| Version 18 (modified by falletti, 4 years ago) (diff) |
|---|
IPSLCM6.2 configuration - the ESM configuration
Table of contents
IPSLCM6.2_work is a configuration under construction. Contact one of the persons in charge before first use.
Persons in charge: Josefine Ghattas, Arnaud Caubel, Christian Ethé, Anne Cozic
The IPSLCM6.2 configuration is a part of the IPSLCM6 family model describes here
1. Resolutions and configurations
IPSLCM6.2 model is available for different resolutions and sub-configurations :
- VLR : LMDZ 96x95x39-ORCHIDEE - NEMO-LIM2-PISCES ORCA2xL31. under development
- LR : LMDZ 144x144x79-ORCHIDEE - NEMO-LIM3-PISCES eORCA1xL75
- MR1 : LMDZ 256x256x79-ORCHIDEE - NEMO-LIM3-PISCES eORCA1xL75 under development
- MR025 : LMDZ 256x256x79-ORCHIDEE - NEMO-LIM3 eORCA025xL75
- ESMCO2 : LMDZ 144x144x79-ORCHIDEE - NEMO-LIM3-PISCES eORCA1xL75 with interactive carbon cycle ocean/atmosphere.
- ESMAER : LMDZ 144x144x79-ORCHIDEE-INCA - NEMO-LIM3-PISCES eORCA1xL75 with interactive aerosols on atmosphere.
IPSLCM6.2 is composed of following components and tools (Oct. 2019) :
#-H- IPSLCM6.2_work IPSLCM6.2_work coupled configuration #-H- IPSLCM6.2_work This configuration is under construction #-H- IPSLCM6.2_work NEMOGCM branch nemo_v3_6_STABLE revision 9455 #-H- IPSLCM6.2_work SHACONEMO revision 279 #-H- IPSLCM6.2_work XIOS trunk revision 1659 #-H- IPSLCM6.2_work IOIPSL src trunk 4432 #-H- IPSLCM6.2_work LMDZ6 trunk rev 3489 #-H- IPSLCM6.2_work ORCHIDEE version branches/ORCHIDEE_2_2/ORCHIDEE revision 6189 #-H- IPSLCM6.2_work OASIS3-MCT 2.0_branch rev 1818 #-H- IPSLCM6.2_work IPSLCM6.2 latest revision #-H- IPSLCM6.2_work libIGCM trunk rev 1482 #-M- IPSLCM6.2_work arnaud.caubel@lsce.ipsl.fr #-C- IPSLCM6.2_work IOIPSL/trunk 4432 8 IOIPSL modeles #-C- IPSLCM6.2_work branches/ORCHIDEE_2_2/ORCHIDEE 6189 14 ORCHIDEE modeles #-C- IPSLCM6.2_work branches/OASIS3-MCT_2.0_branch/oasis3-mct 1818 15 oasis3-mct . #-C- IPSLCM6.2_work LMDZ6/trunk 3559 11 LMDZ modeles #-C- IPSLCM6.2_work CONFIG/UNIFORM/v6/IPSLCM6.2 HEAD 8 IPSLCM6 config #-C- IPSLCM6.2_work trunk/libIGCM 1488 10 libIGCM . #-C- IPSLCM6.2_work branches/2015/nemo_v3_6_STABLE/NEMOGCM 9455 7 . modeles #-C- IPSLCM6.2_work trunk/ORCA1_LIM3_PISCES 287 17 . modeles/NEMOGCM/CONFIG #-C- IPSLCM6.2_work trunk/ORCA025_LIM3_PISCES 287 17 . modeles/NEMOGCM/CONFIG #-C- IPSLCM6.2_work trunk/INCA6 873 9 INCA modeles #-C- IPSLCM6.2_work XIOS/trunk 1659 12 XIOS modeles
1.1. IPSLCM
The default configuration LR is close to IPSLCM6.1 described in IPSLCM6.1 configuration.
- To compile you will use the target the command ./compile_ipslcm6.sh (see below for more details on compilation)
- For the experiments, you can choose between EXPERIMENTS/IPSLCM/pdControl_TEST and EXPERIMENTS/IPSLCM/piControl_TEST
1.2. IPSLESM
This configuration allows coupling with CO2 cycle or interactive aerosols calculated by Inca model.
On this page we will describe how to use these 2 existing ESM configurations : ESMCO2 and ESMAER
2. Technicals Details
2.1. How to use it
To retrieve the configuration :
mkdir YOUR_DIRECTORY ; cd YOUR_DIRECTORY svn_ano # svn co http://forge.ipsl.jussieu.fr/igcmg/svn/modipsl/trunk modipsl cd modipsl/util ./model IPSLCM6.2_work cd ../config/IPSLCM6.2
The compilation slightly differs from what has been done so far. Now we used a script named compile_ipslcm6.sh with several option ( resolution, level of optimisation, full or partial recompilation ) to compile the model
########################################################################
# Usage of the script compile_ipslcm6.sh
#
########################################################################
./compile_ipslcm6.sh [Options]
Options: [LR / VLR / MR1 / MR025] Model resolution, choose only one. Default: LR.
[ESMCO2] Compile IPSLCM6 for CO2 interactif ocean/atmosphere.
[ESMAER] Compile IPSLCM6 for AER interactif on atmosphere
[-full] Full recompilation of all components. This option can be added to all other options.
[-cleannemo] Full recompilation of NEMO component only.
[-debug / -dev / -prod] Level of optimization. One of these can be added to all other compile options. Default: -prod.
Example 1: Default compilation of IPSLCM6 for resoltion LR
(Resolution atmos: 144x142x79, ocean: ORCA1)
./compile_ipslcm6.sh
Example 2: Compilation of IPSLCM6 for resolution MR025
(atmos: 256x256x79, ocean: ORCA025, NOPISCES)
./compile_ipslcm6.sh MR025
Example 3: Compilation of IPSLCM6 for ESM CO2
./compile_ipslcm6.sh ESMCO2 -cleannemo
Example 4: Default resoltuion (LR) compiled in debug mode
./compile_ipslcm6.sh -debug
Example 5: Default compilation with full recompilation of all components. No clean is needed.
./compile_ipslcm6.sh -full
Example 6: Full recompilation of resolution MR05 in debug mode
./compile_ipslcm6.sh MR025 -debug -full
To compile and create the Job for ESMCO2
./compile_ipslcm6.sh ESMCO2 cp EXPERIMENTS/IPSLESM/CO2/piControl_TEST/config.card . vi config.card # modify JobName (at least) : MYJOBNAME, restarts ../../util/ins_job # Check and complete job's header cd MYJOBNAME vi Job_MYJOBNAME # modify PeriodNb, adjust the time, headers ... sbatch Job_MYJOBNAME # IDRIS ccc_msub Job_MYJOBNAME # TGCC
To compile and create the Job for ESMAER
./compile_ipslcm6.sh ESMAER cp EXPERIMENTS/IPSLESM/AER/piControl_AER_TEST/config.card . vi config.card # modify JobName (at least) : MYJOBNAME, restarts ../../util/ins_job # Check and complete job's header cd MYJOBNAME vi Job_MYJOBNAME # modify PeriodNb, adjust the time, headers ... ccc_msub Job_MYJOBNAME # TGCC
2.2. Restart files
- ESMCO2 configuration starts from IPSLCM6 CM61-pre-pi-01 simulation (1849-12-31) available from RESTART/IPSLCM6/PROD/piControl-spinup for all the components, except for the Coupler. The latter is taken from /ccc/store/cont003/gencmip6/p86cadul/IGCM_OUT/IPSLCM6/PROD/piControl-spinup/
- ESMAER configuration starts from IPSLCM6 CM61-pre-pi-01 simulation (1849-12-31) available from RESTART/IPSLCM6/PROD/piControl-spinup for all the components, except for the atmosphere. The latter is taken restart of the same simulation adding the concentration fo tracers for Inca aerosols configuration. This specific restart file is actually store on p24cozic account.
2.3. Output level
By default, only monthly outputs and low output levels are activated.
2.4. Lengths, frequencies
2.4.1. Period length
Default period length is 1Y, i.e in config.card :
PeriodLength=1Y
Note that clean_PeriodLength.job will remove last period files, i.e last simulated year files.
2.4.2. Pack Frequency
Default pack frequency is 1Y, i.e in config.card :
PackFrequency=1Y
2.4.3. Rebuild frequency
Since we run with XIOS (server mode) as output library, the rebuild step is not needed anymore.
2.5. How to add a parameter in NEMO's namelist?
- let find the parameter in namelist_ref. For example in modeles/NEMOGCM/CONFIG/SHARED/namelist_ref
- let find the namelist's name : for example &namicedyn
- let add a line with the new of the parameter in the file PARAM/namcouple_ESMCO2_ORCA1xLMD144142 in the &namicedyn section
2.6. What is the maximum length for a simulation name?
Due to limitation in NEMO, a simulation should have less than 39 characters.
2.7. Computing centres
2.7.1. TGCC Bull Curie thin nodes (not anymore in service)
- ESMCO2 : Default configuration on 929 cores allows you to run 13 simulated years per day.
