP6/COMP/orchidee.card (modified) (4 diffs)
• EXPERIMENTS/LMDZOR/amip_CMIP6/config.card (modified) (1 diff)
• EXPERIMENTS/LMDZOR/amip_nudge/COMP/orchidee.card (modified) (4 diffs)
• EXPERIMENTS/LMDZOR/amip_nudge/config.card (modified) (1 diff)
• EXPERIMENTS/LMDZOR/clim_360d/COMP/orchidee.card (modified) (4 diffs)
• EXPERIMENTS/LMDZOR/clim_360d/config.card (modified) (1 diff)
• EXPERIMENTS/LMDZOR/clim_pdControl/COMP/orchidee.card (modified) (4 diffs)
• EXPERIMENTS/LMDZOR/clim_pdControl/config.card (modified) (1 diff)
• EXPERIMENTS/LMDZOR/highresmip_CMIP6/COMP/orchidee.card (modified) (4 diffs)
• EXPERIMENTS/LMDZOR/highresmip_CMIP6/config.card (modified) (1 diff)
• GENERAL/PARAM/Bands_144x142x79_47prc.dat_3 (deleted)
• GENERAL/PARAM/output.def_high (deleted)
• GENERAL/PARAM/output.def_low (deleted)
• GENERAL/PARAM/output.def_medium (deleted)
• GENERAL/POST/monitoring01_orchidee.cfg (modified) (1 diff)

CONFIG/UNIFORM/v6/IPSLCM6.2/AA_make

@@ -93 +93 @@
 lmdz: ../../modeles/LMDZ
 #       (cd ../../modeles/LMDZ; ./makelmdz_fcm -d $(RESOL_LMDZ) -arch $(FCM_ARCH) -j 8 ce0l ; mv bin/ce0l_$(RESOL_LMDZ)_phylmd_seq.e ../../bin/create_etat0_limit.e ; )
-        (cd ../../modeles/LMDZ ; ./makelmdz_fcm -d $(RESOL_LMDZ) -mem -cosp true -v true -parallel mpi_omp -io xios -rrtm true -c OMCT -job 8 -arch $(FCM_ARCH) gcm  ; mv bin/gcm_$(RESOL_LMDZ)_phylmd_para_mem_orch_couple.e ../../bin/gcm.e ; )
+        (cd ../../modeles/LMDZ ; ./makelmdz_fcm -d $(RESOL_LMDZ) -mem -cosp true -v orchidee2.0 -parallel mpi_omp -io xios -rrtm true -c OMCT -job 8 -arch $(FCM_ARCH) gcm  ; mv bin/gcm_$(RESOL_LMDZ)_phylmd_para_mem_orch_couple.e ../../bin/gcm.e ; )
 
 xios: ../../modeles/XIOS
-        (cd ../../modeles/XIOS; ./make_xios --arch $(FCM_ARCH) --prod --use_oasis oasis3_mct --job 8 ; cp bin/xios_server.exe ../../bin/. ; )
+        (cd ../../modeles/XIOS; ./make_xios --arch $(FCM_ARCH) --prod --use_oasis oasis3_mct --job 4 ; cp bin/xios_server.exe ../../bin/. ; )
 
 orca2lim2:  ../../modeles/NEMOGCM/CONFIG

CONFIG/UNIFORM/v6/IPSLCM6.2/EXPERIMENTS/IPSLCM/historical_CMIP6/COMP/orchidee.card

@@ -4 +4 @@
 [UserChoices]
 # The variable DefSuffix gives the suffix of the orchidee.def file to be used.
-# By default the file orchidee.def_Choi will be selected.
-# Sef DefSuffix=Choi (default) to activate default 2-layer Choisnel hydrology
-# Set DefSuffix=CWRR to activate 11-layer CWRR hydrology
+# By default the file orchidee.def_CWRR will be selected.
 DefSuffix=CWRR
 
@@ -47 +45 @@
 List=   (${SUBMIT_DIR}/PARAM/orchidee.def_${DefSuffix}, orchidee.def)   ,\
         (${MODIPSL}/modeles/ORCHIDEE/src_xml/file_def_orchidee.xml, .)  ,\
-        (${MODIPSL}/modeles/ORCHIDEE/src_xml/file_def_input_orchidee.xml, .) ,\
+        (${MODIPSL}/modeles/ORCHIDEE/src_xml/context_input_orchidee.xml, .) ,\
         (${MODIPSL}/modeles/ORCHIDEE/src_xml/context_orchidee.xml, .)   ,\
         (${MODIPSL}/modeles/ORCHIDEE/src_xml/field_def_orchidee.xml, .) ,\
@@ -56 +54 @@
 
 [OutputText]
-List=   (out_orchidee, orchidee.def, used_orchidee.def, iodef.xml, context_orchidee.xml, field_def_orchidee.xml, file_def_orchidee.xml, file_def_input_orchidee.xml, river_desc.nc)
+List=   (out_orchidee, orchidee.def, used_orchidee.def, iodef.xml, context_orchidee.xml, field_def_orchidee.xml, file_def_orchidee.xml, context_input_orchidee.xml, river_desc.nc)
 
 [OutputFiles]
@@ -66 +64 @@
 Patches = ()
 GatherWithInternal = (lon, lat, time_counter, Areas, Contfrac, time_centered, time_centered_bounds)
-TimeSeriesVars2D = (nobiofrac, alb_nir, alb_vis, evap, fluxlat, fluxsens, rain, runoff, snow, snownobio, snowf, frac_snow, subli, tair, temp_sol, drainage, mrsos, mrso, TWBR, riverflow, coastalflow, DelSoilMoist_daily, DelIntercept_daily, DelSWE_daily, delstock_routing, LAImean, transpir, evapnu, lwdown, swdown, t2m, gppCrop, rhCrop)
+TimeSeriesVars2D = (nobiofrac, alb_nir, alb_vis, evap, fluxlat, fluxsens, rain, runoff, snow, snownobio, snowf, frac_snow, subli, tair, temp_sol, drainage, mrsos, mrso, TWBR, riverflow, coastalflow, DelSoilMoist_daily, DelIntercept_daily, DelSWE_daily, delstock_routing_daily, LAImean, transpir, evapnu, lwdown, swdown, t2m, gppCrop, rhCrop)
 ChunckJob2D = NONE
 TimeSeriesVars3D = (lai, maxvegetfrac, vegetfrac, nee, gpp, growth_resp, hetero_resp, humrel, inter, maint_resp, npp, precisol)

CONFIG/UNIFORM/v6/IPSLCM6.2/EXPERIMENTS/IPSLCM/historical_CMIP6/config.card

@@ -35 +35 @@
 #-- Compression level for netcdf output files
 CompressionLevel=2
+#============================
+#-- Source following file with module settings, only if it exists
+EnvFile=`pwd`/../ARCH/arch.env
+
 #========================================================================
 #D-- Restarts -

CONFIG/UNIFORM/v6/IPSLCM6.2/EXPERIMENTS/IPSLCM/pdControl_TEST/COMP/orchidee.card

@@ -4 +4 @@
 [UserChoices]
 # The variable DefSuffix gives the suffix of the orchidee.def file to be used.
-# By default the file orchidee.def_Choi will be selected.
-# Sef DefSuffix=Choi (default) to activate default 2-layer Choisnel hydrology
-# Set DefSuffix=CWRR to activate 11-layer CWRR hydrology
+# By default the file orchidee.def_CWRR will be selected.
 DefSuffix=CWRR
 
@@ -53 +51 @@
     (${SUBMIT_DIR}/PARAM/ping_orchidee.xml, . )                       ,\
         (${MODIPSL}/modeles/ORCHIDEE/src_xml/file_def_orchidee.xml, .)  ,\
-        (${MODIPSL}/modeles/ORCHIDEE/src_xml/file_def_input_orchidee.xml, .) ,\
+        (${MODIPSL}/modeles/ORCHIDEE/src_xml/context_input_orchidee.xml, .) ,\
         (${MODIPSL}/modeles/ORCHIDEE/src_xml/context_orchidee.xml, .)   ,\
         (${MODIPSL}/modeles/ORCHIDEE/src_xml/field_def_orchidee.xml, .)
@@ -61 +59 @@
 
 [OutputText]
-List=   (out_orchidee, orchidee.def, used_orchidee.def, iodef.xml, context_orchidee.xml, field_def_orchidee.xml, file_def_orchidee.xml, file_def_input_orchidee.xml, river_desc.nc)
+List=   (out_orchidee, orchidee.def, used_orchidee.def, iodef.xml, context_orchidee.xml, field_def_orchidee.xml, file_def_orchidee.xml, context_input_orchidee.xml, river_desc.nc)
 
 [OutputFiles]
@@ -71 +69 @@
 Patches = ()
 GatherWithInternal = (lon, lat, time_counter, Areas, Contfrac, time_centered, time_centered_bounds)
-TimeSeriesVars2D = (nobiofrac, alb_nir, alb_vis, evap, fluxlat, fluxsens, rain, runoff, snow, snownobio, snowf, frac_snow, subli, tair, temp_sol, drainage, mrsos, mrso, TWBR, riverflow, coastalflow, DelSoilMoist_daily, DelIntercept_daily, DelSWE_daily, delstock_routing, LAImean, transpir, evapnu, lwdown, swdown, t2m, gppCrop, rhCrop)
+TimeSeriesVars2D = (nobiofrac, alb_nir, alb_vis, evap, fluxlat, fluxsens, rain, runoff, snow, snownobio, snowf, frac_snow, subli, tair, temp_sol, drainage, mrsos, mrso, TWBR, riverflow, coastalflow, DelSoilMoist_daily, DelIntercept_daily, DelSWE_daily, delstock_routing_daily, LAImean, transpir, evapnu, lwdown, swdown, t2m, gppCrop, rhCrop)
 ChunckJob2D = NONE
 TimeSeriesVars3D = (lai, maxvegetfrac, vegetfrac, nee, gpp, growth_resp, hetero_resp, humrel, inter, maint_resp, npp, precisol)

CONFIG/UNIFORM/v6/IPSLCM6.2/EXPERIMENTS/IPSLCM/pdControl_TEST/config.card

@@ -34 +34 @@
 #-- Compression level for netcdf output files
 CompressionLevel=2
+#============================
+#-- Source following file with module settings, only if it exists
+EnvFile=`pwd`/../ARCH/arch.env
+
 #========================================================================
 #D-- Restarts -

CONFIG/UNIFORM/v6/IPSLCM6.2/EXPERIMENTS/IPSLCM/piControl-spinup_CMIP6/COMP/orchidee.card

@@ -4 +4 @@
 [UserChoices]
 # The variable DefSuffix gives the suffix of the orchidee.def file to be used.
-# By default the file orchidee.def_Choi will be selected.
-# Sef DefSuffix=Choi (default) to activate default 2-layer Choisnel hydrology
-# Set DefSuffix=CWRR to activate 11-layer CWRR hydrology
+# By default the file orchidee.def_CWRR will be selected.
 DefSuffix=CWRR
 
@@ -53 +51 @@
     (${SUBMIT_DIR}/PARAM/ping_orchidee.xml, . )                       ,\
         (${MODIPSL}/modeles/ORCHIDEE/src_xml/file_def_orchidee.xml, .)  ,\
-        (${MODIPSL}/modeles/ORCHIDEE/src_xml/file_def_input_orchidee.xml, .) ,\
+        (${MODIPSL}/modeles/ORCHIDEE/src_xml/context_input_orchidee.xml, .) ,\
         (${MODIPSL}/modeles/ORCHIDEE/src_xml/context_orchidee.xml, .)   ,\
         (${MODIPSL}/modeles/ORCHIDEE/src_xml/field_def_orchidee.xml, .)
@@ -61 +59 @@
 
 [OutputText]
-List=   (out_orchidee, orchidee.def, used_orchidee.def, iodef.xml, context_orchidee.xml, field_def_orchidee.xml, file_def_orchidee.xml, file_def_input_orchidee.xml, river_desc.nc)
+List=   (out_orchidee, orchidee.def, used_orchidee.def, iodef.xml, context_orchidee.xml, field_def_orchidee.xml, file_def_orchidee.xml, context_input_orchidee.xml, river_desc.nc)
 
 [OutputFiles]
@@ -71 +69 @@
 Patches = ()
 GatherWithInternal = (lon, lat, time_counter, Areas, Contfrac, time_centered, time_centered_bounds)
-TimeSeriesVars2D = (nobiofrac, alb_nir, alb_vis, evap, fluxlat, fluxsens, rain, runoff, snow, snownobio, snowf, frac_snow, subli, tair, temp_sol, drainage, mrsos, mrso, TWBR, riverflow, coastalflow, DelSoilMoist_daily, DelIntercept_daily, DelSWE_daily, delstock_routing, LAImean, transpir, evapnu, lwdown, swdown, t2m, gppCrop, rhCrop)
+TimeSeriesVars2D = (nobiofrac, alb_nir, alb_vis, evap, fluxlat, fluxsens, rain, runoff, snow, snownobio, snowf, frac_snow, subli, tair, temp_sol, drainage, mrsos, mrso, TWBR, riverflow, coastalflow, DelSoilMoist_daily, DelIntercept_daily, DelSWE_daily, delstock_routing_daily, LAImean, transpir, evapnu, lwdown, swdown, t2m, gppCrop, rhCrop)
 ChunckJob2D = NONE
 TimeSeriesVars3D = (lai, maxvegetfrac, vegetfrac, nee, gpp, growth_resp, hetero_resp, humrel, inter, maint_resp, npp, precisol)

CONFIG/UNIFORM/v6/IPSLCM6.2/EXPERIMENTS/IPSLCM/piControl-spinup_CMIP6/config.card

@@ -35 +35 @@
 #-- Compression level for netcdf output files
 CompressionLevel=2
+#============================
+#-- Source following file with module settings, only if it exists
+EnvFile=`pwd`/../ARCH/arch.env
+
 #========================================================================
 #D-- Restarts -

CONFIG/UNIFORM/v6/IPSLCM6.2/EXPERIMENTS/IPSLCM/piControl_CMIP6/COMP/orchidee.card

@@ -4 +4 @@
 [UserChoices]
 # The variable DefSuffix gives the suffix of the orchidee.def file to be used.
-# By default the file orchidee.def_Choi will be selected.
-# Sef DefSuffix=Choi (default) to activate default 2-layer Choisnel hydrology
-# Set DefSuffix=CWRR to activate 11-layer CWRR hydrology
+# By default the file orchidee.def_CWRR will be selected.
 DefSuffix=CWRR
 
@@ -53 +51 @@
     (${SUBMIT_DIR}/PARAM/ping_orchidee.xml, . )                       ,\
         (${MODIPSL}/modeles/ORCHIDEE/src_xml/file_def_orchidee.xml, .)  ,\
-        (${MODIPSL}/modeles/ORCHIDEE/src_xml/file_def_input_orchidee.xml, .) ,\
+        (${MODIPSL}/modeles/ORCHIDEE/src_xml/context_input_orchidee.xml, .) ,\
         (${MODIPSL}/modeles/ORCHIDEE/src_xml/context_orchidee.xml, .)   ,\
         (${MODIPSL}/modeles/ORCHIDEE/src_xml/field_def_orchidee.xml, .)
@@ -61 +59 @@
 
 [OutputText]
-List=   (out_orchidee, orchidee.def, used_orchidee.def, iodef.xml, context_orchidee.xml, field_def_orchidee.xml, file_def_orchidee.xml, file_def_input_orchidee.xml, river_desc.nc)
+List=   (out_orchidee, orchidee.def, used_orchidee.def, iodef.xml, context_orchidee.xml, field_def_orchidee.xml, file_def_orchidee.xml, context_input_orchidee.xml, river_desc.nc)
 
 [OutputFiles]
@@ -71 +69 @@
 Patches = ()
 GatherWithInternal = (lon, lat, time_counter, Areas, Contfrac, time_centered, time_centered_bounds)
-TimeSeriesVars2D = (nobiofrac, alb_nir, alb_vis, evap, fluxlat, fluxsens, rain, runoff, snow, snownobio, snowf, frac_snow, subli, tair, temp_sol, drainage, mrsos, mrso, TWBR, riverflow, coastalflow, DelSoilMoist_daily, DelIntercept_daily, DelSWE_daily, delstock_routing, LAImean, transpir, evapnu, lwdown, swdown, t2m, gppCrop, rhCrop)
+TimeSeriesVars2D = (nobiofrac, alb_nir, alb_vis, evap, fluxlat, fluxsens, rain, runoff, snow, snownobio, snowf, frac_snow, subli, tair, temp_sol, drainage, mrsos, mrso, TWBR, riverflow, coastalflow, DelSoilMoist_daily, DelIntercept_daily, DelSWE_daily, delstock_routing_daily, LAImean, transpir, evapnu, lwdown, swdown, t2m, gppCrop, rhCrop)
 ChunckJob2D = NONE
 TimeSeriesVars3D = (lai, maxvegetfrac, vegetfrac, nee, gpp, growth_resp, hetero_resp, humrel, inter, maint_resp, npp, precisol)

CONFIG/UNIFORM/v6/IPSLCM6.2/EXPERIMENTS/IPSLCM/piControl_CMIP6/config.card

@@ -35 +35 @@
 #-- Compression level for netcdf output files
 CompressionLevel=2
+#============================
+#-- Source following file with module settings, only if it exists
+EnvFile=`pwd`/../ARCH/arch.env
+
 #========================================================================
 #D-- Restarts -

CONFIG/UNIFORM/v6/IPSLCM6.2/EXPERIMENTS/IPSLCM/piControl_TEST/COMP/orchidee.card

@@ -4 +4 @@
 [UserChoices]
 # The variable DefSuffix gives the suffix of the orchidee.def file to be used.
-# By default the file orchidee.def_Choi will be selected.
-# Sef DefSuffix=Choi (default) to activate default 2-layer Choisnel hydrology
-# Set DefSuffix=CWRR to activate 11-layer CWRR hydrology
+# By default the file orchidee.def_CWRR will be selected.
 DefSuffix=CWRR
 
@@ -53 +51 @@
     (${SUBMIT_DIR}/PARAM/ping_orchidee.xml, . )                       ,\
         (${MODIPSL}/modeles/ORCHIDEE/src_xml/file_def_orchidee.xml, .)  ,\
-        (${MODIPSL}/modeles/ORCHIDEE/src_xml/file_def_input_orchidee.xml, .) ,\
+        (${MODIPSL}/modeles/ORCHIDEE/src_xml/context_input_orchidee.xml, .) ,\
         (${MODIPSL}/modeles/ORCHIDEE/src_xml/context_orchidee.xml, .)   ,\
         (${MODIPSL}/modeles/ORCHIDEE/src_xml/field_def_orchidee.xml, .)
@@ -61 +59 @@
 
 [OutputText]
-List=   (out_orchidee, orchidee.def, used_orchidee.def, iodef.xml, context_orchidee.xml, field_def_orchidee.xml, file_def_orchidee.xml, file_def_input_orchidee.xml, river_desc.nc)
+List=   (out_orchidee, orchidee.def, used_orchidee.def, iodef.xml, context_orchidee.xml, field_def_orchidee.xml, file_def_orchidee.xml, context_input_orchidee.xml, river_desc.nc)
 
 [OutputFiles]
@@ -71 +69 @@
 Patches = ()
 GatherWithInternal = (lon, lat, time_counter, Areas, Contfrac, time_centered, time_centered_bounds)
-TimeSeriesVars2D = (nobiofrac, alb_nir, alb_vis, evap, fluxlat, fluxsens, rain, runoff, snow, snownobio, snowf, frac_snow, subli, tair, temp_sol, drainage, mrsos, mrso, TWBR, riverflow, coastalflow, DelSoilMoist_daily, DelIntercept_daily, DelSWE_daily, delstock_routing, LAImean, transpir, evapnu, lwdown, swdown, t2m, gppCrop, rhCrop)
+TimeSeriesVars2D = (nobiofrac, alb_nir, alb_vis, evap, fluxlat, fluxsens, rain, runoff, snow, snownobio, snowf, frac_snow, subli, tair, temp_sol, drainage, mrsos, mrso, TWBR, riverflow, coastalflow, DelSoilMoist_daily, DelIntercept_daily, DelSWE_daily, delstock_routing_daily, LAImean, transpir, evapnu, lwdown, swdown, t2m, gppCrop, rhCrop)
 ChunckJob2D = NONE
 TimeSeriesVars3D = (lai, maxvegetfrac, vegetfrac, nee, gpp, growth_resp, hetero_resp, humrel, inter, maint_resp, npp, precisol)

CONFIG/UNIFORM/v6/IPSLCM6.2/EXPERIMENTS/IPSLCM/piControl_TEST/config.card

@@ -34 +34 @@
 #-- Compression level for netcdf output files
 CompressionLevel=2
+#============================
+#-- Source following file with module settings, only if it exists
+EnvFile=`pwd`/../ARCH/arch.env
+
 #========================================================================
 #D-- Restarts -

CONFIG/UNIFORM/v6/IPSLCM6.2/EXPERIMENTS/IPSLCM/scenario_CMIP6/COMP/orchidee.card

@@ -4 +4 @@
 [UserChoices]
 # The variable DefSuffix gives the suffix of the orchidee.def file to be used.
-# By default the file orchidee.def_Choi will be selected.
-# Sef DefSuffix=Choi (default) to activate default 2-layer Choisnel hydrology
-# Set DefSuffix=CWRR to activate 11-layer CWRR hydrology
+# By default the file orchidee.def_CWRR will be selected.
 DefSuffix=CWRR
 
@@ -47 +45 @@
 List=   (${SUBMIT_DIR}/PARAM/orchidee.def_${DefSuffix}, orchidee.def)   ,\
         (${MODIPSL}/modeles/ORCHIDEE/src_xml/file_def_orchidee.xml, .)  ,\
-        (${MODIPSL}/modeles/ORCHIDEE/src_xml/file_def_input_orchidee.xml, .) ,\
+        (${MODIPSL}/modeles/ORCHIDEE/src_xml/context_input_orchidee.xml, .) ,\
         (${MODIPSL}/modeles/ORCHIDEE/src_xml/context_orchidee.xml, .)   ,\
         (${MODIPSL}/modeles/ORCHIDEE/src_xml/field_def_orchidee.xml, .) ,\
@@ -56 +54 @@
 
 [OutputText]
-List=   (out_orchidee, orchidee.def, used_orchidee.def, iodef.xml, context_orchidee.xml, field_def_orchidee.xml, file_def_orchidee.xml, file_def_input_orchidee.xml, river_desc.nc)
+List=   (out_orchidee, orchidee.def, used_orchidee.def, iodef.xml, context_orchidee.xml, field_def_orchidee.xml, file_def_orchidee.xml, context_input_orchidee.xml, river_desc.nc)
 
 [OutputFiles]
@@ -66 +64 @@
 Patches = ()
 GatherWithInternal = (lon, lat, time_counter, Areas, Contfrac, time_centered, time_centered_bounds)
-TimeSeriesVars2D = (nobiofrac, alb_nir, alb_vis, evap, fluxlat, fluxsens, rain, runoff, snow, snownobio, snowf, frac_snow, subli, tair, temp_sol, drainage, mrsos, mrso, TWBR, riverflow, coastalflow, DelSoilMoist_daily, DelIntercept_daily, DelSWE_daily, delstock_routing, LAImean, transpir, evapnu, lwdown, swdown, t2m, gppCrop, rhCrop)
+TimeSeriesVars2D = (nobiofrac, alb_nir, alb_vis, evap, fluxlat, fluxsens, rain, runoff, snow, snownobio, snowf, frac_snow, subli, tair, temp_sol, drainage, mrsos, mrso, TWBR, riverflow, coastalflow, DelSoilMoist_daily, DelIntercept_daily, DelSWE_daily, delstock_routing_daily, LAImean, transpir, evapnu, lwdown, swdown, t2m, gppCrop, rhCrop)
 ChunckJob2D = NONE
 TimeSeriesVars3D = (lai, maxvegetfrac, vegetfrac, nee, gpp, growth_resp, hetero_resp, humrel, inter, maint_resp, npp, precisol)

CONFIG/UNIFORM/v6/IPSLCM6.2/EXPERIMENTS/IPSLCM/scenario_CMIP6/config.card

@@ -36 +36 @@
 #-- Compression level for netcdf output files
 CompressionLevel=2
+#============================
+#-- Source following file with module settings, only if it exists
+EnvFile=`pwd`/../ARCH/arch.env
+
 #========================================================================
 #D-- Restarts -

CONFIG/UNIFORM/v6/IPSLCM6.2/EXPERIMENTS/LMDZ/CREATE_amip/config.card

@@ -29 +29 @@
 #============================
 PeriodNb=50
+#============================
+#-- Source following file with module settings, only if it exists
+EnvFile=`pwd`/../ARCH/arch.env
 
 #========================================================================

CONFIG/UNIFORM/v6/IPSLCM6.2/EXPERIMENTS/LMDZ/CREATE_clim_360d/config.card

@@ -29 +29 @@
 #-- Compression level for netcdf output files
 CompressionLevel=2
+#============================
+#-- Source following file with module settings, only if it exists
+EnvFile=`pwd`/../ARCH/arch.env
+
 #========================================================================
 #D-- ListOfComponents -

CONFIG/UNIFORM/v6/IPSLCM6.2/EXPERIMENTS/LMDZ/clim_360d/config.card

@@ -29 +29 @@
 #-- Compression level for netcdf output files
 CompressionLevel=2
+#============================
+#-- Source following file with module settings, only if it exists
+EnvFile=`pwd`/../ARCH/arch.env
+
 #========================================================================
 #D-- ListOfComponents -

CONFIG/UNIFORM/v6/IPSLCM6.2/EXPERIMENTS/LMDZOR/amip/COMP/orchidee.card

@@ -4 +4 @@
 [UserChoices]
 # The variable DefSuffix gives the suffix of the orchidee.def file to be used.
-# By default the file orchidee.def_Choi will be selected.
-# Sef DefSuffix=Choi (default) to activate default 2-layer Choisnel hydrology
-# Set DefSuffix=CWRR to activate 11-layer CWRR hydrology
+# By default the file orchidee.def_CWRR will be selected.
 DefSuffix=CWRR
 
@@ -46 +44 @@
 List=   (${SUBMIT_DIR}/PARAM/orchidee.def_${DefSuffix}, orchidee.def)   ,\
         (${MODIPSL}/modeles/ORCHIDEE/src_xml/file_def_orchidee.xml, .)  ,\
-        (${MODIPSL}/modeles/ORCHIDEE/src_xml/file_def_input_orchidee.xml, .) ,\
+        (${MODIPSL}/modeles/ORCHIDEE/src_xml/context_input_orchidee.xml, .) ,\
         (${MODIPSL}/modeles/ORCHIDEE/src_xml/context_orchidee.xml, .)   ,\
         (${MODIPSL}/modeles/ORCHIDEE/src_xml/field_def_orchidee.xml, .)
@@ -54 +52 @@
 
 [OutputText]
-List=   (out_orchidee, orchidee.def, used_orchidee.def, iodef.xml, context_orchidee.xml, field_def_orchidee.xml, file_def_orchidee.xml, file_def_input_orchidee.xml, river_desc.nc)
+List=   (out_orchidee, orchidee.def, used_orchidee.def, iodef.xml, context_orchidee.xml, context_input_orchidee.xml, field_def_orchidee.xml, file_def_orchidee.xml, river_desc.nc)
 
 [OutputFiles]
@@ -64 +62 @@
 Patches = ()
 GatherWithInternal = (lon, lat, time_counter, Areas, Contfrac, time_centered, time_centered_bounds)
-TimeSeriesVars2D = (nobiofrac, alb_nir, alb_vis, evap, fluxlat, fluxsens, netrad, qair, rain, runoff, snow, snownobio, snowf, frac_snow, subli, tair, temp_sol, tsol_max, tsol_min, drainage,mrsos, mrso, mrros, mrro, prveg, evspsblveg, evspsblsoi, tran, treeFrac, grassFrac, cropFrac, baresoilFrac, residualFrac, TWBR, riverflow, coastalflow, DelSoilMoist_daily, DelIntercept_daily, DelSWE_daily, delstock_routing, snowmelt, LAImean, transpir, evapnu)
+TimeSeriesVars2D = (nobiofrac, alb_nir, alb_vis, evap, fluxlat, fluxsens, netrad, qair, rain, runoff, snow, snownobio, snowf, frac_snow, subli, tair, temp_sol, tsol_max, tsol_min, drainage,mrsos, mrso, mrros, mrro, prveg, evspsblveg, evspsblsoi, tran, treeFrac, grassFrac, cropFrac, baresoilFrac, residualFrac, TWBR, riverflow, coastalflow, DelSoilMoist_daily, DelIntercept_daily, DelSWE_daily, delstock_routing_daily, snowmelt, LAImean, transpir, evapnu)
 ChunckJob2D = NONE
 TimeSeriesVars3D = (lai, maxvegetfrac, vegetfrac, ptn, nee)

CONFIG/UNIFORM/v6/IPSLCM6.2/EXPERIMENTS/LMDZOR/amip/config.card

@@ -29 +29 @@
 #-- Compression level for netcdf output files
 CompressionLevel=2
+#============================
+#-- Source following file with module settings, only if it exists
+EnvFile=`pwd`/../ARCH/arch.env
+
 #========================================================================
 #D-- ListOfComponents -

CONFIG/UNIFORM/v6/IPSLCM6.2/EXPERIMENTS/LMDZOR/amip_CMIP6/COMP/orchidee.card

@@ -4 +4 @@
 [UserChoices]
 # The variable DefSuffix gives the suffix of the orchidee.def file to be used.
-# By default the file orchidee.def_Choi will be selected.
-# Sef DefSuffix=Choi (default) to activate default 2-layer Choisnel hydrology
-# Set DefSuffix=CWRR to activate 11-layer CWRR hydrology
+# By default the file orchidee.def_CWRR will be selected.
 DefSuffix=CWRR
 
@@ -47 +45 @@
 List=   (${SUBMIT_DIR}/PARAM/orchidee.def_${DefSuffix}, orchidee.def)   ,\
         (${MODIPSL}/modeles/ORCHIDEE/src_xml/file_def_orchidee.xml, .)  ,\
-        (${MODIPSL}/modeles/ORCHIDEE/src_xml/file_def_input_orchidee.xml, .) ,\
+        (${MODIPSL}/modeles/ORCHIDEE/src_xml/context_input_orchidee.xml, .) ,\
         (${MODIPSL}/modeles/ORCHIDEE/src_xml/context_orchidee.xml, .)   ,\
         (${MODIPSL}/modeles/ORCHIDEE/src_xml/field_def_orchidee.xml, .) ,\
@@ -56 +54 @@
 
 [OutputText]
-List=   (out_orchidee, orchidee.def, used_orchidee.def, iodef.xml, context_orchidee.xml, field_def_orchidee.xml, file_def_orchidee.xml, file_def_input_orchidee.xml, river_desc.nc, ping_orchidee.xml, dr2xml_orchidee.xml)
+List=   (out_orchidee, orchidee.def, used_orchidee.def, iodef.xml, context_orchidee.xml, context_input_orchidee.xml, field_def_orchidee.xml, file_def_orchidee.xml, river_desc.nc, ping_orchidee.xml, dr2xml_orchidee.xml)
 
 [OutputFiles]
@@ -66 +64 @@
 Patches = ()
 GatherWithInternal = (lon, lat, time_counter, Areas, Contfrac, time_centered, time_centered_bounds)
-TimeSeriesVars2D = (nobiofrac, alb_nir, alb_vis, evap, fluxlat, fluxsens, netrad, qair, rain, runoff, snow, snownobio, snowf, frac_snow, subli, tair, temp_sol, tsol_max, tsol_min, drainage,mrsos, mrso, mrros, mrro, prveg, evspsblveg, evspsblsoi, tran, treeFrac, grassFrac, cropFrac, baresoilFrac, residualFrac, TWBR, riverflow, coastalflow, DelSoilMoist_daily, DelIntercept_daily, DelSWE_daily, delstock_routing, snowmelt, LAImean, transpir, evapnu)
+TimeSeriesVars2D = (nobiofrac, alb_nir, alb_vis, evap, fluxlat, fluxsens, netrad, qair, rain, runoff, snow, snownobio, snowf, frac_snow, subli, tair, temp_sol, tsol_max, tsol_min, drainage,mrsos, mrso, mrros, mrro, prveg, evspsblveg, evspsblsoi, tran, treeFrac, grassFrac, cropFrac, baresoilFrac, residualFrac, TWBR, riverflow, coastalflow, DelSoilMoist_daily, DelIntercept_daily, DelSWE_daily, delstock_routing_daily, snowmelt, LAImean, transpir, evapnu)
 ChunckJob2D = NONE
 TimeSeriesVars3D = (lai, maxvegetfrac, vegetfrac, ptn, nee)

CONFIG/UNIFORM/v6/IPSLCM6.2/EXPERIMENTS/LMDZOR/amip_CMIP6/config.card

@@ -32 +32 @@
 #-- Compression level for netcdf output files
 CompressionLevel=2
+#============================
+#-- Source following file with module settings, only if it exists
+EnvFile=`pwd`/../ARCH/arch.env
+
 #========================================================================
 #D-- ListOfComponents -

CONFIG/UNIFORM/v6/IPSLCM6.2/EXPERIMENTS/LMDZOR/amip_nudge/COMP/orchidee.card

@@ -4 +4 @@
 [UserChoices]
 # The variable DefSuffix gives the suffix of the orchidee.def file to be used.
-# By default the file orchidee.def_Choi will be selected.
-# Sef DefSuffix=Choi (default) to activate default 2-layer Choisnel hydrology
-# Set DefSuffix=CWRR to activate 11-layer CWRR hydrology
+# By default the file orchidee.def_CWRR will be selected.
 DefSuffix=CWRR
 
@@ -46 +44 @@
 List=   (${SUBMIT_DIR}/PARAM/orchidee.def_${DefSuffix}, orchidee.def)   ,\
         (${MODIPSL}/modeles/ORCHIDEE/src_xml/file_def_orchidee.xml, .)  ,\
-        (${MODIPSL}/modeles/ORCHIDEE/src_xml/file_def_input_orchidee.xml, .) ,\
+        (${MODIPSL}/modeles/ORCHIDEE/src_xml/context_input_orchidee.xml, .) ,\
         (${MODIPSL}/modeles/ORCHIDEE/src_xml/context_orchidee.xml, .)   ,\
         (${MODIPSL}/modeles/ORCHIDEE/src_xml/field_def_orchidee.xml, .)
@@ -54 +52 @@
 
 [OutputText]
-List=   (out_orchidee, orchidee.def, used_orchidee.def, iodef.xml, context_orchidee.xml, field_def_orchidee.xml, file_def_orchidee.xml, file_def_input_orchidee.xml, river_desc.nc)
+List=   (out_orchidee, orchidee.def, used_orchidee.def, iodef.xml, context_orchidee.xml, context_input_orchidee.xml, field_def_orchidee.xml, file_def_orchidee.xml, river_desc.nc)
 
 [OutputFiles]
@@ -64 +62 @@
 Patches = ()
 GatherWithInternal = (lon, lat, time_counter, Areas, Contfrac, time_centered, time_centered_bounds)
-TimeSeriesVars2D = (nobiofrac, alb_nir, alb_vis, evap, fluxlat, fluxsens, netrad, qair, rain, runoff, snow, snownobio, snowf, frac_snow, subli, tair, temp_sol, tsol_max, tsol_min, drainage,mrsos, mrso, mrros, mrro, prveg, evspsblveg, evspsblsoi, tran, treeFrac, grassFrac, cropFrac, baresoilFrac, residualFrac, TWBR, riverflow, coastalflow, DelSoilMoist_daily, DelIntercept_daily, DelSWE_daily, delstock_routing, snowmelt, LAImean, transpir, evapnu)
+TimeSeriesVars2D = (nobiofrac, alb_nir, alb_vis, evap, fluxlat, fluxsens, netrad, qair, rain, runoff, snow, snownobio, snowf, frac_snow, subli, tair, temp_sol, tsol_max, tsol_min, drainage,mrsos, mrso, mrros, mrro, prveg, evspsblveg, evspsblsoi, tran, treeFrac, grassFrac, cropFrac, baresoilFrac, residualFrac, TWBR, riverflow, coastalflow, DelSoilMoist_daily, DelIntercept_daily, DelSWE_daily, delstock_routing_daily, snowmelt, LAImean, transpir, evapnu)
 ChunckJob2D = NONE
 TimeSeriesVars3D = (lai, maxvegetfrac, vegetfrac, ptn, nee)

CONFIG/UNIFORM/v6/IPSLCM6.2/EXPERIMENTS/LMDZOR/amip_nudge/config.card

@@ -29 +29 @@
 #-- Compression level for netcdf output files
 CompressionLevel=2
+#============================
+#-- Source following file with module settings, only if it exists
+EnvFile=`pwd`/../ARCH/arch.env
+
 #========================================================================
 #D-- ListOfComponents -

CONFIG/UNIFORM/v6/IPSLCM6.2/EXPERIMENTS/LMDZOR/clim_360d/COMP/orchidee.card

@@ -4 +4 @@
 [UserChoices]
 # The variable DefSuffix gives the suffix of the orchidee.def file to be used.
-# By default the file orchidee.def_Choi will be selected.
-# Sef DefSuffix=Choi (default) to activate default 2-layer Choisnel hydrology
-# Set DefSuffix=CWRR to activate 11-layer CWRR hydrology
+# By default the file orchidee.def_CWRR will be selected.
 DefSuffix=CWRR
 
@@ -51 +49 @@
 List=   (${SUBMIT_DIR}/PARAM/orchidee.def_${DefSuffix}, orchidee.def)   ,\
         (${MODIPSL}/modeles/ORCHIDEE/src_xml/file_def_orchidee.xml, .)  ,\
-        (${MODIPSL}/modeles/ORCHIDEE/src_xml/file_def_input_orchidee.xml, .) ,\
+        (${MODIPSL}/modeles/ORCHIDEE/src_xml/context_input_orchidee.xml, .) ,\
         (${MODIPSL}/modeles/ORCHIDEE/src_xml/context_orchidee.xml, .)   ,\
         (${MODIPSL}/modeles/ORCHIDEE/src_xml/field_def_orchidee.xml, .)
@@ -59 +57 @@
 
 [OutputText]
-List=   (out_orchidee, orchidee.def, used_orchidee.def, iodef.xml, context_orchidee.xml, field_def_orchidee.xml, file_def_orchidee.xml, file_def_input_orchidee.xml, river_desc.nc)
+List=   (out_orchidee, orchidee.def, used_orchidee.def, iodef.xml, context_orchidee.xml, context_input_orchidee.xml, field_def_orchidee.xml, file_def_orchidee.xml, river_desc.nc)
 
 [OutputFiles]
@@ -69 +67 @@
 Patches = ()
 GatherWithInternal = (lon, lat, time_counter, Areas, Contfrac, time_centered, time_centered_bounds)
-TimeSeriesVars2D = (nobiofrac, alb_nir, alb_vis, evap, fluxlat, fluxsens, netrad, qair, rain, runoff, snow, snownobio, snowf, frac_snow, subli, tair, temp_sol, tsol_max, tsol_min, drainage,mrsos, mrso, mrros, mrro, prveg, evspsblveg, evspsblsoi, tran, treeFrac, grassFrac, cropFrac, baresoilFrac, residualFrac, TWBR, riverflow, coastalflow, DelSoilMoist_daily, DelIntercept_daily, DelSWE_daily, delstock_routing, snowmelt, LAImean, transpir, evapnu)
+TimeSeriesVars2D = (nobiofrac, alb_nir, alb_vis, evap, fluxlat, fluxsens, netrad, qair, rain, runoff, snow, snownobio, snowf, frac_snow, subli, tair, temp_sol, tsol_max, tsol_min, drainage,mrsos, mrso, mrros, mrro, prveg, evspsblveg, evspsblsoi, tran, treeFrac, grassFrac, cropFrac, baresoilFrac, residualFrac, TWBR, riverflow, coastalflow, DelSoilMoist_daily, DelIntercept_daily, DelSWE_daily, delstock_routing_daily, snowmelt, LAImean, transpir, evapnu)
 ChunckJob2D = NONE
 TimeSeriesVars3D = (lai, maxvegetfrac, vegetfrac, ptn, nee)

CONFIG/UNIFORM/v6/IPSLCM6.2/EXPERIMENTS/LMDZOR/clim_360d/config.card

@@ -29 +29 @@
 #-- Compression level for netcdf output files
 CompressionLevel=2
+#============================
+#-- Source following file with module settings, only if it exists
+EnvFile=`pwd`/../ARCH/arch.env
 
 #========================================================================

CONFIG/UNIFORM/v6/IPSLCM6.2/EXPERIMENTS/LMDZOR/clim_pdControl/COMP/orchidee.card

@@ -4 +4 @@
 [UserChoices]
 # The variable DefSuffix gives the suffix of the orchidee.def file to be used.
-# By default the file orchidee.def_Choi will be selected.
-# Sef DefSuffix=Choi (default) to activate default 2-layer Choisnel hydrology
-# Set DefSuffix=CWRR to activate 11-layer CWRR hydrology
+# By default the file orchidee.def_CWRR will be selected.
 DefSuffix=CWRR
 
@@ -51 +49 @@
 List=   (${SUBMIT_DIR}/PARAM/orchidee.def_${DefSuffix}, orchidee.def)   ,\
         (${MODIPSL}/modeles/ORCHIDEE/src_xml/file_def_orchidee.xml, .)  ,\
-        (${MODIPSL}/modeles/ORCHIDEE/src_xml/file_def_input_orchidee.xml, .) ,\
+        (${MODIPSL}/modeles/ORCHIDEE/src_xml/context_input_orchidee.xml, .) ,\
         (${MODIPSL}/modeles/ORCHIDEE/src_xml/context_orchidee.xml, .)   ,\
         (${MODIPSL}/modeles/ORCHIDEE/src_xml/field_def_orchidee.xml, .)
@@ -59 +57 @@
 
 [OutputText]
-List=   (out_orchidee, orchidee.def, used_orchidee.def, iodef.xml, context_orchidee.xml, field_def_orchidee.xml, file_def_orchidee.xml, file_def_input_orchidee.xml, river_desc.nc)
+List=   (out_orchidee, orchidee.def, used_orchidee.def, iodef.xml, context_orchidee.xml, context_input_orchidee.xml, field_def_orchidee.xml, file_def_orchidee.xml, river_desc.nc)
 
 [OutputFiles]
@@ -69 +67 @@
 Patches = ()
 GatherWithInternal = (lon, lat, time_counter, Areas, Contfrac, time_centered, time_centered_bounds)
-TimeSeriesVars2D = (nobiofrac, alb_nir, alb_vis, evap, fluxlat, fluxsens, netrad, qair, rain, runoff, snow, snownobio, snowf, frac_snow, subli, tair, temp_sol, tsol_max, tsol_min, drainage,mrsos, mrso, mrros, mrro, prveg, evspsblveg, evspsblsoi, tran, treeFrac, grassFrac, cropFrac, baresoilFrac, residualFrac, TWBR, riverflow, coastalflow, DelSoilMoist_daily, DelIntercept_daily, DelSWE_daily, delstock_routing, snowmelt, LAImean, transpir, evapnu)
+TimeSeriesVars2D = (nobiofrac, alb_nir, alb_vis, evap, fluxlat, fluxsens, netrad, qair, rain, runoff, snow, snownobio, snowf, frac_snow, subli, tair, temp_sol, tsol_max, tsol_min, drainage,mrsos, mrso, mrros, mrro, prveg, evspsblveg, evspsblsoi, tran, treeFrac, grassFrac, cropFrac, baresoilFrac, residualFrac, TWBR, riverflow, coastalflow, DelSoilMoist_daily, DelIntercept_daily, DelSWE_daily, delstock_routing_daily, snowmelt, LAImean, transpir, evapnu)
 ChunckJob2D = NONE
 TimeSeriesVars3D = (lai, maxvegetfrac, vegetfrac, ptn, nee)

CONFIG/UNIFORM/v6/IPSLCM6.2/EXPERIMENTS/LMDZOR/clim_pdControl/config.card

@@ -29 +29 @@
 #-- Compression level for netcdf output files
 CompressionLevel=2
-
+#============================
+#-- Source following file with module settings, only if it exists
+EnvFile=`pwd`/../ARCH/arch.env
 
 #========================================================================

CONFIG/UNIFORM/v6/IPSLCM6.2/EXPERIMENTS/LMDZOR/highresmip_CMIP6/COMP/orchidee.card

@@ -4 +4 @@
 [UserChoices]
 # The variable DefSuffix gives the suffix of the orchidee.def file to be used.
-# Set DefSuffix=CWRR to activate 11-layer CWRR hydrology (default)
-# Sef DefSuffix=Choi to activate 2-layer Choisnel hydrology (obsolete option)
+# By default the file orchidee.def_CWRR will be selected.
 DefSuffix=CWRR
 
@@ -53 +52 @@
         (${SUBMIT_DIR}/PARAM/ping_orchidee.xml, .) ,\
         (${MODIPSL}/modeles/ORCHIDEE/src_xml/file_def_orchidee.xml, .)  ,\
-        (${MODIPSL}/modeles/ORCHIDEE/src_xml/file_def_input_orchidee.xml, .) ,\
+        (${MODIPSL}/modeles/ORCHIDEE/src_xml/context_input_orchidee.xml, .) ,\
         (${MODIPSL}/modeles/ORCHIDEE/src_xml/context_orchidee.xml, .)   ,\
         (${MODIPSL}/modeles/ORCHIDEE/src_xml/field_def_orchidee.xml, .)
@@ -61 +60 @@
 
 [OutputText]
-List=   (out_orchidee, orchidee.def, used_orchidee.def, iodef.xml, context_orchidee.xml, field_def_orchidee.xml, file_def_orchidee.xml, file_def_input_orchidee.xml, river_desc.nc, ping_orchidee.xml, dr2xml_orchidee.xml)
+List=   (out_orchidee, orchidee.def, used_orchidee.def, iodef.xml, context_orchidee.xml, context_input_orchidee.xml, field_def_orchidee.xml, file_def_orchidee.xml, river_desc.nc, ping_orchidee.xml, dr2xml_orchidee.xml)
 
 [OutputFiles]
@@ -71 +70 @@
 Patches = ()
 GatherWithInternal = (lon, lat, time_counter, Areas, Contfrac, time_centered, time_centered_bounds)
-TimeSeriesVars2D = (nobiofrac, alb_nir, alb_vis, evap, fluxlat, fluxsens, netrad, qair, rain, runoff, snow, snownobio, snowf, frac_snow, subli, tair, temp_sol, tsol_max, tsol_min, drainage,mrsos, mrso, mrros, mrro, prveg, evspsblveg, evspsblsoi, tran, treeFrac, grassFrac, cropFrac, baresoilFrac, residualFrac, TWBR, riverflow, coastalflow, DelSoilMoist_daily, DelIntercept_daily, DelSWE_daily, delstock_routing, snowmelt, LAImean, transpir, evapnu)
+TimeSeriesVars2D = (nobiofrac, alb_nir, alb_vis, evap, fluxlat, fluxsens, netrad, qair, rain, runoff, snow, snownobio, snowf, frac_snow, subli, tair, temp_sol, tsol_max, tsol_min, drainage,mrsos, mrso, mrros, mrro, prveg, evspsblveg, evspsblsoi, tran, treeFrac, grassFrac, cropFrac, baresoilFrac, residualFrac, TWBR, riverflow, coastalflow, DelSoilMoist_daily, DelIntercept_daily, DelSWE_daily, delstock_routing_daily, snowmelt, LAImean, transpir, evapnu)
 ChunckJob2D = NONE
 TimeSeriesVars3D = (lai, maxvegetfrac, vegetfrac, ptn, nee)

CONFIG/UNIFORM/v6/IPSLCM6.2/EXPERIMENTS/LMDZOR/highresmip_CMIP6/config.card

@@ -39 +39 @@
 #-- Compression level for netcdf output files
 CompressionLevel=2
+#============================
+#-- Source following file with module settings, only if it exists
+EnvFile=`pwd`/../ARCH/arch.env
 
 #========================================================================

CONFIG/UNIFORM/v6/IPSLCM6.2/GENERAL/POST/monitoring01_orchidee.cfg

@@ -39 +39 @@
 #  field | files patterns | files additionnal | operations | title | units | calcul of area
 #------------------------------------------------------------------------------------------------------------------------------------------------------
-delta_water_stock | "nobiofrac DelSoilMoist_daily DelIntercept_daily DelSWE_daily delstock_routing" |  "" | "((1-nobiofrac[d=1,l=2:100000])*DelSoilMoist_daily[d=2,l=2:100000] + DelIntercept_daily[d=3,l=2:100000] + DelSWE_daily[d=4,l=2:100000] + delstock_routing[d=5,l=2:100000])" | "Change in total water stock (LANDS) " | "kg/day/m2 of land" | "Areas[d=2]*Contfrac[d=2]"
-water_budget_closure | "nobiofrac DelSoilMoist_daily DelIntercept_daily DelSWE_daily delstock_routing rain snowf evap riverflow coastalflow" | "" | "(((1-nobiofrac[d=1,l=2:100000])*DelSoilMoist_daily[d=2,l=2:100000] + DelIntercept_daily[d=3,l=2:100000] + DelSWE_daily[d=4,l=2:100000] +  delstock_routing[d=5,l=2:100000])*Areas[d=1]*Contfrac[d=1] -  ((rain[d=6,l=2:100000] + snowf[d=7,l=2:100000] - evap[d=8,l=2:100000])*Areas[d=1]*Contfrac[d=1]  - (riverflow[d=9,l=2:100000] + coastalflow[d=10,l=2:100000])*1000*86400 ))/(4*3.14*6370000*6370000*0.26)" | "Water budget closure (LANDS) " | "kg/day/m2 of land" | "2"
+delta_water_stock | "nobiofrac DelSoilMoist_daily DelIntercept_daily DelSWE_daily delstock_routing_daily" |  "" | "((1-nobiofrac[d=1,l=2:100000])*DelSoilMoist_daily[d=2,l=2:100000] + DelIntercept_daily[d=3,l=2:100000] + DelSWE_daily[d=4,l=2:100000] + delstock_routing_daily[d=5,l=2:100000])" | "Change in total water stock (LANDS) " | "kg/day/m2 of land" | "Areas[d=2]*Contfrac[d=2]"
+water_budget_closure | "nobiofrac DelSoilMoist_daily DelIntercept_daily DelSWE_daily delstock_routing_daily rain snowf evap riverflow coastalflow" | "" | "(((1-nobiofrac[d=1,l=2:100000])*DelSoilMoist_daily[d=2,l=2:100000] + DelIntercept_daily[d=3,l=2:100000] + DelSWE_daily[d=4,l=2:100000] +  delstock_routing_daily[d=5,l=2:100000])*Areas[d=1]*Contfrac[d=1] -  ((rain[d=6,l=2:100000] + snowf[d=7,l=2:100000] - evap[d=8,l=2:100000])*Areas[d=1]*Contfrac[d=1]  - (riverflow[d=9,l=2:100000] + coastalflow[d=10,l=2:100000])*1000*86400 ))/(4*3.14*6370000*6370000*0.26)" | "Water budget closure (LANDS) " | "kg/day/m2 of land" | "2"
 twbr_lands       | "TWBR"             |  "" | "twbr[d=1,l=2:100000]*86400"       | "Hydrol water buget residu (LANDS)" | "kg/m^2/d" | "Areas[d=1]*Contfrac[d=1]"
 temp_sol_lands   | "temp_sol"         |  "" | "temp_sol[d=1]"                    | "TSOL (LANDS)"                      | "C"        | "Areas[d=1]*Contfrac[d=1]"