Changeset 6784 for CONFIG/UNIFORM
- Timestamp:
- 03/26/24 16:03:31 (2 months ago)
- Location:
- CONFIG/UNIFORM/v6/LMDZORINCA_v6.2/EXPERIMENTS/LMDZORINCA
- Files:
-
- 8 added
- 2 deleted
- 12 edited
Legend:
- Unmodified
- Added
- Removed
-
CONFIG/UNIFORM/v6/LMDZORINCA_v6.2/EXPERIMENTS/LMDZORINCA/GES_LR/COMP/inca.card
r6681 r6784 5 5 [UserChoices] 6 6 #choose if input file will be regrid by xios, or read without regrid with netcdf 7 xios_read= n7 xios_read=y 8 8 # Set LMDZ_10m_winds to choose if the simulation will use online 10m wind (=y) or offline (=n) 9 9 LMDZ_10m_winds=y … … 32 32 33 33 [BoundaryFiles] 34 List=(${R_IN}/CHM/IPCC_AR6/SFLX/VERS 2/${RESOL_CHM}/ANT/sflx_lmdz_ANT_${year}_phy.nc, sflx_ANT.nc ),\35 (${R_IN}/CHM/IPCC_AR6/SFLX/VERS 2/${RESOL_CHM}/BBG/sflx_lmdz_BBG_${year}_phy.nc, sflx_BBG.nc ),\34 List=(${R_IN}/CHM/IPCC_AR6/SFLX/VERS3/${RESOL_CHM}/ANT/sflx_lmdz_ANT_${year}_dyn.nc, sflx_ANT_LR.nc ),\ 35 (${R_IN}/CHM/IPCC_AR6/SFLX/VERS3/${RESOL_CHM}/BBG/sflx_lmdz_BBG_${year}_dyn.nc, sflx_BBG_LR.nc ),\ 36 36 (${R_IN}/CHM/IPCC_AR6/AIRCRAFT/${RESOL_CHM}/aircraft_${year}_phy.nc , aircraft_mth.nc ),\ 37 37 (${R_IN}/CHM/IPCC_AR6/OXYDANTS/${RESOL_CHM}_yearly_interpolated/oxydants_${year}.nc, oxydants.nc ) 38 38 39 39 40 ListNonDel= (${R_IN}/CHM/INCA144142-L39/npp.nc , npp.nc )\ 41 (${R_IN}/CHM/IPCC_AR6/SFLX/VERS2/${RESOL_CHM}/sflx_lmdz_GHG.nc , sflx_GHG.nc )\ 42 (${R_IN}/CHM/IPCC_AR6/SFLX/VERS2/${RESOL_CHM}/sflx_lmdz_MISC.nc , sflx_MISC.nc )\ 43 (${R_IN}/CHM/IPCC_AR6/SFLX/VERS2/${RESOL_CHM}/sflx_lmdz_NAT.nc , sflx_NAT.nc )\ 44 (${R_IN}/CHM/IPCC_AR6/lglived_CMIP6.dat , lglived.dat )\ 45 (${R_IN}/CHM/INCA${RESOL_CHM}/landuse.nc , landuse.nc )\ 46 (${R_IN}/CHM/INCA${RESOL_CHM}/andres.nc , andres.nc )\ 47 (${R_IN}/CHM/INCA${RESOL_CHM}/casa_m.nc , casa_m.nc )\ 48 (${R_IN}/CHM/INCA${RESOL_CHM}/taka.nc , taka.nc )\ 49 (${R_IN}/CHM/INCA${RESOL_CHM}/casa_h.nc , casa_h.nc )\ 50 (${R_IN}/CHM/INCA${RESOL_CHM}/new_phototable.dat , phototable.dat ) 40 ListNonDel= (${R_IN}/CHM/IPCC_AR6/SFLX/VERS3/${RESOL_CHM}/sflx_lmdz_GHG_dyn.nc , sflx_GHG_LR.nc ),\ 41 (${R_IN}/CHM/IPCC_AR6/SFLX/VERS3/${RESOL_CHM}/sflx_lmdz_MISC_dyn.nc , sflx_MISC_LR.nc ),\ 42 (${R_IN}/CHM/IPCC_AR6/SFLX/VERS3/${RESOL_CHM}/sflx_lmdz_NAT_dyn.nc , sflx_NAT_LR.nc ),\ 43 (${R_IN}/CHM/IPCC_AR6/lglived_CMIP6.dat , lglived.dat ),\ 44 (${R_IN}/CHM/FILES_LONxLAT/landuse_lmdz_dyn.nc , landuse.nc ),\ 45 (${R_IN}/CHM/FILES_LONxLAT/npp_dyn.nc , npp.nc ),\ 46 (${R_IN}/CHM/INCA9695-L39/co2_carbonator.nc , co2_carbonator.nc ),\ 47 (${R_IN}/CHM/INCA${RESOL_CHM}/new_phototable.dat , phototable.dat ) 51 48 49 50 # co2_carbonator file with 1 degre resolution - to be used for CO2 studies 51 # (${R_IN}/CHM/FILES_LONxLAT/co2_carbonator_1deg.nc , co2_carbonator.nc ),\ 52 52 53 53 54 54 [ParametersFiles] 55 55 List= (${SUBMIT_DIR}/PARAM/inca.def, .),\ 56 (${MODIPSL}/modeles/INCA/src/INCA_XML/context_inca.xml, .) ,\ 57 (${MODIPSL}/modeles/INCA/src/INCA_XML/field_def_inca.xml, .) ,\ 58 (${MODIPSL}/modeles/INCA/src/INCA_XML/file_def_inca_restart.xml, file_def_inca_restart.xml ), \ 59 (${MODIPSL}/modeles/INCA/src/INCA_XML/file_def_inca_GES.xml, file_def_inca.xml ), \ 56 (${MODIPSL}/modeles/INCA/src/INCA_XML/context_inca.xml , . ),\ 57 (${MODIPSL}/modeles/INCA/src/INCA_XML/context_input_inca.xml , . ),\ 58 (${MODIPSL}/modeles/INCA/src/INCA_XML/context_oxydants_inca.xml , . ),\ 59 (${MODIPSL}/modeles/INCA/src/INCA_XML/context_start_GES_inca.xml, context_start_inca.xml ),\ 60 (${MODIPSL}/modeles/INCA/src/INCA_XML/context_co2_inca.xml , . ),\ 61 (${MODIPSL}/modeles/INCA/src/INCA_XML/context_sflx_inca.xml , . ),\ 62 (${MODIPSL}/modeles/INCA/src/INCA_XML/field_def_inca.xml , . ),\ 63 (${MODIPSL}/modeles/INCA/src/INCA_XML/file_def_inca_restart.xml , file_def_inca_restart.xml ),\ 64 (${MODIPSL}/modeles/INCA/src/INCA_XML/file_def_inca_GES.xml , file_def_inca.xml ),\ 60 65 (${MODIPSL}/bin/inca_${ConfChem}.dat, inca.dat) 61 66 -
CONFIG/UNIFORM/v6/LMDZORINCA_v6.2/EXPERIMENTS/LMDZORINCA/GES_LR/COMP/lmdz.card
r6567 r6784 4 4 [UserChoices] 5 5 # Physics package to use : 6 # LMDZ_Physics=AP for standard/old physics(defalut), can be used with LMDZ4_AR5 or LMDZ5/trunk sources 7 # LMDZ_Physics=NPv6.0.15_T or NPv6.0.15_S to be used with LMDZ6/branches/IPSLCM6.0.15 rev 3224 8 # LMDZ_Physics=NPv6.1 to be used with LMDZ6/branches/IPSLCM6.0.15 rev 3301 9 # LMDZ_Physics=NPv6.1.3 as NPv6.1 but allows tau_gl to be modified 10 LMDZ_Physics=NPv6.1.3 11 6 LMDZ_Physics=NPv6.2 12 7 13 8 # Activate the call to phytrac to run tracer simulation 14 9 iflag_phytrac=1 10 # desactivate aerosol_strato in lmdz 11 flag_aerosol_strat=0 15 12 16 # Set ConfType to choose parameters for aerosols, solar and green house gazes. 17 # The parameter file PARAM/config.def_$ConfType will be used. 18 # ConfType=preind/actuel/annuel 19 ConfType=annuel 13 # Use XIOS as output library 14 XIOS=y 20 15 21 pmagic=0.0 22 23 # Manage radiative aerosol effect and ozone 24 flag_aerosol=0 25 ok_ade=n 26 ok_aie=n 27 aerosol_couple=n 28 read_climoz=0 29 ok_cdnc=n 16 # Set the variable CREATE needed further below to find the initial and boundary condition files. 17 CREATE=ELC-${RESOL_ATM_3D} 30 18 31 19 # ByPass_hgardfou_teta=y : modify teta_ parameters for following CumulPeriod only … … 34 22 # ByPass_hgardfou_mats=y : set parameter purmats=y for following CumulPeriod only 35 23 ByPass_hgardfou_mats=n 24 25 # Set ConfType to choose parameters for aerosols, solar and green house gazes. 26 # The parameter file PARAM/config.def_$ConfType will be used. 27 # ConfType=preind/actuel/annuel 28 ConfType=annuel 29 30 # manage radiative aerosol effect and ozone 31 flag_aerosol=0 32 ok_ade=n 33 ok_aie=n 34 aerosol_couple=n 35 chemistry_couple=n 36 read_climoz=0 37 ok_cdnc=n 36 38 37 39 … … 63 65 64 66 [InitialStateFiles] 65 List= (${R_IN}/CHM/INCA144142-L79/start_o2a_noTer.nc , start.nc),\ 66 (${R_IN}/CHM/INCA144142-L79/startphy_o2a_noTer.nc , startphy.nc) 67 List= (${R_IN}/CHM/INCA${RESOL_CHM}/start_NAS_H2O.nc , start.nc ) \ 68 (${R_IN}/CHM/INCA${RESOL_CHM}/startphy_o2a_noTer.nc , startphy.nc ) 69 67 70 68 71 [BoundaryFiles] 69 List= (${R_IN}/ATM/LIMIT/AMIP.v20180427/interpol/${RESOL_ATM_XY}_eORCA1.2_gregorian/limit_${year}.nc, limit.nc),\72 List= (${R_IN}/ATM/LIMIT/ERA5.as1e5/interpol/144x142_eORCA1.2_gregorian/limit_${year}.nc, limit.nc),\ 70 73 (${R_IN}/ATM/OZONE/UReading/historical.v20160711.v2/interpol/${RESOL_ATM_XY}/climoz_LMDZ_${year}.nc, climoz_LMDZ.nc),\ 71 74 (${R_IN}/ATM/SOLAR/CMIP6/v3.1corr/Historical/solarforcing_v3.1_daily_6bands_${year}.nc, solarforcing.nc),\ … … 73 76 (${R_IN}/ATM/STRATAERO/CMIP6/v3/${RESOL_ATM_XY}/L${RESOL_ATM_Z}/tauswstrat.2D.${year}.nc, tauswstrat.2D.nc) 74 77 75 # Note: the SOLARANDVOLCANOES.txt is only used for LMDZ_Physics=AP and NPv3.2 (if ok_suntime_rrtm=n) 76 # Add the following file for LMDZ_Physics=AP (${R_IN}/ATM/IPCC_AR5/HISTORIQUE/SOLARANDVOLCANOES_1610_2008.txt, SOLARANDVOLCANOES.txt) 78 77 79 ListNonDel= (${R_IN}/ATM/GHG/CMIP6/historical/CO2_CMIP6_0000_2014.txt, CO2.txt),\ 78 80 (${R_IN}/ATM/GHG/CMIP6/historical/CH4_CMIP6_0000_2014.txt, CH4.txt),\ … … 80 82 (${R_IN}/ATM/GHG/CMIP6/historical/CFC11eq_CMIP6_0000_2014.txt, CFC11.txt),\ 81 83 (${R_IN}/ATM/GHG/CMIP6/historical/CFC12eq_CMIP6_0000_2014.txt, CFC12.txt) 82 83 [SmoothFiles]84 List= ()85 84 86 85 [ParametersFiles] … … 94 93 (${SUBMIT_DIR}/PARAM/run.def, .), \ 95 94 (${MODIPSL}/bin/tracer_${ConfChem}.def, tracer.def), \ 96 (${SUBMIT_DIR}/PARAM/iodef.xml, . ), \97 95 (${MODIPSL}/modeles/LMDZ/DefLists/context_lmdz.xml, . ), \ 98 96 (${MODIPSL}/modeles/LMDZ/DefLists/field_def_lmdz.xml, . ), \ … … 121 119 122 120 [OutputFiles] 123 List= (histmth.nc, ${R_OUT_ATM_O_M}/${PREFIX}_1M_histmth.nc, Post_1M_histmth), \ 124 (histmthCOSP.nc, ${R_OUT_ATM_O_M}/${PREFIX}_1M_histmthCOSP.nc, NONE), \ 125 (histmthNMC.nc, ${R_OUT_ATM_O_M}/${PREFIX}_1M_histmthNMC.nc, Post_1M_histmthNMC), \ 126 (histday.nc, ${R_OUT_ATM_O_D}/${PREFIX}_1D_histday.nc, NONE), \ 127 (histdayCOSP.nc, ${R_OUT_ATM_O_D}/${PREFIX}_1D_histdayCOSP.nc, NONE), \ 128 (histdayNMC.nc, ${R_OUT_ATM_O_D}/${PREFIX}_1D_histdayNMC.nc, NONE), \ 129 (histhf.nc, ${R_OUT_ATM_O_H}/${PREFIX}_HF_histhf.nc, NONE), \ 130 (histhfCOSP.nc, ${R_OUT_ATM_O_H}/${PREFIX}_HF_histhfCOSP.nc, NONE), \ 131 (histhfNMC.nc, ${R_OUT_ATM_O_H}/${PREFIX}_HF_histhfNMC.nc, NONE), \ 132 (histhf3h.nc, ${R_OUT_ATM_O_H}/${PREFIX}_3H_histhf3h.nc, NONE), \ 133 (histhf3hm.nc, ${R_OUT_ATM_O_H}/${PREFIX}_3H_histhf3hm.nc, NONE) 121 List= (histmth.nc, ${R_OUT_ATM_O_M}/${PREFIX}_1M_histmth.nc, Post_1M_histmth ) 134 122 135 123 [Post_1M_histmth] 136 124 Patches= () 137 125 GatherWithInternal = (lon, lat, presnivs, time_counter, time_centered, time_centered_bounds, aire) 138 TimeSeriesVars2D = (bils, cldh, cldl, cldm, cldq, cldt, evap, flat, ftime_con, iwp, lwp, LWdnSFC, LWdnSFCclr, LWupSFC , LWupSFCclr, LWdn200, LWdn200clr, LWup200, LWup200clr, precip, prw, pluc, psol, q2m, rh2m, sens, sicf, slp, snow, soll0, soll, sols0, sols, SWdnSFC, SWupSFC, SWup200, SWdnTOA, SWupTOA, SWdn200, SWdnSFCclr, SWupSFCclr, SWupTOAclr, t2m, ave_t2m_daily_max, ave_t2m_daily_min, taux, taux_ter, taux_sic, taux_lic, taux_oce, tauy, tauy_ter, tauy_sic, tauy_lic, tauy_oce, lat_ter, lat_sic, lat_lic, lat_oce, nettop, pbase, ptop, topl0, topl, tops0, tops, topswad, topswai, tsol, tsol_ter, tsol_lic, tsol_oce, tsol_sic , u10m, u500, v10m, v500, w500, pourc_ter, pourc_oce, pourc_sic, pourc_lic, wind10m, od550aer, od550lt1aer, od550_STRAT, loadoa, loadbc, loadso4, loaddust, loadss, sconcoa, sconcbc, sconcso4, sconcdust, sconcss, reffclwtop, cldncl, swtoaas_ant, swtoacs_ant, swtoacf_ant, swsrfas_ant, swsrfcs_ant, swsrfcf_ant, swtoaas_nat, swtoacs_nat, swtoacf_nat, swsrfas_nat, swsrfcs_nat, swsrfcf_nat, solswai, solswad, swtoacf_zero, swsrfcf_zero, R_ecc, R_peri, R_incl, solaire, rsun1, co2_ppm, CH4_ppb, N2O_ppb, CFC11_ppt, CFC12_ppt, colO3_strat, colO3_trop)139 ChunckJob2D = 100Y 126 TimeSeriesVars2D = (bils, cldh, cldl, cldm, cldq, cldt, evap, flat, ftime_con, iwp, lwp, LWdnSFC, LWdnSFCclr, LWupSFCclr, LWdn200, LWdn200clr, LWup200, LWup200clr, precip, prw, pluc, psol, q2m, rh2m, sens, sicf, slp, snow, soll0, soll, sols0, sols, SWdnSFC, SWupSFC, SWup200, SWdnTOA, SWupTOA, SWdn200, SWdnSFCclr, SWupSFCclr, SWupTOAclr, t2m, t2m_max, t2m_min, taux, taux_ter, taux_sic, taux_lic, taux_oce, tauy, tauy_ter, tauy_sic, tauy_lic, tauy_oce, lat_ter, lat_sic, lat_lic, lat_oce, nettop, pbase, ptop, topl0, topl, tops0, tops, topswad, topswai, tsol, tsol_ter, tsol_lic, tsol_oce, tsol_sic , u10m, u500, v10m, v500, w500, pourc_ter, pourc_oce, pourc_sic, pourc_lic, wind10m, od550aer, od550lt1aer, absvisaer, loadoa, loadbc, loadso4, loaddust, loadss, sconcoa, sconcbc, sconcso4, sconcdust, sconcss, reffclwtop, cldncl, swtoaas_ant, swtoacs_ant, swtoacf_ant, swsrfas_ant, swsrfcs_ant, swsrfcf_ant, swtoaas_nat, swtoacs_nat, swtoacf_nat, swsrfas_nat, swsrfcs_nat, swsrfcf_nat, solswai, solswad, swtoacf_zero, swsrfcf_zero) 127 ChunckJob2D = 100Y 140 128 TimeSeriesVars3D = (upwd, lwcon, iwcon, lcc3dcon, lcc3dstra, temp, theta, ovap, ovapinit, geop, vitu, vitv, vitw, pres, rneb, rnebcon, rhum, mc, paprs, scdnc, ec550aer, concoa, concbc, concso4, concss, concdust, reffclws, reffclwc, tnt, dtdyn, dtphy, dtlschr, tntr, tntscpbl, tnhus, dqdyn, dqvdf, tnhusscpbl, dqphy, evu, mcd) 141 129 ChunckJob3D = 100Y 142 130 Seasonal=ON 143 144 [Post_1M_histmthCOSP]145 Patches = ()146 GatherWithInternal = (lon, lat, pressure2, height, sza, time_counter, time_centered, time_centered_bounds, aire)147 TimeSeriesVars2D = (cllcalipso, clmcalipso, clhcalipso, cltcalipso, tclisccp, albisccp, ctpisccp)148 ChunckJob2D = OFF149 TimeSeriesVars3D = (clcalipso, clisccp2_c01, clisccp2_c02, clisccp2_c03, clisccp2_c04, clisccp2_c05, clisccp2_c06, clisccp2_c07, parasol_refl)150 ChunckJob3D = OFF151 Seasonal=OFF152 153 [Post_1M_histmthNMC]154 Patches = ()155 GatherWithInternal = (lon, lat, plev, time_counter, time_centered, time_centered_bounds)156 TimeSeriesVars2D = ()157 ChunckJob2D = NONE158 TimeSeriesVars3D = (ta, tro3, zg, hus, hur, ua, va, wap)159 ChunckJob3D = NONE160 Seasonal=ON161 162 [Post_1D_histday]163 Patches= ()164 GatherWithInternal = (lon, lat, presnivs, time_counter, time_centered, time_centered_bounds)165 TimeSeriesVars2D = (bils, cldh, cldl, cldm, cldq, cldt, evap, flat, precip, pluc, plul, prw, psol, q2m, sens, sicf, slp, soll, sols, snow, SWdnSFC, t2m, t2m_max, t2m_min, topl, tops, tsol, u10m, v10m, wind10m, wind10max)166 ChunckJob2D = 50Y167 TimeSeriesVars3D = (lwcon, iwcon, mc, rhum, rneb, temp, theta, ovap, geop, vitu, vitv, vitw, pres, paprs)168 ChunckJob3D = OFF169 Seasonal=OFF170 171 [Post_1D_histdayCOSP]172 Patches = ()173 GatherWithInternal = (lon, lat, pressure2, height, sza, time_counter, time_centered, time_centered_bounds)174 TimeSeriesVars2D = (cllcalipso, clmcalipso, clhcalipso, cltcalipso, tclisccp, albisccp, ctpisccp)175 ChunckJob2D = OFF176 TimeSeriesVars3D = (clcalipso, clisccp2_c01, clisccp2_c02, clisccp2_c03, clisccp2_c04, clisccp2_c05, clisccp2_c06, clisccp2_c07, parasol_refl)177 ChunckJob3D = OFF178 Seasonal=OFF179 180 [Post_1D_histdayNMC]181 Patches = ()182 GatherWithInternal = (lon, lat, plev, time_counter, time_centered, time_centered_bounds)183 TimeSeriesVars2D = ()184 ChunckJob2D = NONE185 TimeSeriesVars3D = (ta, zg, hus, hur, ua, va, wap)186 ChunckJob3D = 10Y187 Seasonal=OFF188 189 [Post_HF_histhf]190 Patches= ()191 GatherWithInternal = (lon, lat, presnivs, time_counter, time_centered, time_centered_bounds)192 TimeSeriesVars2D = (cldt, psol, q2m, slp, precip, pluc, plul, t2m, tsol, u10m, v10m)193 ChunckJob2D = 50Y194 TimeSeriesVars3D = (temp, theta, ovap, vitu, vitv)195 ChunckJob3D = OFF196 Seasonal=OFF197 198 [Post_HF_histhfCOSP]199 Patches = ()200 GatherWithInternal = (lon, lat, height, sza, time_counter, time_centered, time_centered_bounds)201 TimeSeriesVars2D = (cllcalipso, clmcalipso, clhcalipso, cltcalipso)202 ChunckJob2D = OFF203 TimeSeriesVars3D = (clcalipso, parasol_refl, cfad_lidarsr532_c01, cfad_lidarsr532_c02, cfad_lidarsr532_c03, cfad_lidarsr532_c04, cfad_lidarsr532_c05, cfad_lidarsr532_c06, cfad_lidarsr532_c07, cfad_lidarsr532_c08, cfad_lidarsr532_c09, cfad_lidarsr532_c10, cfad_lidarsr532_c11, cfad_lidarsr532_c12, cfad_lidarsr532_c13, cfad_lidarsr532_c14, cfad_lidarsr532_c15)204 ChunckJob3D = OFF205 Seasonal=OFF206 207 [Post_HF_histhfNMC]208 Patches = ()209 GatherWithInternal = (lon, lat, plev, time_counter, time_centered, time_centered_bounds)210 TimeSeriesVars2D = ()211 ChunckJob2D = NONE212 TimeSeriesVars3D = (ta, zg, hus, hur, ua, va, wap)213 ChunckJob3D = 10Y214 Seasonal=OFF215 216 [Post_3H_histhf3hm]217 Patches= ()218 GatherWithInternal = (lon, lat, presnivs, time_counter, time_centered, time_centered_bounds)219 TimeSeriesVars2D = (flat, precip, pluc, snow, topl, topl0, SWupTOA, SWupTOAclr, SWdnTOA, SWupSFC, SWupSFCclr, SWdnSFC, SWdnSFCclr, LWupSFC, LWupSFCclr, LWdnSFC, LWdnSFCclr, bils, bils_tke, bils_diss, bils_ec, bils_kinetic, bils_enthalp, bils_latent, sens, cldt, zmax_th)220 ChunckJob2D = OFF221 TimeSeriesVars3D = ()222 ChunckJob3D = OFF223 Seasonal=OFF224 225 [Post_3H_histhf3h]226 Patches= ()227 GatherWithInternal = (lon, lat, presnivs, time_counter, time_centered, time_centered_bounds)228 TimeSeriesVars2D = (phis, tsol, t2m, q2m, ustar, u10m, v10m, psol)229 ChunckJob2D = OFF230 TimeSeriesVars3D = ()231 ChunckJob3D = OFF232 Seasonal=OFF -
CONFIG/UNIFORM/v6/LMDZORINCA_v6.2/EXPERIMENTS/LMDZORINCA/GES_LR/COMP/orchidee.card
r5541 r6784 3 3 4 4 [UserChoices] 5 # The variable DefSuffix gives the suffix of the orchidee.def file to be used.6 # By default the file orchidee.def_Choi will be selected.7 # Sef DefSuffix=Choi (default) to activate default 2-layer Choisnel hydrology8 # Set DefSuffix=CWRR to activate 11-layer CWRR hydrology9 DefSuffix=CWRR10 11 # VEGET_UPDATE_at_start=y : orchidee.driver will set VEGET_UPDATE=1Y at the first cumul period when starting a new simulation.12 # After the first period, VEGET_UPDATE will be set according to the choice done below.13 VEGET_UPDATE_at_start=n14 15 5 # VEGET_UPDATE=0Y : default, do not update the vegetation and woodharvest file except if starting without restart file 16 6 # VEGET_UPDATE=1Y : update the vegetation and woodharvest file 1st of January each year 17 7 VEGET_UPDATE=1Y 8 9 10 # Choice for routing scheme. Set ROUTING below to have following parameters set in orchidee.def : 11 # ROUTING=standard => in orchidee.def RIVER_ROUTING=y and ROUTING_METHOD=standard 12 # ROUTING=simple => in orchidee.def RIVER_ROUTING=y and ROUTING_METHOD=simple 13 # ROUTING=off => in orchidee.def RIVER_ROUTING=n 14 ROUTING=standard 15 18 16 19 17 # Specify output level for output files … … 34 32 35 33 [InitialStateFiles] 36 List= (${R_IN}/SRF/soils_param.nc, . ), \ 34 List= (${R_IN}/SRF/SOIL/soils_param_zobler_coord.nc, soils_param.nc), \ 35 (${R_IN}/SRF/SOIL/soils_param_zobler_coord.nc, soilcolor.nc), \ 37 36 (${R_IN}/SRF/reftemp.nc, . ), \ 38 (${R_IN}/SRF/ routing.nc, . ), \37 (${R_IN}/SRF/ROUTING/routing.nc, . ), \ 39 38 (${R_IN}/SRF/albedo/alb_bg_modisopt_2D_ESA_v2.nc, alb_bg.nc ), \ 40 39 (${R_IN}/SRF/cartepente2d_15min.nc, .) … … 45 44 ListNonDel= () 46 45 46 # to decomment if we want to calcul bvoc - for this we need to activate CHEMISTRY_BVOC in orchidee.def_Choi 47 #ListNonDel= (${R_IN}/SRF/chemistry/orchidee_fertilizer_1995.nc, .), \ 48 # (${R_IN}/SRF/chemistry/orchidee_bbg_clim.nc, .) 49 47 50 [SmoothFiles] 48 51 List= () 49 52 50 53 [ParametersFiles] 51 List= (${SUBMIT_DIR}/PARAM/orchidee.def_ ${DefSuffix}, orchidee.def) ,\54 List= (${SUBMIT_DIR}/PARAM/orchidee.def_CWRR, orchidee.def) ,\ 52 55 (${MODIPSL}/modeles/ORCHIDEE/src_xml/file_def_orchidee.xml, .) ,\ 53 56 (${MODIPSL}/modeles/ORCHIDEE/src_xml/context_input_orchidee.xml, .) ,\ … … 59 62 60 63 [OutputText] 61 List= (out_orchidee , orchidee.def, used_orchidee.def, iodef.xml, context_orchidee.xml, field_def_orchidee.xml, file_def_orchidee.xml, file_def_input_orchidee.xml, river_desc.nc)64 List= (out_orchidee*, orchidee.def, used_orchidee.def, iodef.xml, context_orchidee.xml, context_input_orchidee.xml, field_def_orchidee.xml, file_def_orchidee.xml, river_desc.nc) 62 65 63 66 [OutputFiles] … … 66 69 (sechiba_out_2.nc, ${R_OUT_SRF_O_H}/${PREFIX}_HF_sechiba_out_2.nc, NONE) 67 70 68 69 71 [Post_1M_sechiba_history] 70 72 Patches = () 71 73 GatherWithInternal = (lon, lat, time_counter, Areas, Contfrac, time_centered, time_centered_bounds) 72 TimeSeriesVars2D = (nobiofrac, alb_nir, alb_vis, evap, fluxlat, fluxsens, netrad, qair, rain, runoff, snow, snownobio, snowf, frac_snow, subli, tair, temp_sol, tsol_max, tsol_min, drainage,mrsos, mrso, mrros, mrro, prveg, evspsblveg, evspsblsoi, tran, treeFrac, grassFrac, cropFrac, baresoilFrac, residualFrac, TWBR, riverflow, coastalflow, DelSoilMoist_daily, DelIntercept_daily, DelSWE_daily, delstock_routing , snowmelt, LAImean, transpir, evapnu)74 TimeSeriesVars2D = (nobiofrac, alb_nir, alb_vis, evap, fluxlat, fluxsens, netrad, qair, rain, runoff, snow, snownobio, snowf, frac_snow, subli, tair, temp_sol, tsol_max, tsol_min, drainage,mrsos, mrso, mrros, mrro, prveg, evspsblveg, evspsblsoi, tran, treeFrac, grassFrac, cropFrac, baresoilFrac, residualFrac, TWBR, riverflow, coastalflow, DelSoilMoist_daily, DelIntercept_daily, DelSWE_daily, delstock_routing_daily, snowmelt, LAImean, transpir, evapnu) 73 75 ChunckJob2D = NONE 74 76 TimeSeriesVars3D = (lai, maxvegetfrac, vegetfrac, ptn, nee) … … 84 86 ChunckJob3D = 10Y 85 87 Seasonal = OFF 88 -
CONFIG/UNIFORM/v6/LMDZORINCA_v6.2/EXPERIMENTS/LMDZORINCA/GES_LR/COMP/stomate.card
r5541 r6784 7 7 # Only the files stomate_history.nc and stomate_ipcc_history.nc can be set here. 8 8 # output_level_filname=0 : lowest level writing only variables needed for the monitoring 9 # output_level_filname=1 : highest level which will output all variables9 # output_level_filname=10 : highest level which will output all variables 10 10 # output_level_filname=NONE : deactivate the file 11 output_level_stomate_history = 1 11 output_level_stomate_history = 10 12 12 output_level_stomate_ipcc_history = 1 13 13 … … 41 41 (stomate_ipcc_history.nc, ${R_OUT_SBG_O_M}/${PREFIX}_1M_stomate_ipcc_history.nc, Post_1M_stomate_ipcc_history) 42 42 43 44 43 [Post_1M_stomate_history] 45 44 Patches = () -
CONFIG/UNIFORM/v6/LMDZORINCA_v6.2/EXPERIMENTS/LMDZORINCA/GES_LR/COMP/xios.card
r5541 r6784 15 15 16 16 [ParametersFiles] 17 List= ()17 List= (${SUBMIT_DIR}/PARAM/XIOS/iodef.xml, . ) 18 18 19 19 [RestartFiles] 20 List= 20 List= (NONE) 21 21 22 22 [OutputText] 23 List= (xios_client_*,out_xios.x.err.*, out_xios.x.out.*)23 List= (xios_client_*,out_xios.x.err, out_xios.x.out) 24 24 25 25 [OutputFiles] -
CONFIG/UNIFORM/v6/LMDZORINCA_v6.2/EXPERIMENTS/LMDZORINCA/GES_LR/config.card
r6580 r6784 13 13 #============================ 14 14 #D-- (<8 chars MAX for JobName) 15 JobName= LOI6run15 JobName=GESreg 16 16 SpaceName=PROD 17 17 ExperimentName=GES … … 28 28 DateEnd=2006-12-31 29 29 #============================ 30 #D-- 1Y, 1M, 5D, 1D31 PeriodLength=1 M30 #D-- 1Y, 1M, 5D, D 31 PeriodLength=1Y 32 32 #============================ 33 33 #-- Compression level for netcdf output files … … 61 61 Name=gcm.e 62 62 #D- For each component, Real name of executable, Name of executable for oasis 63 ATM= (gcm_${ResolAtm}_${OptMode}_${ConfChem}.e, gcm.e, 71MPI, 8OMP)63 ATM= (gcm_${ResolAtm}_${OptMode}_${ConfChem}.e, lmdz.x, 71MPI, 8OMP) 64 64 SRF= ("", "") 65 65 SBG= ("", "") … … 83 83 #D-- Post - 84 84 [Post] 85 #D- Activate Cesmep Atlas Comparison 86 Cesmep=FALSE 85 87 #D- Do we pack restart and debug txt files, this flag determines 86 88 #D- frequency of pack submission (use NONE for DRYRUN=3) -
CONFIG/UNIFORM/v6/LMDZORINCA_v6.2/EXPERIMENTS/LMDZORINCA/NAS_LR/COMP/inca.card
r6428 r6784 5 5 [UserChoices] 6 6 #choose if input file will be regrid by xios, or read without regrid with netcdf 7 xios_read= n7 xios_read=y 8 8 # Set LMDZ_10m_winds to choose if the simulation will use online 10m wind (=y) or offline (=n) 9 9 LMDZ_10m_winds=y … … 48 48 49 49 [BoundaryFiles] 50 List=(${R_IN}/CHM/IPCC_AR6/SFLX/VERS2/${RESOL_CHM}/ANT/sflx_lmdz_ANT_${year}_phy.nc, sflx_ANT.nc ),\ 51 (${R_IN}/CHM/IPCC_AR6/SFLX/VERS2/${RESOL_CHM}/BBG/sflx_lmdz_BBG_${year}_phy.nc, sflx_BBG.nc ),\ 52 (${R_IN}/CHM/IPCC_AR6/AIRCRAFT/${RESOL_CHM}/aircraft_${year}_phy.nc , aircraft_mth.nc ),\ 53 (${R_IN}/CHM/IPCC_AR6/SAD/${RESOL_CHM}/sad_cmip6_${year}.nc , sad.nc ) 50 List=(${R_IN}/CHM/IPCC_AR6/AIRCRAFT/${RESOL_CHM}/aircraft_${year}_phy.nc , aircraft_mth.nc ),\ 51 (${R_IN}/CHM/IPCC_AR6/SFLX/VERS3/144142-L79/ANT/sflx_lmdz_ANT_${year}_dyn.nc , sflx_ANT_LR.nc ),\ 52 (${R_IN}/CHM/IPCC_AR6/SFLX/VERS3/144142-L79/BBG/sflx_lmdz_BBG_${year}_dyn.nc , sflx_BBG_LR.nc ) 54 53 55 54 56 ListNonDel= (${R_IN}/CHM/INCA${RESOL_CHM}/npp.nc , npp.nc )\ 57 (${R_IN}/CHM/INCA${RESOL_CHM}/STRAT/o3coeff_lmdz_phy.nc , o3lin.nc )\ 58 (${R_IN}/CHM/IPCC_AR6/lglived_CMIP6.dat , lglived.dat )\ 59 (${R_IN}/CHM/IPCC_AR6/SFLX/VERS2/${RESOL_CHM}/sflx_lmdz_GHG.nc , sflx_GHG.nc )\ 60 (${R_IN}/CHM/IPCC_AR6/SFLX/VERS2/${RESOL_CHM}/sflx_lmdz_MISC.nc , sflx_MISC.nc )\ 61 (${R_IN}/CHM/IPCC_AR6/SFLX/VERS2/${RESOL_CHM}/sflx_lmdz_NAT.nc , sflx_NAT.nc )\ 62 (${R_IN}/CHM/INCA${RESOL_CHM}/STRAT/hikari_sc0_lmdz_phy.nc , aircraft_hs.nc )\ 63 (${R_IN}/CHM/INCA${RESOL_CHM}/landuse.nc , landuse.nc )\ 64 (${R_IN}/CHM/INCA${RESOL_CHM}/rhvEC.txt , rhvEC.txt )\ 65 (${R_IN}/CHM/INCA${RESOL_CHM}/wthEC.txt , wthEC.txt )\ 66 (${R_IN}/CHM/INCA${RESOL_CHM}/clyEC.txt , clyEC.txt )\ 67 (${R_IN}/CHM/INCA${RESOL_CHM}/wth.dat , wth.dat )\ 68 (${R_IN}/CHM/INCA${RESOL_CHM}/cly.dat , cly.dat )\ 69 (${R_IN}/CHM/INCA${RESOL_CHM}/rhv.dat , rhv.dat )\ 70 (${R_IN}/CHM/INCA${RESOL_CHM}/new_phototable.dat , phototable.dat ) 55 ListNonDel= (${R_IN}/CHM/FILES_LONxLAT/landuse_lmdz_dyn.nc , landuse.nc ),\ 56 (${R_IN}/CHM/FILES_LONxLAT/npp_dyn.nc , npp.nc ),\ 57 (${R_IN}/CHM/INCA${RESOL_CHM}/STRAT/o3coeff_lmdz_phy.nc , o3lin.nc ),\ 58 (${R_IN}/CHM/FILES_LONxLAT/sad_dyn.nc , sad.nc ),\ 59 (${R_IN}/CHM/IPCC_AR6/lglived_CMIP6.dat , lglived.dat ),\ 60 (${R_IN}/CHM/IPCC_AR6/SFLX/VERS3/144142-L79/sflx_lmdz_GHG_dyn.nc , sflx_GHG_LR.nc ),\ 61 (${R_IN}/CHM/IPCC_AR6/SFLX/VERS3/144142-L79/sflx_lmdz_NAT_dyn.nc , sflx_NAT_LR.nc ),\ 62 (${R_IN}/CHM/IPCC_AR6/SFLX/VERS3/144142-L79/sflx_lmdz_MISC_dyn.nc , sflx_MISC_LR.nc),\ 63 (${R_IN}/CHM/INCA${RESOL_CHM}/STRAT/hikari_sc0_lmdz_phy.nc , aircraft_hs.nc ),\ 64 (${R_IN}/CHM/FILES_LONxLAT/dustincaEC.nc , dustEC.nc ),\ 65 (${R_IN}/CHM/INCA${RESOL_CHM}/new_phototable.dat , phototable.dat ) 71 66 72 67 … … 74 69 List= (${SUBMIT_DIR}/PARAM/inca.def , . ),\ 75 70 (${MODIPSL}/modeles/INCA/src/INCA_XML/context_inca.xml , . ),\ 71 (${MODIPSL}/modeles/INCA/src/INCA_XML/context_input_inca.xml, .) ,\ 72 (${MODIPSL}/modeles/INCA/src/INCA_XML/context_sflx_inca.xml, .) ,\ 73 (${MODIPSL}/modeles/INCA/src/INCA_XML/context_dust_inca.xml, .) ,\ 74 (${MODIPSL}/modeles/INCA/src/INCA_XML/context_sad_inca.xml , .),\ 75 (${MODIPSL}/modeles/INCA/src/INCA_XML/context_start_NAS_inca.xml, context_start_inca.xml) ,\ 76 76 (${MODIPSL}/modeles/INCA/src/INCA_XML/field_def_inca.xml , . ),\ 77 77 (${MODIPSL}/modeles/INCA/src/INCA_XML/file_def_inca_restart.xml , file_def_inca_restart.xml ), \ … … 113 113 (inca1mo_veget.nc , ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_veget.nc , NONE ),\ 114 114 (aerosols_from_inca.nc , ${R_OUT_CHM_O_M}/${PREFIX}_1M_aerosols_from_inca.nc, NONE ),\ 115 (inca_oxydants.nc , ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_oxydants.nc , NONE ),\ 116 (mmr_ce0l_ico.nc , ${R_OUT_CHM_O_D}/${PREFIX}_1D_mmr_ce0l_ico.nc , NONE) 115 (inca_oxydants.nc , ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_oxydants.nc , NONE ) 117 116 118 117 -
CONFIG/UNIFORM/v6/LMDZORINCA_v6.2/EXPERIMENTS/LMDZORINCA/NAS_LR/COMP/lmdz.card
r6561 r6784 27 27 # The parameter file PARAM/config.def_$ConfType will be used. 28 28 # ConfType=preind/actuel/annuel 29 ConfType=a ctuel29 ConfType=annuel 30 30 31 31 # manage radiative aerosol effect and ozone … … 70 70 71 71 [BoundaryFiles] 72 List= (${R_IN}/ATM/LIMIT/AMIP.v20180427/interpol/${RESOL_ATM_XY}_eORCA1.2_gregorian/limit_${year}.nc, limit.nc),\72 List= (${R_IN}/ATM/LIMIT/ERA5.as1e5/interpol/144x142_eORCA1.2_gregorian/limit_${year}.nc, limit.nc),\ 73 73 (${R_IN}/ATM/OZONE/UReading/historical.v20160711.v2/interpol/${RESOL_ATM_XY}/climoz_LMDZ_${year}.nc, climoz_LMDZ.nc),\ 74 74 (${R_IN}/ATM/SOLAR/CMIP6/v3.1corr/Historical/solarforcing_v3.1_daily_6bands_${year}.nc, solarforcing.nc),\ … … 77 77 78 78 79 ListNonDel= () 80 81 #ListNonDel= (${R_IN}/ATM/GHG/CMIP6/historical/CO2_CMIP6_0000_2014.txt, CO2.txt),\ 82 # (${R_IN}/ATM/GHG/CMIP6/historical/CH4_CMIP6_0000_2014.txt, CH4.txt),\ 83 # (${R_IN}/ATM/GHG/CMIP6/historical/N2O_CMIP6_0000_2014.txt, N2O.txt),\ 84 # (${R_IN}/ATM/GHG/CMIP6/historical/CFC11eq_CMIP6_0000_2014.txt, CFC11.txt),\ 85 # (${R_IN}/ATM/GHG/CMIP6/historical/CFC12eq_CMIP6_0000_2014.txt, CFC12.txt) 86 # 87 79 ListNonDel= (${R_IN}/ATM/GHG/CMIP6/historical/CO2_CMIP6_0000_2014.txt, CO2.txt),\ 80 (${R_IN}/ATM/GHG/CMIP6/historical/CH4_CMIP6_0000_2014.txt, CH4.txt),\ 81 (${R_IN}/ATM/GHG/CMIP6/historical/N2O_CMIP6_0000_2014.txt, N2O.txt),\ 82 (${R_IN}/ATM/GHG/CMIP6/historical/CFC11eq_CMIP6_0000_2014.txt, CFC11.txt),\ 83 (${R_IN}/ATM/GHG/CMIP6/historical/CFC12eq_CMIP6_0000_2014.txt, CFC12.txt) 88 84 89 85 [ParametersFiles] 90 86 List= (${SUBMIT_DIR}/PARAM/physiq.def_${LMDZ_Physics}, physiq.def), \ 91 (${SUBMIT_DIR}/PARAM/gcm.def_${RESOL_ATM_XY}_${LMDZ_Physics}, gcm.def),\87 (${SUBMIT_DIR}/PARAM/gcm.def_${RESOL_ATM_XY}_${LMDZ_Physics}, gcm.def),\ 92 88 (${SUBMIT_DIR}/PARAM/vert.def_L${RESOL_ATM_Z}, vert.def), \ 93 89 (${MODIPSL}/modeles/LMDZ/DefLists/cosp_input_nl.txt, .), \ … … 96 92 (${SUBMIT_DIR}/PARAM/guide.def, .), \ 97 93 (${SUBMIT_DIR}/PARAM/run.def, .), \ 98 (${SUBMIT_DIR}/PARAM/iodef.xml, . ), \99 94 (${MODIPSL}/bin/tracer_${ConfChem}.def, tracer.def), \ 100 95 (${MODIPSL}/modeles/LMDZ/DefLists/context_lmdz.xml, . ), \ … … 121 116 122 117 [OutputText] 123 List= (physiq.def, gcm.def, vert.def, run.def, trace ur.def, guide.def, config.def, used_run.def, iodef.xml, context_lmdz.xml, field_def_lmdz.xml, file_def_*lmdz.xml, debug.01, lmdz.prt, out_gcm.e.err, out_gcm.e.out)118 List= (physiq.def, gcm.def, vert.def, run.def, tracer.def, guide.def, config.def, used_run.def, iodef.xml, context_lmdz.xml, field_def_lmdz.xml, file_def_*lmdz.xml, debug.01, lmdz.prt, out_lmdz.x.err, out_lmdz.x.out) 124 119 125 120 [OutputFiles] -
CONFIG/UNIFORM/v6/LMDZORINCA_v6.2/EXPERIMENTS/LMDZORINCA/NAS_LR/COMP/orchidee.card
r5638 r6784 3 3 4 4 [UserChoices] 5 # The variable DefSuffix gives the suffix of the orchidee.def file to be used.6 # By default the file orchidee.def_Choi will be selected.7 # Sef DefSuffix=Choi (default) to activate default 2-layer Choisnel hydrology8 # Set DefSuffix=CWRR to activate 11-layer CWRR hydrology9 DefSuffix=CWRR10 11 # VEGET_UPDATE_at_start=y : orchidee.driver will set VEGET_UPDATE=1Y at the first cumul period when starting a new simulation.12 # After the first period, VEGET_UPDATE will be set according to the choice done below.13 VEGET_UPDATE_at_start=n14 15 5 # VEGET_UPDATE=0Y : default, do not update the vegetation and woodharvest file except if starting without restart file 16 6 # VEGET_UPDATE=1Y : update the vegetation and woodharvest file 1st of January each year 17 7 VEGET_UPDATE=1Y 8 9 10 # Choice for routing scheme. Set ROUTING below to have following parameters set in orchidee.def : 11 # ROUTING=standard => in orchidee.def RIVER_ROUTING=y and ROUTING_METHOD=standard 12 # ROUTING=simple => in orchidee.def RIVER_ROUTING=y and ROUTING_METHOD=simple 13 # ROUTING=off => in orchidee.def RIVER_ROUTING=n 14 ROUTING=standard 18 15 19 16 … … 35 32 36 33 [InitialStateFiles] 37 List= (${R_IN}/SRF/soils_param.nc, . ), \ 34 List= (${R_IN}/SRF/SOIL/soils_param_zobler_coord.nc, soils_param.nc), \ 35 (${R_IN}/SRF/SOIL/soils_param_zobler_coord.nc, soilcolor.nc), \ 38 36 (${R_IN}/SRF/reftemp.nc, . ), \ 39 (${R_IN}/SRF/ routing.nc, . ), \37 (${R_IN}/SRF/ROUTING/routing.nc, . ), \ 40 38 (${R_IN}/SRF/albedo/alb_bg_modisopt_2D_ESA_v2.nc, alb_bg.nc ), \ 41 39 (${R_IN}/SRF/cartepente2d_15min.nc, .) … … 45 43 (${R_IN}/SRF/WOODHARVEST/LUH2v2/historical/woodharvest_${year}.nc, woodharvest.nc) 46 44 ListNonDel= () 47 48 45 49 46 # to decomment if we want to calcul bvoc - for this we need to activate CHEMISTRY_BVOC in orchidee.def_Choi … … 55 52 56 53 [ParametersFiles] 57 List= (${SUBMIT_DIR}/PARAM/orchidee.def_ ${DefSuffix}, orchidee.def) ,\54 List= (${SUBMIT_DIR}/PARAM/orchidee.def_CWRR, orchidee.def) ,\ 58 55 (${MODIPSL}/modeles/ORCHIDEE/src_xml/file_def_orchidee.xml, .) ,\ 59 56 (${MODIPSL}/modeles/ORCHIDEE/src_xml/context_input_orchidee.xml, .) ,\ … … 65 62 66 63 [OutputText] 67 List= (out_orchidee , orchidee.def, used_orchidee.def, iodef.xml, context_orchidee.xml, field_def_orchidee.xml, file_def_orchidee.xml, river_desc.nc, file_def_input_orchidee.xml)64 List= (out_orchidee*, orchidee.def, used_orchidee.def, iodef.xml, context_orchidee.xml, context_input_orchidee.xml, field_def_orchidee.xml, file_def_orchidee.xml, river_desc.nc) 68 65 69 66 [OutputFiles] … … 75 72 Patches = () 76 73 GatherWithInternal = (lon, lat, time_counter, Areas, Contfrac, time_centered, time_centered_bounds) 77 TimeSeriesVars2D = (nobiofrac, alb_nir, alb_vis, evap, fluxlat, fluxsens, netrad, qair, rain, runoff, snow, snownobio, snowf, frac_snow, subli, tair, temp_sol, tsol_max, tsol_min, drainage,mrsos, mrso, mrros, mrro, prveg, evspsblveg, evspsblsoi, tran, treeFrac, grassFrac, cropFrac, baresoilFrac, residualFrac, TWBR, riverflow, coastalflow, DelSoilMoist_daily, DelIntercept_daily, DelSWE_daily, delstock_routing , snowmelt, LAImean, transpir, evapnu)74 TimeSeriesVars2D = (nobiofrac, alb_nir, alb_vis, evap, fluxlat, fluxsens, netrad, qair, rain, runoff, snow, snownobio, snowf, frac_snow, subli, tair, temp_sol, tsol_max, tsol_min, drainage,mrsos, mrso, mrros, mrro, prveg, evspsblveg, evspsblsoi, tran, treeFrac, grassFrac, cropFrac, baresoilFrac, residualFrac, TWBR, riverflow, coastalflow, DelSoilMoist_daily, DelIntercept_daily, DelSWE_daily, delstock_routing_daily, snowmelt, LAImean, transpir, evapnu) 78 75 ChunckJob2D = NONE 79 76 TimeSeriesVars3D = (lai, maxvegetfrac, vegetfrac, ptn, nee) -
CONFIG/UNIFORM/v6/LMDZORINCA_v6.2/EXPERIMENTS/LMDZORINCA/NAS_LR/COMP/stomate.card
r5638 r6784 9 9 # output_level_filname=10 : highest level which will output all variables 10 10 # output_level_filname=NONE : deactivate the file 11 output_level_stomate_history = 1 11 output_level_stomate_history = 10 12 12 output_level_stomate_ipcc_history = 1 13 13 … … 22 22 23 23 [BoundaryFiles] 24 List= 24 List= () 25 25 ListNonDel= () 26 26 27 27 [SmoothFiles] 28 List= 28 List= () 29 29 30 30 [ParametersFiles] … … 32 32 33 33 [RestartFiles] 34 List= 34 List= (stomate_rest_out.nc, stomate_rest.nc, stomate_rest_in.nc) 35 35 36 36 [OutputText] … … 48 48 TimeSeriesVars3D = (LAI,VEGET_COV_MAX,NPP,GPP,HET_RESP,MAINT_RESP,GROWTH_RESP,AGE,HEIGHT,TOTAL_M,TOTAL_BM_LITTER,TOTAL_SOIL_CARB,CO2_FIRE,TOTAL_TURN,WOOD_HARVEST_PFT) 49 49 ChunckJob3D = NONE 50 Seasonal =ON50 Seasonal = ON 51 51 52 52 [Post_1M_stomate_ipcc_history] … … 55 55 TimeSeriesVars2D = (cVeg, cLitter, cSoil, cProduct, lai, gpp, ra, npp, rh, fFire, fHarvest, fLuc, nbp, fVegLitter, fLitterSoil, cLeaf, cWood, cRoot, cMisc, cLitterAbove, cLitterBelow, cSoilFast, cSoilMedium, cSoilSlow, landCoverFrac, treeFracPrimDec, treeFracPrimEver, c3PftFrac, c4PftFrac, rGrowth, rMaint, nppLeaf, nppWood, nppRoot, nep, fWoodharvest) 56 56 ChunckJob2D = NONE 57 TimeSeriesVars3D =()57 TimeSeriesVars3D = () 58 58 ChunckJob3D = NONE 59 Seasonal =ON59 Seasonal = ON -
CONFIG/UNIFORM/v6/LMDZORINCA_v6.2/EXPERIMENTS/LMDZORINCA/NAS_LR/COMP/xios.card
r5638 r6784 15 15 16 16 [ParametersFiles] 17 List= ()17 List= (${SUBMIT_DIR}/PARAM/XIOS/iodef.xml, . ) 18 18 19 19 [RestartFiles] 20 List= 20 List= (NONE) 21 21 22 22 [OutputText] 23 List= (xios_client_*,out_xios.x.err.*, out_xios.x.out.*)23 List= (xios_client_*,out_xios.x.err, out_xios.x.out) 24 24 25 25 [OutputFiles] -
CONFIG/UNIFORM/v6/LMDZORINCA_v6.2/EXPERIMENTS/LMDZORINCA/NAS_LR/config.card
r6580 r6784 13 13 #============================ 14 14 #D-- (<8 chars MAX for JobName) 15 JobName=NAS LR16 SpaceName= DEVT15 JobName=NASreg 16 SpaceName=PROD 17 17 ExperimentName=NMHC_AER_S 18 18 LongName='nouvelles configs + LMDZ5 INCA5 39 + Xios + possibilite nouvelle physique ' … … 29 29 #============================ 30 30 #D-- 1Y, 1M, 5D, 1D 31 PeriodLength=1 M31 PeriodLength=1Y 32 32 #============================ 33 33 #-- Compression level for netcdf output files … … 61 61 Name=gcm.e 62 62 #D- For each component, Real name of executable, Name of executable for oasis 63 ATM= (gcm_${ResolAtm}_${OptMode}_${ConfChem}.e, gcm.e, 71MPI, 8OMP)63 ATM= (gcm_${ResolAtm}_${OptMode}_${ConfChem}.e, lmdz.x, 71MPI, 8OMP) 64 64 SRF= ("", "") 65 65 SBG= ("", "") … … 67 67 IOS= (xios_server_${OptMode}.exe, xios.x, 1MPI) 68 68 69 #======================================================================= =69 #======================================================================= 70 70 #D-- Restarts - 71 71 [Restarts] … … 73 73 OverRule=n 74 74 #D- Last day of the experience used as restart 75 RestartDate=20 05-12-3175 RestartDate=2014-12-31 76 76 #D- Define restart simulation name (=> JOB_OS) 77 RestartJobName= LOI_AR5WERF_E0_200677 RestartJobName=Rescaled-79-washout 78 78 #D- Path Server Group Login (=> PSGL) 79 RestartPath= /ccc/work/cont003/dsm/p24cozic/INPUT_INCA/IGCM_OUT/LMDZORINCA/NMHC_AER79 RestartPath=${R_IN}/RESTART/LMDZORINCA/DEVT/NMHC_AER_S 80 80 # Attention login depend de la machine 81 81 … … 83 83 #D-- Post - 84 84 [Post] 85 #D- Activate Cesmep Atlas Comparison 86 Cesmep=FALSE 85 87 #D- Do we pack restart and debug txt files, this flag determines 86 88 #D- frequency of pack submission (use NONE for DRYRUN=3) … … 99 101 #D-- ATM - 100 102 [ATM] 101 # If config_Restarts_OverRule == 'n' all params are read 102 Restart= n 103 # Last day of the experience used as restart 104 RestartDate=2000-01-01 105 # Define restart simulation name 106 RestartJobName=JobName 107 RestartPath=${ARCHIVE}/IGCM_OUT/LMDZORINCA/NMHC_AER 103 # If config_Restarts_OverRule == 'n' next 4 params are read 104 Restart=y 105 #D- Last day of the experience used as restart for all components 106 RestartDate=2014-12-31 107 #D- Define restart simulation name for all components 108 RestartJobName=Rescaled-79-washout 109 #D- Path Server Group Login 110 RestartPath=${R_IN}/RESTART/LMDZORINCA/DEVT/NMHC_AER_S 108 111 109 112 #======================================================================== … … 133 136 [CHM] 134 137 # If config_Restarts_OverRule == 'n' next 4 params are read 135 Restart=n 136 #D-- Last day of the experience used as restart 137 RestartDate=2000-01-01 138 #D-- Define restart simulation name 139 RestartJobName=JobName 140 RestartPath=${ARCHIVE}/IGCM_OUT/LMDZORINCA/NMHC_AER 138 Restart=y 139 #D- Last day of the experience used as restart for all components 140 RestartDate=2014-12-31 141 #D- Define restart simulation name for all components 142 RestartJobName=Rescaled-79-washout 143 #D- Path Server Group Login 144 RestartPath=${R_IN}/RESTART/LMDZORINCA/DEVT/NMHC_AER_S 141 145 142 146 #========================================================================
Note: See TracChangeset
for help on using the changeset viewer.