source: tags/libIGCM_v2.0/libIGCM_card/libIGCM_card.ksh @ 1170

#!/bin/ksh

#**************************************************************
# Author: Patrick Brockmann
# Contact: Patrick.Brockmann__at__cea.fr
# $Revision::                                          $ Revision of last commit
# $Author::                                            $ Author of last commit
# $Date::                                              $ Date of last commit
# IPSL (2006)
#  This software is governed by the CeCILL licence see libIGCM/libIGCM_CeCILL.LIC
#
#**************************************************************

#==================================================
# The documentation of this file can be automatically generated
# if you use the prefix #D- for comments to be extracted. 
# Extract with command: cat lib* | grep "^#D-" | cut -c "4-"
#==================================================
 
#D-#==================================================================
#D-libIGCM_card
#D-This ksh library handles extraction of information from configuration file
#D-called "card" file (en français fichier "carte").
#D-All function described bellow must be prefixed by IGCM_card.
#D-A card file is organized as follows :
#D- ---------------------
#D-[Messages]
#D-Option1= "Hello Earth"
#D-Option2= "Hello Mars"
#D-
#D-# My comments 
#D-[Recipes]
#D-Cake= "file1.doc" 
#D-Starter= "file2.doc" 
#D-
#D-[ColorValues]
#D-Red= 120
#D-Blue= 230 
#D-Green= 178 
#D-
#D-[Couples]
#D-List1=   (up, down), \
#D-         (humid, dry), \
#D-         (hot, cold), \
#D-         (far, close)
#D-List2=   (ice, fire, air, water)
#D- ---------------------
#D-

#D-#==================================================================
#D-function IGCM_card_PrintOption
#D-* Purpose: Print an option from a given file.card and section
#D-* Usage: IGCM_card_PrintOption file.card section option
#D-* Only used by IGCM_card_Test.ksh
#D-
function IGCM_card_PrintOption
{
    IGCM_debug_PushStack "IGCM_card_PrintOption" $@
    if ( [ -r "$1" ] && [ -f "$1" ] ) ; then
      gawk -f ${libIGCM}/libIGCM_card/IGCM_card_PrintOption.awk "$@"
    else
      echo
      IGCM_debug_Print 1 "--Error--> IGCM_card_PrintOption $@"
      IGCM_debug_Print 1 "           $1 is not readable"
      IGCM_debug_Exit "IGCM_card_PrintOption"
    fi
    IGCM_debug_PopStack "IGCM_card_PrintOption"
}

#D-#==================================================================
#D-function IGCM_card_PrintSection
#D-* Purpose: Print all options from a given file.card and section
#D-* Usage: IGCM_card_PrintSection file.card section
#D-* Only used by IGCM_card_Test.ksh
#D-
function IGCM_card_PrintSection
{
    IGCM_debug_PushStack "IGCM_card_PrintSection" $@
    if ( [ -r "$1" ] && [ -f "$1" ] ) ; then
      gawk -f ${libIGCM}/libIGCM_card/IGCM_card_PrintSection.awk -- "$@"
    else
      IGCM_debug_Print 1 "--Error--> IGCM_card_PrintSection $@"
      IGCM_debug_Print 1 "           $1 is not readable"
      IGCM_debug_Exit "IGCM_card_PrintSection"
    fi
    IGCM_debug_PopStack "IGCM_card_PrintSection"
}

#D-#==================================================================
#D-function IGCM_card_DefineVariableFromOption
#D-* Purpose: Define a variable from a given file.card, section and option
#D-*          Variable name is automatically defined as file_section_option
#D-* Usage: IGCM_card_DefineVariableFromOption file.card section option
#D-
function IGCM_card_DefineVariableFromOption
{
    IGCM_debug_PushStack "IGCM_card_DefineVariableFromOption" $@
    if ( [ -r "$1" ] && [ -f "$1" ] ) ; then
      # Get basename of card file ($1)
      typeset name1=${1##*/}
      # Build name of variable as $1_$2_$3 (cardname_Section_Option)
      typeset name=${name1%%.*}_${2}_${3}
      typeset value=$( gawk -f ${libIGCM}/libIGCM_card/IGCM_card_PrintOption.awk -- "$@" )

      # Only if a section is missing we exit the job.
      # We must allow missing option to keep backward compatibilty.
      if [ "${value}" = "Error: Section not found" ] ; then
        echo
        IGCM_debug_Print 1 "Error with readding of ${name} variable in ${1}."
        IGCM_debug_Print 1 "Error: Section ${2} not found"
        IGCM_debug_Exit
        IGCM_debug_Verif_Exit
      fi
      eval ${name}=${value}
    else
      echo
      IGCM_debug_Print 1 "--Error--> IGCM_card_DefineVariableFromOption"
      IGCM_debug_Print 1 "--Error--> $1 is not readable"
      IGCM_debug_Exit "IGCM_card_DefineVariableFromOption"
      IGCM_debug_Verif_Exit
    fi
    IGCM_debug_PopStack "IGCM_card_DefineVariableFromOption"
}

#D-#==================================================================
#D-function IGCM_card_DefineArrayFromOption
#D-* Purpose: Define an array variable from a given file.card, section and option
#D-*          Array variable is automatically defined as file_section_option
#D-* Usage: IGCM_card_DefineArrayFromOption file.card section option
#D-
function IGCM_card_DefineArrayFromOption
{
    IGCM_debug_PushStack "IGCM_card_DefineArrayFromOption" $@
    if ( [ -r "$1" ] && [ -f "$1" ] ) ; then
      # Get basename of card file ($1)
      typeset name1=${1##*/}
      # Build name of array as $1_$2_$3 (cardname_Section_Option)
      typeset name=${name1%%.*}_${2}_${3}
      eval unset ${name}
      eval ${name}[0]=${NULL_STR}
      set +A ${name} -- $( gawk -f ${libIGCM}/libIGCM_card/IGCM_card_PrintOption.awk -- "$@" | gawk -- 'BEGIN {FS="[() ,]+"} {for (i=2; i <= NF-1; i++) printf("%s ",$i)}' )
    else
      echo
      IGCM_debug_Print 1 "--Error--> IGCM_card_DefineArrayFromOption $@"
      IGCM_debug_Print 1 "           $1 is not readable"
      IGCM_debug_Exit "IGCM_card_DefineArrayFromOption"
    fi
    IGCM_debug_PopStack "IGCM_card_DefineArrayFromOption"
}

#D-#==================================================================
#D-function IGCM_card_DefineArrayFromSection
#D-* Purpose: Define an array variable from a given file.card and section
#D-*          Array variable is automatically defined as file_section
#D-* Usage: IGCM_card_DefineArrayFromSection file.card section
#D-
function IGCM_card_DefineArrayFromSection
{
    IGCM_debug_PushStack "IGCM_card_DefineArrayFromSection" $@
    if ( [ -r "$1" ] && [ -f "$1" ] ) ; then
      # Get basename of card file ($1)
      typeset name1=${1##*/}
      # Build name of array as $1_$2 (cardname_Section)
      typeset name=${name1%%.*}_${2}
      eval unset ${name}
      eval ${name}[0]=${NULL_STR}
      set +A ${name} -- $( gawk -f ${libIGCM}/libIGCM_card/IGCM_card_PrintSection.awk -- "$@" )
      #if [ "$( eval echo \${${name}[@]} )" = "Error: Section not found" ] ; then
      #    echo
      #    IGCM_debug_Print 1 "Error with readding of ${name} variable in ${1}."
      #    IGCM_debug_Print 1 "Error: Section ${2} not found"
      #    IGCM_debug_Exit
      #    IGCM_debug_Verif_Exit
      #fi
      if [ "$( eval echo \${${name}[@]} )" = "Error: Section not found" ] ; then
        echo
        IGCM_debug_Print 1 "Warning with readding of ${name} variable in ${1}."
        IGCM_debug_Print 1 "Warning: Section ${2} not found"
        eval unset ${name}
      fi
    else
      IGCM_debug_Print 1 "--Error--> IGCM_card_DefineArrayFromSection $@"
      IGCM_debug_Print 1 "           $1 is not readable"
      IGCM_debug_Exit "IGCM_card_DefineArrayFromSection"
    fi
    IGCM_debug_PopStack "IGCM_card_DefineArrayFromSection"
}

#D-#==================================================================
#D-function IGCM_card_WriteOption
#D-* Purpose: Write an option in a given file.card and section
#D-* Usage: IGCM_card_WriteOption file.card section newvalue
#D-* Examples: IGCM_card_WriteOption file.card Recipes Red 150
#D-            IGCM_card_WriteOption file.card Messages Option2 '"Hello Mercure"'
#D-            IGCM_card_WriteOption file.card Messages ListVal1 '( 1, 2, 3 )'
#D-            listname="(Sebastien, Martial, Patrick)"
#D-            IGCM_card_WriteOption NewTestFile.card Messages ListVal2 "${listname}"
#D-
function IGCM_card_WriteOption
{
    IGCM_debug_PushStack "IGCM_card_WriteOption" $@
    if ( [ -r "$1" ] && [ -w "$1" ]  && [ -f "$1" ] ) ; then
      typeset tmpfile=tmpfile_$$
      ( IGCM_card_PrintOption "$1" "$2" "$3" | grep "not found" ) > ${tmpfile}
      if [ $( cat ${tmpfile} | wc -l ) -gt 0 ] ; then
        echo "-------------------------------------------"
        echo "!!! Problem with IGCM_card_WriteOption !!!"
        echo "Try to write : " $@
        echo "You have to correct some script." 
        echo "We won't do anything else !"
        exit 1
      fi
      \rm ${tmpfile}

      # The tmpfile uses now the real path of the card to be modified, 
      # not just a local tmpfile with PID.
      tmpfile=$1_mutex_$$

      IGCM_card_CheckConflict $1

      # Do the job
      ( gawk -f ${libIGCM}/libIGCM_card/IGCM_card_WriteOption.awk -- "$@" 2> /dev/null ) > ${tmpfile}

      cp $1 $1.bak
      mv ${tmpfile} $1

    else
      echo
      IGCM_debug_Print 1 "--Error--> IGCM_card_WriteOption $@"
      IGCM_debug_Print 1 "           $1 is not readable or not writable"
      IGCM_debug_Exit "IGCM_card_WriteOption"
    fi
    IGCM_debug_PopStack "IGCM_card_WriteOption"
}

function IGCM_card_CheckConflict
{
    IGCM_debug_PushStack "IGCM_card_CheckConflict" $@

    typeset isleep tmpfiles

    # Watch for possible conflics : Check for other tmpfiles.
    set +A tmpfiles -- $( ls $1_mutex_[0-9]* 2>/dev/null )
    ((isleep=0))
    while [ ${#tmpfiles[@]} -gt 0 ] ; do 
      echo "Conflict between two processes working on " $1 "!!!" ${tmpfiles[@]}
      sleep 1
      ((isleep=isleep+1))
      if [ ${isleep} -gt 20 ] ; then
        echo "Too many loops waiting for other process working on " $1 ". We continue."
        echo "You should see if one process of your run or post-treatment may have terminated suddenly."
        echo "Afer, you should erase this(those) file(s) : " ${tmpfiles[@]}
# Send a mail to USER ??
        break ;
      fi
      unset tmpfiles
      set +A tmpfiles -- $( ls $1_mutex_[0-9]* 2>/dev/null )
    done

    IGCM_debug_PopStack "IGCM_card_CheckConflict"
}

#D-#==================================================================
#D-function IGCM_card_WriteArrayOption
#D-* Purpose: Write an array option a given file.card and section
#D-* Usage: IGCM_card_WriteArrayOption file.card section option newarray
#D-* Examples: set -A MyArray -- 1 2 3
#D-            IGCM_card_WriteArrayOption file.card Recipes List MyArray
#D-
function IGCM_card_WriteArrayOption
{
    IGCM_debug_PushStack "IGCM_card_WriteArrayOption" $@

    if ( [ -r "$1" ] && [ -w "$1" ]  && [ -f "$1" ] ) ; then
      typeset tmpfile=tmpfile_$$
      if [ X"${4}" != X"" ]; then
        tab=$4
        IGCM_card_WriteOption $1 $2 $3 '('$( eval echo \${${tab}[@]} | sed -e 's/ /,/g' )')'
      else
        IGCM_card_WriteOption $1 $2 $3 '()'
      fi
    else
      echo
      IGCM_debug_Print 1 "--Error--> IGCM_card_WriteArrayOption $@"
      IGCM_debug_Print 1 "           $1 is not readable or not writable"
      IGCM_debug_Exit "IGCM_card_WriteArrayOption"
    fi
    IGCM_debug_PopStack "IGCM_card_WriteArrayOption"
}

#D-#==================================================================
#D-function IGCM_card_Check
#D-* Purpose: Check the present file by comparison with a reference file
#D-* Usage: IGCM_card_Check
#D-
function IGCM_card_Check
{
    IGCM_debug_PushStack "IGCM_card_Check" 
#---------------------
    if [ ! -n "${libIGCM}" ] ; then
      echo "Check libIGCM_card ...........................................[ FAILED ]"
      echo "--Error--> libIGCM variable is not defined"
      IGCM_debug_Exit "IGCM_card_Check"
    fi

#---------------------
    whence -v gawk > /dev/null 2>&1
    if [ ! $? -eq 0 ] ; then
      echo "Check libIGCM_card ...........................................[ FAILED ]"
      echo "--Error--> gawk command is not defined"
      IGCM_debug_Exit "IGCM_card_Check"
    fi

#---------------------
    ${libIGCM}/libIGCM_card/IGCM_card_Test.ksh > IGCM_card_Test.ref.failed 2>&1
    sleep 2

    if diff IGCM_card_Test.ref.failed ${libIGCM}/libIGCM_card/IGCM_card_Test.ref > /dev/null 2>&1 ; then 
      echo "Check libIGCM_card ...............................................[ OK ]"
      rm -f IGCM_card_Test.ref.failed
    else 
      echo "Check libIGCM_card ...........................................[ FAILED ]"
      echo "--Error--> Execution of ${libIGCM}/libIGCM_card/IGCM_card_Test.ksh"
      echo "           has produced the file IGCM_card_Test.ref.failed"
      echo "           Please analyse differences with the reference file by typing:"
      echo "           diff IGCM_card_Test.ref.failed ${libIGCM}/libIGCM_card/IGCM_card_Test.ref"
      echo "           Report errors to the author: Patrick.Brockmann@cea.fr"
      IGCM_debug_Exit "IGCM_card_Check"
    fi

#---------------------
    IGCM_debug_PopStack "IGCM_card_Check" 
}