#- $Id: inca.card 70 2007-06-21 14:20:42Z acosce $
[Compatibility]
libIGCM=1.0

[UserChoices]
# Set LMDZ_10m_winds to choose if the simulation will use online 10m wind (=y) or offline (=n)
LMDZ_10m_winds=y
# Set 10m_Winds_method to choose which way we will use to work with 10m wind from gcm (so if LMDZ_10m_winds=y)
#10m_winds_method=weibull10 --> use weibull method for 10m wind from gcm,
#10m_winds_method=threshold --> use threshold method for 10m wind from gcm
10m_winds_method=threshold
# Set climatological to choose the write_frequency for inca output (inca_avgr, forcage, inca_inst)
# 86400 = daily output
freq_write_chem=86400
# heat fluxes computed with feedback corresponding to 0 --> no aerosol effects, 1--> aerosol effects selected by ok_ade, ok_aie
feedb=0
#choose sedimentation multilayer or one layer 
multilayer_sedim=y
#coupled model with ORCH
#if yes, you need to put to CHEMISTRY_BVOC=y in orchidee.def and decomment lines for fertilizer and bbg in orchidee.card
CoupOrchInca=n
#active or not chemistry flux in output 
calcul_flux=y


# Use XIOS and/or IOIPSL as output library
XIOS=y
IOIPSL=n

[InitialStateFiles]
List= ()
	
[BoundaryFiles]
List=()

ListNonDel= (${R_IN}/CHM/INCA${RESOL_CHT}/npp.nc		,   npp.nc		)\
            (${R_IN}/CHM/INCA${RESOL_CHT}/o3clim.nc		,   o3clim.nc		)\
	    (${R_IN}/CHM/INCA${RESOL_CHT}/so4.nc		,   so4.nc		)\
            (${R_IN}/CHM/INCA${RESOL_CHT}/aircraft.nc		,   aircraft.nc    	)\
            (${R_IN}/CHM/INCA${RESOL_CHT}/sflx_nitrate.nc	,   sflx.nc		)\
	    (${R_IN}/CHM/INCA${RESOL_CHT}/landuse.nc		,   landuse.nc		)\
            (${R_IN}/CHM/INCA${RESOL_CHT}/rhvEC.txt		,   rhvEC.txt		)\
            (${R_IN}/CHM/INCA${RESOL_CHT}/wthEC.txt		,   wthEC.txt		)\
            (${R_IN}/CHM/INCA${RESOL_CHT}/clyEC.txt		,   clyEC.txt		)\
            (${R_IN}/CHM/INCA${RESOL_CHT}/wth.dat		,   wth.dat		)\
            (${R_IN}/CHM/INCA${RESOL_CHT}/cly.dat		,   cly.dat		)\
 	    (${R_IN}/CHM/INCA${RESOL_CHT}/rhv.dat		,   rhv.dat		)\
	    (${R_IN}/CHM/INCA${RESOL_CHT}/phototable_glo.dat   	,   phototable.dat	)


[ParametersFiles]
List=	(${SUBMIT_DIR}/PARAM/inca.def, .),\
	(${MODIPSL}/modeles/INCA/src/INCA_XML/context_inca.xml, .)   ,\
	(${MODIPSL}/modeles/INCA/src/INCA_XML/field_def_inca.xml, .) ,\
	(${MODIPSL}/modeles/INCA/src/INCA_XML/file_def_inca_NMHC.xml, file_def_inca.xml), \
    	(${MODIPSL}/bin/inca.dat, .)

[RestartFiles]
# List restart that have to be saved/restored each loop (file out, saved, and in) :
List= (NONE) 


[OutputText]
List=(inca.out, inca.def,context_inca.xml,field_def_inca.xml,file_def_inca.xml)

[OutputFiles]
List=	(inca_emi.nc,      ${R_OUT_CHT_O_D}/${PREFIX}_1D_inca_emi.nc,    NONE  ),\
	(inca_species.nc,      ${R_OUT_CHT_O_D}/${PREFIX}_1D_inca_species.nc, Post_1D_inca_species  ),\
	(inca_dvel.nc,      ${R_OUT_CHT_O_D}/${PREFIX}_1D_inca_dvel.nc,    NONE  ),\
	(inca_chem.nc,      ${R_OUT_CHT_O_D}/${PREFIX}_1D_inca_chem.nc,  Post_1D_inca_chem  ),\
	(inca_reacflux.nc,      ${R_OUT_CHT_O_D}/${PREFIX}_1D_inca_reacflux.nc,    NONE  ),\
	(inca_washrate.nc,      ${R_OUT_CHT_O_D}/${PREFIX}_1D_inca_washrate.nc,    NONE  )



[Post_1D_inca_species]
Patches= ()
GatherWithInternal = (lon, lat, presnivs, time_centered, time_centered_bounds,time_counter, area)
TimeSeriesVars2D = ()
ChunckJob2D = NONE
TimeSeriesVars3D = (vmrno,vmrno2,vmro3,vmrch4,vmrco,vmrno3, vmrhno3)
ChunckJob3D = NONE
Seasonal=OFF


[Post_1D_inca_chem]
Patches= ()
GatherWithInternal = (lon, lat, presnivs,time_centered, time_centered_bounds, time_counter, area)
TimeSeriesVars2D = (colo3, colco, colno2, colch2o, colch4, colhno2, coloh, colso2)
ChunckJob2D = NONE
TimeSeriesVars3D = ()
ChunckJob3D = NONE
Seasonal=OFF