source: CONFIG/UNIFORM

Revision Log Mode:


Legend:

Added
Modified
Copied or renamed
Diff Rev Age Author Log Message
(edit) @4445   5 years jgipsl Cleaning of experiments as decided this morining during the CONFIG …
(edit) @4444   5 years jgipsl Comments for compilation
(edit) @4442   5 years acosce forgive some files in the previous commit (update inca.card file in …
(edit) @4441   5 years acosce update inca card in IPSLCM5A2CHT configuration Add rrtm in compilation
(edit) @4439   5 years acosce There was an error in the compilation line of lmdz with inca
(edit) @4437   5 years acosce Add possibility to make experiment in ESM mode with interactive aerosols …
(edit) @4433   5 years cetlod Some changes in AA_make for CM6 : add IPSLCM6-MR025 configuration, no need …
(edit) @4431   5 years jgipsl Update config with changes done in IPSLCM6.2
(edit) @4430   5 years jgipsl Needed for the coupled model with trunk XIOS. This line does not disturbe …
(edit) @4429   5 years jgipsl Added cpl_old_calving in run.def and lmdz.card and driver. Default as …
(edit) @4420   5 years aclsce - Consolidated highresmip_CMIP6 experiment : member added in config.card, …
(edit) @4417   5 years cetlod IPSLCM6.2 : modifying coupled OA oasis interface to be able to run with …
(edit) @4413   5 years jgipsl Updated config with changes done on LMDZOR_v6.2.
(edit) @4412   5 years jgipsl Started new configuration in familly v6.2. This configuration starts from …
(edit) @4411   5 years jgipsl Copied script for compilation from ICOLMDZOR_v7 and adapt it to compile …
(edit) @4410   5 years jgipsl Added EnvFile? in config.card. If the file exists it'll be will be sourced …
(edit) @4409   5 years jgipsl Add printing of start and end time of compilation
(edit) @4408   5 years jgipsl Redirect output from compilation into file
(edit) @4407   5 years jgipsl Added argument -debug/-dev/-prod to easier change compile mode.
(edit) @4405   5 years acosce update path for input files SAD on new lmdzorinca config
(edit) @4401   5 years aclsce -Added highresmip_CMIP6 experiment in ICOLMDZOR configuration.
(edit) @4399   5 years acosce there were some mistakes on path files for new inca configuration
(edit) @4397   5 years cetlod NEMO_v6 : updating ORCA2 namelist
(edit) @4396   5 years acosce remove hiden files .…
(edit) @4395   5 years acosce new config directory for LMDZORINCA configuration : same than …
(edit) @4393   5 years cetlod NEMO_v6_omip : changes sss file for ORCA1 config
(edit) @4391   5 years jgipsl Enhancement in compilation and link to running environnement: The …
(edit) @4390   5 years jgipsl Added folder for ARCH files which can be used by several modeles for …
(edit) @4389   5 years jgipsl Small correction on the interpolated output grid to have same longitudes …
(edit) @4388   5 years jgipsl Update input files as done in highresmip experience. Previous start and …
(edit) @4387   5 years jgipsl Added monitoring copied from LMDZOR_v6.2
(edit) @4386   5 years jgipsl Update iodef.xml file to use the same as in v6/IPSLCM6.
(edit) @4381   5 years jgipsl Add output text file. Set CompressionLevel?=0 to be abel to activate more …
(edit) @4380   5 years jgipsl Add post-treatments set output_level_histmth = 3 : When using level 5 it …
(edit) @4379   5 years jgipsl Added sed to modify output grid parameters depending on NBP resolution. …
(edit) @4378   5 years jgipsl Removed old code never used or maybe used in IPSLCM5A/Chistorical.
(edit) @4377   5 years jgipsl Changed slightly output grid for interpolated output. This is done to have …
(edit) @4375   5 years jgipsl Change parameter tau_gl due to change of sea-ice files in commit [4367]. …
(edit) @4374   5 years jgipsl Folder changed name
(edit) @4373   5 years jgipsl Remove from card
(edit) @4372   5 years jgipsl Add etat0_start_iteration_reset and set it =y only the first CumulPeriod?.
(edit) @4371   5 years jgipsl Set calendar to leap for highresmip experience
(edit) @4370   5 years jgipsl Added cosp in the compilation of LMDZ
(edit) @4369   5 years jgipsl - Corrections for COSP - Removed LongName?: it is set automatically by the …
(edit) @4368   5 years jgipsl Modifed according to changeset 3471 on LMDZ6/trunk. There is now a section …
(edit) @4367   5 years jgipsl Update to take HadISST2 input files to be coherent with highresmip …
(edit) @4366   5 years jgipsl Modification to have right date when running create_etat0_mode.
(edit) @4365   5 years jgipsl Change path
(edit) @4364   5 years jgipsl Correction; variable RESOL_ATM_XY can not be used
(edit) @4363   5 years jgipsl Update input file list to be coherent for highresmpi experiment setup. …
(edit) @4362   5 years jgipsl Use ECDYN also as ECPHY for coherence
(edit) @4360   5 years jgipsl Cleaning
(edit) @4359   5 years jgipsl Move higher up
(edit) @4358   5 years jgipsl Change to have 4 trancers instead of 6. start.nc and startphy.nc files …
(edit) @4357   5 years jgipsl Set compression_level=2 from config.card as done in IPSLCM6.
(edit) @4356   5 years jgipsl Change name for file orography.
(edit) @4355   5 years jgipsl Update time step. S. Fromang
(edit) @4353   5 years jgipsl Added the use of CompressionLevel (global attribute) to be defined in …
(edit) @4352   5 years jgipsl Added the use of CompressionLevel (global attribute) to be defined in …
(edit) @4351   5 years jgipsl Updated with changes done in LMDZOR_v6 in changeset [4260], [4311] and …
(edit) @4350   5 years jgipsl Removed file which was duplicated by misstake
(edit) @4349   5 years jgipsl Update parameter files. T. Dubos, S. Fromange
(edit) @4348   5 years jgipsl Add SpaceName? and ExperimentName?
(edit) @4347   5 years jgipsl Change to use new version of AMIP files, these files were also used for …
(edit) @4346   5 years jgipsl Files changes place on synchronized repository
(edit) @4345   5 years jgipsl Increase value for recv_field_timeout. YM
(edit) @4344   5 years jgipsl More changes for create_etat0_limit experiment: - Change to run in …
(edit) @4343   5 years jgipsl Removed RESOL_ATM_3D from JobName?. This variable is read by libIGCM from …
(edit) @4342   5 years jgipsl Adapted ce0l experiment: - Change input files to format netcdf-4 - Add …
(edit) @4341   5 years jgipsl Corrected error
(edit) @4340   5 years jgipsl Activate read_climoz again and changed input file. The error was only the …
(edit) @4339   5 years jgipsl Change to compile by default in hybrid mode.
(edit) @4338   5 years jgipsl Change to use input files on netcdf-4 format. This is needed to run with …
(edit) @4337   5 years jgipsl Source env file in ARCH folder before compilation.
(edit) @4336   5 years jgipsl - Added AUTO in lmdz xml files. - Now activate output files for LMDZ and …
(edit) @4334   5 years jgipsl Add flag_aersol=7 and related input file to get closer to highresmip …
(edit) @4333   5 years jgipsl Correction
(edit) @4332   5 years jgipsl Added start of highresmip experience. More changes are needed to make …
(edit) @4330   5 years jgipsl Desactivate river routing in ORCHIDEE. Current version do not support …
(edit) @4329   5 years jgipsl - Specify which file containing module load using option EnvFile? in …
(edit) @4327   5 years jgipsl Added folder for ARCH files which can be used by several modeles for …
(edit) @4326   5 years jgipsl - Changed to compile with -j 4 for XIOS. -j 8 is too much at irene for …
(edit) @4325   5 years jgipsl * Added xml files for LMDZ needed for LMDZ6/trunk revision 3468 and copy …
(edit) @4324   5 years jgipsl Set back nqtot=6 to be coherent with start files. Commented parameter …
(edit) @4323   5 years jgipsl * Correction: set dayref and anneeref also when running with DYNAMICO * …
(edit) @4319   5 years jgipsl Change number of tracers to be coherent with tracer.def.
(edit) @4318   5 years jgipsl Correction: file run_icosa.def changed name to run_dynamico.def in one of …
(edit) @4313   5 years aclsce - Changed IPSLCM6.1.8 to IPSLCM6.1.9 as Long Name in config.card
(edit) @4312   5 years jgipsl - add stomate3 in section without SBG
(edit) @4311   5 years jgipsl Added possibility to have a 3 stomate output file. This is the case in the …
(edit) @4299   5 years jgipsl Change in input files for ORCHIDEE needed since revision 5786 on …
(edit) @4297   5 years aclsce - Fixed bad sed syntax for modify compression level in xml file_def.
(edit) @4296   5 years aclsce - Added the use of CompressionLevel? (global attribute) to be defined in …
(edit) @4295   5 years cetlod Minor Changes to force TimeOrigin? (year/month/day) of NEMO files from …
(edit) @4294   5 years acosce Add possibility to manage in orchidee.card the interaction between surf …
(edit) @4293   5 years acosce update IPSLCMCHT configuration * add interaction between surf and chm by …
(edit) @4291   5 years jgipsl * Added experiement for create_etat0_limit. * Add values for parameters …
(edit) @4290   5 years jgipsl Set iflag_phys correctly even though it will not be used for the case …
(edit) @4288   5 years jgipsl * Moved variables related to the vertical discretization from …
(edit) @4287   5 years acosce [inca config] there was an error with a file depending on year in …
Note: See TracRevisionLog for help on using the revision log.