| Version 5 (modified by trac, 10 years ago) (diff) |
|---|
The LMDZORINCA configurations
Table of contents
Table of contents
The LMDZORINCA configurations (LMDZORINCA and LMDZORINCA_v5) allow you to couple the LMDz atmospheric circulation model, the ORCHIDEE land model, and the INCA atmospheric chemistry model.
Person in charge: Anne Cozic
1. The sources of the components
1.1. LMDZORINCA_v5
LMDZORINCA_v5 is the default configuration. It is compatible with the IPSLCM5_v5, LMDZOR_v5, IPSLCM5CHT_v5 models. It is constructed with the following models:
- LMDZ trunk LMDZ5 rev 1628 for the gcm and the create_etat0_limit
- ORCHIDEE tag ORCHIDEE_1_9_5
- INCA tag INCA4.1.1
This configuration allows you to work with the INCA version tuned for 39 levels.
It is not yet possible to use the new LMDZ physics scheme with this configuration.
1.2. LMDZORINCA
LMDZORINCA is the configuration used for CMIP5. It is constructed with the following models:
- LMDZ branch LMDZ4_AR5 rev 1567 for the gcm
- LMDZ trunk LMDZ5 rev 1531 for the create_etat0_limit
- ORCHIDEE tag orchidee_1_9_5 on the cvs file repository
- INCA trunk INCA3 rev 255
This configuration allows you to work with the INCA version tuned for 19 levels.
1.3. Flags managing the INCA and ORCHIDEE activation
When you compile a model configuration which includes the INCA and ORCHIDEE models, those two models can be activated or deactivated in your simulation. In LMDZORINCA_v5 these activations are managed by the submission directory you chose (in EXPERIMENTS).
1.3.1. Activating or deactivating INCA
| Flag | Value | Meaning |
| config_inca | none | run without INCA |
| config_inca | aero | coupling with INCA AER/NMHC_AER |
| config_inca | chem | coupling with INCA NMHC/GES |
1.3.2. Activating or deactivating ORCHIDEE
| Flag | Value | Meaning |
| veget | y | run with Orchidee |
| veget | n | run without Orchidee |
2. Available resolutions
When you compile the model you must choose the chemistry component and its resolution:
- AERxLMD9695-L39
- NMHC_AERxLMD9695-L39
- GESxLMD9695-L39
- AERxLMD144x142-L39
- AERxLMD9695-L19
- NMHC_AERxLMD9695-L19
- GESxLMD9695-L19
- AERxLMDZ144142-L19
With LDMZORINCA_v5 we recommend to use the 39 vertical level resolution. With LMDZORINCA we recommend to use the 19 vertical levels resolution.
2.1. Changing the resolution
You can add the compilation of another resolution by copying the syntax of an existing resolution. If you do so, you will need to regrid all input files for the chosen chemistry model. documentation To regrid the inca files
3. Initial states
With the LMDZ model you can create initial files (start.nc, startphy.nc and limit.nc) for each simulation (for this, use the experiments : EXPERIMENTS/LMDZORINCA/CREATE/). However, start.nc file only contain zero-values for tracers when the model is coupled to INCA. You must therefore work on those values or use output files from existing simulations. By default, we provide one initial state per configuration.
- ${R_INIT}/CHM/LMDZORINCA/INCA${RESOL_CHM}/start.nc --> start.nc
- ${R_INIT}/CHM/LMDZORINCA/INCA${RESOL_CHM}/startphy.nc --> startphy.nc
With
- ${R_INIT} = /ccc/work/cont003/p86ipsl/IGCM/INIT at TGCC
- ${RESOL_CHM} = 9695-L39 / 9695-L19 / 144142-L19 / 144142-L39
They are defined in the [InitialStateFiles] section of lmdz.card
[InitialStateFiles] List= (${R_INIT}/CHM/LMDZORINCA/INCA${RESOL_CHM}/start.nc , start.nc ) \ (${R_INIT}/CHM/LMDZORINCA/INCA${RESOL_CHM}/startphy.nc , startphy.nc )
4. Experiments
In the EXPERIMENTS directory the available configurations are LMDZORINCA, LMDZOR, LMDZ. In LMDZORINCA you can choose among three kind of experiments:
- NMHC_AER
- AER
- GES
4.1. inca.card
4.1.1. 10-m winds
- There is an experiment directory for each configuration of the chemistry component:
- EXPERIMENT/LMDZORINCA/NMHC_AER/
- EXPERIMENT/LMDZORINCA/AER/
- EXPERIMENT/lMDZORINCA/GES/
Each of those directories contain a config.card
- If you work with an aerosol configuration (AER or NMHC_AER) you can chose to work with 10-m winds computed by the LMDZ model or read in forcing files. By default the second option is chosen. On the other hand, if you want to use the values computed by LMDZ, you must change the model by hand by setting the climatological variable to true in INCA3/src/INCA_SRC/aerosol_meteo_calc.F90.
Files definition to read the 10-m winds
[BoundaryFiles]
List= (/ccc/work/cont003/dsm/p24data/ECMWF320x160/AN${year}/165_${year}${month}.nc , u10mec.nc)\
(/ccc/work/cont003/dsm/p24data/ECMWF320x160/AN${year}/166_${year}${month}.nc , v10mec.nc)\
(/ccc/work/cont003/dsm/p24data/ECMWF${RESOL_ATM_XY}/AN${year}/u10m_ecmwf_${year}${month}.nc , u10m.nc )\
(/ccc/work/cont003/dsm/p24data/ECMWF${RESOL_ATM_XY}/AN${year}/v10m_ecmwf_${year}${month}.nc , v10m.nc )
4.1.2. Text outputs
In the INCA4 model version, the text outputs are not in the standard output files. They are redirected to a text file per processor. These files are concatenated at the end of the simulation to create only one inca.out file. This file is saved in the DEBUG/ archive. If the simulation fails, the file is saved in the Debug/ directory which is available in the experiment directory.
4.2. lmdz.card
You will find all the information needed to understand the lmdz.card file here.
4.2.1. The nudged mode
You can work in nudged mode (by forcing the winds using files read by the LMDZ model) or in climatological mode (by using the wind values computed by LMDZ). If you work in nudged mode, several forcing files are available on the p24data shared account at TGCC : /ccc/work/cont003/dsm/p24data
- ECMWF96x95 : regridded winds in 96x95 from OPERA of ecmwf
- ECMWF144x142 : regridded winds in 144x142 from OPERA of ecmwf
- ECMWF320x160 : winds distributed by ecmwf
4.2.2. adjust
If you have a simulation which includes the INCA model, you must not use the adjust option which creates biases at the beginning of the simulation in particular for configurations with aerosols. If you didn't change the models you can use Bands files which are defined by default in the lmdz.card files.
AER #LMDZ_Bands_file_name=/ccc/store/cont003/dsm/p86cozic/IGCM_OUT/LMDZORINCA/AER/L5OI4_Bands/ATM/Debug/L5OI4_Bands_Bands_96x95x39_32prc.dat_1 NMHC_AER #LMDZ_Bands_file_name=/ccc/store/cont003/dsm/p86cozic/IGCM_OUT/LMDZORINCA/NMHC_AER/L4OI3NA_39_Bands/ATM/Debug/L4OI3NA_39_Bands_Bands_96x95x39_32prc.dat_1 GES not provided
If you added computations in the model, we recommend to regenerate this file by performing a 3-month pre-simulation.
5. The aerosol coupling and the radiative effect in LMDZORINCA
LMDZORINCA allows you to activate the aerosol impact on climate. To this end, we have used Céline Déandreis' PhD results.
This coupling can be made in two different modes:
- offline (reading the aerosols in files)
- online (computing the aerosols using INCA)
Different flags were introduced to manage these new options: aerosol_couple and flag_aerosol
(in physiq.def).
The aerosols you can use with offline or online coupling are : SO4, BC, POM, SS and DUST. If your coupling is offline, refer to the next chapter.
5.1. Flag definitions
| Flag | Value | Meaning |
| aerosol_couple | n | offline coupling |
| aerosol_couple | y | online coupling |
LMDZ offers two flags to activate the radiative forcings: ok_ade, ok_aie
| Flag | Value | Meaning |
| ok_ade | y/n | computing (or not) the aerosol direct effect |
| ok_aie | y/n | computing (or not) the aerosol indirect effect |
The ok_ade and ok_aie flags are managed from lmdz.card :
- AER --> aerosol_couple = y, ok_ade = y and ok_aie = n
- NMHC_AER --> aerosol_couple = y, ok_ade = y and ok_aie = n
- GES --> aerosol_couple = n, ok_ade = n and ok_aie = n
5.2. Variable definitions
You can also choose to compute the radiative forcing without their climatic impacts. In this case, you must use the feedb variable in the src/INCA_SRC/radlwsw_inca.F90 routine. If the variable equals 0 the climatic impact is not activated, if the variable equals 1 the climatic impact is activated.
