#- $Id: lmdz.card 70 2007-06-21 14:20:42Z acosce $
[Compatibility]
libIGCM=1.0

[UserChoices]
# Physics package to use : 
# AP for standard/old physics(defalut), can be used with LMDZ4_AR5 or LMDZ5/trunk sources 
# NPv3.1 for new physics, to be used with LMDZ5/trunk revision 1554 or later
LMDZ_Physics=AP
#LMDZ_Physics=NPv3.1
#LMDZ_Physics=NPv3.2

# Use XIOS as output library
XIOS=y

# Set the variable CREATE needed further below to find the initial and boundary condition files.
CREATE=ELC-${RESOL_ATM_3D}

# ByPass_hgardfou_teta=y : modify teta_ parameters for following CumulPeriod only
ByPass_hgardfou_teta=n

# ByPass_hgardfou_mats=y : set parameter purmats=y for following CumulPeriod only
ByPass_hgardfou_mats=n

# Number of periods where to set parameter adjust=y before switching to adjust=n
# For adjust=n, set LMDZ_NbPeriod_ajust=0. 
LMDZ_NbPeriod_adjust=0
# LMDZ_NbPeriod_adjust=0
# To force usage of this Bands file, put LMDZ_NbPeriod_adjust=0 and replace XXXXXXX by Restart Job Name
#LMDZ_Bands_file_name=/ccc/store/cont003/dsm/p86cozic/IGCM_OUT/LMDZORINCA/NMHC_AER/L4OI3NA_39_Bands/ATM/Debug/L4OI3NA_39_Bands_Bands_96x95x39_32prc.dat_1

# Set ConfType to choose parameters for aerosols, solar and green house gazes. 
# The parameter file PARAM/config.def_$ConfType will be used.
# ConfType=preind/actuel/annuel
ConfType=actuel

# manage radiative aerosol effect and ozone 
flag_aerosol=6
ok_ade=y
ok_aie=n
aerosol_couple=y
read_climoz=0
ok_cdnc=y

# Set OutLevel to choose the level of output files from LMDZ. The file PARAM/output.def_$OutLevel will be used.
# OutLevel=low/medium/high
OutLevel=low

# Set COSP activation and Outputs frequency (monthly, daily, HF) = y/n
LMDZ_COSP_OK=n
LMDZ_COSP_monthly=n
LMDZ_COSP_daily=n
LMDZ_COSP_hf=n

# Set NMC Outputs frequency (monthly, daily, HF) = y/n
LMDZ_NMC_monthly=n
LMDZ_NMC_daily=n
LMDZ_NMC_hf=n


# Nugding : ok_guide=y/n
# If ok_guide=y, add nudging files(u.nc, v.nc, hur.nc,...) in BoundaryFiles section below.
ok_guide=n


[InitialStateFiles]
# start and startphy are the clim files computed with CLIM_CREATE (create_etat0_limit) job
List= 	(${R_IN}/CHM/INCA${RESOL_CHM}/start.nc	, start.nc	) \
	(${R_IN}/CHM/INCA${RESOL_CHM}/startphy.nc	, startphy.nc	)


[BoundaryFiles]
List=   (${R_IN}/ATM/${RESOL_ATM}/LIMIT/ERAI/leap/limit_${year}.nc , limit.nc)

#	(${R_IN}/ATM/${RESOL_ATM}/NUDGE_FILES/ERAI/AN${year}/u_ecmwf_${year}${month}.nc 	, u.nc		),\
#	(${R_IN}/ATM/${RESOL_ATM}/NUDGE_FILES/ERAI/AN${year}/v_ecmwf_${year}${month}.nc 	, v.nc		)
 
ListNonDel= ()

[ParametersFiles]
List=	(${SUBMIT_DIR}/PARAM/physiq.def_L${RESOL_ATM_Z}_${LMDZ_Physics}, physiq.def), \
	(${SUBMIT_DIR}/PARAM/gcm.def_${RESOL_ATM_3D},    gcm.def),    \
	(${SUBMIT_DIR}/PARAM/cosp_input_nl.txt,                .),    \
	(${SUBMIT_DIR}/PARAM/cosp_output_nl.txt,               .),    \
	(${SUBMIT_DIR}/PARAM/output.def_${OutLevel},  output.def),    \
	(${SUBMIT_DIR}/PARAM/config.def_${ConfType},  config.def),    \
	(${SUBMIT_DIR}/PARAM/guide.def, .), \
	(${SUBMIT_DIR}/PARAM/run.def, .), \
	(${SUBMIT_DIR}/PARAM/traceur.def, .), \
	(${SUBMIT_DIR}/PARAM/iodef.xml, . ),\
	(${MODIPSL}/modeles/LMDZ/DefLists/context_lmdz.xml, . )            ,\
	(${MODIPSL}/modeles/LMDZ/DefLists/field_def_lmdz.xml, . )          ,\
	(${MODIPSL}/modeles/LMDZ/DefLists/file_def_histday_lmdz.xml, . )   ,\
	(${MODIPSL}/modeles/LMDZ/DefLists/file_def_histhf_lmdz.xml, . )    ,\
	(${MODIPSL}/modeles/LMDZ/DefLists/file_def_histins_lmdz.xml, . )   ,\
	(${MODIPSL}/modeles/LMDZ/DefLists/file_def_histLES_lmdz.xml, . )   ,\
	(${MODIPSL}/modeles/LMDZ/DefLists/file_def_histmth_lmdz.xml, . )   ,\
	(${MODIPSL}/modeles/LMDZ/DefLists/file_def_histstn_lmdz.xml, . )   ,\
	(${MODIPSL}/modeles/LMDZ/DefLists/file_def_histmthNMC_lmdz.xml, . ),\
	(${MODIPSL}/modeles/LMDZ/DefLists/file_def_histdayNMC_lmdz.xml, . ),\
 	(${MODIPSL}/modeles/LMDZ/DefLists/file_def_histhfNMC_lmdz.xml, . ),\
 	(${MODIPSL}/modeles/LMDZ/DefLists/file_def_histmthCOSP_lmdz.xml, . ),\
 	(${MODIPSL}/modeles/LMDZ/DefLists/file_def_histdayCOSP_lmdz.xml, . ),\
 	(${MODIPSL}/modeles/LMDZ/DefLists/file_def_histhfCOSP_lmdz.xml, . )

[RestartFiles]
List=	(restart.nc, restart.nc, start.nc), \
	(restartphy.nc, restartphy.nc,  startphy.nc) 

[OutputText]
List=   (physiq.def, gcm.def, run.def, traceur.def, guide.def, config.def, used_run.def, iodef.xml, context_lmdz.xml,field_def_lmdz.xml)

[OutputFiles]
List=	(histmth.nc,      ${R_OUT_ATM_O_M}/${PREFIX}_1M_histmth.nc,   Post_1M_histmth   )	

[Post_1M_histmth]
Patches= ()
GatherWithInternal = (lon, lat, presnivs, time_counter, time_counter_bounds, aire)
TimeSeriesVars2D = (bils, cldh, cldl, cldm, cldq, cldt, evap, iwp, lwp, LWdnSFC, LWdnSFCclr, LWupSFCclr, LWdn200, LWdn200clr, LWup200, LWup200clr, precip, prw, pluc, psol, q2m, sens, sicf, slp, snow, soll0, soll, sols0, sols, SWdnSFC, SWupSFC, SWup200, SWdnTOA, SWupTOA, SWdn200, SWdnSFCclr, SWupSFCclr, SWupTOAclr, t2m, t2m_max, t2m_min, taux_ter, taux_sic, taux_lic, taux_oce, tauy_ter, tauy_sic, tauy_lic, tauy_oce, lat_ter, lat_sic, lat_lic, lat_oce, topl0, topl, tops0, tops, topswad, topswai, tsol, tsol_ter, tsol_lic, tsol_oce, tsol_sic , u10m, u500, v10m, v500, w500, pourc_ter, pourc_oce, pourc_sic, pourc_lic)
ChunckJob2D = NONE
TimeSeriesVars3D = ()
ChunckJob3D = NONE