source: trunk/libIGCM/libIGCM_sys/libIGCM_sys_ulam.ksh @ 134

Last change on this file since 134 was 134, checked in by sdipsl, 15 years ago
  • Do not use absolute path with monitoring01 as input_directory when producing files and images
  • More verbosity in monitoring.job
  • Bypass strange rcommand behaviour with a sleep for ulam
File size: 34.4 KB
Line 
1#!/bin/ksh
2
3#**************************************************************
4# Author: Sebastien Denvil
5# Contact: sebastien.denvil.@ipsl.jussieu.fr
6# $Date: 2008-12-15 16:00:58 +0100 (Mon, 15 Dec 2008) $
7# $Author: sdipsl $
8# $Revision: 44 $
9# IPSL (2006)
10#  This software is governed by the CeCILL licence see libIGCM/libIGCM_CeCILL.LIC
11# History:
12# Modification:
13#
14#**************************************************************
15
16#=========================================================
17# The documentation of this file can be automatically generated
18# if you use the prefix #D- for comments to be extracted.
19# Extract with command: cat lib* | grep "^#D-" | cut -c "4-"
20#=========================================================
21
22#D-#==================================================
23#D-LibIGCM_sys for Ulam
24#D-#==================================================
25#D-
26#D- This ksh library if a layer under some usefull
27#D-environment variables and shell commands.
28#D-All those definitions depend on host particularities.
29#D-It manages a stack mechanism and test validity of operations.
30#D-All function described bellow must be prefixed by IGCM_sys.
31
32#====================================================
33# libIGCM_sys PARAMETERS
34#====================================================
35
36#====================================================
37# set DEBUG_sys to true to output calls of function
38typeset -r DEBUG_sys=${DEBUG_sys:=true}
39
40#====================================================
41# Turn in dry run mode ? (sys_Put_Rest, sys_Put_Out, sys_Get)
42typeset -r DRYRUN=${DRYRUN:=0}
43
44# YOU MUST COMPILE YOUR EXE FILES FOR DRYRUN MODE !
45# -------------------------------------------------------------------------------------
46# | DRYRUN=  |  Date computations, | sys_Get    |  Exe    | sys_Put_Out; sys_Put_Rest |
47# |          |  Cp/Exe param files |            |  Chmod  |                           |
48# |          |      Qsub           |            |         |                           |
49# -------------------------------------------------------------------------------------
50# |    0     |       yes           |    yes     |  yes    |      yes                  |
51# -------------------------------------------------------------------------------------
52# |    1     |       yes           |    yes     |  yes    |      no                   |
53# -------------------------------------------------------------------------------------
54# |    2     |       yes           |    yes     |  no     |      no                   |
55# -------------------------------------------------------------------------------------
56# |    3     |       yes           |    no      |  no     |      no                   |
57# -------------------------------------------------------------------------------------
58
59#=====================================================
60# Global Variables :
61#=====================================================
62# Language : "fr" or "en"
63typeset -r MYLANG="fr"
64
65#=====================================================
66# Host and user names
67# $hostname ou hostname
68typeset -r HOST=$( hostname )
69# $username ou whoami
70typeset -r LOGIN=$( whoami )
71
72#D-
73#D-#==================================================
74#D-Program used in libIGCM
75#D-#==================================================
76
77# rsync with path
78typeset -r RSYNC=/usr/bin/rsync
79# RSYNC_opt args to rsync
80typeset -r RSYNC_opt="-Lt -v"
81# RSYNC_opt args to "remote rsync"
82# ie storage filesystem
83typeset -r RHOST=gaya.idris.fr
84typeset -r REMOTE_RSYNC=/u/rech/ces/rces452/RSYNC/bin/rsync
85
86#====================================================
87# Source Ferret
88source /home/rech/psl/rpsl035/.atlas_env_ulam_bash
89
90#====================================================
91# Source tools
92#module load netcdf
93#module load nco
94#module load cdo
95
96export PATH=/usr/local/pub/NetCDF/3.6.3/bin:/usr/local/pub/cdo/1.3.0/bin:/usr/local/pub/nco/3.9.6/bin:$PATH
97
98#====================================================
99# Specific for ocean additionnal diagnostic
100#export FER_GO="$FER_GO /home/rech/ces/rces599/Cpl/TKE /home/rech/ces/rces599/Cpl/TKE/GO /home/rech/ces/rces452/IGCM_POST_UTIL/JNL"
101#export FER_PALETTE="$FER_PALETTE /home/rech/ces/rces599/Cpl/TKE/PALET"
102#export DISPLAY=:1
103
104#=========================================================
105# Host specific DIRECTORIES
106#====================================================
107
108#====================================================
109#- R_EXE   (==> BIN_DIR = ${MODIPSL}/bin )
110typeset -r R_EXE="${MODIPSL}/bin"
111
112#====================================================
113#- SUBMIT_DIR : submission dir
114typeset SUBMIT_DIR=${SUBMIT_DIR:=${LOADL_STEP_INITDIR}}
115
116#====================================================
117#- ARCHIVE
118typeset -r ARCHIVE=$HOMEGAYA
119
120#====================================================
121#- IN
122typeset -r R_IN=${R_IN:=/u/rech/psl/rpsl035/IGCM}
123
124#====================================================
125#- OUT
126typeset -r R_OUT=${ARCHIVE}/IGCM_OUT
127
128#====================================================
129#- OUT_POST
130typeset -r R_OUT_POST=${WORKDIR}/IGCM_OUT
131
132#====================================================
133#- RUN_DIR_PATH : Temporary working directory (=> TMP)
134typeset -r RUN_DIR_PATH=${RUN_DIR_PATH:=${TMPDIR}}
135
136#====================================================
137#- Max number of arguments passed to nco operator or demigration command
138UNIX_MAX_LIMIT=12
139
140#D-#==================================================
141#D-function IGCM_sys_RshMaster
142#D-* Purpose: Master rsh command
143#D-* Examples:
144#D-
145function IGCM_sys_RshMaster {
146    #set -vx
147    IGCM_debug_PushStack "IGCM_sys_RshMaster" $@
148    rsh ${MASTER} exec /bin/ksh <<-EOF
149    export libIGCM=${libIGCM_SX}
150    export DEBUG_debug=${DEBUG_debug}
151    . ${libIGCM_SX}/libIGCM_debug/libIGCM_debug.ksh
152    . ${libIGCM_SX}/libIGCM_card/libIGCM_card.ksh
153    ${@}
154EOF
155    if [ $? -gt 0 ] ; then
156        echo "IGCM_sys_RshMaster : erreur."
157        IGCM_debug_Exit "IGCM_sys_RshMaster"
158    fi
159    IGCM_debug_PopStack "IGCM_sys_RshMaster"
160}
161
162#D-#==================================================
163#D-function IGCM_sys_RshArchive
164#D-* Purpose: Archive rsh command
165#D-* Examples:
166#D-
167function IGCM_sys_RshArchive {
168    IGCM_debug_PushStack "IGCM_sys_RshArchive" $@
169    /bin/ksh <<-EOF
170    ${@}
171EOF
172    if [ $? -gt 0 ] ; then
173        echo "IGCM_sys_RshArchive : erreur."
174        IGCM_debug_Exit "IGCM_sys_RshArchive"
175    fi
176    IGCM_debug_PopStack "IGCM_sys_RshArchive"
177}
178
179#D-#==================================================
180#D-function IGCM_sys_RshPost
181#D-* Purpose: Master rsh command
182#D-* Examples:
183#D-
184function IGCM_sys_RshPost {
185    IGCM_debug_PushStack "IGCM_sys_RshPost" $@
186    if ( $DEBUG_sys ) ; then
187        echo "IGCM_sys_RshPost :" $@
188    fi
189    /bin/ksh ${@}
190    if [ $? -gt 0 ] ; then
191        echo "IGCM_sys_RshPost : erreur."
192        IGCM_debug_Exit "IGCM_sys_RshPost"
193    fi
194    IGCM_debug_PopStack "IGCM_sys_RshPost"
195}
196
197#D-#==================================================
198#D-function IGCM_sys_Mkdir
199#D-* Purpose: Master locale mkdir command
200#D-* Examples:
201#D-
202function IGCM_sys_Mkdir {
203    IGCM_debug_PushStack "IGCM_sys_Mkdir" $@
204    if ( $DEBUG_sys ) ; then
205        echo "IGCM_sys_Mkdir :" $@
206    fi
207    if [ ! -d ${1} ]; then
208        \mkdir -p $1
209        if [ $? -gt 0 ] ; then
210            echo "IGCM_sys_Mkdir : erreur."
211            IGCM_debug_Exit "IGCM_sys_Mkdir"
212        fi
213    fi
214    # vérification :
215    if [ ! -d ${1} ] ; then
216        echo "IGCM_sys_Mkdir : erreur."
217        IGCM_debug_Exit "IGCM_sys_Mkdir"
218    fi
219    IGCM_debug_PopStack "IGCM_sys_Mkdir"
220}
221
222#D-#==================================================
223#D-function IGCM_sys_MkdirArchive
224#D-* Purpose: Mkdir on Archive
225#D-* Examples:
226#D-
227function IGCM_sys_MkdirArchive {
228    IGCM_debug_PushStack "IGCM_sys_MkdirArchive" $@
229    if ( $DEBUG_sys ) ; then
230        echo "IGCM_sys_MkdirArchive :" $@
231    fi
232    #- creation de repertoire sur le serveur fichier
233    if [ ! -d ${1} ]; then 
234        \mkdir -p $1
235        if [ $? -gt 0 ] ; then
236            echo "IGCM_sys_MkdirArchive : erreur."
237            IGCM_debug_Exit "IGCM_sys_MkdirArchive"
238        fi
239    fi
240    # vérification ?? :
241    if [ ! -d ${1} ] ; then
242        echo "IGCM_sys_MkdirArchive : erreur."
243        IGCM_debug_Exit "IGCM_sys_MkdirArchive"
244    fi
245    IGCM_debug_PopStack "IGCM_sys_MkdirArchive"
246}
247
248#D-#==================================================
249#D-function IGCM_sys_MkdirWork
250#D-* Purpose: Mkdir on Work
251#D-* Examples:
252#D-
253function IGCM_sys_MkdirWork {
254    IGCM_debug_PushStack "IGCM_sys_MkdirWork" $@
255    if ( $DEBUG_sys ) ; then
256        echo "IGCM_sys_MkdirWork :" $@
257    fi
258    #- creation de repertoire sur le serveur fichier
259    if [ ! -d ${1} ]; then 
260        \mkdir -p $1
261        if [ $? -gt 0 ] ; then
262            echo "IGCM_sys_MkdirWork : erreur."
263            IGCM_debug_Exit "IGCM_sys_MkdirWork"
264        fi
265    fi
266    # vérification ?? :
267    if [ ! -d ${1} ] ; then
268        echo "IGCM_sys_MkdirWork : erreur."
269        IGCM_debug_Exit "IGCM_sys_MkdirWork"
270    fi
271    IGCM_debug_PopStack "IGCM_sys_MkdirWork"
272}
273#IGCM_sys_MkdirWork ${RUN_DIR_PATH}
274#echo "RUN_DIR_PATH ${RUN_DIR_PATH} ok."
275
276#D-#==================================================
277#D-function IGCM_sys_Cd
278#D-* Purpose: master cd command
279#D-* Examples:
280#D-
281function IGCM_sys_Cd {
282    IGCM_debug_PushStack "IGCM_sys_Cd" $@
283    if ( $DEBUG_sys ) ; then
284        echo "IGCM_sys_Cd :" $@
285    fi
286    \cd $1
287    if [ $? -gt 0 ] ; then
288        echo "IGCM_sys_Cd : erreur."
289        IGCM_debug_Exit "IGCM_sys_Cd"
290    fi
291    IGCM_debug_PopStack "IGCM_sys_Cd"
292}
293
294#D-#==================================================
295#D-function IGCM_sys_Chmod
296#D-* Purpose: Chmod
297#D-* Examples:
298#D-
299function IGCM_sys_Chmod {
300    IGCM_debug_PushStack "IGCM_sys_Chmod" $@
301    if ( $DEBUG_sys ) ; then
302        echo "IGCM_sys_Chmod :" $@
303    fi
304    if [ $DRYRUN -le 1 ]; then
305        \chmod $@
306        if [ $? -gt 0 ] ; then
307            echo "IGCM_sys_Chmod : erreur."
308            IGCM_debug_Exit "IGCM_sys_Chmod"
309        fi
310    else
311        ( ${DEBUG_debug} ) && echo "DRYRUN mode = " $DRYRUN >> stack
312    fi
313    IGCM_debug_PopStack "IGCM_sys_Chmod"
314}
315
316#D-#==================================================
317#D-function IGCM_sys_FileSize
318#D-* Purpose: Filesize
319#D-* Examples:
320#D-
321function IGCM_sys_FileSize {
322    IGCM_debug_PushStack "IGCM_sys_FileSize" $@
323
324    typeset sizeF
325    set +A sizeF -- $( ls -la ${1} )
326    if [ $? -gt 0 ] ; then
327        IGCM_debug_Exit "IGCM_sys_FileSize"
328    fi
329    eval ${2}=${sizeF[4]}
330
331    IGCM_debug_PopStack "IGCM_sys_FileSize"
332}
333
334#D-#==================================================
335#D-function IGCM_sys_TestDir
336#D-* Purpose: Test Directory that must exists
337#D-* Examples:
338#D-
339function IGCM_sys_TestDir {
340    IGCM_debug_PushStack "IGCM_sys_TestDir" $@
341    if ( $DEBUG_sys ) ; then
342        echo "IGCM_sys_TestDir :" $@
343    fi
344    typeset ExistFlag
345    ExistFlag=$( [ -d $1 ] && echo 0 || echo 1 )
346    IGCM_debug_PopStack "IGCM_sys_TestDir"
347
348    return ${ExistFlag}
349#    if [ ! -d ${1} ]; then
350#       echo "IGCM_sys_TestDir : Directory $1 does not exist."
351#       IGCM_debug_Exit "IGCM_sys_TestDir"
352#    fi
353}
354
355#D-#==================================================
356#D-function IGCM_sys_TestDirArchive
357#D-* Purpose: Test Directory that must exists on Archive
358#D-* Examples:
359#D-
360function IGCM_sys_TestDirArchive {
361    IGCM_debug_PushStack "IGCM_sys_TestDirArchive" $@
362    if ( $DEBUG_sys ) ; then
363        echo "IGCM_sys_TestDirArchive :" $@
364    fi
365    typeset ExistFlag
366    ExistFlag=$( [ -d $1 ] && echo 0 || echo 1 )
367    IGCM_debug_PopStack "IGCM_sys_TestDirArchive"
368
369    return ${ExistFlag}
370#    if [ ! -d ${1} ]; then
371#       echo "IGCM_sys_TestDirArchive : Directory $1 does not exist on ${ARCHIVE}."
372#       IGCM_debug_Exit "IGCM_sys_TestDirArchive"
373#    fi
374}
375
376#D-#==================================================
377#D-function IGCM_sys_TestFileArchive
378#D-* Purpose: Test file that must NOT EXISTS on Archive
379#D-* Examples:
380#D-
381function IGCM_sys_TestFileArchive {
382    IGCM_debug_PushStack "IGCM_sys_TestFileArchive" $@
383    if ( $DEBUG_sys ) ; then
384        echo "IGCM_sys_TestFileArchive :" $@
385    fi
386    typeset ExistFlag
387    ExistFlag=$( IGCM_sys_RshArchive "[ -f $1 ] && echo 0 || echo 1" )
388    IGCM_debug_PopStack "IGCM_sys_TestFileArchive"
389
390    return ${ExistFlag}
391}
392
393#D-#==================================================
394#D-function IGCM_sys_CountFileArchive
395#D-* Purpose: Count files on Archive filesystem
396#D-* Examples:
397#D-
398function IGCM_sys_CountFileArchive {
399    IGCM_debug_PushStack "IGCM_sys_CountFileArchive" $@
400    IGCM_sys_RshArchive "ls ${@} 2>/dev/null | wc -l"
401    if [ $? -gt 0 ] ; then
402        echo "IGCM_sys_CountFileArchive : erreur."
403    fi
404    IGCM_debug_PopStack "IGCM_sys_CountFileArchive"
405}
406
407#D-#==================================================
408#D-function IGCM_sys_Tree
409#D-* Purpose: Tree directories with files on ${ARCHIVE}
410#D-* Examples: IGCM_sys_Tree ${R_IN} ${R_OUT}
411#D-
412function IGCM_sys_Tree {
413    IGCM_debug_PushStack "IGCM_sys_Tree" $@
414    if ( $DEBUG_sys ) ; then
415        echo "IGCM_sys_Tree :" $@
416    fi
417
418    \mfls -r $@
419
420    IGCM_debug_PopStack "IGCM_sys_Tree"
421}
422
423#D-#==================================================
424#D-function IGCM_sys_Tar
425#D-* Purpose: master un-tar command
426#D-* Examples:
427#D-
428function IGCM_sys_Tar {
429    IGCM_debug_PushStack "IGCM_sys_Tar" $@
430    if ( $DEBUG_sys ) ; then
431        echo "IGCM_sys_Tar :" $@
432    fi
433    \tar cvf $@
434    if [ $? -gt 0 ] ; then
435        echo "IGCM_sys_Tar : erreur."
436        IGCM_debug_Exit "IGCM_sys_Tar"
437    fi
438    \tar tvf $1
439
440    IGCM_debug_PopStack "IGCM_sys_Tar"
441}
442
443#D-#==================================================
444#D-function IGCM_sys_UnTar
445#D-* Purpose: master un-tar command
446#D-* Examples:
447#D-
448function IGCM_sys_UnTar {
449    IGCM_debug_PushStack "IGCM_sys_UnTar" $@
450    if ( $DEBUG_sys ) ; then
451        echo "IGCM_sys_UnTar :" $@
452    fi
453    \tar xvf $1
454    if [ $? -gt 0 ] ; then
455        echo "IGCM_sys_UnTar : erreur."
456        IGCM_debug_Exit "IGCM_sys_UnTar"
457    fi
458    IGCM_debug_PopStack "IGCM_sys_UnTar"
459}
460
461#D-#==================================================
462#D-function IGCM_sys_QsubPost
463#D-* Purpose: Qsub new job on scalaire
464#D-* Examples:
465#D-
466function IGCM_sys_QsubPost {
467    IGCM_debug_PushStack "IGCM_sys_QsubPost" $@
468    if ( $DEBUG_sys ) ; then
469        echo "IGCM_sys_QsubPost :" $@
470    fi
471    cd ${POST_DIR}
472    /opt/ibmll/LoadL/full/bin/llsubmit ${libIGCM}/$1.job
473    cd -
474    if [ $? -gt 0 ] ; then
475        echo "IGCM_sys_QsubPost : erreur."
476        IGCM_debug_Exit "IGCM_sys_QsubPost"
477    fi
478    IGCM_debug_PopStack "IGCM_sys_QsubPost"
479}
480
481#D-*************************
482#D- File transfer functions
483#D-*************************
484#D-
485
486#D-#==================================================
487#D-function IGCM_sys_Rsync_out
488#D-* Purpose: treat return val of rsync
489#D-* Examples: IGCM_sys_Rsync_out out_RET_rsync
490#D-  Error values and explanations can depend on your system version.
491function IGCM_sys_Rsync_out {
492    RET=$1
493    if [ ! $RET ] ; then
494        echo "rsync error !"
495    fi
496
497    if [ $MYLANG = "fr" ]; then
498        case $RET in
499            0)  return ;;
500            1)  echo "Erreur de rsync ; RERR_SYNTAX : "
501                echo "Erreur de syntaxe ou d'utilisation."
502                return;;
503            2)  echo "Erreur de rsync ; RERR_PROTOCOL : "
504                echo "Incompatibilité de protocole."
505                return;;
506            3)  echo "Erreur de rsync ; RERR_FILESELECT 3"
507                echo "Erreurs  lors  de  la  sélection des fichiers d'entrée sortie et"
508                echo "répertoires"
509                return;;
510            4)  echo "Erreur de rsync ; RERR_UNSUPPORTED"
511                echo "Action demandée non supportée : une tentative de manipulation de"
512                echo "fichiers  64-bits  sur une plate-forme qui ne les supporte pas a"
513                echo "été faite ; ou une option qui est supportée par le  client  mais"
514                echo "pas par le serveur a été spécifiée."
515                return;;
516            10) echo "Erreur de rsync ; RERR_SOCKETIO"
517                echo "Erreur dans le socket d'entrée sortie"
518                return;;
519            11) echo "Erreur de rsync ; RERR_FILEIO"
520                echo "Erreur d'entrée sortie fichier"
521                return;;
522            12) echo "Erreur de rsync ; RERR_STREAMIO"
523                echo "Erreur dans flux de donnée du protocole rsync"
524                return;;
525            13) echo "Erreur de rsync ; RERR_MESSAGEIO"
526                echo "Erreur avec les diagnostics du programme"
527                return;;
528            14) echo "Erreur de rsync ; RERR_IPC"
529                echo "Erreur dans le code IPC"
530                return;;
531            20) echo "Erreur de rsync ; RERR_SIGNAL"
532                echo "SIGUSR1 ou SIGINT reçu"
533                return;;
534            21) echo "Erreur de rsync ; RERR_WAITCHILD"
535                echo "Une erreur retournée par waitpid()"
536                return;;
537            22) echo "Erreur de rsync ; RERR_MALLOC"
538                echo "Erreur lors de l'allocation des tampons de mémoire de coeur"
539                return;;
540            23) echo ""
541                echo "Erreur fichier inexistant"
542                return;;
543            30) echo "Erreur de rsync ; RERR_TIMEOUT"
544                echo "Temps d'attente écoulé dans l'envoi/réception de données"
545                return;;
546            *)  echo "Erreur de rsync : code de retour de rsync inconnu :" $RET
547                return;;
548        esac
549    elif [ $MYLANG = "en" ] ; then
550        case $RET in
551            0)  return;;               
552            1)  echo "rsync error : Syntax or usage error "
553                return;;
554            2)  echo "rsync error : Protocol incompatibility "
555                return;;
556            3)  echo "rsync error : Errors selecting input/output files, dirs"
557                return;;
558            4)  echo "rsync error : Requested action not supported: an attempt"
559                echo "was made to manipulate 64-bit files on a platform that cannot support"
560                echo "them; or an option was specified that is supported by the client and"
561                echo "not by the server."
562                return;;
563            5)  echo "rsync error : Error starting client-server protocol"
564                return;;
565            10) echo "rsync error : Error in socket I/O "
566                return;;
567            11) echo "rsync error : Error in file I/O "
568                return;;
569            12) echo "rsync error : Error in rsync protocol data stream "
570                return;;
571            13) echo "rsync error : Errors with program diagnostics "
572                return;;
573            14) echo "rsync error : Error in IPC code "
574                return;;
575            20) echo "rsync error : Received SIGUSR1 or SIGINT "
576                return;;
577            21) echo "rsync error : Some error returned by waitpid() "
578                return;;
579            22) echo "rsync error : Error allocating core memory buffers "
580                return;;
581            23) echo "rsync error : Partial transfer due to error"
582                return;;
583            24) echo "rsync error : Partial transfer due to vanished source files"
584                return;;
585            30) echo "rsync error : Timeout in data send/receive "
586                return;;
587            *)  echo "rsync error : return code of rsync unknown :" $RET
588                return;;
589        esac
590    else
591        echo "unknown language $MYLANG."
592        return
593    fi
594}
595   
596#D-#==================================================
597#D-function IGCM_sys_Cp
598#D-* Purpose: generic cp
599#D-* Examples:
600#D-
601function IGCM_sys_Cp {
602    IGCM_debug_PushStack "IGCM_sys_Cp" $@
603    if ( $DEBUG_sys ) ; then
604        echo "IGCM_sys_Cp :" $@
605    fi
606
607    typeset RET
608
609    echo cp $@ > out_rsync 2>&1
610    \cp $@ >> out_rsync 2>&1
611    RET=$?
612
613    if [ ${RET} -gt 0 ] ; then
614        echo "IGCM_sys_Cp : error."
615        cat out_rsync
616        IGCM_debug_Exit "IGCM_sys_Cp"
617    fi
618    IGCM_debug_PopStack "IGCM_sys_Cp"
619}
620
621#D-#==================================================
622#D-function IGCM_sys_Rm
623#D-* Purpose: generic rm
624#D-* Examples:
625#D-
626function IGCM_sys_Rm {
627    IGCM_debug_PushStack "IGCM_sys_Rm" -- $@
628    if ( $DEBUG_sys ) ; then
629        echo "IGCM_sys_Rm :" $@
630    fi
631
632    typeset RET
633
634    echo rm $@ > out_rsync 2>&1
635    \rm $@ >> out_rsync 2>&1
636    RET=$?
637
638    if [ ${RET} -gt 0 ] ; then
639        echo "IGCM_sys_Rm : error."
640        cat out_rsync
641        IGCM_debug_Exit "IGCM_sys_Rm"
642    fi
643    IGCM_debug_PopStack "IGCM_sys_Rm"
644}
645
646#D-#==================================================
647#D-function IGCM_sys_Mv
648#D-* Purpose: generic move
649#D-* Examples:
650#D-
651function IGCM_sys_Mv {
652    IGCM_debug_PushStack "IGCM_sys_Mv" $@
653    if ( $DEBUG_sys ) ; then
654        echo "IGCM_sys_Mv :" $@
655    fi
656
657    typeset RET
658
659    echo mv $@ > out_rsync 2>&1
660    \mv $@ >> out_rsync 2>&1
661    RET=$?
662
663    if [ ${RET} -gt 0 ] ; then
664        echo "IGCM_sys_Mv : error in mv."
665        cat out_rsync
666        IGCM_debug_Exit "IGCM_sys_Mv"
667    fi
668
669    IGCM_debug_PopStack "IGCM_sys_Mv"
670}
671
672#D-#==================================================
673#D-function IGCM_sys_Put_Dir
674#D-* Purpose: Copy a complete directory on $(ARCHIVE)
675#D-* Examples:
676#D-
677function IGCM_sys_Put_Dir {
678    IGCM_debug_PushStack "IGCM_sys_Put_Dir" $@
679    if ( $DEBUG_sys ) ; then
680        echo "IGCM_sys_Put_Dir :" $@
681    fi
682    if [ $DRYRUN = 0 ]; then
683        if [ ! -d ${1} ] ; then
684            echo "WARNING : IGCM_sys_Put_Dir ${1} DOES NOT EXIST ."
685            IGCM_debug_PopStack "IGCM_sys_Put_Dir"
686            return
687        fi
688
689        typeset RET
690
691        # Only if we use rsync
692        #IGCM_sys_TestDirArchive $( dirname $2 )
693        #
694        #USUAL WAY
695        rcp -r $1 gaya:$2 > out_rsync 2>&1
696        RET=$?
697
698        if [ ${RET} -gt 0 ] ; then
699            echo "IGCM_sys_Put_Dir : error."
700            cat out_rsync
701            IGCM_debug_Exit "IGCM_sys_Put_Dir"
702        fi
703
704        # due to rcommand latency
705        sleep 30
706
707    else
708        ( ${DEBUG_debug} ) && echo "DRYRUN mode = " $DRYRUN >> stack
709    fi
710    IGCM_debug_PopStack "IGCM_sys_Put_Dir"
711}
712
713#D-#==================================================
714#D-function IGCM_sys_Get_Dir
715#D-* Purpose: Copy a complete directory from $(ARCHIVE)
716#D-* Examples:
717#D-
718function IGCM_sys_Get_Dir {
719    IGCM_debug_PushStack "IGCM_sys_Get_Dir" $@
720    if ( $DEBUG_sys ) ; then
721        echo "IGCM_sys_Get_Dir :" $@
722    fi
723    if [ $DRYRUN = 0 ]; then
724#       if [ ! -d ${1} ] ; then
725#           echo "WARNING : IGCM_sys_Get_Dir ${1} DOES NOT EXIST ."
726#           IGCM_debug_PopStack "IGCM_sys_Get_Dir"
727#           return
728#       fi
729
730        typeset RET
731
732        #USUAL WAY
733        rcp -rp gaya:$1 $2 > out_rsync 2>&1
734        RET=$?
735
736        if [ ${RET} -gt 0 ] ; then
737            echo "IGCM_sys_Get_Dir : error."
738            cat out_rsync
739            IGCM_debug_Exit "IGCM_sys_Get_Dir"
740        fi
741    else
742        ( ${DEBUG_debug} ) && echo "DRYRUN mode = " $DRYRUN >> stack
743    fi
744    IGCM_debug_PopStack "IGCM_sys_Get_Dir"
745}
746
747#D-#==================================================
748#D-function IGCM_sys_Get_Master
749#D-* Purpose: Copy a complete directory from MASTER filesystem
750#D-* Examples:
751#D-
752function IGCM_sys_Get_Master {
753    IGCM_debug_PushStack "IGCM_sys_Get_Master" $@
754    if ( $DEBUG_sys ) ; then
755        echo "IGCM_sys_Get_Master :" $@
756    fi
757    if [ $DRYRUN = 0 ]; then
758        TEST=$( IGCM_sys_RshMaster [ -d $1 ] && echo 1 || echo 0 )
759        if [ ${TEST} -ne 1 ] ; then
760            echo "WARNING : IGCM_sys_Get_Master ${1} DOES NOT EXIST ON ${MASTER}."
761            IGCM_debug_PopStack "IGCM_sys_Get_Master"
762            return
763        fi
764
765        typeset RET
766        sleep 60
767
768        #USUAL WAY
769        rcp -r ${MASTER}:$1 $2 > out_rsync 2>&1
770        RET=$?
771
772        if [ ${RET} -gt 0 ] ; then
773            echo "IGCM_sys_Get_Master : error."
774            cat out_rsync
775            IGCM_debug_Exit "IGCM_sys_Get_Master"
776        fi
777    else
778        ( ${DEBUG_debug} ) && echo "DRYRUN mode = " $DRYRUN >> stack
779    fi
780    IGCM_debug_PopStack "IGCM_sys_Get_Master"
781}
782
783#D-#==================================================
784#D-function IGCM_sys_Put_Out
785#D-* Purpose: Copy a file on $(ARCHIVE) after have chmod it in readonly
786#D-* Examples:
787#D-
788function IGCM_sys_Put_Out {
789    IGCM_debug_PushStack "IGCM_sys_Put_Out" $@
790    if ( $DEBUG_sys ) ; then
791        echo "IGCM_sys_Put_Out :" $@
792    fi
793    if [ $DRYRUN = 0 ]; then
794        if [ ! -f ${1} ] ; then
795            echo "WARNING : IGCM_sys_Put_Out ${1} DOES NOT EXIST ."
796            IGCM_debug_PopStack "IGCM_sys_Put_Out"
797            return 1
798        fi
799
800        typeset RET
801        #
802        if [ X${JobType} = XRUN ] ; then
803            IGCM_sys_Chmod 444 ${1}
804        fi
805        #
806        # Only if we use rsync
807        #IGCM_sys_TestDirArchive $( dirname $2 )
808        #
809        #USUAL WAY
810        mfput $1 $2 > out_rsync 2>&1
811        RET=$?
812
813#       #RSYNC WITH NETWORK RSH CALL
814#       echo ${RSYNC_FRONT} ${RSYNC_opt} --rsync-path=${REMOTE_RSYNC} -e rsh ${RUN_DIR}/$1 ${RHOST}:${2} > out_rsync 2>&1
815#       ${RSYNC_FRONT} ${RSYNC_opt} --rsync-path=${REMOTE_RSYNC} -e rsh ${RUN_DIR}/$1 ${RHOST}:${2} >> out_rsync 2>&1
816
817#       #RSYNC WITH NFS USE
818#       echo ${RSYNC_FRONT} ${RSYNC_opt} ${RUN_DIR}/$1 ${2} > out_rsync 2>&1
819#       ${RSYNC_FRONT} ${RSYNC_opt} ${RUN_DIR}/$1 ${2} >> out_rsync 2>&1
820
821#       RET=$?
822#       IGCM_sys_Rsync_out $RET
823
824#       ${libIGCM}/libIGCM_sys/IGCM_analyse_rsync_out.awk out_rsync
825#       (( RET=RET+$? ))
826
827        if [ ${RET} -gt 0 ] ; then
828            echo "IGCM_sys_Put_Out : error."
829            cat out_rsync
830            IGCM_debug_Print 1 "mfput failed. Make a second try :"
831            #
832            mfput $1 $2 > out_rsync 2>&1
833            RET=$?
834            #
835            if [ ${RET} -gt 0 ] ; then
836                echo "IGCM_sys_Put_Out : error."
837                IGCM_debug_Print 1 "mfput failed twice. You have a problem"
838                cat out_rsync
839                IGCM_debug_Exit "IGCM_sys_Put_Out"
840            fi
841        fi
842    else
843        ( ${DEBUG_debug} ) && echo "DRYRUN mode = " $DRYRUN >> stack
844    fi
845    IGCM_debug_PopStack "IGCM_sys_Put_Out"
846    return 0
847}
848
849#D-#==================================================
850#D-function IGCM_sys_Get
851#D-* Purpose: Get a file from ${ARCHIVE}
852#D-* Examples: IGCM_sys_Get myfile /destpath/myfile_with_PREFIX
853#D-            IGCM_sys_Get /l Array_contain_myfiles /destpath/
854function IGCM_sys_Get {
855    IGCM_debug_PushStack "IGCM_sys_Get" $@
856
857    typeset DEST RET dm_liste ifile target
858
859    if ( $DEBUG_sys ) ; then
860        echo "IGCM_sys_Get :" $@
861    fi
862    if [ $DRYRUN -le 2 ]; then
863        if [ X${1} = X'/l' ] ; then
864            # test if the first file is present in the old computation :
865            eval set +A dm_liste \${${2}}
866        else
867            dm_liste=${1}
868        fi
869        eval DEST=\${${#}}
870
871        # test if the (first) file is present in the old computation :
872        IGCM_sys_TestFileArchive ${dm_liste[0]}
873        RET=$?
874        if [ ${RET} -gt 0 ] ; then
875            echo "IGCM_sys_Get, ERROR : regular file ${dm_liste[0]} DOES NOT EXIST ."
876            IGCM_debug_Exit "IGCM_sys_Get"
877            IGCM_debug_PopStack "IGCM_sys_Get"
878            return
879        fi
880
881        # SD : dm_liste is not suited for computing job
882        #      because we change filename during transfert
883        #      dm_liste is better suited for post-treatment
884        # SD : dm_liste necessary only with RSYNC
885
886        #dm_liste=" "
887        #(( ifile=1 ))
888        #while [ $ifile -lt $# ] ; do
889        #    dm_liste=$( eval echo ${dm_liste[*]} " "\${${ifile}} )
890        #    (( ifile = ifile + 1 ))
891        #done
892        #DEST=$( eval echo \${${#}} )
893
894        #USUAL WAY
895        ##mfget ${dm_liste[*]} ${DEST} > out_rsync 2>&1
896        for BugFileIdris in ${dm_liste[*]} ; do
897            echo ${BugFileIdris}
898            mfget ${BugFileIdris} ${DEST} >>out_rsync 2>&1
899            RET=$?
900            if [ ${RET} -gt 0 ] ; then
901                echo "IGCM_sys_Get : copy error."
902                cat out_rsync
903                #IGCM_debug_Exit "IGCM_sys_Get"
904            fi
905        done
906
907#       #RSYNC WITH NETWORK RSH CALL
908#       echo ${RSYNC_FRONT} ${RSYNC_opt} --rsync-path=${REMOTE_RSYNC} -e rsh ${RHOST}:"${dm_liste}" ${RHOST}:${RUN_DIR}/${DEST} > out_rsync 2>&1
909#       ${RSYNC_FRONT} ${RSYNC_opt} --rsync-path=${REMOTE_RSYNC} -e rsh ${RHOST}:"${dm_liste}" ${RHOST}:${RUN_DIR}/${DEST} >> out_rsync 2>&1
910
911#       #RSYNC WITH NFS USE
912#       echo ${RSYNC_FRONT} ${RSYNC_opt} ${dm_liste} ${RUN_DIR}/${DEST} > out_rsync 2>&1
913#       ${RSYNC_FRONT} ${RSYNC_opt} ${dm_liste} ${RUN_DIR}/${DEST} >> out_rsync 2>&1
914
915#       RET=$?
916#       IGCM_sys_Rsync_out $RET
917
918#       ${libIGCM}/libIGCM_sys/IGCM_analyse_rsync_out.awk out_rsync
919#       (( RET=RET+$? ))
920
921    else
922        ( ${DEBUG_debug} ) && echo "DRYRUN mode = " $DRYRUN >> stack
923    fi
924    IGCM_debug_PopStack "IGCM_sys_Get"
925}
926
927#D-#==================================================
928#D-function IGCM_sys_Put_Dods
929#D-* Purpose: Put $(ARCHIVE) files on DODS internet protocole.
930#D-* Examples:
931#D-
932function IGCM_sys_Put_Dods {
933    IGCM_debug_PushStack "IGCM_sys_Put_Dods" $@
934    if ( $DEBUG_sys ) ; then
935        echo "IGCM_sys_Put_Dods :" $@
936    fi
937    if [ $DRYRUN = 0 ]; then
938        IGCM_sys_TestDirArchive ${R_SAVE}/${1} 
939        if [ $? != 0 ] ; then
940            echo "WARNING : IGCM_sys_Put_Dods ${R_SAVE}/${1} DOES NOT EXIST ."
941            IGCM_debug_PopStack "IGCM_sys_Put_Dods"
942            return
943        fi
944
945        typeset RET
946        #
947        rsh gaya exec /bin/ksh <<EOF
948        cd ${R_SAVE}
949        /usr/local/bin/dods_rm DODS/pub/${LOGIN}/${config_UserChoices_TagName}/${config_UserChoices_JobName}/${1} > /dev/null 2>&1
950        /sbin/chmod -R u+w ${R_SAVE}/${1}
951        /usr/local/bin/dods_cp ${1} DODS/pub/${LOGIN}/${config_UserChoices_TagName}/${config_UserChoices_JobName} > /dev/null 2>&1
952        /sbin/chmod -R +rX ${R_SAVE}/${1}
953        /sbin/chmod -R u+w ${R_SAVE}/${1}
954EOF
955        RET=$?
956
957        if [ ${RET} -gt 0 ] ; then
958            echo "IGCM_sys_Put_Dods : error."
959            cat out_dods
960            IGCM_debug_Exit "IGCM_sys_Put_Dods"
961        fi
962    else
963        ( ${DEBUG_debug} ) && echo "DRYRUN mode = " $DRYRUN >> stack
964    fi
965    IGCM_debug_PopStack "IGCM_sys_Put_Dods"
966}
967
968############################################################## A REVOIR !!
969
970#D-#==================================================
971#D-function IGCM_sys_Rapatrie
972#D-* Purpose: Rapatrie
973#D-* Examples:
974#D-
975function IGCM_sys_Rapatrie {
976    IGCM_debug_PushStack "IGCM_sys_Rapatrie" $@
977    if ( $DEBUG_sys ) ; then
978        echo "IGCM_sys_Rapatrie :" $@
979    fi
980
981    typeset RET=0
982
983    IGCM_sys_Get ${R_STOCKAGE}/$2 $1 ;
984    let $(( RET=RET+$? ))
985    IGCM_sys_Cd $1 ;
986    let $(( RET=RET+$? ))
987    IGCM_sys_UnTar $2 ;
988    let $(( RET=RET+$? ))
989
990    if [ ${RET} -gt 0 ] ; then
991        echo "IGCM_sys_Rapatrie : erreur."
992        IGCM_debug_Exit "IGCM_sys_Rapatrie"
993    fi
994    IGCM_debug_PopStack "IGCM_sys_Rapatrie"
995}
996
997############################################################## A FINIR !!
998
999#D-#==================================================
1000#D-function IGCM_sys_GetDate_FichWork
1001#D-* Purpose: donne la date filesys d'un fichier sur le filesystem WORK
1002#D-* Examples:
1003#D-
1004function IGCM_sys_GetDate_FichWork {
1005    IGCM_debug_PushStack "IGCM_sys_FichWork" $@
1006    if ( $DEBUG_sys ) ; then
1007        echo "IGCM_sys_GetDate_FichWork :" $@
1008    fi
1009    # donne la date filesys d'un fichier sur la machine work
1010    IGCM_debug_PopStack "IGCM_sys_FichWork"
1011}
1012
1013#D-#==================================================
1014#D-function IGCM_sys_GetDate_FichArchive
1015#D-* Purpose: donne la date filesys d'un fichier sur le filesystem ARCHIVE
1016#D-* Examples:
1017#D-
1018function IGCM_sys_GetDate_FichArchive {
1019    IGCM_debug_PushStack "IGCM_sys_FichArchive" $@
1020    if ( $DEBUG_sys ) ; then
1021        echo "IGCM_sys_GetDate_FichArchive :" $@
1022    fi
1023    IGCM_debug_PopStack "IGCM_sys_FichArchive"
1024}
1025
1026##############################################################
1027# REBUILD OPERATOR
1028
1029function IGCM_sys_rebuild {
1030    IGCM_debug_PushStack "IGCM_sys_rebuild" -- $@
1031    if ( $DEBUG_sys ) ; then
1032        echo "IGCM_sys_rebuild :" $@
1033    fi
1034    /home/rech/ces/rces452/REBUILD/bin/rebuild -f -o $@
1035    if [ $? -gt 0 ] ; then
1036       echo "IGCM_sys_rebuild : erreur ${@}."
1037       IGCM_debug_Exit "rebuild"
1038    fi
1039
1040    IGCM_debug_PopStack "IGCM_sys_rebuild"
1041}
1042##############################################################
1043# NCO OPERATOR
1044
1045function IGCM_sys_ncap {
1046    IGCM_debug_PushStack "IGCM_sys_ncap" -- $@
1047    if ( $DEBUG_sys ) ; then
1048        echo "IGCM_sys_ncap :" $@
1049    fi
1050    /usr/local/pub/nco/3.9.6/bin/ncap $@
1051    if [ $? -gt 0 ] ; then
1052       echo "IGCM_sys_ncap : erreur ${@}."
1053       IGCM_debug_Exit "ncap"
1054    fi
1055
1056    IGCM_debug_PopStack "IGCM_sys_ncap"
1057}
1058
1059ncatted=/usr/local/pub/nco/3.9.6/bin/ncatted
1060# Problem with ksh and string passed in this function to ncatted !
1061# function IGCM_sys_ncatted {
1062#     IGCM_debug_PushStack "IGCM_sys_ncatted" -- $@
1063#     if ( $DEBUG_sys ) ; then
1064#       echo "IGCM_sys_ncatted :" $@
1065#     fi
1066#     /usr/local/pub/nco/3.9.6/bin/ncatted $@
1067#     if [ $? -gt 0 ] ; then
1068#        echo "IGCM_sys_ncatted : erreur ${@}."
1069#        IGCM_debug_Exit "ncatted"
1070#     fi
1071
1072#     IGCM_debug_PopStack "IGCM_sys_ncatted"
1073# }
1074
1075function IGCM_sys_ncbo {
1076    IGCM_debug_PushStack "IGCM_sys_ncbo" -- $@
1077    if ( $DEBUG_sys ) ; then
1078        echo "IGCM_sys_ncbo :" $@
1079    fi
1080    /usr/local/pub/nco/3.9.6/bin/ncbo $@
1081    if [ $? -gt 0 ] ; then
1082       echo "IGCM_sys_ncbo : erreur ${@}."
1083       IGCM_debug_Exit "ncbo"
1084    fi
1085
1086    IGCM_debug_PopStack "IGCM_sys_ncbo"
1087}
1088
1089function IGCM_sys_ncdiff {
1090    IGCM_debug_PushStack "IGCM_sys_ncdiff" -- $@
1091    if ( $DEBUG_sys ) ; then
1092        echo "IGCM_sys_ncdiff :" $@
1093    fi
1094    /usr/local/pub/nco/3.9.6/bin/ncdiff $@
1095    if [ $? -gt 0 ] ; then
1096       echo "IGCM_sys_ncdiff : erreur ${@}."
1097       IGCM_debug_Exit "ncdiff"
1098    fi
1099
1100    IGCM_debug_PopStack "IGCM_sys_ncdiff"
1101}
1102
1103function IGCM_sys_ncea {
1104    IGCM_debug_PushStack "IGCM_sys_ncea" -- $@
1105    if ( $DEBUG_sys ) ; then
1106        echo "IGCM_sys_ncea :" $@
1107    fi
1108    /usr/local/pub/nco/3.9.6/bin/ncea $@
1109    if [ $? -gt 0 ] ; then
1110       echo "IGCM_sys_ncea : erreur ${@}."
1111       IGCM_debug_Exit "ncea"
1112    fi
1113
1114    IGCM_debug_PopStack "IGCM_sys_ncea"
1115}
1116
1117function IGCM_sys_ncecat {
1118    IGCM_debug_PushStack "IGCM_sys_ncecat" -- $@
1119    if ( $DEBUG_sys ) ; then
1120        echo "IGCM_sys_ncecat :" $@
1121    fi
1122    /usr/local/pub/nco/3.9.6/bin/ncecat $@
1123    if [ $? -gt 0 ] ; then
1124       echo "IGCM_sys_ncecat : erreur ${@}."
1125       IGCM_debug_Exit "ncecat"
1126    fi
1127
1128    IGCM_debug_PopStack "IGCM_sys_ncecat"
1129}
1130
1131function IGCM_sys_ncflint {
1132    IGCM_debug_PushStack "IGCM_sys_ncflint" -- $@
1133    if ( $DEBUG_sys ) ; then
1134        echo "IGCM_sys_ncflint :" $@
1135    fi
1136    /usr/local/pub/nco/3.9.6/bin/ncflint $@
1137    if [ $? -gt 0 ] ; then
1138       echo "IGCM_sys_ncflint : erreur ${@}."
1139       IGCM_debug_Exit "ncflint"
1140    fi
1141
1142    IGCM_debug_PopStack "IGCM_sys_ncflint"
1143}
1144
1145function IGCM_sys_ncks {
1146    IGCM_debug_PushStack "IGCM_sys_ncks" -- $@
1147    if ( $DEBUG_sys ) ; then
1148        echo "IGCM_sys_ncks :" $@
1149    fi
1150    /usr/local/pub/nco/3.9.6/bin/ncks $@
1151    if [ $? -gt 0 ] ; then
1152       echo "IGCM_sys_ncks : erreur ${@}."
1153       IGCM_debug_Exit "ncks"
1154    fi
1155
1156    IGCM_debug_PopStack "IGCM_sys_ncks"
1157}
1158
1159function IGCM_sys_ncpdq {
1160    IGCM_debug_PushStack "IGCM_sys_ncpdq" -- $@
1161    if ( $DEBUG_sys ) ; then
1162        echo "IGCM_sys_ncpdq :" $@
1163    fi
1164    /usr/local/pub/nco/3.9.6/bin/ncpdq $@
1165    if [ $? -gt 0 ] ; then
1166       echo "IGCM_sys_ncpdq : erreur ${@}."
1167       IGCM_debug_Exit "ncpdq"
1168    fi
1169
1170    IGCM_debug_PopStack "IGCM_sys_ncpdq"
1171}
1172
1173function IGCM_sys_ncra {
1174    IGCM_debug_PushStack "IGCM_sys_ncra" -- $@
1175    if ( $DEBUG_sys ) ; then
1176        echo "IGCM_sys_ncra :" $@
1177    fi
1178    /usr/local/pub/nco/3.9.6/bin/ncra $@
1179    if [ $? -gt 0 ] ; then
1180       echo "IGCM_sys_ncra : erreur ${@}."
1181       IGCM_debug_Exit "ncra"
1182    fi
1183
1184    IGCM_debug_PopStack "IGCM_sys_ncra"
1185}
1186
1187function IGCM_sys_ncrcat {
1188    IGCM_debug_PushStack "IGCM_sys_ncrcat" -- $@
1189    if ( $DEBUG_sys ) ; then
1190        echo "IGCM_sys_ncrcat :" $@
1191    fi
1192    /usr/local/pub/nco/3.9.6/bin/ncrcat $@
1193    if [ $? -gt 0 ] ; then
1194       echo "IGCM_sys_ncrcat : erreur ${@}."
1195       IGCM_debug_Exit "ncrcat"
1196    fi
1197
1198    IGCM_debug_PopStack "IGCM_sys_ncrcat"
1199}
1200
1201function IGCM_sys_ncrename {
1202    IGCM_debug_PushStack "IGCM_sys_ncrename" -- $@
1203    if ( $DEBUG_sys ) ; then
1204        echo "IGCM_sys_ncrename :" $@
1205    fi
1206    /usr/local/pub/nco/3.9.6/bin/ncrename $@
1207    if [ $? -gt 0 ] ; then
1208       echo "IGCM_sys_ncrename : erreur ${@}."
1209       IGCM_debug_Exit "ncrename"
1210    fi
1211
1212    IGCM_debug_PopStack "IGCM_sys_ncrename"
1213}
1214
1215function IGCM_sys_ncwa {
1216    IGCM_debug_PushStack "IGCM_sys_ncwa" -- $@
1217    if ( $DEBUG_sys ) ; then
1218        echo "IGCM_sys_ncwa :" $@
1219    fi
1220    /usr/local/pub/nco/3.9.6/bin/ncwa $@
1221    if [ $? -gt 0 ] ; then
1222       echo "IGCM_sys_ncwa : erreur ${@}."
1223       IGCM_debug_Exit "ncwa"
1224    fi
1225
1226    IGCM_debug_PopStack "IGCM_sys_ncwa"
1227}
1228
1229############################################################
1230# Activate Running Environnment Variables
1231
1232function IGCM_sys_activ_variables {
1233    IGCM_debug_PushStack "IGCM_sys_activ_variables"
1234    if ( $DEBUG_sys ) ; then
1235        echo "IGCM_sys_activ_variables"
1236    fi
1237    IGCM_debug_PopStack "IGCM_sys_activ_variables"
1238}
1239
1240############################################################
1241# Desactivate Running Environnment Variables
1242
1243function IGCM_sys_desactiv_variables {
1244    IGCM_debug_PushStack "IGCM_sys_desactiv_variables"
1245    if ( $DEBUG_sys ) ; then
1246        echo "IGCM_sys_desactiv_variables"
1247    fi
1248    IGCM_debug_PopStack "IGCM_sys_desactiv_variables"
1249}
1250
1251############################################################
1252# Build run file
1253
1254function IGCM_sys_build_run_file {
1255    IGCM_debug_PushStack "IGCM_sys_build_run_file"
1256    if ( $DEBUG_sys ) ; then
1257        echo "IGCM_sys_build_run_file "
1258    fi
1259    IGCM_debug_PopStack "IGCM_sys_build_run_file "
1260}
Note: See TracBrowser for help on using the repository browser.