Changeset 6310 for CONFIG

Timestamp:

01/16/23 16:39:12 (15 months ago)

Author:

jgipsl

Message:

Update CREATE experiments by changing the name for files Relief.nc and landiceref.nc due to suppression of these files on the shared repository.

Relief.nc and landiceref.nc were previsouly linking to the files Relief_GMTED2010_15n015_00625deg_plus_GA.nc and landiceref_GA_HR.new.nc but have now been removed(this morning). Therfore, this change doesn't impact the results.

Location:

CONFIG/UNIFORM/v6

Files:

• IPSLCM6.2/EXPERIMENTS/LMDZ/CREATE_amip/COMP/lmdz.card (modified) (1 diff)
• IPSLCM6.2/EXPERIMENTS/LMDZ/CREATE_clim_360d/COMP/lmdz.card (modified) (2 diffs)
• LMDZOR_v6.2/EXPERIMENTS/LMDZ/CREATE_amip/COMP/lmdz.card (modified) (1 diff)
• LMDZOR_v6.2/EXPERIMENTS/LMDZ/CREATE_clim/COMP/lmdz.card (modified) (3 diffs)
• LMDZOR_v6.2/EXPERIMENTS/LMDZ/CREATE_clim_360d/COMP/lmdz.card (modified) (2 diffs)
• LMDZOR_v6.3/EXPERIMENTS/LMDZ/CREATE_amip/COMP/lmdz.card (modified) (1 diff)
• LMDZOR_v6.3/EXPERIMENTS/LMDZ/CREATE_clim_360d/COMP/lmdz.card (modified) (2 diffs)
• LMDZOR_v6.4/EXPERIMENTS/LMDZ/CREATE_amip/COMP/lmdz.card (modified) (1 diff)
• LMDZOR_v6.4/EXPERIMENTS/LMDZ/CREATE_clim_360d/COMP/lmdz.card (modified) (2 diffs)

CONFIG/UNIFORM/v6/IPSLCM6.2/EXPERIMENTS/LMDZ/CREATE_amip/COMP/lmdz.card

@@ -37 +37 @@
         (${R_IN}/ATM/ECDYN.nc.20020101, ECDYN.nc), \
         (${R_IN}/ATM/ECDYN.nc.20020101, ECPHY.nc), \
-        (${R_IN}/ATM/Relief.nc, .), \
+        (${R_IN}/ATM/Relief_GMTED2010_15n015_00625deg_plus_GA.nc, Relief.nc), \
         (${R_IN}/ATM/Rugos.nc, .), \
-        (${R_IN}/ATM/landiceref.nc, .), \
+        (${R_IN}/ATM/landiceref_GA_HR.new.nc, landiceref.nc), \
         (${R_IN}/ATM/START/eORCA1.2xLMD144x142/o2a_v3.nc, o2a.nc)
 
+# Change to use following files for relief and landice if you need to fit to the coupled IPSLCM6.1 version:
+#       (${R_IN}/ATM/Relief_orig.nc, Relief.nc), \
+#       (${R_IN}/ATM/landiceref_orig.nc, landiceref.nc) \
+#
 # Optional: The o2a.nc file is optional and is used to fit with the coupled configuration for the land-sea mask.
 # The o2a file can be removed if it does not correspond to the resolution or zoom. In that case, Relief.nc will be used to calculate the mask land-sea.
-# Use following o2a file to fit with IPSLCM6.0.11 coupled model:
+# Use following o2a file to fit with IPSLCM6.1 coupled model:
 #       (${R_IN}/ATM/START/eORCA1.2xLMD144x142/o2a_v3.nc, o2a.nc)
 # Use following o2a file for regular grid 96x95, correspond to coupled configuration IPSLCM5A2:

CONFIG/UNIFORM/v6/IPSLCM6.2/EXPERIMENTS/LMDZ/CREATE_clim_360d/COMP/lmdz.card

@@ -29 +29 @@
         (${R_IN}/ATM/ECDYN.nc.20020101, ECDYN.nc), \
         (${R_IN}/ATM/ECDYN.nc.20020101, ECPHY.nc), \
-        (${R_IN}/ATM/Relief.nc, .), \
+        (${R_IN}/ATM/Relief_GMTED2010_15n015_00625deg_plus_GA.nc, Relief.nc), \
         (${R_IN}/ATM/Rugos.nc, .), \
-        (${R_IN}/ATM/landiceref.nc, .) \
+        (${R_IN}/ATM/landiceref_GA_HR.new.nc, landiceref.nc) \
         (${R_IN}/ATM/OZONE/UReading/historical.v20160711.v2/original/144x96x66/tro3_1979_2008_clim.nc, climoz.nc), \
         (${R_IN}/ATM/LIMIT/AMIP.v20180427/original/360x180/BCS/amipbc_sst_360x180_1979_2008_clim.nc, amipbc_sst_1x1.nc), \
@@ -37 +37 @@
         (${R_IN}/ATM/START/eORCA1.2xLMD144x142/o2a_v3.nc, o2a.nc)
 
+# Change to use following files for relief and landice if you need to fit to the coupled IPSLCM6.1 version:
+#       (${R_IN}/ATM/Relief_orig.nc, Relief.nc), \
+#       (${R_IN}/ATM/landiceref_orig.nc, landiceref.nc) \
+#
 # Optional: The o2a.nc file is optional and is used to fit with the coupled configuration for the land-sea mask.
 # The o2a file can be removed if it does not correspond to the resolution or zoom. In that case, Relief.nc will be used to calculate the mask land-sea.
-# Use following o2a file to fit with IPSLCM6.0.11 coupled model:
+# Use following o2a file to fit with IPSLCM6.1 coupled model:
 #       (${R_IN}/ATM/START/eORCA1.2xLMD144x142/o2a_v3.nc, o2a.nc)
 # Use following o2a file for regular grid 96x95, correspond to coupled configuration IPSLCM5A2:

CONFIG/UNIFORM/v6/LMDZOR_v6.2/EXPERIMENTS/LMDZ/CREATE_amip/COMP/lmdz.card

@@ -37 +37 @@
         (${R_IN}/ATM/ECDYN.nc.20020101, ECDYN.nc), \
         (${R_IN}/ATM/ECDYN.nc.20020101, ECPHY.nc), \
-        (${R_IN}/ATM/Relief.nc, .), \
+        (${R_IN}/ATM/Relief_GMTED2010_15n015_00625deg_plus_GA.nc, Relief.nc), \
         (${R_IN}/ATM/Rugos.nc, .), \
-        (${R_IN}/ATM/landiceref.nc, .), \
+        (${R_IN}/ATM/landiceref_GA_HR.new.nc, landiceref.nc), \
         (${R_IN}/ATM/START/eORCA1.2xLMD144x142/o2a_v3.nc, o2a.nc)
 
+# Change to use following files for relief and landice if you need to fit to the coupled IPSLCM6.1 version:
+#       (${R_IN}/ATM/Relief_orig.nc, Relief.nc), \
+#       (${R_IN}/ATM/landiceref_orig.nc, landiceref.nc) \
+#
 # Optional: The o2a.nc file is optional and is used to fit with the coupled configuration for the land-sea mask.
 # The o2a file can be removed if it does not correspond to the resolution or zoom. In that case, Relief.nc will be used to calculate the mask land-sea.
-# Use following o2a file to fit with IPSLCM6.0.11 coupled model:
+# Use following o2a file to fit with IPSLCM6.1 coupled model:
 #       (${R_IN}/ATM/START/eORCA1.2xLMD144x142/o2a_v3.nc, o2a.nc)
 # Use following o2a file for regular grid 96x95, correspond to coupled configuration IPSLCM5A2:

CONFIG/UNIFORM/v6/LMDZOR_v6.2/EXPERIMENTS/LMDZ/CREATE_clim/COMP/lmdz.card

@@ -6 +6 @@
 [UserChoices]
 # Physics package to use
-LMDZ_Physics=NPv6.1
+LMDZ_Physics=NPv6.2
 
 # Manage radiative aerosol effect and ozone 
@@ -29 +29 @@
         (${R_IN}/ATM/ECDYN.nc.20020101, ECDYN.nc), \
         (${R_IN}/ATM/ECDYN.nc.20020101, ECPHY.nc), \
-        (${R_IN}/ATM/Relief.nc, .), \
+        (${R_IN}/ATM/Relief_GMTED2010_15n015_00625deg_plus_GA.nc, Relief.nc), \
         (${R_IN}/ATM/Rugos.nc, .), \
-        (${R_IN}/ATM/landiceref.nc, .) \
+        (${R_IN}/ATM/landiceref_GA_HR.new.nc, landiceref.nc) \
         (${R_IN}/ATM/OZONE/UReading/historical.v20160711.v2/original/144x96x66/tro3_1979_2008_clim.nc, climoz.nc), \
         (${R_IN}/ATM/LIMIT/AMIP.v20180427/original/360x180/BCS/amipbc_sst_360x180_1979_2008_clim.nc, amipbc_sst_1x1.nc), \
@@ -37 +37 @@
         (${R_IN}/ATM/START/eORCA1.2xLMD144x142/o2a_v3.nc, o2a.nc)
 
+# Change to use following files for relief and landice if you need to fit to the coupled IPSLCM6.1 version:
+#       (${R_IN}/ATM/Relief_orig.nc, Relief.nc), \
+#       (${R_IN}/ATM/landiceref_orig.nc, landiceref.nc) \
+#
 # Optional: The o2a.nc file is optional and is used to fit with the coupled configuration for the land-sea mask.
 # The o2a file can be removed if it does not correspond to the resolution or zoom. In that case, Relief.nc will be used to calculate the mask land-sea.
-# Use following o2a file to fit with IPSLCM6.0.11 coupled model:
+# Use following o2a file to fit with IPSLCM6.1 coupled model:
 #       (${R_IN}/ATM/START/eORCA1.2xLMD144x142/o2a_v3.nc, o2a.nc)
 # Use following o2a file for regular grid 96x95, correspond to coupled configuration IPSLCM5A2:

CONFIG/UNIFORM/v6/LMDZOR_v6.2/EXPERIMENTS/LMDZ/CREATE_clim_360d/COMP/lmdz.card

@@ -29 +29 @@
         (${R_IN}/ATM/ECDYN.nc.20020101, ECDYN.nc), \
         (${R_IN}/ATM/ECDYN.nc.20020101, ECPHY.nc), \
-        (${R_IN}/ATM/Relief.nc, .), \
+        (${R_IN}/ATM/Relief_GMTED2010_15n015_00625deg_plus_GA.nc, Relief.nc), \
         (${R_IN}/ATM/Rugos.nc, .), \
-        (${R_IN}/ATM/landiceref.nc, .) \
+        (${R_IN}/ATM/landiceref_GA_HR.new.nc, landiceref.nc) \
         (${R_IN}/ATM/OZONE/UReading/historical.v20160711.v2/original/144x96x66/tro3_1979_2008_clim.nc, climoz.nc), \
         (${R_IN}/ATM/LIMIT/AMIP.v20180427/original/360x180/BCS/amipbc_sst_360x180_1979_2008_clim.nc, amipbc_sst_1x1.nc), \
@@ -37 +37 @@
         (${R_IN}/ATM/START/eORCA1.2xLMD144x142/o2a_v3.nc, o2a.nc)
 
+# Change to use following files for relief and landice if you need to fit to the coupled IPSLCM6.1 version:
+#       (${R_IN}/ATM/Relief_orig.nc, Relief.nc), \
+#       (${R_IN}/ATM/landiceref_orig.nc, landiceref.nc) \
+#
 # Optional: The o2a.nc file is optional and is used to fit with the coupled configuration for the land-sea mask.
 # The o2a file can be removed if it does not correspond to the resolution or zoom. In that case, Relief.nc will be used to calculate the mask land-sea.
-# Use following o2a file to fit with IPSLCM6.0.11 coupled model:
+# Use following o2a file to fit with IPSLCM6.1 coupled model:
 #       (${R_IN}/ATM/START/eORCA1.2xLMD144x142/o2a_v3.nc, o2a.nc)
 # Use following o2a file for regular grid 96x95, correspond to coupled configuration IPSLCM5A2:

CONFIG/UNIFORM/v6/LMDZOR_v6.3/EXPERIMENTS/LMDZ/CREATE_amip/COMP/lmdz.card

@@ -37 +37 @@
         (${R_IN}/ATM/ECDYN.nc.20020101, ECDYN.nc), \
         (${R_IN}/ATM/ECDYN.nc.20020101, ECPHY.nc), \
-        (${R_IN}/ATM/Relief.nc, .), \
+        (${R_IN}/ATM/Relief_GMTED2010_15n015_00625deg_plus_GA.nc, Relief.nc), \
         (${R_IN}/ATM/Rugos.nc, .), \
-        (${R_IN}/ATM/landiceref.nc, .), \
+        (${R_IN}/ATM/landiceref_GA_HR.new.nc, landiceref.nc), \
         (${R_IN}/ATM/START/eORCA1.2xLMD144x142/o2a_v3.nc, o2a.nc)
 
+# Change to use following files for relief and landice if you need to fit to the coupled IPSLCM6.1 version:
+#       (${R_IN}/ATM/Relief_orig.nc, Relief.nc), \
+#       (${R_IN}/ATM/landiceref_orig.nc, landiceref.nc) \
+#
 # Optional: The o2a.nc file is optional and is used to fit with the coupled configuration for the land-sea mask.
 # The o2a file can be removed if it does not correspond to the resolution or zoom. In that case, Relief.nc will be used to calculate the mask land-sea.
-# Use following o2a file to fit with IPSLCM6.0.11 coupled model:
+# Use following o2a file to fit with IPSLCM6.1 coupled model:
 #       (${R_IN}/ATM/START/eORCA1.2xLMD144x142/o2a_v3.nc, o2a.nc)
 # Use following o2a file for regular grid 96x95, correspond to coupled configuration IPSLCM5A2:

CONFIG/UNIFORM/v6/LMDZOR_v6.3/EXPERIMENTS/LMDZ/CREATE_clim_360d/COMP/lmdz.card

@@ -29 +29 @@
         (${R_IN}/ATM/ECDYN.nc.20020101, ECDYN.nc), \
         (${R_IN}/ATM/ECDYN.nc.20020101, ECPHY.nc), \
-        (${R_IN}/ATM/Relief.nc, .), \
+        (${R_IN}/ATM/Relief_GMTED2010_15n015_00625deg_plus_GA.nc, Relief.nc), \
         (${R_IN}/ATM/Rugos.nc, .), \
-        (${R_IN}/ATM/landiceref.nc, .) \
+        (${R_IN}/ATM/landiceref_GA_HR.new.nc, landiceref.nc) \
         (${R_IN}/ATM/OZONE/UReading/historical.v20160711.v2/original/144x96x66/tro3_1979_2008_clim.nc, climoz.nc), \
         (${R_IN}/ATM/LIMIT/AMIP.v20180427/original/360x180/BCS/amipbc_sst_360x180_1979_2008_clim.nc, amipbc_sst_1x1.nc), \
@@ -37 +37 @@
         (${R_IN}/ATM/START/eORCA1.2xLMD144x142/o2a_v3.nc, o2a.nc)
 
+# Change to use following files for relief and landice if you need to fit to the coupled IPSLCM6.1 version:
+#       (${R_IN}/ATM/Relief_orig.nc, Relief.nc), \
+#       (${R_IN}/ATM/landiceref_orig.nc, landiceref.nc) \
+#
 # Optional: The o2a.nc file is optional and is used to fit with the coupled configuration for the land-sea mask.
 # The o2a file can be removed if it does not correspond to the resolution or zoom. In that case, Relief.nc will be used to calculate the mask land-sea.
-# Use following o2a file to fit with IPSLCM6.0.11 coupled model:
+# Use following o2a file to fit with IPSLCM6.1 coupled model:
 #       (${R_IN}/ATM/START/eORCA1.2xLMD144x142/o2a_v3.nc, o2a.nc)
 # Use following o2a file for regular grid 96x95, correspond to coupled configuration IPSLCM5A2:

CONFIG/UNIFORM/v6/LMDZOR_v6.4/EXPERIMENTS/LMDZ/CREATE_amip/COMP/lmdz.card

@@ -37 +37 @@
         (${R_IN}/ATM/ECDYN.nc.20020101, ECDYN.nc), \
         (${R_IN}/ATM/ECDYN.nc.20020101, ECPHY.nc), \
-        (${R_IN}/ATM/Relief.nc, .), \
+        (${R_IN}/ATM/Relief_GMTED2010_15n015_00625deg_plus_GA.nc, Relief.nc), \
         (${R_IN}/ATM/Rugos.nc, .), \
-        (${R_IN}/ATM/landiceref.nc, .), \
+        (${R_IN}/ATM/landiceref_GA_HR.new.nc, landiceref.nc), \
         (${R_IN}/ATM/START/eORCA1.2xLMD144x142/o2a_v3.nc, o2a.nc)
 
+# Change to use following files for relief and landice if you need to fit to the coupled IPSLCM6.1 version:
+#       (${R_IN}/ATM/Relief_orig.nc, Relief.nc), \
+#       (${R_IN}/ATM/landiceref_orig.nc, landiceref.nc) \
+#
 # Optional: The o2a.nc file is optional and is used to fit with the coupled configuration for the land-sea mask.
 # The o2a file can be removed if it does not correspond to the resolution or zoom. In that case, Relief.nc will be used to calculate the mask land-sea.
-# Use following o2a file to fit with IPSLCM6.0.11 coupled model:
+# Use following o2a file to fit with IPSLCM6.1 coupled model:
 #       (${R_IN}/ATM/START/eORCA1.2xLMD144x142/o2a_v3.nc, o2a.nc)
 # Use following o2a file for regular grid 96x95, correspond to coupled configuration IPSLCM5A2:

CONFIG/UNIFORM/v6/LMDZOR_v6.4/EXPERIMENTS/LMDZ/CREATE_clim_360d/COMP/lmdz.card

@@ -29 +29 @@
         (${R_IN}/ATM/ECDYN.nc.20020101, ECDYN.nc), \
         (${R_IN}/ATM/ECDYN.nc.20020101, ECPHY.nc), \
-        (${R_IN}/ATM/Relief.nc, .), \
+        (${R_IN}/ATM/Relief_GMTED2010_15n015_00625deg_plus_GA.nc, Relief.nc), \
         (${R_IN}/ATM/Rugos.nc, .), \
-        (${R_IN}/ATM/landiceref.nc, .) \
+        (${R_IN}/ATM/landiceref_GA_HR.new.nc, landiceref.nc) \
         (${R_IN}/ATM/OZONE/UReading/historical.v20160711.v2/original/144x96x66/tro3_1979_2008_clim.nc, climoz.nc), \
         (${R_IN}/ATM/LIMIT/AMIP.v20180427/original/360x180/BCS/amipbc_sst_360x180_1979_2008_clim.nc, amipbc_sst_1x1.nc), \
@@ -37 +37 @@
         (${R_IN}/ATM/START/eORCA1.2xLMD144x142/o2a_v3.nc, o2a.nc)
 
+# Change to use following files for relief and landice if you need to fit to the coupled IPSLCM6.1 version:
+#       (${R_IN}/ATM/Relief_orig.nc, Relief.nc), \
+#       (${R_IN}/ATM/landiceref_orig.nc, landiceref.nc) \
+#
 # Optional: The o2a.nc file is optional and is used to fit with the coupled configuration for the land-sea mask.
 # The o2a file can be removed if it does not correspond to the resolution or zoom. In that case, Relief.nc will be used to calculate the mask land-sea.
-# Use following o2a file to fit with IPSLCM6.0.11 coupled model:
+# Use following o2a file to fit with IPSLCM6.1 coupled model:
 #       (${R_IN}/ATM/START/eORCA1.2xLMD144x142/o2a_v3.nc, o2a.nc)
 # Use following o2a file for regular grid 96x95, correspond to coupled configuration IPSLCM5A2: