Ignore:
Timestamp:
04/30/19 16:13:31 (5 years ago)
Author:
jgipsl
Message:

Updated config with changes done on LMDZOR_v6.2.

Location:
CONFIG/UNIFORM/v6/IPSLCM6.2/EXPERIMENTS
Files:
27 edited

Legend:

Unmodified
Added
Removed

  • CONFIG/UNIFORM/v6/IPSLCM6.2/EXPERIMENTS/IPSLCM/historical_CMIP6/COMP/orchidee.card

    r3907 r4413  
    44[UserChoices] 
    55# The variable DefSuffix gives the suffix of the orchidee.def file to be used. 
    6 # By default the file orchidee.def_Choi will be selected. 
    7 # Sef DefSuffix=Choi (default) to activate default 2-layer Choisnel hydrology 
    8 # Set DefSuffix=CWRR to activate 11-layer CWRR hydrology 
     6# By default the file orchidee.def_CWRR will be selected. 
    97DefSuffix=CWRR 
    108 
    … …  
    4745List=   (${SUBMIT_DIR}/PARAM/orchidee.def_${DefSuffix}, orchidee.def)   ,\ 
    4846        (${MODIPSL}/modeles/ORCHIDEE/src_xml/file_def_orchidee.xml, .)  ,\ 
    49         (${MODIPSL}/modeles/ORCHIDEE/src_xml/file_def_input_orchidee.xml, .) ,\ 
     47        (${MODIPSL}/modeles/ORCHIDEE/src_xml/context_input_orchidee.xml, .) ,\ 
    5048        (${MODIPSL}/modeles/ORCHIDEE/src_xml/context_orchidee.xml, .)   ,\ 
    5149        (${MODIPSL}/modeles/ORCHIDEE/src_xml/field_def_orchidee.xml, .) ,\ 
    … …  
    5654 
    5755[OutputText] 
    58 List=   (out_orchidee, orchidee.def, used_orchidee.def, iodef.xml, context_orchidee.xml, field_def_orchidee.xml, file_def_orchidee.xml, file_def_input_orchidee.xml, river_desc.nc) 
     56List=   (out_orchidee, orchidee.def, used_orchidee.def, iodef.xml, context_orchidee.xml, field_def_orchidee.xml, file_def_orchidee.xml, context_input_orchidee.xml, river_desc.nc) 
    5957 
    6058[OutputFiles] 
    … …  
    6664Patches = () 
    6765GatherWithInternal = (lon, lat, time_counter, Areas, Contfrac, time_centered, time_centered_bounds) 
    68 TimeSeriesVars2D = (nobiofrac, alb_nir, alb_vis, evap, fluxlat, fluxsens, rain, runoff, snow, snownobio, snowf, frac_snow, subli, tair, temp_sol, drainage, mrsos, mrso, TWBR, riverflow, coastalflow, DelSoilMoist_daily, DelIntercept_daily, DelSWE_daily, delstock_routing, LAImean, transpir, evapnu, lwdown, swdown, t2m, gppCrop, rhCrop) 
     66TimeSeriesVars2D = (nobiofrac, alb_nir, alb_vis, evap, fluxlat, fluxsens, rain, runoff, snow, snownobio, snowf, frac_snow, subli, tair, temp_sol, drainage, mrsos, mrso, TWBR, riverflow, coastalflow, DelSoilMoist_daily, DelIntercept_daily, DelSWE_daily, delstock_routing_daily, LAImean, transpir, evapnu, lwdown, swdown, t2m, gppCrop, rhCrop) 
    6967ChunckJob2D = NONE 
    7068TimeSeriesVars3D = (lai, maxvegetfrac, vegetfrac, nee, gpp, growth_resp, hetero_resp, humrel, inter, maint_resp, npp, precisol) 

  • CONFIG/UNIFORM/v6/IPSLCM6.2/EXPERIMENTS/IPSLCM/historical_CMIP6/config.card

    r4313 r4413  
    3535#-- Compression level for netcdf output files 
    3636CompressionLevel=2 
     37#============================ 
     38#-- Source following file with module settings, only if it exists 
     39EnvFile=`pwd`/../ARCH/arch.env 
     40 
    3741#======================================================================== 
    3842#D-- Restarts - 

  • CONFIG/UNIFORM/v6/IPSLCM6.2/EXPERIMENTS/IPSLCM/pdControl_TEST/COMP/orchidee.card

    r4166 r4413  
    44[UserChoices] 
    55# The variable DefSuffix gives the suffix of the orchidee.def file to be used. 
    6 # By default the file orchidee.def_Choi will be selected. 
    7 # Sef DefSuffix=Choi (default) to activate default 2-layer Choisnel hydrology 
    8 # Set DefSuffix=CWRR to activate 11-layer CWRR hydrology 
     6# By default the file orchidee.def_CWRR will be selected. 
    97DefSuffix=CWRR 
    108 
    … …  
    5351    (${SUBMIT_DIR}/PARAM/ping_orchidee.xml, . )                       ,\ 
    5452        (${MODIPSL}/modeles/ORCHIDEE/src_xml/file_def_orchidee.xml, .)  ,\ 
    55         (${MODIPSL}/modeles/ORCHIDEE/src_xml/file_def_input_orchidee.xml, .) ,\ 
     53        (${MODIPSL}/modeles/ORCHIDEE/src_xml/context_input_orchidee.xml, .) ,\ 
    5654        (${MODIPSL}/modeles/ORCHIDEE/src_xml/context_orchidee.xml, .)   ,\ 
    5755        (${MODIPSL}/modeles/ORCHIDEE/src_xml/field_def_orchidee.xml, .) 
    … …  
    6159 
    6260[OutputText] 
    63 List=   (out_orchidee, orchidee.def, used_orchidee.def, iodef.xml, context_orchidee.xml, field_def_orchidee.xml, file_def_orchidee.xml, file_def_input_orchidee.xml, river_desc.nc) 
     61List=   (out_orchidee, orchidee.def, used_orchidee.def, iodef.xml, context_orchidee.xml, field_def_orchidee.xml, file_def_orchidee.xml, context_input_orchidee.xml, river_desc.nc) 
    6462 
    6563[OutputFiles] 
    … …  
    7169Patches = () 
    7270GatherWithInternal = (lon, lat, time_counter, Areas, Contfrac, time_centered, time_centered_bounds) 
    73 TimeSeriesVars2D = (nobiofrac, alb_nir, alb_vis, evap, fluxlat, fluxsens, rain, runoff, snow, snownobio, snowf, frac_snow, subli, tair, temp_sol, drainage, mrsos, mrso, TWBR, riverflow, coastalflow, DelSoilMoist_daily, DelIntercept_daily, DelSWE_daily, delstock_routing, LAImean, transpir, evapnu, lwdown, swdown, t2m, gppCrop, rhCrop) 
     71TimeSeriesVars2D = (nobiofrac, alb_nir, alb_vis, evap, fluxlat, fluxsens, rain, runoff, snow, snownobio, snowf, frac_snow, subli, tair, temp_sol, drainage, mrsos, mrso, TWBR, riverflow, coastalflow, DelSoilMoist_daily, DelIntercept_daily, DelSWE_daily, delstock_routing_daily, LAImean, transpir, evapnu, lwdown, swdown, t2m, gppCrop, rhCrop) 
    7472ChunckJob2D = NONE 
    7573TimeSeriesVars3D = (lai, maxvegetfrac, vegetfrac, nee, gpp, growth_resp, hetero_resp, humrel, inter, maint_resp, npp, precisol) 

  • CONFIG/UNIFORM/v6/IPSLCM6.2/EXPERIMENTS/IPSLCM/pdControl_TEST/config.card

    r4313 r4413  
    3434#-- Compression level for netcdf output files 
    3535CompressionLevel=2 
     36#============================ 
     37#-- Source following file with module settings, only if it exists 
     38EnvFile=`pwd`/../ARCH/arch.env 
     39 
    3640#======================================================================== 
    3741#D-- Restarts - 

  • CONFIG/UNIFORM/v6/IPSLCM6.2/EXPERIMENTS/IPSLCM/piControl-spinup_CMIP6/COMP/orchidee.card

    r3907 r4413  
    44[UserChoices] 
    55# The variable DefSuffix gives the suffix of the orchidee.def file to be used. 
    6 # By default the file orchidee.def_Choi will be selected. 
    7 # Sef DefSuffix=Choi (default) to activate default 2-layer Choisnel hydrology 
    8 # Set DefSuffix=CWRR to activate 11-layer CWRR hydrology 
     6# By default the file orchidee.def_CWRR will be selected. 
    97DefSuffix=CWRR 
    108 
    … …  
    5351    (${SUBMIT_DIR}/PARAM/ping_orchidee.xml, . )                       ,\ 
    5452        (${MODIPSL}/modeles/ORCHIDEE/src_xml/file_def_orchidee.xml, .)  ,\ 
    55         (${MODIPSL}/modeles/ORCHIDEE/src_xml/file_def_input_orchidee.xml, .) ,\ 
     53        (${MODIPSL}/modeles/ORCHIDEE/src_xml/context_input_orchidee.xml, .) ,\ 
    5654        (${MODIPSL}/modeles/ORCHIDEE/src_xml/context_orchidee.xml, .)   ,\ 
    5755        (${MODIPSL}/modeles/ORCHIDEE/src_xml/field_def_orchidee.xml, .) 
    … …  
    6159 
    6260[OutputText] 
    63 List=   (out_orchidee, orchidee.def, used_orchidee.def, iodef.xml, context_orchidee.xml, field_def_orchidee.xml, file_def_orchidee.xml, file_def_input_orchidee.xml, river_desc.nc) 
     61List=   (out_orchidee, orchidee.def, used_orchidee.def, iodef.xml, context_orchidee.xml, field_def_orchidee.xml, file_def_orchidee.xml, context_input_orchidee.xml, river_desc.nc) 
    6462 
    6563[OutputFiles] 
    … …  
    7169Patches = () 
    7270GatherWithInternal = (lon, lat, time_counter, Areas, Contfrac, time_centered, time_centered_bounds) 
    73 TimeSeriesVars2D = (nobiofrac, alb_nir, alb_vis, evap, fluxlat, fluxsens, rain, runoff, snow, snownobio, snowf, frac_snow, subli, tair, temp_sol, drainage, mrsos, mrso, TWBR, riverflow, coastalflow, DelSoilMoist_daily, DelIntercept_daily, DelSWE_daily, delstock_routing, LAImean, transpir, evapnu, lwdown, swdown, t2m, gppCrop, rhCrop) 
     71TimeSeriesVars2D = (nobiofrac, alb_nir, alb_vis, evap, fluxlat, fluxsens, rain, runoff, snow, snownobio, snowf, frac_snow, subli, tair, temp_sol, drainage, mrsos, mrso, TWBR, riverflow, coastalflow, DelSoilMoist_daily, DelIntercept_daily, DelSWE_daily, delstock_routing_daily, LAImean, transpir, evapnu, lwdown, swdown, t2m, gppCrop, rhCrop) 
    7472ChunckJob2D = NONE 
    7573TimeSeriesVars3D = (lai, maxvegetfrac, vegetfrac, nee, gpp, growth_resp, hetero_resp, humrel, inter, maint_resp, npp, precisol) 

  • CONFIG/UNIFORM/v6/IPSLCM6.2/EXPERIMENTS/IPSLCM/piControl-spinup_CMIP6/config.card

    r4313 r4413  
    3535#-- Compression level for netcdf output files 
    3636CompressionLevel=2 
     37#============================ 
     38#-- Source following file with module settings, only if it exists 
     39EnvFile=`pwd`/../ARCH/arch.env 
     40 
    3741#======================================================================== 
    3842#D-- Restarts - 

  • CONFIG/UNIFORM/v6/IPSLCM6.2/EXPERIMENTS/IPSLCM/piControl_CMIP6/COMP/orchidee.card

    r3907 r4413  
    44[UserChoices] 
    55# The variable DefSuffix gives the suffix of the orchidee.def file to be used. 
    6 # By default the file orchidee.def_Choi will be selected. 
    7 # Sef DefSuffix=Choi (default) to activate default 2-layer Choisnel hydrology 
    8 # Set DefSuffix=CWRR to activate 11-layer CWRR hydrology 
     6# By default the file orchidee.def_CWRR will be selected. 
    97DefSuffix=CWRR 
    108 
    … …  
    5351    (${SUBMIT_DIR}/PARAM/ping_orchidee.xml, . )                       ,\ 
    5452        (${MODIPSL}/modeles/ORCHIDEE/src_xml/file_def_orchidee.xml, .)  ,\ 
    55         (${MODIPSL}/modeles/ORCHIDEE/src_xml/file_def_input_orchidee.xml, .) ,\ 
     53        (${MODIPSL}/modeles/ORCHIDEE/src_xml/context_input_orchidee.xml, .) ,\ 
    5654        (${MODIPSL}/modeles/ORCHIDEE/src_xml/context_orchidee.xml, .)   ,\ 
    5755        (${MODIPSL}/modeles/ORCHIDEE/src_xml/field_def_orchidee.xml, .) 
    … …  
    6159 
    6260[OutputText] 
    63 List=   (out_orchidee, orchidee.def, used_orchidee.def, iodef.xml, context_orchidee.xml, field_def_orchidee.xml, file_def_orchidee.xml, file_def_input_orchidee.xml, river_desc.nc) 
     61List=   (out_orchidee, orchidee.def, used_orchidee.def, iodef.xml, context_orchidee.xml, field_def_orchidee.xml, file_def_orchidee.xml, context_input_orchidee.xml, river_desc.nc) 
    6462 
    6563[OutputFiles] 
    … …  
    7169Patches = () 
    7270GatherWithInternal = (lon, lat, time_counter, Areas, Contfrac, time_centered, time_centered_bounds) 
    73 TimeSeriesVars2D = (nobiofrac, alb_nir, alb_vis, evap, fluxlat, fluxsens, rain, runoff, snow, snownobio, snowf, frac_snow, subli, tair, temp_sol, drainage, mrsos, mrso, TWBR, riverflow, coastalflow, DelSoilMoist_daily, DelIntercept_daily, DelSWE_daily, delstock_routing, LAImean, transpir, evapnu, lwdown, swdown, t2m, gppCrop, rhCrop) 
     71TimeSeriesVars2D = (nobiofrac, alb_nir, alb_vis, evap, fluxlat, fluxsens, rain, runoff, snow, snownobio, snowf, frac_snow, subli, tair, temp_sol, drainage, mrsos, mrso, TWBR, riverflow, coastalflow, DelSoilMoist_daily, DelIntercept_daily, DelSWE_daily, delstock_routing_daily, LAImean, transpir, evapnu, lwdown, swdown, t2m, gppCrop, rhCrop) 
    7472ChunckJob2D = NONE 
    7573TimeSeriesVars3D = (lai, maxvegetfrac, vegetfrac, nee, gpp, growth_resp, hetero_resp, humrel, inter, maint_resp, npp, precisol) 

  • CONFIG/UNIFORM/v6/IPSLCM6.2/EXPERIMENTS/IPSLCM/piControl_CMIP6/config.card

    r4313 r4413  
    3535#-- Compression level for netcdf output files 
    3636CompressionLevel=2 
     37#============================ 
     38#-- Source following file with module settings, only if it exists 
     39EnvFile=`pwd`/../ARCH/arch.env 
     40 
    3741#======================================================================== 
    3842#D-- Restarts - 

  • CONFIG/UNIFORM/v6/IPSLCM6.2/EXPERIMENTS/IPSLCM/piControl_TEST/COMP/orchidee.card

    r3836 r4413  
    44[UserChoices] 
    55# The variable DefSuffix gives the suffix of the orchidee.def file to be used. 
    6 # By default the file orchidee.def_Choi will be selected. 
    7 # Sef DefSuffix=Choi (default) to activate default 2-layer Choisnel hydrology 
    8 # Set DefSuffix=CWRR to activate 11-layer CWRR hydrology 
     6# By default the file orchidee.def_CWRR will be selected. 
    97DefSuffix=CWRR 
    108 
    … …  
    5351    (${SUBMIT_DIR}/PARAM/ping_orchidee.xml, . )                       ,\ 
    5452        (${MODIPSL}/modeles/ORCHIDEE/src_xml/file_def_orchidee.xml, .)  ,\ 
    55         (${MODIPSL}/modeles/ORCHIDEE/src_xml/file_def_input_orchidee.xml, .) ,\ 
     53        (${MODIPSL}/modeles/ORCHIDEE/src_xml/context_input_orchidee.xml, .) ,\ 
    5654        (${MODIPSL}/modeles/ORCHIDEE/src_xml/context_orchidee.xml, .)   ,\ 
    5755        (${MODIPSL}/modeles/ORCHIDEE/src_xml/field_def_orchidee.xml, .) 
    … …  
    6159 
    6260[OutputText] 
    63 List=   (out_orchidee, orchidee.def, used_orchidee.def, iodef.xml, context_orchidee.xml, field_def_orchidee.xml, file_def_orchidee.xml, file_def_input_orchidee.xml, river_desc.nc) 
     61List=   (out_orchidee, orchidee.def, used_orchidee.def, iodef.xml, context_orchidee.xml, field_def_orchidee.xml, file_def_orchidee.xml, context_input_orchidee.xml, river_desc.nc) 
    6462 
    6563[OutputFiles] 
    … …  
    7169Patches = () 
    7270GatherWithInternal = (lon, lat, time_counter, Areas, Contfrac, time_centered, time_centered_bounds) 
    73 TimeSeriesVars2D = (nobiofrac, alb_nir, alb_vis, evap, fluxlat, fluxsens, rain, runoff, snow, snownobio, snowf, frac_snow, subli, tair, temp_sol, drainage, mrsos, mrso, TWBR, riverflow, coastalflow, DelSoilMoist_daily, DelIntercept_daily, DelSWE_daily, delstock_routing, LAImean, transpir, evapnu, lwdown, swdown, t2m, gppCrop, rhCrop) 
     71TimeSeriesVars2D = (nobiofrac, alb_nir, alb_vis, evap, fluxlat, fluxsens, rain, runoff, snow, snownobio, snowf, frac_snow, subli, tair, temp_sol, drainage, mrsos, mrso, TWBR, riverflow, coastalflow, DelSoilMoist_daily, DelIntercept_daily, DelSWE_daily, delstock_routing_daily, LAImean, transpir, evapnu, lwdown, swdown, t2m, gppCrop, rhCrop) 
    7472ChunckJob2D = NONE 
    7573TimeSeriesVars3D = (lai, maxvegetfrac, vegetfrac, nee, gpp, growth_resp, hetero_resp, humrel, inter, maint_resp, npp, precisol) 

  • CONFIG/UNIFORM/v6/IPSLCM6.2/EXPERIMENTS/IPSLCM/piControl_TEST/config.card

    r4313 r4413  
    3434#-- Compression level for netcdf output files 
    3535CompressionLevel=2 
     36#============================ 
     37#-- Source following file with module settings, only if it exists 
     38EnvFile=`pwd`/../ARCH/arch.env 
     39 
    3640#======================================================================== 
    3741#D-- Restarts - 

  • CONFIG/UNIFORM/v6/IPSLCM6.2/EXPERIMENTS/IPSLCM/scenario_CMIP6/COMP/orchidee.card

    r4162 r4413  
    44[UserChoices] 
    55# The variable DefSuffix gives the suffix of the orchidee.def file to be used. 
    6 # By default the file orchidee.def_Choi will be selected. 
    7 # Sef DefSuffix=Choi (default) to activate default 2-layer Choisnel hydrology 
    8 # Set DefSuffix=CWRR to activate 11-layer CWRR hydrology 
     6# By default the file orchidee.def_CWRR will be selected. 
    97DefSuffix=CWRR 
    108 
    … …  
    4745List=   (${SUBMIT_DIR}/PARAM/orchidee.def_${DefSuffix}, orchidee.def)   ,\ 
    4846        (${MODIPSL}/modeles/ORCHIDEE/src_xml/file_def_orchidee.xml, .)  ,\ 
    49         (${MODIPSL}/modeles/ORCHIDEE/src_xml/file_def_input_orchidee.xml, .) ,\ 
     47        (${MODIPSL}/modeles/ORCHIDEE/src_xml/context_input_orchidee.xml, .) ,\ 
    5048        (${MODIPSL}/modeles/ORCHIDEE/src_xml/context_orchidee.xml, .)   ,\ 
    5149        (${MODIPSL}/modeles/ORCHIDEE/src_xml/field_def_orchidee.xml, .) ,\ 
    … …  
    5654 
    5755[OutputText] 
    58 List=   (out_orchidee, orchidee.def, used_orchidee.def, iodef.xml, context_orchidee.xml, field_def_orchidee.xml, file_def_orchidee.xml, file_def_input_orchidee.xml, river_desc.nc) 
     56List=   (out_orchidee, orchidee.def, used_orchidee.def, iodef.xml, context_orchidee.xml, field_def_orchidee.xml, file_def_orchidee.xml, context_input_orchidee.xml, river_desc.nc) 
    5957 
    6058[OutputFiles] 
    … …  
    6664Patches = () 
    6765GatherWithInternal = (lon, lat, time_counter, Areas, Contfrac, time_centered, time_centered_bounds) 
    68 TimeSeriesVars2D = (nobiofrac, alb_nir, alb_vis, evap, fluxlat, fluxsens, rain, runoff, snow, snownobio, snowf, frac_snow, subli, tair, temp_sol, drainage, mrsos, mrso, TWBR, riverflow, coastalflow, DelSoilMoist_daily, DelIntercept_daily, DelSWE_daily, delstock_routing, LAImean, transpir, evapnu, lwdown, swdown, t2m, gppCrop, rhCrop) 
     66TimeSeriesVars2D = (nobiofrac, alb_nir, alb_vis, evap, fluxlat, fluxsens, rain, runoff, snow, snownobio, snowf, frac_snow, subli, tair, temp_sol, drainage, mrsos, mrso, TWBR, riverflow, coastalflow, DelSoilMoist_daily, DelIntercept_daily, DelSWE_daily, delstock_routing_daily, LAImean, transpir, evapnu, lwdown, swdown, t2m, gppCrop, rhCrop) 
    6967ChunckJob2D = NONE 
    7068TimeSeriesVars3D = (lai, maxvegetfrac, vegetfrac, nee, gpp, growth_resp, hetero_resp, humrel, inter, maint_resp, npp, precisol) 

  • CONFIG/UNIFORM/v6/IPSLCM6.2/EXPERIMENTS/IPSLCM/scenario_CMIP6/config.card

    r4313 r4413  
    3636#-- Compression level for netcdf output files 
    3737CompressionLevel=2 
     38#============================ 
     39#-- Source following file with module settings, only if it exists 
     40EnvFile=`pwd`/../ARCH/arch.env 
     41 
    3842#======================================================================== 
    3943#D-- Restarts - 

  • CONFIG/UNIFORM/v6/IPSLCM6.2/EXPERIMENTS/LMDZ/CREATE_amip/config.card

    r4296 r4413  
    2929#============================ 
    3030PeriodNb=50 
     31#============================ 
     32#-- Source following file with module settings, only if it exists 
     33EnvFile=`pwd`/../ARCH/arch.env 
    3134 
    3235#======================================================================== 

  • CONFIG/UNIFORM/v6/IPSLCM6.2/EXPERIMENTS/LMDZ/CREATE_clim_360d/config.card

    r4296 r4413  
    2929#-- Compression level for netcdf output files 
    3030CompressionLevel=2 
     31#============================ 
     32#-- Source following file with module settings, only if it exists 
     33EnvFile=`pwd`/../ARCH/arch.env 
     34 
    3135#======================================================================== 
    3236#D-- ListOfComponents - 

  • CONFIG/UNIFORM/v6/IPSLCM6.2/EXPERIMENTS/LMDZ/clim_360d/config.card

    r4296 r4413  
    2929#-- Compression level for netcdf output files 
    3030CompressionLevel=2 
     31#============================ 
     32#-- Source following file with module settings, only if it exists 
     33EnvFile=`pwd`/../ARCH/arch.env 
     34 
    3135#======================================================================== 
    3236#D-- ListOfComponents - 

  • CONFIG/UNIFORM/v6/IPSLCM6.2/EXPERIMENTS/LMDZOR/amip/COMP/orchidee.card

    r3580 r4413  
    44[UserChoices] 
    55# The variable DefSuffix gives the suffix of the orchidee.def file to be used. 
    6 # By default the file orchidee.def_Choi will be selected. 
    7 # Sef DefSuffix=Choi (default) to activate default 2-layer Choisnel hydrology 
    8 # Set DefSuffix=CWRR to activate 11-layer CWRR hydrology 
     6# By default the file orchidee.def_CWRR will be selected. 
    97DefSuffix=CWRR 
    108 
    … …  
    4644List=   (${SUBMIT_DIR}/PARAM/orchidee.def_${DefSuffix}, orchidee.def)   ,\ 
    4745        (${MODIPSL}/modeles/ORCHIDEE/src_xml/file_def_orchidee.xml, .)  ,\ 
    48         (${MODIPSL}/modeles/ORCHIDEE/src_xml/file_def_input_orchidee.xml, .) ,\ 
     46        (${MODIPSL}/modeles/ORCHIDEE/src_xml/context_input_orchidee.xml, .) ,\ 
    4947        (${MODIPSL}/modeles/ORCHIDEE/src_xml/context_orchidee.xml, .)   ,\ 
    5048        (${MODIPSL}/modeles/ORCHIDEE/src_xml/field_def_orchidee.xml, .) 
    … …  
    5452 
    5553[OutputText] 
    56 List=   (out_orchidee, orchidee.def, used_orchidee.def, iodef.xml, context_orchidee.xml, field_def_orchidee.xml, file_def_orchidee.xml, file_def_input_orchidee.xml, river_desc.nc) 
     54List=   (out_orchidee, orchidee.def, used_orchidee.def, iodef.xml, context_orchidee.xml, context_input_orchidee.xml, field_def_orchidee.xml, file_def_orchidee.xml, river_desc.nc) 
    5755 
    5856[OutputFiles] 
    … …  
    6462Patches = () 
    6563GatherWithInternal = (lon, lat, time_counter, Areas, Contfrac, time_centered, time_centered_bounds) 
    66 TimeSeriesVars2D = (nobiofrac, alb_nir, alb_vis, evap, fluxlat, fluxsens, netrad, qair, rain, runoff, snow, snownobio, snowf, frac_snow, subli, tair, temp_sol, tsol_max, tsol_min, drainage,mrsos, mrso, mrros, mrro, prveg, evspsblveg, evspsblsoi, tran, treeFrac, grassFrac, cropFrac, baresoilFrac, residualFrac, TWBR, riverflow, coastalflow, DelSoilMoist_daily, DelIntercept_daily, DelSWE_daily, delstock_routing, snowmelt, LAImean, transpir, evapnu) 
     64TimeSeriesVars2D = (nobiofrac, alb_nir, alb_vis, evap, fluxlat, fluxsens, netrad, qair, rain, runoff, snow, snownobio, snowf, frac_snow, subli, tair, temp_sol, tsol_max, tsol_min, drainage,mrsos, mrso, mrros, mrro, prveg, evspsblveg, evspsblsoi, tran, treeFrac, grassFrac, cropFrac, baresoilFrac, residualFrac, TWBR, riverflow, coastalflow, DelSoilMoist_daily, DelIntercept_daily, DelSWE_daily, delstock_routing_daily, snowmelt, LAImean, transpir, evapnu) 
    6765ChunckJob2D = NONE 
    6866TimeSeriesVars3D = (lai, maxvegetfrac, vegetfrac, ptn, nee) 

  • CONFIG/UNIFORM/v6/IPSLCM6.2/EXPERIMENTS/LMDZOR/amip/config.card

    r4296 r4413  
    2929#-- Compression level for netcdf output files 
    3030CompressionLevel=2 
     31#============================ 
     32#-- Source following file with module settings, only if it exists 
     33EnvFile=`pwd`/../ARCH/arch.env 
     34 
    3135#======================================================================== 
    3236#D-- ListOfComponents - 

  • CONFIG/UNIFORM/v6/IPSLCM6.2/EXPERIMENTS/LMDZOR/amip_CMIP6/COMP/orchidee.card

    r3915 r4413  
    44[UserChoices] 
    55# The variable DefSuffix gives the suffix of the orchidee.def file to be used. 
    6 # By default the file orchidee.def_Choi will be selected. 
    7 # Sef DefSuffix=Choi (default) to activate default 2-layer Choisnel hydrology 
    8 # Set DefSuffix=CWRR to activate 11-layer CWRR hydrology 
     6# By default the file orchidee.def_CWRR will be selected. 
    97DefSuffix=CWRR 
    108 
    … …  
    4745List=   (${SUBMIT_DIR}/PARAM/orchidee.def_${DefSuffix}, orchidee.def)   ,\ 
    4846        (${MODIPSL}/modeles/ORCHIDEE/src_xml/file_def_orchidee.xml, .)  ,\ 
    49         (${MODIPSL}/modeles/ORCHIDEE/src_xml/file_def_input_orchidee.xml, .) ,\ 
     47        (${MODIPSL}/modeles/ORCHIDEE/src_xml/context_input_orchidee.xml, .) ,\ 
    5048        (${MODIPSL}/modeles/ORCHIDEE/src_xml/context_orchidee.xml, .)   ,\ 
    5149        (${MODIPSL}/modeles/ORCHIDEE/src_xml/field_def_orchidee.xml, .) ,\ 
    … …  
    5654 
    5755[OutputText] 
    58 List=   (out_orchidee, orchidee.def, used_orchidee.def, iodef.xml, context_orchidee.xml, field_def_orchidee.xml, file_def_orchidee.xml, file_def_input_orchidee.xml, river_desc.nc, ping_orchidee.xml, dr2xml_orchidee.xml) 
     56List=   (out_orchidee, orchidee.def, used_orchidee.def, iodef.xml, context_orchidee.xml, context_input_orchidee.xml, field_def_orchidee.xml, file_def_orchidee.xml, river_desc.nc, ping_orchidee.xml, dr2xml_orchidee.xml) 
    5957 
    6058[OutputFiles] 
    … …  
    6664Patches = () 
    6765GatherWithInternal = (lon, lat, time_counter, Areas, Contfrac, time_centered, time_centered_bounds) 
    68 TimeSeriesVars2D = (nobiofrac, alb_nir, alb_vis, evap, fluxlat, fluxsens, netrad, qair, rain, runoff, snow, snownobio, snowf, frac_snow, subli, tair, temp_sol, tsol_max, tsol_min, drainage,mrsos, mrso, mrros, mrro, prveg, evspsblveg, evspsblsoi, tran, treeFrac, grassFrac, cropFrac, baresoilFrac, residualFrac, TWBR, riverflow, coastalflow, DelSoilMoist_daily, DelIntercept_daily, DelSWE_daily, delstock_routing, snowmelt, LAImean, transpir, evapnu) 
     66TimeSeriesVars2D = (nobiofrac, alb_nir, alb_vis, evap, fluxlat, fluxsens, netrad, qair, rain, runoff, snow, snownobio, snowf, frac_snow, subli, tair, temp_sol, tsol_max, tsol_min, drainage,mrsos, mrso, mrros, mrro, prveg, evspsblveg, evspsblsoi, tran, treeFrac, grassFrac, cropFrac, baresoilFrac, residualFrac, TWBR, riverflow, coastalflow, DelSoilMoist_daily, DelIntercept_daily, DelSWE_daily, delstock_routing_daily, snowmelt, LAImean, transpir, evapnu) 
    6967ChunckJob2D = NONE 
    7068TimeSeriesVars3D = (lai, maxvegetfrac, vegetfrac, ptn, nee) 

  • CONFIG/UNIFORM/v6/IPSLCM6.2/EXPERIMENTS/LMDZOR/amip_CMIP6/config.card

    r4313 r4413  
    3232#-- Compression level for netcdf output files 
    3333CompressionLevel=2 
     34#============================ 
     35#-- Source following file with module settings, only if it exists 
     36EnvFile=`pwd`/../ARCH/arch.env 
     37 
    3438#======================================================================== 
    3539#D-- ListOfComponents - 

  • CONFIG/UNIFORM/v6/IPSLCM6.2/EXPERIMENTS/LMDZOR/amip_nudge/COMP/orchidee.card

    r3563 r4413  
    44[UserChoices] 
    55# The variable DefSuffix gives the suffix of the orchidee.def file to be used. 
    6 # By default the file orchidee.def_Choi will be selected. 
    7 # Sef DefSuffix=Choi (default) to activate default 2-layer Choisnel hydrology 
    8 # Set DefSuffix=CWRR to activate 11-layer CWRR hydrology 
     6# By default the file orchidee.def_CWRR will be selected. 
    97DefSuffix=CWRR 
    108 
    … …  
    4644List=   (${SUBMIT_DIR}/PARAM/orchidee.def_${DefSuffix}, orchidee.def)   ,\ 
    4745        (${MODIPSL}/modeles/ORCHIDEE/src_xml/file_def_orchidee.xml, .)  ,\ 
    48         (${MODIPSL}/modeles/ORCHIDEE/src_xml/file_def_input_orchidee.xml, .) ,\ 
     46        (${MODIPSL}/modeles/ORCHIDEE/src_xml/context_input_orchidee.xml, .) ,\ 
    4947        (${MODIPSL}/modeles/ORCHIDEE/src_xml/context_orchidee.xml, .)   ,\ 
    5048        (${MODIPSL}/modeles/ORCHIDEE/src_xml/field_def_orchidee.xml, .) 
    … …  
    5452 
    5553[OutputText] 
    56 List=   (out_orchidee, orchidee.def, used_orchidee.def, iodef.xml, context_orchidee.xml, field_def_orchidee.xml, file_def_orchidee.xml, file_def_input_orchidee.xml, river_desc.nc) 
     54List=   (out_orchidee, orchidee.def, used_orchidee.def, iodef.xml, context_orchidee.xml, context_input_orchidee.xml, field_def_orchidee.xml, file_def_orchidee.xml, river_desc.nc) 
    5755 
    5856[OutputFiles] 
    … …  
    6462Patches = () 
    6563GatherWithInternal = (lon, lat, time_counter, Areas, Contfrac, time_centered, time_centered_bounds) 
    66 TimeSeriesVars2D = (nobiofrac, alb_nir, alb_vis, evap, fluxlat, fluxsens, netrad, qair, rain, runoff, snow, snownobio, snowf, frac_snow, subli, tair, temp_sol, tsol_max, tsol_min, drainage,mrsos, mrso, mrros, mrro, prveg, evspsblveg, evspsblsoi, tran, treeFrac, grassFrac, cropFrac, baresoilFrac, residualFrac, TWBR, riverflow, coastalflow, DelSoilMoist_daily, DelIntercept_daily, DelSWE_daily, delstock_routing, snowmelt, LAImean, transpir, evapnu) 
     64TimeSeriesVars2D = (nobiofrac, alb_nir, alb_vis, evap, fluxlat, fluxsens, netrad, qair, rain, runoff, snow, snownobio, snowf, frac_snow, subli, tair, temp_sol, tsol_max, tsol_min, drainage,mrsos, mrso, mrros, mrro, prveg, evspsblveg, evspsblsoi, tran, treeFrac, grassFrac, cropFrac, baresoilFrac, residualFrac, TWBR, riverflow, coastalflow, DelSoilMoist_daily, DelIntercept_daily, DelSWE_daily, delstock_routing_daily, snowmelt, LAImean, transpir, evapnu) 
    6765ChunckJob2D = NONE 
    6866TimeSeriesVars3D = (lai, maxvegetfrac, vegetfrac, ptn, nee) 

  • CONFIG/UNIFORM/v6/IPSLCM6.2/EXPERIMENTS/LMDZOR/amip_nudge/config.card

    r4296 r4413  
    2929#-- Compression level for netcdf output files 
    3030CompressionLevel=2 
     31#============================ 
     32#-- Source following file with module settings, only if it exists 
     33EnvFile=`pwd`/../ARCH/arch.env 
     34 
    3135#======================================================================== 
    3236#D-- ListOfComponents - 

  • CONFIG/UNIFORM/v6/IPSLCM6.2/EXPERIMENTS/LMDZOR/clim_360d/COMP/orchidee.card

    r4143 r4413  
    44[UserChoices] 
    55# The variable DefSuffix gives the suffix of the orchidee.def file to be used. 
    6 # By default the file orchidee.def_Choi will be selected. 
    7 # Sef DefSuffix=Choi (default) to activate default 2-layer Choisnel hydrology 
    8 # Set DefSuffix=CWRR to activate 11-layer CWRR hydrology 
     6# By default the file orchidee.def_CWRR will be selected. 
    97DefSuffix=CWRR 
    108 
    … …  
    5149List=   (${SUBMIT_DIR}/PARAM/orchidee.def_${DefSuffix}, orchidee.def)   ,\ 
    5250        (${MODIPSL}/modeles/ORCHIDEE/src_xml/file_def_orchidee.xml, .)  ,\ 
    53         (${MODIPSL}/modeles/ORCHIDEE/src_xml/file_def_input_orchidee.xml, .) ,\ 
     51        (${MODIPSL}/modeles/ORCHIDEE/src_xml/context_input_orchidee.xml, .) ,\ 
    5452        (${MODIPSL}/modeles/ORCHIDEE/src_xml/context_orchidee.xml, .)   ,\ 
    5553        (${MODIPSL}/modeles/ORCHIDEE/src_xml/field_def_orchidee.xml, .) 
    … …  
    5957 
    6058[OutputText] 
    61 List=   (out_orchidee, orchidee.def, used_orchidee.def, iodef.xml, context_orchidee.xml, field_def_orchidee.xml, file_def_orchidee.xml, file_def_input_orchidee.xml, river_desc.nc) 
     59List=   (out_orchidee, orchidee.def, used_orchidee.def, iodef.xml, context_orchidee.xml, context_input_orchidee.xml, field_def_orchidee.xml, file_def_orchidee.xml, river_desc.nc) 
    6260 
    6361[OutputFiles] 
    … …  
    6967Patches = () 
    7068GatherWithInternal = (lon, lat, time_counter, Areas, Contfrac, time_centered, time_centered_bounds) 
    71 TimeSeriesVars2D = (nobiofrac, alb_nir, alb_vis, evap, fluxlat, fluxsens, netrad, qair, rain, runoff, snow, snownobio, snowf, frac_snow, subli, tair, temp_sol, tsol_max, tsol_min, drainage,mrsos, mrso, mrros, mrro, prveg, evspsblveg, evspsblsoi, tran, treeFrac, grassFrac, cropFrac, baresoilFrac, residualFrac, TWBR, riverflow, coastalflow, DelSoilMoist_daily, DelIntercept_daily, DelSWE_daily, delstock_routing, snowmelt, LAImean, transpir, evapnu) 
     69TimeSeriesVars2D = (nobiofrac, alb_nir, alb_vis, evap, fluxlat, fluxsens, netrad, qair, rain, runoff, snow, snownobio, snowf, frac_snow, subli, tair, temp_sol, tsol_max, tsol_min, drainage,mrsos, mrso, mrros, mrro, prveg, evspsblveg, evspsblsoi, tran, treeFrac, grassFrac, cropFrac, baresoilFrac, residualFrac, TWBR, riverflow, coastalflow, DelSoilMoist_daily, DelIntercept_daily, DelSWE_daily, delstock_routing_daily, snowmelt, LAImean, transpir, evapnu) 
    7270ChunckJob2D = NONE 
    7371TimeSeriesVars3D = (lai, maxvegetfrac, vegetfrac, ptn, nee) 

  • CONFIG/UNIFORM/v6/IPSLCM6.2/EXPERIMENTS/LMDZOR/clim_360d/config.card

    r4296 r4413  
    2929#-- Compression level for netcdf output files 
    3030CompressionLevel=2 
     31#============================ 
     32#-- Source following file with module settings, only if it exists 
     33EnvFile=`pwd`/../ARCH/arch.env 
    3134 
    3235#======================================================================== 

  • CONFIG/UNIFORM/v6/IPSLCM6.2/EXPERIMENTS/LMDZOR/clim_pdControl/COMP/orchidee.card

    r4143 r4413  
    44[UserChoices] 
    55# The variable DefSuffix gives the suffix of the orchidee.def file to be used. 
    6 # By default the file orchidee.def_Choi will be selected. 
    7 # Sef DefSuffix=Choi (default) to activate default 2-layer Choisnel hydrology 
    8 # Set DefSuffix=CWRR to activate 11-layer CWRR hydrology 
     6# By default the file orchidee.def_CWRR will be selected. 
    97DefSuffix=CWRR 
    108 
    … …  
    5149List=   (${SUBMIT_DIR}/PARAM/orchidee.def_${DefSuffix}, orchidee.def)   ,\ 
    5250        (${MODIPSL}/modeles/ORCHIDEE/src_xml/file_def_orchidee.xml, .)  ,\ 
    53         (${MODIPSL}/modeles/ORCHIDEE/src_xml/file_def_input_orchidee.xml, .) ,\ 
     51        (${MODIPSL}/modeles/ORCHIDEE/src_xml/context_input_orchidee.xml, .) ,\ 
    5452        (${MODIPSL}/modeles/ORCHIDEE/src_xml/context_orchidee.xml, .)   ,\ 
    5553        (${MODIPSL}/modeles/ORCHIDEE/src_xml/field_def_orchidee.xml, .) 
    … …  
    5957 
    6058[OutputText] 
    61 List=   (out_orchidee, orchidee.def, used_orchidee.def, iodef.xml, context_orchidee.xml, field_def_orchidee.xml, file_def_orchidee.xml, file_def_input_orchidee.xml, river_desc.nc) 
     59List=   (out_orchidee, orchidee.def, used_orchidee.def, iodef.xml, context_orchidee.xml, context_input_orchidee.xml, field_def_orchidee.xml, file_def_orchidee.xml, river_desc.nc) 
    6260 
    6361[OutputFiles] 
    … …  
    6967Patches = () 
    7068GatherWithInternal = (lon, lat, time_counter, Areas, Contfrac, time_centered, time_centered_bounds) 
    71 TimeSeriesVars2D = (nobiofrac, alb_nir, alb_vis, evap, fluxlat, fluxsens, netrad, qair, rain, runoff, snow, snownobio, snowf, frac_snow, subli, tair, temp_sol, tsol_max, tsol_min, drainage,mrsos, mrso, mrros, mrro, prveg, evspsblveg, evspsblsoi, tran, treeFrac, grassFrac, cropFrac, baresoilFrac, residualFrac, TWBR, riverflow, coastalflow, DelSoilMoist_daily, DelIntercept_daily, DelSWE_daily, delstock_routing, snowmelt, LAImean, transpir, evapnu) 
     69TimeSeriesVars2D = (nobiofrac, alb_nir, alb_vis, evap, fluxlat, fluxsens, netrad, qair, rain, runoff, snow, snownobio, snowf, frac_snow, subli, tair, temp_sol, tsol_max, tsol_min, drainage,mrsos, mrso, mrros, mrro, prveg, evspsblveg, evspsblsoi, tran, treeFrac, grassFrac, cropFrac, baresoilFrac, residualFrac, TWBR, riverflow, coastalflow, DelSoilMoist_daily, DelIntercept_daily, DelSWE_daily, delstock_routing_daily, snowmelt, LAImean, transpir, evapnu) 
    7270ChunckJob2D = NONE 
    7371TimeSeriesVars3D = (lai, maxvegetfrac, vegetfrac, ptn, nee) 

  • CONFIG/UNIFORM/v6/IPSLCM6.2/EXPERIMENTS/LMDZOR/clim_pdControl/config.card

    r4296 r4413  
    2929#-- Compression level for netcdf output files 
    3030CompressionLevel=2 
    31  
     31#============================ 
     32#-- Source following file with module settings, only if it exists 
     33EnvFile=`pwd`/../ARCH/arch.env 
    3234 
    3335#======================================================================== 

  • CONFIG/UNIFORM/v6/IPSLCM6.2/EXPERIMENTS/LMDZOR/highresmip_CMIP6/COMP/orchidee.card

    r4034 r4413  
    44[UserChoices] 
    55# The variable DefSuffix gives the suffix of the orchidee.def file to be used. 
    6 # Set DefSuffix=CWRR to activate 11-layer CWRR hydrology (default) 
    7 # Sef DefSuffix=Choi to activate 2-layer Choisnel hydrology (obsolete option) 
     6# By default the file orchidee.def_CWRR will be selected. 
    87DefSuffix=CWRR 
    98 
    … …  
    5352        (${SUBMIT_DIR}/PARAM/ping_orchidee.xml, .) ,\ 
    5453        (${MODIPSL}/modeles/ORCHIDEE/src_xml/file_def_orchidee.xml, .)  ,\ 
    55         (${MODIPSL}/modeles/ORCHIDEE/src_xml/file_def_input_orchidee.xml, .) ,\ 
     54        (${MODIPSL}/modeles/ORCHIDEE/src_xml/context_input_orchidee.xml, .) ,\ 
    5655        (${MODIPSL}/modeles/ORCHIDEE/src_xml/context_orchidee.xml, .)   ,\ 
    5756        (${MODIPSL}/modeles/ORCHIDEE/src_xml/field_def_orchidee.xml, .) 
    … …  
    6160 
    6261[OutputText] 
    63 List=   (out_orchidee, orchidee.def, used_orchidee.def, iodef.xml, context_orchidee.xml, field_def_orchidee.xml, file_def_orchidee.xml, file_def_input_orchidee.xml, river_desc.nc, ping_orchidee.xml, dr2xml_orchidee.xml) 
     62List=   (out_orchidee, orchidee.def, used_orchidee.def, iodef.xml, context_orchidee.xml, context_input_orchidee.xml, field_def_orchidee.xml, file_def_orchidee.xml, river_desc.nc, ping_orchidee.xml, dr2xml_orchidee.xml) 
    6463 
    6564[OutputFiles] 
    … …  
    7170Patches = () 
    7271GatherWithInternal = (lon, lat, time_counter, Areas, Contfrac, time_centered, time_centered_bounds) 
    73 TimeSeriesVars2D = (nobiofrac, alb_nir, alb_vis, evap, fluxlat, fluxsens, netrad, qair, rain, runoff, snow, snownobio, snowf, frac_snow, subli, tair, temp_sol, tsol_max, tsol_min, drainage,mrsos, mrso, mrros, mrro, prveg, evspsblveg, evspsblsoi, tran, treeFrac, grassFrac, cropFrac, baresoilFrac, residualFrac, TWBR, riverflow, coastalflow, DelSoilMoist_daily, DelIntercept_daily, DelSWE_daily, delstock_routing, snowmelt, LAImean, transpir, evapnu) 
     72TimeSeriesVars2D = (nobiofrac, alb_nir, alb_vis, evap, fluxlat, fluxsens, netrad, qair, rain, runoff, snow, snownobio, snowf, frac_snow, subli, tair, temp_sol, tsol_max, tsol_min, drainage,mrsos, mrso, mrros, mrro, prveg, evspsblveg, evspsblsoi, tran, treeFrac, grassFrac, cropFrac, baresoilFrac, residualFrac, TWBR, riverflow, coastalflow, DelSoilMoist_daily, DelIntercept_daily, DelSWE_daily, delstock_routing_daily, snowmelt, LAImean, transpir, evapnu) 
    7473ChunckJob2D = NONE 
    7574TimeSeriesVars3D = (lai, maxvegetfrac, vegetfrac, ptn, nee) 

  • CONFIG/UNIFORM/v6/IPSLCM6.2/EXPERIMENTS/LMDZOR/highresmip_CMIP6/config.card

    r4296 r4413  
    3939#-- Compression level for netcdf output files 
    4040CompressionLevel=2 
     41#============================ 
     42#-- Source following file with module settings, only if it exists 
     43EnvFile=`pwd`/../ARCH/arch.env 
    4144 
    4245#======================================================================== 
Note: See TracChangeset for help on using the changeset viewer.