source: XIOS/dev/dev_cmip6_omp/Doxyfile @ 1606

Last change on this file since 1606 was 1130, checked in by oabramkina, 3 years ago

Two-level server: merging new grid functionalities and changes in the communication protocol (e.g. non-blocking context finalize, registries, oasis).

Tests on curie: test_client, test_complete, nemo (test_xios2_cmip6.exe).

To do: non-structured grid, check reading, possible bug in client/server initialization (?).

File size: 71.9 KB
Line 
1# Doxyfile 1.7.4
2
3# This file describes the settings to be used by the documentation system
4# doxygen (www.doxygen.org) for a project
5#
6# All text after a hash (#) is considered a comment and will be ignored
7# The format is:
8#       TAG = value [value, ...]
9# For lists items can also be appended using:
10#       TAG += value [value, ...]
11# Values that contain spaces should be placed between quotes (" ")
12
13#---------------------------------------------------------------------------
14# Project related configuration options
15#---------------------------------------------------------------------------
16
17# This tag specifies the encoding used for all characters in the config file
18# that follow. The default is UTF-8 which is also the encoding used for all
19# text before the first occurrence of this tag. Doxygen uses libiconv (or the
20# iconv built into libc) for the transcoding. See
21# http://www.gnu.org/software/libiconv for the list of possible encodings.
22
23DOXYFILE_ENCODING      = UTF-8
24
25# The PROJECT_NAME tag is a single word (or a sequence of words surrounded
26# by quotes) that should identify the project.
27
28PROJECT_NAME           = XIOS
29
30# The PROJECT_NUMBER tag can be used to enter a project or revision number.
31# This could be handy for archiving the generated documentation or
32# if some version control system is used.
33
34PROJECT_NUMBER         = 1.0
35
36# Using the PROJECT_BRIEF tag one can provide an optional one line description
37# for a project that appears at the top of each page and should give viewer
38# a quick idea about the purpose of the project. Keep the description short.
39
40PROJECT_BRIEF          = "Xml I/O Server"
41
42# With the PROJECT_LOGO tag one can specify an logo or icon that is
43# included in the documentation. The maximum height of the logo should not
44# exceed 55 pixels and the maximum width should not exceed 200 pixels.
45# Doxygen will copy the logo to the output directory.
46
47PROJECT_LOGO           =
48
49# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
50# base path where the generated documentation will be put.
51# If a relative path is entered, it will be relative to the location
52# where doxygen was started. If left blank the current directory will be used.
53
54OUTPUT_DIRECTORY       = ./doc
55
56# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
57# 4096 sub-directories (in 2 levels) under the output directory of each output
58# format and will distribute the generated files over these directories.
59# Enabling this option can be useful when feeding doxygen a huge amount of
60# source files, where putting all generated files in the same directory would
61# otherwise cause performance problems for the file system.
62
63CREATE_SUBDIRS         = NO
64
65# The OUTPUT_LANGUAGE tag is used to specify the language in which all
66# documentation generated by doxygen is written. Doxygen will use this
67# information to generate all constant output in the proper language.
68# The default language is English, other supported languages are:
69# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
70# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German,
71# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English
72# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian,
73# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak,
74# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese.
75
76OUTPUT_LANGUAGE        = French
77
78# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
79# include brief member descriptions after the members that are listed in
80# the file and class documentation (similar to JavaDoc).
81# Set to NO to disable this.
82
83BRIEF_MEMBER_DESC      = YES
84
85# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
86# the brief description of a member or function before the detailed description.
87# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
88# brief descriptions will be completely suppressed.
89
90REPEAT_BRIEF           = YES
91
92# This tag implements a quasi-intelligent brief description abbreviator
93# that is used to form the text in various listings. Each string
94# in this list, if found as the leading text of the brief description, will be
95# stripped from the text and the result after processing the whole list, is
96# used as the annotated text. Otherwise, the brief description is used as-is.
97# If left blank, the following values are used ("$name" is automatically
98# replaced with the name of the entity): "The $name class" "The $name widget"
99# "The $name file" "is" "provides" "specifies" "contains"
100# "represents" "a" "an" "the"
101
102ABBREVIATE_BRIEF       = "The $name class" \
103                         "The $name widget" \
104                         "The $name file" \
105                         is \
106                         provides \
107                         specifies \
108                         contains \
109                         represents \
110                         a \
111                         an \
112                         the
113
114# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
115# Doxygen will generate a detailed section even if there is only a brief
116# description.
117
118ALWAYS_DETAILED_SEC    = NO
119
120# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
121# inherited members of a class in the documentation of that class as if those
122# members were ordinary class members. Constructors, destructors and assignment
123# operators of the base classes will not be shown.
124
125INLINE_INHERITED_MEMB  = NO
126
127# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
128# path before files name in the file list and in the header files. If set
129# to NO the shortest path that makes the file name unique will be used.
130
131FULL_PATH_NAMES        = YES
132
133# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
134# can be used to strip a user-defined part of the path. Stripping is
135# only done if one of the specified strings matches the left-hand part of
136# the path. The tag can be used to show relative paths in the file list.
137# If left blank the directory from which doxygen is run is used as the
138# path to strip.
139
140STRIP_FROM_PATH        =
141
142# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
143# the path mentioned in the documentation of a class, which tells
144# the reader which header file to include in order to use a class.
145# If left blank only the name of the header file containing the class
146# definition is used. Otherwise one should specify the include paths that
147# are normally passed to the compiler using the -I flag.
148
149STRIP_FROM_INC_PATH    =
150
151# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
152# (but less readable) file names. This can be useful if your file system
153# doesn't support long names like on DOS, Mac, or CD-ROM.
154
155SHORT_NAMES            = NO
156
157# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
158# will interpret the first line (until the first dot) of a JavaDoc-style
159# comment as the brief description. If set to NO, the JavaDoc
160# comments will behave just like regular Qt-style comments
161# (thus requiring an explicit @brief command for a brief description.)
162
163JAVADOC_AUTOBRIEF      = NO
164
165# If the QT_AUTOBRIEF tag is set to YES then Doxygen will
166# interpret the first line (until the first dot) of a Qt-style
167# comment as the brief description. If set to NO, the comments
168# will behave just like regular Qt-style comments (thus requiring
169# an explicit \brief command for a brief description.)
170
171QT_AUTOBRIEF           = YES
172
173# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
174# treat a multi-line C++ special comment block (i.e. a block of //! or ///
175# comments) as a brief description. This used to be the default behaviour.
176# The new default is to treat a multi-line C++ comment block as a detailed
177# description. Set this tag to YES if you prefer the old behaviour instead.
178
179MULTILINE_CPP_IS_BRIEF = NO
180
181# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
182# member inherits the documentation from any documented member that it
183# re-implements.
184
185INHERIT_DOCS           = YES
186
187# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
188# a new page for each member. If set to NO, the documentation of a member will
189# be part of the file/class/namespace that contains it.
190
191SEPARATE_MEMBER_PAGES  = NO
192
193# The TAB_SIZE tag can be used to set the number of spaces in a tab.
194# Doxygen uses this value to replace tabs by spaces in code fragments.
195
196TAB_SIZE               = 8
197
198# This tag can be used to specify a number of aliases that acts
199# as commands in the documentation. An alias has the form "name=value".
200# For example adding "sideeffect=\par Side Effects:\n" will allow you to
201# put the command \sideeffect (or @sideeffect) in the documentation, which
202# will result in a user-defined paragraph with heading "Side Effects:".
203# You can put \n's in the value part of an alias to insert newlines.
204
205ALIASES                =
206
207# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
208# sources only. Doxygen will then generate output that is more tailored for C.
209# For instance, some of the names that are used will be different. The list
210# of all members will be omitted, etc.
211
212OPTIMIZE_OUTPUT_FOR_C  = NO
213
214# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
215# sources only. Doxygen will then generate output that is more tailored for
216# Java. For instance, namespaces will be presented as packages, qualified
217# scopes will look different, etc.
218
219OPTIMIZE_OUTPUT_JAVA   = NO
220
221# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
222# sources only. Doxygen will then generate output that is more tailored for
223# Fortran.
224
225OPTIMIZE_FOR_FORTRAN   = NO
226
227# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
228# sources. Doxygen will then generate output that is tailored for
229# VHDL.
230
231OPTIMIZE_OUTPUT_VHDL   = NO
232
233# Doxygen selects the parser to use depending on the extension of the files it
234# parses. With this tag you can assign which parser to use for a given extension.
235# Doxygen has a built-in mapping, but you can override or extend it using this
236# tag. The format is ext=language, where ext is a file extension, and language
237# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C,
238# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make
239# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C
240# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions
241# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen.
242
243EXTENSION_MAPPING      =
244
245# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
246# to include (a tag file for) the STL sources as input, then you should
247# set this tag to YES in order to let doxygen match functions declarations and
248# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
249# func(std::string) {}). This also makes the inheritance and collaboration
250# diagrams that involve STL classes more complete and accurate.
251
252BUILTIN_STL_SUPPORT    = YES
253
254# If you use Microsoft's C++/CLI language, you should set this option to YES to
255# enable parsing support.
256
257CPP_CLI_SUPPORT        = NO
258
259# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.
260# Doxygen will parse them like normal C++ but will assume all classes use public
261# instead of private inheritance when no explicit protection keyword is present.
262
263SIP_SUPPORT            = NO
264
265# For Microsoft's IDL there are propget and propput attributes to indicate getter
266# and setter methods for a property. Setting this option to YES (the default)
267# will make doxygen replace the get and set methods by a property in the
268# documentation. This will only work if the methods are indeed getting or
269# setting a simple type. If this is not the case, or you want to show the
270# methods anyway, you should set this option to NO.
271
272IDL_PROPERTY_SUPPORT   = YES
273
274# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
275# tag is set to YES, then doxygen will reuse the documentation of the first
276# member in the group (if any) for the other members of the group. By default
277# all members of a group must be documented explicitly.
278
279DISTRIBUTE_GROUP_DOC   = NO
280
281# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
282# the same type (for instance a group of public functions) to be put as a
283# subgroup of that type (e.g. under the Public Functions section). Set it to
284# NO to prevent subgrouping. Alternatively, this can be done per class using
285# the \nosubgrouping command.
286
287SUBGROUPING            = YES
288
289# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and
290# unions are shown inside the group in which they are included (e.g. using
291# @ingroup) instead of on a separate page (for HTML and Man pages) or
292# section (for LaTeX and RTF).
293
294INLINE_GROUPED_CLASSES = NO
295
296# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum
297# is documented as struct, union, or enum with the name of the typedef. So
298# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
299# with name TypeT. When disabled the typedef will appear as a member of a file,
300# namespace, or class. And the struct will be named TypeS. This can typically
301# be useful for C code in case the coding convention dictates that all compound
302# types are typedef'ed and only the typedef is referenced, never the tag name.
303
304TYPEDEF_HIDES_STRUCT   = NO
305
306# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to
307# determine which symbols to keep in memory and which to flush to disk.
308# When the cache is full, less often used symbols will be written to disk.
309# For small to medium size projects (<1000 input files) the default value is
310# probably good enough. For larger projects a too small cache size can cause
311# doxygen to be busy swapping symbols to and from disk most of the time
312# causing a significant performance penalty.
313# If the system has enough physical memory increasing the cache will improve the
314# performance by keeping more symbols in memory. Note that the value works on
315# a logarithmic scale so increasing the size by one will roughly double the
316# memory usage. The cache size is given by this formula:
317# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,
318# corresponding to a cache size of 2^16 = 65536 symbols
319
320SYMBOL_CACHE_SIZE      = 0
321
322#---------------------------------------------------------------------------
323# Build related configuration options
324#---------------------------------------------------------------------------
325
326# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
327# documentation are documented, even if no documentation was available.
328# Private class members and static file members will be hidden unless
329# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
330
331EXTRACT_ALL            = YES
332
333# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
334# will be included in the documentation.
335
336EXTRACT_PRIVATE        = YES
337
338# If the EXTRACT_STATIC tag is set to YES all static members of a file
339# will be included in the documentation.
340
341EXTRACT_STATIC         = YES
342
343# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
344# defined locally in source files will be included in the documentation.
345# If set to NO only classes defined in header files are included.
346
347EXTRACT_LOCAL_CLASSES  = YES
348
349# This flag is only useful for Objective-C code. When set to YES local
350# methods, which are defined in the implementation section but not in
351# the interface are included in the documentation.
352# If set to NO (the default) only methods in the interface are included.
353
354EXTRACT_LOCAL_METHODS  = YES
355
356# If this flag is set to YES, the members of anonymous namespaces will be
357# extracted and appear in the documentation as a namespace called
358# 'anonymous_namespace{file}', where file will be replaced with the base
359# name of the file that contains the anonymous namespace. By default
360# anonymous namespaces are hidden.
361
362EXTRACT_ANON_NSPACES   = NO
363
364# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
365# undocumented members of documented classes, files or namespaces.
366# If set to NO (the default) these members will be included in the
367# various overviews, but no documentation section is generated.
368# This option has no effect if EXTRACT_ALL is enabled.
369
370HIDE_UNDOC_MEMBERS     = NO
371
372# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
373# undocumented classes that are normally visible in the class hierarchy.
374# If set to NO (the default) these classes will be included in the various
375# overviews. This option has no effect if EXTRACT_ALL is enabled.
376
377HIDE_UNDOC_CLASSES     = NO
378
379# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
380# friend (class|struct|union) declarations.
381# If set to NO (the default) these declarations will be included in the
382# documentation.
383
384HIDE_FRIEND_COMPOUNDS  = NO
385
386# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
387# documentation blocks found inside the body of a function.
388# If set to NO (the default) these blocks will be appended to the
389# function's detailed documentation block.
390
391HIDE_IN_BODY_DOCS      = NO
392
393# The INTERNAL_DOCS tag determines if documentation
394# that is typed after a \internal command is included. If the tag is set
395# to NO (the default) then the documentation will be excluded.
396# Set it to YES to include the internal documentation.
397
398INTERNAL_DOCS          = NO
399
400# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
401# file names in lower-case letters. If set to YES upper-case letters are also
402# allowed. This is useful if you have classes or files whose names only differ
403# in case and if your file system supports case sensitive file names. Windows
404# and Mac users are advised to set this option to NO.
405
406CASE_SENSE_NAMES       = NO
407
408# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
409# will show members with their full class and namespace scopes in the
410# documentation. If set to YES the scope will be hidden.
411
412HIDE_SCOPE_NAMES       = NO
413
414# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
415# will put a list of the files that are included by a file in the documentation
416# of that file.
417
418SHOW_INCLUDE_FILES     = YES
419
420# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen
421# will list include files with double quotes in the documentation
422# rather than with sharp brackets.
423
424FORCE_LOCAL_INCLUDES   = NO
425
426# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
427# is inserted in the documentation for inline members.
428
429INLINE_INFO            = YES
430
431# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
432# will sort the (detailed) documentation of file and class members
433# alphabetically by member name. If set to NO the members will appear in
434# declaration order.
435
436SORT_MEMBER_DOCS       = YES
437
438# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
439# brief documentation of file, namespace and class members alphabetically
440# by member name. If set to NO (the default) the members will appear in
441# declaration order.
442
443SORT_BRIEF_DOCS        = NO
444
445# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen
446# will sort the (brief and detailed) documentation of class members so that
447# constructors and destructors are listed first. If set to NO (the default)
448# the constructors will appear in the respective orders defined by
449# SORT_MEMBER_DOCS and SORT_BRIEF_DOCS.
450# This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO
451# and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO.
452
453SORT_MEMBERS_CTORS_1ST = NO
454
455# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the
456# hierarchy of group names into alphabetical order. If set to NO (the default)
457# the group names will appear in their defined order.
458
459SORT_GROUP_NAMES       = NO
460
461# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
462# sorted by fully-qualified names, including namespaces. If set to
463# NO (the default), the class list will be sorted only by class name,
464# not including the namespace part.
465# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
466# Note: This option applies only to the class list, not to the
467# alphabetical list.
468
469SORT_BY_SCOPE_NAME     = NO
470
471# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to
472# do proper type resolution of all parameters of a function it will reject a
473# match between the prototype and the implementation of a member function even
474# if there is only one candidate or it is obvious which candidate to choose
475# by doing a simple string match. By disabling STRICT_PROTO_MATCHING doxygen
476# will still accept a match between prototype and implementation in such cases.
477
478STRICT_PROTO_MATCHING  = NO
479
480# The GENERATE_TODOLIST tag can be used to enable (YES) or
481# disable (NO) the todo list. This list is created by putting \todo
482# commands in the documentation.
483
484GENERATE_TODOLIST      = YES
485
486# The GENERATE_TESTLIST tag can be used to enable (YES) or
487# disable (NO) the test list. This list is created by putting \test
488# commands in the documentation.
489
490GENERATE_TESTLIST      = YES
491
492# The GENERATE_BUGLIST tag can be used to enable (YES) or
493# disable (NO) the bug list. This list is created by putting \bug
494# commands in the documentation.
495
496GENERATE_BUGLIST       = YES
497
498# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
499# disable (NO) the deprecated list. This list is created by putting
500# \deprecated commands in the documentation.
501
502GENERATE_DEPRECATEDLIST= YES
503
504# The ENABLED_SECTIONS tag can be used to enable conditional
505# documentation sections, marked by \if sectionname ... \endif.
506
507ENABLED_SECTIONS       =
508
509# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
510# the initial value of a variable or macro consists of for it to appear in
511# the documentation. If the initializer consists of more lines than specified
512# here it will be hidden. Use a value of 0 to hide initializers completely.
513# The appearance of the initializer of individual variables and macros in the
514# documentation can be controlled using \showinitializer or \hideinitializer
515# command in the documentation regardless of this setting.
516
517MAX_INITIALIZER_LINES  = 30
518
519# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
520# at the bottom of the documentation of classes and structs. If set to YES the
521# list will mention the files that were used to generate the documentation.
522
523SHOW_USED_FILES        = YES
524
525# If the sources in your project are distributed over multiple directories
526# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
527# in the documentation. The default is NO.
528
529SHOW_DIRECTORIES       = YES
530
531# Set the SHOW_FILES tag to NO to disable the generation of the Files page.
532# This will remove the Files entry from the Quick Index and from the
533# Folder Tree View (if specified). The default is YES.
534
535SHOW_FILES             = YES
536
537# Set the SHOW_NAMESPACES tag to NO to disable the generation of the
538# Namespaces page.  This will remove the Namespaces entry from the Quick Index
539# and from the Folder Tree View (if specified). The default is YES.
540
541SHOW_NAMESPACES        = YES
542
543# The FILE_VERSION_FILTER tag can be used to specify a program or script that
544# doxygen should invoke to get the current version for each file (typically from
545# the version control system). Doxygen will invoke the program by executing (via
546# popen()) the command <command> <input-file>, where <command> is the value of
547# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
548# provided by doxygen. Whatever the program writes to standard output
549# is used as the file version. See the manual for examples.
550
551FILE_VERSION_FILTER    =
552
553# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
554# by doxygen. The layout file controls the global structure of the generated
555# output files in an output format independent way. The create the layout file
556# that represents doxygen's defaults, run doxygen with the -l option.
557# You can optionally specify a file name after the option, if omitted
558# DoxygenLayout.xml will be used as the name of the layout file.
559
560LAYOUT_FILE            =
561
562#---------------------------------------------------------------------------
563# configuration options related to warning and progress messages
564#---------------------------------------------------------------------------
565
566# The QUIET tag can be used to turn on/off the messages that are generated
567# by doxygen. Possible values are YES and NO. If left blank NO is used.
568
569QUIET                  = NO
570
571# The WARNINGS tag can be used to turn on/off the warning messages that are
572# generated by doxygen. Possible values are YES and NO. If left blank
573# NO is used.
574
575WARNINGS               = YES
576
577# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
578# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
579# automatically be disabled.
580
581WARN_IF_UNDOCUMENTED   = YES
582
583# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
584# potential errors in the documentation, such as not documenting some
585# parameters in a documented function, or documenting parameters that
586# don't exist or using markup commands wrongly.
587
588WARN_IF_DOC_ERROR      = YES
589
590# The WARN_NO_PARAMDOC option can be enabled to get warnings for
591# functions that are documented, but have no documentation for their parameters
592# or return value. If set to NO (the default) doxygen will only warn about
593# wrong or incomplete parameter documentation, but not about the absence of
594# documentation.
595
596WARN_NO_PARAMDOC       = YES
597
598# The WARN_FORMAT tag determines the format of the warning messages that
599# doxygen can produce. The string should contain the $file, $line, and $text
600# tags, which will be replaced by the file and line number from which the
601# warning originated and the warning text. Optionally the format may contain
602# $version, which will be replaced by the version of the file (if it could
603# be obtained via FILE_VERSION_FILTER)
604
605WARN_FORMAT            = "$file:$line: $text"
606
607# The WARN_LOGFILE tag can be used to specify a file to which warning
608# and error messages should be written. If left blank the output is written
609# to stderr.
610
611WARN_LOGFILE           =
612
613#---------------------------------------------------------------------------
614# configuration options related to the input files
615#---------------------------------------------------------------------------
616
617# The INPUT tag can be used to specify the files and/or directories that contain
618# documented source files. You may enter file names like "myfile.cpp" or
619# directories like "/usr/src/myproject". Separate the files or directories
620# with spaces.
621
622INPUT                  = src
623
624# This tag can be used to specify the character encoding of the source files
625# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is
626# also the default input encoding. Doxygen uses libiconv (or the iconv built
627# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for
628# the list of possible encodings.
629
630INPUT_ENCODING         = UTF-8
631
632# If the value of the INPUT tag contains directories, you can use the
633# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
634# and *.h) to filter out the source-files in the directories. If left
635# blank the following patterns are tested:
636# *.c *.cc *.cxx *.cpp *.c++ *.d *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh
637# *.hxx *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.dox *.py
638# *.f90 *.f *.for *.vhd *.vhdl
639
640FILE_PATTERNS          = *.cpp \
641                         *.hpp \
642                         *.conf
643
644# The RECURSIVE tag can be used to turn specify whether or not subdirectories
645# should be searched for input files as well. Possible values are YES and NO.
646# If left blank NO is used.
647
648RECURSIVE              = YES
649
650# The EXCLUDE tag can be used to specify files and/or directories that should
651# excluded from the INPUT source files. This way you can easily exclude a
652# subdirectory from a directory tree whose root is specified with the INPUT tag.
653
654EXCLUDE                =
655
656# The EXCLUDE_SYMLINKS tag can be used select whether or not files or
657# directories that are symbolic links (a Unix file system feature) are excluded
658# from the input.
659
660EXCLUDE_SYMLINKS       = NO
661
662# If the value of the INPUT tag contains directories, you can use the
663# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
664# certain files from those directories. Note that the wildcards are matched
665# against the file with absolute path, so to exclude all test directories
666# for example use the pattern */test/*
667
668EXCLUDE_PATTERNS       =
669
670# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
671# (namespaces, classes, functions, etc.) that should be excluded from the
672# output. The symbol name can be a fully qualified name, a word, or if the
673# wildcard * is used, a substring. Examples: ANamespace, AClass,
674# AClass::ANamespace, ANamespace::*Test
675
676EXCLUDE_SYMBOLS        =
677
678# The EXAMPLE_PATH tag can be used to specify one or more files or
679# directories that contain example code fragments that are included (see
680# the \include command).
681
682EXAMPLE_PATH           =
683
684# If the value of the EXAMPLE_PATH tag contains directories, you can use the
685# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
686# and *.h) to filter out the source-files in the directories. If left
687# blank all files are included.
688
689EXAMPLE_PATTERNS       = *
690
691# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
692# searched for input files to be used with the \include or \dontinclude
693# commands irrespective of the value of the RECURSIVE tag.
694# Possible values are YES and NO. If left blank NO is used.
695
696EXAMPLE_RECURSIVE      = NO
697
698# The IMAGE_PATH tag can be used to specify one or more files or
699# directories that contain image that are included in the documentation (see
700# the \image command).
701
702IMAGE_PATH             =
703
704# The INPUT_FILTER tag can be used to specify a program that doxygen should
705# invoke to filter for each input file. Doxygen will invoke the filter program
706# by executing (via popen()) the command <filter> <input-file>, where <filter>
707# is the value of the INPUT_FILTER tag, and <input-file> is the name of an
708# input file. Doxygen will then use the output that the filter program writes
709# to standard output.  If FILTER_PATTERNS is specified, this tag will be
710# ignored.
711
712INPUT_FILTER           =
713
714# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
715# basis.  Doxygen will compare the file name with each pattern and apply the
716# filter if there is a match.  The filters are a list of the form:
717# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
718# info on how filters are used. If FILTER_PATTERNS is empty or if
719# non of the patterns match the file name, INPUT_FILTER is applied.
720
721FILTER_PATTERNS        =
722
723# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
724# INPUT_FILTER) will be used to filter the input files when producing source
725# files to browse (i.e. when SOURCE_BROWSER is set to YES).
726
727FILTER_SOURCE_FILES    = NO
728
729# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
730# pattern. A pattern will override the setting for FILTER_PATTERN (if any)
731# and it is also possible to disable source filtering for a specific pattern
732# using *.ext= (so without naming a filter). This option only has effect when
733# FILTER_SOURCE_FILES is enabled.
734
735FILTER_SOURCE_PATTERNS =
736
737#---------------------------------------------------------------------------
738# configuration options related to source browsing
739#---------------------------------------------------------------------------
740
741# If the SOURCE_BROWSER tag is set to YES then a list of source files will
742# be generated. Documented entities will be cross-referenced with these sources.
743# Note: To get rid of all source code in the generated output, make sure also
744# VERBATIM_HEADERS is set to NO.
745
746SOURCE_BROWSER         = YES
747
748# Setting the INLINE_SOURCES tag to YES will include the body
749# of functions and classes directly in the documentation.
750
751INLINE_SOURCES         = NO
752
753# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
754# doxygen to hide any special comment blocks from generated source code
755# fragments. Normal C and C++ comments will always remain visible.
756
757STRIP_CODE_COMMENTS    = YES
758
759# If the REFERENCED_BY_RELATION tag is set to YES
760# then for each documented function all documented
761# functions referencing it will be listed.
762
763REFERENCED_BY_RELATION = YES
764
765# If the REFERENCES_RELATION tag is set to YES
766# then for each documented function all documented entities
767# called/used by that function will be listed.
768
769REFERENCES_RELATION    = YES
770
771# If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
772# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
773# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
774# link to the source code.  Otherwise they will link to the documentation.
775
776REFERENCES_LINK_SOURCE = YES
777
778# If the USE_HTAGS tag is set to YES then the references to source code
779# will point to the HTML generated by the htags(1) tool instead of doxygen
780# built-in source browser. The htags tool is part of GNU's global source
781# tagging system (see http://www.gnu.org/software/global/global.html). You
782# will need version 4.8.6 or higher.
783
784USE_HTAGS              = NO
785
786# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
787# will generate a verbatim copy of the header file for each class for
788# which an include is specified. Set to NO to disable this.
789
790VERBATIM_HEADERS       = YES
791
792#---------------------------------------------------------------------------
793# configuration options related to the alphabetical class index
794#---------------------------------------------------------------------------
795
796# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
797# of all compounds will be generated. Enable this if the project
798# contains a lot of classes, structs, unions or interfaces.
799
800ALPHABETICAL_INDEX     = YES
801
802# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
803# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
804# in which this list will be split (can be a number in the range [1..20])
805
806COLS_IN_ALPHA_INDEX    = 5
807
808# In case all classes in a project start with a common prefix, all
809# classes will be put under the same header in the alphabetical index.
810# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
811# should be ignored while generating the index headers.
812
813IGNORE_PREFIX          =
814
815#---------------------------------------------------------------------------
816# configuration options related to the HTML output
817#---------------------------------------------------------------------------
818
819# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
820# generate HTML output.
821
822GENERATE_HTML          = YES
823
824# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
825# If a relative path is entered the value of OUTPUT_DIRECTORY will be
826# put in front of it. If left blank `html' will be used as the default path.
827
828HTML_OUTPUT            = html
829
830# The HTML_FILE_EXTENSION tag can be used to specify the file extension for
831# each generated HTML page (for example: .htm,.php,.asp). If it is left blank
832# doxygen will generate files with .html extension.
833
834HTML_FILE_EXTENSION    = .html
835
836# The HTML_HEADER tag can be used to specify a personal HTML header for
837# each generated HTML page. If it is left blank doxygen will generate a
838# standard header. Note that when using a custom header you are responsible
839# for the proper inclusion of any scripts and style sheets that doxygen
840# needs, which is dependent on the configuration options used.
841# It is adviced to generate a default header using "doxygen -w html
842# header.html footer.html stylesheet.css YourConfigFile" and then modify
843# that header. Note that the header is subject to change so you typically
844# have to redo this when upgrading to a newer version of doxygen or when
845# changing the value of configuration settings such as GENERATE_TREEVIEW!
846
847HTML_HEADER            =
848
849# The HTML_FOOTER tag can be used to specify a personal HTML footer for
850# each generated HTML page. If it is left blank doxygen will generate a
851# standard footer.
852
853HTML_FOOTER            =
854
855# If the HTML_TIMESTAMP tag is set to YES then the generated HTML
856# documentation will contain the timesstamp.
857
858HTML_TIMESTAMP         = YES
859
860# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
861# style sheet that is used by each HTML page. It can be used to
862# fine-tune the look of the HTML output. If the tag is left blank doxygen
863# will generate a default style sheet. Note that doxygen will try to copy
864# the style sheet file to the HTML output directory, so don't put your own
865# stylesheet in the HTML output directory as well, or it will be erased!
866
867HTML_STYLESHEET        =
868
869# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
870# other source files which should be copied to the HTML output directory. Note
871# that these files will be copied to the base HTML output directory. Use the
872# $relpath$ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
873# files. In the HTML_STYLESHEET file, use the file name only. Also note that
874# the files will be copied as-is; there are no commands or markers available.
875
876HTML_EXTRA_FILES       =
877
878# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output.
879# Doxygen will adjust the colors in the stylesheet and background images
880# according to this color. Hue is specified as an angle on a colorwheel,
881# see http://en.wikipedia.org/wiki/Hue for more information.
882# For instance the value 0 represents red, 60 is yellow, 120 is green,
883# 180 is cyan, 240 is blue, 300 purple, and 360 is red again.
884# The allowed range is 0 to 359.
885
886HTML_COLORSTYLE_HUE    = 224
887
888# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of
889# the colors in the HTML output. For a value of 0 the output will use
890# grayscales only. A value of 255 will produce the most vivid colors.
891
892HTML_COLORSTYLE_SAT    = 63
893
894# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to
895# the luminance component of the colors in the HTML output. Values below
896# 100 gradually make the output lighter, whereas values above 100 make
897# the output darker. The value divided by 100 is the actual gamma applied,
898# so 80 represents a gamma of 0.8, The value 220 represents a gamma of 2.2,
899# and 100 does not change the gamma.
900
901HTML_COLORSTYLE_GAMMA  = 152
902
903# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
904# page will contain the date and time when the page was generated. Setting
905# this to NO can help when comparing the output of multiple runs.
906
907HTML_TIMESTAMP         = YES
908
909# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
910# files or namespaces will be aligned in HTML using tables. If set to
911# NO a bullet list will be used.
912
913HTML_ALIGN_MEMBERS     = YES
914
915# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
916# documentation will contain sections that can be hidden and shown after the
917# page has loaded. For this to work a browser that supports
918# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
919# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
920
921HTML_DYNAMIC_SECTIONS  = YES
922
923# If the GENERATE_DOCSET tag is set to YES, additional index files
924# will be generated that can be used as input for Apple's Xcode 3
925# integrated development environment, introduced with OSX 10.5 (Leopard).
926# To create a documentation set, doxygen will generate a Makefile in the
927# HTML output directory. Running make will produce the docset in that
928# directory and running "make install" will install the docset in
929# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find
930# it at startup.
931# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
932# for more information.
933
934GENERATE_DOCSET        = NO
935
936# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the
937# feed. A documentation feed provides an umbrella under which multiple
938# documentation sets from a single provider (such as a company or product suite)
939# can be grouped.
940
941DOCSET_FEEDNAME        = "Doxygen generated docs"
942
943# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that
944# should uniquely identify the documentation set bundle. This should be a
945# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen
946# will append .docset to the name.
947
948DOCSET_BUNDLE_ID       = org.doxygen.Project
949
950# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify
951# the documentation publisher. This should be a reverse domain-name style
952# string, e.g. com.mycompany.MyDocSet.documentation.
953
954DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
955
956# The GENERATE_PUBLISHER_NAME tag identifies the documentation publisher.
957
958DOCSET_PUBLISHER_NAME  = Publisher
959
960# If the GENERATE_HTMLHELP tag is set to YES, additional index files
961# will be generated that can be used as input for tools like the
962# Microsoft HTML help workshop to generate a compiled HTML help file (.chm)
963# of the generated HTML documentation.
964
965GENERATE_HTMLHELP      = NO
966
967# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
968# be used to specify the file name of the resulting .chm file. You
969# can add a path in front of the file if the result should not be
970# written to the html output directory.
971
972CHM_FILE               =
973
974# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
975# be used to specify the location (absolute path including file name) of
976# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
977# the HTML help compiler on the generated index.hhp.
978
979HHC_LOCATION           =
980
981# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
982# controls if a separate .chi index file is generated (YES) or that
983# it should be included in the master .chm file (NO).
984
985GENERATE_CHI           = NO
986
987# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING
988# is used to encode HtmlHelp index (hhk), content (hhc) and project file
989# content.
990
991CHM_INDEX_ENCODING     =
992
993# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
994# controls whether a binary table of contents is generated (YES) or a
995# normal table of contents (NO) in the .chm file.
996
997BINARY_TOC             = NO
998
999# The TOC_EXPAND flag can be set to YES to add extra items for group members
1000# to the contents of the HTML help documentation and to the tree view.
1001
1002TOC_EXPAND             = NO
1003
1004# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
1005# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated
1006# that can be used as input for Qt's qhelpgenerator to generate a
1007# Qt Compressed Help (.qch) of the generated HTML documentation.
1008
1009GENERATE_QHP           = NO
1010
1011# If the QHG_LOCATION tag is specified, the QCH_FILE tag can
1012# be used to specify the file name of the resulting .qch file.
1013# The path specified is relative to the HTML output folder.
1014
1015QCH_FILE               =
1016
1017# The QHP_NAMESPACE tag specifies the namespace to use when generating
1018# Qt Help Project output. For more information please see
1019# http://doc.trolltech.com/qthelpproject.html#namespace
1020
1021QHP_NAMESPACE          = org.doxygen.Project
1022
1023# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating
1024# Qt Help Project output. For more information please see
1025# http://doc.trolltech.com/qthelpproject.html#virtual-folders
1026
1027QHP_VIRTUAL_FOLDER     = doc
1028
1029# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to
1030# add. For more information please see
1031# http://doc.trolltech.com/qthelpproject.html#custom-filters
1032
1033QHP_CUST_FILTER_NAME   =
1034
1035# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the
1036# custom filter to add. For more information please see
1037# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">
1038# Qt Help Project / Custom Filters</a>.
1039
1040QHP_CUST_FILTER_ATTRS  =
1041
1042# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
1043# project's
1044# filter section matches.
1045# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">
1046# Qt Help Project / Filter Attributes</a>.
1047
1048QHP_SECT_FILTER_ATTRS  =
1049
1050# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can
1051# be used to specify the location of Qt's qhelpgenerator.
1052# If non-empty doxygen will try to run qhelpgenerator on the generated
1053# .qhp file.
1054
1055QHG_LOCATION           =
1056
1057# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files 
1058# will be generated, which together with the HTML files, form an Eclipse help
1059# plugin. To install this plugin and make it available under the help contents
1060# menu in Eclipse, the contents of the directory containing the HTML and XML
1061# files needs to be copied into the plugins directory of eclipse. The name of
1062# the directory within the plugins directory should be the same as
1063# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before
1064# the help appears.
1065
1066GENERATE_ECLIPSEHELP   = NO
1067
1068# A unique identifier for the eclipse help plugin. When installing the plugin
1069# the directory name containing the HTML and XML files should also have
1070# this name.
1071
1072ECLIPSE_DOC_ID         = org.doxygen.Project
1073
1074# The DISABLE_INDEX tag can be used to turn on/off the condensed index at
1075# top of each HTML page. The value NO (the default) enables the index and
1076# the value YES disables it.
1077
1078DISABLE_INDEX          = NO
1079
1080# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values
1081# (range [0,1..20]) that doxygen will group on one line in the generated HTML
1082# documentation. Note that a value of 0 will completely suppress the enum
1083# values from appearing in the overview section.
1084
1085ENUM_VALUES_PER_LINE   = 4
1086
1087# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
1088# structure should be generated to display hierarchical information.
1089# If the tag value is set to YES, a side panel will be generated
1090# containing a tree-like index structure (just like the one that
1091# is generated for HTML Help). For this to work a browser that supports
1092# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser).
1093# Windows users are probably better off using the HTML help feature.
1094
1095GENERATE_TREEVIEW      = YES
1096
1097# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,
1098# and Class Hierarchy pages using a tree view instead of an ordered list.
1099
1100USE_INLINE_TREES       = YES
1101
1102# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
1103# used to set the initial width (in pixels) of the frame in which the tree
1104# is shown.
1105
1106TREEVIEW_WIDTH         = 250
1107
1108# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open
1109# links to external symbols imported via tag files in a separate window.
1110
1111EXT_LINKS_IN_WINDOW    = NO
1112
1113# Use this tag to change the font size of Latex formulas included
1114# as images in the HTML documentation. The default is 10. Note that
1115# when you change the font size after a successful doxygen run you need
1116# to manually remove any form_*.png images from the HTML output directory
1117# to force them to be regenerated.
1118
1119FORMULA_FONTSIZE       = 10
1120
1121# Use the FORMULA_TRANPARENT tag to determine whether or not the images
1122# generated for formulas are transparent PNGs. Transparent PNGs are
1123# not supported properly for IE 6.0, but are supported on all modern browsers.
1124# Note that when changing this option you need to delete any form_*.png files
1125# in the HTML output before the changes have effect.
1126
1127FORMULA_TRANSPARENT    = YES
1128
1129# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax
1130# (see http://www.mathjax.org) which uses client side Javascript for the
1131# rendering instead of using prerendered bitmaps. Use this if you do not
1132# have LaTeX installed or if you want to formulas look prettier in the HTML
1133# output. When enabled you also need to install MathJax separately and
1134# configure the path to it using the MATHJAX_RELPATH option.
1135
1136USE_MATHJAX            = NO
1137
1138# When MathJax is enabled you need to specify the location relative to the
1139# HTML output directory using the MATHJAX_RELPATH option. The destination
1140# directory should contain the MathJax.js script. For instance, if the mathjax
1141# directory is located at the same level as the HTML output directory, then
1142# MATHJAX_RELPATH should be ../mathjax. The default value points to the
1143# mathjax.org site, so you can quickly see the result without installing
1144# MathJax, but it is strongly recommended to install a local copy of MathJax
1145# before deployment.
1146
1147MATHJAX_RELPATH        = http://www.mathjax.org/mathjax
1148
1149# When the SEARCHENGINE tag is enabled doxygen will generate a search box
1150# for the HTML output. The underlying search engine uses javascript
1151# and DHTML and should work on any modern browser. Note that when using
1152# HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets
1153# (GENERATE_DOCSET) there is already a search function so this one should
1154# typically be disabled. For large projects the javascript based search engine
1155# can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution.
1156
1157SEARCHENGINE           = YES
1158
1159# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
1160# implemented using a PHP enabled web server instead of at the web client
1161# using Javascript. Doxygen will generate the search PHP script and index
1162# file to put on the web server. The advantage of the server
1163# based approach is that it scales better to large projects and allows
1164# full text search. The disadvantages are that it is more difficult to setup
1165# and does not have live searching capabilities.
1166
1167SERVER_BASED_SEARCH    = NO
1168
1169#---------------------------------------------------------------------------
1170# configuration options related to the LaTeX output
1171#---------------------------------------------------------------------------
1172
1173# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
1174# generate Latex output.
1175
1176GENERATE_LATEX         = NO
1177
1178# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
1179# If a relative path is entered the value of OUTPUT_DIRECTORY will be
1180# put in front of it. If left blank `latex' will be used as the default path.
1181
1182LATEX_OUTPUT           = latex
1183
1184# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
1185# invoked. If left blank `latex' will be used as the default command name.
1186# Note that when enabling USE_PDFLATEX this option is only used for
1187# generating bitmaps for formulas in the HTML output, but not in the
1188# Makefile that is written to the output directory.
1189
1190LATEX_CMD_NAME         = latex
1191
1192# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
1193# generate index for LaTeX. If left blank `makeindex' will be used as the
1194# default command name.
1195
1196MAKEINDEX_CMD_NAME     = makeindex
1197
1198# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
1199# LaTeX documents. This may be useful for small projects and may help to
1200# save some trees in general.
1201
1202COMPACT_LATEX          = NO
1203
1204# The PAPER_TYPE tag can be used to set the paper type that is used
1205# by the printer. Possible values are: a4, letter, legal and
1206# executive. If left blank a4wide will be used.
1207
1208PAPER_TYPE             = a4
1209
1210# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
1211# packages that should be included in the LaTeX output.
1212
1213EXTRA_PACKAGES         =
1214
1215# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
1216# the generated latex document. The header should contain everything until
1217# the first chapter. If it is left blank doxygen will generate a
1218# standard header. Notice: only use this tag if you know what you are doing!
1219
1220LATEX_HEADER           =
1221
1222# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for
1223# the generated latex document. The footer should contain everything after
1224# the last chapter. If it is left blank doxygen will generate a
1225# standard footer. Notice: only use this tag if you know what you are doing!
1226
1227LATEX_FOOTER           =
1228
1229# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
1230# is prepared for conversion to pdf (using ps2pdf). The pdf file will
1231# contain links (just like the HTML output) instead of page references
1232# This makes the output suitable for online browsing using a pdf viewer.
1233
1234PDF_HYPERLINKS         = YES
1235
1236# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
1237# plain latex in the generated Makefile. Set this option to YES to get a
1238# higher quality PDF documentation.
1239
1240USE_PDFLATEX           = YES
1241
1242# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
1243# command to the generated LaTeX files. This will instruct LaTeX to keep
1244# running if errors occur, instead of asking the user for help.
1245# This option is also used when generating formulas in HTML.
1246
1247LATEX_BATCHMODE        = NO
1248
1249# If LATEX_HIDE_INDICES is set to YES then doxygen will not
1250# include the index chapters (such as File Index, Compound Index, etc.)
1251# in the output.
1252
1253LATEX_HIDE_INDICES     = NO
1254
1255# If LATEX_SOURCE_CODE is set to YES then doxygen will include
1256# source code with syntax highlighting in the LaTeX output.
1257# Note that which sources are shown also depends on other settings
1258# such as SOURCE_BROWSER.
1259
1260LATEX_SOURCE_CODE      = NO
1261
1262#---------------------------------------------------------------------------
1263# configuration options related to the RTF output
1264#---------------------------------------------------------------------------
1265
1266# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
1267# The RTF output is optimized for Word 97 and may not look very pretty with
1268# other RTF readers or editors.
1269
1270GENERATE_RTF           = NO
1271
1272# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
1273# If a relative path is entered the value of OUTPUT_DIRECTORY will be
1274# put in front of it. If left blank `rtf' will be used as the default path.
1275
1276RTF_OUTPUT             = rtf
1277
1278# If the COMPACT_RTF tag is set to YES Doxygen generates more compact
1279# RTF documents. This may be useful for small projects and may help to
1280# save some trees in general.
1281
1282COMPACT_RTF            = NO
1283
1284# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
1285# will contain hyperlink fields. The RTF file will
1286# contain links (just like the HTML output) instead of page references.
1287# This makes the output suitable for online browsing using WORD or other
1288# programs which support those fields.
1289# Note: wordpad (write) and others do not support links.
1290
1291RTF_HYPERLINKS         = NO
1292
1293# Load stylesheet definitions from file. Syntax is similar to doxygen's
1294# config file, i.e. a series of assignments. You only have to provide
1295# replacements, missing definitions are set to their default value.
1296
1297RTF_STYLESHEET_FILE    =
1298
1299# Set optional variables used in the generation of an rtf document.
1300# Syntax is similar to doxygen's config file.
1301
1302RTF_EXTENSIONS_FILE    =
1303
1304#---------------------------------------------------------------------------
1305# configuration options related to the man page output
1306#---------------------------------------------------------------------------
1307
1308# If the GENERATE_MAN tag is set to YES (the default) Doxygen will
1309# generate man pages
1310
1311GENERATE_MAN           = NO
1312
1313# The MAN_OUTPUT tag is used to specify where the man pages will be put.
1314# If a relative path is entered the value of OUTPUT_DIRECTORY will be
1315# put in front of it. If left blank `man' will be used as the default path.
1316
1317MAN_OUTPUT             = man
1318
1319# The MAN_EXTENSION tag determines the extension that is added to
1320# the generated man pages (default is the subroutine's section .3)
1321
1322MAN_EXTENSION          = .3
1323
1324# If the MAN_LINKS tag is set to YES and Doxygen generates man output,
1325# then it will generate one additional man file for each entity
1326# documented in the real man page(s). These additional files
1327# only source the real man page, but without them the man command
1328# would be unable to find the correct page. The default is NO.
1329
1330MAN_LINKS              = NO
1331
1332#---------------------------------------------------------------------------
1333# configuration options related to the XML output
1334#---------------------------------------------------------------------------
1335
1336# If the GENERATE_XML tag is set to YES Doxygen will
1337# generate an XML file that captures the structure of
1338# the code including all documentation.
1339
1340GENERATE_XML           = NO
1341
1342# The XML_OUTPUT tag is used to specify where the XML pages will be put.
1343# If a relative path is entered the value of OUTPUT_DIRECTORY will be
1344# put in front of it. If left blank `xml' will be used as the default path.
1345
1346XML_OUTPUT             = xml
1347
1348# The XML_SCHEMA tag can be used to specify an XML schema,
1349# which can be used by a validating XML parser to check the
1350# syntax of the XML files.
1351
1352XML_SCHEMA             =
1353
1354# The XML_DTD tag can be used to specify an XML DTD,
1355# which can be used by a validating XML parser to check the
1356# syntax of the XML files.
1357
1358XML_DTD                =
1359
1360# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
1361# dump the program listings (including syntax highlighting
1362# and cross-referencing information) to the XML output. Note that
1363# enabling this will significantly increase the size of the XML output.
1364
1365XML_PROGRAMLISTING     = YES
1366
1367#---------------------------------------------------------------------------
1368# configuration options for the AutoGen Definitions output
1369#---------------------------------------------------------------------------
1370
1371# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
1372# generate an AutoGen Definitions (see autogen.sf.net) file
1373# that captures the structure of the code including all
1374# documentation. Note that this feature is still experimental
1375# and incomplete at the moment.
1376
1377GENERATE_AUTOGEN_DEF   = NO
1378
1379#---------------------------------------------------------------------------
1380# configuration options related to the Perl module output
1381#---------------------------------------------------------------------------
1382
1383# If the GENERATE_PERLMOD tag is set to YES Doxygen will
1384# generate a Perl module file that captures the structure of
1385# the code including all documentation. Note that this
1386# feature is still experimental and incomplete at the
1387# moment.
1388
1389GENERATE_PERLMOD       = NO
1390
1391# If the PERLMOD_LATEX tag is set to YES Doxygen will generate
1392# the necessary Makefile rules, Perl scripts and LaTeX code to be able
1393# to generate PDF and DVI output from the Perl module output.
1394
1395PERLMOD_LATEX          = NO
1396
1397# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
1398# nicely formatted so it can be parsed by a human reader.  This is useful
1399# if you want to understand what is going on.  On the other hand, if this
1400# tag is set to NO the size of the Perl module output will be much smaller
1401# and Perl will parse it just the same.
1402
1403PERLMOD_PRETTY         = YES
1404
1405# The names of the make variables in the generated doxyrules.make file
1406# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
1407# This is useful so different doxyrules.make files included by the same
1408# Makefile don't overwrite each other's variables.
1409
1410PERLMOD_MAKEVAR_PREFIX =
1411
1412#---------------------------------------------------------------------------
1413# Configuration options related to the preprocessor
1414#---------------------------------------------------------------------------
1415
1416# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
1417# evaluate all C-preprocessor directives found in the sources and include
1418# files.
1419
1420ENABLE_PREPROCESSING   = YES
1421
1422# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
1423# names in the source code. If set to NO (the default) only conditional
1424# compilation will be performed. Macro expansion can be done in a controlled
1425# way by setting EXPAND_ONLY_PREDEF to YES.
1426
1427MACRO_EXPANSION        = YES
1428
1429# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
1430# then the macro expansion is limited to the macros specified with the
1431# PREDEFINED and EXPAND_AS_DEFINED tags.
1432
1433EXPAND_ONLY_PREDEF     = NO
1434
1435# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
1436# pointed to by INCLUDE_PATH will be searched when a #include is found.
1437
1438SEARCH_INCLUDES        = YES
1439
1440# The INCLUDE_PATH tag can be used to specify one or more directories that
1441# contain include files that are not input files but should be processed by
1442# the preprocessor.
1443
1444INCLUDE_PATH           =
1445
1446# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
1447# patterns (like *.h and *.hpp) to filter out the header-files in the
1448# directories. If left blank, the patterns specified with FILE_PATTERNS will
1449# be used.
1450
1451INCLUDE_FILE_PATTERNS  =
1452
1453# The PREDEFINED tag can be used to specify one or more macro names that
1454# are defined before the preprocessor is started (similar to the -D option of
1455# gcc). The argument of the tag is a list of macros of the form: name
1456# or name=definition (no spaces). If the definition and the = are
1457# omitted =1 is assumed. To prevent a macro definition from being
1458# undefined via #undef or recursively expanded use the := operator
1459# instead of the = operator.
1460
1461PREDEFINED             =
1462
1463# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
1464# this tag can be used to specify a list of macro names that should be expanded.
1465# The macro definition that is found in the sources will be used.
1466# Use the PREDEFINED tag if you want to use a different macro definition that
1467# overrules the definition found in the source code.
1468
1469EXPAND_AS_DEFINED      =
1470
1471# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
1472# doxygen's preprocessor will remove all references to function-like macros
1473# that are alone on a line, have an all uppercase name, and do not end with a
1474# semicolon, because these will confuse the parser if not removed.
1475
1476SKIP_FUNCTION_MACROS   = YES
1477
1478#---------------------------------------------------------------------------
1479# Configuration::additions related to external references
1480#---------------------------------------------------------------------------
1481
1482# The TAGFILES option can be used to specify one or more tagfiles.
1483# Optionally an initial location of the external documentation
1484# can be added for each tagfile. The format of a tag file without
1485# this location is as follows:
1486#   TAGFILES = file1 file2 ...
1487# Adding location for the tag files is done as follows:
1488#   TAGFILES = file1=loc1 "file2 = loc2" ...
1489# where "loc1" and "loc2" can be relative or absolute paths or
1490# URLs. If a location is present for each tag, the installdox tool
1491# does not have to be run to correct the links.
1492# Note that each tag file must have a unique name
1493# (where the name does NOT include the path)
1494# If a tag file is not located in the directory in which doxygen
1495# is run, you must also specify the path to the tagfile here.
1496
1497TAGFILES               =
1498
1499# When a file name is specified after GENERATE_TAGFILE, doxygen will create
1500# a tag file that is based on the input files it reads.
1501
1502GENERATE_TAGFILE       =
1503
1504# If the ALLEXTERNALS tag is set to YES all external classes will be listed
1505# in the class index. If set to NO only the inherited external classes
1506# will be listed.
1507
1508ALLEXTERNALS           = NO
1509
1510# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
1511# in the modules index. If set to NO, only the current project's groups will
1512# be listed.
1513
1514EXTERNAL_GROUPS        = YES
1515
1516# The PERL_PATH should be the absolute path and name of the perl script
1517# interpreter (i.e. the result of `which perl').
1518
1519PERL_PATH              = /usr/bin/perl
1520
1521#---------------------------------------------------------------------------
1522# Configuration options related to the dot tool
1523#---------------------------------------------------------------------------
1524
1525# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
1526# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
1527# or super classes. Setting the tag to NO turns the diagrams off. Note that
1528# this option also works with HAVE_DOT disabled, but it is recommended to
1529# install and use dot, since it yields more powerful graphs.
1530
1531CLASS_DIAGRAMS         = YES
1532
1533# You can define message sequence charts within doxygen comments using the \msc
1534# command. Doxygen will then run the mscgen tool (see
1535# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the
1536# documentation. The MSCGEN_PATH tag allows you to specify the directory where
1537# the mscgen tool resides. If left empty the tool is assumed to be found in the
1538# default search path.
1539
1540MSCGEN_PATH            =
1541
1542# If set to YES, the inheritance and collaboration graphs will hide
1543# inheritance and usage relations if the target is undocumented
1544# or is not a class.
1545
1546HIDE_UNDOC_RELATIONS   = YES
1547
1548# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
1549# available from the path. This tool is part of Graphviz, a graph visualization
1550# toolkit from AT&T and Lucent Bell Labs. The other options in this section
1551# have no effect if this option is set to NO (the default)
1552
1553HAVE_DOT               = YES
1554
1555# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is
1556# allowed to run in parallel. When set to 0 (the default) doxygen will
1557# base this on the number of processors available in the system. You can set it
1558# explicitly to a value larger than 0 to get control over the balance
1559# between CPU load and processing speed.
1560
1561DOT_NUM_THREADS        = 0
1562
1563# By default doxygen will write a font called Helvetica to the output
1564# directory and reference it in all dot files that doxygen generates.
1565# When you want a differently looking font you can specify the font name
1566# using DOT_FONTNAME. You need to make sure dot is able to find the font,
1567# which can be done by putting it in a standard location or by setting the
1568# DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory
1569# containing the font.
1570
1571DOT_FONTNAME           = Helvetica
1572
1573# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.
1574# The default size is 10pt.
1575
1576DOT_FONTSIZE           = 10
1577
1578# By default doxygen will tell dot to use the output directory to look for the
1579# FreeSans.ttf font (which doxygen will put there itself). If you specify a
1580# different font using DOT_FONTNAME you can set the path where dot
1581# can find it using this tag.
1582
1583DOT_FONTPATH           =
1584
1585# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
1586# will generate a graph for each documented class showing the direct and
1587# indirect inheritance relations. Setting this tag to YES will force the
1588# the CLASS_DIAGRAMS tag to NO.
1589
1590CLASS_GRAPH            = YES
1591
1592# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
1593# will generate a graph for each documented class showing the direct and
1594# indirect implementation dependencies (inheritance, containment, and
1595# class references variables) of the class with other documented classes.
1596
1597COLLABORATION_GRAPH    = YES
1598
1599# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
1600# will generate a graph for groups, showing the direct groups dependencies
1601
1602GROUP_GRAPHS           = YES
1603
1604# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
1605# collaboration diagrams in a style similar to the OMG's Unified Modeling
1606# Language.
1607
1608UML_LOOK               = YES
1609
1610# If set to YES, the inheritance and collaboration graphs will show the
1611# relations between templates and their instances.
1612
1613TEMPLATE_RELATIONS     = YES
1614
1615# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
1616# tags are set to YES then doxygen will generate a graph for each documented
1617# file showing the direct and indirect include dependencies of the file with
1618# other documented files.
1619
1620INCLUDE_GRAPH          = YES
1621
1622# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
1623# HAVE_DOT tags are set to YES then doxygen will generate a graph for each
1624# documented header file showing the documented files that directly or
1625# indirectly include this file.
1626
1627INCLUDED_BY_GRAPH      = YES
1628
1629# If the CALL_GRAPH and HAVE_DOT options are set to YES then
1630# doxygen will generate a call dependency graph for every global function
1631# or class method. Note that enabling this option will significantly increase
1632# the time of a run. So in most cases it will be better to enable call graphs
1633# for selected functions only using the \callgraph command.
1634
1635CALL_GRAPH             = YES
1636
1637# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then
1638# doxygen will generate a caller dependency graph for every global function
1639# or class method. Note that enabling this option will significantly increase
1640# the time of a run. So in most cases it will be better to enable caller
1641# graphs for selected functions only using the \callergraph command.
1642
1643CALLER_GRAPH           = YES
1644
1645# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
1646# will generate a graphical hierarchy of all classes instead of a textual one.
1647
1648GRAPHICAL_HIERARCHY    = YES
1649
1650# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
1651# then doxygen will show the dependencies a directory has on other directories
1652# in a graphical way. The dependency relations are determined by the #include
1653# relations between the files in the directories.
1654
1655DIRECTORY_GRAPH        = YES
1656
1657# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
1658# generated by dot. Possible values are svg, png, jpg, or gif.
1659# If left blank png will be used.
1660
1661DOT_IMAGE_FORMAT       = png
1662
1663# The tag DOT_PATH can be used to specify the path where the dot tool can be
1664# found. If left blank, it is assumed the dot tool can be found in the path.
1665
1666DOT_PATH               =
1667
1668# The DOTFILE_DIRS tag can be used to specify one or more directories that
1669# contain dot files that are included in the documentation (see the
1670# \dotfile command).
1671
1672DOTFILE_DIRS           =
1673
1674# The MSCFILE_DIRS tag can be used to specify one or more directories that
1675# contain msc files that are included in the documentation (see the
1676# \mscfile command).
1677
1678MSCFILE_DIRS           =
1679
1680# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
1681# nodes that will be shown in the graph. If the number of nodes in a graph
1682# becomes larger than this value, doxygen will truncate the graph, which is
1683# visualized by representing a node as a red box. Note that doxygen if the
1684# number of direct children of the root node in a graph is already larger than
1685# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note
1686# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
1687
1688DOT_GRAPH_MAX_NODES    = 50
1689
1690# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
1691# graphs generated by dot. A depth value of 3 means that only nodes reachable
1692# from the root by following a path via at most 3 edges will be shown. Nodes
1693# that lay further from the root node will be omitted. Note that setting this
1694# option to 1 or 2 may greatly reduce the computation time needed for large
1695# code bases. Also note that the size of a graph can be further restricted by
1696# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
1697
1698MAX_DOT_GRAPH_DEPTH    = 0
1699
1700# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
1701# background. This is disabled by default, because dot on Windows does not
1702# seem to support this out of the box. Warning: Depending on the platform used,
1703# enabling this option may lead to badly anti-aliased labels on the edges of
1704# a graph (i.e. they become hard to read).
1705
1706DOT_TRANSPARENT        = NO
1707
1708# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
1709# files in one run (i.e. multiple -o and -T options on the command line). This
1710# makes dot run faster, but since only newer versions of dot (>1.8.10)
1711# support this, this feature is disabled by default.
1712
1713DOT_MULTI_TARGETS      = NO
1714
1715# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
1716# generate a legend page explaining the meaning of the various boxes and
1717# arrows in the dot generated graphs.
1718
1719GENERATE_LEGEND        = YES
1720
1721# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
1722# remove the intermediate dot files that are used to generate
1723# the various graphs.
1724
1725DOT_CLEANUP            = YES
Note: See TracBrowser for help on using the repository browser.