Version 24 (modified by ramiro, 4 years ago) (diff) |
---|
INCA AER LR
Table of contents
IPSLCM6-AER (To do list for Anne and Ramiro before launch CMIP6 simulations )
1. Which simulations ?
Simulation Name | Tier | Domains | Duration | Properties | Info | LINK |
---|---|---|---|---|---|---|
piClim-control | 1 | Atm+Aer | 30 years | Fixed SST ERF | PI sst, ice climatology, PI aer | Official Description |
piClim-aer | 2 | Atm+Aer | 30 years | Fixed SST ERF | PI sst, ice climatology, PD aer | Official Description |
2. Ping files
- send email to Arnaud (2020/04/30)
- Arnaud answer
Hi Anne and Ramiro, I have generated xmls files for piClim-control experiment (30 years from 1850 to 1879) because they are different from piControl experiment. Could you test them on 1year simulation (before launching 30 years) ? Let me know if it is ok for you. Once you will have confirmed it is ok, I will generate xmls files for other experiments. Cheers, Arnaud
Ramiro (It has been run a test for 1 year for pi-control-AER (with ocean coupled) and the piClim-Control with forced ocean SST and ICE).
Path is : IGCM/CMIP6/IPSLCM6.1.11-LR/IPSL-CM6A-LR-INCA/piClim-control
- 2020/05/01 There is a new experiment directory EXPERIMENTS/LMDZORINCA/piClim-control_CMIP6/ with ping files
- 2020/05/01 commit because I forget the inca ping file (!!!) see rev here
- 2020/05/01 commit for an error on dr2xml inca file here
Simulation bug with this error
A grid must be defined for field 'CMIP6_rlutcsaf'
--> to do : understand this problem and correct it. (on next monday)
20200504 : correction done, the lmdz ping files was not the good one. New revision 5077. Now the simulation run for 1 day, I will test a longer run (1 year) to check post-treatment
3. input files for forced model
3.a SST : mail from Olivier Boucher
Il me semble que pour être cohérent avec la non-réalisation d'un DECK, il doit prendre les SST du piControl officiel. Que dit le protocole pour ces simulations à SST fixées ? SST observées ou SST du piControl ?translation
to be coherent with the fact we not rerun a deck, we need to use SST from the offical picontrol simulation. Before to made this choice we need to check the protocol for fixed sst ? observed or picontrol sst ?
- Ramiro
- verify protocol to know if we use sst from obsevation or from picontrol run
- The protocol indicates that: Fixed SST ERF simulation. Use pre-industrial climatological average SST and sea-ice distributions.
- The official paper describing AerChemMIP indicates:
The control simulation for these experiments will use 1850concentrations of WMGHGs and emissions of NTCFs, run for 30 years in atmosphere-only mode with SSTs and sea ice prescribed as a (monthly varying) climatology taken from 30 years of the pre-industrial control (experiment piClim-control; see Table 6) following the Radiative Forcing Model Intercomparison Project (RFMIP) specification (Pincus et al., 2016).
We have then to use the piClim-control
- Anne
- ask Arnaud path for the official ipslcm6 picontrol simulation. --> path send by email 20200504
- 2020504 : Arnaud
J'ai fait les xmls pour 30 ans de 1850 à 1879 mais vous pouvez prendre une autre periode de 30 ans que celle-là si vous le souhaitez...à la fois par rapport au protocole demandé mais peut etre aussi par rapport à la periode de 30 ans du picontrol de laquelle vous voulez extraire les sst de forcage (peut etre que certains 30 ans sont "mieux" que d'autres"...)...
Translation :
I did xmls files for 30 years from 1850 to 1879, but you can use an other 30 years periods than this one if the protocol ask it, or if you prefer an other period from the picontrol simulation
3.b AER
- pi / pd
- Ramiro do you have files for these two inputs files ?
The links I have added to the table indicates the input needed by each simulation. piClim-control and piClim-aer. For piClim-control we need 1850 forcings, for piClim-aer the forcings are the same but aerosols emissions and precursors are from 2014.
4. Experiment directory
Add a new experiment directory for forced model : first commit
4.1 Questions to solve
- which ModelName in config.card ?
- which TagName in config.card ?
--> the answer to the ping files give some clues. We need to take same parameter than for coupled model
2020/05/01 : make modification in experiment directory and change name of this directory to be coherent with the type of experiment : piclim-control instead of picontrol
see here
5. before launch a simulation
official ipsl check https://forge.ipsl.jussieu.fr/igcmg/wiki/IPSLCM6/IPSL-CM6A-LR#Checklist
6. IPSLCM6-AER piClim-AER and piClim-control
Here it is indicated the final setting derived from the previous steps.
6.1 piClim-control
LMDZ file | Source | Simulation | Changes | Info | LINK |
---|---|---|---|---|---|
limit.nc | ELC-144x142x79_clim_limit.nc | CM61-LR-pi-03 | None | Previous Ramiro version 30yr discarded. | Official Description |
solarforcing.nc | solarforcing_v3.1_piControl_ave_6bands_366days.nc | SOLAR-CMIP6-v3.1corr | None | piControl | |
taulwstrat.2D.nc | taulwstrat.2D.ave.nc | STRATAERO-CMIP6-v3 | None | pi? | |
tauwwstrat.2D.nc | tauswstrat.2D.ave.nc | STRATAERO-CMIP6-v3 | None | pi? | |
climoz_LMDZ.nc | climoz_LMDZ_1850_1850_clim.nc | historical.v20160711.v2 | None | UoR | |
cfsites_grid.nc | cfsites_grid_CMIP6.nc | SITES | None | pi? | |
startphy.nc | CM61-pre-pi-01_18491231_restartphy.nc | IPSLCM6 | None | ||
start.nc | CM61-pre-pi-01_18491231_restart.nc | IPSLCM6 | None |
INCA file | Source | Version | Changes | Info | LINK |
---|---|---|---|---|---|
sflx_ANT.nc | sflx_lmdz_ANT_1850_phy.nc | IPCC-AR6-SFLX-VERS2 | None | ||
sflx_BBG.nc | sflx_lmdz_BBG_1850_phy.nc | IPCC-AR6-SFLX-VERS2 | None | ||
aircraft_mth.nc | aircraft_1850_phy.nc | IPCC-AR6-AIRCRAFT | None | ||
oxydants.nc | oxydants_1850.nc | IPCC-AR6-OXYDANTS | None | ||
sflx_GHG.nc | sflx_lmdz_GHG.nc | IPCC-AR6-SFLX-VERS2 | None | ||
sflx_MISC.nc | sflx_lmdz_MISC.nc | IPCC-AR6-SFLX-VERS2 | None | ||
sflx_NAT.nc | sflx_lmdz_NAT.nc | IPCC-AR6-SFLX-VERS2 | None | ||
rhvEC.txt | rhvEC_v2.txt | None | |||
wthEC.txt | wthEC_v2.txt | None | |||
clyEC.txt | clyEC_v2.txt | None | |||
wth.dat | wth_v2.dat | None | |||
cly.dat | cly_v2.dat | None | |||
rhv.dat | rhv_v2.dat | None | |||
landuse.nc | landuse.nc | None | |||
phototable.dat | new_phototable.dat | None | |||
fq_antro.dat | scale_uniform_fact1.dat | None | Used for 2xDUST |
- Notes
- I have added the changes on the code to use the fq_antro.dat which is just a file to rescale the dust emission per grid cell. In principle only two files are needed one named scale_uniform_fact1.dat for all experiments. Other with scale_uniform_fact2.dat for the experiment 2xDUST
6.2 piClim-AER
DIFFERENCE with piClim-control
INCA file | Source | Version | Changes | Info | LINK |
---|---|---|---|---|---|
sflx_ANT.nc | sflx_lmdz_ANT_2014_phy.nc | IPCC-AR6-SFLX-VERS2 | None | ||
sflx_BBG.nc | sflx_lmdz_BBG_2014_phy.nc | IPCC-AR6-SFLX-VERS2 | None | ||
aircraft_mth.nc | aircraft_2014_phy.nc | IPCC-AR6-AIRCRAFT | None | ||
oxydants.nc | oxydants_2014.nc | IPCC-AR6-OXYDANTS | None |
COMMON with piClim-control
INCA file | Source | Version | Changes | Info | LINK |
---|
sflx_GHG.nc | sflx_lmdz_GHG.nc | IPCC-AR6-SFLX-VERS2 | None | ||
sflx_MISC.nc | sflx_lmdz_MISC.nc | IPCC-AR6-SFLX-VERS2 | None | ||
sflx_NAT.nc | sflx_lmdz_NAT.nc | IPCC-AR6-SFLX-VERS2 | None |
- Note
- By exploring the files oxydants and aircarft they may contain aerosol precursors (used or not by the AER part) so
I have indicated them to be from 2014 according to description of experiment.
7. IPSLCM6-AER (Second set of simulations)
Name | Tier | Min. Config | Period | Kind | Notes |
---|---|---|---|---|---|
piClim-2xDust | 2 | Atm+Aer | 30 years | Fixed SST ERF | PI-sst, PI forcing, 2x dust emission |
piClim-2xSS | 2 | Atm+Aer | 30 years | Fixed SST ERF | PI-sst, PI forcing, 2x ss emission |
piClim-2xDMS | 3 | Atm+Aer | 30 years | Fixed SST ERF | PI-sst, PI forcing, 2x DMS emission |
piClim-BC | 2 | Atm+Aer | 30 years | Fixed SST ERF | PI-sst, PI forcing, 2014 BC emission |
piClim-NTCF | 1 | Atm+Aer | 30 years | Fixed SST ERF | PI-sst, PI forcing, 2014 NTCF emission |
piClim-SO2 | 3 | Atm+Aer | 30 years | Fixed SST ERF | PI-sst, PI forcing, 2014 SO2 emission |
piClim-OC | 3 | Atm+Aer | 30 years | Fixed SST ERF | PI-sst, PI forcing, 2014 OC emission |
piClim-NOx | 3 | Atm+Aer | 30 years | Fixed SST ERF | PI-sst, PI forcing, 2014 NOx emission |
piClim-NH3 | 3 | Atm+Aer | 30 years | Fixed SST ERF | PI-sst, PI forcing, 2014 NH3 emission |
All this set of simulations needs a change in the code (for example to have x2 SS) or in the forcings (or even in both) |
Attachments (21)
- AerChemMIP_comparison_load.txt (5.3 KB) - added by ramiro 4 years ago.
-
out_prePARE_30yr_piClim-SO2.log
(17.8 KB) -
added by ramiro 4 years ago.
Results of prePARE script for piClim0SO2
-
out_prePARE_30yr_piClim-OC.log
(17.8 KB) -
added by ramiro 4 years ago.
Results of prePARE script for piClim-OC
-
out_prePARE_30yr_piClim-NH3.log
(17.8 KB) -
added by ramiro 4 years ago.
Results of prePARE script for piClim-NH3
-
out_prePARE_30yr_piClim-BC.log
(17.8 KB) -
added by ramiro 4 years ago.
Results of prePARE script for piClim-BC
-
out_prePARE_30yr_piClim-2xss.log
(17.8 KB) -
added by ramiro 4 years ago.
Results of prePARE script for piClim-2xss
-
out_prePARE_30yr_piClim-2xdust.log
(17.8 KB) -
added by ramiro 4 years ago.
Results of prePARE script for piClim-2xdust
-
out_check_30yr_piClim-SO2.log
(58.0 KB) -
added by ramiro 4 years ago.
Results of check-CMIP6 script for piClim-SO2 after 30 years
-
out_check_30yr_piClim-OC.log
(58.5 KB) -
added by ramiro 4 years ago.
Results of check-CMIP6 script for piClim-OC after 30 years
-
out_check_30yr_piClim-NH3.log
(58.5 KB) -
added by ramiro 4 years ago.
Results of check-CMIP6 script for piClim-NH3 after 30 years
-
out_check_30yr_piClim-BC.log
(58.5 KB) -
added by ramiro 4 years ago.
Results of check-CMIP6 script for piClim-BC after 30 years
-
out_check_30yr_piClim-2xss.log
(58.6 KB) -
added by ramiro 4 years ago.
Results of check-CMIP6 script for piClim-2xss after 30 years
-
out_check_30yr_piClim-2xdust.log
(58.6 KB) -
added by ramiro 4 years ago.
Results of check-CMIP6 script for piClim-2xdust after 30 years
-
AerChemMIP_comparison_emidep.txt
(52.0 KB) -
added by ramiro 4 years ago.
Comparison of piClim with aerocom note that piClim are in general those from updated simulations (-vF) those with piclim are from v2 simulations (so before correction emioa and emibc)
-
out_prePARE_30yr_piClim-control-vF.log
(11.7 KB) -
added by ramiro 4 years ago.
Results of prePARE script for piClim-control (vF)
-
out_30yr_piClim-control-vF.log
(42.2 KB) -
added by ramiro 4 years ago.
Results of check-CMIP6 script for piClim-control after 30 years
-
batch_prePARE_CMIP6.sh
(3.8 KB) -
added by ramiro 4 years ago.
Script to prePARE simulations (Ramiro Checa-Garcia)
-
check_CMIP6.sh
(4.2 KB) -
added by ramiro 4 years ago.
Script to check CMIP6 simulations (Ramiro Checa-Garcia)
-
out_prePARE_30yr_piClim-aer-vF.log
(11.7 KB) -
added by ramiro 4 years ago.
Results of prePARE script for piClim-aer
-
out_30yr_piClim-AER-vF.log
(42.2 KB) -
added by ramiro 4 years ago.
Results of check-CMIP6 script for piClim-aer after 30 years
-
AerChemMIP_comparison.txt
(59.8 KB) -
added by ramiro 3 years ago.
CHECK comparisons of AerChemMIP piClim and historical simulations with INCA-AER from AEROCOM
Download all attachments as: .zip