New URL for NEMO forge!   http://forge.nemo-ocean.eu

Since March 2022 along with NEMO 4.2 release, the code development moved to a self-hosted GitLab.
This present forge is now archived and remained online for history.
step.F90 in NEMO/branches/2019/dev_r10721_KERNEL-02_Storkey_Coward_IMMERSE_first_steps/src/OCE – NEMO

source: NEMO/branches/2019/dev_r10721_KERNEL-02_Storkey_Coward_IMMERSE_first_steps/src/OCE/step.F90 @ 10980

Last change on this file since 10980 was 10980, checked in by acc, 5 years ago

2019/dev_r10721_KERNEL-02_Storkey_Coward_IMMERSE_first_steps : interface changes to traldf routines for design compliance and consistency. SETTE tested (GYRE_PISCES, only)

  • Property svn:keywords set to Id
File size: 22.7 KB
RevLine 
[3]1MODULE step
2   !!======================================================================
3   !!                       ***  MODULE step  ***
[6140]4   !! Time-stepping   : manager of the ocean, tracer and ice time stepping
[3]5   !!======================================================================
[1438]6   !! History :  OPA  !  1991-03  (G. Madec)  Original code
[1492]7   !!             -   !  1991-11  (G. Madec)
8   !!             -   !  1992-06  (M. Imbard)  add a first output record
9   !!             -   !  1996-04  (G. Madec)  introduction of dynspg
10   !!             -   !  1996-04  (M.A. Foujols)  introduction of passive tracer
[1438]11   !!            8.0  !  1997-06  (G. Madec)  new architecture of call
12   !!            8.2  !  1997-06  (G. Madec, M. Imbard, G. Roullet)  free surface
13   !!             -   !  1999-02  (G. Madec, N. Grima)  hpg implicit
14   !!             -   !  2000-07  (J-M Molines, M. Imbard)  Open Bondary Conditions
15   !!   NEMO     1.0  !  2002-06  (G. Madec)  free form, suppress macro-tasking
16   !!             -   !  2004-08  (C. Talandier) New trends organization
[1492]17   !!             -   !  2005-01  (C. Ethe) Add the KPP closure scheme
18   !!             -   !  2005-11  (G. Madec)  Reorganisation of tra and dyn calls
19   !!             -   !  2006-01  (L. Debreu, C. Mazauric)  Agrif implementation
20   !!             -   !  2006-07  (S. Masson)  restart using iom
[1438]21   !!            3.2  !  2009-02  (G. Madec, R. Benshila)  reintroduicing z*-coordinate
[1533]22   !!             -   !  2009-06  (S. Masson, G. Madec)  TKE restart compatible with key_cpl
[2528]23   !!            3.3  !  2010-05  (K. Mogensen, A. Weaver, M. Martin, D. Lea) Assimilation interface
24   !!             -   !  2010-10  (C. Ethe, G. Madec) reorganisation of initialisation phase + merge TRC-TRA
[3294]25   !!            3.4  !  2011-04  (G. Madec, C. Ethe) Merge of dtatem and dtasal
[5836]26   !!            3.6  !  2012-07  (J. Simeon, G. Madec. C. Ethe)  Online coarsening of outputs
27   !!            3.6  !  2014-04  (F. Roquet, G. Madec) New equations of state
[7646]28   !!            3.6  !  2014-10  (E. Clementi, P. Oddo) Add Qiao vertical mixing in case of waves
[5836]29   !!            3.7  !  2014-10  (G. Madec)  LDF simplication
30   !!             -   !  2014-12  (G. Madec) remove KPP scheme
[9019]31   !!             -   !  2015-11  (J. Chanut) free surface simplification (remove filtered free surface)
32   !!            4.0  !  2017-05  (G. Madec)  introduction of the vertical physics manager (zdfphy)
[3]33   !!----------------------------------------------------------------------
[888]34
35   !!----------------------------------------------------------------------
[2528]36   !!   stp             : OPA system time-stepping
[3]37   !!----------------------------------------------------------------------
[3764]38   USE step_oce         ! time stepping definition modules
[6140]39   !
40   USE iom              ! xIOs server
[389]41
[3]42   IMPLICIT NONE
43   PRIVATE
44
[5836]45   PUBLIC   stp   ! called by nemogcm.F90
[10876]46   PUBLIC   update_pointers ! called by nemo_init
[3]47
48   !!----------------------------------------------------------------------
[10880]49   !! time level indices
50   !!----------------------------------------------------------------------
51   INTEGER, PUBLIC :: Nbb, Nnn, Naa, Nrhs          !! used by nemo_init
52
53   !!----------------------------------------------------------------------
[9598]54   !! NEMO/OCE 4.0 , NEMO Consortium (2018)
[888]55   !! $Id$
[10068]56   !! Software governed by the CeCILL license (see ./LICENSE)
[3]57   !!----------------------------------------------------------------------
58CONTAINS
59
[508]60#if defined key_agrif
[5656]61   RECURSIVE SUBROUTINE stp( )
[1438]62      INTEGER             ::   kstp   ! ocean time-step index
[508]63#else
[467]64   SUBROUTINE stp( kstp )
[1438]65      INTEGER, INTENT(in) ::   kstp   ! ocean time-step index
[467]66#endif
67      !!----------------------------------------------------------------------
[3]68      !!                     ***  ROUTINE stp  ***
[3764]69      !!
[9019]70      !! ** Purpose : - Time stepping of OPA  (momentum and active tracer eqs.)
[9570]71      !!              - Time stepping of SI3 (dynamic and thermodynamic eqs.)
[9019]72      !!              - Time stepping of TRC  (passive tracer eqs.)
[3764]73      !!
74      !! ** Method  : -1- Update forcings and data
75      !!              -2- Update ocean physics
76      !!              -3- Compute the t and s trends
77      !!              -4- Update t and s
[3]78      !!              -5- Compute the momentum trends
79      !!              -6- Update the horizontal velocity
[5836]80      !!              -7- Compute the diagnostics variables (rd,N2, hdiv,w)
[3]81      !!              -8- Outputs and diagnostics
82      !!----------------------------------------------------------------------
[9019]83      INTEGER ::   ji, jj, jk   ! dummy loop indice
84      INTEGER ::   indic        ! error indicator if < 0
85!!gm kcall can be removed, I guess
86      INTEGER ::   kcall        ! optional integer argument (dom_vvl_sf_nxt)
[3]87      !! ---------------------------------------------------------------------
[392]88#if defined key_agrif
[389]89      kstp = nit000 + Agrif_Nb_Step()
[5836]90      IF( lk_agrif_debug ) THEN
91         IF( Agrif_Root() .and. lwp)   WRITE(*,*) '---'
92         IF(lwp)   WRITE(*,*) 'Grid Number', Agrif_Fixed(),' time step ', kstp, 'int tstep', Agrif_NbStepint()
[5656]93      ENDIF
[5836]94      IF( kstp == nit000 + 1 )   lk_agrif_fstep = .FALSE.
[1793]95# if defined key_iomput
[5407]96      IF( Agrif_Nbstepint() == 0 )   CALL iom_swap( cxios_context )
[3764]97# endif
98#endif
[9124]99      !
100      IF( ln_timing )   CALL timing_start('stp')
101      !
[5836]102      !>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
103      ! update I/O and calendar
104      !<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
105                             indic = 0                ! reset to no error condition
106                             
107      IF( kstp == nit000 ) THEN                       ! initialize IOM context (must be done after nemo_init for AGRIF+XIOS+OASIS)
108                             CALL iom_init(      cxios_context          )  ! for model grid (including passible AGRIF zoom)
109         IF( ln_crs      )   CALL iom_init( TRIM(cxios_context)//"_crs" )  ! for coarse grid
[4152]110      ENDIF
[1725]111      IF( kstp /= nit000 )   CALL day( kstp )         ! Calendar (day was already called at nit000 in day_init)
[5836]112                             CALL iom_setkt( kstp - nit000 + 1,      cxios_context          )   ! tell IOM we are at time step kstp
113      IF( ln_crs         )   CALL iom_setkt( kstp - nit000 + 1, TRIM(cxios_context)//"_crs" )   ! tell IOM we are at time step kstp
[3]114
115      !>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
[5836]116      ! Update external forcing (tides, open boundaries, and surface boundary condition (including sea-ice)
[3]117      !<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
[7646]118      IF( ln_tide    )   CALL sbc_tide( kstp )                   ! update tide potential
[5836]119      IF( ln_apr_dyn )   CALL sbc_apr ( kstp )                   ! atmospheric pressure (NB: call before bdy_dta which needs ssh_ib)
[10957]120      IF( ln_bdy     )   CALL bdy_dta ( kstp,      Nnn, time_offset=+1 )  ! update dynamic & tracer data at open boundaries
121                         CALL sbc     ( kstp, Nbb, Nnn )                  ! Sea Boundary Condition (including sea-ice)
[5836]122
[3]123      !>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
[5329]124      ! Update stochastic parameters and random T/S fluctuations
125      !>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
[6464]126      IF( ln_sto_eos ) CALL sto_par( kstp )          ! Stochastic parameters
127      IF( ln_sto_eos ) CALL sto_pts( tsn  )          ! Random T/S fluctuations
[5329]128
129      !>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
[9490]130      ! Ocean physics update
[3]131      !<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
[4990]132      !  THERMODYNAMICS
[10954]133                         CALL eos_rab( tsb, rab_b, Nnn )       ! before local thermal/haline expension ratio at T-points
134                         CALL eos_rab( tsn, rab_n, Nnn )       ! now    local thermal/haline expension ratio at T-points
135                         CALL bn2    ( tsb, rab_b, rn2b, Nnn ) ! before Brunt-Vaisala frequency
136                         CALL bn2    ( tsn, rab_n, rn2, Nnn  ) ! now    Brunt-Vaisala frequency
[5836]137
[3764]138      !  VERTICAL PHYSICS
[10946]139                         CALL zdf_phy( kstp, Nbb, Nnn, Nrhs )   ! vertical physics update (top/bot drag, avt, avs, avm + MLD)
[5836]140
[3764]141      !  LATERAL  PHYSICS
[1492]142      !
[5836]143      IF( l_ldfslp ) THEN                             ! slope of lateral mixing
[5120]144                         CALL eos( tsb, rhd, gdept_0(:,:,:) )               ! before in situ density
[5836]145
[10954]146         IF( ln_zps .AND. .NOT. ln_isfcav)                                    &
147            &            CALL zps_hde    ( kstp, Nnn, jpts, tsb, gtsu, gtsv,  &  ! Partial steps: before horizontal gradient
148            &                                          rhd, gru , grv    )       ! of t, s, rd at the last ocean level
[5836]149
[10954]150         IF( ln_zps .AND.       ln_isfcav)                                                &
151            &            CALL zps_hde_isf( kstp, Nnn, jpts, tsb, gtsu, gtsv, gtui, gtvi,  &  ! Partial steps for top cell (ISF)
152            &                                          rhd, gru , grv , grui, grvi   )       ! of t, s, rd at the first ocean level
[5836]153         IF( ln_traldf_triad ) THEN
[10922]154                         CALL ldf_slp_triad( kstp, Nbb, Nnn )             ! before slope for triad operator
[5836]155         ELSE     
[10922]156                         CALL ldf_slp     ( kstp, rhd, rn2b, Nbb, Nnn )   ! before slope for standard operator
[2528]157         ENDIF
[1481]158      ENDIF
[10922]159      !                                                                        ! eddy diffusivity coeff.
160      IF( l_ldftra_time .OR. l_ldfeiv_time )   CALL ldf_tra( kstp, Nbb, Nnn )  !       and/or eiv coeff.
161      IF( l_ldfdyn_time                    )   CALL ldf_dyn( kstp, Nbb )       ! eddy viscosity coeff.
[3]162
[4369]163      !>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
[5930]164      !  Ocean dynamics : hdiv, ssh, e3, u, v, w
[4369]165      !<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
[5930]166
[10978]167                            CALL ssh_nxt       ( kstp, Nbb, Nnn, ssh, Naa )    ! after ssh (includes call to div_hor)
168      IF( .NOT.ln_linssh )  CALL dom_vvl_sf_nxt( kstp, Nbb, Nnn,      Naa )    ! after vertical scale factors
169                            CALL wzv           ( kstp, Nbb, Nnn, ww,  Naa )    ! now cross-level velocity
170      IF( ln_zad_Aimp )     CALL wAimp         ( kstp,      Nnn           )  ! Adaptive-implicit vertical advection partitioning
[6140]171                            CALL eos    ( tsn, rhd, rhop, gdept_n(:,:,:) )  ! now in situ density for hpg computation
172                           
[5930]173!!jc: fs simplification
[6140]174!!jc: lines below are useless if ln_linssh=F. Keep them here (which maintains a bug if ln_linssh=T and ln_zps=T, cf ticket #1636)
[5930]175!!                                         but ensures reproductible results
176!!                                         with previous versions using split-explicit free surface         
[10954]177            IF( ln_zps .AND. .NOT. ln_isfcav )                                    &
178               &            CALL zps_hde    ( kstp, Nnn, jpts, tsn, gtsu, gtsv,   &  ! Partial steps: before horizontal gradient
179               &                                          rhd, gru , grv     )       ! of t, s, rd at the last ocean level
180            IF( ln_zps .AND.       ln_isfcav )                                               &
181               &            CALL zps_hde_isf( kstp, Nnn, jpts, tsn, gtsu, gtsv, gtui, gtvi,  &  ! Partial steps for top cell (ISF)
182               &                                          rhd, gru , grv , grui, grvi   )       ! of t, s, rd at the first ocean level
[5930]183!!jc: fs simplification
[7753]184                           
[10874]185                         ua(:,:,:) = 0._wp            ! set dynamics trends to zero
186                         va(:,:,:) = 0._wp
[4369]187
[5930]188      IF(  lk_asminc .AND. ln_asmiau .AND. ln_dyninc )   &
[10969]189               &         CALL dyn_asm_inc   ( kstp, Nbb, Nnn, uu, vv, Nrhs )  ! apply dynamics assimilation increment
190      IF( ln_bdy     )   CALL bdy_dyn3d_dmp ( kstp, Nbb,      uu, vv, Nrhs )  ! bdy damping trends
[4369]191#if defined key_agrif
[5930]192      IF(.NOT. Agrif_Root())  & 
193               &         CALL Agrif_Sponge_dyn        ! momentum sponge
[4369]194#endif
[10877]195                         CALL dyn_adv( kstp, Nbb, Nnn      , uu, vv, Nrhs )  ! advection (VF or FF)   ==> RHS
196                         CALL dyn_vor( kstp,      Nnn      , uu, vv, Nrhs )  ! vorticity              ==> RHS
[10928]197                         CALL dyn_ldf( kstp, Nbb, Nnn      , uu, vv, Nrhs )  ! lateral mixing
[10883]198      IF( ln_zdfosm  )   CALL dyn_osm( kstp,      Nnn      , uu, vv, Nrhs )  ! OSMOSIS non-local velocity fluxes ==> RHS
[10946]199                         CALL dyn_hpg( kstp,      Nnn      , uu, vv, Nrhs )  ! horizontal gradient of Hydrostatic pressure
[10928]200                         CALL dyn_spg( kstp, Nbb, Nnn, Nrhs, uu, vv, ssh, uu_b, vv_b, Naa )  ! surface pressure gradient
[4369]201
[5930]202                                                      ! With split-explicit free surface, since now transports have been updated and ssha as well
203      IF( ln_dynspg_ts ) THEN                         ! vertical scale factors and vertical velocity need to be updated
[10978]204                            CALL div_hor       ( kstp, Nbb, Nnn )    ! Horizontal divergence  (2nd call in time-split case)
205         IF(.NOT.ln_linssh) CALL dom_vvl_sf_nxt( kstp, Nbb, Nnn, Naa, kcall=2 )  ! after vertical scale factors (update depth average component)
206                            CALL wzv        ( kstp, Nbb, Nnn, ww, Naa )  ! now cross-level velocity
207         IF( ln_zad_Aimp )  CALL wAimp      ( kstp,      Nnn )           ! Adaptive-implicit vertical advection partitioning
[4369]208      ENDIF
[9019]209     
[10884]210                         CALL dyn_zdf( kstp, Nbb, Nnn, Nrhs, uu, vv, Naa  )  ! vertical diffusion     ==> after
[5930]211
[1482]212      !>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
[6140]213      ! cool skin
214      !<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<     
[10927]215      IF ( ln_diurnal )  CALL diurnal_layers( kstp )
[6140]216     
217      !>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
[9490]218      ! diagnostics and outputs
[1482]219      !<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
[10970]220      IF( lk_floats  )   CALL flo_stp ( kstp, Nbb, Nnn )   ! drifting Floats
221      IF( ln_diacfl  )   CALL dia_cfl ( kstp,      Nnn )   ! Courant number diagnostics
222      IF( lk_diahth  )   CALL dia_hth ( kstp,      Nnn )   ! Thermocline depth (20 degres isotherm depth)
223      IF( lk_diadct  )   CALL dia_dct ( kstp,      Nnn )   ! Transports
224                         CALL dia_ar5 ( kstp,      Nnn )   ! ar5 diag
225      IF( lk_diaharm )   CALL dia_harm( kstp,      Nnn )   ! Tidal harmonic analysis
226                         CALL dia_wri ( kstp,      Nnn )   ! ocean model: outputs
[4152]227      !
[10970]228      IF( ln_crs     )   CALL crs_fld ( kstp,      Nnn )   ! ocean model: online field coarsening & output
[6140]229     
[923]230#if defined key_top
[3]231      !>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
232      ! Passive Tracer Model
233      !<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
[10905]234                         CALL trc_stp       ( kstp, Nbb, Nnn, Nrhs, Naa )  ! time-stepping
[3]235#endif
236
237      !>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
[5930]238      ! Active tracers                             
[3]239      !<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
[10874]240                         tsa(:,:,:,:) = 0._wp         ! set tracer trends to zero
[3]241
[5656]242      IF(  lk_asminc .AND. ln_asmiau .AND. &
[10969]243         & ln_trainc )   CALL tra_asm_inc   ( kstp, Nbb, Nnn, ts, Nrhs )  ! apply tracer assimilation increment
244                         CALL tra_sbc       ( kstp,      Nnn, Nrhs )  ! surface boundary condition
245      IF( ln_traqsr  )   CALL tra_qsr       ( kstp,      Nnn, Nrhs )  ! penetrative solar radiation qsr
246      IF( ln_trabbc  )   CALL tra_bbc       ( kstp,      Nnn, Nrhs )  ! bottom heat flux
[10954]247      IF( ln_trabbl  )   CALL tra_bbl       ( kstp, Nbb, Nnn, Nrhs )  ! advective (and/or diffusive) bottom boundary layer scheme
248      IF( ln_tradmp  )   CALL tra_dmp       ( kstp, Nbb, Nnn, Nrhs )  ! internal damping trends
[10957]249      IF( ln_bdy     )   CALL bdy_tra_dmp   ( kstp, Nbb, ts, Nrhs )  ! bdy damping trends
[392]250#if defined key_agrif
[5930]251      IF(.NOT. Agrif_Root())  & 
252               &         CALL Agrif_Sponge_tra        ! tracers sponge
[389]253#endif
[10880]254                         CALL tra_adv( kstp, Nbb, Nnn      , ts, Nrhs )  ! hor. + vert. advection  ==> RHS
[10883]255      IF( ln_zdfosm  )   CALL tra_osm( kstp,      Nnn      , ts, Nrhs )  ! OSMOSIS non-local tracer fluxes ==> RHS
[9019]256      IF( lrst_oce .AND. ln_zdfosm ) &
[10954]257           &             CALL osm_rst( kstp,      Nnn, 'WRITE' )         ! write OSMOSIS outputs + wn (so must do here) to restarts
[10980]258                         CALL tra_ldf( kstp, Nbb, Nnn      , ts, Nrhs )  ! lateral mixing
[1239]259
[5930]260!!gm : why CALL to dia_ptr has been moved here??? (use trends info?)
[10965]261      IF( ln_diaptr  )   CALL dia_ptr( Nnn )                 ! Poleward adv/ldf TRansports diagnostics
[5836]262!!gm
[10884]263                         CALL tra_zdf( kstp, Nbb, Nnn, Nrhs, ts, Naa  )  ! vert. mixing & after tracer   ==> after
[10946]264      IF( ln_zdfnpc  )   CALL tra_npc( kstp,      Nnn, Nrhs           )  ! update after fields by non-penetrative convection
[1481]265
[3]266      !>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
[5930]267      ! Set boundary conditions and Swap
[3]268      !<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
[5930]269!!jc1: For agrif, it would be much better to finalize tracers/momentum here (e.g. bdy conditions) and move the swap
270!!    (and time filtering) after Agrif update. Then restart would be done after and would contain updated fields.
271!!    If so:
272!!    (i) no need to call agrif update at initialization time
273!!    (ii) no need to update "before" fields
274!!
275!!    Apart from creating new tra_swp/dyn_swp routines, this however:
276!!    (i) makes boundary conditions at initialization time computed from updated fields which is not the case between
277!!    two restarts => restartability issue. One can circumvent this, maybe, by assuming "interface separation",
278!!    e.g. a shift of the feedback interface inside child domain.
279!!    (ii) requires that all restart outputs of updated variables by agrif (e.g. passive tracers/tke/barotropic arrays) are done at the same
280!!    place.
281!!
[6140]282!!jc2: dynnxt must be the latest call. e3t_b are indeed updated in that routine
[10957]283                         CALL tra_nxt       ( kstp, Nbb, Nnn, Nrhs, Naa )  ! finalize (bcs) tracer fields at next time step and swap
284                         CALL dyn_nxt       ( kstp, Nbb, Nnn, Naa  )  ! finalize (bcs) velocities at next time step and swap (always called after tra_nxt)
[10978]285                         CALL ssh_swp       ( kstp, Nbb, Nnn, Naa )  ! swap of sea surface height
286      IF(.NOT.ln_linssh) CALL dom_vvl_sf_swp( kstp, Nbb, Nnn, Naa )  ! swap of vertical scale factors
[5656]287      !
[10965]288      IF( ln_diahsb  )   CALL dia_hsb       ( kstp, Nbb, Nnn )  ! - ML - global conservation diagnostics
[5836]289
290!!gm : This does not only concern the dynamics ==>>> add a new title
291!!gm2: why ouput restart before AGRIF update?
[5930]292!!
293!!jc: That would be better, but see comment above
294!!
[10922]295      IF( lrst_oce   )   CALL rst_write    ( kstp, Nbb, Nnn )   ! write output ocean restart file
[9210]296      IF( ln_sto_eos )   CALL sto_rst_write( kstp )   ! write restart file for stochastic parameters
[593]297
[5656]298#if defined key_agrif
299      !>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
300      ! AGRIF
301      !<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<     
[9485]302                         CALL Agrif_Integrate_ChildGrids( stp )  ! allows to finish all the Child Grids before updating
[5656]303
[9780]304                         IF( Agrif_NbStepint() == 0 ) CALL Agrif_update_all( ) ! Update all components
[9485]305#endif
[10922]306      IF( ln_diaobs  )   CALL dia_obs      ( kstp, Nnn )      ! obs-minus-model (assimilation) diagnostics (call after dynamics update)
[2528]307
[3]308      !>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
[5656]309      ! Control
[3]310      !<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
[10965]311                         CALL stp_ctl      ( kstp, Nnn, indic )
[9210]312                         
313      IF( kstp == nit000 ) THEN                          ! 1st time step only
314                                        CALL iom_close( numror )   ! close input  ocean restart file
315         IF(lwm)                        CALL FLUSH    ( numond )   ! flush output namelist oce
316         IF(lwm .AND. numoni /= -1 )    CALL FLUSH    ( numoni )   ! flush output namelist ice (if exist)
[1482]317      ENDIF
[3]318
[508]319      !>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
[75]320      ! Coupled mode
321      !<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
[5836]322!!gm why lk_oasis and not lk_cpl ????
[10922]323      IF( lk_oasis   )   CALL sbc_cpl_snd( kstp, Nnn )     ! coupled mode : field exchanges
[508]324      !
[4153]325#if defined key_iomput
326      IF( kstp == nitend .OR. indic < 0 ) THEN
[5407]327                      CALL iom_context_finalize(      cxios_context          ) ! needed for XIOS+AGRIF
[9367]328                      IF(lrxios) CALL iom_context_finalize(      crxios_context          )
[5407]329         IF( ln_crs ) CALL iom_context_finalize( trim(cxios_context)//"_crs" ) !
[4152]330      ENDIF
[4153]331#endif
[3769]332      !
[9210]333      IF( ln_timing )   CALL timing_stop('stp')
[1481]334      !
[3]335   END SUBROUTINE stp
[6140]336   
[10905]337   SUBROUTINE update_pointers( Kbb, Kmm, Kaa )
[10876]338      !!----------------------------------------------------------------------
339      !!                     ***  ROUTINE update_pointers  ***
340      !!
341      !! ** Purpose :   Associate temporary pointer arrays.
342      !!                For IMMERSE development phase only - to be deleted
343      !!
344      !! ** Method  :
345      !!----------------------------------------------------------------------
[10905]346      INTEGER, INTENT( in ) :: Kbb, Kmm, Kaa ! time level indices
[10876]347
[10905]348      ub => uu(:,:,:,Kbb); un => uu(:,:,:,Kmm); ua => uu(:,:,:,Kaa)
349      vb => vv(:,:,:,Kbb); vn => vv(:,:,:,Kmm); va => vv(:,:,:,Kaa)
[10876]350      wn => ww(:,:,:)
351      hdivn => hdiv(:,:,:)
352
[10919]353      sshb =>  ssh(:,:,Kbb); sshn =>  ssh(:,:,Kmm); ssha =>  ssh(:,:,Kaa)
354      ub_b => uu_b(:,:,Kbb); un_b => uu_b(:,:,Kmm); ua_b => uu_b(:,:,Kaa)
355      vb_b => vv_b(:,:,Kbb); vn_b => vv_b(:,:,Kmm); va_b => vv_b(:,:,Kaa)
356
[10905]357      tsb => ts(:,:,:,:,Kbb); tsn => ts(:,:,:,:,Kmm); tsa => ts(:,:,:,:,Kaa)
[10876]358
[10905]359      e3t_b => e3t(:,:,:,Kbb); e3t_n => e3t(:,:,:,Kmm); e3t_a => e3t(:,:,:,Kaa)
360      e3u_b => e3u(:,:,:,Kbb); e3u_n => e3u(:,:,:,Kmm); e3u_a => e3u(:,:,:,Kaa)
361      e3v_b => e3v(:,:,:,Kbb); e3v_n => e3v(:,:,:,Kmm); e3v_a => e3v(:,:,:,Kaa)
[10876]362
363      e3f_n => e3f(:,:,:)
364
[10905]365      e3w_b  => e3w (:,:,:,Kbb); e3w_n  => e3w (:,:,:,Kmm)
366      e3uw_b => e3uw(:,:,:,Kbb); e3uw_n => e3uw(:,:,:,Kmm)
367      e3vw_b => e3vw(:,:,:,Kbb); e3vw_n => e3vw(:,:,:,Kmm)
[10876]368
[10905]369      gdept_b => gdept(:,:,:,Kbb); gdept_n => gdept(:,:,:,Kmm) 
370      gdepw_b => gdepw(:,:,:,Kbb); gdepw_n => gdepw(:,:,:,Kmm) 
[10876]371      gde3w_n => gde3w(:,:,:)
372
373   END SUBROUTINE update_pointers
374
[9019]375   !!======================================================================
[3]376END MODULE step
Note: See TracBrowser for help on using the repository browser.