source: trunk/libIGCM/AA_job @ 1398

#-Q- curie #!/bin/ksh
#-Q- curie ######################
#-Q- curie ## CURIE   TGCC/CEA ##
#-Q- curie ######################
#-Q- curie #MSUB -r ::Jobname::        # Job Name
#-Q- curie #MSUB -o Script_Output_::Jobname::.000001    # standard output
#-Q- curie #MSUB -e Script_Output_::Jobname::.000001    # error output
#-Q- curie #MSUB -eo
#-Q- curie #MSUB -n ::JobNumProcTot::  # Number of MPI tasks (SPMD case) or cores (MPMD case)
#-Q- curie #MSUB -c ::openMPthreads::  # Number of openMP threads. To specify only for SMPD
#-Q- curie #MSUB -x                    # exclusive node. To specify only for MPMD together with the one below
#-Q- curie #MSUB -E '--cpu_bind=none'
#-Q- curie ##MSUB -E '--distribution cyclic' 
#-Q- curie #MSUB -T 86400              # Wall clock limit (seconds)
#-Q- curie #MSUB -q standard           # thin nodes
#-Q- curie #MSUB -A ::default_project::
#-Q- curie # Below specific options that can be activated 
#-Q- curie ##MSUB -q ivybridge         # Option for Airain
#-Q- curie
#-Q- curie BATCH_NUM_PROC_TOT=$BRIDGE_MSUB_NPROC
#-Q- curie set +x
#-Q- ada #!/bin/ksh
#-Q- ada # ######################
#-Q- ada # ##  ADA       IDRIS ##
#-Q- ada # ######################
#-Q- ada # Job name 
#-Q- ada # @ job_name = ::Jobname::
#-Q- ada # Standard output file name
#-Q- ada # @ output = Script_Output_::Jobname::.000001
#-Q- ada # Error output file name
#-Q- ada # @ error = Script_Output_::Jobname::.000001
#-Q- ada # Job type
#-Q- ada # @ job_type = parallel
#-Q- ada # Total number of tasks
#-Q- ada # @ total_tasks = ::JobNumProcTot::
#-Q- ada # Specific option for OpenMP parallelization: Number of OpenMP threads per MPI task
#-Q- ada # @ parallel_threads = ::openMPthreads::
#-Q- ada # Memory : as_limit=3.5gb max per process per core. With 4 threads per process use max as_limit=14gb
#-Q- ada # @ as_limit = 3.5gb
#-Q- ada # Maximum CPU time per task hh:mm:ss
#-Q- ada # @ wall_clock_limit = 1:00:00
#-Q- ada # @ environment = "BATCH_NUM_PROC_TOT=::JobNumProcTot::" ; wall_clock_limit=$(wall_clock_limit)
#-Q- ada # End of the header options
#-Q- ada # @ queue
#-Q- lxiv8 ######################
#-Q- lxiv8 ## OBELIX      LSCE ##
#-Q- lxiv8 ######################
#-Q- lxiv8 #PBS -N ::Jobname::
#-Q- lxiv8 #PBS -m a
#-Q- lxiv8 #PBS -j oe
#-Q- lxiv8 #PBS -q mediump
#-Q- lxiv8 #PBS -o Script_Output_::Jobname::.000001
#-Q- lxiv8 #PBS -S /bin/ksh
#-Q- lxiv8 #PBS -v BATCH_NUM_PROC_TOT=::JobNumProcTot::
#-Q- lxiv8 #PBS -l nodes=1:ppn=::JobNumProcTot::
#-Q- ifort_CICLAD ######################
#-Q- ifort_CICLAD ##   CICLAD    IPSL ##
#-Q- ifort_CICLAD ######################
#-Q- ifort_CICLAD #PBS -N ::Jobname::
#-Q- ifort_CICLAD #PBS -m a
#-Q- ifort_CICLAD #PBS -j oe
#-Q- ifort_CICLAD ###PBS -q h12   # Queue for 12 hours at ciclad only
#-Q- ifort_CICLAD #PBS -o Script_Output_::Jobname::.000001
#-Q- ifort_CICLAD #PBS -S /bin/ksh
#-Q- ifort_CICLAD #PBS -v BATCH_NUM_PROC_TOT=::JobNumProcTot::
#-Q- ifort_CICLAD #PBS -l nodes=1:ppn=::JobNumProcTot::
#-Q- ifort_CICLAD #PBS -l mem=6gb
#-Q- ifort_CICLAD #PBS -l vmem=30gb
#-Q- default #!/bin/ksh
#-Q- default ##################
#-Q- default ## DEFAULT HOST ##
#-Q- default ##################
#-Q- default #For MPI use, uncomment next line :
#-Q- default #BATCH_NUM_PROC_TOT=::JobNumProcTot::

#**************************************************************
# Author: Sebastien Denvil
# Contact: Sebastien.Denvil__at__ipsl.jussieu.fr
# $Revision::                                          $ Revision of last commit
# $Author::                                            $ Author of last commit
# $Date::                                              $ Date of last commit
# IPSL (2006)
#  This software is governed by the CeCILL licence see libIGCM/libIGCM_CeCILL.LIC
#
#**************************************************************

#set -eu
#set -vx

date
echo
echo "#######################################"
echo "#       ANOTHER GREAT SIMULATION      #"
echo "#######################################"
echo

#D--------------------------------------------------------------------==
#D-
#D-                      Job to launch IGCM models
#D-
#D--------------------------------------------------------------------==
#D-

MODIPSL=::modipsl::
libIGCM=${MODIPSL}/libIGCM

#D--------------------------------------------------------------------==
#D- -1. PLACE FOR USER MODIFICATION
#D-     - Job Verbosity
#D-     - PeriodNb
#D-     - Experience type : DEB(ug), DEV(elopment), RUN
#D--------------------------------------------------------------------==

#D- Task type DO NOT CHANGE (computing, post-processing or checking)
TaskType=computing

#D- Increased verbosity (1, 2, 3)
Verbosity=3

#D- postProcessingStopLevel (0,1,2,3)
#D- 3 stop the main job if any post-processing went wrong (atlas, monitoring, metrics, create_ts, create_se, rebuild or pack_*)
#D- 2 stop only if create_ts, create_se or pack_* failed  (dont stop if atlas, monitoring or metrics failed)
#D- 1 stop only if pack_* failed (dont stop if atlas, monitoring, metrics, create_ts or create_se failed)
#D- 0 never stop the main job for post-processing that went wrong
postProcessingStopLevel=1

#D- Experience type : DEB(ug), DEV(elopment), RUN (default)
#D- DEB : set -vx mode + output files are NOT read only
#D- DEV : output files are NOT read only
#D- RUN : output files ARE read only
JobType=RUN

#D- Number of execution in one job
PeriodNb=1

#D-
#D- --------------------------------------------------------------------------------------------------#
#D-                          ! OPTIONNAL FEATURES /!\ USE WITH CARE !                                 #
#D- --------------------------------------------------------------------------------------------------#


#D- Low level debug : to perform lib test checks, stack construction and IO functions instrumentation
#D- Default=true
#D-
DEBUG_debug=true

#D- Messaging : all activities and call stacks will be sent to ipsl servers
#D- If true will imply DEBUG_debug=true
#D- Default=false
#D-
BigBrother=true

#D- Set DEBUG_sys to false to disable output calls of function
#D- true when JobType=DEB # means DEB(ug)
#D-
#DEBUG_sys=false

#D- Define running directory
#D- Default=${TMPDIR} ie temporary batch directory
#D-
#RUN_DIR_PATH=/workdir/or/scratchdir/of/this/machine

#D- Define submit directory
#D- Default= where you launch qsub (variable from scheduler)
#D-
#SUBMIT_DIR=$( pwd )

#D- Define input file root directory
#D- Default=/IGCMG/common/account/of/this/machine
#D- IPSL:   /prodigfs/ipslfs/igcmg/IGCM
#D- TGCC:   /ccc/work/cont003/igcmg/igcmg/IGCM
#D- IDRIS:  /workgpfs/rech/psl/rpsl035/IGCM
#D- OBELIX: /home/orchideeshare/igcmg/IGCM
#D- OTHER:  /home/${LOGIN}/IGCM

#D- Change below to override the default
#R_IN=/u/rech/por/rpor111/DATA

#D- Turn in dry run mode ? (0,1,2,3)
#D- Default=0
#D-
#DRYRUN=3
#D-# YOU HAVE TO COMPILE YOUR EXE FILES to USE DRYRUN MODE !
#D-# -------------------------------------------------------------------------------------
#D-# | DRYRUN=  |  Date computations, | sys_Get    |  Exe    | sys_Put_Out; sys_Put_Rest |
#D-# |          |  Cp/Exe/param/files |            |         |                           |
#D-# |          |  Chmod Qsub         |            |         |                           |
#D-# -------------------------------------------------------------------------------------
#D-# |    0     |       yes           |    yes     |  yes    |      yes                  |
#D-# -------------------------------------------------------------------------------------
#D-# |    1     |       yes           |    yes     |  yes    |      no                   |
#D-# -------------------------------------------------------------------------------------
#D-# |    2     |       yes           |    yes     |  no     |      no                   |
#D-# -------------------------------------------------------------------------------------
#D-# |    3     |       yes           |    no      |  no     |      no                   |
#D-# -------------------------------------------------------------------------------------

#D-
# --------------------------------------------------------------------------------------------------#
#D- ! END OF OPTIONNAL FEATURES /!\ DO NOT MODIFY ANYTHING BELOW UNLESS YOU KNOW WHAT YOU ARE DOING #
# --------------------------------------------------------------------------------------------------#

#D-
#D--------------------------------------------------------------------==
#D- 0.0 SYSTEM ENVIRONMENT
#D-     - Define variables for Number of processors
#D-     - Define MPI variables
#D-     - Define batch scheduler variables
#D-     - Source IGCM Library
#D-     - Get RESOLution in .resol file (temporary)
#D--------------------------------------------------------------------==

#---------------------------------------------------------------------==

. ${libIGCM}/libIGCM_debug/libIGCM_debug.ksh
. ${libIGCM}/libIGCM_card/libIGCM_card.ksh
. ${libIGCM}/libIGCM_date/libIGCM_date.ksh
#-------
. ${libIGCM}/libIGCM_sys/libIGCM_sys.ksh
. ${libIGCM}/libIGCM_config/libIGCM_config.ksh
. ${libIGCM}/libIGCM_comp/libIGCM_comp.ksh
. ${libIGCM}/libIGCM_post/libIGCM_post.ksh
#-------
( ${DEBUG_debug} ) && IGCM_debug_Check
( ${DEBUG_debug} ) && IGCM_card_Check
( ${DEBUG_debug} ) && IGCM_date_Check

#--------------------------------------------------------------------==

#-- Resolution FLAG for oasis input
#RESOL="ORCA2xLMD9671"
[ -f ${SUBMIT_DIR}/../.resol ] && RESOL=$(head -1 ${SUBMIT_DIR}/../.resol)
#-- Chemistrie FLAG to ease chemistries configurations management
#CHEM="AER"
[ -f ${SUBMIT_DIR}/../.chimie ] && eval $(grep CHEM ${SUBMIT_DIR}/../.chimie)

#D-
#D--------------------------------------------------------------------==
#D- 0.1 COMMON ENVIRONMENT
#D-     - Read libIGCM compatibility version in config.card
#D-     - Read UserChoices section
#D-     - Read Ensemble section
#D-     - Read Post section
#D-     - Define all netcdf output directories
#D--------------------------------------------------------------------==
IGCM_config_CommonConfiguration ${SUBMIT_DIR}/config.card

if [ ! -r ${SUBMIT_DIR}/run.card ] ; then
  #================================================#
  #         The file run.card doesn't exist        #
  #================================================#
  FirstInitialize=true
  #copy initial run.card
  IGCM_sys_Cp ${SUBMIT_DIR}/run.card.init ${SUBMIT_DIR}/run.card
  IGCM_debug_Print 2 "run.card copied from run.card.init"
else
  FirstInitialize=false
  IGCM_debug_Print 2 "run.card exists"
fi

# ------------------------------------------------------------------
# Activate BigBrother so as to supervise this simulation
# ------------------------------------------------------------------
IGCM_debug_BigBro_Initialize

#D-
#D--------------------------------------------------------------------==
#D- 1. INITIALIZE CONFIGURATION
#D-    - Simulation configuration
#D-    - Simulation parameters
#D-    - Execution parameter
#D-    - Define input files directory
#D-    - Read or initialize CumulPeriod
#D-    - run.card
#D--------------------------------------------------------------------==
IGCM_config_Initialize

# --------------------------------------------------------------------==
# Define, create and cd RUN_DIR
# --------------------------------------------------------------------==
RUN_DIR=${RUN_DIR_PATH}/${config_UserChoices_JobName}.${$}
IGCM_sys_MkdirWork ${RUN_DIR}
IGCM_sys_Cd ${RUN_DIR}

# ------------------------------------------------------------------
# Test if all was right before proceeding further
# ------------------------------------------------------------------
IGCM_debug_Verif_Exit

#D-
#D---------------------------------------------------------------------==
#D- 2. INITIALIZE ALL COMPONENT OF THE CONFIGURATION
#D-    - Define component executable
#D-    - Define Write Frequency by component "1M" "1D" ...
#D-    - Source ${comp}.driver
#D-    - Define Storage Places by component
#D-    - ${comp}_Initialize :
#D-    - Patterns to sed
#D-    - Variables from namelist
#D---------------------------------------------------------------------==
IGCM_comp_Initialize

#D-
#D---------------------------------------------------------------------==
#D- 3. PERFORM GENERAL VERIFICATION
#D-    - Verify compatibility of period length, write frequencies, ...
#D-    - Verify compatibility of rebuild choices and post-process choices
#D-    - Will stop here if something is wrong
#D---------------------------------------------------------------------==
IGCM_config_Check

# ------------------------------------------------------------------
# Test if all was right before entering the period loop
# ------------------------------------------------------------------
IGCM_debug_Verif_Exit

#D-
#D---------------------------------------------------------------------==
#D- 4. ENTER THE DEEP EXECUTION LOOP
#D-    ! FASTEN YOUR SEAT BELTS PLEASE. !
#D-    !   WE WILL CROSS TURBULENCES.   !
#D---------------------------------------------------------------------==

Period=1

PeriodContinue=false
if [ ${Period} -le ${PeriodNb} ]; then
  PeriodContinue=true
fi
while ( ${PeriodContinue} ) ; do

  echo
  echo "Starting iteration ${Period} / ${PeriodNb}"

  #D-
  # ------------------------------------------------------------------
  #D-   4.1 COMPUTE AND DEFINE DATE INFORMATION.
  #D-       - ${PeriodDateBegin}
  #D-       - ${PeriodDateEnd}
  #D-       - ${CumulPeriod}
  #D-       - ${DatesPeriod}=${PeriodDateBegin}_${PeriodDateEnd}
  #D-       - ${PeriodLength} => JOURS=31 , 28, 29, 30 ; MOIS=0 ; ANS=0
  #D-       - update run.card value
  # ------------------------------------------------------------------
  IGCM_config_PeriodStart

  #D-
  # ------------------------------------------------------------------
  #D-   4.2 BEGIN COMPUTATION ONLY IF NEEDED
  # ------------------------------------------------------------------
  if [ ${SimulationLengthInDays} -gt ${ExperienceLengthInDays} ] ; then
    IGCM_debug_Print 1 "break because '\${SimulationLengthInDays} -gt \${ExperienceLengthInDays}' : ${SimulationLengthInDays} -gt ${ExperienceLengthInDays}"
    break ;
  fi

  #D-
  # ------------------------------------------------------------------
  #D-   4.3 CALL OPTIONNAL FUNCTION WITHIN DRIVER
  #D-       - to set special variables used in lists (Param, Init or Bc).
  # ------------------------------------------------------------------
  IGCM_comp_PeriodStart

  #D-
  # ------------------------------------------------------------------
  #D-   4.4 GET PARAMETERS TEXT FILES UPDATED BY JOB
  #D-       - (.def, namelist ...)
  #D-       - READ AND USE BY GCM AT EACH EXECUTION.
  # ------------------------------------------------------------------
  IGCM_comp_GetInputParametersFiles

  #D-
  # ------------------------------------------------------------------
  #D-   4.5 GET INITIAL STATE
  #D-       - (Etat0, carteveg,relief...)
  #D-       - NECESSARY ONLY IF CumulPeriod= (=> NUMERO) == 1
  #D-       - AND ???_Restart=NO
  #D-       - READ AND USE BY GCM FOR ONLY ONE EXECUTION.
  # ------------------------------------------------------------------
  IGCM_comp_GetInputInitialStateFiles

  #D-
  # ------------------------------------------------------------------
  #D-   4.6 GET BOUNDARIES CONDITIONS
  #D-       - (SST, WIND[X,Y,Z], LAI ...)
  #D-       - READ AND USE BY GCM AT EACH EXECUTION.
  # ------------------------------------------------------------------
  IGCM_comp_GetInputBoundaryFiles

  #D-
  # ------------------------------------------------------------------
  #D-   4.7 GET SmoothFiles CONDITIONS
  #D-       - (SST, WIND[X,Y,Z], LAI ...)
  #D-       - READ AND USE BY GCM AT EACH EXECUTION
  #D-       - Do not change at each ${Period}
  # ------------------------------------------------------------------
  IGCM_comp_GetInputSmoothFiles

  #D-
  # ------------------------------------------------------------------
  #D-   4.8 GET RESTART FILES
  #D-       - (restartphy.nc, orca_restart.nc ...)
  #D-       - READ AND USE BY GCM AT EACH EXECUTION.
  #D-
  #D-       - IF A COMPONENT DO NOT RESTART FROM PREVIOULSY COMPUTED RESTART
  #D-       - ONLY IF CumulPeriod= (=> NUMERO) == 1
  #D-       - MUST EXECUTE CREATE ETAT0_LIMIT (TYPICALLY LMDZ AND ./create_etat0_limit.e)
  #D-
  #D-       - IF CumulPeriod == 1
  #D-       - AND A COMPONENT RESTART FROM PREVIOULSY COMPUTED RESTART
  #D-       - MUST BRING THIS RESTART IN ${RUN_DIR_PATH}
  #D-
  #D-       - ELSE BRING RESTART FROM ${JobName} IN ${RUN_DIR_PATH}
  # ------------------------------------------------------------------
  IGCM_comp_GetInputRestartFiles

  # ------------------------------------------------------------------
  # Test if all was right before Update
  # ------------------------------------------------------------------
  IGCM_debug_Verif_Exit

  #D-
  # ------------------------------------------------------------------
  #D-   4.9 ACTIVATE RUNNING ENVIRONNEMENT VARIABLES
  # ------------------------------------------------------------------
  IGCM_sys_activ_variables

  #D-
  # ------------------------------------------------------------------
  #D-   4.10 UPDATE ParametersFiles
  #D-        - (.def, namelist ...)
  #D-        - with current value of (ORCA_NIT00, ORCA_LRSTAR, RAZ_DATE, ...)
  # ------------------------------------------------------------------
  IGCM_comp_Update

  # ------------------------------------------------------------------
  # Test if all was right before execution
  # ------------------------------------------------------------------
  IGCM_debug_Verif_Exit

  #D-
  #D---------------------------------------------------------------------==
  #D- 5. EXECUTION
  #D---------------------------------------------------------------------==

  echo
  echo "#######################################"
  echo "#      DIR BEFORE RUN EXECUTION       #"
  echo "#######################################"
  echo
  ls -lrt

  echo "========================================================================"
  if [ ${DRYRUN} -le 1 ] ; then
    REAL_DATE_INIT=$( date )
    echo                                                                                   > ${Exe_Output}
    echo "#######################################"                                        >> ${Exe_Output}
    echo "EXECUTION of : ${EXECUTION}"
    echo "EXECUTION of : ${EXECUTION}"                                                    >> ${Exe_Output}
    echo                                                                                  >> ${Exe_Output}
    typeset RET
    RUN_DATE_BEGIN=$( date '+%Y-%m-%dT%H:%M:%S' )
    ${EXECUTION}  >> ${Exe_Output} 2>&1
    RET=$?
    RUN_DATE_END=$( date '+%Y-%m-%dT%H:%M:%S' )
    if [ ${RET} -gt 0 ] ; then
      echo "Return code of executable :" ${RET}
      IGCM_debug_Exit "EXECUTABLE"
      IGCM_sys_Mkdir ${SUBMIT_DIR}/Debug
      IGCM_sys_Cp ${Exe_Output} ${SUBMIT_DIR}/Debug/${PREFIX}_${Exe_Output}_error
      ExecutionFail=true
    fi
    echo                                            >> ${Exe_Output}
    echo "#######################################"  >> ${Exe_Output}
    echo "libIGCM RunDateBegin=${RUN_DATE_BEGIN}"   >> ${Exe_Output}
    echo "libIGCM RunDateEnd=${RUN_DATE_END}"       >> ${Exe_Output}
    echo                                            >> ${Exe_Output}
  else
    echo "EXECUTION of : ${EXECUTION} simulated for DRYRUN = " $DRYRUN
    echo "EXECUTION of : ${EXECUTION} simulated for DRYRUN = " $DRYRUN > ${Exe_Output}
    if ( $DEBUG_debug ) ; then
      echo "FOR EXECUTION DRYRUN mode = " $DRYRUN >> stack
    fi
  fi
  echo "========================================================================"

  echo
  echo "#######################################"
  echo "#       DIR AFTER RUN EXECUTION       #"
  echo "#######################################"
  echo
  ls -lrt

  #D-
  #D---------------------------------------------------------------------==
  #D- 6. POST EXECUTION OPERATIONS
  #D---------------------------------------------------------------------==

  #D-
  # ------------------------------------------------------------------
  #D-   6.1. DESACTIVATE RUNNING ENVIRONNEMENT VARIABLES
  # ------------------------------------------------------------------
  IGCM_sys_desactiv_variables

  #D-
  # ------------------------------------------------------------------
  #D-   6.2. SAVE OUTPUTS
  #D-        - On archive/storage machine
  #D-        - netcdf outputs, restarts and text files of models
  # ------------------------------------------------------------------
  IGCM_comp_Finalize

  # ------------------------------------------------------------------
  # Test if all was right after Finalize
  # ------------------------------------------------------------------
  IGCM_debug_Verif_Exit

  #D-
  # ------------------------------------------------------------------
  #D-   6.3. CONFIGURE POST-PROCESSING
  #D-        - asynchronous post-treatment (Level 0) when necessary (rebuild/pack)
  #D-        - classic post-treatment      (Level 1) when necessary (TimeSeries/Seasonal)
  # ------------------------------------------------------------------
  IGCM_post_Configure

  #D-
  # ------------------------------------------------------------------
  #D-   6.4. SUBMIT POST-PROCESSING
  #D-        - remote rebuild or/and post-treatment process if necessary
  # ------------------------------------------------------------------
  IGCM_post_Submit

  #D-
  # ------------------------------------------------------------------
  #D-   6.5. FINALYZE CURRENT LOOP AND PREPARE NEXT ONE
  #D-        - Manage executable size to save only different binary
  #D-        - Write in run.card user, system and elapse time
  #D-        - Check that everything went well ! No ? then we stop.
  #D-        - Determine next computed period
  # ------------------------------------------------------------------
  IGCM_config_PeriodEnd

  echo "Ending iteration ${Period}"
  (( Period = Period + 1 ))

  # End loop if date end is reached
  if [ ${SimulationLengthInDays} -ge ${ExperienceLengthInDays} ] ; then
    break ;
  fi

  PeriodContinue=false
  if [ ${Period} -le ${PeriodNb} ]; then
    PeriodContinue=true
  fi
done

#D-
#D---------------------------------------------------------------------==
#D- 7. SUBMIT NEXT JOB OR SEND MAIL IF SIMULATION IS OVER.
#D---------------------------------------------------------------------==
IGCM_config_Finalize

date