Index: /trunk/libIGCM/AA_clean_month
===================================================================
--- /trunk/libIGCM/AA_clean_month	(revision 427)
+++ /trunk/libIGCM/AA_clean_month	(revision 428)
@@ -45,5 +45,5 @@
        ( ${DEBUG_debug} ) && IGCM_date_Check
 #-------
-SUBMIT_DIR=${pwd}
+SUBMIT_DIR=$( pwd )
 . ${libIGCM}/libIGCM_sys/libIGCM_sys.ksh
 . ${libIGCM}/libIGCM_config/libIGCM_config.ksh
Index: /trunk/libIGCM/libIGCM_sys/libIGCM_sys.ksh
===================================================================
--- /trunk/libIGCM/libIGCM_sys/libIGCM_sys.ksh	(revision 427)
+++ /trunk/libIGCM/libIGCM_sys/libIGCM_sys.ksh	(revision 428)
@@ -76,5 +76,7 @@
 	echo "sys source obelix lib."
 	. ${libIGCM}/libIGCM_sys/libIGCM_sys_obelix.ksh;;
-
+    iitm*)
+	echo "sys source iitm lib."
+	. ${libIGCM}/libIGCM_sys/libIGCM_sys_iitm.ksh;;
     *)
 	echo "sys source default lib."
Index: /trunk/libIGCM/libIGCM_sys/libIGCM_sys_iitm.ksh
===================================================================
--- /trunk/libIGCM/libIGCM_sys/libIGCM_sys_iitm.ksh	(revision 428)
+++ /trunk/libIGCM/libIGCM_sys/libIGCM_sys_iitm.ksh	(revision 428)
@@ -0,0 +1,1113 @@
+#!/bin/ksh
+
+#**************************************************************
+# Author: Sébastien Denvil
+# Contact: Sebastien.Denvil__at__ipsl.jussieu.fr
+# $Revision:: 423                                      $ Revision of last commit
+# $Author:: sdipsl                                     $ Author of last commit
+# $Date:: 2011-02-18 16:49:14 +0100 (ven. 18 fÃ©vr. 20#$ Date of last commit
+# IPSL (2006)
+#  This software is governed by the CeCILL licence see libIGCM/libIGCM_CeCILL.LIC
+#
+#**************************************************************
+
+#=========================================================
+# The documentation of this file can be automatically generated
+# if you use the prefix #D- for comments to be extracted. 
+# Extract with command: cat lib* | grep "^#D-" | cut -c "4-"
+#=========================================================
+
+#D-#==================================================
+#D-LibIGCM_sys for IITM IBM machine
+#D-#==================================================
+#D-
+#D- This ksh library if a layer under some usefull 
+#D-environment variables and shell commands.
+#D-All those definitions depend on host particularities.
+#D-It manages a stack mechanism and test validity of operations.
+#D-All function described bellow must be prefixed by IGCM_sys.
+
+#====================================================
+# libIGCM_sys PARAMETERS
+#====================================================
+
+#====================================================
+# set DEBUG_sys to true to output calls of function
+typeset -r DEBUG_sys=${DEBUG_sys:=true}
+
+#====================================================
+# Turn in dry run mode ? (sys_Put_Rest, sys_Put_Out, sys_Get)
+typeset -r DRYRUN=${DRYRUN:=0}
+
+# YOU MUST COMPILE YOUR EXE FILES FOR DRYRUN MODE !
+# -------------------------------------------------------------------------------------
+# | DRYRUN=  |  Date computations, | sys_Get    |  Exe    | sys_Put_Out; sys_Put_Rest |
+# |          |  Cp/Exe param files |            |  Chmod  |                           |
+# |          |      Qsub           |            |         |                           |
+# -------------------------------------------------------------------------------------
+# |    0     |       yes           |    yes     |  yes    |      yes                  |
+# -------------------------------------------------------------------------------------
+# |    1     |       yes           |    yes     |  yes    |      no                   |
+# -------------------------------------------------------------------------------------
+# |    2     |       yes           |    yes     |  no     |      no                   |
+# -------------------------------------------------------------------------------------
+# |    3     |       yes           |    no      |  no     |      no                   |
+# -------------------------------------------------------------------------------------
+
+#=====================================================
+# Global Variables :
+#=====================================================
+# Language : "fr" or "en"
+typeset -r MYLANG="fr"
+
+#=====================================================
+# Host and user names 
+# $hostname ou hostname
+typeset  HOST=${HOST:=$( hostname )}
+# $username ou whoami
+typeset  LOGIN=${LOGIN:=$( whoami )}
+# $hostname of the MASTER job
+typeset -r MASTER=iitm01
+
+#D-
+#D-#==================================================
+#D-Program used in libIGCM
+#D-#==================================================
+
+# rsync with path
+typeset -r RSYNC=/usr/bin/rsync
+# RSYNC_opt args to rsync
+typeset -r RSYNC_opt="-va"
+
+#====================================================
+# Host specific DIRECTORIES
+#====================================================
+
+#====================================================
+#- R_EXE   (==> BIN_DIR = ${MODIPSL}/bin )
+typeset -r R_EXE="${MODIPSL}/bin"
+
+#====================================================
+#- SUBMIT_DIR : submission dir
+typeset SUBMIT_DIR=${SUBMIT_DIR:=${LOADL_STEP_INITDIR}}
+
+#====================================================
+#- ARCHIVE
+typeset -r ARCHIVE=$( echo ${HOME} | sed -e "s/gpfs1/gpfs3/" )
+
+#====================================================
+#- Mirror libIGCM from iitm to a post-processing machine 
+typeset -r MirrorlibIGCM=${MirrorlibIGCM:=false}
+
+#====================================================
+#- libIGCM_POST
+typeset -r HOME_POST=${HOME}
+typeset -r libIGCM_POST=${libIGCM}
+
+#====================================================
+#- IN
+typeset -r R_IN=${R_IN:=/gpfs1/home/sabin}
+typeset -r R_IN_ECMWF=${R_IN:=/gpfs1/home/sabin}
+
+#====================================================
+#- OUT
+typeset -r R_OUT=${ARCHIVE}/IGCM_OUT
+
+#====================================================
+#- OUT_POST 
+typeset -r R_OUT_POST=${ARCHIVE}/IGCM_OUT_SCRIPT
+
+#====================================================
+#- RUN_DIR_PATH : Temporary working directory (=> TMP)
+typeset -r RUN_DIR_PATH=${RUN_DIR_PATH:=${ARCHIVE}/RUN/${LOADL_STEP_ID}}
+
+#====================================================
+#- BIG_DIR : BIG_DIR to store files waiting for rebuild
+typeset -r BIG_DIR=${BIG_DIR:=${ARCHIVE}/REBUILD}
+
+#====================================================
+#- HOST_MPIRUN_COMMAND
+typeset -r HOST_MPIRUN_COMMAND=${HOST_MPIRUN_COMMAND:="time poe"}
+
+#====================================================
+#- Max number of arguments passed to nco operator or demigration command
+UNIX_MAX_LIMIT=360
+
+#D-#==================================================
+#D-function IGCM_sys_RshMaster
+#D-* Purpose: Just a fake command to wrapp
+#D-           IGCM_card call in post-treatment
+#D-           Ulam do not see brodie filesystem
+#D-           Cesium do not see all mercure filesystem
+#D-           That's why we need this hack.
+#D-* Examples:
+#D-
+function IGCM_sys_RshMaster {
+    IGCM_debug_PushStack "IGCM_sys_RshMaster" $@
+    /bin/ksh <<-EOF
+    ${@}
+EOF
+    if [ $? -gt 0 ] ; then
+	echo "IGCM_sys_RshArchive : erreur."
+	IGCM_debug_Exit "IGCM_sys_RshArchive"
+    fi
+    IGCM_debug_PopStack "IGCM_sys_RshMaster"
+}
+
+#D-#==================================================
+#D-function IGCM_sys_RshArchive
+#D-* Purpose: Archive rsh command
+#D-* Examples:
+#D-
+function IGCM_sys_RshArchive {
+    IGCM_debug_PushStack "IGCM_sys_RshArchive" $@
+    /bin/ksh <<-EOF
+    ${@}
+EOF
+    if [ $? -gt 0 ] ; then
+	echo "IGCM_sys_RshArchive : erreur."
+	IGCM_debug_Exit "IGCM_sys_RshArchive"
+    fi
+    IGCM_debug_PopStack "IGCM_sys_RshArchive"
+}
+
+#D-#==================================================
+#D-function IGCM_sys_RshPost
+#D-* Purpose: Post-process rsh command
+#D-* Examples:
+#D-
+function IGCM_sys_RshPost {
+    IGCM_debug_PushStack "IGCM_sys_RshPost" $@
+    if ( $DEBUG_sys ) ; then
+	echo "IGCM_sys_RshPost :" $@
+    fi
+    /bin/ksh ${@}
+    #rsh ulam exec /bin/ksh ${@}
+    if [ $? -gt 0 ] ; then
+	echo "IGCM_sys_RshPost : erreur."
+	IGCM_debug_Exit "IGCM_sys_RshPost"
+    fi
+    IGCM_debug_PopStack "IGCM_sys_RshPost"
+}
+
+#D-#==================================================
+#D-function IGCM_sys_SendMail
+#D-* Purpose: Send mail when simulation is over
+#D-* Examples:
+#D-
+function IGCM_sys_SendMail {
+    IGCM_debug_PushStack "IGCM_sys_SendMail" $@
+    if ( $DEBUG_sys ) ; then
+	echo "IGCM_sys_SendMail :" $@
+    fi
+    cat  << END_MAIL > job_end.mail
+Dear ${LOGIN},
+
+  Simulation ${config_UserChoices_JobName} is finished on supercomputer `hostname`.
+  Job started : ${DateBegin}
+  Job ended   : ${DateEnd}
+  Ouput files are available in ${R_SAVE}
+  Script files and Script Outputs are available in ${SUBMIT_DIR}
+END_MAIL
+
+    if [ ! -z ${config_UserChoices_MailName} ] ; then
+	mailx -s "${config_UserChoices_JobName} completed" ${config_UserChoices_MailName} <  job_end.mail
+    elif [ -f ~/.forward ] ; then
+	mailx -s "${config_UserChoices_JobName} completed" $( cat ~/.forward ) < job_end.mail
+    else
+	mailx -s "${config_UserChoices_JobName} completed" ${USER} < job_end.mail
+    fi
+
+    if [ $? -gt 0 ] ; then
+	echo "IGCM_sys_SendMail : erreur."
+	IGCM_debug_Exit "IGCM_sys_SendMail"
+    fi
+    IGCM_debug_PopStack "IGCM_sys_SendMail"
+}
+
+#D-#==================================================
+#D-function IGCM_sys_Mkdir
+#D-* Purpose: Master locale mkdir command
+#D-* Examples:
+#D-
+function IGCM_sys_Mkdir {
+    IGCM_debug_PushStack "IGCM_sys_Mkdir" $@
+    if ( $DEBUG_sys ) ; then
+	echo "IGCM_sys_Mkdir :" $@
+    fi
+    if [ ! -d ${1} ]; then
+	\mkdir -p $1
+	if [ $? -gt 0 ] ; then
+	    echo "IGCM_sys_Mkdir : erreur."
+	    IGCM_debug_Exit "IGCM_sys_Mkdir"
+	fi
+    fi
+    # vérification :
+    if [ ! -d ${1} ] ; then
+	echo "IGCM_sys_Mkdir : erreur."
+	IGCM_debug_Exit "IGCM_sys_Mkdir"
+    fi
+    IGCM_debug_PopStack "IGCM_sys_Mkdir"
+}
+
+#D-#==================================================
+#D-function IGCM_sys_MkdirArchive
+#D-* Purpose: Mkdir on Archive
+#D-* Examples:
+#D-
+function IGCM_sys_MkdirArchive {
+    IGCM_debug_PushStack "IGCM_sys_MkdirArchive" $@
+    if ( $DEBUG_sys ) ; then
+	echo "IGCM_sys_MkdirArchive :" $@
+    fi
+    #- creation de repertoire sur le serveur fichier
+    mkdir -p $1
+
+    if [ $? -gt 0 ] ; then
+	echo "IGCM_sys_MkdirArchive : erreur."
+	IGCM_debug_Exit "IGCM_sys_MkdirArchive"
+    fi
+    IGCM_debug_PopStack "IGCM_sys_MkdirArchive"
+}
+
+#D-#==================================================
+#D-function IGCM_sys_MkdirWork
+#D-* Purpose: Mkdir on Work
+#D-* Examples:
+#D-
+function IGCM_sys_MkdirWork {
+    IGCM_debug_PushStack "IGCM_sys_MkdirWork" $@
+    if ( $DEBUG_sys ) ; then
+	echo "IGCM_sys_MkdirWork :" $@
+    fi
+    #- creation de repertoire sur le serveur fichier
+    if [ ! -d ${1} ]; then 
+	\mkdir -p $1
+	if [ $? -gt 0 ] ; then
+	    echo "IGCM_sys_MkdirWork : erreur."
+	    IGCM_debug_Exit "IGCM_sys_MkdirWork"
+	fi
+    fi
+    IGCM_debug_PopStack "IGCM_sys_MkdirWork"
+}
+
+#D-#==================================================
+#D-function IGCM_sys_Cd
+#D-* Purpose: master cd command
+#D-* Examples:
+#D-
+function IGCM_sys_Cd {
+    IGCM_debug_PushStack "IGCM_sys_Cd" $@
+    if ( $DEBUG_sys ) ; then
+	echo "IGCM_sys_Cd :" $@
+    fi
+    \cd $1
+    if [ $? -gt 0 ] ; then
+	echo "IGCM_sys_Cd : erreur."
+	IGCM_debug_Exit "IGCM_sys_Cd"
+    fi
+    IGCM_debug_PopStack "IGCM_sys_Cd"
+}
+
+#D-#==================================================
+#D-function IGCM_sys_Chmod
+#D-* Purpose: Chmod
+#D-* Examples:
+#D-
+function IGCM_sys_Chmod {
+    IGCM_debug_PushStack "IGCM_sys_Chmod" -- $@
+    if ( $DEBUG_sys ) ; then
+	echo "IGCM_sys_Chmod :" $@
+    fi
+    if [ $DRYRUN -le 1 ]; then
+	\chmod $@
+	if [ $? -gt 0 ] ; then
+	    echo "IGCM_sys_Chmod : erreur."
+	    IGCM_debug_Exit "IGCM_sys_Chmod"
+	fi
+    else
+	( ${DEBUG_debug} ) && echo "DRYRUN mode = " $DRYRUN >> stack
+    fi
+    IGCM_debug_PopStack "IGCM_sys_Chmod"
+}
+
+#D-#==================================================
+#D-function IGCM_sys_FileSize
+#D-* Purpose: Filesize
+#D-* Examples:
+#D-
+function IGCM_sys_FileSize {
+    IGCM_debug_PushStack "IGCM_sys_FileSize" $@
+
+    typeset sizeF
+    set +A sizeF -- $( ls -la ${1} )
+    if [ $? -gt 0 ] ; then
+	IGCM_debug_Exit "IGCM_sys_FileSize"
+    fi
+    eval ${2}=${sizeF[4]}
+
+    IGCM_debug_PopStack "IGCM_sys_FileSize"
+}
+
+#D-#==================================================
+#D-function IGCM_sys_TestDir
+#D-* Purpose: Test Directory that must exists
+#D-* Examples:
+#D-
+function IGCM_sys_TestDir {
+    IGCM_debug_PushStack "IGCM_sys_TestDir" $@
+    if ( $DEBUG_sys ) ; then
+	echo "IGCM_sys_TestDir :" $@
+    fi
+    typeset ExistFlag
+    ExistFlag=$( [ -d $1 ] && echo 0 || echo 1 )
+    IGCM_debug_PopStack "IGCM_sys_TestDir"
+
+    return ${ExistFlag}
+}
+
+#D-#==================================================
+#D-function IGCM_sys_TestDirArchive
+#D-* Purpose: Test Directory that must exists on Archive
+#D-* Examples:
+#D-
+function IGCM_sys_TestDirArchive {
+    IGCM_debug_PushStack "IGCM_sys_TestDirArchive" $@
+    if ( $DEBUG_sys ) ; then
+	echo "IGCM_sys_TestDirArchive :" $@
+    fi
+    typeset ExistFlag
+    ExistFlag=$( IGCM_sys_RshArchive "[ -d $1 ] && echo 0 || echo 1" )
+    IGCM_debug_PopStack "IGCM_sys_TestDirArchive"
+
+    return ${ExistFlag}
+}
+
+#D-#==================================================
+#D-function IGCM_sys_TestFileArchive
+#D-* Purpose: Test file that must NOT EXISTS on Archive
+#D-* Examples:
+#D-
+function IGCM_sys_TestFileArchive {
+    IGCM_debug_PushStack "IGCM_sys_TestFileArchive" $@
+    typeset ExistFlag
+    ExistFlag=$( IGCM_sys_RshArchive "[ -f $1 ] && echo 0 || echo 1" )
+    IGCM_debug_PopStack "IGCM_sys_TestFileArchive"
+
+    return ${ExistFlag}
+}
+
+#D-#==================================================
+#D-function IGCM_sys_CountFileArchive
+#D-* Purpose: Count files on Archive filesystem
+#D-* Examples:
+#D-
+function IGCM_sys_CountFileArchive {
+    IGCM_debug_PushStack "IGCM_sys_CountFileArchive" $@
+    IGCM_sys_RshArchive "ls ${@} 2>/dev/null | wc -l"
+    if [ $? -gt 0 ] ; then
+	echo "IGCM_sys_CountFileArchive : erreur."
+    fi
+    IGCM_debug_PopStack "IGCM_sys_CountFileArchive"
+}
+
+#D-#==================================================
+#D-function IGCM_sys_Tree
+#D-* Purpose: Tree directories with files on ${ARCHIVE}
+#D-* Examples: IGCM_sys_Tree ${R_IN} ${R_OUT}
+#D-
+function IGCM_sys_Tree {
+    IGCM_debug_PushStack "IGCM_sys_Tree" $@
+    if ( $DEBUG_sys ) ; then
+	echo "IGCM_sys_Tree :" $@
+    fi
+
+    \ls -r $@
+
+    IGCM_debug_PopStack "IGCM_sys_Tree"
+}
+
+#D-#==================================================
+#D-function IGCM_sys_Tar
+#D-* Purpose: master un-tar command
+#D-* Examples:
+#D-
+function IGCM_sys_Tar {
+    IGCM_debug_PushStack "IGCM_sys_Tar" $@
+    if ( $DEBUG_sys ) ; then
+	echo "IGCM_sys_Tar :" $@
+    fi
+    \tar cvf $@
+    if [ $? -gt 0 ] ; then
+	echo "IGCM_sys_Tar : erreur."
+	IGCM_debug_Exit "IGCM_sys_Tar"
+    fi
+    \tar tvf $1
+
+    IGCM_debug_PopStack "IGCM_sys_Tar"
+}
+
+#D-#==================================================
+#D-function IGCM_sys_UnTar
+#D-* Purpose: master un-tar command
+#D-* Examples:
+#D-
+function IGCM_sys_UnTar {
+    IGCM_debug_PushStack "IGCM_sys_UnTar" $@
+    if ( $DEBUG_sys ) ; then
+	echo "IGCM_sys_UnTar :" $@
+    fi
+    \tar xvf $1
+    if [ $? -gt 0 ] ; then
+	echo "IGCM_sys_UnTar : erreur."
+	IGCM_debug_Exit "IGCM_sys_UnTar"
+    fi
+    IGCM_debug_PopStack "IGCM_sys_UnTar"
+}
+
+#D-#==================================================
+#D-function IGCM_sys_Qsub
+#D-* Purpose: Qsub new job
+#D-* Examples:
+#D-
+function IGCM_sys_Qsub {
+    IGCM_debug_PushStack "IGCM_sys_Qsub" $@
+    if ( $DEBUG_sys ) ; then
+	echo "IGCM_sys_Qsub :" $@
+    fi
+    {
+      [ ${#@} = 1 ] &&  { cd $LOADL_STEP_INITDIR ; /usr/lpp/LoadL/full/bin/llsubmit $1 ; ERROR=$? ; cd - ; }
+      [ ${#@} = 2 ] &&  { cd $2 ; /usr/lpp/LoadL/full/bin/llsubmit $1 ; ERROR=$? ; cd - ; }
+    }
+    if [ ${ERROR} -gt 0 ] ; then
+	echo "IGCM_sys_Qsub : erreur $@."
+	IGCM_debug_Exit "IGCM_sys_Qsub"
+    fi
+    IGCM_debug_PopStack "IGCM_sys_Qsub"
+}
+
+#D-#==================================================
+#D-function IGCM_sys_QsubPost
+#D-* Purpose: Qsub new job on scalaire
+#D-* Examples:
+#D-
+function IGCM_sys_QsubPost {
+    IGCM_debug_PushStack "IGCM_sys_QsubPost" $@
+    if ( $DEBUG_sys ) ; then
+	echo "IGCM_sys_QsubPost :" $@
+    fi
+    cd ${POST_DIR}
+    /usr/lpp/LoadL/full/bin/llsubmit ${libIGCM_POST}/$1.job
+    cd -
+    if [ $? -gt 0 ] ; then
+	echo "IGCM_sys_QsubPost : erreur " $@
+	IGCM_debug_Exit "IGCM_sys_QsubPost"
+    fi
+    IGCM_debug_PopStack "IGCM_sys_QsubPost"
+}
+
+#D-*************************
+#D- File transfer functions 
+#D-*************************
+#D-
+
+#D-#==================================================
+#D-function IGCM_sys_Rsync_out
+#D-* Purpose: treat return val of rsync
+#D-* Examples: IGCM_sys_Rsync_out out_RET_rsync
+#D-  Error values and explanations can depend on your system version.
+function IGCM_sys_Rsync_out {
+    RET=$1
+    if [ ! $RET ] ; then
+	echo "rsync error !"
+    fi
+
+    if [ $MYLANG = "fr" ]; then
+	case $RET in
+	    0)  return ;;
+	    1)  echo "Erreur de rsync ; RERR_SYNTAX : "
+		echo "Erreur de syntaxe ou d'utilisation."
+		return;;
+	    2)  echo "Erreur de rsync ; RERR_PROTOCOL : "
+		echo "Incompatibilité de protocole."
+		return;;
+	    3)  echo "Erreur de rsync ; RERR_FILESELECT 3"
+		echo "Erreurs  lors  de  la  sélection des fichiers d'entrée sortie et"
+		echo "répertoires"
+		return;;
+	    4)  echo "Erreur de rsync ; RERR_UNSUPPORTED"
+		echo "Action demandée non supportée : une tentative de manipulation de"
+		echo "fichiers  64-bits  sur une plate-forme qui ne les supporte pas a"
+		echo "été faite ; ou une option qui est supportée par le  client  mais"
+		echo "pas par le serveur a été spécifiée."
+		return;;
+	    10) echo "Erreur de rsync ; RERR_SOCKETIO"
+		echo "Erreur dans le socket d'entrée sortie"
+		return;;
+	    11) echo "Erreur de rsync ; RERR_FILEIO"
+		echo "Erreur d'entrée sortie fichier"
+		return;;
+	    12) echo "Erreur de rsync ; RERR_STREAMIO"
+		echo "Erreur dans flux de donnée du protocole rsync"
+		return;;
+	    13) echo "Erreur de rsync ; RERR_MESSAGEIO"
+		echo "Erreur avec les diagnostics du programme"
+		return;;
+	    14) echo "Erreur de rsync ; RERR_IPC"
+		echo "Erreur dans le code IPC"
+		return;;
+	    20) echo "Erreur de rsync ; RERR_SIGNAL"
+		echo "SIGUSR1 ou SIGINT reçu"
+		return;;
+	    21) echo "Erreur de rsync ; RERR_WAITCHILD"
+		echo "Une erreur retournée par waitpid()"
+		return;;
+	    22) echo "Erreur de rsync ; RERR_MALLOC"
+		echo "Erreur lors de l'allocation des tampons de mémoire de coeur"
+		return;;
+	    23) echo ""
+                echo "Erreur fichier inexistant"
+		return;;
+	    30) echo "Erreur de rsync ; RERR_TIMEOUT"
+		echo "Temps d'attente écoulé dans l'envoi/réception de données"
+		return;;
+	    *)  echo "Erreur de rsync : code de retour de rsync inconnu :" $RET
+		return;;
+	esac
+    elif [ $MYLANG = "en" ] ; then
+	case $RET in
+	    0)  return;;		
+	    1)  echo "rsync error : Syntax or usage error "
+		return;;
+	    2)  echo "rsync error : Protocol incompatibility "
+		return;;
+	    3)  echo "rsync error : Errors selecting input/output files, dirs"
+		return;;
+	    4)  echo "rsync error : Requested action not supported: an attempt"
+		echo "was made to manipulate 64-bit files on a platform that cannot support"
+		echo "them; or an option was specified that is supported by the client and"
+		echo "not by the server."
+		return;;
+	    5)  echo "rsync error : Error starting client-server protocol"
+		return;;
+	    10) echo "rsync error : Error in socket I/O "
+		return;;
+	    11) echo "rsync error : Error in file I/O "
+		return;;
+	    12) echo "rsync error : Error in rsync protocol data stream "
+		return;;
+	    13) echo "rsync error : Errors with program diagnostics "
+		return;;
+	    14) echo "rsync error : Error in IPC code "
+		return;;
+	    20) echo "rsync error : Received SIGUSR1 or SIGINT "
+		return;;
+	    21) echo "rsync error : Some error returned by waitpid() "
+		return;;
+	    22) echo "rsync error : Error allocating core memory buffers "
+		return;;
+	    23) echo "rsync error : Partial transfer due to error"
+		return;;
+	    24) echo "rsync error : Partial transfer due to vanished source files"
+		return;;
+	    30) echo "rsync error : Timeout in data send/receive "
+		return;;
+	    *)  echo "rsync error : return code of rsync unknown :" $RET
+		return;;
+	esac
+    else
+	echo "unknown language $MYLANG."
+	return
+    fi
+}
+
+#D-#==================================================
+#D-function IGCM_sys_Cp
+#D-* Purpose: generic cp
+#D-* Examples:
+#D-
+function IGCM_sys_Cp {
+    IGCM_debug_PushStack "IGCM_sys_Cp" $@
+    if ( $DEBUG_sys ) ; then
+	echo "IGCM_sys_Cp :" $@
+    fi
+
+    typeset RET
+
+    echo cp $@ > out_rsync 2>&1
+    \cp $@ >> out_rsync 2>&1
+    RET=$?
+
+    if [ ${RET} -gt 0 ] ; then
+	echo "IGCM_sys_Cp : error."
+	cat out_rsync
+	IGCM_debug_Exit "IGCM_sys_Cp"
+    fi
+    IGCM_debug_PopStack "IGCM_sys_Cp"
+}
+
+#D-#==================================================
+#D-function IGCM_sys_Rm
+#D-* Purpose: generic rm
+#D-* Examples:
+#D-
+function IGCM_sys_Rm {
+    IGCM_debug_PushStack "IGCM_sys_Rm" -- $@
+    if ( $DEBUG_sys ) ; then
+	echo "IGCM_sys_Rm :" $@
+    fi
+
+    typeset RET
+
+    echo rm $@ > out_rsync 2>&1
+    \rm $@ >> out_rsync 2>&1
+    RET=$?
+
+    if [ ${RET} -gt 0 ] ; then
+	echo "IGCM_sys_Rm : error."
+	cat out_rsync
+	IGCM_debug_Exit "IGCM_sys_Rm"
+    fi
+    IGCM_debug_PopStack "IGCM_sys_Rm"
+}
+
+#D-#==================================================
+#D-function IGCM_sys_RmRunDir
+#D-* Purpose: rm tmpdir (dummy function most of the time batch
+#D-                      scheduler will do the job)
+#D-* Examples:
+#D-
+function IGCM_sys_RmRunDir {
+    IGCM_debug_PushStack "IGCM_sys_RmRunDir" -- $@
+    if ( $DEBUG_sys ) ; then
+	echo "IGCM_sys_RmRunDir :" $@
+    fi
+
+    typeset RET
+
+    echo rm $@ > out_rsync 2>&1
+    \rm $@ >> out_rsync 2>&1
+    RET=$?
+
+    if [ ${RET} -gt 0 ] ; then
+	echo "IGCM_sys_RmRunDir : error."
+	cat out_rsync
+	IGCM_debug_Exit "IGCM_sys_RmRunDir"
+    else
+	\rm out_rsync
+    fi
+
+    IGCM_debug_PopStack "IGCM_sys_RmRunDir"
+}
+
+#D-#==================================================
+#D-function IGCM_sys_Mv
+#D-* Purpose: generic move
+#D-* Examples:
+#D-
+function IGCM_sys_Mv {
+    IGCM_debug_PushStack "IGCM_sys_Mv" $@
+    if ( $DEBUG_sys ) ; then
+	echo "IGCM_sys_Mv :" $@
+    fi
+
+    if [ $DRYRUN = 0 ]; then
+
+        typeset RET
+            
+        echo mv $@ > out_rsync 2>&1
+        \mv $@ >> out_rsync 2>&1
+        RET=$?
+    
+        if [ ${RET} -gt 0 ] ; then
+            echo "IGCM_sys_Mv : error in mv."
+            cat out_rsync
+            IGCM_debug_Exit "IGCM_sys_Mv"
+        fi
+    else
+        ( ${DEBUG_debug} ) && echo "DRYRUN mode = " $DRYRUN >> stack
+    fi
+
+    IGCM_debug_PopStack "IGCM_sys_Mv"
+}
+
+#D-#==================================================
+#D-function IGCM_sys_Put_Dir
+#D-* Purpose: Copy a complete directory on $(ARCHIVE)
+#D-* Examples:
+#D-
+function IGCM_sys_Put_Dir {
+    IGCM_debug_PushStack "IGCM_sys_Put_Dir" $@
+    if ( $DEBUG_sys ) ; then
+	echo "IGCM_sys_Put_Dir :" $@
+    fi
+    if [ $DRYRUN = 0 ]; then
+	if [ ! -d ${1} ] ; then
+	    echo "WARNING : IGCM_sys_Put_Dir ${1} DOES NOT EXIST ."
+	    IGCM_debug_PopStack "IGCM_sys_Put_Dir"
+	    return
+	fi
+
+	typeset RET
+
+	# Only if we use rsync
+	#IGCM_sys_TestDirArchive $( dirname $2 )
+	#
+	#USUAL WAY
+	\cp -r $1 $2 > out_rsync 2>&1
+  	RET=$?
+
+	if [ ${RET} -gt 0 ] ; then
+	    echo "IGCM_sys_Put_Dir : error."
+	    cat out_rsync
+	    IGCM_debug_Exit "IGCM_sys_Put_Dir"
+	fi
+    else
+	( ${DEBUG_debug} ) && echo "DRYRUN mode = " $DRYRUN >> stack
+    fi
+    IGCM_debug_PopStack "IGCM_sys_Put_Dir"
+}
+
+#D-#==================================================
+#D-function IGCM_sys_Get_Dir
+#D-* Purpose: Copy a complete directory from $(ARCHIVE)
+#D-* Examples:
+#D-
+function IGCM_sys_Get_Dir {
+    IGCM_debug_PushStack "IGCM_sys_Get_Dir" $@
+    if ( $DEBUG_sys ) ; then
+	echo "IGCM_sys_Get_Dir :" $@
+    fi
+    if [ $DRYRUN = 0 ]; then
+	if [ ! -d ${1} ] ; then
+	    echo "WARNING : IGCM_sys_Get_Dir ${1} DOES NOT EXIST ."
+	    IGCM_debug_PopStack "IGCM_sys_Get_Dir"
+	    return
+	fi
+
+	typeset RET
+
+	#USUAL WAY
+	\cp -rp $1 $2 > out_rsync 2>&1
+  	RET=$?
+
+	if [ ${RET} -gt 0 ] ; then
+	    echo "IGCM_sys_Get_Dir : error."
+	    cat out_rsync
+	    IGCM_debug_Exit "IGCM_sys_Get_Dir"
+	fi
+    else
+	( ${DEBUG_debug} ) && echo "DRYRUN mode = " $DRYRUN >> stack
+    fi
+    IGCM_debug_PopStack "IGCM_sys_Get_Dir"
+}
+
+#D-#==================================================
+#D-function IGCM_sys_Get_Master
+#D-* Purpose: Copy a complete directory from MASTER filesystem
+#D-* Examples:
+#D-
+function IGCM_sys_Get_Master {
+    IGCM_debug_PushStack "IGCM_sys_Get_Master" $@
+    if ( $DEBUG_sys ) ; then
+	echo "IGCM_sys_Get_Master :" $@
+    fi
+    if [ $DRYRUN = 0 ]; then
+        if [ ! -d ${1} ] ; then
+            echo "WARNING : IGCM_sys_Get_Dir ${1} DOES NOT EXIST ."
+            IGCM_debug_PopStack "IGCM_sys_Get_Dir"
+            return
+        fi
+
+        typeset RET
+
+        #USUAL WAY
+        \cp -rp $1 $2 > out_rsync 2>&1
+        RET=$?
+
+        if [ ${RET} -gt 0 ] ; then
+            echo "IGCM_sys_Get_Dir : error."
+            cat out_rsync
+            IGCM_debug_Exit "IGCM_sys_Get_Dir"
+        fi
+    else
+	( ${DEBUG_debug} ) && echo "DRYRUN mode = " $DRYRUN >> stack
+    fi
+    IGCM_debug_PopStack "IGCM_sys_Get_Master"
+}
+
+#D-#==================================================
+#D-function IGCM_sys_Put_Rest
+#D-* Purpose: Put computied restarts on $(ARCHIVE).
+#D-           File and target directory must exist.
+#D-* Examples:
+#D-
+function IGCM_sys_Put_Rest {
+    IGCM_debug_PushStack "IGCM_sys_Put_Rest" $@
+    if ( $DEBUG_sys ) ; then
+	echo "IGCM_sys_Put_Rest :" $@
+    fi
+    if [ $DRYRUN = 0 ]; then
+	if [ ! -f ${1} ] ; then
+	    echo "ERROR : IGCM_sys_Put_Rest ${1} DOES NOT EXIST ."
+	    IGCM_debug_Exit "IGCM_sys_Put_Rest"
+	fi
+
+	typeset RET
+	#
+	if [ X${JobType} = XRUN ] ; then
+	    IGCM_sys_Chmod 444 ${1}
+	fi
+	#
+	# Only if we use rsync
+	#IGCM_sys_MkdirArchive $( dirname $2 )
+	#
+	#USUAL WAY
+	\cp $1 $2 > out_rsync 2>&1
+  	RET=$?
+
+	if [ ${RET} -gt 0 ] ; then
+	    echo "IGCM_sys_Put_Rest : error."
+	    cat out_rsync
+	    IGCM_debug_Exit "IGCM_sys_Put_Rest"
+	fi
+    else
+	( ${DEBUG_debug} ) && echo "DRYRUN mode = " $DRYRUN >> stack
+    fi
+    IGCM_debug_PopStack "IGCM_sys_Put_Rest"
+}
+
+#D-#==================================================
+#D-function IGCM_sys_Put_Out
+#D-* Purpose: Copy a file on $(ARCHIVE) after have chmod it in readonly
+#D-* Examples:
+#D-
+function IGCM_sys_Put_Out {
+    IGCM_debug_PushStack "IGCM_sys_Put_Out" $@
+    if ( $DEBUG_sys ) ; then
+	echo "IGCM_sys_Put_Out :" $@
+    fi
+    if [ $DRYRUN = 0 ]; then
+	if [ ! -f ${1} ] ; then
+	    echo "WARNING : IGCM_sys_Put_Out ${1} DOES NOT EXIST ."
+	    IGCM_debug_PopStack "IGCM_sys_Put_Out"
+	    return 1
+	fi
+	#
+	IGCM_sys_MkdirArchive $( dirname $2 )
+	#
+	typeset RET
+	#
+	if [ X${JobType} = XRUN ] ; then
+	    if [ X${3} = X ] ; then
+		IGCM_sys_Chmod 444 ${1}
+	    fi
+	fi
+	#
+	#USUAL WAY
+	\cp $1 $2 > out_rsync 2>&1
+	RET=$?
+
+	if [ ${RET} -gt 0 ] ; then
+	    echo "IGCM_sys_Put_Out : error."
+	    cat out_rsync
+	    IGCM_debug_Exit "IGCM_sys_Put_Out"
+	fi
+    else
+	( ${DEBUG_debug} ) && echo "DRYRUN mode = " $DRYRUN >> stack
+    fi
+    IGCM_debug_PopStack "IGCM_sys_Put_Out"
+    return 0
+}
+
+#D-#==================================================
+#D-function IGCM_sys_Get
+#D-* Purpose: Get a file from ${ARCHIVE}
+#D-* Examples: IGCM_sys_Get myfile /destpath/myfile_with_PREFIX
+#D-            IGCM_sys_Get /l Array_contain_myfiles /destpath/
+function IGCM_sys_Get {
+    IGCM_debug_PushStack "IGCM_sys_Get" $@
+
+    typeset DEST RET dm_liste ifile target
+
+    if ( $DEBUG_sys ) ; then
+	echo "IGCM_sys_Get :" $@
+    fi
+    if [ $DRYRUN -le 2 ]; then
+	if [ X${1} = X'/l' ] ; then
+            # test if the first file is present in the old computation :
+	    eval set +A dm_liste \${${2}}
+	else
+	    dm_liste=${1}
+	fi
+	eval DEST=\${${#}}
+
+        # test if the (first) file is present in the old computation :
+	IGCM_sys_TestFileArchive ${dm_liste[0]}
+	RET=$?
+        if [ ${RET} -gt 0 ] ; then
+	    echo "IGCM_sys_Get, ERROR : regular file ${dm_liste[0]} DOES NOT EXIST ."
+	    IGCM_debug_Exit "IGCM_sys_Get"
+	    return
+        fi
+
+	# SD : dm_liste is not suited for computing job
+	#      because we change filename during transfert
+	#      dm_liste is better suited for post-treatment
+	#dm_liste=" "
+  	#(( ifile=1 ))
+	#while [ $ifile -lt $# ] ; do
+	#    dm_liste=$( eval echo ${dm_liste} " "\${${ifile}} )
+	#    (( ifile = ifile + 1 ))
+	#done
+	#DEST=$( eval echo \${${#}} )
+
+	#USUAL WAY
+	\cp ${dm_liste[*]} ${DEST} > out_rsync 2>&1
+  	RET=$?
+
+	if [ ${RET} -gt 0 ] ; then
+	    echo "IGCM_sys_Get : copy error."
+	    cat out_rsync
+	    IGCM_debug_Exit "IGCM_sys_Get"
+	fi
+    else
+	( ${DEBUG_debug} ) && echo "DRYRUN mode = " $DRYRUN >> stack
+    fi
+    IGCM_debug_PopStack "IGCM_sys_Get"
+}
+
+############################################################## A FINIR !!
+
+#D-#==================================================
+#D-function IGCM_sys_GetDate_FichWork
+#D-* Purpose: donne la date filesys d'un fichier sur le filesystem WORK
+#D-* Examples:
+#D-
+function IGCM_sys_GetDate_FichWork {
+    IGCM_debug_PushStack "IGCM_sys_FichWork" $@
+    if ( $DEBUG_sys ) ; then
+	echo "IGCM_sys_GetDate_FichWork :" $@
+    fi
+    # donne la date filesys d'un fichier sur la machine work
+    IGCM_debug_PopStack "IGCM_sys_FichWork"
+}
+
+#D-#==================================================
+#D-function IGCM_sys_GetDate_FichArchive
+#D-* Purpose: donne la date filesys d'un fichier sur le filesystem ARCHIVE 
+#D-* Examples:
+#D-
+function IGCM_sys_GetDate_FichArchive {
+    IGCM_debug_PushStack "IGCM_sys_FichArchive" $@
+    if ( $DEBUG_sys ) ; then
+	echo "IGCM_sys_GetDate_FichArchive :" $@
+    fi
+    IGCM_debug_PopStack "IGCM_sys_FichArchive"
+}
+
+##############################################################
+# REBUILD OPERATOR
+
+function IGCM_sys_rebuild {
+    IGCM_debug_PushStack "IGCM_sys_rebuild" -- $@
+    if ( $DEBUG_sys ) ; then
+	echo "IGCM_sys_rebuild :" $@
+    fi
+    /gpfs1/home/sebastien/REBUILD/rebuild -f -o $@
+    if [ $? -gt 0 ] ; then
+       echo "IGCM_sys_rebuild : erreur ${@}."
+       IGCM_debug_Exit "rebuild"
+    fi
+
+    IGCM_debug_PopStack "IGCM_sys_rebuild"
+}
+
+############################################################
+# Activate Running Environnment Variables
+
+function IGCM_sys_activ_variables {
+    IGCM_debug_PushStack "IGCM_sys_activ_variables"
+    if ( $DEBUG_sys ) ; then
+	echo "IGCM_sys_activ_variables "
+    fi
+
+# --------------------------------------------------------------------
+#D- MPI specifications
+# --------------------------------------------------------------------
+
+# --------------------------------------------------------------------
+#D- Other specifications
+# --------------------------------------------------------------------
+
+    IGCM_debug_PopStack "IGCM_sys_activ_variables"
+
+}
+
+############################################################
+# Desactivate Running Environnment Variables
+
+function IGCM_sys_desactiv_variables {
+    IGCM_debug_PushStack "IGCM_sys_desactiv_variables"
+    if ( $DEBUG_sys ) ; then
+	echo "IGCM_sys_desactiv_variables "
+    fi
+# --------------------------------------------------------------------
+#D- MPI specifications
+# --------------------------------------------------------------------
+
+# --------------------------------------------------------------------
+#D- Other specifications
+# --------------------------------------------------------------------
+
+    IGCM_debug_PopStack "IGCM_sys_desactiv_variables"
+  
+}
+
+############################################################
+# Build run file
+
+function IGCM_sys_build_run_file {
+    IGCM_debug_PushStack "IGCM_sys_build_run_file" $@
+set -x
+    if ( $DEBUG_sys ) ; then
+	echo "IGCM_sys_build_run_file " $@
+    fi
+
+    NUM_PROC_OASIS=1
+
+    # Set the number of processors for OCE here
+    NUM_PROC_OCE=5
+
+    (( NUM_PROC_ATM = BATCH_NUM_PROC_TOT - NUM_PROC_OASIS - NUM_PROC_OCE ))
+    
+    if [ $1 = MPI2 ]; then
+       echo "IGCM_sys_build_run_file : error - MPI2 not available on iitm. "
+       IGCM_debug_Exit "IGCM_sys_build_run_file"
+    elif [ $1 = MPI1 ]; then
+	cat <<EOF > run_file
+./oasis
+EOF
+
+	typeset i
+	(( i = 0 ))
+	while [ ${i} -lt ${NUM_PROC_ATM} ] ; do
+	    (( i = i + 1 ))
+	    cat <<EOF >> run_file
+./lmdz.x
+EOF
+	done
+
+        (( i = 0 ))
+        while [ ${i} -lt ${NUM_PROC_OCE} ] ; do
+            (( i = i + 1 ))
+	    cat <<EOF >> run_file
+./opa.xx
+EOF
+        done
+
+	wc -l run_file
+    fi
+set +x
+    IGCM_debug_PopStack "IGCM_sys_build_run_file"
+}
