Context Navigation

source: trunk/libIGCM/libIGCM_config/libIGCM_config.ksh @ 911

Last change on this file since 911 was 911, checked in by sdipsl, 11 years ago
Ada compute node don't see gaya
Property licence set to The following licence information concerns ONLY the libIGCM tools ================================================================== Copyright © Centre National de la Recherche Scientifique CNRS Commissariat à l'Énergie Atomique CEA libIGCM : Library for Portable Models Computation of IGCM Group. IGCM Group is the french IPSL Global Climate Model Group. This library is a set of shell scripts and functions whose purpose is the management of the initialization, the launch, the transfer of output files, the post-processing and the monitoring of datas produce by any numerical program on any plateforme. This software is governed by the CeCILL license under French law and abiding by the rules of distribution of free software. You can use, modify and/ or redistribute the software under the terms of the CeCILL license as circulated by CEA, CNRS and INRIA at the following URL "http://www.cecill.info". As a counterpart to the access to the source code and rights to copy, modify and redistribute granted by the license, users are provided only with a limited warranty and the software's author, the holder of the economic rights, and the successive licensors have only limited liability. In this respect, the user's attention is drawn to the risks associated with loading, using, modifying and/or developing or reproducing the software by the user in light of its specific status of free software, that may mean that it is complicated to manipulate, and that also therefore means that it is reserved for developers and experienced professionals having in-depth computer knowledge. Users are therefore encouraged to load and test the software's suitability as regards their requirements in conditions enabling the security of their systems and/or data to be ensured and, more generally, to use and operate it in the same conditions as regards security. The fact that you are presently reading this means that you have had knowledge of the CeCILL license and that you accept its terms. Property svn:keywords set to `Revision Author Date`
File size: 52.7 KB

Line
1	#!/bin/ksh
2
3	#**************************************************************
4	# Author: Sebastien Denvil, Martial Mancip
5	# Contact: Sebastien.Denvil__at__ipsl.jussieu.fr Martial.Mancip__at__ipsl.jussieu.fr
6	# $Revision:: $ Revision of last commit
7	# $Author:: $ Author of last commit
8	# $Date:: $ Date of last commit
9	# IPSL (2006)
10	# This software is governed by the CeCILL licence see libIGCM/libIGCM_CeCILL.LIC
11	#
12	#**************************************************************
13
14	#===================================
15	function IGCM_config_CommonConfiguration
16	{
17	IGCM_debug_PushStack "IGCM_config_CommonConfiguration" $@
18
19	# Debug Print :
20	[ ${Verbosity} -gt 0 ] && echo
21	IGCM_debug_Print 1 "IGCM_config_CommonConfiguration" $@
22
23	# config.card path
24	configPath=$1
25
26	#==================================
27	typeset option auxprint CompatibilityTag
28
29	#==================================
30	# Read libIGCM compatibility version in config.card
31	IGCM_card_DefineVariableFromOption ${configPath} Compatibility libIGCM
32	eval CompatibilityTag=${config_Compatibility_libIGCM} > /dev/null 2>&1
33
34	if [ ! "${CompatibilityTag}" = "${libIGCM_CurrentTag}" ] ; then
35	IGCM_debug_Exit "config.card is not compatible with libIGCM version ${libIGCM_CurrentTag} see libIGCM FAQ http://wiki.ipsl.jussieu.fr/wiki_ipsl/IGCMG/libIGCM/DocUtilisateur/FAQ ."
36	fi
37
38	#==================================
39	# Read UserChoices section:
40	[ ${Verbosity} -gt 0 ] && echo
41	IGCM_debug_Print 1 "DefineArrayFromOption : config_UserChoices"
42
43	IGCM_card_DefineArrayFromSection ${configPath} UserChoices
44	for option in ${config_UserChoices[*]} ; do
45	IGCM_card_DefineVariableFromOption ${configPath} UserChoices ${option}
46	eval auxprint=\${config_UserChoices_${option}}
47	IGCM_debug_Print 3 "${option} : ${auxprint}"
48	done
49
50	#==================================
51	# Read Ensemble section:
52	[ ${Verbosity} -gt 0 ] && echo
53	IGCM_debug_Print 1 "DefineArrayFromOption : config_Ensemble"
54
55	IGCM_card_DefineArrayFromSection ${configPath} Ensemble
56	for option in ${config_Ensemble[*]} ; do
57	IGCM_card_DefineVariableFromOption ${configPath} Ensemble ${option}
58	eval auxprint=\${config_Ensemble_${option}}
59	IGCM_debug_Print 3 "${option} : ${auxprint}"
60	done
61
62	#==================================
63	# Read Post section:
64	[ ${Verbosity} -gt 0 ] && echo
65	IGCM_debug_Print 1 "DefineArrayFromOption : config_Post"
66
67	IGCM_card_DefineArrayFromSection ${configPath} Post
68	for option in ${config_Post[*]} ; do
69	IGCM_card_DefineVariableFromOption ${configPath} Post ${option}
70	eval auxprint=\${config_Post_${option}}
71	IGCM_debug_Print 3 "${option} : ${auxprint}"
72	done
73	[ ${Verbosity} -gt 0 ] && echo
74
75	#==================================
76	# Define default value to keep compatibility with previous card: means before changes due to TGCC
77	# Apply some overrules to ensure proper usage of computing centres resources
78	#
79	if [ X${PackDefault} = Xtrue ] ; then
80	# If we DO apply pack in this computing center
81	IGCM_debug_Print 1 "Due to inodes policy OVERRULE RebuildFromArchive value to NONE"
82	config_Post_RebuildFromArchive=NONE
83	if [ X${config_UserChoices_SpaceName} = XTEST ]; then
84	# TEST simulations will not be packed and will stay on SCRATCHDIR filesystem
85	IGCM_debug_Print 1 "SpaceName=TEST. OVERRULE PackFrequency to NONE"
86	IGCM_debug_Print 1 "SpaceName=TEST. OVERRULE destination path directories"
87	config_Post_PackFrequency=NONE
88	IGCM_sys_ChangeArchive
89	else
90	# Default to RebuildFrequency if nothing has been set up related to PackFrequency
91	[ X${config_Post_PackFrequency} = X ] && config_Post_PackFrequency=${config_Post_RebuildFrequency}
92	fi
93	else
94	# If we DO NOT apply pack in this computing center
95	config_Post_PackFrequency=NONE
96	fi
97
98	#====================================================
99	# R_SAVE : Job output directory
100	# R_BUFR : Job output buffered directory
101
102	if ( [ ! X${config_UserChoices_SpaceName} = X ] && [ ! X${config_UserChoices_ExperimentName} = X ] ) ; then
103	FreeName=$( echo ${config_UserChoices_JobName} \| sed 's/.*_//' )
104	if ( [ ! X${config_Ensemble_EnsembleName} = X ] && [ ! X${config_Ensemble_EnsembleDate} = X ] ) ; then
105	R_SAVE=${R_OUT}/${config_UserChoices_TagName}/${config_UserChoices_SpaceName}/${config_UserChoices_ExperimentName}/${config_Ensemble_EnsembleName}/${config_Ensemble_EnsembleDate}/${FreeName}
106	R_FIGR=${R_FIG}/${config_UserChoices_TagName}/${config_UserChoices_SpaceName}/${config_UserChoices_ExperimentName}/${config_Ensemble_EnsembleName}/${config_Ensemble_EnsembleDate}/${FreeName}
107	R_BUFR=${R_BUF}/${config_UserChoices_TagName}/${config_UserChoices_SpaceName}/${config_UserChoices_ExperimentName}/${config_Ensemble_EnsembleName}/${config_Ensemble_EnsembleDate}/${FreeName}
108	R_DODS=${config_UserChoices_TagName}/${config_UserChoices_SpaceName}/${config_UserChoices_ExperimentName}/${config_Ensemble_EnsembleName}/${config_Ensemble_EnsembleDate}/${FreeName}
109	else
110	R_SAVE=${R_OUT}/${config_UserChoices_TagName}/${config_UserChoices_SpaceName}/${config_UserChoices_ExperimentName}/${FreeName}
111	R_FIGR=${R_FIG}/${config_UserChoices_TagName}/${config_UserChoices_SpaceName}/${config_UserChoices_ExperimentName}/${FreeName}
112	R_BUFR=${R_BUF}/${config_UserChoices_TagName}/${config_UserChoices_SpaceName}/${config_UserChoices_ExperimentName}/${FreeName}
113	R_DODS=${config_UserChoices_TagName}/${config_UserChoices_SpaceName}/${config_UserChoices_ExperimentName}/${FreeName}
114	fi
115	else
116	if ( [ ! X${config_Ensemble_EnsembleName} = X ] && [ ! X${config_Ensemble_EnsembleDate} = X ] ) ; then
117	R_SAVE=${R_OUT}/${config_UserChoices_TagName}/${config_Ensemble_EnsembleName}/${config_Ensemble_EnsembleDate}/${config_UserChoices_JobName}
118	R_FIGR=${R_FIG}/${config_UserChoices_TagName}/${config_Ensemble_EnsembleName}/${config_Ensemble_EnsembleDate}/${config_UserChoices_JobName}
119	R_BUFR=${R_BUF}/${config_UserChoices_TagName}/${config_Ensemble_EnsembleName}/${config_Ensemble_EnsembleDate}/${config_UserChoices_JobName}
120	R_DODS=${config_UserChoices_TagName}/${config_Ensemble_EnsembleName}/${config_Ensemble_EnsembleDate}/${config_UserChoices_JobName}
121	else
122	R_SAVE=${R_OUT}/${config_UserChoices_TagName}/${config_UserChoices_JobName}
123	R_FIGR=${R_FIG}/${config_UserChoices_TagName}/${config_UserChoices_JobName}
124	R_BUFR=${R_BUF}/${config_UserChoices_TagName}/${config_UserChoices_JobName}
125	R_DODS=${config_UserChoices_TagName}/${config_UserChoices_JobName}
126	fi
127	fi
128
129	#====================================================
130	# Define REBUILD_DIR : where we store files needing rebuild process
131	if [ X${config_Post_RebuildFromArchive} = Xtrue ] ; then
132	REBUILD_DIR=${R_SAVE}/REBUILD
133	if [ ! X${TaskType} = Xchecking ] ; then
134	IGCM_sys_MkdirArchive ${REBUILD_DIR}
135	fi
136	else
137	REBUILD_DIR=${R_BUFR}/REBUILD
138	if [ ! X${TaskType} = Xchecking ] ; then
139	IGCM_sys_MkdirWork ${REBUILD_DIR}
140	fi
141	fi
142
143	#====================================================
144	# DodsCopy : apply default value if not defined
145	if ( [ X${config_Post_DodsCopy} = X${NULL_STR} ] \|\| [ X${config_Post_DodsCopy} = X ] ) ; then
146	config_Post_DodsCopy=TRUE
147	fi
148
149	IGCM_debug_PopStack "IGCM_config_CommonConfiguration"
150	}
151
152	#===================================
153	function IGCM_config_Initialize
154	{
155	IGCM_debug_PushStack "IGCM_config_Initialize"
156
157	# Debug Print :
158	echo
159	IGCM_debug_Print 1 "IGCM_config_Initialize"
160
161	if [ ! -r ${SUBMIT_DIR}/run.card ] ; then
162	#================================================#
163	# The file run.card doesn't exist #
164	#================================================#
165	FirstInitialize=true
166	#copy initial run.card
167	IGCM_sys_Cp ${SUBMIT_DIR}/run.card.init ${SUBMIT_DIR}/run.card
168	IGCM_debug_Print 2 "run.card copied from run.card.init"
169	else
170	FirstInitialize=false
171	IGCM_debug_Print 2 "run.card exists"
172	fi
173
174	# Test modipsl tree existence.
175	IGCM_sys_TestDir ${MODIPSL}
176	[ $? != 0 ] && IGCM_debug_Exit "IGCM_sys_TestDir"
177	IGCM_sys_TestDir ${libIGCM}
178	[ $? != 0 ] && IGCM_debug_Exit "IGCM_sys_TestDir"
179	IGCM_sys_TestDir ${R_EXE}
180	[ $? != 0 ] && IGCM_debug_Exit "IGCM_sys_TestDir"
181	IGCM_sys_TestDir ${SUBMIT_DIR}
182	[ $? != 0 ] && IGCM_debug_Exit "IGCM_sys_TestDir"
183
184	if ( $DEBUG_debug ) ; then
185	echo "Keep trace of inital SUBMIT_DIR : "
186	ls -lta ${SUBMIT_DIR}
187	fi
188
189	#==================================
190	# Read libIGCM compatibility version in config.card
191	# Read UserChoices section
192	# Read Ensemble section
193	# Read Post section
194	# Define all netcdf output directories
195	#==================================
196	IGCM_config_CommonConfiguration ${SUBMIT_DIR}/config.card
197
198	#==================================
199	# Read ListOfComponents section:
200	echo
201	IGCM_debug_Print 1 "DefineArrayFromSection : ListOfComponents"
202
203	IGCM_card_DefineArrayFromSection ${SUBMIT_DIR}/config.card ListOfComponents
204	for comp in ${config_ListOfComponents[*]} ; do
205	IGCM_card_DefineArrayFromOption ${SUBMIT_DIR}/config.card ListOfComponents ${comp}
206	done
207	IGCM_debug_Print 3 ${config_ListOfComponents[*]}
208
209	#==================================
210	# Read Executable section:
211	IGCM_card_DefineArrayFromSection ${SUBMIT_DIR}/config.card Executable
212
213	#==================================
214	# Read Restarts section:
215	# Restarts : Gerneral rule or local for each component.
216	echo
217	IGCM_debug_Print 1 "DefineArrayFromOption : config_Restarts"
218
219	IGCM_card_DefineArrayFromSection ${SUBMIT_DIR}/config.card Restarts
220	for option in ${config_Restarts[*]} ; do
221	IGCM_card_DefineVariableFromOption ${SUBMIT_DIR}/config.card Restarts ${option}
222	eval auxprint=\${config_Restarts_${option}}
223	IGCM_debug_Print 3 "${option} : ${auxprint}"
224	done
225
226	#==================================
227	# Define Job Outputs Name
228	echo
229	IGCM_debug_Print 2 "Define Script_Output_Prefix and Exe_Output"
230	eval Script_Output_Prefix=${config_UserChoices_Script_Output_Prefix:='Script_Output'}
231	IGCM_debug_Print 3 "Script_Output_Prefix = ${Script_Output_Prefix}"
232	eval Exe_Output=out_execution
233	IGCM_debug_Print 3 "Exe_Output = ${Exe_Output}"
234
235	#===================================================================#
236	# Prepare variables available for ${COMP}.card and ${COMP}.driver #
237	# But available to any son functions #
238	#===================================================================#
239
240	# Convert yyyy-mm-dd date to gregorian yyyymmdd
241	DateBegin=$( IGCM_date_ConvertFormatToGregorian ${config_UserChoices_DateBegin} )
242	DateEnd=$( IGCM_date_ConvertFormatToGregorian ${config_UserChoices_DateEnd} )
243
244	# Period Length In Days between DateBegin and DateEnd
245	(( ExperienceLengthInDays=$( IGCM_date_DaysBetweenGregorianDate ${DateEnd} ${DateBegin} ) + 1 ))
246	if [ ${ExperienceLengthInDays} -lt 0 ] ; then
247	IGCM_debug_Print 1 "Problem with dates in config.card : ${DateEnd} < ${DateBegin} ! You must check that."
248	IGCM_debug_Exit "IGCM_config_Initialize" " Wrong Dates."
249	IGCM_debug_Verif_Exit
250	fi
251
252	# Day and Year of Initial State (Given in julian format)
253	InitDay=$(( $( IGCM_date_ConvertGregorianDateToJulian $DateBegin ) % 1000 ))
254	InitYear=$(( $( IGCM_date_ConvertGregorianDateToJulian $DateBegin ) / 1000 ))
255
256	#================================================================#
257	# Test and Prepare directories #
258	#================================================================#
259
260	# ==> 4 kinds of input files :
261	# 1) R_INIT : Initial State Files (Etat0, carteveg)
262	# 2) R_BC : Boundary Conditions (Forcages, lai)
263	# 3) Parameters files (allready define through ${SUBMIT_DIR})
264	# 4) Restarts files (allready define in IGCM_config_Initialize)
265
266	# Here we offer the possibility to redefine R_INIT, R_BC
267	# and PeriodNb through config.card
268	R_INIT=${config_UserChoices_R_INIT:=${R_IN}/INIT}
269	echo
270	IGCM_debug_Print 2 "(Re)Define R_INIT, R_BC and PeriodNb"
271	IGCM_debug_Print 3 "R_INIT=${R_INIT}"
272	R_BC=${config_UserChoices_R_BC:=${R_IN}/BC}
273	IGCM_debug_Print 3 "R_BC=${R_BC}"
274	PeriodNb=${config_UserChoices_PeriodNb:=${PeriodNb}}
275	IGCM_debug_Print 3 "Loop in main Job with ${PeriodNb} period(s)"
276
277	# Test Archive input/output.
278	echo
279	IGCM_sys_TestDirArchive ${ARCHIVE}
280	[ $? != 0 ] && IGCM_debug_Exit "IGCM_sys_TestDirArchive"
281
282	# SD ADA SPECIFIC #
283	# TO FIX #
284	#IGCM_sys_TestDirArchive ${R_IN}
285	#[ $? != 0 ] && IGCM_debug_Exit "IGCM_sys_TestDirArchive"
286
287	if ( ${FirstInitialize} ) ; then
288	IGCM_sys_MkdirArchive ${R_SAVE}
289	[ ! ${config_Post_PackFrequency} = NONE ] && IGCM_sys_Mkdir ${R_BUFR}
290	else
291	IGCM_sys_TestDirArchive ${R_SAVE}
292	[ $? != 0 ] && IGCM_debug_Exit "IGCM_sys_TestDirArchive ${R_SAVE}"
293
294	if [ ! ${config_Post_PackFrequency} = NONE ] ; then
295	IGCM_sys_TestDir ${R_BUFR}
296	[ $? != 0 ] && IGCM_debug_Exit "IGCM_sys_TestDir ${R_BUFR}"
297	fi
298
299	#Test state of run in run.card
300	IGCM_card_DefineVariableFromOption ${SUBMIT_DIR}/run.card Configuration PeriodState
301
302	if ( [ ${run_Configuration_PeriodState} != "Start" ] && [ ${run_Configuration_PeriodState} != "Running" ] && [ ${run_Configuration_PeriodState} != "OnQueue" ] && [ ${run_Configuration_PeriodState} != "Continue" ] ) ; then
303	echo
304	IGCM_debug_Print 1 "!! Error in run.card with PeriodState : " ${run_Configuration_PeriodState} "!!"
305	IGCM_debug_Print 1 "Try running ${libIGCM}/clean_month.job to fix this"
306	IGCM_debug_Exit
307	IGCM_debug_Verif_Exit
308	fi
309	fi
310
311	#====================================================
312	# Experience type : DEB(ug), DEV(elopment), RUN
313	if [ X${JobType} != XRUN ] ; then
314	echo
315	echo "===================================================="
316	echo "libIGCM JOB is NOT in RUN type mode."
317	echo "!! OUTPUT files will NOT be PROTECTED !!"
318	echo "Be carefull : you can ERASE the result of this job !"
319
320	case ${JobType} in
321	DEB)
322	echo "DEBUG mode : activation of 'set -vx' mode."
323	echo "DEBUG mode : no protection for output files."
324	echo "DEBUG mode : if active force asynchronous rebuild frequency to PeriodLength frequency."
325	;;
326	DEV)
327	echo "DEVelopment mode : no protection for output files."
328	echo "DEVelopment mode : if active force asynchronous rebuild frequency to PeriodLength frequency."
329	;;
330	esac
331
332	if ( [ X${config_Post_RebuildFrequency} != XNONE ] && [ ${DRYRUN} -eq 0 ] ) ; then
333	if [ X${config_Post_RebuildFrequency} != X${config_UserChoices_PeriodLength} ] ; then
334	echo "------------"
335	echo "WARNING : Job is NOT in RUN mode then we will force REBUILD Frequency"
336	echo " to PeriodLength : ${config_UserChoices_PeriodLength}"
337	echo "------------"
338	config_Post_RebuildFrequency=${config_UserChoices_PeriodLength}
339	fi
340	fi
341	echo "===================================================="
342	echo
343	fi
344
345	#====================================================
346	#R_OUT_KSH : Storage place for job output
347	#R_OUT_EXE : Storage place for binary used during simulation
348	R_OUT_KSH=${R_SAVE}/Out
349	R_OUT_EXE=${R_SAVE}/Exe
350
351	#====================================================
352	#R_BUF_KSH : Buffer place for job output
353	#R_BUF_EXE : Buffer place for binary used during simulation
354	R_BUF_KSH=${R_BUFR}/Out
355	R_BUF_EXE=${R_BUFR}/Exe
356
357	IGCM_debug_PopStack "IGCM_config_Initialize"
358	}
359
360	#===================================
361	function IGCM_config_DaysInPeriodLength
362	{
363	IGCM_debug_PushStack "IGCM_config_DaysInPeriodLength"
364
365	typeset i
366
367	# Determine number of day(s) in PeriodLength :
368	case ${config_UserChoices_PeriodLength} in
369	Y\|y)
370	PeriodLengthInYears=$( echo ${config_UserChoices_PeriodLength} \| sed -e 's/[yY]//' )
371	echo
372	IGCM_debug_Print 2 "Number of years for PeriodLength : ${PeriodLengthInYears}"
373	PeriodLengthInDays=0
374	i=0
375	until [ $i -ge $PeriodLengthInYears ] ; do
376	(( PeriodLengthInDays = PeriodLengthInDays + $( IGCM_date_DaysInYear $(( year + i )) ) ))
377	(( i=i+1 ))
378	done
379	;;
380	M\|m)
381	PeriodLengthInMonths=$( echo ${config_UserChoices_PeriodLength} \| sed -e 's/[mM]//' )
382	echo
383	IGCM_debug_Print 2 "Number of months for PeriodLength : ${PeriodLengthInMonths}"
384	PeriodLengthInDays=0
385	i=0
386	until [ $i -ge $PeriodLengthInMonths ] ; do
387	if [ $(( 10#${month} + ${i} )) -lt 13 ] ; then
388	(( PeriodLengthInDays = PeriodLengthInDays + $( IGCM_date_DaysInMonth $year $(( 10#${month} + ${i} )) ) ))
389	else
390	(( PeriodLengthInDays = PeriodLengthInDays + $( IGCM_date_DaysInMonth $year $(( 10#${month} + ${i} - 12 )) ) ))
391	fi
392	(( i=i+1 ))
393	done
394	;;
395	D\|d)
396	PeriodLengthInMonths=0
397	PeriodLengthInDays=$( echo ${config_UserChoices_PeriodLength} \| sed -e 's/[dD]//' )
398	echo
399	IGCM_debug_Print 2 "Number of days for PeriodLength : ${PeriodLengthInDays}";;
400	*)
401	IGCM_debug_Exit "IGCM_config_DaysInPeriodLength " ${config_UserChoices_PeriodLength} " invalid period length : choose in Y, M, *D."
402	IGCM_debug_Verif_Exit ;;
403	esac
404
405	IGCM_debug_PopStack "IGCM_config_DaysInPeriodLength"
406	}
407
408	#===================================
409	function IGCM_config_DateCoherency
410	{
411	IGCM_debug_PushStack "IGCM_config_DateCoherency"
412
413	echo
414	IGCM_debug_Print 1 "IGCM_config_DateCoherency"
415	echo
416
417	typeset Length VerifiedPeriodDateBegin VerifiedPeriodDateEnd
418
419	# check coherency between (PeriodDateBegin, PeriodDateEnd) and (DateBegin, CumulPeriod, PeriodLength)
420	# DateBegin + CumulPeriod*PeriodLength = PeriodDateBegin
421	echo
422
423	case ${config_UserChoices_PeriodLength} in
424	Y\|y)
425	Length=$( IGCM_date_DaysInCurrentPeriod ${DateBegin} $(( ${CumulPeriod} * ${PeriodLengthInYears} ))Y )
426	;;
427	M\|m)
428	Length=$( IGCM_date_DaysInCurrentPeriod ${DateBegin} $(( ${CumulPeriod} * ${PeriodLengthInMonths} ))M )
429	;;
430	D\|d)
431	Length=$( IGCM_date_DaysInCurrentPeriod ${DateBegin} $(( ${CumulPeriod} * ${PeriodLengthInDays} ))D )
432	;;
433	esac
434	VerifiedPeriodDateEnd=$( IGCM_date_AddDaysToGregorianDate ${DateBegin} ${Length}-1 )
435
436	if [ ${VerifiedPeriodDateEnd} != ${PeriodDateEnd} ] ; then
437	IGCM_debug_Print 1 "From run.card PeriodDateEnd is not consistent with DateBegin and CumulPeriod."
438	IGCM_debug_Print 1 "We have DateBegin = ${DateBegin}"
439	IGCM_debug_Print 1 "We have CumulPeriod = ${CumulPeriod}"
440	IGCM_debug_Print 1 "We have PeriodDateEnd = ${PeriodDateEnd}"
441	IGCM_debug_Print 1 "We have VerifiedPeriodDateEnd = ${VerifiedPeriodDateEnd}"
442	IGCM_debug_Print 1 "You must have change run.card in an inconsistent way."
443
444	IGCM_debug_Exit "STOP here to avoid further issues."
445	fi
446
447	# PeriodDateBegin + PeriodLength = PeriodDateEnd
448	VerifiedPeriodDateBegin=$( IGCM_date_AddDaysToGregorianDate ${VerifiedPeriodDateEnd} $(( ${PeriodLengthInDays} * -1 )) )
449
450	IGCM_debug_PopStack "IGCM_config_DateCoherency"
451	}
452
453
454	#===================================
455	function IGCM_config_Check
456	{
457	IGCM_debug_PushStack "IGCM_config_Check"
458
459	# If one of the following modulo is not zero :
460	# we will issue an error then explain and exit in
461	# AA_job IGCM_debug_Verif_Exit call before binary submission
462
463	echo
464	IGCM_debug_Print 1 "IGCM_config_Check"
465	echo
466
467	typeset i
468
469	# Check RebuildFrequency against key frequencies : PeriodLength ; PackFrequency ; TimeSeriesFrequency ; SeasonalFrequency
470	if ( [ ! X${config_Post_RebuildFrequency} = X${NULL_STR} ] && [ ! X${config_Post_RebuildFrequency} = XNONE ] ) ; then
471	AsynchronousRebuild=true
472	IGCM_debug_Print 1 "Asynchronous rebuild has been activated."
473	echo
474	# modulo (RebuildFrequency and PeriodLength/TimeSeriesFrequency/SeasonalFrequency) must be zero
475	IGCM_debug_Print 1 "Check coherence between RebuildFrequency and PeriodLength"
476	IGCM_post_CheckModuloFrequency config_Post_RebuildFrequency config_UserChoices_PeriodLength
477	IGCM_debug_Print 1 "Check coherence between PackFrequency and RebuildFrequency"
478	IGCM_post_CheckModuloFrequency config_Post_PackFrequency config_Post_RebuildFrequency
479	IGCM_debug_Print 1 "Check coherence between TimeSeriesFrequency and RebuildFrequency"
480	IGCM_post_CheckModuloFrequency config_Post_TimeSeriesFrequency config_Post_RebuildFrequency
481	IGCM_debug_Print 1 "Check coherence between SeasonalFrequency and RebuildFrequency"
482	IGCM_post_CheckModuloFrequency config_Post_SeasonalFrequency config_Post_RebuildFrequency
483	else
484	AsynchronousRebuild=false
485	IGCM_debug_Print 1 "Asynchronous rebuild has not been activated"
486	IGCM_debug_Print 1 "Proceed with standard post-treatment pathway"
487	echo
488	#modulo (PeriodLength and TimeSeriesFrequency/SeasonalFrequency) must be zero
489	IGCM_debug_Print 1 "Check coherence between TimeSeriesFrequency and PeriodLength"
490	IGCM_post_CheckModuloFrequency config_Post_TimeSeriesFrequency config_UserChoices_PeriodLength
491	IGCM_debug_Print 1 "Check coherence between SeasonalFrequency and PeriodLength"
492	IGCM_post_CheckModuloFrequency config_Post_SeasonalFrequency config_UserChoices_PeriodLength
493	fi
494
495	# Check PackFrequency against other key frequencies
496	# Modulo (PackFrequency and TimeSeriesFrequency/SeasonalFrequency and PeriodLenght) must be zero
497	if ( [ ! X${config_Post_PackFrequency} = X${NULL_STR} ] && [ ! X${config_Post_PackFrequency} = XNONE ] ) ; then
498	Pack=true
499	#
500	IGCM_debug_Print 1 "Check coherence between PackFrequency and PeriodLength"
501	IGCM_post_CheckModuloFrequency config_Post_PackFrequency config_UserChoices_PeriodLength
502	IGCM_debug_Print 1 "Check coherence between TimeSeriesFrequency and PackFrequency"
503	IGCM_post_CheckModuloFrequency config_Post_TimeSeriesFrequency config_Post_PackFrequency
504	IGCM_debug_Print 1 "Check coherence between SeasonalFrequency and PackFrequency"
505	IGCM_post_CheckModuloFrequency config_Post_SeasonalFrequency config_Post_PackFrequency
506	else
507	Pack=false
508	fi
509
510	# modulo (TimeSeriesFrequency and all Chunck2D) must be zero
511	NbJob=${#CHUNCK2D_SIZE[@]}
512	i=0
513	until [ $i -ge $NbJob ]; do
514	value=${CHUNCK2D_SIZE[${i}]}
515	IGCM_debug_Print 1 "Check coherence between All Chunck2D frequency and TimeSeriesFrequency"
516	IGCM_post_CheckModuloFrequency value config_Post_TimeSeriesFrequency
517	case ${value} in
518	Y\|y) ;;
519	*)
520	IGCM_debug_Print 1 "All ChunckJob2D frequency must be expressed in year Y\|y in comp.card"
521	IGCM_debug_Exit "This will stop the job" ;;
522	esac
523	(( i=i+1 ))
524	done
525
526	# modulo (TimeSeriesFrequency and all Chunck3D) must be zero
527	NbJob=${#CHUNCK3D_SIZE[@]}
528	i=0
529	until [ $i -ge $NbJob ]; do
530	value=${CHUNCK3D_SIZE[${i}]}
531	IGCM_debug_Print 1 "Check coherence between All Chunck3D frequency and TimeSeriesFrequency"
532	IGCM_post_CheckModuloFrequency value config_Post_TimeSeriesFrequency
533	case ${value} in
534	Y\|y) ;;
535	*)
536	IGCM_debug_Print 1 "All ChunckJob3D frequency must be expressed in year Y\|y in comp.card"
537	IGCM_debug_Exit "This will stop the job" ;;
538	esac
539	(( i=i+1 ))
540	done
541
542	# check to be sure there is enough space on temporary filesystems to run
543	echo
544	IGCM_debug_Print 1 "Check if there is enough space on temporary filesystem"
545	IGCM_sys_check_quota
546
547	IGCM_debug_PopStack "IGCM_config_Check"
548	}
549
550	#===================================
551	function IGCM_config_PeriodStart
552	{
553	IGCM_debug_PushStack "IGCM_config_PeriodStart"
554
555	echo
556	IGCM_debug_Print 1 "IGCM_config_PeriodStart"
557	echo
558
559	if ( ${FirstInitialize} ) ; then
560	#================================================#
561	# Initialize date/period information #
562	#================================================#
563
564	IGCM_date_GetYearMonthDay ${DateBegin} year month day
565	IGCM_config_DaysInPeriodLength
566
567	eval PeriodDateBegin=${DateBegin} > /dev/null 2>&1
568	PeriodDateEnd=$( IGCM_date_AddDaysToGregorianDate ${DateBegin} $(( ${PeriodLengthInDays} - 1 )) )
569	eval CumulPeriod=1 > /dev/null 2>&1
570
571	#=================================================#
572	# Write updated run.card #
573	#=================================================#
574
575	#Correct run.card Configuration for this period
576	IGCM_card_WriteOption ${SUBMIT_DIR}/run.card Configuration PeriodDateBegin ${PeriodDateBegin}
577	IGCM_card_WriteOption ${SUBMIT_DIR}/run.card Configuration PeriodDateEnd ${PeriodDateEnd}
578	IGCM_card_WriteOption ${SUBMIT_DIR}/run.card Configuration CumulPeriod ${CumulPeriod}
579	if [ X$( grep "SubmitPath" ${SUBMIT_DIR}/run.card ) != X ] ; then
580	IGCM_card_WriteOption ${SUBMIT_DIR}/run.card Configuration SubmitPath ${SUBMIT_DIR}
581	fi
582
583	IGCM_card_WriteOption ${SUBMIT_DIR}/run.card Configuration PeriodState "Running"
584
585	else
586	#================================================#
587	# The file run.card allready exist #
588	#================================================#
589
590	#Test state of run in run.card
591	IGCM_card_DefineVariableFromOption ${SUBMIT_DIR}/run.card Configuration PeriodState
592	if ( [ ${run_Configuration_PeriodState} != "Running" ] && [ ${run_Configuration_PeriodState} != "OnQueue" ] && [ ${run_Configuration_PeriodState} != "Continue" ] ) ; then
593	echo
594	IGCM_debug_Print 1 "!! Error in run.card with PeriodState : " ${run_Configuration_PeriodState} "!!"
595	IGCM_debug_Print 1 "Try running ${libIGCM}/clean_month.job to fix this"
596	echo
597	IGCM_debug_Exit
598	IGCM_debug_Verif_Exit
599	fi
600
601	#===================================#
602	# Read updated run.card #
603	#===================================#
604
605	IGCM_card_DefineVariableFromOption ${SUBMIT_DIR}/run.card Configuration OldPrefix
606	IGCM_card_DefineVariableFromOption ${SUBMIT_DIR}/run.card Configuration PeriodDateBegin
607	IGCM_card_DefineVariableFromOption ${SUBMIT_DIR}/run.card Configuration PeriodDateEnd
608	IGCM_card_DefineVariableFromOption ${SUBMIT_DIR}/run.card Configuration CumulPeriod
609
610	PeriodDateBegin=$( IGCM_date_ConvertFormatToGregorian ${run_Configuration_PeriodDateBegin} )
611	PeriodDateEnd=$( IGCM_date_ConvertFormatToGregorian ${run_Configuration_PeriodDateEnd} )
612	eval CumulPeriod="${run_Configuration_CumulPeriod}" > /dev/null 2>&1
613
614	LastPeriodDateEnd=$( echo ${run_Configuration_OldPrefix} \| sed -e "s/${config_UserChoices_JobName}_//" )
615
616	if [ ${Period} = 1 ]; then
617	# save last Job output and current run.card
618	typeset Potential
619	IGCM_sys_Cd ${SUBMIT_DIR}
620	#
621	IGCM_debug_Print 2 "Save previous ksh job output"
622	for Potential in $( ls ${Script_Output_Prefix}_${config_UserChoices_JobName}.[0-9][0-9][0-9][0-9][0-9][0-9] ) ; do
623	if [ X${Pack} = Xtrue ] ; then
624	( IGCM_sys_TestFileBuffer ${R_BUF_KSH}/${Potential} ) \|\| IGCM_sys_PutBuffer_Out ${Potential} ${R_BUF_KSH}/${Potential}.$$ rw
625	else
626	( IGCM_sys_TestFileArchive ${R_OUT_KSH}/${Potential} ) \|\| IGCM_sys_Put_Out ${Potential} ${R_OUT_KSH}/${Potential}.$$ rw
627	fi
628	done
629	#
630	IGCM_debug_Print 2 "Save current run.card"
631	IGCM_card_CheckConflict run.card
632	if [ X${Pack} = Xtrue ] ; then
633	IGCM_sys_PutBuffer_Out ${SUBMIT_DIR}/run.card ${R_BUF_KSH}/run.card rw
634	else
635	IGCM_sys_Put_Out ${SUBMIT_DIR}/run.card ${R_OUT_KSH}/run.card rw
636	fi
637	#
638	IGCM_sys_Cd ${RUN_DIR}
639	else
640	unset FileToBeDeleted
641	fi
642
643	# Determine number of day(s) in PeriodLength
644	IGCM_date_GetYearMonthDay $PeriodDateBegin year month day
645	IGCM_config_DaysInPeriodLength
646
647	# Check coherency between (PeriodDateBegin, PeriodDateEnd) and (DateBegin, CumulPeriod, PeriodLength)
648	IGCM_config_DateCoherency
649	# And EXIT if not OK
650	IGCM_debug_Verif_Exit
651
652	IGCM_card_WriteOption ${SUBMIT_DIR}/run.card Configuration PeriodState "Running"
653	fi
654
655	# Save for futur use
656	OldPrefix=${config_UserChoices_JobName}_${PeriodDateEnd}
657
658	# BEGIN: SHOULD GO IN A FUNCTION FROM libIGCM_date.ksh
659	# Compute year_m1 and year_p1 (year minus 1Y and year plus 1Y)
660	year_m1=$(( year - 1 ))
661	year_p1=$(( year + 1 ))
662	# Compute month_m1 (month minus 1M)
663	# Compute yyyymm_m1 (yyyymm minus 1M)
664	month_m1=$(( 10#${month} - 1 ))
665	if [ ${month_m1} = 0 ]; then
666	month_m1=12
667	yyyymm_m1=${year_m1}12
668	elif [ ${month_m1} -le 9 ]; then
669	month_m1=0${month_m1}
670	yyyymm_m1=${year}${month_m1}
671	else
672	yyyymm_m1=${year}${month_m1}
673	fi
674	# Compute month_p1 (month plus 1M)
675	# Compute yyyymm_p1 (yyyymm plus 1M)
676	month_p1=$(( 10#${month} + 1 ))
677	if [ ${month_p1} = 13 ]; then
678	month_p1=01
679	yyyymm_p1=${year_p1}01
680	elif [ ${month_p1} -le 9 ]; then
681	month_p1=0${month_p1}
682	yyyymm_p1=${year}${month_p1}
683	else
684	yyyymm_p1=${year}${month_p1}
685	fi
686	#IGCM_debug_Print 1 "jg 1 month_m1 = ${month_m1} month_p1 = ${month_p1} "
687	#IGCM_debug_Print 1 "jg 1 calculate yyyymm_m1 = ${yyyymm_m1} "
688	#IGCM_debug_Print 1 "jg 1 calculate yyyymm_p1 = ${yyyymm_p1} "
689
690	#===================================================================#
691	# Calculate CyclicYear to be used for looping over a given forcing #
692	# period. Add CyclicBegin and CyclicEnd in config.card UserChoices. #
693	#===================================================================#
694
695	# To use the variable CyclicYear, one must add in config.card CyclicBegin and CyclicEnd.
696	# CyclicBegin is the first year in the cycle. CyclicEnd is the last year included in the cycle.
697	if ( [ ! X${config_UserChoices_CyclicBegin} = X ] && [ ! X${config_UserChoices_CyclicEnd} = X ] ) ; then
698	CycleNb=$(( ${config_UserChoices_CyclicEnd} - ${config_UserChoices_CyclicBegin} + 1 ))
699	CyclicYear_p1=NOTDEFINED
700
701	# For current year
702	yeartmp=$year
703	diffy=$(( $yeartmp - ${config_UserChoices_CyclicBegin} ))
704	while [ $diffy -lt 0 ] ; do
705	yeartmp=$(( ${yeartmp} + ${CycleNb} ))
706	diffy=$(( $yeartmp - ${config_UserChoices_CyclicBegin} ))
707	done
708	CyclicYear=$(( ( ${diffy} % ${CycleNb} ) + ${config_UserChoices_CyclicBegin} ))
709
710	# For next coming year
711	yeartmp=$(( $year + 1 ))
712	diffy=$(( $yeartmp - ${config_UserChoices_CyclicBegin} ))
713	while [ $diffy -lt 0 ] ; do
714	yeartmp=$(( ${yeartmp} + ${CycleNb} ))
715	diffy=$(( $yeartmp - ${config_UserChoices_CyclicBegin} ))
716	done
717	CyclicYear_p1=$(( ( ${diffy} % ${CycleNb} ) + ${config_UserChoices_CyclicBegin} ))
718
719	IGCM_debug_Print 1 "CyclicYear = ${CyclicYear}, CyclicYear_p1 = ${CyclicYear_p1}, current year=$year"
720	else
721	CyclicYear="ERROR_CyclicYear_Variable_Not_Defined"
722	CyclicYear_p1="ERROR_CyclicYear_p1_Variable_Not_Defined"
723	IGCM_debug_Print 1 "CyclicYear wont be use without adding CyclicBegin and CyclicEnd in config.card"
724	fi
725
726	# END: SHOULD GO IN A FUNCTION FROM libIGCM_date.ksh
727
728	#===================================================================#
729	# Prepare variables available for ${COMP}.card and ${COMP}.driver #
730	# But available to any son functions #
731	#===================================================================#
732
733	# Period Length In Days between DateBegin and DateCurrent (at end of period == PeriodDateEnd !)
734	(( SimulationLengthInDays = $( IGCM_date_DaysBetweenGregorianDate ${PeriodDateEnd} ${DateBegin} ) + 1 ))
735
736	# Debug Print :
737	echo
738	IGCM_debug_Print 1 "IGCM_config_PeriodStart : Before Execution"
739	IGCM_debug_Print 1 "Year of simulation : ${year}"
740	IGCM_debug_Print 1 "Month of simulation : ${month}"
741	IGCM_debug_Print 1 "PeriodLengthInDays : ${PeriodLengthInDays}"
742	IGCM_debug_Print 1 "PeriodDateBegin : ${PeriodDateBegin}"
743	IGCM_debug_Print 1 "PeriodDateEnd : ${PeriodDateEnd}"
744	IGCM_debug_Print 1 "SimulationLengthInDays : ${SimulationLengthInDays}"
745	IGCM_debug_Print 1 "ExperienceLengthInDays : ${ExperienceLengthInDays}"
746
747	#================================================================#
748	# Prepare variables available for comp_finalyze #
749	#================================================================#
750
751	# Period for save files
752	eval DatesPeriod=${PeriodDateBegin}_${PeriodDateEnd} > /dev/null 2>&1
753
754	# Prefix for save files of this period
755	eval PREFIX=${config_UserChoices_JobName}_${DatesPeriod} > /dev/null 2>&1
756
757	# List of files that will be deleted in RUN_DIR after run
758	[ -f stack ] && FileToBeDeleted[0]="stack"
759
760	# Test if the same run as already been saved :
761	if [ X${JobType} = XRUN ] ; then
762	if [ ${DRYRUN} -le 0 ] ; then
763	if ( IGCM_sys_TestFileBuffer ${R_BUF_KSH}/${PREFIX}_${Exe_Output} ) ; then
764	IGCM_debug_Exit "IGCM_config_PeriodStart" "You are currently RErunning an old job."
765	IGCM_debug_Print 1 "Because of readonly permissions, you can't RErun a job when saved files"
766	IGCM_debug_Print 1 " are still in the ARCHIVE directory. You must deleted those files, or "
767	IGCM_debug_Print 1 " the whole ${R_SAVE} tree. See clean_month.job in ${libIGCM} directory."
768	IGCM_debug_Print 1 " This exit has been initiated because at least ${R_BUF_KSH}/${PREFIX}_${Exe_Output} exists."
769	IGCM_debug_Verif_Exit
770	fi
771	fi
772	else
773	if ( IGCM_sys_TestFileBuffer ${R_BUF_KSH}/${PREFIX}_${Exe_Output} ) ; then
774	IGCM_debug_Print 1 "IGCM_config_PeriodStart" "RErun an old job. Allowed in DEBUG or DEV mode."
775	fi
776	fi
777
778	typeset ExeNameIn ExeNameFirst CompNameFirst
779	typeset comp i
780	typeset tempvar tempvarMPI tempvarNOD NbElts j NbExec
781
782	(( PROCESSUS_NUMBER = 0 ))
783	(( i=0 ))
784	(( NbExec=0 ))
785
786	OK_PARA_MPI=false
787	OK_PARA_OMP=false
788	OK_PARA_NOD=false
789	OK_PARA_MPMD=false
790
791	for comp in ${config_ListOfComponents[*]} ; do
792
793	IGCM_debug_Print 1 ${comp}
794
795	eval ExeNameIn=\${config_Executable_${comp}[0]}
796
797	# NO order in config.card for parallelized values !
798	# just use suffix : MPI , OMP and NOD (for number of NODes.)
799
800	# NOD is the number of NODes allocated
801	eval ${comp}_PROC_NOD=0
802
803	# MPI is the number of MPI processus per nodes
804	eval ${comp}_PROC_MPI=0
805
806	# OMP is the number of OpenMP threads per MPI processus
807	eval ${comp}_PROC_OMP=0
808
809	# Only if we really have an executable for the component :
810	### if [ X${ExeNameIn} != X\"\" ] ; then
811	if ( [ "X${ExeNameIn}" != X\"\" ] && [ "X${ExeNameIn}" != "Xinca.dat" ] ) ; then
812
813	# Keep the first executable found and the first CompName
814	ExeNameFirst=${ExeNameIn}
815	CompNameFirst=${comp}
816
817	# Are we a second executable?
818	(( NbExec = NbExec + 1 ))
819
820	# set 1 MPI task, 1 OpenMP thread and 1 node as default
821	eval ${comp}_PROC_MPI=1
822	eval ${comp}_PROC_OMP=1
823	eval ${comp}_PROC_NOD=1
824
825	eval NbElts=\${#config_Executable_${comp}[@]}
826
827	if [ ${NbElts} -ge 2 ] ; then
828	(( j = 2 ))
829
830	while [ $j -lt ${NbElts} ] ; do
831	eval tempvar=\${config_Executable_${comp}[${j}]}
832
833	if [ X${tempvar} = X ] ; then
834	echo "Error reading MPI/OMP parameters !!!"
835	echo "Check your config.card."
836	exit 1
837	fi
838
839	eval IGCM_debug_Print 2 ${tempvar}
840
841	case ${tempvar} in
842	[mM][pP][iI])
843	# Read MPI parameter for composante
844	eval ${comp}_PROC_MPI=$( echo ${tempvar} \| tr '[a-z]' '[A-Z]' \| sed -e "s/MPI//" )
845	OK_PARA_MPI=true;;
846	[oO][mM][pP])
847	# Read OMP parameter for composante
848	eval ${comp}_PROC_OMP=$( echo ${tempvar} \| tr '[a-z]' '[A-Z]' \| sed -e "s/OMP//" )
849	OK_PARA_OMP=true;;
850	[nN][oO][dD])
851	# Read NOD (NumBer of Nodes) parameter for composante
852	eval ${comp}_PROC_NOD=$( echo ${tempvar} \| tr '[a-z]' '[A-Z]' \| sed -e "s/NOD//" )
853	OK_PARA_NOD=true
854	OK_PARA_MPI=true;;
855	esac
856
857	(( j = j + 1 ))
858	done
859
860	fi
861
862	eval tempvarMPI=\${${comp}_PROC_MPI}
863	eval tempvarNOD=\${${comp}_PROC_NOD}
864	eval tempvarOMP=\${${comp}_PROC_OMP}
865
866	(( PROCESSUS_NUMBER = PROCESSUS_NUMBER + tempvarMPI * tempvarNOD * tempvarOMP ))
867
868	fi
869
870	(( i=i+1 ))
871	done
872
873	# set MPMD mode if more than 2 executable names.
874	[ ${NbExec} -ge 2 ] && OK_PARA_MPMD=true
875
876	# Verification of BATCH_NUM_PROC_TOT total number of processors set in job header.
877	if [ X${BATCH_NUM_PROC_TOT} != X ] ; then
878	# BATCH_NUM_PROC_TOT is set
879	if ( ${OK_PARA_MPI} ) ; then
880	IGCM_debug_Print 1 "MPI/OMP/NOD found into config.card and BATCH_NUM_PROC_TOT = ${BATCH_NUM_PROC_TOT} "
881	else
882	# with previous method.
883	if [ ${BATCH_NUM_PROC_TOT} -gt 1 ] ; then
884	# with more than 1 proc
885	if ( ${OK_PARA_MPMD} ) ; then
886	# with MPMD ie CPL/oasis method
887	echo "We will use default number of MPI tasks for this machine : "
888	echo "${DEFAULT_NUM_PROC_OCE} for OCE; "
889	echo "${DEFAULT_NUM_PROC_CPL} for CPL; "
890	echo "${DEFAULT_NUM_PROC_ATM} for ATM; "
891	echo "${DEFAULT_NUM_PROC_TOTAL} for the total number of processors; "
892	OK_PARA_MPI=true
893	CPL_PROC_MPI=${DEFAULT_NUM_PROC_CPL}
894	OCE_PROC_MPI=${DEFAULT_NUM_PROC_OCE}
895	ATM_PROC_MPI=${DEFAULT_NUM_PROC_ATM}
896	PROCESSUS_NUMBER=${DEFAULT_NUM_PROC_TOTAL}
897	else
898	# with have only one executable
899	echo "We will use ${BATCH_NUM_PROC_TOT} MPI tasks for ${CompNameFirst} : ${ExeNameFirst} "
900	OK_PARA_MPI=true
901	eval ${CompNameFirst}_PROC_MPI=${BATCH_NUM_PROC_TOT}
902	PROCESSUS_NUMBER=${BATCH_NUM_PROC_TOT}
903	fi
904	else
905	PROCESSUS_NUMBER=1
906	fi
907	fi
908	# Verification with PBS parameter
909	if [ ${BATCH_NUM_PROC_TOT} -ne ${PROCESSUS_NUMBER} ] ; then
910	echo "Warning with parallelization parameters !"
911	echo "Job header variable BATCH_NUM_PROC_TOT = ${BATCH_NUM_PROC_TOT} "
912	echo "is the total number of _processors_ reserved."
913	echo "It is not equal to the sum of _processus_ = ${PROCESSUS_NUMBER}."
914	echo "We stop now."
915	exit 1
916	fi
917	NUM_PROC_CPL=${CPL_PROC_MPI} # for backward compatibility
918	NUM_PROC_OCE=${OCE_PROC_MPI} # for backward compatibility
919	NUM_PROC_ATM=${ATM_PROC_MPI} # for backward compatibility
920	else # BATCH_NUM_PROC_TOT=""
921	if ( ${OK_PARA_MPI} ) ; then
922	echo "You have not given a value of ${BATCH_NUM_PROC_TOT} processors,"
923	echo "but you have filled the parallel parameter in config->Executable->list."
924	echo "Please add BATCH_NUM_PROC_TOT variable in job header."
925	echo "We stop now."
926	exit 1
927	else
928	# sequential case !
929	if [ ${PROCESSUS_NUMBER} -eq 0 ] ; then
930	(( PROCESSUS_NUMBER = 1 ))
931	echo "PROCESSUS_NUMBER is all 0 (sequential use of old definition in config->Executable->list)."
932	echo "We set it to 1."
933	fi
934	fi
935	fi
936
937	IGCM_debug_Print 1 "MPI/OMP treatment PROCESSUS_NUMBER = ${PROCESSUS_NUMBER}"
938
939	IGCM_sys_build_execution_scripts
940
941	ExecutionFail=false
942
943	IGCM_debug_PopStack "IGCM_config_PeriodStart"
944	}
945
946	#===================================
947	function IGCM_config_SaveSourceModifications
948	{
949	IGCM_debug_PushStack "IGCM_config_SaveSourceModifications"
950
951	typeset ExeOutDateMax listVarEnv
952	ExeOutDateMax=$1
953
954	listVarEnv="ExeOutDateMax,R_OUT_EXE,PREFIX,SUBMIT_DIR"
955	IGCM_sys_RshMaster "\
956	. ${libIGCM}/libIGCM_sys/libIGCM_sys.ksh; \
957	export ExeOutDateMax=${ExeOutDateMax};\
958	export R_OUT_EXE=${R_OUT_EXE};\
959	export PREFIX=${PREFIX};\
960	export SUBMIT_DIR=${SUBMIT_DIR};\
961	export listVarEnv=${listVarEnv};\
962	Script_Output=out_SaveSourceModifications;\
963	IGCM_sys_Qsub ${libIGCM}/SaveSourceModifications.job ${ExeOutDateMax} ${R_OUT_EXE} ${PREFIX} ${SUBMIT_DIR}"
964
965	IGCM_debug_PopStack "IGCM_config_SaveSourceModifications"
966	}
967
968	#===================================
969	function IGCM_config_PeriodEnd
970	{
971	IGCM_debug_PushStack "IGCM_config_PeriodEnd"
972
973	echo
974	IGCM_debug_Print 1 "IGCM_config_PeriodEnd"
975	echo
976
977	#==================================#
978	# Save Job output #
979	#==================================#
980	if [ X${Pack} = Xtrue ] ; then
981	IGCM_sys_PutBuffer_Out ${Exe_Output} ${R_BUF_KSH}/${PREFIX}_${Exe_Output}
982	else
983	IGCM_sys_Put_Out ${Exe_Output} ${R_OUT_KSH}/${PREFIX}_${Exe_Output}
984	fi
985	eval FileToBeDeleted[${#FileToBeDeleted[@]}]="${Exe_Output}"
986
987	if [ ${DRYRUN} -le 1 ] ; then
988
989	IGCM_debug_Print 1 "Check components binary : size and creation date"
990
991	typeset LS_comp LS_bin ExeDate ExeCpuLog NextExeSize LastCompExeSize
992	typeset comp i
993	typeset ExeNameIn ExeNameOut UpdateExe ExeSecDateMax
994
995	#==================================#
996	# Get last Exe Size #
997	#==================================#
998
999	(( i=0 ))
1000	if ( ${FirstInitialize} ) ; then
1001	run_Log_LastExeSize=""
1002	for comp in ${config_ListOfComponents[*]} ; do
1003	run_Log_LastExeSize[$i]=0
1004	(( i=i+1 ))
1005	done
1006	else
1007	IGCM_card_DefineArrayFromOption ${SUBMIT_DIR}/run.card Log LastExeSize
1008	fi
1009	#==================================#
1010	# And Build ExeDate #
1011	#==================================#
1012
1013	# ExeDate = ATM_Jun_12_09:34-SRF_Jun_12_09:34-OCE_Jun_12_09:34-ICE_Jun_12_09:34-CPL_Jun_12_09:33
1014	# Would be nice to have next line but no way to format ls output (need to ls -l --time-style "+%Y-%m-%dT%H:%M")
1015	# ExeDate = ATM_2009-06-12T09:34+SRF_2009-06-12T09:34+OCE_2009-06-12T09:34+ICE_2009-06-12T09:34+CPL_2009-06-12T09:34
1016	ExeDate=""
1017	NextExeSize="( "
1018	(( i=0 ))
1019	UpdateExe=false
1020	(( ExeSecDateMax = 0 ))
1021	for comp in ${config_ListOfComponents[*]} ; do
1022
1023	IGCM_debug_Print 3 ${comp}
1024
1025	eval ExeNameIn=\${config_Executable_${comp}[0]}
1026	eval ExeNameOut=\${config_Executable_${comp}[1]}
1027	# Only if we really have an executable for the component :
1028	if [ X${ExeNameIn} = X\"\" ] ; then
1029	# If there is no exe file for this component
1030	(( ExeSize=0 ))
1031	else
1032	eval LS_bin=${R_EXE}/${ExeNameIn}
1033	IGCM_sys_FileSize ${LS_bin} ExeSize
1034
1035	set +A LS_comp -- $( LC_TIME=en_US ls -l ${LS_bin} )
1036	if [ X${ExeDate} = X ] ; then
1037	# First component exe date
1038	ExeDate=${comp}_${LS_comp[5]}_${LS_comp[6]}
1039	else
1040	ExeDate=${ExeDate}-${comp}_${LS_comp[5]}_${LS_comp[6]}
1041	fi
1042	ExeDate=${ExeDate}_${LS_comp[7]}
1043	fi
1044
1045	if [ ${i} -eq 0 ] ; then
1046	# First component
1047	NextExeSize="( "${ExeSize}
1048	else
1049	NextExeSize=${NextExeSize}", "${ExeSize}
1050	fi
1051	eval LastCompExeSize=${run_Log_LastExeSize[$i]}
1052	(( i=i+1 ))
1053
1054	if [ ${ExeSize} -ne ${LastCompExeSize} ] ; then
1055	if ( ${FirstInitialize} ) ; then
1056	IGCM_debug_Print 1 "Save first ${ExeNameIn} in ${R_OUT_EXE} !"
1057	else
1058	IGCM_debug_Print 1 "${ExeNameIn} has changed in ${R_EXE} !"
1059	IGCM_debug_Print 1 "Save latest ${ExeNameIn} in ${R_OUT_EXE} !"
1060	eval FileToBeDeleted[${#FileToBeDeleted[@]}]=${ExeNameOut}
1061	fi
1062	eval IGCM_sys_Put_Out ${ExeNameOut} ${R_OUT_EXE}/${PREFIX}_${ExeNameIn} rw
1063	UpdateExe=true
1064
1065	# SD : switch off for now
1066	#IGCM_sys_GetDate_FichWork ${LS_bin} ExeSecDate
1067	#if [ $ExeSecDateMax -lt $ExeSecDate ] ; then
1068	# ExeSecDateMax=$ExeSecDate
1069	#fi
1070	fi
1071	done
1072
1073	# SD : switch off for now
1074	#if ( ${UpdateExe} ) ; then
1075	# echo "Launch SaveSourceModifications."
1076	# IGCM_config_SaveSourceModifications ${ExeSecDateMax}
1077	#fi
1078
1079	NextExeSize=${NextExeSize}" )"
1080	IGCM_card_WriteOption ${SUBMIT_DIR}/run.card Log LastExeSize "${NextExeSize}"
1081
1082	if [ ${DRYRUN} -le 1 ] ; then
1083	tail -1500 ${Exe_Output} > ${Exe_Output}_tail.txt
1084	ExeCpuLog=$( gawk -f ${libIGCM}/libIGCM_sys/IGCM_add_out.awk ${Exe_Output}_tail.txt )
1085	RET=$?
1086	if [ $RET -eq 0 ] ; then
1087	# ExeCpuLog variable contents 5 fields
1088	echo "${CumulPeriod} ${PeriodDateBegin} ${PeriodDateEnd} ${ExeCpuLog} ${ExeDate}" \| \
1089	gawk '{printf("# %11d \| %15s \| %15s \| %19s \| %19s \| %15.5f \| %15.5f \| %15.5f \| %s\n", \
1090	$1,$2,$3,$4,$5,$6,$7,$8,$9)}' >> ${SUBMIT_DIR}/run.card
1091	fi
1092	eval FileToBeDeleted[${#FileToBeDeleted[@]}]="${Exe_Output}_tail.txt"
1093	fi
1094
1095	fi
1096
1097	# All was right ? no ? then we stop.
1098	IGCM_debug_Verif_Exit
1099
1100	# If all was OK, we can delete all files not necessary for next Job
1101	echo
1102	IGCM_debug_Print 1 "Files that will be deleted before next period-run : "
1103
1104	if [ ${DRYRUN} -le 2 ] ; then
1105	for f in ${FileToBeDeleted[@]} ; do [ -f ${f} ] && ls -la $f ; [ -f ${f} ] && rm -f $f ; done
1106	else
1107	echo ${FileToBeDeleted[@]}
1108	fi
1109
1110	#=================================================#
1111	# Modification of libIGCM behaviour #
1112	#=================================================#
1113
1114	# To use this function, one must copy libIGCM.card from ${libIGCM} directory
1115	# and put it in ${SUBMIT_DIR} directory. After modifications of ${SUBMIT_DIR}/libIGCM.card,
1116	# variables define inside [UserChanges] will be modified for next Period of libIGCM main loop.
1117	if [ -f ${SUBMIT_DIR}/libIGCM.card ] ; then
1118	echo
1119	echo "########################################################################"
1120	echo "!!! Modification of libIGCM behaviour !!!"
1121	echo
1122
1123	IGCM_debug_Print 1 "DefineArrayFromOption : libIGCM_UserChanges in libIGCM.card"
1124	IGCM_card_DefineArrayFromSection ${SUBMIT_DIR}/libIGCM.card UserChanges
1125	IGCM_debug_Print 2 "libIGCM_UserChanges" ${libIGCM_UserChanges[*]}
1126
1127	# Special treatments for libIGCM internals
1128	for option in ${libIGCM_UserChanges[*]} ; do
1129	IGCM_card_DefineVariableFromOption ${SUBMIT_DIR}/libIGCM.card UserChanges ${option}
1130
1131	echo "We will change : ${option}."
1132	eval echo "Previous value : " \${${option}}
1133	eval echo "Change to : " \${libIGCM_UserChanges_${option}}
1134
1135	eval ${option}=\${libIGCM_UserChanges_${option}}
1136
1137	case ${option} in
1138	config_UserChoices_DateEnd)
1139	IGCM_debug_PrintVariables 1 config_UserChoices_DateEnd
1140	DateEnd=$( IGCM_date_ConvertFormatToGregorian ${config_UserChoices_DateEnd} )
1141
1142	# Period Length In Days between DateBegin and DateEnd
1143	(( ExperienceLengthInDays=$( IGCM_date_DaysBetweenGregorianDate ${DateEnd} ${DateBegin} ) + 1 ))
1144	if [ ${ExperienceLengthInDays} -lt 0 ] ; then
1145	IGCM_debug_Print 1 "Problem with dates in libIGCM.card : ${DateEnd} < ${DateBegin} ! You must check that."
1146	IGCM_debug_Exit "IGCM_PeriodEnd" " Wrong Dates."
1147	IGCM_debug_Verif_Exit
1148	fi
1149	;;
1150	config_UserChoices_PeriodLength)
1151	IGCM_debug_Print 1 "Change config_UserChoices_PeriodLength=${config_UserChoices_PeriodLength}"
1152	;;
1153	PeriodNb)
1154	IGCM_debug_Print 1 "Loop in main Job with ${PeriodNb} period(s)"
1155	;;
1156	config_Post_RebuildFrequency)
1157	IGCM_debug_Print 1 "Change config_Post_RebuildFrequency=${config_Post_RebuildFrequency} : IGCM_post_Configure"
1158	IGCM_post_Configure
1159	;;
1160	config_Post_TimeSeriesFrequency)
1161	IGCM_debug_Print 1 "Change config_Post_TimeSeriesFrequency = ${config_Post_TimeSeriesFrequency} : IGCM_post_Configure"
1162	IGCM_post_Configure
1163	;;
1164	config_Post_SeasonalFrequency)
1165	IGCM_debug_Print 1 "Change config_Post_SeasonalFrequency = ${config_Post_SeasonalFrequency} : IGCM_post_Configure"
1166	IGCM_post_Configure
1167	;;
1168	esac
1169	done
1170
1171	echo
1172	echo "########################################################################"
1173	echo
1174	fi
1175
1176	#=================================================#
1177	# Determine next computed period #
1178	#=================================================#
1179
1180	PeriodDateBegin=$( IGCM_date_AddDaysToGregorianDate ${PeriodDateEnd} 1 )
1181	IGCM_date_GetYearMonthDay $PeriodDateBegin year month day
1182	year_m1=$(( year - 1 ))
1183	year_p1=$(( year + 1 ))
1184	IGCM_config_DaysInPeriodLength
1185	PeriodDateEnd=$( IGCM_date_AddDaysToGregorianDate ${PeriodDateBegin} $(( ${PeriodLengthInDays} - 1 )) )
1186
1187	# Debug Print :
1188	echo
1189	IGCM_debug_Print 1 "IGCM_config_PeriodEnd : Preparing Next Execution"
1190	IGCM_debug_Print 1 "PeriodDateBegin : ${PeriodDateBegin}"
1191	IGCM_debug_Print 1 "PeriodDateEnd : ${PeriodDateEnd}"
1192	IGCM_debug_Print 1 "PeriodLengthInDays : ${PeriodLengthInDays}"
1193
1194	PeriodDateBegin=$( IGCM_date_ConvertFormatToHuman ${PeriodDateBegin} )
1195	PeriodDateEnd=$( IGCM_date_ConvertFormatToHuman ${PeriodDateEnd} )
1196
1197	(( CumulPeriod = CumulPeriod + 1 ))
1198
1199	# Debug Print :
1200	echo
1201	IGCM_debug_Print 3 "PeriodDateBegin Human : ${PeriodDateBegin}"
1202	IGCM_debug_Print 3 "PeriodDateEnd Human : ${PeriodDateEnd}"
1203	IGCM_debug_Print 3 "CumulPeriod : ${CumulPeriod}"
1204
1205	#=================================================#
1206	# Write updated run.card #
1207	#=================================================#
1208
1209	IGCM_card_WriteOption ${SUBMIT_DIR}/run.card Configuration OldPrefix ${OldPrefix}
1210	IGCM_card_WriteOption ${SUBMIT_DIR}/run.card Configuration PeriodDateBegin ${PeriodDateBegin}
1211	IGCM_card_WriteOption ${SUBMIT_DIR}/run.card Configuration PeriodDateEnd ${PeriodDateEnd}
1212	IGCM_card_WriteOption ${SUBMIT_DIR}/run.card Configuration CumulPeriod ${CumulPeriod}
1213
1214	if ( ${FirstInitialize} ) ; then
1215	# It's no more the first time
1216	FirstInitialize=false
1217	fi
1218
1219	IGCM_debug_PopStack "IGCM_config_PeriodEnd"
1220	}
1221
1222	#===================================
1223	function IGCM_config_Finalize
1224	{
1225	IGCM_debug_PushStack "IGCM_config_Finalize"
1226
1227	echo
1228	IGCM_debug_Print 1 "IGCM_config_Finalize"
1229	echo
1230
1231	if ( $DEBUG_debug ) ; then
1232	# Inform the rabbitMQ queue
1233
1234	# TO BE A FUNCTION BEGIN #
1235
1236	if [ X${ActivateBigBro} = Xtrue ] ; then
1237	# Only cosmetics
1238	decal=0
1239	while [ ${decal} -lt ${IGCM_debug_LenStack} ]; do
1240	printf ' ' >> ${StackFileLocation}/stack
1241	(( decal = decal + 1 ))
1242	done
1243	# RabbitMQ message
1244	code=1100
1245	#
1246	Body=$( echo "{\"code\":\"${code}\",\"simuid\":\"${simuid}\",\"jobid\":\"${jobid}\",\"status\":\"OK\",\"timestamp\":\"$( date +"%Y-%m-%d-%T" )\"}" )
1247	encodedBody=$( echo "${Body}" \| base64 -w 0 )
1248	#
1249	#sendAMQPMsg -h localhost -p 5672 -f ${SUBMIT_DIR}/config.card -b ${encodedBody}
1250	echo sendAMQPMsg -h localhost -p 5672 -b "${Body}" >> ${StackFileLocation}/stack
1251	echo sendAMQPMsg -h localhost -p 5672 -b ${encodedBody} >> /tmp/send.AMQP.${jobid}.history.txt
1252	sendAMQPMsg -h localhost -p 5672 -b ${encodedBody}
1253	status=$?
1254	if [ ${status} -gt 0 ] ; then
1255	IGCM_debug_Print 2 "IGCM_debug_PopStack : command sendAMQPMsg failed error code ${status}"
1256	echo sendAMQPMsg -h localhost -p 5672 -b "${Body}"
1257	exit
1258	fi
1259	fi
1260
1261	# TO BE A FUNCTION END #
1262
1263	fi
1264
1265	if [ ${SimulationLengthInDays} -ge ${ExperienceLengthInDays} ] ; then
1266	#==========================#
1267	# End of entire simulation #
1268	#==========================#
1269
1270	# Mail notification
1271	IGCM_sys_SendMail
1272
1273	#
1274	IGCM_card_WriteOption ${SUBMIT_DIR}/run.card Configuration PeriodState "Completed"
1275	IGCM_debug_Print 1 "Normal End of computation."
1276
1277	if ( $DEBUG_debug ) ; then
1278	# Inform the rabbitMQ queue
1279
1280	# TO BE A FUNCTION BEGIN #
1281
1282	if [ X${ActivateBigBro} = Xtrue ] ; then
1283	# Only cosmetics
1284	decal=0
1285	while [ ${decal} -lt ${IGCM_debug_LenStack} ]; do
1286	printf ' ' >> ${StackFileLocation}/stack
1287	(( decal = decal + 1 ))
1288	done
1289	# RabbitMQ message
1290	code=0100
1291	#
1292	Body=$( echo "{\"code\":\"${code}\",\"simuid\":\"${simuid}\",\"jobid\":\"${jobid}\",\"status\":\"OK\",\"timestamp\":\"$( date +"%Y-%m-%d-%T" )\"}" )
1293	encodedBody=$( echo "${Body}" \| base64 -w 0 )
1294	#
1295	#sendAMQPMsg -h localhost -p 5672 -f ${SUBMIT_DIR}/config.card -b ${encodedBody}
1296	echo sendAMQPMsg -h localhost -p 5672 -b "${Body}" >> ${StackFileLocation}/stack
1297	echo sendAMQPMsg -h localhost -p 5672 -b ${encodedBody} >> /tmp/send.AMQP.${jobid}.history.txt
1298	sendAMQPMsg -h localhost -p 5672 -b ${encodedBody}
1299	status=$?
1300	if [ ${status} -gt 0 ] ; then
1301	IGCM_debug_Print 2 "IGCM_debug_PopStack : command sendAMQPMsg failed error code ${status}"
1302	echo sendAMQPMsg -h localhost -p 5672 -b "${Body}"
1303	exit
1304	fi
1305	fi
1306
1307	# TO BE A FUNCTION END #
1308
1309	echo
1310	IGCM_debug_Print 1 "Your files on ${R_SAVE} :"
1311	IGCM_sys_Tree ${R_SAVE}
1312
1313	IGCM_debug_Print 1 "Your files on ${R_BUFR} :"
1314	IGCM_sys_Tree ${R_BUFR}
1315	fi
1316	else
1317	#=================#
1318	# Submit next job #
1319	#=================#
1320
1321	IGCM_card_WriteOption ${SUBMIT_DIR}/run.card Configuration PeriodState "OnQueue"
1322
1323	# Name of next Ksh Script output :
1324	eval Script_Output="${Script_Output_Prefix}_${config_UserChoices_JobName}.$( printf "%06d" ${CumulPeriod} )"
1325
1326	IGCM_debug_Print 1 "Submit next job"
1327	# SUBMIT NEXT JOB from SUBMIT_DIR and come back in RUN_DIR
1328	IGCM_sys_Cd ${SUBMIT_DIR}
1329	# Keep only the 5 latest ${Script_Output_Prefix}_${config_UserChoices_JobName}
1330	ScriptTot=$( ls ${Script_Output_Prefix}_${config_UserChoices_JobName}.?????? 2>/dev/null \| wc -l )
1331	[ ${ScriptTot} -gt 5 ] && rm -f $( ls ${Script_Output_Prefix}_${config_UserChoices_JobName}.?????? \| head -$(( ${ScriptTot} - 5 )) )
1332	# Submit next job and come back
1333	IGCM_sys_Qsub ${SUBMIT_DIR}/Job_${config_UserChoices_JobName}
1334	IGCM_sys_Cd -
1335	fi
1336
1337	# Supress Non Deleted Boundary files
1338	#if [ ${DRYRUN} -le 2 ] ; then
1339	# IGCM_comp_DelFixeBoundaryFiles
1340	# ls -la
1341	#fi
1342
1343	# Clean ${RUN_DIR}=${RUN_DIR_PATH}/${config_UserChoices_JobName}.${$}
1344	# Only for production run (No clean up in DEV or DEB mode)
1345	# and command sent from .. directory.
1346	IGCM_sys_Cd ..
1347	[ X${JobType} = XRUN ] && IGCM_sys_Rm -rf ${RUN_DIR}
1348
1349	IGCM_debug_PopStack "IGCM_config_Finalize"
1350	}
1351
1352	#===================================

Note: See TracBrowser for help on using the repository browser.

Download in other formats: