Index: /CONFIG/UNIFORM/v6/IPSLCM6.3/GENERAL/PARAM/gcm.def_144x142_NPv6.2
===================================================================
--- /CONFIG/UNIFORM/v6/IPSLCM6.3/GENERAL/PARAM/gcm.def_144x142_NPv6.2	(revision 6531)
+++ /CONFIG/UNIFORM/v6/IPSLCM6.3/GENERAL/PARAM/gcm.def_144x142_NPv6.2	(revision 6531)
@@ -0,0 +1,1 @@
+link gcm.def_144x142_NPv6.1
Index: /CONFIG/UNIFORM/v6/IPSLCM6.3/GENERAL/PARAM/gcm.def_144x142_NPv6.2_strataer
===================================================================
--- /CONFIG/UNIFORM/v6/IPSLCM6.3/GENERAL/PARAM/gcm.def_144x142_NPv6.2_strataer	(revision 6531)
+++ /CONFIG/UNIFORM/v6/IPSLCM6.3/GENERAL/PARAM/gcm.def_144x142_NPv6.2_strataer	(revision 6531)
@@ -0,0 +1,57 @@
+## $Id: gcm.def_144x142_NPv6.1 3668 2018-03-20 14:55:33Z lfairhead $
+## nombre de pas par jour (multiple de iperiod) 
+## ( day_step=672 => dt=2.15min or 15mn/7, physique toutes les 15 mn )
+day_step=672
+## periode pour le pas Matsuno (en pas)
+iperiod=7
+## choix de l'operateur de dissipation (star ou  non star )
+lstardis=y
+## nombre d'iterations de l'operateur de dissipation   gradiv
+nitergdiv=1
+## nombre d'iterations de l'operateur de dissipation  nxgradrot
+nitergrot=2
+## nombre d'iterations de l'operateur de dissipation  divgrad            
+niterh=2
+## temps de dissipation des plus petites long.d ondes pour u,v (gradiv)  
+tetagdiv=3600.
+## temps de dissipation des plus petites long.d ondes pour u,v(nxgradrot)
+tetagrot=21600.
+## temps de dissipation des plus petites long.d ondes pour  h ( divgrad) 
+tetatemp=10800.
+## coefficient pour gamdissip                                            
+coefdis=0.
+## choix du shema d'integration temporelle (Matsuno:y ou Matsuno-leapfrog:n) 
+purmats=n
+## avec ou sans physique
+## 0: pas de physique (e.g. en mode Shallow Water)
+## 1: avec physique (e.g. physique phylmd)
+## 2: avec rappel newtonien dans la dynamique                                         
+iflag_phys=1
+## avec ou sans fichiers de demarrage (start.nc, startphy.nc) ?
+## (sans fichiers de demarrage, initialisation des champs par iniacademic
+##  dans la dynamique)
+read_start=y
+## periode de la physique (en pas dynamiques, n'a de sens que si iflag_phys=1)                                       
+iphysiq=7
+## longitude en degres du centre du zoom                                 
+clon=0.
+## latitude en degres du centre du zoom                                  
+clat=0.
+## facteur de grossissement du zoom,selon longitude                      
+grossismx=1.0
+## facteur de grossissement du zoom ,selon latitude                      
+grossismy=1.0
+##  Fonction  f(y)  hyperbolique  si = .true.  , sinon  sinusoidale         
+fxyhypb=y
+## extension en longitude  de la zone du zoom  ( fraction de la zone totale)
+dzoomx=0.0
+## extension en latitude de la zone  du zoom  ( fraction de la zone totale)
+dzoomy=0.0
+##raideur du zoom en  X
+taux=3.
+##raideur du zoom en  Y
+tauy=3.
+##  Fonction  f(y) avec y = Sin(latit.) si = .true. , sinon y = latit.         
+ysinus=y
+##
+ngroup=4
Index: /CONFIG/UNIFORM/v6/IPSLCM6.3/GENERAL/PARAM/gcm.def_256x256_NPv6.2_MR025
===================================================================
--- /CONFIG/UNIFORM/v6/IPSLCM6.3/GENERAL/PARAM/gcm.def_256x256_NPv6.2_MR025	(revision 6531)
+++ /CONFIG/UNIFORM/v6/IPSLCM6.3/GENERAL/PARAM/gcm.def_256x256_NPv6.2_MR025	(revision 6531)
@@ -0,0 +1,1 @@
+link gcm.def_256x256_NPv6.1_MR1
Index: /CONFIG/UNIFORM/v6/IPSLCM6.3/GENERAL/PARAM/gcm.def_256x256_NPv6.2_MR1
===================================================================
--- /CONFIG/UNIFORM/v6/IPSLCM6.3/GENERAL/PARAM/gcm.def_256x256_NPv6.2_MR1	(revision 6531)
+++ /CONFIG/UNIFORM/v6/IPSLCM6.3/GENERAL/PARAM/gcm.def_256x256_NPv6.2_MR1	(revision 6531)
@@ -0,0 +1,1 @@
+link gcm.def_256x256_NPv6.1_MR1
Index: /CONFIG/UNIFORM/v6/IPSLCM6.3/GENERAL/PARAM/namcouple_ESMCO2AER_ORCA1xLMD144142
===================================================================
--- /CONFIG/UNIFORM/v6/IPSLCM6.3/GENERAL/PARAM/namcouple_ESMCO2AER_ORCA1xLMD144142	(revision 6531)
+++ /CONFIG/UNIFORM/v6/IPSLCM6.3/GENERAL/PARAM/namcouple_ESMCO2AER_ORCA1xLMD144142	(revision 6531)
@@ -0,0 +1,487 @@
+###############################################################################
+#
+#      Input file for OASIS3
+# 
+#      This version is for use with IPSL_CM4_v1 
+#
+#      The file will be edited at runtime to update it for
+#         - the initial date of the run
+#
+###############################################################################
+#  
+#      Input delimiters have to occupy position 1 to 9 !
+#      No blank lines allowed !
+#      Length of input lines <= 80 !
+#
+###############################################################################
+#
+# NFIELDS : total number of fields being exchanged.
+#
+ $NFIELDS
+            30
+ $END
+###############################################################################
+#
+# NBMODEL : number of models and their names (CHAR*6).
+#
+ $NBMODEL
+  2  LMDZ oceanx
+ $END
+###############################################################################
+# 
+# RUNTIME: total simulated time for the actual run in seconds (<I8)
+#
+ $RUNTIME
+  <total_time>
+ $END
+###############################################################################
+#
+# NLOGPRT: printing level in debug file : 
+#
+ $NLOGPRT
+   0 <lucia_ok>
+ $END
+# 
+###############################################################################
+ $STRINGS
+###############################################################################
+#
+#                      OCEAN  --->>>  ATMOS
+#                      --------------------
+# Field 1 : Weighted sea surface temperature (o->a 1)
+# 
+O_SSTSST  SISUTESW 1 <freq_coupling>  2  sstoc.nc  <output_mode> 
+362 332 144 143 torc  tlmd  LAG=<lag_oce>
+P  2 P  0
+LOCTRANS MAPPING
+# LOCTRANS: AVERAGE to average value over coupling period
+ AVERAGE
+# CHECKIN: indicate computation of global, land and sea field integrals.
+# Mozaic: 1) mapping filename 2) connected unit 3) dataset rank 4) Maximum
+#         number of overlapped neighbors
+rmp_torc_to_tlmd_MOSAIC.nc src
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+#
+############################################################################
+#
+# Field 2 : Sea ice extent  (o->a 2)
+#
+OIceFrc SIICECOV 44 <freq_coupling>  2  sstoc.nc <output_mode>
+362 332 144 143 torc  tlmd   LAG=<lag_oce>
+P  2 P  0
+#
+LOCTRANS MAPPING
+ AVERAGE
+# CHECKIN: indicate computation of global, land and sea field integrals.
+#
+rmp_torc_to_tlmd_MOSAIC.nc src
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+#
+#
+############################################################################
+#
+# Field 3 : Weighted Sea Ice Temperature (o->a 3)
+#
+O_TepIce  SIICTEMW 34 <freq_coupling>  2  sstoc.nc  <output_mode>
+362 332 144 143 torc  tlmd   LAG=<lag_oce>
+P  2 P  0
+LOCTRANS MAPPING
+ AVERAGE
+# CHECKIN: indicate computation of global, land and sea field integrals.
+# 
+rmp_torc_to_tlmd_MOSAIC.nc src
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+#
+############################################################################
+#
+# Field 4 : Weighted Sea ice albedo (o->a 4)
+#
+O_AlbIce  SIICEALW 17 <freq_coupling>  2  sstoc.nc  <output_mode>
+362 332 144 143 torc  tlmd  LAG=<lag_oce>  
+P  2 P  0
+#
+LOCTRANS MAPPING
+ AVERAGE
+# CHECKIN: indicate computation of global, land and sea field integrals.
+#
+rmp_torc_to_tlmd_MOSAIC.nc src
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+#
+#
+############################################################################
+#
+# Field 5 : Current surface (o->a 5)
+O_OCurx1 CURRENTX 321 <freq_coupling>  2  sstoc.nc  <output_mode>
+362 332 144 143 torc    tlmd  LAG=<lag_oce>
+P  2 P  0
+LOCTRANS MAPPING
+ AVERAGE
+# CHECKIN: indicate computation of global, land and sea field integrals.
+#
+rmp_torc_to_tlmd_MOSAIC.nc src
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+#
+#
+############################################################################
+#
+# Field 6 : Current surface (o->a 6)
+O_OCury1 CURRENTY 321 <freq_coupling>  2  sstoc.nc  <output_mode>
+362 332 144 143 torc    tlmd  LAG=<lag_oce>
+P  2 P  0
+LOCTRANS MAPPING
+ AVERAGE
+# CHECKIN: indicate computation of global, land and sea field integrals.
+#
+rmp_torc_to_tlmd_MOSAIC.nc src
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+#  
+############################################################################
+#
+# Field 7 : Current surface (o->a 7)
+O_OCurz1 CURRENTZ 321 <freq_coupling>  2  sstoc.nc  <output_mode>
+362 332 144 143 torc    tlmd  LAG=<lag_oce>
+P  2 P  0
+LOCTRANS MAPPING
+ AVERAGE
+# CHECKIN: indicate computation of global, land and sea field integrals.
+#
+rmp_torc_to_tlmd_MOSAIC.nc src
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+#
+###########################################################################
+#
+# Field 8 : Ocean Carbon flux  (o->a 8)
+O_CO2FLX SICO2FLX 38  <freq_coupling>  2  sstoc.nc  <output_mode>
+362 332 144 143 torc  tlmd  LAG=<lag_oce>
+P  30 P  3
+LOCTRANS MAPPING
+ AVERAGE
+# CHECKIN: indicate computation of global, land and sea field
+#
+rmp_torc_to_tlmd_MOSAIC.nc src
+# CHECKOUT: indicate computation of global, land and sea fiel
+#
+#
+###########################################################################
+#
+#                     OCEAN   --->>>   INCA
+#                     ---------------------
+###########################################################################
+#
+# Field 9 : Ocean DMS flux  (o->a 9)
+O_DMSFLX SIDMSFLX 39  <freq_coupling>  2  sstoc.nc  <output_mode>
+362 332 144 143 torc  tlmd  LAG=<lag_oce>
+P  30 P  3
+LOCTRANS MAPPING
+ AVERAGE
+# CHECKIN: indicate computation of global, land and sea field
+#
+rmp_torc_to_tlmd_MOSAIC.nc src
+# CHECKOUT: indicate computation of global, land and sea field
+#
+#
+############################################################################
+#
+#                      ATMOSPHERE  --->>>  OCEAN
+#                      -------------------------
+############################################################################   
+#
+# Field 10 : wind stress along X axis (a->o 1)
+#
+COTAUXXU O_OTaux1 23 <freq_coupling>  1  flxat.nc   <output_mode>
+144 143 362 332 tlmd    uorc  LAG=<lag_atm> 
+P  0 P  2
+MAPPING
+# CHECKIN: indicate computation of global, land and sea field integrals.
+# Interpolation method ou parametres mozaic
+rmp_tlmd_to_uorc_BILINEAR_Corrected.nc dst
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+#
+###########################################################################
+#
+# Field 11 : stress along Y axis (a->o 2)
+#
+COTAUYYU O_OTauy1 23 <freq_coupling>  1  flxat.nc  <output_mode>
+144 143 362 332 tlmd    uorc  LAG=<lag_atm> 
+P  0 P  2
+MAPPING
+# CHECKIN: indicate computation of global, land and sea field integrals.
+# Interpolation method ou parametres mozaic
+rmp_tlmd_to_uorc_BILINEAR_Corrected.nc dst
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+#
+###########################################################################
+#
+# Field 12 :wind stress along Z axis (a->o 3)
+#
+COTAUZZU O_OTauz1 23 <freq_coupling>  1  flxat.nc  <output_mode>
+144 143 362 332 tlmd    uorc  LAG=<lag_atm> 
+P  0 P  2
+MAPPING
+# CHECKIN: indicate computation of global, land and sea field integrals.
+# Interpolation method ou parametres mozaic
+rmp_tlmd_to_uorc_BILINEAR_Corrected.nc dst
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+#
+##########################################################################
+#
+# Field 13 : wind stress along X axis 2 (a->o 4)
+#
+COTAUXXV O_OTaux2  24 <freq_coupling>  1    flxat.nc  <output_mode>
+144 143 362 332 tlmd    vorc  LAG=<lag_atm> 
+P  0 P  2
+SCRIPR
+# CHECKIN: indicate computation of global, land and sea field integrals.
+BILINEAR LR SCALAR LATLON 10
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+#
+##########################################################################
+#
+# Field 14 : wind stress along Y axis 2 (a->o 5) 
+#
+COTAUYYV O_OTauy2  24 <freq_coupling>  1    flxat.nc  <output_mode>
+144 143 362 332 tlmd    vorc  LAG=<lag_atm>
+P  0 P  2
+SCRIPR
+# CHECKIN: indicate computation of global, land and sea field integrals.
+BILINEAR LR SCALAR LATLON 10
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+#
+##########################################################################
+#
+# Field 15 :  wind stress along Z axis 2 (a->o 6) 
+#
+COTAUZZV O_OTauz2  24 <freq_coupling>  1    flxat.nc  <output_mode>
+144 143 362 332 tlmd    vorc  LAG=<lag_atm>
+P  0 P  2
+SCRIPR
+# CHECKIN: indicate computation of global, land and sea field integrals.
+BILINEAR LR SCALAR LATLON 10
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+#
+#########################################################################
+#
+# Field 16 :  wind speed 10m (a->o 7) 
+#
+COWINDSP O_Wind10  56 <freq_coupling>  1    flxat.nc  <output_mode>
+144 143 362 332 tlmd    torc  LAG=<lag_atm>
+P  0 P  2
+MAPPING
+# CHECKIN: indicate computation of global, land and sea field integrals.
+# Interpolation method ou parametres mozaic
+rmp_tlmd_to_torc_BILINEAR_Corrected.nc dst
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+# 
+#########################################################################
+#
+# Field 17 : Total rain (a->o 8)
+#
+COTOTRAI OTotRain 26 <freq_coupling>  1   flxat.nc   <output_mode>
+144 143 362 332 tlmd    torc  LAG=<lag_atm> 
+P  0 P  2
+MAPPING
+# CHECKIN: indicate computation of global, land and sea field integrals.
+# Interpolation method ou parametres mozaic
+rmp_tlmd_to_torc_MOSAIC.nc dst
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+#
+##########################################################################
+#
+# Field 18 :  Total snow (a->o 9)
+#
+COTOTSNO  OTotSnow 28 <freq_coupling>  1   flxat.nc   <output_mode>
+144 143 362 332 tlmd    torc  LAG=<lag_atm> 
+P  0 P  2
+MAPPING
+# CHECKIN: indicate computation of global, land and sea field integrals.
+# Interpolation method ou parametres mozaic
+rmp_tlmd_to_torc_MOSAIC.nc dst
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+#
+#########################################################################
+#
+# Field 19 : Total evap (a->o 10)
+#
+COTOTEVA  OTotEvap 25 <freq_coupling>  1   flxat.nc   <output_mode>
+144 143 362 332 tlmd    torc  LAG=<lag_atm> 
+P  0 P  2
+MAPPING
+# CHECKIN: indicate computation of global, land and sea field integrals.
+# Interpolation method ou parametres mozaic
+rmp_tlmd_to_torc_MOSAIC.nc dst
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+#
+##########################################################################
+#
+# Field 20 : Evaporation Ice  (a->o 11)
+#
+COICEVAP OIceEvap 41 <freq_coupling>  1   flxat.nc   <output_mode>
+144 143 362 332 tlmd    torc  LAG=<lag_atm> 
+P  0 P  2
+MAPPING
+# CHECKIN: indicate computation of global, land and sea field integrals.
+# Interpolation method ou parametres mozaic
+rmp_tlmd_to_torc_MOSAIC.nc dst
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+#
+##########################################################################
+#
+# Field 21 : Total solar heat flux (a->o 12)
+#
+COQSRMIX O_QsrMix  7 <freq_coupling> 1   flxat.nc  <output_mode>
+144 143 362 332 tlmd    torc  LAG=<lag_atm>
+P  0 P  2
+MAPPING
+# CHECKIN: indicate computation of global, land and sea field integrals.
+# Interpolation method or mozaic parameters
+rmp_tlmd_to_torc_MOSAIC.nc dst
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+#
+#########################################################################
+#
+# Field 22 : Total Non solar heat flux (a->o 13)
+#
+COQNSMIX O_QnsMix 6 <freq_coupling>  1   flxat.nc  <output_mode>
+144 143 362 332 tlmd    torc   LAG=<lag_atm>
+P  0 P  2
+MAPPING
+# CHECKIN: indicate computation of global, land and sea field integrals.
+# Interpolation method ou parametres mozaic
+rmp_tlmd_to_torc_MOSAIC.nc dst
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+#
+###########################################################################
+#
+# Field 23 : solar heat flux on ice (a->o 14)
+#
+COSHFICE O_QsrIce  7 <freq_coupling> 1   flxat.nc  <output_mode>
+144 143 362 332 tlmd    torc  LAG=<lag_atm>
+P  0 P  2
+MAPPING
+# CHECKIN: indicate computation of global, land and sea field integrals.
+# Interpolation method or mozaic parameters
+rmp_tlmd_to_torc_MOSAIC.nc dst
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+#
+############################################################################
+#
+# Field 24 : Non solar heat flux on ice (a->o 15)
+#
+CONSFICE O_QnsIce 6 <freq_coupling>  1  flxat.nc  <output_mode>
+144 143 362 332 tlmd    torc  LAG=<lag_atm>
+P  0 P  2
+MAPPING
+# CHECKIN: indicate computation of global, land and sea field integrals.
+# Interpolation method ou parametres mozaic
+rmp_tlmd_to_torc_MOSAIC.nc dst
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+#
+############################################################################
+#
+# Field 25 : Non solar heat flux derivative (a->o 16)
+#
+CODFLXDT O_dQnsdT  35 <freq_coupling>  1   flxat.nc  <output_mode>
+144 143 362 332 tlmd    torc  LAG=<lag_atm>
+P  0 P  2
+MAPPING
+# CHECKIN: indicate computation of global, land and sea field integrals.
+# Interpolation method ou parametres mozaic
+rmp_tlmd_to_torc_MOSAIC.nc dst
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+#
+#########################################################################
+#
+# Field 26 : iceberg calving north (a->o 17)
+#
+COCALVIN OCalving  36 <freq_coupling_roff_calv>  2  flxat.nc  <output_mode>
+144 143 362 332 tlmd    torc  LAG=<lag_atm_roff_calv> 
+P  0 P  2
+LOCTRANS MAPPING
+AVERAGE
+# CHECKIN: indicate computation of global, land and sea field integrals.
+# Interpolation method ou parametres mozaic
+rmp_tlmd_to_torc_MOSAIC_calving_nosouth.nc dst
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+#
+#########################################################################
+#
+# Field 27 : iceberg melting (a->o 17)
+#
+COCALVIN OIceberg  36 <freq_coupling_roff_calv>  3  icbrg.nc  <output_mode>
+144 143 362 332 tlmd    torc  LAG=<lag_atm_roff_calv> 
+P  0 P  2
+LOCTRANS MAPPING BLASNEW
+AVERAGE
+# CHECKIN: indicate computation of global, land and sea field integrals.
+# Interpolation method ou parametres mozaic
+rmp_tlmd_to_torc_MOSAIC_calving_iceberg.nc dst
+0.5 0
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+#########################################################################
+#
+# Field 28 : ice shelf melting (a->o 17)
+#
+COCALVIN OIcshelf  36 <freq_coupling_roff_calv>  3  icshf.nc  <output_mode>
+144 143 362 332 tlmd    torc  LAG=<lag_atm_roff_calv> 
+P  0 P  2
+LOCTRANS MAPPING BLASNEW
+AVERAGE
+# CHECKIN: indicate computation of global, land and sea field integrals.
+# Interpolation method ou parametres mozaic
+rmp_tlmd_to_torc_MOSAIC_calving_iceshelf.nc dst
+0.5 0
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+##########################################################################
+#
+# Field 29 : liquid run-off (river + direct)  (a->o 18)
+#
+COLIQRUN  O_Runoff 32 <freq_coupling_roff_calv>  4  flxat.nc   <output_mode>
+144 143 362 332 aone  torc  LAG=<lag_atm_roff_calv> 
+P  0 P  2
+LOCTRANS MAPPING CONSERV BLASNEW
+AVERAGE
+# Interpolation method ou parametres mozaic
+# weights convert from kg/s to kg/m^2/s
+rmp_tlmd_to_torc_MOSAIC_rivflu.nc dst
+# CONSERV
+GLOBAL bfb
+# change units from m/s to kg/s
+1000.0 0
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+#
+#########################################################################
+#
+# Field 30 : atmospheric CO2 concentration  (a->o 24)
+#
+COATMCO2 O_AtmCO2 37 <freq_coupling>  1   flxat.nc   <output_mode>
+144 143 362 332 tlmd    torc  LAG=<lag_atm>
+P  30 P  3
+MAPPING
+# CHECKIN: indicate computation of global, land and sea field integrals.
+# Interpolation method ou parametres mozaic
+rmp_tLMD144X142_to_teORCA1.2_1storder.nc dst
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+#
+#########################################################################
+# Field 26 : wind stress module (a->o 19)
+#
+##COTAUMOD  O_TauMod 466 <freq_coupling>  6   flxat.nc   <output_mode>
+##tlmd    torc  LAG=<lag_atm> 
+##P  0 P  2
+##INVERT CHECKIN MASK EXTRAP INTERP CHECKOUT
+# Reverse
+##NORSUD WSTEST
+# CHECKIN: indicate computation of global, land and sea field integrals.
+## INT=1
+# Mask value
+##888888.
+# Extrapolation method
+##NINENN 2 1 1
+# Interpolation method
+##BICUBIPS  Z   SCALAR
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+## INT=1
+#
+#########################################################################
+#
+ $END
Index: /CONFIG/UNIFORM/v6/IPSLCM6.3/GENERAL/PARAM/namelist_ESMCO2AER_ORCA1_cfg
===================================================================
--- /CONFIG/UNIFORM/v6/IPSLCM6.3/GENERAL/PARAM/namelist_ESMCO2AER_ORCA1_cfg	(revision 6531)
+++ /CONFIG/UNIFORM/v6/IPSLCM6.3/GENERAL/PARAM/namelist_ESMCO2AER_ORCA1_cfg	(revision 6531)
@@ -0,0 +1,425 @@
+
+!!>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
+!! NEMO/OPA  Configuration namelist : used to overwrite defaults values defined in SHARED/namelist_ref
+!!>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
+!
+!-----------------------------------------------------------------------
+&namrun        !   parameters of the run
+!-----------------------------------------------------------------------
+   cn_exp      = _AUTOBLOCKER_    !  Experience name
+   nn_it000    = _AUTOBLOCKER_    !  First time step
+   nn_itend    = _AUTOBLOCKER_    !  Last  time step
+   nn_date0    = _AUTOBLOCKER_    !  Date at nit_0000 (format yyyymmdd) used if ln_rstart=F or (ln_rstart=T and nn_rstctl=0 or 1)
+   nn_leapy    = _AUTOBLOCKER_    !  Leap year calendar (1) or not (0)
+   ln_rstart   = _AUTOBLOCKER_    !  start from rest (F) or from a restart file (T)
+   ln_rstart_ts = _AUTOBLOCKER_   !  start from rest for current only (F) or from a restart file (T)
+   nn_rstctl   = _AUTOBLOCKER_    !  Restart control => activated only if ln_rstart = T
+                           !    = 0 nn_date0 read in namelist ; nn_it000 : read in namelist
+                           !    = 1 nn_date0 read in namelist ; nn_it000 : check consistancy between namelist and restart
+                           !    = 2 nn_date0 read in restart  ; nn_it000 : check consistancy between namelist and restart
+   cn_ocerst_in  = "restartopa"   !  Suffix of ocean restart name (input)
+   cn_ocerst_indir = "."       !  directory from which to read input ocean restarts
+   cn_ocerst_out = "restart"      !  Suffix of ocean restart name (output)
+   cn_ocerst_outdir = "."      !  directory in which to write output ocean restarts
+   nn_istate   =       0   !  Output the initial state (1) or not (0)
+   nn_stock    =  _AUTOBLOCKER_   !  Frequency of creation of a restart file (modulo referenced to 1)
+   nn_write    =    5475   !  Requency of write in the output file   (modulo referenced to nn_it000)
+   ln_mskland  = .true.    !  Masks land points in NetCDF outputs
+   ln_mskutil  = .true.    !  Outputs without halos
+   ln_cfmeta   = .true.    !  output additional data to netCDF files required for compliance with the CF metadata standard
+/
+!-----------------------------------------------------------------------
+&namcfg        !   parameters of the configuration
+!-----------------------------------------------------------------------
+   cp_cfg      =  "orca"               !  name of the configuration
+   jp_cfg      =       1               !  resolution of the configuration
+   jpidta      =     362               !  1st lateral dimension ( >= jpi )
+   jpjdta      =     332               !  2nd    "         "    ( >= jpj )
+   jpkdta      =      75               !  number of levels      ( >= jpk )
+   jpiglo      =     362               !  1st dimension of global domain --> i =jpidta
+   jpjglo      =     332               !  2nd    -                  -    --> j  =jpjdta
+   jperio      =       6               !  lateral cond. type (between 0 and 6)
+/
+!-----------------------------------------------------------------------
+&namzgr        !   vertical coordinate
+!-----------------------------------------------------------------------
+/
+!-----------------------------------------------------------------------
+&namzgr_sco    !   s-coordinate or hybrid z-s-coordinate
+!-----------------------------------------------------------------------
+/
+!-----------------------------------------------------------------------
+&namdom        !   space and time domain (bathymetry, mesh, timestep)
+!-----------------------------------------------------------------------
+   nn_closea    =   1      !  remove (=0) or keep (=1) closed seas and lakes (ORCA)
+   ln_clodyn    =  _AUTOBLOCKER_      !  
+   !
+   jphgr_msh   =       0               !  type of horizontal mesh
+   ppglam0     =  999999.0             !  longitude of first raw and column T-point (jphgr_msh = 1)
+   ppgphi0     =  999999.0             ! latitude  of first raw and column T-point (jphgr_msh = 1)
+   ppe1_deg    =  999999.0             !  zonal      grid-spacing (degrees)
+   ppe2_deg    =  999999.0             !  meridional grid-spacing (degrees)
+   ppe1_m      =  999999.0             !  zonal      grid-spacing (degrees)
+   ppe2_m      =  999999.0             !  meridional grid-spacing (degrees)
+   ppsur       =   -3958.951371276829  !  ORCA r4, r2 and r05 coefficients
+   ppa0        =     103.9530096000000 ! (default coefficients)
+   ppa1        =       2.415951269000000   !
+   ppkth       =      15.35101370000000    !
+   ppacr       =       7.0             !
+   ppdzmin     =  999999.0             !  Minimum vertical spacing
+   pphmax      =  999999.0             !  Maximum depth
+   ppa2        =     100.7609285000000 !  Double tanh function parameters
+   ppkth2      =      48.02989372000000    !
+   ppacr2      =      13.00000000000   !
+   rn_rdt      = 2700.     !  time step for the dynamics (and tracer if nn_acc=0)
+   rn_hmin     =   20.
+   nn_msh      = _AUTO_    !  AUTO - Create (=1) a mesh file or not (=0)
+/
+!-----------------------------------------------------------------------
+&namsplit       
+!----------------------------------------------------------------------- 
+   ln_bt_fw      =    .FALSE.          !  leap-frog integration of barotropic equations
+   ln_bt_av      =    .TRUE.           !  Time filtering of barotropic variables
+   ln_bt_nn_auto =    .TRUE.           !  Set nn_baro automatically to be just below
+                                       !  a user defined maximum courant number (rn_bt_cmax)
+   nn_baro       =    30               !  Number of iterations of barotropic mode
+                                       !  during rn_rdt seconds. Only used if ln_bt_nn_auto=F
+   rn_bt_cmax    =    0.8              !  Maximum courant number allowed if ln_bt_nn_auto=T 
+   nn_bt_flt     =    1                !  Time filter choice
+                                       !  = 0 None
+                                       !  = 1 Boxcar over   nn_baro barotropic steps
+                                       !  = 2 Boxcar over 2*nn_baro     "        
+/
+!-----------------------------------------------------------------------
+&namcrs        !   Grid coarsening for dynamics output and/or
+               !   passive tracer coarsened online simulations
+!-----------------------------------------------------------------------
+/
+!-----------------------------------------------------------------------
+&namtsd    !   data : Temperature  & Salinity
+!-----------------------------------------------------------------------
+   ln_tsd_tradmp = .false.  !  damping of ocean T & S toward T &S input data (T) or not (F)
+   sn_tem  = 'conservative_temperature_WOA13_decav_Reg1L75_clim', -1 ,'votemper' , .true. , .true. , 'yearly' , 'weights_3D_WOA13d1_2_eorca1_bilinear.nc'  ,   ''    ,    ''
+   sn_sal  = 'absolute_salinity_WOA13_decav_Reg1L75_clim'       , -1 ,'vosaline' , .true. , .true. , 'yearly' , 'weights_3D_WOA13d1_2_eorca1_bilinear.nc'  ,   ''    ,    ''
+/
+!-----------------------------------------------------------------------
+&namsbc        !   Surface Boundary Condition (surface module)
+!-----------------------------------------------------------------------
+   nn_fsbc     =  2        !  frequency of surface boundary condition computation
+                           !     (also = the frequency of sea-ice model call)
+   ln_blk_core = .false.   !  CORE bulk formulation                     (T => fill namsbc_core)
+   ln_cpl      = .true.    !  atmosphere coupled   formulation          ( requires key_oasis3 )
+   nn_limflx =   2         !  LIM3 Multi-category heat flux formulation (use -1 if LIM3 is not used)
+                           !  =-1  Use per-category fluxes, bypass redistributor, forced mode only, not yet implemented coupled
+                           !  = 0  Average per-category fluxes (forced and coupled mode)
+                           !  = 1  Average and redistribute per-category fluxes, forced mode only, not yet implemented coupled
+                           !  = 2  Redistribute a single flux over categories (coupled mode only)
+   nn_ice_embd = 1         !  AUTO - 
+                           !  =0 levitating ice (no mass exchange, concentration/dilution effect)
+                           !  =1 levitating ice with mass and salt exchange but no presure effect
+                           !  =2 embedded sea-ice (full salt and mass exchanges and pressure)
+   ln_rnf      = .false.   !  runoffs                                   (T => fill namsbc_rnf)
+   ln_ssr      = .false.   !  Sea Surface Restoring on T and/or S       (T => fill namsbc_ssr)
+   nn_fwb      = 0         !  FreshWater Budget: =0 unchecked
+   nn_isf      = 3         !  ice shelf melting/freezing                (/=0 => fill namsbc_isf)
+                           !  3 = rnf file for isf
+!-----------------------------------------------------------------------
+&namsbc_core   !   namsbc_core  CORE bulk formulae
+!-----------------------------------------------------------------------
+/
+!-----------------------------------------------------------------------
+&namtra_qsr    !   penetrative solar radiation
+!-----------------------------------------------------------------------
+   sn_chl      ='merged_ESACCI_BIOMER4V1R1_CHL_REG05',  -1  , 'CHLA' , .true. , .true. , 'yearly' , 'weights_reg05_2_eorca1_bilinear.nc' , '' , ''
+   ln_traqsr   = .true.    !  Light penetration (T) or not (F)
+   ln_qsr_rgb  = .false.    !  RGB (Red-Green-Blue) light penetration
+   ln_qsr_2bd  = .false.   !  2 bands              light penetration
+   ln_qsr_bio  = .true.   !  bio-model light penetration
+/
+!-----------------------------------------------------------------------
+&namsbc_rnf    !   runoffs namelist surface boundary condition
+!-----------------------------------------------------------------------
+!              !  file name           ! frequency (hours) ! variable  ! time interp. !  clim  ! 'yearly'/ ! weights  ! rotation ! land/sea mask !
+!              !                      !  (if <0  months)  !   name    !   (logical)  !  (T/F) ! 'monthly' ! filename ! pairing  ! filename      !
+   sn_rnf      = 'runoff-icb_DaiTrenberth_Depoorter_eORCA1_JD.nc',        -1         , 'sorunoff',   .true.     , .true. , 'yearly'  , ''       , ''       , ''
+   sn_i_rnf    = 'runoff-icb_DaiTrenberth_Depoorter_eORCA1_JD.nc',        -1         , 'Icb_flux',   .true.     , .true. , 'yearly'  , ''       , ''       , ''
+   sn_cnf      = 'runoff-icb_DaiTrenberth_Depoorter_eORCA1_JD.nc',         0         , 'socoeff' ,   .false.    , .true. , 'yearly'  , ''       , ''       , ''
+   sn_s_rnf    = 'runoffs'                         ,        24         , 'rosaline',   .true.     , .true. , 'yearly'  , ''       , ''       , ''
+   sn_t_rnf    = 'runoffs'                         ,        24         , 'rotemper',   .true.     , .true. , 'yearly'  , ''       , ''       , ''
+   sn_dep_rnf  = 'runoffs_eORCA1.0_depths.nc'      ,         0         , 'rodepth' ,   .false.    , .true. , 'yearly'  , ''       , ''       , ''
+
+   ln_rnf_icb   = .false.    !  read in iceberg flux
+   ln_rnf_mouth = .false.    !  specific treatment at rivers mouths
+   ln_rnf_depth = .true.     !  read in depth information for runoff
+   ln_rnf_tem   = .false.    !  read in temperature information for runoff
+   ln_rnf_sal   = .false.    !  read in salinity information for runoff
+   ln_rnf_depth_ini = .false.!  compute depth at initialisation from runoff file
+   rn_rnf_max   = 0.05       !  max value of the runoff climatology over global domain ( if ln_rnf_depth_ini = .true )
+   rn_dep_max = 150.         !  depth over which runoffs is spread ( ln_rnf_depth_ini = .true )
+   nn_rnf_depth_file =  _AUTO_   ! create (=1) a runoff depth file or not (=0)
+/
+!-----------------------------------------------------------------------
+&namsbc_isf    !  Top boundary layer (ISF)
+!-----------------------------------------------------------------------
+!              ! file name ! frequency (hours) ! variable ! time interpol. !  clim   ! 'yearly'/ ! weights  ! rotation !
+!              !           !  (if <0  months)  !   name   !    (logical)   !  (T/F)  ! 'monthly' ! filename ! pairing  !
+!              !
+   sn_rnfisf     = 'runoff-icb_DaiTrenberth_Depoorter_eORCA1_JD.nc' ,   -12      ,'sornfisf',    .false.      , .true.  , 'yearly'  ,  ''      ,   ''
+   sn_depmax_isf = 'runoff-icb_DaiTrenberth_Depoorter_eORCA1_JD.nc' ,   -12      ,'sodepmax_isf' ,   .false.  , .true.  , 'yearly'  ,  ''      ,   ''
+   sn_depmin_isf = 'runoff-icb_DaiTrenberth_Depoorter_eORCA1_JD.nc' ,   -12      ,'sodepmin_isf' ,   .false.  , .true.  , 'yearly'  ,  ''      ,   ''
+/
+!-----------------------------------------------------------------------
+&namsbc_apr    !   Atmospheric pressure used as ocean forcing or in bulk
+!-----------------------------------------------------------------------
+/
+!-----------------------------------------------------------------------
+&namsbc_ssr    !   surface boundary condition : sea surface restoring
+!-----------------------------------------------------------------------
+!              !   file name  ! frequency (hours) ! variable   ! time interpol. !  clim   ! 'yearly'/ ! weights  ! rotation !
+!              !              !  (if <0  months)  !   name     !    (logical)   !  (T/F)  ! 'monthly' ! filename ! pairing  !
+   sn_sss      = 'sss_absolute_salinity_WOA13_decav_Reg1L75_clim', -1. , 'sosaline', .true. , .true. , 'yearly' , 'weights_WOA13d1_2_eorca1_bilinear.nc' , ''
+/
+!-----------------------------------------------------------------------
+&namsbc_alb    !   albedo parameters
+!-----------------------------------------------------------------------
+   nn_ice_alb   =    1   !  parameterization of ice/snow albedo
+                         !     0: Shine & Henderson-Sellers (JGR 1985), giving clear-sky albedo
+                         !     1: "home made" based on Brandt et al. (JClim 2005) and Grenfell & Perovich (JGR 2004),
+                         !        giving cloud-sky albedo
+   rn_alb_sdry  =  0.87  !  dry snow albedo         : 0.80 (nn_ice_alb = 0); 0.85 (nn_ice_alb = 1); obs 0.85-0.87 (cloud-sky)
+   rn_alb_smlt  =  0.82  !  melting snow albedo     : 0.65 ( '' )          ; 0.75 ( '' )          ; obs 0.72-0.82 ( '' )
+   rn_alb_idry  =  0.65  !  dry ice albedo          : 0.72 ( '' )          ; 0.60 ( '' )          ; obs 0.54-0.65 ( '' )
+   rn_alb_imlt  =  0.58  !  bare puddled ice albedo : 0.53 ( '' )          ; 0.50 ( '' )          ; obs 0.49-0.58 ( '' )
+/
+!-----------------------------------------------------------------------
+&namsbc_cpl    !   coupling parameters
+!-----------------------------------------------------------------------
+!                    !     description       !  multiple  !    vector   !      vector          ! vector !
+!                    !                       ! categories !  reference  !    orientation       ! grids  !
+! send
+sn_snd_temp   =       'weighted oce and ice' ,    'no'    ,     ''      ,         ''           ,   ''
+sn_snd_alb    =       'weighted ice'         ,    'no'    ,     ''      ,         ''           ,   ''
+sn_snd_thick  =       'none'                 ,    'no'    ,     ''      ,         ''           ,   ''
+sn_snd_crt    =       'mixed oce-ice'        ,    'no'    , 'cartesian' , 'eastward-northward' ,  'T'
+sn_snd_co2    =       'coupled'              ,    'no'    ,     ''      ,         ''           ,   ''
+sn_snd_dms    =       'coupled'              ,    'no'    ,     ''      ,         ''           ,   ''
+! receive
+sn_rcv_w10m   =       'coupled'              ,    'no'    ,     ''      ,         ''          ,   ''
+sn_rcv_taumod =       'none'                 ,    'no'    ,     ''      ,         ''          ,   ''
+sn_rcv_tau    =       'mixed oce-ice'        ,    'no'    , 'cartesian' , 'eastward-northward',  'U,V'
+sn_rcv_dqnsdt =       'coupled'              ,    'no'    ,     ''      ,         ''          ,   ''
+sn_rcv_qsr    =       'conservative'         ,    'no'    ,     ''      ,         ''          ,   ''
+sn_rcv_qns    =       'conservative'         ,    'no'    ,     ''      ,         ''          ,   ''
+sn_rcv_emp    =       'conservative'         ,    'no'    ,     ''      ,         ''          ,   ''
+sn_rcv_rnf    =       'coupled'              ,    'no'    ,     ''      ,         ''          ,   ''
+sn_rcv_cal    =       'coupled'              ,    'no'    ,     ''      ,         ''          ,   ''
+sn_rcv_co2    =       'coupled'              ,    'no'    ,     ''      ,         ''          ,   ''
+sn_rcv_icb    =       'coupled'              ,    'no'    ,     ''      ,         ''          ,   ''
+sn_rcv_isf    =       'coupled'              ,    'no'    ,     ''      ,         ''          ,   ''
+
+/
+!-----------------------------------------------------------------------
+&namberg       !   iceberg parameters
+!-----------------------------------------------------------------------
+      ln_icebergs              = .false.
+      ln_bergdia               = .false.              ! Calculate budgets
+      nn_verbose_level         = 0                    ! Turn on more verbose output if level > 0
+      nn_verbose_write         = 120                  ! Timesteps between verbose messages
+      nn_sample_rate           = 1                    ! Timesteps between sampling for trajectory storage
+                                                      ! Initial mass required for an iceberg of each class
+      rn_initial_mass          = 8.8e7, 4.1e8, 3.3e9, 1.8e10, 3.8e10, 7.5e10, 1.2e11, 2.2e11, 3.9e11, 7.4e11
+                                                      ! Proportion of calving mass to apportion to each class  
+      rn_distribution          = 0.24, 0.12, 0.15, 0.18, 0.12, 0.07, 0.03, 0.03, 0.03, 0.02
+                                                      ! Ratio between effective and real iceberg mass (non-dim)
+                                                      ! i.e. number of icebergs represented at a point         
+      rn_mass_scaling          = 2000, 200, 50, 20, 10, 5, 2, 1, 1, 1
+                                                      ! thickness of newly calved bergs (m)
+      rn_initial_thickness     = 40., 67., 133., 175., 250., 250., 250., 250., 250., 250.
+      rn_rho_bergs             = 850.                 ! Density of icebergs
+      rn_LoW_ratio             = 1.5                  ! Initial ratio L/W for newly calved icebergs
+      ln_operator_splitting    = .true.               ! Use first order operator splitting for thermodynamics
+      rn_bits_erosion_fraction = 0.                   ! Fraction of erosion melt flux to divert to bergy bits
+      rn_sicn_shift            = 0.                   ! Shift of sea-ice concn in erosion flux (0<sicn_shift<1)
+      ln_passive_mode          = .false.              ! iceberg - ocean decoupling   
+      nn_test_icebergs         =   8                  ! Create test icebergs of this class (-1 = no)
+                                                      ! Put a test iceberg at each gridpoint in box (lon1,lon2,lat1,lat2)
+      !rn_test_box              = 108.0,  116.0, -66.0, -58.0
+      rn_test_box              = -180.0,  180.0,  70.0,  90.0     !
+      rn_speed_limit           = 0.                   ! CFL speed limit for a berg   
+
+!              ! file name ! frequency (hours) !   variable   ! time interp.   !  clim   ! 'yearly'/ ! weights  ! rotation ! land/sea mask !
+!              !           !  (if <0  months)  !     name     !   (logical)    !  (T/F ) ! 'monthly' ! filename ! pairing  ! filename      !
+      sn_icb =  'calving' ,       -1           , 'calvingmask',  .true.        , .true.  , 'yearly'  , ''       , ''       , ''
+   
+      cn_dir = './' 
+/
+!-----------------------------------------------------------------------
+&namlbc        !   lateral momentum boundary condition
+!-----------------------------------------------------------------------
+   rn_shlat    =    0.0    !  shlat = 0  !  0 < shlat < 2  !  shlat = 2  !  2 < shlat
+/
+!-----------------------------------------------------------------------
+&namcla        !   cross land advection
+!-----------------------------------------------------------------------
+/
+!-----------------------------------------------------------------------
+&nambfr        !   bottom friction
+!-----------------------------------------------------------------------
+   nn_bfr      =    2      !  type of bottom friction :   = 0 : free slip,  = 1 : linear friction
+/
+!-----------------------------------------------------------------------
+&nambbc        !   bottom temperature boundary condition
+!-----------------------------------------------------------------------
+   sn_qgh      ='Goutorbe_ghflux.nc',  -12.  , 'gh_flux'    ,   .false.     , .true. , 'yearly'  , 'weights_Goutorbe1_2_eorca1_bilinear.nc'       , ''       , ''
+   !
+   cn_dir      = './'      !  root directory for the location of the runoff files
+   nn_geoflx   =    2      !  geothermal heat flux: = 0 no flux
+/
+!-----------------------------------------------------------------------
+&nambbl        !   bottom boundary layer scheme
+!-----------------------------------------------------------------------
+/
+!-----------------------------------------------------------------------
+&nameos        !   ocean physical parameters
+!-----------------------------------------------------------------------
+/
+!-----------------------------------------------------------------------
+&namtra_adv    !   advection scheme for tracer
+!-----------------------------------------------------------------------
+   ln_traadv_tvd    =  .true.   !  TVD scheme
+   ln_traadv_ubs    =  .false.  !  UBS scheme
+/
+!-----------------------------------------------------------------------
+&namtra_adv_mle !  mixed layer eddy parametrisation (Fox-Kemper param)
+!-----------------------------------------------------------------------
+/
+!----------------------------------------------------------------------------------
+&namtra_ldf    !   lateral diffusion scheme for tracers
+!----------------------------------------------------------------------------------
+   ln_traldf_grif   =  .false.   !  griffies skew flux formulation       (require "key_ldfslp")
+   ln_traldf_gdia   =  .false.   !  griffies operator strfn diagnostics  (require "key_ldfslp")
+   ln_botmix_grif   =  .false.   !  griffies operator with lateral mixing on bottom (require "key_ldfslp")
+   rn_aht_0         =  1000.    !  horizontal eddy diffusivity for tracers [m2/s]
+   rn_aeiv_0        =  1000.    !  eddy induced velocity coefficient [m2/s]    (require "key_traldf_eiv")
+/
+!-----------------------------------------------------------------------
+&namtra_dmp    !   tracer: T & S newtonian damping
+!-----------------------------------------------------------------------
+   ln_tradmp   =  .false.  !  add a damping termn (T) or not (F)
+/
+!-----------------------------------------------------------------------
+&namdyn_adv    !   formulation of the momentum advection
+!-----------------------------------------------------------------------
+   ln_dynadv_vec = .true.  !  vector form (T) or flux form (F)
+   ln_dynadv_cen2= .false. !  flux form - 2nd order centered scheme
+   ln_dynadv_ubs = .false. !  flux form - 3rd order UBS      scheme
+   nn_dynkeg     = 1       !  scheme for grad(KE): =0  C2  ; =1  Hollingsworth correction
+/
+!-----------------------------------------------------------------------
+&nam_vvl    !   vertical coordinate options
+!-----------------------------------------------------------------------
+/
+!-----------------------------------------------------------------------
+&namdyn_vor    !   option of physics/algorithm (not control by CPP keys)
+!-----------------------------------------------------------------------
+/
+!-----------------------------------------------------------------------
+&namdyn_hpg    !   Hydrostatic pressure gradient option
+!-----------------------------------------------------------------------
+   ln_hpg_zps  = .false.   !  z-coordinate - partial steps (interpolation)
+   ln_hpg_sco  = .true.    !  s-coordinate (standard jacobian formulation)
+   !ln_hpg_isf  = .true.    !  s-coordinate (sco ) adapted to isf
+   ln_dynhpg_imp = .false. !  time stepping: semi-implicit time scheme  (T)
+                           !           centered      time scheme  (F)
+/
+!-----------------------------------------------------------------------
+&namdyn_ldf    !   lateral diffusion on momentum
+!-----------------------------------------------------------------------
+   rn_ahm_0_lap     = 20000.    !  horizontal laplacian eddy viscosity   [m2/s]
+/
+!-----------------------------------------------------------------------
+&namzdf        !   vertical physics
+!-----------------------------------------------------------------------
+/
+!-----------------------------------------------------------------------
+&namzdf_tke    !   turbulent eddy kinetic dependent vertical diffusion  ("key_zdftke")
+!-----------------------------------------------------------------------
+  nn_etau     = 0         !  penetration of tke below the mixed layer (ML) due to internal & intertial waves
+                          !    = 0 no penetration
+                          !    = 1 add a tke source below the ML
+                          !    = 2 add a tke source just at the base of the ML
+                          !    = 3 as = 1 applied on HF part of the stress    ("key_oasis3")
+  nn_mxl0     = 2         ! type of scaling under sea-ice
+                          !    = 0 no scaling under sea-ice
+                          !    = 1 scaling with constant sea-ice thickness
+                          !    = 2  scaling with mean sea-ice thickness
+                          !    = 3  scaling with maximum sea-ice thickness
+  rn_hice    = 10.        ! max constant ice thickness value when scaling under sea-ice ( nn_mxl0=1)
+  ln_lc      = .true.     !  Langmuir cell parameterisation (Axell 2002)
+  rn_lc      =  0.20      !  coef. associated to Langmuir cells
+/
+!-----------------------------------------------------------------------
+&namzdf_ddm    !   double diffusive mixing parameterization             ("key_zdfddm")
+!-----------------------------------------------------------------------
+/
+!-----------------------------------------------------------------------
+&namzdf_tmx    !   tidal mixing parameterization                        ("key_zdftmx")
+!-----------------------------------------------------------------------
+/
+!-----------------------------------------------------------------------
+&namzdf_tmx_new    !   new tidal mixing parameterization                ("key_zdftmx_new")
+!-----------------------------------------------------------------------
+   nn_zpyc     = 2         !  pycnocline-intensified dissipation scales as N (=1) or N^2 (=2)
+   ln_mevar    = .true.    !  variable (T) or constant (F) mixing efficiency
+   ln_tsdiff   = .true.    !  account for differential T/S mixing (T) or not (F)
+/
+!-----------------------------------------------------------------------
+&namsol        !   elliptic solver / island / free surface
+!-----------------------------------------------------------------------
+/
+!-----------------------------------------------------------------------
+&nammpp        !   Massively Parallel Processing                        ("key_mpp_mpi)
+!-----------------------------------------------------------------------
+   ln_nnogather=  .true.   !
+   jpni        =   22      !  jpni   number of processors following i (set automatically if < 1)
+   jpnj        =   22      !  jpnj   number of processors following j (set automatically if < 1)
+   jpnij       =  360      !  jpnij  number of local domains (set automatically if < 1), 360 for eORCA1/IPSLCM6-LR
+/
+!-----------------------------------------------------------------------
+&namctl        !   Control prints & Benchmark
+!----------------------------------------------------------------------- 
+/
+!-----------------------------------------------------------------------
+&namptr       !   Poleward Transport Diagnostic
+!-----------------------------------------------------------------------
+   ln_diaptr  = .true.      !  Poleward heat and salt transport (T) or not (F)
+   ln_subbas  = .true.      !  Atlantic/Pacific/Indian basins computation (T) or not
+                            !  (orca configuration only, need input basins mask file named "subbasins.nc"
+/
+!-----------------------------------------------------------------------
+&namhsb       !  Heat and salt budgets
+!-----------------------------------------------------------------------
+   ln_diahsb  = .true.  
+/
+!-----------------------------------------------------------------------
+&namdyn_nept  !   Neptune effect (simplified: lateral and vertical diffusions removed)
+!-----------------------------------------------------------------------
+/
+!-----------------------------------------------------------------------
+&nam_vvl    !   vertical coordinate options
+!-----------------------------------------------------------------------
+/
+!-----------------------------------------------------------------------
+&namzdf_gls                !   GLS vertical diffusion                   ("key_zdfgls")
+!-----------------------------------------------------------------------
+/
+!-----------------------------------------------------------------------
+&namtrd        !   diagnostics on dynamics and/or tracer trends
+!              !       and/or mixed-layer trends and/or barotropic vorticity
+!-----------------------------------------------------------------------
+   ln_tra_trd  = .true.   ! (T) 3D tracer trend output
+/
+!-----------------------------------------------------------------------
+&namsto       ! Stochastic parametrization of EOS
+!-----------------------------------------------------------------------
+/
Index: /CONFIG/UNIFORM/v6/IPSLCM6.3/GENERAL/PARAM/namelist_lim3_cfg_NPv6.2
===================================================================
--- /CONFIG/UNIFORM/v6/IPSLCM6.3/GENERAL/PARAM/namelist_lim3_cfg_NPv6.2	(revision 6531)
+++ /CONFIG/UNIFORM/v6/IPSLCM6.3/GENERAL/PARAM/namelist_lim3_cfg_NPv6.2	(revision 6531)
@@ -0,0 +1,1 @@
+link namelist_lim3_cfg_NPv6.1
Index: /CONFIG/UNIFORM/v6/IPSLCM6.3/GENERAL/PARAM/namelist_lim3_cfg_NPv6.2_MR025
===================================================================
--- /CONFIG/UNIFORM/v6/IPSLCM6.3/GENERAL/PARAM/namelist_lim3_cfg_NPv6.2_MR025	(revision 6531)
+++ /CONFIG/UNIFORM/v6/IPSLCM6.3/GENERAL/PARAM/namelist_lim3_cfg_NPv6.2_MR025	(revision 6531)
@@ -0,0 +1,1 @@
+link namelist_lim3_cfg_NPv6.1
Index: /CONFIG/UNIFORM/v6/IPSLCM6.3/GENERAL/PARAM/namelist_lim3_cfg_NPv6.2_MR1
===================================================================
--- /CONFIG/UNIFORM/v6/IPSLCM6.3/GENERAL/PARAM/namelist_lim3_cfg_NPv6.2_MR1	(revision 6531)
+++ /CONFIG/UNIFORM/v6/IPSLCM6.3/GENERAL/PARAM/namelist_lim3_cfg_NPv6.2_MR1	(revision 6531)
@@ -0,0 +1,1 @@
+link namelist_lim3_cfg_NPv6.1
Index: /CONFIG/UNIFORM/v6/IPSLCM6.3/GENERAL/PARAM/namelist_pisces_ESMCO2AER_ORCA1_cfg
===================================================================
--- /CONFIG/UNIFORM/v6/IPSLCM6.3/GENERAL/PARAM/namelist_pisces_ESMCO2AER_ORCA1_cfg	(revision 6531)
+++ /CONFIG/UNIFORM/v6/IPSLCM6.3/GENERAL/PARAM/namelist_pisces_ESMCO2AER_ORCA1_cfg	(revision 6531)
@@ -0,0 +1,114 @@
+!!>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
+!! PISCES  :   Configuration namelist : used to overwrite defaults values defined in SHARED/namelist_pis_ref
+!>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
+!'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+&nampisext     !   air-sea exchange
+!,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+   atcco2     =  _AUTO_: DEFAULT=287.    ! Constant value atmospheric pCO2 - ln_co2int = F
+   atcn2o     =  _AUTO_: DEFAULT=280.    ! Constant value atmospheric pN2O (ppb)
+/
+!'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+&nampisatm     !  Atmospheric pressure 
+!,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+  ln_presatm  = .false.   ! constant atmopsheric pressure (F) or from a file (T)
+/
+!'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+&nampisbio     !   biological parameters
+!,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+   alphan2o   = 1.5e-4     ! Nitrification coefficient for n2o
+   betan2o    = 120.e-4    ! Denitrification coefficient for n2o
+   xlow       = 1.0        ! Lower boundary of suboxia for N2O production
+   xhigh      = 5.0        ! Upper boundary of suboxia for N2O production
+   sinkn2o    = 0.187      ! N2O sink term coefficient
+/
+!'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+&nampislim     !   parameters for nutrient limitations
+!,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+   xkdms     = 1.25E-9     !  DMS half saturation for bacterial loss = 1.25E-9
+   xscdiat   = 0.0018     ! S/C ratio for diatoms = 0.0018
+   xscnanom  = 0.015      ! min S/C ratio for nano = 0.015
+   xscnanov  = 0.015      ! var S/C ratio for nano = 0.015
+   xysvar    = 0.5        ! DMSP-to-DMS yield var = 0.2
+   xysmin    = 0.1        ! DMSP-to-DMS yield min = 0.4
+   xknfer    = 1.e-11       ! DMS FER  half saturation for nano = 2.e-11
+   xkdfer    = 0.5e-10       ! DMS FER  half saturation for diatoms = 1.e-10
+   xkdocdms  = 5.e-6       ! DMS DOC  half saturation = 5.e-6
+   xknpo4    = 2.e-7        ! DMS PO4  half saturation for nano = 1.e-7
+   xkdpo4    = 10.e-7        ! DMS PO4  half saturation for diatoms = 5.e-7
+/
+!'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+&nampisopt     !   parameters for optics
+!,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+!              !  file name                                 ! frequency (hours) ! variable  ! time interp. !  clim  ! 'yearly'/ ! weights  ! rotation ! land/sea mask !
+!              !                                            !  (if <0  months)  !   name    !   (logical)  !  (T/F) ! 'monthly' ! filename ! pairing  ! filename      !
+   sn_par      = 'par_fraction_gewex_clim90s00s_eORCA_R1.nc',     24            , 'fr_par'  ,  .true.      , .true. , 'yearly'  , ''       , ''       , ''
+   ln_varpar   =  .true.   ! boolean for PAR variable
+/ 
+!'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+&nampisprod     !   parameters for phytoplankton growth
+!,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+/
+!'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+&nampismort     !   parameters for phytoplankton sinks
+!,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+/
+!'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+&nampismes     !   parameters for mesozooplankton
+!,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+/
+!'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+&nampiszoo     !   parameters for microzooplankton
+!,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+/
+!'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+&nampisfer     !   parameters for iron chemistry
+!,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+/  
+!'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+&nampisrem     !   parameters for remineralization
+!,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+   xlightdms  =  0.05       !: photodegradation rate constant of DMS
+   xsinkdms   =  0.4        !: microbial degradation rate of DMS
+   xvsinkdms  =  1.       !: microbial degradation rate of DMS VOGT
+/
+!'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+&nampiscal     !   parameters for Calcite chemistry
+!,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+/
+!'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+&nampissbc     !   parameters for inputs deposition
+!,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+!              !  file name                           ! frequency (hours) ! variable      ! time interp. !  clim  ! 'yearly'/ ! weights        ! rotation ! land/sea mask !
+!              !                                      !  (if <0  months)  !   name        !   (logical)  !  (T/F) ! 'monthly' ! filename       ! pairing  ! filename      !
+!
+   sn_dust     = 'dust.orca.nc'                       ,    -1             , 'dust'        ,  .true.      , .true. , 'yearly'  , 'weights_lmd144142_bilin.nc', ''    , ''
+   sn_solub    = 'Solubility_T62_Mahowald_eORCA_R1.nc',    -12            , 'solubility2' ,  .false.     , .true. , 'yearly'  , ''       , ''    , ''
+   sn_riverdic = 'river_global_news_eORCA_R1.nc'      ,    -1             , 'riverdic'    ,  .true.      , .true. , 'yearly'  , ''       , ''    , ''
+   sn_riverdoc = 'river_global_news_eORCA_R1.nc'      ,    -1             , 'riverdoc'    ,  .true.      , .true. , 'yearly'  , ''       , ''    , ''
+   sn_riverdin = 'river_global_news_eORCA_R1.nc'      ,    -1             , 'riverdin'    ,  .true.      , .true. , 'yearly'  , ''       , ''    , ''
+   sn_riverdon = 'river_global_news_eORCA_R1.nc'      ,    -1             , 'riverdon'    ,  .true.      , .true. , 'yearly'  , ''       , ''    , ''
+   sn_riverdip = 'river_global_news_eORCA_R1.nc'      ,    -1             , 'riverdip'    ,  .true.      , .true. , 'yearly'  , ''       , ''    , ''
+   sn_riverdop = 'river_global_news_eORCA_R1.nc'      ,    -1             , 'riverdop'    ,  .true.      , .true. , 'yearly'  , ''       , ''    , ''
+   sn_riverdsi = 'river_global_news_eORCA_R1.nc'      ,    -1             , 'riverdsi'    ,  .true.      , .true. , 'yearly'  , ''       , ''    , ''
+   sn_ndepo    = 'ndeposition.orca.nc'                ,    -1             , 'ndep'        ,  .true.      , .true. , 'yearly'  , 'weights_2d_bilin.nc', ''    , ''
+   sn_ironsed  = 'pmarge_etopo_eORCA_R1.nc'           ,    -12            , 'bathy'       ,  .false.     , .true. , 'yearly'  , ''       , ''    , ''
+   cn_dir      = './'      !  root directory for the location of the dynamical files
+   ln_dust     =  .true.   ! boolean for dust input from the atmosphere
+   ln_solub    =  .true.   ! boolean for variable solubility of atm. Iron
+   ln_river    =  .true.   ! boolean for river input of nutrients
+   ln_ndepo    =  .true.   ! boolean for atmospheric deposition of N
+   ln_ironsed  =  .true.   ! boolean for Fe input from sediments
+   ln_ironice  =  .true.   ! boolean for Fe input from sea ice
+   sedfeinput  =  1.e-9    ! Coastal release of Iron
+   nitrfix     =  1.4e-7   ! Nitrogen fixation rate
+/
+!'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+&nampisdmp     !  Damping 
+!,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+   ln_pisdmp   = .true.                      ! No relaxation for PISCES passive tracers
+   nn_pisdmp   =  _AUTO_: DEFAULT=8760       !  Frequency of Relaxation
+/
+!'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+&nampismass     !  Mass conservation
+!,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+/
Index: /CONFIG/UNIFORM/v6/IPSLCM6.3/GENERAL/PARAM/namelist_top_ESMCO2AER_ORCA1piC_cfg
===================================================================
--- /CONFIG/UNIFORM/v6/IPSLCM6.3/GENERAL/PARAM/namelist_top_ESMCO2AER_ORCA1piC_cfg	(revision 6531)
+++ /CONFIG/UNIFORM/v6/IPSLCM6.3/GENERAL/PARAM/namelist_top_ESMCO2AER_ORCA1piC_cfg	(revision 6531)
@@ -0,0 +1,117 @@
+!!>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
+!! NEMO/TOP1 :  Configuration namelist : used to overwrite defaults values defined in SHARED/namelist_top_ref
+!>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
+!-----------------------------------------------------------------------
+&namtrc_run     !   run information
+!-----------------------------------------------------------------------
+   ln_top_euler  = .true.    !  use Euler time-stepping for TOP
+   ln_rsttr      = _AUTOBLOCKER_   !  AUTO - start from a restart file (T) or not (F)
+   nn_rsttr      = _AUTOBLOCKER_   !  AUTO - restart control = 0 initial time step is not compared to the restart file value
+                             !                  = 1 do not use the value in the restart file
+                             !                  = 2 calendar parameters read in the restart file
+   cn_trcrst_in  = "restart_trc"   !  suffix of pass. sn_tracer restart name (input)
+   cn_trcrst_out = "restart_trc"   !  suffix of pass. sn_tracer restart name (output)
+/
+!-----------------------------------------------------------------------
+&namtrc     !   tracers definition
+!-----------------------------------------------------------------------
+   ln_trcdta     =  .true.  !  Initialisation from data input file (T) or not (F)
+   ln_trcdmp_clo =  .true.  !  restoring on closed seas (T) or not (F) 
+
+
+!                !    name   !           title of the field              ! initial data ! initial data ! save   !
+!                !           !                                           !  units       ! from file    ! or not ! 
+!                !           !                                           !              ! or not       !        !
+   sn_tracer(1)   = 'DIC     ' , 'Dissolved inorganic Concentration      ',  'mol-C/L' ,  .true.     ,  .true.
+   sn_tracer(2)   = 'Alkalini' , 'Total Alkalinity Concentration         ',  'eq/L '   ,  .true.     ,  .true.
+   sn_tracer(3)   = 'O2      ' , 'Dissolved Oxygen Concentration         ',  'mol-C/L' ,  .true.     ,  .true.
+   sn_tracer(4)   = 'CaCO3   ' , 'Calcite Concentration                  ',  'mol-C/L' ,  .false.    ,  .true.
+   sn_tracer(5)   = 'PO4     ' , 'Phosphate Concentration                ',  'mol-C/L' ,  .true.     ,  .true.
+   sn_tracer(6)   = 'POC     ' , 'Small organic carbon Concentration     ',  'mol-C/L' ,  .false.    ,  .true.
+   sn_tracer(7)   = 'Si      ' , 'Silicate Concentration                 ',  'mol-C/L' ,  .true.     ,  .true.
+   sn_tracer(8)   = 'PHY     ' , 'Nanophytoplankton Concentration        ',  'mol-C/L' ,  .false.    ,  .true.
+   sn_tracer(9)   = 'ZOO     ' , 'Microzooplankton Concentration         ',  'mol-C/L' ,  .false.    ,  .true.
+   sn_tracer(10)  = 'DOC     ' , 'Dissolved organic Concentration        ',  'mol-C/L' ,  .true.     ,  .true.
+   sn_tracer(11)  = 'PHY2    ' , 'Diatoms Concentration                  ',  'mol-C/L' ,  .false.    ,  .true.
+   sn_tracer(12)  = 'ZOO2    ' , 'Mesozooplankton Concentration          ',  'mol-C/L' ,  .false.    ,  .true.
+   sn_tracer(13)  = 'DSi     ' , 'Diatoms Silicate Concentration         ',  'mol-C/L' ,  .false.    ,  .true.
+   sn_tracer(14)  = 'Fer     ' , 'Dissolved Iron Concentration           ',  'mol-C/L' ,  .true.     ,  .true.
+   sn_tracer(15)  = 'BFe     ' , 'Big iron particles Concentration       ',  'mol-C/L' ,  .false.    ,  .true.
+   sn_tracer(16)  = 'GOC     ' , 'Big organic carbon Concentration       ',  'mol-C/L' ,  .false.    ,  .true.
+   sn_tracer(17)  = 'SFe     ' , 'Small iron particles Concentration     ',  'mol-C/L' ,  .false.    ,  .true.
+   sn_tracer(18)  = 'DFe     ' , 'Diatoms iron  Concentration            ',  'mol-C/L' ,  .false.    ,  .true.
+   sn_tracer(19)  = 'GSi     ' , 'Sinking biogenic Silicate Concentration',  'mol-C/L' ,  .false.    ,  .true.
+   sn_tracer(20)  = 'NFe     ' , 'Nano iron Concentration                ',  'mol-C/L' ,  .false.    ,  .true.
+   sn_tracer(21)  = 'NCHL    ' , 'Nano chlorophyl Concentration          ',  'mol-C/L' ,  .false.    ,  .true.
+   sn_tracer(22)  = 'DCHL    ' , 'Diatoms chlorophyl Concentration       ',  'mol-C/L' ,  .false.    ,  .true.
+   sn_tracer(23)  = 'NO3     ' , 'Nitrates Concentration                 ',  'mol-C/L' ,  .true.     ,  .true.
+   sn_tracer(24)  = 'NH4     ' , 'Ammonium Concentration                 ',  'mol-C/L' ,  .false.    ,  .true.
+   sn_tracer(25)  = 'N2O     ' , 'Nitrous Oxide Concentration            ',  'mol-C/L' ,  .false.    ,  .true.
+   sn_tracer(26)  = 'DMS     ' , 'Dimethylsulfide Concentration          ',  'mol-C/L' ,  .false.    ,  .true.
+/
+!-----------------------------------------------------------------------
+&namtrc_dta      !    Initialisation from data input file
+!-----------------------------------------------------------------------
+!                !                 file name               ! frequency (hours) ! variable   ! time interp. !  clim  ! 'yearly'/ ! weights  ! rotation ! land/sea mask !
+!                !                                         !  (if <0  months)  !   name     !   (logical)  !  (T/F) ! 'monthly' ! filename ! pairing  ! filename      !
+   sn_trcdta(1)  = 'DIC_GLODAPv2.1_annual_eORCA_R1.nc'     ,        -12        ,  'PiDIC'   ,    .false.   , .true. , 'yearly'  , ''       , ''   , ''
+   sn_trcdta(2)  = 'Alkalini_GLODAPv2.1_annual_eORCA_R1.nc',        -12        ,  'Alkalini',    .false.   , .true. , 'yearly'  , ''       , ''   , ''
+   sn_trcdta(3)  = 'O2_WOA2009_monthly_eORCA_R1.nc'        ,        -1         ,  'O2'      ,    .true.    , .true. , 'yearly'  , ''       , ''   , ''
+   sn_trcdta(5)  = 'PO4_WOA2009_monthly_eORCA_R1.nc'       ,        -1         ,  'PO4'     ,    .true.    , .true. , 'yearly'  , ''       , ''   , ''
+   sn_trcdta(7)  = 'Si_WOA2009_monthly_eORCA_R1.nc'        ,        -1         ,  'Si'      ,    .true.    , .true. , 'yearly'  , ''       , ''   , ''
+   sn_trcdta(10) = 'DOC_PISCES_monthly_eORCA_R1.nc'        ,        -1         ,  'DOC'     ,    .true.    , .true. , 'yearly'  , ''       , ''   , ''
+   sn_trcdta(14) = 'Fer_PISCES_monthly_eORCA_R1.nc'        ,        -1         ,  'Fer'     ,    .true.    , .true. , 'yearly'  , ''       , ''   , ''
+   sn_trcdta(23) = 'NO3_WOA2009_monthly_eORCA_R1.nc'       ,        -1         ,  'NO3'     ,    .true.    , .true. , 'yearly'  , ''       , ''   , ''
+   rn_trfac(1)   =   1.028e-06  !  multiplicative factor
+   rn_trfac(2)   =   1.028e-06  !  -      -      -     -
+   rn_trfac(3)   =  44.6e-06  !  -      -      -     -
+   rn_trfac(5)   = 122.0e-06  !  -      -      -     -
+   rn_trfac(7)   =   1.0e-06  !  -      -      -     -
+   rn_trfac(10)  =   1.0e-06  !  -      -      -     -
+   rn_trfac(14)  =   1.0e-06  !  -      -      -     -
+   rn_trfac(23)  =   7.6e-06  !  -      -      -     -
+/
+!-----------------------------------------------------------------------
+&namtrc_adv    !   advection scheme for passive tracer 
+!-----------------------------------------------------------------------
+   ln_trcadv_tvd     =  .false.  !  TVD scheme
+   ln_trcadv_muscl   =  .true.   !  MUSCL scheme
+/
+!-----------------------------------------------------------------------
+&namtrc_ldf    !   lateral diffusion scheme for passive tracer 
+!-----------------------------------------------------------------------
+   rn_fact_lap      =     15.    !     enhanced zonal eddy diffusivity
+/
+!-----------------------------------------------------------------------
+&namtrc_zdf        !   vertical physics
+!-----------------------------------------------------------------------
+/
+!-----------------------------------------------------------------------
+&namtrc_rad        !  treatment of negative concentrations 
+!-----------------------------------------------------------------------
+/
+!-----------------------------------------------------------------------
+&namtrc_dmp    !   passive tracer newtonian damping
+!-----------------------------------------------------------------------
+/
+!-----------------------------------------------------------------------
+&namtrc     !   tracers definition
+!-----------------------------------------------------------------------
+/
+!-----------------------------------------------------------------------
+&namtrc_ice       !    Representation of sea ice growth & melt effects
+!-----------------------------------------------------------------------
+/
+!-----------------------------------------------------------------------
+&namtrc_trd       !   diagnostics on tracer trends        ('key_trdtrc')
+!                          or mixed-layer trends          ('key_trdmld_trc')
+!----------------------------------------------------------------------
+/
+!-----------------------------------------------------------------------
+&namtrc_dia       !   parameters for passive tracer additional diagnostics
+!----------------------------------------------------------------------
+/
+!----------------------------------------------------------------------
+&namtrc_bc        !   data for boundary conditions
+!-----------------------------------------------------------------------
+/
Index: /CONFIG/UNIFORM/v6/IPSLCM6.3/GENERAL/PARAM/physiq.def_NPv6.2
===================================================================
--- /CONFIG/UNIFORM/v6/IPSLCM6.3/GENERAL/PARAM/physiq.def_NPv6.2	(revision 6531)
+++ /CONFIG/UNIFORM/v6/IPSLCM6.3/GENERAL/PARAM/physiq.def_NPv6.2	(revision 6531)
@@ -0,0 +1,538 @@
+#
+# $Id: physiq.def_NPv6.1 3964 2018-07-06 11:44:14Z acosce $
+#
+
+##############################################################
+# PARAMETRES ET CLES DE LA PHYSIQUE LMDZ
+##############################################################
+# D: Valeur par default
+#
+
+###########################################################
+# divers. Devrait aller dans config.def ?
+###########################################################
+##   Si=.T. ,  lecture du fichier limit avec la bonne annee 
+ok_limitvrai=n
+
+###########################################################
+# Parametres couche limite de surface
+###########################################################
+
+          #  ...
+f_cdrag_stable=1
+
+          # Facteur sur les coefficients de trainee terrestres
+f_cdrag_ter=1
+
+          # Vitesse minimum dans les calculs de trainee Cd ( || V || + Vmin )
+min_wind_speed=0.1
+
+          #  Modelisation des bosquets
+ifl_pbltree=1
+Cd_frein=0.016
+
+###########################################################
+# parameter des flux air-mer
+###########################################################
+
+          # Facteur sur les flux sensibles et latent
+          # Introduit pour reduire l evaporation quand on avait z0h=z0m
+          # CONSEILLE : 1
+f_cdrag_oce=1
+
+          # Flag controlant le calcul des z0
+iflag_z0_oce=1
+
+          # Rapport entre les Z0 latent et sensible
+f_z0qh_oce=1.55
+
+          # Activation des rafales : Oui 1 ou non 0
+iflag_gusts=2
+
+          # facteur pour les rafales des thermiques (bounary layer)
+f_gust_bl=0.845
+
+          # facteur pour les poches (wake)
+f_gust_wk=0.2
+
+          # facteur sur qsat pour tenir compte de la salinite
+f_qsat_oce=0.98
+
+          #cdmmax : valeur max de Cd moment. Sur ocean seulement
+cdmmax=0.2
+
+          #cdhmax : valeur max de Cd evap/sensible. Sur ocean seulement
+cdhmax=0.2
+
+####################################################################
+# Couche limite turbulente
+####################################################################
+
+          # Nouvelle version de Mellor et Yamada
+new_yamada4=y
+
+          # Choix du schema numerique pour new_yamada4=y
+          #  1 schema de MAR. Bien pour CL stables mais detruit les stratocu
+          #  5 schema de MAR modifie. Precaunise.
+yamada4_num=5
+
+          # Flag de controle de la couche limite stable
+iflag_corr_sta=4
+
+          # min sur les fonction de stabilite a la surface
+f_ri_cd_min=0.01
+
+          # max du Ric pour Kz. Decouplage plus grand pour Ric plus grand.
+yamada4_ric=0.18
+
+          # Longueur de melange minimum pour Kz
+lmixmin=0
+
+          #shema de la couche de surface (D:1, 1:LMD, 8:Mellor-Yamada) 
+iflag_pbl=12
+
+          # Seuils pour la diffusion turbulente
+ksta_ter=1e-07
+ksta=1e-10
+
+          #ok_kzmin : calcul Kzmin dans la CL de surface (D: y)
+ok_kzmin=n
+
+          # Creation de TKE par orographie sous-maille
+addtkeoro=2
+alphatkeoro=1
+smallscales_tkeoro=y
+
+
+####################################################################
+# Ondes de gravite / Orographie sous maille
+####################################################################
+
+          #  Orodr  ou  non   pour l orographie
+ok_orodr=y
+
+          #  Orolf  ou  non   pour l orographie              
+ok_orolf=y
+
+          #Rugoro : inclusion de l orographie sous maille dans le Cd de surface
+          # Obsolete avec l activation des ondes de gravite
+f_rugoro=0
+
+          # Parametres controlant l effet de l orographie sous maille
+sso_gfrcri=0.7
+sso_gkdrag=0.6
+sso_gkwake=0.4
+sso_gklift=0.1
+
+          # Random gravity waves
+          #Activitate the stochastic parameterization of convective GWs
+          # (should be equal to ok_strato)
+ok_gwd_rando=y
+
+          # Scale the momentum fluxes due to convective GWs
+gwd_rando_ruwmax=0.5
+
+          #Scale the saturated momentum flux of  convective GWs 
+gwd_rando_sat=0.6
+
+          # Important pour controler la periode de la QBO
+gwd_front_ruwmax=3
+
+
+###############################################################
+# Rayonnement
+###############################################################
+          # activation du nouveau code de rayonnement RRTM
+          # 0 : Ancien code et 1 : RRTM (D=0)
+iflag_rrtm=1
+
+          # Nombre de bandes pour le SW. Mettre 2 si iflag_rrtm=0
+NSW=6
+
+    # Albedo et inertie des calottes
+alb_vis_sno_lic=0.96
+alb_nir_sno_lic=0.68
+    # Controle de l'inertie des glaciers et banquises
+    # inertie_sno : pour la neige (y compris sur les points "ter"
+    #      quand orchidee n'est pas actif utilisÃ©)
+    # inertie_lic/sic : pour les "land ice" et "sea ice"
+inertie_sno=350
+    # iflag_sic=1 pour forcer Ã  garder l'inertie des "sea ice"
+    # a inertie_sic meme si la surface est couverte de neige
+iflag_sic=1
+inertie_lic=2000
+inertie_sic=2000
+    # tau_gl = constante de rappel de la temperature a la surface de la glace (en nombre de jours)
+    #     # Utilise celon le forcage : tau_gl=2 pour Amip et tau_gl=1 pour Hadisst2
+tau_gl= _AUTO_ : DEFAULT = 5.
+
+          # ???
+iflag_albedo=1
+
+          # Frequence appel rayonnement. Nombre appels par jour
+nbapp_cv=48
+
+          # Pour pouvoir revenir a un bug purement informatique de duplication
+          # des constantes thermodynamiques entre LMDZ et RRTM
+          # n : FORTEMENT CONSEILLE
+ok_bad_ecmwf_thermo=n
+
+###############################################################
+# Parametres nuages
+###############################################################
+
+          #seuils de la precipitation des nuages strateformes (D: 2.6e-4 2.6e-4)
+cld_lc_lsc=0.00065
+cld_lc_con=0.00065
+
+          #constante de temps pour eleminer eau lsc et convective
+          # (D: 3600. 3600.)
+cld_tau_lsc=900
+cld_tau_con=900
+
+          #facteurs correctifs sur la vitesse de chute des cristaux de glace (D: 1 1)
+ffallv_lsc=0.8
+ffallv_con=0.8
+
+          # coefficient sur la reevaporation de la pluie (D: 2.e-5 n)
+          # regle a 3.e-5 sur des cas de cumulus en 1D
+coef_eva=0.0001
+
+          # flag pour la reevaporation de la pluie
+          # 0: rien
+          # 1: a l ancienne
+          # 2: prend en compte la surface nuageuse max au dessus pour calculer
+          #    le max de reevaporation, comme ecart a la saturation. CONSEILLE
+iflag_evap_prec=2
+
+          # Modification de la plage de temperature pour la phase mixte
+          # liquide/glace des nuages
+          # Controle par les t_glace_min/max, exposant_glace,
+          # iflag_t_glace (D=0)
+t_glace_min=243.15
+t_glace_max=273.15
+exposant_glace=0.5
+iflag_t_glace=3
+
+          # Activation de la thermodynamique de la glace
+iflag_ice_thermo=1
+
+          # normalement elle ne sert plus a rien dans fisrtilp
+          # sinon elle est un peu toxique:
+          # IF (zt(i) .LT. t_coup.and.reevap_ice) zrfln(i)=0. (Jean-Baptiste)
+reevap_ice=n
+
+          #Bergeron
+iflag_bergeron=2
+
+          # temperature dependency of qsat for iterative procedure
+          # temporary flag to switch between the old (CMIP5, D=0)
+          # and new versions (=1) versions 
+iflag_fisrtilp_qsat=4
+
+          #calcul des proprietes des nuages convectifs (D:1 0.375 1.e-4) 
+iflag_cld_th=6
+fact_cldcon=1
+
+          # ?????
+facttemps=0
+
+          #calcul eau condensee et fraction nuageuse a partir des PDF
+          # (D:0, 0:version avec ratqs sinon nouvelles PDFs)  
+iflag_pdf=1
+
+          #calcul epaisseur optique et emmissivite des nuages (D: y 1 0.01 0.3)
+ok_newmicro=y
+
+          # Controle des ratqs grande echelle
+iflag_ratqs=4
+ratqsp0=45000
+ratqsdp=10000
+ratqsbas=0.002
+ratqshaut=0.4
+
+          #rayon effectif pour les nuages de glace (D:35)
+rad_froid=35
+
+          # Rayons effectif des gouttes nuageuses
+          # ACTIF SI ok_cdnc=0 dans config.def. (D~9 a 12 microns)
+rad_chau1=12
+rad_chau2=11
+
+	  # Rayon effectif des gouttes si ok_cdnc=0
+          # Parameters in CDNC-maer link (Boucher&Lohmann 1995)
+bl95_b0=1.3
+bl95_b1=0.2
+
+          #  Choix ou non  de  New oliq               
+new_oliq=y
+
+          # Seuils oliqmax, oicemax (en g/kg).
+          # Au dela on precipite directement au sol
+oliqmax=0.0015
+oicemax=0.0015
+
+          #Rayons min et max effectifs des particules des nuages
+rei_min=16
+rei_max=61.29
+
+          # Distribution vetricale sous maille pour le schema de de nuages.
+          # 0: rien
+          # 1: Premiere version A. Jam,
+          # 2 : J. Jouhaud, parametre cloudth_vert_alpha D=0.5
+          # 3 : J. Jouhaud, parametre cloudth_vert_alpha D=0.5/C= 1.32
+          #                           cloudth_vert_alpha_th C=2:91
+iflag_cloudth_vert=3
+cloudth_vert_alpha=0.5
+cloudth_vert_alpha_th=0.5
+
+
+######################################################################
+# Convection 
+######################################################################
+
+          #Convection scheme switch
+          # (D:2, 1:LMD, 2:Tiedtke, 3:KE New Physics, 30:KE AR4)
+iflag_con=3
+
+          #output level of energy conservation diagnostics
+if_ebil=0
+
+          #maximum efficiency of cld water->precipitation conversion (D: 0.993)
+epmax=0.999
+
+          #dry convective adjustment at beginning of Emanuel convective scheme (D: n 0)
+ok_adj_ema=n
+iflag_clw=0
+
+          #Convective closure (D:1, 0:AR4, 2:ALE and ALP)
+iflag_clos=2
+
+          #Convective entrainment mixing law (D:1, 0:AR4=flat PDF, 1=PDF)
+iflag_mix=1
+
+          #weights of the bell shaped and flat PDF (used only if iflag_mix=1) (D: 1 0)
+qqa1=1
+qqa2=0
+
+          #Parameters of the bell shaped PDF; Fmax=center (D= 0.65), Gammas=width (D=0.05)
+cvl_corr=1
+
+          #Multiplicative factor of Emanuel convective scheme precipitation (D: 1.)
+Fmax=0.65
+
+          #altitude, in hPa, above LCL at which buoybase is computed,
+          # def = original: -40
+dpbase=-40
+
+          #reference fractional area of precipitating downdraughts,
+          # def = original: 0.01
+sigdz=0.003
+
+          #unsaturated fraction of precipitating downdraughts, def = original: 0.15
+spfac=0.15
+
+          #relaxation time of cloud base mass flux, def = original: 8000
+tau=8000
+
+          #flag for wb (= vert velocity at LFC);
+          # 0->wb=wbmax, 1->wb=f(plfc) bounded, 2->wb=f(plfc) linear, D=1
+          # Si iflag_wb>=10 : wbeff_min=iflag_wb*0.1
+          # wbmax : assymptotic value 
+flag_wb=50
+wbmax=2.8
+
+          # Divers tests
+ok_convstop=n
+tau_stop=15000
+ok_intermittent=n
+
+          # nouvel epluchage de C.Rio
+          #shedding coefficient (used when iflag_mix_adiab=1)
+iflag_mix_adiab=0
+coef_peel=0.25
+
+          #Conversion cld water->precip: Ep=f(pressure) if 0; Ep=f(temperature)
+          #if 1, def=1
+flag_epKEorig=1
+
+          # Case : flag_epKEorig=1
+          # elcrit : max condensed water concentration in kg/kg, D=0.0003,
+          # tlcrit : temperature in degre Celsius, at which Ep=Epmax, D=-55. (original)
+          # original: 0.0011, used only if flag_epKEorig=1
+elcrit=0.0003
+tlcrit=-55
+
+          # Case : flag_epKEorig=0
+          # pbcrit : pressure (hPa), above LCL below which Ep=0, D=150 (original)
+          # ptcrit : pressure (hPa), above LCL above which Ep=Epmax, D=500 (original)
+pbcrit=150
+ptcrit=500
+
+          # Prevent some crashes
+          # Filter out bad wakes
+flag_wk_check_trgl=n
+iflag_wk_check_trgl=2
+iflag_alp_wk_cond=1
+
+
+          # Check whether parcel level temperature and specific humidity
+          # are reasonable and demand that LCL be high enough
+cv_flag_feed=2
+
+          # save 20% CPU 
+ok_optim_yield=y
+
+          # Convective clouds
+iflag_cld_cv=0
+
+          # To get back to bug where convective output variables
+          # were set to 0 at the start of the physics
+ok_bug_cv_trac=_AUTO_: DEFAULT = n
+
+##########################################################
+# Fermeture convective et couplages
+##########################################################
+
+          # Appel separe des thermiques 
+iflag_pbl_split=10
+
+          #rendement sur la puissance fournie par les thermiques a la convection
+alp_bl_k=0.5
+
+          #Constant value to be added to Alp (D: 0.)
+alp_offset=0
+
+          #Convection must reach a level at which T<t_top_max to be active
+t_top_max=1000
+
+          ### nrlmd le 10/04/2012: Declenchement ###
+          #Declenchement par couche-limite (0: deterministe, 1: stochastique)
+iflag_trig_bl=1
+
+          #Surface critique au LCL
+s_trig=12000000
+
+          #Temps de decorrelation entre scenes de cumulus
+tau_trig_shallow=1200
+
+          #Temps de decorrelation entre scenes de cumulonimbus
+tau_trig_deep=1200
+
+          # Pour la stabilisation
+random_notrig_max=0.99
+
+          # Temperature a la quelle on fond les descentes glacees
+tmax_fonte_cv=278.15
+
+          #Fermeture par couche-limite (Nicolas Rochetin)
+          #(0: deterministe, 1: statistique, 2: statistique+convergence
+          # grande echelle)
+iflag_clos_bl=1
+
+          #coefficient in Wape->C_star formula: C_star=stark*sqrt(2*Wape),
+          # def: 0.33
+stark=0.33
+
+          #lifting efficiency of wakes; Alp=Alpk*Fip, Fip=power provided
+          # by wakes, def: 0.25
+alpk=0.25
+
+#
+##########################################################
+# Couche limite convective / modele du thermique
+##########################################################
+
+          # Convection seche (D:0, 0:ajustement sec,=>1:modele du thermique) 
+iflag_thermals=18
+
+          # pas de temps du spliting pour les thermiques
+          # TOURNE MAIS POSE PLUS DE PROBLEME QU ELLE N EN RESOUD
+nsplit_thermals=1
+
+          # tau_thermals pour avoir une constante de temps sur les thermiques.
+          # Non valide
+tau_thermals=0
+
+          # Flag controlant le detrainement et l entrainement
+iflag_thermals_ed=8
+
+          # On va chercher l air a z * ( 1+fact_thermals_ed_dz) pour calculer
+          # le detrainement (A. Jam)
+fact_thermals_ed_dz=0.07
+
+          # Une option de plus sur les thermiques.
+iflag_thermals_optflux=0
+
+          #couplage ou non avec la convection
+iflag_coupl=5
+
+          # Seuil pour desactiver les thermiques en cas de forte inversion
+          # en sommet de couche limite. Actif si iflag_thermals impair.
+seuil_inversion=-0.08
+
+          # Reactivation du calcul d un zmax continu pour les thermiques
+          # reactivation d une fermeture humide des thermiques
+          # iflag_thermals_closure=2 (D=1)
+iflag_thermals_closure=2
+
+
+##########################################################
+# Flags wakes
+##########################################################
+
+          #Wake scheme switch (D:0, 0:AR4, 1:New Physics)
+iflag_wake=1
+
+          #multiplicative factor of the damping by gravity waves, def: 4.
+coefgw=4
+
+          #wake density = number of wake centers per m2, def: 8.E-12
+          #wdens_ref=8.E-12
+wdens_ref_o=1e-09
+wdens_ref_l=8e-12
+
+          # Ajustement convectif prealable au calcul des poches
+ok_adjwk=y
+
+
+####################################################################
+#  Conservation 
+####################################################################
+          # The source terms of the TKE prognostic equation are diagnosed
+# from tendencies (du, dv, dT) 
+          # associated with subrgrid scaleamotions and treated as an 
+          # additional heat source.
+          # Controled by a key, iflag_ener_conserv (D=-1):
+          # 0 : no conservation, -1 : old adhoc correction for kinetic E only
+          # (used for CMIP5) 
+          # 1 : conservation, 101 : conversion from kinetic to heat only,
+          # 110 conversion from potential to heat only
+iflag_ener_conserv=10
+
+          #Activation of corrections for water conservation (D: n). 
+          ##The default is n for compatibility with earlier versions.
+          ##generally it should be y.
+ok_conserv_q=y
+
+fl_cor_ebil=1
+
+####################################################################
+# Ozone
+####################################################################
+          # new treatment for ozone into the tropopause
+adjust_tropopause=y
+
+####################################################################
+#  Conservation de l'eau
+#####################################################################
+          # conservation de l eau sur les calottes
+ok_lic_cond=y
+####################################################################
+
+cdnc_min=10.
+          #min cloud droplet number concentration 
+ok_bug_split_th=n
+          # correct a bug in thermal splitting
+keepbug_ice_frac=n
+          # correct convection bug
Index: /CONFIG/UNIFORM/v6/IPSLCM6.3/GENERAL/PARAM/physiq.def_NPv6.2_MR025
===================================================================
--- /CONFIG/UNIFORM/v6/IPSLCM6.3/GENERAL/PARAM/physiq.def_NPv6.2_MR025	(revision 6531)
+++ /CONFIG/UNIFORM/v6/IPSLCM6.3/GENERAL/PARAM/physiq.def_NPv6.2_MR025	(revision 6531)
@@ -0,0 +1,538 @@
+#
+# $Id: physiq.def_NPv6.1 3964 2018-07-06 11:44:14Z acosce $
+#
+
+##############################################################
+# PARAMETRES ET CLES DE LA PHYSIQUE LMDZ
+##############################################################
+# D: Valeur par default
+#
+
+###########################################################
+# divers. Devrait aller dans config.def ?
+###########################################################
+##   Si=.T. ,  lecture du fichier limit avec la bonne annee 
+ok_limitvrai=n
+
+###########################################################
+# Parametres couche limite de surface
+###########################################################
+
+          #  ...
+f_cdrag_stable=1
+
+          # Facteur sur les coefficients de trainee terrestres
+f_cdrag_ter=1
+
+          # Vitesse minimum dans les calculs de trainee Cd ( || V || + Vmin )
+min_wind_speed=0.1
+
+          #  Modelisation des bosquets
+ifl_pbltree=1
+Cd_frein=0.016
+
+###########################################################
+# parameter des flux air-mer
+###########################################################
+
+          # Facteur sur les flux sensibles et latent
+          # Introduit pour reduire l evaporation quand on avait z0h=z0m
+          # CONSEILLE : 1
+f_cdrag_oce=1
+
+          # Flag controlant le calcul des z0
+iflag_z0_oce=1
+
+          # Rapport entre les Z0 latent et sensible
+f_z0qh_oce=1.55
+
+          # Activation des rafales : Oui 1 ou non 0
+iflag_gusts=2
+
+          # facteur pour les rafales des thermiques (bounary layer)
+f_gust_bl=0.845
+
+          # facteur pour les poches (wake)
+f_gust_wk=0.2
+
+          # facteur sur qsat pour tenir compte de la salinite
+f_qsat_oce=0.98
+
+          #cdmmax : valeur max de Cd moment. Sur ocean seulement
+cdmmax=0.2
+
+          #cdhmax : valeur max de Cd evap/sensible. Sur ocean seulement
+cdhmax=0.2
+
+####################################################################
+# Couche limite turbulente
+####################################################################
+
+          # Nouvelle version de Mellor et Yamada
+new_yamada4=y
+
+          # Choix du schema numerique pour new_yamada4=y
+          #  1 schema de MAR. Bien pour CL stables mais detruit les stratocu
+          #  5 schema de MAR modifie. Precaunise.
+yamada4_num=5
+
+          # Flag de controle de la couche limite stable
+iflag_corr_sta=4
+
+          # min sur les fonction de stabilite a la surface
+f_ri_cd_min=0.01
+
+          # max du Ric pour Kz. Decouplage plus grand pour Ric plus grand.
+yamada4_ric=0.18
+
+          # Longueur de melange minimum pour Kz
+lmixmin=0
+
+          #shema de la couche de surface (D:1, 1:LMD, 8:Mellor-Yamada) 
+iflag_pbl=12
+
+          # Seuils pour la diffusion turbulente
+ksta_ter=1e-07
+ksta=1e-10
+
+          #ok_kzmin : calcul Kzmin dans la CL de surface (D: y)
+ok_kzmin=n
+
+          # Creation de TKE par orographie sous-maille
+addtkeoro=2
+alphatkeoro=1
+smallscales_tkeoro=y
+
+
+####################################################################
+# Ondes de gravite / Orographie sous maille
+####################################################################
+
+          #  Orodr  ou  non   pour l orographie
+ok_orodr=y
+
+          #  Orolf  ou  non   pour l orographie              
+ok_orolf=y
+
+          #Rugoro : inclusion de l orographie sous maille dans le Cd de surface
+          # Obsolete avec l activation des ondes de gravite
+f_rugoro=0
+
+          # Parametres controlant l effet de l orographie sous maille
+sso_gfrcri=0.7
+sso_gkdrag=0.6
+sso_gkwake=0.4
+sso_gklift=0.1
+
+          # Random gravity waves
+          #Activitate the stochastic parameterization of convective GWs
+          # (should be equal to ok_strato)
+ok_gwd_rando=y
+
+          # Scale the momentum fluxes due to convective GWs
+gwd_rando_ruwmax=0.5
+
+          #Scale the saturated momentum flux of  convective GWs 
+gwd_rando_sat=0.6
+
+          # Important pour controler la periode de la QBO
+gwd_front_ruwmax=3
+
+
+###############################################################
+# Rayonnement
+###############################################################
+          # activation du nouveau code de rayonnement RRTM
+          # 0 : Ancien code et 1 : RRTM (D=0)
+iflag_rrtm=1
+
+          # Nombre de bandes pour le SW. Mettre 2 si iflag_rrtm=0
+NSW=6
+
+    # Albedo et inertie des calottes
+alb_vis_sno_lic=0.96
+alb_nir_sno_lic=0.68
+    # Controle de l'inertie des glaciers et banquises
+    # inertie_sno : pour la neige (y compris sur les points "ter"
+    #      quand orchidee n'est pas actif utilisÃ©)
+    # inertie_lic/sic : pour les "land ice" et "sea ice"
+inertie_sno=350
+    # iflag_sic=1 pour forcer Ã  garder l'inertie des "sea ice"
+    # a inertie_sic meme si la surface est couverte de neige
+iflag_sic=1
+inertie_lic=2000
+inertie_sic=2000
+    # tau_gl = constante de rappel de la temperature a la surface de la glace (en nombre de jours)
+    #     # Utilise celon le forcage : tau_gl=2 pour Amip et tau_gl=1 pour Hadisst2
+tau_gl= _AUTO_ : DEFAULT = 5.
+
+          # ???
+iflag_albedo=1
+
+          # Frequence appel rayonnement. Nombre appels par jour
+nbapp_cv=48
+
+          # Pour pouvoir revenir a un bug purement informatique de duplication
+          # des constantes thermodynamiques entre LMDZ et RRTM
+          # n : FORTEMENT CONSEILLE
+ok_bad_ecmwf_thermo=n
+
+###############################################################
+# Parametres nuages
+###############################################################
+
+          #seuils de la precipitation des nuages strateformes (D: 2.6e-4 2.6e-4)
+cld_lc_lsc=0.00044
+cld_lc_con=0.00044
+
+          #constante de temps pour eleminer eau lsc et convective
+          # (D: 3600. 3600.)
+cld_tau_lsc=900
+cld_tau_con=900
+
+          #facteurs correctifs sur la vitesse de chute des cristaux de glace (D: 1 1)
+ffallv_lsc=0.8
+ffallv_con=0.8
+
+          # coefficient sur la reevaporation de la pluie (D: 2.e-5 n)
+          # regle a 3.e-5 sur des cas de cumulus en 1D
+coef_eva=0.0001
+
+          # flag pour la reevaporation de la pluie
+          # 0: rien
+          # 1: a l ancienne
+          # 2: prend en compte la surface nuageuse max au dessus pour calculer
+          #    le max de reevaporation, comme ecart a la saturation. CONSEILLE
+iflag_evap_prec=2
+
+          # Modification de la plage de temperature pour la phase mixte
+          # liquide/glace des nuages
+          # Controle par les t_glace_min/max, exposant_glace,
+          # iflag_t_glace (D=0)
+t_glace_min=243.15
+t_glace_max=273.15
+exposant_glace=0.5
+iflag_t_glace=3
+
+          # Activation de la thermodynamique de la glace
+iflag_ice_thermo=1
+
+          # normalement elle ne sert plus a rien dans fisrtilp
+          # sinon elle est un peu toxique:
+          # IF (zt(i) .LT. t_coup.and.reevap_ice) zrfln(i)=0. (Jean-Baptiste)
+reevap_ice=n
+
+          #Bergeron
+iflag_bergeron=2
+
+          # temperature dependency of qsat for iterative procedure
+          # temporary flag to switch between the old (CMIP5, D=0)
+          # and new versions (=1) versions 
+iflag_fisrtilp_qsat=4
+
+          #calcul des proprietes des nuages convectifs (D:1 0.375 1.e-4) 
+iflag_cld_th=6
+fact_cldcon=1
+
+          # ?????
+facttemps=0
+
+          #calcul eau condensee et fraction nuageuse a partir des PDF
+          # (D:0, 0:version avec ratqs sinon nouvelles PDFs)  
+iflag_pdf=1
+
+          #calcul epaisseur optique et emmissivite des nuages (D: y 1 0.01 0.3)
+ok_newmicro=y
+
+          # Controle des ratqs grande echelle
+iflag_ratqs=4
+ratqsp0=45000
+ratqsdp=10000
+ratqsbas=0.002
+ratqshaut=0.4
+
+          #rayon effectif pour les nuages de glace (D:35)
+rad_froid=35
+
+          # Rayons effectif des gouttes nuageuses
+          # ACTIF SI ok_cdnc=0 dans config.def. (D~9 a 12 microns)
+rad_chau1=12
+rad_chau2=11
+
+	  # Rayon effectif des gouttes si ok_cdnc=0
+          # Parameters in CDNC-maer link (Boucher&Lohmann 1995)
+bl95_b0=1.3
+bl95_b1=0.2
+
+          #  Choix ou non  de  New oliq               
+new_oliq=y
+
+          # Seuils oliqmax, oicemax (en g/kg).
+          # Au dela on precipite directement au sol
+oliqmax=0.0015
+oicemax=0.0015
+
+          #Rayons min et max effectifs des particules des nuages
+rei_min=16
+rei_max=61.29
+
+          # Distribution vetricale sous maille pour le schema de de nuages.
+          # 0: rien
+          # 1: Premiere version A. Jam,
+          # 2 : J. Jouhaud, parametre cloudth_vert_alpha D=0.5
+          # 3 : J. Jouhaud, parametre cloudth_vert_alpha D=0.5/C= 1.32
+          #                           cloudth_vert_alpha_th C=2:91
+iflag_cloudth_vert=3
+cloudth_vert_alpha=0.5
+cloudth_vert_alpha_th=0.5
+
+
+######################################################################
+# Convection 
+######################################################################
+
+          #Convection scheme switch
+          # (D:2, 1:LMD, 2:Tiedtke, 3:KE New Physics, 30:KE AR4)
+iflag_con=3
+
+          #output level of energy conservation diagnostics
+if_ebil=0
+
+          #maximum efficiency of cld water->precipitation conversion (D: 0.993)
+epmax=0.999
+
+          #dry convective adjustment at beginning of Emanuel convective scheme (D: n 0)
+ok_adj_ema=n
+iflag_clw=0
+
+          #Convective closure (D:1, 0:AR4, 2:ALE and ALP)
+iflag_clos=2
+
+          #Convective entrainment mixing law (D:1, 0:AR4=flat PDF, 1=PDF)
+iflag_mix=1
+
+          #weights of the bell shaped and flat PDF (used only if iflag_mix=1) (D: 1 0)
+qqa1=1
+qqa2=0
+
+          #Parameters of the bell shaped PDF; Fmax=center (D= 0.65), Gammas=width (D=0.05)
+cvl_corr=1
+
+          #Multiplicative factor of Emanuel convective scheme precipitation (D: 1.)
+Fmax=0.65
+
+          #altitude, in hPa, above LCL at which buoybase is computed,
+          # def = original: -40
+dpbase=-40
+
+          #reference fractional area of precipitating downdraughts,
+          # def = original: 0.01
+sigdz=0.003
+
+          #unsaturated fraction of precipitating downdraughts, def = original: 0.15
+spfac=0.15
+
+          #relaxation time of cloud base mass flux, def = original: 8000
+tau=8000
+
+          #flag for wb (= vert velocity at LFC);
+          # 0->wb=wbmax, 1->wb=f(plfc) bounded, 2->wb=f(plfc) linear, D=1
+          # Si iflag_wb>=10 : wbeff_min=iflag_wb*0.1
+          # wbmax : assymptotic value 
+flag_wb=50
+wbmax=2.8
+
+          # Divers tests
+ok_convstop=n
+tau_stop=15000
+ok_intermittent=n
+
+          # nouvel epluchage de C.Rio
+          #shedding coefficient (used when iflag_mix_adiab=1)
+iflag_mix_adiab=0
+coef_peel=0.25
+
+          #Conversion cld water->precip: Ep=f(pressure) if 0; Ep=f(temperature)
+          #if 1, def=1
+flag_epKEorig=1
+
+          # Case : flag_epKEorig=1
+          # elcrit : max condensed water concentration in kg/kg, D=0.0003,
+          # tlcrit : temperature in degre Celsius, at which Ep=Epmax, D=-55. (original)
+          # original: 0.0011, used only if flag_epKEorig=1
+elcrit=0.0003
+tlcrit=-55
+
+          # Case : flag_epKEorig=0
+          # pbcrit : pressure (hPa), above LCL below which Ep=0, D=150 (original)
+          # ptcrit : pressure (hPa), above LCL above which Ep=Epmax, D=500 (original)
+pbcrit=150
+ptcrit=500
+
+          # Prevent some crashes
+          # Filter out bad wakes
+flag_wk_check_trgl=n
+iflag_wk_check_trgl=2
+iflag_alp_wk_cond=1
+
+
+          # Check whether parcel level temperature and specific humidity
+          # are reasonable and demand that LCL be high enough
+cv_flag_feed=2
+
+          # save 20% CPU 
+ok_optim_yield=y
+
+          # Convective clouds
+iflag_cld_cv=0
+
+          # To get back to bug where convective output variables
+          # were set to 0 at the start of the physics
+ok_bug_cv_trac=_AUTO_: DEFAULT = n
+
+##########################################################
+# Fermeture convective et couplages
+##########################################################
+
+          # Appel separe des thermiques 
+iflag_pbl_split=10
+
+          #rendement sur la puissance fournie par les thermiques a la convection
+alp_bl_k=0.5
+
+          #Constant value to be added to Alp (D: 0.)
+alp_offset=0
+
+          #Convection must reach a level at which T<t_top_max to be active
+t_top_max=1000
+
+          ### nrlmd le 10/04/2012: Declenchement ###
+          #Declenchement par couche-limite (0: deterministe, 1: stochastique)
+iflag_trig_bl=1
+
+          #Surface critique au LCL
+s_trig=12000000
+
+          #Temps de decorrelation entre scenes de cumulus
+tau_trig_shallow=1200
+
+          #Temps de decorrelation entre scenes de cumulonimbus
+tau_trig_deep=1200
+
+          # Pour la stabilisation
+random_notrig_max=0.99
+
+          # Temperature a la quelle on fond les descentes glacees
+tmax_fonte_cv=278.15
+
+          #Fermeture par couche-limite (Nicolas Rochetin)
+          #(0: deterministe, 1: statistique, 2: statistique+convergence
+          # grande echelle)
+iflag_clos_bl=1
+
+          #coefficient in Wape->C_star formula: C_star=stark*sqrt(2*Wape),
+          # def: 0.33
+stark=0.33
+
+          #lifting efficiency of wakes; Alp=Alpk*Fip, Fip=power provided
+          # by wakes, def: 0.25
+alpk=0.25
+
+#
+##########################################################
+# Couche limite convective / modele du thermique
+##########################################################
+
+          # Convection seche (D:0, 0:ajustement sec,=>1:modele du thermique) 
+iflag_thermals=18
+
+          # pas de temps du spliting pour les thermiques
+          # TOURNE MAIS POSE PLUS DE PROBLEME QU ELLE N EN RESOUD
+nsplit_thermals=1
+
+          # tau_thermals pour avoir une constante de temps sur les thermiques.
+          # Non valide
+tau_thermals=0
+
+          # Flag controlant le detrainement et l entrainement
+iflag_thermals_ed=8
+
+          # On va chercher l air a z * ( 1+fact_thermals_ed_dz) pour calculer
+          # le detrainement (A. Jam)
+fact_thermals_ed_dz=0.07
+
+          # Une option de plus sur les thermiques.
+iflag_thermals_optflux=0
+
+          #couplage ou non avec la convection
+iflag_coupl=5
+
+          # Seuil pour desactiver les thermiques en cas de forte inversion
+          # en sommet de couche limite. Actif si iflag_thermals impair.
+seuil_inversion=-0.08
+
+          # Reactivation du calcul d un zmax continu pour les thermiques
+          # reactivation d une fermeture humide des thermiques
+          # iflag_thermals_closure=2 (D=1)
+iflag_thermals_closure=2
+
+
+##########################################################
+# Flags wakes
+##########################################################
+
+          #Wake scheme switch (D:0, 0:AR4, 1:New Physics)
+iflag_wake=1
+
+          #multiplicative factor of the damping by gravity waves, def: 4.
+coefgw=4
+
+          #wake density = number of wake centers per m2, def: 8.E-12
+          #wdens_ref=8.E-12
+wdens_ref_o=1e-09
+wdens_ref_l=8e-12
+
+          # Ajustement convectif prealable au calcul des poches
+ok_adjwk=y
+
+
+####################################################################
+#  Conservation 
+####################################################################
+          # The source terms of the TKE prognostic equation are diagnosed
+# from tendencies (du, dv, dT) 
+          # associated with subrgrid scaleamotions and treated as an 
+          # additional heat source.
+          # Controled by a key, iflag_ener_conserv (D=-1):
+          # 0 : no conservation, -1 : old adhoc correction for kinetic E only
+          # (used for CMIP5) 
+          # 1 : conservation, 101 : conversion from kinetic to heat only,
+          # 110 conversion from potential to heat only
+iflag_ener_conserv=10
+
+          #Activation of corrections for water conservation (D: n). 
+          ##The default is n for compatibility with earlier versions.
+          ##generally it should be y.
+ok_conserv_q=y
+
+fl_cor_ebil=1
+
+####################################################################
+# Ozone
+####################################################################
+          # new treatment for ozone into the tropopause
+adjust_tropopause=y
+
+####################################################################
+#  Conservation de l'eau
+#####################################################################
+          # conservation de l eau sur les calottes
+ok_lic_cond=y
+####################################################################
+
+cdnc_min=10.
+          #min cloud droplet number concentration 
+ok_bug_split_th=n
+          # correct a bug in thermal splitting
+keepbug_ice_frac=n
+          # correct convection bug
Index: /CONFIG/UNIFORM/v6/IPSLCM6.3/GENERAL/PARAM/physiq.def_NPv6.2_MR1
===================================================================
--- /CONFIG/UNIFORM/v6/IPSLCM6.3/GENERAL/PARAM/physiq.def_NPv6.2_MR1	(revision 6531)
+++ /CONFIG/UNIFORM/v6/IPSLCM6.3/GENERAL/PARAM/physiq.def_NPv6.2_MR1	(revision 6531)
@@ -0,0 +1,538 @@
+#
+# $Id: physiq.def_NPv6.1 3964 2018-07-06 11:44:14Z acosce $
+#
+
+##############################################################
+# PARAMETRES ET CLES DE LA PHYSIQUE LMDZ
+##############################################################
+# D: Valeur par default
+#
+
+###########################################################
+# divers. Devrait aller dans config.def ?
+###########################################################
+##   Si=.T. ,  lecture du fichier limit avec la bonne annee 
+ok_limitvrai=n
+
+###########################################################
+# Parametres couche limite de surface
+###########################################################
+
+          #  ...
+f_cdrag_stable=1
+
+          # Facteur sur les coefficients de trainee terrestres
+f_cdrag_ter=1
+
+          # Vitesse minimum dans les calculs de trainee Cd ( || V || + Vmin )
+min_wind_speed=0.1
+
+          #  Modelisation des bosquets
+ifl_pbltree=1
+Cd_frein=0.016
+
+###########################################################
+# parameter des flux air-mer
+###########################################################
+
+          # Facteur sur les flux sensibles et latent
+          # Introduit pour reduire l evaporation quand on avait z0h=z0m
+          # CONSEILLE : 1
+f_cdrag_oce=1
+
+          # Flag controlant le calcul des z0
+iflag_z0_oce=1
+
+          # Rapport entre les Z0 latent et sensible
+f_z0qh_oce=1.55
+
+          # Activation des rafales : Oui 1 ou non 0
+iflag_gusts=2
+
+          # facteur pour les rafales des thermiques (bounary layer)
+f_gust_bl=0.845
+
+          # facteur pour les poches (wake)
+f_gust_wk=0.2
+
+          # facteur sur qsat pour tenir compte de la salinite
+f_qsat_oce=0.98
+
+          #cdmmax : valeur max de Cd moment. Sur ocean seulement
+cdmmax=0.2
+
+          #cdhmax : valeur max de Cd evap/sensible. Sur ocean seulement
+cdhmax=0.2
+
+####################################################################
+# Couche limite turbulente
+####################################################################
+
+          # Nouvelle version de Mellor et Yamada
+new_yamada4=y
+
+          # Choix du schema numerique pour new_yamada4=y
+          #  1 schema de MAR. Bien pour CL stables mais detruit les stratocu
+          #  5 schema de MAR modifie. Precaunise.
+yamada4_num=5
+
+          # Flag de controle de la couche limite stable
+iflag_corr_sta=4
+
+          # min sur les fonction de stabilite a la surface
+f_ri_cd_min=0.01
+
+          # max du Ric pour Kz. Decouplage plus grand pour Ric plus grand.
+yamada4_ric=0.18
+
+          # Longueur de melange minimum pour Kz
+lmixmin=0
+
+          #shema de la couche de surface (D:1, 1:LMD, 8:Mellor-Yamada) 
+iflag_pbl=12
+
+          # Seuils pour la diffusion turbulente
+ksta_ter=1e-07
+ksta=1e-10
+
+          #ok_kzmin : calcul Kzmin dans la CL de surface (D: y)
+ok_kzmin=n
+
+          # Creation de TKE par orographie sous-maille
+addtkeoro=2
+alphatkeoro=1
+smallscales_tkeoro=y
+
+
+####################################################################
+# Ondes de gravite / Orographie sous maille
+####################################################################
+
+          #  Orodr  ou  non   pour l orographie
+ok_orodr=y
+
+          #  Orolf  ou  non   pour l orographie              
+ok_orolf=y
+
+          #Rugoro : inclusion de l orographie sous maille dans le Cd de surface
+          # Obsolete avec l activation des ondes de gravite
+f_rugoro=0
+
+          # Parametres controlant l effet de l orographie sous maille
+sso_gfrcri=0.7
+sso_gkdrag=0.6
+sso_gkwake=0.4
+sso_gklift=0.1
+
+          # Random gravity waves
+          #Activitate the stochastic parameterization of convective GWs
+          # (should be equal to ok_strato)
+ok_gwd_rando=y
+
+          # Scale the momentum fluxes due to convective GWs
+gwd_rando_ruwmax=0.5
+
+          #Scale the saturated momentum flux of  convective GWs 
+gwd_rando_sat=0.6
+
+          # Important pour controler la periode de la QBO
+gwd_front_ruwmax=3
+
+
+###############################################################
+# Rayonnement
+###############################################################
+          # activation du nouveau code de rayonnement RRTM
+          # 0 : Ancien code et 1 : RRTM (D=0)
+iflag_rrtm=1
+
+          # Nombre de bandes pour le SW. Mettre 2 si iflag_rrtm=0
+NSW=6
+
+    # Albedo et inertie des calottes
+alb_vis_sno_lic=0.96
+alb_nir_sno_lic=0.68
+    # Controle de l'inertie des glaciers et banquises
+    # inertie_sno : pour la neige (y compris sur les points "ter"
+    #      quand orchidee n'est pas actif utilisÃ©)
+    # inertie_lic/sic : pour les "land ice" et "sea ice"
+inertie_sno=350
+    # iflag_sic=1 pour forcer Ã  garder l'inertie des "sea ice"
+    # a inertie_sic meme si la surface est couverte de neige
+iflag_sic=1
+inertie_lic=2000
+inertie_sic=2000
+    # tau_gl = constante de rappel de la temperature a la surface de la glace (en nombre de jours)
+    #     # Utilise celon le forcage : tau_gl=2 pour Amip et tau_gl=1 pour Hadisst2
+tau_gl= _AUTO_ : DEFAULT = 5.
+
+          # ???
+iflag_albedo=1
+
+          # Frequence appel rayonnement. Nombre appels par jour
+nbapp_cv=48
+
+          # Pour pouvoir revenir a un bug purement informatique de duplication
+          # des constantes thermodynamiques entre LMDZ et RRTM
+          # n : FORTEMENT CONSEILLE
+ok_bad_ecmwf_thermo=n
+
+###############################################################
+# Parametres nuages
+###############################################################
+
+          #seuils de la precipitation des nuages strateformes (D: 2.6e-4 2.6e-4)
+cld_lc_lsc=0.00048
+cld_lc_con=0.00048
+
+          #constante de temps pour eleminer eau lsc et convective
+          # (D: 3600. 3600.)
+cld_tau_lsc=900
+cld_tau_con=900
+
+          #facteurs correctifs sur la vitesse de chute des cristaux de glace (D: 1 1)
+ffallv_lsc=0.8
+ffallv_con=0.8
+
+          # coefficient sur la reevaporation de la pluie (D: 2.e-5 n)
+          # regle a 3.e-5 sur des cas de cumulus en 1D
+coef_eva=0.0001
+
+          # flag pour la reevaporation de la pluie
+          # 0: rien
+          # 1: a l ancienne
+          # 2: prend en compte la surface nuageuse max au dessus pour calculer
+          #    le max de reevaporation, comme ecart a la saturation. CONSEILLE
+iflag_evap_prec=2
+
+          # Modification de la plage de temperature pour la phase mixte
+          # liquide/glace des nuages
+          # Controle par les t_glace_min/max, exposant_glace,
+          # iflag_t_glace (D=0)
+t_glace_min=243.15
+t_glace_max=273.15
+exposant_glace=0.5
+iflag_t_glace=3
+
+          # Activation de la thermodynamique de la glace
+iflag_ice_thermo=1
+
+          # normalement elle ne sert plus a rien dans fisrtilp
+          # sinon elle est un peu toxique:
+          # IF (zt(i) .LT. t_coup.and.reevap_ice) zrfln(i)=0. (Jean-Baptiste)
+reevap_ice=n
+
+          #Bergeron
+iflag_bergeron=2
+
+          # temperature dependency of qsat for iterative procedure
+          # temporary flag to switch between the old (CMIP5, D=0)
+          # and new versions (=1) versions 
+iflag_fisrtilp_qsat=4
+
+          #calcul des proprietes des nuages convectifs (D:1 0.375 1.e-4) 
+iflag_cld_th=6
+fact_cldcon=1
+
+          # ?????
+facttemps=0
+
+          #calcul eau condensee et fraction nuageuse a partir des PDF
+          # (D:0, 0:version avec ratqs sinon nouvelles PDFs)  
+iflag_pdf=1
+
+          #calcul epaisseur optique et emmissivite des nuages (D: y 1 0.01 0.3)
+ok_newmicro=y
+
+          # Controle des ratqs grande echelle
+iflag_ratqs=4
+ratqsp0=45000
+ratqsdp=10000
+ratqsbas=0.002
+ratqshaut=0.4
+
+          #rayon effectif pour les nuages de glace (D:35)
+rad_froid=35
+
+          # Rayons effectif des gouttes nuageuses
+          # ACTIF SI ok_cdnc=0 dans config.def. (D~9 a 12 microns)
+rad_chau1=12
+rad_chau2=11
+
+	  # Rayon effectif des gouttes si ok_cdnc=0
+          # Parameters in CDNC-maer link (Boucher&Lohmann 1995)
+bl95_b0=1.3
+bl95_b1=0.2
+
+          #  Choix ou non  de  New oliq               
+new_oliq=y
+
+          # Seuils oliqmax, oicemax (en g/kg).
+          # Au dela on precipite directement au sol
+oliqmax=0.0015
+oicemax=0.0015
+
+          #Rayons min et max effectifs des particules des nuages
+rei_min=16
+rei_max=61.29
+
+          # Distribution vetricale sous maille pour le schema de de nuages.
+          # 0: rien
+          # 1: Premiere version A. Jam,
+          # 2 : J. Jouhaud, parametre cloudth_vert_alpha D=0.5
+          # 3 : J. Jouhaud, parametre cloudth_vert_alpha D=0.5/C= 1.32
+          #                           cloudth_vert_alpha_th C=2:91
+iflag_cloudth_vert=3
+cloudth_vert_alpha=0.5
+cloudth_vert_alpha_th=0.5
+
+
+######################################################################
+# Convection 
+######################################################################
+
+          #Convection scheme switch
+          # (D:2, 1:LMD, 2:Tiedtke, 3:KE New Physics, 30:KE AR4)
+iflag_con=3
+
+          #output level of energy conservation diagnostics
+if_ebil=0
+
+          #maximum efficiency of cld water->precipitation conversion (D: 0.993)
+epmax=0.999
+
+          #dry convective adjustment at beginning of Emanuel convective scheme (D: n 0)
+ok_adj_ema=n
+iflag_clw=0
+
+          #Convective closure (D:1, 0:AR4, 2:ALE and ALP)
+iflag_clos=2
+
+          #Convective entrainment mixing law (D:1, 0:AR4=flat PDF, 1=PDF)
+iflag_mix=1
+
+          #weights of the bell shaped and flat PDF (used only if iflag_mix=1) (D: 1 0)
+qqa1=1
+qqa2=0
+
+          #Parameters of the bell shaped PDF; Fmax=center (D= 0.65), Gammas=width (D=0.05)
+cvl_corr=1
+
+          #Multiplicative factor of Emanuel convective scheme precipitation (D: 1.)
+Fmax=0.65
+
+          #altitude, in hPa, above LCL at which buoybase is computed,
+          # def = original: -40
+dpbase=-40
+
+          #reference fractional area of precipitating downdraughts,
+          # def = original: 0.01
+sigdz=0.003
+
+          #unsaturated fraction of precipitating downdraughts, def = original: 0.15
+spfac=0.15
+
+          #relaxation time of cloud base mass flux, def = original: 8000
+tau=8000
+
+          #flag for wb (= vert velocity at LFC);
+          # 0->wb=wbmax, 1->wb=f(plfc) bounded, 2->wb=f(plfc) linear, D=1
+          # Si iflag_wb>=10 : wbeff_min=iflag_wb*0.1
+          # wbmax : assymptotic value 
+flag_wb=50
+wbmax=2.8
+
+          # Divers tests
+ok_convstop=n
+tau_stop=15000
+ok_intermittent=n
+
+          # nouvel epluchage de C.Rio
+          #shedding coefficient (used when iflag_mix_adiab=1)
+iflag_mix_adiab=0
+coef_peel=0.25
+
+          #Conversion cld water->precip: Ep=f(pressure) if 0; Ep=f(temperature)
+          #if 1, def=1
+flag_epKEorig=1
+
+          # Case : flag_epKEorig=1
+          # elcrit : max condensed water concentration in kg/kg, D=0.0003,
+          # tlcrit : temperature in degre Celsius, at which Ep=Epmax, D=-55. (original)
+          # original: 0.0011, used only if flag_epKEorig=1
+elcrit=0.0003
+tlcrit=-55
+
+          # Case : flag_epKEorig=0
+          # pbcrit : pressure (hPa), above LCL below which Ep=0, D=150 (original)
+          # ptcrit : pressure (hPa), above LCL above which Ep=Epmax, D=500 (original)
+pbcrit=150
+ptcrit=500
+
+          # Prevent some crashes
+          # Filter out bad wakes
+flag_wk_check_trgl=n
+iflag_wk_check_trgl=2
+iflag_alp_wk_cond=1
+
+
+          # Check whether parcel level temperature and specific humidity
+          # are reasonable and demand that LCL be high enough
+cv_flag_feed=2
+
+          # save 20% CPU 
+ok_optim_yield=y
+
+          # Convective clouds
+iflag_cld_cv=0
+
+          # To get back to bug where convective output variables
+          # were set to 0 at the start of the physics
+ok_bug_cv_trac=_AUTO_: DEFAULT = n
+
+##########################################################
+# Fermeture convective et couplages
+##########################################################
+
+          # Appel separe des thermiques 
+iflag_pbl_split=10
+
+          #rendement sur la puissance fournie par les thermiques a la convection
+alp_bl_k=0.5
+
+          #Constant value to be added to Alp (D: 0.)
+alp_offset=0
+
+          #Convection must reach a level at which T<t_top_max to be active
+t_top_max=1000
+
+          ### nrlmd le 10/04/2012: Declenchement ###
+          #Declenchement par couche-limite (0: deterministe, 1: stochastique)
+iflag_trig_bl=1
+
+          #Surface critique au LCL
+s_trig=12000000
+
+          #Temps de decorrelation entre scenes de cumulus
+tau_trig_shallow=1200
+
+          #Temps de decorrelation entre scenes de cumulonimbus
+tau_trig_deep=1200
+
+          # Pour la stabilisation
+random_notrig_max=0.99
+
+          # Temperature a la quelle on fond les descentes glacees
+tmax_fonte_cv=278.15
+
+          #Fermeture par couche-limite (Nicolas Rochetin)
+          #(0: deterministe, 1: statistique, 2: statistique+convergence
+          # grande echelle)
+iflag_clos_bl=1
+
+          #coefficient in Wape->C_star formula: C_star=stark*sqrt(2*Wape),
+          # def: 0.33
+stark=0.33
+
+          #lifting efficiency of wakes; Alp=Alpk*Fip, Fip=power provided
+          # by wakes, def: 0.25
+alpk=0.25
+
+#
+##########################################################
+# Couche limite convective / modele du thermique
+##########################################################
+
+          # Convection seche (D:0, 0:ajustement sec,=>1:modele du thermique) 
+iflag_thermals=18
+
+          # pas de temps du spliting pour les thermiques
+          # TOURNE MAIS POSE PLUS DE PROBLEME QU ELLE N EN RESOUD
+nsplit_thermals=1
+
+          # tau_thermals pour avoir une constante de temps sur les thermiques.
+          # Non valide
+tau_thermals=0
+
+          # Flag controlant le detrainement et l entrainement
+iflag_thermals_ed=8
+
+          # On va chercher l air a z * ( 1+fact_thermals_ed_dz) pour calculer
+          # le detrainement (A. Jam)
+fact_thermals_ed_dz=0.07
+
+          # Une option de plus sur les thermiques.
+iflag_thermals_optflux=0
+
+          #couplage ou non avec la convection
+iflag_coupl=5
+
+          # Seuil pour desactiver les thermiques en cas de forte inversion
+          # en sommet de couche limite. Actif si iflag_thermals impair.
+seuil_inversion=-0.08
+
+          # Reactivation du calcul d un zmax continu pour les thermiques
+          # reactivation d une fermeture humide des thermiques
+          # iflag_thermals_closure=2 (D=1)
+iflag_thermals_closure=2
+
+
+##########################################################
+# Flags wakes
+##########################################################
+
+          #Wake scheme switch (D:0, 0:AR4, 1:New Physics)
+iflag_wake=1
+
+          #multiplicative factor of the damping by gravity waves, def: 4.
+coefgw=4
+
+          #wake density = number of wake centers per m2, def: 8.E-12
+          #wdens_ref=8.E-12
+wdens_ref_o=1e-09
+wdens_ref_l=8e-12
+
+          # Ajustement convectif prealable au calcul des poches
+ok_adjwk=y
+
+
+####################################################################
+#  Conservation 
+####################################################################
+          # The source terms of the TKE prognostic equation are diagnosed
+# from tendencies (du, dv, dT) 
+          # associated with subrgrid scaleamotions and treated as an 
+          # additional heat source.
+          # Controled by a key, iflag_ener_conserv (D=-1):
+          # 0 : no conservation, -1 : old adhoc correction for kinetic E only
+          # (used for CMIP5) 
+          # 1 : conservation, 101 : conversion from kinetic to heat only,
+          # 110 conversion from potential to heat only
+iflag_ener_conserv=10
+
+          #Activation of corrections for water conservation (D: n). 
+          ##The default is n for compatibility with earlier versions.
+          ##generally it should be y.
+ok_conserv_q=y
+
+fl_cor_ebil=1
+
+####################################################################
+# Ozone
+####################################################################
+          # new treatment for ozone into the tropopause
+adjust_tropopause=y
+
+####################################################################
+#  Conservation de l'eau
+#####################################################################
+          # conservation de l eau sur les calottes
+ok_lic_cond=y
+####################################################################
+
+cdnc_min=10.
+          #min cloud droplet number concentration 
+ok_bug_split_th=n
+          # correct a bug in thermal splitting
+keepbug_ice_frac=n
+          # correct convection bug
Index: /CONFIG/UNIFORM/v6/IPSLCM6.3/GENERAL/PARAM/physiq.def_NPv6.2_strataer
===================================================================
--- /CONFIG/UNIFORM/v6/IPSLCM6.3/GENERAL/PARAM/physiq.def_NPv6.2_strataer	(revision 6531)
+++ /CONFIG/UNIFORM/v6/IPSLCM6.3/GENERAL/PARAM/physiq.def_NPv6.2_strataer	(revision 6531)
@@ -0,0 +1,590 @@
+#
+# $Id: physiq.def_NPv6.1 3964 2018-07-06 11:44:14Z acosce $
+#
+
+##############################################################
+# PARAMETRES ET CLES DE LA PHYSIQUE LMDZ
+##############################################################
+# D: Valeur par default
+#
+
+###########################################################
+# divers. Devrait aller dans config.def ?
+###########################################################
+##   Si=.T. ,  lecture du fichier limit avec la bonne annee 
+ok_limitvrai=n
+
+###########################################################
+# Parametres couche limite de surface
+###########################################################
+
+          #  ...
+f_cdrag_stable=1
+
+          # Facteur sur les coefficients de trainee terrestres
+f_cdrag_ter=1
+
+          # Vitesse minimum dans les calculs de trainee Cd ( || V || + Vmin )
+min_wind_speed=0.1
+
+          #  Modelisation des bosquets
+ifl_pbltree=1
+Cd_frein=0.016
+
+###########################################################
+# parameter des flux air-mer
+###########################################################
+
+          # Facteur sur les flux sensibles et latent
+          # Introduit pour reduire l evaporation quand on avait z0h=z0m
+          # CONSEILLE : 1
+f_cdrag_oce=1
+
+          # Flag controlant le calcul des z0
+iflag_z0_oce=1
+
+          # Rapport entre les Z0 latent et sensible
+f_z0qh_oce=1.55
+
+          # Activation des rafales : Oui 1 ou non 0
+iflag_gusts=2
+
+          # facteur pour les rafales des thermiques (bounary layer)
+f_gust_bl=0.845
+
+          # facteur pour les poches (wake)
+f_gust_wk=0.2
+
+          # facteur sur qsat pour tenir compte de la salinite
+f_qsat_oce=0.98
+
+          #cdmmax : valeur max de Cd moment. Sur ocean seulement
+cdmmax=0.2
+
+          #cdhmax : valeur max de Cd evap/sensible. Sur ocean seulement
+cdhmax=0.2
+
+####################################################################
+# Couche limite turbulente
+####################################################################
+
+          # Nouvelle version de Mellor et Yamada
+new_yamada4=y
+
+          # Choix du schema numerique pour new_yamada4=y
+          #  1 schema de MAR. Bien pour CL stables mais detruit les stratocu
+          #  5 schema de MAR modifie. Precaunise.
+yamada4_num=5
+
+          # Flag de controle de la couche limite stable
+iflag_corr_sta=4
+
+          # min sur les fonction de stabilite a la surface
+f_ri_cd_min=0.01
+
+          # max du Ric pour Kz. Decouplage plus grand pour Ric plus grand.
+yamada4_ric=0.18
+
+          # Longueur de melange minimum pour Kz
+lmixmin=0
+
+          #shema de la couche de surface (D:1, 1:LMD, 8:Mellor-Yamada) 
+iflag_pbl=12
+
+          # Seuils pour la diffusion turbulente
+ksta_ter=1e-07
+ksta=1e-10
+
+          #ok_kzmin : calcul Kzmin dans la CL de surface (D: y)
+ok_kzmin=n
+
+          # Creation de TKE par orographie sous-maille
+addtkeoro=2
+alphatkeoro=1
+smallscales_tkeoro=y
+
+
+####################################################################
+# Ondes de gravite / Orographie sous maille
+####################################################################
+
+          #  Orodr  ou  non   pour l orographie
+ok_orodr=y
+
+          #  Orolf  ou  non   pour l orographie              
+ok_orolf=y
+
+          #Rugoro : inclusion de l orographie sous maille dans le Cd de surface
+          # Obsolete avec l activation des ondes de gravite
+f_rugoro=0
+
+          # Parametres controlant l effet de l orographie sous maille
+sso_gfrcri=0.7
+sso_gkdrag=0.6
+sso_gkwake=0.4
+sso_gklift=0.1
+
+          # Random gravity waves
+          #Activitate the stochastic parameterization of convective GWs
+          # (should be equal to ok_strato)
+ok_gwd_rando=y
+
+          # Scale the momentum fluxes due to convective GWs
+gwd_rando_ruwmax=0.5
+
+          #Scale the saturated momentum flux of  convective GWs 
+gwd_rando_sat=0.6
+
+          # Important pour controler la periode de la QBO
+gwd_front_ruwmax=3
+
+
+###############################################################
+# Rayonnement
+###############################################################
+          # activation du nouveau code de rayonnement RRTM
+          # 0 : Ancien code et 1 : RRTM (D=0)
+iflag_rrtm=1
+
+          # Nombre de bandes pour le SW. Mettre 2 si iflag_rrtm=0
+NSW=6
+
+    # Albedo et inertie des calottes
+alb_vis_sno_lic=0.96
+alb_nir_sno_lic=0.68
+    # Controle de l'inertie des glaciers et banquises
+    # inertie_sno : pour la neige (y compris sur les points "ter"
+    #      quand orchidee n'est pas actif utilisÃ©)
+    # inertie_lic/sic : pour les "land ice" et "sea ice"
+inertie_sno=350
+    # iflag_sic=1 pour forcer Ã  garder l'inertie des "sea ice"
+    # a inertie_sic meme si la surface est couverte de neige
+iflag_sic=1
+inertie_lic=2000
+inertie_sic=2000
+    # tau_gl = constante de rappel de la temperature a la surface de la glace (en nombre de jours)
+    #     # Utilise celon le forcage : tau_gl=2 pour Amip et tau_gl=1 pour Hadisst2
+tau_gl= _AUTO_ : DEFAULT = 5.
+
+          # ???
+iflag_albedo=1
+
+          # Frequence appel rayonnement. Nombre appels par jour
+nbapp_cv=48
+
+          # Pour pouvoir revenir a un bug purement informatique de duplication
+          # des constantes thermodynamiques entre LMDZ et RRTM
+          # n : FORTEMENT CONSEILLE
+ok_bad_ecmwf_thermo=n
+
+###############################################################
+# Parametres nuages
+###############################################################
+
+          #seuils de la precipitation des nuages strateformes (D: 2.6e-4 2.6e-4)
+cld_lc_lsc=0.00065
+cld_lc_con=0.00065
+
+          #constante de temps pour eleminer eau lsc et convective
+          # (D: 3600. 3600.)
+cld_tau_lsc=900
+cld_tau_con=900
+
+          #facteurs correctifs sur la vitesse de chute des cristaux de glace (D: 1 1)
+ffallv_lsc=0.8
+ffallv_con=0.8
+
+          # coefficient sur la reevaporation de la pluie (D: 2.e-5 n)
+          # regle a 3.e-5 sur des cas de cumulus en 1D
+coef_eva=0.0001
+
+          # flag pour la reevaporation de la pluie
+          # 0: rien
+          # 1: a l ancienne
+          # 2: prend en compte la surface nuageuse max au dessus pour calculer
+          #    le max de reevaporation, comme ecart a la saturation. CONSEILLE
+iflag_evap_prec=2
+
+          # Modification de la plage de temperature pour la phase mixte
+          # liquide/glace des nuages
+          # Controle par les t_glace_min/max, exposant_glace,
+          # iflag_t_glace (D=0)
+t_glace_min=243.15
+t_glace_max=273.15
+exposant_glace=0.5
+iflag_t_glace=3
+
+          # Activation de la thermodynamique de la glace
+iflag_ice_thermo=1
+
+          # normalement elle ne sert plus a rien dans fisrtilp
+          # sinon elle est un peu toxique:
+          # IF (zt(i) .LT. t_coup.and.reevap_ice) zrfln(i)=0. (Jean-Baptiste)
+reevap_ice=n
+
+          #Bergeron
+iflag_bergeron=2
+
+          # temperature dependency of qsat for iterative procedure
+          # temporary flag to switch between the old (CMIP5, D=0)
+          # and new versions (=1) versions 
+iflag_fisrtilp_qsat=4
+
+          #calcul des proprietes des nuages convectifs (D:1 0.375 1.e-4) 
+iflag_cld_th=6
+fact_cldcon=1
+
+          # ?????
+facttemps=0
+
+          #calcul eau condensee et fraction nuageuse a partir des PDF
+          # (D:0, 0:version avec ratqs sinon nouvelles PDFs)  
+iflag_pdf=1
+
+          #calcul epaisseur optique et emmissivite des nuages (D: y 1 0.01 0.3)
+ok_newmicro=y
+
+          # Controle des ratqs grande echelle
+iflag_ratqs=4
+ratqsp0=45000
+ratqsdp=10000
+ratqsbas=0.002
+ratqshaut=0.4
+
+          #rayon effectif pour les nuages de glace (D:35)
+rad_froid=35
+
+          # Rayons effectif des gouttes nuageuses
+          # ACTIF SI ok_cdnc=0 dans config.def. (D~9 a 12 microns)
+rad_chau1=12
+rad_chau2=11
+
+	  # Rayon effectif des gouttes si ok_cdnc=0
+          # Parameters in CDNC-maer link (Boucher&Lohmann 1995)
+bl95_b0=1.3
+bl95_b1=0.2
+
+          #  Choix ou non  de  New oliq               
+new_oliq=y
+
+          # Seuils oliqmax, oicemax (en g/kg).
+          # Au dela on precipite directement au sol
+oliqmax=0.0015
+oicemax=0.0015
+
+          #Rayons min et max effectifs des particules des nuages
+rei_min=16
+rei_max=61.29
+
+          # Distribution vetricale sous maille pour le schema de de nuages.
+          # 0: rien
+          # 1: Premiere version A. Jam,
+          # 2 : J. Jouhaud, parametre cloudth_vert_alpha D=0.5
+          # 3 : J. Jouhaud, parametre cloudth_vert_alpha D=0.5/C= 1.32
+          #                           cloudth_vert_alpha_th C=2:91
+iflag_cloudth_vert=3
+cloudth_vert_alpha=0.5
+cloudth_vert_alpha_th=0.5
+
+
+######################################################################
+# Convection 
+######################################################################
+
+          #Convection scheme switch
+          # (D:2, 1:LMD, 2:Tiedtke, 3:KE New Physics, 30:KE AR4)
+iflag_con=3
+
+          #output level of energy conservation diagnostics
+if_ebil=0
+
+          #maximum efficiency of cld water->precipitation conversion (D: 0.993)
+epmax=0.999
+
+          #dry convective adjustment at beginning of Emanuel convective scheme (D: n 0)
+ok_adj_ema=n
+iflag_clw=0
+
+          #Convective closure (D:1, 0:AR4, 2:ALE and ALP)
+iflag_clos=2
+
+          #Convective entrainment mixing law (D:1, 0:AR4=flat PDF, 1=PDF)
+iflag_mix=1
+
+          #weights of the bell shaped and flat PDF (used only if iflag_mix=1) (D: 1 0)
+qqa1=1
+qqa2=0
+
+          #Parameters of the bell shaped PDF; Fmax=center (D= 0.65), Gammas=width (D=0.05)
+cvl_corr=1
+
+          #Multiplicative factor of Emanuel convective scheme precipitation (D: 1.)
+Fmax=0.65
+
+          #altitude, in hPa, above LCL at which buoybase is computed,
+          # def = original: -40
+dpbase=-40
+
+          #reference fractional area of precipitating downdraughts,
+          # def = original: 0.01
+sigdz=0.003
+
+          #unsaturated fraction of precipitating downdraughts, def = original: 0.15
+spfac=0.15
+
+          #relaxation time of cloud base mass flux, def = original: 8000
+tau=8000
+
+          #flag for wb (= vert velocity at LFC);
+          # 0->wb=wbmax, 1->wb=f(plfc) bounded, 2->wb=f(plfc) linear, D=1
+          # Si iflag_wb>=10 : wbeff_min=iflag_wb*0.1
+          # wbmax : assymptotic value 
+flag_wb=50
+wbmax=2.8
+
+          # Divers tests
+ok_convstop=n
+tau_stop=15000
+ok_intermittent=n
+
+          # nouvel epluchage de C.Rio
+          #shedding coefficient (used when iflag_mix_adiab=1)
+iflag_mix_adiab=0
+coef_peel=0.25
+
+          #Conversion cld water->precip: Ep=f(pressure) if 0; Ep=f(temperature)
+          #if 1, def=1
+flag_epKEorig=1
+
+          # Case : flag_epKEorig=1
+          # elcrit : max condensed water concentration in kg/kg, D=0.0003,
+          # tlcrit : temperature in degre Celsius, at which Ep=Epmax, D=-55. (original)
+          # original: 0.0011, used only if flag_epKEorig=1
+elcrit=0.0003
+tlcrit=-55
+
+          # Case : flag_epKEorig=0
+          # pbcrit : pressure (hPa), above LCL below which Ep=0, D=150 (original)
+          # ptcrit : pressure (hPa), above LCL above which Ep=Epmax, D=500 (original)
+pbcrit=150
+ptcrit=500
+
+          # Prevent some crashes
+          # Filter out bad wakes
+flag_wk_check_trgl=n
+iflag_wk_check_trgl=2
+iflag_alp_wk_cond=1
+
+
+          # Check whether parcel level temperature and specific humidity
+          # are reasonable and demand that LCL be high enough
+cv_flag_feed=2
+
+          # save 20% CPU 
+ok_optim_yield=y
+
+          # Convective clouds
+iflag_cld_cv=0
+
+          # To get back to bug where convective output variables
+          # were set to 0 at the start of the physics
+ok_bug_cv_trac=_AUTO_: DEFAULT = n
+
+##########################################################
+# Fermeture convective et couplages
+##########################################################
+
+          # Appel separe des thermiques 
+iflag_pbl_split=10
+
+          #rendement sur la puissance fournie par les thermiques a la convection
+alp_bl_k=0.5
+
+          #Constant value to be added to Alp (D: 0.)
+alp_offset=0
+
+          #Convection must reach a level at which T<t_top_max to be active
+t_top_max=1000
+
+          ### nrlmd le 10/04/2012: Declenchement ###
+          #Declenchement par couche-limite (0: deterministe, 1: stochastique)
+iflag_trig_bl=1
+
+          #Surface critique au LCL
+s_trig=12000000
+
+          #Temps de decorrelation entre scenes de cumulus
+tau_trig_shallow=1200
+
+          #Temps de decorrelation entre scenes de cumulonimbus
+tau_trig_deep=1200
+
+          # Pour la stabilisation
+random_notrig_max=0.99
+
+          # Temperature a la quelle on fond les descentes glacees
+tmax_fonte_cv=278.15
+
+          #Fermeture par couche-limite (Nicolas Rochetin)
+          #(0: deterministe, 1: statistique, 2: statistique+convergence
+          # grande echelle)
+iflag_clos_bl=1
+
+          #coefficient in Wape->C_star formula: C_star=stark*sqrt(2*Wape),
+          # def: 0.33
+stark=0.33
+
+          #lifting efficiency of wakes; Alp=Alpk*Fip, Fip=power provided
+          # by wakes, def: 0.25
+alpk=0.25
+
+#
+##########################################################
+# Couche limite convective / modele du thermique
+##########################################################
+
+          # Convection seche (D:0, 0:ajustement sec,=>1:modele du thermique) 
+iflag_thermals=18
+
+          # pas de temps du spliting pour les thermiques
+          # TOURNE MAIS POSE PLUS DE PROBLEME QU ELLE N EN RESOUD
+nsplit_thermals=1
+
+          # tau_thermals pour avoir une constante de temps sur les thermiques.
+          # Non valide
+tau_thermals=0
+
+          # Flag controlant le detrainement et l entrainement
+iflag_thermals_ed=8
+
+          # On va chercher l air a z * ( 1+fact_thermals_ed_dz) pour calculer
+          # le detrainement (A. Jam)
+fact_thermals_ed_dz=0.07
+
+          # Une option de plus sur les thermiques.
+iflag_thermals_optflux=0
+
+          #couplage ou non avec la convection
+iflag_coupl=5
+
+          # Seuil pour desactiver les thermiques en cas de forte inversion
+          # en sommet de couche limite. Actif si iflag_thermals impair.
+seuil_inversion=-0.08
+
+          # Reactivation du calcul d un zmax continu pour les thermiques
+          # reactivation d une fermeture humide des thermiques
+          # iflag_thermals_closure=2 (D=1)
+iflag_thermals_closure=2
+
+
+##########################################################
+# Flags wakes
+##########################################################
+
+          #Wake scheme switch (D:0, 0:AR4, 1:New Physics)
+iflag_wake=1
+
+          #multiplicative factor of the damping by gravity waves, def: 4.
+coefgw=4
+
+          #wake density = number of wake centers per m2, def: 8.E-12
+          #wdens_ref=8.E-12
+wdens_ref_o=1e-09
+wdens_ref_l=8e-12
+
+          # Ajustement convectif prealable au calcul des poches
+ok_adjwk=y
+
+
+####################################################################
+#  Conservation 
+####################################################################
+          # The source terms of the TKE prognostic equation are diagnosed
+# from tendencies (du, dv, dT) 
+          # associated with subrgrid scaleamotions and treated as an 
+          # additional heat source.
+          # Controled by a key, iflag_ener_conserv (D=-1):
+          # 0 : no conservation, -1 : old adhoc correction for kinetic E only
+          # (used for CMIP5) 
+          # 1 : conservation, 101 : conversion from kinetic to heat only,
+          # 110 conversion from potential to heat only
+iflag_ener_conserv=10
+
+          #Activation of corrections for water conservation (D: n). 
+          ##The default is n for compatibility with earlier versions.
+          ##generally it should be y.
+ok_conserv_q=y
+
+fl_cor_ebil=1
+
+####################################################################
+# Ozone
+####################################################################
+          # new treatment for ozone into the tropopause
+adjust_tropopause=y
+
+####################################################################
+#  Conservation de l'eau
+#####################################################################
+          # conservation de l eau sur les calottes
+ok_lic_cond=y
+####################################################################
+
+cdnc_min=10.
+          #min cloud droplet number concentration 
+ok_bug_split_th=n
+          # correct a bug in thermal splitting
+keepbug_ice_frac=n
+          # correct convection bug
+
+####################################################################
+####  StratAer
+####################################################################
+convscav=n  # Emmanuel convective scavenging
+lessivage=n # large scale  scavinging
+iflag_lscav=4
+ccntrAA=1.
+ccntrENV=1.
+coefcoli=0.001
+ok_qch4=n # methan oxydation
+####################################################################
+##  Injection
+####################################################################
+# Nucleation rate in lat/pres box
+flag_nuc_rate_box=n         # Nucleation rate limit or not to a lat/pres
+nuclat_min=-15.0            # min lat to activate nuc rate (degN)
+nuclat_max=15.0             # max lat to activate nuc rate (degN)
+nucpres_min=8000.0          # min pres to activate nuc rate (Pa)
+nucpres_max=11000.0         # max pres to activate nuc rate (Pa)
+# Aerosol radiative feedback (0: off, 1: on)
+flag_aer_feedback = y
+# flag for sulfur emission scenario: (0) background aer ; (1) volcanic eruption ; (2) strato aer injections (SAI)
+flag_sulf_emit = 2
+# Duree de l'injection (en jours)
+injdur = 365
+# Flag either Gaussian distribution (0) or uniform distribution (1)
+flag_sulf_emit_distrib = 0
+#--flag_sulf_emit=1 --example Pinatubo
+nErupt=1                     # eruption nb during simulation
+year_emit_vol=1995           # year of emission date
+mth_emit_vol=1               # month of emission date
+day_emit_vol=1               # day of emission date
+m_aer_emiss_vol=10.0e9       # emitted sulfur mass in kgS, e.g. 7Tg(S)=14Tg(SO2)
+altemiss_vol=18.e3           # emission altitude in m
+sigma_alt_vol=0.5e3          # standard deviation of emission altitude in m
+xlat_min_vol=-15.0           # min latitude of volcano in degree
+xlat_max_vol=-15.0           # max latitude of volcano in degree
+xlon_min_vol=0.0             # min longitude of volcano in degree
+xlon_max_vol=0.0             # max longitude of volcano in degree
+#--flag_sulf_emit=2
+m_aer_emiss_sai=10.0e9       # emitted sulfur mass in kgS, eg 1e9=1TgS, 1e10=10TgS
+altemiss_sai=18.e3           # emission altitude in m
+sigma_alt_sai=0.5e3          # standard deviation of emission altitude in m
+xlat_sai=15.0                # latitude of SAI in degree
+xlon_sai=0.0                 # longitude of SAI in degree
+year_emit_sai_start=1995     # starting date for SAI
+mth_emit_sai_start=1
+day_emit_sai_start=15
+year_emit_sai_end=1995       # end date for SAI (date included in period)
+mth_emit_sai_end=2
+day_emit_sai_end=10
Index: /CONFIG/UNIFORM/v6/IPSLCM6.3/GENERAL/PARAM/ping_nemo-ocean.xml
===================================================================
--- /CONFIG/UNIFORM/v6/IPSLCM6.3/GENERAL/PARAM/ping_nemo-ocean.xml	(revision 6531)
+++ /CONFIG/UNIFORM/v6/IPSLCM6.3/GENERAL/PARAM/ping_nemo-ocean.xml	(revision 6531)
@@ -0,0 +1,296 @@
+<!-- Ping files generated by dr2xml 1.13 using Data Request 01.00.27 -->
+<!-- lrealms= ['ocean'] -->
+<!-- exact= False -->
+<!--  listof_home_vars : None
+ tierMax : 3
+ realms_per_context : {'lmdz': ['atmos', 'atmos land'], 'nemo': ['seaIce', 'ocean', 'ocean seaIce', 'ocnBgchem', 'seaIce ocean'], 'orchidee': ['land', 'landIce land', 'land landIce', 'landIce']}
+ max_priority : 3
+ max_file_size_in_floats : 20000000000.0
+ grid_choice : {'IPSL-CM6A-LR': 'LR'}
+ excluded_vars_file : None
+ sizes : {'LR': [20592, 79, 32768, 91, 30, 14, 128]}
+ ping_variables_prefix : CMIP6_
+ source_types : {'IPSL-CM6A-LR': 'AOGCM AER BGC'}
+ path_extra_tables : None
+ grid_policy : native
+ path_special_defs : None
+ mips : {'LR': set(['CORDEX', 'GMMIP', 'RFMIP', 'VolMIP', 'CMIP6', 'ScenarioMIP', 'GeoMIP', 'C4MIP', 'PDRMIP', 'CMIP', 'DECK', 'LUMIP', 'CMIP5', 'CFMIP', 'OMIP', 'DAMIP', 'CCMI', 'SolarMIP', 'VIACSAB', 'SIMIP', 'DCPP', 'ISMIP6', 'AerChemMIP', 'PMIP', 'FAFMIP', 'DynVar', 'LS3MIP', 'SPECS', 'HighResMIP'])}
+excluded_vars : []
+ orphan_variables : {}
+ --> 
+<context id="nemo">
+<field_definition>
+<field_group freq_op="_reset_" freq_offset="_reset_">
+<!-- for variables which realm equals one of _ocean-->
+   <field id="CMIP6_areacello"     field_ref="areacello"        /> <!-- P1 (m2) cell_area : Cell areas for any grid used to report ocean variables and variables which are requested as used on the model ocean grid (e.g. hfsso, which is a downward heat flux from the atmosphere interpolated onto the ocean grid). These cell areas should be defined to enable exact calculation of global integrals (e.g., of vertical fluxes of energy at the surface and top of the atmosphere). -->
+   <field id="CMIP6_basin"         field_ref="basins"           /> <!-- P1 (1) region : A variable with the standard name of region contains strings which indicate geographical regions. These strings must be chosen from the standard region list. -->
+   <field id="CMIP6_bigthetao"     field_ref="toce" expr="@toce_e3t / @e3t" > toce_e3t / e3t </field> <!-- P1 (degC) sea_water_conservative_temperature : Diagnostic should be contributed only for models using conservative temperature as prognostic field. --> 
+   <field id="CMIP6_bigthetaoga"   field_ref="sctemtot"         /> <!-- P1 (degC) sea_water_conservative_temperature : Diagnostic should be contributed only for models using conservative temperature as prognostic field. -->
+   <field id="CMIP6_deptho"        field_ref="bathy"          /> <!-- P1 (m) sea_floor_depth_below_geoid : Ocean bathymetry.   Reported here is the sea floor depth for present day relative to z=0 geoid. Reported as missing for land grid cells. -->  
+   <field id="CMIP6_difmxybo"  field_ref="dummy_XYO"        /> <!-- P2 (m4 s-1) ocean_momentum_xy_biharmonic_diffusivity : Lateral biharmonic viscosity applied to the momentum equations. -->
+   <field id="CMIP6_difmxybo2d"    field_ref="dummy_XYO"        /> <!-- P3 (m4 s-1) ocean_momentum_xy_biharmonic_diffusivity : Lateral biharmonic viscosity applied to the momentum equations. -->
+   <field id="CMIP6_difmxylo"  field_ref="dummy_XYO"        /> <!-- P2 (m2 s-1) ocean_momentum_xy_laplacian_diffusivity : Lateral Laplacian viscosity applied to the momentum equations. -->
+   <field id="CMIP6_difmxylo2d"    field_ref="dummy_XYO"        /> <!-- P3 (m2 s-1) ocean_momentum_xy_laplacian_diffusivity : Lateral Laplacian viscosity applied to the momentum equations. -->
+   <field id="CMIP6_diftrbbo"      field_ref="dummy_XYO"        /> <!-- P3 (m4 s-1) ocean_tracer_bolus_biharmonic_diffusivity : unset -->
+   <field id="CMIP6_diftrbbo2d"    field_ref="dummy_XYO"        /> <!-- P3 (m4 s-1) ocean_tracer_bolus_biharmonic_diffusivity : unset -->
+   <field id="CMIP6_diftrblo"      field_ref="dummy_XYO"        /> <!-- P1 (m2 s-1) ocean_tracer_bolus_laplacian_diffusivity : Ocean tracer diffusivity associated with parameterized eddy-induced advective transport. Sometimes this diffusivity is called the 'thickness' diffusivity. For CMIP5, this diagnostic was called 'ocean tracer bolus laplacian diffusivity'.  The CMIP6 name is physically more relevant. -->
+   <field id="CMIP6_diftrblo2d"    field_ref="aht2d_eiv"        /> <!-- P3 (m2 s-1) ocean_tracer_bolus_laplacian_diffusivity : Ocean tracer diffusivity associated with parameterized eddy-induced advective transport. Sometimes this diffusivity is called the 'thickness' diffusivity. For CMIP5, this diagnostic was called 'ocean tracer bolus laplacian diffusivity'.  The CMIP6 name is physically more relevant. -->
+   <field id="CMIP6_diftrebo"      field_ref="dummy_XYO"        /> <!-- P3 (m4 s-1) ocean_tracer_epineutral_biharmonic_diffusivity : unset -->
+   <field id="CMIP6_diftrebo2d"    field_ref="dummy_XYO"        /> <!-- P3 (m4 s-1) ocean_tracer_epineutral_biharmonic_diffusivity : unset -->
+   <field id="CMIP6_diftrelo"      field_ref="dummy_XYO"        /> <!-- P1 (m2 s-1) ocean_tracer_epineutral_laplacian_diffusivity : Ocean tracer diffusivity associated with parameterized eddy-induced diffusive transport oriented along neutral or isopycnal directions. Sometimes this diffusivity is called the neutral diffusivity or isopycnal diffusivity or Redi diffusivity. -->
+   <field id="CMIP6_diftrelo2d"    field_ref="aht2d_eiv"        /> <!-- P3 (m2 s-1) ocean_tracer_epineutral_laplacian_diffusivity : Ocean tracer diffusivity associated with parameterized eddy-induced diffusive transport oriented along neutral or isopycnal directions. Sometimes this diffusivity is called the neutral diffusivity or isopycnal diffusivity or Redi diffusivity. -->
+   <field id="CMIP6_diftrxybo"     field_ref="dummy_XYO"        /> <!-- P3 (m4 s-1) ocean_tracer_xy_biharmonic_diffusivity : unset -->
+   <field id="CMIP6_diftrxybo2d"   field_ref="dummy_XYO"        /> <!-- P3 (m4 s-1) ocean_tracer_xy_biharmonic_diffusivity : unset -->
+   <field id="CMIP6_diftrxylo"     field_ref="dummy_XYO"        /> <!-- P3 (m2 s-1) ocean_tracer_xy_laplacian_diffusivity : unset -->
+   <field id="CMIP6_diftrxylo2d"   field_ref="aht2d"            /> <!-- P3 (m2 s-1) ocean_tracer_xy_laplacian_diffusivity : unset -->
+   <field id="CMIP6_difvho"        field_ref="avt_e3w"  expr="@avt_e3w / @e3w" > avt_e3w / e3w </field> <!-- P1 (m2 s-1) ocean_vertical_heat_diffusivity : Vertical/dianeutral diffusivity applied to prognostic temperature field. -->
+   <field id="NEMO_difvho_noevd"   field_ref="avt_e3w"  expr="(@avt_e3w - @avt_evd_e3w) / @e3w" > ( avt_e3w - avt_evd_e3w) / e3w </field> <!-- P3 (m2 s-1) ocean vertical heat diffusivity without evd contribution ****  NEMO-RD : extra variable not required by CMIP6 -->
+   <field id="CMIP6_difvmbo"       field_ref="dummy_XY0"             /> <!-- P1 (m2 s-1) ocean_vertical_momentum_diffusivity_due_to_background : unset **** NEMO-RD not relevant for IPSLCM6 because we use zdftmx_new (background included in av_tide) -->
+   <field id="CMIP6_difvmfdo"      field_ref="dummy_XYO"        /> <!-- P1 (m2 s-1) ocean_vertical_momentum_diffusivity_due_to_form_drag : unset **** NEMO-RD not relevant for IPSL CM6--> 
+   <field id="CMIP6_difvmo"        field_ref="avm_e3w"  expr="@avm_e3w / @e3w" > avm_e3w / e3w </field> <!-- P1 (m2 s-1) ocean_vertical_momentum_diffusivity : unset -->
+   <field id="CMIP6_difvmto"       field_ref="av_wave_e3w"  expr="@av_wave_e3w / @e3w" > av_wave_e3w / e3w </field> <!-- P1 (m2 s-1) ocean_vertical_momentum_diffusivity_due_to_tides : unset --> 
+   <field id="CMIP6_difvso"        field_ref="avs_e3w"  expr="@avs_e3w / @e3w" > avs_e3w / e3w * $Sgtokg </field> <!-- P1 (m2 s-1) ocean_vertical_salt_diffusivity : Vertical/dianeutral diffusivity applied to prognostic salinity field. -->
+   <field id="NEMO_difvso_noevd"   field_ref="avs_e3w"  expr="(@avs_e3w - @avt_evd_e3w) / @e3w" > ( avs_e3w - avt_evd_e3w)  / e3w </field>  <!-- P3 (m2 s-1) ocean vertical heat diffusivity without evd contribution ****  NEMO-RD : extra variable not required by CMIP6 -->
+   <field id="CMIP6_difvtrbo"      field_ref="dummy_XYO"             /> <!-- P1 (m2 s-1) ocean_vertical_tracer_diffusivity_due_to_background : unset *** NEMO-RD : not relevant for IPSLCM6 -->
+   <field id="CMIP6_difvtrto"      field_ref="av_wave_e3w" expr="@av_wave_e3w / @e3w" > av_wave_e3w / e3w </field> <!-- P1 (m2 s-1) ocean_vertical_tracer_diffusivity_due_to_tides : unset -->
+   <field id="CMIP6_dispkevfo"     field_ref="dispkevfo"   /> <!-- P1 (W m-2) ocean_kinetic_energy_dissipation_per_unit_area_due_to_vertical_friction. *** NEMO-RD : provides 2D (vertical integral) while not requested by CMIP6 (Griffies et al. 2016) while CMIP5 requested 3D field -->
+   <field id="CMIP6_dispkexyfo"    field_ref="dummy_XY0"        /> <!-- P3 (W m-2) ocean_kinetic_energy_dissipation_per_unit_area_due_to_xy_friction : Depth integrated impacts on kinetic energy arising from lateral frictional dissipation associated with Laplacian and/or biharmonic viscosity. For CMIP5, this diagnostic was 3d, whereas the CMIP6 depth integrated diagnostic is sufficient for many purposes and reduces archive requirements. -->
+   <field id="CMIP6_dispkexyfo2d"  field_ref="dispkexyfo"        /> <!-- P3 (W m-2) ocean_kinetic_energy_dissipation_per_unit_area_due_to_xy_friction : Depth integrated impacts on kinetic energy arising from lateral frictional dissipation associated with Laplacian and/or biharmonic viscosity. For CMIP5, this diagnostic was 3d, whereas the CMIP6 depth integrated diagnostic is sufficient for many purposes and reduces archive requirements. -->
+   <field id="CMIP6_evs"           field_ref="evap_ao_cea"    /> <!-- P1 (kg m-2 s-1) water_evaporation_flux : computed as the total mass of water vapor evaporating from the ice-free portion of the ocean  divided by the area of the ocean portion of the grid cell.  -->
+   <field id="CMIP6_ficeberg"      field_ref="dummy_XYO"         /> <!-- P1 (kg m-2 s-1) water_flux_into_sea_water_from_icebergs : computed as the iceberg melt water  flux into the ocean divided by the area of the ocean portion of the grid cell. *** NEMO-RD : does not do (output of vertical profile to be coded) -->
+   <field id="CMIP6_ficeberg2d"    field_ref="iceberg_cea"         /> <!-- P1 (kg m-2 s-1) water_flux_into_sea_water_from_icebergs : computed as the iceberg melt water  flux into the ocean divided by the area of the ocean portion of the grid cell. **** NEMO-RD : TODO some work needed for forced mode to read iceberg contribution independently from river runoffs --> 
+   <field id="CMIP6_flandice"      field_ref="iceshelf_cea"        /> <!-- P1 (kg m-2 s-1) water_flux_into_sea_water_from_land_ice : Computed as the water flux into the ocean due to land ice (runoff water from surface and base of land ice or melt from base of ice shelf or vertical ice front) into the ocean divided by the area ocean portion of the grid cell --> 
+   <field id="CMIP6_friver"        field_ref="runoffs"> this - iceberg_cea </field><!-- P1 (kg m-2 s-1) water_flux_into_sea_water_from_rivers : computed as the river flux of water into the ocean divided by the area of the ocean portion of the grid cell.  -->
+   <field id="CMIP6_fsitherm"      field_ref="fmmflx"            /> <!-- P1 (kg m-2 s-1) water_flux_into_sea_water_due_to_sea_ice_thermodynamics : computed as the sea ice thermodynamic water flux into the ocean divided by the area of the ocean portion of the grid cell. **** Duplication with SIMIP (siflfwbot + sndmassmelt)  but mail to Dirk Notz and Martin Jukes suggest to keep as it is. NEMO-RD : a more appropriate definition is : total freswhater flux into ocean due to sea ice and associated snow cover. -->
+   <field id="CMIP6_hcont300"      field_ref="hc300"            /> <!-- P1 (m K) hcont300 : Used in PMIP2 -->
+   <field id="CMIP6_hfbasin"       field_ref="sopht_vt_3bsn"> this * 1e15 </field> <!-- P1 (W) northward_ocean_heat_transport : Contains contributions from all physical processes affecting the northward heat transport, including resolved advection, parameterized advection, lateral diffusion, etc. Diagnosed here as a function of latitude and basin.   Use Celsius for temperature scale. --> 
+   <field id="CMIP6_hfbasinpadv"   field_ref="dummy_basin_zonal_mean"/> <!-- P1 (W) hfbasinpadv : Contributions to heat transport from parameterized eddy-induced advective transport due to any subgrid advective process. Diagnosed here as a function of latitude and basin.  Use Celsius for temperature scale.  --> 
+   <field id="CMIP6_hfbasinpmadv"  field_ref="sophteiv_3bsn"> this * 1e15 </field> <!-- P1 (W) hfbasinpmadv : Contributions to heat transport from parameterized mesoscale eddy-induced advective transport. Diagnosed here as a function of latitude and basin.  Use Celsius for temperature scale. NEMO-RD: same as previous line in our case: only GM  --> 
+   <field id="CMIP6_hfbasinpmdiff" field_ref="dummy_basin_zonal_mean"/> <!-- P1 (W) hfbasinpmdiff : Contributions to heat transport from parameterized mesoscale eddy-induced diffusive transport (i.e., neutral diffusion). Diagnosed here as a function of latitude and basin. **** NEMO-RD: not relevant for IPSLCM6 -->
+   <field id="CMIP6_hfbasinpsmadv" field_ref="dummy_basin_zonal_mean"/> <!-- P1 (W) hfbasinpsmadv : Contributions to heat transport from parameterized SUB!!mesoscale eddy-induced advective transport. Diagnosed here as a function of latitude and basin.  Use Celsius for temperature scale. **** NEMO-RD: not relevant for IPSLCM6-->
+   <field id="CMIP6_hfcorr"        field_ref="qrp"         /> <!-- P0 (W m-2) heat_flux_correction : Heat Flux Correction **** NEMO-RD: not relevant for IPSLCM6 -->
+   <field id="CMIP6_hfds"          field_ref="qt"     > qt - qrp </field><!-- P1 (W m-2) surface_downward_heat_flux_in_sea_water : This is the net flux of heat entering the liquid water column through its upper surface (excluding any "flux adjustment") . -->
+   <field id="CMIP6_hfevapds"      field_ref="hflx_evap_cea"    /> <!-- P1 (W m-2) temperature_flux_due_to_evaporation_expressed_as_heat_flux_out_of_sea_water : This is defined as "where ice_free_sea over sea" -->
+   <field id="CMIP6_hfgeou"        field_ref="hfgeou"         /> <!-- P1 (W m-2) upward_geothermal_heat_flux_at_sea_floor : Upward Geothermal Heat Flux at Sea Floor -->
+   <field id="CMIP6_hfibthermds"   field_ref="dummy_XYO"        /> <!-- P1 (W m-2) heat_flux_into_sea_water_due_to_iceberg_thermodynamics : Heat Flux into Sea Water due to Iceberg Thermodynamics **** NEMO-RD not relevant for IPSL CM6--> 
+   <field id="CMIP6_hfibthermds2d" field_ref="hflx_icb_cea"     /> <!-- P1 (W m-2) heat_flux_into_sea_water_due_to_iceberg_thermodynamics : Heat Flux into Sea Water due to Iceberg Thermodynamics -->
+   <field id="CMIP6_hflso"         field_ref="dummy_XY"         /> <!-- P1 (W m-2) surface_downward_latent_heat_flux : This is defined as with the cell methods string: where ice_free_sea over sea **** NEMO-RD: does not provide -->
+   <field id="CMIP6_hfrainds"      field_ref="hflx_rain_cea"    /> <!-- P1 (W m-2) temperature_flux_due_to_rainfall_expressed_as_heat_flux_into_sea_water : This is defined as "where ice_free_sea over sea"; i.e., the total flux (considered here) entering the ice-free portion of the grid cell divided by the area of the ocean portion of the grid cell.  All such heat fluxes are computed based on Celsius scale.-->
+   <field id="CMIP6_hfrunoffds"    field_ref="dummy_XYO"        /> <!-- P2 (W m-2) temperature_flux_due_to_runoff_expressed_as_heat_flux_into_sea_water : Temperature Flux due to Runoff Expressed as Heat Flux into Sea Water **** NEMO-RD: the 3D version is not relevant for IPSLCM6. -->
+   <field id="CMIP6_hfrunoffds2d"  field_ref="hflx_rnf_cea"     /> <!-- P2 (W m-2) temperature_flux_due_to_runoff_expressed_as_heat_flux_into_sea_water : Temperature Flux due to Runoff Expressed as Heat Flux into Sea Water -->
+   <field id="CMIP6_hfsifrazil"    field_ref="dummy_XYO"        /> <!-- P1 (W m-2) heat_flux_into_sea_water_due_to_freezing_of_frazil_ice : Heat Flux into Sea Water due to Frazil Ice Formation **** NEMO-RD : not relevant for IPSLCM6 -->
+   <field id="CMIP6_hfsifrazil2d"  field_ref="dummy_XYO"        /> <!-- P1 (W m-2) heat_flux_into_sea_water_due_to_freezing_of_frazil_ice : Heat Flux into Sea Water due to Frazil Ice Formation **** NEMO-RD : not relevant for IPSLCM6 -->  
+   <field id="CMIP6_hfsnthermds"   field_ref="dummy_XYO"        /> <!-- P2 (W m-2) heat_flux_into_sea_water_due_to_snow_thermodynamics : Heat Flux into Sea Water due to Snow Thermodynamics **** NEMO-RD: the 3D version is not relevant for IPSLCM6-->
+   <field id="CMIP6_hfsnthermds2d" field_ref="hflx_snow_ao_cea" /> <!-- P2 (W m-2) heat_flux_into_sea_water_due_to_snow_thermodynamics : Heat Flux into Sea Water due to Snow Thermodynamics -->  
+   <field id="CMIP6_hfsso"         field_ref="dummy_XY"         /> <!-- P1 (W m-2) surface_downward_sensible_heat_flux : This is defined as "where ice_free_sea over sea" **** NEMO-RD: does not do --> 
+   <field id="CMIP6_hfx"           field_ref="uadv_heattr"> this + udiff_heattr </field><!-- P1 (W) ocean_heat_x_transport : Contains all contributions to "x-ward" heat transport from resolved and parameterized processes.  Use Celsius for temperature scale.  -->
+   <field id="CMIP6_hfy"           field_ref="vadv_heattr"> this + vdiff_heattr </field><!-- P1 (W) ocean_heat_y_transport : Contains all contributions to "y-ward" heat transport from resolved and parameterized processes. Use Celsius for temperature scale.  -->
+   <field id="CMIP6_htovgyre"      field_ref="sophtove_3bsn"> sopht_vt_3bsn * 1e15 - this * 1e15  </field> <!-- P1 (W) northward_ocean_heat_transport_due_to_gyre : From all advective mass transport processes, resolved and parameterized. -->
+   <field id="CMIP6_htovovrt"      field_ref="sophtove_3bsn"> this * 1e15  </field> <!-- P1 (W) northward_ocean_heat_transport_due_to_overturning : From all advective mass transport processes, resolved and parameterized. -->
+   <field id="CMIP6_masscello"     field_ref="masscello"        /> <!-- P1 (kg m-2) sea_water_mass_per_unit_area : Tracer grid-cell mass per unit area used for computing tracer budgets. For Boussinesq models with static ocean grid cell thickness, masscello = rhozero*thickcello, where thickcello is static cell thickness and rhozero is constant Boussinesq reference density. More generally, masscello is time dependent and reported as part of Omon.  -->
+   <field id="CMIP6_masso"         field_ref="scmastot"          /> <!-- P1 (kg) sea_water_mass : Total mass of liquid seawater. For Boussinesq models, report this diagnostic as Boussinesq reference density times total volume. -->
+   <field id="CMIP6_mfo"           field_ref="transport_masse_transect"         /> <!-- P1 (kg s-1) sea_water_transport_across_line : Sea Water Transport -->
+   <field id="CMIP6_mlotst"        field_ref="mldr10_3"         /> <!-- P2 (m) ocean_mixed_layer_thickness_defined_by_sigma_t : Sigma T is potential density referenced to ocean surface. -->
+   <field id="CMIP6_mlotstmax"     field_ref="mldr10_3max"      /> <!-- P1 (m) ocean_mixed_layer_thickness_defined_by_sigma_t : Sigma T is potential density referenced to ocean surface. -->
+   <field id="CMIP6_mlotstmin"     field_ref="mldr10_3min"      /> <!-- P1 (m) ocean_mixed_layer_thickness_defined_by_sigma_t : Sigma T is potential density referenced to ocean surface. -->
+   <field id="CMIP6_mlotstsq"      field_ref="mldr10_3" > this * this </field> <!-- P1 (m2) square_of_ocean_mixed_layer_thickness_defined_by_sigma_t : Square of Ocean Mixed Layer Thickness Defined by Sigma T -->
+   <field id="CMIP6_msftbarot"     field_ref="uoce_e3u_vsum_e2u" > this * $rau0 </field> <!-- P1 (kg s-1) ocean_barotropic_mass_streamfunction : Streamfunction or its approximation for free surface models. See OMDP document for details. -->
+   <field id="CMIP6_msftmrho"      field_ref="dummy_basin_merid_section_density"/> <!-- P1 (kg s-1) ocean_meridional_overturning_mass_streamfunction : Overturning mass streamfunction arising from all advective mass transport processes, resolved and parameterized. **** NEMO-RD does not do: no interpolation from y to meridional -->
+   <field id="CMIP6_msftmrhompa"   field_ref="dummy_basin_merid_section_density"/> <!-- P1 (kg s-1) msftmrhompa : CMIP5 called this "due to Bolus Advection".  Name change respects the more general physics of the mesoscale parameterizations. **** NEMO-RD does not do: no interpolation from y to meridional--> 
+   <field id="CMIP6_msftmz"       field_ref="dummy_basin_merid_section"        /> <!-- P1 (kg s-1) ocean_meridional_overturning_mass_streamfunction : Overturning mass streamfunction arising from all advective mass transport processes, resolved and parameterized. **** NEMO-RD does not do: no interpolation from y to meridional -->
+   <field id="CMIP6_msftmzmpa"     field_ref="dummy_basin_merid_section"        /> <!-- P1 (kg s-1) msftmzmpa : CMIP5 called this "due to Bolus Advection".  Name change respects the more general physics of the mesoscale parameterizations. **** NEMO-RD does not do: no interpolation from y to meridional--> 
+   <field id="CMIP6_msftmzsmpa"    field_ref="dummy_basin_merid_section"        /> <!-- P1 (kg s-1) msftmzsmpa : Report only if there is a submesoscale eddy parameterization. **** NEMO-RD: not relevant for IPSL CM6-->
+   <field id="CMIP6_msftyrho"      field_ref="dummy_basin_merid_section_density"/> <!-- P1 (kg s-1) ocean_y_overturning_mass_streamfunction : Overturning mass streamfunction arising from all advective mass transport processes, resolved and parameterized. **** NEMO-RD: msf on density space not coded online. Ongoing work to code offline. BUt a priori, not distributed here. --> 
+   <field id="CMIP6_msftyrhompa"   field_ref="dummy_basin_merid_section_density"/> <!-- P1 (kg s-1) msftyrhompa : CMIP5 called this "due to Bolus Advection".  Name change respects the more general physics of the mesoscale parameterizations. **** NEMO-RD: msf on density space not coded online. Ongoing work to code offline. BUt a priori, not distributed here.-->
+   <field id="CMIP6_msftyz"        field_ref="zomsf_3bsn" > this * 1e6 * $rau0 </field> <!-- P1 (kg s-1) ocean_y_overturning_mass_streamfunction : Overturning mass streamfunction arising from all advective mass transport processes, resolved and parameterized. --> 
+   <field id="CMIP6_msftyzmpa"     field_ref="dummy_basin_merid_section"        /> <!-- P1 (kg s-1) msftyzmpa : CMIP5 called this "due to Bolus Advection".  Name change respects the more general physics of the mesoscale parameterizations. **** NEMO-RD: Does not code --> 
+   <field id="CMIP6_msftyzsmpa"    field_ref="dummy_basin_merid_section"         /> <!-- P1 (kg s-1) msftyzsmpa : Report only if there is a submesoscale eddy parameterization. **** NEMO-RD: not relevant for IPSL CM6-->
+   <field id="CMIP6_obvfsq"        field_ref="bn2_e3t" expr="@bn2_e3t / @e3t" > bn2_e3t / e3t </field> <!-- P1 (s-2) obvfsq : Square of Brunt Vaisala Frequency in Sea Water -->
+   <field id="CMIP6_ocontempdiff"  field_ref="ttrd_zdfp_e3t" > this * $cpocean * $rau0 </field> <!-- P1 (W m-2) ocontempdiff : Tendency of heat content for a grid cell from parameterized dianeutral mixing. Reported only for models that use conservative temperature as prognostic field. -->
+   <field id="CMIP6_ocontempmint"  field_ref="dummy_XY"         /> <!-- P3 (degC kg m-2) ocontempmint : Full column sum of density*cell thickness*conservative temperature. If the model is Boussinesq, then use Boussinesq reference density for the density factor. NEMO-RD: exactly same as tomint hence we leave dummy_XY here -->
+   <field id="CMIP6_ocontemppadvect" field_ref="ttrd_eivad_e3t" > this * $cpocean * $rau0 </field> <!-- P1 (W m-2) ocontemppadvect : Tendency of heat content for a grid cell from parameterized eddy advection (any form of eddy advection). Reported only for models that use conservative temperature as prognostic field. -->
+   <field id="CMIP6_ocontemppmdiff" field_ref="ttrd_iso_e3t" > this * $cpocean * $rau0 </field>  <!-- P1 (W m-2) ocontemppmdiff : Tendency of heat content for a grid cell from parameterized mesoscale eddy diffusion. Reported only for models that use conservative temperature as prognostic field. -->
+   <field id="CMIP6_ocontemppsmadvect" field_ref="dummy_XYO"    /> <!-- P1 (W m-2) ocontemppsmadvect : Tendency of heat content for a grid cell from parameterized submesoscale eddy advection. Reported only for models that use conservative temperature as prognostic field. **** NEMO-RD not relevant for IPSL CM6-->
+   <field id="CMIP6_ocontemprmadvect" field_ref="ttrd_totad_e3t" > this * $cpocean * $rau0  </field> <!-- P1 (W m-2) ocontemprmadvect : Tendency of Sea Water Conservative Temperature Expressed as Heat Content due to Residual Mean Advection  -->
+   <field id="CMIP6_ocontemptend"  field_ref="ttrd_tot_e3t" > this * $cpocean * $rau0 </field> <!-- P1 (W m-2) ocontemptend : Tendency of heat content for a grid cell from all processes. Reported only for models that use conservative temperature as prognostic field.  -->
+   <field id="CMIP6_omldamax"      field_ref="mldkz5"           /> <!-- P1 (m) ocean_mixed_layer_thickness_defined_by_mixing_scheme : unset -->
+   <field id="CMIP6_opottempdiff"  field_ref="dummy_XYO"        /> <!-- P1 (W m-2) opottempdiff : Tendency of heat content for a grid cell from parameterized dianeutral mixing. Reported only for models that use potential temperature as prognostic field. **** NEMO-RD not relevant for IPSL CM6-->
+   <field id="CMIP6_opottempmint"  field_ref="dummy_XY"         /> <!-- P1 (degC kg m-2) opottempmint : __unset__ **** NEMO-RD : not relevant for IPSLCM6 -->
+   <field id="CMIP6_opottemppadvect" field_ref="dummy_XYO"      /> <!-- P1 (W m-2) opottemppadvect : Tendency of heat content for a grid cell from parameterized eddy advection (any form of eddy advection). Reported only for models that use potential temperature as prognostic field. **** NEMO-RD : not relevant for IPSLCM6 -->
+   <field id="CMIP6_opottemppmdiff" field_ref="dummy_XYO"       /> <!-- P1 (W m-2) opottemppmdiff : Tendency of heat content for a grid cell from parameterized mesoscale eddy diffusion. Reported only for models that use potential temperature as prognostic field. **** NEMO-RD not relevant for IPSL CM6 -->
+   <field id="CMIP6_opottemppsmadvect" field_ref="dummy_XYO"    /> <!-- P1 (W m-2) opottemppsmadvect : Tendency of heat content for a grid cell from parameterized submesoscale eddy advection. Reported only for models that use potential temperature as prognostic field. **** NEMO-RD not relevant for IPSL CM6 -->
+   <field id="CMIP6_opottemprmadvect" field_ref="dummy_XYO"     /> <!-- P1 (W m-2) opottemprmadvect : Tendency of Sea Eater Potential Temperature Expressed as Heat Content due to Residual Mean Advection **** NEMO-RD not relevant for IPSL CM6 -->
+   <field id="CMIP6_opottemptend"  field_ref="dummy_XYO"        /> <!-- P1 (W m-2) opottemptend : Tendency of heat content for a grid cell from all processes. Reported only for models that use potential temperature as prognostic field. **** NEMO-RD not relevant for IPSL CM6-->
+   <field id="CMIP6_osaltdiff"     field_ref="strd_zdfp_e3t"    > this * $rau0 * $Sgtokg </field> <!-- P1 (kg m-2 s-1) osaltdiff : Tendency of salt content for a grid cell from parameterized dianeutral mixing.-->
+   <field id="CMIP6_osaltpadvect"  field_ref="strd_eivad_e3t"  > this * $rau0 * $Sgtokg </field> <!-- P1 (kg m-2 s-1) osaltpadvect : Tendency of salt content for a grid cell from parameterized eddy advection (any form of eddy advection). -->
+   <field id="CMIP6_osaltpmdiff"   field_ref="strd_iso_e3t"  > this * $rau0 * $Sgtokg </field> <!-- P1 (kg m-2 s-1) osaltpmdiff : Tendency of salt content for a grid cell from parameterized mesoscale eddy diffusion. -->
+   <field id="CMIP6_osaltpsmadvect" field_ref="dummy_XYO"       /> <!-- P1 (kg m-2 s-1) osaltpsmadvect : Tendency of salt content for a grid cell from parameterized submesoscale eddy advection. **** NEMO-RD: not relevant for IPSL CM6--> 
+   <field id="CMIP6_osaltrmadvect" field_ref="strd_totad_e3t"  > this * $rau0 * $Sgtokg </field> <!-- P1 (kg m-2 s-1) osaltrmadvect : Tendency of Sea Water Salinity Expressed as Salt Content due to Residual Mean Advection -->
+   <field id="CMIP6_osalttend"     field_ref="strd_tot_e3t"  > this * $rau0 * $Sgtokg </field> <!-- P1 (kg m-2 s-1) osalttend : Tendency of salt content for a grid cell from all processes. -->
+   <field id="CMIP6_pabigthetao"   field_ref="dummy_XYO"        /> <!-- P1 (degC) pabigthetao : Sea Water Added Conservative Temperature **** NEMO-RD: ?? variable undefined in Griffies >> waiting for next DR -->
+   <field id="CMIP6_pathetao"      field_ref="dummy_XYO"        /> <!-- P1 (degC) pathetao : __unset__ **** NEMO-RD: ?? variable undefined in Griffies >> waiting for next DR -->
+   <field id="CMIP6_pbo"           field_ref="botpres"> this * 1e4     </field> <!-- P1 (Pa) sea_water_pressure_at_sea_floor : Sea Water Pressure at Sea floor  --> 
+   <field id="CMIP6_prbigthetao"   field_ref="dummy_XYO"        /> <!-- P1 (degC) prbigthetao : Sea Water Redistributed Conservative Temperature **** NEMO-RD: ?? variable undefined in Griffies >> waiting for next DR -->
+   <field id="CMIP6_prthetao"      field_ref="dummy_XYO"        /> <!-- P1 (degC) prthetao : __unset__ **** NEMO-RD: ?? variable undefined in Griffies >> waiting for next DR -->
+   <field id="CMIP6_prw18O"        field_ref="dummy_XYO"        /> <!-- P1 (kg m-2) mass_content_of_water_vapor_containing_18O_in_atmosphere_layer : Ratio of abundance of oxygen-18 (18O) atoms to oxgen-16 (16O) atoms in sea water -->
+   <field id="CMIP6_pso"           field_ref="dummy_XY"         /> <!-- P1 (Pa) sea_water_pressure_at_sea_water_surface : Sea Water Pressure at Sea Water Surface **** NEMO-RD: not relevant for IPSLCM6 -->
+   <field id="CMIP6_rlntds"        field_ref="dummy_XY"         /> <!-- P1 (W m-2) surface_net_downward_longwave_flux : This is defined as "where ice_free_sea over sea" **** NEMO-RD: does not do -->
+   <field id="CMIP6_rsdo"          field_ref="qsr3d_e3t_SBC" expr="@qsr3d_e3t_SBC / @e3t_SBC" > qsr3d_e3t_SBC / e3t_SBC </field>  <!-- P1 (W m-2) downwelling_shortwave_flux_in_sea_water : Downwelling Shortwave Radiation in Sea Water -->
+   <field id="CMIP6_rsdoabsorb"    field_ref="dummy_XYO"        /> <!-- P2 (W m-2) net_rate_of_absorption_of_shortwave_energy_in_ocean_layer : Net Rate of Absorption of Shortwave Energy in Ocean Layer **** NEMO-RD: does not do : easy to compute offline -->
+   <field id="CMIP6_rsntds"        field_ref="qsr"              /> <!-- P1 (W m-2) net_downward_shortwave_flux_at_sea_water_surface : This is the flux into the surface of liquid sea water only. This excludes shortwave flux absorbed by sea ice, but includes any light that passes through the ice and is absorbed by the ocean. -->
+   <field id="CMIP6_sfdsi"         field_ref="saltflx" > this * $convSpsu * $Sgtokg </field> <!-- P1 (kg m-2 s-1) downward_sea_ice_basal_salt_flux : This field is physical, and it arises since sea ice has a nonzero salt content, so it exchanges salt with the liquid ocean upon melting and freezing. -->
+   <field id="CMIP6_sfriver"       field_ref="dummy_XY"         /> <!-- P1 (kg m-2 s-1) salt_flux_into_sea_water_from_rivers : This field is physical, and it arises when rivers carry a nonzero salt content.  Often this is zero, with rivers assumed to be fresh. NEMO-RD : not relevant for IPSLCM6 -->
+   <field id="CMIP6_sftof"         field_ref="iceconc_pct" > 100 - this </field> <!-- P1 (%) sea_area_fraction : This is the area fraction at the ocean surface. **** NEMO-RD: variable already provided in ping_seaIce under name siconc - we decide to keep it here as well -->
+   <field id="CMIP6_sltbasin"      field_ref="sopst_vs_3bsn"> this * 1e6 * $convSpsu * $Sgtokg  </field> <!-- P1 (kg s-1) northward_ocean_salt_transport : function of latitude, basin **** NEMO-RD: requested is as a function of latitude. In principle, we do not want to translate y into latitude. to be written in meta data -->
+   <field id="CMIP6_sltnortha"     field_ref="sopst_atl"> this * 1e6 * $convSpsu* $Sgtokg </field> <!-- P1 (kg s-1) northward_ocean_salt_transport : unset -->
+   <field id="CMIP6_sltovgyre"     field_ref="sopstove_3bsn"> sopst_vs_3bsn*1e6*$convSpsu* $Sgtokg   - this*1e6*$convSpsu* $Sgtokg   </field> <!-- P1 (kg s-1) northward_ocean_salt_transport_due_to_gyre : From all advective mass transport processes, resolved and parameterized. **** NEMO-RD: requested is as a function of latitude. In principle, we do not want to translate y into. latitude. to be written in meta data --> 
+   <field id="CMIP6_sltovovrt"     field_ref="sopstove_3bsn"> this * 1e6 * $convSpsu * $Sgtokg  </field> <!-- P1 (kg s-1) northward_ocean_salt_transport_due_to_overturning : From all advective mass transport processes, resolved and parameterized. **** NEMO-RD: requested is as a function of latitude. In principle, we do not want to translate y into latitude. to be writtent in meta data --> 
+   <field id="CMIP6_so"            field_ref="soce_e3t" expr="@soce_e3t / @e3t * $convSpsu"  > soce_e3t / e3t * $convSpsu  </field> <!-- P1 (0.001) sea_water_salinity : Sea Water Salinity -->
+   <field id="CMIP6_sob"           field_ref="sbs_e3tb" expr="@sbs_e3tb / @e3tb * $convSpsu" > sbs_e3tb / e3tb * $convSpsu </field>  <!-- P1 (0.001) sob : Model prognostic salinity at bottom-most model grid cell -->
+   <field id="CMIP6_soga"          field_ref="scsaltot"  > this * $convSpsu </field> <!-- P1 (0.001) sea_water_salinity : Global Mean Sea Water Salinity -->
+   <field id="CMIP6_somint"        field_ref="somint" > this * $convSpsu </field>  <!-- P1 (1e-3 kg m-2) somint : Full column sum of density*cell thickness*prognostic salinity. If the model is Boussinesq, then use Boussinesq reference density for the density factor. -->
+   <field id="CMIP6_sos"           field_ref="sss"  > this * $convSpsu </field> <!-- P1 (0.001) sea_surface_salinity : Sea Surface Salinity -->
+   <field id="CMIP6_sosga"         field_ref="scssstot" > this * $convSpsu </field>  <!-- P1 (0.001) sea_surface_salinity : Global Average Sea Surface Salinity -->
+   <field id="CMIP6_sossq"         field_ref="sss2" > this * $convSpsu * $convSpsu  </field> <!-- P3 (1e-06) sossq : Square of Sea Surface Salinity --> 
+   <field id="CMIP6_sw18O"         field_ref="dummy_XYA"        /> <!-- P1 (1) isotope_ratio_of_17O_to_16O_in_sea_water_excluding_solutes_and_solids : Ratio of abundance of oxygen-17 (17O) atoms to oxgen-16 (16O) atoms in sea water -->
+   <field id="CMIP6_sw2H"          field_ref="dummy_XYO"        /> <!-- P1 (1)  : Ratio of abundance of hydrogen-2 (2H) atoms to hydrogen-1 (1H) atoms in sea water -->
+   <field id="CMIP6_t20d"      field_ref="20d"         /> <!-- P1 (m) depth_of_isosurface_of_sea_water_potential_temperature : unset -->
+   <field id="CMIP6_tauucorr"      field_ref="dummy_FAFMIP"         /> <!-- P1 (N m-2) surface_downward_x_stress_correction : This is the stress on the liquid ocean from overlying atmosphere, sea ice, ice shelf, etc.  *** NEMO-RD : TODO for FAFMIP experiments ??? -->
+   <field id="CMIP6_tauuo"         field_ref="utau"             /> <!-- P1 (N m-2) surface_downward_x_stress : This is the stress on the liquid ocean from overlying atmosphere, sea ice, ice shelf, etc. -->
+   <field id="CMIP6_tauvcorr"      field_ref="dummy_FAFMIP"         /> <!-- P1 (N m-2) surface_downward_y_stress_correction : This is the stress on the liquid ocean from overlying atmosphere, sea ice, ice shelf, etc.*** NEMO-RD : TODO for FAFMIP experiments ???-->
+   <field id="CMIP6_tauvo"         field_ref="vtau"             /> <!-- P1 (N m-2) surface_downward_y_stress : This is the stress on the liquid ocean from overlying atmosphere, sea ice, ice shelf, etc. -->
+   <field id="CMIP6_thetao"        field_ref="toce_pot"  expr="@toce_pot_e3t / @e3t" > toce_pot_e3t / e3t </field>  <!-- P1 (degC) sea_water_potential_temperature : Diagnostic should be contributed even for models using conservative temperature as prognostic field. -->
+   <field id="CMIP6_thetaoga"      field_ref="sctemtotpot"      /> <!-- P1 (degC) sea_water_potential_temperature : Diagnostic should be contributed even for models using conservative temperature as prognostic field -->
+   <field id="CMIP6_thetaot"       field_ref="toce_pot_vmean"   /> <!-- P1 (degC) sea_water_potential_temperature : Vertical average of the sea water potential temperature through the whole ocean depth -->
+   <field id="CMIP6_thetaot2000"   field_ref="toce_pot_vmean2000"         /> <!-- P1 (degC) sea_water_potential_temperature : Upper 2000m, 2D field -->
+   <field id="CMIP6_thetaot300"    field_ref="toce_pot_vmean300"         /> <!-- P1 (degC) sea_water_potential_temperature : Upper 300m, 2D field -->
+   <field id="CMIP6_thetaot700"    field_ref="toce_pot_vmean700"         /> <!-- P1 (degC) sea_water_potential_temperature : Upper 700m, 2D field -->
+   <field id="CMIP6_thkcello"  field_ref="e3t"        /> <!-- P1 (m) cell_thickness : Ocean Model Cell Thickness -->
+   <field id="CMIP6_tnkebto"   field_ref="dummy_XYO"        /> <!-- P2 (W m-2) tendency_of_ocean_eddy_kinetic_energy_content_due_to_bolus_transport : Depth integrated impacts on kinetic energy arising from parameterized eddy-induced advection. For CMIP5, this diagnostic was 3d, whereas the CMIP6 depth integrated diagnostic is sufficient for many purposes and reduces archive requirements. -->
+   <field id="CMIP6_tnkebto2d"     field_ref="eketrd_eiv"        /> <!-- P3 (W m-2) tendency_of_ocean_eddy_kinetic_energy_content_due_to_bolus_transport : Depth integrated impacts on kinetic energy arising from parameterized eddy-induced advection. For CMIP5, this diagnostic was 3d, whereas the CMIP6 depth integrated diagnostic is sufficient for many purposes and reduces archive requirements.  -->
+   <field id="CMIP6_tnpeo"         field_ref="tnpeo"        /> <!-- P1 (W m-2) tendency_of_ocean_potential_energy_content : Rate that work is done against vertical stratification, as measured by the vertical heat and salt diffusivity. Report here as depth integrated two-dimensional field. -->
+   <field id="CMIP6_tnpeot"        field_ref="dummy_XYO"        /> <!-- P1 (W m-2) tendency_of_ocean_potential_energy_content_due_to_tides : unset -->
+   <field id="CMIP6_tnpeotb"       field_ref="dummy_XYO"        /> <!-- P1 (W m-2) tendency_of_ocean_potential_energy_content_due_to_background : unset -->
+   <field id="CMIP6_tob"           field_ref="toce_potb_e3tb" expr="@toce_potb_e3tb / @e3tb" > toce_potb_e3tb / e3tb </field> <!-- P1 (degC) sea_water_potential_temperature_at_sea_floor : Potential temperature at the ocean bottom-most grid cell.  -->
+   <field id="NEMO_tomint"        field_ref="tosmint"           /> <!-- P2 (1e-3 kg m-2) tomint : Full column sum of density*cell thickness*prognostic temperature. If the model is Boussinesq, then use Boussinesq reference density for the density factor. *** NEMO-RD assumes this is potential temperature + provides with units Â°C kg m-2-->
+   <field id="CMIP6_tos"           field_ref="sst_pot"              /> <!-- P1 (degC) sea_surface_temperature : temperature of liquid ocean.  Note that the correct standard_name for this variable is "sea_surface_temperature", not "surface_temperature", but this was discovered too late to correct.  To maintain consistency across CMIP5 models, the wrong standard_name will continue to be used. **** NEMO-RD: TODO : JM: is this really requested in K? This does not agree with the .xls document. To be clarified. In NEMO, sst given in Celsius -->
+   <field id="CMIP6_tosga"         field_ref="scssttot"           /> <!-- P1 (degC) sea_surface_temperature : This may differ from "surface temperature" in regions of sea ice.This may differ from "surface temperature" in regions of sea ice.For models using conservative temperature as prognostic field, they should report the SST as surface potent -->
+   <field id="CMIP6_tossq"         field_ref="sst_pot2"             /> <!-- P1 (degC2) square_of_sea_surface_temperature : square of temperature of liquid ocean, averaged over the day.  -->  
+   <field id="CMIP6_ugrid"         field_ref="dummy_XY"         /> <!-- P1 () longitude : Provide for models with unstructured grids only -->
+   <field id="CMIP6_umo"           field_ref="uocetr_eff" > this * $rau0 </field> <!-- P1 (kg s-1) ocean_mass_x_transport : X-ward mass transport from resolved and parameterized advective transport. -->
+   <field id="CMIP6_uo"            field_ref="uoce_e3u" expr="@uoce_e3u / @e3u" > uoce_e3u / e3u </field> <!-- P1 (m s-1) sea_water_x_velocity : Prognostic x-ward velocity component resolved by the model. -->
+   <field id="CMIP6_vmo"           field_ref="vocetr_eff"  > this * $rau0 </field> <!-- P1 (kg s-1) ocean_mass_y_transport : Y-ward mass transport from resolved and parameterized advective transport. -->
+   <field id="CMIP6_vo"            field_ref="voce_e3v" expr="@voce_e3v / @e3v" > voce_e3v / e3v </field> <!-- P1 (m s-1) sea_water_y_velocity : Prognostic x-ward velocity component resolved by the model. -->
+   <field id="CMIP6_volcello"      field_ref="dummy_XYO"        /> <!-- P1 (m3) ocean_volume : grid-cell volume ca. 2000. **** NEMO-RD does not do: not requested by OMIP and ambiguous definition -->
+   <field id="CMIP6_volo"          field_ref="scvoltot"           /> <!-- P1 (m3) sea_water_volume : Total volume of liquid seawater. -->
+   <field id="CMIP6_vsf"           field_ref="dummy_XY"         /> <!-- P1 (kg m-2 s-1) virtual_salt_flux_into_sea_water : It is set to zero in models which receive a real water flux. -->
+   <field id="CMIP6_vsfcorr"       field_ref="dummy_XY"         /> <!-- P1 (kg m-2 s-1) virtual_salt_flux_correction : It is set to zero in models which receive a real water flux. -->
+   <field id="CMIP6_vsfevap"       field_ref="dummy_XY"         /> <!-- P1 (kg m-2 s-1) virtual_salt_flux_into_sea_water_due_to_evaporation : zero for models using real water fluxes. -->
+   <field id="CMIP6_vsfpr"         field_ref="dummy_XY"         /> <!-- P1 (kg m-2 s-1) virtual_salt_flux_into_sea_water_due_to_rainfall : zero for models using real water fluxes. -->
+   <field id="CMIP6_vsfriver"      field_ref="dummy_XY"         /> <!-- P1 (kg m-2 s-1) virtual_salt_flux_into_sea_water_from_rivers : zero for models using real water fluxes. -->
+   <field id="CMIP6_vsfsit"        field_ref="dummy_XY"         /> <!-- P2 (kg m-2 s-1) virtual_salt_flux_into_sea_water_due_to_sea_ice_thermodynamics : This variable measures the virtual salt flux into sea water due to the melting of sea ice. It is set to zero in models which receive a real water flux. -->
+   <field id="CMIP6_wfcorr"        field_ref="erp" > (-1.) * erp  </field> <!-- P1 (kg m-2 s-1) water_flux_correction : Positive flux implies correction adds water to ocean.*** NEMO-RD : WARNING in field_ocean, empmr is defined as water flux out of sea ice and sea water, contrary to comment in field. direction expected here is INTO ocean, hence change of sign. -->
+   <field id="CMIP6_wfo"           field_ref="empmr" > (-1.) *  empmr </field> <!-- P1 (kg m-2 s-1) water_flux_into_sea_water : computed as the water  flux into the ocean divided by the area of the ocean portion of the grid cell.  This is the sum of the next two variables in this table. *** NEMO-RD : WARNING in field_ocean, empmr is defined as water flux out of sea ice and sea water, contrary to comment in field. direction expected here is INTO ocean, hence change of sign. -->
+   <field id="CMIP6_wfonocorr"     field_ref="empmr" > (-1.) *  empmr + erp </field><!-- P1 (kg m-2 s-1) water_flux_into_sea_water_without_flux_correction : computed as the water  flux (without flux correction) into the ocean divided by the area of the ocean portion of the grid cell. *** NEMO-RD : WARNING in field_ocean, empmr is defined as water flux out of sea ice and sea water, contrary to comment in field. direction expected here is INTO ocean, hence change of sign. -->
+   <field id="CMIP6_wmo"           field_ref="wocetr_eff" > this * $rau0 </field> <!-- P1 (kg s-1) upward_ocean_mass_transport : Upward mass transport from resolved and parameterized advective transport. -->
+   <field id="CMIP6_wo"            field_ref="woce" expr="@woce_e3w / @e3w"  > woce_e3w / e3w </field> <!-- P1 (m s-1) upward_sea_water_velocity : Sea Water Vertical Velocity -->
+   <field id="CMIP6_zfullo"    field_ref="dummy_XYO"        /> <!-- P1 (m) depth_below_geoid : Depth below geoid -->
+   <field id="CMIP6_zhalfo"    field_ref="dummy_XYO"        /> <!-- P1 (m) depth_below_geoid : Depth below geoid -->
+   <field id="CMIP6_zos"           field_ref="sshdyn"             /> <!-- P1 (m) sea_surface_height_above_geoid : This is the dynamic sea level, so should have zero global area mean. It should not include inverse barometer depressions from sea ice. -->
+   <field id="CMIP6_zossq"         field_ref="sshdyn2"         /> <!-- P1 (m2) square_of_sea_surface_height_above_geoid : Surface ocean geoid defines z=0. -->
+   <field id="CMIP6_zostoga"       field_ref="scsshtst" />       <!-- P1 (m) global_average_thermosteric_sea_level_change : There is no CMIP6 request for zosga nor zossga. -->
+
+ <!-- for variables which realm equals one of _seaIce-->
+   <field id="CMIP6_siage"         field_ref="iceage"            /> <!-- P1 (s) age_of_sea_ice : Age of sea ice -->
+   <field id="CMIP6_siareaacrossline" field_ref="transport_siarea_transect"        /> <!-- P2 (m2 s-1) siareaacrossline : net (sum of transport in all directions) sea ice area transport through the following four passages, positive into the Arctic Ocean 1. Fram Strait = (11.5W,81.3N to (10.5E,79.6N) 2. Canadian Archipelego = (128.2W,70.6N) to (59.3W,82.1N) 3. Barents opening = (16.8E,76.5N) to (19.2E,70.2N) 4. Bering Strait = (171W,66.2N) to (166W,65N) -->
+   <field id="CMIP6_siarean"       field_ref="NH_sc_icearea" />     <!-- P2 (1e6 km2) sea_ice_area : total area of sea ice in the Northern hemisphere -->
+   <field id="CMIP6_siareas"       field_ref="SH_sc_icearea" />     <!-- P2 (1e6 km2) sea_ice_area : total area of sea ice in the Southern hemisphere -->
+   <field id="CMIP6_sicompstren"   field_ref="icestr"      /> <!-- P2 (N m-1) compressive_strength_of_sea_ice : Computed strength of the ice pack, defined as the energy (J m-2) dissipated per unit area removed from the ice pack under compression, and assumed proportional to the change in potential energy caused by ridging. For Hibler-type models, this is P (= P*hexp(-C(1-A))) -->
+   <field id="CMIP6_siconc"        field_ref="iceconc_pct"           /> <!-- P1 (%) sea_ice_area_fraction : Area fraction of grid cell covered by sea ice -->
+   <field id="CMIP6_siconca"       field_ref="dummy_XY"         /> <!-- P1 (%) sea_ice_area_fraction : Area fraction of grid cell covered by sea ice -->
+   <field id="CMIP6_sidconcdyn"    field_ref="afxdyn"       /> <!-- P2 (s-1) tendency_of_sea_ice_area_fraction_due_to_dynamics : Total change in sea-ice area fraction through dynamics-related processes (advection, divergence...) -->
+   <field id="CMIP6_sidconcth"     field_ref="afxthd"        /> <!-- P2 (s-1) tendency_of_sea_ice_area_fraction_due_to_thermodynamics : Total change in sea-ice area fraction through thermodynamic processes -->
+   <field id="CMIP6_sidivvel"      field_ref="idive"         /> <!-- P2 (s-1) divergence_of_sea_ice_velocity : Divergence of sea-ice velocity field (first shear strain invariant) -->
+   <field id="CMIP6_sidmassdyn"    field_ref="dmidyn"       /> <!-- P2 (kg m-2 s-1) sidmassdyn : Total change in sea-ice mass through dynamics-related processes (advection,...) divided by grid-cell area -->
+   <field id="CMIP6_sidmassevapsubl" field_ref="dmisub"  /> <!-- P1 (kg m-2 s-1) water_evaporation_flux : The rate of change of sea-ice mass change through evaporation and sublimation divided by grid-cell area -->
+   <field id="CMIP6_sidmassgrowthbot" field_ref="dmibog" /> <!-- P2 (kg m-2 s-1) tendency_of_sea_ice_amount_due_to_congelation_ice_accumulation : The rate of change of sea ice mass due to vertical growth of existing sea ice at its base divided by grid-cell area. -->
+   <field id="CMIP6_sidmassgrowthwat" field_ref="dmiopw" /> <!-- P2 (kg m-2 s-1) sidmassgrowthwat : The rate of change of sea ice mass due to sea ice formation in supercooled water (often through frazil formation) divided by grid-cell area. Together, sidmassgrowthwat and sidmassgrowthbot should give total ice growth -->
+   <field id="CMIP6_sidmasslat"    field_ref="dummy_XY"         /> <!-- P2 (kg m-2 s-1) sidmasslat : The rate of change of sea ice mass through lateral melting divided by grid-cell area (report 0 if not explicitly calculated thermodynamically) -->
+   <field id="CMIP6_sidmassmeltbot" field_ref="dmibom"   /> <!-- P1 (kg m-2 s-1) tendency_of_sea_ice_amount_due_to_basal_melting : The rate of change of sea ice mass through melting at the ice bottom divided by grid-cell area -->
+   <field id="CMIP6_sidmassmelttop" field_ref="dmisum"   /> <!-- P1 (kg m-2 s-1) tendency_of_sea_ice_amount_due_to_surface_melting : The rate of change of sea ice mass through melting at the ice surface divided by grid-cell area -->
+   <field id="CMIP6_sidmasssi"     field_ref="dmisni"        /> <!-- P2 (kg m-2 s-1) tendency_of_sea_ice_amount_due_to_snow_conversion : The rate of change of sea ice mass due to transformation of snow to sea ice divided by grid-cell area -->
+   <field id="CMIP6_sidmassth"     field_ref="dmithd"        /> <!-- P2 (kg m-2 s-1) sidmassth : Total change in sea-ice mass from thermodynamic processes divided by grid-cell area -->
+   <field id="CMIP6_sidmasstranx"  field_ref="xmtrptot"     /> <!-- P2 (kg s-1) sea_ice_x_transport : Includes transport of both sea ice and snow by advection -->
+   <field id="CMIP6_sidmasstrany"  field_ref="ymtrptot"     /> <!-- P2 (kg s-1) sea_ice_y_transport : Includes transport of both sea ice and snow by advection -->
+   <field id="CMIP6_sidragbot"     field_ref="dummy_XY"         /> <!-- P3 (1.0) sidragbot : Oceanic drag coefficient that is used to calculate the oceanic momentum drag on sea ice -->
+   <field id="CMIP6_sidragtop"     field_ref="dummy_XY"         /> <!-- P3 (1.0) surface_drag_coefficient_for_momentum_in_air : Atmospheric drag coefficient that is used to calculate the atmospheric momentum drag on sea ice -->
+   <field id="CMIP6_siextentn"     field_ref="NH_sc_iceextt"  />   <!-- P2 (1e6 km2) sea_ice_extent : Total area of all Northern-Hemisphere grid cells that are covered by at least 15 % areal fraction of sea ice -->
+   <field id="CMIP6_siextents"     field_ref="SH_sc_iceextt"  />     <!-- P2 (1e6 km2) sea_ice_extent : Total area of all Southern-Hemisphere grid cells that are covered by at least 15 % areal fraction of sea ice -->
+   <field id="CMIP6_sifb"          field_ref="icefb"             /> <!-- P2 (m) sea_ice_freeboard : Mean height of sea-ice surface (=snow-ice interface when snow covered) above sea level -->
+   <field id="CMIP6_siflcondbot"   field_ref="hfxconbo"      /> <!-- P2 (W m-2) siflcondbot : the net heat conduction flux at the ice base -->
+   <field id="CMIP6_siflcondtop"   field_ref="hfxconsu"      /> <!-- P2 (W m-2) siflcondtop : the net heat conduction flux at the ice surface -->
+   <field id="CMIP6_siflfwbot"     field_ref="wfxtot"        /> <!-- P2 (kg m-2 s-1) siflfwbot : Total flux of fresh water from water into sea ice divided by grid-cell area; This flux is negative during ice growth (liquid water mass decreases, hence upward flux of freshwater), positive during ice melt (liquid water mass increases, hence downward flux of freshwater) -->
+   <field id="CMIP6_siflfwdrain"   field_ref="wfxsum"           /> <!-- P2 (kg m-2 s-1) siflfwdrain : Total flux of fresh water from sea-ice surface into underlying ocean. This combines both surface melt water that drains directly into the ocean and the drainage of surface melt pond. By definition, this flux is always positive. -->
+   <field id="CMIP6_sifllatstop"   field_ref="dummy_XY"         /> <!-- P1 (W m-2) surface_upward_latent_heat_flux : the net latent heat flux over sea ice -->
+   <field id="CMIP6_sifllwdtop"    field_ref="dummy_XY"         /> <!-- P1 (W m-2) surface_downwelling_longwave_flux_in_air : the downwelling longwave flux over sea ice (always positive) -->
+   <field id="CMIP6_sifllwutop"    field_ref="dummy_XY"         /> <!-- P1 (W m-2) surface_upwelling_longwave_flux_in_air : the upwelling longwave flux over sea ice (always negative) -->
+   <field id="NEMO_siflsaltbot"   field_ref="sfx_mv" > this * $Sgtokg </field> <!-- P2 (kg m-2 s-1) siflsaltbot : Total flux of salt from water into sea ice divided by grid-cell area; salt flux is upward (negative) during ice growth when salt is embedded into the ice and downward (positive) during melt when salt from sea ice is again released to the ocean -->
+   <field id="CMIP6_siflsenstop"   field_ref="dummy_XY"         /> <!-- P1 (W m-2) surface_upward_sensible_heat_flux : the net sensible heat flux over sea ice -->
+   <field id="CMIP6_siflsensupbot" field_ref="hfxsenso"    /> <!-- P2 (W m-2) siflsensupbot : the net sensible heat flux under sea ice from the ocean -->
+   <field id="CMIP6_siflswdbot"    field_ref="dummy_XY"         /> <!-- P2 (W m-2) siflswdbot : The downwelling shortwave flux underneath sea ice (always positive) -->
+   <field id="CMIP6_siflswdtop"    field_ref="dummy_XY"         /> <!-- P1 (W m-2) surface_downwelling_shortwave_flux_in_air : The downwelling shortwave flux over sea ice (always positive by sign convention) -->
+   <field id="CMIP6_siflswutop"    field_ref="dummy_XY"         /> <!-- P1 (W m-2) surface_upwelling_shortwave_flux_in_air : The upwelling shortwave flux over sea ice (always negative) -->
+   <field id="CMIP6_siforcecoriolx" field_ref="corstrx"   /> <!-- P3 (N m-2) siforcecoriolx : X-component of force on sea ice caused by coriolis force -->
+   <field id="CMIP6_siforcecorioly" field_ref="corstry"   /> <!-- P3 (N m-2) siforcecorioly : Y-component of force on sea ice caused by coriolis force -->
+   <field id="CMIP6_siforceintstrx" field_ref="intstrx"   /> <!-- P3 (N m-2) siforceintstrx : X-component of force on sea ice caused by internal stress (divergence of sigma) -->
+   <field id="CMIP6_siforceintstry" field_ref="intstry"   /> <!-- P3 (N m-2) siforceintstry : Y-component of force on sea ice caused by internal stress (divergence of sigma) -->
+   <field id="CMIP6_siforcetiltx"  field_ref="dssh_dx"     /> <!-- P3 (N m-2) siforcetiltx : X-component of force on sea ice caused by sea-surface tilt -->
+   <field id="CMIP6_siforcetilty"  field_ref="dssh_dy"     /> <!-- P3 (N m-2) siforcetilty : Y-component of force on sea ice caused by sea-surface tilt -->
+   <field id="CMIP6_sihc"          field_ref="icehcneg"             /> <!-- P2 (J m-2) integral_of_sea_ice_temperature_wrt_depth_expressed_as_heat_content : Heat content of all ice in grid cell divided by total grid-cell area. Water at 0 Celsius is assumed to have a heat content of 0 J.  Does not include heat content of snow, but does include heat content of brine. Heat content is always negative, since both the sensible and the latent heat content of ice are less than that of water -->
+   <field id="CMIP6_siitdconc"     field_ref="iceconc_cat_pct_mv"        /> <!-- P3 (%) siitdconc : Area fraction of grid cell covered by each ice-thickness category (vector with one entry for each thickness category starting from the thinnest category, netcdf file should use thickness bounds of the categories as third coordinate axis) -->
+   <field id="CMIP6_siitdsnconc"   field_ref="dummy_XY"         /> <!-- P3 (%) siitdsnconc : Area fraction of grid cell covered by snow in each ice-thickness category (vector with one entry for each thickness category starting from the thinnest category, netcdf file should use thickness bounds of the categories as third coordinate axis) -->
+   <field id="CMIP6_siitdsnthick"  field_ref="snowthic_cat_mv"     /> <!-- P3 (m) siitdsnthick : Actual thickness of snow in each  category (NOT volume divided by grid area),  (vector with one entry for each thickness category starting from the thinnest category, netcdf file should use thickness bounds of categories as third coordinate axis) -->
+   <field id="CMIP6_siitdthick"    field_ref="icethic_cat_mv"       /> <!-- P3 (m) siitdthick : Actual (floe) thickness of sea ice in each  category (NOT volume divided by grid area),  (vector with one entry for each thickness category starting from the thinnest category, netcdf file should use thickness bounds of categories as third coordinate axis) -->
+   <field id="CMIP6_simass"        field_ref="icemass"           /> <!-- P1 (kg m-2) sea_ice_amount : Total mass of sea ice divided by grid-cell area -->
+   <field id="CMIP6_simassacrossline" field_ref="transport_simasse_transect"        /> <!-- P1 (kg s-1) sea_ice_transport_across_line : net (sum of transport in all directions) sea ice area transport through the following four passages, positive into the Arctic Ocean 1. Fram Strait = (11.5W,81.3N to (10.5E,79.6N) 2. Canadian Archipelego = (128.2W,70.6N) to (59.3W,82.1N) 3. Barents opening = (16.8E,76.5N) to (19.2E,70.2N) 4. Bering Strait = (171W,66.2N) to (166W,65N) -->
+   <field id="CMIP6_simpconc"      field_ref="dummy_XY"         /> <!-- P3 (%) area_fraction : Fraction of sea ice, by area, which is covered by melt ponds, giving equal weight to every square metre of sea ice . -->
+   <field id="CMIP6_simpmass"      field_ref="dummy_XY"         /> <!-- P3 (kg m-2) simpmass : Meltpond mass per area of sea ice. -->
+   <field id="CMIP6_simprefrozen"  field_ref="dummy_XY"         /> <!-- P3 (m) simprefrozen : Volume of refrozen ice on melt ponds divided by meltpond covered area -->
+   <field id="CMIP6_sipr"          field_ref="dummy_XY"         /> <!-- P1 (kg m-2 s-1) rainfall_flux : mass of liquid precipitation falling onto sea ice divided by grid-cell area -->
+   <field id="CMIP6_sirdgconc"     field_ref="dummy_XY"         /> <!-- P3 (1.0) sirdgconc : Fraction of sea ice, by area, which is covered by sea ice ridges, giving equal weight to every square metre of sea ice . -->
+   <field id="CMIP6_sirdgthick"    field_ref="dummy_XY"         /> <!-- P3 (m) sirdgthick : Sea Ice Ridge Height (representing mean height over the ridged area) -->
+   <field id="CMIP6_sisali"        field_ref="icesal"           /> <!-- P1 (0.001) sea_ice_salinity : Mean sea-ice salinity of all sea ice in grid cell -->
+   <field id="CMIP6_sisaltmass"    field_ref="icesmass"   > this * $Sgtokg </field><!-- P3 (kg m-2) sisaltmass : Total mass of all salt in sea ice divided by grid-cell area -->
+   <field id="CMIP6_sishevel"      field_ref="ishear"         /> <!-- P2 (s-1) sishevel : Maximum shear of sea-ice velocity field (second shear strain invariant) -->
+   <field id="CMIP6_sisnconc"      field_ref="dummy_XY"         /> <!-- P1 (%) surface_snow_area_fraction : Fraction of sea ice, by area, which is covered by snow, giving equal weight to every square metre of sea ice . Exclude snow that lies on land or land ice. -->
+   <field id="CMIP6_sisnhc"        field_ref="isnhcneg"           /> <!-- P2 (J m-2) thermal_energy_content_of_surface_snow : Heat-content of all snow in grid cell divided by total grid-cell area. Snow-water equivalent at 0 Celsius is assumed to have a heat content of 0 J.  Does not include heat content of sea ice. -->
+   <field id="CMIP6_sisnmass"      field_ref="snomass"         /> <!-- P1 (kg m-2) liquid_water_content_of_surface_snow : Total mass of snow on sea ice divided by grid-cell area -->
+   <field id="CMIP6_sisnthick"     field_ref="snothic"        /> <!-- P1 (m) surface_snow_thickness : Actual thickness of snow (snow volume divided by snow-covered area) -->
+   <field id="CMIP6_sispeed"       field_ref="icevel_mv"          /> <!-- P1 (m s-1) sea_ice_speed : Speed of ice (i.e. mean absolute velocity) to account for back-and-forth movement of the ice -->
+   <field id="CMIP6_sistremax"     field_ref="sheastr"        /> <!-- P3 (N m-1) sistremax : Maximum shear stress in sea ice (second stress invariant) -->
+   <field id="CMIP6_sistresave"    field_ref="normstr"       /> <!-- P3 (N m-1) sistresave : Average normal stress in sea ice (first stress invariant) -->
+   <field id="CMIP6_sistrxdtop"    field_ref="utau_ice"       /> <!-- P2 (N m-2) surface_downward_x_stress : X-component of atmospheric stress on sea ice -->
+   <field id="CMIP6_sistrxubot"    field_ref="utau_oi"       /> <!-- P2 (N m-2) sistrxubot : X-component of ocean stress on sea ice -->
+   <field id="CMIP6_sistrydtop"    field_ref="vtau_ice"       /> <!-- P2 (N m-2) surface_downward_y_stress : Y-component of atmospheric stress on sea ice -->
+   <field id="CMIP6_sistryubot"    field_ref="vtau_oi"       /> <!-- P2 (N m-2) downward_y_stress_at_sea_ice_base : Y-component of ocean stress on sea ice -->
+   <field id="CMIP6_sitempbot"     field_ref="icebotK"        /> <!-- P2 (K) sitempbot : Report temperature at interface, NOT temperature within lowermost model layer -->
+   <field id="CMIP6_sitempsnic"    field_ref="icesntK"       /> <!-- P1 (K) sea_ice_surface_temperature : Report surface temperature of ice where snow thickness is zero -->
+   <field id="CMIP6_sitemptop"     field_ref="icestK"        /> <!-- P1 (K) sea_ice_surface_temperature : Report surface temperature of snow where snow covers the sea ice. -->
+   <field id="CMIP6_sithick"       field_ref="icethic"          /> <!-- P1 (m) sea_ice_thickness : Actual (floe) thickness of sea ice (NOT volume divided by grid area as was done in CMIP5) -->
+   <field id="CMIP6_sitimefrac"    field_ref="icepres"       /> <!-- P1 (1.0) sitimefrac : Fraction of time steps of the averaging period during which sea ice is present (siconc >0 ) in a grid cell -->
+   <field id="CMIP6_siu"           field_ref="uice_mv"              /> <!-- P1 (m s-1) sea_ice_x_velocity : The x-velocity of ice on native model grid -->
+   <field id="CMIP6_siv"           field_ref="vice_mv"              /> <!-- P1 (m s-1) sea_ice_y_velocity : The y-velocity of ice on native model grid -->
+   <field id="CMIP6_sivol"         field_ref="icevolu"            /> <!-- P1 (m) sea_ice_thickness : Total volume of sea ice divided by grid-cell area (this used to be called ice thickness in CMIP5) -->
+   <field id="CMIP6_sivoln"        field_ref="NH_sc_icevolu"  />     <!-- P2 (1e3 km3) sea_ice_volume : total volume of sea ice in the Northern hemisphere -->
+   <field id="CMIP6_sivols"        field_ref="SH_sc_icevolu"  />     <!-- P2 (1e3 km3) sea_ice_volume : total volume of sea ice in the Southern hemisphere -->
+   <field id="CMIP6_sndmassdyn"    field_ref="dmsdyn"       /> <!-- P2 (kg m-2 s-1) sndmassdyn : the rate of change of snow mass through advection with sea ice divided by grid-cell area -->
+   <field id="CMIP6_sndmassmelt"   field_ref="dmsmel"      /> <!-- P1 (kg m-2 s-1) surface_snow_melt_flux : the rate of change of snow mass through melt divided by grid-cell area -->
+   <field id="CMIP6_sndmasssi"     field_ref="dmsssi"        /> <!-- P2 (kg m-2 s-1) sndmasssi : the rate of change of snow mass due to transformation of snow to sea ice divided by grid-cell area -->
+   <field id="CMIP6_sndmasssnf"    field_ref="dmsspr"       /> <!-- P1 (kg m-2 s-1) snowfall_flux : mass of solid precipitation falling onto sea ice divided by grid-cell area -->
+   <field id="CMIP6_sndmasssubl"   field_ref="dmssub"      /> <!-- P2 (kg m-2 s-1) sndmasssubl : the rate of change of snow mass through sublimation and evaporation divided by grid-cell area -->
+   <field id="CMIP6_sndmasswindrif" field_ref="dummy_XY"         /> <!-- P2 (kg m-2 s-1) sndmasswindrif : the rate of change of snow mass through wind drift of snow (from sea-ice into the sea) divided by grid-cell area -->
+   <field id="CMIP6_snmassacrossline" field_ref="transport_snmasse_transect"        /> <!-- P2 (kg s-1) snmassacrossline : net (sum of transport in all directions) snow mass transport through the following four passages, positive into the Arctic Ocean 1. Fram Strait = (11.5W,81.3N to (10.5E,79.6N) 2. Canadian Archipelego = (128.2W,70.6N) to (59.3W,82.1N) 3. Barents opening = (16.8E,76.5N) to (19.2E,70.2N) 4. Bering Strait = (171W,66.2N) to (166W,65N) -->
+
+</field_group>
+</field_definition>
+</context>
Index: /CONFIG/UNIFORM/v6/IPSLCM6.3/GENERAL/PARAM/tracer.def_ESMCO2AER
===================================================================
--- /CONFIG/UNIFORM/v6/IPSLCM6.3/GENERAL/PARAM/tracer.def_ESMCO2AER	(revision 6531)
+++ /CONFIG/UNIFORM/v6/IPSLCM6.3/GENERAL/PARAM/tracer.def_ESMCO2AER	(revision 6531)
@@ -0,0 +1,13 @@
+&version=1.0
+&lmdz
+default hadv=10 vadv=10 phases=g type=tracer parent=air
+H2O hadv=14 vadv=14
+H2O phases=ls
+&co2i
+default hadv=10 vadv=10 phases=g type=tracer parent=air
+CO2
+&inca
+default parent=air phases=g hadv=10 vadv=10
+Rn222
+Pb210
+NO2,NO3,HNO3,N2O5,SO2,H2S,DMS,DMSO,NH3,CIDUSTM,CINO3M,CIN,AIBCM,AIPOMM,AIN,CSSSM,CSSO4M,CSNH4M,CSMSAM,CSNO3M,CSN,ASSSM,ASBCM,ASPOMM,ASSO4M,ASNH4M,ASMSAM,ASNO3M,ASN,SSSSM,SSN
Index: /CONFIG/UNIFORM/v6/IPSLCM6.3/GENERAL/PARAM/traceur.def_ESMCO2AER
===================================================================
--- /CONFIG/UNIFORM/v6/IPSLCM6.3/GENERAL/PARAM/traceur.def_ESMCO2AER	(revision 6531)
+++ /CONFIG/UNIFORM/v6/IPSLCM6.3/GENERAL/PARAM/traceur.def_ESMCO2AER	(revision 6531)
@@ -0,0 +1,5 @@
+4
+14 14 H2Ov
+10 10 H2Ol
+10 10 H2Oi
+10 10 CO2
Index: /CONFIG/UNIFORM/v6/IPSLCM6.3/GENERAL/PARAM/traceur_strataer.def
===================================================================
--- /CONFIG/UNIFORM/v6/IPSLCM6.3/GENERAL/PARAM/traceur_strataer.def	(revision 6531)
+++ /CONFIG/UNIFORM/v6/IPSLCM6.3/GENERAL/PARAM/traceur_strataer.def	(revision 6531)
@@ -0,0 +1,43 @@
+42
+14 14 H2Ov
+10 10 H2Ol
+10 10 H2Oi
+10 10 GASOCS
+10 10 GASSO2
+10 10 GASH2SO4
+10 10 BIN01
+10 10 BIN02
+10 10 BIN03
+10 10 BIN04
+10 10 BIN05
+10 10 BIN06
+10 10 BIN07
+10 10 BIN08
+10 10 BIN09
+10 10 BIN10
+10 10 BIN11
+10 10 BIN12
+10 10 BIN13
+10 10 BIN14
+10 10 BIN15
+10 10 BIN16
+10 10 BIN17
+10 10 BIN18
+10 10 BIN19
+10 10 BIN20
+10 10 BIN21
+10 10 BIN22
+10 10 BIN23
+10 10 BIN24
+10 10 BIN25
+10 10 BIN26
+10 10 BIN27
+10 10 BIN28
+10 10 BIN29
+10 10 BIN30
+10 10 BIN31
+10 10 BIN32
+10 10 BIN33
+10 10 BIN34
+10 10 BIN35
+10 10 BIN36
