#- $Id$
#-
#- Key options for OPA ocean model + UCL sea ice model : ORCA_R4 - Coupled
#-
#--- -Wp,-Dkey_orca_r4                    resolution option(4,2,05,025)
#--- -Wp,-Dkey_ice_lln                    + use the Louvain La Neuve sea ice model
#--- -Wp,-Dkey_freesurf_cstvol            Free surface formulation
#--- -Wp,-Dkey_zdftke                     tke 1.5 turbulent closure scheme   
#--- -Wp,-Dkey_flxqsr                     + solar radiation penetration 
#--- -Wp,-Dkey_trahdfiso         tracer   diffusion along neutral surfaces    
#--- -Wp,-Dkey_trahdfcoef2d      tracer   latitude and longitude dependent coef.
#--- -Wp,-Dkey_dynhdfcoef3d      dynamic  latitude and longitude dependent coef. 
#--- -Wp,-Dkey_trahdfeiv                  eddy induced advection 
#--- -Wp,-Dkey_convevd                    + enhanced vertical diffusion         
#--- -Wp,-Dkey_temdta                     temperature data file (Levitus)
#--- -Wp,-Dkey_saldta                     salinity data file    (Levitus)  
#--- -Wp,-Dkey_saldta_monthly              + salinity data file (Levitus monthly)
#--- -Wp,-Dkey_diaznl                     Diagnostics: zonal fluxes
#--- -Wp,-Dkey_diahth                     Diagnostics: thermocline depth, 
#-                                        and depth of the 20 degrees isotherm
#--- -Wp,-Dkey_diaeiv                     Diagnostics: Eddy induced velocities
#--- -Wp,-Dkey_monotasking                monotasking option 
#--- -Wp,-Dkey_coupled                    coupled version - Boundary conditions: 
#-                                        momentum, heat and fresh water fluxes (coupled) 
#--- -Wp,-Dkey_coupled_prism              coupled version with OASIS3
#-
KEY4='-Wp,-Dkey_orca_r4 -Wp,-Dkey_ice_lln -Wp,-Dkey_freesurf_cstvol -Wp,-Dkey_zdftke -Wp,-Dkey_flxqsr -Wp,-Dkey_trahdfiso -Wp,-Dkey_trahdfcoef2d -Wp,-Dkey_dynhdfcoef3d -Wp,-Dkey_trahdfeiv -Wp,-Dkey_convevd -Wp,-Dkey_temdta -Wp,-Dkey_saldta -Wp,-Dkey_saldta_monthly -Wp,-Dkey_diaznl -Wp,-Dkey_diahth -Wp,-Dkey_diaeiv -Wp,-Dkey_monotasking -Wp,-Dkey_coupled -Wp,-Dkey_coupled_prism -Wp,-Dkey_coupled_ipslcm4 -Wp,-Dkey_lim_fdd -Wp,-Dkey_lim_cp2'
KEY2='-Wp,-Dkey_orca_r2 -Wp,-Dkey_ice_lln -Wp,-Dkey_freesurf_cstvol -Wp,-Dkey_zdftke -Wp,-Dkey_flxqsr -Wp,-Dkey_trahdfiso -Wp,-Dkey_trahdfcoef2d -Wp,-Dkey_dynhdfcoef3d -Wp,-Dkey_trahdfeiv -Wp,-Dkey_convevd -Wp,-Dkey_temdta -Wp,-Dkey_saldta -Wp,-Dkey_saldta_monthly -Wp,-Dkey_diaznl -Wp,-Dkey_diahth -Wp,-Dkey_diaeiv -Wp,-Dkey_monotasking -Wp,-Dkey_coupled -Wp,-Dkey_coupled_prism -Wp,-Dkey_coupled_ipslcm4 -Wp,-Dkey_lim_fdd -Wp,-Dkey_lim_cp2'
PRISM_DIR = ../../prism
OASIS3_DIR = $(PRISM_DIR)/src/mod/oasis3

#-Q- sx8brodie sx8brodie:
#-Q- sx8brodie 	@echo sur le NEC SX-8 brodie la compilation se fait en batch
#-Q- sx8brodie 	@echo attendez la fin du job soumis la:
#-Q- sx8brodie 	qsub job.comp

all : 
	if [ -s ./.resol ] ; then gmake `cat .resol` ; else gmake ORCA2xLMD9671 ; fi


ORCA2xLMD9671 : libioipsl oasis3 liborchidee orca2 inca3 lmdz9671
	echo "ORCA2xLMD9671" >.resol
	echo "$(LIB_MPI)" >.libmpi

libioipsl :
	(cd ../../modeles/IOIPSL/src ; $(M_K) -f Makefile)

oasis3: $(OASIS3_DIR)/COMP_oasis3_$(LIB_MPI).$(PRISM_NAME) $(OASIS3_DIR)/COMP_oasis3_$(LIB_MPI).$(PRISM_NAME)
	(cd $(OASIS3_DIR) ; ./COMP_oasis3_$(LIB_MPI).$(PRISM_NAME) ; )

$(OASIS3_DIR)/COMP_oasis3_$(LIB_MPI).$(PRISM_NAME) :
	(cd $(PRISM_DIR) ; ./util/compile/frames/Create_COMP_libs.frm  - - "${PRISM_NAME}" "${LIB_MPI_BIS}" ; ./util/compile/frames/Create_COMP_models.frm oasis3 "${LIB_MPI_BIS}" - - "${PRISM_NAME}" "" "" ; )

liborchidee :
	(cd ../../modeles/ORCHIDEE/ ; $(M_K) -f Makefile)

config : libioipsl
	(cd ../../modeles/IOIPSL/src; $(M_K) -f Makefile config)
	(cd ../../modeles/ORCHIDEE/; $(M_K) -f Makefile config)
	$(BINDIR)/Fparser -main -name ORCHIDEE_OL $(MODS1)
	$(SCPDIR)/build_tkmenus
	./config.tk
	$(RM) Config.*

lmdz9671:
	(cd ../../modeles/LMDZ4; ./makegcm_fcm -d 96x71x19 -chimie AER -t 31 -m $(FCM_ARCH) create_etat0_limit ; cp bin/create_etat0_limit_96x71x19_t31_phylmd_seq.e ../../bin/create_etat0_limit.e ; )
	(cd ../../modeles/LMDZ4; ./makegcm_fcm -d 96x71x19 -chimie AER -t 31 -psmile true -v true -parallel true -c $(LIB_MPI) -m $(FCM_ARCH) gcm ; cp bin/gcm_96x71x19_t31_phylmd_para_orch_couple.e ../../bin/gcm.e ; )

orca4:
	(cd ../../modeles/OPA/WORK; $(M_K) P_P=$(KEY4) OASISMPI2_LIB='-L../$(PRISM_DIR)/$(PRISM_ARCH)/lib -lpsmile.$(LIB_MPI) -lmpp_io' ; )
orca2:
	(cd ../../modeles/OPA/WORK; $(M_K) P_P=$(KEY2) OASISMPI2_LIB='-L../$(PRISM_DIR)/$(PRISM_ARCH)/lib -lpsmile.$(LIB_MPI) -lmpp_io' ; )

inca3:  
	(cd ../../modeles/INCA3; ./inca_fcm -chimie AER -m $(FCM_ARCH) -parallel true -resol 96x71; cp SIMULATIONS/AER/inca.dat ../../bin/inca.dat ; )