New URL for NEMO forge!   http://forge.nemo-ocean.eu

Since March 2022 along with NEMO 4.2 release, the code development moved to a self-hosted GitLab.
This present forge is now archived and remained online for history.
sbccpl.F90 in NEMO/branches/2019/ENHANCE-02_ISF_nemo/src/OCE/SBC – NEMO

source: NEMO/branches/2019/ENHANCE-02_ISF_nemo/src/OCE/SBC/sbccpl.F90 @ 11423

Last change on this file since 11423 was 11423, checked in by mathiot, 5 years ago

ENHANCE-02_ISF_nemo : add UKESM ice sheet coupling method (ticket #2142)

  • Property svn:keywords set to Id
File size: 152.1 KB
Line 
1MODULE sbccpl
2   !!======================================================================
3   !!                       ***  MODULE  sbccpl  ***
4   !! Surface Boundary Condition :  momentum, heat and freshwater fluxes in coupled mode
5   !!======================================================================
6   !! History :  2.0  ! 2007-06  (R. Redler, N. Keenlyside, W. Park) Original code split into flxmod & taumod
7   !!            3.0  ! 2008-02  (G. Madec, C Talandier)  surface module
8   !!            3.1  ! 2009_02  (G. Madec, S. Masson, E. Maisonave, A. Caubel) generic coupled interface
9   !!            3.4  ! 2011_11  (C. Harris) more flexibility + multi-category fields
10   !!----------------------------------------------------------------------
11
12   !!----------------------------------------------------------------------
13   !!   namsbc_cpl      : coupled formulation namlist
14   !!   sbc_cpl_init    : initialisation of the coupled exchanges
15   !!   sbc_cpl_rcv     : receive fields from the atmosphere over the ocean (ocean only)
16   !!                     receive stress from the atmosphere over the ocean (ocean-ice case)
17   !!   sbc_cpl_ice_tau : receive stress from the atmosphere over ice
18   !!   sbc_cpl_ice_flx : receive fluxes from the atmosphere over ice
19   !!   sbc_cpl_snd     : send     fields to the atmosphere
20   !!----------------------------------------------------------------------
21   USE dom_oce         ! ocean space and time domain
22   USE sbc_oce         ! Surface boundary condition: ocean fields
23   USE trc_oce         ! share SMS/Ocean variables
24   USE sbc_ice         ! Surface boundary condition: ice fields
25   USE sbcapr          ! Stochastic param. : ???
26   USE sbcdcy          ! surface boundary condition: diurnal cycle
27   USE sbcwave         ! surface boundary condition: waves
28   USE phycst          ! physical constants
29#if defined key_si3
30   USE ice            ! ice variables
31#endif
32   USE cpl_oasis3     ! OASIS3 coupling
33   USE geo2ocean      !
34   USE oce     , ONLY : tsn, un, vn, sshn, ub, vb, sshb, fraqsr_1lev
35   USE ocealb         !
36   USE eosbn2         !
37   USE sbcrnf  , ONLY : l_rnfcpl
38   USE isf     , ONLY : l_isfoasis, fwfisf_oasis
39#if defined key_cice
40   USE ice_domain_size, only: ncat
41#endif
42#if defined key_si3
43   USE icethd_dh      ! for CALL ice_thd_snwblow
44#endif
45   !
46   USE in_out_manager ! I/O manager
47   USE iom            ! NetCDF library
48   USE lib_mpp        ! distribued memory computing library
49   USE lbclnk         ! ocean lateral boundary conditions (or mpp link)
50
51   IMPLICIT NONE
52   PRIVATE
53
54   PUBLIC   sbc_cpl_init      ! routine called by sbcmod.F90
55   PUBLIC   sbc_cpl_rcv       ! routine called by icestp.F90
56   PUBLIC   sbc_cpl_snd       ! routine called by step.F90
57   PUBLIC   sbc_cpl_ice_tau   ! routine called by icestp.F90
58   PUBLIC   sbc_cpl_ice_flx   ! routine called by icestp.F90
59   PUBLIC   sbc_cpl_alloc     ! routine called in sbcice_cice.F90
60
61   INTEGER, PARAMETER ::   jpr_otx1   =  1   ! 3 atmosphere-ocean stress components on grid 1
62   INTEGER, PARAMETER ::   jpr_oty1   =  2   !
63   INTEGER, PARAMETER ::   jpr_otz1   =  3   !
64   INTEGER, PARAMETER ::   jpr_otx2   =  4   ! 3 atmosphere-ocean stress components on grid 2
65   INTEGER, PARAMETER ::   jpr_oty2   =  5   !
66   INTEGER, PARAMETER ::   jpr_otz2   =  6   !
67   INTEGER, PARAMETER ::   jpr_itx1   =  7   ! 3 atmosphere-ice   stress components on grid 1
68   INTEGER, PARAMETER ::   jpr_ity1   =  8   !
69   INTEGER, PARAMETER ::   jpr_itz1   =  9   !
70   INTEGER, PARAMETER ::   jpr_itx2   = 10   ! 3 atmosphere-ice   stress components on grid 2
71   INTEGER, PARAMETER ::   jpr_ity2   = 11   !
72   INTEGER, PARAMETER ::   jpr_itz2   = 12   !
73   INTEGER, PARAMETER ::   jpr_qsroce = 13   ! Qsr above the ocean
74   INTEGER, PARAMETER ::   jpr_qsrice = 14   ! Qsr above the ice
75   INTEGER, PARAMETER ::   jpr_qsrmix = 15 
76   INTEGER, PARAMETER ::   jpr_qnsoce = 16   ! Qns above the ocean
77   INTEGER, PARAMETER ::   jpr_qnsice = 17   ! Qns above the ice
78   INTEGER, PARAMETER ::   jpr_qnsmix = 18
79   INTEGER, PARAMETER ::   jpr_rain   = 19   ! total liquid precipitation (rain)
80   INTEGER, PARAMETER ::   jpr_snow   = 20   ! solid precipitation over the ocean (snow)
81   INTEGER, PARAMETER ::   jpr_tevp   = 21   ! total evaporation
82   INTEGER, PARAMETER ::   jpr_ievp   = 22   ! solid evaporation (sublimation)
83   INTEGER, PARAMETER ::   jpr_sbpr   = 23   ! sublimation - liquid precipitation - solid precipitation
84   INTEGER, PARAMETER ::   jpr_semp   = 24   ! solid freshwater budget (sublimation - snow)
85   INTEGER, PARAMETER ::   jpr_oemp   = 25   ! ocean freshwater budget (evap - precip)
86   INTEGER, PARAMETER ::   jpr_w10m   = 26   ! 10m wind
87   INTEGER, PARAMETER ::   jpr_dqnsdt = 27   ! d(Q non solar)/d(temperature)
88   INTEGER, PARAMETER ::   jpr_rnf    = 28   ! runoffs
89   INTEGER, PARAMETER ::   jpr_cal    = 29   ! calving
90   INTEGER, PARAMETER ::   jpr_taum   = 30   ! wind stress module
91   INTEGER, PARAMETER ::   jpr_co2    = 31
92   INTEGER, PARAMETER ::   jpr_topm   = 32   ! topmeltn
93   INTEGER, PARAMETER ::   jpr_botm   = 33   ! botmeltn
94   INTEGER, PARAMETER ::   jpr_sflx   = 34   ! salt flux
95   INTEGER, PARAMETER ::   jpr_toce   = 35   ! ocean temperature
96   INTEGER, PARAMETER ::   jpr_soce   = 36   ! ocean salinity
97   INTEGER, PARAMETER ::   jpr_ocx1   = 37   ! ocean current on grid 1
98   INTEGER, PARAMETER ::   jpr_ocy1   = 38   !
99   INTEGER, PARAMETER ::   jpr_ssh    = 39   ! sea surface height
100   INTEGER, PARAMETER ::   jpr_fice   = 40   ! ice fraction         
101   INTEGER, PARAMETER ::   jpr_e3t1st = 41   ! first T level thickness
102   INTEGER, PARAMETER ::   jpr_fraqsr = 42   ! fraction of solar net radiation absorbed in the first ocean level
103   INTEGER, PARAMETER ::   jpr_mslp   = 43   ! mean sea level pressure
104   INTEGER, PARAMETER ::   jpr_hsig   = 44   ! Hsig
105   INTEGER, PARAMETER ::   jpr_phioc  = 45   ! Wave=>ocean energy flux
106   INTEGER, PARAMETER ::   jpr_sdrftx = 46   ! Stokes drift on grid 1
107   INTEGER, PARAMETER ::   jpr_sdrfty = 47   ! Stokes drift on grid 2
108   INTEGER, PARAMETER ::   jpr_wper   = 48   ! Mean wave period
109   INTEGER, PARAMETER ::   jpr_wnum   = 49   ! Mean wavenumber
110   INTEGER, PARAMETER ::   jpr_tauwoc = 50   ! Stress fraction adsorbed by waves
111   INTEGER, PARAMETER ::   jpr_wdrag  = 51   ! Neutral surface drag coefficient
112   INTEGER, PARAMETER ::   jpr_isf    = 52
113   INTEGER, PARAMETER ::   jpr_icb    = 53
114   INTEGER, PARAMETER ::   jpr_wfreq  = 54   ! Wave peak frequency
115   INTEGER, PARAMETER ::   jpr_tauwx  = 55   ! x component of the ocean stress from waves
116   INTEGER, PARAMETER ::   jpr_tauwy  = 56   ! y component of the ocean stress from waves
117   INTEGER, PARAMETER ::   jpr_ts_ice = 57   ! Sea ice surface temp
118
119   INTEGER, PARAMETER ::   jprcv      = 57   ! total number of fields received 
120
121   INTEGER, PARAMETER ::   jps_fice   =  1   ! ice fraction sent to the atmosphere
122   INTEGER, PARAMETER ::   jps_toce   =  2   ! ocean temperature
123   INTEGER, PARAMETER ::   jps_tice   =  3   ! ice   temperature
124   INTEGER, PARAMETER ::   jps_tmix   =  4   ! mixed temperature (ocean+ice)
125   INTEGER, PARAMETER ::   jps_albice =  5   ! ice   albedo
126   INTEGER, PARAMETER ::   jps_albmix =  6   ! mixed albedo
127   INTEGER, PARAMETER ::   jps_hice   =  7   ! ice  thickness
128   INTEGER, PARAMETER ::   jps_hsnw   =  8   ! snow thickness
129   INTEGER, PARAMETER ::   jps_ocx1   =  9   ! ocean current on grid 1
130   INTEGER, PARAMETER ::   jps_ocy1   = 10   !
131   INTEGER, PARAMETER ::   jps_ocz1   = 11   !
132   INTEGER, PARAMETER ::   jps_ivx1   = 12   ! ice   current on grid 1
133   INTEGER, PARAMETER ::   jps_ivy1   = 13   !
134   INTEGER, PARAMETER ::   jps_ivz1   = 14   !
135   INTEGER, PARAMETER ::   jps_co2    = 15
136   INTEGER, PARAMETER ::   jps_soce   = 16   ! ocean salinity
137   INTEGER, PARAMETER ::   jps_ssh    = 17   ! sea surface height
138   INTEGER, PARAMETER ::   jps_qsroce = 18   ! Qsr above the ocean
139   INTEGER, PARAMETER ::   jps_qnsoce = 19   ! Qns above the ocean
140   INTEGER, PARAMETER ::   jps_oemp   = 20   ! ocean freshwater budget (evap - precip)
141   INTEGER, PARAMETER ::   jps_sflx   = 21   ! salt flux
142   INTEGER, PARAMETER ::   jps_otx1   = 22   ! 2 atmosphere-ocean stress components on grid 1
143   INTEGER, PARAMETER ::   jps_oty1   = 23   !
144   INTEGER, PARAMETER ::   jps_rnf    = 24   ! runoffs
145   INTEGER, PARAMETER ::   jps_taum   = 25   ! wind stress module
146   INTEGER, PARAMETER ::   jps_fice2  = 26   ! ice fraction sent to OPA (by SAS when doing SAS-OPA coupling)
147   INTEGER, PARAMETER ::   jps_e3t1st = 27   ! first level depth (vvl)
148   INTEGER, PARAMETER ::   jps_fraqsr = 28   ! fraction of solar net radiation absorbed in the first ocean level
149   INTEGER, PARAMETER ::   jps_ficet  = 29   ! total ice fraction 
150   INTEGER, PARAMETER ::   jps_ocxw   = 30   ! currents on grid 1 
151   INTEGER, PARAMETER ::   jps_ocyw   = 31   ! currents on grid 2
152   INTEGER, PARAMETER ::   jps_wlev   = 32   ! water level
153   INTEGER, PARAMETER ::   jps_fice1  = 33   ! first-order ice concentration (for semi-implicit coupling of atmos-ice fluxes)
154   INTEGER, PARAMETER ::   jps_a_p    = 34   ! meltpond area
155   INTEGER, PARAMETER ::   jps_ht_p   = 35   ! meltpond thickness
156   INTEGER, PARAMETER ::   jps_kice   = 36   ! sea ice effective conductivity
157   INTEGER, PARAMETER ::   jps_sstfrz = 37   ! sea surface freezing temperature
158   INTEGER, PARAMETER ::   jps_ttilyr = 38   ! sea ice top layer temp
159
160   INTEGER, PARAMETER ::   jpsnd      = 38   ! total number of fields sent
161
162   !                                  !!** namelist namsbc_cpl **
163   TYPE ::   FLD_C                     !   
164      CHARACTER(len = 32) ::   cldes      ! desciption of the coupling strategy
165      CHARACTER(len = 32) ::   clcat      ! multiple ice categories strategy
166      CHARACTER(len = 32) ::   clvref     ! reference of vector ('spherical' or 'cartesian')
167      CHARACTER(len = 32) ::   clvor      ! orientation of vector fields ('eastward-northward' or 'local grid')
168      CHARACTER(len = 32) ::   clvgrd     ! grids on which is located the vector fields
169   END TYPE FLD_C
170   !                                   ! Send to the atmosphere 
171   TYPE(FLD_C) ::   sn_snd_temp  , sn_snd_alb , sn_snd_thick, sn_snd_crt   , sn_snd_co2,  &
172      &             sn_snd_thick1, sn_snd_cond, sn_snd_mpnd , sn_snd_sstfrz, sn_snd_ttilyr
173   !                                   ! Received from the atmosphere
174   TYPE(FLD_C) ::   sn_rcv_w10m, sn_rcv_taumod, sn_rcv_tau, sn_rcv_tauw, sn_rcv_dqnsdt, sn_rcv_qsr,  &
175      &             sn_rcv_qns , sn_rcv_emp   , sn_rcv_rnf, sn_rcv_ts_ice
176   TYPE(FLD_C) ::   sn_rcv_cal, sn_rcv_iceflx, sn_rcv_co2, sn_rcv_mslp, sn_rcv_icb, sn_rcv_isf
177   ! Send to waves
178   TYPE(FLD_C) ::   sn_snd_ifrac, sn_snd_crtw, sn_snd_wlev 
179   ! Received from waves
180   TYPE(FLD_C) ::   sn_rcv_hsig, sn_rcv_phioc, sn_rcv_sdrfx, sn_rcv_sdrfy, sn_rcv_wper, sn_rcv_wnum, sn_rcv_tauwoc, &
181                    sn_rcv_wdrag, sn_rcv_wfreq
182   !                                   ! Other namelist parameters
183   INTEGER     ::   nn_cplmodel           ! Maximum number of models to/from which NEMO is potentialy sending/receiving data
184   LOGICAL     ::   ln_usecplmask         !  use a coupling mask file to merge data received from several models
185                                          !   -> file cplmask.nc with the float variable called cplmask (jpi,jpj,nn_cplmodel)
186   TYPE ::   DYNARR     
187      REAL(wp), POINTER, DIMENSION(:,:,:) ::   z3   
188   END TYPE DYNARR
189
190   TYPE( DYNARR ), SAVE, DIMENSION(jprcv) ::   frcv                ! all fields recieved from the atmosphere
191
192   REAL(wp), ALLOCATABLE, SAVE, DIMENSION(:,:) ::   alb_oce_mix    ! ocean albedo sent to atmosphere (mix clear/overcast sky)
193
194   REAL(wp) ::   rpref = 101000._wp   ! reference atmospheric pressure[N/m2]
195   REAL(wp) ::   r1_grau              ! = 1.e0 / (grav * rau0)
196
197   INTEGER , ALLOCATABLE, SAVE, DIMENSION(:) ::   nrcvinfo           ! OASIS info argument
198
199   !! Substitution
200#  include "vectopt_loop_substitute.h90"
201   !!----------------------------------------------------------------------
202   !! NEMO/OCE 4.0 , NEMO Consortium (2018)
203   !! $Id$
204   !! Software governed by the CeCILL license (see ./LICENSE)
205   !!----------------------------------------------------------------------
206CONTAINS
207 
208   INTEGER FUNCTION sbc_cpl_alloc()
209      !!----------------------------------------------------------------------
210      !!             ***  FUNCTION sbc_cpl_alloc  ***
211      !!----------------------------------------------------------------------
212      INTEGER :: ierr(4)
213      !!----------------------------------------------------------------------
214      ierr(:) = 0
215      !
216      ALLOCATE( alb_oce_mix(jpi,jpj), nrcvinfo(jprcv),  STAT=ierr(1) )
217     
218#if ! defined key_si3 && ! defined key_cice
219      ALLOCATE( a_i(jpi,jpj,1) , STAT=ierr(2) )  ! used in sbcice_if.F90 (done here as there is no sbc_ice_if_init)
220#endif
221      ALLOCATE( xcplmask(jpi,jpj,0:nn_cplmodel) , STAT=ierr(3) )
222      !
223      IF( .NOT. ln_apr_dyn ) ALLOCATE( ssh_ib(jpi,jpj), ssh_ibb(jpi,jpj), apr(jpi, jpj), STAT=ierr(4) ) 
224
225      sbc_cpl_alloc = MAXVAL( ierr )
226      CALL mpp_sum ( 'sbccpl', sbc_cpl_alloc )
227      IF( sbc_cpl_alloc > 0 )   CALL ctl_warn('sbc_cpl_alloc: allocation of arrays failed')
228      !
229   END FUNCTION sbc_cpl_alloc
230
231
232   SUBROUTINE sbc_cpl_init( k_ice )     
233      !!----------------------------------------------------------------------
234      !!             ***  ROUTINE sbc_cpl_init  ***
235      !!
236      !! ** Purpose :   Initialisation of send and received information from
237      !!                the atmospheric component
238      !!
239      !! ** Method  : * Read namsbc_cpl namelist
240      !!              * define the receive interface
241      !!              * define the send    interface
242      !!              * initialise the OASIS coupler
243      !!----------------------------------------------------------------------
244      INTEGER, INTENT(in) ::   k_ice   ! ice management in the sbc (=0/1/2/3)
245      !
246      INTEGER ::   jn          ! dummy loop index
247      INTEGER ::   ios, inum   ! Local integer
248      REAL(wp), DIMENSION(jpi,jpj) ::   zacs, zaos
249      !!
250      NAMELIST/namsbc_cpl/  sn_snd_temp  , sn_snd_alb   , sn_snd_thick, sn_snd_crt   , sn_snd_co2  ,   & 
251         &                  sn_snd_ttilyr, sn_snd_cond  , sn_snd_mpnd , sn_snd_sstfrz, sn_snd_thick1,  & 
252         &                  sn_snd_ifrac , sn_snd_crtw  , sn_snd_wlev , sn_rcv_hsig  , sn_rcv_phioc,   & 
253         &                  sn_rcv_w10m  , sn_rcv_taumod, sn_rcv_tau  , sn_rcv_dqnsdt, sn_rcv_qsr  ,   & 
254         &                  sn_rcv_sdrfx , sn_rcv_sdrfy , sn_rcv_wper , sn_rcv_wnum  , sn_rcv_tauwoc,  &
255         &                  sn_rcv_wdrag , sn_rcv_qns   , sn_rcv_emp  , sn_rcv_rnf   , sn_rcv_cal  ,   &
256         &                  sn_rcv_iceflx, sn_rcv_co2   , nn_cplmodel , ln_usecplmask, sn_rcv_mslp ,   &
257         &                  sn_rcv_icb   , sn_rcv_isf   , sn_rcv_wfreq , sn_rcv_tauw, nn_cats_cpl  ,   &
258         &                  sn_rcv_ts_ice
259
260      !!---------------------------------------------------------------------
261      !
262      ! ================================ !
263      !      Namelist informations       !
264      ! ================================ !
265      !
266      REWIND( numnam_ref )              ! Namelist namsbc_cpl in reference namelist : Variables for OASIS coupling
267      READ  ( numnam_ref, namsbc_cpl, IOSTAT = ios, ERR = 901)
268901   IF( ios /= 0 )   CALL ctl_nam ( ios , 'namsbc_cpl in reference namelist', lwp )
269      !
270      REWIND( numnam_cfg )              ! Namelist namsbc_cpl in configuration namelist : Variables for OASIS coupling
271      READ  ( numnam_cfg, namsbc_cpl, IOSTAT = ios, ERR = 902 )
272902   IF( ios >  0 )   CALL ctl_nam ( ios , 'namsbc_cpl in configuration namelist', lwp )
273      IF(lwm) WRITE ( numond, namsbc_cpl )
274      !
275      IF(lwp) THEN                        ! control print
276         WRITE(numout,*)
277         WRITE(numout,*)'sbc_cpl_init : namsbc_cpl namelist '
278         WRITE(numout,*)'~~~~~~~~~~~~'
279      ENDIF
280      IF( lwp .AND. ln_cpl ) THEN                        ! control print
281         WRITE(numout,*)'  received fields (mutiple ice categogies)'
282         WRITE(numout,*)'      10m wind module                 = ', TRIM(sn_rcv_w10m%cldes  ), ' (', TRIM(sn_rcv_w10m%clcat  ), ')'
283         WRITE(numout,*)'      stress module                   = ', TRIM(sn_rcv_taumod%cldes), ' (', TRIM(sn_rcv_taumod%clcat), ')'
284         WRITE(numout,*)'      surface stress                  = ', TRIM(sn_rcv_tau%cldes   ), ' (', TRIM(sn_rcv_tau%clcat   ), ')'
285         WRITE(numout,*)'                     - referential    = ', sn_rcv_tau%clvref
286         WRITE(numout,*)'                     - orientation    = ', sn_rcv_tau%clvor
287         WRITE(numout,*)'                     - mesh           = ', sn_rcv_tau%clvgrd
288         WRITE(numout,*)'      non-solar heat flux sensitivity = ', TRIM(sn_rcv_dqnsdt%cldes), ' (', TRIM(sn_rcv_dqnsdt%clcat), ')'
289         WRITE(numout,*)'      solar heat flux                 = ', TRIM(sn_rcv_qsr%cldes   ), ' (', TRIM(sn_rcv_qsr%clcat   ), ')'
290         WRITE(numout,*)'      non-solar heat flux             = ', TRIM(sn_rcv_qns%cldes   ), ' (', TRIM(sn_rcv_qns%clcat   ), ')'
291         WRITE(numout,*)'      freshwater budget               = ', TRIM(sn_rcv_emp%cldes   ), ' (', TRIM(sn_rcv_emp%clcat   ), ')'
292         WRITE(numout,*)'      runoffs                         = ', TRIM(sn_rcv_rnf%cldes   ), ' (', TRIM(sn_rcv_rnf%clcat   ), ')'
293         WRITE(numout,*)'      calving                         = ', TRIM(sn_rcv_cal%cldes   ), ' (', TRIM(sn_rcv_cal%clcat   ), ')'
294         WRITE(numout,*)'      iceberg                         = ', TRIM(sn_rcv_icb%cldes   ), ' (', TRIM(sn_rcv_icb%clcat   ), ')'
295         WRITE(numout,*)'      ice shelf                       = ', TRIM(sn_rcv_isf%cldes   ), ' (', TRIM(sn_rcv_isf%clcat   ), ')'
296         WRITE(numout,*)'      sea ice heat fluxes             = ', TRIM(sn_rcv_iceflx%cldes), ' (', TRIM(sn_rcv_iceflx%clcat), ')'
297         WRITE(numout,*)'      atm co2                         = ', TRIM(sn_rcv_co2%cldes   ), ' (', TRIM(sn_rcv_co2%clcat   ), ')'
298         WRITE(numout,*)'      significant wave heigth         = ', TRIM(sn_rcv_hsig%cldes  ), ' (', TRIM(sn_rcv_hsig%clcat  ), ')' 
299         WRITE(numout,*)'      wave to oce energy flux         = ', TRIM(sn_rcv_phioc%cldes ), ' (', TRIM(sn_rcv_phioc%clcat ), ')' 
300         WRITE(numout,*)'      Surface Stokes drift grid u     = ', TRIM(sn_rcv_sdrfx%cldes ), ' (', TRIM(sn_rcv_sdrfx%clcat ), ')' 
301         WRITE(numout,*)'      Surface Stokes drift grid v     = ', TRIM(sn_rcv_sdrfy%cldes ), ' (', TRIM(sn_rcv_sdrfy%clcat ), ')' 
302         WRITE(numout,*)'      Mean wave period                = ', TRIM(sn_rcv_wper%cldes  ), ' (', TRIM(sn_rcv_wper%clcat  ), ')' 
303         WRITE(numout,*)'      Mean wave number                = ', TRIM(sn_rcv_wnum%cldes  ), ' (', TRIM(sn_rcv_wnum%clcat  ), ')' 
304         WRITE(numout,*)'      Wave peak frequency             = ', TRIM(sn_rcv_wfreq%cldes ), ' (', TRIM(sn_rcv_wfreq%clcat ), ')'
305         WRITE(numout,*)'      Stress frac adsorbed by waves   = ', TRIM(sn_rcv_tauwoc%cldes), ' (', TRIM(sn_rcv_tauwoc%clcat ), ')' 
306         WRITE(numout,*)'      Stress components by waves      = ', TRIM(sn_rcv_tauw%cldes  ), ' (', TRIM(sn_rcv_tauw%clcat  ), ')'
307         WRITE(numout,*)'      Neutral surf drag coefficient   = ', TRIM(sn_rcv_wdrag%cldes ), ' (', TRIM(sn_rcv_wdrag%clcat ), ')' 
308         WRITE(numout,*)'      Sea ice surface skin temperature= ', TRIM(sn_rcv_ts_ice%cldes), ' (', TRIM(sn_rcv_ts_ice%clcat), ')' 
309         WRITE(numout,*)'  sent fields (multiple ice categories)'
310         WRITE(numout,*)'      surface temperature             = ', TRIM(sn_snd_temp%cldes  ), ' (', TRIM(sn_snd_temp%clcat  ), ')'
311         WRITE(numout,*)'      top ice layer temperature       = ', TRIM(sn_snd_ttilyr%cldes), ' (', TRIM(sn_snd_ttilyr%clcat), ')'
312         WRITE(numout,*)'      albedo                          = ', TRIM(sn_snd_alb%cldes   ), ' (', TRIM(sn_snd_alb%clcat   ), ')'
313         WRITE(numout,*)'      ice/snow thickness              = ', TRIM(sn_snd_thick%cldes ), ' (', TRIM(sn_snd_thick%clcat ), ')'
314         WRITE(numout,*)'      total ice fraction              = ', TRIM(sn_snd_ifrac%cldes ), ' (', TRIM(sn_snd_ifrac%clcat ), ')' 
315         WRITE(numout,*)'      surface current                 = ', TRIM(sn_snd_crt%cldes   ), ' (', TRIM(sn_snd_crt%clcat   ), ')'
316         WRITE(numout,*)'                      - referential   = ', sn_snd_crt%clvref 
317         WRITE(numout,*)'                      - orientation   = ', sn_snd_crt%clvor
318         WRITE(numout,*)'                      - mesh          = ', sn_snd_crt%clvgrd
319         WRITE(numout,*)'      oce co2 flux                    = ', TRIM(sn_snd_co2%cldes   ), ' (', TRIM(sn_snd_co2%clcat   ), ')'
320         WRITE(numout,*)'      ice effective conductivity      = ', TRIM(sn_snd_cond%cldes  ), ' (', TRIM(sn_snd_cond%clcat  ), ')'
321         WRITE(numout,*)'      meltponds fraction and depth    = ', TRIM(sn_snd_mpnd%cldes  ), ' (', TRIM(sn_snd_mpnd%clcat  ), ')'
322         WRITE(numout,*)'      sea surface freezing temp       = ', TRIM(sn_snd_sstfrz%cldes), ' (', TRIM(sn_snd_sstfrz%clcat), ')'
323         WRITE(numout,*)'      water level                     = ', TRIM(sn_snd_wlev%cldes  ), ' (', TRIM(sn_snd_wlev%clcat  ), ')' 
324         WRITE(numout,*)'      mean sea level pressure         = ', TRIM(sn_rcv_mslp%cldes  ), ' (', TRIM(sn_rcv_mslp%clcat  ), ')' 
325         WRITE(numout,*)'      surface current to waves        = ', TRIM(sn_snd_crtw%cldes  ), ' (', TRIM(sn_snd_crtw%clcat  ), ')' 
326         WRITE(numout,*)'                      - referential   = ', sn_snd_crtw%clvref 
327         WRITE(numout,*)'                      - orientation   = ', sn_snd_crtw%clvor 
328         WRITE(numout,*)'                      - mesh          = ', sn_snd_crtw%clvgrd 
329         WRITE(numout,*)'  nn_cplmodel                         = ', nn_cplmodel
330         WRITE(numout,*)'  ln_usecplmask                       = ', ln_usecplmask
331         WRITE(numout,*)'  nn_cats_cpl                         = ', nn_cats_cpl
332      ENDIF
333
334      !                                   ! allocate sbccpl arrays
335      IF( sbc_cpl_alloc() /= 0 )   CALL ctl_stop( 'STOP', 'sbc_cpl_alloc : unable to allocate arrays' )
336     
337      ! ================================ !
338      !   Define the receive interface   !
339      ! ================================ !
340      nrcvinfo(:) = OASIS_idle   ! needed by nrcvinfo(jpr_otx1) if we do not receive ocean stress
341
342      ! for each field: define the OASIS name                              (srcv(:)%clname)
343      !                 define receive or not from the namelist parameters (srcv(:)%laction)
344      !                 define the north fold type of lbc                  (srcv(:)%nsgn)
345
346      ! default definitions of srcv
347      srcv(:)%laction = .FALSE.   ;   srcv(:)%clgrid = 'T'   ;   srcv(:)%nsgn = 1.   ;   srcv(:)%nct = 1
348
349      !                                                      ! ------------------------- !
350      !                                                      ! ice and ocean wind stress !   
351      !                                                      ! ------------------------- !
352      !                                                           ! Name
353      srcv(jpr_otx1)%clname = 'O_OTaux1'      ! 1st ocean component on grid ONE (T or U)
354      srcv(jpr_oty1)%clname = 'O_OTauy1'      ! 2nd   -      -         -     -
355      srcv(jpr_otz1)%clname = 'O_OTauz1'      ! 3rd   -      -         -     -
356      srcv(jpr_otx2)%clname = 'O_OTaux2'      ! 1st ocean component on grid TWO (V)
357      srcv(jpr_oty2)%clname = 'O_OTauy2'      ! 2nd   -      -         -     -
358      srcv(jpr_otz2)%clname = 'O_OTauz2'      ! 3rd   -      -         -     -
359      !
360      srcv(jpr_itx1)%clname = 'O_ITaux1'      ! 1st  ice  component on grid ONE (T, F, I or U)
361      srcv(jpr_ity1)%clname = 'O_ITauy1'      ! 2nd   -      -         -     -
362      srcv(jpr_itz1)%clname = 'O_ITauz1'      ! 3rd   -      -         -     -
363      srcv(jpr_itx2)%clname = 'O_ITaux2'      ! 1st  ice  component on grid TWO (V)
364      srcv(jpr_ity2)%clname = 'O_ITauy2'      ! 2nd   -      -         -     -
365      srcv(jpr_itz2)%clname = 'O_ITauz2'      ! 3rd   -      -         -     -
366      !
367      ! Vectors: change of sign at north fold ONLY if on the local grid
368      IF( TRIM( sn_rcv_tau%cldes ) == 'oce only' .OR. TRIM(sn_rcv_tau%cldes ) == 'oce and ice') THEN ! avoid working with the atmospheric fields if they are not coupled
369      IF( TRIM( sn_rcv_tau%clvor ) == 'local grid' )   srcv(jpr_otx1:jpr_itz2)%nsgn = -1.
370     
371      !                                                           ! Set grid and action
372      SELECT CASE( TRIM( sn_rcv_tau%clvgrd ) )      !  'T', 'U,V', 'U,V,I', 'U,V,F', 'T,I', 'T,F', or 'T,U,V'
373      CASE( 'T' ) 
374         srcv(jpr_otx1:jpr_itz2)%clgrid  = 'T'        ! oce and ice components given at T-point
375         srcv(jpr_otx1:jpr_otz1)%laction = .TRUE.     ! receive oce components on grid 1
376         srcv(jpr_itx1:jpr_itz1)%laction = .TRUE.     ! receive ice components on grid 1
377      CASE( 'U,V' ) 
378         srcv(jpr_otx1:jpr_otz1)%clgrid  = 'U'        ! oce components given at U-point
379         srcv(jpr_otx2:jpr_otz2)%clgrid  = 'V'        !           and           V-point
380         srcv(jpr_itx1:jpr_itz1)%clgrid  = 'U'        ! ice components given at U-point
381         srcv(jpr_itx2:jpr_itz2)%clgrid  = 'V'        !           and           V-point
382         srcv(jpr_otx1:jpr_itz2)%laction = .TRUE.     ! receive oce and ice components on both grid 1 & 2
383      CASE( 'U,V,T' )
384         srcv(jpr_otx1:jpr_otz1)%clgrid  = 'U'        ! oce components given at U-point
385         srcv(jpr_otx2:jpr_otz2)%clgrid  = 'V'        !           and           V-point
386         srcv(jpr_itx1:jpr_itz1)%clgrid  = 'T'        ! ice components given at T-point
387         srcv(jpr_otx1:jpr_otz2)%laction = .TRUE.     ! receive oce components on grid 1 & 2
388         srcv(jpr_itx1:jpr_itz1)%laction = .TRUE.     ! receive ice components on grid 1 only
389      CASE( 'U,V,I' )
390         srcv(jpr_otx1:jpr_otz1)%clgrid  = 'U'        ! oce components given at U-point
391         srcv(jpr_otx2:jpr_otz2)%clgrid  = 'V'        !           and           V-point
392         srcv(jpr_itx1:jpr_itz1)%clgrid  = 'I'        ! ice components given at I-point
393         srcv(jpr_otx1:jpr_otz2)%laction = .TRUE.     ! receive oce components on grid 1 & 2
394         srcv(jpr_itx1:jpr_itz1)%laction = .TRUE.     ! receive ice components on grid 1 only
395      CASE( 'U,V,F' )
396         srcv(jpr_otx1:jpr_otz1)%clgrid  = 'U'        ! oce components given at U-point
397         srcv(jpr_otx2:jpr_otz2)%clgrid  = 'V'        !           and           V-point
398         srcv(jpr_itx1:jpr_itz1)%clgrid  = 'F'        ! ice components given at F-point
399         srcv(jpr_otx1:jpr_otz2)%laction = .TRUE.     ! receive oce components on grid 1 & 2
400         srcv(jpr_itx1:jpr_itz1)%laction = .TRUE.     ! receive ice components on grid 1 only
401      CASE( 'T,I' ) 
402         srcv(jpr_otx1:jpr_itz2)%clgrid  = 'T'        ! oce and ice components given at T-point
403         srcv(jpr_itx1:jpr_itz1)%clgrid  = 'I'        ! ice components given at I-point
404         srcv(jpr_otx1:jpr_otz1)%laction = .TRUE.     ! receive oce components on grid 1
405         srcv(jpr_itx1:jpr_itz1)%laction = .TRUE.     ! receive ice components on grid 1
406      CASE( 'T,F' ) 
407         srcv(jpr_otx1:jpr_itz2)%clgrid  = 'T'        ! oce and ice components given at T-point
408         srcv(jpr_itx1:jpr_itz1)%clgrid  = 'F'        ! ice components given at F-point
409         srcv(jpr_otx1:jpr_otz1)%laction = .TRUE.     ! receive oce components on grid 1
410         srcv(jpr_itx1:jpr_itz1)%laction = .TRUE.     ! receive ice components on grid 1
411      CASE( 'T,U,V' )
412         srcv(jpr_otx1:jpr_otz1)%clgrid  = 'T'        ! oce components given at T-point
413         srcv(jpr_itx1:jpr_itz1)%clgrid  = 'U'        ! ice components given at U-point
414         srcv(jpr_itx2:jpr_itz2)%clgrid  = 'V'        !           and           V-point
415         srcv(jpr_otx1:jpr_otz1)%laction = .TRUE.     ! receive oce components on grid 1 only
416         srcv(jpr_itx1:jpr_itz2)%laction = .TRUE.     ! receive ice components on grid 1 & 2
417      CASE default   
418         CALL ctl_stop( 'sbc_cpl_init: wrong definition of sn_rcv_tau%clvgrd' )
419      END SELECT
420      !
421      IF( TRIM( sn_rcv_tau%clvref ) == 'spherical' )   &           ! spherical: 3rd component not received
422         &     srcv( (/jpr_otz1, jpr_otz2, jpr_itz1, jpr_itz2/) )%laction = .FALSE. 
423      !
424      IF( TRIM( sn_rcv_tau%clvor  ) == 'local grid' ) THEN        ! already on local grid -> no need of the second grid
425            srcv(jpr_otx2:jpr_otz2)%laction = .FALSE. 
426            srcv(jpr_itx2:jpr_itz2)%laction = .FALSE. 
427            srcv(jpr_oty1)%clgrid = srcv(jpr_oty2)%clgrid   ! not needed but cleaner...
428            srcv(jpr_ity1)%clgrid = srcv(jpr_ity2)%clgrid   ! not needed but cleaner...
429      ENDIF
430      !
431      IF( TRIM( sn_rcv_tau%cldes ) /= 'oce and ice' ) THEN        ! 'oce and ice' case ocean stress on ocean mesh used
432         srcv(jpr_itx1:jpr_itz2)%laction = .FALSE.    ! ice components not received
433         srcv(jpr_itx1)%clgrid = 'U'                  ! ocean stress used after its transformation
434         srcv(jpr_ity1)%clgrid = 'V'                  ! i.e. it is always at U- & V-points for i- & j-comp. resp.
435      ENDIF
436      ENDIF
437
438      !                                                      ! ------------------------- !
439      !                                                      !    freshwater budget      !   E-P
440      !                                                      ! ------------------------- !
441      ! we suppose that atmosphere modele do not make the difference between precipiration (liquide or solid)
442      ! over ice of free ocean within the same atmospheric cell.cd
443      srcv(jpr_rain)%clname = 'OTotRain'      ! Rain = liquid precipitation
444      srcv(jpr_snow)%clname = 'OTotSnow'      ! Snow = solid precipitation
445      srcv(jpr_tevp)%clname = 'OTotEvap'      ! total evaporation (over oce + ice sublimation)
446      srcv(jpr_ievp)%clname = 'OIceEvap'      ! evaporation over ice = sublimation
447      srcv(jpr_sbpr)%clname = 'OSubMPre'      ! sublimation - liquid precipitation - solid precipitation
448      srcv(jpr_semp)%clname = 'OISubMSn'      ! ice solid water budget = sublimation - solid precipitation
449      srcv(jpr_oemp)%clname = 'OOEvaMPr'      ! ocean water budget = ocean Evap - ocean precip
450      SELECT CASE( TRIM( sn_rcv_emp%cldes ) )
451      CASE( 'none'          )       ! nothing to do
452      CASE( 'oce only'      )   ;   srcv(jpr_oemp)%laction = .TRUE. 
453      CASE( 'conservative'  )
454         srcv( (/jpr_rain, jpr_snow, jpr_ievp, jpr_tevp/) )%laction = .TRUE.
455         IF ( k_ice <= 1 )  srcv(jpr_ievp)%laction = .FALSE.
456      CASE( 'oce and ice'   )   ;   srcv( (/jpr_ievp, jpr_sbpr, jpr_semp, jpr_oemp/) )%laction = .TRUE.
457      CASE default              ;   CALL ctl_stop( 'sbc_cpl_init: wrong definition of sn_rcv_emp%cldes' )
458      END SELECT
459      !
460      !                                                      ! ------------------------- !
461      !                                                      !     Runoffs & Calving     !   
462      !                                                      ! ------------------------- !
463      srcv(jpr_rnf   )%clname = 'O_Runoff'
464      IF( TRIM( sn_rcv_rnf%cldes ) == 'coupled' ) THEN
465         srcv(jpr_rnf)%laction = .TRUE.
466         l_rnfcpl              = .TRUE.                      ! -> no need to read runoffs in sbcrnf
467         ln_rnf                = nn_components /= jp_iam_sas ! -> force to go through sbcrnf if not sas
468         IF(lwp) WRITE(numout,*)
469         IF(lwp) WRITE(numout,*) '   runoffs received from oasis -> force ln_rnf = ', ln_rnf
470      ENDIF
471      !
472      srcv(jpr_cal)%clname = 'OCalving'   ;  IF( TRIM( sn_rcv_cal%cldes) == 'coupled' )   srcv(jpr_cal)%laction = .TRUE.
473      srcv(jpr_isf)%clname = 'OIcshelf'   ;  IF( TRIM( sn_rcv_isf%cldes) == 'coupled' )   srcv(jpr_isf)%laction = .TRUE.
474      srcv(jpr_icb)%clname = 'OIceberg'   ;  IF( TRIM( sn_rcv_icb%cldes) == 'coupled' )   srcv(jpr_icb)%laction = .TRUE.
475
476      IF( srcv(jpr_isf)%laction .AND. ln_isf ) THEN
477         l_isfoasis = .TRUE.  ! -> isf fwf comes from oasis
478         IF(lwp) WRITE(numout,*)
479         IF(lwp) WRITE(numout,*) '   iceshelf received from oasis '
480         CALL ctl_stop('STOP','not coded')
481      ENDIF
482      !
483      !                                                      ! ------------------------- !
484      !                                                      !    non solar radiation    !   Qns
485      !                                                      ! ------------------------- !
486      srcv(jpr_qnsoce)%clname = 'O_QnsOce'
487      srcv(jpr_qnsice)%clname = 'O_QnsIce'
488      srcv(jpr_qnsmix)%clname = 'O_QnsMix'
489      SELECT CASE( TRIM( sn_rcv_qns%cldes ) )
490      CASE( 'none'          )       ! nothing to do
491      CASE( 'oce only'      )   ;   srcv(               jpr_qnsoce   )%laction = .TRUE.
492      CASE( 'conservative'  )   ;   srcv( (/jpr_qnsice, jpr_qnsmix/) )%laction = .TRUE.
493      CASE( 'oce and ice'   )   ;   srcv( (/jpr_qnsice, jpr_qnsoce/) )%laction = .TRUE.
494      CASE( 'mixed oce-ice' )   ;   srcv(               jpr_qnsmix   )%laction = .TRUE. 
495      CASE default              ;   CALL ctl_stop( 'sbc_cpl_init: wrong definition of sn_rcv_qns%cldes' )
496      END SELECT
497      IF( TRIM( sn_rcv_qns%cldes ) == 'mixed oce-ice' .AND. nn_cats_cpl > 1 ) &
498         CALL ctl_stop( 'sbc_cpl_init: sn_rcv_qns%cldes not currently allowed to be mixed oce-ice for multi-category ice' )
499      !
500      !                                                      ! ------------------------- !
501      !                                                      !    solar radiation        !   Qsr
502      !                                                      ! ------------------------- !
503      srcv(jpr_qsroce)%clname = 'O_QsrOce'
504      srcv(jpr_qsrice)%clname = 'O_QsrIce'
505      srcv(jpr_qsrmix)%clname = 'O_QsrMix'
506      SELECT CASE( TRIM( sn_rcv_qsr%cldes ) )
507      CASE( 'none'          )       ! nothing to do
508      CASE( 'oce only'      )   ;   srcv(               jpr_qsroce   )%laction = .TRUE.
509      CASE( 'conservative'  )   ;   srcv( (/jpr_qsrice, jpr_qsrmix/) )%laction = .TRUE.
510      CASE( 'oce and ice'   )   ;   srcv( (/jpr_qsrice, jpr_qsroce/) )%laction = .TRUE.
511      CASE( 'mixed oce-ice' )   ;   srcv(               jpr_qsrmix   )%laction = .TRUE. 
512      CASE default              ;   CALL ctl_stop( 'sbc_cpl_init: wrong definition of sn_rcv_qsr%cldes' )
513      END SELECT
514      IF( TRIM( sn_rcv_qsr%cldes ) == 'mixed oce-ice' .AND. nn_cats_cpl > 1 ) &
515         CALL ctl_stop( 'sbc_cpl_init: sn_rcv_qsr%cldes not currently allowed to be mixed oce-ice for multi-category ice' )
516      !
517      !                                                      ! ------------------------- !
518      !                                                      !   non solar sensitivity   !   d(Qns)/d(T)
519      !                                                      ! ------------------------- !
520      srcv(jpr_dqnsdt)%clname = 'O_dQnsdT'   
521      IF( TRIM( sn_rcv_dqnsdt%cldes ) == 'coupled' )   srcv(jpr_dqnsdt)%laction = .TRUE.
522      !
523      ! non solar sensitivity mandatory for mixed oce-ice solar radiation coupling technique
524      IF( TRIM( sn_rcv_dqnsdt%cldes ) == 'none' .AND. TRIM( sn_rcv_qns%cldes ) == 'mixed oce-ice' )  &
525         &   CALL ctl_stop( 'sbc_cpl_init: namsbc_cpl namelist mismatch between sn_rcv_qns%cldes and sn_rcv_dqnsdt%cldes' )
526      !
527      !                                                      ! ------------------------- !
528      !                                                      !      10m wind module      !   
529      !                                                      ! ------------------------- !
530      srcv(jpr_w10m)%clname = 'O_Wind10'   ;   IF( TRIM(sn_rcv_w10m%cldes  ) == 'coupled' )   srcv(jpr_w10m)%laction = .TRUE. 
531      !
532      !                                                      ! ------------------------- !
533      !                                                      !   wind stress module      !   
534      !                                                      ! ------------------------- !
535      srcv(jpr_taum)%clname = 'O_TauMod'   ;   IF( TRIM(sn_rcv_taumod%cldes) == 'coupled' )   srcv(jpr_taum)%laction = .TRUE.
536      lhftau = srcv(jpr_taum)%laction
537      !
538      !                                                      ! ------------------------- !
539      !                                                      !      Atmospheric CO2      !
540      !                                                      ! ------------------------- !
541      srcv(jpr_co2 )%clname = 'O_AtmCO2'   
542      IF( TRIM(sn_rcv_co2%cldes   ) == 'coupled' )  THEN
543         srcv(jpr_co2 )%laction = .TRUE.
544         l_co2cpl = .TRUE.
545         IF(lwp) WRITE(numout,*)
546         IF(lwp) WRITE(numout,*) '   Atmospheric pco2 received from oasis '
547         IF(lwp) WRITE(numout,*)
548      ENDIF
549      !
550      !                                                      ! ------------------------- !
551      !                                                      ! Mean Sea Level Pressure   !
552      !                                                      ! ------------------------- !
553      srcv(jpr_mslp)%clname = 'O_MSLP'     ;   IF( TRIM(sn_rcv_mslp%cldes  ) == 'coupled' )    srcv(jpr_mslp)%laction = .TRUE. 
554      !
555      !                                                      ! ------------------------- !
556      !                                                      !  ice topmelt and botmelt  !   
557      !                                                      ! ------------------------- !
558      srcv(jpr_topm )%clname = 'OTopMlt'
559      srcv(jpr_botm )%clname = 'OBotMlt'
560      IF( TRIM(sn_rcv_iceflx%cldes) == 'coupled' ) THEN
561         IF ( TRIM( sn_rcv_iceflx%clcat ) == 'yes' ) THEN
562            srcv(jpr_topm:jpr_botm)%nct = nn_cats_cpl
563         ELSE
564            CALL ctl_stop( 'sbc_cpl_init: sn_rcv_iceflx%clcat should always be set to yes currently' )
565         ENDIF
566         srcv(jpr_topm:jpr_botm)%laction = .TRUE.
567      ENDIF
568      !                                                      ! ------------------------- !
569      !                                                      !    ice skin temperature   !   
570      !                                                      ! ------------------------- !
571      srcv(jpr_ts_ice)%clname = 'OTsfIce'    ! needed by Met Office
572      IF ( TRIM( sn_rcv_ts_ice%cldes ) == 'ice' )   srcv(jpr_ts_ice)%laction = .TRUE.
573      IF ( TRIM( sn_rcv_ts_ice%clcat ) == 'yes' )   srcv(jpr_ts_ice)%nct     = nn_cats_cpl
574      IF ( TRIM( sn_rcv_emp%clcat    ) == 'yes' )   srcv(jpr_ievp)%nct       = nn_cats_cpl
575
576      !                                                      ! ------------------------- !
577      !                                                      !      Wave breaking        !   
578      !                                                      ! ------------------------- !
579      srcv(jpr_hsig)%clname  = 'O_Hsigwa'    ! significant wave height
580      IF( TRIM(sn_rcv_hsig%cldes  ) == 'coupled' )  THEN
581         srcv(jpr_hsig)%laction = .TRUE.
582         cpl_hsig = .TRUE.
583      ENDIF
584      srcv(jpr_phioc)%clname = 'O_PhiOce'    ! wave to ocean energy
585      IF( TRIM(sn_rcv_phioc%cldes ) == 'coupled' )  THEN
586         srcv(jpr_phioc)%laction = .TRUE.
587         cpl_phioc = .TRUE.
588      ENDIF
589      srcv(jpr_sdrftx)%clname = 'O_Sdrfx'    ! Stokes drift in the u direction
590      IF( TRIM(sn_rcv_sdrfx%cldes ) == 'coupled' )  THEN
591         srcv(jpr_sdrftx)%laction = .TRUE.
592         cpl_sdrftx = .TRUE.
593      ENDIF
594      srcv(jpr_sdrfty)%clname = 'O_Sdrfy'    ! Stokes drift in the v direction
595      IF( TRIM(sn_rcv_sdrfy%cldes ) == 'coupled' )  THEN
596         srcv(jpr_sdrfty)%laction = .TRUE.
597         cpl_sdrfty = .TRUE.
598      ENDIF
599      srcv(jpr_wper)%clname = 'O_WPer'       ! mean wave period
600      IF( TRIM(sn_rcv_wper%cldes  ) == 'coupled' )  THEN
601         srcv(jpr_wper)%laction = .TRUE.
602         cpl_wper = .TRUE.
603      ENDIF
604      srcv(jpr_wfreq)%clname = 'O_WFreq'     ! wave peak frequency
605      IF( TRIM(sn_rcv_wfreq%cldes ) == 'coupled' )  THEN
606         srcv(jpr_wfreq)%laction = .TRUE.
607         cpl_wfreq = .TRUE.
608      ENDIF
609      srcv(jpr_wnum)%clname = 'O_WNum'       ! mean wave number
610      IF( TRIM(sn_rcv_wnum%cldes ) == 'coupled' )  THEN
611         srcv(jpr_wnum)%laction = .TRUE.
612         cpl_wnum = .TRUE.
613      ENDIF
614      srcv(jpr_tauwoc)%clname = 'O_TauOce'   ! stress fraction adsorbed by the wave
615      IF( TRIM(sn_rcv_tauwoc%cldes ) == 'coupled' )  THEN
616         srcv(jpr_tauwoc)%laction = .TRUE.
617         cpl_tauwoc = .TRUE.
618      ENDIF
619      srcv(jpr_tauwx)%clname = 'O_Tauwx'      ! ocean stress from wave in the x direction
620      srcv(jpr_tauwy)%clname = 'O_Tauwy'      ! ocean stress from wave in the y direction
621      IF( TRIM(sn_rcv_tauw%cldes ) == 'coupled' )  THEN
622         srcv(jpr_tauwx)%laction = .TRUE.
623         srcv(jpr_tauwy)%laction = .TRUE.
624         cpl_tauw = .TRUE.
625      ENDIF
626      srcv(jpr_wdrag)%clname = 'O_WDrag'     ! neutral surface drag coefficient
627      IF( TRIM(sn_rcv_wdrag%cldes ) == 'coupled' )  THEN
628         srcv(jpr_wdrag)%laction = .TRUE.
629         cpl_wdrag = .TRUE.
630      ENDIF
631      IF( srcv(jpr_tauwoc)%laction .AND. srcv(jpr_tauwx)%laction .AND. srcv(jpr_tauwy)%laction ) &
632            CALL ctl_stop( 'More than one method for modifying the ocean stress has been selected ', &
633                                     '(sn_rcv_tauwoc=coupled and sn_rcv_tauw=coupled)' )
634      !
635      !                                                      ! ------------------------------- !
636      !                                                      !   OPA-SAS coupling - rcv by opa !   
637      !                                                      ! ------------------------------- !
638      srcv(jpr_sflx)%clname = 'O_SFLX'
639      srcv(jpr_fice)%clname = 'RIceFrc'
640      !
641      IF( nn_components == jp_iam_opa ) THEN    ! OPA coupled to SAS via OASIS: force received field by OPA (sent by SAS)
642         srcv(:)%laction = .FALSE.   ! force default definition in case of opa <-> sas coupling
643         srcv(:)%clgrid  = 'T'       ! force default definition in case of opa <-> sas coupling
644         srcv(:)%nsgn    = 1.        ! force default definition in case of opa <-> sas coupling
645         srcv( (/jpr_qsroce, jpr_qnsoce, jpr_oemp, jpr_sflx, jpr_fice, jpr_otx1, jpr_oty1, jpr_taum/) )%laction = .TRUE.
646         srcv(jpr_otx1)%clgrid = 'U'        ! oce components given at U-point
647         srcv(jpr_oty1)%clgrid = 'V'        !           and           V-point
648         ! Vectors: change of sign at north fold ONLY if on the local grid
649         srcv( (/jpr_otx1,jpr_oty1/) )%nsgn = -1.
650         sn_rcv_tau%clvgrd = 'U,V'
651         sn_rcv_tau%clvor = 'local grid'
652         sn_rcv_tau%clvref = 'spherical'
653         sn_rcv_emp%cldes = 'oce only'
654         !
655         IF(lwp) THEN                        ! control print
656            WRITE(numout,*)
657            WRITE(numout,*)'               Special conditions for SAS-OPA coupling  '
658            WRITE(numout,*)'               OPA component  '
659            WRITE(numout,*)
660            WRITE(numout,*)'  received fields from SAS component '
661            WRITE(numout,*)'                  ice cover '
662            WRITE(numout,*)'                  oce only EMP  '
663            WRITE(numout,*)'                  salt flux  '
664            WRITE(numout,*)'                  mixed oce-ice solar flux  '
665            WRITE(numout,*)'                  mixed oce-ice non solar flux  '
666            WRITE(numout,*)'                  wind stress U,V on local grid and sperical coordinates '
667            WRITE(numout,*)'                  wind stress module'
668            WRITE(numout,*)
669         ENDIF
670      ENDIF
671      !                                                      ! -------------------------------- !
672      !                                                      !   OPA-SAS coupling - rcv by sas  !   
673      !                                                      ! -------------------------------- !
674      srcv(jpr_toce  )%clname = 'I_SSTSST'
675      srcv(jpr_soce  )%clname = 'I_SSSal'
676      srcv(jpr_ocx1  )%clname = 'I_OCurx1'
677      srcv(jpr_ocy1  )%clname = 'I_OCury1'
678      srcv(jpr_ssh   )%clname = 'I_SSHght'
679      srcv(jpr_e3t1st)%clname = 'I_E3T1st'   
680      srcv(jpr_fraqsr)%clname = 'I_FraQsr'   
681      !
682      IF( nn_components == jp_iam_sas ) THEN
683         IF( .NOT. ln_cpl ) srcv(:)%laction = .FALSE.   ! force default definition in case of opa <-> sas coupling
684         IF( .NOT. ln_cpl ) srcv(:)%clgrid  = 'T'       ! force default definition in case of opa <-> sas coupling
685         IF( .NOT. ln_cpl ) srcv(:)%nsgn    = 1.        ! force default definition in case of opa <-> sas coupling
686         srcv( (/jpr_toce, jpr_soce, jpr_ssh, jpr_fraqsr, jpr_ocx1, jpr_ocy1/) )%laction = .TRUE.
687         srcv( jpr_e3t1st )%laction = .NOT.ln_linssh
688         srcv(jpr_ocx1)%clgrid = 'U'        ! oce components given at U-point
689         srcv(jpr_ocy1)%clgrid = 'V'        !           and           V-point
690         ! Vectors: change of sign at north fold ONLY if on the local grid
691         srcv(jpr_ocx1:jpr_ocy1)%nsgn = -1.
692         ! Change first letter to couple with atmosphere if already coupled OPA
693         ! this is nedeed as each variable name used in the namcouple must be unique:
694         ! for example O_Runoff received by OPA from SAS and therefore O_Runoff received by SAS from the Atmosphere
695         DO jn = 1, jprcv
696            IF ( srcv(jn)%clname(1:1) == "O" ) srcv(jn)%clname = "S"//srcv(jn)%clname(2:LEN(srcv(jn)%clname))
697         END DO
698         !
699         IF(lwp) THEN                        ! control print
700            WRITE(numout,*)
701            WRITE(numout,*)'               Special conditions for SAS-OPA coupling  '
702            WRITE(numout,*)'               SAS component  '
703            WRITE(numout,*)
704            IF( .NOT. ln_cpl ) THEN
705               WRITE(numout,*)'  received fields from OPA component '
706            ELSE
707               WRITE(numout,*)'  Additional received fields from OPA component : '
708            ENDIF
709            WRITE(numout,*)'               sea surface temperature (Celsius) '
710            WRITE(numout,*)'               sea surface salinity ' 
711            WRITE(numout,*)'               surface currents ' 
712            WRITE(numout,*)'               sea surface height ' 
713            WRITE(numout,*)'               thickness of first ocean T level '       
714            WRITE(numout,*)'               fraction of solar net radiation absorbed in the first ocean level'
715            WRITE(numout,*)
716         ENDIF
717      ENDIF
718     
719      ! =================================================== !
720      ! Allocate all parts of frcv used for received fields !
721      ! =================================================== !
722      DO jn = 1, jprcv
723         IF ( srcv(jn)%laction ) ALLOCATE( frcv(jn)%z3(jpi,jpj,srcv(jn)%nct) )
724      END DO
725      ! Allocate taum part of frcv which is used even when not received as coupling field
726      IF ( .NOT. srcv(jpr_taum)%laction ) ALLOCATE( frcv(jpr_taum)%z3(jpi,jpj,srcv(jpr_taum)%nct) )
727      ! Allocate w10m part of frcv which is used even when not received as coupling field
728      IF ( .NOT. srcv(jpr_w10m)%laction ) ALLOCATE( frcv(jpr_w10m)%z3(jpi,jpj,srcv(jpr_w10m)%nct) )
729      ! Allocate jpr_otx1 part of frcv which is used even when not received as coupling field
730      IF ( .NOT. srcv(jpr_otx1)%laction ) ALLOCATE( frcv(jpr_otx1)%z3(jpi,jpj,srcv(jpr_otx1)%nct) )
731      IF ( .NOT. srcv(jpr_oty1)%laction ) ALLOCATE( frcv(jpr_oty1)%z3(jpi,jpj,srcv(jpr_oty1)%nct) )
732      ! Allocate itx1 and ity1 as they are used in sbc_cpl_ice_tau even if srcv(jpr_itx1)%laction = .FALSE.
733      IF( k_ice /= 0 ) THEN
734         IF ( .NOT. srcv(jpr_itx1)%laction ) ALLOCATE( frcv(jpr_itx1)%z3(jpi,jpj,srcv(jpr_itx1)%nct) )
735         IF ( .NOT. srcv(jpr_ity1)%laction ) ALLOCATE( frcv(jpr_ity1)%z3(jpi,jpj,srcv(jpr_ity1)%nct) )
736      END IF
737
738      ! ================================ !
739      !     Define the send interface    !
740      ! ================================ !
741      ! for each field: define the OASIS name                           (ssnd(:)%clname)
742      !                 define send or not from the namelist parameters (ssnd(:)%laction)
743      !                 define the north fold type of lbc               (ssnd(:)%nsgn)
744     
745      ! default definitions of nsnd
746      ssnd(:)%laction = .FALSE.   ;   ssnd(:)%clgrid = 'T'   ;   ssnd(:)%nsgn = 1.  ; ssnd(:)%nct = 1
747         
748      !                                                      ! ------------------------- !
749      !                                                      !    Surface temperature    !
750      !                                                      ! ------------------------- !
751      ssnd(jps_toce)%clname   = 'O_SSTSST'
752      ssnd(jps_tice)%clname   = 'O_TepIce'
753      ssnd(jps_ttilyr)%clname = 'O_TtiLyr'
754      ssnd(jps_tmix)%clname   = 'O_TepMix'
755      SELECT CASE( TRIM( sn_snd_temp%cldes ) )
756      CASE( 'none'                                 )       ! nothing to do
757      CASE( 'oce only'                             )   ;   ssnd( jps_toce )%laction = .TRUE.
758      CASE( 'oce and ice' , 'weighted oce and ice' , 'oce and weighted ice' )
759         ssnd( (/jps_toce, jps_tice/) )%laction = .TRUE.
760         IF ( TRIM( sn_snd_temp%clcat ) == 'yes' )  ssnd(jps_tice)%nct = nn_cats_cpl
761      CASE( 'mixed oce-ice'                        )   ;   ssnd( jps_tmix )%laction = .TRUE.
762      CASE default   ;   CALL ctl_stop( 'sbc_cpl_init: wrong definition of sn_snd_temp%cldes' )
763      END SELECT
764           
765      !                                                      ! ------------------------- !
766      !                                                      !          Albedo           !
767      !                                                      ! ------------------------- !
768      ssnd(jps_albice)%clname = 'O_AlbIce' 
769      ssnd(jps_albmix)%clname = 'O_AlbMix'
770      SELECT CASE( TRIM( sn_snd_alb%cldes ) )
771      CASE( 'none'                 )     ! nothing to do
772      CASE( 'ice' , 'weighted ice' )   ; ssnd(jps_albice)%laction = .TRUE.
773      CASE( 'mixed oce-ice'        )   ; ssnd(jps_albmix)%laction = .TRUE.
774      CASE default   ;   CALL ctl_stop( 'sbc_cpl_init: wrong definition of sn_snd_alb%cldes' )
775      END SELECT
776      !
777      ! Need to calculate oceanic albedo if
778      !     1. sending mixed oce-ice albedo or
779      !     2. receiving mixed oce-ice solar radiation
780      IF ( TRIM ( sn_snd_alb%cldes ) == 'mixed oce-ice' .OR. TRIM ( sn_rcv_qsr%cldes ) == 'mixed oce-ice' ) THEN
781         CALL oce_alb( zaos, zacs )
782         ! Due to lack of information on nebulosity : mean clear/overcast sky
783         alb_oce_mix(:,:) = ( zacs(:,:) + zaos(:,:) ) * 0.5
784      ENDIF
785      !                                                      ! ------------------------- !
786      !                                                      !  Ice fraction & Thickness !
787      !                                                      ! ------------------------- !
788      ssnd(jps_fice)%clname  = 'OIceFrc'
789      ssnd(jps_ficet)%clname = 'OIceFrcT' 
790      ssnd(jps_hice)%clname  = 'OIceTck'
791      ssnd(jps_a_p)%clname   = 'OPndFrc'
792      ssnd(jps_ht_p)%clname  = 'OPndTck'
793      ssnd(jps_hsnw)%clname  = 'OSnwTck'
794      ssnd(jps_fice1)%clname = 'OIceFrd'
795      IF( k_ice /= 0 ) THEN
796         ssnd(jps_fice)%laction  = .TRUE.                 ! if ice treated in the ocean (even in climato case)
797         ssnd(jps_fice1)%laction = .TRUE.                 ! First-order regridded ice concentration, to be used producing atmos-to-ice fluxes (Met Office requirement)
798! Currently no namelist entry to determine sending of multi-category ice fraction so use the thickness entry for now
799         IF ( TRIM( sn_snd_thick%clcat  ) == 'yes' ) ssnd(jps_fice)%nct  = nn_cats_cpl
800         IF ( TRIM( sn_snd_thick1%clcat ) == 'yes' ) ssnd(jps_fice1)%nct = nn_cats_cpl
801      ENDIF
802     
803      IF (TRIM( sn_snd_ifrac%cldes )  == 'coupled') ssnd(jps_ficet)%laction = .TRUE. 
804
805      SELECT CASE ( TRIM( sn_snd_thick%cldes ) )
806      CASE( 'none'         )       ! nothing to do
807      CASE( 'ice and snow' ) 
808         ssnd(jps_hice:jps_hsnw)%laction = .TRUE.
809         IF ( TRIM( sn_snd_thick%clcat ) == 'yes' ) THEN
810            ssnd(jps_hice:jps_hsnw)%nct = nn_cats_cpl
811         ENDIF
812      CASE ( 'weighted ice and snow' ) 
813         ssnd(jps_hice:jps_hsnw)%laction = .TRUE.
814         IF ( TRIM( sn_snd_thick%clcat ) == 'yes' ) ssnd(jps_hice:jps_hsnw)%nct = nn_cats_cpl
815      CASE default   ;   CALL ctl_stop( 'sbc_cpl_init: wrong definition of sn_snd_thick%cldes' )
816      END SELECT
817
818      !                                                      ! ------------------------- !
819      !                                                      !      Ice Meltponds        !
820      !                                                      ! ------------------------- !
821      ! Needed by Met Office
822      ssnd(jps_a_p)%clname  = 'OPndFrc'   
823      ssnd(jps_ht_p)%clname = 'OPndTck'   
824      SELECT CASE ( TRIM( sn_snd_mpnd%cldes ) ) 
825      CASE ( 'none' ) 
826         ssnd(jps_a_p)%laction  = .FALSE. 
827         ssnd(jps_ht_p)%laction = .FALSE. 
828      CASE ( 'ice only' ) 
829         ssnd(jps_a_p)%laction  = .TRUE. 
830         ssnd(jps_ht_p)%laction = .TRUE. 
831         IF ( TRIM( sn_snd_mpnd%clcat ) == 'yes' ) THEN
832            ssnd(jps_a_p)%nct  = nn_cats_cpl 
833            ssnd(jps_ht_p)%nct = nn_cats_cpl 
834         ELSE
835            IF ( nn_cats_cpl > 1 ) THEN
836               CALL ctl_stop( 'sbc_cpl_init: use weighted ice option for sn_snd_mpnd%cldes if not exchanging category fields' ) 
837            ENDIF
838         ENDIF
839      CASE ( 'weighted ice' ) 
840         ssnd(jps_a_p)%laction  = .TRUE. 
841         ssnd(jps_ht_p)%laction = .TRUE. 
842         IF ( TRIM( sn_snd_mpnd%clcat ) == 'yes' ) THEN
843            ssnd(jps_a_p)%nct  = nn_cats_cpl 
844            ssnd(jps_ht_p)%nct = nn_cats_cpl 
845         ENDIF
846      CASE default   ;   CALL ctl_stop( 'sbc_cpl_init: wrong definition of sn_snd_mpnd%cldes; '//sn_snd_mpnd%cldes ) 
847      END SELECT 
848 
849      !                                                      ! ------------------------- !
850      !                                                      !      Surface current      !
851      !                                                      ! ------------------------- !
852      !        ocean currents              !            ice velocities
853      ssnd(jps_ocx1)%clname = 'O_OCurx1'   ;   ssnd(jps_ivx1)%clname = 'O_IVelx1'
854      ssnd(jps_ocy1)%clname = 'O_OCury1'   ;   ssnd(jps_ivy1)%clname = 'O_IVely1'
855      ssnd(jps_ocz1)%clname = 'O_OCurz1'   ;   ssnd(jps_ivz1)%clname = 'O_IVelz1'
856      ssnd(jps_ocxw)%clname = 'O_OCurxw' 
857      ssnd(jps_ocyw)%clname = 'O_OCuryw' 
858      !
859      ssnd(jps_ocx1:jps_ivz1)%nsgn = -1.   ! vectors: change of the sign at the north fold
860
861      IF( sn_snd_crt%clvgrd == 'U,V' ) THEN
862         ssnd(jps_ocx1)%clgrid = 'U' ; ssnd(jps_ocy1)%clgrid = 'V'
863      ELSE IF( sn_snd_crt%clvgrd /= 'T' ) THEN 
864         CALL ctl_stop( 'sn_snd_crt%clvgrd must be equal to T' )
865         ssnd(jps_ocx1:jps_ivz1)%clgrid  = 'T'      ! all oce and ice components on the same unique grid
866      ENDIF
867      ssnd(jps_ocx1:jps_ivz1)%laction = .TRUE.   ! default: all are send
868      IF( TRIM( sn_snd_crt%clvref ) == 'spherical' )   ssnd( (/jps_ocz1, jps_ivz1/) )%laction = .FALSE. 
869      IF( TRIM( sn_snd_crt%clvor ) == 'eastward-northward' ) ssnd(jps_ocx1:jps_ivz1)%nsgn = 1.
870      SELECT CASE( TRIM( sn_snd_crt%cldes ) )
871      CASE( 'none'                 )   ;   ssnd(jps_ocx1:jps_ivz1)%laction = .FALSE.
872      CASE( 'oce only'             )   ;   ssnd(jps_ivx1:jps_ivz1)%laction = .FALSE.
873      CASE( 'weighted oce and ice' )   !   nothing to do
874      CASE( 'mixed oce-ice'        )   ;   ssnd(jps_ivx1:jps_ivz1)%laction = .FALSE.
875      CASE default   ;   CALL ctl_stop( 'sbc_cpl_init: wrong definition of sn_snd_crt%cldes' )
876      END SELECT
877
878      ssnd(jps_ocxw:jps_ocyw)%nsgn = -1.   ! vectors: change of the sign at the north fold
879       
880      IF( sn_snd_crtw%clvgrd == 'U,V' ) THEN
881         ssnd(jps_ocxw)%clgrid = 'U' ; ssnd(jps_ocyw)%clgrid = 'V' 
882      ELSE IF( sn_snd_crtw%clvgrd /= 'T' ) THEN
883         CALL ctl_stop( 'sn_snd_crtw%clvgrd must be equal to T' ) 
884      ENDIF
885      IF( TRIM( sn_snd_crtw%clvor ) == 'eastward-northward' ) ssnd(jps_ocxw:jps_ocyw)%nsgn = 1. 
886      SELECT CASE( TRIM( sn_snd_crtw%cldes ) ) 
887         CASE( 'none'                 )   ; ssnd(jps_ocxw:jps_ocyw)%laction = .FALSE. 
888         CASE( 'oce only'             )   ; ssnd(jps_ocxw:jps_ocyw)%laction = .TRUE. 
889         CASE( 'weighted oce and ice' )   !   nothing to do
890         CASE( 'mixed oce-ice'        )   ; ssnd(jps_ivx1:jps_ivz1)%laction = .FALSE. 
891         CASE default   ;   CALL ctl_stop( 'sbc_cpl_init: wrong definition of sn_snd_crtw%cldes' ) 
892      END SELECT 
893
894      !                                                      ! ------------------------- !
895      !                                                      !          CO2 flux         !
896      !                                                      ! ------------------------- !
897      ssnd(jps_co2)%clname = 'O_CO2FLX' ;  IF( TRIM(sn_snd_co2%cldes) == 'coupled' )    ssnd(jps_co2 )%laction = .TRUE.
898      !
899      !                                                      ! ------------------------- !
900      !                                                      ! Sea surface freezing temp !
901      !                                                      ! ------------------------- !
902      ! needed by Met Office
903      ssnd(jps_sstfrz)%clname = 'O_SSTFrz' ; IF( TRIM(sn_snd_sstfrz%cldes) == 'coupled' )  ssnd(jps_sstfrz)%laction = .TRUE. 
904      !
905      !                                                      ! ------------------------- !
906      !                                                      !    Ice conductivity       !
907      !                                                      ! ------------------------- !
908      ! needed by Met Office
909      ! Note that ultimately we will move to passing an ocean effective conductivity as well so there
910      ! will be some changes to the parts of the code which currently relate only to ice conductivity
911      ssnd(jps_ttilyr )%clname = 'O_TtiLyr' 
912      SELECT CASE ( TRIM( sn_snd_ttilyr%cldes ) ) 
913      CASE ( 'none' ) 
914         ssnd(jps_ttilyr)%laction = .FALSE. 
915      CASE ( 'ice only' ) 
916         ssnd(jps_ttilyr)%laction = .TRUE. 
917         IF ( TRIM( sn_snd_ttilyr%clcat ) == 'yes' ) THEN
918            ssnd(jps_ttilyr)%nct = nn_cats_cpl 
919         ELSE
920            IF ( nn_cats_cpl > 1 ) THEN
921               CALL ctl_stop( 'sbc_cpl_init: use weighted ice option for sn_snd_ttilyr%cldes if not exchanging category fields' ) 
922            ENDIF
923         ENDIF
924      CASE ( 'weighted ice' ) 
925         ssnd(jps_ttilyr)%laction = .TRUE. 
926         IF ( TRIM( sn_snd_ttilyr%clcat ) == 'yes' ) ssnd(jps_ttilyr)%nct = nn_cats_cpl 
927      CASE default   ;   CALL ctl_stop( 'sbc_cpl_init: wrong definition of sn_snd_ttilyr%cldes;'//sn_snd_ttilyr%cldes ) 
928      END SELECT
929
930      ssnd(jps_kice )%clname = 'OIceKn' 
931      SELECT CASE ( TRIM( sn_snd_cond%cldes ) ) 
932      CASE ( 'none' ) 
933         ssnd(jps_kice)%laction = .FALSE. 
934      CASE ( 'ice only' ) 
935         ssnd(jps_kice)%laction = .TRUE. 
936         IF ( TRIM( sn_snd_cond%clcat ) == 'yes' ) THEN
937            ssnd(jps_kice)%nct = nn_cats_cpl 
938         ELSE
939            IF ( nn_cats_cpl > 1 ) THEN
940               CALL ctl_stop( 'sbc_cpl_init: use weighted ice option for sn_snd_cond%cldes if not exchanging category fields' ) 
941            ENDIF
942         ENDIF
943      CASE ( 'weighted ice' ) 
944         ssnd(jps_kice)%laction = .TRUE. 
945         IF ( TRIM( sn_snd_cond%clcat ) == 'yes' ) ssnd(jps_kice)%nct = nn_cats_cpl 
946      CASE default   ;   CALL ctl_stop( 'sbc_cpl_init: wrong definition of sn_snd_cond%cldes;'//sn_snd_cond%cldes ) 
947      END SELECT 
948      !
949      !                                                      ! ------------------------- !
950      !                                                      !     Sea surface height    !
951      !                                                      ! ------------------------- !
952      ssnd(jps_wlev)%clname = 'O_Wlevel' ;  IF( TRIM(sn_snd_wlev%cldes) == 'coupled' )   ssnd(jps_wlev)%laction = .TRUE. 
953
954      !                                                      ! ------------------------------- !
955      !                                                      !   OPA-SAS coupling - snd by opa !   
956      !                                                      ! ------------------------------- !
957      ssnd(jps_ssh   )%clname = 'O_SSHght' 
958      ssnd(jps_soce  )%clname = 'O_SSSal' 
959      ssnd(jps_e3t1st)%clname = 'O_E3T1st'   
960      ssnd(jps_fraqsr)%clname = 'O_FraQsr'
961      !
962      IF( nn_components == jp_iam_opa ) THEN
963         ssnd(:)%laction = .FALSE.   ! force default definition in case of opa <-> sas coupling
964         ssnd( (/jps_toce, jps_soce, jps_ssh, jps_fraqsr, jps_ocx1, jps_ocy1/) )%laction = .TRUE.
965         ssnd( jps_e3t1st )%laction = .NOT.ln_linssh
966         ! vector definition: not used but cleaner...
967         ssnd(jps_ocx1)%clgrid  = 'U'        ! oce components given at U-point
968         ssnd(jps_ocy1)%clgrid  = 'V'        !           and           V-point
969         sn_snd_crt%clvgrd = 'U,V'
970         sn_snd_crt%clvor = 'local grid'
971         sn_snd_crt%clvref = 'spherical'
972         !
973         IF(lwp) THEN                        ! control print
974            WRITE(numout,*)
975            WRITE(numout,*)'  sent fields to SAS component '
976            WRITE(numout,*)'               sea surface temperature (T before, Celsius) '
977            WRITE(numout,*)'               sea surface salinity ' 
978            WRITE(numout,*)'               surface currents U,V on local grid and spherical coordinates' 
979            WRITE(numout,*)'               sea surface height ' 
980            WRITE(numout,*)'               thickness of first ocean T level '       
981            WRITE(numout,*)'               fraction of solar net radiation absorbed in the first ocean level'
982            WRITE(numout,*)
983         ENDIF
984      ENDIF
985      !                                                      ! ------------------------------- !
986      !                                                      !   OPA-SAS coupling - snd by sas !   
987      !                                                      ! ------------------------------- !
988      ssnd(jps_sflx  )%clname = 'I_SFLX'     
989      ssnd(jps_fice2 )%clname = 'IIceFrc'
990      ssnd(jps_qsroce)%clname = 'I_QsrOce'   
991      ssnd(jps_qnsoce)%clname = 'I_QnsOce'   
992      ssnd(jps_oemp  )%clname = 'IOEvaMPr' 
993      ssnd(jps_otx1  )%clname = 'I_OTaux1'   
994      ssnd(jps_oty1  )%clname = 'I_OTauy1'   
995      ssnd(jps_rnf   )%clname = 'I_Runoff'   
996      ssnd(jps_taum  )%clname = 'I_TauMod'   
997      !
998      IF( nn_components == jp_iam_sas ) THEN
999         IF( .NOT. ln_cpl ) ssnd(:)%laction = .FALSE.   ! force default definition in case of opa <-> sas coupling
1000         ssnd( (/jps_qsroce, jps_qnsoce, jps_oemp, jps_fice2, jps_sflx, jps_otx1, jps_oty1, jps_taum/) )%laction = .TRUE.
1001         !
1002         ! Change first letter to couple with atmosphere if already coupled with sea_ice
1003         ! this is nedeed as each variable name used in the namcouple must be unique:
1004         ! for example O_SSTSST sent by OPA to SAS and therefore S_SSTSST sent by SAS to the Atmosphere
1005         DO jn = 1, jpsnd
1006            IF ( ssnd(jn)%clname(1:1) == "O" ) ssnd(jn)%clname = "S"//ssnd(jn)%clname(2:LEN(ssnd(jn)%clname))
1007         END DO
1008         !
1009         IF(lwp) THEN                        ! control print
1010            WRITE(numout,*)
1011            IF( .NOT. ln_cpl ) THEN
1012               WRITE(numout,*)'  sent fields to OPA component '
1013            ELSE
1014               WRITE(numout,*)'  Additional sent fields to OPA component : '
1015            ENDIF
1016            WRITE(numout,*)'                  ice cover '
1017            WRITE(numout,*)'                  oce only EMP  '
1018            WRITE(numout,*)'                  salt flux  '
1019            WRITE(numout,*)'                  mixed oce-ice solar flux  '
1020            WRITE(numout,*)'                  mixed oce-ice non solar flux  '
1021            WRITE(numout,*)'                  wind stress U,V components'
1022            WRITE(numout,*)'                  wind stress module'
1023         ENDIF
1024      ENDIF
1025
1026      !
1027      ! ================================ !
1028      !   initialisation of the coupler  !
1029      ! ================================ !
1030
1031      CALL cpl_define(jprcv, jpsnd, nn_cplmodel)
1032     
1033      IF (ln_usecplmask) THEN
1034         xcplmask(:,:,:) = 0.
1035         CALL iom_open( 'cplmask', inum )
1036         CALL iom_get( inum, jpdom_unknown, 'cplmask', xcplmask(1:nlci,1:nlcj,1:nn_cplmodel),   &
1037            &          kstart = (/ mig(1),mjg(1),1 /), kcount = (/ nlci,nlcj,nn_cplmodel /) )
1038         CALL iom_close( inum )
1039      ELSE
1040         xcplmask(:,:,:) = 1.
1041      ENDIF
1042      xcplmask(:,:,0) = 1. - SUM( xcplmask(:,:,1:nn_cplmodel), dim = 3 )
1043      !
1044      ncpl_qsr_freq = cpl_freq( 'O_QsrOce' ) + cpl_freq( 'O_QsrMix' ) + cpl_freq( 'I_QsrOce' ) + cpl_freq( 'I_QsrMix' )
1045      IF( ln_dm2dc .AND. ln_cpl .AND. ncpl_qsr_freq /= 86400 )   &
1046         &   CALL ctl_stop( 'sbc_cpl_init: diurnal cycle reconstruction (ln_dm2dc) needs daily couping for solar radiation' )
1047      IF( ln_dm2dc .AND. ln_cpl ) ncpl_qsr_freq = 86400 / ncpl_qsr_freq
1048      !
1049   END SUBROUTINE sbc_cpl_init
1050
1051
1052   SUBROUTINE sbc_cpl_rcv( kt, k_fsbc, k_ice )     
1053      !!----------------------------------------------------------------------
1054      !!             ***  ROUTINE sbc_cpl_rcv  ***
1055      !!
1056      !! ** Purpose :   provide the stress over the ocean and, if no sea-ice,
1057      !!                provide the ocean heat and freshwater fluxes.
1058      !!
1059      !! ** Method  : - Receive all the atmospheric fields (stored in frcv array). called at each time step.
1060      !!                OASIS controls if there is something do receive or not. nrcvinfo contains the info
1061      !!                to know if the field was really received or not
1062      !!
1063      !!              --> If ocean stress was really received:
1064      !!
1065      !!                  - transform the received ocean stress vector from the received
1066      !!                 referential and grid into an atmosphere-ocean stress in
1067      !!                 the (i,j) ocean referencial and at the ocean velocity point.
1068      !!                    The received stress are :
1069      !!                     - defined by 3 components (if cartesian coordinate)
1070      !!                            or by 2 components (if spherical)
1071      !!                     - oriented along geographical   coordinate (if eastward-northward)
1072      !!                            or  along the local grid coordinate (if local grid)
1073      !!                     - given at U- and V-point, resp.   if received on 2 grids
1074      !!                            or at T-point               if received on 1 grid
1075      !!                    Therefore and if necessary, they are successively
1076      !!                  processed in order to obtain them
1077      !!                     first  as  2 components on the sphere
1078      !!                     second as  2 components oriented along the local grid
1079      !!                     third  as  2 components on the U,V grid
1080      !!
1081      !!              -->
1082      !!
1083      !!              - In 'ocean only' case, non solar and solar ocean heat fluxes
1084      !!             and total ocean freshwater fluxes 
1085      !!
1086      !! ** Method  :   receive all fields from the atmosphere and transform
1087      !!              them into ocean surface boundary condition fields
1088      !!
1089      !! ** Action  :   update  utau, vtau   ocean stress at U,V grid
1090      !!                        taum         wind stress module at T-point
1091      !!                        wndm         wind speed  module at T-point over free ocean or leads in presence of sea-ice
1092      !!                        qns          non solar heat fluxes including emp heat content    (ocean only case)
1093      !!                                     and the latent heat flux of solid precip. melting
1094      !!                        qsr          solar ocean heat fluxes   (ocean only case)
1095      !!                        emp          upward mass flux [evap. - precip. (- runoffs) (- calving)] (ocean only case)
1096      !!----------------------------------------------------------------------
1097      USE zdf_oce,  ONLY :   ln_zdfswm
1098      !
1099      INTEGER, INTENT(in) ::   kt          ! ocean model time step index
1100      INTEGER, INTENT(in) ::   k_fsbc      ! frequency of sbc (-> ice model) computation
1101      INTEGER, INTENT(in) ::   k_ice       ! ice management in the sbc (=0/1/2/3)
1102      !!
1103      LOGICAL  ::   llnewtx, llnewtau      ! update wind stress components and module??
1104      INTEGER  ::   ji, jj, jn             ! dummy loop indices
1105      INTEGER  ::   isec                   ! number of seconds since nit000 (assuming rdt did not change since nit000)
1106      REAL(wp) ::   zcumulneg, zcumulpos   ! temporary scalars     
1107      REAL(wp) ::   zcoef                  ! temporary scalar
1108      REAL(wp) ::   zrhoa  = 1.22          ! Air density kg/m3
1109      REAL(wp) ::   zcdrag = 1.5e-3        ! drag coefficient
1110      REAL(wp) ::   zzx, zzy               ! temporary variables
1111      REAL(wp), DIMENSION(jpi,jpj) ::   ztx, zty, zmsk, zemp, zqns, zqsr
1112      !!----------------------------------------------------------------------
1113      !
1114      IF( ln_mixcpl )   zmsk(:,:) = 1. - xcplmask(:,:,0)
1115      !
1116      !                                                      ! ======================================================= !
1117      !                                                      ! Receive all the atmos. fields (including ice information)
1118      !                                                      ! ======================================================= !
1119      isec = ( kt - nit000 ) * NINT( rdt )                      ! date of exchanges
1120      DO jn = 1, jprcv                                          ! received fields sent by the atmosphere
1121         IF( srcv(jn)%laction )   CALL cpl_rcv( jn, isec, frcv(jn)%z3, xcplmask(:,:,1:nn_cplmodel), nrcvinfo(jn) )
1122      END DO
1123
1124      !                                                      ! ========================= !
1125      IF( srcv(jpr_otx1)%laction ) THEN                      !  ocean stress components  !
1126         !                                                   ! ========================= !
1127         ! define frcv(jpr_otx1)%z3(:,:,1) and frcv(jpr_oty1)%z3(:,:,1): stress at U/V point along model grid
1128         ! => need to be done only when we receive the field
1129         IF(  nrcvinfo(jpr_otx1) == OASIS_Rcv ) THEN
1130            !
1131            IF( TRIM( sn_rcv_tau%clvref ) == 'cartesian' ) THEN            ! 2 components on the sphere
1132               !                                                       ! (cartesian to spherical -> 3 to 2 components)
1133               !
1134               CALL geo2oce( frcv(jpr_otx1)%z3(:,:,1), frcv(jpr_oty1)%z3(:,:,1), frcv(jpr_otz1)%z3(:,:,1),   &
1135                  &          srcv(jpr_otx1)%clgrid, ztx, zty )
1136               frcv(jpr_otx1)%z3(:,:,1) = ztx(:,:)   ! overwrite 1st comp. on the 1st grid
1137               frcv(jpr_oty1)%z3(:,:,1) = zty(:,:)   ! overwrite 2nd comp. on the 1st grid
1138               !
1139               IF( srcv(jpr_otx2)%laction ) THEN
1140                  CALL geo2oce( frcv(jpr_otx2)%z3(:,:,1), frcv(jpr_oty2)%z3(:,:,1), frcv(jpr_otz2)%z3(:,:,1),   &
1141                     &          srcv(jpr_otx2)%clgrid, ztx, zty )
1142                  frcv(jpr_otx2)%z3(:,:,1) = ztx(:,:)   ! overwrite 1st comp. on the 2nd grid
1143                  frcv(jpr_oty2)%z3(:,:,1) = zty(:,:)   ! overwrite 2nd comp. on the 2nd grid
1144               ENDIF
1145               !
1146            ENDIF
1147            !
1148            IF( TRIM( sn_rcv_tau%clvor ) == 'eastward-northward' ) THEN   ! 2 components oriented along the local grid
1149               !                                                       ! (geographical to local grid -> rotate the components)
1150               CALL rot_rep( frcv(jpr_otx1)%z3(:,:,1), frcv(jpr_oty1)%z3(:,:,1), srcv(jpr_otx1)%clgrid, 'en->i', ztx )   
1151               IF( srcv(jpr_otx2)%laction ) THEN
1152                  CALL rot_rep( frcv(jpr_otx2)%z3(:,:,1), frcv(jpr_oty2)%z3(:,:,1), srcv(jpr_otx2)%clgrid, 'en->j', zty )   
1153               ELSE
1154                  CALL rot_rep( frcv(jpr_otx1)%z3(:,:,1), frcv(jpr_oty1)%z3(:,:,1), srcv(jpr_otx1)%clgrid, 'en->j', zty ) 
1155               ENDIF
1156               frcv(jpr_otx1)%z3(:,:,1) = ztx(:,:)      ! overwrite 1st component on the 1st grid
1157               frcv(jpr_oty1)%z3(:,:,1) = zty(:,:)      ! overwrite 2nd component on the 2nd grid
1158            ENDIF
1159            !                             
1160            IF( srcv(jpr_otx1)%clgrid == 'T' ) THEN
1161               DO jj = 2, jpjm1                                          ! T ==> (U,V)
1162                  DO ji = fs_2, fs_jpim1   ! vector opt.
1163                     frcv(jpr_otx1)%z3(ji,jj,1) = 0.5 * ( frcv(jpr_otx1)%z3(ji+1,jj  ,1) + frcv(jpr_otx1)%z3(ji,jj,1) )
1164                     frcv(jpr_oty1)%z3(ji,jj,1) = 0.5 * ( frcv(jpr_oty1)%z3(ji  ,jj+1,1) + frcv(jpr_oty1)%z3(ji,jj,1) )
1165                  END DO
1166               END DO
1167               CALL lbc_lnk_multi( 'sbccpl', frcv(jpr_otx1)%z3(:,:,1), 'U',  -1., frcv(jpr_oty1)%z3(:,:,1), 'V',  -1. )
1168            ENDIF
1169            llnewtx = .TRUE.
1170         ELSE
1171            llnewtx = .FALSE.
1172         ENDIF
1173         !                                                   ! ========================= !
1174      ELSE                                                   !   No dynamical coupling   !
1175         !                                                   ! ========================= !
1176         frcv(jpr_otx1)%z3(:,:,1) = 0.e0                               ! here simply set to zero
1177         frcv(jpr_oty1)%z3(:,:,1) = 0.e0                               ! an external read in a file can be added instead
1178         llnewtx = .TRUE.
1179         !
1180      ENDIF
1181      !                                                      ! ========================= !
1182      !                                                      !    wind stress module     !   (taum)
1183      !                                                      ! ========================= !
1184      IF( .NOT. srcv(jpr_taum)%laction ) THEN                    ! compute wind stress module from its components if not received
1185         ! => need to be done only when otx1 was changed
1186         IF( llnewtx ) THEN
1187            DO jj = 2, jpjm1
1188               DO ji = fs_2, fs_jpim1   ! vect. opt.
1189                  zzx = frcv(jpr_otx1)%z3(ji-1,jj  ,1) + frcv(jpr_otx1)%z3(ji,jj,1)
1190                  zzy = frcv(jpr_oty1)%z3(ji  ,jj-1,1) + frcv(jpr_oty1)%z3(ji,jj,1)
1191                  frcv(jpr_taum)%z3(ji,jj,1) = 0.5 * SQRT( zzx * zzx + zzy * zzy )
1192               END DO
1193            END DO
1194            CALL lbc_lnk( 'sbccpl', frcv(jpr_taum)%z3(:,:,1), 'T', 1. )
1195            llnewtau = .TRUE.
1196         ELSE
1197            llnewtau = .FALSE.
1198         ENDIF
1199      ELSE
1200         llnewtau = nrcvinfo(jpr_taum) == OASIS_Rcv
1201         ! Stress module can be negative when received (interpolation problem)
1202         IF( llnewtau ) THEN
1203            frcv(jpr_taum)%z3(:,:,1) = MAX( 0._wp, frcv(jpr_taum)%z3(:,:,1) )
1204         ENDIF
1205      ENDIF
1206      !
1207      !                                                      ! ========================= !
1208      !                                                      !      10 m wind speed      !   (wndm)
1209      !                                                      ! ========================= !
1210      IF( .NOT. srcv(jpr_w10m)%laction ) THEN                    ! compute wind spreed from wind stress module if not received 
1211         ! => need to be done only when taumod was changed
1212         IF( llnewtau ) THEN
1213            zcoef = 1. / ( zrhoa * zcdrag ) 
1214            DO jj = 1, jpj
1215               DO ji = 1, jpi 
1216                  frcv(jpr_w10m)%z3(ji,jj,1) = SQRT( frcv(jpr_taum)%z3(ji,jj,1) * zcoef )
1217               END DO
1218            END DO
1219         ENDIF
1220      ENDIF
1221
1222      ! u(v)tau and taum will be modified by ice model
1223      ! -> need to be reset before each call of the ice/fsbc     
1224      IF( MOD( kt-1, k_fsbc ) == 0 ) THEN
1225         !
1226         IF( ln_mixcpl ) THEN
1227            utau(:,:) = utau(:,:) * xcplmask(:,:,0) + frcv(jpr_otx1)%z3(:,:,1) * zmsk(:,:)
1228            vtau(:,:) = vtau(:,:) * xcplmask(:,:,0) + frcv(jpr_oty1)%z3(:,:,1) * zmsk(:,:)
1229            taum(:,:) = taum(:,:) * xcplmask(:,:,0) + frcv(jpr_taum)%z3(:,:,1) * zmsk(:,:)
1230            wndm(:,:) = wndm(:,:) * xcplmask(:,:,0) + frcv(jpr_w10m)%z3(:,:,1) * zmsk(:,:)
1231         ELSE
1232            utau(:,:) = frcv(jpr_otx1)%z3(:,:,1)
1233            vtau(:,:) = frcv(jpr_oty1)%z3(:,:,1)
1234            taum(:,:) = frcv(jpr_taum)%z3(:,:,1)
1235            wndm(:,:) = frcv(jpr_w10m)%z3(:,:,1)
1236         ENDIF
1237         CALL iom_put( "taum_oce", taum )   ! output wind stress module
1238         
1239      ENDIF
1240
1241      !                                                      ! ================== !
1242      !                                                      ! atmosph. CO2 (ppm) !
1243      !                                                      ! ================== !
1244      IF( srcv(jpr_co2)%laction )   atm_co2(:,:) = frcv(jpr_co2)%z3(:,:,1)
1245      !
1246      !                                                      ! ================== !
1247      !                                                      !   ice skin temp.   !
1248      !                                                      ! ================== !
1249#if defined key_si3
1250      ! needed by Met Office
1251      IF( srcv(jpr_ts_ice)%laction ) THEN
1252         WHERE    ( frcv(jpr_ts_ice)%z3(:,:,:) > 0.0  )   ;   tsfc_ice(:,:,:) = 0.0 
1253         ELSEWHERE( frcv(jpr_ts_ice)%z3(:,:,:) < -60. )   ;   tsfc_ice(:,:,:) = -60.
1254         ELSEWHERE                                        ;   tsfc_ice(:,:,:) = frcv(jpr_ts_ice)%z3(:,:,:)
1255         END WHERE
1256      ENDIF 
1257#endif
1258      !                                                      ! ========================= !
1259      !                                                      ! Mean Sea Level Pressure   !   (taum)
1260      !                                                      ! ========================= !
1261      IF( srcv(jpr_mslp)%laction ) THEN                    ! UKMO SHELF effect of atmospheric pressure on SSH
1262          IF( kt /= nit000 )   ssh_ibb(:,:) = ssh_ib(:,:)    !* Swap of ssh_ib fields
1263
1264          r1_grau = 1.e0 / (grav * rau0)               !* constant for optimization
1265          ssh_ib(:,:) = - ( frcv(jpr_mslp)%z3(:,:,1) - rpref ) * r1_grau    ! equivalent ssh (inverse barometer)
1266          apr   (:,:) =     frcv(jpr_mslp)%z3(:,:,1)                         !atmospheric pressure
1267   
1268          IF( kt == nit000 ) ssh_ibb(:,:) = ssh_ib(:,:)  ! correct this later (read from restart if possible)
1269      END IF 
1270      !
1271      IF( ln_sdw ) THEN  ! Stokes Drift correction activated
1272      !                                                      ! ========================= !
1273      !                                                      !       Stokes drift u      !
1274      !                                                      ! ========================= !
1275         IF( srcv(jpr_sdrftx)%laction ) ut0sd(:,:) = frcv(jpr_sdrftx)%z3(:,:,1)
1276      !
1277      !                                                      ! ========================= !
1278      !                                                      !       Stokes drift v      !
1279      !                                                      ! ========================= !
1280         IF( srcv(jpr_sdrfty)%laction ) vt0sd(:,:) = frcv(jpr_sdrfty)%z3(:,:,1)
1281      !
1282      !                                                      ! ========================= !
1283      !                                                      !      Wave mean period     !
1284      !                                                      ! ========================= !
1285         IF( srcv(jpr_wper)%laction ) wmp(:,:) = frcv(jpr_wper)%z3(:,:,1)
1286      !
1287      !                                                      ! ========================= !
1288      !                                                      !  Significant wave height  !
1289      !                                                      ! ========================= !
1290         IF( srcv(jpr_hsig)%laction ) hsw(:,:) = frcv(jpr_hsig)%z3(:,:,1)
1291      !
1292      !                                                      ! ========================= ! 
1293      !                                                      !    Wave peak frequency    !
1294      !                                                      ! ========================= ! 
1295         IF( srcv(jpr_wfreq)%laction ) wfreq(:,:) = frcv(jpr_wfreq)%z3(:,:,1)
1296      !
1297      !                                                      ! ========================= !
1298      !                                                      !    Vertical mixing Qiao   !
1299      !                                                      ! ========================= !
1300         IF( srcv(jpr_wnum)%laction .AND. ln_zdfswm ) wnum(:,:) = frcv(jpr_wnum)%z3(:,:,1)
1301
1302         ! Calculate the 3D Stokes drift both in coupled and not fully uncoupled mode
1303         IF( srcv(jpr_sdrftx)%laction .OR. srcv(jpr_sdrfty)%laction .OR. srcv(jpr_wper)%laction &
1304                                      .OR. srcv(jpr_hsig)%laction   .OR. srcv(jpr_wfreq)%laction) THEN
1305            CALL sbc_stokes()
1306         ENDIF
1307      ENDIF
1308      !                                                      ! ========================= !
1309      !                                                      ! Stress adsorbed by waves  !
1310      !                                                      ! ========================= !
1311      IF( srcv(jpr_tauwoc)%laction .AND. ln_tauwoc ) tauoc_wave(:,:) = frcv(jpr_tauwoc)%z3(:,:,1)
1312
1313      !                                                      ! ========================= ! 
1314      !                                                      ! Stress component by waves !
1315      !                                                      ! ========================= ! 
1316      IF( srcv(jpr_tauwx)%laction .AND. srcv(jpr_tauwy)%laction .AND. ln_tauw ) THEN
1317         tauw_x(:,:) = frcv(jpr_tauwx)%z3(:,:,1)
1318         tauw_y(:,:) = frcv(jpr_tauwy)%z3(:,:,1)
1319      ENDIF
1320
1321      !                                                      ! ========================= !
1322      !                                                      !   Wave drag coefficient   !
1323      !                                                      ! ========================= !
1324      IF( srcv(jpr_wdrag)%laction .AND. ln_cdgw )   cdn_wave(:,:) = frcv(jpr_wdrag)%z3(:,:,1)
1325
1326      !  Fields received by SAS when OASIS coupling
1327      !  (arrays no more filled at sbcssm stage)
1328      !                                                      ! ================== !
1329      !                                                      !        SSS         !
1330      !                                                      ! ================== !
1331      IF( srcv(jpr_soce)%laction ) THEN                      ! received by sas in case of opa <-> sas coupling
1332         sss_m(:,:) = frcv(jpr_soce)%z3(:,:,1)
1333         CALL iom_put( 'sss_m', sss_m )
1334      ENDIF
1335      !                                               
1336      !                                                      ! ================== !
1337      !                                                      !        SST         !
1338      !                                                      ! ================== !
1339      IF( srcv(jpr_toce)%laction ) THEN                      ! received by sas in case of opa <-> sas coupling
1340         sst_m(:,:) = frcv(jpr_toce)%z3(:,:,1)
1341         IF( srcv(jpr_soce)%laction .AND. l_useCT ) THEN    ! make sure that sst_m is the potential temperature
1342            sst_m(:,:) = eos_pt_from_ct( sst_m(:,:), sss_m(:,:) )
1343         ENDIF
1344      ENDIF
1345      !                                                      ! ================== !
1346      !                                                      !        SSH         !
1347      !                                                      ! ================== !
1348      IF( srcv(jpr_ssh )%laction ) THEN                      ! received by sas in case of opa <-> sas coupling
1349         ssh_m(:,:) = frcv(jpr_ssh )%z3(:,:,1)
1350         CALL iom_put( 'ssh_m', ssh_m )
1351      ENDIF
1352      !                                                      ! ================== !
1353      !                                                      !  surface currents  !
1354      !                                                      ! ================== !
1355      IF( srcv(jpr_ocx1)%laction ) THEN                      ! received by sas in case of opa <-> sas coupling
1356         ssu_m(:,:) = frcv(jpr_ocx1)%z3(:,:,1)
1357         ub (:,:,1) = ssu_m(:,:)                             ! will be used in icestp in the call of ice_forcing_tau
1358         un (:,:,1) = ssu_m(:,:)                             ! will be used in sbc_cpl_snd if atmosphere coupling
1359         CALL iom_put( 'ssu_m', ssu_m )
1360      ENDIF
1361      IF( srcv(jpr_ocy1)%laction ) THEN
1362         ssv_m(:,:) = frcv(jpr_ocy1)%z3(:,:,1)
1363         vb (:,:,1) = ssv_m(:,:)                             ! will be used in icestp in the call of ice_forcing_tau
1364         vn (:,:,1) = ssv_m(:,:)                             ! will be used in sbc_cpl_snd if atmosphere coupling
1365         CALL iom_put( 'ssv_m', ssv_m )
1366      ENDIF
1367      !                                                      ! ======================== !
1368      !                                                      !  first T level thickness !
1369      !                                                      ! ======================== !
1370      IF( srcv(jpr_e3t1st )%laction ) THEN                   ! received by sas in case of opa <-> sas coupling
1371         e3t_m(:,:) = frcv(jpr_e3t1st )%z3(:,:,1)
1372         CALL iom_put( 'e3t_m', e3t_m(:,:) )
1373      ENDIF
1374      !                                                      ! ================================ !
1375      !                                                      !  fraction of solar net radiation !
1376      !                                                      ! ================================ !
1377      IF( srcv(jpr_fraqsr)%laction ) THEN                    ! received by sas in case of opa <-> sas coupling
1378         frq_m(:,:) = frcv(jpr_fraqsr)%z3(:,:,1)
1379         CALL iom_put( 'frq_m', frq_m )
1380      ENDIF
1381     
1382      !                                                      ! ========================= !
1383      IF( k_ice <= 1 .AND. MOD( kt-1, k_fsbc ) == 0 ) THEN   !  heat & freshwater fluxes ! (Ocean only case)
1384         !                                                   ! ========================= !
1385         !
1386         !                                                       ! total freshwater fluxes over the ocean (emp)
1387         IF( srcv(jpr_oemp)%laction .OR. srcv(jpr_rain)%laction ) THEN
1388            SELECT CASE( TRIM( sn_rcv_emp%cldes ) )                                    ! evaporation - precipitation
1389            CASE( 'conservative' )
1390               zemp(:,:) = frcv(jpr_tevp)%z3(:,:,1) - ( frcv(jpr_rain)%z3(:,:,1) + frcv(jpr_snow)%z3(:,:,1) )
1391            CASE( 'oce only', 'oce and ice' )
1392               zemp(:,:) = frcv(jpr_oemp)%z3(:,:,1)
1393            CASE default
1394               CALL ctl_stop( 'sbc_cpl_rcv: wrong definition of sn_rcv_emp%cldes' )
1395            END SELECT
1396         ELSE
1397            zemp(:,:) = 0._wp
1398         ENDIF
1399         !
1400         !                                                        ! runoffs and calving (added in emp)
1401         IF( srcv(jpr_rnf)%laction )     rnf(:,:) = frcv(jpr_rnf)%z3(:,:,1)
1402         IF( srcv(jpr_cal)%laction )     zemp(:,:) = zemp(:,:) - frcv(jpr_cal)%z3(:,:,1)
1403 
1404         IF( srcv(jpr_icb)%laction )  THEN
1405             fwficb(:,:) = frcv(jpr_icb)%z3(:,:,1)
1406             rnf(:,:)    = rnf(:,:) + fwficb(:,:)   ! iceberg added to runfofs
1407         ENDIF
1408         !
1409         ! ice shelf fwf
1410         IF( srcv(jpr_isf)%laction )  THEN
1411            fwfisf_oasis(:,:) = - frcv(jpr_isf)%z3(:,:,1)  ! fresh water flux from the isf (fwfisf <0 mean melting) 
1412         END IF
1413       
1414         IF( ln_mixcpl ) THEN   ;   emp(:,:) = emp(:,:) * xcplmask(:,:,0) + zemp(:,:) * zmsk(:,:)
1415         ELSE                   ;   emp(:,:) =                              zemp(:,:)
1416         ENDIF
1417         !
1418         !                                                       ! non solar heat flux over the ocean (qns)
1419         IF(      srcv(jpr_qnsoce)%laction ) THEN   ;   zqns(:,:) = frcv(jpr_qnsoce)%z3(:,:,1)
1420         ELSE IF( srcv(jpr_qnsmix)%laction ) THEN   ;   zqns(:,:) = frcv(jpr_qnsmix)%z3(:,:,1)
1421         ELSE                                       ;   zqns(:,:) = 0._wp
1422         END IF
1423         ! update qns over the free ocean with:
1424         IF( nn_components /= jp_iam_opa ) THEN
1425            zqns(:,:) =  zqns(:,:) - zemp(:,:) * sst_m(:,:) * rcp         ! remove heat content due to mass flux (assumed to be at SST)
1426            IF( srcv(jpr_snow  )%laction ) THEN
1427               zqns(:,:) = zqns(:,:) - frcv(jpr_snow)%z3(:,:,1) * rLfus   ! energy for melting solid precipitation over the free ocean
1428            ENDIF
1429         ENDIF
1430         !
1431         IF( srcv(jpr_icb)%laction )  zqns(:,:) = zqns(:,:) - frcv(jpr_icb)%z3(:,:,1) * rLfus ! remove heat content associated to iceberg melting
1432         !
1433         IF( ln_mixcpl ) THEN   ;   qns(:,:) = qns(:,:) * xcplmask(:,:,0) + zqns(:,:) * zmsk(:,:)
1434         ELSE                   ;   qns(:,:) =                              zqns(:,:)
1435         ENDIF
1436
1437         !                                                       ! solar flux over the ocean          (qsr)
1438         IF     ( srcv(jpr_qsroce)%laction ) THEN   ;   zqsr(:,:) = frcv(jpr_qsroce)%z3(:,:,1)
1439         ELSE IF( srcv(jpr_qsrmix)%laction ) then   ;   zqsr(:,:) = frcv(jpr_qsrmix)%z3(:,:,1)
1440         ELSE                                       ;   zqsr(:,:) = 0._wp
1441         ENDIF
1442         IF( ln_dm2dc .AND. ln_cpl )   zqsr(:,:) = sbc_dcy( zqsr )   ! modify qsr to include the diurnal cycle
1443         IF( ln_mixcpl ) THEN   ;   qsr(:,:) = qsr(:,:) * xcplmask(:,:,0) + zqsr(:,:) * zmsk(:,:)
1444         ELSE                   ;   qsr(:,:) =                              zqsr(:,:)
1445         ENDIF
1446         !
1447         ! salt flux over the ocean (received by opa in case of opa <-> sas coupling)
1448         IF( srcv(jpr_sflx )%laction )   sfx(:,:) = frcv(jpr_sflx  )%z3(:,:,1)
1449         ! Ice cover  (received by opa in case of opa <-> sas coupling)
1450         IF( srcv(jpr_fice )%laction )   fr_i(:,:) = frcv(jpr_fice )%z3(:,:,1)
1451         !
1452      ENDIF
1453      !
1454   END SUBROUTINE sbc_cpl_rcv
1455   
1456
1457   SUBROUTINE sbc_cpl_ice_tau( p_taui, p_tauj )     
1458      !!----------------------------------------------------------------------
1459      !!             ***  ROUTINE sbc_cpl_ice_tau  ***
1460      !!
1461      !! ** Purpose :   provide the stress over sea-ice in coupled mode
1462      !!
1463      !! ** Method  :   transform the received stress from the atmosphere into
1464      !!             an atmosphere-ice stress in the (i,j) ocean referencial
1465      !!             and at the velocity point of the sea-ice model:
1466      !!                'C'-grid : i- (j-) components given at U- (V-) point
1467      !!
1468      !!                The received stress are :
1469      !!                 - defined by 3 components (if cartesian coordinate)
1470      !!                        or by 2 components (if spherical)
1471      !!                 - oriented along geographical   coordinate (if eastward-northward)
1472      !!                        or  along the local grid coordinate (if local grid)
1473      !!                 - given at U- and V-point, resp.   if received on 2 grids
1474      !!                        or at a same point (T or I) if received on 1 grid
1475      !!                Therefore and if necessary, they are successively
1476      !!             processed in order to obtain them
1477      !!                 first  as  2 components on the sphere
1478      !!                 second as  2 components oriented along the local grid
1479      !!                 third  as  2 components on the ice grid point
1480      !!
1481      !!                Except in 'oce and ice' case, only one vector stress field
1482      !!             is received. It has already been processed in sbc_cpl_rcv
1483      !!             so that it is now defined as (i,j) components given at U-
1484      !!             and V-points, respectively. 
1485      !!
1486      !! ** Action  :   return ptau_i, ptau_j, the stress over the ice
1487      !!----------------------------------------------------------------------
1488      REAL(wp), INTENT(out), DIMENSION(:,:) ::   p_taui   ! i- & j-components of atmos-ice stress [N/m2]
1489      REAL(wp), INTENT(out), DIMENSION(:,:) ::   p_tauj   ! at I-point (B-grid) or U & V-point (C-grid)
1490      !!
1491      INTEGER ::   ji, jj   ! dummy loop indices
1492      INTEGER ::   itx      ! index of taux over ice
1493      REAL(wp), DIMENSION(jpi,jpj) ::   ztx, zty 
1494      !!----------------------------------------------------------------------
1495      !
1496      IF( srcv(jpr_itx1)%laction ) THEN   ;   itx =  jpr_itx1   
1497      ELSE                                ;   itx =  jpr_otx1
1498      ENDIF
1499
1500      ! do something only if we just received the stress from atmosphere
1501      IF(  nrcvinfo(itx) == OASIS_Rcv ) THEN
1502         !                                                      ! ======================= !
1503         IF( srcv(jpr_itx1)%laction ) THEN                      !   ice stress received   !
1504            !                                                   ! ======================= !
1505           
1506            IF( TRIM( sn_rcv_tau%clvref ) == 'cartesian' ) THEN            ! 2 components on the sphere
1507               !                                                       ! (cartesian to spherical -> 3 to 2 components)
1508               CALL geo2oce(  frcv(jpr_itx1)%z3(:,:,1), frcv(jpr_ity1)%z3(:,:,1), frcv(jpr_itz1)%z3(:,:,1),   &
1509                  &          srcv(jpr_itx1)%clgrid, ztx, zty )
1510               frcv(jpr_itx1)%z3(:,:,1) = ztx(:,:)   ! overwrite 1st comp. on the 1st grid
1511               frcv(jpr_ity1)%z3(:,:,1) = zty(:,:)   ! overwrite 2nd comp. on the 1st grid
1512               !
1513               IF( srcv(jpr_itx2)%laction ) THEN
1514                  CALL geo2oce( frcv(jpr_itx2)%z3(:,:,1), frcv(jpr_ity2)%z3(:,:,1), frcv(jpr_itz2)%z3(:,:,1),   &
1515                     &          srcv(jpr_itx2)%clgrid, ztx, zty )
1516                  frcv(jpr_itx2)%z3(:,:,1) = ztx(:,:)   ! overwrite 1st comp. on the 2nd grid
1517                  frcv(jpr_ity2)%z3(:,:,1) = zty(:,:)   ! overwrite 2nd comp. on the 2nd grid
1518               ENDIF
1519               !
1520            ENDIF
1521            !
1522            IF( TRIM( sn_rcv_tau%clvor ) == 'eastward-northward' ) THEN   ! 2 components oriented along the local grid
1523               !                                                       ! (geographical to local grid -> rotate the components)
1524               CALL rot_rep( frcv(jpr_itx1)%z3(:,:,1), frcv(jpr_ity1)%z3(:,:,1), srcv(jpr_itx1)%clgrid, 'en->i', ztx )   
1525               IF( srcv(jpr_itx2)%laction ) THEN
1526                  CALL rot_rep( frcv(jpr_itx2)%z3(:,:,1), frcv(jpr_ity2)%z3(:,:,1), srcv(jpr_itx2)%clgrid, 'en->j', zty )   
1527               ELSE
1528                  CALL rot_rep( frcv(jpr_itx1)%z3(:,:,1), frcv(jpr_ity1)%z3(:,:,1), srcv(jpr_itx1)%clgrid, 'en->j', zty ) 
1529               ENDIF
1530               frcv(jpr_itx1)%z3(:,:,1) = ztx(:,:)      ! overwrite 1st component on the 1st grid
1531               frcv(jpr_ity1)%z3(:,:,1) = zty(:,:)      ! overwrite 2nd component on the 1st grid
1532            ENDIF
1533            !                                                   ! ======================= !
1534         ELSE                                                   !     use ocean stress    !
1535            !                                                   ! ======================= !
1536            frcv(jpr_itx1)%z3(:,:,1) = frcv(jpr_otx1)%z3(:,:,1)
1537            frcv(jpr_ity1)%z3(:,:,1) = frcv(jpr_oty1)%z3(:,:,1)
1538            !
1539         ENDIF
1540         !                                                      ! ======================= !
1541         !                                                      !     put on ice grid     !
1542         !                                                      ! ======================= !
1543         !   
1544         !                                                  j+1   j     -----V---F
1545         ! ice stress on ice velocity point                              !       |
1546         ! (C-grid ==>(U,V))                                      j      |   T   U
1547         !                                                               |       |
1548         !                                                   j    j-1   -I-------|
1549         !                                               (for I)         |       |
1550         !                                                              i-1  i   i
1551         !                                                               i      i+1 (for I)
1552         SELECT CASE ( srcv(jpr_itx1)%clgrid )
1553         CASE( 'U' )
1554            p_taui(:,:) = frcv(jpr_itx1)%z3(:,:,1)                   ! (U,V) ==> (U,V)
1555            p_tauj(:,:) = frcv(jpr_ity1)%z3(:,:,1)
1556         CASE( 'F' )
1557            DO jj = 2, jpjm1                                   ! F ==> (U,V)
1558               DO ji = fs_2, fs_jpim1   ! vector opt.
1559                  p_taui(ji,jj) = 0.5 * ( frcv(jpr_itx1)%z3(ji,jj,1) + frcv(jpr_itx1)%z3(ji  ,jj-1,1) )
1560                  p_tauj(ji,jj) = 0.5 * ( frcv(jpr_ity1)%z3(ji,jj,1) + frcv(jpr_ity1)%z3(ji-1,jj  ,1) )
1561               END DO
1562            END DO
1563         CASE( 'T' )
1564            DO jj = 2, jpjm1                                   ! T ==> (U,V)
1565               DO ji = fs_2, fs_jpim1   ! vector opt.
1566                  p_taui(ji,jj) = 0.5 * ( frcv(jpr_itx1)%z3(ji+1,jj  ,1) + frcv(jpr_itx1)%z3(ji,jj,1) )
1567                  p_tauj(ji,jj) = 0.5 * ( frcv(jpr_ity1)%z3(ji  ,jj+1,1) + frcv(jpr_ity1)%z3(ji,jj,1) )
1568               END DO
1569            END DO
1570         CASE( 'I' )
1571            DO jj = 2, jpjm1                                   ! I ==> (U,V)
1572               DO ji = 2, jpim1   ! NO vector opt.
1573                  p_taui(ji,jj) = 0.5 * ( frcv(jpr_itx1)%z3(ji+1,jj+1,1) + frcv(jpr_itx1)%z3(ji+1,jj  ,1) )
1574                  p_tauj(ji,jj) = 0.5 * ( frcv(jpr_ity1)%z3(ji+1,jj+1,1) + frcv(jpr_ity1)%z3(ji  ,jj+1,1) )
1575               END DO
1576            END DO
1577         END SELECT
1578         IF( srcv(jpr_itx1)%clgrid /= 'U' ) THEN
1579            CALL lbc_lnk_multi( 'sbccpl', p_taui, 'U',  -1., p_tauj, 'V',  -1. )
1580         ENDIF
1581         
1582      ENDIF
1583      !
1584   END SUBROUTINE sbc_cpl_ice_tau
1585   
1586
1587   SUBROUTINE sbc_cpl_ice_flx( picefr, palbi, psst, pist, phs, phi )
1588      !!----------------------------------------------------------------------
1589      !!             ***  ROUTINE sbc_cpl_ice_flx  ***
1590      !!
1591      !! ** Purpose :   provide the heat and freshwater fluxes of the ocean-ice system
1592      !!
1593      !! ** Method  :   transform the fields received from the atmosphere into
1594      !!             surface heat and fresh water boundary condition for the
1595      !!             ice-ocean system. The following fields are provided:
1596      !!               * total non solar, solar and freshwater fluxes (qns_tot,
1597      !!             qsr_tot and emp_tot) (total means weighted ice-ocean flux)
1598      !!             NB: emp_tot include runoffs and calving.
1599      !!               * fluxes over ice (qns_ice, qsr_ice, emp_ice) where
1600      !!             emp_ice = sublimation - solid precipitation as liquid
1601      !!             precipitation are re-routed directly to the ocean and
1602      !!             calving directly enter the ocean (runoffs are read but included in trasbc.F90)
1603      !!               * solid precipitation (sprecip), used to add to qns_tot
1604      !!             the heat lost associated to melting solid precipitation
1605      !!             over the ocean fraction.
1606      !!               * heat content of rain, snow and evap can also be provided,
1607      !!             otherwise heat flux associated with these mass flux are
1608      !!             guessed (qemp_oce, qemp_ice)
1609      !!
1610      !!             - the fluxes have been separated from the stress as
1611      !!               (a) they are updated at each ice time step compare to
1612      !!               an update at each coupled time step for the stress, and
1613      !!               (b) the conservative computation of the fluxes over the
1614      !!               sea-ice area requires the knowledge of the ice fraction
1615      !!               after the ice advection and before the ice thermodynamics,
1616      !!               so that the stress is updated before the ice dynamics
1617      !!               while the fluxes are updated after it.
1618      !!
1619      !! ** Details
1620      !!             qns_tot = (1-a) * qns_oce + a * qns_ice               => provided
1621      !!                     + qemp_oce + qemp_ice                         => recalculated and added up to qns
1622      !!
1623      !!             qsr_tot = (1-a) * qsr_oce + a * qsr_ice               => provided
1624      !!
1625      !!             emp_tot = emp_oce + emp_ice                           => calving is provided and added to emp_tot (and emp_oce).
1626      !!                                                                      runoff (which includes rivers+icebergs) and iceshelf
1627      !!                                                                      are provided but not included in emp here. Only runoff will
1628      !!                                                                      be included in emp in other parts of NEMO code
1629      !! ** Action  :   update at each nf_ice time step:
1630      !!                   qns_tot, qsr_tot  non-solar and solar total heat fluxes
1631      !!                   qns_ice, qsr_ice  non-solar and solar heat fluxes over the ice
1632      !!                   emp_tot           total evaporation - precipitation(liquid and solid) (-calving)
1633      !!                   emp_ice           ice sublimation - solid precipitation over the ice
1634      !!                   dqns_ice          d(non-solar heat flux)/d(Temperature) over the ice
1635      !!                   sprecip           solid precipitation over the ocean 
1636      !!----------------------------------------------------------------------
1637      REAL(wp), INTENT(in), DIMENSION(:,:)             ::   picefr     ! ice fraction                [0 to 1]
1638      !                                                !!           ! optional arguments, used only in 'mixed oce-ice' case
1639      REAL(wp), INTENT(in), DIMENSION(:,:,:), OPTIONAL ::   palbi      ! all skies ice albedo
1640      REAL(wp), INTENT(in), DIMENSION(:,:  ), OPTIONAL ::   psst       ! sea surface temperature     [Celsius]
1641      REAL(wp), INTENT(in), DIMENSION(:,:,:), OPTIONAL ::   pist       ! ice surface temperature     [Kelvin]
1642      REAL(wp), INTENT(in), DIMENSION(:,:,:), OPTIONAL ::   phs        ! snow depth                  [m]
1643      REAL(wp), INTENT(in), DIMENSION(:,:,:), OPTIONAL ::   phi        ! ice thickness               [m]
1644      !
1645      INTEGER  ::   ji, jj, jl   ! dummy loop index
1646      REAL(wp) ::   ztri         ! local scalar
1647      REAL(wp), DIMENSION(jpi,jpj)     ::   zcptn, zcptrain, zcptsnw, ziceld, zmsk, zsnw
1648      REAL(wp), DIMENSION(jpi,jpj)     ::   zemp_tot, zemp_ice, zemp_oce, ztprecip, zsprecip  , zevap_oce, zdevap_ice
1649      REAL(wp), DIMENSION(jpi,jpj)     ::   zqns_tot, zqns_oce, zqsr_tot, zqsr_oce, zqprec_ice, zqemp_oce, zqemp_ice
1650      REAL(wp), DIMENSION(jpi,jpj,jpl) ::   zqns_ice, zqsr_ice, zdqns_ice, zqevap_ice, zevap_ice    !!gm , zfrqsr_tr_i
1651      !!----------------------------------------------------------------------
1652      !
1653      IF( ln_mixcpl )   zmsk(:,:) = 1. - xcplmask(:,:,0)
1654      ziceld(:,:) = 1._wp - picefr(:,:)
1655      zcptn (:,:) = rcp * sst_m(:,:)
1656      !
1657      !                                                      ! ========================= !
1658      !                                                      !    freshwater budget      !   (emp_tot)
1659      !                                                      ! ========================= !
1660      !
1661      !                                                           ! solid Precipitation                                (sprecip)
1662      !                                                           ! liquid + solid Precipitation                       (tprecip)
1663      !                                                           ! total Evaporation - total Precipitation            (emp_tot)
1664      !                                                           ! sublimation - solid precipitation (cell average)   (emp_ice)
1665      SELECT CASE( TRIM( sn_rcv_emp%cldes ) )
1666      CASE( 'conservative' )   ! received fields: jpr_rain, jpr_snow, jpr_ievp, jpr_tevp
1667         zsprecip(:,:) =   frcv(jpr_snow)%z3(:,:,1)                  ! May need to ensure positive here
1668         ztprecip(:,:) =   frcv(jpr_rain)%z3(:,:,1) + zsprecip(:,:)  ! May need to ensure positive here
1669         zemp_tot(:,:) =   frcv(jpr_tevp)%z3(:,:,1) - ztprecip(:,:)
1670         zemp_ice(:,:) = ( frcv(jpr_ievp)%z3(:,:,1) - frcv(jpr_snow)%z3(:,:,1) ) * picefr(:,:)
1671      CASE( 'oce and ice'   )   ! received fields: jpr_sbpr, jpr_semp, jpr_oemp, jpr_ievp
1672         zemp_tot(:,:) = ziceld(:,:) * frcv(jpr_oemp)%z3(:,:,1) + picefr(:,:) * frcv(jpr_sbpr)%z3(:,:,1)
1673         zemp_ice(:,:) = frcv(jpr_semp)%z3(:,:,1) * picefr(:,:)
1674         zsprecip(:,:) = frcv(jpr_ievp)%z3(:,:,1) - frcv(jpr_semp)%z3(:,:,1)
1675         ztprecip(:,:) = frcv(jpr_semp)%z3(:,:,1) - frcv(jpr_sbpr)%z3(:,:,1) + zsprecip(:,:)
1676      CASE( 'none'      )       ! Not available as for now: needs additional coding below when computing zevap_oce
1677      !                         ! since fields received are not defined with none option
1678         CALL ctl_stop( 'STOP', 'sbccpl/sbc_cpl_ice_flx: some fields are not defined. Change sn_rcv_emp value in namelist namsbc_cpl' )
1679      END SELECT
1680
1681#if defined key_si3
1682      ! zsnw = snow fraction over ice after wind blowing (=picefr if no blowing)
1683      zsnw(:,:) = 0._wp   ;   CALL ice_thd_snwblow( ziceld, zsnw )
1684     
1685      ! --- evaporation minus precipitation corrected (because of wind blowing on snow) --- !
1686      zemp_ice(:,:) = zemp_ice(:,:) + zsprecip(:,:) * ( picefr(:,:) - zsnw(:,:) )  ! emp_ice = A * sublimation - zsnw * sprecip
1687      zemp_oce(:,:) = zemp_tot(:,:) - zemp_ice(:,:)                                ! emp_oce = emp_tot - emp_ice
1688
1689      ! --- evaporation over ocean (used later for qemp) --- !
1690      zevap_oce(:,:) = frcv(jpr_tevp)%z3(:,:,1) - frcv(jpr_ievp)%z3(:,:,1) * picefr(:,:)
1691
1692      ! --- evaporation over ice (kg/m2/s) --- !
1693      DO jl=1,jpl
1694         IF (sn_rcv_emp%clcat == 'yes') THEN   ;   zevap_ice(:,:,jl) = frcv(jpr_ievp)%z3(:,:,jl)
1695         ELSE                                  ;   zevap_ice(:,:,jl) = frcv(jpr_ievp)%z3(:,:,1 )   ;   ENDIF
1696      ENDDO
1697
1698      ! since the sensitivity of evap to temperature (devap/dT) is not prescribed by the atmosphere, we set it to 0
1699      ! therefore, sublimation is not redistributed over the ice categories when no subgrid scale fluxes are provided by atm.
1700      zdevap_ice(:,:) = 0._wp
1701     
1702      ! --- Continental fluxes --- !
1703      IF( srcv(jpr_rnf)%laction ) THEN   ! runoffs (included in emp later on)
1704         rnf(:,:) = frcv(jpr_rnf)%z3(:,:,1)
1705      ENDIF
1706      IF( srcv(jpr_cal)%laction ) THEN   ! calving (put in emp_tot and emp_oce)
1707         zemp_tot(:,:) = zemp_tot(:,:) - frcv(jpr_cal)%z3(:,:,1)
1708         zemp_oce(:,:) = zemp_oce(:,:) - frcv(jpr_cal)%z3(:,:,1)
1709      ENDIF
1710      IF( srcv(jpr_icb)%laction ) THEN   ! iceberg added to runoffs
1711         fwficb(:,:) = frcv(jpr_icb)%z3(:,:,1)
1712         rnf(:,:)    = rnf(:,:) + fwficb(:,:)
1713      ENDIF
1714      IF( srcv(jpr_isf)%laction ) THEN   ! iceshelf (fwfisf <0 mean melting)
1715        fwfisf_oasis(:,:) = - frcv(jpr_isf)%z3(:,:,1) 
1716      ENDIF
1717
1718      IF( ln_mixcpl ) THEN
1719         emp_tot(:,:) = emp_tot(:,:) * xcplmask(:,:,0) + zemp_tot(:,:) * zmsk(:,:)
1720         emp_ice(:,:) = emp_ice(:,:) * xcplmask(:,:,0) + zemp_ice(:,:) * zmsk(:,:)
1721         emp_oce(:,:) = emp_oce(:,:) * xcplmask(:,:,0) + zemp_oce(:,:) * zmsk(:,:)
1722         sprecip(:,:) = sprecip(:,:) * xcplmask(:,:,0) + zsprecip(:,:) * zmsk(:,:)
1723         tprecip(:,:) = tprecip(:,:) * xcplmask(:,:,0) + ztprecip(:,:) * zmsk(:,:)
1724         DO jl = 1, jpl
1725            evap_ice (:,:,jl) = evap_ice (:,:,jl) * xcplmask(:,:,0) + zevap_ice (:,:,jl) * zmsk(:,:)
1726            devap_ice(:,:,jl) = devap_ice(:,:,jl) * xcplmask(:,:,0) + zdevap_ice(:,:)    * zmsk(:,:)
1727         END DO
1728      ELSE
1729         emp_tot (:,:)   = zemp_tot (:,:)
1730         emp_ice (:,:)   = zemp_ice (:,:)
1731         emp_oce (:,:)   = zemp_oce (:,:)     
1732         sprecip (:,:)   = zsprecip (:,:)
1733         tprecip (:,:)   = ztprecip (:,:)
1734         evap_ice(:,:,:) = zevap_ice(:,:,:)
1735         DO jl = 1, jpl
1736            devap_ice(:,:,jl) = zdevap_ice(:,:)
1737         END DO
1738      ENDIF
1739
1740#else
1741      zsnw(:,:) = picefr(:,:)
1742      ! --- Continental fluxes --- !
1743      IF( srcv(jpr_rnf)%laction ) THEN   ! runoffs (included in emp later on)
1744         rnf(:,:) = frcv(jpr_rnf)%z3(:,:,1)
1745      ENDIF
1746      IF( srcv(jpr_cal)%laction ) THEN   ! calving (put in emp_tot)
1747         zemp_tot(:,:) = zemp_tot(:,:) - frcv(jpr_cal)%z3(:,:,1)
1748      ENDIF
1749      IF( srcv(jpr_icb)%laction ) THEN   ! iceberg added to runoffs
1750         fwficb(:,:) = frcv(jpr_icb)%z3(:,:,1)
1751         rnf(:,:)    = rnf(:,:) + fwficb(:,:)
1752      ENDIF
1753      IF( srcv(jpr_isf)%laction ) THEN   ! iceshelf (fwfisf <0 mean melting)
1754        fwfisf_oasis(:,:) = - frcv(jpr_isf)%z3(:,:,1)
1755      ENDIF
1756      !
1757      IF( ln_mixcpl ) THEN
1758         emp_tot(:,:) = emp_tot(:,:) * xcplmask(:,:,0) + zemp_tot(:,:) * zmsk(:,:)
1759         emp_ice(:,:) = emp_ice(:,:) * xcplmask(:,:,0) + zemp_ice(:,:) * zmsk(:,:)
1760         sprecip(:,:) = sprecip(:,:) * xcplmask(:,:,0) + zsprecip(:,:) * zmsk(:,:)
1761         tprecip(:,:) = tprecip(:,:) * xcplmask(:,:,0) + ztprecip(:,:) * zmsk(:,:)
1762      ELSE
1763         emp_tot(:,:) =                                  zemp_tot(:,:)
1764         emp_ice(:,:) =                                  zemp_ice(:,:)
1765         sprecip(:,:) =                                  zsprecip(:,:)
1766         tprecip(:,:) =                                  ztprecip(:,:)
1767      ENDIF
1768      !
1769#endif
1770
1771      ! outputs
1772!!      IF( srcv(jpr_rnf)%laction )   CALL iom_put( 'runoffs' , rnf(:,:) * tmask(:,:,1)                                 )  ! runoff
1773!!      IF( srcv(jpr_isf)%laction )   CALL iom_put( 'iceshelf_cea', -fwfisf(:,:) * tmask(:,:,1)                         )  ! iceshelf
1774      IF( srcv(jpr_cal)%laction )   CALL iom_put( 'calving_cea' , frcv(jpr_cal)%z3(:,:,1) * tmask(:,:,1)                )  ! calving
1775      IF( srcv(jpr_icb)%laction )   CALL iom_put( 'iceberg_cea' , frcv(jpr_icb)%z3(:,:,1) * tmask(:,:,1)                )  ! icebergs
1776      IF( iom_use('snowpre') )      CALL iom_put( 'snowpre'     , sprecip(:,:)                                          )  ! Snow
1777      IF( iom_use('precip') )       CALL iom_put( 'precip'      , tprecip(:,:)                                          )  ! total  precipitation
1778      IF( iom_use('rain') )         CALL iom_put( 'rain'        , tprecip(:,:) - sprecip(:,:)                           )  ! liquid precipitation
1779      IF( iom_use('snow_ao_cea') )  CALL iom_put( 'snow_ao_cea' , sprecip(:,:) * ( 1._wp - zsnw(:,:) )                  )  ! Snow over ice-free ocean  (cell average)
1780      IF( iom_use('snow_ai_cea') )  CALL iom_put( 'snow_ai_cea' , sprecip(:,:) *           zsnw(:,:)                    )  ! Snow over sea-ice         (cell average)
1781      IF( iom_use('subl_ai_cea') )  CALL iom_put( 'subl_ai_cea' , frcv(jpr_ievp)%z3(:,:,1) * picefr(:,:) * tmask(:,:,1) )  ! Sublimation over sea-ice (cell average)
1782      IF( iom_use('evap_ao_cea') )  CALL iom_put( 'evap_ao_cea' , ( frcv(jpr_tevp)%z3(:,:,1)  &
1783         &                                                        - frcv(jpr_ievp)%z3(:,:,1) * picefr(:,:) ) * tmask(:,:,1) )  ! ice-free oce evap (cell average)
1784      ! note: runoff output is done in sbcrnf (which includes icebergs too) and iceshelf output is done in sbcisf
1785      !
1786      !                                                      ! ========================= !
1787      SELECT CASE( TRIM( sn_rcv_qns%cldes ) )                !   non solar heat fluxes   !   (qns)
1788      !                                                      ! ========================= !
1789      CASE( 'oce only' )         ! the required field is directly provided
1790         zqns_tot(:,:) = frcv(jpr_qnsoce)%z3(:,:,1)
1791      CASE( 'conservative' )     ! the required fields are directly provided
1792         zqns_tot(:,:) = frcv(jpr_qnsmix)%z3(:,:,1)
1793         IF ( TRIM(sn_rcv_qns%clcat) == 'yes' ) THEN
1794            zqns_ice(:,:,1:jpl) = frcv(jpr_qnsice)%z3(:,:,1:jpl)
1795         ELSE
1796            DO jl = 1, jpl
1797               zqns_ice(:,:,jl) = frcv(jpr_qnsice)%z3(:,:,1) ! Set all category values equal
1798            END DO
1799         ENDIF
1800      CASE( 'oce and ice' )      ! the total flux is computed from ocean and ice fluxes
1801         zqns_tot(:,:) =  ziceld(:,:) * frcv(jpr_qnsoce)%z3(:,:,1)
1802         IF ( TRIM(sn_rcv_qns%clcat) == 'yes' ) THEN
1803            DO jl=1,jpl
1804               zqns_tot(:,:   ) = zqns_tot(:,:) + a_i(:,:,jl) * frcv(jpr_qnsice)%z3(:,:,jl)   
1805               zqns_ice(:,:,jl) = frcv(jpr_qnsice)%z3(:,:,jl)
1806            ENDDO
1807         ELSE
1808            qns_tot(:,:) = qns_tot(:,:) + picefr(:,:) * frcv(jpr_qnsice)%z3(:,:,1)
1809            DO jl = 1, jpl
1810               zqns_tot(:,:   ) = zqns_tot(:,:) + picefr(:,:) * frcv(jpr_qnsice)%z3(:,:,1)
1811               zqns_ice(:,:,jl) = frcv(jpr_qnsice)%z3(:,:,1)
1812            END DO
1813         ENDIF
1814      CASE( 'mixed oce-ice' )    ! the ice flux is cumputed from the total flux, the SST and ice informations
1815! ** NEED TO SORT OUT HOW THIS SHOULD WORK IN THE MULTI-CATEGORY CASE - CURRENTLY NOT ALLOWED WHEN INTERFACE INITIALISED **
1816         zqns_tot(:,:  ) = frcv(jpr_qnsmix)%z3(:,:,1)
1817         zqns_ice(:,:,1) = frcv(jpr_qnsmix)%z3(:,:,1)    &
1818            &            + frcv(jpr_dqnsdt)%z3(:,:,1) * ( pist(:,:,1) - ( (rt0 + psst(:,:  ) ) * ziceld(:,:)   &
1819            &                                           + pist(:,:,1) * picefr(:,:) ) )
1820      END SELECT
1821      !                                     
1822      ! --- calving (removed from qns_tot) --- !
1823      IF( srcv(jpr_cal)%laction )   zqns_tot(:,:) = zqns_tot(:,:) - frcv(jpr_cal)%z3(:,:,1) * rLfus  ! remove latent heat of calving
1824                                                                                                     ! we suppose it melts at 0deg, though it should be temp. of surrounding ocean
1825      ! --- iceberg (removed from qns_tot) --- !
1826      IF( srcv(jpr_icb)%laction )   zqns_tot(:,:) = zqns_tot(:,:) - frcv(jpr_icb)%z3(:,:,1) * rLfus  ! remove latent heat of iceberg melting
1827
1828#if defined key_si3     
1829      ! --- non solar flux over ocean --- !
1830      !         note: ziceld cannot be = 0 since we limit the ice concentration to amax
1831      zqns_oce = 0._wp
1832      WHERE( ziceld /= 0._wp )   zqns_oce(:,:) = ( zqns_tot(:,:) - SUM( a_i * zqns_ice, dim=3 ) ) / ziceld(:,:)
1833
1834      ! Heat content per unit mass of snow (J/kg)
1835      WHERE( SUM( a_i, dim=3 ) > 1.e-10 )   ;   zcptsnw(:,:) = rcpi * SUM( (tn_ice - rt0) * a_i, dim=3 ) / SUM( a_i, dim=3 )
1836      ELSEWHERE                             ;   zcptsnw(:,:) = zcptn(:,:)
1837      ENDWHERE
1838      ! Heat content per unit mass of rain (J/kg)
1839      zcptrain(:,:) = rcp * ( SUM( (tn_ice(:,:,:) - rt0) * a_i(:,:,:), dim=3 ) + sst_m(:,:) * ziceld(:,:) ) 
1840
1841      ! --- enthalpy of snow precip over ice in J/m3 (to be used in 1D-thermo) --- !
1842      zqprec_ice(:,:) = rhos * ( zcptsnw(:,:) - rLfus )
1843
1844      ! --- heat content of evap over ice in W/m2 (to be used in 1D-thermo) --- !
1845      DO jl = 1, jpl
1846         zqevap_ice(:,:,jl) = 0._wp ! should be -evap * ( ( Tice - rt0 ) * rcpi ) but atm. does not take it into account
1847      END DO
1848
1849      ! --- heat flux associated with emp (W/m2) --- !
1850      zqemp_oce(:,:) = -  zevap_oce(:,:)                                      *   zcptn   (:,:)   &        ! evap
1851         &             + ( ztprecip(:,:) - zsprecip(:,:) )                    *   zcptrain(:,:)   &        ! liquid precip
1852         &             +   zsprecip(:,:)                   * ( 1._wp - zsnw ) * ( zcptsnw (:,:) - rLfus )  ! solid precip over ocean + snow melting
1853      zqemp_ice(:,:) =     zsprecip(:,:)                   * zsnw             * ( zcptsnw (:,:) - rLfus )  ! solid precip over ice (qevap_ice=0 since atm. does not take it into account)
1854!!    zqemp_ice(:,:) = -   frcv(jpr_ievp)%z3(:,:,1)        * picefr(:,:)      *   zcptsnw (:,:)   &        ! ice evap
1855!!       &             +   zsprecip(:,:)                   * zsnw             * zqprec_ice(:,:) * r1_rhos  ! solid precip over ice
1856     
1857      ! --- total non solar flux (including evap/precip) --- !
1858      zqns_tot(:,:) = zqns_tot(:,:) + zqemp_ice(:,:) + zqemp_oce(:,:)
1859
1860      ! --- in case both coupled/forced are active, we must mix values --- !
1861      IF( ln_mixcpl ) THEN
1862         qns_tot(:,:) = qns_tot(:,:) * xcplmask(:,:,0) + zqns_tot(:,:)* zmsk(:,:)
1863         qns_oce(:,:) = qns_oce(:,:) * xcplmask(:,:,0) + zqns_oce(:,:)* zmsk(:,:)
1864         DO jl=1,jpl
1865            qns_ice  (:,:,jl) = qns_ice  (:,:,jl) * xcplmask(:,:,0) +  zqns_ice  (:,:,jl)* zmsk(:,:)
1866            qevap_ice(:,:,jl) = qevap_ice(:,:,jl) * xcplmask(:,:,0) +  zqevap_ice(:,:,jl)* zmsk(:,:)
1867         ENDDO
1868         qprec_ice(:,:) = qprec_ice(:,:) * xcplmask(:,:,0) + zqprec_ice(:,:)* zmsk(:,:)
1869         qemp_oce (:,:) =  qemp_oce(:,:) * xcplmask(:,:,0) +  zqemp_oce(:,:)* zmsk(:,:)
1870         qemp_ice (:,:) =  qemp_ice(:,:) * xcplmask(:,:,0) +  zqemp_ice(:,:)* zmsk(:,:)
1871      ELSE
1872         qns_tot  (:,:  ) = zqns_tot  (:,:  )
1873         qns_oce  (:,:  ) = zqns_oce  (:,:  )
1874         qns_ice  (:,:,:) = zqns_ice  (:,:,:)
1875         qevap_ice(:,:,:) = zqevap_ice(:,:,:)
1876         qprec_ice(:,:  ) = zqprec_ice(:,:  )
1877         qemp_oce (:,:  ) = zqemp_oce (:,:  )
1878         qemp_ice (:,:  ) = zqemp_ice (:,:  )
1879      ENDIF
1880
1881#else
1882      zcptsnw (:,:) = zcptn(:,:)
1883      zcptrain(:,:) = zcptn(:,:)
1884     
1885      ! clem: this formulation is certainly wrong... but better than it was...
1886      zqns_tot(:,:) = zqns_tot(:,:)                             &          ! zqns_tot update over free ocean with:
1887         &          - (  ziceld(:,:) * zsprecip(:,:) * rLfus )  &          ! remove the latent heat flux of solid precip. melting
1888         &          - (  zemp_tot(:,:)                          &          ! remove the heat content of mass flux (assumed to be at SST)
1889         &             - zemp_ice(:,:) ) * zcptn(:,:) 
1890
1891     IF( ln_mixcpl ) THEN
1892         qns_tot(:,:) = qns(:,:) * ziceld(:,:) + SUM( qns_ice(:,:,:) * a_i(:,:,:), dim=3 )   ! total flux from blk
1893         qns_tot(:,:) = qns_tot(:,:) * xcplmask(:,:,0) +  zqns_tot(:,:)* zmsk(:,:)
1894         DO jl=1,jpl
1895            qns_ice(:,:,jl) = qns_ice(:,:,jl) * xcplmask(:,:,0) +  zqns_ice(:,:,jl)* zmsk(:,:)
1896         ENDDO
1897      ELSE
1898         qns_tot(:,:  ) = zqns_tot(:,:  )
1899         qns_ice(:,:,:) = zqns_ice(:,:,:)
1900      ENDIF
1901
1902#endif
1903      ! outputs
1904      IF ( srcv(jpr_cal)%laction       ) CALL iom_put('hflx_cal_cea'    , - frcv(jpr_cal)%z3(:,:,1) * rLfus )                      ! latent heat from calving
1905      IF ( srcv(jpr_icb)%laction       ) CALL iom_put('hflx_icb_cea'    , - frcv(jpr_icb)%z3(:,:,1) * rLfus )                      ! latent heat from icebergs melting
1906      IF ( iom_use('hflx_rain_cea')    ) CALL iom_put('hflx_rain_cea'   , ( tprecip(:,:) - sprecip(:,:) ) * zcptrain(:,:) )        ! heat flux from rain (cell average)
1907      IF ( iom_use('hflx_evap_cea')    ) CALL iom_put('hflx_evap_cea'   , ( frcv(jpr_tevp)%z3(:,:,1) - frcv(jpr_ievp)%z3(:,:,1) &
1908           &                                                              * picefr(:,:) ) * zcptn(:,:) * tmask(:,:,1) )            ! heat flux from evap (cell average)
1909      IF ( iom_use('hflx_snow_cea')    ) CALL iom_put('hflx_snow_cea'   , sprecip(:,:) * ( zcptsnw(:,:) - rLfus )  )               ! heat flux from snow (cell average)
1910      IF ( iom_use('hflx_snow_ao_cea') ) CALL iom_put('hflx_snow_ao_cea', sprecip(:,:) * ( zcptsnw(:,:) - rLfus ) &
1911           &                                                              * ( 1._wp - zsnw(:,:) )                  )               ! heat flux from snow (over ocean)
1912      IF ( iom_use('hflx_snow_ai_cea') ) CALL iom_put('hflx_snow_ai_cea', sprecip(:,:) * ( zcptsnw(:,:) - rLfus ) & 
1913           &                                                              *           zsnw(:,:)                    )               ! heat flux from snow (over ice)
1914      ! note: hflx for runoff and iceshelf are done in sbcrnf and sbcisf resp.
1915      !
1916      !                                                      ! ========================= !
1917      SELECT CASE( TRIM( sn_rcv_qsr%cldes ) )                !      solar heat fluxes    !   (qsr)
1918      !                                                      ! ========================= !
1919      CASE( 'oce only' )
1920         zqsr_tot(:,:  ) = MAX( 0._wp , frcv(jpr_qsroce)%z3(:,:,1) )
1921      CASE( 'conservative' )
1922         zqsr_tot(:,:  ) = frcv(jpr_qsrmix)%z3(:,:,1)
1923         IF ( TRIM(sn_rcv_qsr%clcat) == 'yes' ) THEN
1924            zqsr_ice(:,:,1:jpl) = frcv(jpr_qsrice)%z3(:,:,1:jpl)
1925         ELSE
1926            ! Set all category values equal for the moment
1927            DO jl = 1, jpl
1928               zqsr_ice(:,:,jl) = frcv(jpr_qsrice)%z3(:,:,1)
1929            END DO
1930         ENDIF
1931         zqsr_tot(:,:  ) = frcv(jpr_qsrmix)%z3(:,:,1)
1932         zqsr_ice(:,:,1) = frcv(jpr_qsrice)%z3(:,:,1)
1933      CASE( 'oce and ice' )
1934         zqsr_tot(:,:  ) =  ziceld(:,:) * frcv(jpr_qsroce)%z3(:,:,1)
1935         IF ( TRIM(sn_rcv_qsr%clcat) == 'yes' ) THEN
1936            DO jl = 1, jpl
1937               zqsr_tot(:,:   ) = zqsr_tot(:,:) + a_i(:,:,jl) * frcv(jpr_qsrice)%z3(:,:,jl)   
1938               zqsr_ice(:,:,jl) = frcv(jpr_qsrice)%z3(:,:,jl)
1939            END DO
1940         ELSE
1941            qsr_tot(:,:   ) = qsr_tot(:,:) + picefr(:,:) * frcv(jpr_qsrice)%z3(:,:,1)
1942            DO jl = 1, jpl
1943               zqsr_tot(:,:   ) = zqsr_tot(:,:) + picefr(:,:) * frcv(jpr_qsrice)%z3(:,:,1)
1944               zqsr_ice(:,:,jl) = frcv(jpr_qsrice)%z3(:,:,1)
1945            END DO
1946         ENDIF
1947      CASE( 'mixed oce-ice' )
1948         zqsr_tot(:,:  ) = frcv(jpr_qsrmix)%z3(:,:,1)
1949! ** NEED TO SORT OUT HOW THIS SHOULD WORK IN THE MULTI-CATEGORY CASE - CURRENTLY NOT ALLOWED WHEN INTERFACE INITIALISED **
1950!       Create solar heat flux over ice using incoming solar heat flux and albedos
1951!       ( see OASIS3 user guide, 5th edition, p39 )
1952         zqsr_ice(:,:,1) = frcv(jpr_qsrmix)%z3(:,:,1) * ( 1.- palbi(:,:,1) )   &
1953            &            / (  1.- ( alb_oce_mix(:,:  ) * ziceld(:,:)       &
1954            &                     + palbi      (:,:,1) * picefr(:,:) ) )
1955      CASE( 'none'      )       ! Not available as for now: needs additional coding 
1956      !                         ! since fields received, here zqsr_tot,  are not defined with none option
1957         CALL ctl_stop( 'STOP', 'sbccpl/sbc_cpl_ice_flx: some fields are not defined. Change sn_rcv_qsr value in namelist namsbc_cpl' )
1958      END SELECT
1959      IF( ln_dm2dc .AND. ln_cpl ) THEN   ! modify qsr to include the diurnal cycle
1960         zqsr_tot(:,:  ) = sbc_dcy( zqsr_tot(:,:  ) )
1961         DO jl = 1, jpl
1962            zqsr_ice(:,:,jl) = sbc_dcy( zqsr_ice(:,:,jl) )
1963         END DO
1964      ENDIF
1965
1966#if defined key_si3
1967      ! --- solar flux over ocean --- !
1968      !         note: ziceld cannot be = 0 since we limit the ice concentration to amax
1969      zqsr_oce = 0._wp
1970      WHERE( ziceld /= 0._wp )  zqsr_oce(:,:) = ( zqsr_tot(:,:) - SUM( a_i * zqsr_ice, dim=3 ) ) / ziceld(:,:)
1971
1972      IF( ln_mixcpl ) THEN   ;   qsr_oce(:,:) = qsr_oce(:,:) * xcplmask(:,:,0) +  zqsr_oce(:,:)* zmsk(:,:)
1973      ELSE                   ;   qsr_oce(:,:) = zqsr_oce(:,:)   ;   ENDIF
1974#endif
1975
1976      IF( ln_mixcpl ) THEN
1977         qsr_tot(:,:) = qsr(:,:) * ziceld(:,:) + SUM( qsr_ice(:,:,:) * a_i(:,:,:), dim=3 )   ! total flux from blk
1978         qsr_tot(:,:) = qsr_tot(:,:) * xcplmask(:,:,0) +  zqsr_tot(:,:)* zmsk(:,:)
1979         DO jl = 1, jpl
1980            qsr_ice(:,:,jl) = qsr_ice(:,:,jl) * xcplmask(:,:,0) +  zqsr_ice(:,:,jl)* zmsk(:,:)
1981         END DO
1982      ELSE
1983         qsr_tot(:,:  ) = zqsr_tot(:,:  )
1984         qsr_ice(:,:,:) = zqsr_ice(:,:,:)
1985      ENDIF
1986
1987      !                                                      ! ========================= !
1988      SELECT CASE( TRIM( sn_rcv_dqnsdt%cldes ) )             !          d(qns)/dt        !
1989      !                                                      ! ========================= !
1990      CASE ('coupled')
1991         IF ( TRIM(sn_rcv_dqnsdt%clcat) == 'yes' ) THEN
1992            zdqns_ice(:,:,1:jpl) = frcv(jpr_dqnsdt)%z3(:,:,1:jpl)
1993         ELSE
1994            ! Set all category values equal for the moment
1995            DO jl=1,jpl
1996               zdqns_ice(:,:,jl) = frcv(jpr_dqnsdt)%z3(:,:,1)
1997            ENDDO
1998         ENDIF
1999      END SELECT
2000     
2001      IF( ln_mixcpl ) THEN
2002         DO jl=1,jpl
2003            dqns_ice(:,:,jl) = dqns_ice(:,:,jl) * xcplmask(:,:,0) + zdqns_ice(:,:,jl) * zmsk(:,:)
2004         ENDDO
2005      ELSE
2006         dqns_ice(:,:,:) = zdqns_ice(:,:,:)
2007      ENDIF
2008
2009#if defined key_si3     
2010      !                                                      ! ========================= !
2011      SELECT CASE( TRIM( sn_rcv_iceflx%cldes ) )             !  ice topmelt and botmelt  !
2012      !                                                      ! ========================= !
2013      CASE ('coupled')
2014         qml_ice(:,:,:) = frcv(jpr_topm)%z3(:,:,:)
2015         qcn_ice(:,:,:) = frcv(jpr_botm)%z3(:,:,:)
2016      END SELECT
2017      !
2018      !                                                      ! ========================= !
2019      !                                                      !      Transmitted Qsr      !   [W/m2]
2020      !                                                      ! ========================= !
2021      IF( .NOT.ln_cndflx ) THEN                              !==  No conduction flux as surface forcing  ==!
2022         !
2023         !                    ! ===> used prescribed cloud fraction representative for polar oceans in summer (0.81)
2024         ztri = 0.18 * ( 1.0 - cldf_ice ) + 0.35 * cldf_ice    ! surface transmission parameter (Grenfell Maykut 77)
2025         !
2026         qtr_ice_top(:,:,:) = ztri * qsr_ice(:,:,:)
2027         WHERE( phs(:,:,:) >= 0.0_wp )   qtr_ice_top(:,:,:) = 0._wp            ! snow fully opaque
2028         WHERE( phi(:,:,:) <= 0.1_wp )   qtr_ice_top(:,:,:) = qsr_ice(:,:,:)   ! thin ice transmits all solar radiation
2029         !     
2030      ELSEIF( ln_cndflx .AND. .NOT.ln_cndemulate ) THEN      !==  conduction flux as surface forcing  ==!
2031         !
2032         !                    ! ===> here we must receive the qtr_ice_top array from the coupler
2033         !                           for now just assume zero (fully opaque ice)
2034         qtr_ice_top(:,:,:) = 0._wp
2035         !
2036      ENDIF
2037      !
2038#endif
2039      !
2040   END SUBROUTINE sbc_cpl_ice_flx
2041   
2042   
2043   SUBROUTINE sbc_cpl_snd( kt )
2044      !!----------------------------------------------------------------------
2045      !!             ***  ROUTINE sbc_cpl_snd  ***
2046      !!
2047      !! ** Purpose :   provide the ocean-ice informations to the atmosphere
2048      !!
2049      !! ** Method  :   send to the atmosphere through a call to cpl_snd
2050      !!              all the needed fields (as defined in sbc_cpl_init)
2051      !!----------------------------------------------------------------------
2052      INTEGER, INTENT(in) ::   kt
2053      !
2054      INTEGER ::   ji, jj, jl   ! dummy loop indices
2055      INTEGER ::   isec, info   ! local integer
2056      REAL(wp) ::   zumax, zvmax
2057      REAL(wp), DIMENSION(jpi,jpj)     ::   zfr_l, ztmp1, ztmp2, zotx1, zoty1, zotz1, zitx1, zity1, zitz1
2058      REAL(wp), DIMENSION(jpi,jpj,jpl) ::   ztmp3, ztmp4   
2059      !!----------------------------------------------------------------------
2060      !
2061      isec = ( kt - nit000 ) * NINT( rdt )        ! date of exchanges
2062
2063      zfr_l(:,:) = 1.- fr_i(:,:)
2064      !                                                      ! ------------------------- !
2065      !                                                      !    Surface temperature    !   in Kelvin
2066      !                                                      ! ------------------------- !
2067      IF( ssnd(jps_toce)%laction .OR. ssnd(jps_tice)%laction .OR. ssnd(jps_tmix)%laction ) THEN
2068         
2069         IF ( nn_components == jp_iam_opa ) THEN
2070            ztmp1(:,:) = tsn(:,:,1,jp_tem)   ! send temperature as it is (potential or conservative) -> use of l_useCT on the received part
2071         ELSE
2072            ! we must send the surface potential temperature
2073            IF( l_useCT )  THEN    ;   ztmp1(:,:) = eos_pt_from_ct( tsn(:,:,1,jp_tem), tsn(:,:,1,jp_sal) )
2074            ELSE                   ;   ztmp1(:,:) = tsn(:,:,1,jp_tem)
2075            ENDIF
2076            !
2077            SELECT CASE( sn_snd_temp%cldes)
2078            CASE( 'oce only'             )   ;   ztmp1(:,:) =   ztmp1(:,:) + rt0
2079            CASE( 'oce and ice'          )   ;   ztmp1(:,:) =   ztmp1(:,:) + rt0
2080               SELECT CASE( sn_snd_temp%clcat )
2081               CASE( 'yes' )   
2082                  ztmp3(:,:,1:jpl) = tn_ice(:,:,1:jpl)
2083               CASE( 'no' )
2084                  WHERE( SUM( a_i, dim=3 ) /= 0. )
2085                     ztmp3(:,:,1) = SUM( tn_ice * a_i, dim=3 ) / SUM( a_i, dim=3 )
2086                  ELSEWHERE
2087                     ztmp3(:,:,1) = rt0
2088                  END WHERE
2089               CASE default   ;   CALL ctl_stop( 'sbc_cpl_snd: wrong definition of sn_snd_temp%clcat' )
2090               END SELECT
2091            CASE( 'weighted oce and ice' )   ;   ztmp1(:,:) = ( ztmp1(:,:) + rt0 ) * zfr_l(:,:)   
2092               SELECT CASE( sn_snd_temp%clcat )
2093               CASE( 'yes' )   
2094                  ztmp3(:,:,1:jpl) = tn_ice(:,:,1:jpl) * a_i(:,:,1:jpl)
2095               CASE( 'no' )
2096                  ztmp3(:,:,:) = 0.0
2097                  DO jl=1,jpl
2098                     ztmp3(:,:,1) = ztmp3(:,:,1) + tn_ice(:,:,jl) * a_i(:,:,jl)
2099                  ENDDO
2100               CASE default                  ;   CALL ctl_stop( 'sbc_cpl_snd: wrong definition of sn_snd_temp%clcat' )
2101               END SELECT
2102            CASE( 'oce and weighted ice')    ;   ztmp1(:,:) =   tsn(:,:,1,jp_tem) + rt0 
2103               SELECT CASE( sn_snd_temp%clcat ) 
2104               CASE( 'yes' )   
2105                  ztmp3(:,:,1:jpl) = tn_ice(:,:,1:jpl) * a_i(:,:,1:jpl) 
2106               CASE( 'no' ) 
2107                  ztmp3(:,:,:) = 0.0 
2108                  DO jl=1,jpl 
2109                     ztmp3(:,:,1) = ztmp3(:,:,1) + tn_ice(:,:,jl) * a_i(:,:,jl) 
2110                  ENDDO 
2111               CASE default                  ;   CALL ctl_stop( 'sbc_cpl_snd: wrong definition of sn_snd_temp%clcat' ) 
2112               END SELECT
2113            CASE( 'mixed oce-ice'        )   
2114               ztmp1(:,:) = ( ztmp1(:,:) + rt0 ) * zfr_l(:,:) 
2115               DO jl=1,jpl
2116                  ztmp1(:,:) = ztmp1(:,:) + tn_ice(:,:,jl) * a_i(:,:,jl)
2117               ENDDO
2118            CASE default                     ;   CALL ctl_stop( 'sbc_cpl_snd: wrong definition of sn_snd_temp%cldes' )
2119            END SELECT
2120         ENDIF
2121         IF( ssnd(jps_toce)%laction )   CALL cpl_snd( jps_toce, isec, RESHAPE ( ztmp1, (/jpi,jpj,1/) ), info )
2122         IF( ssnd(jps_tice)%laction )   CALL cpl_snd( jps_tice, isec, ztmp3, info )
2123         IF( ssnd(jps_tmix)%laction )   CALL cpl_snd( jps_tmix, isec, RESHAPE ( ztmp1, (/jpi,jpj,1/) ), info )
2124      ENDIF
2125      !
2126      !                                                      ! ------------------------- !
2127      !                                                      ! 1st layer ice/snow temp.  !
2128      !                                                      ! ------------------------- !
2129#if defined key_si3
2130      ! needed by  Met Office
2131      IF( ssnd(jps_ttilyr)%laction) THEN
2132         SELECT CASE( sn_snd_ttilyr%cldes)
2133         CASE ('weighted ice')
2134            ztmp3(:,:,1:jpl) = t1_ice(:,:,1:jpl) * a_i(:,:,1:jpl) 
2135         CASE default                     ;   CALL ctl_stop( 'sbc_cpl_snd: wrong definition of sn_snd_ttilyr%cldes' )
2136         END SELECT
2137         IF( ssnd(jps_ttilyr)%laction )   CALL cpl_snd( jps_ttilyr, isec, ztmp3, info )
2138      ENDIF
2139#endif
2140      !                                                      ! ------------------------- !
2141      !                                                      !           Albedo          !
2142      !                                                      ! ------------------------- !
2143      IF( ssnd(jps_albice)%laction ) THEN                         ! ice
2144          SELECT CASE( sn_snd_alb%cldes )
2145          CASE( 'ice' )
2146             SELECT CASE( sn_snd_alb%clcat )
2147             CASE( 'yes' )   
2148                ztmp3(:,:,1:jpl) = alb_ice(:,:,1:jpl)
2149             CASE( 'no' )
2150                WHERE( SUM( a_i, dim=3 ) /= 0. )
2151                   ztmp1(:,:) = SUM( alb_ice (:,:,1:jpl) * a_i(:,:,1:jpl), dim=3 ) / SUM( a_i(:,:,1:jpl), dim=3 )
2152                ELSEWHERE
2153                   ztmp1(:,:) = alb_oce_mix(:,:)
2154                END WHERE
2155             CASE default   ;   CALL ctl_stop( 'sbc_cpl_snd: wrong definition of sn_snd_alb%clcat' )
2156             END SELECT
2157          CASE( 'weighted ice' )   ;
2158             SELECT CASE( sn_snd_alb%clcat )
2159             CASE( 'yes' )   
2160                ztmp3(:,:,1:jpl) =  alb_ice(:,:,1:jpl) * a_i(:,:,1:jpl)
2161             CASE( 'no' )
2162                WHERE( fr_i (:,:) > 0. )
2163                   ztmp1(:,:) = SUM (  alb_ice(:,:,1:jpl) * a_i(:,:,1:jpl), dim=3 )
2164                ELSEWHERE
2165                   ztmp1(:,:) = 0.
2166                END WHERE
2167             CASE default   ;   CALL ctl_stop( 'sbc_cpl_snd: wrong definition of sn_snd_ice%clcat' )
2168             END SELECT
2169          CASE default      ;   CALL ctl_stop( 'sbc_cpl_snd: wrong definition of sn_snd_alb%cldes' )
2170         END SELECT
2171
2172         SELECT CASE( sn_snd_alb%clcat )
2173            CASE( 'yes' )   
2174               CALL cpl_snd( jps_albice, isec, ztmp3, info )      !-> MV this has never been checked in coupled mode
2175            CASE( 'no'  )   
2176               CALL cpl_snd( jps_albice, isec, RESHAPE ( ztmp1, (/jpi,jpj,1/) ), info ) 
2177         END SELECT
2178      ENDIF
2179
2180      IF( ssnd(jps_albmix)%laction ) THEN                         ! mixed ice-ocean
2181         ztmp1(:,:) = alb_oce_mix(:,:) * zfr_l(:,:)
2182         DO jl = 1, jpl
2183            ztmp1(:,:) = ztmp1(:,:) + alb_ice(:,:,jl) * a_i(:,:,jl)
2184         END DO
2185         CALL cpl_snd( jps_albmix, isec, RESHAPE ( ztmp1, (/jpi,jpj,1/) ), info )
2186      ENDIF
2187      !                                                      ! ------------------------- !
2188      !                                                      !  Ice fraction & Thickness !
2189      !                                                      ! ------------------------- !
2190      ! Send ice fraction field to atmosphere
2191      IF( ssnd(jps_fice)%laction ) THEN
2192         SELECT CASE( sn_snd_thick%clcat )
2193         CASE( 'yes' )   ;   ztmp3(:,:,1:jpl) =  a_i(:,:,1:jpl)
2194         CASE( 'no'  )   ;   ztmp3(:,:,1    ) = fr_i(:,:      )
2195         CASE default    ;   CALL ctl_stop( 'sbc_cpl_snd: wrong definition of sn_snd_thick%clcat' )
2196         END SELECT
2197         IF( ssnd(jps_fice)%laction )   CALL cpl_snd( jps_fice, isec, ztmp3, info )
2198      ENDIF
2199
2200      IF( ssnd(jps_fice1)%laction ) THEN
2201         SELECT CASE( sn_snd_thick1%clcat )
2202         CASE( 'yes' )   ;   ztmp3(:,:,1:jpl) =  a_i(:,:,1:jpl)
2203         CASE( 'no'  )   ;   ztmp3(:,:,1    ) = fr_i(:,:      )
2204         CASE default    ;   CALL ctl_stop( 'sbc_cpl_snd: wrong definition of sn_snd_thick1%clcat' )
2205         END SELECT
2206         CALL cpl_snd( jps_fice1, isec, ztmp3, info )
2207      ENDIF
2208     
2209      ! Send ice fraction field to OPA (sent by SAS in SAS-OPA coupling)
2210      IF( ssnd(jps_fice2)%laction ) THEN
2211         ztmp3(:,:,1) = fr_i(:,:)
2212         IF( ssnd(jps_fice2)%laction )   CALL cpl_snd( jps_fice2, isec, ztmp3, info )
2213      ENDIF
2214
2215      ! Send ice and snow thickness field
2216      IF( ssnd(jps_hice)%laction .OR. ssnd(jps_hsnw)%laction ) THEN
2217         SELECT CASE( sn_snd_thick%cldes)
2218         CASE( 'none'                  )       ! nothing to do
2219         CASE( 'weighted ice and snow' )   
2220            SELECT CASE( sn_snd_thick%clcat )
2221            CASE( 'yes' )   
2222               ztmp3(:,:,1:jpl) =  h_i(:,:,1:jpl) * a_i(:,:,1:jpl)
2223               ztmp4(:,:,1:jpl) =  h_s(:,:,1:jpl) * a_i(:,:,1:jpl)
2224            CASE( 'no' )
2225               ztmp3(:,:,:) = 0.0   ;  ztmp4(:,:,:) = 0.0
2226               DO jl=1,jpl
2227                  ztmp3(:,:,1) = ztmp3(:,:,1) + h_i(:,:,jl) * a_i(:,:,jl)
2228                  ztmp4(:,:,1) = ztmp4(:,:,1) + h_s(:,:,jl) * a_i(:,:,jl)
2229               ENDDO
2230            CASE default                  ;   CALL ctl_stop( 'sbc_cpl_snd: wrong definition of sn_snd_thick%clcat' )
2231            END SELECT
2232         CASE( 'ice and snow'         )   
2233            SELECT CASE( sn_snd_thick%clcat )
2234            CASE( 'yes' )
2235               ztmp3(:,:,1:jpl) = h_i(:,:,1:jpl)
2236               ztmp4(:,:,1:jpl) = h_s(:,:,1:jpl)
2237            CASE( 'no' )
2238               WHERE( SUM( a_i, dim=3 ) /= 0. )
2239                  ztmp3(:,:,1) = SUM( h_i * a_i, dim=3 ) / SUM( a_i, dim=3 )
2240                  ztmp4(:,:,1) = SUM( h_s * a_i, dim=3 ) / SUM( a_i, dim=3 )
2241               ELSEWHERE
2242                 ztmp3(:,:,1) = 0.
2243                 ztmp4(:,:,1) = 0.
2244               END WHERE
2245            CASE default                  ;   CALL ctl_stop( 'sbc_cpl_snd: wrong definition of sn_snd_thick%clcat' )
2246            END SELECT
2247         CASE default                     ;   CALL ctl_stop( 'sbc_cpl_snd: wrong definition of sn_snd_thick%cldes' )
2248         END SELECT
2249         IF( ssnd(jps_hice)%laction )   CALL cpl_snd( jps_hice, isec, ztmp3, info )
2250         IF( ssnd(jps_hsnw)%laction )   CALL cpl_snd( jps_hsnw, isec, ztmp4, info )
2251      ENDIF
2252
2253#if defined key_si3
2254      !                                                      ! ------------------------- !
2255      !                                                      !      Ice melt ponds       !
2256      !                                                      ! ------------------------- !
2257      ! needed by Met Office
2258      IF( ssnd(jps_a_p)%laction .OR. ssnd(jps_ht_p)%laction ) THEN
2259         SELECT CASE( sn_snd_mpnd%cldes) 
2260         CASE( 'ice only' ) 
2261            SELECT CASE( sn_snd_mpnd%clcat ) 
2262            CASE( 'yes' ) 
2263               ztmp3(:,:,1:jpl) =  a_ip(:,:,1:jpl)
2264               ztmp4(:,:,1:jpl) =  v_ip(:,:,1:jpl) 
2265            CASE( 'no' ) 
2266               ztmp3(:,:,:) = 0.0 
2267               ztmp4(:,:,:) = 0.0 
2268               DO jl=1,jpl 
2269                 ztmp3(:,:,1) = ztmp3(:,:,1) + a_ip(:,:,jpl) 
2270                 ztmp4(:,:,1) = ztmp4(:,:,1) + v_ip(:,:,jpl) 
2271               ENDDO 
2272            CASE default   ;   CALL ctl_stop( 'sbc_cpl_snd: wrong definition of sn_snd_mpnd%clcat' ) 
2273            END SELECT 
2274         CASE default      ;   CALL ctl_stop( 'sbc_cpl_snd: wrong definition of sn_snd_mpnd%cldes' )     
2275         END SELECT 
2276         IF( ssnd(jps_a_p)%laction  )   CALL cpl_snd( jps_a_p , isec, ztmp3, info )     
2277         IF( ssnd(jps_ht_p)%laction )   CALL cpl_snd( jps_ht_p, isec, ztmp4, info )     
2278      ENDIF 
2279      !
2280      !                                                      ! ------------------------- !
2281      !                                                      !     Ice conductivity      !
2282      !                                                      ! ------------------------- !
2283      ! needed by Met Office
2284      IF( ssnd(jps_kice)%laction ) THEN
2285         SELECT CASE( sn_snd_cond%cldes) 
2286         CASE( 'weighted ice' )   
2287            SELECT CASE( sn_snd_cond%clcat ) 
2288            CASE( 'yes' )   
2289          ztmp3(:,:,1:jpl) =  cnd_ice(:,:,1:jpl) * a_i(:,:,1:jpl) 
2290            CASE( 'no' ) 
2291               ztmp3(:,:,:) = 0.0 
2292               DO jl=1,jpl 
2293                 ztmp3(:,:,1) = ztmp3(:,:,1) + cnd_ice(:,:,jl) * a_i(:,:,jl) 
2294               ENDDO 
2295            CASE default   ;   CALL ctl_stop( 'sbc_cpl_snd: wrong definition of sn_snd_cond%clcat' ) 
2296            END SELECT
2297         CASE( 'ice only' )   
2298           ztmp3(:,:,1:jpl) = cnd_ice(:,:,1:jpl) 
2299         CASE default      ;   CALL ctl_stop( 'sbc_cpl_snd: wrong definition of sn_snd_cond%cldes' )     
2300         END SELECT
2301         IF( ssnd(jps_kice)%laction )   CALL cpl_snd( jps_kice, isec, ztmp3, info ) 
2302      ENDIF 
2303#endif
2304
2305      !                                                      ! ------------------------- !
2306      !                                                      !  CO2 flux from PISCES     !
2307      !                                                      ! ------------------------- !
2308      IF( ssnd(jps_co2)%laction .AND. l_co2cpl )   CALL cpl_snd( jps_co2, isec, RESHAPE ( oce_co2, (/jpi,jpj,1/) ) , info )
2309      !
2310      !                                                      ! ------------------------- !
2311      IF( ssnd(jps_ocx1)%laction ) THEN                      !      Surface current      !
2312         !                                                   ! ------------------------- !
2313         !   
2314         !                                                  j+1   j     -----V---F
2315         ! surface velocity always sent from T point                     !       |
2316         !                                                        j      |   T   U
2317         !                                                               |       |
2318         !                                                   j    j-1   -I-------|
2319         !                                               (for I)         |       |
2320         !                                                              i-1  i   i
2321         !                                                               i      i+1 (for I)
2322         IF( nn_components == jp_iam_opa ) THEN
2323            zotx1(:,:) = un(:,:,1) 
2324            zoty1(:,:) = vn(:,:,1) 
2325         ELSE       
2326            SELECT CASE( TRIM( sn_snd_crt%cldes ) )
2327            CASE( 'oce only'             )      ! C-grid ==> T
2328               DO jj = 2, jpjm1
2329                  DO ji = fs_2, fs_jpim1   ! vector opt.
2330                     zotx1(ji,jj) = 0.5 * ( un(ji,jj,1) + un(ji-1,jj  ,1) )
2331                     zoty1(ji,jj) = 0.5 * ( vn(ji,jj,1) + vn(ji  ,jj-1,1) ) 
2332                  END DO
2333               END DO
2334            CASE( 'weighted oce and ice' )      ! Ocean and Ice on C-grid ==> T 
2335               DO jj = 2, jpjm1
2336                  DO ji = fs_2, fs_jpim1   ! vector opt.
2337                     zotx1(ji,jj) = 0.5 * ( un   (ji,jj,1) + un   (ji-1,jj  ,1) ) * zfr_l(ji,jj) 
2338                     zoty1(ji,jj) = 0.5 * ( vn   (ji,jj,1) + vn   (ji  ,jj-1,1) ) * zfr_l(ji,jj)
2339                     zitx1(ji,jj) = 0.5 * ( u_ice(ji,jj  ) + u_ice(ji-1,jj    ) ) *  fr_i(ji,jj)
2340                     zity1(ji,jj) = 0.5 * ( v_ice(ji,jj  ) + v_ice(ji  ,jj-1  ) ) *  fr_i(ji,jj)
2341                  END DO
2342               END DO
2343               CALL lbc_lnk_multi( 'sbccpl', zitx1, 'T', -1., zity1, 'T', -1. )
2344            CASE( 'mixed oce-ice'        )      ! Ocean and Ice on C-grid ==> T
2345               DO jj = 2, jpjm1
2346                  DO ji = fs_2, fs_jpim1   ! vector opt.
2347                     zotx1(ji,jj) = 0.5 * ( un   (ji,jj,1) + un   (ji-1,jj  ,1) ) * zfr_l(ji,jj)   &
2348                        &         + 0.5 * ( u_ice(ji,jj  ) + u_ice(ji-1,jj    ) ) *  fr_i(ji,jj)
2349                     zoty1(ji,jj) = 0.5 * ( vn   (ji,jj,1) + vn   (ji  ,jj-1,1) ) * zfr_l(ji,jj)   &
2350                        &         + 0.5 * ( v_ice(ji,jj  ) + v_ice(ji  ,jj-1  ) ) *  fr_i(ji,jj)
2351                  END DO
2352               END DO
2353            END SELECT
2354            CALL lbc_lnk_multi( 'sbccpl', zotx1, ssnd(jps_ocx1)%clgrid, -1.,  zoty1, ssnd(jps_ocy1)%clgrid, -1. )
2355            !
2356         ENDIF
2357         !
2358         !
2359         IF( TRIM( sn_snd_crt%clvor ) == 'eastward-northward' ) THEN             ! Rotation of the components
2360            !                                                                     ! Ocean component
2361            CALL rot_rep( zotx1, zoty1, ssnd(jps_ocx1)%clgrid, 'ij->e', ztmp1 )       ! 1st component
2362            CALL rot_rep( zotx1, zoty1, ssnd(jps_ocx1)%clgrid, 'ij->n', ztmp2 )       ! 2nd component
2363            zotx1(:,:) = ztmp1(:,:)                                                   ! overwrite the components
2364            zoty1(:,:) = ztmp2(:,:)
2365            IF( ssnd(jps_ivx1)%laction ) THEN                                     ! Ice component
2366               CALL rot_rep( zitx1, zity1, ssnd(jps_ivx1)%clgrid, 'ij->e', ztmp1 )    ! 1st component
2367               CALL rot_rep( zitx1, zity1, ssnd(jps_ivx1)%clgrid, 'ij->n', ztmp2 )    ! 2nd component
2368               zitx1(:,:) = ztmp1(:,:)                                                ! overwrite the components
2369               zity1(:,:) = ztmp2(:,:)
2370            ENDIF
2371         ENDIF
2372         !
2373         ! spherical coordinates to cartesian -> 2 components to 3 components
2374         IF( TRIM( sn_snd_crt%clvref ) == 'cartesian' ) THEN
2375            ztmp1(:,:) = zotx1(:,:)                     ! ocean currents
2376            ztmp2(:,:) = zoty1(:,:)
2377            CALL oce2geo ( ztmp1, ztmp2, 'T', zotx1, zoty1, zotz1 )
2378            !
2379            IF( ssnd(jps_ivx1)%laction ) THEN           ! ice velocities
2380               ztmp1(:,:) = zitx1(:,:)
2381               ztmp1(:,:) = zity1(:,:)
2382               CALL oce2geo ( ztmp1, ztmp2, 'T', zitx1, zity1, zitz1 )
2383            ENDIF
2384         ENDIF
2385         !
2386         IF( ssnd(jps_ocx1)%laction )   CALL cpl_snd( jps_ocx1, isec, RESHAPE ( zotx1, (/jpi,jpj,1/) ), info )   ! ocean x current 1st grid
2387         IF( ssnd(jps_ocy1)%laction )   CALL cpl_snd( jps_ocy1, isec, RESHAPE ( zoty1, (/jpi,jpj,1/) ), info )   ! ocean y current 1st grid
2388         IF( ssnd(jps_ocz1)%laction )   CALL cpl_snd( jps_ocz1, isec, RESHAPE ( zotz1, (/jpi,jpj,1/) ), info )   ! ocean z current 1st grid
2389         !
2390         IF( ssnd(jps_ivx1)%laction )   CALL cpl_snd( jps_ivx1, isec, RESHAPE ( zitx1, (/jpi,jpj,1/) ), info )   ! ice   x current 1st grid
2391         IF( ssnd(jps_ivy1)%laction )   CALL cpl_snd( jps_ivy1, isec, RESHAPE ( zity1, (/jpi,jpj,1/) ), info )   ! ice   y current 1st grid
2392         IF( ssnd(jps_ivz1)%laction )   CALL cpl_snd( jps_ivz1, isec, RESHAPE ( zitz1, (/jpi,jpj,1/) ), info )   ! ice   z current 1st grid
2393         !
2394      ENDIF
2395      !
2396      !                                                      ! ------------------------- !
2397      !                                                      !  Surface current to waves !
2398      !                                                      ! ------------------------- !
2399      IF( ssnd(jps_ocxw)%laction .OR. ssnd(jps_ocyw)%laction ) THEN 
2400          !     
2401          !                                                  j+1  j     -----V---F
2402          ! surface velocity always sent from T point                    !       |
2403          !                                                       j      |   T   U
2404          !                                                              |       |
2405          !                                                   j   j-1   -I-------|
2406          !                                               (for I)        |       |
2407          !                                                             i-1  i   i
2408          !                                                              i      i+1 (for I)
2409          SELECT CASE( TRIM( sn_snd_crtw%cldes ) ) 
2410          CASE( 'oce only'             )      ! C-grid ==> T
2411             DO jj = 2, jpjm1 
2412                DO ji = fs_2, fs_jpim1   ! vector opt.
2413                   zotx1(ji,jj) = 0.5 * ( un(ji,jj,1) + un(ji-1,jj  ,1) ) 
2414                   zoty1(ji,jj) = 0.5 * ( vn(ji,jj,1) + vn(ji , jj-1,1) ) 
2415                END DO
2416             END DO
2417          CASE( 'weighted oce and ice' )      ! Ocean and Ice on C-grid ==> T   
2418             DO jj = 2, jpjm1 
2419                DO ji = fs_2, fs_jpim1   ! vector opt.
2420                   zotx1(ji,jj) = 0.5 * ( un   (ji,jj,1) + un   (ji-1,jj  ,1) ) * zfr_l(ji,jj)   
2421                   zoty1(ji,jj) = 0.5 * ( vn   (ji,jj,1) + vn   (ji  ,jj-1,1) ) * zfr_l(ji,jj) 
2422                   zitx1(ji,jj) = 0.5 * ( u_ice(ji,jj  ) + u_ice(ji-1,jj    ) ) *  fr_i(ji,jj) 
2423                   zity1(ji,jj) = 0.5 * ( v_ice(ji,jj  ) + v_ice(ji  ,jj-1  ) ) *  fr_i(ji,jj) 
2424                END DO
2425             END DO
2426             CALL lbc_lnk_multi( 'sbccpl', zitx1, 'T', -1.,  zity1, 'T', -1. ) 
2427          CASE( 'mixed oce-ice'        )      ! Ocean and Ice on C-grid ==> T 
2428             DO jj = 2, jpjm1 
2429                DO ji = fs_2, fs_jpim1   ! vector opt.
2430                   zotx1(ji,jj) = 0.5 * ( un   (ji,jj,1) + un   (ji-1,jj  ,1) ) * zfr_l(ji,jj)   & 
2431                      &         + 0.5 * ( u_ice(ji,jj  ) + u_ice(ji-1,jj    ) ) *  fr_i(ji,jj) 
2432                   zoty1(ji,jj) = 0.5 * ( vn   (ji,jj,1) + vn   (ji  ,jj-1,1) ) * zfr_l(ji,jj)   & 
2433                      &         + 0.5 * ( v_ice(ji,jj  ) + v_ice(ji  ,jj-1  ) ) *  fr_i(ji,jj) 
2434                END DO
2435             END DO
2436          END SELECT
2437         CALL lbc_lnk_multi( 'sbccpl', zotx1, ssnd(jps_ocxw)%clgrid, -1., zoty1, ssnd(jps_ocyw)%clgrid, -1. ) 
2438         !
2439         !
2440         IF( TRIM( sn_snd_crtw%clvor ) == 'eastward-northward' ) THEN             ! Rotation of the components
2441         !                                                                        ! Ocean component
2442            CALL rot_rep( zotx1, zoty1, ssnd(jps_ocxw)%clgrid, 'ij->e', ztmp1 )       ! 1st component 
2443            CALL rot_rep( zotx1, zoty1, ssnd(jps_ocxw)%clgrid, 'ij->n', ztmp2 )       ! 2nd component 
2444            zotx1(:,:) = ztmp1(:,:)                                                   ! overwrite the components 
2445            zoty1(:,:) = ztmp2(:,:) 
2446            IF( ssnd(jps_ivx1)%laction ) THEN                                     ! Ice component
2447               CALL rot_rep( zitx1, zity1, ssnd(jps_ivx1)%clgrid, 'ij->e', ztmp1 )    ! 1st component 
2448               CALL rot_rep( zitx1, zity1, ssnd(jps_ivx1)%clgrid, 'ij->n', ztmp2 )    ! 2nd component 
2449               zitx1(:,:) = ztmp1(:,:)                                                ! overwrite the components 
2450               zity1(:,:) = ztmp2(:,:) 
2451            ENDIF
2452         ENDIF 
2453         !
2454!         ! spherical coordinates to cartesian -> 2 components to 3 components
2455!         IF( TRIM( sn_snd_crtw%clvref ) == 'cartesian' ) THEN
2456!            ztmp1(:,:) = zotx1(:,:)                     ! ocean currents
2457!            ztmp2(:,:) = zoty1(:,:)
2458!            CALL oce2geo ( ztmp1, ztmp2, 'T', zotx1, zoty1, zotz1 )
2459!            !
2460!            IF( ssnd(jps_ivx1)%laction ) THEN           ! ice velocities
2461!               ztmp1(:,:) = zitx1(:,:)
2462!               ztmp1(:,:) = zity1(:,:)
2463!               CALL oce2geo ( ztmp1, ztmp2, 'T', zitx1, zity1, zitz1 )
2464!            ENDIF
2465!         ENDIF
2466         !
2467         IF( ssnd(jps_ocxw)%laction )   CALL cpl_snd( jps_ocxw, isec, RESHAPE ( zotx1, (/jpi,jpj,1/) ), info )   ! ocean x current 1st grid
2468         IF( ssnd(jps_ocyw)%laction )   CALL cpl_snd( jps_ocyw, isec, RESHAPE ( zoty1, (/jpi,jpj,1/) ), info )   ! ocean y current 1st grid
2469         
2470      ENDIF 
2471      !
2472      IF( ssnd(jps_ficet)%laction ) THEN
2473         CALL cpl_snd( jps_ficet, isec, RESHAPE ( fr_i, (/jpi,jpj,1/) ), info ) 
2474      END IF 
2475      !                                                      ! ------------------------- !
2476      !                                                      !   Water levels to waves   !
2477      !                                                      ! ------------------------- !
2478      IF( ssnd(jps_wlev)%laction ) THEN
2479         IF( ln_apr_dyn ) THEN 
2480            IF( kt /= nit000 ) THEN 
2481               ztmp1(:,:) = sshb(:,:) - 0.5 * ( ssh_ib(:,:) + ssh_ibb(:,:) ) 
2482            ELSE 
2483               ztmp1(:,:) = sshb(:,:) 
2484            ENDIF 
2485         ELSE 
2486            ztmp1(:,:) = sshn(:,:) 
2487         ENDIF 
2488         CALL cpl_snd( jps_wlev  , isec, RESHAPE ( ztmp1, (/jpi,jpj,1/) ), info ) 
2489      END IF 
2490      !
2491      !  Fields sent by OPA to SAS when doing OPA<->SAS coupling
2492      !                                                        ! SSH
2493      IF( ssnd(jps_ssh )%laction )  THEN
2494         !                          ! removed inverse barometer ssh when Patm
2495         !                          forcing is used (for sea-ice dynamics)
2496         IF( ln_apr_dyn ) THEN   ;   ztmp1(:,:) = sshb(:,:) - 0.5 * ( ssh_ib(:,:) + ssh_ibb(:,:) )
2497         ELSE                    ;   ztmp1(:,:) = sshn(:,:)
2498         ENDIF
2499         CALL cpl_snd( jps_ssh   , isec, RESHAPE ( ztmp1            , (/jpi,jpj,1/) ), info )
2500
2501      ENDIF
2502      !                                                        ! SSS
2503      IF( ssnd(jps_soce  )%laction )  THEN
2504         CALL cpl_snd( jps_soce  , isec, RESHAPE ( tsn(:,:,1,jp_sal), (/jpi,jpj,1/) ), info )
2505      ENDIF
2506      !                                                        ! first T level thickness
2507      IF( ssnd(jps_e3t1st )%laction )  THEN
2508         CALL cpl_snd( jps_e3t1st, isec, RESHAPE ( e3t_n(:,:,1)   , (/jpi,jpj,1/) ), info )
2509      ENDIF
2510      !                                                        ! Qsr fraction
2511      IF( ssnd(jps_fraqsr)%laction )  THEN
2512         CALL cpl_snd( jps_fraqsr, isec, RESHAPE ( fraqsr_1lev(:,:) , (/jpi,jpj,1/) ), info )
2513      ENDIF
2514      !
2515      !  Fields sent by SAS to OPA when OASIS coupling
2516      !                                                        ! Solar heat flux
2517      IF( ssnd(jps_qsroce)%laction )  CALL cpl_snd( jps_qsroce, isec, RESHAPE ( qsr , (/jpi,jpj,1/) ), info )
2518      IF( ssnd(jps_qnsoce)%laction )  CALL cpl_snd( jps_qnsoce, isec, RESHAPE ( qns , (/jpi,jpj,1/) ), info )
2519      IF( ssnd(jps_oemp  )%laction )  CALL cpl_snd( jps_oemp  , isec, RESHAPE ( emp , (/jpi,jpj,1/) ), info )
2520      IF( ssnd(jps_sflx  )%laction )  CALL cpl_snd( jps_sflx  , isec, RESHAPE ( sfx , (/jpi,jpj,1/) ), info )
2521      IF( ssnd(jps_otx1  )%laction )  CALL cpl_snd( jps_otx1  , isec, RESHAPE ( utau, (/jpi,jpj,1/) ), info )
2522      IF( ssnd(jps_oty1  )%laction )  CALL cpl_snd( jps_oty1  , isec, RESHAPE ( vtau, (/jpi,jpj,1/) ), info )
2523      IF( ssnd(jps_rnf   )%laction )  CALL cpl_snd( jps_rnf   , isec, RESHAPE ( rnf , (/jpi,jpj,1/) ), info )
2524      IF( ssnd(jps_taum  )%laction )  CALL cpl_snd( jps_taum  , isec, RESHAPE ( taum, (/jpi,jpj,1/) ), info )
2525
2526#if defined key_si3
2527      !                                                      ! ------------------------- !
2528      !                                                      ! Sea surface freezing temp !
2529      !                                                      ! ------------------------- !
2530      ! needed by Met Office
2531      CALL eos_fzp(tsn(:,:,1,jp_sal), sstfrz)
2532      ztmp1(:,:) = sstfrz(:,:) + rt0
2533      IF( ssnd(jps_sstfrz)%laction )  CALL cpl_snd( jps_sstfrz, isec, RESHAPE ( ztmp1, (/jpi,jpj,1/) ), info)
2534#endif
2535      !
2536   END SUBROUTINE sbc_cpl_snd
2537   
2538   !!======================================================================
2539END MODULE sbccpl
Note: See TracBrowser for help on using the repository browser.