source: trunk/libIGCM/libIGCM_sys/libIGCM_sys_platine.ksh @ 263

#!/bin/ksh

#**************************************************************
# Author: Sebastien Denvil, Martial Mancip
# Contact: Martial.Mancip_ipsl.jussieu.fr
# $Date$
# $Author$
# $Revision$
# IPSL (2006)
#  This software is governed by the CeCILL licence see libIGCM/libIGCM_CeCILL.LIC
# History:
# Modification:
#
#**************************************************************

#=========================================================
# The documentation of this file can be automatically generated
# if you use the prefix #D- for comments to be extracted. 
# Extract with command: cat lib* | grep "^#D-" | cut -c "4-"
#=========================================================

#D-#==================================================
#D-LibIGCM_sys for Platine
#D-#==================================================
#D-
#D- This ksh library if a layer under some usefull 
#D-environment variables and shell commands.
#D-All those definitions depend on host particularities.
#D-It manages a stack mechanism and test validity of operations.
#D-All function described bellow must be prefixed by IGCM_sys.

#====================================================
# libIGCM_sys PARAMETERS
#====================================================

#====================================================
# set DEBUG_sys to true to output calls of function
typeset -r DEBUG_sys=${DEBUG_sys:=true}

#====================================================
# Turn in dry run mode ? (sys_Put_Rest, sys_Put_Out, sys_Get)
typeset -r DRYRUN=${DRYRUN:=0}

# YOU MUST COMPILE YOUR EXE FILES FOR DRYRUN MODE !
# -------------------------------------------------------------------------------------
# | DRYRUN=  |  Date computations, | sys_Get    |  Exe    | sys_Put_Out; sys_Put_Rest |
# |          |  Cp/Exe param files |            |  Chmod  |                           |
# |          |      Qsub           |            |         |                           |
# -------------------------------------------------------------------------------------
# |    0     |       yes           |    yes     |  yes    |      yes                  |
# -------------------------------------------------------------------------------------
# |    1     |       yes           |    yes     |  yes    |      no                   |
# -------------------------------------------------------------------------------------
# |    2     |       yes           |    yes     |  no     |      no                   |
# -------------------------------------------------------------------------------------
# |    3     |       yes           |    no      |  no     |      no                   |
# -------------------------------------------------------------------------------------

#=====================================================
# Global Variables :
#=====================================================
# Language : "fr" or "en"
typeset -r MYLANG="fr"

#=====================================================
# Host and user names 
# $hostname ou hostname
typeset  HOST=${HOST:=$( hostname )}
# $username ou whoami
typeset  LOGIN=${LOGIN:=$( whoami )}
# $hostname of the MASTER job
typeset MASTER=platine

#D-
#D-#==================================================
#D-Program used in libIGCM
#D-#==================================================

# rsync with path
typeset -r RSYNC=/usr/bin/rsync
# RSYNC_opt args to rsync
typeset -r RSYNC_opt="-va"
# ie storage filesystem
typeset -r RHOST=platine

#====================================================
# Source Ferret
. /home/cont003/p86ipsl/.atlas_env_platine_ksh

#====================================================
# Specific for ocean additionnal diagnostic
export FER_GO="$FER_GO /home/cont003/p86denv/IGCM_POST_UTIL/JNL /home/cont003/p86denv/GRAF /home/cont003/p86denv/GRAF/GO"
export FER_PALETTE="$FER_PALETTE /home/cont003/p86denv/GRAF/PALET"

#====================================================
# Host specific DIRECTORIES
#====================================================

#====================================================
#- R_EXE   (==> BIN_DIR = ${MODIPSL}/bin )
typeset -r R_EXE="${MODIPSL}/bin"

#====================================================
#- SUBMIT_DIR : submission dir
typeset SUBMIT_DIR=${SUBMIT_DIR:=${PWD}}

#====================================================
#- ARCHIVE
typeset -r ARCHIVE=${DMFDIR}

#====================================================
#- libIGCM_POST
typeset -r libIGCM_POST=${libIGCM}

#====================================================
#- IN
typeset -r R_IN=${R_IN:=/dmnfs/cont003/p86ipsl/IGCM}

#====================================================
#- OUT
typeset -r R_OUT=${ARCHIVE}/IGCM_OUT

#====================================================
#- OUT_SCR (ONLY FOR double copy an scratch)
typeset -r R_OUT_SCR=${SCRATCHDIR}/IGCM_OUT

#====================================================
#- OUT_POST
typeset -r R_OUT_POST=${SCRATCHDIR}/IGCM_OUT

#====================================================
#- RUN_DIR_PATH : Temporary working directory (=> TMP)
typeset RUN_DIR_PATH=${RUN_DIR_PATH:=${SCRATCHDIR}}
if [ $LSB_QUEUE == post ] ; then
    typeset -r RUN_DIR_PATH=${SCRATCHDIR}/TMPDIR_IGCM/tmp$$
    if [ ! -d ${RUN_DIR_PATH} ]; then 
        \mkdir -p ${RUN_DIR_PATH}
        if [ $? -gt 0 ] ; then
            echo "Error in creation of "${RUN_DIR_PATH}
        fi
    fi
fi

#====================================================
#- BIG_DIR : BIG_DIR to store files waiting for rebuild
typeset -r BIG_DIR=${BIG_DIR:=${SCRATCHDIR}/REBUILD}

#====================================================
#- HOST_MPIRUN_COMMAND
typeset -r HOST_MPIRUN_COMMAND=${HOST_MPIRUN_COMMAND:="time srun"}

#====================================================
#- Max number of arguments passed to nco operator or demigration command
UNIX_MAX_LIMIT=360

#D-#==================================================
#D-function IGCM_sys_RshMaster
#D-* Purpose: Just a fake command to wrapp
#D-           IGCM_card call in post-treatment
#D-           Ulam do not see brodie filesystem
#D-           Cesium do not see all mercure filesystem
#D-           That's why we need this hack.
#D-* Examples:
#D-
function IGCM_sys_RshMaster {
    #set -vx
    IGCM_debug_PushStack "IGCM_sys_RshMaster" $@
    /bin/ksh <<-EOF
    export libIGCM=${libIGCM}
    export DEBUG_debug=${DEBUG_debug}
    . ${libIGCM}/libIGCM_debug/libIGCM_debug.ksh
    . ${libIGCM}/libIGCM_card/libIGCM_card.ksh
    ${@}
EOF
    if [ $? -gt 0 ] ; then
        echo "IGCM_sys_RshMaster : erreur."
        IGCM_debug_Exit "IGCM_sys_RshMaster"
    fi
    IGCM_debug_PopStack "IGCM_sys_RshMaster"
}

#D-#==================================================
#D-function IGCM_sys_RshArchive
#D-* Purpose: Archive rsh command
#D-* Examples:
#D-
function IGCM_sys_RshArchive {
    IGCM_debug_PushStack "IGCM_sys_RshArchive" $@
    /bin/ksh <<-EOF
    ${@}
EOF
    if [ $? -gt 0 ] ; then
        echo "IGCM_sys_RshArchive : erreur."
        IGCM_debug_Exit "IGCM_sys_RshArchive"
    fi
    IGCM_debug_PopStack "IGCM_sys_RshArchive"
}

#D-#==================================================
#D-function IGCM_sys_RshPost
#D-* Purpose: Post-process rsh command
#D-* Examples:
#D-
function IGCM_sys_RshPost {
    IGCM_debug_PushStack "IGCM_sys_RshPost" $@
    if ( $DEBUG_sys ) ; then
        echo "IGCM_sys_RshPost :" $@
    fi
    /bin/ksh ${@}
    if [ $? -gt 0 ] ; then
        echo "IGCM_sys_RshPost : erreur."
        IGCM_debug_Exit "IGCM_sys_RshPost"
    fi
    IGCM_debug_PopStack "IGCM_sys_RshPost"
}

#D-#==================================================
#D-function IGCM_sys_SendMail
#D-* Purpose: Send mail when simulation is over
#D-* Examples:
#D-
function IGCM_sys_SendMail {
    IGCM_debug_PushStack "IGCM_sys_SendMailPost" $@
    if ( $DEBUG_sys ) ; then
       echo "IGCM_sys_SendMail :" $@
    fi
    cat  << END_MAIL > job_end.mail
Dear ${LOGIN},

  Simulation ${config_UserChoices_JobName} is finished on supercomputer `hostname`.
  Job started : ${DateBegin}
  Job ended   : ${DateEnd}
  Ouput files are available in ${R_SAVE}
END_MAIL

    if [ ! -z ${config_UserChoices_MailName} ] ; then
        mailx -s "${config_UserChoices_JobName} completed" ${config_UserChoices_MailName} < job_end.mail
    elif [ -f ~/.forward ] ; then
        mailx -s "${config_UserChoices_JobName} completed" $( cat ~/.forward ) < job_end.mail
    fi

    if [ $? -gt 0 ] ; then
        echo "IGCM_sys_SendMail : erreur."
        IGCM_debug_Exit "IGCM_sys_SendMail"
    fi
    IGCM_debug_PopStack "IGCM_sys_SendMail"
}

#D-#==================================================
#D-function IGCM_sys_Mkdir
#D-* Purpose: Master locale mkdir command
#D-* Examples:
#D-
function IGCM_sys_Mkdir {
    IGCM_debug_PushStack "IGCM_sys_Mkdir" $@
    if ( $DEBUG_sys ) ; then
        echo "IGCM_sys_Mkdir :" $@
    fi
    if [ ! -d ${1} ]; then
        \mkdir -p $1
        if [ $? -gt 0 ] ; then
            echo "IGCM_sys_Mkdir : erreur."
            IGCM_debug_Exit "IGCM_sys_Mkdir"
        fi
    fi
    # vérification :
    if [ ! -d ${1} ] ; then
        echo "IGCM_sys_Mkdir : erreur."
        IGCM_debug_Exit "IGCM_sys_Mkdir"
    fi
    IGCM_debug_PopStack "IGCM_sys_Mkdir"
}

#D-#==================================================
#D-function IGCM_sys_MkdirArchive
#D-* Purpose: Mkdir on Archive
#D-* Examples:
#D-
function IGCM_sys_MkdirArchive {
    IGCM_debug_PushStack "IGCM_sys_MkdirArchive" $@
    if ( $DEBUG_sys ) ; then
        echo "IGCM_sys_MkdirArchive :" $@
    fi
    #- creation de repertoire sur le serveur fichier
    if [ ! -d ${1} ]; then 
        \mkdir -p $1
        if [ $? -gt 0 ] ; then
            echo "IGCM_sys_MkdirArchive : erreur."
            IGCM_debug_Exit "IGCM_sys_MkdirArchive"
        fi
    fi
    IGCM_debug_PopStack "IGCM_sys_MkdirArchive"
}

#D-#==================================================
#D-function IGCM_sys_MkdirWork
#D-* Purpose: Mkdir on Work
#D-* Examples:
#D-
function IGCM_sys_MkdirWork {
    IGCM_debug_PushStack "IGCM_sys_MkdirWork" $@
    if ( $DEBUG_sys ) ; then
        echo "IGCM_sys_MkdirWork :" $@
    fi
    #- creation de repertoire sur le serveur fichier
    if [ ! -d ${1} ]; then 
        \mkdir -p $1
        if [ $? -gt 0 ] ; then
            echo "IGCM_sys_MkdirWork : erreur."
            IGCM_debug_Exit "IGCM_sys_MkdirWork"
        fi
    fi
    IGCM_debug_PopStack "IGCM_sys_MkdirWork"
}

#D-#==================================================
#D-function IGCM_sys_Cd
#D-* Purpose: master cd command
#D-* Examples:
#D-
function IGCM_sys_Cd {
    IGCM_debug_PushStack "IGCM_sys_Cd" $@
    if ( $DEBUG_sys ) ; then
        echo "IGCM_sys_Cd :" $@
    fi
    \cd $1
    if [ $? -gt 0 ] ; then
        echo "IGCM_sys_Cd : erreur."
        IGCM_debug_Exit "IGCM_sys_Cd"
    fi
    IGCM_debug_PopStack "IGCM_sys_Cd"
}

#D-#==================================================
#D-function IGCM_sys_Chmod
#D-* Purpose: Chmod
#D-* Examples:
#D-
function IGCM_sys_Chmod {
    IGCM_debug_PushStack "IGCM_sys_Chmod" -- $@
    if ( $DEBUG_sys ) ; then
        echo "IGCM_sys_Chmod :" $@
    fi
    if [ $DRYRUN -le 1 ]; then
        \chmod $@
        if [ $? -gt 0 ] ; then
            echo "IGCM_sys_Chmod : erreur."
            IGCM_debug_Exit "IGCM_sys_Chmod"
        fi
    else
        ( ${DEBUG_debug} ) && echo "DRYRUN mode = " $DRYRUN >> stack
    fi
    IGCM_debug_PopStack "IGCM_sys_Chmod"
}

#D-#==================================================
#D-function IGCM_sys_FileSize
#D-* Purpose: Filesize
#D-* Examples:
#D-
function IGCM_sys_FileSize {
    IGCM_debug_PushStack "IGCM_sys_FileSize" $@

    typeset sizeF
    set +A sizeF -- $( ls -la ${1} )
    if [ $? -gt 0 ] ; then
        IGCM_debug_Exit "IGCM_sys_FileSize"
    fi
    eval ${2}=${sizeF[4]}

    IGCM_debug_PopStack "IGCM_sys_FileSize"
}

#D-#==================================================
#D-function IGCM_sys_TestDir
#D-* Purpose: Test Directory that must exists
#D-* Examples:
#D-
function IGCM_sys_TestDir {
    IGCM_debug_PushStack "IGCM_sys_TestDir" $@
    if ( $DEBUG_sys ) ; then
        echo "IGCM_sys_TestDir :" $@
    fi
    typeset ExistFlag
    ExistFlag=$( [ -d $1 ] && echo 0 || echo 1 )
    IGCM_debug_PopStack "IGCM_sys_TestDir"

    return ${ExistFlag}
}

#D-#==================================================
#D-function IGCM_sys_TestDirArchive
#D-* Purpose: Test Directory that must exists on Archive
#D-* Examples:
#D-
function IGCM_sys_TestDirArchive {
    IGCM_debug_PushStack "IGCM_sys_TestDirArchive" $@
    if ( $DEBUG_sys ) ; then
        echo "IGCM_sys_TestDirArchive :" $@
    fi
    typeset ExistFlag
    ExistFlag=$( [ -d $1 ] && echo 0 || echo 1 )
    IGCM_debug_PopStack "IGCM_sys_TestDirArchive"

    return ${ExistFlag}
}

#D-#==================================================
#D-function IGCM_sys_TestFileArchive
#D-* Purpose: Test file that must NOT EXISTS on Archive
#D-* Examples:
#D-
function IGCM_sys_TestFileArchive {
    IGCM_debug_PushStack "IGCM_sys_TestFileArchive" $@
    typeset ExistFlag
    ExistFlag=$( [ -f $1 ] && echo 0 || echo 1 )
    IGCM_debug_PopStack "IGCM_sys_TestFileArchive"

    return ${ExistFlag}
}

#D-#==================================================
#D-function IGCM_sys_CountFileArchive
#D-* Purpose: Count files on Archive filesystem
#D-* Examples:
#D-
function IGCM_sys_CountFileArchive {
    IGCM_debug_PushStack "IGCM_sys_CountFileArchive" $@
    ls ${@} 2>/dev/null | wc -l
    if [ $? -gt 0 ] ; then
        echo "IGCM_sys_CountFileArchive : erreur."
    fi
    IGCM_debug_PopStack "IGCM_sys_CountFileArchive"
}

#D-#==================================================
#D-function IGCM_sys_Tree
#D-* Purpose: Tree directories with files on ${ARCHIVE}
#D-* Examples: IGCM_sys_Tree ${R_IN} ${R_OUT}
#D-
function IGCM_sys_Tree {
    IGCM_debug_PushStack "IGCM_sys_Tree" $@
    if ( $DEBUG_sys ) ; then
        echo "IGCM_sys_Tree :" $@
    fi

    \tree -f $@

    IGCM_debug_PopStack "IGCM_sys_Tree"
}

#D-#==================================================
#D-function IGCM_sys_Tar
#D-* Purpose: master un-tar command
#D-* Examples:
#D-
function IGCM_sys_Tar {
    IGCM_debug_PushStack "IGCM_sys_Tar" $@
    if ( $DEBUG_sys ) ; then
        echo "IGCM_sys_Tar :" $@
    fi
    \tar cvf $@
    if [ $? -gt 0 ] ; then
        echo "IGCM_sys_Tar : erreur."
        IGCM_debug_Exit "IGCM_sys_Tar"
    fi
    \tar tvf $1

    IGCM_debug_PopStack "IGCM_sys_Tar"
}

#D-#==================================================
#D-function IGCM_sys_UnTar
#D-* Purpose: master un-tar command
#D-* Examples:
#D-
function IGCM_sys_UnTar {
    IGCM_debug_PushStack "IGCM_sys_UnTar" $@
    if ( $DEBUG_sys ) ; then
        echo "IGCM_sys_UnTar :" $@
    fi
    \tar xvf $1
    if [ $? -gt 0 ] ; then
        echo "IGCM_sys_UnTar : erreur."
        IGCM_debug_Exit "IGCM_sys_UnTar"
    fi
    IGCM_debug_PopStack "IGCM_sys_UnTar"
}

#D-#==================================================
#D-function IGCM_sys_Qsub
#D-* Purpose: Qsub new job
#D-* Examples:
#D-
function IGCM_sys_Qsub {
    IGCM_debug_PushStack "IGCM_sys_Qsub" $@
    if ( $DEBUG_sys ) ; then
        echo "IGCM_sys_Qsub :" $@
    fi
    bsub -o ${Script_Output} -J ${config_UserChoices_JobName}.${CumulPeriod} < $1
    if [ $? -gt 0 ] ; then
        echo "IGCM_sys_Qsub : erreur " $@
        IGCM_debug_Exit "IGCM_sys_Qsub"
    fi
    IGCM_debug_PopStack "IGCM_sys_Qsub"
}

#D-#==================================================
#D-function IGCM_sys_QsubPost
#D-* Purpose: Qsub new job on scalaire
#D-* Examples:
#D-
function IGCM_sys_QsubPost {
    IGCM_debug_PushStack "IGCM_sys_QsubPost" $@
    if ( $DEBUG_sys ) ; then
        echo "IGCM_sys_QsubPost :" $@
    fi
    bsub -o ${POST_DIR}/$1.${PeriodDateEnd}.out < ${libIGCM_POST}/$1.job
    if [ $? -gt 0 ] ; then
        echo "IGCM_sys_QsubPost : erreur " $@
        IGCM_debug_Exit "IGCM_sys_QsubPost"
    fi
    IGCM_debug_PopStack "IGCM_sys_QsubPost"
}

#D-*************************
#D- File transfer functions 
#D-*************************
#D-

#D-#==================================================
#D-function IGCM_sys_Rsync_out
#D-* Purpose: treat return val of rsync
#D-* Examples: IGCM_sys_Rsync_out out_RET_rsync
#D-  Error values and explanations can depend on your system version.
function IGCM_sys_Rsync_out {
    RET=$1
    if [ ! $RET ] ; then
        echo "rsync error !"
    fi

    if [ $MYLANG = "fr" ]; then
        case $RET in
            0)  return ;;
            1)  echo "Erreur de rsync ; RERR_SYNTAX : "
                echo "Erreur de syntaxe ou d'utilisation."
                return;;
            2)  echo "Erreur de rsync ; RERR_PROTOCOL : "
                echo "Incompatibilité de protocole."
                return;;
            3)  echo "Erreur de rsync ; RERR_FILESELECT 3"
                echo "Erreurs  lors  de  la  sélection des fichiers d'entrée sortie et"
                echo "répertoires"
                return;;
            4)  echo "Erreur de rsync ; RERR_UNSUPPORTED"
                echo "Action demandée non supportée : une tentative de manipulation de"
                echo "fichiers  64-bits  sur une plate-forme qui ne les supporte pas a"
                echo "été faite ; ou une option qui est supportée par le  client  mais"
                echo "pas par le serveur a été spécifiée."
                return;;
            10) echo "Erreur de rsync ; RERR_SOCKETIO"
                echo "Erreur dans le socket d'entrée sortie"
                return;;
            11) echo "Erreur de rsync ; RERR_FILEIO"
                echo "Erreur d'entrée sortie fichier"
                return;;
            12) echo "Erreur de rsync ; RERR_STREAMIO"
                echo "Erreur dans flux de donnée du protocole rsync"
                return;;
            13) echo "Erreur de rsync ; RERR_MESSAGEIO"
                echo "Erreur avec les diagnostics du programme"
                return;;
            14) echo "Erreur de rsync ; RERR_IPC"
                echo "Erreur dans le code IPC"
                return;;
            20) echo "Erreur de rsync ; RERR_SIGNAL"
                echo "SIGUSR1 ou SIGINT reçu"
                return;;
            21) echo "Erreur de rsync ; RERR_WAITCHILD"
                echo "Une erreur retournée par waitpid()"
                return;;
            22) echo "Erreur de rsync ; RERR_MALLOC"
                echo "Erreur lors de l'allocation des tampons de mémoire de coeur"
                return;;
            23) echo ""
                echo "Erreur fichier inexistant"
                return;;
            30) echo "Erreur de rsync ; RERR_TIMEOUT"
                echo "Temps d'attente écoulé dans l'envoi/réception de données"
                return;;
            *)  echo "Erreur de rsync : code de retour de rsync inconnu :" $RET
                return;;
        esac
    elif [ $MYLANG = "en" ] ; then
        case $RET in
            0)  return;;                
            1)  echo "rsync error : Syntax or usage error "
                return;;
            2)  echo "rsync error : Protocol incompatibility "
                return;;
            3)  echo "rsync error : Errors selecting input/output files, dirs"
                return;;
            4)  echo "rsync error : Requested action not supported: an attempt"
                echo "was made to manipulate 64-bit files on a platform that cannot support"
                echo "them; or an option was specified that is supported by the client and"
                echo "not by the server."
                return;;
            5)  echo "rsync error : Error starting client-server protocol"
                return;;
            10) echo "rsync error : Error in socket I/O "
                return;;
            11) echo "rsync error : Error in file I/O "
                return;;
            12) echo "rsync error : Error in rsync protocol data stream "
                return;;
            13) echo "rsync error : Errors with program diagnostics "
                return;;
            14) echo "rsync error : Error in IPC code "
                return;;
            20) echo "rsync error : Received SIGUSR1 or SIGINT "
                return;;
            21) echo "rsync error : Some error returned by waitpid() "
                return;;
            22) echo "rsync error : Error allocating core memory buffers "
                return;;
            23) echo "rsync error : Partial transfer due to error"
                return;;
            24) echo "rsync error : Partial transfer due to vanished source files"
                return;;
            30) echo "rsync error : Timeout in data send/receive "
                return;;
            *)  echo "rsync error : return code of rsync unknown :" $RET
                return;;
        esac
    else
        echo "unknown language $MYLANG."
        return
    fi
}
    
#D-#==================================================
#D-function IGCM_sys_Cp
#D-* Purpose: generic cp
#D-* Examples:
#D-
function IGCM_sys_Cp {
    IGCM_debug_PushStack "IGCM_sys_Cp" $@
    if ( $DEBUG_sys ) ; then
        echo "IGCM_sys_Cp :" $@
    fi

    typeset RET

    echo cp $@ > out_rsync 2>&1
    \cp $@ >> out_rsync 2>&1
    RET=$?

    if [ ${RET} -gt 0 ] ; then
        echo "IGCM_sys_Cp : error."
        cat out_rsync
        IGCM_debug_Exit "IGCM_sys_Cp"
    fi
    IGCM_debug_PopStack "IGCM_sys_Cp"
}

#D-#==================================================
#D-function IGCM_sys_Rm
#D-* Purpose: generic rm
#D-* Examples:
#D-
function IGCM_sys_Rm {
    IGCM_debug_PushStack "IGCM_sys_Rm" -- $@
    if ( $DEBUG_sys ) ; then
        echo "IGCM_sys_Rm :" $@
    fi

    typeset RET

    echo rm $@ > out_rsync 2>&1
    \rm $@ >> out_rsync 2>&1
    RET=$?

    if [ ${RET} -gt 0 ] ; then
        echo "IGCM_sys_Rm : error."
        cat out_rsync
        IGCM_debug_Exit "IGCM_sys_Rm"
    fi
    IGCM_debug_PopStack "IGCM_sys_Rm"
}

#D-#==================================================
#D-function IGCM_sys_RmRunDir
#D-* Purpose: rm tmpdir (dummy function most of the time batch
#D-                      scheduler will do the job)
#D-* Examples:
#D-
function IGCM_sys_RmRunDir {
    IGCM_debug_PushStack "IGCM_sys_RmRunDir" -- $@
    if ( $DEBUG_sys ) ; then
        echo "IGCM_sys_RmRunDir :" $@
        echo "Dummy call, let the scheduler do that."
    fi
    IGCM_debug_PopStack "IGCM_sys_RmRunDir"
}

#D-#==================================================
#D-function IGCM_sys_Mv
#D-* Purpose: generic move
#D-* Examples:
#D-
function IGCM_sys_Mv {
    IGCM_debug_PushStack "IGCM_sys_Mv" $@
    if ( $DEBUG_sys ) ; then
        echo "IGCM_sys_Mv :" $@
    fi

    if [ $DRYRUN = 0 ]; then

        typeset RET
            
        echo mv $@ > out_rsync 2>&1
        \mv $@ >> out_rsync 2>&1
        RET=$?
    
        if [ ${RET} -gt 0 ] ; then
            echo "IGCM_sys_Mv : error in mv."
            cat out_rsync
            IGCM_debug_Exit "IGCM_sys_Mv"
        fi
    else
        ( ${DEBUG_debug} ) && echo "DRYRUN mode = " $DRYRUN >> stack
    fi

    IGCM_debug_PopStack "IGCM_sys_Mv"
}

#D-#==================================================
#D-function IGCM_sys_Put_Dir
#D-* Purpose: Copy a complete directory on $(ARCHIVE)
#D-* Examples:
#D-
function IGCM_sys_Put_Dir {
    IGCM_debug_PushStack "IGCM_sys_Put_Dir" $@
    if ( $DEBUG_sys ) ; then
        echo "IGCM_sys_Put_Dir :" $@
    fi
    if [ $DRYRUN = 0 ]; then
        if [ ! -d ${1} ] ; then
            echo "WARNING : IGCM_sys_Put_Dir ${1} DOES NOT EXIST ."
            IGCM_debug_PopStack "IGCM_sys_Put_Dir"
            return
        fi

        typeset RET

        # Only if we use rsync
        #IGCM_sys_TestDirArchive $( dirname $2 )
        #
        #USUAL WAY
        \cp -r $1 $2 > out_rsync 2>&1
        RET=$?

        if [ ${RET} -gt 0 ] ; then
            echo "IGCM_sys_Put_Dir : error."
            cat out_rsync
            IGCM_debug_Exit "IGCM_sys_Put_Dir"
        fi
    else
        ( ${DEBUG_debug} ) && echo "DRYRUN mode = " $DRYRUN >> stack
    fi
    IGCM_debug_PopStack "IGCM_sys_Put_Dir"
}

#D-#==================================================
#D-function IGCM_sys_Get_Dir
#D-* Purpose: Copy a complete directory from $(ARCHIVE)
#D-* Examples:
#D-
function IGCM_sys_Get_Dir {
    IGCM_debug_PushStack "IGCM_sys_Get_Dir" $@
    if ( $DEBUG_sys ) ; then
        echo "IGCM_sys_Get_Dir :" $@
    fi
    if [ $DRYRUN = 0 ]; then
#       if [ ! -d ${1} ] ; then
#           echo "WARNING : IGCM_sys_Get_Dir ${1} DOES NOT EXIST ."
#           IGCM_debug_PopStack "IGCM_sys_Get_Dir"
#           return
#       fi

        typeset RET

        # Only if we use rsync
        #IGCM_sys_TestDirArchive $( dirname $2 )
        #
        #USUAL WAY
        \cp -r $1 $2 > out_rsync 2>&1
        RET=$?

        if [ ${RET} -gt 0 ] ; then
            echo "IGCM_sys_Get_Dir : error."
            cat out_rsync
            IGCM_debug_Exit "IGCM_sys_Get_Dir"
        fi
    else
        ( ${DEBUG_debug} ) && echo "DRYRUN mode = " $DRYRUN >> stack
    fi
    IGCM_debug_PopStack "IGCM_sys_Get_Dir"
}

#D-#==================================================
#D-function IGCM_sys_Get_Master
#D-* Purpose: Copy a complete directory from MASTER filesystem
#D-* Examples:
#D-
function IGCM_sys_Get_Master {
    IGCM_debug_PushStack "IGCM_sys_Get_Master" $@
    if ( $DEBUG_sys ) ; then
        echo "IGCM_sys_Get_Master :" $@
    fi
    if [ $DRYRUN = 0 ]; then
        if [ ! -d ${1} ] ; then
            echo "WARNING : IGCM_sys_Get_Master ${1} DOES NOT EXIST ."
            IGCM_debug_PopStack "IGCM_sys_Get_Master"
            return
        fi

        typeset RET
        sleep 60

        #USUAL WAY
        \cp -r $1 $2 > out_rsync 2>&1
        RET=$?

        if [ ${RET} -gt 0 ] ; then
            echo "IGCM_sys_Get_Master : error."
            cat out_rsync
            IGCM_debug_Exit "IGCM_sys_Get_Master"
        fi
    else
        ( ${DEBUG_debug} ) && echo "DRYRUN mode = " $DRYRUN >> stack
    fi
    IGCM_debug_PopStack "IGCM_sys_Get_Master"
}

#D-#==================================================
#D-function IGCM_sys_Put_Rest
#D-* Purpose: Put computied restarts on $(ARCHIVE).
#D-           File and target directory must exist.
#D-* Examples:
#D-
function IGCM_sys_Put_Rest {
    IGCM_debug_PushStack "IGCM_sys_Put_Rest" $@
    if ( $DEBUG_sys ) ; then
        echo "IGCM_sys_Put_Rest :" $@
    fi
    if [ $DRYRUN = 0 ]; then
        if [ ! -f ${1} ] ; then
            echo "ERROR : IGCM_sys_Put_Rest ${1} DOES NOT EXIST ."
            IGCM_debug_Exit "IGCM_sys_Put_Rest"
        fi

        typeset RET
        #
        if [ X${JobType} = XRUN ] ; then
            IGCM_sys_Chmod 444 ${1}
        fi
        #
        IGCM_sys_TestDirArchive $( dirname $2 )
        #
        # USUAL WAY
        putfer $1 $2 > out_rsync 2>&1
        RET=$?

#       #RSYNC WITH NETWORK RSH CALL
#       echo ${RSYNC} ${RSYNC_opt} -e ssh ${RUN_DIR}/$1 ${RHOST}:${2} > out_rsync 2>&1
#       ${RSYNC} ${RSYNC_opt} -e ssh ${RUN_DIR}/$1 ${RHOST}:${2} >> out_rsync 2>&1

#       #RSYNC WITH NFS USE
#       echo ${RSYNC} ${RSYNC_opt} ${RUN_DIR}/$1 ${2} > out_rsync 2>&1
#       ${RSYNC} ${RSYNC_opt} ${RUN_DIR}/$1 ${2} >> out_rsync 2>&1

#       RET=$?
#       IGCM_sys_Rsync_out $RET

#       ${libIGCM}/libIGCM_sys/IGCM_analyse_rsync_out.awk out_rsync
#       (( RET=RET+$? ))

        if [ ${RET} -gt 0 ] ; then
            echo "IGCM_sys_Put_Rest : error."
            cat out_rsync
            IGCM_debug_Exit "IGCM_sys_Put_Rest"
        fi
    else
        ( ${DEBUG_debug} ) && echo "DRYRUN mode = " $DRYRUN >> stack
    fi
    IGCM_debug_PopStack "IGCM_sys_Put_Rest"
}

#D-#==================================================
#D-function IGCM_sys_Put_Out
#D-* Purpose: Copy a file on $(ARCHIVE) after have chmod it in readonly
#D-* Examples:
#D-
function IGCM_sys_Put_Out {
    IGCM_debug_PushStack "IGCM_sys_Put_Out" $@
    if ( $DEBUG_sys ) ; then
        echo "IGCM_sys_Put_Out :" $@
    fi
    if [ $DRYRUN = 0 ]; then
        if [ ! -f ${1} ] ; then
            echo "WARNING : IGCM_sys_Put_Out ${1} DOES NOT EXIST ."
            IGCM_debug_PopStack "IGCM_sys_Put_Out"
            return 1
        fi
        #
        IGCM_sys_MkdirArchive $( dirname $2 )
        #
        typeset RET
        #
        if [ X${JobType} = XRUN ] ; then
            if [ X${3} = X ] ; then
                IGCM_sys_Chmod 444 ${1}
            fi
        fi
        #
        # USUAL WAY
        putfer $1 $2 > out_rsync 2>&1
        RET=$?

#       #RSYNC WITH NETWORK RSH CALL
#       echo ${RSYNC} ${RSYNC_opt} -e ssh ${RUN_DIR}/$1 ${RHOST}:${2} > out_rsync 2>&1
#       ${RSYNC} ${RSYNC_opt} -e ssh ${RUN_DIR}/$1 ${RHOST}:${2} >> out_rsync 2>&1

#       #RSYNC WITH NFS USE
#       echo ${RSYNC} ${RSYNC_opt} ${RUN_DIR}/$1 ${2} > out_rsync 2>&1
#       ${RSYNC} ${RSYNC_opt} ${RUN_DIR}/$1 ${2} >> out_rsync 2>&1

#       RET=$?
#       IGCM_sys_Rsync_out $RET

#       ${libIGCM}/libIGCM_sys/IGCM_analyse_rsync_out.awk out_rsync
#       (( RET=RET+$? ))

        if [ ${RET} -gt 0 ] ; then
            echo "IGCM_sys_Put_Out : error."
            cat out_rsync
            IGCM_debug_Exit "IGCM_sys_Put_Out"
        fi
    else
        ( ${DEBUG_debug} ) && echo "DRYRUN mode = " $DRYRUN >> stack
    fi
    IGCM_debug_PopStack "IGCM_sys_Put_Out"
    return 0
}

#D-#==================================================
#D-function IGCM_sys_Get
#D-* Purpose: Get a file from ${ARCHIVE}
#D-* Examples: IGCM_sys_Get myfile /destpath/myfile_with_PREFIX
#D-            IGCM_sys_Get /l Array_contain_myfiles /destpath/
function IGCM_sys_Get {
    IGCM_debug_PushStack "IGCM_sys_Get" $@

    typeset DEST RET dm_liste ifile target file_work 

    if ( $DEBUG_sys ) ; then
        echo "IGCM_sys_Get :" $@
    fi
    if [ $DRYRUN -le 2 ]; then
        if [ X${1} = X'/l' ] ; then
            # test if the first file is present in the old computation :
            eval set +A dm_liste \${${2}}
        else
            eval set +A dm_liste ${1}
        fi
        eval DEST=\${${#}}

        #=====================================================
        #         COMMENT OUT DOUBLE COPY ON SCRATCHDIR
        #=====================================================

        # Is it an R_OUT file (not R_IN) ?
        #echo ${dm_liste[0]} | grep "${R_OUT}" > /dev/null 2>&1
        #if [ $? -eq 0 ] ; then
        #    # Yes  ? then we try to get it in SCRATCHDIR
        #    set +A file_work $( echo ${dm_liste[*]} | sed -e "s|${R_OUT}|${R_OUT_SCR}|g" )
        #    if [ -f ${file_work[0]} ] ; then
        #       IGCM_sys_Cp ${file_work[*]} ${DEST}
        #       IGCM_debug_PopStack "IGCM_sys_Get"
        #       return
        #    fi
        #fi

        # test if the (first) file is present in the old computation :
        IGCM_sys_TestFileArchive ${dm_liste[0]}
        RET=$?
        if [ ${RET} -gt 0 ] ; then
            echo "IGCM_sys_Get, ERROR : regular file ${dm_liste[0]} DOES NOT EXIST ."
            IGCM_debug_Exit "IGCM_sys_Get"
            #IGCM_debug_PopStack "IGCM_sys_Get"
            #return
        fi

#       dmget ${dm_liste[*]} > out_rsync 2>&1
#       RET=$?
#       if [ ${RET} -gt 0 ] ; then
#           echo "IGCM_sys_Get : demigration error."
#           cat out_rsync
#           IGCM_debug_Exit "IGCM_sys_Get"
#           IGCM_debug_PopStack "IGCM_sys_Get"
#           return
#       fi

        #USUAL WAY
        (( RET=0 ))
        if [ X${1} = X'/l' ] ; then
            (( RET=0 ))
            for target in ${dm_liste[*]} ; do
                local_file=$( basename ${target} )
                \cp ${target} ${DEST}/${local_file} >> out_rsync 2>&1
                (( RET = RET + $? ))
            done
        else
            \cp ${dm_liste} ${DEST} >> out_rsync 2>&1
            RET=$?
        fi

#       #RSYNC WITH NETWORK RSH CALL
#       echo ${RSYNC} ${RSYNC_opt} -e ssh ${RHOST}:"${dm_liste}" ${RHOST}:${RUN_DIR}/${DEST} > out_rsync 2>&1
#       ${RSYNC} ${RSYNC_opt} -e ssh ${RHOST}:"${dm_liste}" ${RHOST}:${RUN_DIR}/${DEST} >> out_rsync 2>&1

#       #RSYNC WITH NFS USE
#       echo ${RSYNC} ${RSYNC_opt} ${dm_liste} ${RUN_DIR}/${DEST} > out_rsync 2>&1
#       ${RSYNC} ${RSYNC_opt} ${dm_liste} ${RUN_DIR}/${DEST} >> out_rsync 2>&1

#       RET=$?
#       IGCM_sys_Rsync_out $RET

#       ${libIGCM}/libIGCM_sys/IGCM_analyse_rsync_out.awk out_rsync
#       (( RET=RET+$? ))

        if [ ${RET} -gt 0 ] ; then
            echo "IGCM_sys_Get : copy error."
            cat out_rsync
            IGCM_debug_Exit "IGCM_sys_Get"
        fi
    else
        ( ${DEBUG_debug} ) && echo "DRYRUN mode = " $DRYRUN >> stack
    fi
    IGCM_debug_PopStack "IGCM_sys_Get"
}

#D-#==================================================
#D-function IGCM_sys_Put_Dods
#D-* Purpose: Put $(ARCHIVE) files on DODS internet protocole.
#D-* Examples:
#D-
function IGCM_sys_Put_Dods {
    IGCM_debug_PushStack "IGCM_sys_Put_Dods" $@
    if ( $DEBUG_sys ) ; then
        echo "IGCM_sys_Put_Dods :" $@
    fi
    if [ $DRYRUN = 0 ]; then
        if [ ! -d ${R_SAVE}/${1} ] ; then
            echo "WARNING : IGCM_sys_Put_Dods ${R_SAVE}/${1} DOES NOT EXIST ."
            IGCM_debug_PopStack "IGCM_sys_Put_Dods"
            return
        fi

        typeset RET
        #
        cd ${R_SAVE}
        dods_rm public/${LOGIN}/${R_DODS}/${1} > /dev/null 2>&1
        dods_cp ${1} public/${LOGIN}/${R_DODS} > /dev/null 2>&1
        RET=0

        if [ ${RET} -gt 0 ] ; then
            echo "IGCM_sys_Put_Dods : error."
            IGCM_debug_Exit "IGCM_sys_Put_Dods"
        fi
    else
        ( ${DEBUG_debug} ) && echo "DRYRUN mode = " $DRYRUN >> stack
    fi
    IGCM_debug_PopStack "IGCM_sys_Put_Dods"
}

############################################################## A FINIR !!

#D-#==================================================
#D-function IGCM_sys_GetDate_FichWork
#D-* Purpose: donne la date filesys d'un fichier sur le filesystem WORK
#D-* Examples:
#D-
function IGCM_sys_GetDate_FichWork {
    IGCM_debug_PushStack "IGCM_sys_FichWork" $@
    if ( $DEBUG_sys ) ; then
        echo "IGCM_sys_GetDate_FichWork :" $@
    fi
    # donne la date filesys d'un fichier sur la machine work
    IGCM_debug_PopStack "IGCM_sys_FichWork"
}

#D-#==================================================
#D-function IGCM_sys_GetDate_FichArchive
#D-* Purpose: donne la date filesys d'un fichier sur le filesystem ARCHIVE 
#D-* Examples:
#D-
function IGCM_sys_GetDate_FichArchive {
    IGCM_debug_PushStack "IGCM_sys_FichArchive" $@
    if ( $DEBUG_sys ) ; then
        echo "IGCM_sys_GetDate_FichArchive :" $@
    fi
    IGCM_debug_PopStack "IGCM_sys_FichArchive"
}

##############################################################
# NCO OPERATOR

function IGCM_sys_ncap {
    IGCM_debug_PushStack "IGCM_sys_ncap" -- $@
    if ( $DEBUG_sys ) ; then
        echo "IGCM_sys_ncap :" $@
    fi
    /applications/nco/bin/ncap $@
    if [ $? -gt 0 ] ; then
       echo "IGCM_sys_ncap : erreur ${@}."
#       IGCM_debug_Exit "ncap"
    fi

    IGCM_debug_PopStack "IGCM_sys_ncap"
}

ncatted=/applications/nco/bin/ncatted
# Problem with ksh and string passed in this function to ncatted !
# function IGCM_sys_ncatted {
#     IGCM_debug_PushStack "IGCM_sys_ncatted" -- $@
#     if ( $DEBUG_sys ) ; then
#       echo "IGCM_sys_ncatted :" $@
#     fi
#     /usr/local/bin/ncatted $@
#     if [ $? -gt 0 ] ; then
#        echo "IGCM_sys_ncatted : erreur ${@}."
#        IGCM_debug_Exit "ncatted"
#     fi

#     IGCM_debug_PopStack "IGCM_sys_ncatted"
# }

function IGCM_sys_ncbo {
    IGCM_debug_PushStack "IGCM_sys_ncbo" -- $@
    if ( $DEBUG_sys ) ; then
        echo "IGCM_sys_ncbo :" $@
    fi
    /applications/nco/bin/ncbo $@
    if [ $? -gt 0 ] ; then
       echo "IGCM_sys_ncbo : erreur ${@}."
#       IGCM_debug_Exit "ncbo"
    fi

    IGCM_debug_PopStack "IGCM_sys_ncbo"
}

function IGCM_sys_ncdiff {
    IGCM_debug_PushStack "IGCM_sys_ncdiff" -- $@
    if ( $DEBUG_sys ) ; then
        echo "IGCM_sys_ncdiff :" $@
    fi
    /applications/nco/bin/ncdiff $@
    if [ $? -gt 0 ] ; then
       echo "IGCM_sys_ncdiff : erreur ${@}."
#       IGCM_debug_Exit "ncdiff"
    fi

    IGCM_debug_PopStack "IGCM_sys_ncdiff"
}

function IGCM_sys_ncea {
    IGCM_debug_PushStack "IGCM_sys_ncea" -- $@
    if ( $DEBUG_sys ) ; then
        echo "IGCM_sys_ncea :" $@
    fi
    /applications/nco/bin/ncea $@
    if [ $? -gt 0 ] ; then
       echo "IGCM_sys_ncea : erreur ${@}."
#       IGCM_debug_Exit "ncea"
    fi

    IGCM_debug_PopStack "IGCM_sys_ncea"
}

function IGCM_sys_ncecat {
    IGCM_debug_PushStack "IGCM_sys_ncecat" -- $@
    if ( $DEBUG_sys ) ; then
        echo "IGCM_sys_ncecat :" $@
    fi
    /applications/nco/bin/ncecat $@
    if [ $? -gt 0 ] ; then
       echo "IGCM_sys_ncecat : erreur ${@}."
#       IGCM_debug_Exit "ncecat"
    fi

    IGCM_debug_PopStack "IGCM_sys_ncecat"
}

function IGCM_sys_ncflint {
    IGCM_debug_PushStack "IGCM_sys_ncflint" -- $@
    if ( $DEBUG_sys ) ; then
        echo "IGCM_sys_ncflint :" $@
    fi
    /usr/local/bin/ncflint $@
    if [ $? -gt 0 ] ; then
       echo "IGCM_sys_ncflint : erreur ${@}."
#       IGCM_debug_Exit "ncflint"
    fi

    IGCM_debug_PopStack "IGCM_sys_ncflint"
}

function IGCM_sys_ncks {
    IGCM_debug_PushStack "IGCM_sys_ncks" -- $@
    if ( $DEBUG_sys ) ; then
        echo "IGCM_sys_ncks :" $@
    fi
    /applications/nco/bin/ncks $@
    if [ $? -gt 0 ] ; then
       echo "IGCM_sys_ncks : erreur ${@}."
#       IGCM_debug_Exit "ncks"
    fi

    IGCM_debug_PopStack "IGCM_sys_ncks"
}

function IGCM_sys_ncpdq {
    IGCM_debug_PushStack "IGCM_sys_ncpdq" -- $@
    if ( $DEBUG_sys ) ; then
        echo "IGCM_sys_ncpdq :" $@
    fi
    /applications/nco/bin/ncpdq $@
    if [ $? -gt 0 ] ; then
       echo "IGCM_sys_ncpdq : erreur ${@}."
#       IGCM_debug_Exit "ncpdq"
    fi

    IGCM_debug_PopStack "IGCM_sys_ncpdq"
}

function IGCM_sys_ncra {
    IGCM_debug_PushStack "IGCM_sys_ncra" -- $@
    if ( $DEBUG_sys ) ; then
        echo "IGCM_sys_ncra :" $@
    fi
    /applications/nco/bin/ncra $@
    if [ $? -gt 0 ] ; then
       echo "IGCM_sys_ncra : erreur ${@}."
#       IGCM_debug_Exit "ncra"
    fi

    IGCM_debug_PopStack "IGCM_sys_ncra"
}

function IGCM_sys_ncrcat {
    IGCM_debug_PushStack "IGCM_sys_ncrcat" -- $@
    if ( $DEBUG_sys ) ; then
        echo "IGCM_sys_ncrcat :" $@
    fi
    /applications/nco/bin/ncrcat $@
    if [ $? -gt 0 ] ; then
       echo "IGCM_sys_ncrcat : erreur ${@}."
#       IGCM_debug_Exit "ncrcat"
    fi

    IGCM_debug_PopStack "IGCM_sys_ncrcat"
}

function IGCM_sys_ncrename {
    IGCM_debug_PushStack "IGCM_sys_ncrename" -- $@
    if ( $DEBUG_sys ) ; then
        echo "IGCM_sys_ncrename :" $@
    fi
    /applications/nco/bin/ncrename $@
    if [ $? -gt 0 ] ; then
       echo "IGCM_sys_ncrename : erreur ${@}."
#       IGCM_debug_Exit "ncrename"
    fi

    IGCM_debug_PopStack "IGCM_sys_ncrename"
}

function IGCM_sys_ncwa {
    IGCM_debug_PushStack "IGCM_sys_ncwa" -- $@
    if ( $DEBUG_sys ) ; then
        echo "IGCM_sys_ncwa :" $@
    fi
    /applications/nco/bin/ncwa $@
    if [ $? -gt 0 ] ; then
       echo "IGCM_sys_ncwa : erreur ${@}."
#       IGCM_debug_Exit "ncwa"
    fi

    IGCM_debug_PopStack "IGCM_sys_ncwa"
}

##############################################################
# REBUILD OPERATOR

function IGCM_sys_rebuild {
    IGCM_debug_PushStack "IGCM_sys_rebuild" -- $@
    if ( $DEBUG_sys ) ; then
        echo "IGCM_sys_rebuild :" $@
    fi
    /home/cont003/p86ipsl/IA64/bin/rebuild -f -o $@
    if [ $? -gt 0 ] ; then
       echo "IGCM_sys_rebuild : erreur ${@}."
       IGCM_debug_Exit "rebuild"
    fi

    IGCM_debug_PopStack "IGCM_sys_rebuild"
}

############################################################
# Activate Running Environnment Variables

function IGCM_sys_activ_variables {
    IGCM_debug_PushStack "IGCM_sys_activ_variables"
    if ( $DEBUG_sys ) ; then
        echo "IGCM_sys_activ_variables"
    fi
    ulimit -s 2097152
    IGCM_debug_PopStack "IGCM_sys_activ_variables"
}

############################################################
# Desactivate Running Environnment Variables

function IGCM_sys_desactiv_variables {
    IGCM_debug_PushStack "IGCM_sys_desactiv_variables"
    if ( $DEBUG_sys ) ; then
        echo "IGCM_sys_desactiv_variables"
    fi
    IGCM_debug_PopStack "IGCM_sys_desactiv_variables"
}

############################################################
# Build run file

function IGCM_sys_build_run_file {
    IGCM_debug_PushStack "IGCM_sys_build_run_file" $@
    if ( $DEBUG_sys ) ; then
        echo "IGCM_sys_build_run_file " $@
    fi
    NUM_PROC_OCE=1
    (( NUM_PROC_ATM = $BATCH_NUM_PROC_TOT - NUM_PROC_OCE - 1))
    (( nb_tot_m1    = $BATCH_NUM_PROC_TOT - NUM_PROC_OCE ))
    if [ $1 = MPI1 ]; then
        cat <<EOF > run_file
#!/bin/bash
if [ \$SLURM_PROCID -eq 0 ]
  then ./oasis ;
elif ( [ \$SLURM_PROCID -ge 1 ] && [ \$SLURM_PROCID -lt ${nb_tot_m1} ] )
  then ./lmdz.x ;
else ./opa.xx ;
fi
EOF
        config_UserChoices_JobRunOptions='"-n ${BATCH_NUM_PROC_TOT}"'
        IGCM_sys_Chmod u+x run_file
    fi
    IGCM_debug_PopStack "IGCM_sys_build_run_file"
  
}