source: CONFIG/UNIFORM/v6/LMDZOR_v6/GENERAL

Revision Log Mode:


Legend:

Added
Modified
Copied or renamed
Diff Rev Age Author Log Message
(edit) @3557   6 years jgipsl monitoring_orchidee/sechiba: * delta_water_stock, water_budget_closure and …
(edit) @3554   6 years jgipsl Allow vegetation to start grow again after it has died out by activating …
(edit) @3550   6 years jgipsl Corrected comment as done in IPSLCM6
(edit) @3540   6 years jgipsl - Changed name for monitoring maxveget_forcing into maxvegetagri_forcing …
(edit) @3539   6 years jgipsl Propagate modification done in IPSLCM6 config.
(edit) @3537   6 years jgipsl Added option VEGET_UPDATE_at_start in orchidee.card and driver. This …
(edit) @3531   6 years jgipsl Added files
(edit) @3529   6 years jgipsl Update as done in [3527]
(edit) @3528   6 years jgipsl Moved parameter to a better place in the file.
(edit) @3517   6 years jgipsl Remove file_def_orchidee.xml from PARAM directory and now copy it again …
(edit) @3506   6 years jgipsl Update ORCHIDEE component for IPSLCM6.0.14. * new PFT map files, still …
(edit) @3505   6 years jgipsl Updated LMDZOR_v6 for modifications related to CMIP6 workflow as done in …
(edit) @3459   6 years jgipsl Copied temporary file_def_orchidee.xml from ORCHIDEE/trunk into PARAM …
(edit) @3458   6 years jgipsl Updated LMDZOR_v6 config as done for IPSLCM6.0.13
(edit) @3436   6 years jgipsl Output variable veget_max from Orchidee changed name into veget_cov_max …
(edit) @3430   6 years jgipsl Set parameter for text output level for ORCHIDEE, PRINTLEV=1.
(edit) @3426   6 years jgipsl Add NVM and PFT_TO_MTC to be abel to run Choisnel hydrology with the new …
(edit) @3425   6 years jgipsl Update monitoring as done in IPSLCM6 [3420]
(edit) @3418   6 years jgipsl Update ORCHIDEE component for version 6.0.13: - change input file for …
(edit) @3417   6 years jgipsl Update LMDZOR_v6 as done in IPSLCM6 for stratospheric aerosol version 3 …
(edit) @3406   6 years tlurton Changed QBO diag to 5000 hPa and -5deg/+5deg average.
(edit) @3400   6 years jgipsl Set a default value for solaire parameter to make it easier to run a …
(edit) @3376   7 years jgipsl Update LMDZOR_v6 for LMDZ version 6.0.12 as done in IPSLCM6.
(edit) @3367   7 years jgipsl As done in IPSLCM6.0.12: Modified cld* parameters in physiq.def NPv6.0.12
(edit) @3362   7 years jgipsl Update LMDZOR_v6 configuration following IPSLCM6.0.12 : * take new …
(edit) @3323   7 years jgipsl Update physiq.def_NPv6.0.11 as done in IPSLCM6 revision [3310], [3311] and …
(edit) @3301   7 years jgipsl Add new physiques for IPSLCM6.0.11 as done in IPSLCM6
(edit) @3289   7 years jgipsl Adapt CREATE_clim and CREATE_amip * Now use new amip files from …
(edit) @3288   7 years jgipsl Updated ORCHIDEE component for IPSLCM6.0.11. To be used with ORCHIDEE …
(edit) @3287   7 years jgipsl Add variable in monitoring and remove variable ts absvisaer as done in …
(edit) @3247   7 years jgipsl Added physiq NPv6.0.10 and use as default, as done in IPSLCM6.
(edit) @3200   7 years jgipsl orchidee.driver : add modification for new file sechiba3 in ORCHIDEE. This …
(edit) @3197   7 years jgipsl Activate soil resistance in ORCHIDEE (option DO_RSOIL) for IPSLCM6.0.10 …
(edit) @3169   7 years jgipsl Updated version of LMDZ_Physics as done in IPSLCM6 Removed duplicated …
(edit) @3155   7 years jgipsl Added new parameter files as done in IPSLCM6
(edit) @3141   7 years jgipsl Removed new option for soil resistance from ORCHIDEE parameter file.
(edit) @3133   7 years jgipsl Add from IPSLCM6
(edit) @3131   7 years jgipsl Update as done in IPSLCM6
(edit) @3128   7 years jgipsl Changes as done in IPSLCM6 rev [3121] : - change in time serie variables …
(edit) @3127   7 years jgipsl - Added comments in Script_Output for the parameter solaire which is …
(edit) @3104   7 years jgipsl Add copy of file_def_histstrataer_lmdz.xml from LMDZ sources. This file is …
(edit) @3093   7 years jgipsl Modified set up of orchidee to fit with IPSLCM6.0.8. To benefit from all …
(edit) @3092   7 years jgipsl Add scalar forcing as done in IPSLCM6.
(edit) @3071   7 years jgipsl Added new physics as done in IPSLCM6
(edit) @3056   7 years jgipsl Updated values for GHG according to CMIP6 forcings.
(edit) @3047   7 years jgipsl Enhancement on the use of WriteFrequency? for sechiba component. This …
(edit) @3037   7 years jgipsl Commented monitoring of scalars as done in IPSLCM6
(edit) @3036   7 years jgipsl Added gcm.def for new physics
(edit) @3034   7 years jgipsl Updated LMDZOR_v6 with IPSLCM6: * now activate flag_aerosol_strat=2 and …
(edit) @3032   7 years jgipsl * iphysiq is not longer changed in the lmdz.driver. * gcm.def now has the …
(edit) @3031   7 years jgipsl Delete intermediate versions of new physics as done in IPSLCM6
(edit) @3017   7 years aclsce - Use of new GHG CFC11 and CFC12 CMIP6 values for IPSLCM6 and LMDZOR_v6 …
(edit) @3015   7 years jgipsl Updated as done for IPSLCM6.0.6 : removed tracer RN, PB and changed to use …
(edit) @2957   8 years jgipsl Removed CONTFRAC as time-serie and add it in GatherWithInternal?. …
(edit) @2955   8 years jgipsl - Removed CO2FLUX from TS : this variable is not written anymore by …
(edit) @2952   8 years jgipsl Correction on monitoring of vegetation fractions
(edit) @2946   8 years jgipsl Activate ROUGH_DYN=y (Su parametrization) as already done in IPSLCM6
(edit) @2934   8 years jgipsl Update time-series and monitoring for orchidee (only sechiba) component
(edit) @2932   8 years jgipsl - Added TS variables for orchidee (water budget) - Added frac_snow as TS - …
(edit) @2929   8 years jgipsl Added new physiq version for LMDZ. To be used with LMDZ/testing 2595
(edit) @2928   8 years jgipsl Update configuration LMDZOR_v6 to be used with LMDZ/testing 2595 and …
(edit) @2915   8 years lfairhead Updating the LMDZ/XIOS files to testing version 2542 LF
(edit) @2914   8 years lfairhead Missing some default parameters from the convection.def file inclusion Of …
(edit) @2911   8 years jgipsl pmagic can now be set in lmdz.card. The default value (always 0.0) is used …
(edit) @2910   8 years jgipsl - Removed ok_strato and ok_hines from physiq.def. These flags are set in …
(edit) @2907   8 years jgipsl Set default value for stomate output frequency even if the files are …
(edit) @2904   8 years jgipsl Removed option to switch of XIOS for LMDZ. Note the option was not working …
(edit) @2901   8 years jgipsl Always have nbapp_rad=16 in couled and forced run. Frederic Hourdin
(edit) @2900   8 years jgipsl Better comments and reordering.
(edit) @2896   8 years jgipsl Put back pmagic=0.0 as before commit [2893]. Only IPSLCM6 pdControl …
(edit) @2893   8 years jgipsl Updated LMDZOR_v6 as done for IPSLCM6.0.4 from revision [2876] uptil …
(edit) @2859   8 years jgipsl Removed specific treatment of Bands_ file and option adjust in lmdz. See …
(edit) @2856   8 years jgipsl Correction of name of new output file out_"execname".
(edit) @2853   8 years lfairhead Follow-up to convection.def file cleanup LF
(edit) @2847   8 years lfairhead Parameters that were in convection.def file are now in physiq.def file No …
(edit) @2841   8 years jgipsl Ticket #92 Correction on option lmdz_UserChoices_CARBON_CYCLE. Note this …
(edit) @2838   8 years jgipsl Correction : ok_hines and ok_strato are set in vert.def
(edit) @2833   8 years aclsce - Added config.card LongName? as global attribute of output files of v6 …
(edit) @2801   8 years lfairhead Added *def files for LMDZ NPv5.5 LF
(edit) @2784   8 years aclsce - Added "prw_global" as variable monitored in order to replace old …
(edit) @2769   8 years jgipsl Added parameters for chemistry BVOC as done in LMDZORINCA_v6.
(edit) @2767   8 years jgipsl The vertical parameters were previously extracted from gcm.def files and …
(edit) @2757   8 years jgipsl Some update in LMDZOR_v6 configuration: the parameters LAND_USE and …
(edit) @2755   8 years jgipsl - Corrected error in value for tetagrot in gcm.def_144x142 - Removed …
(edit) @2742   8 years jgipsl Updated file_def_xxxxx_lmdz.xml to be compatible with LMDZ/trunk from …
(edit) @2736   8 years jgipsl Change in parameter files for LMDZ: * created vert.def containing …
(edit) @2733   8 years jgipsl Added ALB_BG_MODIS new parameter. Removed HYDROL_SOIL_DEPTH and …
(edit) @2732   8 years jgipsl Corrected error in commit [2729]
(edit) @2729   8 years jgipsl * L79_NPv5.17g, L79_NPv5.17h : strongly dependent on the LMDZ source …
(edit) @2725   8 years jgipsl Changed day_step as done in IPSLCM6 already in changeset [2674]
(edit) @2698   8 years jgipsl Copied NPv5.17h from IPSLCM6 to LMDZOR_v6
(edit) @2640   8 years jgipsl Removed variable Sinang: this variable changed name in ORCHIDEE trunk rev …
(edit) @2635   9 years jgipsl Remove the field duhin and dvhin from file_def for LMDZ. This is done to …
(edit) @2630   9 years jgipsl Removed parameter grilles_gcm_netcdf not longer existing in LMDZ. …
(edit) @2627   9 years lfairhead Inclusion of more up-to-date physical parameters for LMDZ
(edit) @2615   9 years jgipsl Add comment to know origine of the files (testing LMDZ rev 2314).
(edit) @2606   9 years jgipsl Removed modifications from xios.driver and set correct behaviour in …
(edit) @2605   9 years jgipsl - Put back NMC monthly output as default for LMDZOR experiments - More …
(edit) @2604   9 years jgipsl Clean in .card. Removed OldName? not used anymore in config.card. Removed …
(edit) @2602   9 years jgipsl * orchidee.def : Deactivate FIRE in ORCHIDEE (FIRE_DISABLE=y). Add …
Note: See TracRevisionLog for help on using the revision log.