#!/bin/ksh 

#**************************************************************
# Author: Sebastien Denvil, Martial Mancip, Christian Laguerre
# Contact: Martial.Mancip__at__ipsl.jussieu.fr
# $Revision::                                          $ Revision of last commit
# $Author::                                            $ Author of last commit
# $Date::                                              $ Date of last commit
# IPSL (2006)
#  This software is governed by the CeCILL licence see libIGCM/libIGCM_CeCILL.LIC
# 
#**************************************************************

#=========================================================
# The documentation of this file can be automatically generated
# if you use the prefix #D- for comments to be extracted. 
# Extract with command: cat lib* | grep "^#D-" | cut -c "4-"
#=========================================================

#D-#==================================================
#D-LibIGCM_sys for obelix
#D-#==================================================
#D-
#D- This ksh library if a layer under some usefull 
#D-environment variables and shell commands.
#D-All those definitions depend on host particularities.
#D-It manages a stack mechanism and test validity of operations.
#D-All function described bellow must be prefixed by IGCM_sys.

#====================================================
# libIGCM_sys PARAMETERS
#====================================================

#====================================================
# set DEBUG_sys to true to output calls of function
typeset -r DEBUG_sys=${DEBUG_sys:=true}

#====================================================
# Turn in dry run mode ? (sys_Put_Rest, sys_Put_Out, sys_Get)
typeset -r DRYRUN=${DRYRUN:=0}

# YOU MUST COMPILE YOUR EXE FILES FOR DRYRUN MODE !
# -------------------------------------------------------------------------------------
# | DRYRUN=  |  Date computations, | sys_Get    |  Exe    | sys_Put_Out; sys_Put_Rest |
# |          |  Cp/Exe param files |            |  Chmod  |                           |
# |          |      Qsub           |            |         |                           |
# -------------------------------------------------------------------------------------
# |    0     |       yes           |    yes     |  yes    |      yes                  |
# -------------------------------------------------------------------------------------
# |    1     |       yes           |    yes     |  yes    |      no                   |
# -------------------------------------------------------------------------------------
# |    2     |       yes           |    yes     |  no     |      no                   |
# -------------------------------------------------------------------------------------
# |    3     |       yes           |    no      |  no     |      no                   |
# -------------------------------------------------------------------------------------

#=====================================================
# Global Variables :
#=====================================================
# Language : "fr" or "en"
typeset -r MYLANG="fr"

#=====================================================
# Host and user names 
# $hostname ou hostname
typeset  HOST=${HOST:=$( hostname )}
# $username ou whoami
typeset  LOGIN=${LOGIN:=$( whoami )}

#D-
#D-#==================================================
#D-Program used in libIGCM
#D-#==================================================

# rsync with path
typeset -r RSYNC=/usr/bin/rsync
# RSYNC_opt args to rsync
typeset -r RSYNC_opt="-va"

#====================================================
# Set environment tools (ferret, nco, cdo)
#====================================================
. /home/users/brock/.atlas_env_asterix_ksh

#====================================================
# Set lf95 environment
#====================================================
. /usr/local/install/lf6481/bash_laheyfort_setup

#====================================================
# Host specific DIRECTORIES
#====================================================

#====================================================
#- R_EXE   (==> BIN_DIR = ${MODIPSL}/bin )
typeset -r R_EXE="${MODIPSL}/bin"

#====================================================
#- SCRATCHDIR (=> ${R_DONNEES})
if [ X${PBS_O_WORKDIR} != X ] ; then
    typeset -r SCRATCHDIR=/scratch/$PBS_O_LOGNAME.$PBS_JOBID
#==${WORKDIR} 
# cf /usr/Local/Env sur obelix
else
    typeset -r SCRATCHDIR=/tmp
fi
#FOR DEBUG RUN :
#typeset -r SCRATCHDIR=/home/scratch01/${LOGIN}

#====================================================
#- SUBMIT_DIR : submission dir
if [ X${PBS_O_WORKDIR} != X ] ; then
    typeset -r SUBMIT_DIR=${SUBMIT_DIR:=${PBS_O_WORKDIR}}
else
    typeset -r SUBMIT_DIR=${SUBMIT_DIR:=${PWD}}
fi
#====================================================
#- ARCHIVE
typeset -r ARCHIVE=${ARCHIVE:=/home/scratch01/${LOGIN}}

#====================================================
#- libIGCM_POST
typeset -r libIGCM_POST=${libIGCM}

#====================================================
#- IN
typeset -r R_IN=${R_IN:=/home/orchidee01/mmancip/IGCM}

#====================================================
#- OUT
typeset -r R_OUT=${ARCHIVE}/IGCM_OUT

#====================================================
#- OUT_POST
typeset -r R_OUT_POST=${R_OUT}

#====================================================
#- RUN_DIR_PATH : Temporary working directory (=> TMP)
typeset -r RUN_DIR_PATH=${RUN_DIR_PATH:=${SCRATCHDIR}/tmp$$}

#====================================================
#- BIG_DIR : BIG_DIR to store files waiting for rebuild
typeset -r BIG_DIR=${BIG_DIR:=${SCRATCHDIR}/REBUILD}

#====================================================
#- HOST_MPIRUN_COMMAND
typeset -r HOST_MPIRUN_COMMAND=${HOST_MPIRUN_COMMAND:="time mpirun"}

#=========================================================
#- Add "time" before mpirun command
MPIRUN_COMMAND="time "${MPIRUN_COMMAND}
echo ${MPIRUN_COMMAND}

#====================================================
#- Max number of arguments passed to nco operator or demigration command
UNIX_MAX_LIMIT=360

#D-#==================================================
#D-function IGCM_sys_RshMaster
#D-* Purpose: Just a fake command to wrapp
#D-           IGCM_card call in post-treatment
#D-           Ulam do not see brodie filesystem
#D-           Cesium do not see all mercure filesystem
#D-           That's why we need this hack.
#D-* Examples:
#D-
function IGCM_sys_RshMaster {
    IGCM_debug_PushStack "IGCM_sys_RshMaster" $@

    ssh ${HOST} exec /bin/ksh  <<-EOF
    export libIGCM=${libIGCM}
    export DEBUG_debug=${DEBUG_debug}
    . ${libIGCM}/libIGCM_debug/libIGCM_debug.ksh
    . ${libIGCM}/libIGCM_card/libIGCM_card.ksh
    ${@}
EOF
    if [ $? -gt 0 ] ; then
	echo "IGCM_sys_RshMaster : erreur."
	IGCM_debug_Exit "IGCM_sys_RshMaster"
    fi
    IGCM_debug_PopStack "IGCM_sys_RshMaster"
}

#D-#==================================================
#D-function IGCM_sys_RshArchive
#D-* Purpose: Archive rsh command
#D-* Examples:
#D-
function IGCM_sys_RshArchive {
    IGCM_debug_PushStack "IGCM_sys_RshArchive" $@
    /bin/ksh <<-EOF
    ${@}
EOF
    if [ $? -gt 0 ] ; then
	echo "IGCM_sys_RshArchive : erreur."
	IGCM_debug_Exit "IGCM_sys_RshArchive"
    fi
    IGCM_debug_PopStack "IGCM_sys_RshArchive"
}

#D-#==================================================
#D-function IGCM_sys_RshPost
#D-* Purpose: Post-process rsh command
#D-* Examples:
#D-
(( RshPNum = 0 ))
function IGCM_sys_RshPost {
    IGCM_debug_PushStack "IGCM_sys_RshPost" $@
    if ( $DEBUG_sys ) ; then
	echo "IGCM_sys_RshPost :" $@
    fi
    ssh obelix3 exec /bin/ksh $@ > out_RshPost.${RshPNum}
    if [ $? -gt 0 ] ; then
	echo "IGCM_sys_RshPost : erreur."
	IGCM_debug_Exit "IGCM_sys_RshPost"
    fi
    (( RshPNum = RshPNum + 1 ))
    IGCM_debug_PopStack "IGCM_sys_RshPost"
}

#D-#==================================================
#D-function IGCM_sys_SendMail
#D-* Purpose: Send mail when simulation is over
#D-* Examples:
#D-
function IGCM_sys_SendMail {
    IGCM_debug_PushStack "IGCM_sys_SendMail" $@
    if ( $DEBUG_sys ) ; then
	echo "IGCM_sys_SendMail :" $@
    fi

    if ( ${ExitFlag} ) ; then
	status=failed
    else
	status=completed
    fi
    cat  << END_MAIL > job_end.mail
Dear ${LOGIN},

  Simulation ${config_UserChoices_JobName} ${status} on supercomputer `hostname`.
  Job started : ${PeriodDateBegin}
  Job ended   : ${PeriodDateEnd}
  Output files are available in ${R_SAVE}
  Script files, Script Outputs and Debug files (if necessary) are available in ${SUBMIT_DIR}
END_MAIL

    if [ ! -z ${config_UserChoices_MailName} ] ; then
	mailx -s "${config_UserChoices_JobName} ${status}" ${config_UserChoices_MailName} <  job_end.mail
    elif [ -f ~/.forward ] ; then
	mailx -s "${config_UserChoices_JobName} ${status}" $( cat ~/.forward ) < job_end.mail
    fi

    if [ $? -gt 0 ] ; then
	echo "IGCM_sys_SendMail : erreur."
	IGCM_debug_Exit "IGCM_sys_SendMail"
    fi
    IGCM_debug_PopStack "IGCM_sys_SendMail"
}

#D-#==================================================
#D-function IGCM_sys_Mkdir
#D-* Purpose: Master locale mkdir command
#D-* Examples:
#D-
function IGCM_sys_Mkdir {
    IGCM_debug_PushStack "IGCM_sys_Mkdir" $@
    if ( $DEBUG_sys ) ; then
	echo "IGCM_sys_Mkdir :" $@
    fi
    if [ ! -d ${1} ]; then
	\mkdir -p $1
	if [ $? -gt 0 ] ; then
	    echo "IGCM_sys_Mkdir : erreur."
	    IGCM_debug_Exit "IGCM_sys_Mkdir"
	fi
    fi
    # vérification :
    if [ ! -d ${1} ] ; then
	echo "IGCM_sys_Mkdir : erreur."
	IGCM_debug_Exit "IGCM_sys_Mkdir"
    fi
    IGCM_debug_PopStack "IGCM_sys_Mkdir"
}

#D-#==================================================
#D-function IGCM_sys_MkdirArchive
#D-* Purpose: Mkdir on Archive
#D-* Examples:
#D-
function IGCM_sys_MkdirArchive {
    IGCM_debug_PushStack "IGCM_sys_MkdirArchive" $@
    if ( $DEBUG_sys ) ; then
	echo "IGCM_sys_MkdirArchive :" $@
    fi
    #- creation de repertoire sur le serveur fichier
    if [ ! -d ${1} ]; then 
	\mkdir -p $1
	if [ $? -gt 0 ] ; then
	    echo "IGCM_sys_MkdirArchive : erreur."
	    IGCM_debug_Exit "IGCM_sys_MkdirArchive"
	fi
    fi
    IGCM_debug_PopStack "IGCM_sys_MkdirArchive"
}

#D-#==================================================
#D-function IGCM_sys_MkdirWork
#D-* Purpose: Mkdir on Work
#D-* Examples:
#D-
function IGCM_sys_MkdirWork {
    IGCM_debug_PushStack "IGCM_sys_MkdirWork" $@
    if ( $DEBUG_sys ) ; then
	echo "IGCM_sys_MkdirWork :" $@
    fi
    #- creation de repertoire sur le serveur fichier
    if [ ! -d ${1} ]; then 
	\mkdir -p $1
	if [ $? -gt 0 ] ; then
	    echo "IGCM_sys_MkdirWork : erreur."
	    IGCM_debug_Exit "IGCM_sys_MkdirWork"
	fi
    fi
    IGCM_debug_PopStack "IGCM_sys_MkdirWork"
}

#D-#==================================================
#D-function IGCM_sys_Cd
#D-* Purpose: master cd command
#D-* Examples:
#D-
function IGCM_sys_Cd {
    IGCM_debug_PushStack "IGCM_sys_Cd" $@
    if ( $DEBUG_sys ) ; then
	echo "IGCM_sys_Cd :" $@
    fi
    \cd $1
    if [ $? -gt 0 ] ; then
	echo "IGCM_sys_Cd : erreur."
	IGCM_debug_Exit "IGCM_sys_Cd"
    fi
    IGCM_debug_PopStack "IGCM_sys_Cd"
}

#D-#==================================================
#D-function IGCM_sys_Chmod
#D-* Purpose: Chmod
#D-* Examples:
#D-
function IGCM_sys_Chmod {
    IGCM_debug_PushStack "IGCM_sys_Chmod" -- $@
    if ( $DEBUG_sys ) ; then
	echo "IGCM_sys_Chmod :" $@
    fi
    if [ $DRYRUN -le 1 ]; then
	\chmod $@
	if [ $? -gt 0 ] ; then
	    echo "IGCM_sys_Chmod : erreur."
	    IGCM_debug_Exit "IGCM_sys_Chmod"
	fi
    else
	( ${DEBUG_debug} ) && echo "DRYRUN mode = " $DRYRUN >> stack
    fi
    IGCM_debug_PopStack "IGCM_sys_Chmod"
}

#D-#==================================================
#D-function IGCM_sys_FileSize
#D-* Purpose: Filesize
#D-* Examples:
#D-
function IGCM_sys_FileSize {
    IGCM_debug_PushStack "IGCM_sys_FileSize" $@

    typeset sizeF
    set +A sizeF -- $( ls -la ${1} )
    if [ $? -gt 0 ] ; then
	IGCM_debug_Exit "IGCM_sys_FileSize"
    fi
    eval ${2}=${sizeF[4]}

    IGCM_debug_PopStack "IGCM_sys_FileSize"
}

#D-#==================================================
#D-function IGCM_sys_TestDir
#D-* Purpose: Test Directory that must exists
#D-* Examples:
#D-
function IGCM_sys_TestDir {
    IGCM_debug_PushStack "IGCM_sys_TestDir" $@
    if ( $DEBUG_sys ) ; then
	echo "IGCM_sys_TestDir :" $@
    fi
    typeset ExistFlag
    ExistFlag=$( [ -d $1 ] && echo 0 || echo 1 )
    IGCM_debug_PopStack "IGCM_sys_TestDir"

    return ${ExistFlag}
}

#D-#==================================================
#D-function IGCM_sys_TestDirArchive
#D-* Purpose: Test Directory that must exists on Archive
#D-* Examples:
#D-
function IGCM_sys_TestDirArchive {
    IGCM_debug_PushStack "IGCM_sys_TestDirArchive" $@
    if ( $DEBUG_sys ) ; then
	echo "IGCM_sys_TestDirArchive :" $@
    fi
    typeset ExistFlag
    ExistFlag=$( [ -d $1 ] && echo 0 || echo 1 )
    IGCM_debug_PopStack "IGCM_sys_TestDirArchive"

    return ${ExistFlag}
}

#D-#==================================================
#D-function IGCM_sys_TestFileArchive
#D-* Purpose: Test file that must NOT EXISTS on Archive
#D-* Examples:
#D-
function IGCM_sys_TestFileArchive {
    IGCM_debug_PushStack "IGCM_sys_TestFileArchive" $@
    if ( $DEBUG_sys ) ; then
	echo "IGCM_sys_TestFileArchive :" $@
    fi
    typeset ExistFlag
    ExistFlag=$( [ -f $1 ] && echo 0 || echo 1 )
    IGCM_debug_PopStack "IGCM_sys_TestFileArchive"

    return ${ExistFlag}
}

#D-#==================================================
#D-function IGCM_sys_CountFileArchive
#D-* Purpose: Count files on Archive filesystem
#D-* Examples:
#D-
function IGCM_sys_CountFileArchive {
    IGCM_debug_PushStack "IGCM_sys_CountFileArchive" $@
    ls ${@} 2>/dev/null | wc -l
    if [ $? -gt 0 ] ; then
	echo "IGCM_sys_CountFileArchive : erreur."
    fi
    IGCM_debug_PopStack "IGCM_sys_CountFileArchive"
}

#D-#==================================================
#D-function IGCM_sys_Tree
#D-* Purpose: Tree directories with files on ${ARCHIVE}
#D-* Examples: IGCM_sys_Tree ${R_IN} ${R_OUT}
#D-
function IGCM_sys_Tree {
    IGCM_debug_PushStack "IGCM_sys_Tree" $@
    if ( $DEBUG_sys ) ; then
	echo "IGCM_sys_Tree :" $@
    fi

    \tree -f $@

    IGCM_debug_PopStack "IGCM_sys_Tree"
}

#D-#==================================================
#D-function IGCM_sys_Tar
#D-* Purpose: master un-tar command
#D-* Examples:
#D-
function IGCM_sys_Tar {
    IGCM_debug_PushStack "IGCM_sys_Tar" $@
    if ( $DEBUG_sys ) ; then
	echo "IGCM_sys_Tar :" $@
    fi
    \tar cvf $@
    if [ $? -gt 0 ] ; then
	echo "IGCM_sys_Tar : erreur."
	IGCM_debug_Exit "IGCM_sys_Tar"
    fi
    \tar tvf $1

    IGCM_debug_PopStack "IGCM_sys_Tar"
}

#D-#==================================================
#D-function IGCM_sys_UnTar
#D-* Purpose: master un-tar command
#D-* Examples:
#D-
function IGCM_sys_UnTar {
    IGCM_debug_PushStack "IGCM_sys_UnTar" $@
    if ( $DEBUG_sys ) ; then
	echo "IGCM_sys_UnTar :" $@
    fi
    \tar xvf $1
    if [ $? -gt 0 ] ; then
	echo "IGCM_sys_UnTar : erreur."
	IGCM_debug_Exit "IGCM_sys_UnTar"
    fi
    IGCM_debug_PopStack "IGCM_sys_UnTar"
}

#D-#==================================================
#D-function IGCM_sys_Qsub
#D-* Purpose: Qsub new job
#D-* Examples:
#D-
function IGCM_sys_Qsub {
    IGCM_debug_PushStack "IGCM_sys_Qsub" $@
    if ( $DEBUG_sys ) ; then
	echo "IGCM_sys_Qsub :" $@
    fi
#    /usr/local/bin/qsub -q short -o ${Script_Output} -N ${config_UserChoices_JobName}.${CumulPeriod} < $1
    /usr/local/bin/qsub -q medium -o ${Script_Output} -N ${config_UserChoices_JobName}.${CumulPeriod} < $1
    if [ $? -gt 0 ] ; then
	echo "IGCM_sys_Qsub : erreur."
	IGCM_debug_Exit "IGCM_sys_Qsub"
    fi
    IGCM_debug_PopStack "IGCM_sys_Qsub"
}

#D-#==================================================
#D-function IGCM_sys_QsubPost
#D-* Purpose: Qsub new job on scalaire
#D-* Examples:
#D-
function IGCM_sys_QsubPost {
    IGCM_debug_PushStack "IGCM_sys_QsubPost" $@
    if ( $DEBUG_sys ) ; then
	echo "IGCM_sys_QsubPost :" $@
    fi
    /usr/local/bin/qsub -q medium -o ${POST_DIR}/${Script_Post_Output}.out ${libIGCM_POST}/$1.job -v ${listVarEnv}
    if [ $? -gt 0 ] ; then
	echo "IGCM_sys_QsubPost : erreur " $@
	IGCM_debug_Exit "IGCM_sys_QsubPost"
    fi
    IGCM_debug_PopStack "IGCM_sys_QsubPost"
}

#D-*************************
#D- File transfer functions 
#D-*************************
#D-

#D-#==================================================
#D-function IGCM_sys_Rsync_out
#D-* Purpose: treat return val of rsync
#D-* Examples: IGCM_sys_Rsync_out out_RET_rsync
#D-  Error values and explanations can depend on your system version.
function IGCM_sys_Rsync_out {
    RET=$1
    if [ ! $RET ] ; then
	echo "rsync error !"
    fi

    if [ $MYLANG = "fr" ]; then
	case $RET in
	    0)  return ;;
	    1)  echo "Erreur de rsync ; RERR_SYNTAX : "
		echo "Erreur de syntaxe ou d'utilisation."
		return;;
	    2)  echo "Erreur de rsync ; RERR_PROTOCOL : "
		echo "Incompatibilité de protocole."
		return;;
	    3)  echo "Erreur de rsync ; RERR_FILESELECT 3"
		echo "Erreurs  lors  de  la  sélection des fichiers d'entrée sortie et"
		echo "répertoires"
		return;;
	    4)  echo "Erreur de rsync ; RERR_UNSUPPORTED"
		echo "Action demandée non supportée : une tentative de manipulation de"
		echo "fichiers  64-bits  sur une plate-forme qui ne les supporte pas a"
		echo "été faite ; ou une option qui est supportée par le  client  mais"
		echo "pas par le serveur a été spécifiée."
		return;;
	    10) echo "Erreur de rsync ; RERR_SOCKETIO"
		echo "Erreur dans le socket d'entrée sortie"
		return;;
	    11) echo "Erreur de rsync ; RERR_FILEIO"
		echo "Erreur d'entrée sortie fichier"
		return;;
	    12) echo "Erreur de rsync ; RERR_STREAMIO"
		echo "Erreur dans flux de donnée du protocole rsync"
		return;;
	    13) echo "Erreur de rsync ; RERR_MESSAGEIO"
		echo "Erreur avec les diagnostics du programme"
		return;;
	    14) echo "Erreur de rsync ; RERR_IPC"
		echo "Erreur dans le code IPC"
		return;;
	    20) echo "Erreur de rsync ; RERR_SIGNAL"
		echo "SIGUSR1 ou SIGINT reçu"
		return;;
	    21) echo "Erreur de rsync ; RERR_WAITCHILD"
		echo "Une erreur retournée par waitpid()"
		return;;
	    22) echo "Erreur de rsync ; RERR_MALLOC"
		echo "Erreur lors de l'allocation des tampons de mémoire de coeur"
		return;;
	    23) echo ""
                echo "Erreur fichier inexistant"
		return;;
	    30) echo "Erreur de rsync ; RERR_TIMEOUT"
		echo "Temps d'attente écoulé dans l'envoi/réception de données"
		return;;
	    *)  echo "Erreur de rsync : code de retour de rsync inconnu :" $RET
		return;;
	esac
    elif [ $MYLANG = "en" ] ; then
	case $RET in
	    0)  return;;		
	    1)  echo "rsync error : Syntax or usage error "
		return;;
	    2)  echo "rsync error : Protocol incompatibility "
		return;;
	    3)  echo "rsync error : Errors selecting input/output files, dirs"
		return;;
	    4)  echo "rsync error : Requested action not supported: an attempt"
		echo "was made to manipulate 64-bit files on a platform that cannot support"
		echo "them; or an option was specified that is supported by the client and"
		echo "not by the server."
		return;;
	    5)  echo "rsync error : Error starting client-server protocol"
		return;;
	    10) echo "rsync error : Error in socket I/O "
		return;;
	    11) echo "rsync error : Error in file I/O "
		return;;
	    12) echo "rsync error : Error in rsync protocol data stream "
		return;;
	    13) echo "rsync error : Errors with program diagnostics "
		return;;
	    14) echo "rsync error : Error in IPC code "
		return;;
	    20) echo "rsync error : Received SIGUSR1 or SIGINT "
		return;;
	    21) echo "rsync error : Some error returned by waitpid() "
		return;;
	    22) echo "rsync error : Error allocating core memory buffers "
		return;;
	    23) echo "rsync error : Partial transfer due to error"
		return;;
	    24) echo "rsync error : Partial transfer due to vanished source files"
		return;;
	    30) echo "rsync error : Timeout in data send/receive "
		return;;
	    *)  echo "rsync error : return code of rsync unknown :" $RET
		return;;
	esac
    else
	echo "unknown language $MYLANG."
	return
    fi
}
    
#D-#==================================================
#D-function IGCM_sys_Cp
#D-* Purpose: generic cp
#D-* Examples:
#D-
function IGCM_sys_Cp {
    IGCM_debug_PushStack "IGCM_sys_Cp" $@
    if ( $DEBUG_sys ) ; then
	echo "IGCM_sys_Cp :" $@
    fi

    typeset RET

    echo cp --preserve=timestamps $@ > out_rsync 2>&1
    \cp --preserve=timestamps $@ >> out_rsync 2>&1
    RET=$?
    
    if [ ${RET} -gt 0 ] ; then
	echo "IGCM_sys_Cp : error."
	cat out_rsync
	IGCM_debug_Exit "IGCM_sys_Cp"
    else
	rm out_rsync
    fi
    IGCM_debug_PopStack "IGCM_sys_Cp"
}

#D-#==================================================
#D-function IGCM_sys_Rm
#D-* Purpose: generic rm
#D-* Examples:
#D-
function IGCM_sys_Rm {
    IGCM_debug_PushStack "IGCM_sys_Rm" -- $@
    if ( $DEBUG_sys ) ; then
	echo "IGCM_sys_Rm :" $@
    fi

    typeset RET

    echo rm $@ > out_rsync 2>&1
    \rm $@ >> out_rsync 2>&1
    RET=$?
    
    if [ ${RET} -gt 0 ] ; then
	echo "IGCM_sys_Rm : error."
	cat out_rsync
	IGCM_debug_Exit "IGCM_sys_Rm"
    else
	rm out_rsync
    fi
    IGCM_debug_PopStack "IGCM_sys_Rm"
}

#D-#==================================================
#D-function IGCM_sys_RmRunDir
#D-* Purpose: rm tmpdir (dummy function most of the time batch
#D-                      scheduler will do the job)
#D-* Examples:
#D-
function IGCM_sys_RmRunDir {
    IGCM_debug_PushStack "IGCM_sys_RmRunDir" -- $@
    if ( $DEBUG_sys ) ; then
	echo "IGCM_sys_RmRunDir :" $@
    fi

    typeset RET

    echo rm $@ > out_rsync 2>&1
    \rm $@ >> out_rsync 2>&1
    RET=$?

    if [ ${RET} -gt 0 ] ; then
	echo "IGCM_sys_RmRunDir : error."
	cat out_rsync
	IGCM_debug_Exit "IGCM_sys_RmRunDir"
    fi

    IGCM_debug_PopStack "IGCM_sys_RmRunDir"
}

#D-#==================================================
#D-function IGCM_sys_Mv
#D-* Purpose: generic move
#D-* Examples:
#D-
function IGCM_sys_Mv {
    IGCM_debug_PushStack "IGCM_sys_Mv" $@
    if ( $DEBUG_sys ) ; then
	echo "IGCM_sys_Mv :" $@
    fi

    if [ $DRYRUN = 0 ]; then

        typeset RET
            
        echo mv $@ > out_rsync 2>&1
        \mv $@ >> out_rsync 2>&1
        RET=$?
    
        if [ ${RET} -gt 0 ] ; then
            echo "IGCM_sys_Mv : error in mv."
            cat out_rsync
            IGCM_debug_Exit "IGCM_sys_Mv"
	else
	    rm out_rsync
        fi
    else
        ( ${DEBUG_debug} ) && echo "DRYRUN mode = " $DRYRUN >> stack
    fi

    IGCM_debug_PopStack "IGCM_sys_Mv"
}

#D-#==================================================
#D-function IGCM_sys_Put_Dir
#D-* Purpose: Copy a complete directory on $(ARCHIVE)
#D-* Examples:
#D-
function IGCM_sys_Put_Dir {
    IGCM_debug_PushStack "IGCM_sys_Put_Dir" $@
    if ( $DEBUG_sys ) ; then
	echo "IGCM_sys_Put_Dir :" $@
    fi
    if [ $DRYRUN = 0 ]; then
	if [ ! -d ${1} ] ; then
	    echo "WARNING : IGCM_sys_Put_Dir ${1} DOES NOT EXIST ."
	    IGCM_debug_PopStack "IGCM_sys_Put_Dir"
	    return
	fi

	typeset RET

	# Only if we use rsync
	#IGCM_sys_TestDirArchive $( dirname $2 )
	#
	#USUAL WAY
	\cp -R $1 $2 > out_rsync 2>&1
  	RET=$?

	if [ ${RET} -gt 0 ] ; then
	    echo "IGCM_sys_Put_Dir : error."
	    cat out_rsync
	    IGCM_debug_Exit "IGCM_sys_Put_Dir"
	else
	    rm out_rsync
	fi
    else
	( ${DEBUG_debug} ) && echo "DRYRUN mode = " $DRYRUN >> stack
    fi
    IGCM_debug_PopStack "IGCM_sys_Put_Dir"
}

#D-#==================================================
#D-function IGCM_sys_Get_Dir
#D-* Purpose: Copy a complete directory from $(ARCHIVE)
#D-* Examples:
#D-
function IGCM_sys_Get_Dir {
    IGCM_debug_PushStack "IGCM_sys_Get_Dir" $@
    if ( $DEBUG_sys ) ; then
	echo "IGCM_sys_Get_Dir :" $@
    fi
    if [ $DRYRUN = 0 ]; then
	if [ ! -d ${1} ] ; then
	    echo "WARNING : IGCM_sys_Get_Dir ${1} DOES NOT EXIST ."
	    IGCM_debug_PopStack "IGCM_sys_Get_Dir"
	    return
	fi

	typeset RET

	#USUAL WAY
	\cp -R $1 $2 > out_rsync 2>&1
  	RET=$?

	if [ ${RET} -gt 0 ] ; then
	    echo "IGCM_sys_Get_Dir : error."
	    cat out_rsync
	    IGCM_debug_Exit "IGCM_sys_Get_Dir"
	else
	    rm out_rsync
	fi
    else
	( ${DEBUG_debug} ) && echo "DRYRUN mode = " $DRYRUN >> stack
    fi
    IGCM_debug_PopStack "IGCM_sys_Get_Dir"
}

#D-#==================================================
#D-function IGCM_sys_Get_Master
#D-* Purpose: Copy a complete directory from MASTER filesystem
#D-* Examples:
#D-
function IGCM_sys_Get_Master {
    IGCM_debug_PushStack "IGCM_sys_Get_Master" $@
    if ( $DEBUG_sys ) ; then
	echo "IGCM_sys_Get_Master :" $@
    fi
    if [ $DRYRUN = 0 ]; then
	if [ ! -d ${1} ] ; then
	    echo "WARNING : IGCM_sys_Get_Master ${1} DOES NOT EXIST ."
	    IGCM_debug_PopStack "IGCM_sys_Get_Master"
	    return
	fi

	typeset RET

	#USUAL WAY
	cp -R $1 $2 > out_rsync 2>&1
  	RET=$?

	if [ ${RET} -gt 0 ] ; then
	    echo "IGCM_sys_Get_Master : error."
	    cat out_rsync
	    IGCM_debug_Exit "IGCM_sys_Get_Master"
	else
	    rm out_rsync
	fi
    else
	( ${DEBUG_debug} ) && echo "DRYRUN mode = " $DRYRUN >> stack
    fi
    IGCM_debug_PopStack "IGCM_sys_Get_Master"
}

#D-#==================================================
#D-function IGCM_sys_Put_Rest
#D-* Purpose: Put computied restarts on $(ARCHIVE).
#D-           File and target directory must exist.
#D-* Examples:
#D-
function IGCM_sys_Put_Rest {
    IGCM_debug_PushStack "IGCM_sys_Put_Rest" $@
    if ( $DEBUG_sys ) ; then
	echo "IGCM_sys_Put_Rest :" $@
    fi
    if [ $DRYRUN = 0 ]; then

	IGCM_sys_TestDirArchive $( dirname $2 )

	if [ ! -f ${1} ] ; then
	    echo "ERROR : IGCM_sys_Put_Rest ${1} DOES NOT EXIST ."
	    IGCM_debug_Exit "IGCM_sys_Put_Rest"
	fi
	if [ X${JobType} = XRUN ] ; then
	    IGCM_sys_Chmod 444 ${1}
	fi

	typeset RET

	echo ${RSYNC} ${RSYNC_opt} $1 $2 > out_rsync 2>&1
	${RSYNC} ${RSYNC_opt} $1 $2 >> out_rsync 2>&1
	RET=$?
	IGCM_sys_Rsync_out $RET

	${libIGCM}/libIGCM_sys/IGCM_analyse_rsync_out.awk out_rsync
	(( RET=RET+$? ))

	if [ ${RET} -gt 0 ] ; then
	    echo "IGCM_sys_Put_Rest : error."
	    cat out_rsync
	    IGCM_debug_Exit "IGCM_sys_Put_Rest"
	else
	    rm out_rsync
	fi
    else
	( ${DEBUG_debug} ) && echo "DRYRUN mode = " $DRYRUN >> stack
    fi
    IGCM_debug_PopStack "IGCM_sys_Put_Rest"
}

#D-#==================================================
#D-function IGCM_sys_Put_Out
#D-* Purpose: Copy a file on $(ARCHIVE) after have chmod it in readonly
#D-* Examples:
#D-
function IGCM_sys_Put_Out {
    IGCM_debug_PushStack "IGCM_sys_Put_Out" $@
    if ( $DEBUG_sys ) ; then
	echo "IGCM_sys_Put_Out :" $@
    fi
    if [ $DRYRUN = 0 ]; then
	if [ -f ${1} ] ; then
	    if [ ! -d $( dirname $2 ) ] ; then
		IGCM_sys_MkdirArchive $( dirname $2 )
	    fi
	else
	    echo "WARNING : IGCM_sys_Put_Out ${1} DOES NOT EXIST ."
	    IGCM_debug_PopStack "IGCM_sys_Put_Out"
	    return 1
	fi

	typeset RET
	#
	if [ X${JobType} = XRUN ] ; then
	    if [ X${3} = X ] ; then
		IGCM_sys_Chmod 444 ${1}
	    fi
	fi
	#

	echo ${RSYNC} ${RSYNC_opt} $1 $2 > out_rsync 2>&1
	${RSYNC} ${RSYNC_opt} $1 $2 >> out_rsync 2>&1
	RET=$?
	IGCM_sys_Rsync_out $RET

	${libIGCM}/libIGCM_sys/IGCM_analyse_rsync_out.awk out_rsync
	(( RET=RET+$? ))

	if [ ${RET} -gt 0 ] ; then
	    echo "IGCM_sys_Put_Out : error."
	    cat out_rsync
	    IGCM_debug_Exit "IGCM_sys_Put_Out"
	else
	    rm out_rsync
	fi
    else
	( ${DEBUG_debug} ) && echo "DRYRUN mode = " $DRYRUN >> stack
    fi
    IGCM_debug_PopStack "IGCM_sys_Put_Out"
    return 0
}

#D-#==================================================
#D-function IGCM_sys_Get
#D-* Purpose: Get a file from ${ARCHIVE}
#D-* Examples: IGCM_sys_Get myfile /destpath/myfile_with_PREFIX
#D-            IGCM_sys_Get /l Array_contain_myfiles /destpath/
function IGCM_sys_Get {
    IGCM_debug_PushStack "IGCM_sys_Get" $@

    typeset DEST RET dm_liste ifile target

    if ( $DEBUG_sys ) ; then
	echo "IGCM_sys_Get :" $@
    fi
    if [ $DRYRUN -le 2 ]; then
	if [ X${1} = X'/l' ] ; then
            # test if the first file is present in the old computation :
	    eval set +A dm_liste \${${2}}
	else
	    dm_liste=${1}
	fi
	eval DEST=\${${#}}

	# test if the (first) file is present in the old computation :
	IGCM_sys_TestFileArchive ${dm_liste[0]}
	RET=$?
        if [ ${RET} -gt 0 ] ; then
	    echo "IGCM_sys_Get, ERROR : regular file ${dm_liste[0]} DOES NOT EXIST ."
	    IGCM_debug_Exit "IGCM_sys_Get"
	    #return
	fi

	(( RET=0 ))
        for target in ${dm_liste[*]} ; do
	  \cp ${target} ${DEST} >> out_rsync 2>&1
          (( RET=RET+$? ))
	done

#       echo ${RSYNC} ${RSYNC_opt} $@ > out_rsync 2>&1
#       ${RSYNC} ${RSYNC_opt} $@ >> out_rsync 2>&1
# 	RET=$?
# 	IGCM_sys_Rsync_out $RET

#  	${libIGCM}/libIGCM_sys/IGCM_analyse_rsync_out.awk out_rsync
#  	(( RET=RET+$? ))

	if [ ${RET} -gt 0 ] ; then
	    echo "IGCM_sys_Get : copy error."
	    cat out_rsync
	    IGCM_debug_Exit "IGCM_sys_Get"
	else
	    rm out_rsync
	fi
    else
	( ${DEBUG_debug} ) && echo "DRYRUN mode = " $DRYRUN >> stack
    fi
    IGCM_debug_PopStack "IGCM_sys_Get"
}

#D-#==================================================
#D-function IGCM_sys_Dods_Rm
#D-* Purpose: Suppress files in /tmp/DODS for simulation of internet protocole.
#D-* Examples:
#D-
function IGCM_sys_Dods_Rm {
    if ( $DEBUG_sys ) ; then
	echo "IGCM_sys_Dods_Rm :" $@
    fi
    typeset RET
    RET=0
    if [ $DRYRUN = 0 ]; then
	if [ ! -d /dmnfs/cont003/dods/public/${LOGIN}/${R_DODS}/${1} ] ; then
	    echo "WARNING : IGCM_sys_Dods_Rm /dmnfs/cont003/dods/public/${LOGIN}/${R_DODS}/${1} DOES NOT EXIST ."
	    echo "Nothing has been done."
	    return
	fi
 	IGCM_sys_Rm -Rf /tmp/DODS/${config_UserChoices_TagName}/${config_UserChoices_JobName}/${1}
	RET=$?
        
	if [ ${RET} -gt 0 ] ; then
	    echo "IGCM_sys_Put_Dods : error."
	    cat out_dods_rm
	    IGCM_debug_Exit "IGCM_sys_Dods_Rm"
	else
	    rm out_dods_rm
	fi
    else
	( ${DEBUG_debug} ) && echo "DRYRUN mode = " $DRYRUN >> stack
    fi
    return $RET
}


#D-#==================================================
#D-function IGCM_sys_Dods_Cp
#D-* Purpose: Copy from $(ARCHIVE) files to /tmp/DODS for simulation of internet protocole.
#D-* Examples:
#D-
function IGCM_sys_Dods_Cp {
    if ( $DEBUG_sys ) ; then
	echo "IGCM_sys_Dods_Cp :" $@
    fi
    typeset RET
    RET=0
    if [ $DRYRUN = 0 ]; then
	if [ ! -d ${R_SAVE}/${1} ] ; then
	    echo "WARNING : IGCM_sys_Dods_Cp ${R_SAVE}/${1} DOES NOT EXIST ."
	    echo "Nothing has been done."
	    return
	fi
	#
 	IGCM_sys_Mkdir /tmp/DODS/${config_UserChoices_TagName}/${config_UserChoices_JobName}
 	IGCM_sys_Cp -Rp --parents ${1} /tmp/DODS/${config_UserChoices_TagName}/${config_UserChoices_JobName}
	RET=$?
        
	if [ ${RET} -gt 0 ] ; then
	    echo "IGCM_sys_Dods_Cp : error."
	    cat out_dods_cp
	    IGCM_debug_Exit "IGCM_sys_Dods_Cp"
	else
	    rm out_dods_cp
	fi
    else
	( ${DEBUG_debug} ) && echo "DRYRUN mode = " $DRYRUN >> stack
    fi
    return $RET
}

#D-#==================================================
#D-function IGCM_sys_Put_Dods
#D-* Purpose: Put $(ARCHIVE) files on /tmp/DODS for simulation of internet protocole.
#D-* Examples:
#D-
function IGCM_sys_Put_Dods {
    IGCM_debug_PushStack "IGCM_sys_Put_Dods" $@
    if ( $DEBUG_sys ) ; then
	echo "IGCM_sys_Put_Dods :" $@
    fi
    if [ $DRYRUN = 0 ]; then
	if [ ! -d ${R_SAVE}/${1} ] ; then
	    echo "WARNING : IGCM_sys_Put_Dods ${R_SAVE}/${1} DOES NOT EXIST ."
	    IGCM_debug_PopStack "IGCM_sys_Put_Dods"
	    return
	fi

	typeset RET
	#
 	cd ${R_SAVE}
	IGCM_sys_Dods_Rm ${1}
	IGCM_sys_Dods_Cp ${1}
	RET=0
        
	if [ ${RET} -gt 0 ] ; then
	    echo "IGCM_sys_Put_Dods : error."
	    IGCM_debug_Exit "IGCM_sys_Put_Dods"
	fi
    else
	( ${DEBUG_debug} ) && echo "DRYRUN mode = " $DRYRUN >> stack
    fi
    IGCM_debug_PopStack "IGCM_sys_Put_Dods"
}

############################################################## A FINIR !!

#D-#==================================================
#D-function IGCM_sys_GetDate_FichWork
#D-* Purpose: donne la date filesys d'un fichier sur le filesystem WORK
#D-* Examples:
#D-
function IGCM_sys_GetDate_FichWork {
    IGCM_debug_PushStack "IGCM_sys_FichWork" $@
    if ( $DEBUG_sys ) ; then
	echo "IGCM_sys_GetDate_FichWork :" $@
    fi
    # donne la date filesys d'un fichier sur la machine work
    IGCM_debug_PopStack "IGCM_sys_FichWork"
}

#D-#==================================================
#D-function IGCM_sys_GetDate_FichArchive
#D-* Purpose: donne la date filesys d'un fichier sur le filesystem ARCHIVE 
#D-* Examples:
#D-
function IGCM_sys_GetDate_FichArchive {
    IGCM_debug_PushStack "IGCM_sys_FichArchive" $@
    if ( $DEBUG_sys ) ; then
	echo "IGCM_sys_GetDate_FichArchive :" $@
    fi
    IGCM_debug_PopStack "IGCM_sys_FichArchive"
}

##############################################################
# REBUILD OPERATOR

function IGCM_sys_rebuild {
    IGCM_debug_PushStack "IGCM_sys_rebuild" -- $@
    if ( $DEBUG_sys ) ; then
	echo "IGCM_sys_rebuild :" $@
    fi
    /home/users/igcmg/rebuild/bin/rebuild -f -o $@
    if [ $? -gt 0 ] ; then
       echo "IGCM_sys_rebuild : erreur ${@}."
       IGCM_debug_Exit "rebuild"
    fi

    IGCM_debug_PopStack "IGCM_sys_rebuild"
}

##############################################################
# NCO OPERATOR

function IGCM_sys_ncap2 {
    IGCM_debug_PushStack "IGCM_sys_ncap2" -- $@
    if ( $DEBUG_sys ) ; then
	echo "IGCM_sys_ncap2 :" $@
    fi
    /usr/local/bin/ncap2 "$@"
    if [ $? -gt 0 ] ; then
       echo "IGCM_sys_ncap2 : erreur ${@}."
       IGCM_debug_Exit "ncap2"
    fi

    IGCM_debug_PopStack "IGCM_sys_ncap2"
}

function IGCM_sys_ncatted {
    IGCM_debug_PushStack "IGCM_sys_ncatted" -- $@
    if ( $DEBUG_sys ) ; then
	echo "IGCM_sys_ncatted :" $@
    fi
    /usr/local/bin/ncatted "$@"
    if [ $? -gt 0 ] ; then
       echo "IGCM_sys_ncatted : erreur ${@}."
       IGCM_debug_Exit "ncatted"
    fi

    IGCM_debug_PopStack "IGCM_sys_ncatted"
}

function IGCM_sys_ncbo {
    IGCM_debug_PushStack "IGCM_sys_ncbo" -- $@
    if ( $DEBUG_sys ) ; then
	echo "IGCM_sys_ncbo :" $@
    fi
    /usr/local/bin/ncbo $@
    if [ $? -gt 0 ] ; then
       echo "IGCM_sys_ncbo : erreur ${@}."
       IGCM_debug_Exit "ncbo"
    fi

    IGCM_debug_PopStack "IGCM_sys_ncbo"
}

function IGCM_sys_ncdiff {
    IGCM_debug_PushStack "IGCM_sys_ncdiff" -- $@
    if ( $DEBUG_sys ) ; then
	echo "IGCM_sys_ncdiff :" $@
    fi
    /usr/local/bin/ncdiff $@
    if [ $? -gt 0 ] ; then
       echo "IGCM_sys_ncdiff : erreur ${@}."
       IGCM_debug_Exit "ncdiff"
    fi

    IGCM_debug_PopStack "IGCM_sys_ncdiff"
}

function IGCM_sys_ncea {
    IGCM_debug_PushStack "IGCM_sys_ncea" -- $@
    if ( $DEBUG_sys ) ; then
	echo "IGCM_sys_ncea :" $@
    fi
    /usr/local/bin/ncea $@
    if [ $? -gt 0 ] ; then
       echo "IGCM_sys_ncea : erreur ${@}."
       IGCM_debug_Exit "ncea"
    fi

    IGCM_debug_PopStack "IGCM_sys_ncea"
}

function IGCM_sys_ncecat {
    IGCM_debug_PushStack "IGCM_sys_ncecat" -- $@
    if ( $DEBUG_sys ) ; then
	echo "IGCM_sys_ncecat :" $@
    fi
    /usr/local/bin/ncecat $@
    if [ $? -gt 0 ] ; then
       echo "IGCM_sys_ncecat : erreur ${@}."
       IGCM_debug_Exit "ncecat"
    fi

    IGCM_debug_PopStack "IGCM_sys_ncecat"
}

function IGCM_sys_ncflint {
    IGCM_debug_PushStack "IGCM_sys_ncflint" -- $@
    if ( $DEBUG_sys ) ; then
	echo "IGCM_sys_ncflint :" $@
    fi
    /usr/local/bin/ncflint $@
    if [ $? -gt 0 ] ; then
       echo "IGCM_sys_ncflint : erreur ${@}."
       IGCM_debug_Exit "ncflint"
    fi

    IGCM_debug_PopStack "IGCM_sys_ncflint"
}

function IGCM_sys_ncks {
    IGCM_debug_PushStack "IGCM_sys_ncks" -- $@
    if ( $DEBUG_sys ) ; then
	echo "IGCM_sys_ncks :" $@
    fi
    /usr/local/bin/ncks $@
    if [ $? -gt 0 ] ; then
       echo "IGCM_sys_ncks : erreur ${@}."
       IGCM_debug_Exit "ncks"
    fi

    IGCM_debug_PopStack "IGCM_sys_ncks"
}

function IGCM_sys_ncpdq {
    IGCM_debug_PushStack "IGCM_sys_ncpdq" -- $@
    if ( $DEBUG_sys ) ; then
	echo "IGCM_sys_ncpdq :" $@
    fi
    /usr/local/bin/ncpdq $@
    if [ $? -gt 0 ] ; then
       echo "IGCM_sys_ncpdq : erreur ${@}."
       IGCM_debug_Exit "ncpdq"
    fi

    IGCM_debug_PopStack "IGCM_sys_ncpdq"
}

function IGCM_sys_ncra {
    IGCM_debug_PushStack "IGCM_sys_ncra" -- $@
    if ( $DEBUG_sys ) ; then
	echo "IGCM_sys_ncra :" $@
    fi
    /usr/local/bin/ncra $@
    if [ $? -gt 0 ] ; then
       echo "IGCM_sys_ncra : erreur ${@}."
       IGCM_debug_Exit "ncra"
    fi

    IGCM_debug_PopStack "IGCM_sys_ncra"
}

function IGCM_sys_ncrcat {
    IGCM_debug_PushStack "IGCM_sys_ncrcat" -- $@
    if ( $DEBUG_sys ) ; then
	echo "IGCM_sys_ncrcat :" $@
    fi
    /usr/local/bin/ncrcat $@
    if [ $? -gt 0 ] ; then
       echo "IGCM_sys_ncrcat : erreur ${@}."
#       IGCM_debug_Exit "ncrcat"
    fi

    IGCM_debug_PopStack "IGCM_sys_ncrcat"
}

function IGCM_sys_ncrename {
    IGCM_debug_PushStack "IGCM_sys_ncrename" -- $@
    if ( $DEBUG_sys ) ; then
	echo "IGCM_sys_ncrename :" $@
    fi
    /usr/local/bin/ncrename $@
    if [ $? -gt 0 ] ; then
       echo "IGCM_sys_ncrename : erreur ${@}."
       IGCM_debug_Exit "ncrename"
    fi

    IGCM_debug_PopStack "IGCM_sys_ncrename"
}

function IGCM_sys_ncwa {
    IGCM_debug_PushStack "IGCM_sys_ncwa" -- $@
    if ( $DEBUG_sys ) ; then
	echo "IGCM_sys_ncwa :" $@
    fi
    /usr/local/bin/ncwa $@
    if [ $? -gt 0 ] ; then
       echo "IGCM_sys_ncwa : erreur ${@}."
       IGCM_debug_Exit "ncwa"
    fi

    IGCM_debug_PopStack "IGCM_sys_ncwa"
}

##############################################################
# CDO OPERATOR

function IGCM_sys_cdo {
    IGCM_debug_PushStack "IGCM_sys_cdo" -- $@

    \cdo $@
    if [ $? -gt 0 ] ; then
       echo "IGCM_sys_cdo : erreur ${@}."
       IGCM_debug_PopStack "IGCM_sys_cdo"
       return 1
    else
	IGCM_debug_PopStack "IGCM_sys_cdo"
	return 0
    fi

    IGCM_debug_PopStack "IGCM_sys_cdo"
}

############################################################
# Activate Running Environnment Variables

function IGCM_sys_activ_variables {
    IGCM_debug_PushStack "IGCM_sys_activ_variables"
    if ( $DEBUG_sys ) ; then
	echo "IGCM_sys_activ_variables"
    fi
    IGCM_debug_PopStack "IGCM_sys_activ_variables"
}

############################################################
# Desactivate Running Environnment Variables

function IGCM_sys_desactiv_variables {
    IGCM_debug_PushStack "IGCM_sys_desactiv_variables"
    if ( $DEBUG_sys ) ; then
	echo "IGCM_sys_desactiv_variables"
    fi
    IGCM_debug_PopStack "IGCM_sys_desactiv_variables"
}

############################################################
# Build run file

function IGCM_sys_build_run_file {
    IGCM_debug_PushStack "IGCM_sys_build_run_file" $@
    if ( $DEBUG_sys ) ; then
	echo "IGCM_sys_build_run_file"
    fi
    IGCM_debug_PopStack "IGCM_sys_build_run_file"
}